otherwise choose R3000.
-config MIPS_EV64120
- bool "Galileo EV64120 Evaluation board (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- select DMA_NONCOHERENT
- select HW_HAS_PCI
- select PCI_GT64XXX_PCI0
- select SYS_HAS_CPU_R5000
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_KGDB
- help
- This is an evaluation board based on the Galileo GT-64120
- single-chip system controller that contains a MIPS R5000 compatible
- core running at 75/100MHz. Their website is located at
- <http://www.marvell.com/>. Say Y here if you wish to build a
- kernel for this platform.
-
config MACH_JAZZ
bool "Jazz family of machines"
select ARC
source "arch/mips/au1000/Kconfig"
source "arch/mips/ddb5xxx/Kconfig"
-source "arch/mips/gt64120/ev64120/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/lasat/Kconfig"
source "arch/mips/pmc-sierra/Kconfig"
#
choice
prompt "Galileo Chip Clock"
- #default SYSCLK_83 if MIPS_EV64120
- depends on MIPS_EV64120 || MOMENCO_OCELOT
- default SYSCLK_83 if MIPS_EV64120
+ depends on MOMENCO_OCELOT
default SYSCLK_100 if MOMENCO_OCELOT
-config SYSCLK_75
- bool "75" if MIPS_EV64120
-
-config SYSCLK_83
- bool "83.3" if MIPS_EV64120
-
config SYSCLK_100
- bool "100" if MIPS_EV64120 || MOMENCO_OCELOT
+ bool "100" if MOMENCO_OCELOT
endchoice
load-$(CONFIG_MACH_DECSTATION) += 0xffffffff80040000
CLEAN_FILES += drivers/tc/lk201-map.c
-#
-# Galileo EV64120 Board
-#
-core-$(CONFIG_MIPS_EV64120) += arch/mips/gt64120/ev64120/
-core-$(CONFIG_MIPS_EV64120) += arch/mips/gt64120/common/
-cflags-$(CONFIG_MIPS_EV64120) += -Iinclude/asm-mips/mach-ev64120
-load-$(CONFIG_MIPS_EV64120) += 0xffffffff80100000
-
#
# Wind River PPMC Board (4KC + GT64120)
#
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
CONFIG_MIPS_ATLAS=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
CONFIG_MIPS_COBALT=y
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
CONFIG_MACH_DECSTATION=y
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:30 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-CONFIG_MIPS_EV64120=y
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_EVB_PCI1 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_MIPS_GT64120=y
-# CONFIG_SYSCLK_75 is not set
-# CONFIG_SYSCLK_83 is not set
-CONFIG_SYSCLK_100=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-CONFIG_CPU_R5000=y
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_R5000=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-# CONFIG_PACKET is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_RAID_ATTRS=m
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-# CONFIG_HID is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs rw nfsroot=192.168.1.1:/mnt/disk2/fs.gal ip=192.168.1.211:192.168.1.1:::gt::"
-CONFIG_SYS_SUPPORTS_KGDB=y
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=m
-CONFIG_CRC32=m
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
# CONFIG_BASLER_EXCITE_PROTOTYPE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
CONFIG_MACH_JAZZ=y
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
CONFIG_LASAT=y
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
+++ /dev/null
-config EVB_PCI1
- bool "Enable Second PCI (PCI1)"
- depends on MIPS_EV64120
+++ /dev/null
-#
-# Copyright 2000 RidgeRun, Inc.
-# Author: RidgeRun, Inc.
-# glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
-#
-# Makefile for the Galileo EV64120 board.
-#
-
-obj-y += irq.o promcon.o reset.o serialGT.o setup.o
+++ /dev/null
-/*
- * BRIEF MODULE DESCRIPTION
- * Code to handle irqs on GT64120A boards
- * Derived from mips/orion and Cort <cort@fsmlabs.com>
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: RidgeRun, Inc.
- * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/bitops.h>
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-#include <asm/gt64120.h>
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
-
- if (pending & STATUSF_IP4) /* int2 hardware line (timer) */
- do_IRQ(4);
- else if (pending & STATUSF_IP2) /* int0 hardware line */
- do_IRQ(GT_INTA);
- else if (pending & STATUSF_IP5) /* int3 hardware line */
- do_IRQ(GT_INTD);
- else if (pending & STATUSF_IP6) /* int4 hardware line */
- do_IRQ(6);
- else if (pending & STATUSF_IP7) /* compare int */
- do_IRQ(7);
- else
- spurious_interrupt();
-}
-
-static void disable_ev64120_irq(unsigned int irq_nr)
-{
- if (irq_nr >= 8) { // All PCI interrupts are on line 5 or 2
- clear_c0_status(9 << 10);
- } else {
- clear_c0_status(1 << (irq_nr + 8));
- }
-}
-
-static void enable_ev64120_irq(unsigned int irq_nr)
-{
- if (irq_nr >= 8) // All PCI interrupts are on line 5 or 2
- set_c0_status(9 << 10);
- else
- set_c0_status(1 << (irq_nr + 8));
-}
-
-static void end_ev64120_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_ev64120_irq(irq);
-}
-
-static struct irq_chip ev64120_irq_type = {
- .name = "EV64120",
- .ack = disable_ev64120_irq,
- .mask = disable_ev64120_irq,
- .mask_ack = disable_ev64120_irq,
- .unmask = enable_ev64120_irq,
- .end = end_ev64120_irq,
-};
-
-void gt64120_irq_setup(void)
-{
- /*
- * Clear all of the interrupts while we change the able around a bit.
- */
- clear_c0_status(ST0_IM);
-
- /*
- * Enable timer. Other interrupts will be enabled as they are
- * registered.
- */
- set_c0_status(IE_IRQ2);
-}
-
-void __init arch_init_irq(void)
-{
- gt64120_irq_setup();
-}
+++ /dev/null
-/*
- * Wrap-around code for a console using the
- * SGI PROM io-routines.
- *
- * Copyright (c) 1999 Ulf Carlsson
- *
- * Derived from DECstation promcon.c
- * Copyright (c) 1998 Harald Koerfgen
- */
-#include <linux/tty.h>
-#include <linux/init.h>
-#include <linux/console.h>
-
-static void prom_console_write(struct console *co, const char *s,
- unsigned count)
-{
- extern int CONSOLE_CHANNEL; // The default serial port
- unsigned i;
-
- for (i = 0; i < count; i++) {
- if (*s == 10)
- serial_putc(CONSOLE_CHANNEL, 13);
- serial_putc(CONSOLE_CHANNEL, *s++);
- }
-}
-
-static struct console sercons = {
- .name = "ttyS",
- .write = prom_console_write,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-
-/*
- * Register console.
- */
-
-static int gal_serial_console_init(void)
-{
- // serial_init();
- //serial_set(115200);
-
- register_console(&sercons);
-
- return 0;
-}
-
-console_initcall(gal_serial_console_init);
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1997 Ralf Baechle
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/system.h>
-
-void galileo_machine_restart(char *command)
-{
- *(volatile char *) 0xbc000000 = 0x0f;
- /*
- * Ouch, we're still alive ... This time we take the silver bullet ...
- * ... and find that we leave the hardware in a state in which the
- * kernel in the flush locks up somewhen during of after the PCI
- * detection stuff.
- */
- set_c0_status(ST0_BEV | ST0_ERL);
- change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
- flush_cache_all();
- write_c0_wired(0);
- __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-}
-
-void galileo_machine_halt(void)
-{
- printk(KERN_NOTICE "You can safely turn off the power\n");
- while (1)
- __asm__(".set\tmips3\n\t"
- "wait\n\t"
- ".set\tmips0");
-
-}
-
-void galileo_machine_power_off(void)
-{
- galileo_machine_halt();
-}
+++ /dev/null
-/*
- * serialGT.c
- *
- * BRIEF MODULE DESCRIPTION
- * Low Level Serial Port control for use
- * with the Galileo EVB64120A MIPS eval board and
- * its on board two channel 16552 Uart.
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: RidgeRun, Inc.
- * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-// Note:
-// Serial CHANNELS - 0 is the bottom connector of evb64120A.
-// (The one that maps to the "B" channel of the
-// board's uart)
-// 1 is the top connector of evb64120A.
-// (The one that maps to the "A" channel of the
-// board's uart)
-int DEBUG_CHANNEL = 0; // See Note Above
-int CONSOLE_CHANNEL = 1; // See Note Above
-
-#define DUART 0xBD000000 /* Base address of Uart. */
-#define CHANNELOFFSET 0x20 /* DUART+CHANNELOFFSET gets you to the ChanA
- register set of the 16552 Uart device.
- DUART+0 gets you to the ChanB register set.
- */
-#define DUART_DELTA 0x4
-#define FIFO_ENABLE 0x07
-#define INT_ENABLE 0x04 /* default interrupt mask */
-
-#define RBR 0x00
-#define THR 0x00
-#define DLL 0x00
-#define IER 0x01
-#define DLM 0x01
-#define IIR 0x02
-#define FCR 0x02
-#define LCR 0x03
-#define MCR 0x04
-#define LSR 0x05
-#define MSR 0x06
-#define SCR 0x07
-
-#define LCR_DLAB 0x80
-#define XTAL 1843200
-#define LSR_THRE 0x20
-#define LSR_BI 0x10
-#define LSR_DR 0x01
-#define MCR_LOOP 0x10
-#define ACCESS_DELAY 0x10000
-
-/******************************
- Routine:
- Description:
- ******************************/
-int inreg(int channel, int reg)
-{
- int val;
- val =
- *((volatile unsigned char *) DUART +
- (channel * CHANNELOFFSET) + (reg * DUART_DELTA));
- return val;
-}
-
-/******************************
- Routine:
- Description:
- ******************************/
-void outreg(int channel, int reg, unsigned char val)
-{
- *((volatile unsigned char *) DUART + (channel * CHANNELOFFSET)
- + (reg * DUART_DELTA)) = val;
-}
-
-/******************************
- Routine:
- Description:
- Initialize the device driver.
- ******************************/
-void serial_init(int channel)
-{
- /*
- * Configure active port, (CHANNELOFFSET already set.)
- *
- * Set 8 bits, 1 stop bit, no parity.
- *
- * LCR<7> 0 divisor latch access bit
- * LCR<6> 0 break control (1=send break)
- * LCR<5> 0 stick parity (0=space, 1=mark)
- * LCR<4> 0 parity even (0=odd, 1=even)
- * LCR<3> 0 parity enable (1=enabled)
- * LCR<2> 0 # stop bits (0=1, 1=1.5)
- * LCR<1:0> 11 bits per character(00=5, 01=6, 10=7, 11=8)
- */
- outreg(channel, LCR, 0x3);
-
- outreg(channel, FCR, FIFO_ENABLE); /* Enable the FIFO */
-
- outreg(channel, IER, INT_ENABLE); /* Enable appropriate interrupts */
-}
-
-/******************************
- Routine:
- Description:
- Set the baud rate.
- ******************************/
-void serial_set(int channel, unsigned long baud)
-{
- unsigned char sav_lcr;
-
- /*
- * Enable access to the divisor latches by setting DLAB in LCR.
- *
- */
- sav_lcr = inreg(channel, LCR);
-
-#if 0
- /*
- * Set baud rate
- */
- outreg(channel, LCR, LCR_DLAB | sav_lcr);
- // outreg(DLL,(XTAL/(16*2*(baud))-2));
- outreg(channel, DLL, XTAL / (16 * baud));
- // outreg(DLM,(XTAL/(16*2*(baud))-2)>>8);
- outreg(channel, DLM, (XTAL / (16 * baud)) >> 8);
-#else
- /*
- * Note: Set baud rate, hardcoded here for rate of 115200
- * since became unsure of above "baud rate" algorithm (??).
- */
- outreg(channel, LCR, 0x83);
- outreg(channel, DLM, 0x00); // See note above
- outreg(channel, DLL, 0x02); // See note above.
- outreg(channel, LCR, 0x03);
-#endif
-
- /*
- * Restore line control register
- */
- outreg(channel, LCR, sav_lcr);
-}
-
-
-/******************************
- Routine:
- Description:
- Transmit a character.
- ******************************/
-void serial_putc(int channel, int c)
-{
- while ((inreg(channel, LSR) & LSR_THRE) == 0);
- outreg(channel, THR, c);
-}
-
-/******************************
- Routine:
- Description:
- Read a received character if one is
- available. Return -1 otherwise.
- ******************************/
-int serial_getc(int channel)
-{
- if (inreg(channel, LSR) & LSR_DR) {
- return inreg(channel, RBR);
- }
- return -1;
-}
-
-/******************************
- Routine:
- Description:
- Used by embedded gdb client. (example; gdb-stub.c)
- ******************************/
-char getDebugChar()
-{
- int val;
- while ((val = serial_getc(DEBUG_CHANNEL)) == -1); // loop until we get a character in.
- return (char) val;
-}
-
-/******************************
- Routine:
- Description:
- Used by embedded gdb target. (example; gdb-stub.c)
- ******************************/
-void putDebugChar(char c)
-{
- serial_putc(DEBUG_CHANNEL, (int) c);
-}
+++ /dev/null
-/*
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: RidgeRun, Inc.
- * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/timex.h>
-#include <linux/pm.h>
-
-#include <asm/bootinfo.h>
-#include <asm/page.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/pci.h>
-#include <asm/processor.h>
-#include <asm/time.h>
-#include <asm/reboot.h>
-#include <asm/traps.h>
-#include <linux/bootmem.h>
-
-unsigned long gt64120_base = KSEG1ADDR(0x14000000);
-
-/* These functions are used for rebooting or halting the machine*/
-extern void galileo_machine_restart(char *command);
-extern void galileo_machine_halt(void);
-extern void galileo_machine_power_off(void);
-/*
- *This structure holds pointers to the pci configuration space accesses
- *and interrupts allocating routine for device over the PCI
- */
-extern struct pci_ops galileo_pci_ops;
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-/*
- * Initializes basic routines and structures pointers, memory size (as
- * given by the bios and saves the command line.
- */
-
-void __init plat_mem_setup(void)
-{
- _machine_restart = galileo_machine_restart;
- _machine_halt = galileo_machine_halt;
- pm_power_off = galileo_machine_power_off;
-
- set_io_port_base(KSEG1);
-}
-
-const char *get_system_type(void)
-{
- return "Galileo EV64120A";
-}
-
-/*
- * Kernel arguments passed by the firmware
- *
- * $a0 - nothing
- * $a1 - holds a pointer to the eprom parameters
- * $a2 - nothing
- */
-
-void __init prom_init(void)
-{
- mips_machgroup = MACH_GROUP_GALILEO;
- mips_machtype = MACH_EV64120A;
-
- add_memory_region(0, 32 << 20, BOOT_MEM_RAM);
-}
obj-$(CONFIG_LASAT) += pci-lasat.o
obj-$(CONFIG_MIPS_ATLAS) += fixup-atlas.o
obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
-obj-$(CONFIG_MIPS_EV64120) += pci-ev64120.o
obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o
+++ /dev/null
-#include <linux/pci.h>
-#include <asm/irq.h>
-
-int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq;
-
- if (!pin)
- return 0;
-
- irq = allocate_irqno();
- if (irq < 0)
- return 0;
-
- return irq;
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}
#define MACH_GROUP_COSINE 10 /* CoSine Orion */
#define MACH_COSINE_ORION 0
-/*
- * Valid machtype for group GALILEO
- */
-#define MACH_GROUP_GALILEO 11 /* Galileo Eval Boards */
-#define MACH_EV64120A 0 /* EV64120A */
-
/*
* Valid machtype for group MOMENCO
*/
+++ /dev/null
-/*
- * This is a direct copy of the ev96100.h file, with a global
- * search and replace. The numbers are the same.
- *
- * The reason I'm duplicating this is so that the 64120/96100
- * defines won't be confusing in the source code.
- */
-#ifndef __ASM_GALILEO_BOARDS_MIPS_EV64120_H
-#define __ASM_GALILEO_BOARDS_MIPS_EV64120_H
-
-/*
- * GT64120 config space base address
- */
-extern unsigned long gt64120_base;
-
-#define GT64120_BASE (gt64120_base)
-
-/*
- * PCI Bus allocation
- */
-#define GT_PCI_MEM_BASE 0x12000000UL
-#define GT_PCI_MEM_SIZE 0x02000000UL
-#define GT_PCI_IO_BASE 0x10000000UL
-#define GT_PCI_IO_SIZE 0x02000000UL
-#define GT_ISA_IO_BASE PCI_IO_BASE
-
-/*
- * Duart I/O ports.
- */
-#define EV64120_COM1_BASE_ADDR (0x1d000000 + 0x20)
-#define EV64120_COM2_BASE_ADDR (0x1d000000 + 0x00)
-
-
-/*
- * EV64120 interrupt controller register base.
- */
-#define EV64120_ICTRL_REGS_BASE (KSEG1ADDR(0x1f000000))
-
-/*
- * EV64120 UART register base.
- */
-#define EV64120_UART0_REGS_BASE (KSEG1ADDR(EV64120_COM1_BASE_ADDR))
-#define EV64120_UART1_REGS_BASE (KSEG1ADDR(EV64120_COM2_BASE_ADDR))
-#define EV64120_BASE_BAUD ( 3686400 / 16 )
-#define EV64120_UART_IRQ 6
-
-/*
- * PCI interrupts will come in on either the INTA or INTD interrups lines,
- * which are mapped to the #2 and #5 interrupt pins of the MIPS. On our
- * boards, they all either come in on IntD or they all come in on IntA, they
- * aren't mixed. There can be numerous PCI interrupts, so we keep a list of the
- * "requested" interrupt numbers and go through the list whenever we get an
- * IntA/D.
- *
- * Interrupts < 8 are directly wired to the processor; PCI INTA is 8 and
- * INTD is 11.
- */
-#define GT_TIMER 4
-#define GT_INTA 2
-#define GT_INTD 5
-
-#endif /* __ASM_GALILEO_BOARDS_MIPS_EV64120_H */
#define JAZZ_SERIAL_PORT_DEFNS
#endif
-/*
- * Galileo EV64120 evaluation board
- */
-#ifdef CONFIG_MIPS_EV64120
-#include <mach-gt64120.h>
-#define EV64120_SERIAL_PORT_DEFNS \
- { .baud_base = EV64120_BASE_BAUD, .irq = EV64120_UART_IRQ, \
- .flags = STD_COM_FLAGS, \
- .iomem_base = EV64120_UART0_REGS_BASE, .iomem_reg_shift = 2, \
- .io_type = SERIAL_IO_MEM }, \
- { .baud_base = EV64120_BASE_BAUD, .irq = EV64120_UART_IRQ, \
- .flags = STD_COM_FLAGS, \
- .iomem_base = EV64120_UART1_REGS_BASE, .iomem_reg_shift = 2, \
- .io_type = SERIAL_IO_MEM },
-#else
-#define EV64120_SERIAL_PORT_DEFNS
-#endif
-
#ifdef CONFIG_HAVE_STD_PC_SERIAL_PORT
#define STD_SERIAL_PORT_DEFNS \
/* UART CLK PORT IRQ FLAGS */ \
#define SERIAL_PORT_DFNS \
DDB5477_SERIAL_PORT_DEFNS \
- EV64120_SERIAL_PORT_DEFNS \
IP32_SERIAL_PORT_DEFNS \
JAZZ_SERIAL_PORT_DEFNS \
STD_SERIAL_PORT_DEFNS \
git.openpandora.org / pandora-kernel.git / commitdiff