usb: phy: Add RCAR Gen2 USB phy
authorValentine Barshak <valentine.barshak@cogentembedded.com>
Thu, 10 Oct 2013 16:35:17 +0000 (20:35 +0400)
committerFelipe Balbi <balbi@ti.com>
Thu, 10 Oct 2013 16:59:48 +0000 (11:59 -0500)
This adds RCAR Gen2 USB phy support. The driver configures
USB channels 0/2 which are shared between PCI USB hosts and
USBHS/USBSS devices. It also controls internal USBHS phy.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
drivers/usb/phy/Kconfig
drivers/usb/phy/Makefile
drivers/usb/phy/phy-rcar-gen2-usb.c [new file with mode: 0644]
include/linux/platform_data/usb-rcar-gen2-phy.h [new file with mode: 0644]

index d5589f9..c0c8cd3 100644 (file)
@@ -214,6 +214,19 @@ config USB_RCAR_PHY
          To compile this driver as a module, choose M here: the
          module will be called phy-rcar-usb.
 
+config USB_RCAR_GEN2_PHY
+       tristate "Renesas R-Car Gen2 USB PHY support"
+       depends on ARCH_R8A7790 || ARCH_R8A7791 || COMPILE_TEST
+       select USB_PHY
+       help
+         Say Y here to add support for the Renesas R-Car Gen2 USB PHY driver.
+         It is typically used to control internal USB PHY for USBHS,
+         and to configure shared USB channels 0 and 2.
+         This driver supports R8A7790 and R8A7791.
+
+         To compile this driver as a module, choose M here: the
+         module will be called phy-rcar-gen2-usb.
+
 config USB_ULPI
        bool "Generic ULPI Transceiver Driver"
        depends on ARM
index 2135e85..8c5b147 100644 (file)
@@ -29,5 +29,6 @@ obj-$(CONFIG_USB_MSM_OTG)             += phy-msm-usb.o
 obj-$(CONFIG_USB_MV_OTG)               += phy-mv-usb.o
 obj-$(CONFIG_USB_MXS_PHY)              += phy-mxs-usb.o
 obj-$(CONFIG_USB_RCAR_PHY)             += phy-rcar-usb.o
+obj-$(CONFIG_USB_RCAR_GEN2_PHY)                += phy-rcar-gen2-usb.o
 obj-$(CONFIG_USB_ULPI)                 += phy-ulpi.o
 obj-$(CONFIG_USB_ULPI_VIEWPORT)                += phy-ulpi-viewport.o
diff --git a/drivers/usb/phy/phy-rcar-gen2-usb.c b/drivers/usb/phy/phy-rcar-gen2-usb.c
new file mode 100644 (file)
index 0000000..a99a695
--- /dev/null
@@ -0,0 +1,248 @@
+/*
+ * Renesas R-Car Gen2 USB phy driver
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Cogent Embedded, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_data/usb-rcar-gen2-phy.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/usb/otg.h>
+
+struct rcar_gen2_usb_phy_priv {
+       struct usb_phy phy;
+       void __iomem *base;
+       struct clk *clk;
+       spinlock_t lock;
+       int usecount;
+       u32 ugctrl2;
+};
+
+#define usb_phy_to_priv(p) container_of(p, struct rcar_gen2_usb_phy_priv, phy)
+
+/* Low Power Status register */
+#define USBHS_LPSTS_REG                        0x02
+#define USBHS_LPSTS_SUSPM              (1 << 14)
+
+/* USB General control register */
+#define USBHS_UGCTRL_REG               0x80
+#define USBHS_UGCTRL_CONNECT           (1 << 2)
+#define USBHS_UGCTRL_PLLRESET          (1 << 0)
+
+/* USB General control register 2 */
+#define USBHS_UGCTRL2_REG              0x84
+#define USBHS_UGCTRL2_USB0_PCI         (1 << 4)
+#define USBHS_UGCTRL2_USB0_HS          (3 << 4)
+#define USBHS_UGCTRL2_USB2_PCI         (0 << 31)
+#define USBHS_UGCTRL2_USB2_SS          (1 << 31)
+
+/* USB General status register */
+#define USBHS_UGSTS_REG                        0x88
+#define USBHS_UGSTS_LOCK               (3 << 8)
+
+/* Enable USBHS internal phy */
+static int __rcar_gen2_usbhs_phy_enable(void __iomem *base)
+{
+       u32 val;
+       int i;
+
+       /* USBHS PHY power on */
+       val = ioread32(base + USBHS_UGCTRL_REG);
+       val &= ~USBHS_UGCTRL_PLLRESET;
+       iowrite32(val, base + USBHS_UGCTRL_REG);
+
+       val = ioread16(base + USBHS_LPSTS_REG);
+       val |= USBHS_LPSTS_SUSPM;
+       iowrite16(val, base + USBHS_LPSTS_REG);
+
+       for (i = 0; i < 20; i++) {
+               val = ioread32(base + USBHS_UGSTS_REG);
+               if ((val & USBHS_UGSTS_LOCK) == USBHS_UGSTS_LOCK) {
+                       val = ioread32(base + USBHS_UGCTRL_REG);
+                       val |= USBHS_UGCTRL_CONNECT;
+                       iowrite32(val, base + USBHS_UGCTRL_REG);
+                       return 0;
+               }
+               udelay(1);
+       }
+
+       /* Timed out waiting for the PLL lock */
+       return -ETIMEDOUT;
+}
+
+/* Disable USBHS internal phy */
+static int __rcar_gen2_usbhs_phy_disable(void __iomem *base)
+{
+       u32 val;
+
+       /* USBHS PHY power off */
+       val = ioread32(base + USBHS_UGCTRL_REG);
+       val &= ~USBHS_UGCTRL_CONNECT;
+       iowrite32(val, base + USBHS_UGCTRL_REG);
+
+       val = ioread16(base + USBHS_LPSTS_REG);
+       val &= ~USBHS_LPSTS_SUSPM;
+       iowrite16(val, base + USBHS_LPSTS_REG);
+
+       val = ioread32(base + USBHS_UGCTRL_REG);
+       val |= USBHS_UGCTRL_PLLRESET;
+       iowrite32(val, base + USBHS_UGCTRL_REG);
+       return 0;
+}
+
+/* Setup USB channels */
+static void __rcar_gen2_usb_phy_init(struct rcar_gen2_usb_phy_priv *priv)
+{
+       u32 val;
+
+       clk_prepare_enable(priv->clk);
+
+       /* Set USB channels in the USBHS UGCTRL2 register */
+       val = ioread32(priv->base);
+       val &= ~(USBHS_UGCTRL2_USB0_HS | USBHS_UGCTRL2_USB2_SS);
+       val |= priv->ugctrl2;
+       iowrite32(val, priv->base);
+}
+
+/* Shutdown USB channels */
+static void __rcar_gen2_usb_phy_shutdown(struct rcar_gen2_usb_phy_priv *priv)
+{
+       __rcar_gen2_usbhs_phy_disable(priv->base);
+       clk_disable_unprepare(priv->clk);
+}
+
+static int rcar_gen2_usb_phy_set_suspend(struct usb_phy *phy, int suspend)
+{
+       struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy);
+       unsigned long flags;
+       int retval;
+
+       spin_lock_irqsave(&priv->lock, flags);
+       retval = suspend ? __rcar_gen2_usbhs_phy_disable(priv->base) :
+                          __rcar_gen2_usbhs_phy_enable(priv->base);
+       spin_unlock_irqrestore(&priv->lock, flags);
+       return retval;
+}
+
+static int rcar_gen2_usb_phy_init(struct usb_phy *phy)
+{
+       struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy);
+       unsigned long flags;
+
+       spin_lock_irqsave(&priv->lock, flags);
+       /*
+        * Enable the clock and setup USB channels
+        * if it's the first user
+        */
+       if (!priv->usecount++)
+               __rcar_gen2_usb_phy_init(priv);
+       spin_unlock_irqrestore(&priv->lock, flags);
+       return 0;
+}
+
+static void rcar_gen2_usb_phy_shutdown(struct usb_phy *phy)
+{
+       struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy);
+       unsigned long flags;
+
+       spin_lock_irqsave(&priv->lock, flags);
+       if (!priv->usecount) {
+               dev_warn(phy->dev, "Trying to disable phy with 0 usecount\n");
+               goto out;
+       }
+
+       /* Disable everything if it's the last user */
+       if (!--priv->usecount)
+               __rcar_gen2_usb_phy_shutdown(priv);
+out:
+       spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int rcar_gen2_usb_phy_probe(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       struct rcar_gen2_phy_platform_data *pdata;
+       struct rcar_gen2_usb_phy_priv *priv;
+       struct resource *res;
+       void __iomem *base;
+       struct clk *clk;
+       int retval;
+
+       pdata = dev_get_platdata(&pdev->dev);
+       if (!pdata) {
+               dev_err(dev, "No platform data\n");
+               return -EINVAL;
+       }
+
+       clk = devm_clk_get(&pdev->dev, "usbhs");
+       if (IS_ERR(clk)) {
+               dev_err(&pdev->dev, "Can't get the clock\n");
+               return PTR_ERR(clk);
+       }
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       base = devm_ioremap_resource(dev, res);
+       if (IS_ERR(base))
+               return PTR_ERR(base);
+
+       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+       if (!priv) {
+               dev_err(dev, "Memory allocation failed\n");
+               return -ENOMEM;
+       }
+
+       spin_lock_init(&priv->lock);
+       priv->clk = clk;
+       priv->base = base;
+       priv->ugctrl2 = pdata->chan0_pci ?
+                       USBHS_UGCTRL2_USB0_PCI : USBHS_UGCTRL2_USB0_HS;
+       priv->ugctrl2 |= pdata->chan2_pci ?
+                       USBHS_UGCTRL2_USB2_PCI : USBHS_UGCTRL2_USB2_SS;
+       priv->phy.dev = dev;
+       priv->phy.label = dev_name(dev);
+       priv->phy.init = rcar_gen2_usb_phy_init;
+       priv->phy.shutdown = rcar_gen2_usb_phy_shutdown;
+       priv->phy.set_suspend = rcar_gen2_usb_phy_set_suspend;
+
+       retval = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2);
+       if (retval < 0) {
+               dev_err(dev, "Failed to add USB phy\n");
+               return retval;
+       }
+
+       platform_set_drvdata(pdev, priv);
+
+       return retval;
+}
+
+static int rcar_gen2_usb_phy_remove(struct platform_device *pdev)
+{
+       struct rcar_gen2_usb_phy_priv *priv = platform_get_drvdata(pdev);
+
+       usb_remove_phy(&priv->phy);
+
+       return 0;
+}
+
+static struct platform_driver rcar_gen2_usb_phy_driver = {
+       .driver = {
+               .name = "usb_phy_rcar_gen2",
+       },
+       .probe = rcar_gen2_usb_phy_probe,
+       .remove = rcar_gen2_usb_phy_remove,
+};
+
+module_platform_driver(rcar_gen2_usb_phy_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas R-Car Gen2 USB phy");
+MODULE_AUTHOR("Valentine Barshak <valentine.barshak@cogentembedded.com>");
diff --git a/include/linux/platform_data/usb-rcar-gen2-phy.h b/include/linux/platform_data/usb-rcar-gen2-phy.h
new file mode 100644 (file)
index 0000000..dd3ba46
--- /dev/null
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Cogent Embedded, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __USB_RCAR_GEN2_PHY_H
+#define __USB_RCAR_GEN2_PHY_H
+
+#include <linux/types.h>
+
+struct rcar_gen2_phy_platform_data {
+       /* USB channel 0 configuration */
+       bool chan0_pci:1;       /* true: PCI USB host 0, false: USBHS */
+       /* USB channel 2 configuration */
+       bool chan2_pci:1;       /* true: PCI USB host 2, false: USBSS */
+};
+
+#endif