int num_channel_mode;
/* PCM information */
- struct hda_pcm pcm_rec[2]; /* used in alc_build_pcms() */
+ struct hda_pcm pcm_rec[3]; /* used in alc_build_pcms() */
/* dynamic controls, init_verbs and input_mux */
struct auto_pin_cfg autocfg;
spec->num_channel_mode, &spec->multiout.max_channels);
}
-
/*
- * Control of pin widget settings via the mixer. Only boolean settings are
- * supported, so VrefEn can't be controlled using these functions as they
- * stand.
+ * Control the mode of pin widget settings via the mixer. "pc" is used
+ * instead of "%" to avoid consequences of accidently treating the % as
+ * being part of a format specifier. Maximum allowed length of a value is
+ * 63 characters plus NULL terminator.
+ */
+static char *alc_pin_mode_names[] = {
+ "Line in", "Mic 80pc bias", "Mic 50pc bias",
+ "Line out", "Headphone out",
+};
+static unsigned char alc_pin_mode_values[] = {
+ PIN_IN, PIN_VREF80, PIN_VREF50, PIN_OUT, PIN_HP,
+};
+/* The control can present all 5 options, or it can limit the options based
+ * in the pin being assumed to be exclusively an input or an output pin.
*/
-static int alc_pinctl_switch_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
+#define ALC_PIN_DIR_IN 0x00
+#define ALC_PIN_DIR_OUT 0x01
+#define ALC_PIN_DIR_INOUT 0x02
+
+/* Info about the pin modes supported by the three different pin directions.
+ * For each direction the minimum and maximum values are given.
+ */
+static signed char alc_pin_mode_dir_info[3][2] = {
+ { 0, 2 }, /* ALC_PIN_DIR_IN */
+ { 3, 4 }, /* ALC_PIN_DIR_OUT */
+ { 0, 4 }, /* ALC_PIN_DIR_INOUT */
+};
+#define alc_pin_mode_min(_dir) (alc_pin_mode_dir_info[_dir][0])
+#define alc_pin_mode_max(_dir) (alc_pin_mode_dir_info[_dir][1])
+#define alc_pin_mode_n_items(_dir) \
+ (alc_pin_mode_max(_dir)-alc_pin_mode_min(_dir)+1)
+
+static int alc_pin_mode_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
{
- uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ unsigned int item_num = uinfo->value.enumerated.item;
+ unsigned char dir = (kcontrol->private_value >> 16) & 0xff;
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
uinfo->count = 1;
- uinfo->value.integer.min = 0;
- uinfo->value.integer.max = 1;
+ uinfo->value.enumerated.items = alc_pin_mode_n_items(dir);
+
+ if (item_num<alc_pin_mode_min(dir) || item_num>alc_pin_mode_max(dir))
+ item_num = alc_pin_mode_min(dir);
+ strcpy(uinfo->value.enumerated.name, alc_pin_mode_names[item_num]);
return 0;
}
-static int alc_pinctl_switch_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+static int alc_pin_mode_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
{
+ unsigned int i;
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
hda_nid_t nid = kcontrol->private_value & 0xffff;
- long mask = (kcontrol->private_value >> 16) & 0xff;
+ unsigned char dir = (kcontrol->private_value >> 16) & 0xff;
long *valp = ucontrol->value.integer.value;
+ unsigned int pinctl = snd_hda_codec_read(codec,nid,0,AC_VERB_GET_PIN_WIDGET_CONTROL,0x00);
- *valp = 0;
- if (snd_hda_codec_read(codec,nid,0,AC_VERB_GET_PIN_WIDGET_CONTROL,0x00) & mask)
- *valp = 1;
+ /* Find enumerated value for current pinctl setting */
+ i = alc_pin_mode_min(dir);
+ while (alc_pin_mode_values[i]!=pinctl && i<=alc_pin_mode_max(dir))
+ i++;
+ *valp = i<=alc_pin_mode_max(dir)?i:alc_pin_mode_min(dir);
return 0;
}
-static int alc_pinctl_switch_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
+static int alc_pin_mode_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
{
+ signed int change;
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
hda_nid_t nid = kcontrol->private_value & 0xffff;
- long mask = (kcontrol->private_value >> 16) & 0xff;
- long *valp = ucontrol->value.integer.value;
+ unsigned char dir = (kcontrol->private_value >> 16) & 0xff;
+ long val = *ucontrol->value.integer.value;
unsigned int pinctl = snd_hda_codec_read(codec,nid,0,AC_VERB_GET_PIN_WIDGET_CONTROL,0x00);
- int change = ((pinctl & mask)!=0) != *valp;
+ if (val<alc_pin_mode_min(dir) || val>alc_pin_mode_max(dir))
+ val = alc_pin_mode_min(dir);
+
+ change = pinctl != alc_pin_mode_values[val];
if (change)
snd_hda_codec_write(codec,nid,0,AC_VERB_SET_PIN_WIDGET_CONTROL,
- *valp?(pinctl|mask):(pinctl&~mask));
+ alc_pin_mode_values[val]);
return change;
}
-#define ALC_PINCTL_SWITCH(xname, nid, mask) \
+#define ALC_PIN_MODE(xname, nid, dir) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \
- .info = alc_pinctl_switch_info, \
- .get = alc_pinctl_switch_get, \
- .put = alc_pinctl_switch_put, \
- .private_value = (nid) | (mask<<16) }
-
+ .info = alc_pin_mode_info, \
+ .get = alc_pin_mode_get, \
+ .put = alc_pin_mode_put, \
+ .private_value = nid | (dir<<16) }
/*
* set up from the preset table
/* NID is set in alc_build_pcms */
};
+/* Used by alc_build_pcms to flag that a PCM has no playback stream */
+static struct hda_pcm_stream alc_pcm_null_playback = {
+ .substreams = 0,
+ .channels_min = 0,
+ .channels_max = 0,
+};
+
static int alc_build_pcms(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
}
}
+ /* If the use of more than one ADC is requested for the current
+ * model, configure a second analog capture-only PCM.
+ */
+ if (spec->num_adc_nids > 1) {
+ codec->num_pcms++;
+ info++;
+ info->name = spec->stream_name_analog;
+ /* No playback stream for second PCM */
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK] = alc_pcm_null_playback;
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = 0;
+ if (spec->stream_analog_capture) {
+ snd_assert(spec->adc_nids, return -EINVAL);
+ info->stream[SNDRV_PCM_STREAM_CAPTURE] = *(spec->stream_analog_capture);
+ info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adc_nids[1];
+ }
+ }
+
if (spec->multiout.dig_out_nid || spec->dig_in_nid) {
codec->num_pcms++;
info++;
0x05, 0x04
};
+static hda_nid_t alc260_fujitsu_adc_nids[2] = {
+ /* ADC0, ADC1 */
+ 0x04, 0x05
+};
+
#define ALC260_DIGOUT_NID 0x03
#define ALC260_DIGIN_NID 0x06
* and the internal CD lines.
*/
static struct hda_input_mux alc260_fujitsu_capture_source = {
- .num_items = 2,
+ .num_items = 3,
.items = {
{ "Mic/Line", 0x0 },
{ "CD", 0x4 },
+ { "Headphone", 0x2 },
},
};
static struct snd_kcontrol_new alc260_fujitsu_mixer[] = {
HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("Headphone Playback Switch", 0x08, 2, HDA_INPUT),
- ALC_PINCTL_SWITCH("Headphone Amp Switch", 0x14, PIN_HP_AMP),
+ ALC_PIN_MODE("Headphone Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
HDA_CODEC_VOLUME("Mic/Line Playback Volume", 0x07, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Mic/Line Playback Switch", 0x07, 0x0, HDA_INPUT),
+ ALC_PIN_MODE("Mic/Line Jack Mode", 0x12, ALC_PIN_DIR_IN),
HDA_CODEC_VOLUME("Beep Playback Volume", 0x07, 0x05, HDA_INPUT),
HDA_CODEC_MUTE("Beep Playback Switch", 0x07, 0x05, HDA_INPUT),
HDA_CODEC_VOLUME("Internal Speaker Playback Volume", 0x09, 0x0, HDA_OUTPUT),
{0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
{0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
+ /* Ensure Line1 pin widget takes its input from the OUT1 sum bus
+ * when acting as an output.
+ */
+ {0x0d, AC_VERB_SET_CONNECT_SEL, 0},
+
/* Start with mixer outputs muted */
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* Unmute Line1 pin widget amp left and right (no equiv mixer ctrl) */
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Unmute Line1 pin widget input for when this pin is used as input
+ * (no equiv mixer ctrl). Having input and output unmuted doesn't
+ * seem to cause a problem.
+ */
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* Unmute pin widget used for Line-in (no equiv mixer ctrl) */
{0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* Mute capture amp left and right */
{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- /* Set ADC connection select to line in (on mic1 pin) */
+ /* Set ADC connection select to match default mixer setting - line
+ * in (on mic1 pin)
+ */
{0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* Do the same for the second ADC: mute capture input amp and
+ * set ADC connection to line in
+ */
+ {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
+
/* Mute all inputs to mixer widget (even unconnected ones) */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
.init_verbs = { alc260_fujitsu_init_verbs },
.num_dacs = ARRAY_SIZE(alc260_dac_nids),
.dac_nids = alc260_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc260_adc_nids),
- .adc_nids = alc260_adc_nids,
+ .num_adc_nids = ARRAY_SIZE(alc260_fujitsu_adc_nids),
+ .adc_nids = alc260_fujitsu_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc260_modes),
.channel_mode = alc260_modes,
.input_mux = &alc260_fujitsu_capture_source,
git.openpandora.org / pandora-kernel.git / commitdiff