-#ifdef __uClinux__
-#include "entry_no.h"
+#ifndef __M68K_ENTRY_H
+#define __M68K_ENTRY_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#ifdef __ASSEMBLY__
+#include <asm/thread_info.h>
+#endif
+
+/*
+ * Stack layout in 'ret_from_exception':
+ *
+ * This allows access to the syscall arguments in registers d1-d5
+ *
+ * 0(sp) - d1
+ * 4(sp) - d2
+ * 8(sp) - d3
+ * C(sp) - d4
+ * 10(sp) - d5
+ * 14(sp) - a0
+ * 18(sp) - a1
+ * 1C(sp) - a2
+ * 20(sp) - d0
+ * 24(sp) - orig_d0
+ * 28(sp) - stack adjustment
+ * 2C(sp) - [ sr ] [ format & vector ]
+ * 2E(sp) - [ pc-hiword ] [ sr ]
+ * 30(sp) - [ pc-loword ] [ pc-hiword ]
+ * 32(sp) - [ format & vector ] [ pc-loword ]
+ * ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^
+ * M68K COLDFIRE
+ */
+
+/* the following macro is used when enabling interrupts */
+#if defined(MACH_ATARI_ONLY)
+ /* block out HSYNC on the atari */
+#define ALLOWINT (~0x400)
+#define MAX_NOINT_IPL 3
#else
-#include "entry_mm.h"
+ /* portable version */
+#define ALLOWINT (~0x700)
+#define MAX_NOINT_IPL 0
+#endif /* machine compilation types */
+
+#ifdef __ASSEMBLY__
+/*
+ * This defines the normal kernel pt-regs layout.
+ *
+ * regs a3-a6 and d6-d7 are preserved by C code
+ * the kernel doesn't mess with usp unless it needs to
+ */
+#define SWITCH_STACK_SIZE (6*4+4) /* includes return address */
+
+#ifdef CONFIG_COLDFIRE
+#ifdef CONFIG_COLDFIRE_SW_A7
+/*
+ * This is made a little more tricky on older ColdFires. There is no
+ * separate supervisor and user stack pointers. Need to artificially
+ * construct a usp in software... When doing this we need to disable
+ * interrupts, otherwise bad things will happen.
+ */
+.globl sw_usp
+.globl sw_ksp
+
+.macro SAVE_ALL_SYS
+ move #0x2700,%sr /* disable intrs */
+ btst #5,%sp@(2) /* from user? */
+ bnes 6f /* no, skip */
+ movel %sp,sw_usp /* save user sp */
+ addql #8,sw_usp /* remove exception */
+ movel sw_ksp,%sp /* kernel sp */
+ subql #8,%sp /* room for exception */
+ clrl %sp@- /* stkadj */
+ movel %d0,%sp@- /* orig d0 */
+ movel %d0,%sp@- /* d0 */
+ lea %sp@(-32),%sp /* space for 8 regs */
+ moveml %d1-%d5/%a0-%a2,%sp@
+ movel sw_usp,%a0 /* get usp */
+ movel %a0@-,%sp@(PT_OFF_PC) /* copy exception program counter */
+ movel %a0@-,%sp@(PT_OFF_FORMATVEC)/*copy exception format/vector/sr */
+ bra 7f
+ 6:
+ clrl %sp@- /* stkadj */
+ movel %d0,%sp@- /* orig d0 */
+ movel %d0,%sp@- /* d0 */
+ lea %sp@(-32),%sp /* space for 8 regs */
+ moveml %d1-%d5/%a0-%a2,%sp@
+ 7:
+.endm
+
+.macro SAVE_ALL_INT
+ SAVE_ALL_SYS
+ moveq #-1,%d0 /* not system call entry */
+ movel %d0,%sp@(PT_OFF_ORIG_D0)
+.endm
+
+.macro RESTORE_USER
+ move #0x2700,%sr /* disable intrs */
+ movel sw_usp,%a0 /* get usp */
+ movel %sp@(PT_OFF_PC),%a0@- /* copy exception program counter */
+ movel %sp@(PT_OFF_FORMATVEC),%a0@-/*copy exception format/vector/sr */
+ moveml %sp@,%d1-%d5/%a0-%a2
+ lea %sp@(32),%sp /* space for 8 regs */
+ movel %sp@+,%d0
+ addql #4,%sp /* orig d0 */
+ addl %sp@+,%sp /* stkadj */
+ addql #8,%sp /* remove exception */
+ movel %sp,sw_ksp /* save ksp */
+ subql #8,sw_usp /* set exception */
+ movel sw_usp,%sp /* restore usp */
+ rte
+.endm
+
+.macro RDUSP
+ movel sw_usp,%a3
+.endm
+
+.macro WRUSP
+ movel %a3,sw_usp
+.endm
+
+#else /* !CONFIG_COLDFIRE_SW_A7 */
+/*
+ * Modern ColdFire parts have separate supervisor and user stack
+ * pointers. Simple load and restore macros for this case.
+ */
+.macro SAVE_ALL_SYS
+ move #0x2700,%sr /* disable intrs */
+ clrl %sp@- /* stkadj */
+ movel %d0,%sp@- /* orig d0 */
+ movel %d0,%sp@- /* d0 */
+ lea %sp@(-32),%sp /* space for 8 regs */
+ moveml %d1-%d5/%a0-%a2,%sp@
+.endm
+
+.macro SAVE_ALL_INT
+ move #0x2700,%sr /* disable intrs */
+ clrl %sp@- /* stkadj */
+ pea -1:w /* orig d0 */
+ movel %d0,%sp@- /* d0 */
+ lea %sp@(-32),%sp /* space for 8 regs */
+ moveml %d1-%d5/%a0-%a2,%sp@
+.endm
+
+.macro RESTORE_USER
+ moveml %sp@,%d1-%d5/%a0-%a2
+ lea %sp@(32),%sp /* space for 8 regs */
+ movel %sp@+,%d0
+ addql #4,%sp /* orig d0 */
+ addl %sp@+,%sp /* stkadj */
+ rte
+.endm
+
+.macro RDUSP
+ /*move %usp,%a3*/
+ .word 0x4e6b
+.endm
+
+.macro WRUSP
+ /*move %a3,%usp*/
+ .word 0x4e63
+.endm
+
+#endif /* !CONFIG_COLDFIRE_SW_A7 */
+
+.macro SAVE_SWITCH_STACK
+ lea %sp@(-24),%sp /* 6 regs */
+ moveml %a3-%a6/%d6-%d7,%sp@
+.endm
+
+.macro RESTORE_SWITCH_STACK
+ moveml %sp@,%a3-%a6/%d6-%d7
+ lea %sp@(24),%sp /* 6 regs */
+.endm
+
+#else /* !CONFIG_COLDFIRE */
+
+/*
+ * All other types of m68k parts (68000, 680x0, CPU32) have the same
+ * entry and exit code.
+ */
+
+/*
+ * a -1 in the orig_d0 field signifies
+ * that the stack frame is NOT for syscall
+ */
+.macro SAVE_ALL_INT
+ clrl %sp@- /* stk_adj */
+ pea -1:w /* orig d0 */
+ movel %d0,%sp@- /* d0 */
+ moveml %d1-%d5/%a0-%a2,%sp@-
+.endm
+
+.macro SAVE_ALL_SYS
+ clrl %sp@- /* stk_adj */
+ movel %d0,%sp@- /* orig d0 */
+ movel %d0,%sp@- /* d0 */
+ moveml %d1-%d5/%a0-%a2,%sp@-
+.endm
+
+.macro RESTORE_ALL
+ moveml %sp@+,%a0-%a2/%d1-%d5
+ movel %sp@+,%d0
+ addql #4,%sp /* orig d0 */
+ addl %sp@+,%sp /* stk adj */
+ rte
+.endm
+
+
+.macro SAVE_SWITCH_STACK
+ moveml %a3-%a6/%d6-%d7,%sp@-
+.endm
+
+.macro RESTORE_SWITCH_STACK
+ moveml %sp@+,%a3-%a6/%d6-%d7
+.endm
+
+#endif /* !CONFIG_COLDFIRE */
+
+/*
+ * Register %a2 is reserved and set to current task on MMU enabled systems.
+ * Non-MMU systems do not reserve %a2 in this way, and this definition is
+ * not used for them.
+ */
+#define curptr a2
+
+#define GET_CURRENT(tmp) get_current tmp
+.macro get_current reg=%d0
+ movel %sp,\reg
+ andw #-THREAD_SIZE,\reg
+ movel \reg,%curptr
+ movel %curptr@,%curptr
+.endm
+
+#else /* C source */
+
+#define STR(X) STR1(X)
+#define STR1(X) #X
+
+#define SAVE_ALL_INT \
+ "clrl %%sp@-;" /* stk_adj */ \
+ "pea -1:w;" /* orig d0 = -1 */ \
+ "movel %%d0,%%sp@-;" /* d0 */ \
+ "moveml %%d1-%%d5/%%a0-%%a2,%%sp@-"
+
+#define GET_CURRENT(tmp) \
+ "movel %%sp,"#tmp"\n\t" \
+ "andw #-"STR(THREAD_SIZE)","#tmp"\n\t" \
+ "movel "#tmp",%%a2\n\t" \
+ "movel %%a2@,%%a2"
+
#endif
+
+#endif /* __M68K_ENTRY_H */
+++ /dev/null
-#ifndef __M68K_ENTRY_H
-#define __M68K_ENTRY_H
-
-#include <asm/setup.h>
-#include <asm/page.h>
-#ifdef __ASSEMBLY__
-#include <asm/thread_info.h>
-#endif
-
-/*
- * Stack layout in 'ret_from_exception':
- *
- * This allows access to the syscall arguments in registers d1-d5
- *
- * 0(sp) - d1
- * 4(sp) - d2
- * 8(sp) - d3
- * C(sp) - d4
- * 10(sp) - d5
- * 14(sp) - a0
- * 18(sp) - a1
- * 1C(sp) - a2
- * 20(sp) - d0
- * 24(sp) - orig_d0
- * 28(sp) - stack adjustment
- * 2C(sp) - sr
- * 2E(sp) - pc
- * 32(sp) - format & vector
- */
-
-/*
- * 97/05/14 Andreas: Register %a2 is now set to the current task throughout
- * the whole kernel.
- */
-
-/* the following macro is used when enabling interrupts */
-#if defined(MACH_ATARI_ONLY)
- /* block out HSYNC on the atari */
-#define ALLOWINT (~0x400)
-#define MAX_NOINT_IPL 3
-#else
- /* portable version */
-#define ALLOWINT (~0x700)
-#define MAX_NOINT_IPL 0
-#endif /* machine compilation types */
-
-#ifdef __ASSEMBLY__
-
-#define curptr a2
-
-LFLUSH_I_AND_D = 0x00000808
-
-#define SAVE_ALL_INT save_all_int
-#define SAVE_ALL_SYS save_all_sys
-#define RESTORE_ALL restore_all
-/*
- * This defines the normal kernel pt-regs layout.
- *
- * regs a3-a6 and d6-d7 are preserved by C code
- * the kernel doesn't mess with usp unless it needs to
- */
-
-/*
- * a -1 in the orig_d0 field signifies
- * that the stack frame is NOT for syscall
- */
-.macro save_all_int
- clrl %sp@- | stk_adj
- pea -1:w | orig d0
- movel %d0,%sp@- | d0
- moveml %d1-%d5/%a0-%a1/%curptr,%sp@-
-.endm
-
-.macro save_all_sys
- clrl %sp@- | stk_adj
- movel %d0,%sp@- | orig d0
- movel %d0,%sp@- | d0
- moveml %d1-%d5/%a0-%a1/%curptr,%sp@-
-.endm
-
-.macro restore_all
- moveml %sp@+,%a0-%a1/%curptr/%d1-%d5
- movel %sp@+,%d0
- addql #4,%sp | orig d0
- addl %sp@+,%sp | stk adj
- rte
-.endm
-
-#define SWITCH_STACK_SIZE (6*4+4) /* includes return address */
-
-#define SAVE_SWITCH_STACK save_switch_stack
-#define RESTORE_SWITCH_STACK restore_switch_stack
-#define GET_CURRENT(tmp) get_current tmp
-
-.macro save_switch_stack
- moveml %a3-%a6/%d6-%d7,%sp@-
-.endm
-
-.macro restore_switch_stack
- moveml %sp@+,%a3-%a6/%d6-%d7
-.endm
-
-.macro get_current reg=%d0
- movel %sp,\reg
- andw #-THREAD_SIZE,\reg
- movel \reg,%curptr
- movel %curptr@,%curptr
-.endm
-
-#else /* C source */
-
-#define STR(X) STR1(X)
-#define STR1(X) #X
-
-#define SAVE_ALL_INT \
- "clrl %%sp@-;" /* stk_adj */ \
- "pea -1:w;" /* orig d0 = -1 */ \
- "movel %%d0,%%sp@-;" /* d0 */ \
- "moveml %%d1-%%d5/%%a0-%%a2,%%sp@-"
-#define GET_CURRENT(tmp) \
- "movel %%sp,"#tmp"\n\t" \
- "andw #-"STR(THREAD_SIZE)","#tmp"\n\t" \
- "movel "#tmp",%%a2\n\t" \
- "movel %%a2@,%%a2"
-
-#endif
-
-#endif /* __M68K_ENTRY_H */
+++ /dev/null
-#ifndef __M68KNOMMU_ENTRY_H
-#define __M68KNOMMU_ENTRY_H
-
-#include <asm/setup.h>
-#include <asm/page.h>
-
-/*
- * Stack layout in 'ret_from_exception':
- *
- * This allows access to the syscall arguments in registers d1-d5
- *
- * 0(sp) - d1
- * 4(sp) - d2
- * 8(sp) - d3
- * C(sp) - d4
- * 10(sp) - d5
- * 14(sp) - a0
- * 18(sp) - a1
- * 1C(sp) - a2
- * 20(sp) - d0
- * 24(sp) - orig_d0
- * 28(sp) - stack adjustment
- * 2C(sp) - [ sr ] [ format & vector ]
- * 2E(sp) - [ pc-hiword ] [ sr ]
- * 30(sp) - [ pc-loword ] [ pc-hiword ]
- * 32(sp) - [ format & vector ] [ pc-loword ]
- * ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^
- * M68K COLDFIRE
- */
-
-#define ALLOWINT (~0x700)
-
-#ifdef __ASSEMBLY__
-
-#define SWITCH_STACK_SIZE (6*4+4) /* Includes return address */
-
-/*
- * This defines the normal kernel pt-regs layout.
- *
- * regs are a2-a6 and d6-d7 preserved by C code
- * the kernel doesn't mess with usp unless it needs to
- */
-
-#ifdef CONFIG_COLDFIRE
-#ifdef CONFIG_COLDFIRE_SW_A7
-/*
- * This is made a little more tricky on older ColdFires. There is no
- * separate supervisor and user stack pointers. Need to artificially
- * construct a usp in software... When doing this we need to disable
- * interrupts, otherwise bad things will happen.
- */
-.globl sw_usp
-.globl sw_ksp
-
-.macro SAVE_ALL
- move #0x2700,%sr /* disable intrs */
- btst #5,%sp@(2) /* from user? */
- bnes 6f /* no, skip */
- movel %sp,sw_usp /* save user sp */
- addql #8,sw_usp /* remove exception */
- movel sw_ksp,%sp /* kernel sp */
- subql #8,%sp /* room for exception */
- clrl %sp@- /* stkadj */
- movel %d0,%sp@- /* orig d0 */
- movel %d0,%sp@- /* d0 */
- lea %sp@(-32),%sp /* space for 8 regs */
- moveml %d1-%d5/%a0-%a2,%sp@
- movel sw_usp,%a0 /* get usp */
- movel %a0@-,%sp@(PT_OFF_PC) /* copy exception program counter */
- movel %a0@-,%sp@(PT_OFF_FORMATVEC)/*copy exception format/vector/sr */
- bra 7f
- 6:
- clrl %sp@- /* stkadj */
- movel %d0,%sp@- /* orig d0 */
- movel %d0,%sp@- /* d0 */
- lea %sp@(-32),%sp /* space for 8 regs */
- moveml %d1-%d5/%a0-%a2,%sp@
- 7:
-.endm
-
-.macro RESTORE_USER
- move #0x2700,%sr /* disable intrs */
- movel sw_usp,%a0 /* get usp */
- movel %sp@(PT_OFF_PC),%a0@- /* copy exception program counter */
- movel %sp@(PT_OFF_FORMATVEC),%a0@-/*copy exception format/vector/sr */
- moveml %sp@,%d1-%d5/%a0-%a2
- lea %sp@(32),%sp /* space for 8 regs */
- movel %sp@+,%d0
- addql #4,%sp /* orig d0 */
- addl %sp@+,%sp /* stkadj */
- addql #8,%sp /* remove exception */
- movel %sp,sw_ksp /* save ksp */
- subql #8,sw_usp /* set exception */
- movel sw_usp,%sp /* restore usp */
- rte
-.endm
-
-.macro RDUSP
- movel sw_usp,%a3
-.endm
-
-.macro WRUSP
- movel %a3,sw_usp
-.endm
-
-#else /* !CONFIG_COLDFIRE_SW_A7 */
-/*
- * Modern ColdFire parts have separate supervisor and user stack
- * pointers. Simple load and restore macros for this case.
- */
-.macro SAVE_ALL
- move #0x2700,%sr /* disable intrs */
- clrl %sp@- /* stkadj */
- movel %d0,%sp@- /* orig d0 */
- movel %d0,%sp@- /* d0 */
- lea %sp@(-32),%sp /* space for 8 regs */
- moveml %d1-%d5/%a0-%a2,%sp@
-.endm
-
-.macro RESTORE_USER
- moveml %sp@,%d1-%d5/%a0-%a2
- lea %sp@(32),%sp /* space for 8 regs */
- movel %sp@+,%d0
- addql #4,%sp /* orig d0 */
- addl %sp@+,%sp /* stkadj */
- rte
-.endm
-
-.macro RDUSP
- /*move %usp,%a3*/
- .word 0x4e6b
-.endm
-
-.macro WRUSP
- /*move %a3,%usp*/
- .word 0x4e63
-.endm
-
-#endif /* !CONFIG_COLDFIRE_SW_A7 */
-
-.macro SAVE_SWITCH_STACK
- lea %sp@(-24),%sp /* 6 regs */
- moveml %a3-%a6/%d6-%d7,%sp@
-.endm
-
-.macro RESTORE_SWITCH_STACK
- moveml %sp@,%a3-%a6/%d6-%d7
- lea %sp@(24),%sp /* 6 regs */
-.endm
-
-#else /* !CONFIG_COLDFIRE */
-
-/*
- * Standard 68k interrupt entry and exit macros.
- */
-.macro SAVE_ALL
- clrl %sp@- /* stkadj */
- movel %d0,%sp@- /* orig d0 */
- movel %d0,%sp@- /* d0 */
- moveml %d1-%d5/%a0-%a2,%sp@-
-.endm
-
-.macro RESTORE_ALL
- moveml %sp@+,%a0-%a2/%d1-%d5
- movel %sp@+,%d0
- addql #4,%sp /* orig d0 */
- addl %sp@+,%sp /* stkadj */
- rte
-.endm
-
-.macro SAVE_SWITCH_STACK
- moveml %a3-%a6/%d6-%d7,%sp@-
-.endm
-
-.macro RESTORE_SWITCH_STACK
- moveml %sp@+,%a3-%a6/%d6-%d7
-.endm
-
-#endif /* !COLDFIRE_SW_A7 */
-#endif /* __ASSEMBLY__ */
-#endif /* __M68KNOMMU_ENTRY_H */
.globl sys_vfork
ENTRY(buserr)
- SAVE_ALL
+ SAVE_ALL_INT
moveq #-1,%d0
movel %d0,%sp@(PT_OFF_ORIG_D0)
movel %sp,%sp@- /* stack frame pointer argument */
jra ret_from_exception
ENTRY(trap)
- SAVE_ALL
+ SAVE_ALL_INT
moveq #-1,%d0
movel %d0,%sp@(PT_OFF_ORIG_D0)
movel %sp,%sp@- /* stack frame pointer argument */
.globl dbginterrupt
ENTRY(dbginterrupt)
- SAVE_ALL
+ SAVE_ALL_INT
moveq #-1,%d0
movel %d0,%sp@(PT_OFF_ORIG_D0)
movel %sp,%sp@- /* stack frame pointer argument */
jra ret_from_exception
ENTRY(system_call)
- SAVE_ALL
+ SAVE_ALL_SYS
/* save top of frame*/
pea %sp@
* This is the main interrupt handler, responsible for calling process_int()
*/
inthandler1:
- SAVE_ALL
+ SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
bra ret_from_interrupt
inthandler2:
- SAVE_ALL
+ SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
bra ret_from_interrupt
inthandler3:
- SAVE_ALL
+ SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
bra ret_from_interrupt
inthandler4:
- SAVE_ALL
+ SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
bra ret_from_interrupt
inthandler5:
- SAVE_ALL
+ SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
bra ret_from_interrupt
inthandler6:
- SAVE_ALL
+ SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
bra ret_from_interrupt
inthandler7:
- SAVE_ALL
+ SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
bra ret_from_interrupt
inthandler:
- SAVE_ALL
+ SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
jra ret_from_exception
ENTRY(system_call)
- SAVE_ALL
+ SAVE_ALL_SYS
/* save top of frame*/
pea %sp@
* This is the main interrupt handler, responsible for calling do_IRQ()
*/
inthandler:
- SAVE_ALL
+ SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and.l #0x3ff, %d0
lsr.l #0x02, %d0
bra 1f
ENTRY(system_call)
- SAVE_ALL
+ SAVE_ALL_SYS
move #0x2000,%sr /* enable intrs again */
cmpl #NR_syscalls,%d0
* sources). Calls up to high level code to do all the work.
*/
ENTRY(inthandler)
- SAVE_ALL
- moveq #-1,%d0
- movel %d0,%sp@(PT_OFF_ORIG_D0)
+ SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC),%d0 /* put exception # in d0 */
andl #0x03fc,%d0 /* mask out vector only */
git.openpandora.org / pandora-kernel.git / commitdiff