Add a function to write a SPI descriptor to the generated ACPI code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
#include <linux/errno.h>
#include <asm/spi.h>
#include <asm/state.h>
+#include <dm/acpi.h>
#include <dm/device-internal.h>
#ifndef CONFIG_SPI_IDLE_VAL
return 0;
}
+static int sandbox_spi_get_name(const struct udevice *dev, char *out_name)
+{
+ return acpi_copy_name(out_name, "SSPI");
+}
+
+struct acpi_ops sandbox_spi_acpi_ops = {
+ .get_name = sandbox_spi_get_name,
+};
+
static const struct dm_spi_ops sandbox_spi_ops = {
.xfer = sandbox_spi_xfer,
.set_speed = sandbox_spi_set_speed,
.id = UCLASS_SPI,
.of_match = sandbox_spi_ids,
.ops = &sandbox_spi_ops,
+ ACPI_OPS_PTR(&sandbox_spi_acpi_ops)
};
#define __ACPI_DEVICE_H
#include <i2c.h>
+#include <spi.h>
#include <linux/bitops.h>
struct acpi_ctx;
/* ACPI Descriptors for Serial Bus interfaces */
#define ACPI_SERIAL_BUS_TYPE_I2C 1
+#define ACPI_SERIAL_BUS_TYPE_SPI 2
#define ACPI_I2C_SERIAL_BUS_REVISION_ID 1 /* TODO: upgrade to 2 */
#define ACPI_I2C_TYPE_SPECIFIC_REVISION_ID 1
+#define ACPI_SPI_SERIAL_BUS_REVISION_ID 1
+#define ACPI_SPI_TYPE_SPECIFIC_REVISION_ID 1
/**
* struct acpi_i2c - representation of an ACPI I2C device
const char *resource;
};
+/**
+ * struct acpi_spi - representation of an ACPI SPI device
+ *
+ * @device_select: Chip select used by this device (typically 0)
+ * @device_select_polarity: Polarity for the device
+ * @wire_mode: Number of wires used for SPI
+ * @speed: Bus speed in Hz
+ * @data_bit_length: Word length for SPI (typically 8)
+ * @clock_phase: Clock phase to capture data
+ * @clock_polarity: Bus polarity
+ * @resource: Resource name for the SPI controller
+ */
+struct acpi_spi {
+ u16 device_select;
+ enum spi_polarity device_select_polarity;
+ enum spi_wire_mode wire_mode;
+ unsigned int speed;
+ u8 data_bit_length;
+ enum spi_clock_phase clock_phase;
+ enum spi_polarity clock_polarity;
+ const char *resource;
+};
+
/**
* acpi_device_path() - Get the full path to an ACPI device
*
*/
int acpi_device_write_i2c_dev(struct acpi_ctx *ctx, const struct udevice *dev);
+/**
+ * acpi_device_write_spi_dev() - Write a SPI device to ACPI
+ *
+ * This writes a serial bus descriptor for the SPI device so that ACPI can use
+ * it
+ *
+ * @ctx: ACPI context pointer
+ * @dev: SPI device to write
+ * @return 0 if OK, -ve on error
+ */
+int acpi_device_write_spi_dev(struct acpi_ctx *ctx, const struct udevice *dev);
+
#endif
#include <linux/bitops.h>
/* SPI mode flags */
-#define SPI_CPHA BIT(0) /* clock phase */
-#define SPI_CPOL BIT(1) /* clock polarity */
+#define SPI_CPHA BIT(0) /* clock phase (1 = SPI_CLOCK_PHASE_SECOND) */
+#define SPI_CPOL BIT(1) /* clock polarity (1 = SPI_POLARITY_HIGH) */
#define SPI_MODE_0 (0|0) /* (original MicroWire) */
#define SPI_MODE_1 (0|SPI_CPHA)
#define SPI_MODE_2 (SPI_CPOL|0)
return ret;
}
+
+#ifdef CONFIG_SPI
+/* ACPI 6.1 section 6.4.3.8.2.2 - SpiSerialBus() */
+static void acpi_device_write_spi(struct acpi_ctx *ctx, const struct acpi_spi *spi)
+{
+ void *desc_length, *type_length;
+ u16 flags = 0;
+
+ /* Byte 0: Descriptor Type */
+ acpigen_emit_byte(ctx, ACPI_DESCRIPTOR_SERIAL_BUS);
+
+ /* Byte 1+2: Length (filled in later) */
+ desc_length = largeres_write_len_f(ctx);
+
+ /* Byte 3: Revision ID */
+ acpigen_emit_byte(ctx, ACPI_SPI_SERIAL_BUS_REVISION_ID);
+
+ /* Byte 4: Resource Source Index is Reserved */
+ acpigen_emit_byte(ctx, 0);
+
+ /* Byte 5: Serial Bus Type is SPI */
+ acpigen_emit_byte(ctx, ACPI_SERIAL_BUS_TYPE_SPI);
+
+ /*
+ * Byte 6: Flags
+ * [7:2]: 0 => Reserved
+ * [1]: 1 => ResourceConsumer
+ * [0]: 0 => ControllerInitiated
+ */
+ acpigen_emit_byte(ctx, BIT(1));
+
+ /*
+ * Byte 7-8: Type Specific Flags
+ * [15:2]: 0 => Reserveda
+ * [1]: 0 => ActiveLow, 1 => ActiveHigh
+ * [0]: 0 => FourWire, 1 => ThreeWire
+ */
+ if (spi->wire_mode == SPI_3_WIRE_MODE)
+ flags |= BIT(0);
+ if (spi->device_select_polarity == SPI_POLARITY_HIGH)
+ flags |= BIT(1);
+ acpigen_emit_word(ctx, flags);
+
+ /* Byte 9: Type Specific Revision ID */
+ acpigen_emit_byte(ctx, ACPI_SPI_TYPE_SPECIFIC_REVISION_ID);
+
+ /* Byte 10-11: SPI Type Data Length */
+ type_length = largeres_write_len_f(ctx);
+
+ /* Byte 12-15: Connection Speed */
+ acpigen_emit_dword(ctx, spi->speed);
+
+ /* Byte 16: Data Bit Length */
+ acpigen_emit_byte(ctx, spi->data_bit_length);
+
+ /* Byte 17: Clock Phase */
+ acpigen_emit_byte(ctx, spi->clock_phase);
+
+ /* Byte 18: Clock Polarity */
+ acpigen_emit_byte(ctx, spi->clock_polarity);
+
+ /* Byte 19-20: Device Selection */
+ acpigen_emit_word(ctx, spi->device_select);
+
+ /* Fill in Type Data Length */
+ largeres_fill_len(ctx, type_length);
+
+ /* Byte 21+: ResourceSource String */
+ acpigen_emit_string(ctx, spi->resource);
+
+ /* Fill in SPI Descriptor Length */
+ largeres_fill_len(ctx, desc_length);
+}
+
+/**
+ * acpi_device_set_spi() - Set up an ACPI SPI struct from a device
+ *
+ * The value of @scope is not copied, but only referenced. This implies the
+ * caller has to ensure it stays valid for the lifetime of @spi.
+ *
+ * @dev: SPI device to convert
+ * @spi: Place to put the new structure
+ * @scope: Scope of the SPI device (this is the controller path)
+ * @return 0 (always)
+ */
+static int acpi_device_set_spi(const struct udevice *dev, struct acpi_spi *spi,
+ const char *scope)
+{
+ struct dm_spi_slave_platdata *plat;
+ struct spi_slave *slave = dev_get_parent_priv(dev);
+
+ plat = dev_get_parent_platdata(slave->dev);
+ memset(spi, '\0', sizeof(*spi));
+ spi->device_select = plat->cs;
+ spi->device_select_polarity = SPI_POLARITY_LOW;
+ spi->wire_mode = SPI_4_WIRE_MODE;
+ spi->speed = plat->max_hz;
+ spi->data_bit_length = slave->wordlen;
+ spi->clock_phase = plat->mode & SPI_CPHA ?
+ SPI_CLOCK_PHASE_SECOND : SPI_CLOCK_PHASE_FIRST;
+ spi->clock_polarity = plat->mode & SPI_CPOL ?
+ SPI_POLARITY_HIGH : SPI_POLARITY_LOW;
+ spi->resource = scope;
+
+ return 0;
+}
+
+int acpi_device_write_spi_dev(struct acpi_ctx *ctx, const struct udevice *dev)
+{
+ char scope[ACPI_PATH_MAX];
+ struct acpi_spi spi;
+ int ret;
+
+ ret = acpi_device_scope(dev, scope, sizeof(scope));
+ if (ret)
+ return log_msg_ret("scope", ret);
+ ret = acpi_device_set_spi(dev, &spi, scope);
+ if (ret)
+ return log_msg_ret("set", ret);
+ acpi_device_write_spi(ctx, &spi);
+
+ return 0;
+}
+#endif /* CONFIG_SPI */
return 0;
}
DM_TEST(dm_test_acpi_i2c, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+
+/* Test emitting a SPI descriptor */
+static int dm_test_acpi_spi(struct unit_test_state *uts)
+{
+ struct acpi_ctx *ctx;
+ struct udevice *dev;
+ u8 *ptr;
+
+ ut_assertok(alloc_context(&ctx));
+
+ ptr = acpigen_get_current(ctx);
+
+ ut_assertok(uclass_first_device_err(UCLASS_SPI_FLASH, &dev));
+ ut_assertok(acpi_device_write_spi_dev(ctx, dev));
+ ut_asserteq(31, acpigen_get_current(ctx) - ptr);
+ ut_asserteq(ACPI_DESCRIPTOR_SERIAL_BUS, ptr[0]);
+ ut_asserteq(28, get_unaligned((u16 *)(ptr + 1)));
+ ut_asserteq(ACPI_SPI_SERIAL_BUS_REVISION_ID, ptr[3]);
+ ut_asserteq(0, ptr[4]);
+ ut_asserteq(ACPI_SERIAL_BUS_TYPE_SPI, ptr[5]);
+ ut_asserteq(2, ptr[6]);
+ ut_asserteq(0, get_unaligned((u16 *)(ptr + 7)));
+ ut_asserteq(ACPI_SPI_TYPE_SPECIFIC_REVISION_ID, ptr[9]);
+ ut_asserteq(9, get_unaligned((u16 *)(ptr + 10)));
+ ut_asserteq(40000000, get_unaligned((u32 *)(ptr + 12)));
+ ut_asserteq(8, ptr[16]);
+ ut_asserteq(0, ptr[17]);
+ ut_asserteq(0, ptr[18]);
+ ut_asserteq(0, get_unaligned((u16 *)(ptr + 19)));
+ ut_asserteq_str("\\_SB.SPI0", (char *)ptr + 21);
+
+ free_context(&ctx);
+
+ return 0;
+}
+DM_TEST(dm_test_acpi_spi, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
git.openpandora.org / pandora-u-boot.git / commitdiff