N: Pavel Machek
E: pavel@ucw.cz
-E: pavel@suse.cz
D: Softcursor for vga, hypertech cdrom support, vcsa bugfix, nbd
D: sun4/330 port, capabilities for elf, speedup for rm on ext2, USB,
D: work on suspend-to-ram/disk, killing duplicates from ioctl32
What: /sys/firmware/memmap/
Date: June 2008
-Contact: Bernhard Walle <bwalle@suse.de>
+Contact: Bernhard Walle <bernhard.walle@gmx.de>
Description:
On all platforms, the firmware provides a memory map which the
kernel reads. The resources from that memory map are registered
int pcie_port_service_register(struct pcie_port_service_driver *new)
-This API replaces the Linux Driver Model's pci_module_init API. A
+This API replaces the Linux Driver Model's pci_register_driver API. A
service driver should always calls pcie_port_service_register at
module init. Note that after service driver being loaded, calls
such as pci_enable_device(dev) and pci_set_master(dev) are no longer
When a task is moved from one cgroup to another, it gets a new
css_set pointer - if there's an already existing css_set with the
desired collection of cgroups then that group is reused, else a new
-css_set is allocated. Note that the current implementation uses a
-linear search to locate an appropriate existing css_set, so isn't
-very efficient. A future version will use a hash table for better
-performance.
+css_set is allocated. The appropriate existing css_set is located by
+looking into a hash table.
To allow access from a cgroup to the css_sets (and hence tasks)
that comprise it, a set of cg_cgroup_link objects form a lattice;
--- /dev/null
+/* Disk protection for HP machines.
+ *
+ * Copyright 2008 Eric Piel
+ * Copyright 2009 Pavel Machek <pavel@suse.cz>
+ *
+ * GPLv2.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+#include <signal.h>
+
+void write_int(char *path, int i)
+{
+ char buf[1024];
+ int fd = open(path, O_RDWR);
+ if (fd < 0) {
+ perror("open");
+ exit(1);
+ }
+ sprintf(buf, "%d", i);
+ if (write(fd, buf, strlen(buf)) != strlen(buf)) {
+ perror("write");
+ exit(1);
+ }
+ close(fd);
+}
+
+void set_led(int on)
+{
+ write_int("/sys/class/leds/hp::hddprotect/brightness", on);
+}
+
+void protect(int seconds)
+{
+ write_int("/sys/block/sda/device/unload_heads", seconds*1000);
+}
+
+int on_ac(void)
+{
+// /sys/class/power_supply/AC0/online
+}
+
+int lid_open(void)
+{
+// /proc/acpi/button/lid/LID/state
+}
+
+void ignore_me(void)
+{
+ protect(0);
+ set_led(0);
+
+}
+
+int main(int argc, char* argv[])
+{
+ int fd, ret;
+
+ fd = open("/dev/freefall", O_RDONLY);
+ if (fd < 0) {
+ perror("open");
+ return EXIT_FAILURE;
+ }
+
+ signal(SIGALRM, ignore_me);
+
+ for (;;) {
+ unsigned char count;
+
+ ret = read(fd, &count, sizeof(count));
+ alarm(0);
+ if ((ret == -1) && (errno == EINTR)) {
+ /* Alarm expired, time to unpark the heads */
+ continue;
+ }
+
+ if (ret != sizeof(count)) {
+ perror("read");
+ break;
+ }
+
+ protect(21);
+ set_led(1);
+ if (1 || on_ac() || lid_open()) {
+ alarm(2);
+ } else {
+ alarm(20);
+ }
+ }
+
+ close(fd);
+ return EXIT_SUCCESS;
+}
This driver also provides an absolute input class device, allowing
the laptop to act as a pinball machine-esque joystick.
+Another feature of the driver is misc device called "freefall" that
+acts similar to /dev/rtc and reacts on free-fall interrupts received
+from the device. It supports blocking operations, poll/select and
+fasync operation modes. You must read 1 bytes from the device. The
+result is number of free-fall interrupts since the last successful
+read (or 255 if number of interrupts would not fit).
+
+
Axes orientation
----------------
events were lost, the trace is incomplete. You should enlarge the buffers and
try again. Buffers are enlarged by first seeing how large the current buffers
are:
-$ cat /debug/tracing/trace_entries
+$ cat /debug/tracing/buffer_size_kb
gives you a number. Approximately double this number and write it back, for
instance:
-$ echo 0 > /debug/tracing/tracing_enabled
-$ echo 128000 > /debug/tracing/trace_entries
-$ echo 1 > /debug/tracing/tracing_enabled
+$ echo 128000 > /debug/tracing/buffer_size_kb
Then start again from the top.
If you are doing a trace for a driver project, e.g. Nouveau, you should also
S: Maintained
HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
-P: Robert Love
-M: rlove@rlove.org
-M: linux-kernel@vger.kernel.org
-W: http://www.kernel.org/pub/linux/kernel/people/rml/hdaps/
+P: Frank Seidel
+M: frank@f-seidel.de
+L: lm-sensors@lm-sensors.org
+W: http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
S: Maintained
GSPCA FINEPIX SUBDRIVER
HIBERNATION (aka Software Suspend, aka swsusp)
P: Pavel Machek
-M: pavel@suse.cz
+M: pavel@ucw.cz
P: Rafael J. Wysocki
M: rjw@sisk.pl
L: linux-pm@lists.linux-foundation.org
P: Len Brown
M: len.brown@intel.com
P: Pavel Machek
-M: pavel@suse.cz
+M: pavel@ucw.cz
P: Rafael J. Wysocki
M: rjw@sisk.pl
L: linux-pm@lists.linux-foundation.org
S: Maintained
ZR36067 VIDEO FOR LINUX DRIVER
-P: Ronald Bultje
-M: rbultje@ronald.bitfreak.net
L: mjpeg-users@lists.sourceforge.net
+L: linux-media@vger.kernel.org
W: http://mjpeg.sourceforge.net/driver-zoran/
-S: Maintained
+T: Mercurial http://linuxtv.org/hg/v4l-dvb
+S: Odd Fixes
ZS DECSTATION Z85C30 SERIAL DRIVER
P: Maciej W. Rozycki
# output directory.
outputmakefile:
ifneq ($(KBUILD_SRC),)
+ $(Q)ln -fsn $(srctree) source
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
$(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
endif
mkdir -p include2; \
ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm; \
fi
- ln -fsn $(srctree) source
endif
# prepare2 creates a makefile if using a separate output directory
if (cpuid != boot_cpuid) {
flags |= 0x00040000UL; /* "remain halted" */
*pflags = flags;
- cpu_clear(cpuid, cpu_present_map);
- cpu_clear(cpuid, cpu_possible_map);
+ set_cpu_present(cpuid, false);
+ set_cpu_possible(cpuid, false);
halt();
}
#endif
#ifdef CONFIG_SMP
/* Wait for the secondaries to halt. */
- cpu_clear(boot_cpuid, cpu_present_map);
- cpu_clear(boot_cpuid, cpu_possible_map);
+ set_cpu_present(boot_cpuid, false);
+ set_cpu_possible(boot_cpuid, false);
while (cpus_weight(cpu_present_map))
barrier();
#endif
smp_callin(void)
{
int cpuid = hard_smp_processor_id();
- cpumask_t mask = cpu_online_map;
- if (cpu_test_and_set(cpuid, mask)) {
+ if (cpu_online(cpuid)) {
printk("??, cpu 0x%x already present??\n", cpuid);
BUG();
}
+ set_cpu_online(cpuid, true);
/* Turn on machine checks. */
wrmces(7);
((char *)cpubase + i*hwrpb->processor_size);
if ((cpu->flags & 0x1cc) == 0x1cc) {
smp_num_probed++;
- cpu_set(i, cpu_possible_map);
- cpu_set(i, cpu_present_map);
+ set_cpu_possible(i, true);
+ set_cpu_present(i, true);
cpu->pal_revision = boot_cpu_palrev;
}
/* Nothing to do on a UP box, or when told not to. */
if (smp_num_probed == 1 || max_cpus == 0) {
- cpu_possible_map = cpumask_of_cpu(boot_cpuid);
- cpu_present_map = cpumask_of_cpu(boot_cpuid);
+ init_cpu_possible(cpumask_of(boot_cpuid));
+ init_cpu_present(cpumask_of(boot_cpuid));
printk(KERN_INFO "SMP mode deactivated.\n");
return;
}
#include <linux/ioctl.h>
+/* Select x86 specific features in <linux/kvm.h> */
+#define __KVM_HAVE_IOAPIC
+#define __KVM_HAVE_DEVICE_ASSIGNMENT
+
/* Architectural interrupt line count. */
#define KVM_NR_INTERRUPTS 256
#endif
}
-#ifdef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
-extern int early_pfn_to_nid(unsigned long pfn);
-#endif
-
#ifdef CONFIG_IA64_DIG /* DIG systems are small */
# define MAX_PHYSNODE_ID 8
# define NR_NODE_MEMBLKS (MAX_NUMNODES * 8)
}
}
+void kvm_arch_sync_events(struct kvm *kvm)
+{
+}
+
void kvm_arch_destroy_vm(struct kvm *kvm)
{
kvm_iommu_unmap_guest(kvm);
if (!vmm_fpswa_interface)
return (fpswa_ret_t) {-1, 0, 0, 0};
- /*
- * Just let fpswa driver to use hardware fp registers.
- * No fp register is valid in memory.
- */
memset(&fp_state, 0, sizeof(fp_state_t));
/*
+ * compute fp_state. only FP registers f6 - f11 are used by the
+ * vmm, so set those bits in the mask and set the low volatile
+ * pointer to point to these registers.
+ */
+ fp_state.bitmask_low64 = 0xfc0; /* bit6..bit11 */
+
+ fp_state.fp_state_low_volatile = (fp_state_low_volatile_t *) ®s->f6;
+
+ /*
* unsigned long (*EFI_FPSWA) (
* unsigned long trap_type,
* void *Bundle,
status = vmm_handle_fpu_swa(0, regs, isr);
if (!status)
return ;
- else if (-EAGAIN == status) {
- vcpu_decrement_iip(vcpu);
- return ;
- }
break;
}
* SPARSEMEM to allocate the SPARSEMEM sectionmap on the NUMA node where
* the section resides.
*/
-int early_pfn_to_nid(unsigned long pfn)
+int __meminit __early_pfn_to_nid(unsigned long pfn)
{
int i, section = pfn >> PFN_SECTION_SHIFT, ssec, esec;
return node_memblk[i].nid;
}
- return 0;
+ return -1;
}
#ifdef CONFIG_MEMORY_HOTPLUG
/* It should be preserving the high 48 bits and then specifically */
/* preserving _PAGE_SECONDARY | _PAGE_GROUP_IX */
#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \
- _PAGE_HPTEFLAGS)
+ _PAGE_HPTEFLAGS | _PAGE_SPECIAL)
/* Bits to mask out from a PMD to get to the PTE page */
#define PMD_MASKED_BITS 0
* pgprot changes
*/
#define _PAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \
- _PAGE_ACCESSED)
+ _PAGE_ACCESSED | _PAGE_SPECIAL)
/* Bits to mask out from a PMD to get to the PTE page */
#define PMD_MASKED_BITS 0x1ff
#define PMD_PAGE_SIZE(pmd) bad_call_to_PMD_PAGE_SIZE()
#endif
-#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \
+ _PAGE_SPECIAL)
#define PAGE_PROT_BITS (_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \
unsigned int areg, struct pt_regs *regs,
unsigned int flags, unsigned int length)
{
- char *ptr = (char *) ¤t->thread.TS_FPR(reg);
+ char *ptr;
int ret = 0;
flush_vsx_to_thread(current);
+ if (reg < 32)
+ ptr = (char *) ¤t->thread.TS_FPR(reg);
+ else
+ ptr = (char *) ¤t->thread.vr[reg - 32];
+
if (flags & ST)
ret = __copy_to_user(addr, ptr, length);
else {
}
}
+void kvm_arch_sync_events(struct kvm *kvm)
+{
+}
+
void kvm_arch_destroy_vm(struct kvm *kvm)
{
kvmppc_free_vcpus(kvm);
#include <linux/notifier.h>
#include <linux/lmb.h>
#include <linux/of.h>
+#include <linux/pfn.h>
#include <asm/sparsemem.h>
#include <asm/prom.h>
#include <asm/system.h>
unsigned long physbase = lmb.reserved.region[i].base;
unsigned long size = lmb.reserved.region[i].size;
unsigned long start_pfn = physbase >> PAGE_SHIFT;
- unsigned long end_pfn = ((physbase + size) >> PAGE_SHIFT);
+ unsigned long end_pfn = PFN_UP(physbase + size);
struct node_active_region node_ar;
unsigned long node_end_pfn = node->node_start_pfn +
node->node_spanned_pages;
*/
if (end_pfn > node_ar.end_pfn)
reserve_size = (node_ar.end_pfn << PAGE_SHIFT)
- - (start_pfn << PAGE_SHIFT);
+ - physbase;
/*
* Only worry about *this* node, others may not
* yet have valid NODE_DATA().
return result;
}
-core_initcall(ps3_mm_add_memory);
+device_initcall(ps3_mm_add_memory);
/*============================================================================*/
/* dma routines */
}
}
+void kvm_arch_sync_events(struct kvm *kvm)
+{
+}
+
void kvm_arch_destroy_vm(struct kvm *kvm)
{
kvm_free_vcpus(kvm);
Add a simple leak tracer to the IOMMU code. This is useful when you
are debugging a buggy device driver that leaks IOMMU mappings.
-config MMIOTRACE
- bool "Memory mapped IO tracing"
- depends on DEBUG_KERNEL && PCI
- select TRACING
- help
- Mmiotrace traces Memory Mapped I/O access and is meant for
- debugging and reverse engineering. It is called from the ioremap
- implementation and works via page faults. Tracing is disabled by
- default and can be enabled at run-time.
-
- See Documentation/tracers/mmiotrace.txt.
- If you are not helping to develop drivers, say N.
-
-config MMIOTRACE_TEST
- tristate "Test module for mmiotrace"
- depends on MMIOTRACE && m
- help
- This is a dumb module for testing mmiotrace. It is very dangerous
- as it will write garbage to IO memory starting at a given address.
- However, it should be safe to use on e.g. unused portion of VRAM.
-
- Say N, unless you absolutely know what you are doing.
+config HAVE_MMIOTRACE_SUPPORT
+ def_bool y
#
# IO delay types:
#include <linux/types.h>
#include <linux/ioctl.h>
+/* Select x86 specific features in <linux/kvm.h> */
+#define __KVM_HAVE_PIT
+#define __KVM_HAVE_IOAPIC
+#define __KVM_HAVE_DEVICE_ASSIGNMENT
+#define __KVM_HAVE_MSI
+#define __KVM_HAVE_USER_NMI
+
/* Architectural interrupt line count. */
#define KVM_NR_INTERRUPTS 256
get_memcfg_numa_flat();
}
-extern int early_pfn_to_nid(unsigned long pfn);
-
extern void resume_map_numa_kva(pgd_t *pgd);
#else /* !CONFIG_NUMA */
#define node_end_pfn(nid) (NODE_DATA(nid)->node_start_pfn + \
NODE_DATA(nid)->node_spanned_pages)
-extern int early_pfn_to_nid(unsigned long pfn);
-
#ifdef CONFIG_NUMA_EMU
#define FAKE_NODE_MIN_SIZE (64 * 1024 * 1024)
#define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1UL))
typedef struct { pgprotval_t pgprot; } pgprot_t;
extern int page_is_ram(unsigned long pagenr);
-extern int pagerange_is_ram(unsigned long start, unsigned long end);
extern int devmem_is_allowed(unsigned long pagenr);
extern void map_devmem(unsigned long pfn, unsigned long size,
pgprot_t vma_prot);
PVOP_VCALL0(pv_cpu_ops.lazy_mode.leave);
}
-static inline void arch_flush_lazy_cpu_mode(void)
-{
- if (unlikely(paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU)) {
- arch_leave_lazy_cpu_mode();
- arch_enter_lazy_cpu_mode();
- }
-}
-
+void arch_flush_lazy_cpu_mode(void);
#define __HAVE_ARCH_ENTER_LAZY_MMU_MODE
static inline void arch_enter_lazy_mmu_mode(void)
PVOP_VCALL0(pv_mmu_ops.lazy_mode.leave);
}
-static inline void arch_flush_lazy_mmu_mode(void)
-{
- if (unlikely(paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU)) {
- arch_leave_lazy_mmu_mode();
- arch_enter_lazy_mmu_mode();
- }
-}
+void arch_flush_lazy_mmu_mode(void);
static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx,
unsigned long phys, pgprot_t flags)
data->cpu = pol->cpu;
data->currpstate = HW_PSTATE_INVALID;
- rc = powernow_k8_cpu_init_acpi(data);
- if (rc) {
+ if (powernow_k8_cpu_init_acpi(data)) {
/*
* Use the PSB BIOS structure. This is only availabe on
* an UP version, and is deprecated by AMD.
"ACPI maintainers and complain to your BIOS "
"vendor.\n");
#endif
- goto err_out;
+ kfree(data);
+ return -ENODEV;
}
if (pol->cpu != 0) {
printk(KERN_ERR FW_BUG PFX "No ACPI _PSS objects for "
"CPU other than CPU0. Complain to your BIOS "
"vendor.\n");
- goto err_out;
+ kfree(data);
+ return -ENODEV;
}
rc = find_psb_table(data);
if (rc) {
- goto err_out;
+ kfree(data);
+ return -ENODEV;
}
/* Take a crude guess here.
* That guess was in microseconds, so multiply with 1000 */
now = hpet_readl(HPET_COUNTER);
cmp = now + (unsigned long) delta;
cfg = hpet_readl(HPET_Tn_CFG(timer));
+ /* Make sure we use edge triggered interrupts */
+ cfg &= ~HPET_TN_LEVEL;
cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
HPET_TN_SETVAL | HPET_TN_32BIT;
hpet_writel(cfg, HPET_Tn_CFG(timer));
static void __init platform_detect(void)
{
/* stopgap until OFW support is added to the kernel */
- olpc_platform_info.boardrev = 0xc2;
+ olpc_platform_info.boardrev = olpc_board(0xc2);
}
#endif
return __get_cpu_var(paravirt_lazy_mode);
}
+void arch_flush_lazy_mmu_mode(void)
+{
+ preempt_disable();
+
+ if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU) {
+ WARN_ON(preempt_count() == 1);
+ arch_leave_lazy_mmu_mode();
+ arch_enter_lazy_mmu_mode();
+ }
+
+ preempt_enable();
+}
+
+void arch_flush_lazy_cpu_mode(void)
+{
+ preempt_disable();
+
+ if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU) {
+ WARN_ON(preempt_count() == 1);
+ arch_leave_lazy_cpu_mode();
+ arch_enter_lazy_cpu_mode();
+ }
+
+ preempt_enable();
+}
+
struct pv_info pv_info = {
.name = "bare hardware",
.paravirt_enabled = 0,
static void ptrace_bts_detach(struct task_struct *child)
{
- if (unlikely(child->bts)) {
- ds_release_bts(child->bts);
- child->bts = NULL;
-
- ptrace_bts_free_buffer(child);
- }
+ /*
+ * Ptrace_detach() races with ptrace_untrace() in case
+ * the child dies and is reaped by another thread.
+ *
+ * We only do the memory accounting at this point and
+ * leave the buffer deallocation and the bts tracer
+ * release to ptrace_bts_untrace() which will be called
+ * later on with tasklist_lock held.
+ */
+ release_locked_buffer(child->bts_buffer, child->bts_size);
}
#else
static inline void ptrace_bts_fork(struct task_struct *tsk) {}
local_irq_enable();
}
+static inline void conditional_cli(struct pt_regs *regs)
+{
+ if (regs->flags & X86_EFLAGS_IF)
+ local_irq_disable();
+}
+
static inline void preempt_conditional_cli(struct pt_regs *regs)
{
if (regs->flags & X86_EFLAGS_IF)
#ifdef CONFIG_X86_32
debug_vm86:
+ /* reenable preemption: handle_vm86_trap() might sleep */
+ dec_preempt_count();
handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, 1);
- preempt_conditional_cli(regs);
+ conditional_cli(regs);
return;
#endif
hrtimer_add_expires_ns(&pt->timer, pt->period);
pt->scheduled = hrtimer_get_expires_ns(&pt->timer);
if (pt->period)
- ps->channels[0].count_load_time = hrtimer_get_expires(&pt->timer);
+ ps->channels[0].count_load_time = ktime_get();
return (pt->period == 0 ? 0 : 1);
}
}
EXPORT_SYMBOL_GPL(kvm_inject_pending_timer_irqs);
-void kvm_timer_intr_post(struct kvm_vcpu *vcpu, int vec)
-{
- kvm_apic_timer_intr_post(vcpu, vec);
- /* TODO: PIT, RTC etc. */
-}
-EXPORT_SYMBOL_GPL(kvm_timer_intr_post);
-
void __kvm_migrate_timers(struct kvm_vcpu *vcpu)
{
__kvm_migrate_apic_timer(vcpu);
void kvm_pic_reset(struct kvm_kpic_state *s);
-void kvm_timer_intr_post(struct kvm_vcpu *vcpu, int vec);
void kvm_inject_pending_timer_irqs(struct kvm_vcpu *vcpu);
void kvm_inject_apic_timer_irqs(struct kvm_vcpu *vcpu);
void kvm_apic_nmi_wd_deliver(struct kvm_vcpu *vcpu);
#include "kvm_cache_regs.h"
#include "irq.h"
+#ifndef CONFIG_X86_64
+#define mod_64(x, y) ((x) - (y) * div64_u64(x, y))
+#else
+#define mod_64(x, y) ((x) % (y))
+#endif
+
#define PRId64 "d"
#define PRIx64 "llx"
#define PRIu64 "u"
static u32 apic_get_tmcct(struct kvm_lapic *apic)
{
- u64 counter_passed;
- ktime_t passed, now;
+ ktime_t remaining;
+ s64 ns;
u32 tmcct;
ASSERT(apic != NULL);
- now = apic->timer.dev.base->get_time();
- tmcct = apic_get_reg(apic, APIC_TMICT);
-
/* if initial count is 0, current count should also be 0 */
- if (tmcct == 0)
+ if (apic_get_reg(apic, APIC_TMICT) == 0)
return 0;
- if (unlikely(ktime_to_ns(now) <=
- ktime_to_ns(apic->timer.last_update))) {
- /* Wrap around */
- passed = ktime_add(( {
- (ktime_t) {
- .tv64 = KTIME_MAX -
- (apic->timer.last_update).tv64}; }
- ), now);
- apic_debug("time elapsed\n");
- } else
- passed = ktime_sub(now, apic->timer.last_update);
-
- counter_passed = div64_u64(ktime_to_ns(passed),
- (APIC_BUS_CYCLE_NS * apic->timer.divide_count));
-
- if (counter_passed > tmcct) {
- if (unlikely(!apic_lvtt_period(apic))) {
- /* one-shot timers stick at 0 until reset */
- tmcct = 0;
- } else {
- /*
- * periodic timers reset to APIC_TMICT when they
- * hit 0. The while loop simulates this happening N
- * times. (counter_passed %= tmcct) would also work,
- * but might be slower or not work on 32-bit??
- */
- while (counter_passed > tmcct)
- counter_passed -= tmcct;
- tmcct -= counter_passed;
- }
- } else {
- tmcct -= counter_passed;
- }
+ remaining = hrtimer_expires_remaining(&apic->timer.dev);
+ if (ktime_to_ns(remaining) < 0)
+ remaining = ktime_set(0, 0);
+
+ ns = mod_64(ktime_to_ns(remaining), apic->timer.period);
+ tmcct = div64_u64(ns, (APIC_BUS_CYCLE_NS * apic->timer.divide_count));
return tmcct;
}
{
ktime_t now = apic->timer.dev.base->get_time();
- apic->timer.last_update = now;
-
apic->timer.period = apic_get_reg(apic, APIC_TMICT) *
APIC_BUS_CYCLE_NS * apic->timer.divide_count;
atomic_set(&apic->timer.pending, 0);
}
}
-void kvm_apic_timer_intr_post(struct kvm_vcpu *vcpu, int vec)
-{
- struct kvm_lapic *apic = vcpu->arch.apic;
-
- if (apic && apic_lvt_vector(apic, APIC_LVTT) == vec)
- apic->timer.last_update = ktime_add_ns(
- apic->timer.last_update,
- apic->timer.period);
-}
-
int kvm_get_apic_interrupt(struct kvm_vcpu *vcpu)
{
int vector = kvm_apic_has_interrupt(vcpu);
atomic_t pending;
s64 period; /* unit: ns */
u32 divide_count;
- ktime_t last_update;
struct hrtimer dev;
} timer;
struct kvm_vcpu *vcpu;
void kvm_apic_post_state_restore(struct kvm_vcpu *vcpu);
int kvm_lapic_enabled(struct kvm_vcpu *vcpu);
int kvm_lapic_find_highest_irr(struct kvm_vcpu *vcpu);
-void kvm_apic_timer_intr_post(struct kvm_vcpu *vcpu, int vec);
void kvm_lapic_set_vapic_addr(struct kvm_vcpu *vcpu, gpa_t vapic_addr);
void kvm_lapic_sync_from_vapic(struct kvm_vcpu *vcpu);
if (largepage)
spte |= PT_PAGE_SIZE_MASK;
if (mt_mask) {
- mt_mask = get_memory_type(vcpu, gfn) <<
- kvm_x86_ops->get_mt_mask_shift();
+ if (!kvm_is_mmio_pfn(pfn)) {
+ mt_mask = get_memory_type(vcpu, gfn) <<
+ kvm_x86_ops->get_mt_mask_shift();
+ mt_mask |= VMX_EPT_IGMT_BIT;
+ } else
+ mt_mask = MTRR_TYPE_UNCACHABLE <<
+ kvm_x86_ops->get_mt_mask_shift();
spte |= mt_mask;
}
/* Okay, we can deliver the interrupt: grab it and update PIC state. */
intr_vector = kvm_cpu_get_interrupt(vcpu);
svm_inject_irq(svm, intr_vector);
- kvm_timer_intr_post(vcpu, intr_vector);
out:
update_cr8_intercept(vcpu);
}
data = vmcs_readl(GUEST_SYSENTER_ESP);
break;
default:
+ vmx_load_host_state(to_vmx(vcpu));
msr = find_msr_entry(to_vmx(vcpu), msr_index);
if (msr) {
data = msr->data;
}
if (vcpu->arch.interrupt.pending) {
vmx_inject_irq(vcpu, vcpu->arch.interrupt.nr);
- kvm_timer_intr_post(vcpu, vcpu->arch.interrupt.nr);
if (kvm_cpu_has_interrupt(vcpu))
enable_irq_window(vcpu);
}
if (vm_need_ept()) {
bypass_guest_pf = 0;
kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
- VMX_EPT_WRITABLE_MASK |
- VMX_EPT_IGMT_BIT);
+ VMX_EPT_WRITABLE_MASK);
kvm_mmu_set_mask_ptes(0ull, 0ull, 0ull, 0ull,
VMX_EPT_EXECUTABLE_MASK,
VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT);
case KVM_CAP_MMU_SHADOW_CACHE_CONTROL:
case KVM_CAP_SET_TSS_ADDR:
case KVM_CAP_EXT_CPUID:
- case KVM_CAP_CLOCKSOURCE:
case KVM_CAP_PIT:
case KVM_CAP_NOP_IO_DELAY:
case KVM_CAP_MP_STATE:
case KVM_CAP_IOMMU:
r = iommu_found();
break;
+ case KVM_CAP_CLOCKSOURCE:
+ r = boot_cpu_has(X86_FEATURE_CONSTANT_TSC);
+ break;
default:
r = 0;
break;
}
-void kvm_arch_destroy_vm(struct kvm *kvm)
+void kvm_arch_sync_events(struct kvm *kvm)
{
kvm_free_all_assigned_devices(kvm);
+}
+
+void kvm_arch_destroy_vm(struct kvm *kvm)
+{
kvm_iommu_unmap_guest(kvm);
kvm_free_pit(kvm);
kfree(kvm->arch.vpic);
return 0;
}
-int pagerange_is_ram(unsigned long start, unsigned long end)
-{
- int ram_page = 0, not_rampage = 0;
- unsigned long page_nr;
-
- for (page_nr = (start >> PAGE_SHIFT); page_nr < (end >> PAGE_SHIFT);
- ++page_nr) {
- if (page_is_ram(page_nr))
- ram_page = 1;
- else
- not_rampage = 1;
-
- if (ram_page == not_rampage)
- return -1;
- }
-
- return ram_page;
-}
-
/*
* Fix up the linear direct mapping of the kernel to avoid cache attribute
* conflicts.
return shift;
}
-int early_pfn_to_nid(unsigned long pfn)
+int __meminit __early_pfn_to_nid(unsigned long pfn)
{
return phys_to_nid(pfn << PAGE_SHIFT);
}
address = cpa->vaddr[cpa->curpage];
else
address = *cpa->vaddr;
-
repeat:
kpte = lookup_address(address, &level);
if (!kpte)
vm_unmap_aliases();
+ /*
+ * If we're called with lazy mmu updates enabled, the
+ * in-memory pte state may be stale. Flush pending updates to
+ * bring them up to date.
+ */
+ arch_flush_lazy_mmu_mode();
+
cpa.vaddr = addr;
cpa.numpages = numpages;
cpa.mask_set = mask_set;
} else
cpa_flush_all(cache);
+ /*
+ * If we've been called with lazy mmu updates enabled, then
+ * make sure that everything gets flushed out before we
+ * return.
+ */
+ arch_flush_lazy_mmu_mode();
+
out:
return ret;
}
static struct memtype *cached_entry;
static u64 cached_start;
+static int pat_pagerange_is_ram(unsigned long start, unsigned long end)
+{
+ int ram_page = 0, not_rampage = 0;
+ unsigned long page_nr;
+
+ for (page_nr = (start >> PAGE_SHIFT); page_nr < (end >> PAGE_SHIFT);
+ ++page_nr) {
+ /*
+ * For legacy reasons, physical address range in the legacy ISA
+ * region is tracked as non-RAM. This will allow users of
+ * /dev/mem to map portions of legacy ISA region, even when
+ * some of those portions are listed(or not even listed) with
+ * different e820 types(RAM/reserved/..)
+ */
+ if (page_nr >= (ISA_END_ADDRESS >> PAGE_SHIFT) &&
+ page_is_ram(page_nr))
+ ram_page = 1;
+ else
+ not_rampage = 1;
+
+ if (ram_page == not_rampage)
+ return -1;
+ }
+
+ return ram_page;
+}
+
/*
* For RAM pages, mark the pages as non WB memory type using
* PageNonWB (PG_arch_1). We allow only one set_memory_uc() or
if (new_type)
*new_type = actual_type;
- /*
- * For legacy reasons, some parts of the physical address range in the
- * legacy 1MB region is treated as non-RAM (even when listed as RAM in
- * the e820 tables). So we will track the memory attributes of this
- * legacy 1MB region using the linear memtype_list always.
- */
- if (end >= ISA_END_ADDRESS) {
- is_range_ram = pagerange_is_ram(start, end);
- if (is_range_ram == 1)
- return reserve_ram_pages_type(start, end, req_type,
- new_type);
- else if (is_range_ram < 0)
- return -EINVAL;
- }
+ is_range_ram = pat_pagerange_is_ram(start, end);
+ if (is_range_ram == 1)
+ return reserve_ram_pages_type(start, end, req_type,
+ new_type);
+ else if (is_range_ram < 0)
+ return -EINVAL;
new = kmalloc(sizeof(struct memtype), GFP_KERNEL);
if (!new)
if (is_ISA_range(start, end - 1))
return 0;
- /*
- * For legacy reasons, some parts of the physical address range in the
- * legacy 1MB region is treated as non-RAM (even when listed as RAM in
- * the e820 tables). So we will track the memory attributes of this
- * legacy 1MB region using the linear memtype_list always.
- */
- if (end >= ISA_END_ADDRESS) {
- is_range_ram = pagerange_is_ram(start, end);
- if (is_range_ram == 1)
- return free_ram_pages_type(start, end);
- else if (is_range_ram < 0)
- return -EINVAL;
- }
+ is_range_ram = pat_pagerange_is_ram(start, end);
+ if (is_range_ram == 1)
+ return free_ram_pages_type(start, end);
+ else if (is_range_ram < 0)
+ return -EINVAL;
spin_lock(&memtype_lock);
list_for_each_entry(entry, &memtype_list, nd) {
unsigned long flags;
unsigned long want_flags = (pgprot_val(*vma_prot) & _PAGE_CACHE_MASK);
- is_ram = pagerange_is_ram(paddr, paddr + size);
+ is_ram = pat_pagerange_is_ram(paddr, paddr + size);
- if (is_ram != 0) {
- /*
- * For mapping RAM pages, drivers need to call
- * set_memory_[uc|wc|wb] directly, for reserve and free, before
- * setting up the PTE.
- */
- WARN_ON_ONCE(1);
- return 0;
- }
+ /*
+ * reserve_pfn_range() doesn't support RAM pages.
+ */
+ if (is_ram != 0)
+ return -EINVAL;
ret = reserve_memtype(paddr, paddr + size, want_flags, &flags);
if (ret)
{
int is_ram;
- is_ram = pagerange_is_ram(paddr, paddr + size);
+ is_ram = pat_pagerange_is_ram(paddr, paddr + size);
if (is_ram == 0)
free_memtype(paddr, paddr + size);
}
static inline void setbit128_bbe(void *b, int bit)
{
- __set_bit(bit ^ 0x78, b);
+ __set_bit(bit ^ (0x80 -
+#ifdef __BIG_ENDIAN
+ BITS_PER_LONG
+#else
+ BITS_PER_BYTE
+#endif
+ ), b);
}
static int setkey(struct crypto_tfm *parent, const u8 *key,
else
iowrite32_rep(data_addr, buf, words);
+ /* Transfer trailing bytes, if any */
if (unlikely(slop)) {
- __le32 pad;
+ unsigned char pad[4];
+
+ /* Point buf to the tail of buffer */
+ buf += buflen - slop;
+
+ /*
+ * Use io*_rep() accessors here as well to avoid pointlessly
+ * swapping bytes to and fro on the big endian machines...
+ */
if (rw == READ) {
- pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
- memcpy(buf + buflen - slop, &pad, slop);
+ if (slop < 3)
+ ioread16_rep(data_addr, pad, 1);
+ else
+ ioread32_rep(data_addr, pad, 1);
+ memcpy(buf, pad, slop);
} else {
- memcpy(&pad, buf + buflen - slop, slop);
- iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
+ memcpy(pad, buf, slop);
+ if (slop < 3)
+ iowrite16_rep(data_addr, pad, 1);
+ else
+ iowrite32_rep(data_addr, pad, 1);
}
- words++;
}
- return words << 2;
+ return (buflen + 1) & ~1;
}
EXPORT_SYMBOL_GPL(ata_sff_data_xfer32);
{ "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
- { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES},
+ { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES },
+ { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES },
{ "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
#endif
static const struct pci_device_id via[] = {
+ { PCI_VDEVICE(VIA, 0x0415), },
{ PCI_VDEVICE(VIA, 0x0571), },
{ PCI_VDEVICE(VIA, 0x0581), },
{ PCI_VDEVICE(VIA, 0x1571), },
.hardreset = ATA_OP_NULL,
};
-/* OSDL bz3352 reports that nf2/3 controllers can't determine device
- * signature reliably. Also, the following thread reports detection
- * failure on cold boot with the standard debouncing timing.
+/* nf2 is ripe with hardreset related problems.
+ *
+ * kernel bz#3352 reports nf2/3 controllers can't determine device
+ * signature reliably. The following thread reports detection failure
+ * on cold boot with the standard debouncing timing.
*
* http://thread.gmane.org/gmane.linux.ide/34098
*
- * Debounce with hotplug timing and request follow-up SRST.
+ * And bz#12176 reports that hardreset simply doesn't work on nf2.
+ * Give up on it and just don't do hardreset.
*/
static struct ata_port_operations nv_nf2_ops = {
- .inherits = &nv_common_ops,
+ .inherits = &nv_generic_ops,
.freeze = nv_nf2_freeze,
.thaw = nv_nf2_thaw,
- .hardreset = nv_noclassify_hardreset,
};
/* For initial probing after boot and hot plugging, hardreset mostly
enum {
AOECMD_ATA,
AOECMD_CFG,
+ AOECMD_VEND_MIN = 0xf0,
AOEFL_RSP = (1<<3),
AOEFL_ERR = (1<<2),
aoecmd_cfg_rsp(skb);
break;
default:
+ if (h->cmd >= AOECMD_VEND_MIN)
+ break; /* don't complain about vendor commands */
printk(KERN_INFO "aoe: unknown cmd %d\n", h->cmd);
}
exit:
static void recalibrate_floppy(void);
static void floppy_shutdown(unsigned long);
+static int floppy_request_regions(int);
+static void floppy_release_regions(int);
static int floppy_grab_irq_and_dma(void);
static void floppy_release_irq_and_dma(void);
FDCS->rawcmd = 2;
if (user_reset_fdc(-1, FD_RESET_ALWAYS, 0)) {
/* free ioports reserved by floppy_grab_irq_and_dma() */
- release_region(FDCS->address + 2, 4);
- release_region(FDCS->address + 7, 1);
+ floppy_release_regions(fdc);
FDCS->address = -1;
FDCS->version = FDC_NONE;
continue;
FDCS->version = get_fdc_version();
if (FDCS->version == FDC_NONE) {
/* free ioports reserved by floppy_grab_irq_and_dma() */
- release_region(FDCS->address + 2, 4);
- release_region(FDCS->address + 7, 1);
+ floppy_release_regions(fdc);
FDCS->address = -1;
continue;
}
static DEFINE_SPINLOCK(floppy_usage_lock);
+static const struct io_region {
+ int offset;
+ int size;
+} io_regions[] = {
+ { 2, 1 },
+ /* address + 3 is sometimes reserved by pnp bios for motherboard */
+ { 4, 2 },
+ /* address + 6 is reserved, and may be taken by IDE.
+ * Unfortunately, Adaptec doesn't know this :-(, */
+ { 7, 1 },
+};
+
+static void floppy_release_allocated_regions(int fdc, const struct io_region *p)
+{
+ while (p != io_regions) {
+ p--;
+ release_region(FDCS->address + p->offset, p->size);
+ }
+}
+
+#define ARRAY_END(X) (&((X)[ARRAY_SIZE(X)]))
+
+static int floppy_request_regions(int fdc)
+{
+ const struct io_region *p;
+
+ for (p = io_regions; p < ARRAY_END(io_regions); p++) {
+ if (!request_region(FDCS->address + p->offset, p->size, "floppy")) {
+ DPRINT("Floppy io-port 0x%04lx in use\n", FDCS->address + p->offset);
+ floppy_release_allocated_regions(fdc, p);
+ return -EBUSY;
+ }
+ }
+ return 0;
+}
+
+static void floppy_release_regions(int fdc)
+{
+ floppy_release_allocated_regions(fdc, ARRAY_END(io_regions));
+}
+
static int floppy_grab_irq_and_dma(void)
{
unsigned long flags;
for (fdc = 0; fdc < N_FDC; fdc++) {
if (FDCS->address != -1) {
- if (!request_region(FDCS->address + 2, 4, "floppy")) {
- DPRINT("Floppy io-port 0x%04lx in use\n",
- FDCS->address + 2);
- goto cleanup1;
- }
- if (!request_region(FDCS->address + 7, 1, "floppy DIR")) {
- DPRINT("Floppy io-port 0x%04lx in use\n",
- FDCS->address + 7);
- goto cleanup2;
- }
- /* address + 6 is reserved, and may be taken by IDE.
- * Unfortunately, Adaptec doesn't know this :-(, */
+ if (floppy_request_regions(fdc))
+ goto cleanup;
}
}
for (fdc = 0; fdc < N_FDC; fdc++) {
fdc = 0;
irqdma_allocated = 1;
return 0;
-cleanup2:
- release_region(FDCS->address + 2, 4);
-cleanup1:
+cleanup:
fd_free_irq();
fd_free_dma();
- while (--fdc >= 0) {
- release_region(FDCS->address + 2, 4);
- release_region(FDCS->address + 7, 1);
- }
+ while (--fdc >= 0)
+ floppy_release_regions(fdc);
spin_lock_irqsave(&floppy_usage_lock, flags);
usage_count--;
spin_unlock_irqrestore(&floppy_usage_lock, flags);
#endif
old_fdc = fdc;
for (fdc = 0; fdc < N_FDC; fdc++)
- if (FDCS->address != -1) {
- release_region(FDCS->address + 2, 4);
- release_region(FDCS->address + 7, 1);
- }
+ if (FDCS->address != -1)
+ floppy_release_regions(fdc);
fdc = old_fdc;
}
dma_chan_name(chan), err);
else
break;
+ chan->private = NULL;
chan = NULL;
}
}
WARN_ONCE(chan->client_count != 1,
"chan reference count %d != 1\n", chan->client_count);
dma_chan_put(chan);
+ chan->private = NULL;
mutex_unlock(&dma_list_mutex);
}
EXPORT_SYMBOL_GPL(dma_release_channel);
unsigned long flags)
{
struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
- struct dw_dma_slave *dws = dwc->dws;
+ struct dw_dma_slave *dws = chan->private;
struct dw_desc *prev;
struct dw_desc *first;
u32 ctllo;
cfghi = DWC_CFGH_FIFO_MODE;
cfglo = 0;
- dws = dwc->dws;
+ dws = chan->private;
if (dws) {
/*
* We need controller-specific data to set up slave
spin_lock_bh(&dwc->lock);
list_splice_init(&dwc->free_list, &list);
dwc->descs_allocated = 0;
- dwc->dws = NULL;
/* Disable interrupts */
channel_clear_bit(dw, MASK.XFER, dwc->mask);
struct list_head queue;
struct list_head free_list;
- struct dw_dma_slave *dws;
-
unsigned int descs_allocated;
};
/*
* linux/drivers/firmware/memmap.c
* Copyright (C) 2008 SUSE LINUX Products GmbH
- * by Bernhard Walle <bwalle@suse.de>
+ * by Bernhard Walle <bernhard.walle@gmx.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License v2.0 as published by
XFree86 4.4 and above. If unsure, build this and i830 as modules and
the X server will load the correct one.
-endchoice
-
config DRM_I915_KMS
bool "Enable modesetting on intel by default"
depends on DRM_I915
help
- Choose this option if you want kernel modesetting enabled by default,
- and you have a new enough userspace to support this. Running old
- userspaces with this enabled will cause pain. Note that this causes
- the driver to bind to PCI devices, which precludes loading things
- like intelfb.
+ Choose this option if you want kernel modesetting enabled by default,
+ and you have a new enough userspace to support this. Running old
+ userspaces with this enabled will cause pain. Note that this causes
+ the driver to bind to PCI devices, which precludes loading things
+ like intelfb.
+endchoice
config DRM_MGA
tristate "Matrox g200/g400"
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SUNPLUS, USB_DEVICE_ID_SUNPLUS_WDESKTOP) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, 0x030c) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0002) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0003) },
{ HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0004) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_POWERCOM, USB_DEVICE_ID_POWERCOM_UPS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY1) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY2) },
- { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) },
- { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) },
- { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) },
- { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_8_8_4_IF_KIT) },
{ HID_USB_DEVICE(USB_VENDOR_ID_YEALINK, USB_DEVICE_ID_YEALINK_P1K_P4K_B2K) },
- { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
- { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
{ }
};
#define USB_VENDOR_ID_PLAYDOTCOM 0x0b43
#define USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII 0x0003
+#define USB_VENDOR_ID_POWERCOM 0x0d9f
+#define USB_DEVICE_ID_POWERCOM_UPS 0x0002
+
#define USB_VENDOR_ID_SAITEK 0x06a3
#define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17
default:
{
struct hid_device *hid = dev->hid;
- if (_IOC_TYPE(cmd) != 'H' || _IOC_DIR(cmd) != _IOC_READ)
- return -EINVAL;
+ if (_IOC_TYPE(cmd) != 'H' || _IOC_DIR(cmd) != _IOC_READ) {
+ ret = -EINVAL;
+ break;
+ }
if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWNAME(0))) {
int len;
len = strlen(hid->name) + 1;
if (len > _IOC_SIZE(cmd))
len = _IOC_SIZE(cmd);
- return copy_to_user(user_arg, hid->name, len) ?
+ ret = copy_to_user(user_arg, hid->name, len) ?
-EFAULT : len;
+ break;
}
if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWPHYS(0))) {
len = strlen(hid->phys) + 1;
if (len > _IOC_SIZE(cmd))
len = _IOC_SIZE(cmd);
- return copy_to_user(user_arg, hid->phys, len) ?
+ ret = copy_to_user(user_arg, hid->phys, len) ?
-EFAULT : len;
+ break;
}
}
- ret = -ENOTTY;
+ ret = -ENOTTY;
}
unlock_kernel();
return ret;
devid = superio_inw(sioaddr, SIO_REG_MANID);
if (devid != SIO_FINTEK_ID) {
- printk(KERN_INFO DRVNAME ": Not a Fintek device\n");
+ pr_debug(DRVNAME ": Not a Fintek device\n");
goto exit;
}
res.name = f71882fg_pdev->name;
err = acpi_check_resource_conflict(&res);
if (err)
- return err;
+ goto exit_device_put;
err = platform_device_add_resources(f71882fg_pdev, &res, 1);
if (err) {
}, \
.driver_data = &lis3lv02d_axis_##_axis \
}
+
+#define AXIS_DMI_MATCH2(_ident, _class1, _name1, \
+ _class2, _name2, \
+ _axis) { \
+ .ident = _ident, \
+ .callback = lis3lv02d_dmi_matched, \
+ .matches = { \
+ DMI_MATCH(DMI_##_class1, _name1), \
+ DMI_MATCH(DMI_##_class2, _name2), \
+ }, \
+ .driver_data = &lis3lv02d_axis_##_axis \
+}
static struct dmi_system_id lis3lv02d_dmi_ids[] = {
/* product names are truncated to match all kinds of a same model */
AXIS_DMI_MATCH("NC64x0", "HP Compaq nc64", x_inverted),
AXIS_DMI_MATCH("NC673x", "HP Compaq 673", xy_rotated_left_usd),
AXIS_DMI_MATCH("NC651xx", "HP Compaq 651", xy_rotated_right),
AXIS_DMI_MATCH("NC671xx", "HP Compaq 671", xy_swap_yz_inverted),
+ /* Intel-based HP Pavilion dv5 */
+ AXIS_DMI_MATCH2("HPDV5_I",
+ PRODUCT_NAME, "HP Pavilion dv5",
+ BOARD_NAME, "3603",
+ x_inverted),
+ /* AMD-based HP Pavilion dv5 */
+ AXIS_DMI_MATCH2("HPDV5_A",
+ PRODUCT_NAME, "HP Pavilion dv5",
+ BOARD_NAME, "3600",
+ y_inverted),
{ NULL, }
/* Laptop models without axis info (yet):
* "NC6910" "HP Compaq 6910"
.set_brightness = hpled_set,
};
+static acpi_status
+lis3lv02d_get_resource(struct acpi_resource *resource, void *context)
+{
+ if (resource->type == ACPI_RESOURCE_TYPE_EXTENDED_IRQ) {
+ struct acpi_resource_extended_irq *irq;
+ u32 *device_irq = context;
+
+ irq = &resource->data.extended_irq;
+ *device_irq = irq->interrupts[0];
+ }
+
+ return AE_OK;
+}
+
+static void lis3lv02d_enum_resources(struct acpi_device *device)
+{
+ acpi_status status;
+
+ status = acpi_walk_resources(device->handle, METHOD_NAME__CRS,
+ lis3lv02d_get_resource, &adev.irq);
+ if (ACPI_FAILURE(status))
+ printk(KERN_DEBUG DRIVER_NAME ": Error getting resources\n");
+}
+
+static s16 lis3lv02d_read_16(acpi_handle handle, int reg)
+{
+ u8 lo, hi;
+
+ adev.read(handle, reg - 1, &lo);
+ adev.read(handle, reg, &hi);
+ /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */
+ return (s16)((hi << 8) | lo);
+}
+
+static s16 lis3lv02d_read_8(acpi_handle handle, int reg)
+{
+ s8 lo;
+ adev.read(handle, reg, &lo);
+ return lo;
+}
+
static int lis3lv02d_add(struct acpi_device *device)
{
- u8 val;
int ret;
if (!device)
strcpy(acpi_device_class(device), ACPI_MDPS_CLASS);
device->driver_data = &adev;
- lis3lv02d_acpi_read(device->handle, WHO_AM_I, &val);
- if ((val != LIS3LV02DL_ID) && (val != LIS302DL_ID)) {
+ lis3lv02d_acpi_read(device->handle, WHO_AM_I, &adev.whoami);
+ switch (adev.whoami) {
+ case LIS_DOUBLE_ID:
+ printk(KERN_INFO DRIVER_NAME ": 2-byte sensor found\n");
+ adev.read_data = lis3lv02d_read_16;
+ adev.mdps_max_val = 2048;
+ break;
+ case LIS_SINGLE_ID:
+ printk(KERN_INFO DRIVER_NAME ": 1-byte sensor found\n");
+ adev.read_data = lis3lv02d_read_8;
+ adev.mdps_max_val = 128;
+ break;
+ default:
printk(KERN_ERR DRIVER_NAME
- ": Accelerometer chip not LIS3LV02D{L,Q}\n");
+ ": unknown sensor type 0x%X\n", adev.whoami);
+ return -EINVAL;
}
/* If possible use a "standard" axes order */
if (ret)
return ret;
+ /* obtain IRQ number of our device from ACPI */
+ lis3lv02d_enum_resources(adev.device);
+
ret = lis3lv02d_init_device(&adev);
if (ret) {
flush_work(&hpled_led.work);
*
* Copyright (C) 2007-2008 Yan Burman
* Copyright (C) 2008 Eric Piel
- * Copyright (C) 2008 Pavel Machek
+ * Copyright (C) 2008-2009 Pavel Machek
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <linux/poll.h>
#include <linux/freezer.h>
#include <linux/uaccess.h>
+#include <linux/miscdevice.h>
#include <acpi/acpi_drivers.h>
#include <asm/atomic.h>
#include "lis3lv02d.h"
* joystick.
*/
-/* Maximum value our axis may get for the input device (signed 12 bits) */
-#define MDPS_MAX_VAL 2048
+struct acpi_lis3lv02d adev = {
+ .misc_wait = __WAIT_QUEUE_HEAD_INITIALIZER(adev.misc_wait),
+};
-struct acpi_lis3lv02d adev;
EXPORT_SYMBOL_GPL(adev);
static int lis3lv02d_add_fs(struct acpi_device *device);
-static s16 lis3lv02d_read_16(acpi_handle handle, int reg)
-{
- u8 lo, hi;
-
- adev.read(handle, reg, &lo);
- adev.read(handle, reg + 1, &hi);
- /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */
- return (s16)((hi << 8) | lo);
-}
-
/**
* lis3lv02d_get_axis - For the given axis, give the value converted
* @axis: 1,2,3 - can also be negative
{
int position[3];
- position[0] = lis3lv02d_read_16(handle, OUTX_L);
- position[1] = lis3lv02d_read_16(handle, OUTY_L);
- position[2] = lis3lv02d_read_16(handle, OUTZ_L);
+ position[0] = adev.read_data(handle, OUTX);
+ position[1] = adev.read_data(handle, OUTY);
+ position[2] = adev.read_data(handle, OUTZ);
*x = lis3lv02d_get_axis(adev.ac.x, position);
*y = lis3lv02d_get_axis(adev.ac.y, position);
void lis3lv02d_poweroff(acpi_handle handle)
{
adev.is_on = 0;
- /* disable X,Y,Z axis and power down */
- adev.write(handle, CTRL_REG1, 0x00);
}
EXPORT_SYMBOL_GPL(lis3lv02d_poweroff);
void lis3lv02d_poweron(acpi_handle handle)
{
- u8 val;
-
adev.is_on = 1;
adev.init(handle);
- adev.write(handle, FF_WU_CFG, 0);
- /*
- * BDU: LSB and MSB values are not updated until both have been read.
- * So the value read will always be correct.
- * IEN: Interrupt for free-fall and DD, not for data-ready.
- */
- adev.read(handle, CTRL_REG2, &val);
- val |= CTRL2_BDU | CTRL2_IEN;
- adev.write(handle, CTRL_REG2, val);
}
EXPORT_SYMBOL_GPL(lis3lv02d_poweron);
mutex_unlock(&dev->lock);
}
+static irqreturn_t lis302dl_interrupt(int irq, void *dummy)
+{
+ /*
+ * Be careful: on some HP laptops the bios force DD when on battery and
+ * the lid is closed. This leads to interrupts as soon as a little move
+ * is done.
+ */
+ atomic_inc(&adev.count);
+
+ wake_up_interruptible(&adev.misc_wait);
+ kill_fasync(&adev.async_queue, SIGIO, POLL_IN);
+ return IRQ_HANDLED;
+}
+
+static int lis3lv02d_misc_open(struct inode *inode, struct file *file)
+{
+ int ret;
+
+ if (test_and_set_bit(0, &adev.misc_opened))
+ return -EBUSY; /* already open */
+
+ atomic_set(&adev.count, 0);
+
+ /*
+ * The sensor can generate interrupts for free-fall and direction
+ * detection (distinguishable with FF_WU_SRC and DD_SRC) but to keep
+ * the things simple and _fast_ we activate it only for free-fall, so
+ * no need to read register (very slow with ACPI). For the same reason,
+ * we forbid shared interrupts.
+ *
+ * IRQF_TRIGGER_RISING seems pointless on HP laptops because the
+ * io-apic is not configurable (and generates a warning) but I keep it
+ * in case of support for other hardware.
+ */
+ ret = request_irq(adev.irq, lis302dl_interrupt, IRQF_TRIGGER_RISING,
+ DRIVER_NAME, &adev);
+
+ if (ret) {
+ clear_bit(0, &adev.misc_opened);
+ printk(KERN_ERR DRIVER_NAME ": IRQ%d allocation failed\n", adev.irq);
+ return -EBUSY;
+ }
+ lis3lv02d_increase_use(&adev);
+ printk("lis3: registered interrupt %d\n", adev.irq);
+ return 0;
+}
+
+static int lis3lv02d_misc_release(struct inode *inode, struct file *file)
+{
+ fasync_helper(-1, file, 0, &adev.async_queue);
+ lis3lv02d_decrease_use(&adev);
+ free_irq(adev.irq, &adev);
+ clear_bit(0, &adev.misc_opened); /* release the device */
+ return 0;
+}
+
+static ssize_t lis3lv02d_misc_read(struct file *file, char __user *buf,
+ size_t count, loff_t *pos)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ u32 data;
+ unsigned char byte_data;
+ ssize_t retval = 1;
+
+ if (count < 1)
+ return -EINVAL;
+
+ add_wait_queue(&adev.misc_wait, &wait);
+ while (true) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ data = atomic_xchg(&adev.count, 0);
+ if (data)
+ break;
+
+ if (file->f_flags & O_NONBLOCK) {
+ retval = -EAGAIN;
+ goto out;
+ }
+
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ goto out;
+ }
+
+ schedule();
+ }
+
+ if (data < 255)
+ byte_data = data;
+ else
+ byte_data = 255;
+
+ /* make sure we are not going into copy_to_user() with
+ * TASK_INTERRUPTIBLE state */
+ set_current_state(TASK_RUNNING);
+ if (copy_to_user(buf, &byte_data, sizeof(byte_data)))
+ retval = -EFAULT;
+
+out:
+ __set_current_state(TASK_RUNNING);
+ remove_wait_queue(&adev.misc_wait, &wait);
+
+ return retval;
+}
+
+static unsigned int lis3lv02d_misc_poll(struct file *file, poll_table *wait)
+{
+ poll_wait(file, &adev.misc_wait, wait);
+ if (atomic_read(&adev.count))
+ return POLLIN | POLLRDNORM;
+ return 0;
+}
+
+static int lis3lv02d_misc_fasync(int fd, struct file *file, int on)
+{
+ return fasync_helper(fd, file, on, &adev.async_queue);
+}
+
+static const struct file_operations lis3lv02d_misc_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .read = lis3lv02d_misc_read,
+ .open = lis3lv02d_misc_open,
+ .release = lis3lv02d_misc_release,
+ .poll = lis3lv02d_misc_poll,
+ .fasync = lis3lv02d_misc_fasync,
+};
+
+static struct miscdevice lis3lv02d_misc_device = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "freefall",
+ .fops = &lis3lv02d_misc_fops,
+};
+
/**
* lis3lv02d_joystick_kthread - Kthread polling function
* @data: unused - here to conform to threadfn prototype
lis3lv02d_decrease_use(&adev);
}
-
static inline void lis3lv02d_calibrate_joystick(void)
{
lis3lv02d_get_xyz(adev.device->handle, &adev.xcalib, &adev.ycalib, &adev.zcalib);
adev.idev->close = lis3lv02d_joystick_close;
set_bit(EV_ABS, adev.idev->evbit);
- input_set_abs_params(adev.idev, ABS_X, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
- input_set_abs_params(adev.idev, ABS_Y, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
- input_set_abs_params(adev.idev, ABS_Z, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3);
+ input_set_abs_params(adev.idev, ABS_X, -adev.mdps_max_val, adev.mdps_max_val, 3, 3);
+ input_set_abs_params(adev.idev, ABS_Y, -adev.mdps_max_val, adev.mdps_max_val, 3, 3);
+ input_set_abs_params(adev.idev, ABS_Z, -adev.mdps_max_val, adev.mdps_max_val, 3, 3);
err = input_register_device(adev.idev);
if (err) {
if (!adev.idev)
return;
+ misc_deregister(&lis3lv02d_misc_device);
input_unregister_device(adev.idev);
adev.idev = NULL;
}
if (lis3lv02d_joystick_enable())
printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n");
+ printk("lis3_init_device: irq %d\n", dev->irq);
+
+ /* if we did not get an IRQ from ACPI - we have nothing more to do */
+ if (!dev->irq) {
+ printk(KERN_ERR DRIVER_NAME
+ ": No IRQ in ACPI. Disabling /dev/freefall\n");
+ goto out;
+ }
+
+ printk("lis3: registering device\n");
+ if (misc_register(&lis3lv02d_misc_device))
+ printk(KERN_ERR DRIVER_NAME ": misc_register failed\n");
+out:
lis3lv02d_decrease_use(dev);
return 0;
}
EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs);
MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver");
-MODULE_AUTHOR("Yan Burman and Eric Piel");
+MODULE_AUTHOR("Yan Burman, Eric Piel, Pavel Machek");
MODULE_LICENSE("GPL");
/*
* The actual chip is STMicroelectronics LIS3LV02DL or LIS3LV02DQ that seems to
* be connected via SPI. There exists also several similar chips (such as LIS302DL or
- * LIS3L02DQ) but not in the HP laptops and they have slightly different registers.
+ * LIS3L02DQ) and they have slightly different registers, but we can provide a
+ * common interface for all of them.
* They can also be connected via I²C.
*/
-#define LIS3LV02DL_ID 0x3A /* Also the LIS3LV02DQ */
-#define LIS302DL_ID 0x3B /* Also the LIS202DL! */
+/* 2-byte registers */
+#define LIS_DOUBLE_ID 0x3A /* LIS3LV02D[LQ] */
+/* 1-byte registers */
+#define LIS_SINGLE_ID 0x3B /* LIS[32]02DL and others */
enum lis3lv02d_reg {
WHO_AM_I = 0x0F,
STATUS_REG = 0x27,
OUTX_L = 0x28,
OUTX_H = 0x29,
+ OUTX = 0x29,
OUTY_L = 0x2A,
OUTY_H = 0x2B,
+ OUTY = 0x2B,
OUTZ_L = 0x2C,
OUTZ_H = 0x2D,
+ OUTZ = 0x2D,
FF_WU_CFG = 0x30,
FF_WU_SRC = 0x31,
FF_WU_ACK = 0x32,
acpi_status (*write) (acpi_handle handle, int reg, u8 val);
acpi_status (*read) (acpi_handle handle, int reg, u8 *ret);
+ u8 whoami; /* 3Ah: 2-byte registries, 3Bh: 1-byte registries */
+ s16 (*read_data) (acpi_handle handle, int reg);
+ int mdps_max_val;
+
struct input_dev *idev; /* input device */
struct task_struct *kthread; /* kthread for input */
struct mutex lock;
unsigned char is_on; /* whether the device is on or off */
unsigned char usage; /* usage counter */
struct axis_conversion ac; /* hw -> logical axis */
+
+ u32 irq; /* IRQ number */
+ struct fasync_struct *async_queue; /* queue for the misc device */
+ wait_queue_head_t misc_wait; /* Wait queue for the misc device */
+ unsigned long misc_opened; /* bit0: whether the device is open */
};
int lis3lv02d_init_device(struct acpi_lis3lv02d *dev);
res.name = pdev->name;
err = acpi_check_resource_conflict(&res);
if (err)
- goto EXIT;
+ goto EXIT_DEV_PUT;
err = platform_device_add_resources(pdev, &res, 1);
if (err) {
err = acpi_check_resource_conflict(&res);
if (err)
- goto exit;
+ goto exit_device_put;
err = platform_device_add_resources(pdev, &res, 1);
if (err) {
u8 *config, u8 *cb)
{
struct tuner_simple_priv *priv = fe->tuner_priv;
- u8 tuneraddr;
int rc;
/* tv norm specific stuff for multi-norm tuners */
case TUNER_PHILIPS_TUV1236D:
{
+ struct tuner_i2c_props i2c = priv->i2c_props;
/* 0x40 -> ATSC antenna input 1 */
/* 0x48 -> ATSC antenna input 2 */
/* 0x00 -> NTSC antenna input 1 */
buffer[1] = 0x04;
}
/* set to the correct mode (analog or digital) */
- tuneraddr = priv->i2c_props.addr;
- priv->i2c_props.addr = 0x0a;
- rc = tuner_i2c_xfer_send(&priv->i2c_props, &buffer[0], 2);
+ i2c.addr = 0x0a;
+ rc = tuner_i2c_xfer_send(&i2c, &buffer[0], 2);
if (2 != rc)
tuner_warn("i2c i/o error: rc == %d "
"(should be 2)\n", rc);
- rc = tuner_i2c_xfer_send(&priv->i2c_props, &buffer[2], 2);
+ rc = tuner_i2c_xfer_send(&i2c, &buffer[2], 2);
if (2 != rc)
tuner_warn("i2c i/o error: rc == %d "
"(should be 2)\n", rc);
- priv->i2c_props.addr = tuneraddr;
break;
}
}
enum dmx_success success)
{
struct dmxdev_filter *dmxdevfilter = filter->priv;
- unsigned long flags;
int ret;
if (dmxdevfilter->buffer.error) {
wake_up(&dmxdevfilter->buffer.queue);
return 0;
}
- spin_lock_irqsave(&dmxdevfilter->dev->lock, flags);
+ spin_lock(&dmxdevfilter->dev->lock);
if (dmxdevfilter->state != DMXDEV_STATE_GO) {
- spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+ spin_unlock(&dmxdevfilter->dev->lock);
return 0;
}
del_timer(&dmxdevfilter->timer);
}
if (dmxdevfilter->params.sec.flags & DMX_ONESHOT)
dmxdevfilter->state = DMXDEV_STATE_DONE;
- spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+ spin_unlock(&dmxdevfilter->dev->lock);
wake_up(&dmxdevfilter->buffer.queue);
return 0;
}
{
struct dmxdev_filter *dmxdevfilter = feed->priv;
struct dvb_ringbuffer *buffer;
- unsigned long flags;
int ret;
- spin_lock_irqsave(&dmxdevfilter->dev->lock, flags);
+ spin_lock(&dmxdevfilter->dev->lock);
if (dmxdevfilter->params.pes.output == DMX_OUT_DECODER) {
- spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+ spin_unlock(&dmxdevfilter->dev->lock);
return 0;
}
else
buffer = &dmxdevfilter->dev->dvr_buffer;
if (buffer->error) {
- spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+ spin_unlock(&dmxdevfilter->dev->lock);
wake_up(&buffer->queue);
return 0;
}
dvb_ringbuffer_flush(buffer);
buffer->error = ret;
}
- spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags);
+ spin_unlock(&dmxdevfilter->dev->lock);
wake_up(&buffer->queue);
return 0;
}
void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf,
size_t count)
{
- unsigned long flags;
-
- spin_lock_irqsave(&demux->lock, flags);
+ spin_lock(&demux->lock);
while (count--) {
if (buf[0] == 0x47)
buf += 188;
}
- spin_unlock_irqrestore(&demux->lock, flags);
+ spin_unlock(&demux->lock);
}
EXPORT_SYMBOL(dvb_dmx_swfilter_packets);
void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count)
{
- unsigned long flags;
int p = 0, i, j;
- spin_lock_irqsave(&demux->lock, flags);
+ spin_lock(&demux->lock);
if (demux->tsbufp) {
i = demux->tsbufp;
}
bailout:
- spin_unlock_irqrestore(&demux->lock, flags);
+ spin_unlock(&demux->lock);
}
EXPORT_SYMBOL(dvb_dmx_swfilter);
void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count)
{
- unsigned long flags;
int p = 0, i, j;
u8 tmppack[188];
- spin_lock_irqsave(&demux->lock, flags);
+ spin_lock(&demux->lock);
if (demux->tsbufp) {
i = demux->tsbufp;
}
bailout:
- spin_unlock_irqrestore(&demux->lock, flags);
+ spin_unlock(&demux->lock);
}
EXPORT_SYMBOL(dvb_dmx_swfilter_204);
* - blacklisted KWorld radio in hid-core.c and hid-ids.h
* 2008-12-03 Mark Lord <mlord@pobox.com>
* - add support for DealExtreme USB Radio
+ * 2009-01-31 Bob Ross <pigiron@gmx.com>
+ * - correction of stereo detection/setting
+ * - correction of signal strength indicator scaling
+ * 2009-01-31 Rick Bronson <rick@efn.org>
+ * Tobias Lorenz <tobias.lorenz@gmx.net>
+ * - add LED status output
*
* ToDo:
* - add firmware download/update support
* - RDS support: interrupt mode, instead of polling
- * - add LED status output (check if that's not already done in firmware)
*/
+/**************************************************************************
+ * General Driver Functions - LED_REPORT
+ **************************************************************************/
+
+/*
+ * si470x_set_led_state - sets the led state
+ */
+static int si470x_set_led_state(struct si470x_device *radio,
+ unsigned char led_state)
+{
+ unsigned char buf[LED_REPORT_SIZE];
+ int retval;
+
+ buf[0] = LED_REPORT;
+ buf[1] = LED_COMMAND;
+ buf[2] = led_state;
+
+ retval = si470x_set_report(radio, (void *) &buf, sizeof(buf));
+
+ return (retval < 0) ? -EINVAL : 0;
+}
+
+
+
/**************************************************************************
* RDS Driver Functions
**************************************************************************/
};
/* stereo indicator == stereo (instead of mono) */
- if ((radio->registers[STATUSRSSI] & STATUSRSSI_ST) == 1)
- tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
- else
+ if ((radio->registers[STATUSRSSI] & STATUSRSSI_ST) == 0)
tuner->rxsubchans = V4L2_TUNER_SUB_MONO;
+ else
+ tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
/* mono/stereo selector */
- if ((radio->registers[POWERCFG] & POWERCFG_MONO) == 1)
- tuner->audmode = V4L2_TUNER_MODE_MONO;
- else
+ if ((radio->registers[POWERCFG] & POWERCFG_MONO) == 0)
tuner->audmode = V4L2_TUNER_MODE_STEREO;
+ else
+ tuner->audmode = V4L2_TUNER_MODE_MONO;
/* min is worst, max is best; signal:0..0xffff; rssi: 0..0xff */
- tuner->signal = (radio->registers[STATUSRSSI] & STATUSRSSI_RSSI)
- * 0x0101;
+ /* measured in units of dbµV in 1 db increments (max at ~75 dbµV) */
+ tuner->signal = (radio->registers[STATUSRSSI] & STATUSRSSI_RSSI);
+ /* the ideal factor is 0xffff/75 = 873,8 */
+ tuner->signal = (tuner->signal * 873) + (8 * tuner->signal / 10);
/* automatic frequency control: -1: freq to low, 1 freq to high */
/* AFCRL does only indicate that freq. differs, not if too low/high */
/* set initial frequency */
si470x_set_freq(radio, 87.5 * FREQ_MUL); /* available in all regions */
+ /* set led to connect state */
+ si470x_set_led_state(radio, BLINK_GREEN_LED);
+
/* rds buffer allocation */
radio->buf_size = rds_buf * 3;
radio->buffer = kmalloc(radio->buf_size, GFP_KERNEL);
cancel_delayed_work_sync(&radio->work);
usb_set_intfdata(intf, NULL);
if (radio->users == 0) {
+ /* set led to disconnect state */
+ si470x_set_led_state(radio, BLINK_ORANGE_LED);
+
video_unregister_device(radio->videodev);
kfree(radio->buffer);
kfree(radio);
if (urb == NULL)
break;
+ BUG_ON(!gspca_dev->dev);
gspca_dev->urb[i] = NULL;
if (!gspca_dev->present)
usb_kill_urb(urb);
{
struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
+ mutex_lock(&gspca_dev->usb_lock);
gspca_dev->present = 0;
+ mutex_unlock(&gspca_dev->usb_lock);
+ destroy_urbs(gspca_dev);
+ gspca_dev->dev = NULL;
usb_set_intfdata(intf, NULL);
/* release the device */
return 0;
}
- v4l2_subdev_call(itv->sd_video, video, s_fmt, fmt);
+ v4l2_subdev_call(itv->sd_video, video, g_fmt, fmt);
vbifmt->service_set = ivtv_get_service_set(vbifmt);
return 0;
}
break;
}
+ case IVTV_IOC_DMA_FRAME:
+ case VIDEO_GET_PTS:
+ case VIDEO_GET_FRAME_COUNT:
+ case VIDEO_GET_EVENT:
+ case VIDEO_PLAY:
+ case VIDEO_STOP:
+ case VIDEO_FREEZE:
+ case VIDEO_CONTINUE:
+ case VIDEO_COMMAND:
+ case VIDEO_TRY_COMMAND:
+ return ivtv_decoder_ioctls(file, cmd, (void *)arg);
+
default:
return -EINVAL;
}
ivtv_vapi(itv, CX2341X_DEC_SET_AUDIO_MODE, 2, itv->audio_bilingual_mode, itv->audio_stereo_mode);
return 0;
- case IVTV_IOC_DMA_FRAME:
- case VIDEO_GET_PTS:
- case VIDEO_GET_FRAME_COUNT:
- case VIDEO_GET_EVENT:
- case VIDEO_PLAY:
- case VIDEO_STOP:
- case VIDEO_FREEZE:
- case VIDEO_CONTINUE:
- case VIDEO_COMMAND:
- case VIDEO_TRY_COMMAND:
- return ivtv_decoder_ioctls(filp, cmd, (void *)arg);
-
default:
break;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
goto fail;
- ei->base_addr = ioremap_nocache(res->start, res->end - res->start);
+ ei->base_addr = ioremap_nocache(res->start, resource_size(res));
if (!ei->base_addr)
goto fail;
pr_debug("EGPIO phys=%08x virt=%p\n", (u32)res->start, ei->base_addr);
ei->nchips = pdata->num_chips;
ei->chip = kzalloc(sizeof(struct egpio_chip) * ei->nchips, GFP_KERNEL);
- if (!ei) {
+ if (!ei->chip) {
ret = -ENOMEM;
goto fail;
}
static struct i2c_device_id pcf50633_id_table[] = {
{"pcf50633", 0x73},
+ {/* end of list */}
};
static struct i2c_driver pcf50633_driver = {
return gpiochip_add(gchip);
}
-static int sm501_register_gpio(struct sm501_devdata *sm)
+static int __devinit sm501_register_gpio(struct sm501_devdata *sm)
{
struct sm501_gpio *gpio = &sm->gpio;
resource_size_t iobase = sm->io_res->start + SM501_GPIO;
* Common init code for an SM501
*/
-static int sm501_init_dev(struct sm501_devdata *sm)
+static int __devinit sm501_init_dev(struct sm501_devdata *sm)
{
struct sm501_initdata *idata;
struct sm501_platdata *pdata;
return 0;
}
-static int sm501_plat_probe(struct platform_device *dev)
+static int __devinit sm501_plat_probe(struct platform_device *dev)
{
struct sm501_devdata *sm;
int ret;
.gpio_base = -1,
};
-static int sm501_pci_probe(struct pci_dev *dev,
- const struct pci_device_id *id)
+static int __devinit sm501_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
{
struct sm501_devdata *sm;
int err;
sm501_gpio_remove(sm);
}
-static void sm501_pci_remove(struct pci_dev *dev)
+static void __devexit sm501_pci_remove(struct pci_dev *dev)
{
struct sm501_devdata *sm = pci_get_drvdata(dev);
MODULE_DEVICE_TABLE(pci, sm501_pci_tbl);
-static struct pci_driver sm501_pci_drv = {
+static struct pci_driver sm501_pci_driver = {
.name = "sm501",
.id_table = sm501_pci_tbl,
.probe = sm501_pci_probe,
- .remove = sm501_pci_remove,
+ .remove = __devexit_p(sm501_pci_remove),
};
MODULE_ALIAS("platform:sm501");
-static struct platform_driver sm501_plat_drv = {
+static struct platform_driver sm501_plat_driver = {
.driver = {
.name = "sm501",
.owner = THIS_MODULE,
static int __init sm501_base_init(void)
{
- platform_driver_register(&sm501_plat_drv);
- return pci_register_driver(&sm501_pci_drv);
+ platform_driver_register(&sm501_plat_driver);
+ return pci_register_driver(&sm501_pci_driver);
}
static void __exit sm501_base_exit(void)
{
- platform_driver_unregister(&sm501_plat_drv);
- pci_unregister_driver(&sm501_pci_drv);
+ platform_driver_unregister(&sm501_plat_driver);
+ pci_unregister_driver(&sm501_pci_driver);
}
module_init(sm501_base_init);
#include <linux/i2c.h>
#include <linux/i2c/twl4030.h>
-#ifdef CONFIG_ARM
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
#include <mach/cpu.h>
#endif
do {
schedule_timeout_interruptible(1);
reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
- } while (tries-- && (reg & WM8350_AUXADC_POLL));
+ } while (--tries && (reg & WM8350_AUXADC_POLL));
if (!tries)
dev_err(wm8350->dev, "adc chn %d read timeout\n", channel);
int wm8350_device_init(struct wm8350 *wm8350, int irq,
struct wm8350_platform_data *pdata)
{
- int ret = -EINVAL;
+ int ret;
u16 id1, id2, mask_rev;
u16 cust_id, mode, chip_rev;
/* get WM8350 revision and config mode */
- wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1);
- wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2);
- wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev), &mask_rev);
+ ret = wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1);
+ if (ret != 0) {
+ dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
+ goto err;
+ }
+
+ ret = wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2);
+ if (ret != 0) {
+ dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
+ goto err;
+ }
+
+ ret = wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev),
+ &mask_rev);
+ if (ret != 0) {
+ dev_err(wm8350->dev, "Failed to read revision: %d\n", ret);
+ goto err;
+ }
id1 = be16_to_cpu(id1);
id2 = be16_to_cpu(id2);
return ret;
}
- if (pdata && pdata->init) {
- ret = pdata->init(wm8350);
- if (ret != 0) {
- dev_err(wm8350->dev, "Platform init() failed: %d\n",
- ret);
- goto err;
- }
- }
+ wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0xFFFF);
+ wm8350_reg_write(wm8350, WM8350_INT_STATUS_1_MASK, 0xFFFF);
+ wm8350_reg_write(wm8350, WM8350_INT_STATUS_2_MASK, 0xFFFF);
+ wm8350_reg_write(wm8350, WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, 0xFFFF);
+ wm8350_reg_write(wm8350, WM8350_GPIO_INT_STATUS_MASK, 0xFFFF);
+ wm8350_reg_write(wm8350, WM8350_COMPARATOR_INT_STATUS_MASK, 0xFFFF);
mutex_init(&wm8350->auxadc_mutex);
mutex_init(&wm8350->irq_mutex);
}
wm8350->chip_irq = irq;
+ if (pdata && pdata->init) {
+ ret = pdata->init(wm8350);
+ if (ret != 0) {
+ dev_err(wm8350->dev, "Platform init() failed: %d\n",
+ ret);
+ goto err;
+ }
+ }
+
wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0x0);
wm8350_client_dev_register(wm8350, "wm8350-codec",
{ 0x7CFF, 0x0C00, 0x7FFF }, /* R1 - ID */
{ 0x0000, 0x0000, 0x0000 }, /* R2 */
{ 0xBE3B, 0xBE3B, 0x8000 }, /* R3 - System Control 1 */
- { 0xFCF7, 0xFCF7, 0xF800 }, /* R4 - System Control 2 */
+ { 0xFEF7, 0xFEF7, 0xF800 }, /* R4 - System Control 2 */
{ 0x80FF, 0x80FF, 0x8000 }, /* R5 - System Hibernate */
{ 0xFB0E, 0xFB0E, 0x0000 }, /* R6 - Interface Control */
{ 0x0000, 0x0000, 0x0000 }, /* R7 */
{
struct dw_dma_slave *dws = slave;
- if (dws->dma_dev == chan->device->dev)
+ if (dws->dma_dev == chan->device->dev) {
+ chan->private = dws;
return true;
- else
+ } else
return false;
}
#endif
/* global iommu list, set NULL for ignored DMAR units */
static struct intel_iommu **g_iommus;
+static int rwbf_quirk;
+
/*
* 0: Present
* 1-11: Reserved
u32 val;
unsigned long flag;
- if (!cap_rwbf(iommu->cap))
+ if (!rwbf_quirk && !cap_rwbf(iommu->cap))
return;
val = iommu->gcmd | DMA_GCMD_WBF;
.unmap = intel_iommu_unmap_range,
.iova_to_phys = intel_iommu_iova_to_phys,
};
+
+static void __devinit quirk_iommu_rwbf(struct pci_dev *dev)
+{
+ /*
+ * Mobile 4 Series Chipset neglects to set RWBF capability,
+ * but needs it:
+ */
+ printk(KERN_INFO "DMAR: Forcing write-buffer flush capability\n");
+ rwbf_quirk = 1;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf);
}
}
-/*
- * Essentially, this is ((1 << (1 << x)) - 1), but without the
- * undefinedness of a << 32.
- */
static inline __attribute_const__ u32 msi_mask(unsigned x)
{
- static const u32 mask[] = { 1, 2, 4, 0xf, 0xff, 0xffff, 0xffffffff };
- return mask[x];
+ /* Don't shift by >= width of type */
+ if (x >= 5)
+ return 0xffffffff;
+ return (1 << (1 << x)) - 1;
}
static void msix_flush_writes(struct irq_desc *desc)
}
/**
- * pci_request_region - Reserved PCI I/O and memory resource
+ * __pci_request_region - Reserved PCI I/O and memory resource
* @pdev: PCI device whose resources are to be reserved
* @bar: BAR to be reserved
* @res_name: Name to be associated with resource.
+ * @exclusive: whether the region access is exclusive or not
*
* Mark the PCI region associated with PCI device @pdev BR @bar as
* being reserved by owner @res_name. Do not access any
* address inside the PCI regions unless this call returns
* successfully.
*
+ * If @exclusive is set, then the region is marked so that userspace
+ * is explicitly not allowed to map the resource via /dev/mem or
+ * sysfs MMIO access.
+ *
* Returns 0 on success, or %EBUSY on error. A warning
* message is also printed on failure.
*/
}
/**
- * pci_request_region - Reserved PCI I/O and memory resource
+ * pci_request_region - Reserve PCI I/O and memory resource
* @pdev: PCI device whose resources are to be reserved
* @bar: BAR to be reserved
- * @res_name: Name to be associated with resource.
+ * @res_name: Name to be associated with resource
*
- * Mark the PCI region associated with PCI device @pdev BR @bar as
+ * Mark the PCI region associated with PCI device @pdev BAR @bar as
* being reserved by owner @res_name. Do not access any
* address inside the PCI regions unless this call returns
* successfully.
#endif
/**
- * Firmware PM callbacks
+ * struct pci_platform_pm_ops - Firmware PM callbacks
*
- * @is_manageable - returns 'true' if given device is power manageable by the
- * platform firmware
+ * @is_manageable: returns 'true' if given device is power manageable by the
+ * platform firmware
*
- * @set_state - invokes the platform firmware to set the device's power state
+ * @set_state: invokes the platform firmware to set the device's power state
*
- * @choose_state - returns PCI power state of given device preferred by the
- * platform; to be used during system-wide transitions from a
- * sleeping state to the working state and vice versa
+ * @choose_state: returns PCI power state of given device preferred by the
+ * platform; to be used during system-wide transitions from a
+ * sleeping state to the working state and vice versa
*
- * @can_wakeup - returns 'true' if given device is capable of waking up the
- * system from a sleeping state
+ * @can_wakeup: returns 'true' if given device is capable of waking up the
+ * system from a sleeping state
*
- * @sleep_wake - enables/disables the system wake up capability of given device
+ * @sleep_wake: enables/disables the system wake up capability of given device
*
* If given platform is generally capable of power managing PCI devices, all of
* these callbacks are mandatory.
/**
* pci_get_rom_size - obtain the actual size of the ROM image
+ * @pdev: target PCI device
* @rom: kernel virtual pointer to image of ROM
* @size: size of PCI window
* return: size of actual ROM image
depends on EXPERIMENTAL
depends on BACKLIGHT_CLASS_DEVICE
depends on RFKILL
+ depends on POWER_SUPPLY
default n
---help---
This driver adds support for rfkill and backlight control to Dell
config EEEPC_LAPTOP
tristate "Eee PC Hotkey Driver (EXPERIMENTAL)"
depends on ACPI
+ depends on INPUT
depends on EXPERIMENTAL
select BACKLIGHT_CLASS_DEVICE
select HWMON
}
}
+ /* Save current CSR for comparison in atmel_tasklet_func() */
+ atmel_port->irq_status_prev = UART_GET_CSR(port);
+ atmel_port->irq_status = atmel_port->irq_status_prev;
+
/*
* Finally, enable the serial port
*/
brd->pci_dev = pdev;
if (pdev->device == PCIE_DEVICE_ID_NEO_4_IBM)
brd->maxports = 4;
+ else if (pdev->device == PCI_DEVICE_ID_DIGI_NEO_8)
+ brd->maxports = 8;
else
brd->maxports = 2;
{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45), 0, 0, 2 },
{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45PRI), 0, 0, 3 },
{ PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_4_IBM), 0, 0, 4 },
+ { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_NEO_8), 0, 0, 5 },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, jsm_pci_tbl);
static inline int getmiso(const struct spi_device *spi)
{
- return gpio_get_value(SPI_MISO_GPIO);
+ return !!gpio_get_value(SPI_MISO_GPIO);
}
#undef pdata
}
EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
-/**
- * usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled
- * @dev: USB Host Controller being resumed
- *
- * Store this function in the HCD's struct pci_driver as .resume_early.
- */
-int usb_hcd_pci_resume_early(struct pci_dev *dev)
-{
- pci_restore_state(dev);
- return 0;
-}
-EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early);
-
/**
* usb_hcd_pci_resume - power management resume of a PCI-based HCD
* @dev: USB Host Controller being resumed
}
#endif
+ pci_restore_state(dev);
+
hcd = pci_get_drvdata(dev);
if (hcd->state != HC_STATE_SUSPENDED) {
dev_dbg(hcd->self.controller,
#ifdef CONFIG_PM
extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg);
-extern int usb_hcd_pci_resume_early(struct pci_dev *dev);
extern int usb_hcd_pci_resume(struct pci_dev *dev);
#endif /* CONFIG_PM */
#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
- .resume_early = usb_hcd_pci_resume_early,
.resume = usb_hcd_pci_resume,
#endif
.shutdown = usb_hcd_pci_shutdown,
#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
- .resume_early = usb_hcd_pci_resume_early,
.resume = usb_hcd_pci_resume,
#endif
#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
- .resume_early = usb_hcd_pci_resume_early,
.resume = usb_hcd_pci_resume,
#endif /* PM */
};
* Now that the ASL is updated, complete the removal of any
* removed qsets.
*/
- spin_lock(&whc->lock);
+ spin_lock_irq(&whc->lock);
list_for_each_entry_safe(qset, t, &whc->async_removed_list, list_node) {
qset_remove_complete(whc, qset);
}
- spin_unlock(&whc->lock);
+ spin_unlock_irq(&whc->lock);
}
/**
* Now that the PZL is updated, complete the removal of any
* removed qsets.
*/
- spin_lock(&whc->lock);
+ spin_lock_irq(&whc->lock);
list_for_each_entry_safe(qset, t, &whc->periodic_removed_list, list_node) {
qset_remove_complete(whc, qset);
}
- spin_unlock(&whc->lock);
+ spin_unlock_irq(&whc->lock);
}
/**
config FB_I810
tristate "Intel 810/815 support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && PCI && X86_32
- select AGP
- select AGP_INTEL
- select FB
+ depends on EXPERIMENTAL && FB && PCI && X86_32 && AGP_INTEL
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
config FB_INTEL
tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && PCI && X86
- select FB
- select AGP
- select AGP_INTEL
+ depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
---help---
Hardware driver for the intel TCO timer based watchdog devices.
These drivers are included in the Intel 82801 I/O Controller
- Hub family (from ICH0 up to ICH8) and in the Intel 6300ESB
+ Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB
controller hub.
The TCO (Total Cost of Ownership) timer is a watchdog timer
/*
* intel TCO vendor specific watchdog driver support
*
- * (c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>.
+ * (c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
/* Module and version information */
#define DRV_NAME "iTCO_vendor_support"
-#define DRV_VERSION "1.02"
+#define DRV_VERSION "1.03"
#define PFX DRV_NAME ": "
/* Includes */
* 20.6 seconds.
*/
+static void supermicro_old_pre_start(unsigned long acpibase)
+{
+ unsigned long val32;
+
+ /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
+ val32 = inl(SMI_EN);
+ val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */
+ outl(val32, SMI_EN); /* Needed to activate watchdog */
+}
+
+static void supermicro_old_pre_stop(unsigned long acpibase)
+{
+ unsigned long val32;
+
+ /* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */
+ val32 = inl(SMI_EN);
+ val32 |= 0x00002000; /* Turn on SMI clearing watchdog */
+ outl(val32, SMI_EN); /* Needed to deactivate watchdog */
+}
+
static void supermicro_old_pre_keepalive(unsigned long acpibase)
{
/* Reload TCO Timer (done in iTCO_wdt_keepalive) + */
void iTCO_vendor_pre_start(unsigned long acpibase,
unsigned int heartbeat)
{
- if (vendorsupport == SUPERMICRO_NEW_BOARD)
+ if (vendorsupport == SUPERMICRO_OLD_BOARD)
+ supermicro_old_pre_start(acpibase);
+ else if (vendorsupport == SUPERMICRO_NEW_BOARD)
supermicro_new_pre_start(heartbeat);
}
EXPORT_SYMBOL(iTCO_vendor_pre_start);
void iTCO_vendor_pre_stop(unsigned long acpibase)
{
- if (vendorsupport == SUPERMICRO_NEW_BOARD)
+ if (vendorsupport == SUPERMICRO_OLD_BOARD)
+ supermicro_old_pre_stop(acpibase);
+ else if (vendorsupport == SUPERMICRO_NEW_BOARD)
supermicro_new_pre_stop();
}
EXPORT_SYMBOL(iTCO_vendor_pre_stop);
/*
- * intel TCO Watchdog Driver (Used in i82801 and i6300ESB chipsets)
+ * intel TCO Watchdog Driver (Used in i82801 and i63xxESB chipsets)
*
- * (c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>.
+ * (c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
/* Module and version information */
#define DRV_NAME "iTCO_wdt"
-#define DRV_VERSION "1.04"
+#define DRV_VERSION "1.05"
#define PFX DRV_NAME ": "
/* Includes */
/* Address definitions for the TCO */
/* TCO base address */
-#define TCOBASE iTCO_wdt_private.ACPIBASE + 0x60
+#define TCOBASE iTCO_wdt_private.ACPIBASE + 0x60
/* SMI Control and Enable Register */
-#define SMI_EN iTCO_wdt_private.ACPIBASE + 0x30
+#define SMI_EN iTCO_wdt_private.ACPIBASE + 0x30
#define TCO_RLD TCOBASE + 0x00 /* TCO Timer Reload and Curr. Value */
#define TCOv1_TMR TCOBASE + 0x01 /* TCOv1 Timer Initial Value */
-#define TCO_DAT_IN TCOBASE + 0x02 /* TCO Data In Register */
-#define TCO_DAT_OUT TCOBASE + 0x03 /* TCO Data Out Register */
-#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */
-#define TCO2_STS TCOBASE + 0x06 /* TCO2 Status Register */
+#define TCO_DAT_IN TCOBASE + 0x02 /* TCO Data In Register */
+#define TCO_DAT_OUT TCOBASE + 0x03 /* TCO Data Out Register */
+#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */
+#define TCO2_STS TCOBASE + 0x06 /* TCO2 Status Register */
#define TCO1_CNT TCOBASE + 0x08 /* TCO1 Control Register */
#define TCO2_CNT TCOBASE + 0x0a /* TCO2 Control Register */
#define TCOv2_TMR TCOBASE + 0x12 /* TCOv2 Timer Initial Value */
static int iTCO_wdt_start(void)
{
unsigned int val;
- unsigned long val32;
spin_lock(&iTCO_wdt_private.io_lock);
return -EIO;
}
- /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
- val32 = inl(SMI_EN);
- val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */
- outl(val32, SMI_EN);
-
/* Force the timer to its reload value by writing to the TCO_RLD
register */
if (iTCO_wdt_private.iTCO_version == 2)
static int iTCO_wdt_stop(void)
{
unsigned int val;
- unsigned long val32;
spin_lock(&iTCO_wdt_private.io_lock);
outw(val, TCO1_CNT);
val = inw(TCO1_CNT);
- /* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */
- val32 = inl(SMI_EN);
- val32 |= 0x00002000;
- outl(val32, SMI_EN);
-
/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
iTCO_wdt_set_NO_REBOOT_bit();
int ret;
u32 base_address;
unsigned long RCBA;
+ unsigned long val32;
/*
* Find the ACPI/PM base I/O address which is the base
ret = -EIO;
goto out;
}
+ /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
+ val32 = inl(SMI_EN);
+ val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */
+ outl(val32, SMI_EN);
/* The TCO I/O registers reside in a 32-byte range pointed to
by the TCOBASE value */
static int del_ptr(struct btrfs_trans_handle *trans, struct btrfs_root *root,
struct btrfs_path *path, int level, int slot);
-inline void btrfs_init_path(struct btrfs_path *p)
-{
- memset(p, 0, sizeof(*p));
-}
-
struct btrfs_path *btrfs_alloc_path(void)
{
struct btrfs_path *path;
- path = kmem_cache_alloc(btrfs_path_cachep, GFP_NOFS);
- if (path) {
- btrfs_init_path(path);
+ path = kmem_cache_zalloc(btrfs_path_cachep, GFP_NOFS);
+ if (path)
path->reada = 1;
- }
return path;
}
/*
* reset all the locked nodes in the patch to spinning locks.
+ *
+ * held is used to keep lockdep happy, when lockdep is enabled
+ * we set held to a blocking lock before we go around and
+ * retake all the spinlocks in the path. You can safely use NULL
+ * for held
*/
-noinline void btrfs_clear_path_blocking(struct btrfs_path *p)
+noinline void btrfs_clear_path_blocking(struct btrfs_path *p,
+ struct extent_buffer *held)
{
int i;
- for (i = 0; i < BTRFS_MAX_LEVEL; i++) {
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+ /* lockdep really cares that we take all of these spinlocks
+ * in the right order. If any of the locks in the path are not
+ * currently blocking, it is going to complain. So, make really
+ * really sure by forcing the path to blocking before we clear
+ * the path blocking.
+ */
+ if (held)
+ btrfs_set_lock_blocking(held);
+ btrfs_set_path_blocking(p);
+#endif
+
+ for (i = BTRFS_MAX_LEVEL - 1; i >= 0; i--) {
if (p->nodes[i] && p->locks[i])
btrfs_clear_lock_blocking(p->nodes[i]);
}
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+ if (held)
+ btrfs_clear_lock_blocking(held);
+#endif
}
/* this also releases the path */
trans->transid, level, &ins);
BUG_ON(ret);
cow = btrfs_init_new_buffer(trans, root, prealloc_dest,
- buf->len);
+ buf->len, level);
} else {
cow = btrfs_alloc_free_block(trans, root, buf->len,
parent_start,
/* promote the child to a root */
child = read_node_slot(root, mid, 0);
+ BUG_ON(!child);
btrfs_tree_lock(child);
btrfs_set_lock_blocking(child);
- BUG_ON(!child);
ret = btrfs_cow_block(trans, root, child, mid, 0, &child, 0);
BUG_ON(ret);
if (!p->skip_locking)
p->locks[level] = 1;
- btrfs_clear_path_blocking(p);
+ btrfs_clear_path_blocking(p, NULL);
/*
* we have a lock on b and as long as we aren't changing
btrfs_set_path_blocking(p);
sret = split_node(trans, root, p, level);
- btrfs_clear_path_blocking(p);
+ btrfs_clear_path_blocking(p, NULL);
BUG_ON(sret > 0);
if (sret) {
btrfs_set_path_blocking(p);
sret = balance_level(trans, root, p, level);
- btrfs_clear_path_blocking(p);
+ btrfs_clear_path_blocking(p, NULL);
if (sret) {
ret = sret;
if (!p->skip_locking) {
int lret;
- btrfs_clear_path_blocking(p);
+ btrfs_clear_path_blocking(p, NULL);
lret = btrfs_try_spin_lock(b);
if (!lret) {
btrfs_set_path_blocking(p);
btrfs_tree_lock(b);
- btrfs_clear_path_blocking(p);
+ btrfs_clear_path_blocking(p, b);
}
}
} else {
btrfs_set_path_blocking(p);
sret = split_leaf(trans, root, key,
p, ins_len, ret == 0);
- btrfs_clear_path_blocking(p);
+ btrfs_clear_path_blocking(p, NULL);
BUG_ON(sret > 0);
if (sret) {
btrfs_release_path(root, path);
goto again;
} else {
- btrfs_clear_path_blocking(path);
goto out;
}
}
path->locks[level - 1] = 1;
path->nodes[level - 1] = cur;
unlock_up(path, level, 1);
- btrfs_clear_path_blocking(path);
+ btrfs_clear_path_blocking(path, NULL);
}
out:
if (ret == 0)
#define BTRFS_ACL_NOT_CACHED ((void *)-1)
-#ifdef CONFIG_LOCKDEP
-# define BTRFS_MAX_LEVEL 7
-#else
-# define BTRFS_MAX_LEVEL 8
-#endif
+#define BTRFS_MAX_LEVEL 8
/* holds pointers to all of the tree roots */
#define BTRFS_ROOT_TREE_OBJECTID 1ULL
u64 empty_size);
struct extent_buffer *btrfs_init_new_buffer(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
- u64 bytenr, u32 blocksize);
+ u64 bytenr, u32 blocksize,
+ int level);
int btrfs_alloc_extent(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
u64 num_bytes, u64 parent, u64 min_bytes,
void btrfs_release_path(struct btrfs_root *root, struct btrfs_path *p);
struct btrfs_path *btrfs_alloc_path(void);
void btrfs_free_path(struct btrfs_path *p);
-void btrfs_init_path(struct btrfs_path *p);
void btrfs_set_path_blocking(struct btrfs_path *p);
-void btrfs_clear_path_blocking(struct btrfs_path *p);
void btrfs_unlock_up_safe(struct btrfs_path *p, int level);
int btrfs_del_items(struct btrfs_trans_handle *trans, struct btrfs_root *root,
struct btrfs_work work;
};
+/* These are used to set the lockdep class on the extent buffer locks.
+ * The class is set by the readpage_end_io_hook after the buffer has
+ * passed csum validation but before the pages are unlocked.
+ *
+ * The lockdep class is also set by btrfs_init_new_buffer on freshly
+ * allocated blocks.
+ *
+ * The class is based on the level in the tree block, which allows lockdep
+ * to know that lower nodes nest inside the locks of higher nodes.
+ *
+ * We also add a check to make sure the highest level of the tree is
+ * the same as our lockdep setup here. If BTRFS_MAX_LEVEL changes, this
+ * code needs update as well.
+ */
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# if BTRFS_MAX_LEVEL != 8
+# error
+# endif
+static struct lock_class_key btrfs_eb_class[BTRFS_MAX_LEVEL + 1];
+static const char *btrfs_eb_name[BTRFS_MAX_LEVEL + 1] = {
+ /* leaf */
+ "btrfs-extent-00",
+ "btrfs-extent-01",
+ "btrfs-extent-02",
+ "btrfs-extent-03",
+ "btrfs-extent-04",
+ "btrfs-extent-05",
+ "btrfs-extent-06",
+ "btrfs-extent-07",
+ /* highest possible level */
+ "btrfs-extent-08",
+};
+#endif
+
/*
* extents on the btree inode are pretty simple, there's one extent
* that covers the entire device
return ret;
}
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+void btrfs_set_buffer_lockdep_class(struct extent_buffer *eb, int level)
+{
+ lockdep_set_class_and_name(&eb->lock,
+ &btrfs_eb_class[level],
+ btrfs_eb_name[level]);
+}
+#endif
+
static int btree_readpage_end_io_hook(struct page *page, u64 start, u64 end,
struct extent_state *state)
{
}
found_level = btrfs_header_level(eb);
+ btrfs_set_buffer_lockdep_class(eb, found_level);
+
ret = csum_tree_block(root, eb, 1);
if (ret)
ret = -EIO;
ret = find_and_setup_root(tree_root, fs_info,
BTRFS_DEV_TREE_OBJECTID, dev_root);
dev_root->track_dirty = 1;
-
if (ret)
goto fail_extent_root;
int btrfs_add_log_tree(struct btrfs_trans_handle *trans,
struct btrfs_root *root);
int btree_lock_page_hook(struct page *page);
+
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+void btrfs_set_buffer_lockdep_class(struct extent_buffer *eb, int level);
+#else
+static inline void btrfs_set_buffer_lockdep_class(struct extent_buffer *eb,
+ int level)
+{
+}
+#endif
#endif
int btrfs_extent_post_op(struct btrfs_trans_handle *trans,
struct btrfs_root *root)
{
- finish_current_insert(trans, root->fs_info->extent_root, 1);
- del_pending_extents(trans, root->fs_info->extent_root, 1);
+ u64 start;
+ u64 end;
+ int ret;
+
+ while(1) {
+ finish_current_insert(trans, root->fs_info->extent_root, 1);
+ del_pending_extents(trans, root->fs_info->extent_root, 1);
+
+ /* is there more work to do? */
+ ret = find_first_extent_bit(&root->fs_info->pending_del,
+ 0, &start, &end, EXTENT_WRITEBACK);
+ if (!ret)
+ continue;
+ ret = find_first_extent_bit(&root->fs_info->extent_ins,
+ 0, &start, &end, EXTENT_WRITEBACK);
+ if (!ret)
+ continue;
+ break;
+ }
return 0;
}
u64 end;
u64 priv;
u64 search = 0;
- u64 skipped = 0;
struct btrfs_fs_info *info = extent_root->fs_info;
struct btrfs_path *path;
struct pending_extent_op *extent_op, *tmp;
struct list_head insert_list, update_list;
int ret;
- int num_inserts = 0, max_inserts;
+ int num_inserts = 0, max_inserts, restart = 0;
path = btrfs_alloc_path();
INIT_LIST_HEAD(&insert_list);
ret = find_first_extent_bit(&info->extent_ins, search, &start,
&end, EXTENT_WRITEBACK);
if (ret) {
- if (skipped && all && !num_inserts &&
+ if (restart && !num_inserts &&
list_empty(&update_list)) {
- skipped = 0;
+ restart = 0;
search = 0;
continue;
}
- mutex_unlock(&info->extent_ins_mutex);
break;
}
ret = try_lock_extent(&info->extent_ins, start, end, GFP_NOFS);
if (!ret) {
- skipped = 1;
+ if (all)
+ restart = 1;
search = end + 1;
if (need_resched()) {
mutex_unlock(&info->extent_ins_mutex);
list_add_tail(&extent_op->list, &insert_list);
search = end + 1;
if (num_inserts == max_inserts) {
- mutex_unlock(&info->extent_ins_mutex);
+ restart = 1;
break;
}
} else if (extent_op->type == PENDING_BACKREF_UPDATE) {
* somebody marked this thing for deletion then just unlock it and be
* done, the free_extents will handle it
*/
- mutex_lock(&info->extent_ins_mutex);
list_for_each_entry_safe(extent_op, tmp, &update_list, list) {
clear_extent_bits(&info->extent_ins, extent_op->bytenr,
extent_op->bytenr + extent_op->num_bytes - 1,
if (!list_empty(&update_list)) {
ret = update_backrefs(trans, extent_root, path, &update_list);
BUG_ON(ret);
+
+ /* we may have COW'ed new blocks, so lets start over */
+ if (all)
+ restart = 1;
}
/*
* need to make sure everything is cleaned then reset everything and
* go back to the beginning
*/
- if (!num_inserts && all && skipped) {
+ if (!num_inserts && restart) {
search = 0;
- skipped = 0;
+ restart = 0;
INIT_LIST_HEAD(&update_list);
INIT_LIST_HEAD(&insert_list);
goto again;
BUG_ON(ret);
/*
- * if we broke out of the loop in order to insert stuff because we hit
- * the maximum number of inserts at a time we can handle, then loop
- * back and pick up where we left off
+ * if restart is set for whatever reason we need to go back and start
+ * searching through the pending list again.
+ *
+ * We just inserted some extents, which could have resulted in new
+ * blocks being allocated, which would result in new blocks needing
+ * updates, so if all is set we _must_ restart to get the updated
+ * blocks.
*/
- if (num_inserts == max_inserts) {
- INIT_LIST_HEAD(&insert_list);
- INIT_LIST_HEAD(&update_list);
- num_inserts = 0;
- goto again;
- }
-
- /*
- * again, if we need to make absolutely sure there are no more pending
- * extent operations left and we know that we skipped some, go back to
- * the beginning and do it all again
- */
- if (all && skipped) {
+ if (restart || all) {
INIT_LIST_HEAD(&insert_list);
INIT_LIST_HEAD(&update_list);
search = 0;
- skipped = 0;
+ restart = 0;
num_inserts = 0;
goto again;
}
goto again;
}
+ if (!err)
+ finish_current_insert(trans, extent_root, 0);
return err;
}
if (data & BTRFS_BLOCK_GROUP_METADATA) {
last_ptr = &root->fs_info->last_alloc;
- empty_cluster = 64 * 1024;
+ if (!btrfs_test_opt(root, SSD))
+ empty_cluster = 64 * 1024;
}
if ((data & BTRFS_BLOCK_GROUP_DATA) && btrfs_test_opt(root, SSD))
struct extent_buffer *btrfs_init_new_buffer(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
- u64 bytenr, u32 blocksize)
+ u64 bytenr, u32 blocksize,
+ int level)
{
struct extent_buffer *buf;
if (!buf)
return ERR_PTR(-ENOMEM);
btrfs_set_header_generation(buf, trans->transid);
+ btrfs_set_buffer_lockdep_class(buf, level);
btrfs_tree_lock(buf);
clean_tree_block(trans, root, buf);
return ERR_PTR(ret);
}
- buf = btrfs_init_new_buffer(trans, root, ins.objectid, blocksize);
+ buf = btrfs_init_new_buffer(trans, root, ins.objectid,
+ blocksize, level);
return buf;
}
prev_block = block_start;
}
+ mutex_lock(&extent_root->fs_info->trans_mutex);
btrfs_record_root_in_trans(found_root);
+ mutex_unlock(&extent_root->fs_info->trans_mutex);
if (ref_path->owner_objectid >= BTRFS_FIRST_FREE_OBJECTID) {
/*
* try to update data extent references while
node = tree_insert(&tree->state, prealloc->end, &prealloc->rb_node);
if (node) {
- struct extent_state *found;
- found = rb_entry(node, struct extent_state, rb_node);
free_extent_state(prealloc);
return -EEXIST;
}
search_key.type = 0;
search_key.offset = 0;
- btrfs_init_path(path);
start_found = 0;
ret = btrfs_search_slot(trans, root, &search_key, path, 0, 0);
if (ret < 0)
key.offset = (u64)-1;
key.type = (u8)-1;
- btrfs_init_path(path);
-
search_again:
ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
if (ret < 0)
{
if (PageWriteback(page) || PageDirty(page))
return 0;
- return __btrfs_releasepage(page, gfp_flags);
+ return __btrfs_releasepage(page, gfp_flags & GFP_NOFS);
}
static void btrfs_invalidatepage(struct page *page, unsigned long offset)
#include "extent_io.h"
#include "locking.h"
-/*
- * btrfs_header_level() isn't free, so don't call it when lockdep isn't
- * on
- */
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-static inline void spin_nested(struct extent_buffer *eb)
-{
- spin_lock_nested(&eb->lock, BTRFS_MAX_LEVEL - btrfs_header_level(eb));
-}
-#else
static inline void spin_nested(struct extent_buffer *eb)
{
spin_lock(&eb->lock);
}
-#endif
/*
* Setting a lock to blocking will drop the spinlock and set the
btrfs_start_delalloc_inodes(root);
btrfs_wait_ordered_extents(root, 0);
- btrfs_clean_old_snapshots(root);
trans = btrfs_start_transaction(root, 1);
ret = btrfs_commit_transaction(trans, root);
sb->s_dirt = 0;
struct btrfs_root *root = btrfs_sb(sb);
int ret;
+ ret = btrfs_parse_options(root, data);
+ if (ret)
+ return -EINVAL;
+
if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY))
return 0;
num_bytes -= btrfs_root_used(&dirty->root->root_item);
bytes_used = btrfs_root_used(&root->root_item);
if (num_bytes) {
+ mutex_lock(&root->fs_info->trans_mutex);
btrfs_record_root_in_trans(root);
+ mutex_unlock(&root->fs_info->trans_mutex);
btrfs_set_root_used(&root->root_item,
bytes_used - num_bytes);
}
BUG_ON(!wc.replay_dest);
wc.replay_dest->log_root = log;
+ mutex_lock(&fs_info->trans_mutex);
btrfs_record_root_in_trans(wc.replay_dest);
+ mutex_unlock(&fs_info->trans_mutex);
ret = walk_log_tree(trans, log, &wc);
BUG_ON(ret);
free_extent_map(em);
}
- map = kzalloc(sizeof(*map), GFP_NOFS);
- if (!map)
- return -ENOMEM;
-
em = alloc_extent_map(GFP_NOFS);
if (!em)
return -ENOMEM;
if (!sb)
return -ENOMEM;
btrfs_set_buffer_uptodate(sb);
+ btrfs_set_buffer_lockdep_class(sb, 0);
+
write_extent_buffer(sb, super_copy, 0, BTRFS_SUPER_INFO_SIZE);
array_size = btrfs_super_sys_array_size(super_copy);
__inc_zone_page_state(page, NR_FILE_DIRTY);
__inc_bdi_stat(mapping->backing_dev_info,
BDI_RECLAIMABLE);
+ task_dirty_inc(current);
task_io_account_write(PAGE_CACHE_SIZE);
}
radix_tree_tag_set(&mapping->page_tree,
/* Big K */
COMPATIBLE_IOCTL(PIO_FONT)
COMPATIBLE_IOCTL(GIO_FONT)
+COMPATIBLE_IOCTL(PIO_CMAP)
+COMPATIBLE_IOCTL(GIO_CMAP)
ULONG_IOCTL(KDSIGACCEPT)
COMPATIBLE_IOCTL(KDGETKEYCODE)
COMPATIBLE_IOCTL(KDSETKEYCODE)
{
unsigned len = le16_to_cpu(dlen);
- if (len == EXT4_MAX_REC_LEN)
+ if (len == EXT4_MAX_REC_LEN || len == 0)
return 1 << 16;
return len;
}
static inline int ext4_begin_ordered_truncate(struct inode *inode,
loff_t new_size)
{
- return jbd2_journal_begin_ordered_truncate(&EXT4_I(inode)->jinode,
- new_size);
+ return jbd2_journal_begin_ordered_truncate(
+ EXT4_SB(inode->i_sb)->s_journal,
+ &EXT4_I(inode)->jinode,
+ new_size);
}
static void ext4_invalidatepage(struct page *page, unsigned long offset);
int no_nrwrite_index_update;
int pages_written = 0;
long pages_skipped;
+ int range_cyclic, cycled = 1, io_done = 0;
int needed_blocks, ret = 0, nr_to_writebump = 0;
struct ext4_sb_info *sbi = EXT4_SB(mapping->host->i_sb);
if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX)
range_whole = 1;
- if (wbc->range_cyclic)
+ range_cyclic = wbc->range_cyclic;
+ if (wbc->range_cyclic) {
index = mapping->writeback_index;
- else
+ if (index)
+ cycled = 0;
+ wbc->range_start = index << PAGE_CACHE_SHIFT;
+ wbc->range_end = LLONG_MAX;
+ wbc->range_cyclic = 0;
+ } else
index = wbc->range_start >> PAGE_CACHE_SHIFT;
mpd.wbc = wbc;
wbc->no_nrwrite_index_update = 1;
pages_skipped = wbc->pages_skipped;
+retry:
while (!ret && wbc->nr_to_write > 0) {
/*
pages_written += mpd.pages_written;
wbc->pages_skipped = pages_skipped;
ret = 0;
+ io_done = 1;
} else if (wbc->nr_to_write)
/*
* There is no more writeout needed
*/
break;
}
+ if (!io_done && !cycled) {
+ cycled = 1;
+ index = 0;
+ wbc->range_start = index << PAGE_CACHE_SHIFT;
+ wbc->range_end = mapping->writeback_index - 1;
+ goto retry;
+ }
if (pages_skipped != wbc->pages_skipped)
printk(KERN_EMERG "This should not happen leaving %s "
"with nr_to_write = %ld ret = %d\n",
/* Update index */
index += pages_written;
+ wbc->range_cyclic = range_cyclic;
if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0))
/*
* set the writeback_index so that range_cyclic
pa->pa_free = pa->pa_len;
atomic_set(&pa->pa_count, 1);
spin_lock_init(&pa->pa_lock);
+ INIT_LIST_HEAD(&pa->pa_inode_list);
+ INIT_LIST_HEAD(&pa->pa_group_list);
pa->pa_deleted = 0;
pa->pa_linear = 0;
atomic_set(&pa->pa_count, 1);
spin_lock_init(&pa->pa_lock);
INIT_LIST_HEAD(&pa->pa_inode_list);
+ INIT_LIST_HEAD(&pa->pa_group_list);
pa->pa_deleted = 0;
pa->pa_linear = 1;
pa->pa_free -= ac->ac_b_ex.fe_len;
pa->pa_len -= ac->ac_b_ex.fe_len;
spin_unlock(&pa->pa_lock);
- /*
- * We want to add the pa to the right bucket.
- * Remove it from the list and while adding
- * make sure the list to which we are adding
- * doesn't grow big.
- */
- if (likely(pa->pa_free)) {
- spin_lock(pa->pa_obj_lock);
- list_del_rcu(&pa->pa_inode_list);
- spin_unlock(pa->pa_obj_lock);
- ext4_mb_add_n_trim(ac);
- }
}
- ext4_mb_put_pa(ac, ac->ac_sb, pa);
}
if (ac->alloc_semp)
up_read(ac->alloc_semp);
+ if (pa) {
+ /*
+ * We want to add the pa to the right bucket.
+ * Remove it from the list and while adding
+ * make sure the list to which we are adding
+ * doesn't grow big. We need to release
+ * alloc_semp before calling ext4_mb_add_n_trim()
+ */
+ if (pa->pa_linear && likely(pa->pa_free)) {
+ spin_lock(pa->pa_obj_lock);
+ list_del_rcu(&pa->pa_inode_list);
+ spin_unlock(pa->pa_obj_lock);
+ ext4_mb_add_n_trim(ac);
+ }
+ ext4_mb_put_pa(ac, ac->ac_sb, pa);
+ }
if (ac->ac_bitmap_page)
page_cache_release(ac->ac_bitmap_page);
if (ac->ac_buddy_page)
+ 1);
if (IS_ERR(handle)) {
retval = PTR_ERR(handle);
- goto err_out;
+ return retval;
}
tmp_inode = ext4_new_inode(handle,
inode->i_sb->s_root->d_inode,
if (IS_ERR(tmp_inode)) {
retval = -ENOMEM;
ext4_journal_stop(handle);
- tmp_inode = NULL;
- goto err_out;
+ return retval;
}
i_size_write(tmp_inode, i_size_read(inode));
/*
ext4_journal_stop(handle);
- if (tmp_inode)
- iput(tmp_inode);
+ iput(tmp_inode);
return retval;
}
static int ext4_sync_fs(struct super_block *sb, int wait)
{
int ret = 0;
+ tid_t target;
trace_mark(ext4_sync_fs, "dev %s wait %d", sb->s_id, wait);
sb->s_dirt = 0;
if (EXT4_SB(sb)->s_journal) {
- if (wait)
- ret = ext4_force_commit(sb);
- else
- jbd2_journal_start_commit(EXT4_SB(sb)->s_journal, NULL);
+ if (jbd2_journal_start_commit(EXT4_SB(sb)->s_journal,
+ &target)) {
+ if (wait)
+ jbd2_log_wait_commit(EXT4_SB(sb)->s_journal,
+ target);
+ }
} else {
ext4_commit_super(sb, EXT4_SB(sb)->s_es, wait);
}
}
/*
- * Called under j_state_lock. Returns true if a transaction was started.
+ * Called under j_state_lock. Returns true if a transaction commit was started.
*/
int __jbd2_log_start_commit(journal_t *journal, tid_t target)
{
/*
* Start a commit of the current running transaction (if any). Returns true
- * if a transaction was started, and fills its tid in at *ptid
+ * if a transaction is going to be committed (or is currently already
+ * committing), and fills its tid in at *ptid
*/
int jbd2_journal_start_commit(journal_t *journal, tid_t *ptid)
{
if (journal->j_running_transaction) {
tid_t tid = journal->j_running_transaction->t_tid;
- ret = __jbd2_log_start_commit(journal, tid);
- if (ret && ptid)
+ __jbd2_log_start_commit(journal, tid);
+ /* There's a running transaction and we've just made sure
+ * it's commit has been scheduled. */
+ if (ptid)
*ptid = tid;
- } else if (journal->j_committing_transaction && ptid) {
+ ret = 1;
+ } else if (journal->j_committing_transaction) {
/*
* If ext3_write_super() recently started a commit, then we
* have to wait for completion of that transaction
*/
- *ptid = journal->j_committing_transaction->t_tid;
+ if (ptid)
+ *ptid = journal->j_committing_transaction->t_tid;
ret = 1;
}
spin_unlock(&journal->j_state_lock);
}
/*
- * This function must be called when inode is journaled in ordered mode
- * before truncation happens. It starts writeout of truncated part in
- * case it is in the committing transaction so that we stand to ordered
- * mode consistency guarantees.
+ * File truncate and transaction commit interact with each other in a
+ * non-trivial way. If a transaction writing data block A is
+ * committing, we cannot discard the data by truncate until we have
+ * written them. Otherwise if we crashed after the transaction with
+ * write has committed but before the transaction with truncate has
+ * committed, we could see stale data in block A. This function is a
+ * helper to solve this problem. It starts writeout of the truncated
+ * part in case it is in the committing transaction.
+ *
+ * Filesystem code must call this function when inode is journaled in
+ * ordered mode before truncation happens and after the inode has been
+ * placed on orphan list with the new inode size. The second condition
+ * avoids the race that someone writes new data and we start
+ * committing the transaction after this function has been called but
+ * before a transaction for truncate is started (and furthermore it
+ * allows us to optimize the case where the addition to orphan list
+ * happens in the same transaction as write --- we don't have to write
+ * any data in such case).
*/
-int jbd2_journal_begin_ordered_truncate(struct jbd2_inode *inode,
+int jbd2_journal_begin_ordered_truncate(journal_t *journal,
+ struct jbd2_inode *jinode,
loff_t new_size)
{
- journal_t *journal;
- transaction_t *commit_trans;
+ transaction_t *inode_trans, *commit_trans;
int ret = 0;
- if (!inode->i_transaction && !inode->i_next_transaction)
+ /* This is a quick check to avoid locking if not necessary */
+ if (!jinode->i_transaction)
goto out;
- journal = inode->i_transaction->t_journal;
+ /* Locks are here just to force reading of recent values, it is
+ * enough that the transaction was not committing before we started
+ * a transaction adding the inode to orphan list */
spin_lock(&journal->j_state_lock);
commit_trans = journal->j_committing_transaction;
spin_unlock(&journal->j_state_lock);
- if (inode->i_transaction == commit_trans) {
- ret = filemap_fdatawrite_range(inode->i_vfs_inode->i_mapping,
+ spin_lock(&journal->j_list_lock);
+ inode_trans = jinode->i_transaction;
+ spin_unlock(&journal->j_list_lock);
+ if (inode_trans == commit_trans) {
+ ret = filemap_fdatawrite_range(jinode->i_vfs_inode->i_mapping,
new_size, LLONG_MAX);
if (ret)
jbd2_journal_abort(journal, ret);
*/
for_each_possible_cpu(cpu) {
struct mnt_writer *cpu_writer = &per_cpu(mnt_writers, cpu);
- if (cpu_writer->mnt != mnt)
- continue;
spin_lock(&cpu_writer->lock);
+ if (cpu_writer->mnt != mnt) {
+ spin_unlock(&cpu_writer->lock);
+ continue;
+ }
atomic_add(cpu_writer->count, &mnt->__mnt_writers);
cpu_writer->count = 0;
/*
int ret;
do {
- if (unlikely(!idr_pre_get(&ih->idr, GFP_KERNEL)))
+ if (unlikely(!idr_pre_get(&ih->idr, GFP_NOFS)))
return -ENOSPC;
ret = idr_get_new_above(&ih->idr, watch, ih->last_wd+1, &watch->wd);
} while (ret == -EAGAIN);
static inline int ocfs2_begin_ordered_truncate(struct inode *inode,
loff_t new_size)
{
- return jbd2_journal_begin_ordered_truncate(&OCFS2_I(inode)->ip_jinode,
- new_size);
+ return jbd2_journal_begin_ordered_truncate(
+ OCFS2_SB(inode->i_sb)->journal->j_journal,
+ &OCFS2_I(inode)->ip_jinode,
+ new_size);
}
#endif /* OCFS2_JOURNAL_H */
*/
file->f_version = 0;
- /* SEQ files support lseek, but not pread/pwrite */
- file->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE);
+ /*
+ * seq_files support lseek() and pread(). They do not implement
+ * write() at all, but we clear FMODE_PWRITE here for historical
+ * reasons.
+ *
+ * If a client of seq_files a) implements file.write() and b) wishes to
+ * support pwrite() then that client will need to implement its own
+ * file.open() which calls seq_open() and then sets FMODE_PWRITE.
+ */
+ file->f_mode &= ~FMODE_PWRITE;
return 0;
}
EXPORT_SYMBOL(seq_open);
int err = 0;
mutex_lock(&m->lock);
+
+ /* Don't assume *ppos is where we left it */
+ if (unlikely(*ppos != m->read_pos)) {
+ m->read_pos = *ppos;
+ while ((err = traverse(m, *ppos)) == -EAGAIN)
+ ;
+ if (err) {
+ /* With prejudice... */
+ m->read_pos = 0;
+ m->version = 0;
+ m->index = 0;
+ m->count = 0;
+ goto Done;
+ }
+ }
+
/*
* seq_file->op->..m_start/m_stop/m_next may do special actions
* or optimisations based on the file->f_version, so we want to
Done:
if (!copied)
copied = err;
- else
+ else {
*ppos += copied;
+ m->read_pos += copied;
+ }
file->f_version = m->version;
mutex_unlock(&m->lock);
return copied;
if (offset < 0)
break;
retval = offset;
- if (offset != file->f_pos) {
+ if (offset != m->read_pos) {
while ((retval=traverse(m, offset)) == -EAGAIN)
;
if (retval) {
/* with extreme prejudice... */
file->f_pos = 0;
+ m->read_pos = 0;
m->version = 0;
m->index = 0;
m->count = 0;
} else {
+ m->read_pos = offset;
retval = file->f_pos = offset;
}
}
* lock ordering than usbfs:
*/
lockdep_set_class(&s->s_lock, &type->s_lock_key);
- down_write(&s->s_umount);
+ /*
+ * sget() can have s_umount recursion.
+ *
+ * When it cannot find a suitable sb, it allocates a new
+ * one (this one), and tries again to find a suitable old
+ * one.
+ *
+ * In case that succeeds, it will acquire the s_umount
+ * lock of the old one. Since these are clearly distrinct
+ * locks, and this object isn't exposed yet, there's no
+ * risk of deadlocks.
+ *
+ * Annotate this by putting this lock in a different
+ * subclass.
+ */
+ down_write_nested(&s->s_umount, SINGLE_DEPTH_NESTING);
s->s_count = S_BIAS;
atomic_set(&s->s_active, 1);
mutex_init(&s->s_vfs_rename_mutex);
BUILD_BUG_ON(TFD_CLOEXEC != O_CLOEXEC);
BUILD_BUG_ON(TFD_NONBLOCK != O_NONBLOCK);
- if (flags & ~(TFD_CLOEXEC | TFD_NONBLOCK))
- return -EINVAL;
- if (clockid != CLOCK_MONOTONIC &&
- clockid != CLOCK_REALTIME)
+ if ((flags & ~TFD_CREATE_FLAGS) ||
+ (clockid != CLOCK_MONOTONIC &&
+ clockid != CLOCK_REALTIME))
return -EINVAL;
ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
hrtimer_init(&ctx->tmr, clockid, HRTIMER_MODE_ABS);
ufd = anon_inode_getfd("[timerfd]", &timerfd_fops, ctx,
- flags & (O_CLOEXEC | O_NONBLOCK));
+ flags & TFD_SHARED_FCNTL_FLAGS);
if (ufd < 0)
kfree(ctx);
if (copy_from_user(&ktmr, utmr, sizeof(ktmr)))
return -EFAULT;
- if (!timespec_valid(&ktmr.it_value) ||
+ if ((flags & ~TFD_SETTIME_FLAGS) ||
+ !timespec_valid(&ktmr.it_value) ||
!timespec_valid(&ktmr.it_interval))
return -EINVAL;
#define __swp_type(x) (((x).val >> 2) & 0x1f)
#define __swp_offset(x) ((x).val >> 8)
#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 8) })
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte })
+#define __pte_to_swp_entry(_pte) ((swp_entry_t) { (_pte).pte })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
static inline int pte_file(pte_t pte)
* @local: per-cpu pointer to a struct dma_chan_percpu
* @client-count: how many clients are using this channel
* @table_count: number of appearances in the mem-to-mem allocation table
+ * @private: private data for certain client-channel associations
*/
struct dma_chan {
struct dma_device *device;
struct dma_chan_percpu *local;
int client_count;
int table_count;
+ void *private;
};
/**
/*
* include/linux/firmware-map.h:
* Copyright (C) 2008 SUSE LINUX Products GmbH
- * by Bernhard Walle <bwalle@suse.de>
+ * by Bernhard Walle <bernhard.walle@gmx.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License v2.0 as published by
#define MAY_ACCESS 16
#define MAY_OPEN 32
+/*
+ * flags in file.f_mode. Note that FMODE_READ and FMODE_WRITE must correspond
+ * to O_WRONLY and O_RDWR via the strange trick in __dentry_open()
+ */
+
/* file is open for reading */
#define FMODE_READ ((__force fmode_t)1)
/* file is open for writing */
#define FMODE_WRITE ((__force fmode_t)2)
/* file is seekable */
#define FMODE_LSEEK ((__force fmode_t)4)
-/* file can be accessed using pread/pwrite */
+/* file can be accessed using pread */
#define FMODE_PREAD ((__force fmode_t)8)
-#define FMODE_PWRITE FMODE_PREAD /* These go hand in hand */
+/* file can be accessed using pwrite */
+#define FMODE_PWRITE ((__force fmode_t)16)
/* File is opened for execution with sys_execve / sys_uselib */
-#define FMODE_EXEC ((__force fmode_t)16)
+#define FMODE_EXEC ((__force fmode_t)32)
/* File is opened with O_NDELAY (only set for block devices) */
-#define FMODE_NDELAY ((__force fmode_t)32)
+#define FMODE_NDELAY ((__force fmode_t)64)
/* File is opened with O_EXCL (only set for block devices) */
-#define FMODE_EXCL ((__force fmode_t)64)
+#define FMODE_EXCL ((__force fmode_t)128)
/* File is opened using open(.., 3, ..) and is writeable only for ioctls
(specialy hack for floppy.c) */
-#define FMODE_WRITE_IOCTL ((__force fmode_t)128)
+#define FMODE_WRITE_IOCTL ((__force fmode_t)256)
/*
* Don't update ctime and mtime.
extern int jbd2_journal_bmap(journal_t *, unsigned long, unsigned long long *);
extern int jbd2_journal_force_commit(journal_t *);
extern int jbd2_journal_file_inode(handle_t *handle, struct jbd2_inode *inode);
-extern int jbd2_journal_begin_ordered_truncate(struct jbd2_inode *inode, loff_t new_size);
+extern int jbd2_journal_begin_ordered_truncate(journal_t *journal,
+ struct jbd2_inode *inode, loff_t new_size);
extern void jbd2_journal_init_jbd_inode(struct jbd2_inode *jinode, struct inode *inode);
extern void jbd2_journal_release_jbd_inode(journal_t *journal, struct jbd2_inode *jinode);
__u32 pad;
union {
char dummy[512]; /* reserving space */
-#ifdef CONFIG_X86
+#ifdef __KVM_HAVE_PIT
struct kvm_pic_state pic;
#endif
-#if defined(CONFIG_X86) || defined(CONFIG_IA64)
+#ifdef __KVM_HAVE_IOAPIC
struct kvm_ioapic_state ioapic;
#endif
} chip;
#define KVM_CAP_MP_STATE 14
#define KVM_CAP_COALESCED_MMIO 15
#define KVM_CAP_SYNC_MMU 16 /* Changes to host mmap are reflected in guest */
-#if defined(CONFIG_X86)||defined(CONFIG_IA64)
+#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
#define KVM_CAP_DEVICE_ASSIGNMENT 17
#endif
#define KVM_CAP_IOMMU 18
-#if defined(CONFIG_X86)
+#ifdef __KVM_HAVE_MSI
#define KVM_CAP_DEVICE_MSI 20
#endif
/* Bug in KVM_SET_USER_MEMORY_REGION fixed: */
#define KVM_CAP_DESTROY_MEMORY_REGION_WORKS 21
-#if defined(CONFIG_X86)
+#ifdef __KVM_HAVE_USER_NMI
#define KVM_CAP_USER_NMI 22
#endif
struct kvm *kvm_arch_create_vm(void);
void kvm_arch_destroy_vm(struct kvm *kvm);
void kvm_free_all_assigned_devices(struct kvm *kvm);
+void kvm_arch_sync_events(struct kvm *kvm);
int kvm_cpu_get_interrupt(struct kvm_vcpu *v);
int kvm_cpu_has_interrupt(struct kvm_vcpu *v);
typedef int (*work_fn_t)(unsigned long, unsigned long, void *);
extern void work_with_active_regions(int nid, work_fn_t work_fn, void *data);
extern void sparse_memory_present_with_active_regions(int nid);
-#ifndef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
-extern int early_pfn_to_nid(unsigned long pfn);
-#endif /* CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID */
#endif /* CONFIG_ARCH_POPULATES_NODE_MAP */
+
+#if !defined(CONFIG_ARCH_POPULATES_NODE_MAP) && \
+ !defined(CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID)
+static inline int __early_pfn_to_nid(unsigned long pfn)
+{
+ return 0;
+}
+#else
+/* please see mm/page_alloc.c */
+extern int __meminit early_pfn_to_nid(unsigned long pfn);
+#ifdef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
+/* there is a per-arch backend function. */
+extern int __meminit __early_pfn_to_nid(unsigned long pfn);
+#endif /* CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID */
+#endif
+
extern void set_dma_reserve(unsigned long new_dma_reserve);
extern void memmap_init_zone(unsigned long, int, unsigned long,
unsigned long, enum memmap_context);
/* mm/page-writeback.c */
int write_one_page(struct page *page, int wait);
+void task_dirty_inc(struct task_struct *tsk);
/* readahead.c */
#define VM_MAX_READAHEAD 128 /* kbytes */
extern void *alloc_locked_buffer(size_t size);
extern void free_locked_buffer(void *buffer, size_t size);
+extern void release_locked_buffer(void *buffer, size_t size);
#endif /* __KERNEL__ */
#endif /* _LINUX_MM_H */
#endif /* CONFIG_SPARSEMEM */
#ifdef CONFIG_NODES_SPAN_OTHER_NODES
-#define early_pfn_in_nid(pfn, nid) (early_pfn_to_nid(pfn) == (nid))
+bool early_pfn_in_nid(unsigned long pfn, int nid);
#else
#define early_pfn_in_nid(pfn, nid) (1)
#endif
#define PCI_DEVICE_ID_VIA_VT3351 0x0351
#define PCI_DEVICE_ID_VIA_VT3364 0x0364
#define PCI_DEVICE_ID_VIA_8371_0 0x0391
+#define PCI_DEVICE_ID_VIA_6415 0x0415
#define PCI_DEVICE_ID_VIA_8501_0 0x0501
#define PCI_DEVICE_ID_VIA_82C561 0x0561
#define PCI_DEVICE_ID_VIA_82C586_1 0x0571
#define PCI_DEVICE_ID_DIGI_DF_M_E 0x0071
#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_A 0x0072
#define PCI_DEVICE_ID_DIGI_DF_M_A 0x0073
+#define PCI_DEVICE_ID_DIGI_NEO_8 0x00B1
#define PCI_DEVICE_ID_NEO_2DB9 0x00C8
#define PCI_DEVICE_ID_NEO_2DB9PRI 0x00C9
#define PCI_DEVICE_ID_NEO_2RJ45 0x00CA
size_t from;
size_t count;
loff_t index;
+ loff_t read_pos;
u64 version;
struct mutex lock;
const struct seq_operations *op;
/* For O_CLOEXEC and O_NONBLOCK */
#include <linux/fcntl.h>
-/* Flags for timerfd_settime. */
+/*
+ * CAREFUL: Check include/asm-generic/fcntl.h when defining
+ * new flags, since they might collide with O_* ones. We want
+ * to re-use O_* flags that couldn't possibly have a meaning
+ * from eventfd, in order to leave a free define-space for
+ * shared O_* flags.
+ */
#define TFD_TIMER_ABSTIME (1 << 0)
-
-/* Flags for timerfd_create. */
#define TFD_CLOEXEC O_CLOEXEC
#define TFD_NONBLOCK O_NONBLOCK
+#define TFD_SHARED_FCNTL_FLAGS (TFD_CLOEXEC | TFD_NONBLOCK)
+/* Flags for timerfd_create. */
+#define TFD_CREATE_FLAGS TFD_SHARED_FCNTL_FLAGS
+/* Flags for timerfd_settime. */
+#define TFD_SETTIME_FLAGS TFD_TIMER_ABSTIME
#endif /* _LINUX_TIMERFD_H */
-
unsigned long flags, void *caller);
extern struct vm_struct *__get_vm_area(unsigned long size, unsigned long flags,
unsigned long start, unsigned long end);
+extern struct vm_struct *__get_vm_area_caller(unsigned long size,
+ unsigned long flags,
+ unsigned long start, unsigned long end,
+ void *caller);
extern struct vm_struct *get_vm_area_node(unsigned long size,
unsigned long flags, int node,
gfp_t gfp_mask);
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_KALLSYMS) += kallsyms.o
obj-$(CONFIG_PM) += power/
+obj-$(CONFIG_FREEZER) += power/
obj-$(CONFIG_BSD_PROCESS_ACCT) += acct.o
obj-$(CONFIG_KEXEC) += kexec.o
obj-$(CONFIG_BACKTRACE_SELF_TEST) += backtracetest.o
mutex_unlock(&cgroup_mutex);
- kfree(root);
kill_litter_super(sb);
+ kfree(root);
}
static struct file_system_type cgroup_fs_type = {
u32 val, ktime_t *abs_time, u32 bitset, int clockrt)
{
struct task_struct *curr = current;
+ struct restart_block *restart;
DECLARE_WAITQUEUE(wait, curr);
struct futex_hash_bucket *hb;
struct futex_q q;
if (!ret)
goto retry;
- return ret;
+ goto out;
}
ret = -EWOULDBLOCK;
- if (uval != val)
- goto out_unlock_put_key;
+ if (unlikely(uval != val)) {
+ queue_unlock(&q, hb);
+ goto out_put_key;
+ }
/* Only actually queue if *uaddr contained val. */
queue_me(&q, hb);
*/
/* If we were woken (and unqueued), we succeeded, whatever. */
+ ret = 0;
if (!unqueue_me(&q))
- return 0;
+ goto out_put_key;
+ ret = -ETIMEDOUT;
if (rem)
- return -ETIMEDOUT;
+ goto out_put_key;
/*
* We expect signal_pending(current), but another thread may
* have handled it for us already.
*/
+ ret = -ERESTARTSYS;
if (!abs_time)
- return -ERESTARTSYS;
- else {
- struct restart_block *restart;
- restart = ¤t_thread_info()->restart_block;
- restart->fn = futex_wait_restart;
- restart->futex.uaddr = (u32 *)uaddr;
- restart->futex.val = val;
- restart->futex.time = abs_time->tv64;
- restart->futex.bitset = bitset;
- restart->futex.flags = 0;
-
- if (fshared)
- restart->futex.flags |= FLAGS_SHARED;
- if (clockrt)
- restart->futex.flags |= FLAGS_CLOCKRT;
- return -ERESTART_RESTARTBLOCK;
- }
+ goto out_put_key;
-out_unlock_put_key:
- queue_unlock(&q, hb);
- put_futex_key(fshared, &q.key);
+ restart = ¤t_thread_info()->restart_block;
+ restart->fn = futex_wait_restart;
+ restart->futex.uaddr = (u32 *)uaddr;
+ restart->futex.val = val;
+ restart->futex.time = abs_time->tv64;
+ restart->futex.bitset = bitset;
+ restart->futex.flags = 0;
+
+ if (fshared)
+ restart->futex.flags |= FLAGS_SHARED;
+ if (clockrt)
+ restart->futex.flags |= FLAGS_CLOCKRT;
+ ret = -ERESTART_RESTARTBLOCK;
+
+out_put_key:
+ put_futex_key(fshared, &q.key);
out:
return ret;
}
}
}
+/*
+ * Sample a process (thread group) timer for the given group_leader task.
+ * Must be called with tasklist_lock held for reading.
+ */
+static int cpu_timer_sample_group(const clockid_t which_clock,
+ struct task_struct *p,
+ union cpu_time_count *cpu)
+{
+ struct task_cputime cputime;
+
+ thread_group_cputimer(p, &cputime);
+ switch (CPUCLOCK_WHICH(which_clock)) {
+ default:
+ return -EINVAL;
+ case CPUCLOCK_PROF:
+ cpu->cpu = cputime_add(cputime.utime, cputime.stime);
+ break;
+ case CPUCLOCK_VIRT:
+ cpu->cpu = cputime.utime;
+ break;
+ case CPUCLOCK_SCHED:
+ cpu->sched = cputime.sum_exec_runtime + task_delta_exec(p);
+ break;
+ }
+ return 0;
+}
+
/*
* Guts of sys_timer_settime for CPU timers.
* This is called with the timer locked and interrupts disabled.
if (CPUCLOCK_PERTHREAD(timer->it_clock)) {
cpu_clock_sample(timer->it_clock, p, &val);
} else {
- cpu_clock_sample_group(timer->it_clock, p, &val);
+ cpu_timer_sample_group(timer->it_clock, p, &val);
}
if (old) {
read_unlock(&tasklist_lock);
goto dead;
} else {
- cpu_clock_sample_group(timer->it_clock, p, &now);
+ cpu_timer_sample_group(timer->it_clock, p, &now);
clear_dead = (unlikely(p->exit_state) &&
thread_group_empty(p));
}
clear_dead_task(timer, now);
goto out_unlock;
}
- cpu_clock_sample_group(timer->it_clock, p, &now);
+ cpu_timer_sample_group(timer->it_clock, p, &now);
bump_cpu_timer(timer, now);
/* Leave the tasklist_lock locked for the call below. */
}
}
}
-/*
- * Sample a process (thread group) timer for the given group_leader task.
- * Must be called with tasklist_lock held for reading.
- */
-static int cpu_timer_sample_group(const clockid_t which_clock,
- struct task_struct *p,
- union cpu_time_count *cpu)
-{
- struct task_cputime cputime;
-
- thread_group_cputimer(p, &cputime);
- switch (CPUCLOCK_WHICH(which_clock)) {
- default:
- return -EINVAL;
- case CPUCLOCK_PROF:
- cpu->cpu = cputime_add(cputime.utime, cputime.stime);
- break;
- case CPUCLOCK_VIRT:
- cpu->cpu = cputime.utime;
- break;
- case CPUCLOCK_SCHED:
- cpu->sched = cputime.sum_exec_runtime + task_delta_exec(p);
- break;
- }
- return 0;
-}
-
/*
* Set one of the process-wide special case CPU timers.
* The tsk->sighand->siglock must be held by the caller.
EXTRA_CFLAGS += -DDEBUG
endif
-obj-y := main.o
+obj-$(CONFIG_PM) += main.o
obj-$(CONFIG_PM_SLEEP) += console.o
obj-$(CONFIG_FREEZER) += process.o
obj-$(CONFIG_HIBERNATION) += swsusp.o disk.o snapshot.o swap.o user.o
static void rq_attach_root(struct rq *rq, struct root_domain *rd)
{
+ struct root_domain *old_rd = NULL;
unsigned long flags;
spin_lock_irqsave(&rq->lock, flags);
if (rq->rd) {
- struct root_domain *old_rd = rq->rd;
+ old_rd = rq->rd;
if (cpumask_test_cpu(rq->cpu, old_rd->online))
set_rq_offline(rq);
cpumask_clear_cpu(rq->cpu, old_rd->span);
- if (atomic_dec_and_test(&old_rd->refcount))
- free_rootdomain(old_rd);
+ /*
+ * If we dont want to free the old_rt yet then
+ * set old_rd to NULL to skip the freeing later
+ * in this function:
+ */
+ if (!atomic_dec_and_test(&old_rd->refcount))
+ old_rd = NULL;
}
atomic_inc(&rd->refcount);
set_rq_online(rq);
spin_unlock_irqrestore(&rq->lock, flags);
+
+ if (old_rd)
+ free_rootdomain(old_rd);
}
static int __init_refok init_rootdomain(struct root_domain *rd, bool bootmem)
functioning properly. It will do tests on all the configured
tracers of ftrace.
+config MMIOTRACE
+ bool "Memory mapped IO tracing"
+ depends on HAVE_MMIOTRACE_SUPPORT && DEBUG_KERNEL && PCI
+ select TRACING
+ help
+ Mmiotrace traces Memory Mapped I/O access and is meant for
+ debugging and reverse engineering. It is called from the ioremap
+ implementation and works via page faults. Tracing is disabled by
+ default and can be enabled at run-time.
+
+ See Documentation/tracers/mmiotrace.txt.
+ If you are not helping to develop drivers, say N.
+
+config MMIOTRACE_TEST
+ tristate "Test module for mmiotrace"
+ depends on MMIOTRACE && m
+ help
+ This is a dumb module for testing mmiotrace. It is very dangerous
+ as it will write garbage to IO memory starting at a given address.
+ However, it should be safe to use on e.g. unused portion of VRAM.
+
+ Say N, unless you absolutely know what you are doing.
+
endmenu
#include <linux/kernel.h>
#include <linux/mmiotrace.h>
#include <linux/pci.h>
+#include <asm/atomic.h>
#include "trace.h"
static struct trace_array *mmio_trace_array;
static bool overrun_detected;
static unsigned long prev_overruns;
+static atomic_t dropped_count;
static void mmio_reset_data(struct trace_array *tr)
{
static unsigned long count_overruns(struct trace_iterator *iter)
{
- unsigned long cnt = 0;
+ unsigned long cnt = atomic_xchg(&dropped_count, 0);
unsigned long over = ring_buffer_overruns(iter->tr->buffer);
if (over > prev_overruns)
- cnt = over - prev_overruns;
+ cnt += over - prev_overruns;
prev_overruns = over;
return cnt;
}
event = ring_buffer_lock_reserve(tr->buffer, sizeof(*entry),
&irq_flags);
- if (!event)
+ if (!event) {
+ atomic_inc(&dropped_count);
return;
+ }
entry = ring_buffer_event_data(event);
tracing_generic_entry_update(&entry->ent, 0, preempt_count());
entry->ent.type = TRACE_MMIO_RW;
event = ring_buffer_lock_reserve(tr->buffer, sizeof(*entry),
&irq_flags);
- if (!event)
+ if (!event) {
+ atomic_inc(&dropped_count);
return;
+ }
entry = ring_buffer_event_data(event);
tracing_generic_entry_update(&entry->ent, 0, preempt_count());
entry->ent.type = TRACE_MMIO_MAP;
return buffer;
}
-void free_locked_buffer(void *buffer, size_t size)
+void release_locked_buffer(void *buffer, size_t size)
{
unsigned long pgsz = PAGE_ALIGN(size) >> PAGE_SHIFT;
current->mm->locked_vm -= pgsz;
up_write(¤t->mm->mmap_sem);
+}
+
+void free_locked_buffer(void *buffer, size_t size)
+{
+ release_locked_buffer(buffer, size);
kfree(buffer);
}
}
EXPORT_SYMBOL_GPL(bdi_writeout_inc);
-static inline void task_dirty_inc(struct task_struct *tsk)
+void task_dirty_inc(struct task_struct *tsk)
{
prop_inc_single(&vm_dirties, &tsk->dirties);
}
__inc_zone_page_state(page, NR_FILE_DIRTY);
__inc_bdi_stat(mapping->backing_dev_info,
BDI_RECLAIMABLE);
+ task_dirty_inc(current);
task_io_account_write(PAGE_CACHE_SIZE);
}
radix_tree_tag_set(&mapping->page_tree,
* If the mapping doesn't provide a set_page_dirty a_op, then
* just fall through and assume that it wants buffer_heads.
*/
-static int __set_page_dirty(struct page *page)
+int set_page_dirty(struct page *page)
{
struct address_space *mapping = page_mapping(page);
}
return 0;
}
-
-int set_page_dirty(struct page *page)
-{
- int ret = __set_page_dirty(page);
- if (ret)
- task_dirty_inc(current);
- return ret;
-}
EXPORT_SYMBOL(set_page_dirty);
/*
* was used and there are no special requirements, this is a convenient
* alternative
*/
-int __meminit early_pfn_to_nid(unsigned long pfn)
+int __meminit __early_pfn_to_nid(unsigned long pfn)
{
int i;
if (start_pfn <= pfn && pfn < end_pfn)
return early_node_map[i].nid;
}
+ /* This is a memory hole */
+ return -1;
+}
+#endif /* CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID */
+
+int __meminit early_pfn_to_nid(unsigned long pfn)
+{
+ int nid;
+ nid = __early_pfn_to_nid(pfn);
+ if (nid >= 0)
+ return nid;
+ /* just returns 0 */
return 0;
}
-#endif /* CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID */
+
+#ifdef CONFIG_NODES_SPAN_OTHER_NODES
+bool __meminit early_pfn_in_nid(unsigned long pfn, int node)
+{
+ int nid;
+
+ nid = __early_pfn_to_nid(pfn);
+ if (nid >= 0 && nid != node)
+ return false;
+ return true;
+}
+#endif
/* Basic iterator support to walk early_node_map[] */
#define for_each_active_range_index_in_nid(i, nid) \
}
EXPORT_SYMBOL_GPL(__get_vm_area);
+struct vm_struct *__get_vm_area_caller(unsigned long size, unsigned long flags,
+ unsigned long start, unsigned long end,
+ void *caller)
+{
+ return __get_vm_area_node(size, flags, start, end, -1, GFP_KERNEL,
+ caller);
+}
+
/**
* get_vm_area - reserve a contiguous kernel virtual area
* @size: size of the area
while (<>) {
my $line = $_;
- if ($line =~ /([0-9\.]+)\] calling ([a-zA-Z0-9\_]+)\+/) {
+ if ($line =~ /([0-9\.]+)\] calling ([a-zA-Z0-9\_\.]+)\+/) {
my $func = $2;
if ($done == 0) {
$start{$func} = $1;
$count = $count + 1;
}
- if ($line =~ /([0-9\.]+)\] initcall ([a-zA-Z0-9\_]+)\+.*returned/) {
+ if ($line =~ /([0-9\.]+)\] initcall ([a-zA-Z0-9\_\.]+)\+.*returned/) {
if ($done == 0) {
$end{$2} = $1;
$maxtime = $1;
-#!/usr/bin/perl -w
+#!/usr/bin/perl
use File::Basename;
my $target = "0";
my $function;
my $module = "";
-my $func_offset;
+my $func_offset = 0;
my $vmaoffset = 0;
+my %regs;
+
+
+sub parse_x86_regs
+{
+ my ($line) = @_;
+ if ($line =~ /EAX: ([0-9a-f]+) EBX: ([0-9a-f]+) ECX: ([0-9a-f]+) EDX: ([0-9a-f]+)/) {
+ $regs{"%eax"} = $1;
+ $regs{"%ebx"} = $2;
+ $regs{"%ecx"} = $3;
+ $regs{"%edx"} = $4;
+ }
+ if ($line =~ /ESI: ([0-9a-f]+) EDI: ([0-9a-f]+) EBP: ([0-9a-f]+) ESP: ([0-9a-f]+)/) {
+ $regs{"%esi"} = $1;
+ $regs{"%edi"} = $2;
+ $regs{"%esp"} = $4;
+ }
+ if ($line =~ /RAX: ([0-9a-f]+) RBX: ([0-9a-f]+) RCX: ([0-9a-f]+)/) {
+ $regs{"%eax"} = $1;
+ $regs{"%ebx"} = $2;
+ $regs{"%ecx"} = $3;
+ }
+ if ($line =~ /RDX: ([0-9a-f]+) RSI: ([0-9a-f]+) RDI: ([0-9a-f]+)/) {
+ $regs{"%edx"} = $1;
+ $regs{"%esi"} = $2;
+ $regs{"%edi"} = $3;
+ }
+ if ($line =~ /RBP: ([0-9a-f]+) R08: ([0-9a-f]+) R09: ([0-9a-f]+)/) {
+ $regs{"%r08"} = $2;
+ $regs{"%r09"} = $3;
+ }
+ if ($line =~ /R10: ([0-9a-f]+) R11: ([0-9a-f]+) R12: ([0-9a-f]+)/) {
+ $regs{"%r10"} = $1;
+ $regs{"%r11"} = $2;
+ $regs{"%r12"} = $3;
+ }
+ if ($line =~ /R13: ([0-9a-f]+) R14: ([0-9a-f]+) R15: ([0-9a-f]+)/) {
+ $regs{"%r13"} = $1;
+ $regs{"%r14"} = $2;
+ $regs{"%r15"} = $3;
+ }
+}
+
+sub reg_name
+{
+ my ($reg) = @_;
+ $reg =~ s/r(.)x/e\1x/;
+ $reg =~ s/r(.)i/e\1i/;
+ $reg =~ s/r(.)p/e\1p/;
+ return $reg;
+}
+
+sub process_x86_regs
+{
+ my ($line, $cntr) = @_;
+ my $str = "";
+ if (length($line) < 40) {
+ return ""; # not an asm istruction
+ }
+
+ # find the arguments to the instruction
+ if ($line =~ /([0-9a-zA-Z\,\%\(\)\-\+]+)$/) {
+ $lastword = $1;
+ } else {
+ return "";
+ }
+
+ # we need to find the registers that get clobbered,
+ # since their value is no longer relevant for previous
+ # instructions in the stream.
+
+ $clobber = $lastword;
+ # first, remove all memory operands, they're read only
+ $clobber =~ s/\([a-z0-9\%\,]+\)//g;
+ # then, remove everything before the comma, thats the read part
+ $clobber =~ s/.*\,//g;
+
+ # if this is the instruction that faulted, we haven't actually done
+ # the write yet... nothing is clobbered.
+ if ($cntr == 0) {
+ $clobber = "";
+ }
+
+ foreach $reg (keys(%regs)) {
+ my $clobberprime = reg_name($clobber);
+ my $lastwordprime = reg_name($lastword);
+ my $val = $regs{$reg};
+ if ($val =~ /^[0]+$/) {
+ $val = "0";
+ } else {
+ $val =~ s/^0*//;
+ }
+
+ # first check if we're clobbering this register; if we do
+ # we print it with a =>, and then delete its value
+ if ($clobber =~ /$reg/ || $clobberprime =~ /$reg/) {
+ if (length($val) > 0) {
+ $str = $str . " $reg => $val ";
+ }
+ $regs{$reg} = "";
+ $val = "";
+ }
+ # now check if we're reading this register
+ if ($lastword =~ /$reg/ || $lastwordprime =~ /$reg/) {
+ if (length($val) > 0) {
+ $str = $str . " $reg = $val ";
+ }
+ }
+ }
+ return $str;
+}
+
+# parse the oops
while (<STDIN>) {
my $line = $_;
if ($line =~ /EIP: 0060:\[\<([a-z0-9]+)\>\]/) {
$target = $1;
}
+ if ($line =~ /RIP: 0010:\[\<([a-z0-9]+)\>\]/) {
+ $target = $1;
+ }
if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) {
$function = $1;
$func_offset = $2;
}
+ if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\] \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) {
+ $function = $1;
+ $func_offset = $2;
+ }
# check if it's a module
if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]+\W\[([a-zA-Z0-9\_\-]+)\]/) {
$module = $3;
}
+ if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\] \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]+\W\[([a-zA-Z0-9\_\-]+)\]/) {
+ $module = $3;
+ }
+ parse_x86_regs($line);
}
my $decodestart = hex($target) - hex($func_offset);
-my $decodestop = $decodestart + 8192;
+my $decodestop = hex($target) + 8192;
if ($target eq "0") {
print "No oops found!\n";
print "Usage: \n";
my $state = 0;
my $center = 0;
my @lines;
+my @reglines;
sub InRange {
my ($address, $target) = @_;
my $i;
-my $fulltext = "";
+
+# start annotating the registers in the asm.
+# this goes from the oopsing point back, so that the annotator
+# can track (opportunistically) which registers got written and
+# whos value no longer is relevant.
+
+$i = $center;
+while ($i >= $start) {
+ $reglines[$i] = process_x86_regs($lines[$i], $center - $i);
+ $i = $i - 1;
+}
+
$i = $start;
while ($i < $finish) {
+ my $line;
if ($i == $center) {
- $fulltext = $fulltext . "*$lines[$i] <----- faulting instruction\n";
+ $line = "*$lines[$i] ";
} else {
- $fulltext = $fulltext . " $lines[$i]\n";
+ $line = " $lines[$i] ";
+ }
+ print $line;
+ if (defined($reglines[$i]) && length($reglines[$i]) > 0) {
+ my $c = 60 - length($line);
+ while ($c > 0) { print " "; $c = $c - 1; };
+ print "| $reglines[$i]";
}
+ if ($i == $center) {
+ print "<--- faulting instruction";
+ }
+ print "\n";
$i = $i +1;
}
-print $fulltext;
-
static int do_hid_entry(const char *filename,
struct hid_device_id *id, char *alias)
{
+ id->bus = TO_NATIVE(id->bus);
id->vendor = TO_NATIVE(id->vendor);
id->product = TO_NATIVE(id->product);
echo 'cp System.map $RPM_BUILD_ROOT'"/boot/System.map-$KERNELRELEASE"
echo 'cp .config $RPM_BUILD_ROOT'"/boot/config-$KERNELRELEASE"
+
+echo "%ifnarch ppc64"
+echo 'cp vmlinux vmlinux.orig'
+echo 'bzip2 -9 vmlinux'
+echo 'mv vmlinux.bz2 $RPM_BUILD_ROOT'"/boot/vmlinux-$KERNELRELEASE.bz2"
+echo 'mv vmlinux.orig vmlinux'
+echo "%endif"
+
echo ""
echo "%clean"
echo '#echo -rf $RPM_BUILD_ROOT'
# Check for svn and a svn repo.
if rev=`svn info 2>/dev/null | grep '^Last Changed Rev'`; then
rev=`echo $rev | awk '{print $NF}'`
- changes=`svn status 2>/dev/null | grep '^[AMD]' | wc -l`
-
- # Are there uncommitted changes?
- if [ $changes != 0 ]; then
- printf -- '-svn%s%s' "$rev" -dirty
- else
- printf -- '-svn%s' "$rev"
- fi
+ printf -- '-svn%s' "$rev"
# All done with svn
exit
all_kconfigs()
{
- find_sources $ALLSOURCE_ARCHS 'Kconfig*'
+ for arch in $ALLSOURCE_ARCHS; do
+ find_sources $arch 'Kconfig*'
+ done
+ find_other_sources 'Kconfig*'
}
all_defconfigs()
-I ____cacheline_internodealigned_in_smp \
-I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL \
--extra=+f --c-kinds=+px \
- --regex-asm='/^ENTRY\(([^)]*)\).*/\1/'
+ --regex-asm='/^ENTRY\(([^)]*)\).*/\1/' \
+ --regex-c='/^SYSCALL_DEFINE[[:digit:]]?\(([^,)]*).*/sys_\1/'
all_kconfigs | xargs $1 -a \
--langdef=kconfig --language-force=kconfig \
emacs()
{
- all_sources | xargs $1 -a
+ all_sources | xargs $1 -a \
+ --regex='/^ENTRY(\([^)]*\)).*/\1/' \
+ --regex='/^SYSCALL_DEFINE[0-9]?(\([^,)]*\).*/sys_\1/'
all_kconfigs | xargs $1 -a \
--regex='/^[ \t]*\(\(menu\)*config\)[ \t]+\([a-zA-Z0-9_]+\)/\3/'
{
int i, r = 0;
- down_read(&kvm->slots_lock);
for (i = 0; i < kvm->nmemslots; i++) {
r = kvm_iommu_map_pages(kvm, kvm->memslots[i].base_gfn,
kvm->memslots[i].npages);
if (r)
break;
}
- up_read(&kvm->slots_lock);
+
return r;
}
static int kvm_iommu_unmap_memslots(struct kvm *kvm)
{
int i;
- down_read(&kvm->slots_lock);
+
for (i = 0; i < kvm->nmemslots; i++) {
kvm_iommu_put_pages(kvm, kvm->memslots[i].base_gfn,
kvm->memslots[i].npages);
}
- up_read(&kvm->slots_lock);
return 0;
}
assigned_dev->host_irq_disabled = false;
}
mutex_unlock(&assigned_dev->kvm->lock);
- kvm_put_kvm(assigned_dev->kvm);
}
static irqreturn_t kvm_assigned_dev_intr(int irq, void *dev_id)
struct kvm_assigned_dev_kernel *assigned_dev =
(struct kvm_assigned_dev_kernel *) dev_id;
- kvm_get_kvm(assigned_dev->kvm);
-
schedule_work(&assigned_dev->interrupt_work);
disable_irq_nosync(irq);
}
}
+/* The function implicit hold kvm->lock mutex due to cancel_work_sync() */
static void kvm_free_assigned_irq(struct kvm *kvm,
struct kvm_assigned_dev_kernel *assigned_dev)
{
if (!assigned_dev->irq_requested_type)
return;
- if (cancel_work_sync(&assigned_dev->interrupt_work))
- /* We had pending work. That means we will have to take
- * care of kvm_put_kvm.
- */
- kvm_put_kvm(kvm);
+ /*
+ * In kvm_free_device_irq, cancel_work_sync return true if:
+ * 1. work is scheduled, and then cancelled.
+ * 2. work callback is executed.
+ *
+ * The first one ensured that the irq is disabled and no more events
+ * would happen. But for the second one, the irq may be enabled (e.g.
+ * for MSI). So we disable irq here to prevent further events.
+ *
+ * Notice this maybe result in nested disable if the interrupt type is
+ * INTx, but it's OK for we are going to free it.
+ *
+ * If this function is a part of VM destroy, please ensure that till
+ * now, the kvm state is still legal for probably we also have to wait
+ * interrupt_work done.
+ */
+ disable_irq_nosync(assigned_dev->host_irq);
+ cancel_work_sync(&assigned_dev->interrupt_work);
free_irq(assigned_dev->host_irq, (void *)assigned_dev);
if (irqchip_in_kernel(kvm)) {
if (!msi2intx &&
- adev->irq_requested_type & KVM_ASSIGNED_DEV_HOST_MSI) {
- free_irq(adev->host_irq, (void *)kvm);
+ (adev->irq_requested_type & KVM_ASSIGNED_DEV_HOST_MSI)) {
+ free_irq(adev->host_irq, (void *)adev);
pci_disable_msi(adev->dev);
}
struct kvm_assigned_dev_kernel *match;
struct pci_dev *dev;
+ down_read(&kvm->slots_lock);
mutex_lock(&kvm->lock);
match = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head,
out:
mutex_unlock(&kvm->lock);
+ up_read(&kvm->slots_lock);
return r;
out_list_del:
list_del(&match->list);
out_free:
kfree(match);
mutex_unlock(&kvm->lock);
+ up_read(&kvm->slots_lock);
return r;
}
#endif
return young;
}
+static void kvm_mmu_notifier_release(struct mmu_notifier *mn,
+ struct mm_struct *mm)
+{
+ struct kvm *kvm = mmu_notifier_to_kvm(mn);
+ kvm_arch_flush_shadow(kvm);
+}
+
static const struct mmu_notifier_ops kvm_mmu_notifier_ops = {
.invalidate_page = kvm_mmu_notifier_invalidate_page,
.invalidate_range_start = kvm_mmu_notifier_invalidate_range_start,
.invalidate_range_end = kvm_mmu_notifier_invalidate_range_end,
.clear_flush_young = kvm_mmu_notifier_clear_flush_young,
+ .release = kvm_mmu_notifier_release,
};
#endif /* CONFIG_MMU_NOTIFIER && KVM_ARCH_WANT_MMU_NOTIFIER */
{
struct mm_struct *mm = kvm->mm;
+ kvm_arch_sync_events(kvm);
spin_lock(&kvm_lock);
list_del(&kvm->vm_list);
spin_unlock(&kvm_lock);
git.openpandora.org / pandora-kernel.git / commitdiff