staging: comedi: cb_pcidas: change dac bit enums into defines

The 'bits' for the DAC_CSR register are currently defined as
enums. All the other registers use defines for the bit definitions.
Change the dac bit enums to defines to follow the other registers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c
index 9e21e68..0188cf1 100644 (file)
--- a/drivers/staging/comedi/drivers/cb_pcidas.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas.c
@@ -140,11 +140,10 @@ analog triggering on 1602 series
 #define   CAL_EN_BIT   0x4000  /*  read calibration source instead of analog input channel 0 */
 #define   SERIAL_DATA_IN_BIT   0x8000  /*  serial data stream going to 8800 and 7376 */
 
-#define DAC_CSR        0x8             /*  dac control and status register */
-enum dac_csr_bits {
-       DACEN = 0x2,            /*  dac enable */
-       DAC_MODE_UPDATE_BOTH = 0x80,    /*  update both dacs when dac0 is written */
-};
+#define DAC_CSR                        0x8     /* dac control and status register */
+#define   DACEN                        0x02    /* dac enable */
+#define   DAC_MODE_UPDATE_BOTH 0x80    /* update both dacs */
+
 static inline unsigned int DAC_RANGE(unsigned int channel, unsigned int range)
 {
        return (range & 0x3) << (8 + 2 * (channel & 0x1));
@@ -156,14 +155,13 @@ static inline unsigned int DAC_RANGE_MASK(unsigned int channel)
 };
 
 /* bits for 1602 series only */
-enum dac_csr_bits_1602 {
-       DAC_EMPTY = 0x1,        /*  dac fifo empty, read, write clear */
-       DAC_START = 0x4,        /*  start/arm dac fifo operations */
-       DAC_PACER_MASK = 0x18,  /*  bits that set dac pacer source */
-       DAC_PACER_INT = 0x8,    /*  dac internal pacing */
-       DAC_PACER_EXT_FALL = 0x10,      /*  dac external pacing, falling edge */
-       DAC_PACER_EXT_RISE = 0x18,      /*  dac external pacing, rising edge */
-};
+#define   DAC_EMPTY            0x1     /*  fifo empty, read, write clear */
+#define   DAC_START            0x4     /*  start/arm fifo operations */
+#define   DAC_PACER_MASK       0x18    /*  bits that set pacer source */
+#define   DAC_PACER_INT                0x8     /*  int. pacing */
+#define   DAC_PACER_EXT_FALL   0x10    /*  ext. pacing, falling edge */
+#define   DAC_PACER_EXT_RISE   0x18    /*  ext. pacing, rising edge */
+
 static inline unsigned int DAC_CHAN_EN(unsigned int channel)
 {
        return 1 << (5 + (channel & 0x1));      /*  enable channel 0 or 1 */