8390 NETWORK DRIVERS [WD80x3/SMC-ELITE, SMC-ULTRA, NE2000, 3C503, etc.]
L: netdev@vger.kernel.org
S: Orphan / Obsolete
-F: drivers/net/*8390*
-F: drivers/net/ax88796.c
+F: drivers/net/ethernet/8390/
9P FILE SYSTEM
M: Eric Van Hensbergen <ericvh@gmail.com>
S: Supported
F: arch/h8300/
F: drivers/ide/ide-h8300.c
-F: drivers/net/ne-h8300.c
+F: drivers/net/ethernet/8390/ne-h8300.c
UDF FILESYSTEM
M: Jan Kara <jack@suse.cz>
source "drivers/net/arm/Kconfig"
-config AX88796
- tristate "ASIX AX88796 NE2000 clone support"
- depends on ARM || MIPS || SUPERH
- select PHYLIB
- select MDIO_BITBANG
- help
- AX88796 driver, using platform bus to provide
- chip detection and resources
-
-config AX88796_93CX6
- bool "ASIX AX88796 external 93CX6 eeprom support"
- depends on AX88796
- select EEPROM_93CX6
- help
- Select this if your platform comes with an external 93CX6 eeprom.
-
config MACE
tristate "MACE (Power Mac ethernet) support"
depends on PPC_PMAC && PPC32
To compile this driver as a module, choose M here: the module
will be called bmac.
-config HYDRA
- tristate "Hydra support"
- depends on ZORRO
- select CRC32
- help
- If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
-
- To compile this driver as a module, choose M here: the module
- will be called hydra.
-
-config ZORRO8390
- tristate "Zorro NS8390-based Ethernet support"
- depends on ZORRO
- select CRC32
- help
- This driver is for Zorro Ethernet cards using an NS8390-compatible
- chipset, like the Village Tronic Ariadne II and the Individual
- Computers X-Surf Ethernet cards. If you have such a card, say Y.
- Otherwise, say N.
-
- To compile this driver as a module, choose M here: the module
- will be called zorro8390.
-
-config APNE
- tristate "PCMCIA NE2000 support"
- depends on AMIGA_PCMCIA
- select CRC32
- help
- If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
- say N.
-
- To compile this driver as a module, choose M here: the module
- will be called apne.
-
-config MAC8390
- bool "Macintosh NS 8390 based ethernet cards"
- depends on MAC
- select CRC32
- help
- If you want to include a driver to support Nubus or LC-PDS
- Ethernet cards using an NS8390 chipset or its equivalent, say Y
- and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
config MAC89x0
tristate "Macintosh CS89x0 based ethernet cards"
depends on MAC
tristate "SGI O2 MACE Fast Ethernet support"
depends on SGI_IP32=y
-config STNIC
- tristate "National DP83902AV support"
- depends on SUPERH
- select CRC32
- help
- Support for cards based on the National Semiconductor DP83902AV
- ST-NIC Serial Network Interface Controller for Twisted Pair. This
- is a 10Mbit/sec Ethernet controller. Product overview and specs at
- <http://www.national.com/pf/DP/DP83902A.html>.
-
- If unsure, say N.
-
config SH_ETH
tristate "Renesas SuperH Ethernet support"
depends on SUPERH && \
To compile this driver as a module, choose M here. The module
will be called 3c527.
-config NET_VENDOR_SMC
- bool "Western Digital/SMC cards"
- depends on ISA || MCA || EISA || MAC
- help
- If you have a network (Ethernet) card belonging to this class, say Y
- and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- Note that the answer to this question doesn't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about Western Digital cards. If you say Y, you will be
- asked for your specific card in the following questions.
-
-config WD80x3
- tristate "WD80*3 support"
- depends on NET_VENDOR_SMC && ISA
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called wd.
-
-config ULTRAMCA
- tristate "SMC Ultra MCA support"
- depends on NET_VENDOR_SMC && MCA
- select CRC32
- help
- If you have a network (Ethernet) card of this type and are running
- an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called smc-mca.
-
-config ULTRA
- tristate "SMC Ultra support"
- depends on NET_VENDOR_SMC && ISA
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- Important: There have been many reports that, with some motherboards
- mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
- such as some BusLogic models) causes corruption problems with many
- operating systems. The Linux smc-ultra driver has a work-around for
- this but keep it in mind if you have such a SCSI card and have
- problems.
-
- To compile this driver as a module, choose M here. The module
- will be called smc-ultra.
-
-config ULTRA32
- tristate "SMC Ultra32 EISA support"
- depends on NET_VENDOR_SMC && EISA
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called smc-ultra32.
-
config BFIN_MAC
tristate "Blackfin on-chip MAC support"
depends on NET_ETHERNET && (BF516 || BF518 || BF526 || BF527 || BF536 || BF537)
the remaining ISA network card questions. If you say Y, you will be
asked for your specific card in the following questions.
-config E2100
- tristate "Cabletron E21xx support"
- depends on NET_ISA
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called e2100.
-
config EWRK3
tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
depends on NET_ISA
To compile this driver as a module, choose M here. The module
will be called eepro.
-config HPLAN_PLUS
- tristate "HP PCLAN+ (27247B and 27252A) support"
- depends on NET_ISA
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called hp-plus.
-
-config HPLAN
- tristate "HP PCLAN (27245 and other 27xxx series) support"
- depends on NET_ISA
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called hp.
-
config LP486E
tristate "LP486E on board Ethernet"
depends on NET_ISA
To compile this driver as a module, choose M here. The module
will be called eth16i.
-config NE2000
- tristate "NE2000/NE1000 support"
- depends on NET_ISA || (Q40 && m) || M32R || MACH_TX49XX
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>. Many Ethernet cards
- without a specific driver are compatible with NE2000.
-
- If you have a PCI NE2000 card however, say N here and Y to "PCI
- NE2000 and clone support" under "EISA, VLB, PCI and on board
- controllers" below. If you have a NE2000 card and are running on
- an MCA system (a bus system used on some IBM PS/2 computers and
- laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
- below.
-
- To compile this driver as a module, choose M here. The module
- will be called ne.
-
config ZNET
tristate "Zenith Z-Note support (EXPERIMENTAL)"
depends on NET_ISA && EXPERIMENTAL && ISA_DMA_API
To compile this driver as a module, choose M here. The module
will be called seeq8005.
-config NE2_MCA
- tristate "NE/2 (ne2000 MCA version) support"
- depends on MCA_LEGACY
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called ne2.
-
config IBMLANA
tristate "IBM LAN Adapter/A support"
depends on MCA
To compile this driver as a module, choose M here: the module
will be called starfire. This is recommended.
-config AC3200
- tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
- depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called ac3200.
-
config KSZ884X_PCI
tristate "Micrel KSZ8841/2 PCI"
depends on NET_PCI && PCI
To compile this driver as a module, choose M here. The module
will be called e100.
-config LNE390
- tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
- depends on NET_PCI && EISA && EXPERIMENTAL
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called lne390.
-
config FEALNX
tristate "Myson MTD-8xx PCI Ethernet support"
depends on NET_PCI && PCI
More specific information and updates are available from
<http://www.scyld.com/network/natsemi.html>.
-config NE2K_PCI
- tristate "PCI NE2000 and clones support (see help)"
- depends on NET_PCI && PCI
- select CRC32
- ---help---
- This driver is for NE2000 compatible PCI cards. It will not work
- with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
- support" below). If you have a PCI NE2000 network (Ethernet) card,
- say Y and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- This driver also works for the following NE2000 clone cards:
- RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2
- NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
- Holtek HT80232 Holtek HT80229
-
- To compile this driver as a module, choose M here. The module
- will be called ne2k-pci.
-
-config NE3210
- tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
- depends on NET_PCI && EISA && EXPERIMENTAL
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>. Note that this driver
- will NOT WORK for NE3200 cards as they are completely different.
-
- To compile this driver as a module, choose M here. The module
- will be called ne3210.
-
-config ES3210
- tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
- depends on NET_PCI && EISA && EXPERIMENTAL
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called es3210.
-
config 8139CP
tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
depends on NET_PCI && PCI && EXPERIMENTAL
If not sure, enable.
If compiled as module, it will be called fec_mpc52xx_phy.
-config NE_H8300
- tristate "NE2000 compatible support for H8/300"
- depends on H8300
- help
- Say Y here if you want to use the NE2000 compatible
- controller on the Renesas H8/300 processor.
-
config ATL2
tristate "Atheros L2 Fast Ethernet support"
depends on PCI
obj-$(CONFIG_MACE) += mace.o
obj-$(CONFIG_BMAC) += bmac.o
-obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
obj-$(CONFIG_E100) += e100.o
obj-$(CONFIG_TLAN) += tlan.o
obj-$(CONFIG_EPIC100) += epic100.o
obj-$(CONFIG_ISERIES_VETH) += iseries_veth.o
obj-$(CONFIG_NATSEMI) += natsemi.o
obj-$(CONFIG_NS83820) += ns83820.o
-obj-$(CONFIG_STNIC) += stnic.o 8390.o
obj-$(CONFIG_FEALNX) += fealnx.o
obj-$(CONFIG_TIGON3) += tg3.o
obj-$(CONFIG_BNX2) += bnx2.o
obj-$(CONFIG_NET) += Space.o loopback.o
obj-$(CONFIG_SEEQ8005) += seeq8005.o
obj-$(CONFIG_NET_SB1000) += sb1000.o
-obj-$(CONFIG_MAC8390) += mac8390.o
-obj-$(CONFIG_APNE) += apne.o 8390.o
-obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
obj-$(CONFIG_HP100) += hp100.o
obj-$(CONFIG_SMC9194) += smc9194.o
obj-$(CONFIG_FEC) += fec.o
ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y)
obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx_phy.o
endif
-obj-$(CONFIG_WD80x3) += wd.o 8390.o
-obj-$(CONFIG_EL2) += 3c503.o 8390p.o
-obj-$(CONFIG_NE2000) += ne.o 8390p.o
-obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o
-obj-$(CONFIG_HPLAN) += hp.o 8390p.o
-obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o
-obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o
-obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o
-obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o
-obj-$(CONFIG_E2100) += e2100.o 8390.o
-obj-$(CONFIG_ES3210) += es3210.o 8390.o
-obj-$(CONFIG_LNE390) += lne390.o 8390.o
-obj-$(CONFIG_NE3210) += ne3210.o 8390.o
obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
obj-$(CONFIG_B44) += b44.o
obj-$(CONFIG_FORCEDETH) += forcedeth.o
-obj-$(CONFIG_NE_H8300) += ne-h8300.o
-obj-$(CONFIG_AX88796) += ax88796.o
obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
obj-$(CONFIG_FTGMAC100) += ftgmac100.o
obj-$(CONFIG_FTMAC100) += ftmac100.o
obj-$(CONFIG_NI5010) += ni5010.o
obj-$(CONFIG_NI52) += ni52.o
obj-$(CONFIG_ELPLUS) += 3c505.o
-obj-$(CONFIG_AC3200) += ac3200.o 8390.o
obj-$(CONFIG_APRICOT) += 82596.o
obj-$(CONFIG_LASI_82596) += lasi_82596.o
obj-$(CONFIG_SNI_82596) += sni_82596.o
obj-$(CONFIG_LP486E) += lp486e.o
obj-$(CONFIG_ETH16I) += eth16i.o
-obj-$(CONFIG_ZORRO8390) += zorro8390.o
obj-$(CONFIG_EQUALIZER) += eql.o
obj-$(CONFIG_KORINA) += korina.o
obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
-obj-$(CONFIG_HYDRA) += hydra.o
obj-$(CONFIG_CS89x0) += cs89x0.o
obj-$(CONFIG_MACSONIC) += macsonic.o
obj-$(CONFIG_MACMACE) += macmace.o
If you have an Acorn system with one of these network cards, you
should say Y to this option if you wish to use it with Linux.
-config ARM_ETHERH
- tristate "I-cubed EtherH/ANT EtherM support"
- depends on ARM && ARCH_ACORN
- select CRC32
- help
- If you have an Acorn system with one of these network cards, you
- should say Y to this option if you wish to use it with Linux.
-
config ARM_AT91_ETHER
tristate "AT91RM9200 Ethernet support"
depends on ARM && ARCH_AT91RM9200
# Makefile for the ARM network device drivers
#
-obj-$(CONFIG_ARM_ETHERH) += etherh.o
obj-$(CONFIG_ARM_ETHER3) += ether3.o
obj-$(CONFIG_ARM_ETHER1) += ether1.o
obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
--- /dev/null
+#
+# 8390 device configuration
+#
+
+config NET_VENDOR_8390
+ bool "National Semi-conductor 8390 devices"
+ depends on AMIGA_PCMCIA || PCI || SUPERH || ISA || MCA || EISA || \
+ MAC || M32R || MACH_TX49XX || MCA_LEGACY || H8300 || \
+ ARM || MIPS || ZORRO || PCMCIA || EXPERIMENTAL
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Western Digital cards. If you say Y, you will be
+ asked for your specific card in the following questions.
+
+if NET_VENDOR_8390
+
+config EL2
+ tristate "3c503 \"EtherLink II\" support"
+ depends on ISA
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called 3c503.
+
+config AC3200
+ tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
+ depends on PCI && (ISA || EISA) && EXPERIMENTAL
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ac3200.
+
+config PCMCIA_AXNET
+ tristate "Asix AX88190 PCMCIA support"
+ depends on PCMCIA
+ ---help---
+ Say Y here if you intend to attach an Asix AX88190-based PCMCIA
+ (PC-card) Fast Ethernet card to your computer. These cards are
+ nearly NE2000 compatible but need a separate driver due to a few
+ misfeatures.
+
+ To compile this driver as a module, choose M here: the module will be
+ called axnet_cs. If unsure, say N.
+
+config AX88796
+ tristate "ASIX AX88796 NE2000 clone support"
+ depends on (ARM || MIPS || SUPERH)
+ select PHYLIB
+ select MDIO_BITBANG
+ ---help---
+ AX88796 driver, using platform bus to provide
+ chip detection and resources
+
+config AX88796_93CX6
+ bool "ASIX AX88796 external 93CX6 eeprom support"
+ depends on AX88796
+ select EEPROM_93CX6
+ ---help---
+ Select this if your platform comes with an external 93CX6 eeprom.
+
+config E2100
+ tristate "Cabletron E21xx support"
+ depends on ISA
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called e2100.
+
+config ES3210
+ tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
+ depends on PCI && EISA && EXPERIMENTAL
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called es3210.
+
+config HPLAN_PLUS
+ tristate "HP PCLAN+ (27247B and 27252A) support"
+ depends on ISA
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called hp-plus.
+
+config HPLAN
+ tristate "HP PCLAN (27245 and other 27xxx series) support"
+ depends on ISA
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called hp.
+
+config HYDRA
+ tristate "Hydra support"
+ depends on ZORRO
+ select CRC32
+ ---help---
+ If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
+
+ To compile this driver as a module, choose M here: the module
+ will be called hydra.
+
+config ARM_ETHERH
+ tristate "I-cubed EtherH/ANT EtherM support"
+ depends on ARM && ARCH_ACORN
+ select CRC32
+ ---help---
+ If you have an Acorn system with one of these network cards, you
+ should say Y to this option if you wish to use it with Linux.
+
+config LNE390
+ tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
+ depends on PCI && EISA && EXPERIMENTAL
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called lne390.
+
+config MAC8390
+ bool "Macintosh NS 8390 based ethernet cards"
+ depends on MAC
+ select CRC32
+ ---help---
+ If you want to include a driver to support Nubus or LC-PDS
+ Ethernet cards using an NS8390 chipset or its equivalent, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+config NE2000
+ tristate "NE2000/NE1000 support"
+ depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX)
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. Many Ethernet cards
+ without a specific driver are compatible with NE2000.
+
+ If you have a PCI NE2000 card however, say N here and Y to "PCI
+ NE2000 and clone support" under "EISA, VLB, PCI and on board
+ controllers" below. If you have a NE2000 card and are running on
+ an MCA system (a bus system used on some IBM PS/2 computers and
+ laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
+ below.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ne.
+
+config NE2_MCA
+ tristate "NE/2 (ne2000 MCA version) support"
+ depends on MCA_LEGACY
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ne2.
+
+config NE2K_PCI
+ tristate "PCI NE2000 and clones support (see help)"
+ depends on PCI
+ select CRC32
+ ---help---
+ This driver is for NE2000 compatible PCI cards. It will not work
+ with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
+ support" below). If you have a PCI NE2000 network (Ethernet) card,
+ say Y and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ This driver also works for the following NE2000 clone cards:
+ RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2
+ NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
+ Holtek HT80232 Holtek HT80229
+
+ To compile this driver as a module, choose M here. The module
+ will be called ne2k-pci.
+
+config APNE
+ tristate "PCMCIA NE2000 support"
+ depends on AMIGA_PCMCIA
+ select CRC32
+ ---help---
+ If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
+ say N.
+
+ To compile this driver as a module, choose M here: the module
+ will be called apne.
+
+config NE3210
+ tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
+ depends on PCI && EISA && EXPERIMENTAL
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. Note that this driver
+ will NOT WORK for NE3200 cards as they are completely different.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ne3210.
+
+config PCMCIA_PCNET
+ tristate "NE2000 compatible PCMCIA support"
+ depends on PCMCIA
+ select CRC32
+ ---help---
+ Say Y here if you intend to attach an NE2000 compatible PCMCIA
+ (PC-card) Ethernet or Fast Ethernet card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called pcnet_cs. If unsure, say N.
+
+config NE_H8300
+ tristate "NE2000 compatible support for H8/300"
+ depends on H8300
+ ---help---
+ Say Y here if you want to use the NE2000 compatible
+ controller on the Renesas H8/300 processor.
+
+config STNIC
+ tristate "National DP83902AV support"
+ depends on SUPERH
+ select CRC32
+ ---help---
+ Support for cards based on the National Semiconductor DP83902AV
+ ST-NIC Serial Network Interface Controller for Twisted Pair. This
+ is a 10Mbit/sec Ethernet controller. Product overview and specs at
+ <http://www.national.com/pf/DP/DP83902A.html>.
+
+ If unsure, say N.
+
+config NET_VENDOR_SMC
+ bool "Western Digital/SMC cards"
+ depends on (ISA || MCA || EISA || MAC)
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Western Digital cards. If you say Y, you will be
+ asked for your specific card in the following questions.
+
+config ULTRAMCA
+ tristate "SMC Ultra MCA support"
+ depends on NET_VENDOR_SMC && MCA
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type and are running
+ an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called smc-mca.
+
+config ULTRA
+ tristate "SMC Ultra support"
+ depends on NET_VENDOR_SMC && ISA
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Important: There have been many reports that, with some motherboards
+ mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
+ such as some BusLogic models) causes corruption problems with many
+ operating systems. The Linux smc-ultra driver has a work-around for
+ this but keep it in mind if you have such a SCSI card and have
+ problems.
+
+ To compile this driver as a module, choose M here. The module
+ will be called smc-ultra.
+
+config ULTRA32
+ tristate "SMC Ultra32 EISA support"
+ depends on NET_VENDOR_SMC && EISA
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called smc-ultra32.
+
+config WD80x3
+ tristate "WD80*3 support"
+ depends on NET_VENDOR_SMC && ISA
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called wd.
+
+config ZORRO8390
+ tristate "Zorro NS8390-based Ethernet support"
+ depends on ZORRO
+ select CRC32
+ ---help---
+ This driver is for Zorro Ethernet cards using an NS8390-compatible
+ chipset, like the Village Tronic Ariadne II and the Individual
+ Computers X-Surf Ethernet cards. If you have such a card, say Y.
+ Otherwise, say N.
+
+ To compile this driver as a module, choose M here: the module
+ will be called zorro8390.
+
+endif # NET_VENDOR_8390
--- /dev/null
+#
+# Makefile for the 8390 network device drivers.
+#
+
+obj-$(CONFIG_MAC8390) += mac8390.o
+obj-$(CONFIG_AC3200) += ac3200.o 8390.o
+obj-$(CONFIG_APNE) += apne.o 8390.o
+obj-$(CONFIG_ARM_ETHERH) += etherh.o
+obj-$(CONFIG_AX88796) += ax88796.o
+obj-$(CONFIG_E2100) += e2100.o 8390.o
+obj-$(CONFIG_EL2) += 3c503.o 8390p.o
+obj-$(CONFIG_ES3210) += es3210.o 8390.o
+obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o
+obj-$(CONFIG_HPLAN) += hp.o 8390p.o
+obj-$(CONFIG_HYDRA) += hydra.o 8390.o
+obj-$(CONFIG_LNE390) += lne390.o 8390.o
+obj-$(CONFIG_NE2000) += ne.o 8390p.o
+obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o
+obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
+obj-$(CONFIG_NE3210) += ne3210.o 8390.o
+obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o
+obj-$(CONFIG_PCMCIA_AXNET) += axnet_cs.o 8390.o
+obj-$(CONFIG_PCMCIA_PCNET) += pcnet_cs.o 8390.o
+obj-$(CONFIG_STNIC) += stnic.o 8390.o
+obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o
+obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o
+obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o
+obj-$(CONFIG_WD80x3) += wd.o 8390.o
+obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o
#include <linux/etherdevice.h>
#include <linux/crc32.h>
#include <linux/mii.h>
-#include "../8390.h"
+#include "8390.h"
#include <pcmcia/cistpl.h>
#include <pcmcia/ciscode.h>
static char version[] __initdata =
"EtherH/EtherM Driver (c) 2002-2004 Russell King " DRV_VERSION "\n";
-#include "../lib8390.c"
+#include "lib8390.c"
static unsigned int net_debug = NET_DEBUG;
#include <linux/log2.h>
#include <linux/etherdevice.h>
#include <linux/mii.h>
-#include "../8390.h"
+#include "8390.h"
#include <pcmcia/cistpl.h>
#include <pcmcia/ciscode.h>
if ETHERNET
source "drivers/net/ethernet/3com/Kconfig"
+source "drivers/net/ethernet/8390/Kconfig"
source "drivers/net/ethernet/amd/Kconfig"
endif # ETHERNET
#
obj-$(CONFIG_NET_VENDOR_3COM) += 3com/
+obj-$(CONFIG_NET_VENDOR_8390) += 8390/
obj-$(CONFIG_NET_VENDOR_AMD) += amd/
To compile this driver as a module, choose M here: the module will be
called fmvj18x_cs. If unsure, say N.
-config PCMCIA_PCNET
- tristate "NE2000 compatible PCMCIA support"
- select CRC32
- help
- Say Y here if you intend to attach an NE2000 compatible PCMCIA
- (PC-card) Ethernet or Fast Ethernet card to your computer.
-
- To compile this driver as a module, choose M here: the module will be
- called pcnet_cs. If unsure, say N.
-
config PCMCIA_SMC91C92
tristate "SMC 91Cxx PCMCIA support"
select CRC32
To compile this driver as a module, choose M here: the module will be
called xirc2ps_cs. If unsure, say N.
-config PCMCIA_AXNET
- tristate "Asix AX88190 PCMCIA support"
- ---help---
- Say Y here if you intend to attach an Asix AX88190-based PCMCIA
- (PC-card) Fast Ethernet card to your computer. These cards are
- nearly NE2000 compatible but need a separate driver due to a few
- misfeatures.
-
- To compile this driver as a module, choose M here: the module will be
- called axnet_cs. If unsure, say N.
-
config ARCNET_COM20020_CS
tristate "COM20020 ARCnet PCMCIA support"
depends on ARCNET_COM20020
# 16-bit client drivers
obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o
-obj-$(CONFIG_PCMCIA_PCNET) += pcnet_cs.o
obj-$(CONFIG_PCMCIA_SMC91C92) += smc91c92_cs.o
obj-$(CONFIG_PCMCIA_XIRC2PS) += xirc2ps_cs.o
obj-$(CONFIG_ARCNET_COM20020_CS)+= com20020_cs.o
-obj-$(CONFIG_PCMCIA_AXNET) += axnet_cs.o
obj-$(CONFIG_PCMCIA_IBMTR) += ibmtr_cs.o
git.openpandora.org / pandora-kernel.git / commitdiff