binman: alphabetize missing-blob entries

As the list of entries grows let's alphabetize the list to make
searching a little easier. No functional changes intended

Reviewed-by: Anshul Dalal <anshuld@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>

diff --git a/tools/binman/missing-blob-help b/tools/binman/missing-blob-help
index ab0023e..b73b16f 100644 (file)
--- a/tools/binman/missing-blob-help
+++ b/tools/binman/missing-blob-help
@@ -14,15 +14,6 @@ atf-bl31-sunxi:
 Please read the section on ARM Trusted Firmware (ATF) in
 board/sunxi/README.sunxi64
 
-scp-sunxi:
-SCP firmware is required for system suspend, but is otherwise optional.
-Please read the section on SCP firmware in board/sunxi/README.sunxi64
-
-iot2050-seboot:
-See the documentation for IOT2050 board. Your image is missing SEBoot
-which is mandatory for board startup. Prebuilt SEBoot located at
-meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild/seboot_pg*.bin.
-
 iot2050-otpcmd:
 See the documentation for IOT2050 board. Your image is missing OTP command data
 block which is used for provisioning the customer keys to the board.
@@ -31,22 +22,31 @@ meta-iot2050/tree/master/recipes-bsp/secure-boot-otp-provisioning/files/make-otp
 for how to generate this binary. If you are not using secure boot or do not
 intend to provision the keys, disable CONFIG_IOT2050_EMBED_OTPCMD.
 
+iot2050-seboot:
+See the documentation for IOT2050 board. Your image is missing SEBoot
+which is mandatory for board startup. Prebuilt SEBoot located at
+meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild/seboot_pg*.bin.
+
 k3-rti-wdt-firmware:
 If CONFIG_WDT_K3_RTI_LOAD_FW is enabled, a firmware image is needed for
 the R5F core(s) to trigger the system reset. One possible source is
 https://github.com/siemens/k3-rti-wdt.
 
+opensbi:
+See the documentation for your board. The OpenSBI git repo is at
+https://github.com/riscv/opensbi.git
+You may need to build fw_dynamic.bin first and re-build u-boot with
+OPENSBI=/path/to/fw_dynamic.bin
+
 rockchip-tpl:
 An external TPL is required to initialize DRAM. Get the external TPL
 binary and build with ROCKCHIP_TPL=/path/to/ddr.bin. One possible source
 for the external TPL binary is https://github.com/rockchip-linux/rkbin.
 
+scp-sunxi:
+SCP firmware is required for system suspend, but is otherwise optional.
+Please read the section on SCP firmware in board/sunxi/README.sunxi64
+
 tee-os:
 See the documentation for your board. You may need to build Open Portable
 Trusted Execution Environment (OP-TEE) and build with TEE=/path/to/tee.bin
-
-opensbi:
-See the documentation for your board. The OpenSBI git repo is at
-https://github.com/riscv/opensbi.git
-You may need to build fw_dynamic.bin first and re-build u-boot with
-OPENSBI=/path/to/fw_dynamic.bin