drm/i915: Fix pipe config warnings when dealing with LVDS fixed mode
authorVille Syrjälä <ville.syrjala@linux.intel.com>
Mon, 2 Sep 2013 18:13:39 +0000 (21:13 +0300)
committerDaniel Vetter <daniel.vetter@ffwll.ch>
Tue, 3 Sep 2013 17:18:00 +0000 (19:18 +0200)
intel_fixed_panel_mode() overwrote the adjusted_mode with the fixed mode
only partially. Notably it forgot to copy over the sync flags. The LVDS code however programmed the hardware with the sync flags from fixed mode, and then later the pipe config comparison obviously failed as we
filled out the adjusted_mode in get_config from the real registers.

Just call drm_mode_copy() in intel_fixed_panel_mode() to copy over the
whole thing, and then just use adjusted_mode in the LVDS code to figure
out which sync settings the hardware needs.

Also constify the fixed_mode argument to intel_fixed_panel_mode().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drivers/gpu/drm/i915/intel_drv.h
drivers/gpu/drm/i915/intel_lvds.c
drivers/gpu/drm/i915/intel_panel.c

index 1760808..dbfe5f7 100644 (file)
@@ -551,7 +551,7 @@ extern int intel_panel_init(struct intel_panel *panel,
                            struct drm_display_mode *fixed_mode);
 extern void intel_panel_fini(struct intel_panel *panel);
 
-extern void intel_fixed_panel_mode(struct drm_display_mode *fixed_mode,
+extern void intel_fixed_panel_mode(const struct drm_display_mode *fixed_mode,
                                   struct drm_display_mode *adjusted_mode);
 extern void intel_pch_panel_fitting(struct intel_crtc *crtc,
                                    struct intel_crtc_config *pipe_config,
index 4d33278..831a5c0 100644 (file)
@@ -128,8 +128,8 @@ static void intel_pre_enable_lvds(struct intel_encoder *encoder)
        struct drm_device *dev = encoder->base.dev;
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
-       struct drm_display_mode *fixed_mode =
-               lvds_encoder->attached_connector->base.panel.fixed_mode;
+       const struct drm_display_mode *adjusted_mode =
+               &crtc->config.adjusted_mode;
        int pipe = crtc->pipe;
        u32 temp;
 
@@ -183,9 +183,9 @@ static void intel_pre_enable_lvds(struct intel_encoder *encoder)
                        temp &= ~LVDS_ENABLE_DITHER;
        }
        temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
-       if (fixed_mode->flags & DRM_MODE_FLAG_NHSYNC)
+       if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
                temp |= LVDS_HSYNC_POLARITY;
-       if (fixed_mode->flags & DRM_MODE_FLAG_NVSYNC)
+       if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
                temp |= LVDS_VSYNC_POLARITY;
 
        I915_WRITE(lvds_encoder->reg, temp);
index 913cb9d..42114ec 100644 (file)
 #define PCI_LBPC 0xf4 /* legacy/combination backlight modes */
 
 void
-intel_fixed_panel_mode(struct drm_display_mode *fixed_mode,
+intel_fixed_panel_mode(const struct drm_display_mode *fixed_mode,
                       struct drm_display_mode *adjusted_mode)
 {
-       adjusted_mode->hdisplay = fixed_mode->hdisplay;
-       adjusted_mode->hsync_start = fixed_mode->hsync_start;
-       adjusted_mode->hsync_end = fixed_mode->hsync_end;
-       adjusted_mode->htotal = fixed_mode->htotal;
-
-       adjusted_mode->vdisplay = fixed_mode->vdisplay;
-       adjusted_mode->vsync_start = fixed_mode->vsync_start;
-       adjusted_mode->vsync_end = fixed_mode->vsync_end;
-       adjusted_mode->vtotal = fixed_mode->vtotal;
-
-       adjusted_mode->clock = fixed_mode->clock;
+       drm_mode_copy(adjusted_mode, fixed_mode);
 
        drm_mode_set_crtcinfo(adjusted_mode, 0);
 }