#include "ath9k.h"
+#define FUDGE 2
+
/*
* This function will modify certain transmit queue properties depending on
* the operating mode of the station (AP or AdHoc). Parameters are AIFS
}
/*
- * Configure the beacon and sleep timers.
- *
- * When operating as an AP this resets the TSF and sets
- * up the hardware to notify us when we need to issue beacons.
- *
- * When operating in station mode this sets up the beacon
- * timers according to the timestamp of the last received
- * beacon and the current TSF, configures PCF and DTIM
- * handling, programs the sleep registers so the hardware
- * will wakeup in time to receive beacons, and configures
- * the beacon miss handling so we'll receive a BMISS
- * interrupt when we stop seeing beacons from the AP
- * we've associated with.
+ * For multi-bss ap support beacons are either staggered evenly over N slots or
+ * burst together. For the former arrange for the SWBA to be delivered for each
+ * slot. Slots that are not occupied will generate nothing.
*/
-void ath_beacon_config(struct ath_softc *sc, int if_id)
+static void ath_beacon_config_ap(struct ath_softc *sc,
+ struct ath_beacon_config *conf,
+ struct ath_vif *avp)
{
- struct ieee80211_vif *vif;
- struct ath_hw *ah = sc->sc_ah;
- struct ath_beacon_config conf;
- struct ath_vif *avp;
- enum nl80211_iftype opmode;
u32 nexttbtt, intval;
- if (if_id != ATH_IF_ID_ANY) {
- vif = sc->vifs[if_id];
- avp = (void *)vif->drv_priv;
- opmode = avp->av_opmode;
- } else {
- opmode = sc->sc_ah->opmode;
- }
+ /* NB: the beacon interval is kept internally in TU's */
+ intval = conf->beacon_interval & ATH9K_BEACON_PERIOD;
+ intval /= ATH_BCBUF; /* for staggered beacons */
+ nexttbtt = intval;
+ intval |= ATH9K_BEACON_RESET_TSF;
- memset(&conf, 0, sizeof(struct ath_beacon_config));
+ /*
+ * In AP mode we enable the beacon timers and SWBA interrupts to
+ * prepare beacon frames.
+ */
+ intval |= ATH9K_BEACON_ENA;
+ sc->imask |= ATH9K_INT_SWBA;
+ ath_beaconq_config(sc);
- conf.beacon_interval = sc->hw->conf.beacon_int ?
- sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL;
- conf.listen_interval = 1;
- conf.dtim_period = conf.beacon_interval;
- conf.dtim_count = 1;
- conf.bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf.beacon_interval;
+ /* Set the computed AP beacon timers */
- /* extract tstamp from last beacon and convert to TU */
- nexttbtt = TSF_TO_TU(sc->beacon.bc_tstamp >> 32, sc->beacon.bc_tstamp);
+ ath9k_hw_set_interrupts(sc->sc_ah, 0);
+ ath9k_hw_beaconinit(sc->sc_ah, nexttbtt, intval);
+ sc->beacon.bmisscnt = 0;
+ ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
+}
- /* XXX conditionalize multi-bss support? */
- if (sc->sc_ah->opmode == NL80211_IFTYPE_AP) {
- /*
- * For multi-bss ap support beacons are either staggered
- * evenly over N slots or burst together. For the former
- * arrange for the SWBA to be delivered for each slot.
- * Slots that are not occupied will generate nothing.
- */
- /* NB: the beacon interval is kept internally in TU's */
- intval = conf.beacon_interval & ATH9K_BEACON_PERIOD;
- intval /= ATH_BCBUF; /* for staggered beacons */
+/*
+ * This sets up the beacon timers according to the timestamp of the last
+ * received beacon and the current TSF, configures PCF and DTIM
+ * handling, programs the sleep registers so the hardware will wakeup in
+ * time to receive beacons, and configures the beacon miss handling so
+ * we'll receive a BMISS interrupt when we stop seeing beacons from the AP
+ * we've associated with.
+ */
+static void ath_beacon_config_sta(struct ath_softc *sc,
+ struct ath_beacon_config *conf,
+ struct ath_vif *avp)
+{
+ struct ath9k_beacon_state bs;
+ int dtimperiod, dtimcount, sleepduration;
+ int cfpperiod, cfpcount;
+ u32 nexttbtt = 0, intval, tsftu;
+ u64 tsf;
+
+ memset(&bs, 0, sizeof(bs));
+ intval = conf->beacon_interval & ATH9K_BEACON_PERIOD;
+
+ /*
+ * Setup dtim and cfp parameters according to
+ * last beacon we received (which may be none).
+ */
+ dtimperiod = conf->dtim_period;
+ if (dtimperiod <= 0) /* NB: 0 if not known */
+ dtimperiod = 1;
+ dtimcount = conf->dtim_count;
+ if (dtimcount >= dtimperiod) /* NB: sanity check */
+ dtimcount = 0;
+ cfpperiod = 1; /* NB: no PCF support yet */
+ cfpcount = 0;
+
+ sleepduration = conf->listen_interval * intval;
+ if (sleepduration <= 0)
+ sleepduration = intval;
+
+ /*
+ * Pull nexttbtt forward to reflect the current
+ * TSF and calculate dtim+cfp state for the result.
+ */
+ tsf = ath9k_hw_gettsf64(sc->sc_ah);
+ tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE;
+ do {
+ nexttbtt += intval;
+ if (--dtimcount < 0) {
+ dtimcount = dtimperiod - 1;
+ if (--cfpcount < 0)
+ cfpcount = cfpperiod - 1;
+ }
+ } while (nexttbtt < tsftu);
+
+ bs.bs_intval = intval;
+ bs.bs_nexttbtt = nexttbtt;
+ bs.bs_dtimperiod = dtimperiod*intval;
+ bs.bs_nextdtim = bs.bs_nexttbtt + dtimcount*intval;
+ bs.bs_cfpperiod = cfpperiod*bs.bs_dtimperiod;
+ bs.bs_cfpnext = bs.bs_nextdtim + cfpcount*bs.bs_dtimperiod;
+ bs.bs_cfpmaxduration = 0;
+
+ /*
+ * Calculate the number of consecutive beacons to miss* before taking
+ * a BMISS interrupt. The configuration is specified in TU so we only
+ * need calculate based on the beacon interval. Note that we clamp the
+ * result to at most 15 beacons.
+ */
+ if (sleepduration > intval) {
+ bs.bs_bmissthreshold = conf->listen_interval *
+ ATH_DEFAULT_BMISS_LIMIT / 2;
} else {
- intval = conf.beacon_interval & ATH9K_BEACON_PERIOD;
+ bs.bs_bmissthreshold = DIV_ROUND_UP(conf->bmiss_timeout, intval);
+ if (bs.bs_bmissthreshold > 15)
+ bs.bs_bmissthreshold = 15;
+ else if (bs.bs_bmissthreshold <= 0)
+ bs.bs_bmissthreshold = 1;
}
- if (nexttbtt == 0) /* e.g. for ap mode */
- nexttbtt = intval;
- else if (intval) /* NB: can be 0 for monitor mode */
- nexttbtt = roundup(nexttbtt, intval);
+ /*
+ * Calculate sleep duration. The configuration is given in ms.
+ * We ensure a multiple of the beacon period is used. Also, if the sleep
+ * duration is greater than the DTIM period then it makes senses
+ * to make it a multiple of that.
+ *
+ * XXX fixed at 100ms
+ */
- DPRINTF(sc, ATH_DBG_BEACON, "nexttbtt %u intval %u (%u)\n",
- nexttbtt, intval, conf.beacon_interval);
+ bs.bs_sleepduration = roundup(IEEE80211_MS_TO_TU(100), sleepduration);
+ if (bs.bs_sleepduration > bs.bs_dtimperiod)
+ bs.bs_sleepduration = bs.bs_dtimperiod;
- /* Check for NL80211_IFTYPE_AP and sc_nostabeacons for WDS client */
- if (sc->sc_ah->opmode == NL80211_IFTYPE_STATION) {
- struct ath9k_beacon_state bs;
- u64 tsf;
- u32 tsftu;
- int dtimperiod, dtimcount, sleepduration;
- int cfpperiod, cfpcount;
+ /* TSF out of range threshold fixed at 1 second */
+ bs.bs_tsfoor_threshold = ATH9K_TSFOOR_THRESHOLD;
- /*
- * Setup dtim and cfp parameters according to
- * last beacon we received (which may be none).
- */
- dtimperiod = conf.dtim_period;
- if (dtimperiod <= 0) /* NB: 0 if not known */
- dtimperiod = 1;
- dtimcount = conf.dtim_count;
- if (dtimcount >= dtimperiod) /* NB: sanity check */
- dtimcount = 0;
- cfpperiod = 1; /* NB: no PCF support yet */
- cfpcount = 0;
-
- sleepduration = conf.listen_interval * intval;
- if (sleepduration <= 0)
- sleepduration = intval;
+ DPRINTF(sc, ATH_DBG_BEACON, "tsf: %llu tsftu: %u\n", tsf, tsftu);
+ DPRINTF(sc, ATH_DBG_BEACON,
+ "bmiss: %u sleep: %u cfp-period: %u maxdur: %u next: %u\n",
+ bs.bs_bmissthreshold, bs.bs_sleepduration,
+ bs.bs_cfpperiod, bs.bs_cfpmaxduration, bs.bs_cfpnext);
-#define FUDGE 2
- /*
- * Pull nexttbtt forward to reflect the current
- * TSF and calculate dtim+cfp state for the result.
- */
- tsf = ath9k_hw_gettsf64(ah);
- tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE;
- do {
- nexttbtt += intval;
- if (--dtimcount < 0) {
- dtimcount = dtimperiod - 1;
- if (--cfpcount < 0)
- cfpcount = cfpperiod - 1;
- }
- } while (nexttbtt < tsftu);
-#undef FUDGE
- memset(&bs, 0, sizeof(bs));
- bs.bs_intval = intval;
- bs.bs_nexttbtt = nexttbtt;
- bs.bs_dtimperiod = dtimperiod*intval;
- bs.bs_nextdtim = bs.bs_nexttbtt + dtimcount*intval;
- bs.bs_cfpperiod = cfpperiod*bs.bs_dtimperiod;
- bs.bs_cfpnext = bs.bs_nextdtim + cfpcount*bs.bs_dtimperiod;
- bs.bs_cfpmaxduration = 0;
+ /* Set the computed STA beacon timers */
- /*
- * Calculate the number of consecutive beacons to miss
- * before taking a BMISS interrupt. The configuration
- * is specified in TU so we only need calculate based
- * on the beacon interval. Note that we clamp the
- * result to at most 15 beacons.
- */
- if (sleepduration > intval) {
- bs.bs_bmissthreshold = conf.listen_interval *
- ATH_DEFAULT_BMISS_LIMIT / 2;
- } else {
- bs.bs_bmissthreshold =
- DIV_ROUND_UP(conf.bmiss_timeout, intval);
- if (bs.bs_bmissthreshold > 15)
- bs.bs_bmissthreshold = 15;
- else if (bs.bs_bmissthreshold <= 0)
- bs.bs_bmissthreshold = 1;
- }
+ ath9k_hw_set_interrupts(sc->sc_ah, 0);
+ ath9k_hw_set_sta_beacon_timers(sc->sc_ah, &bs);
+ sc->imask |= ATH9K_INT_BMISS;
+ ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
+}
- /*
- * Calculate sleep duration. The configuration is
- * given in ms. We insure a multiple of the beacon
- * period is used. Also, if the sleep duration is
- * greater than the DTIM period then it makes senses
- * to make it a multiple of that.
- *
- * XXX fixed at 100ms
- */
+static void ath_beacon_config_adhoc(struct ath_softc *sc,
+ struct ath_beacon_config *conf,
+ struct ath_vif *avp)
+{
+ u64 tsf;
+ u32 tsftu, intval, nexttbtt;
- bs.bs_sleepduration = roundup(IEEE80211_MS_TO_TU(100),
- sleepduration);
- if (bs.bs_sleepduration > bs.bs_dtimperiod)
- bs.bs_sleepduration = bs.bs_dtimperiod;
+ intval = conf->beacon_interval & ATH9K_BEACON_PERIOD;
- /* TSF out of range threshold fixed at 1 second */
- bs.bs_tsfoor_threshold = ATH9K_TSFOOR_THRESHOLD;
+ /* Pull nexttbtt forward to reflect the current TSF */
- DPRINTF(sc, ATH_DBG_BEACON,
- "tsf: %llu tsftu: %u\n", tsf, tsftu);
- DPRINTF(sc, ATH_DBG_BEACON,
- "bmiss: %u sleep: %u cfp-period: %u maxdur: %u next: %u\n",
- bs.bs_bmissthreshold, bs.bs_sleepduration,
- bs.bs_cfpperiod, bs.bs_cfpmaxduration, bs.bs_cfpnext);
-
- ath9k_hw_set_interrupts(ah, 0);
- ath9k_hw_set_sta_beacon_timers(ah, &bs);
- sc->imask |= ATH9K_INT_BMISS;
- ath9k_hw_set_interrupts(ah, sc->imask);
- } else {
- u64 tsf;
- u32 tsftu;
+ nexttbtt = TSF_TO_TU(sc->beacon.bc_tstamp >> 32, sc->beacon.bc_tstamp);
+ if (nexttbtt == 0)
+ nexttbtt = intval;
+ else if (intval)
+ nexttbtt = roundup(nexttbtt, intval);
- ath9k_hw_set_interrupts(ah, 0);
- if (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) {
- /* Pull nexttbtt forward to reflect the current TSF */
-#define FUDGE 2
- if (!(intval & ATH9K_BEACON_RESET_TSF)) {
- tsf = ath9k_hw_gettsf64(ah);
- tsftu = TSF_TO_TU((u32)(tsf>>32),
- (u32)tsf) + FUDGE;
- do {
- nexttbtt += intval;
- } while (nexttbtt < tsftu);
- }
-#undef FUDGE
- DPRINTF(sc, ATH_DBG_BEACON,
- "IBSS nexttbtt %u intval %u (%u)\n",
- nexttbtt, intval & ~ATH9K_BEACON_RESET_TSF,
- conf.beacon_interval);
+ tsf = ath9k_hw_gettsf64(sc->sc_ah);
+ tsftu = TSF_TO_TU((u32)(tsf>>32), (u32)tsf) + FUDGE;
+ do {
+ nexttbtt += intval;
+ } while (nexttbtt < tsftu);
- /*
- * In IBSS mode enable the beacon timers but only
- * enable SWBA interrupts if we need to manually
- * prepare beacon frames. Otherwise we use a
- * self-linked tx descriptor and let the hardware
- * deal with things.
- */
- intval |= ATH9K_BEACON_ENA;
- if (!(ah->caps.hw_caps & ATH9K_HW_CAP_VEOL))
- sc->imask |= ATH9K_INT_SWBA;
- ath_beaconq_config(sc);
- } else if (sc->sc_ah->opmode == NL80211_IFTYPE_AP) {
- if (nexttbtt == intval)
- intval |= ATH9K_BEACON_RESET_TSF;
- /*
- * In AP mode we enable the beacon timers and
- * SWBA interrupts to prepare beacon frames.
- */
- intval |= ATH9K_BEACON_ENA;
- sc->imask |= ATH9K_INT_SWBA;
- ath_beaconq_config(sc);
- }
+ DPRINTF(sc, ATH_DBG_BEACON,
+ "IBSS nexttbtt %u intval %u (%u)\n",
+ nexttbtt, intval, conf->beacon_interval);
- ath9k_hw_beaconinit(ah, nexttbtt, intval);
- sc->beacon.bmisscnt = 0;
- ath9k_hw_set_interrupts(ah, sc->imask);
+ /*
+ * In IBSS mode enable the beacon timers but only enable SWBA interrupts
+ * if we need to manually prepare beacon frames. Otherwise we use a
+ * self-linked tx descriptor and let the hardware deal with things.
+ */
+ intval |= ATH9K_BEACON_ENA;
+ if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_VEOL))
+ sc->imask |= ATH9K_INT_SWBA;
- /*
- * When using a self-linked beacon descriptor in
- * ibss mode load it once here.
- */
- if (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC &&
- (ah->caps.hw_caps & ATH9K_HW_CAP_VEOL))
- ath_beacon_start_adhoc(sc, 0);
- }
+ ath_beaconq_config(sc);
+
+ /* Set the computed ADHOC beacon timers */
+
+ ath9k_hw_set_interrupts(sc->sc_ah, 0);
+ ath9k_hw_beaconinit(sc->sc_ah, nexttbtt, intval);
+ sc->beacon.bmisscnt = 0;
+ ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
+
+ if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_VEOL)
+ ath_beacon_start_adhoc(sc, 0);
}
-void ath_beacon_sync(struct ath_softc *sc, int if_id)
+void ath_beacon_config(struct ath_softc *sc, int if_id)
{
- /*
- * Resync beacon timers using the tsf of the
- * beacon frame we just received.
- */
- ath_beacon_config(sc, if_id);
- sc->sc_flags |= SC_OP_BEACONS;
+ struct ath_beacon_config conf;
+ struct ath_vif *avp;
+ struct ieee80211_vif *vif;
+
+ /* Setup the beacon configuration parameters */
+
+ memset(&conf, 0, sizeof(struct ath_beacon_config));
+ conf.beacon_interval = sc->hw->conf.beacon_int ?
+ sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL;
+ conf.listen_interval = 1;
+ conf.dtim_period = conf.beacon_interval;
+ conf.dtim_count = 1;
+ conf.bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf.beacon_interval;
+
+ if (if_id != ATH_IF_ID_ANY) {
+ vif = sc->vifs[if_id];
+ avp = (struct ath_vif *)vif->drv_priv;
+
+ switch(avp->av_opmode) {
+ case NL80211_IFTYPE_AP:
+ ath_beacon_config_ap(sc, &conf, avp);
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ ath_beacon_config_adhoc(sc, &conf, avp);
+ break;
+ case NL80211_IFTYPE_STATION:
+ ath_beacon_config_sta(sc, &conf, avp);
+ break;
+ default:
+ DPRINTF(sc, ATH_DBG_CONFIG,
+ "Unsupported beaconing mode\n");
+ return;
+ }
+
+ sc->sc_flags |= SC_OP_BEACONS;
+ }
}
git.openpandora.org / pandora-kernel.git / commitdiff