USB: ftd_sio: cleanups and updates for new termios work

- Remove can't happen tests
- Rework speed validation in terms of baud rates not CBAUD bits
- Report speed set (or chosen)
- Minor termios correctness

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8a8a6b9..a63c0aa 100644 (file)
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -294,7 +294,7 @@ struct ftdi_private {
 
        __u16 interface;        /* FT2232C port interface (0 for FT232/245) */
 
-       int force_baud;         /* if non-zero, force the baud rate to this value */
+       speed_t force_baud;     /* if non-zero, force the baud rate to this value */
        int force_rtscts;       /* if non-zero, force RTS-CTS to always be enabled */
 
        spinlock_t tx_lock;     /* spinlock for transmit state */
@@ -878,6 +878,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port)
                if (div_value == 0) {
                        dbg("%s - Baudrate (%d) requested is not supported", __FUNCTION__,  baud);
                        div_value = ftdi_sio_b9600;
+                       baud = 9600;
                        div_okay = 0;
                }
                break;
@@ -886,6 +887,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port)
                        div_value = ftdi_232am_baud_to_divisor(baud);
                } else {
                        dbg("%s - Baud rate too high!", __FUNCTION__);
+                       baud = 9600;
                        div_value = ftdi_232am_baud_to_divisor(9600);
                        div_okay = 0;
                }
@@ -899,6 +901,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port)
                        dbg("%s - Baud rate too high!", __FUNCTION__);
                        div_value = ftdi_232bm_baud_to_divisor(9600);
                        div_okay = 0;
+                       baud = 9600;
                }
                break;
        } /* priv->chip_type */
@@ -909,6 +912,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port)
                        ftdi_chip_name[priv->chip_type]);
        }
 
+       tty_encode_baud_rate(port->tty, baud, baud);
        return(div_value);
 }
 
@@ -1263,7 +1267,7 @@ static void ftdi_USB_UIRT_setup (struct ftdi_private *priv)
 
        priv->flags |= ASYNC_SPD_CUST;
        priv->custom_divisor = 77;
-       priv->force_baud = B38400;
+       priv->force_baud = 38400;
 } /* ftdi_USB_UIRT_setup */
 
 /* Setup for the HE-TIRA1 device, which requires hardwired
@@ -1274,7 +1278,7 @@ static void ftdi_HE_TIRA1_setup (struct ftdi_private *priv)
 
        priv->flags |= ASYNC_SPD_CUST;
        priv->custom_divisor = 240;
-       priv->force_baud = B38400;
+       priv->force_baud = 38400;
        priv->force_rtscts = 1;
 } /* ftdi_HE_TIRA1_setup */
 
@@ -1363,7 +1367,7 @@ static int  ftdi_open (struct usb_serial_port *port, struct file *filp)
 
        /* ftdi_set_termios  will send usb control messages */
        if (port->tty)
-               ftdi_set_termios(port, NULL);
+               ftdi_set_termios(port, port->tty->termios);
 
        /* FIXME: Flow control might be enabled, so it should be checked -
           we have no control of defaults! */
@@ -1933,32 +1937,32 @@ static void ftdi_break_ctl( struct usb_serial_port *port, int break_state )
 static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
 { /* ftdi_termios */
        struct usb_device *dev = port->serial->dev;
-       unsigned int cflag = port->tty->termios->c_cflag;
        struct ftdi_private *priv = usb_get_serial_port_data(port);
+       struct ktermios *termios = port->tty->termios;
+       unsigned int cflag = termios->c_cflag;
        __u16 urb_value; /* will hold the new flags */
        char buf[1]; /* Perhaps I should dynamically alloc this? */
 
        // Added for xon/xoff support
-       unsigned int iflag = port->tty->termios->c_iflag;
+       unsigned int iflag = termios->c_iflag;
        unsigned char vstop;
        unsigned char vstart;
 
        dbg("%s", __FUNCTION__);
 
        /* Force baud rate if this device requires it, unless it is set to B0. */
-       if (priv->force_baud && ((port->tty->termios->c_cflag & CBAUD) != B0)) {
+       if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) {
                dbg("%s: forcing baud rate for this device", __FUNCTION__);
-               port->tty->termios->c_cflag &= ~CBAUD;
-               port->tty->termios->c_cflag |= priv->force_baud;
+               tty_encode_baud_rate(port->tty, priv->force_baud, priv->force_baud);
        }
 
        /* Force RTS-CTS if this device requires it. */
        if (priv->force_rtscts) {
                dbg("%s: forcing rtscts for this device", __FUNCTION__);
-               port->tty->termios->c_cflag |= CRTSCTS;
+               termios->c_cflag |= CRTSCTS;
        }
 
-       cflag = port->tty->termios->c_cflag;
+       cflag = termios->c_cflag;
 
        /* FIXME -For this cut I don't care if the line is really changing or
           not  - so just do the change regardless  - should be able to
@@ -1969,6 +1973,8 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old
 
        /* Set number of data bits, parity, stop bits */
 
+       termios->c_cflag &= ~CMSPAR;
+
        urb_value = 0;
        urb_value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 :
                      FTDI_SIO_SET_DATA_STOP_BITS_1);
@@ -2048,8 +2054,8 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old
                        // Set the vstart and vstop -- could have been done up above where
                        // a lot of other dereferencing is done but that would be very
                        // inefficient as vstart and vstop are not always needed
-                       vstart=port->tty->termios->c_cc[VSTART];
-                       vstop=port->tty->termios->c_cc[VSTOP];
+                       vstart = termios->c_cc[VSTART];
+                       vstop = termios->c_cc[VSTOP];
                        urb_value=(vstop << 8) | (vstart);
 
                        if (usb_control_msg(dev,