/* PCI230 daccon bipolar flag for each analogue output range. */
static const unsigned char pci230_ao_bipolar[2] = { 0, 1 };
-static void pci230_ai_stop(struct comedi_device *dev,
- struct comedi_subdevice *s);
-static void pci230_handle_ai(struct comedi_device *dev,
- struct comedi_subdevice *s);
-
static short pci230_ai_read(struct comedi_device *dev)
{
const struct pci230_board *thisboard = comedi_board(dev);
return 1;
}
+static void pci230_ai_stop(struct comedi_device *dev,
+ struct comedi_subdevice *s)
+{
+ struct pci230_private *devpriv = dev->private;
+ unsigned long irqflags;
+ struct comedi_cmd *cmd;
+ int started;
+
+ spin_lock_irqsave(&devpriv->ai_stop_spinlock, irqflags);
+ started = test_and_clear_bit(AI_CMD_STARTED, &devpriv->state);
+ spin_unlock_irqrestore(&devpriv->ai_stop_spinlock, irqflags);
+ if (!started)
+ return;
+ cmd = &s->async->cmd;
+ if (cmd->convert_src == TRIG_TIMER) {
+ /* Stop conversion rate generator. */
+ pci230_cancel_ct(dev, 2);
+ }
+ if (cmd->scan_begin_src != TRIG_FOLLOW) {
+ /* Stop scan period monostable. */
+ pci230_cancel_ct(dev, 0);
+ }
+ spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
+ /* Disable ADC interrupt and wait for interrupt routine to finish
+ * running unless we are called from the interrupt routine. */
+ devpriv->int_en &= ~PCI230_INT_ADC;
+ while (devpriv->intr_running && devpriv->intr_cpuid != THISCPU) {
+ spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
+ spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
+ }
+ if (devpriv->ier != devpriv->int_en) {
+ devpriv->ier = devpriv->int_en;
+ outb(devpriv->ier, devpriv->iobase1 + PCI230_INT_SCE);
+ }
+ spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
+ /* Reset FIFO, disable FIFO and set start conversion source to none.
+ * Keep se/diff and bip/uni settings */
+ devpriv->adccon = (devpriv->adccon & (PCI230_ADC_IR_MASK
+ | PCI230_ADC_IM_MASK)) |
+ PCI230_ADC_TRIG_NONE;
+ outw(devpriv->adccon | PCI230_ADC_FIFO_RESET,
+ dev->iobase + PCI230_ADCCON);
+ /* Release resources. */
+ put_all_resources(dev, OWNER_AICMD);
+}
+
static void pci230_ai_start(struct comedi_device *dev,
struct comedi_subdevice *s)
{
return 1;
}
+static void pci230_handle_ai(struct comedi_device *dev,
+ struct comedi_subdevice *s)
+{
+ struct pci230_private *devpriv = dev->private;
+ unsigned int events = 0;
+ unsigned int status_fifo;
+ unsigned int i;
+ unsigned int todo;
+ unsigned int fifoamount;
+ struct comedi_async *async = s->async;
+ unsigned int scanlen = async->cmd.scan_end_arg;
+
+ /* Determine number of samples to read. */
+ if (devpriv->ai_continuous) {
+ todo = PCI230_ADC_FIFOLEVEL_HALFFULL;
+ } else if (devpriv->ai_scan_count == 0) {
+ todo = 0;
+ } else if ((devpriv->ai_scan_count > PCI230_ADC_FIFOLEVEL_HALFFULL)
+ || (scanlen > PCI230_ADC_FIFOLEVEL_HALFFULL)) {
+ todo = PCI230_ADC_FIFOLEVEL_HALFFULL;
+ } else {
+ todo = (devpriv->ai_scan_count * scanlen)
+ - devpriv->ai_scan_pos;
+ if (todo > PCI230_ADC_FIFOLEVEL_HALFFULL)
+ todo = PCI230_ADC_FIFOLEVEL_HALFFULL;
+ }
+ if (todo == 0)
+ return;
+ fifoamount = 0;
+ for (i = 0; i < todo; i++) {
+ if (fifoamount == 0) {
+ /* Read FIFO state. */
+ status_fifo = inw(dev->iobase + PCI230_ADCCON);
+ if ((status_fifo & PCI230_ADC_FIFO_FULL_LATCHED) != 0) {
+ /* Report error otherwise FIFO overruns will go
+ * unnoticed by the caller. */
+ comedi_error(dev, "AI FIFO overrun");
+ events |= COMEDI_CB_OVERFLOW | COMEDI_CB_ERROR;
+ break;
+ } else if ((status_fifo & PCI230_ADC_FIFO_EMPTY) != 0) {
+ /* FIFO empty. */
+ break;
+ } else if ((status_fifo & PCI230_ADC_FIFO_HALF) != 0) {
+ /* FIFO half full. */
+ fifoamount = PCI230_ADC_FIFOLEVEL_HALFFULL;
+ } else {
+ /* FIFO not empty. */
+ if (devpriv->hwver > 0) {
+ /* Read PCI230+/260+ ADC FIFO level. */
+ fifoamount = inw(dev->iobase
+ + PCI230P_ADCFFLEV);
+ if (fifoamount == 0) {
+ /* Shouldn't happen. */
+ break;
+ }
+ } else {
+ fifoamount = 1;
+ }
+ }
+ }
+ /* Read sample and store in Comedi's circular buffer. */
+ if (comedi_buf_put(async, pci230_ai_read(dev)) == 0) {
+ events |= COMEDI_CB_ERROR | COMEDI_CB_OVERFLOW;
+ comedi_error(dev, "AI buffer overflow");
+ break;
+ }
+ fifoamount--;
+ devpriv->ai_scan_pos++;
+ if (devpriv->ai_scan_pos == scanlen) {
+ /* End of scan. */
+ devpriv->ai_scan_pos = 0;
+ devpriv->ai_scan_count--;
+ async->events |= COMEDI_CB_EOS;
+ }
+ }
+ if (!devpriv->ai_continuous && (devpriv->ai_scan_count == 0)) {
+ /* End of acquisition. */
+ events |= COMEDI_CB_EOA;
+ } else {
+ /* More samples required, tell Comedi to block. */
+ events |= COMEDI_CB_BLOCK;
+ }
+ async->events |= events;
+ if ((async->events & (COMEDI_CB_EOA | COMEDI_CB_ERROR |
+ COMEDI_CB_OVERFLOW)) != 0) {
+ /* disable hardware conversions */
+ pci230_ai_stop(dev, s);
+ } else {
+ /* update FIFO interrupt trigger level */
+ pci230_ai_update_fifo_trigger_level(dev, s);
+ }
+}
+
static int pci230_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
struct pci230_private *devpriv = dev->private;
return 0;
}
+static int pci230_ai_cancel(struct comedi_device *dev,
+ struct comedi_subdevice *s)
+{
+ pci230_ai_stop(dev, s);
+ return 0;
+}
+
/* Interrupt handler */
static irqreturn_t pci230_interrupt(int irq, void *d)
{
return IRQ_HANDLED;
}
-static void pci230_handle_ai(struct comedi_device *dev,
- struct comedi_subdevice *s)
-{
- struct pci230_private *devpriv = dev->private;
- unsigned int events = 0;
- unsigned int status_fifo;
- unsigned int i;
- unsigned int todo;
- unsigned int fifoamount;
- struct comedi_async *async = s->async;
- unsigned int scanlen = async->cmd.scan_end_arg;
-
- /* Determine number of samples to read. */
- if (devpriv->ai_continuous) {
- todo = PCI230_ADC_FIFOLEVEL_HALFFULL;
- } else if (devpriv->ai_scan_count == 0) {
- todo = 0;
- } else if ((devpriv->ai_scan_count > PCI230_ADC_FIFOLEVEL_HALFFULL)
- || (scanlen > PCI230_ADC_FIFOLEVEL_HALFFULL)) {
- todo = PCI230_ADC_FIFOLEVEL_HALFFULL;
- } else {
- todo = (devpriv->ai_scan_count * scanlen)
- - devpriv->ai_scan_pos;
- if (todo > PCI230_ADC_FIFOLEVEL_HALFFULL)
- todo = PCI230_ADC_FIFOLEVEL_HALFFULL;
-
- }
-
- if (todo == 0)
- return;
-
-
- fifoamount = 0;
- for (i = 0; i < todo; i++) {
- if (fifoamount == 0) {
- /* Read FIFO state. */
- status_fifo = inw(dev->iobase + PCI230_ADCCON);
-
- if ((status_fifo & PCI230_ADC_FIFO_FULL_LATCHED) != 0) {
- /* Report error otherwise FIFO overruns will go
- * unnoticed by the caller. */
- comedi_error(dev, "AI FIFO overrun");
- events |= COMEDI_CB_OVERFLOW | COMEDI_CB_ERROR;
- break;
- } else if ((status_fifo & PCI230_ADC_FIFO_EMPTY) != 0) {
- /* FIFO empty. */
- break;
- } else if ((status_fifo & PCI230_ADC_FIFO_HALF) != 0) {
- /* FIFO half full. */
- fifoamount = PCI230_ADC_FIFOLEVEL_HALFFULL;
- } else {
- /* FIFO not empty. */
- if (devpriv->hwver > 0) {
- /* Read PCI230+/260+ ADC FIFO level. */
- fifoamount = inw(dev->iobase
- + PCI230P_ADCFFLEV);
- if (fifoamount == 0) {
- /* Shouldn't happen. */
- break;
- }
- } else {
- fifoamount = 1;
- }
- }
- }
-
- /* Read sample and store in Comedi's circular buffer. */
- if (comedi_buf_put(async, pci230_ai_read(dev)) == 0) {
- events |= COMEDI_CB_ERROR | COMEDI_CB_OVERFLOW;
- comedi_error(dev, "AI buffer overflow");
- break;
- }
- fifoamount--;
- devpriv->ai_scan_pos++;
- if (devpriv->ai_scan_pos == scanlen) {
- /* End of scan. */
- devpriv->ai_scan_pos = 0;
- devpriv->ai_scan_count--;
- async->events |= COMEDI_CB_EOS;
- }
- }
-
- if (!devpriv->ai_continuous && (devpriv->ai_scan_count == 0)) {
- /* End of acquisition. */
- events |= COMEDI_CB_EOA;
- } else {
- /* More samples required, tell Comedi to block. */
- events |= COMEDI_CB_BLOCK;
- }
- async->events |= events;
-
- if ((async->events & (COMEDI_CB_EOA | COMEDI_CB_ERROR |
- COMEDI_CB_OVERFLOW)) != 0) {
- /* disable hardware conversions */
- pci230_ai_stop(dev, s);
- } else {
- /* update FIFO interrupt trigger level */
- pci230_ai_update_fifo_trigger_level(dev, s);
- }
-}
-
-static void pci230_ai_stop(struct comedi_device *dev,
- struct comedi_subdevice *s)
-{
- struct pci230_private *devpriv = dev->private;
- unsigned long irqflags;
- struct comedi_cmd *cmd;
- int started;
-
- spin_lock_irqsave(&devpriv->ai_stop_spinlock, irqflags);
- started = test_and_clear_bit(AI_CMD_STARTED, &devpriv->state);
- spin_unlock_irqrestore(&devpriv->ai_stop_spinlock, irqflags);
- if (!started)
- return;
-
-
- cmd = &s->async->cmd;
- if (cmd->convert_src == TRIG_TIMER) {
- /* Stop conversion rate generator. */
- pci230_cancel_ct(dev, 2);
- }
- if (cmd->scan_begin_src != TRIG_FOLLOW) {
- /* Stop scan period monostable. */
- pci230_cancel_ct(dev, 0);
- }
-
- spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
- /* Disable ADC interrupt and wait for interrupt routine to finish
- * running unless we are called from the interrupt routine. */
- devpriv->int_en &= ~PCI230_INT_ADC;
- while (devpriv->intr_running && devpriv->intr_cpuid != THISCPU) {
- spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
- spin_lock_irqsave(&devpriv->isr_spinlock, irqflags);
- }
- if (devpriv->ier != devpriv->int_en) {
- devpriv->ier = devpriv->int_en;
- outb(devpriv->ier, devpriv->iobase1 + PCI230_INT_SCE);
- }
- spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
-
- /* Reset FIFO, disable FIFO and set start conversion source to none.
- * Keep se/diff and bip/uni settings */
- devpriv->adccon = (devpriv->adccon & (PCI230_ADC_IR_MASK
- | PCI230_ADC_IM_MASK)) |
- PCI230_ADC_TRIG_NONE;
- outw(devpriv->adccon | PCI230_ADC_FIFO_RESET,
- dev->iobase + PCI230_ADCCON);
-
- /* Release resources. */
- put_all_resources(dev, OWNER_AICMD);
-}
-
-static int pci230_ai_cancel(struct comedi_device *dev,
- struct comedi_subdevice *s)
-{
- pci230_ai_stop(dev, s);
- return 0;
-}
-
/* Check if PCI device matches a specific board. */
static bool pci230_match_pci_board(const struct pci230_board *board,
struct pci_dev *pci_dev)
git.openpandora.org / pandora-kernel.git / commitdiff