Merge branch 'v3.8-samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel...

From Kukjin Kim:

That branch fixes build error for S3C24XX/S3C64xx. And corrects dw-mshc
properties on EXYNOS5 DT and fixes IRQ mapping on Cragganmore board.

* 'v3.8-samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S3C64XX: Fix up IRQ mapping for balblair on Cragganmore
  ARM: dts: correct the dw-mshc timing properties as per binding
  ARM: S3C64XX: Fix build error with CONFIG_S3C_DEV_FB disabled
  + Linux 3.8-rc3

Signed-off-by: Olof Johansson <olof@lixom.net>

diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 0004402..9b82fac 100644 (file)
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -26,7 +26,7 @@
 
        memory {
                device_type = "memory";
-               reg = <0x00000000 0x20000000>; /* 512 MB */
+               reg = <0x00000000 0x40000000>; /* 1 GB */
        };
 
        soc {

diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 271855a..e041f42 100644 (file)
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -50,27 +50,25 @@
                };
 
                gpio0: gpio@d0018100 {
-                       compatible = "marvell,armadaxp-gpio";
-                       reg = <0xd0018100 0x40>,
-                           <0xd0018800 0x30>;
+                       compatible = "marvell,orion-gpio";
+                       reg = <0xd0018100 0x40>;
                        ngpios = <32>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupts-cells = <2>;
-                       interrupts = <16>, <17>, <18>, <19>;
+                       interrupts = <82>, <83>, <84>, <85>;
                };
 
                gpio1: gpio@d0018140 {
-                       compatible = "marvell,armadaxp-gpio";
-                       reg = <0xd0018140 0x40>,
-                           <0xd0018840 0x30>;
+                       compatible = "marvell,orion-gpio";
+                       reg = <0xd0018140 0x40>;
                        ngpios = <17>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupts-cells = <2>;
-                       interrupts = <20>, <21>, <22>;
+                       interrupts = <87>, <88>, <89>;
                };
        };
 };

diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 1c1937d..9e23bd8 100644 (file)
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -51,39 +51,36 @@
                };
 
                gpio0: gpio@d0018100 {
-                       compatible = "marvell,armadaxp-gpio";
-                       reg = <0xd0018100 0x40>,
-                           <0xd0018800 0x30>;
+                       compatible = "marvell,orion-gpio";
+                       reg = <0xd0018100 0x40>;
                        ngpios = <32>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupts-cells = <2>;
-                       interrupts = <16>, <17>, <18>, <19>;
+                       interrupts = <82>, <83>, <84>, <85>;
                };
 
                gpio1: gpio@d0018140 {
-                       compatible = "marvell,armadaxp-gpio";
-                       reg = <0xd0018140 0x40>,
-                           <0xd0018840 0x30>;
+                       compatible = "marvell,orion-gpio";
+                       reg = <0xd0018140 0x40>;
                        ngpios = <32>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupts-cells = <2>;
-                       interrupts = <20>, <21>, <22>, <23>;
+                       interrupts = <87>, <88>, <89>, <90>;
                };
 
                gpio2: gpio@d0018180 {
-                       compatible = "marvell,armadaxp-gpio";
-                       reg = <0xd0018180 0x40>,
-                           <0xd0018870 0x30>;
+                       compatible = "marvell,orion-gpio";
+                       reg = <0xd0018180 0x40>;
                        ngpios = <3>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupts-cells = <2>;
-                       interrupts = <24>;
+                       interrupts = <91>;
                };
 
                ethernet@d0034000 {

diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index 4905cf3..9659661 100644 (file)
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -66,39 +66,36 @@
                };
 
                gpio0: gpio@d0018100 {
-                       compatible = "marvell,armadaxp-gpio";
-                       reg = <0xd0018100 0x40>,
-                           <0xd0018800 0x30>;
+                       compatible = "marvell,orion-gpio";
+                       reg = <0xd0018100 0x40>;
                        ngpios = <32>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupts-cells = <2>;
-                       interrupts = <16>, <17>, <18>, <19>;
+                       interrupts = <82>, <83>, <84>, <85>;
                };
 
                gpio1: gpio@d0018140 {
-                       compatible = "marvell,armadaxp-gpio";
-                       reg = <0xd0018140 0x40>,
-                           <0xd0018840 0x30>;
+                       compatible = "marvell,orion-gpio";
+                       reg = <0xd0018140 0x40>;
                        ngpios = <32>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupts-cells = <2>;
-                       interrupts = <20>, <21>, <22>, <23>;
+                       interrupts = <87>, <88>, <89>, <90>;
                };
 
                gpio2: gpio@d0018180 {
-                       compatible = "marvell,armadaxp-gpio";
-                       reg = <0xd0018180 0x40>,
-                           <0xd0018870 0x30>;
+                       compatible = "marvell,orion-gpio";
+                       reg = <0xd0018180 0x40>;
                        ngpios = <3>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupts-cells = <2>;
-                       interrupts = <24>;
+                       interrupts = <91>;
                };
 
                ethernet@d0034000 {

diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index fed7d3f..cdee96f 100644 (file)
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -26,10 +26,15 @@
 };
 
 &uart0 { status = "okay"; };
-&sdio0 { status = "okay"; };
 &sata0 { status = "okay"; };
 &i2c0 { status = "okay"; };
 
+&sdio0 {
+       status = "okay";
+       /* sdio0 card detect is connected to wrong pin on CuBox */
+       cd-gpios = <&gpio0 12 1>;
+};
+
 &spi0 {
        status = "okay";
 
@@ -42,9 +47,14 @@
 };
 
 &pinctrl {
-       pinctrl-0 = <&pmx_gpio_18>;
+       pinctrl-0 = <&pmx_gpio_12 &pmx_gpio_18>;
        pinctrl-names = "default";
 
+       pmx_gpio_12: pmx-gpio-12 {
+               marvell,pins = "mpp12";
+               marvell,function = "gpio";
+       };
+
        pmx_gpio_18: pmx-gpio-18 {
                marvell,pins = "mpp18";
                marvell,function = "gpio";

diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
index 9bc6785..77d21ab 100644 (file)
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -1,4 +1,5 @@
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
        chosen {
@@ -6,6 +7,21 @@
        };
 
        ocp@f1000000 {
+               pinctrl: pinctrl@10000 {
+                       pinctrl-0 = < &pmx_spi &pmx_twsi0 &pmx_uart0
+                                       &pmx_ns2_sata0 &pmx_ns2_sata1>;
+                       pinctrl-names = "default";
+
+                       pmx_ns2_sata0: pmx-ns2-sata0 {
+                               marvell,pins = "mpp21";
+                               marvell,function = "sata0";
+                       };
+                       pmx_ns2_sata1: pmx-ns2-sata1 {
+                               marvell,pins = "mpp20";
+                               marvell,function = "sata1";
+                       };
+               };
+
                serial@12000 {
                        clock-frequency = <166666667>;
                        status = "okay";

diff --git a/arch/arm/boot/dts/sunxi.dtsi b/arch/arm/boot/dts/sunxi.dtsi
index 8bbc2bf..8b36abe 100644 (file)
--- a/arch/arm/boot/dts/sunxi.dtsi
+++ b/arch/arm/boot/dts/sunxi.dtsi
@@ -60,19 +60,21 @@
                };
 
                uart0: uart@01c28000 {
-                       compatible = "ns8250";
+                       compatible = "snps,dw-apb-uart";
                        reg = <0x01c28000 0x400>;
                        interrupts = <1>;
                        reg-shift = <2>;
+                       reg-io-width = <4>;
                        clock-frequency = <24000000>;
                        status = "disabled";
                };
 
                uart1: uart@01c28400 {
-                       compatible = "ns8250";
+                       compatible = "snps,dw-apb-uart";
                        reg = <0x01c28400 0x400>;
                        interrupts = <2>;
                        reg-shift = <2>;
+                       reg-io-width = <4>;
                        clock-frequency = <24000000>;
                        status = "disabled";
                };

diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index 6809200..14f7c3b 100644 (file)
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -100,12 +100,14 @@ ENTRY(printch)
                b       1b
 ENDPROC(printch)
 
+#ifdef CONFIG_MMU
 ENTRY(debug_ll_addr)
                addruart r2, r3, ip
                str     r2, [r0]
                str     r3, [r1]
                mov     pc, lr
 ENDPROC(debug_ll_addr)
+#endif
 
 #else
 

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 3e628fd..0a2349d 100644 (file)
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -851,6 +851,7 @@ config SOC_IMX6Q
        select HAVE_CAN_FLEXCAN if CAN
        select HAVE_IMX_GPC
        select HAVE_IMX_MMDC
+       select HAVE_IMX_SRC
        select HAVE_SMP
        select MFD_SYSCON
        select PINCTRL

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 7f2c10c..c0c4e72 100644 (file)
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -436,6 +436,9 @@ int __init mx6q_clocks_init(void)
        for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
                clk_prepare_enable(clk[clks_init_on[i]]);
 
+       /* Set initial power mode */
+       imx6q_set_lpm(WAIT_CLOCKED);
+
        np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
        base = of_iomap(np, 0);
        WARN_ON(!base);

diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 7191ab4..fa36fb8 100644 (file)
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -142,6 +142,7 @@ extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
 extern void imx6q_clock_map_io(void);
 
 extern void imx_cpu_die(unsigned int cpu);
+extern int imx_cpu_kill(unsigned int cpu);
 
 #ifdef CONFIG_PM
 extern void imx6q_pm_init(void);

diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c
index 10b0ed3..25a47c6 100644 (file)
--- a/arch/arm/mach-imx/devices/platform-imx-fb.c
+++ b/arch/arm/mach-imx/devices/platform-imx-fb.c
@@ -54,7 +54,7 @@ struct platform_device *__init imx_add_imx_fb(
                        .flags = IORESOURCE_IRQ,
                },
        };
-       return imx_add_platform_device_dmamask("imx-fb", 0,
+       return imx_add_platform_device_dmamask(data->devid, 0,
                        res, ARRAY_SIZE(res),
                        pdata, sizeof(*pdata), DMA_BIT_MASK(32));
 }

diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 3dec962..7bc5fe1 100644 (file)
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -46,9 +46,11 @@ static inline void cpu_enter_lowpower(void)
 void imx_cpu_die(unsigned int cpu)
 {
        cpu_enter_lowpower();
-       imx_enable_cpu(cpu, false);
+       cpu_do_idle();
+}
 
-       /* spin here until hardware takes it down */
-       while (1)
-               ;
+int imx_cpu_kill(unsigned int cpu)
+{
+       imx_enable_cpu(cpu, false);
+       return 1;
 }

diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 3777b80..66fae88 100644 (file)
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -92,5 +92,6 @@ struct smp_operations  imx_smp_ops __initdata = {
        .smp_boot_secondary     = imx_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
        .cpu_die                = imx_cpu_die,
+       .cpu_kill               = imx_cpu_kill,
 #endif
 };

diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
index a17543d..ee42d20 100644 (file)
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -41,6 +41,7 @@ static int imx6q_pm_enter(suspend_state_t state)
                cpu_suspend(0, imx6q_suspend_finish);
                imx_smp_prepare();
                imx_gpc_post_resume();
+               imx6q_set_lpm(WAIT_CLOCKED);
                break;
        default:
                return -EINVAL;

diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index be50e79..e7fcea7 100644 (file)
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -475,13 +475,12 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
 {
        int ret = 0;
 
+       if (!ap_syscon_base)
+               return -EINVAL;
+
        if (nr == 0) {
                sys->mem_offset = PHYS_PCI_MEM_BASE;
                ret = pci_v3_setup_resources(sys);
-               /* Remap the Integrator system controller */
-               ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
-               if (!ap_syscon_base)
-                       return -EINVAL;
        }
 
        return ret;
@@ -497,6 +496,13 @@ void __init pci_v3_preinit(void)
        unsigned int temp;
        int ret;
 
+       /* Remap the Integrator system controller */
+       ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
+       if (!ap_syscon_base) {
+               pr_err("unable to remap the AP syscon for PCIv3\n");
+               return;
+       }
+
        pcibios_min_mem = 0x00100000;
 
        /*

diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c
index 8821720..f4632a8 100644 (file)
--- a/arch/arm/mach-kirkwood/board-ns2.c
+++ b/arch/arm/mach-kirkwood/board-ns2.c
@@ -18,47 +18,11 @@
 #include <linux/gpio.h>
 #include <linux/of.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct mv643xx_eth_platform_data ns2_ge00_data = {
        .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
 };
 
-static unsigned int ns2_mpp_config[] __initdata = {
-       MPP0_SPI_SCn,
-       MPP1_SPI_MOSI,
-       MPP2_SPI_SCK,
-       MPP3_SPI_MISO,
-       MPP4_NF_IO6,
-       MPP5_NF_IO7,
-       MPP6_SYSRST_OUTn,
-       MPP7_GPO,               /* Fan speed (bit 1) */
-       MPP8_TW0_SDA,
-       MPP9_TW0_SCK,
-       MPP10_UART0_TXD,
-       MPP11_UART0_RXD,
-       MPP12_GPO,              /* Red led */
-       MPP14_GPIO,             /* USB fuse */
-       MPP16_GPIO,             /* SATA 0 power */
-       MPP17_GPIO,             /* SATA 1 power */
-       MPP18_NF_IO0,
-       MPP19_NF_IO1,
-       MPP20_SATA1_ACTn,
-       MPP21_SATA0_ACTn,
-       MPP22_GPIO,             /* Fan speed (bit 0) */
-       MPP23_GPIO,             /* Fan power */
-       MPP24_GPIO,             /* USB mode select */
-       MPP25_GPIO,             /* Fan rotation fail */
-       MPP26_GPIO,             /* USB device vbus */
-       MPP28_GPIO,             /* USB enable host vbus */
-       MPP29_GPIO,             /* Blue led (slow register) */
-       MPP30_GPIO,             /* Blue led (command register) */
-       MPP31_GPIO,             /* Board power off */
-       MPP32_GPIO,             /* Power button (0 = Released, 1 = Pushed) */
-       MPP33_GPO,              /* Fan speed (bit 2) */
-       0
-};
-
 #define NS2_GPIO_POWER_OFF     31
 
 static void ns2_power_off(void)
@@ -71,8 +35,6 @@ void __init ns2_init(void)
        /*
         * Basic setup. Needs to be called early.
         */
-       kirkwood_mpp_conf(ns2_mpp_config);
-
        if (of_machine_is_compatible("lacie,netspace_lite_v2") ||
            of_machine_is_compatible("lacie,netspace_mini_v2"))
                ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);

diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 5dcb369..99df4df 100644 (file)
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -1,6 +1,8 @@
 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
        -I$(srctree)/arch/arm/plat-orion/include
 
+AFLAGS_coherency_ll.o          := -Wa,-march=armv7-a
+
 obj-y += system-controller.o
 obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o coherency.o coherency_ll.o pmsu.o
 obj-$(CONFIG_SMP)                += platsmp.o headsmp.o

diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 1252678..600f6f9 100644 (file)
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -729,6 +729,8 @@ static int __init imxfb_init_fbinfo(struct platform_device *pdev)
 
        memset(fbi, 0, sizeof(struct imxfb_info));
 
+       fbi->devtype = pdev->id_entry->driver_data;
+
        strlcpy(info->fix.id, IMX_NAME, sizeof(info->fix.id));
 
        info->fix.type                  = FB_TYPE_PACKED_PIXELS;
@@ -789,7 +791,6 @@ static int __init imxfb_probe(struct platform_device *pdev)
                return -ENOMEM;
 
        fbi = info->par;
-       fbi->devtype = pdev->id_entry->driver_data;
 
        if (!fb_mode)
                fb_mode = pdata->mode[0].mode.name;