mac80211: move dynamic PS timeout to hardware config
authorJohannes Berg <johannes@sipsolutions.net>
Tue, 6 Jan 2009 17:13:18 +0000 (18:13 +0100)
committerJohn W. Linville <linville@tuxdriver.com>
Thu, 29 Jan 2009 20:59:56 +0000 (15:59 -0500)
This will be needed for drivers that set the
IEEE80211_HW_NO_STACK_DYNAMIC_PS flag and still
want to handle dynamic PS.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
include/net/mac80211.h
net/mac80211/ieee80211_i.h
net/mac80211/mlme.c
net/mac80211/tx.c
net/mac80211/wext.c

index 76537f1..83ee8a2 100644 (file)
@@ -515,6 +515,7 @@ static inline int __deprecated __IEEE80211_CONF_SHORT_SLOT_TIME(void)
  * @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed
  * @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed
  * @IEEE80211_CONF_CHANGE_PS: the PS flag changed
+ * @IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT: the dynamic PS timeout changed
  * @IEEE80211_CONF_CHANGE_POWER: the TX power changed
  * @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed
  * @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed
@@ -525,9 +526,10 @@ enum ieee80211_conf_changed {
        IEEE80211_CONF_CHANGE_LISTEN_INTERVAL   = BIT(2),
        IEEE80211_CONF_CHANGE_RADIOTAP          = BIT(3),
        IEEE80211_CONF_CHANGE_PS                = BIT(4),
-       IEEE80211_CONF_CHANGE_POWER             = BIT(5),
-       IEEE80211_CONF_CHANGE_CHANNEL           = BIT(6),
-       IEEE80211_CONF_CHANGE_RETRY_LIMITS      = BIT(7),
+       IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT     = BIT(5),
+       IEEE80211_CONF_CHANGE_POWER             = BIT(6),
+       IEEE80211_CONF_CHANGE_CHANNEL           = BIT(7),
+       IEEE80211_CONF_CHANGE_RETRY_LIMITS      = BIT(8),
 };
 
 /**
@@ -540,6 +542,7 @@ enum ieee80211_conf_changed {
  * @listen_interval: listen interval in units of beacon interval
  * @flags: configuration flags defined above
  * @power_level: requested transmit power (in dBm)
+ * @dynamic_ps_timeout: dynamic powersave timeout (in ms)
  * @channel: the channel to tune to
  * @channel_type: the channel (HT) type
  * @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame
@@ -552,7 +555,7 @@ enum ieee80211_conf_changed {
 struct ieee80211_conf {
        int beacon_int;
        u32 flags;
-       int power_level;
+       int power_level, dynamic_ps_timeout;
 
        u16 listen_interval;
        bool radio_enabled;
index fa5ca14..3db6bc3 100644 (file)
@@ -700,7 +700,6 @@ struct ieee80211_local {
        unsigned int wmm_acm; /* bit field of ACM bits (BIT(802.1D tag)) */
 
        bool powersave;
-       int dynamic_ps_timeout;
        struct work_struct dynamic_ps_enable_work;
        struct work_struct dynamic_ps_disable_work;
        struct timer_list dynamic_ps_timer;
index 6a90171..7709e76 100644 (file)
@@ -777,9 +777,10 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
 
        if (local->powersave &&
                        !(local->hw.flags & IEEE80211_HW_NO_STACK_DYNAMIC_PS)) {
-               if (local->dynamic_ps_timeout > 0)
+               if (local->hw.conf.dynamic_ps_timeout > 0)
                        mod_timer(&local->dynamic_ps_timer, jiffies +
-                                 msecs_to_jiffies(local->dynamic_ps_timeout));
+                                 msecs_to_jiffies(
+                                       local->hw.conf.dynamic_ps_timeout));
                else {
                        ieee80211_send_nullfunc(local, sdata, 1);
                        conf->flags |= IEEE80211_CONF_PS;
index 96eca34..b18a726 100644 (file)
@@ -1296,7 +1296,7 @@ int ieee80211_master_start_xmit(struct sk_buff *skb, struct net_device *dev)
        }
 
        if (!(local->hw.flags & IEEE80211_HW_NO_STACK_DYNAMIC_PS) &&
-           local->dynamic_ps_timeout > 0) {
+           local->hw.conf.dynamic_ps_timeout > 0) {
                if (local->hw.conf.flags & IEEE80211_CONF_PS) {
                        ieee80211_stop_queues_by_reason(&local->hw,
                                        IEEE80211_QUEUE_STOP_REASON_PS);
@@ -1305,7 +1305,7 @@ int ieee80211_master_start_xmit(struct sk_buff *skb, struct net_device *dev)
                }
 
                mod_timer(&local->dynamic_ps_timer, jiffies +
-                               msecs_to_jiffies(local->dynamic_ps_timeout));
+                       msecs_to_jiffies(local->hw.conf.dynamic_ps_timeout));
        }
 
        memset(info, 0, sizeof(*info));
index 3fc1b90..3f2db0b 100644 (file)
@@ -863,17 +863,19 @@ static int ieee80211_ioctl_siwpower(struct net_device *dev,
                timeout = wrq->value / 1000;
 
 set:
-       if (ps == local->powersave && timeout == local->dynamic_ps_timeout)
+       if (ps == local->powersave && timeout == conf->dynamic_ps_timeout)
                return ret;
 
        local->powersave = ps;
-       local->dynamic_ps_timeout = timeout;
+       conf->dynamic_ps_timeout = timeout;
 
-       if (!(local->hw.flags & IEEE80211_HW_NO_STACK_DYNAMIC_PS) &&
-                       (sdata->u.sta.flags & IEEE80211_STA_ASSOCIATED)) {
-               if (local->dynamic_ps_timeout > 0)
+       if (local->hw.flags & IEEE80211_HW_NO_STACK_DYNAMIC_PS) {
+               ret = ieee80211_hw_config(local,
+                                         IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT);
+       } else if (sdata->u.sta.flags & IEEE80211_STA_ASSOCIATED) {
+               if (conf->dynamic_ps_timeout > 0)
                        mod_timer(&local->dynamic_ps_timer, jiffies +
-                                 msecs_to_jiffies(local->dynamic_ps_timeout));
+                                 msecs_to_jiffies(conf->dynamic_ps_timeout));
                else {
                        if (local->powersave) {
                                ieee80211_send_nullfunc(local, sdata, 1);