*/
#define IEEE80211_RATE_IDX_ENTRY(val, idx) (((val&(0xff<<(idx*8)))>>(idx*8)))
-#define SHORT_PRE 1
-#define LONG_PRE 0
-
#define WLAN_PHY_HT_20_SS WLAN_RC_PHY_HT_20_SS
#define WLAN_PHY_HT_20_DS WLAN_RC_PHY_HT_20_DS
#define WLAN_PHY_HT_20_DS_HGI WLAN_RC_PHY_HT_20_DS_HGI
WLAN_RC_PHY_MAX
};
-#define WLAN_RC_PHY_DS(_phy) ((_phy == WLAN_RC_PHY_HT_20_DS) \
- || (_phy == WLAN_RC_PHY_HT_40_DS) \
- || (_phy == WLAN_RC_PHY_HT_20_DS_HGI) \
- || (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
-#define WLAN_RC_PHY_40(_phy) ((_phy == WLAN_RC_PHY_HT_40_SS) \
- || (_phy == WLAN_RC_PHY_HT_40_DS) \
- || (_phy == WLAN_RC_PHY_HT_40_SS_HGI) \
- || (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
+#define WLAN_RC_PHY_DS(_phy) ((_phy == WLAN_RC_PHY_HT_20_DS) \
+ || (_phy == WLAN_RC_PHY_HT_40_DS) \
+ || (_phy == WLAN_RC_PHY_HT_20_DS_HGI) \
+ || (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
+#define WLAN_RC_PHY_40(_phy) ((_phy == WLAN_RC_PHY_HT_40_SS) \
+ || (_phy == WLAN_RC_PHY_HT_40_DS) \
+ || (_phy == WLAN_RC_PHY_HT_40_SS_HGI) \
+ || (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
#define WLAN_RC_PHY_SGI(_phy) ((_phy == WLAN_RC_PHY_HT_20_SS_HGI) \
- || (_phy == WLAN_RC_PHY_HT_20_DS_HGI) \
- || (_phy == WLAN_RC_PHY_HT_40_SS_HGI) \
- || (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
+ || (_phy == WLAN_RC_PHY_HT_20_DS_HGI) \
+ || (_phy == WLAN_RC_PHY_HT_40_SS_HGI) \
+ || (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
#define WLAN_RC_PHY_HT(_phy) (_phy >= WLAN_RC_PHY_HT_20_SS)
#define WLAN_RC_SGI_FLAG (0x04)
#define WLAN_RC_HT_FLAG (0x08)
-/* Index into the rate table */
-#define INIT_RATE_MAX_20 23
-#define INIT_RATE_MAX_40 40
-
#define RATE_TABLE_SIZE 64
-/* XXX: Convert to kdoc */
+/**
+ * struct ath_rate_table - Rate Control table
+ * @valid: valid for use in rate control
+ * @valid_single_stream: valid for use in rate control for
+ * single stream operation
+ * @phy: CCK/OFDM
+ * @ratekbps: rate in Kbits per second
+ * @user_ratekbps: user rate in Kbits per second
+ * @ratecode: rate that goes into HW descriptors
+ * @short_preamble: Mask for enabling short preamble in ratecode for CCK
+ * @dot11rate: value that goes into supported
+ * rates info element of MLME
+ * @ctrl_rate: Index of next lower basic rate, used for duration computation
+ * @max_4ms_framelen: maximum frame length(bytes) for tx duration
+ * @probe_interval: interval for rate control to probe for other rates
+ * @rssi_reduce_interval: interval for rate control to reduce rssi
+ * @initial_ratemax: initial ratemax value used in ath_rc_sib_update()
+ */
struct ath_rate_table {
int rate_cnt;
struct {
- int valid; /* Valid for use in rate control */
- int valid_single_stream;/* Valid for use in rate control
- for single stream operation */
- u8 phy; /* CCK/OFDM/TURBO/XR */
- u32 ratekbps; /* Rate in Kbits per second */
- u32 user_ratekbps; /* User rate in KBits per second */
- u8 ratecode; /* rate that goes into
- hw descriptors */
- u8 short_preamble; /* Mask for enabling short preamble
- in rate code for CCK */
- u8 dot11rate; /* Value that goes into supported
- rates info element of MLME */
- u8 ctrl_rate; /* Index of next lower basic rate,
- used for duration computation */
- int8_t rssi_ack_validmin; /* Rate control related */
- int8_t rssi_ack_deltamin; /* Rate control related */
- u8 base_index; /* base rate index */
- u8 cw40index; /* 40cap rate index */
- u8 sgi_index; /* shortgi rate index */
- u8 ht_index; /* shortgi rate index */
- u32 max_4ms_framelen; /* Maximum frame length(bytes)
- for 4ms tx duration */
+ int valid;
+ int valid_single_stream;
+ u8 phy;
+ u32 ratekbps;
+ u32 user_ratekbps;
+ u8 ratecode;
+ u8 short_preamble;
+ u8 dot11rate;
+ u8 ctrl_rate;
+ int8_t rssi_ack_validmin;
+ int8_t rssi_ack_deltamin;
+ u8 base_index;
+ u8 cw40index;
+ u8 sgi_index;
+ u8 ht_index;
+ u32 max_4ms_framelen;
} info[RATE_TABLE_SIZE];
- u32 probe_interval; /* interval for ratectrl to
- probe for other rates */
- u32 rssi_reduce_interval; /* interval for ratectrl
- to reduce RSSI */
- u8 initial_ratemax; /* the initial ratemax value used
- in ath_rc_sib_update() */
+ u32 probe_interval;
+ u32 rssi_reduce_interval;
+ u8 initial_ratemax;
};
#define ATH_RC_PROBE_ALLOWED 0x00000001
#define ATH_RC_MINRATE_LASTRATE 0x00000002
-#define ATH_RC_SHORT_PREAMBLE 0x00000004
struct ath_rc_series {
- u8 rix;
- u8 tries;
- u8 flags;
- u32 max_4ms_framelen;
+ u8 rix;
+ u8 tries;
+ u8 flags;
+ u32 max_4ms_framelen;
};
/* rcs_flags definition */
#define MAX_TX_RATE_PHY 48
struct ath_tx_ratectrl_state {
- int8_t rssi_thres; /* required rssi for this rate (dB) */
- u8 per; /* recent estimate of packet error rate (%) */
+ int8_t rssi_thres; /* required rssi for this rate (dB) */
+ u8 per; /* recent estimate of packet error rate (%) */
};
+/**
+ * struct ath_tx_ratectrl - TX Rate control Information
+ * @state: RC state
+ * @rssi_last: last ACK rssi
+ * @rssi_last_lookup: last ACK rssi used for lookup
+ * @rssi_last_prev: previous last ACK rssi
+ * @rssi_last_prev2: 2nd previous last ACK rssi
+ * @rssi_sum_cnt: count of rssi_sum for averaging
+ * @rssi_sum_rate: rate that we are averaging
+ * @rssi_sum: running sum of rssi for averaging
+ * @probe_rate: rate we are probing at
+ * @rssi_time: msec timestamp for last ack rssi
+ * @rssi_down_time: msec timestamp for last down step
+ * @probe_time: msec timestamp for last probe
+ * @hw_maxretry_pktcnt: num of packets since we got HW max retry error
+ * @max_valid_rate: maximum number of valid rate
+ * @per_down_time: msec timestamp for last PER down step
+ * @valid_phy_ratecnt: valid rate count
+ * @rate_max_phy: phy index for the max rate
+ * @probe_interval: interval for ratectrl to probe for other rates
+ */
struct ath_tx_ratectrl {
- struct ath_tx_ratectrl_state state[MAX_TX_RATE_TBL]; /* state */
- int8_t rssi_last; /* last ack rssi */
- int8_t rssi_last_lookup; /* last ack rssi used for lookup */
- int8_t rssi_last_prev; /* previous last ack rssi */
- int8_t rssi_last_prev2; /* 2nd previous last ack rssi */
- int32_t rssi_sum_cnt; /* count of rssi_sum for averaging */
- int32_t rssi_sum_rate; /* rate that we are averaging */
- int32_t rssi_sum; /* running sum of rssi for averaging */
- u32 valid_txrate_mask; /* mask of valid rates */
- u8 rate_table_size; /* rate table size */
- u8 rate_max; /* max rate that has recently worked */
- u8 probe_rate; /* rate we are probing at */
- u32 rssi_time; /* msec timestamp for last ack rssi */
- u32 rssi_down_time; /* msec timestamp for last down step */
- u32 probe_time; /* msec timestamp for last probe */
- u8 hw_maxretry_pktcnt; /* num packets since we got
- HW max retry error */
- u8 max_valid_rate; /* maximum number of valid rate */
- u8 valid_rate_index[MAX_TX_RATE_TBL]; /* valid rate index */
- u32 per_down_time; /* msec timstamp for last
- PER down step */
+ struct ath_tx_ratectrl_state state[MAX_TX_RATE_TBL];
+ int8_t rssi_last;
+ int8_t rssi_last_lookup;
+ int8_t rssi_last_prev;
+ int8_t rssi_last_prev2;
+ int32_t rssi_sum_cnt;
+ int32_t rssi_sum_rate;
+ int32_t rssi_sum;
+ u8 rate_table_size;
+ u8 probe_rate;
+ u32 rssi_time;
+ u32 rssi_down_time;
+ u32 probe_time;
+ u8 hw_maxretry_pktcnt;
+ u8 max_valid_rate;
+ u8 valid_rate_index[MAX_TX_RATE_TBL];
+ u32 per_down_time;
/* 11n state */
- u8 valid_phy_ratecnt[WLAN_RC_PHY_MAX]; /* valid rate count */
- u8 valid_phy_rateidx[WLAN_RC_PHY_MAX][MAX_TX_RATE_TBL];
- u8 rc_phy_mode;
- u8 rate_max_phy; /* Phy index for the max rate */
- u32 rate_max_lastused; /* msec timstamp of when we
- last used rateMaxPhy */
- u32 probe_interval; /* interval for ratectrl to probe
- for other rates */
+ u8 valid_phy_ratecnt[WLAN_RC_PHY_MAX];
+ u8 valid_phy_rateidx[WLAN_RC_PHY_MAX][MAX_TX_RATE_TBL];
+ u8 rc_phy_mode;
+ u8 rate_max_phy;
+ u32 probe_interval;
};
struct ath_rateset {
struct ath_rate_softc {
/* phy tables that contain rate control data */
const void *hw_rate_table[ATH9K_MODE_MAX];
- int fixedrix; /* -1 or index of fixed rate */
+
+ /* -1 or index of fixed rate */
+ int fixedrix;
};
/* per-node state */
struct ath_rate_node {
- struct ath_tx_ratectrl tx_ratectrl; /* rate control state proper */
- u32 prev_data_rix; /* rate idx of last data frame */
+ struct ath_tx_ratectrl tx_ratectrl;
- /* map of rate ix -> negotiated rate set ix */
- u8 rixmap[MAX_TX_RATE_TBL];
+ /* rate idx of last data frame */
+ u32 prev_data_rix;
- /* map of ht rate ix -> negotiated rate set ix */
- u8 ht_rixmap[MAX_TX_RATE_TBL];
+ /* ht capabilities */
+ u8 ht_cap;
- u8 ht_cap; /* ht capabilities */
- u8 ant_tx; /* current transmit antenna */
+ /* When TRUE, only single stream Tx possible */
+ u8 single_stream;
- u8 single_stream; /* When TRUE, only single
- stream Tx possible */
- struct ath_rateset neg_rates; /* Negotiated rates */
- struct ath_rateset neg_ht_rates; /* Negotiated HT rates */
- struct ath_rate_softc *asc; /* back pointer to atheros softc */
- struct ath_vap *avp; /* back pointer to vap */
+ /* Negotiated rates */
+ struct ath_rateset neg_rates;
+
+ /* Negotiated HT rates */
+ struct ath_rateset neg_ht_rates;
+
+ struct ath_rate_softc *asc;
+ struct ath_vap *avp;
};
/* Driver data of ieee80211_tx_info */
void ath_rc_node_update(struct ieee80211_hw *hw, struct ath_rate_node *rc_priv);
void ath_rate_newstate(struct ath_softc *sc, struct ath_vap *avp);
-/*
- * Return the tx rate series.
- */
-void ath_rate_findrate(struct ath_softc *sc, struct ath_rate_node *ath_rc_priv,
- int num_tries, int num_rates,
- unsigned int rcflag, struct ath_rc_series[],
- int *is_probe, int isretry);
/*
* Return rate index for given Dot11 Rate.
*/
u8 ath_rate_findrateix(struct ath_softc *sc,
- u8 dot11_rate);
+ u8 dot11_rate);
/* Routines to register/unregister rate control algorithm */
int ath_rate_control_register(void);
git.openpandora.org / pandora-kernel.git / commitdiff