m68knommu: move UART addressing to part specific includes

The ColdFire UART base addresses varies between the different ColdFire
family members. Instead of keeping the base addresses with the UART
definitions keep them with the other addresses definitions for each
ColdFire part.

The motivation for this move is so that when we add new ColdFire
part definitions, they are all in a single file (and we shouldn't
normally need to modify the UART definitions in mcfuart.h at all).

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

diff --git a/arch/m68k/include/asm/m5206sim.h b/arch/m68k/include/asm/m5206sim.h
index b882a21..aa7ee48 100644 (file)
--- a/arch/m68k/include/asm/m5206sim.h
+++ b/arch/m68k/include/asm/m5206sim.h
@@ -90,6 +90,14 @@
 #define        MCFSIM_PADDR            (MCF_MBAR + 0x1c5)      /* Parallel Direction (r/w) */
 #define        MCFSIM_PADAT            (MCF_MBAR + 0x1c9)      /* Parallel Port Value (r/w) */
 
+#if defined(CONFIG_NETtel)
+#define        MCFUART_BASE1           0x180           /* Base address of UART1 */
+#define        MCFUART_BASE2           0x140           /* Base address of UART2 */
+#else
+#define        MCFUART_BASE1           0x140           /* Base address of UART1 */
+#define        MCFUART_BASE2           0x180           /* Base address of UART2 */
+#endif
+
 /*
  *     Define system peripheral IRQ usage.
  */
@@ -97,7 +105,7 @@
 #define        MCF_IRQ_PROFILER        31              /* Timer1, Level 7 */
 
 /*
- * Generic GPIO
+ *     Generic GPIO
  */
 #define MCFGPIO_PIN_MAX                8
 #define MCFGPIO_IRQ_VECBASE    -1

diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
index 85b39ed..8cd8bce 100644 (file)
--- a/arch/m68k/include/asm/m520xsim.h
+++ b/arch/m68k/include/asm/m520xsim.h
@@ -100,6 +100,7 @@
 #define MCFGPIO_PCLRR_UART             0xFC0A402A
 #define MCFGPIO_PCLRR_FECH             0xFC0A402B
 #define MCFGPIO_PCLRR_FECL             0xFC0A402C
+
 /*
  * Generic GPIO support
  */
@@ -112,7 +113,6 @@
 #define MCFGPIO_PIN_MAX                        80
 #define MCFGPIO_IRQ_MAX                        8
 #define MCFGPIO_IRQ_VECBASE            MCFINT_VECBASE
-/****************************************************************************/
 
 #define MCF_GPIO_PAR_UART                   (0xA4036)
 #define MCF_GPIO_PAR_FECI2C                 (0xA4033)
@@ -128,6 +128,13 @@
 #define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2   (0x02)
 #define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2   (0x04)
 
+/*
+ *  UART module.
+ */
+#define MCFUART_BASE1          0x60000         /* Base address of UART1 */
+#define MCFUART_BASE2          0x64000         /* Base address of UART2 */
+#define MCFUART_BASE3          0x68000         /* Base address of UART2 */
+
 /*
  *  Reset Controll Unit.
  */

diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h
index 9d597dc..4ec0f93 100644 (file)
--- a/arch/m68k/include/asm/m523xsim.h
+++ b/arch/m68k/include/asm/m523xsim.h
@@ -52,6 +52,13 @@
 #define        MCF_RCR_SWRESET         0x80            /* Software reset bit */
 #define        MCF_RCR_FRCSTOUT        0x40            /* Force external reset */
 
+/*
+ *  UART module.
+ */
+#define MCFUART_BASE1          0x200           /* Base address of UART1 */
+#define MCFUART_BASE2          0x240           /* Base address of UART2 */
+#define MCFUART_BASE3          0x280           /* Base address of UART3 */
+
 #define MCFGPIO_PODR_ADDR      (MCF_IPSBAR + 0x100000)
 #define MCFGPIO_PODR_DATAH     (MCF_IPSBAR + 0x100001)
 #define MCFGPIO_PODR_DATAL     (MCF_IPSBAR + 0x100002)

diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
index c107228..21d0bbf 100644 (file)
--- a/arch/m68k/include/asm/m5249sim.h
+++ b/arch/m68k/include/asm/m5249sim.h
@@ -59,6 +59,11 @@
 #define MCFSIM_DACR1           0x110           /* DRAM 1 Addr and Ctrl (r/w) */
 #define MCFSIM_DMR1            0x114           /* DRAM 1 Mask reg (r/w) */
 
+/*
+ *     UART module.
+ */
+#define MCFUART_BASE1          0x1c0           /* Base address of UART1 */
+#define MCFUART_BASE2          0x200           /* Base address of UART2 */
 
 /*
  *     Some symbol defines for the above...

diff --git a/arch/m68k/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h
index 8cea714..974c448 100644 (file)
--- a/arch/m68k/include/asm/m5272sim.h
+++ b/arch/m68k/include/asm/m5272sim.h
@@ -65,6 +65,9 @@
 #define        MCFSIM_DCMR1            0x5c            /* DRAM 1 Mask reg (r/w) */
 #define        MCFSIM_DCCR1            0x63            /* DRAM 1 Control reg (r/w) */
 
+#define        MCFUART_BASE1           0x100           /* Base address of UART1 */
+#define        MCFUART_BASE2           0x140           /* Base address of UART2 */
+
 #define        MCFSIM_PACNT            (MCF_MBAR + 0x80) /* Port A Control (r/w) */
 #define        MCFSIM_PADDR            (MCF_MBAR + 0x84) /* Port A Direction (r/w) */
 #define        MCFSIM_PADAT            (MCF_MBAR + 0x86) /* Port A Data (r/w) */

diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h
index 5223b71..8a5a1ab 100644 (file)
--- a/arch/m68k/include/asm/m527xsim.h
+++ b/arch/m68k/include/asm/m527xsim.h
@@ -58,6 +58,12 @@
 #define        MCFSIM_DMR1             0x5c            /* SDRAM address mask 1 */
 #endif
 
+/*
+ *     UART module.
+ */
+#define MCFUART_BASE1          0x200           /* Base address of UART1 */
+#define MCFUART_BASE2          0x240           /* Base address of UART2 */
+#define MCFUART_BASE3          0x280           /* Base address of UART3 */
 
 #ifdef CONFIG_M5271
 #define MCFGPIO_PODR_ADDR      (MCF_IPSBAR + 0x100000)

diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h
index 4e35f97..47c851e 100644 (file)
--- a/arch/m68k/include/asm/m528xsim.h
+++ b/arch/m68k/include/asm/m528xsim.h
@@ -43,6 +43,13 @@
 #define        MCFSIM_DACR1            0x50            /* SDRAM base address 1 */
 #define        MCFSIM_DMR1             0x54            /* SDRAM address mask 1 */
 
+/*
+ *     UART module.
+ */
+#define MCFUART_BASE1          0x200           /* Base address of UART1 */
+#define MCFUART_BASE2          0x240           /* Base address of UART2 */
+#define MCFUART_BASE3          0x280           /* Base address of UART3 */
+
 /*
  *     GPIO registers
  */

diff --git a/arch/m68k/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h
index 008f36b..7003d72 100644 (file)
--- a/arch/m68k/include/asm/m5307sim.h
+++ b/arch/m68k/include/asm/m5307sim.h
@@ -96,6 +96,17 @@
 #define        MCFSIM_PADDR            (MCF_MBAR + 0x244)
 #define        MCFSIM_PADAT            (MCF_MBAR + 0x248)
 
+/*
+ *  UART module.
+ */
+#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
+#define MCFUART_BASE1          0x200           /* Base address of UART1 */
+#define MCFUART_BASE2          0x1c0           /* Base address of UART2 */
+#else
+#define MCFUART_BASE1          0x1c0           /* Base address of UART1 */
+#define MCFUART_BASE2          0x200           /* Base address of UART2 */
+#endif
+
 /*
  * Generic GPIO support
  */

diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
index b8126d3..45c119c 100644 (file)
--- a/arch/m68k/include/asm/m532xsim.h
+++ b/arch/m68k/include/asm/m532xsim.h
@@ -103,6 +103,13 @@
 #define        ACR_CM_OFF_IMP          (3<<5)
 #define        ACR_WPROTECT            (1<<2)
 
+/*
+ *  UART module.
+ */
+#define MCFUART_BASE1          0xFC060000      /* Base address of UART1 */
+#define MCFUART_BASE2          0xFC064000      /* Base address of UART2 */
+#define MCFUART_BASE3          0xFC068000      /* Base address of UART3 */
+
 /*********************************************************************
  *
  * Reset Controller Module

diff --git a/arch/m68k/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h
index e07d4d8..ddfff88 100644 (file)
--- a/arch/m68k/include/asm/m5407sim.h
+++ b/arch/m68k/include/asm/m5407sim.h
@@ -76,6 +76,9 @@
 #define MCFSIM_DACR1           0x110           /* DRAM 1 Addr and Ctrl (r/w) */
 #define MCFSIM_DMR1            0x114           /* DRAM 1 Mask reg (r/w) */
 
+#define MCFUART_BASE1          0x1c0           /* Base address of UART1 */
+#define MCFUART_BASE2          0x200           /* Base address of UART2 */
+
 #define        MCFSIM_PADDR            (MCF_MBAR + 0x244)
 #define        MCFSIM_PADAT            (MCF_MBAR + 0x248)
 

diff --git a/arch/m68k/include/asm/m54xxsim.h b/arch/m68k/include/asm/m54xxsim.h
index 6072248..a08a7ae 100644 (file)
--- a/arch/m68k/include/asm/m54xxsim.h
+++ b/arch/m68k/include/asm/m54xxsim.h
@@ -24,6 +24,14 @@
 #define MCFINTC_IACKL          0x19            /* */
 #define MCFINTC_ICR0           0x40            /* Base ICR register */
 
+/*
+ *     UART module.
+ */
+#define MCFUART_BASE1          0x8600          /* Base address of UART1 */
+#define MCFUART_BASE2          0x8700          /* Base address of UART2 */
+#define MCFUART_BASE3          0x8800          /* Base address of UART3 */
+#define MCFUART_BASE4          0x8900          /* Base address of UART4 */
+
 /*
  *     Define system peripheral IRQ usage.
  */

diff --git a/arch/m68k/include/asm/mcfuart.h b/arch/m68k/include/asm/mcfuart.h
index c67daca..2abedff 100644 (file)
--- a/arch/m68k/include/asm/mcfuart.h
+++ b/arch/m68k/include/asm/mcfuart.h
@@ -12,49 +12,6 @@
 #define        mcfuart_h
 /****************************************************************************/
 
-/*
- *     Define the base address of the UARTS within the MBAR address
- *     space.
- */
-#if defined(CONFIG_M5272)
-#define        MCFUART_BASE1           0x100           /* Base address of UART1 */
-#define        MCFUART_BASE2           0x140           /* Base address of UART2 */
-#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e)
-#if defined(CONFIG_NETtel)
-#define        MCFUART_BASE1           0x180           /* Base address of UART1 */
-#define        MCFUART_BASE2           0x140           /* Base address of UART2 */
-#else
-#define        MCFUART_BASE1           0x140           /* Base address of UART1 */
-#define        MCFUART_BASE2           0x180           /* Base address of UART2 */
-#endif
-#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-#define MCFUART_BASE1          0x200           /* Base address of UART1 */
-#define MCFUART_BASE2          0x240           /* Base address of UART2 */
-#define MCFUART_BASE3          0x280           /* Base address of UART3 */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
-#define MCFUART_BASE1          0x200           /* Base address of UART1 */
-#define MCFUART_BASE2          0x1c0           /* Base address of UART2 */
-#else
-#define MCFUART_BASE1          0x1c0           /* Base address of UART1 */
-#define MCFUART_BASE2          0x200           /* Base address of UART2 */
-#endif
-#elif defined(CONFIG_M520x)
-#define MCFUART_BASE1          0x60000         /* Base address of UART1 */
-#define MCFUART_BASE2          0x64000         /* Base address of UART2 */
-#define MCFUART_BASE3          0x68000         /* Base address of UART2 */
-#elif defined(CONFIG_M532x)
-#define MCFUART_BASE1          0xfc060000      /* Base address of UART1 */
-#define MCFUART_BASE2          0xfc064000      /* Base address of UART2 */
-#define MCFUART_BASE3          0xfc068000      /* Base address of UART3 */
-#elif defined(CONFIG_M54xx)
-#define MCFUART_BASE1          0x8600          /* on M54xx */
-#define MCFUART_BASE2          0x8700          /* on M54xx */
-#define MCFUART_BASE3          0x8800          /* on M54xx */
-#define MCFUART_BASE4          0x8900          /* on M54xx */
-#endif
-
-
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>