Blackfin arch: use new platform data interface of musb to replace old one

Signed-off-by: Bryan Wu <cooloney@kernel.org>

diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index d22bc77..986483f 100644 (file)
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -43,9 +43,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/usb/sl811.h>
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 #include <linux/usb/musb.h>
-#endif
 #include <asm/cplb.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
@@ -130,6 +128,16 @@ static struct resource musb_resources[] = {
        },
 };
 
+static struct musb_hdrc_config musb_config = {
+       .multipoint     = 0,
+       .dyn_fifo       = 0,
+       .soft_con       = 1,
+       .dma            = 1,
+       .num_eps        = 7,
+       .dma_channels   = 7,
+       .gpio_vrsel     = GPIO_PF11,
+};
+
 static struct musb_hdrc_platform_data musb_plat = {
 #if defined(CONFIG_USB_MUSB_OTG)
        .mode           = MUSB_OTG,
@@ -138,7 +146,7 @@ static struct musb_hdrc_platform_data musb_plat = {
 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
        .mode           = MUSB_PERIPHERAL,
 #endif
-       .multipoint     = 0,
+       .config         = &musb_config,
 };
 
 static u64 musb_dmamask = ~(u32)0;

diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 762f754..a756934 100644 (file)
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -42,9 +42,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/usb/sl811.h>
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 #include <linux/usb/musb.h>
-#endif
 #include <asm/cplb.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
@@ -129,6 +127,16 @@ static struct resource musb_resources[] = {
        },
 };
 
+static struct musb_hdrc_config musb_config = {
+       .multipoint     = 0,
+       .dyn_fifo       = 0,
+       .soft_con       = 1,
+       .dma            = 1,
+       .num_eps        = 7,
+       .dma_channels   = 7,
+       .gpio_vrsel     = GPIO_PG13,
+};
+
 static struct musb_hdrc_platform_data musb_plat = {
 #if defined(CONFIG_USB_MUSB_OTG)
        .mode           = MUSB_OTG,
@@ -137,7 +145,7 @@ static struct musb_hdrc_platform_data musb_plat = {
 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
        .mode           = MUSB_PERIPHERAL,
 #endif
-       .multipoint     = 0,
+       .config         = &musb_config,
 };
 
 static u64 musb_dmamask = ~(u32)0;

diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index ce934ee..36f56f9 100644 (file)
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -36,9 +36,7 @@
 #include <linux/spi/flash.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 #include <linux/usb/musb.h>
-#endif
 #include <asm/bfin5xx_spi.h>
 #include <asm/cplb.h>
 #include <asm/dma.h>
@@ -268,6 +266,16 @@ static struct resource musb_resources[] = {
        },
 };
 
+static struct musb_hdrc_config musb_config = {
+       .multipoint     = 0,
+       .dyn_fifo       = 0,
+       .soft_con       = 1,
+       .dma            = 1,
+       .num_eps        = 7,
+       .dma_channels   = 7,
+       .gpio_vrsel     = GPIO_PH6,
+};
+
 static struct musb_hdrc_platform_data musb_plat = {
 #if defined(CONFIG_USB_MUSB_OTG)
        .mode           = MUSB_OTG,
@@ -276,7 +284,7 @@ static struct musb_hdrc_platform_data musb_plat = {
 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
        .mode           = MUSB_PERIPHERAL,
 #endif
-       .multipoint     = 0,
+       .config         = &musb_config,
 };
 
 static u64 musb_dmamask = ~(u32)0;

diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 3935769..d22515d 100644 (file)
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -38,9 +38,7 @@
 #include <linux/irq.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 #include <linux/usb/musb.h>
-#endif
 #include <asm/bfin5xx_spi.h>
 #include <asm/cplb.h>
 #include <asm/dma.h>
@@ -314,6 +312,16 @@ static struct resource musb_resources[] = {
        },
 };
 
+static struct musb_hdrc_config musb_config = {
+       .multipoint     = 0,
+       .dyn_fifo       = 0,
+       .soft_con       = 1,
+       .dma            = 1,
+       .num_eps        = 7,
+       .dma_channels   = 7,
+       .gpio_vrsel     = GPIO_PE7,
+};
+
 static struct musb_hdrc_platform_data musb_plat = {
 #if defined(CONFIG_USB_MUSB_OTG)
        .mode           = MUSB_OTG,
@@ -322,7 +330,7 @@ static struct musb_hdrc_platform_data musb_plat = {
 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
        .mode           = MUSB_PERIPHERAL,
 #endif
-       .multipoint     = 0,
+       .config         = &musb_config,
 };
 
 static u64 musb_dmamask = ~(u32)0;