powerpc: Board support for GE Fanuc SBC610
authorMartyn Welch <martyn.welch@gefanuc.com>
Tue, 16 Sep 2008 09:57:47 +0000 (10:57 +0100)
committerKumar Gala <galak@kernel.crashing.org>
Tue, 16 Sep 2008 15:17:14 +0000 (10:17 -0500)
Support for the SBC610 VPX Single Board Computer from GE Fanuc (PowerPC
MPC8641D).

This is the basic board support for GE Fanuc's SBC610, a 6U single board
computer, based on Freescale's MPC8641D.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
arch/powerpc/boot/dts/gef_sbc610.dts [new file with mode: 0644]
arch/powerpc/platforms/86xx/Kconfig
arch/powerpc/platforms/86xx/Makefile
arch/powerpc/platforms/86xx/gef_sbc610.c [new file with mode: 0644]

diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
new file mode 100644 (file)
index 0000000..80b79e4
--- /dev/null
@@ -0,0 +1,260 @@
+/*
+ * GE Fanuc SBC610 Device Tree Source
+ *
+ * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Based on: SBS CM6 Device Tree Source
+ * Copyright 2007 SBS Technologies GmbH & Co. KG
+ * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ */
+
+/*
+ * Compiled with dtc -I dts -O dtb -o gef_sbc610.dtb gef_sbc610.dts
+ */
+
+/dts-v1/;
+
+/ {
+       model = "GEF_SBC610";
+       compatible = "gef,sbc610";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       aliases {
+               ethernet0 = &enet0;
+               ethernet1 = &enet1;
+               serial0 = &serial0;
+               serial1 = &serial1;
+               pci0 = &pci0;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               PowerPC,8641@0 {
+                       device_type = "cpu";
+                       reg = <0>;
+                       d-cache-line-size = <32>;       // 32 bytes
+                       i-cache-line-size = <32>;       // 32 bytes
+                       d-cache-size = <32768>;         // L1, 32K
+                       i-cache-size = <32768>;         // L1, 32K
+                       timebase-frequency = <0>;       // From uboot
+                       bus-frequency = <0>;            // From uboot
+                       clock-frequency = <0>;          // From uboot
+               };
+               PowerPC,8641@1 {
+                       device_type = "cpu";
+                       reg = <1>;
+                       d-cache-line-size = <32>;       // 32 bytes
+                       i-cache-line-size = <32>;       // 32 bytes
+                       d-cache-size = <32768>;         // L1, 32K
+                       i-cache-size = <32768>;         // L1, 32K
+                       timebase-frequency = <0>;       // From uboot
+                       bus-frequency = <0>;            // From uboot
+                       clock-frequency = <0>;          // From uboot
+               };
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0x0 0x40000000>; // set by uboot
+       };
+
+       soc@fef00000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               #interrupt-cells = <2>;
+               device_type = "soc";
+               compatible = "simple-bus";
+               ranges = <0x0 0xfef00000 0x00100000>;
+               reg = <0xfef00000 0x100000>;    // CCSRBAR 1M
+               bus-frequency = <0>;
+
+               i2c1: i2c@3000 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "fsl-i2c";
+                       reg = <0x3000 0x100>;
+                       interrupts = <0x2b 0x2>;
+                       interrupt-parent = <&mpic>;
+                       dfsrr;
+
+                       eti@6b {
+                               compatible = "dallas,ds1682";
+                               reg = <0x6b>;
+                       };
+               };
+
+               i2c2: i2c@3100 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "fsl-i2c";
+                       reg = <0x3100 0x100>;
+                       interrupts = <0x2b 0x2>;
+                       interrupt-parent = <&mpic>;
+                       dfsrr;
+               };
+
+               dma@21300 {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+                       reg = <0x21300 0x4>;
+                       ranges = <0x0 0x21100 0x200>;
+                       cell-index = <0>;
+                       dma-channel@0 {
+                               compatible = "fsl,mpc8641-dma-channel",
+                                          "fsl,eloplus-dma-channel";
+                               reg = <0x0 0x80>;
+                               cell-index = <0>;
+                               interrupt-parent = <&mpic>;
+                               interrupts = <20 2>;
+                       };
+                       dma-channel@80 {
+                               compatible = "fsl,mpc8641-dma-channel",
+                                          "fsl,eloplus-dma-channel";
+                               reg = <0x80 0x80>;
+                               cell-index = <1>;
+                               interrupt-parent = <&mpic>;
+                               interrupts = <21 2>;
+                       };
+                       dma-channel@100 {
+                               compatible = "fsl,mpc8641-dma-channel",
+                                          "fsl,eloplus-dma-channel";
+                               reg = <0x100 0x80>;
+                               cell-index = <2>;
+                               interrupt-parent = <&mpic>;
+                               interrupts = <22 2>;
+                       };
+                       dma-channel@180 {
+                               compatible = "fsl,mpc8641-dma-channel",
+                                          "fsl,eloplus-dma-channel";
+                               reg = <0x180 0x80>;
+                               cell-index = <3>;
+                               interrupt-parent = <&mpic>;
+                               interrupts = <23 2>;
+                       };
+               };
+
+               mdio@24520 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "fsl,gianfar-mdio";
+                       reg = <0x24520 0x20>;
+
+                       phy0: ethernet-phy@0 {
+                               interrupt-parent = <&mpic>;
+                               interrupts = <0x0 0x1>;
+                               reg = <1>;
+                       };
+                       phy2: ethernet-phy@2 {
+                               interrupt-parent = <&mpic>;
+                               interrupts = <0x0 0x1>;
+                               reg = <3>;
+                       };
+               };
+
+               enet0: ethernet@24000 {
+                       device_type = "network";
+                       model = "eTSEC";
+                       compatible = "gianfar";
+                       reg = <0x24000 0x1000>;
+                       local-mac-address = [ 00 00 00 00 00 00 ];
+                       interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+                       interrupt-parent = <&mpic>;
+                       phy-handle = <&phy0>;
+                       phy-connection-type = "gmii";
+               };
+
+               enet1: ethernet@26000 {
+                       device_type = "network";
+                       model = "eTSEC";
+                       compatible = "gianfar";
+                       reg = <0x26000 0x1000>;
+                       local-mac-address = [ 00 00 00 00 00 00 ];
+                       interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
+                       interrupt-parent = <&mpic>;
+                       phy-handle = <&phy2>;
+                       phy-connection-type = "gmii";
+               };
+
+               serial0: serial@4500 {
+                       cell-index = <0>;
+                       device_type = "serial";
+                       compatible = "ns16550";
+                       reg = <0x4500 0x100>;
+                       clock-frequency = <0>;
+                       interrupts = <0x2a 0x2>;
+                       interrupt-parent = <&mpic>;
+               };
+
+               serial1: serial@4600 {
+                       cell-index = <1>;
+                       device_type = "serial";
+                       compatible = "ns16550";
+                       reg = <0x4600 0x100>;
+                       clock-frequency = <0>;
+                       interrupts = <0x1c 0x2>;
+                       interrupt-parent = <&mpic>;
+               };
+
+               mpic: pic@40000 {
+                       clock-frequency = <0>;
+                       interrupt-controller;
+                       #address-cells = <0>;
+                       #interrupt-cells = <2>;
+                       reg = <0x40000 0x40000>;
+                       compatible = "chrp,open-pic";
+                       device_type = "open-pic";
+               };
+
+               global-utilities@e0000 {
+                       compatible = "fsl,mpc8641-guts";
+                       reg = <0xe0000 0x1000>;
+                       fsl,has-rstcr;
+               };
+       };
+
+       pci0: pcie@fef08000 {
+               compatible = "fsl,mpc8641-pcie";
+               device_type = "pci";
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               reg = <0xfef08000 0x1000>;
+               bus-range = <0x0 0xff>;
+               ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
+                         0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
+               clock-frequency = <33333333>;
+               interrupt-parent = <&mpic>;
+               interrupts = <0x18 0x2>;
+               interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+               interrupt-map = <
+                       0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
+                       0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
+                       0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
+                       0x0000 0x0 0x0 0x4 &mpic 0x3 0x1
+               >;
+
+               pcie@0 {
+                       reg = <0 0 0 0 0>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       device_type = "pci";
+                       ranges = <0x02000000 0x0 0x80000000
+                                 0x02000000 0x0 0x80000000
+                                 0x0 0x40000000
+
+                                 0x01000000 0x0 0x00000000
+                                 0x01000000 0x0 0x00000000
+                                 0x0 0x00400000>;
+               };
+       };
+};
index 9355a52..77dd797 100644 (file)
@@ -31,6 +31,13 @@ config MPC8610_HPCD
        help
          This option enables support for the MPC8610 HPCD board.
 
+config GEF_SBC610
+       bool "GE Fanuc SBC610"
+       select DEFAULT_UIMAGE
+       select HAS_RAPIDIO
+       help
+         This option enables support for GE Fanuc's SBC610.
+
 endif
 
 config MPC8641
@@ -39,7 +46,7 @@ config MPC8641
        select FSL_PCI if PCI
        select PPC_UDBG_16550
        select MPIC
-       default y if MPC8641_HPCN || SBC8641D
+       default y if MPC8641_HPCN || SBC8641D || GEF_SBC610
 
 config MPC8610
        bool
index 8fee37d..cb9fc8f 100644 (file)
@@ -7,3 +7,4 @@ obj-$(CONFIG_SMP)               += mpc86xx_smp.o
 obj-$(CONFIG_MPC8641_HPCN)     += mpc86xx_hpcn.o
 obj-$(CONFIG_SBC8641D)         += sbc8641d.o
 obj-$(CONFIG_MPC8610_HPCD)     += mpc8610_hpcd.o
+obj-$(CONFIG_GEF_SBC610)       += gef_sbc610.o
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c
new file mode 100644 (file)
index 0000000..3543a9e
--- /dev/null
@@ -0,0 +1,149 @@
+/*
+ * GE Fanuc SBC610 board support
+ *
+ * Author: Martyn Welch <martyn.welch@gefanuc.com>
+ *
+ * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc86xx.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_pci.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc86xx.h"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG (fmt...) do { printk(KERN_ERR "SBC610: " fmt); } while (0)
+#else
+#define DBG (fmt...) do { } while (0)
+#endif
+
+static void __init gef_sbc610_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+       struct device_node *np;
+
+       for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") {
+               fsl_add_bridge(np, 1);
+       }
+#endif
+
+       printk(KERN_INFO "GE Fanuc Intelligent Platforms SBC610 6U VPX SBC\n");
+
+#ifdef CONFIG_SMP
+       mpc86xx_smp_init();
+#endif
+}
+
+
+static void gef_sbc610_show_cpuinfo(struct seq_file *m)
+{
+       struct device_node *root;
+       uint memsize = total_memory;
+       const char *model = "";
+       uint svid = mfspr(SPRN_SVR);
+
+       seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
+
+       root = of_find_node_by_path("/");
+       if (root)
+               model = of_get_property(root, "model", NULL);
+       seq_printf(m, "Machine\t\t: %s\n", model);
+       of_node_put(root);
+
+       seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+       seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+}
+
+
+/*
+ * Called very early, device-tree isn't unflattened
+ *
+ * This function is called to determine whether the BSP is compatible with the
+ * supplied device-tree, which is assumed to be the correct one for the actual
+ * board. It is expected thati, in the future, a kernel may support multiple
+ * boards.
+ */
+static int __init gef_sbc610_probe(void)
+{
+       unsigned long root = of_get_flat_dt_root();
+
+       if (of_flat_dt_is_compatible(root, "gef,sbc610"))
+               return 1;
+
+       return 0;
+}
+
+static long __init mpc86xx_time_init(void)
+{
+       unsigned int temp;
+
+       /* Set the time base to zero */
+       mtspr(SPRN_TBWL, 0);
+       mtspr(SPRN_TBWU, 0);
+
+       temp = mfspr(SPRN_HID0);
+       temp |= HID0_TBEN;
+       mtspr(SPRN_HID0, temp);
+       asm volatile("isync");
+
+       return 0;
+}
+
+static __initdata struct of_device_id of_bus_ids[] = {
+       { .compatible = "simple-bus", },
+       {},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+       printk(KERN_DEBUG "Probe platform devices\n");
+       of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+       return 0;
+}
+machine_device_initcall(gef_sbc610, declare_of_platform_devices);
+
+define_machine(gef_sbc610) {
+       .name                   = "GE Fanuc SBC610",
+       .probe                  = gef_sbc610_probe,
+       .setup_arch             = gef_sbc610_setup_arch,
+       .init_IRQ               = mpc86xx_init_irq,
+       .show_cpuinfo           = gef_sbc610_show_cpuinfo,
+       .get_irq                = mpic_get_irq,
+       .restart                = fsl_rstcr_restart,
+       .time_init              = mpc86xx_time_init,
+       .calibrate_decr         = generic_calibrate_decr,
+       .progress               = udbg_progress,
+#ifdef CONFIG_PCI
+       .pcibios_fixup_bus      = fsl_pcibios_fixup_bus,
+#endif
+};