#endif
#if defined(CONFIG_USB_ULPI)
+static int eukrea_cpuimx27_otg_init(struct platform_device *pdev)
+{
+ return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
static struct mxc_usbh_platform_data otg_pdata __initdata = {
+ .init = eukrea_cpuimx27_otg_init,
.portsc = MXC_EHCI_MODE_ULPI,
- .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
+static int eukrea_cpuimx27_usbh2_init(struct platform_device *pdev)
+{
+ return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
+ .init = eukrea_cpuimx27_usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI,
- .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
#endif
},
};
+static int eukrea_cpuimx25_otg_init(struct platform_device *pdev)
+{
+ return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
static const struct mxc_usbh_platform_data otg_pdata __initconst = {
+ .init = eukrea_cpuimx25_otg_init,
.portsc = MXC_EHCI_MODE_UTMI,
- .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
+static int eukrea_cpuimx25_usbh2_init(struct platform_device *pdev)
+{
+ return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
+ MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
+}
+
static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
+ .init = eukrea_cpuimx25_usbh2_init,
.portsc = MXC_EHCI_MODE_SERIAL,
- .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
- MXC_EHCI_IPPUE_DOWN,
};
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/gpio.h>
+#include <linux/delay.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
static int otg_phy_init(struct platform_device *pdev)
{
gpio_set_value(OTG_PHY_CS_GPIO, 0);
- return 0;
+
+ mdelay(10);
+
+ return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
static const struct mxc_usbh_platform_data
visstrim_m10_usbotg_pdata __initconst = {
.init = otg_phy_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
- .flags = MXC_EHCI_POWER_PINS_ENABLED,
};
static void __init visstrim_m10_board_init(void)
.keymap_size = ARRAY_SIZE(mx25pdk_keymap),
};
+static int mx25pdk_usbh2_init(struct platform_device *pdev)
+{
+ return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
+}
+
static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
+ .init = mx25pdk_usbh2_init,
.portsc = MXC_EHCI_MODE_SERIAL,
- .flags = MXC_EHCI_INTERNAL_PHY,
};
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
}
#if defined(CONFIG_USB_ULPI)
+static int mx27_3ds_otg_init(struct platform_device *pdev)
+{
+ return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
static struct mxc_usbh_platform_data otg_pdata __initdata = {
+ .init = mx27_3ds_otg_init,
.portsc = MXC_EHCI_MODE_ULPI,
- .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
#endif
static int otg_phy_init(struct platform_device *pdev)
{
gpio_set_value(OTG_PHY_CS_GPIO, 0);
- return 0;
+
+ mdelay(10);
+
+ return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
}
static struct mxc_usbh_platform_data otg_pdata __initdata = {
.init = otg_phy_init,
.portsc = MXC_EHCI_MODE_ULPI,
- .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
static int usbh2_phy_init(struct platform_device *pdev)
{
gpio_set_value(USBH2_PHY_CS_GPIO, 0);
- return 0;
+
+ mdelay(10);
+
+ return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
}
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = usbh2_phy_init,
.portsc = MXC_EHCI_MODE_ULPI,
- .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
#endif
}
};
+static int pcm038_usbh2_init(struct platform_device *pdev)
+{
+ return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+ MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
+ .init = pcm038_usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI,
- .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
};
static void __init pcm038_init(void)
gpio_set_value(OTG_RESET, 0/*LOW*/);
mdelay(5);
gpio_set_value(OTG_RESET, 1/*HIGH*/);
+ mdelay(10);
- return 0;
+ return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+ MXC_EHCI_INTERFACE_DIFF_UNI);
otg_free_reset:
gpio_free(OTG_RESET);
gpio_set_value(USBH2_RESET, 0/*LOW*/);
mdelay(5);
gpio_set_value(USBH2_RESET, 1/*HIGH*/);
+ mdelay(10);
- return 0;
+ return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+ MXC_EHCI_INTERFACE_DIFF_UNI);
h2_free_reset:
gpio_free(USBH2_RESET);
static struct mxc_usbh_platform_data usbotg_pdata __initdata = {
.init = usbotg_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
- .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
};
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
- .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
};
#endif /* CONFIG_USB_ULPI */
.flash_bbt = 1,
};
+static int eukrea_cpuimx35_otg_init(struct platform_device *pdev)
+{
+ return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
static const struct mxc_usbh_platform_data otg_pdata __initconst = {
+ .init = eukrea_cpuimx35_otg_init,
.portsc = MXC_EHCI_MODE_UTMI,
- .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
+static int eukrea_cpuimx35_usbh1_init(struct platform_device *pdev)
+{
+ return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
+ MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
+}
+
static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
+ .init = eukrea_cpuimx35_usbh1_init,
.portsc = MXC_EHCI_MODE_SERIAL,
- .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
- MXC_EHCI_IPPUE_DOWN,
};
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
return err;
}
-static int __maybe_unused mx31_3ds_host2_init(struct platform_device *pdev)
+#if defined(CONFIG_USB_ULPI)
+static int mx31_3ds_otg_init(struct platform_device *pdev)
+{
+ return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
+}
+
+static int mx31_3ds_host2_init(struct platform_device *pdev)
{
int err;
mdelay(1);
gpio_set_value(USBH2_RST_B, 1);
- return 0;
+
+ mdelay(10);
+
+ return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
usbotg_free_reset:
gpio_free(USBH2_RST_B);
return err;
}
-#if defined(CONFIG_USB_ULPI)
static struct mxc_usbh_platform_data otg_pdata __initdata = {
+ .init = mx31_3ds_otg_init,
.portsc = MXC_EHCI_MODE_ULPI,
- .flags = MXC_EHCI_POWER_PINS_ENABLED,
};
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = mx31_3ds_host2_init,
.portsc = MXC_EHCI_MODE_ULPI,
- .flags = MXC_EHCI_POWER_PINS_ENABLED,
};
#endif
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/gpio.h>
+#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/smsc911x.h>
gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), "USBH1 CS");
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), 0);
- return 0;
+ mdelay(10);
+
+ return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
static int usbh1_init(struct platform_device *pdev)
mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
- return 0;
+ mdelay(10);
+
+ return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+ MXC_EHCI_INTERFACE_SINGLE_UNI);
}
static int usbh2_init(struct platform_device *pdev)
gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
- return 0;
+ mdelay(10);
+
+ return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
static struct mxc_usbh_platform_data usbotg_pdata = {
.init = usbotg_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
- .flags = MXC_EHCI_POWER_PINS_ENABLED,
};
static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
.init = usbh1_init,
.portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
- .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
};
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
- .flags = MXC_EHCI_POWER_PINS_ENABLED,
};
static void lilly1131_usb_init(void)
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
- return 0;
+ mdelay(10);
+
+ return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
- .flags = MXC_EHCI_POWER_PINS_ENABLED,
};
#endif
}
#if defined(CONFIG_USB_ULPI)
+static int moboard_usbh2_init_hw(struct platform_device *pdev)
+{
+ return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
+}
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
+ .init = moboard_usbh2_init_hw,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
- .flags = MXC_EHCI_POWER_PINS_ENABLED,
};
static int __init moboard_usbh2_init(void)
MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
};
+static int mx35_3ds_otg_init(struct platform_device *pdev)
+{
+ return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
+}
+
/* OTG config */
static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
};
static struct mxc_usbh_platform_data otg_pdata __initdata = {
+ .init = mx35_3ds_otg_init,
.portsc = MXC_EHCI_MODE_UTMI,
- .flags = MXC_EHCI_INTERNAL_PHY,
};
+static int mx35_3ds_usbh_init(struct platform_device *pdev)
+{
+ return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
+ MXC_EHCI_INTERNAL_PHY);
+}
+
/* USB HOST config */
static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
+ .init = mx35_3ds_usbh_init,
.portsc = MXC_EHCI_MODE_SERIAL,
- .flags = MXC_EHCI_INTERFACE_SINGLE_UNI |
- MXC_EHCI_INTERNAL_PHY,
};
static int otg_mode_host;
};
#if defined(CONFIG_USB_ULPI)
+static int pcm037_otg_init(struct platform_device *pdev)
+{
+ return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
static struct mxc_usbh_platform_data otg_pdata __initdata = {
+ .init = pcm037_otg_init,
.portsc = MXC_EHCI_MODE_ULPI,
- .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
+static int pcm037_usbh2_init(struct platform_device *pdev)
+{
+ return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
+ .init = pcm037_usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI,
- .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
#endif
};
#if defined(CONFIG_USB_ULPI)
+static int pcm043_otg_init(struct platform_device *pdev)
+{
+ return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
+
static struct mxc_usbh_platform_data otg_pdata __initdata = {
+ .init = pcm043_otg_init,
.portsc = MXC_EHCI_MODE_UTMI,
- .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
#endif
+static int pcm043_usbh1_init(struct platform_device *pdev)
+{
+ return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
+ MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
+}
+
static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
+ .init = pcm043_usbh1_init,
.portsc = MXC_EHCI_MODE_SERIAL,
- .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
- MXC_EHCI_IPPUE_DOWN,
};
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/types.h>
mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
- return 0;
+ mdelay(10);
+
+ return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+ MXC_EHCI_INTERFACE_SINGLE_UNI);
}
#define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
.init = devboard_usbh1_hw_init,
.portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
- .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
};
static int __init devboard_usbh1_init(void)
mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
- return 0;
+ mdelay(10);
+
+ return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
+ MXC_EHCI_INTERFACE_SINGLE_UNI);
}
#define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
.init = marxbot_usbh1_hw_init,
.portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
- .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
};
static int __init marxbot_usbh1_init(void)
#if defined(CONFIG_USB_ULPI)
+static int smartbot_otg_init(struct platform_device *pdev)
+{
+ return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
+}
+
static struct mxc_usbh_platform_data otg_host_pdata __initdata = {
+ .init = smartbot_otg_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
- .flags = MXC_EHCI_POWER_PINS_ENABLED,
};
static int __init smartbot_otg_host_init(void)
v |= MX51_USB_PLL_DIV_19_2_MHZ;
__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
iounmap(usb_base);
- return 0;
+
+ mdelay(10);
+
+ return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
}
static int initialize_usbh1_port(struct platform_device *pdev)
v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
iounmap(usb_base);
- return 0;
+
+ mdelay(10);
+
+ return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
+ MXC_EHCI_ITC_NO_THRESHOLD);
}
static struct mxc_usbh_platform_data dr_utmi_config = {
.init = initialize_otg_port,
.portsc = MXC_EHCI_UTMI_16BIT,
- .flags = MXC_EHCI_INTERNAL_PHY,
};
static struct fsl_usb2_platform_data usb_pdata = {
static struct mxc_usbh_platform_data usbh1_config = {
.init = initialize_usbh1_port,
.portsc = MXC_EHCI_MODE_ULPI,
- .flags = (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
};
static int otg_mode_host;
v |= MX51_USB_PLL_DIV_19_2_MHZ;
__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
iounmap(usb_base);
- return 0;
+
+ mdelay(10);
+
+ return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
}
static int initialize_usbh1_port(struct platform_device *pdev)
__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
usbother_base + MX51_USB_CTRL_1_OFFSET);
iounmap(usb_base);
- return 0;
+
+ mdelay(10);
+
+ return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
+ MXC_EHCI_ITC_NO_THRESHOLD);
}
static struct mxc_usbh_platform_data dr_utmi_config = {
.init = initialize_otg_port,
.portsc = MXC_EHCI_UTMI_16BIT,
- .flags = MXC_EHCI_INTERNAL_PHY,
};
static struct fsl_usb2_platform_data usb_pdata = {
static struct mxc_usbh_platform_data usbh1_config = {
.init = initialize_usbh1_port,
.portsc = MXC_EHCI_MODE_ULPI,
- .flags = (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
};
static int otg_mode_host;
v |= MX51_USB_PLL_DIV_19_2_MHZ;
__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
iounmap(usb_base);
- return 0;
+
+ mdelay(10);
+
+ return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
}
static int initialize_usbh1_port(struct platform_device *pdev)
v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
iounmap(usb_base);
- return 0;
+
+ mdelay(10);
+
+ return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
+ MXC_EHCI_ITC_NO_THRESHOLD);
}
static struct mxc_usbh_platform_data dr_utmi_config = {
.init = initialize_otg_port,
.portsc = MXC_EHCI_UTMI_16BIT,
- .flags = MXC_EHCI_INTERNAL_PHY,
};
static struct fsl_usb2_platform_data usb_pdata = {
static struct mxc_usbh_platform_data usbh1_config = {
.init = initialize_usbh1_port,
.portsc = MXC_EHCI_MODE_ULPI,
- .flags = (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
};
static int otg_mode_host;
v |= MX51_USB_PLL_DIV_24_MHZ;
__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
iounmap(usb_base);
- return 0;
+
+ mdelay(10);
+
+ return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
}
static struct mxc_usbh_platform_data dr_utmi_config = {
.init = initialize_otg_port,
.portsc = MXC_EHCI_UTMI_16BIT,
- .flags = MXC_EHCI_INTERNAL_PHY,
};
/* PCBID2 PCBID1 PCBID0 STATE
obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
obj-$(CONFIG_MXC_PWM) += pwm.o
-obj-$(CONFIG_USB_EHCI_MXC) += ehci.o
obj-$(CONFIG_MXC_ULPI) += ulpi.o
obj-$(CONFIG_MXC_USE_EPIT) += epit.o
obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
+++ /dev/null
-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- */
-
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
-
-int mxc_initialize_usb_hw(int port, unsigned int flags)
-{
-#if defined(CONFIG_SOC_IMX25)
- if (cpu_is_mx25())
- return mx25_initialize_usb_hw(port, flags);
-#endif /* if defined(CONFIG_SOC_IMX25) */
-#if defined(CONFIG_ARCH_MX3)
- if (cpu_is_mx31())
- return mx31_initialize_usb_hw(port, flags);
- if (cpu_is_mx35())
- return mx35_initialize_usb_hw(port, flags);
-#endif /* CONFIG_ARCH_MX3 */
-#ifdef CONFIG_MACH_MX27
- if (cpu_is_mx27())
- return mx27_initialize_usb_hw(port, flags);
-#endif /* CONFIG_MACH_MX27 */
-#ifdef CONFIG_SOC_IMX51
- if (cpu_is_mx51())
- return mx51_initialize_usb_hw(port, flags);
-#endif
- printk(KERN_WARNING
- "%s() unable to setup USBCONTROL for this CPU\n", __func__);
- return -EINVAL;
-}
-EXPORT_SYMBOL(mxc_initialize_usb_hw);
-
int (*exit)(struct platform_device *pdev);
unsigned int portsc;
- unsigned int flags;
struct otg_transceiver *otg;
};
-int mxc_initialize_usb_hw(int port, unsigned int flags);
-
int mx51_initialize_usb_hw(int port, unsigned int flags);
int mx25_initialize_usb_hw(int port, unsigned int flags);
int mx31_initialize_usb_hw(int port, unsigned int flags);
mdelay(10);
}
- /* setup specific usb hw */
- ret = mxc_initialize_usb_hw(pdev->id, pdata->flags);
- if (ret < 0)
- goto err_init;
-
ehci = hcd_to_ehci(hcd);
/* EHCI registers start at offset 0x100 */
git.openpandora.org / pandora-kernel.git / commitdiff