}
}
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/AdjustLnaGainTbl */
+static void b43_nphy_adjust_lna_gain_table(struct b43_wldev *dev)
+{
+ struct b43_phy_n *nphy = dev->phy.n;
+
+ u8 i;
+ s16 tmp;
+ u16 data[4];
+ s16 gain[2];
+ u16 minmax[2];
+ static const u16 lna_gain[4] = { -2, 10, 19, 25 };
+
+ if (nphy->hang_avoid)
+ b43_nphy_stay_in_carrier_search(dev, 1);
+
+ if (nphy->gain_boost) {
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+ gain[0] = 6;
+ gain[1] = 6;
+ } else {
+ tmp = 40370 - 315 * dev->phy.channel;
+ gain[0] = ((tmp >> 13) + ((tmp >> 12) & 1));
+ tmp = 23242 - 224 * dev->phy.channel;
+ gain[1] = ((tmp >> 13) + ((tmp >> 12) & 1));
+ }
+ } else {
+ gain[0] = 0;
+ gain[1] = 0;
+ }
+
+ for (i = 0; i < 2; i++) {
+ if (nphy->elna_gain_config) {
+ data[0] = 19 + gain[i];
+ data[1] = 25 + gain[i];
+ data[2] = 25 + gain[i];
+ data[3] = 25 + gain[i];
+ } else {
+ data[0] = lna_gain[0] + gain[i];
+ data[1] = lna_gain[1] + gain[i];
+ data[2] = lna_gain[2] + gain[i];
+ data[3] = lna_gain[3] + gain[i];
+ }
+ b43_ntab_write_bulk(dev, B43_NTAB16(i, 8), 4, data);
+
+ minmax[i] = 23 + gain[i];
+ }
+
+ b43_phy_maskset(dev, B43_NPHY_C1_MINMAX_GAIN, ~B43_NPHY_C1_MINGAIN,
+ minmax[0] << B43_NPHY_C1_MINGAIN_SHIFT);
+ b43_phy_maskset(dev, B43_NPHY_C2_MINMAX_GAIN, ~B43_NPHY_C2_MINGAIN,
+ minmax[1] << B43_NPHY_C2_MINGAIN_SHIFT);
+
+ if (nphy->hang_avoid)
+ b43_nphy_stay_in_carrier_search(dev, 0);
+}
+
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/SetRfSeq */
static void b43_nphy_set_rf_sequence(struct b43_wldev *dev, u8 cmd,
u8 *events, u8 *delays, u8 length)
b43_nphy_rev2_rssi_select(dev, code, type);
}
+/**************************************************
+ * Workarounds
+ **************************************************/
+
+static void b43_nphy_gain_ctl_workarounds_rev3plus(struct b43_wldev *dev)
+{
+ struct ssb_sprom *sprom = dev->dev->bus_sprom;
+
+ bool ghz5;
+ bool ext_lna;
+ u16 rssi_gain;
+ struct nphy_gain_ctl_workaround_entry *e;
+ u8 lpf_gain[6] = { 0x00, 0x06, 0x0C, 0x12, 0x12, 0x12 };
+ u8 lpf_bits[6] = { 0, 1, 2, 3, 3, 3 };
+
+ /* Prepare values */
+ ghz5 = b43_phy_read(dev, B43_NPHY_BANDCTL)
+ & B43_NPHY_BANDCTL_5GHZ;
+ ext_lna = sprom->boardflags_lo & B43_BFL_EXTLNA;
+ e = b43_nphy_get_gain_ctl_workaround_ent(dev, ghz5, ext_lna);
+ if (ghz5 && dev->phy.rev >= 5)
+ rssi_gain = 0x90;
+ else
+ rssi_gain = 0x50;
+
+ b43_phy_set(dev, B43_NPHY_RXCTL, 0x0040);
+
+ /* Set Clip 2 detect */
+ b43_phy_set(dev, B43_NPHY_C1_CGAINI,
+ B43_NPHY_C1_CGAINI_CL2DETECT);
+ b43_phy_set(dev, B43_NPHY_C2_CGAINI,
+ B43_NPHY_C2_CGAINI_CL2DETECT);
+
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_BIASPOLE_LNAG1_IDAC,
+ 0x17);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_BIASPOLE_LNAG1_IDAC,
+ 0x17);
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_LNAG2_IDAC, 0xF0);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_LNAG2_IDAC, 0xF0);
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_RSSI_POLE, 0x00);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_RSSI_POLE, 0x00);
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_RSSI_GAIN,
+ rssi_gain);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_RSSI_GAIN,
+ rssi_gain);
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_BIASPOLE_LNAA1_IDAC,
+ 0x17);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_BIASPOLE_LNAA1_IDAC,
+ 0x17);
+ b43_radio_write(dev, B2056_RX0 | B2056_RX_LNAA2_IDAC, 0xFF);
+ b43_radio_write(dev, B2056_RX1 | B2056_RX_LNAA2_IDAC, 0xFF);
+
+ b43_ntab_write_bulk(dev, B43_NTAB8(0, 8), 4, e->lna1_gain);
+ b43_ntab_write_bulk(dev, B43_NTAB8(1, 8), 4, e->lna1_gain);
+ b43_ntab_write_bulk(dev, B43_NTAB8(0, 16), 4, e->lna2_gain);
+ b43_ntab_write_bulk(dev, B43_NTAB8(1, 16), 4, e->lna2_gain);
+ b43_ntab_write_bulk(dev, B43_NTAB8(0, 32), 10, e->gain_db);
+ b43_ntab_write_bulk(dev, B43_NTAB8(1, 32), 10, e->gain_db);
+ b43_ntab_write_bulk(dev, B43_NTAB8(2, 32), 10, e->gain_bits);
+ b43_ntab_write_bulk(dev, B43_NTAB8(3, 32), 10, e->gain_bits);
+ b43_ntab_write_bulk(dev, B43_NTAB8(0, 0x40), 6, lpf_gain);
+ b43_ntab_write_bulk(dev, B43_NTAB8(1, 0x40), 6, lpf_gain);
+ b43_ntab_write_bulk(dev, B43_NTAB8(2, 0x40), 6, lpf_bits);
+ b43_ntab_write_bulk(dev, B43_NTAB8(3, 0x40), 6, lpf_bits);
+
+ b43_phy_write(dev, B43_NPHY_C1_INITGAIN, e->init_gain);
+ b43_phy_write(dev, 0x2A7, e->init_gain);
+ b43_ntab_write_bulk(dev, B43_NTAB16(7, 0x106), 2,
+ e->rfseq_init);
+ b43_phy_write(dev, B43_NPHY_C1_INITGAIN, e->init_gain);
+
+ /* TODO: check defines. Do not match variables names */
+ b43_phy_write(dev, B43_NPHY_C1_CLIP1_MEDGAIN, e->cliphi_gain);
+ b43_phy_write(dev, 0x2A9, e->cliphi_gain);
+ b43_phy_write(dev, B43_NPHY_C1_CLIP2_GAIN, e->clipmd_gain);
+ b43_phy_write(dev, 0x2AB, e->clipmd_gain);
+ b43_phy_write(dev, B43_NPHY_C2_CLIP1_HIGAIN, e->cliplo_gain);
+ b43_phy_write(dev, 0x2AD, e->cliplo_gain);
+
+ b43_phy_maskset(dev, 0x27D, 0xFF00, e->crsmin);
+ b43_phy_maskset(dev, 0x280, 0xFF00, e->crsminl);
+ b43_phy_maskset(dev, 0x283, 0xFF00, e->crsminu);
+ b43_phy_write(dev, B43_NPHY_C1_NBCLIPTHRES, e->nbclip);
+ b43_phy_write(dev, B43_NPHY_C2_NBCLIPTHRES, e->nbclip);
+ b43_phy_maskset(dev, B43_NPHY_C1_CLIPWBTHRES,
+ ~B43_NPHY_C1_CLIPWBTHRES_CLIP2, e->wlclip);
+ b43_phy_maskset(dev, B43_NPHY_C2_CLIPWBTHRES,
+ ~B43_NPHY_C2_CLIPWBTHRES_CLIP2, e->wlclip);
+ b43_phy_write(dev, B43_NPHY_CCK_SHIFTB_REF, 0x809C);
+}
+
+static void b43_nphy_gain_ctl_workarounds_rev1_2(struct b43_wldev *dev)
+{
+ struct b43_phy_n *nphy = dev->phy.n;
+
+ u8 i, j;
+ u8 code;
+ u16 tmp;
+ u8 rfseq_events[3] = { 6, 8, 7 };
+ u8 rfseq_delays[3] = { 10, 30, 1 };
+
+ /* Set Clip 2 detect */
+ b43_phy_set(dev, B43_NPHY_C1_CGAINI, B43_NPHY_C1_CGAINI_CL2DETECT);
+ b43_phy_set(dev, B43_NPHY_C2_CGAINI, B43_NPHY_C2_CGAINI_CL2DETECT);
+
+ /* Set narrowband clip threshold */
+ b43_phy_write(dev, B43_NPHY_C1_NBCLIPTHRES, 0x84);
+ b43_phy_write(dev, B43_NPHY_C2_NBCLIPTHRES, 0x84);
+
+ if (!dev->phy.is_40mhz) {
+ /* Set dwell lengths */
+ b43_phy_write(dev, B43_NPHY_CLIP1_NBDWELL_LEN, 0x002B);
+ b43_phy_write(dev, B43_NPHY_CLIP2_NBDWELL_LEN, 0x002B);
+ b43_phy_write(dev, B43_NPHY_W1CLIP1_DWELL_LEN, 0x0009);
+ b43_phy_write(dev, B43_NPHY_W1CLIP2_DWELL_LEN, 0x0009);
+ }
+
+ /* Set wideband clip 2 threshold */
+ b43_phy_maskset(dev, B43_NPHY_C1_CLIPWBTHRES,
+ ~B43_NPHY_C1_CLIPWBTHRES_CLIP2, 21);
+ b43_phy_maskset(dev, B43_NPHY_C2_CLIPWBTHRES,
+ ~B43_NPHY_C2_CLIPWBTHRES_CLIP2, 21);
+
+ if (!dev->phy.is_40mhz) {
+ b43_phy_maskset(dev, B43_NPHY_C1_CGAINI,
+ ~B43_NPHY_C1_CGAINI_GAINBKOFF, 0x1);
+ b43_phy_maskset(dev, B43_NPHY_C2_CGAINI,
+ ~B43_NPHY_C2_CGAINI_GAINBKOFF, 0x1);
+ b43_phy_maskset(dev, B43_NPHY_C1_CCK_CGAINI,
+ ~B43_NPHY_C1_CCK_CGAINI_GAINBKOFF, 0x1);
+ b43_phy_maskset(dev, B43_NPHY_C2_CCK_CGAINI,
+ ~B43_NPHY_C2_CCK_CGAINI_GAINBKOFF, 0x1);
+ }
+
+ b43_phy_write(dev, B43_NPHY_CCK_SHIFTB_REF, 0x809C);
+
+ if (nphy->gain_boost) {
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ &&
+ dev->phy.is_40mhz)
+ code = 4;
+ else
+ code = 5;
+ } else {
+ code = dev->phy.is_40mhz ? 6 : 7;
+ }
+
+ /* Set HPVGA2 index */
+ b43_phy_maskset(dev, B43_NPHY_C1_INITGAIN, ~B43_NPHY_C1_INITGAIN_HPVGA2,
+ code << B43_NPHY_C1_INITGAIN_HPVGA2_SHIFT);
+ b43_phy_maskset(dev, B43_NPHY_C2_INITGAIN, ~B43_NPHY_C2_INITGAIN_HPVGA2,
+ code << B43_NPHY_C2_INITGAIN_HPVGA2_SHIFT);
+
+ b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x1D06);
+ /* specs say about 2 loops, but wl does 4 */
+ for (i = 0; i < 4; i++)
+ b43_phy_write(dev, B43_NPHY_TABLE_DATALO, (code << 8 | 0x7C));
+
+ b43_nphy_adjust_lna_gain_table(dev);
+
+ if (nphy->elna_gain_config) {
+ b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x0808);
+ b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x0);
+ b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1);
+ b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1);
+ b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1);
+
+ b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x0C08);
+ b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x0);
+ b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1);
+ b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1);
+ b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1);
+
+ b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x1D06);
+ /* specs say about 2 loops, but wl does 4 */
+ for (i = 0; i < 4; i++)
+ b43_phy_write(dev, B43_NPHY_TABLE_DATALO,
+ (code << 8 | 0x74));
+ }
+
+ if (dev->phy.rev == 2) {
+ for (i = 0; i < 4; i++) {
+ b43_phy_write(dev, B43_NPHY_TABLE_ADDR,
+ (0x0400 * i) + 0x0020);
+ for (j = 0; j < 21; j++) {
+ tmp = j * (i < 2 ? 3 : 1);
+ b43_phy_write(dev,
+ B43_NPHY_TABLE_DATALO, tmp);
+ }
+ }
+ }
+
+ b43_nphy_set_rf_sequence(dev, 5, rfseq_events, rfseq_delays, 3);
+ b43_phy_maskset(dev, B43_NPHY_OVER_DGAIN1,
+ ~B43_NPHY_OVER_DGAIN_CCKDGECV & 0xFFFF,
+ 0x5A << B43_NPHY_OVER_DGAIN_CCKDGECV_SHIFT);
+
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
+ b43_phy_maskset(dev, B43_PHY_N(0xC5D), 0xFF80, 4);
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/WorkaroundsGainCtrl */
+static void b43_nphy_gain_ctl_workarounds(struct b43_wldev *dev)
+{
+ if (dev->phy.rev >= 3)
+ b43_nphy_gain_ctl_workarounds_rev3plus(dev);
+ else
+ b43_nphy_gain_ctl_workarounds_rev1_2(dev);
+}
+
/**************************************************
* Others
**************************************************/
b43_nphy_stay_in_carrier_search(dev, 0);
}
-/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/AdjustLnaGainTbl */
-static void b43_nphy_adjust_lna_gain_table(struct b43_wldev *dev)
-{
- struct b43_phy_n *nphy = dev->phy.n;
-
- u8 i;
- s16 tmp;
- u16 data[4];
- s16 gain[2];
- u16 minmax[2];
- static const u16 lna_gain[4] = { -2, 10, 19, 25 };
-
- if (nphy->hang_avoid)
- b43_nphy_stay_in_carrier_search(dev, 1);
-
- if (nphy->gain_boost) {
- if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
- gain[0] = 6;
- gain[1] = 6;
- } else {
- tmp = 40370 - 315 * dev->phy.channel;
- gain[0] = ((tmp >> 13) + ((tmp >> 12) & 1));
- tmp = 23242 - 224 * dev->phy.channel;
- gain[1] = ((tmp >> 13) + ((tmp >> 12) & 1));
- }
- } else {
- gain[0] = 0;
- gain[1] = 0;
- }
-
- for (i = 0; i < 2; i++) {
- if (nphy->elna_gain_config) {
- data[0] = 19 + gain[i];
- data[1] = 25 + gain[i];
- data[2] = 25 + gain[i];
- data[3] = 25 + gain[i];
- } else {
- data[0] = lna_gain[0] + gain[i];
- data[1] = lna_gain[1] + gain[i];
- data[2] = lna_gain[2] + gain[i];
- data[3] = lna_gain[3] + gain[i];
- }
- b43_ntab_write_bulk(dev, B43_NTAB16(i, 8), 4, data);
-
- minmax[i] = 23 + gain[i];
- }
-
- b43_phy_maskset(dev, B43_NPHY_C1_MINMAX_GAIN, ~B43_NPHY_C1_MINGAIN,
- minmax[0] << B43_NPHY_C1_MINGAIN_SHIFT);
- b43_phy_maskset(dev, B43_NPHY_C2_MINMAX_GAIN, ~B43_NPHY_C2_MINGAIN,
- minmax[1] << B43_NPHY_C2_MINGAIN_SHIFT);
-
- if (nphy->hang_avoid)
- b43_nphy_stay_in_carrier_search(dev, 0);
-}
-
-/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/WorkaroundsGainCtrl */
-static void b43_nphy_gain_ctrl_workarounds(struct b43_wldev *dev)
-{
- struct b43_phy_n *nphy = dev->phy.n;
- struct ssb_sprom *sprom = dev->dev->bus_sprom;
-
- /* PHY rev 0, 1, 2 */
- u8 i, j;
- u8 code;
- u16 tmp;
- u8 rfseq_events[3] = { 6, 8, 7 };
- u8 rfseq_delays[3] = { 10, 30, 1 };
-
- /* PHY rev >= 3 */
- bool ghz5;
- bool ext_lna;
- u16 rssi_gain;
- struct nphy_gain_ctl_workaround_entry *e;
- u8 lpf_gain[6] = { 0x00, 0x06, 0x0C, 0x12, 0x12, 0x12 };
- u8 lpf_bits[6] = { 0, 1, 2, 3, 3, 3 };
-
- if (dev->phy.rev >= 3) {
- /* Prepare values */
- ghz5 = b43_phy_read(dev, B43_NPHY_BANDCTL)
- & B43_NPHY_BANDCTL_5GHZ;
- ext_lna = sprom->boardflags_lo & B43_BFL_EXTLNA;
- e = b43_nphy_get_gain_ctl_workaround_ent(dev, ghz5, ext_lna);
- if (ghz5 && dev->phy.rev >= 5)
- rssi_gain = 0x90;
- else
- rssi_gain = 0x50;
-
- b43_phy_set(dev, B43_NPHY_RXCTL, 0x0040);
-
- /* Set Clip 2 detect */
- b43_phy_set(dev, B43_NPHY_C1_CGAINI,
- B43_NPHY_C1_CGAINI_CL2DETECT);
- b43_phy_set(dev, B43_NPHY_C2_CGAINI,
- B43_NPHY_C2_CGAINI_CL2DETECT);
-
- b43_radio_write(dev, B2056_RX0 | B2056_RX_BIASPOLE_LNAG1_IDAC,
- 0x17);
- b43_radio_write(dev, B2056_RX1 | B2056_RX_BIASPOLE_LNAG1_IDAC,
- 0x17);
- b43_radio_write(dev, B2056_RX0 | B2056_RX_LNAG2_IDAC, 0xF0);
- b43_radio_write(dev, B2056_RX1 | B2056_RX_LNAG2_IDAC, 0xF0);
- b43_radio_write(dev, B2056_RX0 | B2056_RX_RSSI_POLE, 0x00);
- b43_radio_write(dev, B2056_RX1 | B2056_RX_RSSI_POLE, 0x00);
- b43_radio_write(dev, B2056_RX0 | B2056_RX_RSSI_GAIN,
- rssi_gain);
- b43_radio_write(dev, B2056_RX1 | B2056_RX_RSSI_GAIN,
- rssi_gain);
- b43_radio_write(dev, B2056_RX0 | B2056_RX_BIASPOLE_LNAA1_IDAC,
- 0x17);
- b43_radio_write(dev, B2056_RX1 | B2056_RX_BIASPOLE_LNAA1_IDAC,
- 0x17);
- b43_radio_write(dev, B2056_RX0 | B2056_RX_LNAA2_IDAC, 0xFF);
- b43_radio_write(dev, B2056_RX1 | B2056_RX_LNAA2_IDAC, 0xFF);
-
- b43_ntab_write_bulk(dev, B43_NTAB8(0, 8), 4, e->lna1_gain);
- b43_ntab_write_bulk(dev, B43_NTAB8(1, 8), 4, e->lna1_gain);
- b43_ntab_write_bulk(dev, B43_NTAB8(0, 16), 4, e->lna2_gain);
- b43_ntab_write_bulk(dev, B43_NTAB8(1, 16), 4, e->lna2_gain);
- b43_ntab_write_bulk(dev, B43_NTAB8(0, 32), 10, e->gain_db);
- b43_ntab_write_bulk(dev, B43_NTAB8(1, 32), 10, e->gain_db);
- b43_ntab_write_bulk(dev, B43_NTAB8(2, 32), 10, e->gain_bits);
- b43_ntab_write_bulk(dev, B43_NTAB8(3, 32), 10, e->gain_bits);
- b43_ntab_write_bulk(dev, B43_NTAB8(0, 0x40), 6, lpf_gain);
- b43_ntab_write_bulk(dev, B43_NTAB8(1, 0x40), 6, lpf_gain);
- b43_ntab_write_bulk(dev, B43_NTAB8(2, 0x40), 6, lpf_bits);
- b43_ntab_write_bulk(dev, B43_NTAB8(3, 0x40), 6, lpf_bits);
-
- b43_phy_write(dev, B43_NPHY_C1_INITGAIN, e->init_gain);
- b43_phy_write(dev, 0x2A7, e->init_gain);
- b43_ntab_write_bulk(dev, B43_NTAB16(7, 0x106), 2,
- e->rfseq_init);
- b43_phy_write(dev, B43_NPHY_C1_INITGAIN, e->init_gain);
-
- /* TODO: check defines. Do not match variables names */
- b43_phy_write(dev, B43_NPHY_C1_CLIP1_MEDGAIN, e->cliphi_gain);
- b43_phy_write(dev, 0x2A9, e->cliphi_gain);
- b43_phy_write(dev, B43_NPHY_C1_CLIP2_GAIN, e->clipmd_gain);
- b43_phy_write(dev, 0x2AB, e->clipmd_gain);
- b43_phy_write(dev, B43_NPHY_C2_CLIP1_HIGAIN, e->cliplo_gain);
- b43_phy_write(dev, 0x2AD, e->cliplo_gain);
-
- b43_phy_maskset(dev, 0x27D, 0xFF00, e->crsmin);
- b43_phy_maskset(dev, 0x280, 0xFF00, e->crsminl);
- b43_phy_maskset(dev, 0x283, 0xFF00, e->crsminu);
- b43_phy_write(dev, B43_NPHY_C1_NBCLIPTHRES, e->nbclip);
- b43_phy_write(dev, B43_NPHY_C2_NBCLIPTHRES, e->nbclip);
- b43_phy_maskset(dev, B43_NPHY_C1_CLIPWBTHRES,
- ~B43_NPHY_C1_CLIPWBTHRES_CLIP2, e->wlclip);
- b43_phy_maskset(dev, B43_NPHY_C2_CLIPWBTHRES,
- ~B43_NPHY_C2_CLIPWBTHRES_CLIP2, e->wlclip);
- b43_phy_write(dev, B43_NPHY_CCK_SHIFTB_REF, 0x809C);
- } else {
- /* Set Clip 2 detect */
- b43_phy_set(dev, B43_NPHY_C1_CGAINI,
- B43_NPHY_C1_CGAINI_CL2DETECT);
- b43_phy_set(dev, B43_NPHY_C2_CGAINI,
- B43_NPHY_C2_CGAINI_CL2DETECT);
-
- /* Set narrowband clip threshold */
- b43_phy_write(dev, B43_NPHY_C1_NBCLIPTHRES, 0x84);
- b43_phy_write(dev, B43_NPHY_C2_NBCLIPTHRES, 0x84);
-
- if (!dev->phy.is_40mhz) {
- /* Set dwell lengths */
- b43_phy_write(dev, B43_NPHY_CLIP1_NBDWELL_LEN, 0x002B);
- b43_phy_write(dev, B43_NPHY_CLIP2_NBDWELL_LEN, 0x002B);
- b43_phy_write(dev, B43_NPHY_W1CLIP1_DWELL_LEN, 0x0009);
- b43_phy_write(dev, B43_NPHY_W1CLIP2_DWELL_LEN, 0x0009);
- }
-
- /* Set wideband clip 2 threshold */
- b43_phy_maskset(dev, B43_NPHY_C1_CLIPWBTHRES,
- ~B43_NPHY_C1_CLIPWBTHRES_CLIP2,
- 21);
- b43_phy_maskset(dev, B43_NPHY_C2_CLIPWBTHRES,
- ~B43_NPHY_C2_CLIPWBTHRES_CLIP2,
- 21);
-
- if (!dev->phy.is_40mhz) {
- b43_phy_maskset(dev, B43_NPHY_C1_CGAINI,
- ~B43_NPHY_C1_CGAINI_GAINBKOFF, 0x1);
- b43_phy_maskset(dev, B43_NPHY_C2_CGAINI,
- ~B43_NPHY_C2_CGAINI_GAINBKOFF, 0x1);
- b43_phy_maskset(dev, B43_NPHY_C1_CCK_CGAINI,
- ~B43_NPHY_C1_CCK_CGAINI_GAINBKOFF, 0x1);
- b43_phy_maskset(dev, B43_NPHY_C2_CCK_CGAINI,
- ~B43_NPHY_C2_CCK_CGAINI_GAINBKOFF, 0x1);
- }
-
- b43_phy_write(dev, B43_NPHY_CCK_SHIFTB_REF, 0x809C);
-
- if (nphy->gain_boost) {
- if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ &&
- dev->phy.is_40mhz)
- code = 4;
- else
- code = 5;
- } else {
- code = dev->phy.is_40mhz ? 6 : 7;
- }
-
- /* Set HPVGA2 index */
- b43_phy_maskset(dev, B43_NPHY_C1_INITGAIN,
- ~B43_NPHY_C1_INITGAIN_HPVGA2,
- code << B43_NPHY_C1_INITGAIN_HPVGA2_SHIFT);
- b43_phy_maskset(dev, B43_NPHY_C2_INITGAIN,
- ~B43_NPHY_C2_INITGAIN_HPVGA2,
- code << B43_NPHY_C2_INITGAIN_HPVGA2_SHIFT);
-
- b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x1D06);
- /* specs say about 2 loops, but wl does 4 */
- for (i = 0; i < 4; i++)
- b43_phy_write(dev, B43_NPHY_TABLE_DATALO,
- (code << 8 | 0x7C));
-
- b43_nphy_adjust_lna_gain_table(dev);
-
- if (nphy->elna_gain_config) {
- b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x0808);
- b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x0);
- b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1);
- b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1);
- b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1);
-
- b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x0C08);
- b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x0);
- b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1);
- b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1);
- b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1);
-
- b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x1D06);
- /* specs say about 2 loops, but wl does 4 */
- for (i = 0; i < 4; i++)
- b43_phy_write(dev, B43_NPHY_TABLE_DATALO,
- (code << 8 | 0x74));
- }
-
- if (dev->phy.rev == 2) {
- for (i = 0; i < 4; i++) {
- b43_phy_write(dev, B43_NPHY_TABLE_ADDR,
- (0x0400 * i) + 0x0020);
- for (j = 0; j < 21; j++) {
- tmp = j * (i < 2 ? 3 : 1);
- b43_phy_write(dev,
- B43_NPHY_TABLE_DATALO, tmp);
- }
- }
- }
-
- b43_nphy_set_rf_sequence(dev, 5,
- rfseq_events, rfseq_delays, 3);
- b43_phy_maskset(dev, B43_NPHY_OVER_DGAIN1,
- ~B43_NPHY_OVER_DGAIN_CCKDGECV & 0xFFFF,
- 0x5A << B43_NPHY_OVER_DGAIN_CCKDGECV_SHIFT);
-
- if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
- b43_phy_maskset(dev, B43_PHY_N(0xC5D),
- 0xFF80, 4);
- }
-}
-
static void b43_nphy_workarounds_rev3plus(struct b43_wldev *dev)
{
struct b43_phy_n *nphy = dev->phy.n;
b43_ntab_write(dev, B43_NTAB32(16, 3), 0x18D);
b43_ntab_write(dev, B43_NTAB32(16, 127), 0x18D);
- b43_nphy_gain_ctrl_workarounds(dev);
+ b43_nphy_gain_ctl_workarounds(dev);
b43_ntab_write(dev, B43_NTAB16(8, 0), 2);
b43_ntab_write(dev, B43_NTAB16(8, 16), 2);
b43_nphy_set_rf_sequence(dev, 0, events1, delays1, 7);
b43_nphy_set_rf_sequence(dev, 1, events2, delays2, 7);
- b43_nphy_gain_ctrl_workarounds(dev);
+ b43_nphy_gain_ctl_workarounds(dev);
if (dev->phy.rev < 2) {
if (b43_phy_read(dev, B43_NPHY_RXCTL) & 0x2)
git.openpandora.org / pandora-kernel.git / commitdiff