USB: ftdi_sio: enable two UART ports on ST Microconnect Lite

The FT4232H used in the ST Micro Connect Lite has four hi-speed UART ports.
The first two ports are reserved for the JTAG interface.

We enable by default ports 2 and 3 as UARTs (where port 2 is a
conventional RS-232 UART)

Signed-off-by: Adrian Thomasset <adrian.thomasset@st.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index e4d7fbd..242b577 100644 (file)
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1789,20 +1789,24 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial)
 }
 
 /*
- * First and second port on STMCLiteadaptors is reserved for JTAG interface
- * and the forth port for pio
+ * First two ports on JTAG adaptors using an FT4232 such as STMicroelectronics's
+ * ST Micro Connect Lite are reserved for JTAG or other non-UART interfaces and
+ * can be accessed from userspace.
+ * The next two ports are enabled as UARTs by default, where port 2 is
+ * a conventional RS-232 UART.
  */
 static int ftdi_stmclite_probe(struct usb_serial *serial)
 {
        struct usb_device *udev = serial->dev;
        struct usb_interface *interface = serial->interface;
 
-       if (interface == udev->actconfig->interface[2])
-               return 0;
-
-       dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n");
+       if (interface == udev->actconfig->interface[0] ||
+           interface == udev->actconfig->interface[1]) {
+               dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n");
+               return -ENODEV;
+       }
 
-       return -ENODEV;
+       return 0;
 }
 
 /*