-What: /sys/bus/usb/drivers/usbtmc/devices/*/interface_capabilities
-What: /sys/bus/usb/drivers/usbtmc/devices/*/device_capabilities
+What: /sys/bus/usb/drivers/usbtmc/*/interface_capabilities
+What: /sys/bus/usb/drivers/usbtmc/*/device_capabilities
Date: August 2008
Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Description:
The files are read only.
-What: /sys/bus/usb/drivers/usbtmc/devices/*/usb488_interface_capabilities
-What: /sys/bus/usb/drivers/usbtmc/devices/*/usb488_device_capabilities
+What: /sys/bus/usb/drivers/usbtmc/*/usb488_interface_capabilities
+What: /sys/bus/usb/drivers/usbtmc/*/usb488_device_capabilities
Date: August 2008
Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Description:
The files are read only.
-What: /sys/bus/usb/drivers/usbtmc/devices/*/TermChar
+What: /sys/bus/usb/drivers/usbtmc/*/TermChar
Date: August 2008
Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Description:
sent to the device or not.
-What: /sys/bus/usb/drivers/usbtmc/devices/*/TermCharEnabled
+What: /sys/bus/usb/drivers/usbtmc/*/TermCharEnabled
Date: August 2008
Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Description:
published by the USB-IF.
-What: /sys/bus/usb/drivers/usbtmc/devices/*/auto_abort
+What: /sys/bus/usb/drivers/usbtmc/*/auto_abort
Date: August 2008
Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Description:
Features:
- accounting anonymous pages, file caches, swap caches usage and limiting them.
- - private LRU and reclaim routine. (system's global LRU and private LRU
- work independently from each other)
+ - pages are linked to per-memcg LRU exclusively, and there is no global LRU.
- optionally, memory+swap usage can be accounted and limited.
- hierarchical accounting
- soft limit
2.2.1 Accounting details
All mapped anon pages (RSS) and cache pages (Page Cache) are accounted.
-Some pages which are never reclaimable and will not be on the global LRU
+Some pages which are never reclaimable and will not be on the LRU
are not accounted. We just account pages under usual VM management.
RSS pages are accounted at page_fault unless they've already been accounted
of ASLR. It was only ever intended for debugging, so it should be
removed.
Who: Kees Cook <keescook@chromium.org>
+
+----------------------------
+
+What: setitimer accepts user NULL pointer (value)
+When: 3.6
+Why: setitimer is not returning -EFAULT if user pointer is NULL. This
+ violates the spec.
+Who: Sasikantha Babu <sasikanth.v19@gmail.com>
struct file_system_type {
const char *name;
int fs_flags;
- struct dentry (*mount) (struct file_system_type *, int,
+ struct dentry *(*mount) (struct file_system_type *, int,
const char *, void *);
void (*kill_sb) (struct super_block *);
struct module *owner;
they will get a -EPERM error. Thus you can be sure that when
usb_kill_urb() returns, the URB is totally idle.
+There is a lifetime issue to consider. An URB may complete at any
+time, and the completion handler may free the URB. If this happens
+while usb_unlink_urb or usb_kill_urb is running, it will cause a
+memory-access violation. The driver is responsible for avoiding this,
+which often means some sort of lock will be needed to prevent the URB
+from being deallocated while it is still in use.
+
+On the other hand, since usb_unlink_urb may end up calling the
+completion handler, the handler must not take any lock that is held
+when usb_unlink_urb is invoked. The general solution to this problem
+is to increment the URB's reference count while holding the lock, then
+drop the lock and call usb_unlink_urb or usb_kill_urb, and then
+decrement the URB's reference count. You increment the reference
+count by calling
+
+ struct urb *usb_get_urb(struct urb *urb)
+
+(ignore the return value; it is the same as the argument) and
+decrement the reference count by calling usb_free_urb. Of course,
+none of this is necessary if there's no danger of the URB being freed
+by the completion handler.
+
1.7. What about the completion handler?
d5ea89a0 3575914555 S Ci:1:001:0 s a3 00 0000 0003 0004 4 <
d5ea89a0 3575914560 C Ci:1:001:0 0 4 = 01050000
-An output bulk transfer to send a SCSI command 0x5E in a 31-byte Bulk wrapper
-to a storage device at address 5:
+An output bulk transfer to send a SCSI command 0x28 (READ_10) in a 31-byte
+Bulk wrapper to a storage device at address 5:
-dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 5e000000 00000000 00000600 00000000 00000000 00000000 000000
+dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 ad000000 00800000 80010a28 20000000 20000040 00000000 000000
dd65f0e8 4128379808 C Bo:1:005:2 0 31 >
* Raw binary format and API
M: Johan Hedberg <johan.hedberg@gmail.com>
L: linux-bluetooth@vger.kernel.org
W: http://www.bluez.org/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth.git
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/jh/bluetooth.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git
S: Maintained
F: drivers/bluetooth/
M: Johan Hedberg <johan.hedberg@gmail.com>
L: linux-bluetooth@vger.kernel.org
W: http://www.bluez.org/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth.git
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/jh/bluetooth.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git
S: Maintained
F: net/bluetooth/
F: include/net/bluetooth/
F: drivers/net/ethernet/myricom/myri10ge/
NATSEMI ETHERNET DRIVER (DP8381x)
-M: Tim Hockin <thockin@hockin.org>
-S: Maintained
+S: Orphan
F: drivers/net/ethernet/natsemi/natsemi.c
NATIVE INSTRUMENTS USB SOUND INTERFACE DRIVER
F: arch/arm/mach-omap2/clockdomain44xx.c
OMAP AUDIO SUPPORT
+M: Peter Ujfalusi <peter.ujfalusi@ti.com>
M: Jarkko Nikula <jarkko.nikula@bitmer.com>
L: alsa-devel@alsa-project.org (subscribers-only)
L: linux-omap@vger.kernel.org
F: include/linux/i2c-algo-pca.h
F: include/linux/i2c-pca-platform.h
+PCDP - PRIMARY CONSOLE AND DEBUG PORT
+M: Khalid Aziz <khalid.aziz@hp.com>
+S: Maintained
+F: drivers/firmware/pcdp.*
+
PCI ERROR RECOVERY
M: Linas Vepstas <linasvepstas@gmail.com>
L: linux-pci@vger.kernel.org
F: drivers/staging/olpc_dcon/
STAGING - OZMO DEVICES USB OVER WIFI DRIVER
+M: Rupesh Gujare <rgujare@ozmodevices.com>
M: Chris Kelly <ckelly@ozmodevices.com>
S: Maintained
F: drivers/staging/ozwpan/
WOLFSON MICROELECTRONICS DRIVERS
M: Mark Brown <broonie@opensource.wolfsonmicro.com>
-M: Ian Lartey <ian@opensource.wolfsonmicro.com>
-M: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
+L: patches@opensource.wolfsonmicro.com
T: git git://opensource.wolfsonmicro.com/linux-2.6-asoc
T: git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
W: http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices
/* This number is used when no interrupt has been assigned */
#define NO_IRQ 0
-struct irq_data;
-extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d);
-extern irq_hw_number_t virq_to_hw(unsigned int virq);
-
extern void __init init_pic_c64xplus(void);
extern void init_IRQ(void);
seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count);
return 0;
}
-
-irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
-{
- return d->hwirq;
-}
-EXPORT_SYMBOL_GPL(irqd_to_hwirq);
-
-irq_hw_number_t virq_to_hw(unsigned int virq)
-{
- struct irq_data *irq_data = irq_get_irq_data(virq);
- return WARN_ON(!irq_data) ? 0 : irq_data->hwirq;
-}
-EXPORT_SYMBOL_GPL(virq_to_hw);
/* Same thing, used by the generic IRQ code */
#define NR_IRQS_LEGACY NUM_ISA_INTERRUPTS
-struct irq_data;
-extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d);
extern irq_hw_number_t virq_to_hw(unsigned int virq);
/**
andi. r10,r10,MSR_EE /* Did EE change? */
beq 1f
- /* Save handler and return address into the 2 unused words
- * of the STACK_FRAME_OVERHEAD (sneak sneak sneak). Everything
- * else can be recovered from the pt_regs except r3 which for
- * normal interrupts has been set to pt_regs and for syscalls
- * is an argument, so we temporarily use ORIG_GPR3 to save it
- */
- stw r9,8(r1)
- stw r11,12(r1)
- stw r3,ORIG_GPR3(r1)
/*
* The trace_hardirqs_off will use CALLER_ADDR0 and CALLER_ADDR1.
* If from user mode there is only one stack frame on the stack, and
* accessing CALLER_ADDR1 will cause oops. So we need create a dummy
* stack frame to make trace_hardirqs_off happy.
+ *
+ * This is handy because we also need to save a bunch of GPRs,
+ * r3 can be different from GPR3(r1) at this point, r9 and r11
+ * contains the old MSR and handler address respectively,
+ * r4 & r5 can contain page fault arguments that need to be passed
+ * along as well. r12, CCR, CTR, XER etc... are left clobbered as
+ * they aren't useful past this point (aren't syscall arguments),
+ * the rest is restored from the exception frame.
*/
+ stwu r1,-32(r1)
+ stw r9,8(r1)
+ stw r11,12(r1)
+ stw r3,16(r1)
+ stw r4,20(r1)
+ stw r5,24(r1)
andi. r12,r12,MSR_PR
- beq 11f
- stwu r1,-16(r1)
+ b 11f
bl trace_hardirqs_off
- addi r1,r1,16
b 12f
-
11:
bl trace_hardirqs_off
12:
+ lwz r5,24(r1)
+ lwz r4,20(r1)
+ lwz r3,16(r1)
+ lwz r11,12(r1)
+ lwz r9,8(r1)
+ addi r1,r1,32
lwz r0,GPR0(r1)
- lwz r3,ORIG_GPR3(r1)
- lwz r4,GPR4(r1)
- lwz r5,GPR5(r1)
lwz r6,GPR6(r1)
lwz r7,GPR7(r1)
lwz r8,GPR8(r1)
- lwz r9,8(r1)
- lwz r11,12(r1)
1: mtctr r11
mtlr r9
bctr /* jump to handler */
local_irq_restore(flags);
}
-irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
-{
- return d->hwirq;
-}
-EXPORT_SYMBOL_GPL(irqd_to_hwirq);
-
irq_hw_number_t virq_to_hw(unsigned int virq)
{
struct irq_data *irq_data = irq_get_irq_data(virq);
ctrl |= CTRL_RUNLATCH;
mtspr(SPRN_CTRLT, ctrl);
- ti->local_flags |= TLF_RUNLATCH;
+ ti->local_flags |= _TLF_RUNLATCH;
}
/* Called with hard IRQs off */
struct thread_info *ti = current_thread_info();
unsigned long ctrl;
- ti->local_flags &= ~TLF_RUNLATCH;
+ ti->local_flags &= ~_TLF_RUNLATCH;
ctrl = mfspr(SPRN_CTRLF);
ctrl &= ~CTRL_RUNLATCH;
}
memset(msic->fifo_virt, 0xff, MSIC_FIFO_SIZE_BYTES);
- msic->irq_domain = irq_domain_add_nomap(dn, &msic_host_ops, msic);
+ msic->irq_domain = irq_domain_add_nomap(dn, 0, &msic_host_ops, msic);
if (!msic->irq_domain) {
printk(KERN_ERR "axon_msi: couldn't allocate irq_domain for %s\n",
dn->full_name);
ppc_md.get_irq = beatic_get_irq;
/* Allocate an irq host */
- beatic_host = irq_domain_add_nomap(NULL, &beatic_pic_host_ops, NULL);
+ beatic_host = irq_domain_add_nomap(NULL, 0, &beatic_pic_host_ops, NULL);
BUG_ON(beatic_host == NULL);
irq_set_default_host(beatic_host);
}
{
int rc = -ENOMEM;
- psurge_host = irq_domain_add_nomap(NULL, &psurge_host_ops, NULL);
+ psurge_host = irq_domain_add_nomap(NULL, 0, &psurge_host_ops, NULL);
if (psurge_host)
psurge_secondary_virq = irq_create_direct_mapping(psurge_host);
unsigned cpu;
struct irq_domain *host;
- host = irq_domain_add_nomap(NULL, &ps3_host_ops, NULL);
+ host = irq_domain_add_nomap(NULL, PS3_PLUG_MAX + 1, &ps3_host_ops, NULL);
irq_set_default_host(host);
- irq_set_virq_count(PS3_PLUG_MAX + 1);
for_each_possible_cpu(cpu) {
struct ps3_private *pd = &per_cpu(ps3_private, cpu);
void __devinit pcibios_fixup_bus(struct pci_bus *pbus)
{
- struct leon_pci_info *info = pbus->sysdata;
struct pci_dev *dev;
int i, has_io, has_mem;
u16 cmd;
return pci_enable_resources(dev, mask);
}
-struct device_node *pci_device_to_OF_node(struct pci_dev *pdev)
-{
- /*
- * Currently the OpenBoot nodes are not connected with the PCI device,
- * this is because the LEON PROM does not create PCI nodes. Eventually
- * this will change and the same approach as pcic.c can be used to
- * match PROM nodes with pci devices.
- */
- return NULL;
-}
-EXPORT_SYMBOL(pci_device_to_OF_node);
-
void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
{
#ifdef CONFIG_PCI_DEBUG
unsigned long g2;
int from_user = !(regs->psr & PSR_PS);
int fault, code;
+ unsigned int flags = (FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
+ (write ? FAULT_FLAG_WRITE : 0));
if(text_fault)
address = regs->pc;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
+retry:
down_read(&mm->mmap_sem);
/*
* make sure we exit gracefully rather than endlessly redo
* the fault.
*/
- fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
+ fault = handle_mm_fault(mm, vma, address, flags);
+
+ if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+ return;
+
if (unlikely(fault & VM_FAULT_ERROR)) {
if (fault & VM_FAULT_OOM)
goto out_of_memory;
goto do_sigbus;
BUG();
}
- if (fault & VM_FAULT_MAJOR) {
- current->maj_flt++;
- perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, address);
- } else {
- current->min_flt++;
- perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, address);
+
+ if (flags & FAULT_FLAG_ALLOW_RETRY) {
+ if (fault & VM_FAULT_MAJOR) {
+ current->maj_flt++;
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ,
+ 1, regs, address);
+ } else {
+ current->min_flt++;
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN,
+ 1, regs, address);
+ }
+ if (fault & VM_FAULT_RETRY) {
+ flags &= ~FAULT_FLAG_ALLOW_RETRY;
+
+ /* No need to up_read(&mm->mmap_sem) as we would
+ * have already released it in __lock_page_or_retry
+ * in mm/filemap.c.
+ */
+
+ goto retry;
+ }
}
+
up_read(&mm->mmap_sem);
return;
unsigned int insn = 0;
int si_code, fault_code, fault;
unsigned long address, mm_rss;
+ unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
fault_code = get_thread_fault_code();
insn = get_fault_insn(regs, insn);
goto handle_kernel_fault;
}
+
+retry:
down_read(&mm->mmap_sem);
}
goto bad_area;
}
- fault = handle_mm_fault(mm, vma, address, (fault_code & FAULT_CODE_WRITE) ? FAULT_FLAG_WRITE : 0);
+ flags |= ((fault_code & FAULT_CODE_WRITE) ? FAULT_FLAG_WRITE : 0);
+ fault = handle_mm_fault(mm, vma, address, flags);
+
+ if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+ return;
+
if (unlikely(fault & VM_FAULT_ERROR)) {
if (fault & VM_FAULT_OOM)
goto out_of_memory;
goto do_sigbus;
BUG();
}
- if (fault & VM_FAULT_MAJOR) {
- current->maj_flt++;
- perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, address);
- } else {
- current->min_flt++;
- perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, address);
+
+ if (flags & FAULT_FLAG_ALLOW_RETRY) {
+ if (fault & VM_FAULT_MAJOR) {
+ current->maj_flt++;
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ,
+ 1, regs, address);
+ } else {
+ current->min_flt++;
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN,
+ 1, regs, address);
+ }
+ if (fault & VM_FAULT_RETRY) {
+ flags &= ~FAULT_FLAG_ALLOW_RETRY;
+
+ /* No need to up_read(&mm->mmap_sem) as we would
+ * have already released it in __lock_page_or_retry
+ * in mm/filemap.c.
+ */
+
+ goto retry;
+ }
}
up_read(&mm->mmap_sem);
},
{}
};
-#endif
static struct ctl_path tile_path[] = {
{ .procname = "tile" },
static int __init proc_sys_tile_init(void)
{
-#ifndef __tilegx__ /* FIXME: GX: no support for unaligned access yet */
register_sysctl_paths(tile_path, unaligned_table);
-#endif
return 0;
}
arch_initcall(proc_sys_tile_init);
+#endif
/* This must be done before setting cpu_online_mask */
wmb();
+ notify_cpu_starting(smp_processor_id());
+
/*
* We need to hold call_lock, so there is no inconsistency
* between the time smp_call_function() determines number of
#include <asm/types.h>
-#if defined(__KERNEL__)
-
-# include <asm/byteorder.h>
-
-# if defined(__BIG_ENDIAN)
-# define ntohll(x) (x)
-# define htonll(x) (x)
-# elif defined(__LITTLE_ENDIAN)
-# define ntohll(x) be64_to_cpu(x)
-# define htonll(x) cpu_to_be64(x)
-# else
-# error "Could not determine byte order"
-# endif
-
-#else
-/* For the definition of ntohl, htonl and __BYTE_ORDER */
-#include <endian.h>
-#include <netinet/in.h>
-#if defined(__BYTE_ORDER)
-
-# if __BYTE_ORDER == __BIG_ENDIAN
-# define ntohll(x) (x)
-# define htonll(x) (x)
-# elif __BYTE_ORDER == __LITTLE_ENDIAN
-# define ntohll(x) bswap_64(x)
-# define htonll(x) bswap_64(x)
-# else
-# error "Could not determine byte order: __BYTE_ORDER uncorrectly defined"
-# endif
-
-#else /* ! defined(__BYTE_ORDER) */
-# error "Could not determine byte order: __BYTE_ORDER not defined"
-#endif
-#endif /* ! defined(__KERNEL__) */
-
extern int init_cow_file(int fd, char *cow_file, char *backing_file,
int sectorsize, int alignment, int *bitmap_offset_out,
unsigned long *bitmap_len_out, int *data_offset_out);
* that.
*/
#include <unistd.h>
-#include <byteswap.h>
#include <errno.h>
#include <string.h>
#include <arpa/inet.h>
-#include <asm/types.h>
+#include <endian.h>
#include "cow.h"
#include "cow_sys.h"
"header\n");
goto out;
}
- header->magic = htonl(COW_MAGIC);
- header->version = htonl(COW_VERSION);
+ header->magic = htobe32(COW_MAGIC);
+ header->version = htobe32(COW_VERSION);
err = -EINVAL;
if (strlen(backing_file) > sizeof(header->backing_file) - 1) {
goto out_free;
}
- header->mtime = htonl(modtime);
- header->size = htonll(*size);
- header->sectorsize = htonl(sectorsize);
- header->alignment = htonl(alignment);
+ header->mtime = htobe32(modtime);
+ header->size = htobe64(*size);
+ header->sectorsize = htobe32(sectorsize);
+ header->alignment = htobe32(alignment);
header->cow_format = COW_BITMAP;
err = cow_write_file(fd, header, sizeof(*header));
magic = header->v1.magic;
if (magic == COW_MAGIC)
version = header->v1.version;
- else if (magic == ntohl(COW_MAGIC))
- version = ntohl(header->v1.version);
+ else if (magic == be32toh(COW_MAGIC))
+ version = be32toh(header->v1.version);
/* No error printed because the non-COW case comes through here */
else goto out;
"header\n");
goto out;
}
- *mtime_out = ntohl(header->v2.mtime);
- *size_out = ntohll(header->v2.size);
- *sectorsize_out = ntohl(header->v2.sectorsize);
+ *mtime_out = be32toh(header->v2.mtime);
+ *size_out = be64toh(header->v2.size);
+ *sectorsize_out = be32toh(header->v2.sectorsize);
*bitmap_offset_out = sizeof(header->v2);
*align_out = *sectorsize_out;
file = header->v2.backing_file;
"header\n");
goto out;
}
- *mtime_out = ntohl(header->v3.mtime);
- *size_out = ntohll(header->v3.size);
- *sectorsize_out = ntohl(header->v3.sectorsize);
- *align_out = ntohl(header->v3.alignment);
+ *mtime_out = be32toh(header->v3.mtime);
+ *size_out = be64toh(header->v3.size);
+ *sectorsize_out = be32toh(header->v3.sectorsize);
+ *align_out = be32toh(header->v3.alignment);
if (*align_out == 0) {
cow_printf("read_cow_header - invalid COW header, "
"align == 0\n");
* this was used until Dec2005 - 64bits are needed to represent
* 2038+. I.e. we can safely do this truncating cast.
*
- * Additionally, we must use ntohl() instead of ntohll(), since
+ * Additionally, we must use be32toh() instead of be64toh(), since
* the program used to use the former (tested - I got mtime
* mismatch "0 vs whatever").
*
* Ever heard about bug-to-bug-compatibility ? ;-) */
- *mtime_out = (time32_t) ntohl(header->v3_b.mtime);
+ *mtime_out = (time32_t) be32toh(header->v3_b.mtime);
- *size_out = ntohll(header->v3_b.size);
- *sectorsize_out = ntohl(header->v3_b.sectorsize);
- *align_out = ntohl(header->v3_b.alignment);
+ *size_out = be64toh(header->v3_b.size);
+ *sectorsize_out = be32toh(header->v3_b.sectorsize);
+ *align_out = be32toh(header->v3_b.alignment);
if (*align_out == 0) {
cow_printf("read_cow_header - invalid COW header, "
"align == 0\n");
#include <linux/workqueue.h>
#include <linux/mutex.h>
#include <asm/uaccess.h>
+#include <asm/switch_to.h>
#include "init.h"
#include "irq_kern.h"
generic-y += bug.h cputime.h device.h emergency-restart.h futex.h hardirq.h
generic-y += hw_irq.h irq_regs.h kdebug.h percpu.h sections.h topology.h xor.h
-generic-y += ftrace.h pci.h io.h param.h delay.h mutex.h current.h
+generic-y += ftrace.h pci.h io.h param.h delay.h mutex.h current.h exec.h
+generic-y += switch_to.h
# Licensed under the GPL
#
-CPPFLAGS_vmlinux.lds := -DSTART=$(LDS_START) \
- -DELF_ARCH=$(LDS_ELF_ARCH) \
- -DELF_FORMAT=$(LDS_ELF_FORMAT)
+CPPFLAGS_vmlinux.lds := -DSTART=$(LDS_START) \
+ -DELF_ARCH=$(LDS_ELF_ARCH) \
+ -DELF_FORMAT=$(LDS_ELF_FORMAT) \
+ $(LDS_EXTRA)
extra-y := vmlinux.lds
clean-files :=
extern void arch_switch_to(struct task_struct *to);
-void *_switch_to(void *prev, void *next, void *last)
+void *__switch_to(struct task_struct *from, struct task_struct *to)
{
- struct task_struct *from = prev;
- struct task_struct *to = next;
-
to->thread.prev_sched = from;
set_current(to);
} while (current->thread.saved_task);
return current->thread.prev_sched;
-
}
void interrupt_end(void)
void uml_setup_stubs(struct mm_struct *mm)
{
- struct page **pages;
int err, ret;
if (!skas_needs_stub)
export LDFLAGS
+LDS_EXTRA := -Ui386
+export LDS_EXTRA
+
# First of all, tune CFLAGS for the specific CPU. This actually sets cflags-y.
include $(srctree)/arch/x86/Makefile_32.cpu
switch (sizeof(*(ptr))) { \
case __X86_CASE_B: \
asm volatile (lock #op "b %b0, %1\n" \
- : "+r" (__ret), "+m" (*(ptr)) \
+ : "+q" (__ret), "+m" (*(ptr)) \
: : "memory", "cc"); \
break; \
case __X86_CASE_W: \
switch (sizeof(*(ptr))) { \
case __X86_CASE_B: \
asm volatile (lock "addb %b1, %0\n" \
- : "+m" (*(ptr)) : "ri" (inc) \
+ : "+m" (*(ptr)) : "qi" (inc) \
: "memory", "cc"); \
break; \
case __X86_CASE_W: \
extern unsigned long
copy_from_user_nmi(void *to, const void __user *from, unsigned long n);
+extern __must_check long
+strncpy_from_user(char *dst, const char __user *src, long count);
/*
* movsl can be slow when source and dest are not both 8-byte aligned
return n;
}
-long __must_check strncpy_from_user(char *dst, const char __user *src,
- long count);
-long __must_check __strncpy_from_user(char *dst,
- const char __user *src, long count);
-
/**
* strlen_user: - Get the size of a string in user space.
* @str: The string to measure.
}
}
-__must_check long
-strncpy_from_user(char *dst, const char __user *src, long count);
-__must_check long
-__strncpy_from_user(char *dst, const char __user *src, long count);
__must_check long strnlen_user(const char __user *str, long n);
__must_check long __strnlen_user(const char __user *str, long n);
__must_check long strlen_user(const char __user *str);
current_thread_info()->sig_on_uaccess_error = 1;
/*
- * 0 is a valid user pointer (in the access_ok sense) on 32-bit and
+ * NULL is a valid user pointer (in the access_ok sense) on 32-bit and
* 64-bit, so we don't need to special-case it here. For all the
- * vsyscalls, 0 means "don't write anything" not "write it at
+ * vsyscalls, NULL means "don't write anything" not "write it at
* address 0".
*/
ret = -EFAULT;
ret = sys_getcpu((unsigned __user *)regs->di,
(unsigned __user *)regs->si,
- 0);
+ NULL);
break;
}
#include <linux/highmem.h>
#include <linux/module.h>
+#include <asm/word-at-a-time.h>
+
/*
* best effort, GUP based copy_from_user() that is NMI-safe
*/
return len;
}
EXPORT_SYMBOL_GPL(copy_from_user_nmi);
+
+static inline unsigned long count_bytes(unsigned long mask)
+{
+ mask = (mask - 1) & ~mask;
+ mask >>= 7;
+ return count_masked_bytes(mask);
+}
+
+/*
+ * Do a strncpy, return length of string without final '\0'.
+ * 'count' is the user-supplied count (return 'count' if we
+ * hit it), 'max' is the address space maximum (and we return
+ * -EFAULT if we hit it).
+ */
+static inline long do_strncpy_from_user(char *dst, const char __user *src, long count, long max)
+{
+ long res = 0;
+
+ /*
+ * Truncate 'max' to the user-specified limit, so that
+ * we only have one limit we need to check in the loop
+ */
+ if (max > count)
+ max = count;
+
+ while (max >= sizeof(unsigned long)) {
+ unsigned long c;
+
+ /* Fall back to byte-at-a-time if we get a page fault */
+ if (unlikely(__get_user(c,(unsigned long __user *)(src+res))))
+ break;
+ /* This can write a few bytes past the NUL character, but that's ok */
+ *(unsigned long *)(dst+res) = c;
+ c = has_zero(c);
+ if (c)
+ return res + count_bytes(c);
+ res += sizeof(unsigned long);
+ max -= sizeof(unsigned long);
+ }
+
+ while (max) {
+ char c;
+
+ if (unlikely(__get_user(c,src+res)))
+ return -EFAULT;
+ dst[res] = c;
+ if (!c)
+ return res;
+ res++;
+ max--;
+ }
+
+ /*
+ * Uhhuh. We hit 'max'. But was that the user-specified maximum
+ * too? If so, that's ok - we got as much as the user asked for.
+ */
+ if (res >= count)
+ return count;
+
+ /*
+ * Nope: we hit the address space limit, and we still had more
+ * characters the caller would have wanted. That's an EFAULT.
+ */
+ return -EFAULT;
+}
+
+/**
+ * strncpy_from_user: - Copy a NUL terminated string from userspace.
+ * @dst: Destination address, in kernel space. This buffer must be at
+ * least @count bytes long.
+ * @src: Source address, in user space.
+ * @count: Maximum number of bytes to copy, including the trailing NUL.
+ *
+ * Copies a NUL-terminated string from userspace to kernel space.
+ *
+ * On success, returns the length of the string (not including the trailing
+ * NUL).
+ *
+ * If access to userspace fails, returns -EFAULT (some data may have been
+ * copied).
+ *
+ * If @count is smaller than the length of the string, copies @count bytes
+ * and returns @count.
+ */
+long
+strncpy_from_user(char *dst, const char __user *src, long count)
+{
+ unsigned long max_addr, src_addr;
+
+ if (unlikely(count <= 0))
+ return 0;
+
+ max_addr = current_thread_info()->addr_limit.seg;
+ src_addr = (unsigned long)src;
+ if (likely(src_addr < max_addr)) {
+ unsigned long max = max_addr - src_addr;
+ return do_strncpy_from_user(dst, src, count, max);
+ }
+ return -EFAULT;
+}
+EXPORT_SYMBOL(strncpy_from_user);
#define movsl_is_ok(a1, a2, n) \
__movsl_is_ok((unsigned long)(a1), (unsigned long)(a2), (n))
-/*
- * Copy a null terminated string from userspace.
- */
-
-#define __do_strncpy_from_user(dst, src, count, res) \
-do { \
- int __d0, __d1, __d2; \
- might_fault(); \
- __asm__ __volatile__( \
- " testl %1,%1\n" \
- " jz 2f\n" \
- "0: lodsb\n" \
- " stosb\n" \
- " testb %%al,%%al\n" \
- " jz 1f\n" \
- " decl %1\n" \
- " jnz 0b\n" \
- "1: subl %1,%0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: movl %5,%0\n" \
- " jmp 2b\n" \
- ".previous\n" \
- _ASM_EXTABLE(0b,3b) \
- : "=&d"(res), "=&c"(count), "=&a" (__d0), "=&S" (__d1), \
- "=&D" (__d2) \
- : "i"(-EFAULT), "0"(count), "1"(count), "3"(src), "4"(dst) \
- : "memory"); \
-} while (0)
-
-/**
- * __strncpy_from_user: - Copy a NUL terminated string from userspace, with less checking.
- * @dst: Destination address, in kernel space. This buffer must be at
- * least @count bytes long.
- * @src: Source address, in user space.
- * @count: Maximum number of bytes to copy, including the trailing NUL.
- *
- * Copies a NUL-terminated string from userspace to kernel space.
- * Caller must check the specified block with access_ok() before calling
- * this function.
- *
- * On success, returns the length of the string (not including the trailing
- * NUL).
- *
- * If access to userspace fails, returns -EFAULT (some data may have been
- * copied).
- *
- * If @count is smaller than the length of the string, copies @count bytes
- * and returns @count.
- */
-long
-__strncpy_from_user(char *dst, const char __user *src, long count)
-{
- long res;
- __do_strncpy_from_user(dst, src, count, res);
- return res;
-}
-EXPORT_SYMBOL(__strncpy_from_user);
-
-/**
- * strncpy_from_user: - Copy a NUL terminated string from userspace.
- * @dst: Destination address, in kernel space. This buffer must be at
- * least @count bytes long.
- * @src: Source address, in user space.
- * @count: Maximum number of bytes to copy, including the trailing NUL.
- *
- * Copies a NUL-terminated string from userspace to kernel space.
- *
- * On success, returns the length of the string (not including the trailing
- * NUL).
- *
- * If access to userspace fails, returns -EFAULT (some data may have been
- * copied).
- *
- * If @count is smaller than the length of the string, copies @count bytes
- * and returns @count.
- */
-long
-strncpy_from_user(char *dst, const char __user *src, long count)
-{
- long res = -EFAULT;
- if (access_ok(VERIFY_READ, src, 1))
- __do_strncpy_from_user(dst, src, count, res);
- return res;
-}
-EXPORT_SYMBOL(strncpy_from_user);
-
/*
* Zero Userspace
*/
#include <linux/module.h>
#include <asm/uaccess.h>
-/*
- * Copy a null terminated string from userspace.
- */
-
-#define __do_strncpy_from_user(dst,src,count,res) \
-do { \
- long __d0, __d1, __d2; \
- might_fault(); \
- __asm__ __volatile__( \
- " testq %1,%1\n" \
- " jz 2f\n" \
- "0: lodsb\n" \
- " stosb\n" \
- " testb %%al,%%al\n" \
- " jz 1f\n" \
- " decq %1\n" \
- " jnz 0b\n" \
- "1: subq %1,%0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: movq %5,%0\n" \
- " jmp 2b\n" \
- ".previous\n" \
- _ASM_EXTABLE(0b,3b) \
- : "=&r"(res), "=&c"(count), "=&a" (__d0), "=&S" (__d1), \
- "=&D" (__d2) \
- : "i"(-EFAULT), "0"(count), "1"(count), "3"(src), "4"(dst) \
- : "memory"); \
-} while (0)
-
-long
-__strncpy_from_user(char *dst, const char __user *src, long count)
-{
- long res;
- __do_strncpy_from_user(dst, src, count, res);
- return res;
-}
-EXPORT_SYMBOL(__strncpy_from_user);
-
-long
-strncpy_from_user(char *dst, const char __user *src, long count)
-{
- long res = -EFAULT;
- if (access_ok(VERIFY_READ, src, 1))
- return __strncpy_from_user(dst, src, count);
- return res;
-}
-EXPORT_SYMBOL(strncpy_from_user);
-
/*
* Zero Userspace
*/
--- /dev/null
+#ifndef _ASM_UM_BARRIER_H_
+#define _ASM_UM_BARRIER_H_
+
+#include <asm/asm.h>
+#include <asm/segment.h>
+#include <asm/cpufeature.h>
+#include <asm/cmpxchg.h>
+#include <asm/nops.h>
+
+#include <linux/kernel.h>
+#include <linux/irqflags.h>
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ */
+#ifdef CONFIG_X86_32
+
+#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
+#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
+#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
+
+#else /* CONFIG_X86_32 */
+
+#define mb() asm volatile("mfence" : : : "memory")
+#define rmb() asm volatile("lfence" : : : "memory")
+#define wmb() asm volatile("sfence" : : : "memory")
+
+#endif /* CONFIG_X86_32 */
+
+#define read_barrier_depends() do { } while (0)
+
+#ifdef CONFIG_SMP
+
+#define smp_mb() mb()
+#ifdef CONFIG_X86_PPRO_FENCE
+#define smp_rmb() rmb()
+#else /* CONFIG_X86_PPRO_FENCE */
+#define smp_rmb() barrier()
+#endif /* CONFIG_X86_PPRO_FENCE */
+
+#ifdef CONFIG_X86_OOSTORE
+#define smp_wmb() wmb()
+#else /* CONFIG_X86_OOSTORE */
+#define smp_wmb() barrier()
+#endif /* CONFIG_X86_OOSTORE */
+
+#define smp_read_barrier_depends() read_barrier_depends()
+#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
+
+#else /* CONFIG_SMP */
+
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
+#define smp_read_barrier_depends() do { } while (0)
+#define set_mb(var, value) do { var = value; barrier(); } while (0)
+
+#endif /* CONFIG_SMP */
+
+/*
+ * Stop RDTSC speculation. This is needed when you need to use RDTSC
+ * (or get_cycles or vread that possibly accesses the TSC) in a defined
+ * code region.
+ *
+ * (Could use an alternative three way for this if there was one.)
+ */
+static inline void rdtsc_barrier(void)
+{
+ alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
+ alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
+}
+
+#endif
+++ /dev/null
-#ifndef _ASM_X86_SYSTEM_H_
-#define _ASM_X86_SYSTEM_H_
-
-#include <asm/asm.h>
-#include <asm/segment.h>
-#include <asm/cpufeature.h>
-#include <asm/cmpxchg.h>
-#include <asm/nops.h>
-
-#include <linux/kernel.h>
-#include <linux/irqflags.h>
-
-/* entries in ARCH_DLINFO: */
-#ifdef CONFIG_IA32_EMULATION
-# define AT_VECTOR_SIZE_ARCH 2
-#else
-# define AT_VECTOR_SIZE_ARCH 1
-#endif
-
-extern unsigned long arch_align_stack(unsigned long sp);
-
-void default_idle(void);
-
-/*
- * Force strict CPU ordering.
- * And yes, this is required on UP too when we're talking
- * to devices.
- */
-#ifdef CONFIG_X86_32
-/*
- * Some non-Intel clones support out of order store. wmb() ceases to be a
- * nop for these.
- */
-#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
-#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
-#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
-#else
-#define mb() asm volatile("mfence":::"memory")
-#define rmb() asm volatile("lfence":::"memory")
-#define wmb() asm volatile("sfence" ::: "memory")
-#endif
-
-/**
- * read_barrier_depends - Flush all pending reads that subsequents reads
- * depend on.
- *
- * No data-dependent reads from memory-like regions are ever reordered
- * over this barrier. All reads preceding this primitive are guaranteed
- * to access memory (but not necessarily other CPUs' caches) before any
- * reads following this primitive that depend on the data return by
- * any of the preceding reads. This primitive is much lighter weight than
- * rmb() on most CPUs, and is never heavier weight than is
- * rmb().
- *
- * These ordering constraints are respected by both the local CPU
- * and the compiler.
- *
- * Ordering is not guaranteed by anything other than these primitives,
- * not even by data dependencies. See the documentation for
- * memory_barrier() for examples and URLs to more information.
- *
- * For example, the following code would force ordering (the initial
- * value of "a" is zero, "b" is one, and "p" is "&a"):
- *
- * <programlisting>
- * CPU 0 CPU 1
- *
- * b = 2;
- * memory_barrier();
- * p = &b; q = p;
- * read_barrier_depends();
- * d = *q;
- * </programlisting>
- *
- * because the read of "*q" depends on the read of "p" and these
- * two reads are separated by a read_barrier_depends(). However,
- * the following code, with the same initial values for "a" and "b":
- *
- * <programlisting>
- * CPU 0 CPU 1
- *
- * a = 2;
- * memory_barrier();
- * b = 3; y = b;
- * read_barrier_depends();
- * x = a;
- * </programlisting>
- *
- * does not enforce ordering, since there is no data dependency between
- * the read of "a" and the read of "b". Therefore, on some CPUs, such
- * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb()
- * in cases like this where there are no data dependencies.
- **/
-
-#define read_barrier_depends() do { } while (0)
-
-#ifdef CONFIG_SMP
-#define smp_mb() mb()
-#ifdef CONFIG_X86_PPRO_FENCE
-# define smp_rmb() rmb()
-#else
-# define smp_rmb() barrier()
-#endif
-#ifdef CONFIG_X86_OOSTORE
-# define smp_wmb() wmb()
-#else
-# define smp_wmb() barrier()
-#endif
-#define smp_read_barrier_depends() read_barrier_depends()
-#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
-#else
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() do { } while (0)
-#define set_mb(var, value) do { var = value; barrier(); } while (0)
-#endif
-
-/*
- * Stop RDTSC speculation. This is needed when you need to use RDTSC
- * (or get_cycles or vread that possibly accesses the TSC) in a defined
- * code region.
- *
- * (Could use an alternative three way for this if there was one.)
- */
-static inline void rdtsc_barrier(void)
-{
- alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
- alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
-}
-
-extern void *_switch_to(void *prev, void *next, void *last);
-#define switch_to(prev, next, last) prev = _switch_to(prev, next, last)
-
-#endif
config CRYPTO_BLOWFISH_X86_64
tristate "Blowfish cipher algorithm (x86_64)"
- depends on (X86 || UML_X86) && 64BIT
+ depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_BLOWFISH_COMMON
help
config CRYPTO_CAMELLIA_X86_64
tristate "Camellia cipher algorithm (x86_64)"
- depends on (X86 || UML_X86) && 64BIT
+ depends on X86 && 64BIT
depends on CRYPTO
select CRYPTO_ALGAPI
select CRYPTO_LRW
config CRYPTO_TWOFISH_X86_64_3WAY
tristate "Twofish cipher algorithm (x86_64, 3-way parallel)"
- depends on (X86 || UML_X86) && 64BIT
+ depends on X86 && 64BIT
select CRYPTO_ALGAPI
select CRYPTO_TWOFISH_COMMON
select CRYPTO_TWOFISH_X86_64
#include <linux/sys_soc.h>
#include <linux/err.h>
-static DEFINE_IDR(soc_ida);
+static DEFINE_IDA(soc_ida);
static DEFINE_SPINLOCK(soc_lock);
static ssize_t soc_info_get(struct device *dev,
static int __init soc_bus_register(void)
{
- spin_lock_init(&soc_lock);
-
return bus_register(&soc_bus_type);
}
core_initcall(soc_bus_register);
config BCMA_DRIVER_PCI_HOSTMODE
bool "Driver for PCI core working in hostmode"
- depends on BCMA && MIPS
+ depends on BCMA && MIPS && BCMA_HOST_PCI
help
PCI core hostmode operation (external PCI bus).
*/
#include "bcma_private.h"
+#include <linux/pci.h>
#include <linux/export.h>
#include <linux/bcma/bcma.h>
#include <asm/paccess.h>
/* Atheros AR3012 with sflash firmware*/
{ USB_DEVICE(0x0CF3, 0x3004) },
+ { USB_DEVICE(0x0CF3, 0x311D) },
{ USB_DEVICE(0x13d3, 0x3375) },
+ { USB_DEVICE(0x04CA, 0x3005) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
/* Atheros AR3012 with sflash firmware*/
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ } /* Terminating entry */
};
{ USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
/* Broadcom SoftSailing reporting vendor specific */
- { USB_DEVICE(0x05ac, 0x21e1) },
+ { USB_DEVICE(0x0a5c, 0x21e1) },
/* Apple MacBookPro 7,1 */
{ USB_DEVICE(0x05ac, 0x8213) },
/* Broadcom BCM20702A0 */
{ USB_DEVICE(0x0a5c, 0x21e3) },
{ USB_DEVICE(0x0a5c, 0x21e6) },
+ { USB_DEVICE(0x0a5c, 0x21e8) },
{ USB_DEVICE(0x0a5c, 0x21f3) },
{ USB_DEVICE(0x413c, 0x8197) },
/* Atheros 3012 with sflash firmware */
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
hci_uart_close(hdev);
if (test_and_clear_bit(HCI_UART_PROTO_SET, &hu->flags)) {
- hu->proto->close(hu);
if (hdev) {
hci_unregister_dev(hdev);
hci_free_dev(hdev);
}
+ hu->proto->close(hu);
}
kfree(hu);
hpetp->hp_which, hdp->hd_phys_address,
hpetp->hp_ntimer > 1 ? "s" : "");
for (i = 0; i < hpetp->hp_ntimer; i++)
- printk("%s %d", i > 0 ? "," : "", hdp->hd_irq[i]);
- printk("\n");
+ printk(KERN_CONT "%s %d", i > 0 ? "," : "", hdp->hd_irq[i]);
+ printk(KERN_CONT "\n");
temp = hpetp->hp_tick_freq;
remainder = do_div(temp, 1000000);
uuid = table->data;
if (!uuid) {
uuid = tmp_uuid;
- uuid[8] = 0;
- }
- if (uuid[8] == 0)
generate_random_uuid(uuid);
+ } else {
+ static DEFINE_SPINLOCK(bootid_spinlock);
+
+ spin_lock(&bootid_spinlock);
+ if (!uuid[8])
+ generate_random_uuid(uuid);
+ spin_unlock(&bootid_spinlock);
+ }
sprintf(buf, "%pU", uuid);
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/delay.h>
-#include <linux/async.h>
#include <asm/io.h>
/*
/* Number of reads we try to get two different values */
#define ACPI_PM_READ_CHECKS 10000
-static void __init acpi_pm_clocksource_async(void *unused, async_cookie_t cookie)
+static int __init init_acpi_pm_clocksource(void)
{
cycle_t value1, value2;
unsigned int i, j = 0;
+ if (!pmtmr_ioport)
+ return -ENODEV;
/* "verify" this timing source: */
for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) {
- usleep_range(100 * j, 100 * j + 100);
+ udelay(100 * j);
value1 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
for (i = 0; i < ACPI_PM_READ_CHECKS; i++) {
value2 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
" 0x%#llx, 0x%#llx - aborting.\n",
value1, value2);
pmtmr_ioport = 0;
- return;
+ return -EINVAL;
}
if (i == ACPI_PM_READ_CHECKS) {
printk(KERN_INFO "PM-Timer failed consistency check "
" (0x%#llx) - aborting.\n", value1);
pmtmr_ioport = 0;
- return;
+ return -ENODEV;
}
}
if (verify_pmtmr_rate() != 0){
pmtmr_ioport = 0;
- return;
+ return -ENODEV;
}
- clocksource_register_hz(&clocksource_acpi_pm,
+ return clocksource_register_hz(&clocksource_acpi_pm,
PMTMR_TICKS_PER_SEC);
}
-static int __init init_acpi_pm_clocksource(void)
-{
- if (!pmtmr_ioport)
- return -ENODEV;
-
- async_schedule(acpi_pm_clocksource_async, NULL);
- return 0;
-}
-
/* We use fs_initcall because we want the PCI fixups to have run
* but we still need to load before device_initcall
*/
}
EXPORT_SYMBOL(dma_find_channel);
+/*
+ * net_dma_find_channel - find a channel for net_dma
+ * net_dma has alignment requirements
+ */
+struct dma_chan *net_dma_find_channel(void)
+{
+ struct dma_chan *chan = dma_find_channel(DMA_MEMCPY);
+ if (chan && !is_dma_copy_aligned(chan->device, 1, 1, 1))
+ return NULL;
+
+ return chan;
+}
+EXPORT_SYMBOL(net_dma_find_channel);
+
/**
* dma_issue_pending_all - flush all pending operations across all channels
*/
PCI_DMA_TODEVICE, flags, 0);
}
-unsigned long ioat_get_current_completion(struct ioat_chan_common *chan)
+dma_addr_t ioat_get_current_completion(struct ioat_chan_common *chan)
{
- unsigned long phys_complete;
+ dma_addr_t phys_complete;
u64 completion;
completion = *chan->completion;
}
bool ioat_cleanup_preamble(struct ioat_chan_common *chan,
- unsigned long *phys_complete)
+ dma_addr_t *phys_complete)
{
*phys_complete = ioat_get_current_completion(chan);
if (*phys_complete == chan->last_completion)
return true;
}
-static void __cleanup(struct ioat_dma_chan *ioat, unsigned long phys_complete)
+static void __cleanup(struct ioat_dma_chan *ioat, dma_addr_t phys_complete)
{
struct ioat_chan_common *chan = &ioat->base;
struct list_head *_desc, *n;
struct dma_async_tx_descriptor *tx;
- dev_dbg(to_dev(chan), "%s: phys_complete: %lx\n",
- __func__, phys_complete);
+ dev_dbg(to_dev(chan), "%s: phys_complete: %llx\n",
+ __func__, (unsigned long long) phys_complete);
list_for_each_safe(_desc, n, &ioat->used_desc) {
struct ioat_desc_sw *desc;
static void ioat1_cleanup(struct ioat_dma_chan *ioat)
{
struct ioat_chan_common *chan = &ioat->base;
- unsigned long phys_complete;
+ dma_addr_t phys_complete;
prefetch(chan->completion);
mod_timer(&chan->timer, jiffies + COMPLETION_TIMEOUT);
spin_unlock_bh(&ioat->desc_lock);
} else if (test_bit(IOAT_COMPLETION_PENDING, &chan->state)) {
- unsigned long phys_complete;
+ dma_addr_t phys_complete;
spin_lock_bh(&ioat->desc_lock);
/* if we haven't made progress and we have already
struct ioat_chan_common {
struct dma_chan common;
void __iomem *reg_base;
- unsigned long last_completion;
+ dma_addr_t last_completion;
spinlock_t cleanup_lock;
unsigned long state;
#define IOAT_COMPLETION_PENDING 0
void __devexit ioat_dma_remove(struct ioatdma_device *device);
struct dca_provider * __devinit ioat_dca_init(struct pci_dev *pdev,
void __iomem *iobase);
-unsigned long ioat_get_current_completion(struct ioat_chan_common *chan);
+dma_addr_t ioat_get_current_completion(struct ioat_chan_common *chan);
void ioat_init_channel(struct ioatdma_device *device,
struct ioat_chan_common *chan, int idx);
enum dma_status ioat_dma_tx_status(struct dma_chan *c, dma_cookie_t cookie,
void ioat_dma_unmap(struct ioat_chan_common *chan, enum dma_ctrl_flags flags,
size_t len, struct ioat_dma_descriptor *hw);
bool ioat_cleanup_preamble(struct ioat_chan_common *chan,
- unsigned long *phys_complete);
+ dma_addr_t *phys_complete);
void ioat_kobject_add(struct ioatdma_device *device, struct kobj_type *type);
void ioat_kobject_del(struct ioatdma_device *device);
extern const struct sysfs_ops ioat_sysfs_ops;
spin_unlock_bh(&ioat->prep_lock);
}
-static void __cleanup(struct ioat2_dma_chan *ioat, unsigned long phys_complete)
+static void __cleanup(struct ioat2_dma_chan *ioat, dma_addr_t phys_complete)
{
struct ioat_chan_common *chan = &ioat->base;
struct dma_async_tx_descriptor *tx;
static void ioat2_cleanup(struct ioat2_dma_chan *ioat)
{
struct ioat_chan_common *chan = &ioat->base;
- unsigned long phys_complete;
+ dma_addr_t phys_complete;
spin_lock_bh(&chan->cleanup_lock);
if (ioat_cleanup_preamble(chan, &phys_complete))
static void ioat2_restart_channel(struct ioat2_dma_chan *ioat)
{
struct ioat_chan_common *chan = &ioat->base;
- unsigned long phys_complete;
+ dma_addr_t phys_complete;
ioat2_quiesce(chan, 0);
if (ioat_cleanup_preamble(chan, &phys_complete))
struct ioat_chan_common *chan = &ioat->base;
if (test_bit(IOAT_COMPLETION_PENDING, &chan->state)) {
- unsigned long phys_complete;
+ dma_addr_t phys_complete;
u64 status;
status = ioat_chansts(chan);
*/
struct ioat_chan_common *chan = &ioat->base;
struct dma_chan *c = &chan->common;
- const u16 curr_size = ioat2_ring_size(ioat);
+ const u32 curr_size = ioat2_ring_size(ioat);
const u16 active = ioat2_ring_active(ioat);
- const u16 new_size = 1 << order;
+ const u32 new_size = 1 << order;
struct ioat_ring_ent **ring;
u16 i;
return container_of(chan, struct ioat2_dma_chan, base);
}
-static inline u16 ioat2_ring_size(struct ioat2_dma_chan *ioat)
+static inline u32 ioat2_ring_size(struct ioat2_dma_chan *ioat)
{
return 1 << ioat->alloc_order;
}
return CIRC_CNT(ioat->head, ioat->issued, ioat2_ring_size(ioat));
}
-static inline u16 ioat2_ring_space(struct ioat2_dma_chan *ioat)
+static inline u32 ioat2_ring_space(struct ioat2_dma_chan *ioat)
{
return ioat2_ring_size(ioat) - ioat2_ring_active(ioat);
}
* The difference from the dma_v2.c __cleanup() is that this routine
* handles extended descriptors and dma-unmapping raid operations.
*/
-static void __cleanup(struct ioat2_dma_chan *ioat, unsigned long phys_complete)
+static void __cleanup(struct ioat2_dma_chan *ioat, dma_addr_t phys_complete)
{
struct ioat_chan_common *chan = &ioat->base;
struct ioat_ring_ent *desc;
static void ioat3_cleanup(struct ioat2_dma_chan *ioat)
{
struct ioat_chan_common *chan = &ioat->base;
- unsigned long phys_complete;
+ dma_addr_t phys_complete;
spin_lock_bh(&chan->cleanup_lock);
if (ioat_cleanup_preamble(chan, &phys_complete))
static void ioat3_restart_channel(struct ioat2_dma_chan *ioat)
{
struct ioat_chan_common *chan = &ioat->base;
- unsigned long phys_complete;
+ dma_addr_t phys_complete;
ioat2_quiesce(chan, 0);
if (ioat_cleanup_preamble(chan, &phys_complete))
struct ioat_chan_common *chan = &ioat->base;
if (test_bit(IOAT_COMPLETION_PENDING, &chan->state)) {
- unsigned long phys_complete;
+ dma_addr_t phys_complete;
u64 status;
status = ioat_chansts(chan);
return ioat2_reset_sync(chan, msecs_to_jiffies(200));
}
+static bool is_jf_ioat(struct pci_dev *pdev)
+{
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_INTEL_IOAT_JSF0:
+ case PCI_DEVICE_ID_INTEL_IOAT_JSF1:
+ case PCI_DEVICE_ID_INTEL_IOAT_JSF2:
+ case PCI_DEVICE_ID_INTEL_IOAT_JSF3:
+ case PCI_DEVICE_ID_INTEL_IOAT_JSF4:
+ case PCI_DEVICE_ID_INTEL_IOAT_JSF5:
+ case PCI_DEVICE_ID_INTEL_IOAT_JSF6:
+ case PCI_DEVICE_ID_INTEL_IOAT_JSF7:
+ case PCI_DEVICE_ID_INTEL_IOAT_JSF8:
+ case PCI_DEVICE_ID_INTEL_IOAT_JSF9:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool is_snb_ioat(struct pci_dev *pdev)
+{
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_INTEL_IOAT_SNB0:
+ case PCI_DEVICE_ID_INTEL_IOAT_SNB1:
+ case PCI_DEVICE_ID_INTEL_IOAT_SNB2:
+ case PCI_DEVICE_ID_INTEL_IOAT_SNB3:
+ case PCI_DEVICE_ID_INTEL_IOAT_SNB4:
+ case PCI_DEVICE_ID_INTEL_IOAT_SNB5:
+ case PCI_DEVICE_ID_INTEL_IOAT_SNB6:
+ case PCI_DEVICE_ID_INTEL_IOAT_SNB7:
+ case PCI_DEVICE_ID_INTEL_IOAT_SNB8:
+ case PCI_DEVICE_ID_INTEL_IOAT_SNB9:
+ return true;
+ default:
+ return false;
+ }
+}
+
int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca)
{
struct pci_dev *pdev = device->pdev;
dma->device_alloc_chan_resources = ioat2_alloc_chan_resources;
dma->device_free_chan_resources = ioat2_free_chan_resources;
+ if (is_jf_ioat(pdev) || is_snb_ioat(pdev))
+ dma->copy_align = 6;
+
dma_cap_set(DMA_INTERRUPT, dma->cap_mask);
dma->device_prep_dma_interrupt = ioat3_prep_interrupt_lock;
struct page **pq_hw = &pq[IOP_ADMA_NUM_SRC_TEST+2];
/* address conversion buffers (dma_map / page_address) */
void *pq_sw[IOP_ADMA_NUM_SRC_TEST+2];
- dma_addr_t pq_src[IOP_ADMA_NUM_SRC_TEST];
- dma_addr_t pq_dest[2];
+ dma_addr_t pq_src[IOP_ADMA_NUM_SRC_TEST+2];
+ dma_addr_t *pq_dest = &pq_src[IOP_ADMA_NUM_SRC_TEST];
int i;
struct dma_async_tx_descriptor *tx;
static int lowlevel_buffer_allocate(struct drm_device *dev,
unsigned int flags, struct exynos_drm_gem_buf *buf)
{
- dma_addr_t start_addr, end_addr;
+ dma_addr_t start_addr;
unsigned int npages, page_size, i = 0;
struct scatterlist *sgl;
int ret = 0;
DRM_DEBUG_KMS("%s\n", __FILE__);
- if (flags & EXYNOS_BO_NONCONTIG) {
+ if (IS_NONCONTIG_BUFFER(flags)) {
DRM_DEBUG_KMS("not support allocation type.\n");
return -EINVAL;
}
}
if (buf->size >= SZ_1M) {
- npages = (buf->size >> SECTION_SHIFT) + 1;
+ npages = buf->size >> SECTION_SHIFT;
page_size = SECTION_SIZE;
} else if (buf->size >= SZ_64K) {
- npages = (buf->size >> 16) + 1;
+ npages = buf->size >> 16;
page_size = SZ_64K;
} else {
- npages = (buf->size >> PAGE_SHIFT) + 1;
+ npages = buf->size >> PAGE_SHIFT;
page_size = PAGE_SIZE;
}
return -ENOMEM;
}
- buf->kvaddr = dma_alloc_writecombine(dev->dev, buf->size,
- &buf->dma_addr, GFP_KERNEL);
- if (!buf->kvaddr) {
- DRM_ERROR("failed to allocate buffer.\n");
- ret = -ENOMEM;
- goto err1;
- }
-
- start_addr = buf->dma_addr;
- end_addr = buf->dma_addr + buf->size;
-
- buf->pages = kzalloc(sizeof(struct page) * npages, GFP_KERNEL);
- if (!buf->pages) {
- DRM_ERROR("failed to allocate pages.\n");
- ret = -ENOMEM;
- goto err2;
- }
-
- start_addr = buf->dma_addr;
- end_addr = buf->dma_addr + buf->size;
+ buf->kvaddr = dma_alloc_writecombine(dev->dev, buf->size,
+ &buf->dma_addr, GFP_KERNEL);
+ if (!buf->kvaddr) {
+ DRM_ERROR("failed to allocate buffer.\n");
+ ret = -ENOMEM;
+ goto err1;
+ }
buf->pages = kzalloc(sizeof(struct page) * npages, GFP_KERNEL);
if (!buf->pages) {
}
sgl = buf->sgt->sgl;
+ start_addr = buf->dma_addr;
while (i < npages) {
buf->pages[i] = phys_to_page(start_addr);
sg_set_page(sgl, buf->pages[i], page_size, 0);
sg_dma_address(sgl) = start_addr;
start_addr += page_size;
- if (end_addr - start_addr < page_size)
- break;
sgl = sg_next(sgl);
i++;
}
- buf->pages[i] = phys_to_page(start_addr);
-
- sgl = sg_next(sgl);
- sg_set_page(sgl, buf->pages[i+1], end_addr - start_addr, 0);
-
DRM_DEBUG_KMS("vaddr(0x%lx), dma_addr(0x%lx), size(0x%lx)\n",
(unsigned long)buf->kvaddr,
(unsigned long)buf->dma_addr,
* non-continuous memory would be released by exynos
* gem framework.
*/
- if (flags & EXYNOS_BO_NONCONTIG) {
+ if (IS_NONCONTIG_BUFFER(flags)) {
DRM_DEBUG_KMS("not support allocation type.\n");
return;
}
*
* P.S. note that this driver is considered for modularization.
*/
- ret = subdrv->probe(dev, subdrv->manager.dev);
+ ret = subdrv->probe(dev, subdrv->dev);
if (ret)
return ret;
}
- if (subdrv->is_local)
+ if (!subdrv->manager)
return 0;
+ subdrv->manager->dev = subdrv->dev;
+
/* create and initialize a encoder for this sub driver. */
- encoder = exynos_drm_encoder_create(dev, &subdrv->manager,
+ encoder = exynos_drm_encoder_create(dev, subdrv->manager,
(1 << MAX_CRTC) - 1);
if (!encoder) {
DRM_ERROR("failed to create encoder\n");
list_for_each_entry(subdrv, &exynos_drm_subdrv_list, list) {
if (subdrv->open) {
- ret = subdrv->open(dev, subdrv->manager.dev, file);
+ ret = subdrv->open(dev, subdrv->dev, file);
if (ret)
goto err;
}
err:
list_for_each_entry_reverse(subdrv, &subdrv->list, list) {
if (subdrv->close)
- subdrv->close(dev, subdrv->manager.dev, file);
+ subdrv->close(dev, subdrv->dev, file);
}
return ret;
}
list_for_each_entry(subdrv, &exynos_drm_subdrv_list, list) {
if (subdrv->close)
- subdrv->close(dev, subdrv->manager.dev, file);
+ subdrv->close(dev, subdrv->dev, file);
}
}
EXPORT_SYMBOL_GPL(exynos_drm_subdrv_close);
* Exynos drm sub driver structure.
*
* @list: sub driver has its own list object to register to exynos drm driver.
+ * @dev: pointer to device object for subdrv device driver.
* @drm_dev: pointer to drm_device and this pointer would be set
* when sub driver calls exynos_drm_subdrv_register().
- * @is_local: appear encoder and connector disrelated device.
+ * @manager: subdrv has its own manager to control a hardware appropriately
+ * and we can access a hardware drawing on this manager.
* @probe: this callback would be called by exynos drm driver after
* subdrv is registered to it.
* @remove: this callback is used to release resources created
* by probe callback.
* @open: this would be called with drm device file open.
* @close: this would be called with drm device file close.
- * @manager: subdrv has its own manager to control a hardware appropriately
- * and we can access a hardware drawing on this manager.
* @encoder: encoder object owned by this sub driver.
* @connector: connector object owned by this sub driver.
*/
struct exynos_drm_subdrv {
struct list_head list;
+ struct device *dev;
struct drm_device *drm_dev;
- bool is_local;
+ struct exynos_drm_manager *manager;
int (*probe)(struct drm_device *drm_dev, struct device *dev);
void (*remove)(struct drm_device *dev);
void (*close)(struct drm_device *drm_dev, struct device *dev,
struct drm_file *file);
- struct exynos_drm_manager manager;
struct drm_encoder *encoder;
struct drm_connector *connector;
};
static void fimd_apply(struct device *subdrv_dev)
{
struct fimd_context *ctx = get_fimd_context(subdrv_dev);
- struct exynos_drm_manager *mgr = &ctx->subdrv.manager;
+ struct exynos_drm_manager *mgr = ctx->subdrv.manager;
struct exynos_drm_manager_ops *mgr_ops = mgr->ops;
struct exynos_drm_overlay_ops *ovl_ops = mgr->overlay_ops;
struct fimd_win_data *win_data;
.disable = fimd_win_disable,
};
+static struct exynos_drm_manager fimd_manager = {
+ .pipe = -1,
+ .ops = &fimd_manager_ops,
+ .overlay_ops = &fimd_overlay_ops,
+ .display_ops = &fimd_display_ops,
+};
+
static void fimd_finish_pageflip(struct drm_device *drm_dev, int crtc)
{
struct exynos_drm_private *dev_priv = drm_dev->dev_private;
struct fimd_context *ctx = (struct fimd_context *)dev_id;
struct exynos_drm_subdrv *subdrv = &ctx->subdrv;
struct drm_device *drm_dev = subdrv->drm_dev;
- struct exynos_drm_manager *manager = &subdrv->manager;
+ struct exynos_drm_manager *manager = subdrv->manager;
u32 val;
val = readl(ctx->regs + VIDINTCON1);
static int fimd_power_on(struct fimd_context *ctx, bool enable)
{
struct exynos_drm_subdrv *subdrv = &ctx->subdrv;
- struct device *dev = subdrv->manager.dev;
+ struct device *dev = subdrv->dev;
DRM_DEBUG_KMS("%s\n", __FILE__);
subdrv = &ctx->subdrv;
+ subdrv->dev = dev;
+ subdrv->manager = &fimd_manager;
subdrv->probe = fimd_subdrv_probe;
subdrv->remove = fimd_subdrv_remove;
- subdrv->manager.pipe = -1;
- subdrv->manager.ops = &fimd_manager_ops;
- subdrv->manager.overlay_ops = &fimd_overlay_ops;
- subdrv->manager.display_ops = &fimd_display_ops;
- subdrv->manager.dev = dev;
mutex_init(&ctx->lock);
return out_msg;
}
-static unsigned int mask_gem_flags(unsigned int flags)
+static int check_gem_flags(unsigned int flags)
{
- return flags &= EXYNOS_BO_NONCONTIG;
+ if (flags & ~(EXYNOS_BO_MASK)) {
+ DRM_ERROR("invalid flags.\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static unsigned long roundup_gem_size(unsigned long size, unsigned int flags)
+{
+ if (!IS_NONCONTIG_BUFFER(flags)) {
+ if (size >= SZ_1M)
+ return roundup(size, SECTION_SIZE);
+ else if (size >= SZ_64K)
+ return roundup(size, SZ_64K);
+ else
+ goto out;
+ }
+out:
+ return roundup(size, PAGE_SIZE);
}
static struct page **exynos_gem_get_pages(struct drm_gem_object *obj,
struct exynos_drm_gem_buf *buf;
int ret;
- size = roundup(size, PAGE_SIZE);
- DRM_DEBUG_KMS("%s: size = 0x%lx\n", __FILE__, size);
+ if (!size) {
+ DRM_ERROR("invalid size.\n");
+ return ERR_PTR(-EINVAL);
+ }
- flags = mask_gem_flags(flags);
+ size = roundup_gem_size(size, flags);
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ ret = check_gem_flags(flags);
+ if (ret)
+ return ERR_PTR(ret);
buf = exynos_drm_init_buf(dev, size);
if (!buf)
exynos_gem_obj = exynos_drm_gem_init(dev, size);
if (!exynos_gem_obj) {
ret = -ENOMEM;
- goto err;
+ goto err_fini_buf;
}
exynos_gem_obj->buffer = buf;
ret = exynos_drm_gem_get_pages(&exynos_gem_obj->base);
if (ret < 0) {
drm_gem_object_release(&exynos_gem_obj->base);
- goto err;
+ goto err_fini_buf;
}
} else {
ret = exynos_drm_alloc_buf(dev, buf, flags);
if (ret < 0) {
drm_gem_object_release(&exynos_gem_obj->base);
- goto err;
+ goto err_fini_buf;
}
}
return exynos_gem_obj;
-err:
+
+err_fini_buf:
exynos_drm_fini_buf(dev, buf);
return ERR_PTR(ret);
}
#define to_exynos_gem_obj(x) container_of(x,\
struct exynos_drm_gem_obj, base)
+#define IS_NONCONTIG_BUFFER(f) (f & EXYNOS_BO_NONCONTIG)
+
/*
* exynos drm gem buffer structure.
*
struct drm_hdmi_context, subdrv);
/* these callback points shoud be set by specific drivers. */
-static struct exynos_hdmi_display_ops *hdmi_display_ops;
-static struct exynos_hdmi_manager_ops *hdmi_manager_ops;
-static struct exynos_hdmi_overlay_ops *hdmi_overlay_ops;
+static struct exynos_hdmi_ops *hdmi_ops;
+static struct exynos_mixer_ops *mixer_ops;
struct drm_hdmi_context {
struct exynos_drm_subdrv subdrv;
struct exynos_drm_hdmi_context *mixer_ctx;
};
-void exynos_drm_display_ops_register(struct exynos_hdmi_display_ops
- *display_ops)
+void exynos_hdmi_ops_register(struct exynos_hdmi_ops *ops)
{
DRM_DEBUG_KMS("%s\n", __FILE__);
- if (display_ops)
- hdmi_display_ops = display_ops;
+ if (ops)
+ hdmi_ops = ops;
}
-void exynos_drm_manager_ops_register(struct exynos_hdmi_manager_ops
- *manager_ops)
+void exynos_mixer_ops_register(struct exynos_mixer_ops *ops)
{
DRM_DEBUG_KMS("%s\n", __FILE__);
- if (manager_ops)
- hdmi_manager_ops = manager_ops;
-}
-
-void exynos_drm_overlay_ops_register(struct exynos_hdmi_overlay_ops
- *overlay_ops)
-{
- DRM_DEBUG_KMS("%s\n", __FILE__);
-
- if (overlay_ops)
- hdmi_overlay_ops = overlay_ops;
+ if (ops)
+ mixer_ops = ops;
}
static bool drm_hdmi_is_connected(struct device *dev)
DRM_DEBUG_KMS("%s\n", __FILE__);
- if (hdmi_display_ops && hdmi_display_ops->is_connected)
- return hdmi_display_ops->is_connected(ctx->hdmi_ctx->ctx);
+ if (hdmi_ops && hdmi_ops->is_connected)
+ return hdmi_ops->is_connected(ctx->hdmi_ctx->ctx);
return false;
}
DRM_DEBUG_KMS("%s\n", __FILE__);
- if (hdmi_display_ops && hdmi_display_ops->get_edid)
- return hdmi_display_ops->get_edid(ctx->hdmi_ctx->ctx,
- connector, edid, len);
+ if (hdmi_ops && hdmi_ops->get_edid)
+ return hdmi_ops->get_edid(ctx->hdmi_ctx->ctx, connector, edid,
+ len);
return 0;
}
DRM_DEBUG_KMS("%s\n", __FILE__);
- if (hdmi_display_ops && hdmi_display_ops->check_timing)
- return hdmi_display_ops->check_timing(ctx->hdmi_ctx->ctx,
- timing);
+ if (hdmi_ops && hdmi_ops->check_timing)
+ return hdmi_ops->check_timing(ctx->hdmi_ctx->ctx, timing);
return 0;
}
DRM_DEBUG_KMS("%s\n", __FILE__);
- if (hdmi_display_ops && hdmi_display_ops->power_on)
- return hdmi_display_ops->power_on(ctx->hdmi_ctx->ctx, mode);
+ if (hdmi_ops && hdmi_ops->power_on)
+ return hdmi_ops->power_on(ctx->hdmi_ctx->ctx, mode);
return 0;
}
{
struct drm_hdmi_context *ctx = to_context(subdrv_dev);
struct exynos_drm_subdrv *subdrv = &ctx->subdrv;
- struct exynos_drm_manager *manager = &subdrv->manager;
+ struct exynos_drm_manager *manager = subdrv->manager;
DRM_DEBUG_KMS("%s\n", __FILE__);
- if (hdmi_overlay_ops && hdmi_overlay_ops->enable_vblank)
- return hdmi_overlay_ops->enable_vblank(ctx->mixer_ctx->ctx,
- manager->pipe);
+ if (mixer_ops && mixer_ops->enable_vblank)
+ return mixer_ops->enable_vblank(ctx->mixer_ctx->ctx,
+ manager->pipe);
return 0;
}
DRM_DEBUG_KMS("%s\n", __FILE__);
- if (hdmi_overlay_ops && hdmi_overlay_ops->disable_vblank)
- return hdmi_overlay_ops->disable_vblank(ctx->mixer_ctx->ctx);
+ if (mixer_ops && mixer_ops->disable_vblank)
+ return mixer_ops->disable_vblank(ctx->mixer_ctx->ctx);
}
static void drm_hdmi_mode_fixup(struct device *subdrv_dev,
DRM_DEBUG_KMS("%s\n", __FILE__);
- if (hdmi_manager_ops && hdmi_manager_ops->mode_fixup)
- hdmi_manager_ops->mode_fixup(ctx->hdmi_ctx->ctx, connector,
- mode, adjusted_mode);
+ if (hdmi_ops && hdmi_ops->mode_fixup)
+ hdmi_ops->mode_fixup(ctx->hdmi_ctx->ctx, connector, mode,
+ adjusted_mode);
}
static void drm_hdmi_mode_set(struct device *subdrv_dev, void *mode)
DRM_DEBUG_KMS("%s\n", __FILE__);
- if (hdmi_manager_ops && hdmi_manager_ops->mode_set)
- hdmi_manager_ops->mode_set(ctx->hdmi_ctx->ctx, mode);
+ if (hdmi_ops && hdmi_ops->mode_set)
+ hdmi_ops->mode_set(ctx->hdmi_ctx->ctx, mode);
}
static void drm_hdmi_get_max_resol(struct device *subdrv_dev,
DRM_DEBUG_KMS("%s\n", __FILE__);
- if (hdmi_manager_ops && hdmi_manager_ops->get_max_resol)
- hdmi_manager_ops->get_max_resol(ctx->hdmi_ctx->ctx, width,
- height);
+ if (hdmi_ops && hdmi_ops->get_max_resol)
+ hdmi_ops->get_max_resol(ctx->hdmi_ctx->ctx, width, height);
}
static void drm_hdmi_commit(struct device *subdrv_dev)
DRM_DEBUG_KMS("%s\n", __FILE__);
- if (hdmi_manager_ops && hdmi_manager_ops->commit)
- hdmi_manager_ops->commit(ctx->hdmi_ctx->ctx);
+ if (hdmi_ops && hdmi_ops->commit)
+ hdmi_ops->commit(ctx->hdmi_ctx->ctx);
}
static void drm_hdmi_dpms(struct device *subdrv_dev, int mode)
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
case DRM_MODE_DPMS_OFF:
- if (hdmi_manager_ops && hdmi_manager_ops->disable)
- hdmi_manager_ops->disable(ctx->hdmi_ctx->ctx);
+ if (hdmi_ops && hdmi_ops->disable)
+ hdmi_ops->disable(ctx->hdmi_ctx->ctx);
break;
default:
DRM_DEBUG_KMS("unkown dps mode: %d\n", mode);
DRM_DEBUG_KMS("%s\n", __FILE__);
- if (hdmi_overlay_ops && hdmi_overlay_ops->win_mode_set)
- hdmi_overlay_ops->win_mode_set(ctx->mixer_ctx->ctx, overlay);
+ if (mixer_ops && mixer_ops->win_mode_set)
+ mixer_ops->win_mode_set(ctx->mixer_ctx->ctx, overlay);
}
static void drm_mixer_commit(struct device *subdrv_dev, int zpos)
DRM_DEBUG_KMS("%s\n", __FILE__);
- if (hdmi_overlay_ops && hdmi_overlay_ops->win_commit)
- hdmi_overlay_ops->win_commit(ctx->mixer_ctx->ctx, zpos);
+ if (mixer_ops && mixer_ops->win_commit)
+ mixer_ops->win_commit(ctx->mixer_ctx->ctx, zpos);
}
static void drm_mixer_disable(struct device *subdrv_dev, int zpos)
DRM_DEBUG_KMS("%s\n", __FILE__);
- if (hdmi_overlay_ops && hdmi_overlay_ops->win_disable)
- hdmi_overlay_ops->win_disable(ctx->mixer_ctx->ctx, zpos);
+ if (mixer_ops && mixer_ops->win_disable)
+ mixer_ops->win_disable(ctx->mixer_ctx->ctx, zpos);
}
static struct exynos_drm_overlay_ops drm_hdmi_overlay_ops = {
.disable = drm_mixer_disable,
};
+static struct exynos_drm_manager hdmi_manager = {
+ .pipe = -1,
+ .ops = &drm_hdmi_manager_ops,
+ .overlay_ops = &drm_hdmi_overlay_ops,
+ .display_ops = &drm_hdmi_display_ops,
+};
static int hdmi_subdrv_probe(struct drm_device *drm_dev,
struct device *dev)
subdrv = &ctx->subdrv;
+ subdrv->dev = dev;
+ subdrv->manager = &hdmi_manager;
subdrv->probe = hdmi_subdrv_probe;
- subdrv->manager.pipe = -1;
- subdrv->manager.ops = &drm_hdmi_manager_ops;
- subdrv->manager.overlay_ops = &drm_hdmi_overlay_ops;
- subdrv->manager.display_ops = &drm_hdmi_display_ops;
- subdrv->manager.dev = dev;
platform_set_drvdata(pdev, subdrv);
void *ctx;
};
-struct exynos_hdmi_display_ops {
+struct exynos_hdmi_ops {
+ /* display */
bool (*is_connected)(void *ctx);
int (*get_edid)(void *ctx, struct drm_connector *connector,
u8 *edid, int len);
int (*check_timing)(void *ctx, void *timing);
int (*power_on)(void *ctx, int mode);
-};
-struct exynos_hdmi_manager_ops {
+ /* manager */
void (*mode_fixup)(void *ctx, struct drm_connector *connector,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
void (*disable)(void *ctx);
};
-struct exynos_hdmi_overlay_ops {
+struct exynos_mixer_ops {
+ /* manager */
int (*enable_vblank)(void *ctx, int pipe);
void (*disable_vblank)(void *ctx);
+
+ /* overlay */
void (*win_mode_set)(void *ctx, struct exynos_drm_overlay *overlay);
void (*win_commit)(void *ctx, int zpos);
void (*win_disable)(void *ctx, int zpos);
};
-extern struct platform_driver hdmi_driver;
-extern struct platform_driver mixer_driver;
-
-void exynos_drm_display_ops_register(struct exynos_hdmi_display_ops
- *display_ops);
-void exynos_drm_manager_ops_register(struct exynos_hdmi_manager_ops
- *manager_ops);
-void exynos_drm_overlay_ops_register(struct exynos_hdmi_overlay_ops
- *overlay_ops);
-
+void exynos_hdmi_ops_register(struct exynos_hdmi_ops *ops);
+void exynos_mixer_ops_register(struct exynos_mixer_ops *ops);
#endif
static const uint32_t formats[] = {
DRM_FORMAT_XRGB8888,
+ DRM_FORMAT_ARGB8888,
+ DRM_FORMAT_NV12,
+ DRM_FORMAT_NV12M,
+ DRM_FORMAT_NV12MT,
};
static int
static void vidi_apply(struct device *subdrv_dev)
{
struct vidi_context *ctx = get_vidi_context(subdrv_dev);
- struct exynos_drm_manager *mgr = &ctx->subdrv.manager;
+ struct exynos_drm_manager *mgr = ctx->subdrv.manager;
struct exynos_drm_manager_ops *mgr_ops = mgr->ops;
struct exynos_drm_overlay_ops *ovl_ops = mgr->overlay_ops;
struct vidi_win_data *win_data;
.disable = vidi_win_disable,
};
+static struct exynos_drm_manager vidi_manager = {
+ .pipe = -1,
+ .ops = &vidi_manager_ops,
+ .overlay_ops = &vidi_overlay_ops,
+ .display_ops = &vidi_display_ops,
+};
+
static void vidi_finish_pageflip(struct drm_device *drm_dev, int crtc)
{
struct exynos_drm_private *dev_priv = drm_dev->dev_private;
struct vidi_context *ctx = container_of(work, struct vidi_context,
work);
struct exynos_drm_subdrv *subdrv = &ctx->subdrv;
- struct exynos_drm_manager *manager = &subdrv->manager;
+ struct exynos_drm_manager *manager = subdrv->manager;
if (manager->pipe < 0)
return;
static int vidi_power_on(struct vidi_context *ctx, bool enable)
{
struct exynos_drm_subdrv *subdrv = &ctx->subdrv;
- struct device *dev = subdrv->manager.dev;
+ struct device *dev = subdrv->dev;
DRM_DEBUG_KMS("%s\n", __FILE__);
ctx->raw_edid = (struct edid *)fake_edid_info;
subdrv = &ctx->subdrv;
+ subdrv->dev = dev;
+ subdrv->manager = &vidi_manager;
subdrv->probe = vidi_subdrv_probe;
subdrv->remove = vidi_subdrv_remove;
- subdrv->manager.pipe = -1;
- subdrv->manager.ops = &vidi_manager_ops;
- subdrv->manager.overlay_ops = &vidi_overlay_ops;
- subdrv->manager.display_ops = &vidi_display_ops;
- subdrv->manager.dev = dev;
mutex_init(&ctx->lock);
#include "exynos_hdmi.h"
-#define HDMI_OVERLAY_NUMBER 3
#define MAX_WIDTH 1920
#define MAX_HEIGHT 1080
#define get_hdmi_context(dev) platform_get_drvdata(to_platform_device(dev))
static bool hdmi_is_connected(void *ctx)
{
- struct hdmi_context *hdata = (struct hdmi_context *)ctx;
+ struct hdmi_context *hdata = ctx;
u32 val = hdmi_reg_read(hdata, HDMI_HPD_STATUS);
if (val)
u8 *edid, int len)
{
struct edid *raw_edid;
- struct hdmi_context *hdata = (struct hdmi_context *)ctx;
+ struct hdmi_context *hdata = ctx;
DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__);
static int hdmi_check_timing(void *ctx, void *timing)
{
- struct hdmi_context *hdata = (struct hdmi_context *)ctx;
+ struct hdmi_context *hdata = ctx;
struct fb_videomode *check_timing = timing;
DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__);
return 0;
}
-static struct exynos_hdmi_display_ops display_ops = {
- .is_connected = hdmi_is_connected,
- .get_edid = hdmi_get_edid,
- .check_timing = hdmi_check_timing,
- .power_on = hdmi_display_power_on,
-};
-
static void hdmi_set_acr(u32 freq, u8 *acr)
{
u32 n, cts;
struct drm_display_mode *adjusted_mode)
{
struct drm_display_mode *m;
- struct hdmi_context *hdata = (struct hdmi_context *)ctx;
+ struct hdmi_context *hdata = ctx;
int index;
DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__);
static void hdmi_mode_set(void *ctx, void *mode)
{
- struct hdmi_context *hdata = (struct hdmi_context *)ctx;
+ struct hdmi_context *hdata = ctx;
int conf_idx;
DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__);
static void hdmi_commit(void *ctx)
{
- struct hdmi_context *hdata = (struct hdmi_context *)ctx;
+ struct hdmi_context *hdata = ctx;
DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__);
static void hdmi_disable(void *ctx)
{
- struct hdmi_context *hdata = (struct hdmi_context *)ctx;
+ struct hdmi_context *hdata = ctx;
DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__);
}
}
-static struct exynos_hdmi_manager_ops manager_ops = {
+static struct exynos_hdmi_ops hdmi_ops = {
+ /* display */
+ .is_connected = hdmi_is_connected,
+ .get_edid = hdmi_get_edid,
+ .check_timing = hdmi_check_timing,
+ .power_on = hdmi_display_power_on,
+
+ /* manager */
.mode_fixup = hdmi_mode_fixup,
.mode_set = hdmi_mode_set,
.get_max_resol = hdmi_get_max_resol,
static irqreturn_t hdmi_irq_handler(int irq, void *arg)
{
struct exynos_drm_hdmi_context *ctx = arg;
- struct hdmi_context *hdata = (struct hdmi_context *)ctx->ctx;
+ struct hdmi_context *hdata = ctx->ctx;
u32 intc_flag;
intc_flag = hdmi_reg_read(hdata, HDMI_INTC_FLAG);
DRM_DEBUG_KMS("%s\n", __func__);
- hdmi_resource_poweroff((struct hdmi_context *)ctx->ctx);
+ hdmi_resource_poweroff(ctx->ctx);
return 0;
}
DRM_DEBUG_KMS("%s\n", __func__);
- hdmi_resource_poweron((struct hdmi_context *)ctx->ctx);
+ hdmi_resource_poweron(ctx->ctx);
return 0;
}
hdata->irq = res->start;
/* register specific callbacks to common hdmi. */
- exynos_drm_display_ops_register(&display_ops);
- exynos_drm_manager_ops_register(&manager_ops);
+ exynos_hdmi_ops_register(&hdmi_ops);
hdmi_resource_poweron(hdata);
static int __devexit hdmi_remove(struct platform_device *pdev)
{
struct exynos_drm_hdmi_context *ctx = platform_get_drvdata(pdev);
- struct hdmi_context *hdata = (struct hdmi_context *)ctx->ctx;
+ struct hdmi_context *hdata = ctx->ctx;
DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__);
#include "exynos_drm_drv.h"
#include "exynos_drm_hdmi.h"
-#define HDMI_OVERLAY_NUMBER 3
+#define MIXER_WIN_NR 3
+#define MIXER_DEFAULT_WIN 0
#define get_mixer_context(dev) platform_get_drvdata(to_platform_device(dev))
};
struct mixer_context {
- struct fb_videomode *default_timing;
- unsigned int default_win;
- unsigned int default_bpp;
unsigned int irq;
int pipe;
bool interlace;
- bool vp_enabled;
struct mixer_resources mixer_res;
- struct hdmi_win_data win_data[HDMI_OVERLAY_NUMBER];
+ struct hdmi_win_data win_data[MIXER_WIN_NR];
};
static const u8 filter_y_horiz_tap8[] = {
win = overlay->zpos;
if (win == DEFAULT_ZPOS)
- win = mixer_ctx->default_win;
+ win = MIXER_DEFAULT_WIN;
- if (win < 0 || win > HDMI_OVERLAY_NUMBER) {
+ if (win < 0 || win > MIXER_WIN_NR) {
DRM_ERROR("overlay plane[%d] is wrong\n", win);
return;
}
DRM_DEBUG_KMS("[%d] %s, win: %d\n", __LINE__, __func__, win);
if (win == DEFAULT_ZPOS)
- win = mixer_ctx->default_win;
+ win = MIXER_DEFAULT_WIN;
- if (win < 0 || win > HDMI_OVERLAY_NUMBER) {
+ if (win < 0 || win > MIXER_WIN_NR) {
DRM_ERROR("overlay plane[%d] is wrong\n", win);
return;
}
DRM_DEBUG_KMS("[%d] %s, win: %d\n", __LINE__, __func__, win);
if (win == DEFAULT_ZPOS)
- win = mixer_ctx->default_win;
+ win = MIXER_DEFAULT_WIN;
- if (win < 0 || win > HDMI_OVERLAY_NUMBER) {
+ if (win < 0 || win > MIXER_WIN_NR) {
DRM_ERROR("overlay plane[%d] is wrong\n", win);
return;
}
spin_unlock_irqrestore(&res->reg_slock, flags);
}
-static struct exynos_hdmi_overlay_ops overlay_ops = {
+static struct exynos_mixer_ops mixer_ops = {
+ /* manager */
.enable_vblank = mixer_enable_vblank,
.disable_vblank = mixer_disable_vblank,
+
+ /* overlay */
.win_mode_set = mixer_win_mode_set,
.win_commit = mixer_win_commit,
.win_disable = mixer_win_disable,
static irqreturn_t mixer_irq_handler(int irq, void *arg)
{
struct exynos_drm_hdmi_context *drm_hdmi_ctx = arg;
- struct mixer_context *ctx =
- (struct mixer_context *)drm_hdmi_ctx->ctx;
+ struct mixer_context *ctx = drm_hdmi_ctx->ctx;
struct mixer_resources *res = &ctx->mixer_res;
u32 val, val_base;
DRM_DEBUG_KMS("resume - start\n");
- mixer_resource_poweron((struct mixer_context *)ctx->ctx);
+ mixer_resource_poweron(ctx->ctx);
return 0;
}
DRM_DEBUG_KMS("suspend - start\n");
- mixer_resource_poweroff((struct mixer_context *)ctx->ctx);
+ mixer_resource_poweroff(ctx->ctx);
return 0;
}
static int __devinit mixer_resources_init(struct exynos_drm_hdmi_context *ctx,
struct platform_device *pdev)
{
- struct mixer_context *mixer_ctx =
- (struct mixer_context *)ctx->ctx;
+ struct mixer_context *mixer_ctx = ctx->ctx;
struct device *dev = &pdev->dev;
struct mixer_resources *mixer_res = &mixer_ctx->mixer_res;
struct resource *res;
goto fail;
/* register specific callback point to common hdmi. */
- exynos_drm_overlay_ops_register(&overlay_ops);
+ exynos_mixer_ops_register(&mixer_ops);
mixer_resource_poweron(ctx);
struct device *dev = &pdev->dev;
struct exynos_drm_hdmi_context *drm_hdmi_ctx =
platform_get_drvdata(pdev);
- struct mixer_context *ctx = (struct mixer_context *)drm_hdmi_ctx->ctx;
+ struct mixer_context *ctx = drm_hdmi_ctx->ctx;
dev_info(dev, "remove successful\n");
"Use semaphores for inter-ring sync (default: -1 (use per-chip defaults))");
int i915_enable_rc6 __read_mostly = -1;
-module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600);
+module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0400);
MODULE_PARM_DESC(i915_enable_rc6,
"Enable power-saving render C-state 6. "
"Different stages can be selected via bitmask values "
{
list_del_init(&obj->ring_list);
obj->last_rendering_seqno = 0;
+ obj->last_fenced_seqno = 0;
}
static void
BUG_ON(!list_empty(&obj->gpu_write_list));
BUG_ON(!obj->active);
obj->ring = NULL;
+ obj->last_fenced_ring = NULL;
i915_gem_object_move_off_active(obj);
obj->fenced_gpu_access = false;
#define GT_FIFO_FREE_ENTRIES 0x120008
#define GT_FIFO_NUM_RESERVED_ENTRIES 20
+#define GEN6_UCGCTL1 0x9400
+# define GEN6_BLBUNIT_CLOCK_GATE_DISABLE (1 << 5)
+
#define GEN6_UCGCTL2 0x9404
# define GEN6_RCZUNIT_CLOCK_GATE_DISABLE (1 << 13)
# define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE (1 << 12)
return 0;
}
+static int
+intel_finish_fb(struct drm_framebuffer *old_fb)
+{
+ struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj;
+ struct drm_i915_private *dev_priv = obj->base.dev->dev_private;
+ bool was_interruptible = dev_priv->mm.interruptible;
+ int ret;
+
+ wait_event(dev_priv->pending_flip_queue,
+ atomic_read(&dev_priv->mm.wedged) ||
+ atomic_read(&obj->pending_flip) == 0);
+
+ /* Big Hammer, we also need to ensure that any pending
+ * MI_WAIT_FOR_EVENT inside a user batch buffer on the
+ * current scanout is retired before unpinning the old
+ * framebuffer.
+ *
+ * This should only fail upon a hung GPU, in which case we
+ * can safely continue.
+ */
+ dev_priv->mm.interruptible = false;
+ ret = i915_gem_object_finish_gpu(obj);
+ dev_priv->mm.interruptible = was_interruptible;
+
+ return ret;
+}
+
static int
intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
struct drm_framebuffer *old_fb)
return ret;
}
- if (old_fb) {
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj;
-
- wait_event(dev_priv->pending_flip_queue,
- atomic_read(&dev_priv->mm.wedged) ||
- atomic_read(&obj->pending_flip) == 0);
-
- /* Big Hammer, we also need to ensure that any pending
- * MI_WAIT_FOR_EVENT inside a user batch buffer on the
- * current scanout is retired before unpinning the old
- * framebuffer.
- *
- * This should only fail upon a hung GPU, in which case we
- * can safely continue.
- */
- ret = i915_gem_object_finish_gpu(obj);
- (void) ret;
- }
+ if (old_fb)
+ intel_finish_fb(old_fb);
ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y,
LEAVE_ATOMIC_MODE_SET);
struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
struct drm_device *dev = crtc->dev;
+ /* Flush any pending WAITs before we disable the pipe. Note that
+ * we need to drop the struct_mutex in order to acquire it again
+ * during the lowlevel dpms routines around a couple of the
+ * operations. It does not look trivial nor desirable to move
+ * that locking higher. So instead we leave a window for the
+ * submission of further commands on the fb before we can actually
+ * disable it. This race with userspace exists anyway, and we can
+ * only rely on the pipe being disabled by userspace after it
+ * receives the hotplug notification and has flushed any pending
+ * batches.
+ */
+ if (crtc->fb) {
+ mutex_lock(&dev->struct_mutex);
+ intel_finish_fb(crtc->fb);
+ mutex_unlock(&dev->struct_mutex);
+ }
+
crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane);
assert_pipe_disabled(dev->dev_private, to_intel_crtc(crtc)->pipe);
I915_WRITE(WM2_LP_ILK, 0);
I915_WRITE(WM1_LP_ILK, 0);
+ I915_WRITE(GEN6_UCGCTL1,
+ I915_READ(GEN6_UCGCTL1) |
+ GEN6_BLBUNIT_CLOCK_GATE_DISABLE);
+
/* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock
* gating disable must be set. Failure to set it results in
* flickering pixels due to Z write ordering failures after
return (max_link_clock * max_lanes * 8) / 10;
}
+static bool
+intel_dp_adjust_dithering(struct intel_dp *intel_dp,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp));
+ int max_lanes = intel_dp_max_lane_count(intel_dp);
+ int max_rate, mode_rate;
+
+ mode_rate = intel_dp_link_required(mode->clock, 24);
+ max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes);
+
+ if (mode_rate > max_rate) {
+ mode_rate = intel_dp_link_required(mode->clock, 18);
+ if (mode_rate > max_rate)
+ return false;
+
+ if (adjusted_mode)
+ adjusted_mode->private_flags
+ |= INTEL_MODE_DP_FORCE_6BPC;
+
+ return true;
+ }
+
+ return true;
+}
+
static int
intel_dp_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct intel_dp *intel_dp = intel_attached_dp(connector);
- int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp));
- int max_lanes = intel_dp_max_lane_count(intel_dp);
- int max_rate, mode_rate;
if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) {
if (mode->hdisplay > intel_dp->panel_fixed_mode->hdisplay)
return MODE_PANEL;
}
- mode_rate = intel_dp_link_required(mode->clock, 24);
- max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes);
-
- if (mode_rate > max_rate) {
- mode_rate = intel_dp_link_required(mode->clock, 18);
- if (mode_rate > max_rate)
- return MODE_CLOCK_HIGH;
- else
- mode->private_flags |= INTEL_MODE_DP_FORCE_6BPC;
- }
+ if (!intel_dp_adjust_dithering(intel_dp, mode, NULL))
+ return MODE_CLOCK_HIGH;
if (mode->clock < 10000)
return MODE_CLOCK_LOW;
int lane_count, clock;
int max_lane_count = intel_dp_max_lane_count(intel_dp);
int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0;
- int bpp = mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 24;
+ int bpp;
static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) {
mode->clock = intel_dp->panel_fixed_mode->clock;
}
+ if (!intel_dp_adjust_dithering(intel_dp, mode, adjusted_mode))
+ return false;
+
+ bpp = adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 24;
+
for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
for (clock = 0; clock <= max_clock; clock++) {
int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
bus->has_gpio = intel_gpio_setup(bus, i);
/* XXX force bit banging until GMBUS is fully debugged */
- if (bus->has_gpio && IS_GEN2(dev))
+ if (bus->has_gpio)
bus->force_bit = true;
}
* of the buffer.
*/
ring->effective_size = ring->size;
- if (IS_I830(ring->dev))
+ if (IS_I830(ring->dev) || IS_845G(ring->dev))
ring->effective_size -= 128;
return 0;
/* must disable */
sprctl |= SPRITE_TRICKLE_FEED_DISABLE;
sprctl |= SPRITE_ENABLE;
- sprctl |= SPRITE_DEST_KEY;
/* Sizes are 0 based */
src_w--;
if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
return;
+ /* some R4xx chips have the wrong frev */
+ if (rdev->family <= CHIP_RV410)
+ frev = 1;
+
switch (frev) {
case 1:
switch (crev) {
* or the chip could hang on a subsequent access
*/
if (rdev->pll_errata & CHIP_ERRATA_PLL_DELAY) {
- udelay(5000);
+ mdelay(5);
}
/* This function is required to workaround a hardware bug in some (all?)
/* r7xx asics need to soft reset RLC before halting */
WREG32(SRBM_SOFT_RESET, SOFT_RESET_RLC);
RREG32(SRBM_SOFT_RESET);
- udelay(15000);
+ mdelay(15);
WREG32(SRBM_SOFT_RESET, 0);
RREG32(SRBM_SOFT_RESET);
}
RADEON_WRITE(R600_GRBM_SOFT_RESET, R600_SOFT_RESET_CP);
RADEON_READ(R600_GRBM_SOFT_RESET);
- DRM_UDELAY(15000);
+ mdelay(15);
RADEON_WRITE(R600_GRBM_SOFT_RESET, 0);
fw_data = (const __be32 *)dev_priv->me_fw->data;
RADEON_WRITE(R600_GRBM_SOFT_RESET, R600_SOFT_RESET_CP);
RADEON_READ(R600_GRBM_SOFT_RESET);
- DRM_UDELAY(15000);
+ mdelay(15);
RADEON_WRITE(R600_GRBM_SOFT_RESET, 0);
fw_data = (const __be32 *)dev_priv->pfp_fw->data;
RADEON_WRITE(R600_GRBM_SOFT_RESET, R600_SOFT_RESET_CP);
RADEON_READ(R600_GRBM_SOFT_RESET);
- DRM_UDELAY(15000);
+ mdelay(15);
RADEON_WRITE(R600_GRBM_SOFT_RESET, 0);
tmp &= ~(R300_SCLK_FORCE_VAP);
tmp |= RADEON_SCLK_FORCE_CP;
WREG32_PLL(RADEON_SCLK_CNTL, tmp);
- udelay(15000);
+ mdelay(15);
tmp = RREG32_PLL(R300_SCLK_CNTL2);
tmp &= ~(R300_SCLK_FORCE_TCL |
tmp |= (RADEON_ENGIN_DYNCLK_MODE |
(0x01 << RADEON_ACTIVE_HILO_LAT_SHIFT));
WREG32_PLL(RADEON_CLK_PWRMGT_CNTL, tmp);
- udelay(15000);
+ mdelay(15);
tmp = RREG32_PLL(RADEON_CLK_PIN_CNTL);
tmp |= RADEON_SCLK_DYN_START_CNTL;
WREG32_PLL(RADEON_CLK_PIN_CNTL, tmp);
- udelay(15000);
+ mdelay(15);
/* When DRI is enabled, setting DYN_STOP_LAT to zero can cause some R200
to lockup randomly, leave them as set by BIOS.
tmp |= RADEON_SCLK_MORE_FORCEON;
}
WREG32_PLL(RADEON_SCLK_MORE_CNTL, tmp);
- udelay(15000);
+ mdelay(15);
}
/* RV200::A11 A12, RV250::A11 A12 */
tmp |= RADEON_TCL_BYPASS_DISABLE;
WREG32_PLL(RADEON_PLL_PWRMGT_CNTL, tmp);
}
- udelay(15000);
+ mdelay(15);
/*enable dynamic mode for display clocks (PIXCLK and PIX2CLK) */
tmp = RREG32_PLL(RADEON_PIXCLKS_CNTL);
RADEON_PIXCLK_TMDS_ALWAYS_ONb);
WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp);
- udelay(15000);
+ mdelay(15);
tmp = RREG32_PLL(RADEON_VCLK_ECP_CNTL);
tmp |= (RADEON_PIXCLK_ALWAYS_ONb |
RADEON_PIXCLK_DAC_ALWAYS_ONb);
WREG32_PLL(RADEON_VCLK_ECP_CNTL, tmp);
- udelay(15000);
+ mdelay(15);
}
} else {
/* Turn everything OFF (ForceON to everything) */
}
WREG32_PLL(RADEON_SCLK_CNTL, tmp);
- udelay(16000);
+ mdelay(16);
if ((rdev->family == CHIP_R300) ||
(rdev->family == CHIP_R350)) {
R300_SCLK_FORCE_GA |
R300_SCLK_FORCE_CBA);
WREG32_PLL(R300_SCLK_CNTL2, tmp);
- udelay(16000);
+ mdelay(16);
}
if (rdev->flags & RADEON_IS_IGP) {
tmp &= ~(RADEON_FORCEON_MCLKA |
RADEON_FORCEON_YCLKA);
WREG32_PLL(RADEON_MCLK_CNTL, tmp);
- udelay(16000);
+ mdelay(16);
}
if ((rdev->family == CHIP_RV200) ||
tmp = RREG32_PLL(RADEON_SCLK_MORE_CNTL);
tmp |= RADEON_SCLK_MORE_FORCEON;
WREG32_PLL(RADEON_SCLK_MORE_CNTL, tmp);
- udelay(16000);
+ mdelay(16);
}
tmp = RREG32_PLL(RADEON_PIXCLKS_CNTL);
RADEON_PIXCLK_TMDS_ALWAYS_ONb);
WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp);
- udelay(16000);
+ mdelay(16);
tmp = RREG32_PLL(RADEON_VCLK_ECP_CNTL);
tmp &= ~(RADEON_PIXCLK_ALWAYS_ONb |
case 4:
val = RBIOS16(index);
index += 2;
- udelay(val * 1000);
+ mdelay(val);
break;
case 6:
slave_addr = id & 0xff;
udelay(150);
break;
case 2:
- udelay(1000);
+ mdelay(1);
break;
case 3:
while (tmp--) {
/*mclk_cntl |= 0x00001111;*//* ??? */
WREG32_PLL(RADEON_MCLK_CNTL,
mclk_cntl);
- udelay(10000);
+ mdelay(10);
#endif
WREG32_PLL
(RADEON_CLK_PWRMGT_CNTL,
tmp &
~RADEON_CG_NO1_DEBUG_0);
- udelay(10000);
+ mdelay(10);
}
break;
default:
struct radeon_i2c_chan *i2c;
int ret;
+ /* don't add the mm_i2c bus unless hw_i2c is enabled */
+ if (rec->mm_i2c && (radeon_hw_i2c == 0))
+ return NULL;
+
i2c = kzalloc(sizeof(struct radeon_i2c_chan), GFP_KERNEL);
if (i2c == NULL)
return NULL;
lvds_pll_cntl = RREG32(RADEON_LVDS_PLL_CNTL);
lvds_pll_cntl |= RADEON_LVDS_PLL_EN;
WREG32(RADEON_LVDS_PLL_CNTL, lvds_pll_cntl);
- udelay(1000);
+ mdelay(1);
lvds_pll_cntl = RREG32(RADEON_LVDS_PLL_CNTL);
lvds_pll_cntl &= ~RADEON_LVDS_PLL_RESET;
(backlight_level << RADEON_LVDS_BL_MOD_LEVEL_SHIFT));
if (is_mac)
lvds_gen_cntl |= RADEON_LVDS_BL_MOD_EN;
- udelay(panel_pwr_delay * 1000);
+ mdelay(panel_pwr_delay);
WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
break;
case DRM_MODE_DPMS_STANDBY:
WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
lvds_gen_cntl &= ~(RADEON_LVDS_ON | RADEON_LVDS_BLON | RADEON_LVDS_EN | RADEON_LVDS_DIGON);
}
- udelay(panel_pwr_delay * 1000);
+ mdelay(panel_pwr_delay);
WREG32(RADEON_LVDS_GEN_CNTL, lvds_gen_cntl);
WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl);
- udelay(panel_pwr_delay * 1000);
+ mdelay(panel_pwr_delay);
break;
}
WREG32(RADEON_DAC_MACRO_CNTL, tmp);
- udelay(2000);
+ mdelay(2);
if (RREG32(RADEON_DAC_CNTL) & RADEON_DAC_CMP_OUTPUT)
found = connector_status_connected;
tmp = dac_cntl2 | RADEON_DAC2_DAC2_CLK_SEL | RADEON_DAC2_CMP_EN;
WREG32(RADEON_DAC_CNTL2, tmp);
- udelay(10000);
+ mdelay(10);
if (ASIC_IS_R300(rdev)) {
if (RREG32(RADEON_DAC_CNTL2) & RADEON_DAC2_CMP_OUT_B)
* for locking on FreeBSD.
*/
if (cmdbuf->size) {
- kcmd_addr = kmalloc(cmdbuf->size * 8, GFP_KERNEL);
+ kcmd_addr = kmalloc_array(cmdbuf->size, 8, GFP_KERNEL);
if (kcmd_addr == NULL)
return -ENOMEM;
cmdbuf->vb_addr = kvb_addr;
}
if (cmdbuf->nbox) {
- kbox_addr = kmalloc(cmdbuf->nbox * sizeof(struct drm_clip_rect),
- GFP_KERNEL);
+ kbox_addr = kmalloc_array(cmdbuf->nbox, sizeof(struct drm_clip_rect),
+ GFP_KERNEL);
if (kbox_addr == NULL) {
ret = -ENOMEM;
goto done;
pci_restore_state(pdev);
i2c_dw_init(i2c);
- i2c_dw_enable(i2c);
return 0;
}
{
struct ib_port_attr attr;
char *speed = "";
- int rate = -1; /* in deci-Gb/sec */
+ int rate; /* in deci-Gb/sec */
ssize_t ret;
ret = ib_query_port(p->ibdev, p->port_num, &attr);
return ret;
switch (attr.active_speed) {
- case IB_SPEED_SDR:
- rate = 25;
- break;
case IB_SPEED_DDR:
speed = " DDR";
rate = 50;
speed = " EDR";
rate = 250;
break;
+ case IB_SPEED_SDR:
+ default: /* default to SDR for invalid rates */
+ rate = 25;
+ break;
}
rate *= ib_width_enum_to_int(attr.active_width);
if (out_mad->data[15] & 0x1)
props->active_speed = IB_SPEED_FDR10;
}
+
+ /* Avoid wrong speed value returned by FW if the IB link is down. */
+ if (props->state == IB_PORT_DOWN)
+ props->active_speed = IB_SPEED_SDR;
+
out:
kfree(in_mad);
kfree(out_mad);
srq_attr.attr.max_wr = sdev->srq_size;
srq_attr.attr.max_sge = 1;
srq_attr.attr.srq_limit = 0;
+ srq_attr.srq_type = IB_SRQT_BASIC;
sdev->srq = ib_create_srq(sdev->pd, &srq_attr);
if (IS_ERR(sdev->srq))
input_dev = input_allocate_device();
if (!onkey || !input_dev) {
dev_err(&pdev->dev, "Failed to allocate memory\n");
- return -ENOMEM;
+ error = -ENOMEM;
+ goto err_free_mem;
}
onkey->input = input_dev;
unsigned char *packet = psmouse->packet;
input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
- input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
input_mt_report_pointer_emulation(dev, true);
input_sync(dev);
}
if (elantech_set_range(psmouse, &x_min, &y_min, &x_max, &y_max, &width))
return -1;
+ __set_bit(INPUT_PROP_POINTER, dev->propbit);
__set_bit(EV_KEY, dev->evbit);
__set_bit(EV_ABS, dev->evbit);
__clear_bit(EV_REL, dev->evbit);
*/
psmouse_warn(psmouse, "couldn't query resolution data.\n");
}
-
+ /* v4 is clickpad, with only one button. */
+ __set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
+ __clear_bit(BTN_RIGHT, dev->keybit);
__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
/* For X to recognize me as touchpad. */
input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
*/
static int elantech_reconnect(struct psmouse *psmouse)
{
+ psmouse_reset(psmouse);
+
if (elantech_detect(psmouse, 0))
return -1;
if (!etd)
return -ENOMEM;
+ psmouse_reset(psmouse);
+
etd->parity[0] = 1;
for (i = 1; i < 256; i++)
etd->parity[i] = etd->parity[i & (i - 1)] ^ 1;
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/input-polldev.h>
+#include <linux/gpio.h>
#include <linux/gpio_mouse.h>
-#include <asm/gpio.h>
/*
* Timer function which is run every scan_ms ms when the device is opened.
}
} else {
/* SFAC packet */
+ if ((packet[0] & (FSP_PB0_LBTN|FSP_PB0_PHY_BTN)) ==
+ FSP_PB0_LBTN) {
+ /* On-pad click in SFAC mode should be handled
+ * by userspace. On-pad clicks in MFMC mode
+ * are real clickpad clicks, and not ignored.
+ */
+ packet[0] &= ~FSP_PB0_LBTN;
+ }
/* no multi-finger information */
ad->last_mt_fgr = 0;
return 0;
if (trackpoint_read(&psmouse->ps2dev, TP_EXT_BTN, &button_info)) {
- printk(KERN_WARNING "trackpoint.c: failed to get extended button data\n");
+ psmouse_warn(psmouse, "failed to get extended button data\n");
button_info = 0;
}
error = sysfs_create_group(&ps2dev->serio->dev.kobj, &trackpoint_attr_group);
if (error) {
- printk(KERN_ERR
- "trackpoint.c: failed to create sysfs attributes, error: %d\n",
- error);
+ psmouse_err(psmouse,
+ "failed to create sysfs attributes, error: %d\n",
+ error);
kfree(psmouse->private);
psmouse->private = NULL;
return -1;
}
- printk(KERN_INFO "IBM TrackPoint firmware: 0x%02x, buttons: %d/%d\n",
- firmware_id, (button_info & 0xf0) >> 4, button_info & 0x0f);
+ psmouse_info(psmouse,
+ "IBM TrackPoint firmware: 0x%02x, buttons: %d/%d\n",
+ firmware_id,
+ (button_info & 0xf0) >> 4, button_info & 0x0f);
return 0;
}
/*
- * drivers/input/touchscreen/tps6507x_ts.c
- *
* Touchscreen driver for the tps6507x chip.
*
* Copyright (c) 2009 RidgeRun (todd.fischer@ridgerun.com)
MODULE_AUTHOR("Todd Fischer <todd.fischer@ridgerun.com>");
MODULE_DESCRIPTION("TPS6507x - TouchScreen driver");
MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:tps6507x-tsc");
+MODULE_ALIAS("platform:tps6507x-ts");
struct cardstate *cs = tty->driver_data;
if (!cs) { /* happens if we didn't find cs in open */
- printk(KERN_DEBUG "%s: no cardstate\n", __func__);
+ gig_dbg(DEBUG_IF, "%s: no cardstate", __func__);
return;
}
bitmap->events_cleared = bitmap->mddev->events;
sb->events_cleared = cpu_to_le64(bitmap->mddev->events);
- bitmap->flags |= BITMAP_HOSTENDIAN;
- sb->version = cpu_to_le32(BITMAP_MAJOR_HOSTENDIAN);
-
kunmap_atomic(sb);
return 0;
* re-add of a missing device */
start = mddev->recovery_cp;
+ mutex_lock(&mddev->bitmap_info.mutex);
err = bitmap_init_from_disk(bitmap, start);
+ mutex_unlock(&mddev->bitmap_info.mutex);
if (err)
goto out;
struct r1conf *conf = mddev->private;
int primary;
int i;
+ int vcnt;
for (primary = 0; primary < conf->raid_disks * 2; primary++)
if (r1_bio->bios[primary]->bi_end_io == end_sync_read &&
break;
}
r1_bio->read_disk = primary;
+ vcnt = (r1_bio->sectors + PAGE_SIZE / 512 - 1) >> (PAGE_SHIFT - 9);
for (i = 0; i < conf->raid_disks * 2; i++) {
int j;
- int vcnt = r1_bio->sectors >> (PAGE_SHIFT- 9);
struct bio *pbio = r1_bio->bios[primary];
struct bio *sbio = r1_bio->bios[i];
int size;
struct r10conf *conf = mddev->private;
int i, first;
struct bio *tbio, *fbio;
+ int vcnt;
atomic_set(&r10_bio->remaining, 1);
first = i;
fbio = r10_bio->devs[i].bio;
+ vcnt = (r10_bio->sectors + (PAGE_SIZE >> 9) - 1) >> (PAGE_SHIFT - 9);
/* now find blocks with errors */
for (i=0 ; i < conf->copies ; i++) {
int j, d;
- int vcnt = r10_bio->sectors >> (PAGE_SHIFT-9);
tbio = r10_bio->devs[i].bio;
*/
for (i = 0; i < conf->copies; i++) {
int j, d;
- int vcnt = r10_bio->sectors >> (PAGE_SHIFT-9);
tbio = r10_bio->devs[i].repl_bio;
if (!tbio || !tbio->bi_end_io)
static void dvb_frontend_wakeup(struct dvb_frontend *fe);
static int dtv_get_frontend(struct dvb_frontend *fe,
struct dvb_frontend_parameters *p_out);
+static int dtv_property_legacy_params_sync(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *p);
static bool has_get_frontend(struct dvb_frontend *fe)
{
- return fe->ops.get_frontend;
+ return fe->ops.get_frontend != NULL;
}
/*
fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN;
fepriv->delay = HZ / 2;
}
+ dtv_property_legacy_params_sync(fe, &fepriv->parameters_out);
fe->ops.read_status(fe, &s);
if (s != fepriv->status) {
dvb_frontend_add_event(fe, s); /* update event list */
if (dvb_frontend_check_parameters(fe) < 0)
return -EINVAL;
+ /*
+ * Initialize output parameters to match the values given by
+ * the user. FE_SET_FRONTEND triggers an initial frontend event
+ * with status = 0, which copies output parameters to userspace.
+ */
+ dtv_property_legacy_params_sync(fe, &fepriv->parameters_out);
+
/*
* Be sure that the bandwidth will be filled for all
* non-satellite systems, as tuners need to know what
static u32 it913x_query(struct usb_device *udev, u8 pro)
{
- int ret;
+ int ret, i;
u8 data[4];
- ret = it913x_io(udev, READ_LONG, pro, CMD_DEMOD_READ,
- 0x1222, 0, &data[0], 3);
+ u8 ver;
+
+ for (i = 0; i < 5; i++) {
+ ret = it913x_io(udev, READ_LONG, pro, CMD_DEMOD_READ,
+ 0x1222, 0, &data[0], 3);
+ ver = data[0];
+ if (ver > 0 && ver < 3)
+ break;
+ msleep(100);
+ }
- it913x_config.chip_ver = data[0];
+ if (ver < 1 || ver > 2) {
+ info("Failed to identify chip version applying 1");
+ it913x_config.chip_ver = 0x1;
+ it913x_config.chip_type = 0x9135;
+ return 0;
+ }
+
+ it913x_config.chip_ver = ver;
it913x_config.chip_type = (u16)(data[2] << 8) + data[1];
info("Chip Version=%02x Chip Type=%04x", it913x_config.chip_ver,
if ((packet_size > min_pkt) || (i == fw->size)) {
fw_data = (u8 *)(fw->data + pos);
pos += packet_size;
- if (packet_size > 0)
- ret |= it913x_io(udev, WRITE_DATA,
+ if (packet_size > 0) {
+ ret = it913x_io(udev, WRITE_DATA,
DEV_0, CMD_SCATTER_WRITE, 0,
0, fw_data, packet_size);
+ if (ret < 0)
+ break;
+ }
udelay(1000);
}
}
i++;
}
- ret |= it913x_io(udev, WRITE_CMD, DEV_0, CMD_BOOT, 0, 0, NULL, 0);
-
- msleep(100);
-
if (ret < 0)
- info("FRM Firmware Download Failed (%04x)" , ret);
+ info("FRM Firmware Download Failed (%d)" , ret);
else
info("FRM Firmware Download Completed - Resetting Device");
- ret |= it913x_return_status(udev);
+ msleep(30);
+
+ ret = it913x_io(udev, WRITE_CMD, DEV_0, CMD_BOOT, 0, 0, NULL, 0);
+ if (ret < 0)
+ info("FRM Device not responding to reboot");
+
+ ret = it913x_return_status(udev);
+ if (ret == 0) {
+ info("FRM Failed to reboot device");
+ return -ENODEV;
+ }
msleep(30);
- ret |= it913x_wr_reg(udev, DEV_0, I2C_CLK, I2C_CLK_400);
+ ret = it913x_wr_reg(udev, DEV_0, I2C_CLK, I2C_CLK_400);
+
+ msleep(30);
/* Tuner function */
if (it913x_config.dual_mode)
MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
MODULE_DESCRIPTION("it913x USB 2 Driver");
-MODULE_VERSION("1.27");
+MODULE_VERSION("1.28");
MODULE_LICENSE("GPL");
IVTV_DEBUG_IOCTL("AUDIO_CHANNEL_SELECT\n");
if (iarg > AUDIO_STEREO_SWAPPED)
return -EINVAL;
- return v4l2_ctrl_s_ctrl(itv->ctrl_audio_playback, iarg);
+ return v4l2_ctrl_s_ctrl(itv->ctrl_audio_playback, iarg + 1);
case AUDIO_BILINGUAL_CHANNEL_SELECT:
IVTV_DEBUG_IOCTL("AUDIO_BILINGUAL_CHANNEL_SELECT\n");
if (iarg > AUDIO_STEREO_SWAPPED)
return -EINVAL;
- return v4l2_ctrl_s_ctrl(itv->ctrl_audio_multilingual_playback, iarg);
+ return v4l2_ctrl_s_ctrl(itv->ctrl_audio_multilingual_playback, iarg + 1);
default:
return -EINVAL;
spin_unlock_irqrestore(&stream->clock.lock, flags);
}
-static int uvc_video_clock_init(struct uvc_streaming *stream)
+static void uvc_video_clock_reset(struct uvc_streaming *stream)
{
struct uvc_clock *clock = &stream->clock;
- spin_lock_init(&clock->lock);
clock->head = 0;
clock->count = 0;
- clock->size = 32;
clock->last_sof = -1;
clock->sof_offset = -1;
+}
+
+static int uvc_video_clock_init(struct uvc_streaming *stream)
+{
+ struct uvc_clock *clock = &stream->clock;
+
+ spin_lock_init(&clock->lock);
+ clock->size = 32;
clock->samples = kmalloc(clock->size * sizeof(*clock->samples),
GFP_KERNEL);
if (clock->samples == NULL)
return -ENOMEM;
+ uvc_video_clock_reset(stream);
+
return 0;
}
if (free_buffers)
uvc_free_urb_buffers(stream);
-
- uvc_video_clock_cleanup(stream);
}
/*
uvc_video_stats_start(stream);
- ret = uvc_video_clock_init(stream);
- if (ret < 0)
- return ret;
-
if (intf->num_altsetting > 1) {
struct usb_host_endpoint *best_ep = NULL;
unsigned int best_psize = 3 * 1024;
stream->frozen = 0;
+ uvc_video_clock_reset(stream);
+
ret = uvc_commit_video(stream, &stream->ctrl);
if (ret < 0) {
uvc_queue_enable(&stream->queue, 0);
uvc_uninit_video(stream, 1);
usb_set_interface(stream->dev->udev, stream->intfnum, 0);
uvc_queue_enable(&stream->queue, 0);
+ uvc_video_clock_cleanup(stream);
return 0;
}
- ret = uvc_queue_enable(&stream->queue, 1);
+ ret = uvc_video_clock_init(stream);
if (ret < 0)
return ret;
+ ret = uvc_queue_enable(&stream->queue, 1);
+ if (ret < 0)
+ goto error_queue;
+
/* Commit the streaming parameters. */
ret = uvc_commit_video(stream, &stream->ctrl);
- if (ret < 0) {
- uvc_queue_enable(&stream->queue, 0);
- return ret;
- }
+ if (ret < 0)
+ goto error_commit;
ret = uvc_init_video(stream, GFP_KERNEL);
- if (ret < 0) {
- usb_set_interface(stream->dev->udev, stream->intfnum, 0);
- uvc_queue_enable(&stream->queue, 0);
- }
+ if (ret < 0)
+ goto error_video;
+
+ return 0;
+
+error_video:
+ usb_set_interface(stream->dev->udev, stream->intfnum, 0);
+error_commit:
+ uvc_queue_enable(&stream->queue, 0);
+error_queue:
+ uvc_video_clock_cleanup(stream);
return ret;
}
}
if (mtd->type == MTD_ABSENT) {
- put_mtd_device(mtd);
ret = -ENODEV;
- goto out;
+ goto out1;
}
mtd_ino = iget_locked(mnt->mnt_sb, devnum);
if (!mtd_ino) {
- put_mtd_device(mtd);
ret = -ENOMEM;
- goto out;
+ goto out1;
}
if (mtd_ino->i_state & I_NEW) {
mtd_ino->i_private = mtd;
/* You can't open it RW if it's not a writeable device */
if ((file->f_mode & FMODE_WRITE) && !(mtd->flags & MTD_WRITEABLE)) {
- iput(mtd_ino);
- put_mtd_device(mtd);
ret = -EACCES;
- goto out;
+ goto out2;
}
mfi = kzalloc(sizeof(*mfi), GFP_KERNEL);
if (!mfi) {
- iput(mtd_ino);
- put_mtd_device(mtd);
ret = -ENOMEM;
- goto out;
+ goto out2;
}
mfi->ino = mtd_ino;
mfi->mtd = mtd;
file->private_data = mfi;
+ mutex_unlock(&mtd_mutex);
+ return 0;
+out2:
+ iput(mtd_ino);
+out1:
+ put_mtd_device(mtd);
out:
mutex_unlock(&mtd_mutex);
simple_release_fs(&mnt, &count);
if (--sc->ps_usecount != 0)
goto unlock;
- if (sc->ps_flags & PS_WAIT_FOR_TX_ACK)
- goto unlock;
-
- if (sc->ps_idle)
+ if (sc->ps_idle && (sc->ps_flags & PS_WAIT_FOR_TX_ACK))
mode = ATH9K_PM_FULL_SLEEP;
else if (sc->ps_enabled &&
!(sc->ps_flags & (PS_WAIT_FOR_BEACON |
PS_WAIT_FOR_CAB |
- PS_WAIT_FOR_PSPOLL_DATA)))
+ PS_WAIT_FOR_PSPOLL_DATA |
+ PS_WAIT_FOR_TX_ACK)))
mode = ATH9K_PM_NETWORK_SLEEP;
else
goto unlock;
set_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags);
- /*
- * Register the extra components.
- */
- rt2x00rfkill_register(rt2x00dev);
-
return 0;
}
rt2x00link_register(rt2x00dev);
rt2x00leds_register(rt2x00dev);
rt2x00debug_register(rt2x00dev);
+ rt2x00rfkill_register(rt2x00dev);
return 0;
__le16 fc = hdr->frame_control;
txrate = ieee80211_get_tx_rate(hw, info);
- tcb_desc->hw_rate = txrate->hw_value;
+ if (txrate)
+ tcb_desc->hw_rate = txrate->hw_value;
+ else
+ tcb_desc->hw_rate = 0;
if (ieee80211_is_data(fc)) {
/*
memset(&tcb_desc, 0, sizeof(struct rtl_tcb_desc));
ring = &rtlpci->tx_ring[BEACON_QUEUE];
pskb = __skb_dequeue(&ring->queue);
- if (pskb)
+ if (pskb) {
+ struct rtl_tx_desc *entry = &ring->desc[ring->idx];
+ pci_unmap_single(rtlpci->pdev, rtlpriv->cfg->ops->get_desc(
+ (u8 *) entry, true, HW_DESC_TXBUFF_ADDR),
+ pskb->len, PCI_DMA_TODEVICE);
kfree_skb(pskb);
+ }
/*NB: the beacon data buffer must be 32-bit aligned. */
pskb = ieee80211_beacon_get(hw, mac->vif);
u8 tid;
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
- static int header_print;
rtlpriv->dm.dm_initialgain_enable = true;
rtlpriv->dm.dm_flag = 0;
for (tid = 0; tid < 8; tid++)
skb_queue_head_init(&rtlpriv->mac80211.skb_waitq[tid]);
- /* Only load firmware for first MAC */
- if (header_print)
- return 0;
-
/* for firmware buf */
rtlpriv->rtlhal.pfirmware = vzalloc(0x8000);
if (!rtlpriv->rtlhal.pfirmware) {
rtlpriv->max_fw_size = 0x8000;
pr_info("Driver for Realtek RTL8192DE WLAN interface\n");
pr_info("Loading firmware file %s\n", rtlpriv->cfg->fw_name);
- header_print++;
/* request fw */
err = request_firmware_nowait(THIS_MODULE, 1, rtlpriv->cfg->fw_name,
return status;
}
-static u32 _usb_read_sync(struct usb_device *udev, u32 addr, u16 len)
+static u32 _usb_read_sync(struct rtl_priv *rtlpriv, u32 addr, u16 len)
{
+ struct device *dev = rtlpriv->io.dev;
+ struct usb_device *udev = to_usb_device(dev);
u8 request;
u16 wvalue;
u16 index;
- u32 *data;
- u32 ret;
+ __le32 *data = &rtlpriv->usb_data[rtlpriv->usb_data_index];
- data = kmalloc(sizeof(u32), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
request = REALTEK_USB_VENQT_CMD_REQ;
index = REALTEK_USB_VENQT_CMD_IDX; /* n/a */
wvalue = (u16)addr;
_usbctrl_vendorreq_sync_read(udev, request, wvalue, index, data, len);
- ret = le32_to_cpu(*data);
- kfree(data);
- return ret;
+ if (++rtlpriv->usb_data_index >= RTL_USB_MAX_RX_COUNT)
+ rtlpriv->usb_data_index = 0;
+ return le32_to_cpu(*data);
}
static u8 _usb_read8_sync(struct rtl_priv *rtlpriv, u32 addr)
{
- struct device *dev = rtlpriv->io.dev;
-
- return (u8)_usb_read_sync(to_usb_device(dev), addr, 1);
+ return (u8)_usb_read_sync(rtlpriv, addr, 1);
}
static u16 _usb_read16_sync(struct rtl_priv *rtlpriv, u32 addr)
{
- struct device *dev = rtlpriv->io.dev;
-
- return (u16)_usb_read_sync(to_usb_device(dev), addr, 2);
+ return (u16)_usb_read_sync(rtlpriv, addr, 2);
}
static u32 _usb_read32_sync(struct rtl_priv *rtlpriv, u32 addr)
{
- struct device *dev = rtlpriv->io.dev;
-
- return _usb_read_sync(to_usb_device(dev), addr, 4);
+ return _usb_read_sync(rtlpriv, addr, 4);
}
static void _usb_write_async(struct usb_device *udev, u32 addr, u32 val,
return -ENOMEM;
}
rtlpriv = hw->priv;
+ rtlpriv->usb_data = kzalloc(RTL_USB_MAX_RX_COUNT * sizeof(u32),
+ GFP_KERNEL);
+ if (!rtlpriv->usb_data)
+ return -ENOMEM;
+ rtlpriv->usb_data_index = 0;
init_completion(&rtlpriv->firmware_loading_complete);
SET_IEEE80211_DEV(hw, &intf->dev);
udev = interface_to_usbdev(intf);
/* rtl_deinit_rfkill(hw); */
rtl_usb_deinit(hw);
rtl_deinit_core(hw);
+ kfree(rtlpriv->usb_data);
rtlpriv->cfg->ops->deinit_sw_leds(hw);
rtlpriv->cfg->ops->deinit_sw_vars(hw);
_rtl_usb_io_handler_release(hw);
#define QOS_QUEUE_NUM 4
#define RTL_MAC80211_NUM_QUEUE 5
#define REALTEK_USB_VENQT_MAX_BUF_SIZE 254
-
+#define RTL_USB_MAX_RX_COUNT 100
#define QBSS_LOAD_SIZE 5
#define MAX_WMMELE_LENGTH 64
interface or hardware */
unsigned long status;
+ /* data buffer pointer for USB reads */
+ __le32 *usb_data;
+ int usb_data_index;
+
/*This must be the last item so
that it points to the data allocated
beyond this structure like:
{ /* end */ }
};
-static struct platform_driver anatop_regulator = {
+static struct platform_driver anatop_regulator_driver = {
.driver = {
.name = "anatop_regulator",
.owner = THIS_MODULE,
static int __init anatop_regulator_init(void)
{
- return platform_driver_register(&anatop_regulator);
+ return platform_driver_register(&anatop_regulator_driver);
}
postcore_initcall(anatop_regulator_init);
static void __exit anatop_regulator_exit(void)
{
- platform_driver_unregister(&anatop_regulator);
+ platform_driver_unregister(&anatop_regulator_driver);
}
module_exit(anatop_regulator_exit);
.name = "rtc-efi",
.owner = THIS_MODULE,
},
- .probe = efi_rtc_probe,
.remove = __exit_p(efi_rtc_remove),
};
dev_dbg(&adev->dev, "revision = 0x%01x\n", ldata->hw_revision);
/* Enable the clockwatch on ST Variants */
- if ((ldata->hw_designer == AMBA_VENDOR_ST) &&
- (ldata->hw_revision > 1))
+ if (ldata->hw_designer == AMBA_VENDOR_ST)
writel(readl(ldata->base + RTC_CR) | RTC_CR_CWEN,
ldata->base + RTC_CR);
static int __devinit r9701_probe(struct spi_device *spi)
{
struct rtc_device *rtc;
+ struct rtc_time dt;
unsigned char tmp;
int res;
return -ENODEV;
}
+ /*
+ * The device seems to be present. Now check if the registers
+ * contain invalid values. If so, try to write a default date:
+ * 2000/1/1 00:00:00
+ */
+ r9701_get_datetime(&spi->dev, &dt);
+ if (rtc_valid_tm(&dt)) {
+ dev_info(&spi->dev, "trying to repair invalid date/time\n");
+ dt.tm_sec = 0;
+ dt.tm_min = 0;
+ dt.tm_hour = 0;
+ dt.tm_mday = 1;
+ dt.tm_mon = 0;
+ dt.tm_year = 100;
+
+ if (r9701_set_datetime(&spi->dev, &dt)) {
+ dev_err(&spi->dev, "cannot repair RTC register\n");
+ return -ENODEV;
+ }
+ }
+
rtc = rtc_device_register("r9701",
&spi->dev, &r9701_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc))
TYPE_S3C64XX,
};
+struct s3c_rtc_drv_data {
+ int cpu_type;
+};
+
/* I have yet to find an S3C implementation with more than one
* of these rtc blocks in */
static inline int s3c_rtc_get_driver_data(struct platform_device *pdev)
{
#ifdef CONFIG_OF
+ struct s3c_rtc_drv_data *data;
if (pdev->dev.of_node) {
const struct of_device_id *match;
match = of_match_node(s3c_rtc_dt_match, pdev->dev.of_node);
- return match->data;
+ data = (struct s3c_rtc_drv_data *) match->data;
+ return data->cpu_type;
}
#endif
return platform_get_device_id(pdev)->driver_data;
#define s3c_rtc_resume NULL
#endif
+static struct s3c_rtc_drv_data s3c_rtc_drv_data_array[] = {
+ [TYPE_S3C2410] = { TYPE_S3C2410 },
+ [TYPE_S3C2416] = { TYPE_S3C2416 },
+ [TYPE_S3C2443] = { TYPE_S3C2443 },
+ [TYPE_S3C64XX] = { TYPE_S3C64XX },
+};
+
#ifdef CONFIG_OF
static const struct of_device_id s3c_rtc_dt_match[] = {
{
- .compatible = "samsung,s3c2410-rtc"
- .data = TYPE_S3C2410,
+ .compatible = "samsung,s3c2410-rtc",
+ .data = &s3c_rtc_drv_data_array[TYPE_S3C2410],
}, {
- .compatible = "samsung,s3c2416-rtc"
- .data = TYPE_S3C2416,
+ .compatible = "samsung,s3c2416-rtc",
+ .data = &s3c_rtc_drv_data_array[TYPE_S3C2416],
}, {
- .compatible = "samsung,s3c2443-rtc"
- .data = TYPE_S3C2443,
+ .compatible = "samsung,s3c2443-rtc",
+ .data = &s3c_rtc_drv_data_array[TYPE_S3C2443],
}, {
- .compatible = "samsung,s3c6410-rtc"
- .data = TYPE_S3C64XX,
+ .compatible = "samsung,s3c6410-rtc",
+ .data = &s3c_rtc_drv_data_array[TYPE_S3C64XX],
},
{},
};
#define BIT_RTC_CTRL_REG_TEST_MODE_M 0x10
#define BIT_RTC_CTRL_REG_SET_32_COUNTER_M 0x20
#define BIT_RTC_CTRL_REG_GET_TIME_M 0x40
+#define BIT_RTC_CTRL_REG_RTC_V_OPT 0x80
/* RTC_STATUS_REG bitfields */
#define BIT_RTC_STATUS_REG_RUN_M 0x02
unsigned char rtc_data[ALL_TIME_REGS + 1];
int ret;
u8 save_control;
+ u8 rtc_control;
ret = twl_rtc_read_u8(&save_control, REG_RTC_CTRL_REG);
- if (ret < 0)
+ if (ret < 0) {
+ dev_err(dev, "%s: reading CTRL_REG, error %d\n", __func__, ret);
return ret;
+ }
+ /* for twl6030/32 make sure BIT_RTC_CTRL_REG_GET_TIME_M is clear */
+ if (twl_class_is_6030()) {
+ if (save_control & BIT_RTC_CTRL_REG_GET_TIME_M) {
+ save_control &= ~BIT_RTC_CTRL_REG_GET_TIME_M;
+ ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
+ if (ret < 0) {
+ dev_err(dev, "%s clr GET_TIME, error %d\n",
+ __func__, ret);
+ return ret;
+ }
+ }
+ }
- save_control |= BIT_RTC_CTRL_REG_GET_TIME_M;
+ /* Copy RTC counting registers to static registers or latches */
+ rtc_control = save_control | BIT_RTC_CTRL_REG_GET_TIME_M;
- ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
- if (ret < 0)
+ /* for twl6030/32 enable read access to static shadowed registers */
+ if (twl_class_is_6030())
+ rtc_control |= BIT_RTC_CTRL_REG_RTC_V_OPT;
+
+ ret = twl_rtc_write_u8(rtc_control, REG_RTC_CTRL_REG);
+ if (ret < 0) {
+ dev_err(dev, "%s: writing CTRL_REG, error %d\n", __func__, ret);
return ret;
+ }
ret = twl_i2c_read(TWL_MODULE_RTC, rtc_data,
(rtc_reg_map[REG_SECONDS_REG]), ALL_TIME_REGS);
if (ret < 0) {
- dev_err(dev, "rtc_read_time error %d\n", ret);
+ dev_err(dev, "%s: reading data, error %d\n", __func__, ret);
return ret;
}
+ /* for twl6030 restore original state of rtc control register */
+ if (twl_class_is_6030()) {
+ ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
+ if (ret < 0) {
+ dev_err(dev, "%s: restore CTRL_REG, error %d\n",
+ __func__, ret);
+ return ret;
+ }
+ }
+
tm->tm_sec = bcd2bin(rtc_data[0]);
tm->tm_min = bcd2bin(rtc_data[1]);
tm->tm_hour = bcd2bin(rtc_data[2]);
dev_dbg(sdev, "Couldn't DMA map a %d bytes RX buffer\n",
rx_buf_count);
if (t->tx_buf)
- dma_unmap_single(NULL, t->tx_dma, t->len,
+ dma_unmap_single(&spi->dev, t->tx_dma, t->len,
DMA_TO_DEVICE);
return -ENOMEM;
}
if (spicfg->io_type == SPI_IO_TYPE_DMA) {
if (t->tx_buf)
- dma_unmap_single(NULL, t->tx_dma, t->len,
+ dma_unmap_single(&spi->dev, t->tx_dma, t->len,
DMA_TO_DEVICE);
- dma_unmap_single(NULL, t->rx_dma, rx_buf_count,
+ dma_unmap_single(&spi->dev, t->rx_dma, rx_buf_count,
DMA_FROM_DEVICE);
clear_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN);
static void fsl_spi_chipselect(struct spi_device *spi, int value)
{
struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master);
- struct fsl_spi_platform_data *pdata = spi->dev.parent->platform_data;
+ struct fsl_spi_platform_data *pdata;
bool pol = spi->mode & SPI_CS_HIGH;
struct spi_mpc8xxx_cs *cs = spi->controller_state;
+ pdata = spi->dev.parent->parent->platform_data;
+
if (value == BITBANG_CS_INACTIVE) {
if (pdata->cs_control)
pdata->cs_control(spi, !pol);
struct spi_bitbang bitbang;
struct completion xfer_done;
- void *base;
+ void __iomem *base;
int irq;
struct clk *clk;
unsigned long spi_clk;
}
ret = of_property_read_u32(np, "fsl,spi-num-chipselects", &num_cs);
- if (ret < 0)
- num_cs = mxc_platform_info->num_chipselect;
+ if (ret < 0) {
+ if (mxc_platform_info)
+ num_cs = mxc_platform_info->num_chipselect;
+ else
+ return ret;
+ }
master = spi_alloc_master(&pdev->dev,
sizeof(struct spi_imx_data) + sizeof(int) * num_cs);
for (i = 0; i < master->num_chipselect; i++) {
int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
- if (cs_gpio < 0)
+ if (cs_gpio < 0 && mxc_platform_info)
cs_gpio = mxc_platform_info->chipselect[i];
spi_imx->chipselect[i] = cs_gpio;
config ANDROID_PERSISTENT_RAM
bool
+ depends on HAVE_MEMBLOCK
select REED_SOLOMON
select REED_SOLOMON_ENC8
select REED_SOLOMON_DEC8
config ANDROID_RAM_CONSOLE
bool "Android RAM buffer console"
- depends on !S390 && !UML
+ depends on !S390 && !UML && HAVE_MEMBLOCK
select ANDROID_PERSISTENT_RAM
default n
};
static int lowmem_minfree_size = 4;
-static struct task_struct *lowmem_deathpending;
static unsigned long lowmem_deathpending_timeout;
#define lowmem_print(level, x...) \
printk(x); \
} while (0)
-static int
-task_notify_func(struct notifier_block *self, unsigned long val, void *data);
-
-static struct notifier_block task_nb = {
- .notifier_call = task_notify_func,
-};
-
-static int
-task_notify_func(struct notifier_block *self, unsigned long val, void *data)
-{
- struct task_struct *task = data;
-
- if (task == lowmem_deathpending)
- lowmem_deathpending = NULL;
-
- return NOTIFY_OK;
-}
-
static int lowmem_shrink(struct shrinker *s, struct shrink_control *sc)
{
struct task_struct *tsk;
int other_file = global_page_state(NR_FILE_PAGES) -
global_page_state(NR_SHMEM);
- /*
- * If we already have a death outstanding, then
- * bail out right away; indicating to vmscan
- * that we have nothing further to offer on
- * this pass.
- *
- * Note: Currently you need CONFIG_PROFILING
- * for this to work correctly.
- */
- if (lowmem_deathpending &&
- time_before_eq(jiffies, lowmem_deathpending_timeout))
- return 0;
-
if (lowmem_adj_size < array_size)
array_size = lowmem_adj_size;
if (lowmem_minfree_size < array_size)
if (!p)
continue;
+ if (test_tsk_thread_flag(p, TIF_MEMDIE) &&
+ time_before_eq(jiffies, lowmem_deathpending_timeout)) {
+ task_unlock(p);
+ rcu_read_unlock();
+ return 0;
+ }
oom_score_adj = p->signal->oom_score_adj;
if (oom_score_adj < min_score_adj) {
task_unlock(p);
lowmem_print(1, "send sigkill to %d (%s), adj %d, size %d\n",
selected->pid, selected->comm,
selected_oom_score_adj, selected_tasksize);
- /*
- * If CONFIG_PROFILING is off, then we don't want to stall
- * the killer by setting lowmem_deathpending.
- */
-#ifdef CONFIG_PROFILING
- lowmem_deathpending = selected;
lowmem_deathpending_timeout = jiffies + HZ;
-#endif
send_sig(SIGKILL, selected, 0);
+ set_tsk_thread_flag(selected, TIF_MEMDIE);
rem -= selected_tasksize;
}
lowmem_print(4, "lowmem_shrink %lu, %x, return %d\n",
static int __init lowmem_init(void)
{
- task_handoff_register(&task_nb);
register_shrinker(&lowmem_shrinker);
return 0;
}
static void __exit lowmem_exit(void)
{
unregister_shrinker(&lowmem_shrinker);
- task_handoff_unregister(&task_nb);
}
module_param_named(cost, lowmem_shrinker.seeks, int, S_IRUGO | S_IWUSR);
struct persistent_ram_zone *__persistent_ram_init(struct device *dev, bool ecc)
{
struct persistent_ram_zone *prz;
- int ret;
+ int ret = -ENOMEM;
prz = kzalloc(sizeof(struct persistent_ram_zone), GFP_KERNEL);
if (!prz) {
pr_err("persistent_ram: failed to allocate persistent ram zone\n");
- return ERR_PTR(-ENOMEM);
+ goto err;
}
INIT_LIST_HEAD(&prz->node);
ret = persistent_ram_buffer_init(dev_name(dev), prz);
if (ret) {
pr_err("persistent_ram: failed to initialize buffer\n");
- return ERR_PTR(ret);
+ goto err;
}
prz->ecc = ecc;
ret = persistent_ram_init_ecc(prz, prz->buffer_size);
if (ret)
- return ERR_PTR(ret);
+ goto err;
if (prz->buffer->sig == PERSISTENT_RAM_SIG) {
if (buffer_size(prz) > prz->buffer_size ||
atomic_set(&prz->buffer->size, 0);
return prz;
+err:
+ kfree(prz);
+ return ERR_PTR(ret);
}
struct persistent_ram_zone * __init
struct timed_gpio_platform_data *pdata = pdev->dev.platform_data;
struct timed_gpio *cur_gpio;
struct timed_gpio_data *gpio_data, *gpio_dat;
- int i, j, ret = 0;
+ int i, ret;
if (!pdata)
return -EBUSY;
gpio_dat->dev.get_time = gpio_get_time;
gpio_dat->dev.enable = gpio_enable;
ret = gpio_request(cur_gpio->gpio, cur_gpio->name);
- if (ret >= 0) {
- ret = timed_output_dev_register(&gpio_dat->dev);
- if (ret < 0)
- gpio_free(cur_gpio->gpio);
- }
+ if (ret < 0)
+ goto err_out;
+ ret = timed_output_dev_register(&gpio_dat->dev);
if (ret < 0) {
- for (j = 0; j < i; j++) {
- timed_output_dev_unregister(&gpio_data[i].dev);
- gpio_free(gpio_data[i].gpio);
- }
- kfree(gpio_data);
- return ret;
+ gpio_free(cur_gpio->gpio);
+ goto err_out;
}
gpio_dat->gpio = cur_gpio->gpio;
platform_set_drvdata(pdev, gpio_data);
return 0;
+
+err_out:
+ while (--i >= 0) {
+ timed_output_dev_unregister(&gpio_data[i].dev);
+ gpio_free(gpio_data[i].gpio);
+ }
+ kfree(gpio_data);
+
+ return ret;
}
static int timed_gpio_remove(struct platform_device *pdev)
ret = -ENODEV;
goto error_ret;
}
+ i++;
}
error_ret:
mutex_unlock(&iio_map_list_lock);
static int ak8975_write_data(struct i2c_client *client,
u8 reg, u8 val, u8 mask, u8 shift)
{
- struct ak8975_data *data = i2c_get_clientdata(client);
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct ak8975_data *data = iio_priv(indio_dev);
u8 regval;
int ret;
*/
static int ak8975_setup(struct i2c_client *client)
{
- struct ak8975_data *data = i2c_get_clientdata(client);
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct ak8975_data *data = iio_priv(indio_dev);
u8 device_id;
int ret;
goto exit_gpio;
}
data = iio_priv(indio_dev);
+ i2c_set_clientdata(client, indio_dev);
/* Perform some basic start-of-day setup of the device. */
err = ak8975_setup(client);
if (err < 0) {
goto exit_free_iio;
}
- i2c_set_clientdata(client, indio_dev);
data->client = client;
mutex_init(&data->lock);
data->eoc_irq = client->irq;
/* Called when we have found a new HMC5843. */
static void hmc5843_init_client(struct i2c_client *client)
{
- struct hmc5843_data *data = i2c_get_clientdata(client);
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct hmc5843_data *data = iio_priv(indio_dev);
+
hmc5843_set_meas_conf(client, data->meas_conf);
hmc5843_set_rate(client, data->rate);
hmc5843_configure(client, data->operating_mode);
int as102_fw_upload(struct as10x_bus_adapter_t *bus_adap)
{
int errno = -EFAULT;
- const struct firmware *firmware;
+ const struct firmware *firmware = NULL;
unsigned char *cmd_buf = NULL;
char *fw1, *fw2;
struct usb_device *dev = bus_adap->usb_dev;
static int pdev_probe(struct platform_device *device)
{
DBG("%s", device->name);
- if (platform_driver_register(&omap_dmm_driver))
- dev_err(&device->dev, "DMM registration failed\n");
-
return drm_platform_init(&omap_drm_driver, device);
}
static int __init omap_drm_init(void)
{
DBG("init");
+ if (platform_driver_register(&omap_dmm_driver)) {
+ /* we can continue on without DMM.. so not fatal */
+ dev_err(NULL, "DMM registration failed\n");
+ }
return platform_driver_register(&pdev);
}
- code review by USB developer community.
- testing with as many devices as possible.
-Please send any patches for this driver to Chris Kelly <ckelly@ozmodevices.com>
+Please send any patches for this driver to
+Rupesh Gujare <rgujare@ozmodevices.com>
+Chris Kelly <ckelly@ozmodevices.com>
and Greg Kroah-Hartman <gregkh@linuxfoundation.org>.
-# Dependency on CONFIG_BROKEN is because there is a commit dependency
-# on a cleancache naming change to be submitted by Konrad Wilk
-# a39c00ded70339603ffe1b0ffdf3ade85bcf009a "Merge branch 'stable/cleancache.v13'
-# into linux-next. Once this commit is present, BROKEN can be removed
config RAMSTER
bool "Cross-machine RAM capacity sharing, aka peer-to-peer tmem"
- depends on (CLEANCACHE || FRONTSWAP) && CONFIGFS_FS=y && !ZCACHE && !XVMALLOC && !HIGHMEM && BROKEN
+ depends on (CLEANCACHE || FRONTSWAP) && CONFIGFS_FS=y && !ZCACHE && !XVMALLOC && !HIGHMEM
select LZO_COMPRESS
select LZO_DECOMPRESS
default n
log_blk++;
- for (seg_no = 0; seg_no < sizeof(ms_start_idx)/2; seg_no++) {
+ for (seg_no = 0; seg_no < ARRAY_SIZE(ms_start_idx) - 1;
+ seg_no++) {
if (log_blk < ms_start_idx[seg_no+1])
break;
}
rtsx_init_chip(dev->chip);
+ /* set the supported max_lun and max_id for the scsi host
+ * NOTE: the minimal value of max_id is 1 */
+ host->max_id = 1;
+ host->max_lun = dev->chip->max_lun;
+
/* Start up our control thread */
th = kthread_run(rtsx_control_thread, dev, CR_DRIVER_NAME);
if (IS_ERR(th)) {
int sg_cnt, i, resid;
int err = 0;
long timeleft;
+ struct scatterlist *sg_ptr;
u32 val = TRIG_DMA;
if ((sg == NULL) || (num_sg <= 0) || !offset || !index)
sg_cnt = dma_map_sg(&(rtsx->pci->dev), sg, num_sg, dma_dir);
resid = size;
-
+ sg_ptr = sg;
chip->sgi = 0;
/* Usually the next entry will be @sg@ + 1, but if this sg element
* is part of a chained scatterlist, it could jump to the start of
* the proper sg
*/
for (i = 0; i < *index; i++)
- sg = sg_next(sg);
+ sg_ptr = sg_next(sg_ptr);
for (i = *index; i < sg_cnt; i++) {
dma_addr_t addr;
unsigned int len;
u8 option;
- addr = sg_dma_address(sg);
- len = sg_dma_len(sg);
+ addr = sg_dma_address(sg_ptr);
+ len = sg_dma_len(sg_ptr);
RTSX_DEBUGP("DMA addr: 0x%x, Len: 0x%x\n",
(unsigned int)addr, len);
if (!resid)
break;
- sg = sg_next(sg);
+ sg_ptr = sg_next(sg_ptr);
}
RTSX_DEBUGP("SG table count = %d\n", chip->sgi);
current->pid);
if (1 == test_bit(SEP_LEGACY_SENDMSG_DONE_OFFSET,
&call_status->status)) {
- dev_warn(&sep->pdev->dev,
+ dev_dbg(&sep->pdev->dev,
"[PID%d] dcb prep needed before send msg\n",
current->pid);
error = -EPROTO;
}
if (!arg) {
- dev_warn(&sep->pdev->dev,
+ dev_dbg(&sep->pdev->dev,
"[PID%d] dcb null arg\n", current->pid);
- error = EINVAL;
+ error = -EINVAL;
goto end_function;
}
static int vector_num;
static int level[PIO2_CARDS_MAX];
static int level_num;
-static const char *variant[PIO2_CARDS_MAX];
+static char *variant[PIO2_CARDS_MAX];
static int variant_num;
-static int loopback;
+static bool loopback;
static int pio2_match(struct vme_dev *);
static int __devinit pio2_probe(struct vme_dev *);
return (false);
}
+ if (uKeyLength > MAX_KEY_LEN)
+ return false;
+
pTable->KeyTable[MAX_KEY_TABLE-1].bInUse = true;
for(ii=0;ii<ETH_ALEN;ii++)
pTable->KeyTable[MAX_KEY_TABLE-1].abyBSSID[ii] = 0xFF;
result = -ENOMEM;
break;
}
- pNodeList = (PSNodeList)kmalloc(sizeof(SNodeList) + (sNodeList.uItem * sizeof(SNodeItem)), (int)GFP_ATOMIC);
+ pNodeList = kmalloc(sizeof(SNodeList) + (sNodeList.uItem * sizeof(SNodeItem)), (int)GFP_ATOMIC);
if (pNodeList == NULL) {
result = -ENOMEM;
break;
}
}
if (copy_to_user(pReq->data, pNodeList, sizeof(SNodeList) + (sNodeList.uItem * sizeof(SNodeItem)))) {
+ kfree(pNodeList);
result = -EFAULT;
break;
}
return (FALSE);
}
+ if (uKeyLength > MAX_KEY_LEN)
+ return false;
+
pTable->KeyTable[MAX_KEY_TABLE-1].bInUse = TRUE;
for (ii = 0; ii < ETH_ALEN; ii++)
pTable->KeyTable[MAX_KEY_TABLE-1].abyBSSID[ii] = 0xFF;
}
temp = xgifb_reg_get(pVBInfo->P3c4, 0x3B);
/* SR3B[7][3]MAA15 MAA11 (Power on Trapping) */
- if ((temp & 0x88) == 0x80)
+ if (((temp & 0x88) == 0x80) || ((temp & 0x88) == 0x08))
data = 0; /* DDR */
else
data = 1; /* DDRII */
pVBInfo->pXGINew_CR97 = &XG20_CR97;
if (ChipType == XG27) {
+ unsigned char temp;
pVBInfo->MCLKData
= (struct SiS_MCLKData *) XGI27New_MCLKData;
pVBInfo->CR40 = XGI27_cr41;
pVBInfo->pCRDE = XG27_CRDE;
pVBInfo->pSR40 = &XG27_SR40;
pVBInfo->pSR41 = &XG27_SR41;
+ pVBInfo->SR15 = XG27_SR13;
+ /*Z11m DDR*/
+ temp = xgifb_reg_get(pVBInfo->P3c4, 0x3B);
+ /* SR3B[7][3]MAA15 MAA11 (Power on Trapping) */
+ if (((temp & 0x88) == 0x80) || ((temp & 0x88) == 0x08))
+ pVBInfo->pXGINew_CR97 = &Z11m_CR97;
}
if (ChipType >= XG20) {
{0x5c, 0x23, 0x01, 166}
};
+static unsigned char XG27_SR13[4][8] = {
+ {0x35, 0x45, 0xb1, 0x00, 0x00, 0x00, 0x00, 0x00}, /* SR13 */
+ {0x41, 0x51, 0x5c, 0x00, 0x00, 0x00, 0x00, 0x00}, /* SR14 */
+ {0x32, 0x32, 0x42, 0x00, 0x00, 0x00, 0x00, 0x00}, /* SR18 */
+ {0x03, 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00} /* SR1B */
+};
+
static unsigned char XGI340_SR13[4][8] = {
{0x35, 0x45, 0xb1, 0x00, 0x00, 0x00, 0x00, 0x00}, /* SR13 */
{0x41, 0x51, 0x5c, 0x00, 0x00, 0x00, 0x00, 0x00}, /* SR14 */
{0x20, 0x40, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00}, /* 0 CR41 */
{0xC4, 0x40, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00}, /* 1 CR8A */
{0xC4, 0x40, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00}, /* 2 CR8B */
- {0xB5, 0x13, 0xa4, 0x00, 0x00, 0x00, 0x00, 0x00}, /* 3 CR40[7],
+ {0xB3, 0x13, 0xa4, 0x00, 0x00, 0x00, 0x00, 0x00}, /* 3 CR40[7],
CR99[2:0],
CR45[3:0]*/
{0xf0, 0xf5, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00}, /* 4 CR59 */
static unsigned char XG27_SR40 = 0x04 ;
static unsigned char XG27_SR41 = 0x00 ;
+static unsigned char Z11m_CR97 = 0x80 ;
+
static struct XGI330_VCLKDataStruct XGI_VCLKData[] = {
/* SR2B,SR2C,SR2D */
{0x1B, 0xE1, 25}, /* 00 (25.175MHz) */
return off + obj_idx * class_size;
}
+static void reset_page(struct page *page)
+{
+ clear_bit(PG_private, &page->flags);
+ clear_bit(PG_private_2, &page->flags);
+ set_page_private(page, 0);
+ page->mapping = NULL;
+ page->freelist = NULL;
+ reset_page_mapcount(page);
+}
+
static void free_zspage(struct page *first_page)
{
- struct page *nextp, *tmp;
+ struct page *nextp, *tmp, *head_extra;
BUG_ON(!is_first_page(first_page));
BUG_ON(first_page->inuse);
- nextp = (struct page *)page_private(first_page);
+ head_extra = (struct page *)page_private(first_page);
- clear_bit(PG_private, &first_page->flags);
- clear_bit(PG_private_2, &first_page->flags);
- set_page_private(first_page, 0);
- first_page->mapping = NULL;
- first_page->freelist = NULL;
- reset_page_mapcount(first_page);
+ reset_page(first_page);
__free_page(first_page);
/* zspage with only 1 system page */
- if (!nextp)
+ if (!head_extra)
return;
- list_for_each_entry_safe(nextp, tmp, &nextp->lru, lru) {
+ list_for_each_entry_safe(nextp, tmp, &head_extra->lru, lru) {
list_del(&nextp->lru);
- clear_bit(PG_private_2, &nextp->flags);
- nextp->index = 0;
+ reset_page(nextp);
__free_page(nextp);
}
+ reset_page(head_extra);
+ __free_page(head_extra);
}
/* Initialize a newly allocated zspage */
do {
struct uart_8250_port *up;
struct uart_port *port;
- bool skip;
up = list_entry(l, struct uart_8250_port, list);
port = &up->port;
- skip = pass_counter && up->port.flags & UPF_IIR_ONCE;
- if (!skip && port->handle_irq(port)) {
+ if (port->handle_irq(port)) {
handled = 1;
end = NULL;
} else if (end == NULL)
spin_unlock_irqrestore(&port->lock, flags);
/*
- * If the interrupt is not reasserted, setup a timer to
- * kick the UART on a regular basis.
+ * If the interrupt is not reasserted, or we otherwise
+ * don't trust the iir, setup a timer to kick the UART
+ * on a regular basis.
*/
- if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) {
+ if ((!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) ||
+ up->port.flags & UPF_BUG_THRE) {
up->bugs |= UART_BUG_THRE;
pr_debug("ttyS%d - using backup timer\n",
serial_index(port));
const struct pciserial_board *board,
struct uart_port *port, int idx)
{
- port->flags |= UPF_IIR_ONCE;
+ port->flags |= UPF_BUG_THRE;
return skip_tx_en_setup(priv, board, port, idx);
}
return pci_default_setup(priv, board, port, idx);
}
-static int try_enable_msi(struct pci_dev *dev)
-{
- /* use msi if available, but fallback to legacy otherwise */
- pci_enable_msi(dev);
- return 0;
-}
-
-static void disable_msi(struct pci_dev *dev)
-{
- pci_disable_msi(dev);
-}
-
#define PCI_VENDOR_ID_SBSMODULARIO 0x124B
#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B
#define PCI_DEVICE_ID_OCTPRO 0x0001
.device = PCI_DEVICE_ID_INTEL_PATSBURG_KT,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .init = try_enable_msi,
.setup = kt_serial_setup,
- .exit = disable_msi,
},
/*
* ITE
config SERIAL_OMAP_CONSOLE
bool "Console on OMAP serial port"
- depends on SERIAL_OMAP
+ depends on SERIAL_OMAP=y
select SERIAL_CORE_CONSOLE
help
Select this option if you would like to use omap serial port as
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res_mem)
port->mapbase = res_mem->start;
- else if (platp->mapbase)
+ else if (platp)
port->mapbase = platp->mapbase;
else
return -EINVAL;
res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (res_irq)
port->irq = res_irq->start;
- else if (platp->irq)
+ else if (platp)
port->irq = platp->irq;
/* Check platform data first so we can override device node data */
goto unmap;
}
- /* Ensure interrupts from this UART are masked and cleared */
- writew(0, uap->port.membase + UART011_IMSC);
- writew(0xffff, uap->port.membase + UART011_ICR);
-
uap->vendor = vendor;
uap->lcrh_rx = vendor->lcrh_rx;
uap->lcrh_tx = vendor->lcrh_tx;
uap->port.line = i;
pl011_dma_probe(uap);
+ /* Ensure interrupts from this UART are masked and cleared */
+ writew(0, uap->port.membase + UART011_IMSC);
+ writew(0xffff, uap->port.membase + UART011_ICR);
+
snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev));
amba_ports[i] = uap;
{
UART_PUT_CR(port, ATMEL_US_RSTSTA); /* reset status and receiver */
+ UART_PUT_CR(port, ATMEL_US_RXEN);
+
if (atmel_use_dma_rx(port)) {
/* enable PDC controller */
UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
*/
static void atmel_stop_rx(struct uart_port *port)
{
+ UART_PUT_CR(port, ATMEL_US_RXDIS);
+
if (atmel_use_dma_rx(port)) {
/* disable PDC receive */
UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS);
return -ENODEV;
}
- if (!request_mem_region(mem->start, resource_size(mem),
+ if (!devm_request_mem_region(&pdev->dev, mem->start, resource_size(mem),
pdev->dev.driver->name)) {
dev_err(&pdev->dev, "memory region already claimed\n");
return -EBUSY;
}
dma_rx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
- if (!dma_rx) {
- ret = -EINVAL;
- goto err;
- }
+ if (!dma_rx)
+ return -ENXIO;
dma_tx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
- if (!dma_tx) {
- ret = -EINVAL;
- goto err;
- }
+ if (!dma_tx)
+ return -ENXIO;
+
+ up = devm_kzalloc(&pdev->dev, sizeof(*up), GFP_KERNEL);
+ if (!up)
+ return -ENOMEM;
- up = kzalloc(sizeof(*up), GFP_KERNEL);
- if (up == NULL) {
- ret = -ENOMEM;
- goto do_release_region;
- }
up->pdev = pdev;
up->port.dev = &pdev->dev;
up->port.type = PORT_OMAP;
dev_err(&pdev->dev, "failed to get alias/pdev id, errno %d\n",
up->port.line);
ret = -ENODEV;
- goto err;
+ goto err_port_line;
}
sprintf(up->name, "OMAP UART%d", up->port.line);
up->port.mapbase = mem->start;
- up->port.membase = ioremap(mem->start, resource_size(mem));
+ up->port.membase = devm_ioremap(&pdev->dev, mem->start,
+ resource_size(mem));
if (!up->port.membase) {
dev_err(&pdev->dev, "can't ioremap UART\n");
ret = -ENOMEM;
- goto err;
+ goto err_ioremap;
}
up->port.flags = omap_up_info->flags;
ret = uart_add_one_port(&serial_omap_reg, &up->port);
if (ret != 0)
- goto do_release_region;
+ goto err_add_port;
pm_runtime_put(&pdev->dev);
platform_set_drvdata(pdev, up);
return 0;
-err:
+
+err_add_port:
+ pm_runtime_put(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+err_ioremap:
+err_port_line:
dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n",
pdev->id, __func__, ret);
-do_release_region:
- release_mem_region(mem->start, resource_size(mem));
return ret;
}
pm_runtime_disable(&up->pdev->dev);
uart_remove_one_port(&serial_omap_reg, &up->port);
pm_qos_remove_request(&up->pm_qos_request);
-
- kfree(up);
}
platform_set_drvdata(dev, NULL);
#define CMITC_UARTCLK 192000000 /* 192.0000 MHz */
#define FRI2_64_UARTCLK 64000000 /* 64.0000 MHz */
#define FRI2_48_UARTCLK 48000000 /* 48.0000 MHz */
+#define NTC1_UARTCLK 64000000 /* 64.0000 MHz */
struct pch_uart_buffer {
unsigned char *buf;
if (cmp && strstr(cmp, "Fish River Island II"))
return FRI2_48_UARTCLK;
+ /* Kontron COMe-mTT10 (nanoETXexpress-TT) */
+ cmp = dmi_get_system_info(DMI_BOARD_NAME);
+ if (cmp && (strstr(cmp, "COMe-mTT") ||
+ strstr(cmp, "nanoETXexpress-TT")))
+ return NTC1_UARTCLK;
+
return DEFAULT_UARTCLK;
}
}
pci_enable_msi(pdev);
+ pci_set_master(pdev);
iobase = pci_resource_start(pdev, 0);
mapbase = pci_resource_start(pdev, 1);
ucon &= ucon_mask;
wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
+ wr_regl(port, S3C2410_ULCON, cfg->ulcon);
/* reset both fifos */
wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
gotoxy(vc, vc->vc_x, vc->vc_y);
csi_J(vc, 0);
update_screen(vc);
- pr_info("Console: %s %s %dx%d",
+ pr_info("Console: %s %s %dx%d\n",
vc->vc_can_do_color ? "colour" : "mono",
display_desc, vc->vc_cols, vc->vc_rows);
printable = 1;
- printk("\n");
console_unlock();
# USB device configuration
#
-menuconfig USB_SUPPORT
- bool "USB support"
- depends on HAS_IOMEM
- default y
- ---help---
- This option adds core support for Universal Serial Bus (USB).
- You will also need drivers from the following menu to make use of it.
-
# many non-PCI SOC chips embed OHCI
config USB_ARCH_HAS_OHCI
boolean
boolean
default PCI
+menuconfig USB_SUPPORT
+ bool "USB support"
+ depends on HAS_IOMEM
+ default y
+ ---help---
+ This option adds core support for Universal Serial Bus (USB).
+ You will also need drivers from the following menu to make use of it.
+
if USB_SUPPORT
config USB_COMMON
if (status == 0) {
status = usb_suspend_device(udev, msg);
- /* Again, ignore errors during system sleep transitions */
- if (!PMSG_IS_AUTO(msg))
+ /*
+ * Ignore errors from non-root-hub devices during
+ * system sleep transitions. For the most part,
+ * these devices should go to low power anyway when
+ * the entire bus is suspended.
+ */
+ if (udev->parent && !PMSG_IS_AUTO(msg))
status = 0;
}
if (status == 0) {
usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
hcd->state = HC_STATE_SUSPENDED;
+
+ /* Did we race with a root-hub wakeup event? */
+ if (rhdev->do_remote_wakeup) {
+ char buffer[6];
+
+ status = hcd->driver->hub_status_data(hcd, buffer);
+ if (status != 0) {
+ dev_dbg(&rhdev->dev, "suspend raced with wakeup event\n");
+ hcd_bus_resume(rhdev, PMSG_AUTO_RESUME);
+ status = -EBUSY;
+ }
+ }
} else {
spin_lock_irq(&hcd_root_hub_lock);
if (!HCD_DEAD(hcd)) {
if (retval)
goto fail;
+ /*
+ * Some superspeed devices have finished the link training process
+ * and attached to a superspeed hub port, but the device descriptor
+ * got from those devices show they aren't superspeed devices. Warm
+ * reset the port attached by the devices can fix them.
+ */
+ if ((udev->speed == USB_SPEED_SUPER) &&
+ (le16_to_cpu(udev->descriptor.bcdUSB) < 0x0300)) {
+ dev_err(&udev->dev, "got a wrong device descriptor, "
+ "warm reset device\n");
+ hub_port_reset(hub, port1, udev,
+ HUB_BH_RESET_TIME, true);
+ retval = -EINVAL;
+ goto fail;
+ }
+
if (udev->descriptor.bMaxPacketSize0 == 0xff ||
udev->speed == USB_SPEED_SUPER)
i = 512;
retval = usb_unlink_urb(io->urbs [i]);
if (retval != -EINPROGRESS &&
retval != -ENODEV &&
- retval != -EBUSY)
+ retval != -EBUSY &&
+ retval != -EIDRM)
dev_err(&io->dev->dev,
"%s, unlink --> %d\n",
__func__, retval);
}
spin_lock(&io->lock);
}
- urb->dev = NULL;
/* on the last completion, signal usb_sg_wait() */
io->bytes += urb->actual_length;
case -ENXIO: /* hc didn't queue this one */
case -EAGAIN:
case -ENOMEM:
- io->urbs[i]->dev = NULL;
retval = 0;
yield();
break;
/* fail any uncompleted urbs */
default:
- io->urbs[i]->dev = NULL;
io->urbs[i]->status = retval;
dev_dbg(&io->dev->dev, "%s, submit --> %d\n",
__func__, retval);
if (!io->urbs [i]->dev)
continue;
retval = usb_unlink_urb(io->urbs [i]);
- if (retval != -EINPROGRESS && retval != -EBUSY)
+ if (retval != -EINPROGRESS
+ && retval != -ENODEV
+ && retval != -EBUSY
+ && retval != -EIDRM)
dev_warn(&io->dev->dev, "%s, unlink --> %d\n",
__func__, retval);
}
* never submitted, or it was unlinked before, or the hardware is already
* finished with it), even if the completion handler has not yet run.
*
+ * The URB must not be deallocated while this routine is running. In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
* Unlinking and Endpoint Queues:
*
* [The behaviors and guarantees described below do not apply to virtual
* with error -EPERM. Thus even if the URB's completion handler always
* tries to resubmit, it will not succeed and the URB will become idle.
*
+ * The URB must not be deallocated while this routine is running. In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
* This routine may not be used in an interrupt context (such as a bottom
* half or a completion handler), or when holding a spinlock, or in other
* situations where the caller can't schedule().
* with error -EPERM. Thus even if the URB's completion handler always
* tries to resubmit, it will not succeed and the URB will become idle.
*
+ * The URB must not be deallocated while this routine is running. In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
* This routine may not be used in an interrupt context (such as a bottom
* half or a completion handler), or when holding a spinlock, or in other
* situations where the caller can't schedule().
DBG (dev, "%s %d\n", __func__, dev->state);
/* dev->state must prevent interference */
-restart:
spin_lock_irq (&dev->lock);
while (!list_empty(&dev->epfiles)) {
struct ep_data *ep;
if (ehci->debug)
dbgp_external_startup();
+ ehci->port_c_suspend = ehci->suspended_ports =
+ ehci->resuming_ports = 0;
return retval;
}
* like usb_port_resume() does.
*/
ehci->reset_done[i] = jiffies + msecs_to_jiffies(25);
+ set_bit(i, &ehci->resuming_ports);
ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
}
* remote wakeup, we must fail the suspend.
*/
if (hcd->self.root_hub->do_remote_wakeup) {
- port = HCS_N_PORTS(ehci->hcs_params);
- while (port--) {
- if (ehci->reset_done[port] != 0) {
- spin_unlock_irq(&ehci->lock);
- ehci_dbg(ehci, "suspend failed because "
- "port %d is resuming\n",
- port + 1);
- return -EBUSY;
- }
+ if (ehci->resuming_ports) {
+ spin_unlock_irq(&ehci->lock);
+ ehci_dbg(ehci, "suspend failed because a port is resuming\n");
+ return -EBUSY;
}
}
ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
- u32 temp, status = 0;
+ u32 temp, status;
u32 mask;
int ports, i, retval = 1;
unsigned long flags;
u32 ppcd = 0;
- /* if !USB_SUSPEND, root hub timers won't get shut down ... */
- if (ehci->rh_state != EHCI_RH_RUNNING)
- return 0;
-
/* init status to no-changes */
buf [0] = 0;
ports = HCS_N_PORTS (ehci->hcs_params);
retval++;
}
+ /* Inform the core about resumes-in-progress by returning
+ * a non-zero value even if there are no status changes.
+ */
+ status = ehci->resuming_ports;
+
/* Some boards (mostly VIA?) report bogus overcurrent indications,
* causing massive log spam unless we completely ignore them. It
* may be relevant that VIA VT8235 controllers, where PORT_POWER is
ehci_writel(ehci,
temp & ~(PORT_RWC_BITS | PORT_RESUME),
status_reg);
+ clear_bit(wIndex, &ehci->resuming_ports);
retval = handshake(ehci, status_reg,
PORT_RESUME, 0, 2000 /* 2msec */);
if (retval != 0) {
ehci->reset_done[wIndex])) {
status |= USB_PORT_STAT_C_RESET << 16;
ehci->reset_done [wIndex] = 0;
+ clear_bit(wIndex, &ehci->resuming_ports);
/* force reset to complete */
ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET),
ehci_readl(ehci, status_reg));
}
- if (!(temp & (PORT_RESUME|PORT_RESET)))
+ if (!(temp & (PORT_RESUME|PORT_RESET))) {
ehci->reset_done[wIndex] = 0;
+ clear_bit(wIndex, &ehci->resuming_ports);
+ }
/* transfer dedicated ports to the companion hc */
if ((temp & PORT_CONNECT) &&
status |= USB_PORT_STAT_SUSPEND;
} else if (test_bit(wIndex, &ehci->suspended_ports)) {
clear_bit(wIndex, &ehci->suspended_ports);
+ clear_bit(wIndex, &ehci->resuming_ports);
ehci->reset_done[wIndex] = 0;
if (temp & PORT_PE)
set_bit(wIndex, &ehci->port_c_suspend);
temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
/* start resume signalling */
ehci_writel(ehci, temp | PORT_RESUME, status_reg);
+ set_bit(wIndex-1, &ehci->resuming_ports);
spin_unlock_irqrestore(&ehci->lock, flags);
msleep(20);
pr_err("%s: timeout waiting for SUSPEND\n", __func__);
ehci->reset_done[wIndex-1] = 0;
+ clear_bit(wIndex-1, &ehci->resuming_ports);
tegra->port_resuming = 1;
goto done;
the change-suspend feature turned on */
unsigned long suspended_ports; /* which ports are
suspended */
+ unsigned long resuming_ports; /* which ports have
+ started to resume */
/* per-HC memory pools (could be per-bus, but ...) */
struct dma_pool *qh_pool; /* qh per active urb */
}
}
- /* Disable any BIOS SMIs */
- writel(XHCI_LEGACY_DISABLE_SMI,
- base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+ val = readl(base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+ /* Mask off (turn off) any enabled SMIs */
+ val &= XHCI_LEGACY_DISABLE_SMI;
+ /* Mask all SMI events bits, RW1C */
+ val |= XHCI_LEGACY_SMI_EVENTS;
+ /* Disable any BIOS SMIs and clear all SMI events*/
+ writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
if (usb_is_intel_switchable_xhci(pdev))
usb_enable_xhci_ports(pdev);
status = get_hub_status_data(uhci, buf);
switch (uhci->rh_state) {
- case UHCI_RH_SUSPENDING:
case UHCI_RH_SUSPENDED:
/* if port change, ask to be resumed */
- if (status || uhci->resuming_ports)
+ if (status || uhci->resuming_ports) {
+ status = 1;
usb_hcd_resume_root_hub(hcd);
+ }
break;
case UHCI_RH_AUTO_STOPPED:
xhci_dbg(xhci, " Event Interrupts %s\n",
(temp & CMD_EIE) ? "enabled " : "disabled");
xhci_dbg(xhci, " Host System Error Interrupts %s\n",
- (temp & CMD_EIE) ? "enabled " : "disabled");
+ (temp & CMD_HSEIE) ? "enabled " : "disabled");
xhci_dbg(xhci, " HC has %sfinished light reset\n",
(temp & CMD_LRESET) ? "not " : "");
}
/* USB Legacy Support Control and Status Register - section 7.1.2 */
/* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
#define XHCI_LEGACY_CONTROL_OFFSET (0x04)
-/* bits 1:2, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
-#define XHCI_LEGACY_DISABLE_SMI ((0x3 << 1) + (0xff << 5) + (0x7 << 17))
+/* bits 1:3, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
+#define XHCI_LEGACY_DISABLE_SMI ((0x7 << 1) + (0xff << 5) + (0x7 << 17))
+#define XHCI_LEGACY_SMI_EVENTS (0x7 << 29)
/* USB 2.0 xHCI 0.96 L1C capability - section 7.2.2.1.3.2 */
#define XHCI_L1C (1 << 16)
int i;
/* Free the Event Ring Segment Table and the actual Event Ring */
- if (xhci->ir_set) {
- xhci_writel(xhci, 0, &xhci->ir_set->erst_size);
- xhci_write_64(xhci, 0, &xhci->ir_set->erst_base);
- xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue);
- }
size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
if (xhci->erst.entries)
dma_free_coherent(&pdev->dev, size,
xhci->event_ring = NULL;
xhci_dbg(xhci, "Freed event ring\n");
- xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring);
if (xhci->cmd_ring)
xhci_ring_free(xhci, xhci->cmd_ring);
xhci->cmd_ring = NULL;
xhci->medium_streams_pool = NULL;
xhci_dbg(xhci, "Freed medium stream array pool\n");
- xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr);
if (xhci->dcbaa)
dma_free_coherent(&pdev->dev, sizeof(*xhci->dcbaa),
xhci->dcbaa, xhci->dcbaa->dma);
fail:
xhci_warn(xhci, "Couldn't initialize memory\n");
+ xhci_halt(xhci);
+ xhci_reset(xhci);
xhci_mem_cleanup(xhci);
return -ENOMEM;
}
xhci->quirks |= XHCI_RESET_ON_RESUME;
xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
}
+ if (pdev->vendor == PCI_VENDOR_ID_VIA)
+ xhci->quirks |= XHCI_RESET_ON_RESUME;
}
/* called during probe() after chip reset completes */
return pci_register_driver(&xhci_pci_driver);
}
-void __exit xhci_unregister_pci(void)
+void xhci_unregister_pci(void)
{
pci_unregister_driver(&xhci_pci_driver);
}
u32 irq_pending;
/* Acknowledge the PCI interrupt */
irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
- irq_pending |= 0x3;
+ irq_pending |= IMAN_IP;
xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending);
}
urb->dev->speed == USB_SPEED_FULL)
urb->interval /= 8;
}
- return xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index);
+ return xhci_queue_bulk_tx(xhci, mem_flags, urb, slot_id, ep_index);
}
/*
}
ep_ring->num_trbs_free_temp = ep_ring->num_trbs_free;
- return xhci_queue_isoc_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index);
+ return xhci_queue_isoc_tx(xhci, mem_flags, urb, slot_id, ep_index);
}
/**** Command Ring Operations ****/
STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
if (!ret)
xhci->xhc_state |= XHCI_STATE_HALTED;
+ else
+ xhci_warn(xhci, "Host not halted after %u microseconds.\n",
+ XHCI_MAX_HALT_USEC);
return ret;
}
xhci->s3.dev_nt = xhci_readl(xhci, &xhci->op_regs->dev_notification);
xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
xhci->s3.config_reg = xhci_readl(xhci, &xhci->op_regs->config_reg);
- xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
- xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control);
xhci->s3.erst_size = xhci_readl(xhci, &xhci->ir_set->erst_size);
xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base);
xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control);
}
static void xhci_restore_registers(struct xhci_hcd *xhci)
xhci_writel(xhci, xhci->s3.dev_nt, &xhci->op_regs->dev_notification);
xhci_write_64(xhci, xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr);
xhci_writel(xhci, xhci->s3.config_reg, &xhci->op_regs->config_reg);
- xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending);
- xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control);
xhci_writel(xhci, xhci->s3.erst_size, &xhci->ir_set->erst_size);
xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base);
+ xhci_write_64(xhci, xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue);
+ xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending);
+ xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control);
}
static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci)
#define CMD_PM_INDEX (1 << 11)
/* bits 12:31 are reserved (and should be preserved on writes). */
+/* IMAN - Interrupt Management Register */
+#define IMAN_IP (1 << 1)
+#define IMAN_IE (1 << 0)
+
/* USBSTS - USB status - status bitmasks */
/* HC not running - set to 1 when run/stop bit is cleared. */
#define STS_HALT XHCI_STS_HALT
retval = -ENODEV;
goto exit;
}
- if (port->dev_state != PORT_REGISTERING)
- goto exit;
driver = port->serial->type;
if (driver->port_probe) {
if (!port)
return -ENODEV;
- if (port->dev_state != PORT_UNREGISTERING)
- return retval;
-
device_remove_file(&port->dev, &dev_attr_port_number);
driver = port->serial->type;
unsigned long last_dtr_rts; /* saved modem control outputs */
struct async_icount icount;
wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
- char prev_status, diff_status; /* Used for TIOCMIWAIT */
+ char prev_status; /* Used for TIOCMIWAIT */
+ bool dev_gone; /* Used to abort TIOCMIWAIT */
char transmit_empty; /* If transmitter is empty or not */
struct usb_serial_port *port;
__u16 interface; /* FT2232C, FT2232H or FT4232H port interface
init_waitqueue_head(&priv->delta_msr_wait);
priv->flags = ASYNC_LOW_LATENCY;
+ priv->dev_gone = false;
if (quirk && quirk->port_probe)
quirk->port_probe(priv);
dbg("%s", __func__);
+ priv->dev_gone = true;
+ wake_up_interruptible_all(&priv->delta_msr_wait);
+
remove_sysfs_attrs(port);
kref_put(&priv->kref, ftdi_sio_priv_release);
N.B. packet may be processed more than once, but differences
are only processed once. */
status = packet[0] & FTDI_STATUS_B0_MASK;
- if (status & FTDI_RS0_CTS)
- priv->icount.cts++;
- if (status & FTDI_RS0_DSR)
- priv->icount.dsr++;
- if (status & FTDI_RS0_RI)
- priv->icount.rng++;
- if (status & FTDI_RS0_RLSD)
- priv->icount.dcd++;
if (status != priv->prev_status) {
- priv->diff_status |= status ^ priv->prev_status;
- wake_up_interruptible(&priv->delta_msr_wait);
+ char diff_status = status ^ priv->prev_status;
+
+ if (diff_status & FTDI_RS0_CTS)
+ priv->icount.cts++;
+ if (diff_status & FTDI_RS0_DSR)
+ priv->icount.dsr++;
+ if (diff_status & FTDI_RS0_RI)
+ priv->icount.rng++;
+ if (diff_status & FTDI_RS0_RLSD)
+ priv->icount.dcd++;
+
+ wake_up_interruptible_all(&priv->delta_msr_wait);
priv->prev_status = status;
}
*/
case TIOCMIWAIT:
cprev = priv->icount;
- while (1) {
+ while (!priv->dev_gone) {
interruptible_sleep_on(&priv->delta_msr_wait);
/* see if a signal did it */
if (signal_pending(current))
return -ERESTARTSYS;
cnow = priv->icount;
- if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
- cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
- return -EIO; /* no change => error */
if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
}
cprev = cnow;
}
- /* not reached */
+ return -EIO;
break;
case TIOCSERGETLSR:
return get_lsr_info(port, (struct serial_struct __user *)arg);
/* Product information. */
#define FOCUS_VENDOR_ID 0x0C2E
-#define FOCUS_PRODUCT_ID 0x0720
-#define FOCUS_PRODUCT_ID_UNI 0x0710
+#define FOCUS_PRODUCT_ID_BI 0x0720
+#define FOCUS_PRODUCT_ID_UNI 0x0700
#define METROUSB_SET_REQUEST_TYPE 0x40
#define METROUSB_SET_MODEM_CTRL_REQUEST 10
/* Device table list. */
static struct usb_device_id id_table[] = {
- { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID) },
+ { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_BI) },
{ USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_UNI) },
{ }, /* Terminating entry. */
};
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED3) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED4) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED5) },
control = priv->line_control;
if ((cflag & CBAUD) == B0)
priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
- else
+ else if ((old_termios->c_cflag & CBAUD) == B0)
priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
if (control != priv->line_control) {
control = priv->line_control;
{ USB_DEVICE(0x1199, 0x6856) }, /* Sierra Wireless AirCard 881 U */
{ USB_DEVICE(0x1199, 0x6859) }, /* Sierra Wireless AirCard 885 E */
{ USB_DEVICE(0x1199, 0x685A) }, /* Sierra Wireless AirCard 885 E */
+ { USB_DEVICE(0x1199, 0x68A2) }, /* Sierra Wireless MC7710 */
/* Sierra Wireless C885 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)},
/* Sierra Wireless C888, Air Card 501, USB 303, USB 304 */
serial->attached = 1;
}
+ /* Avoid race with tty_open and serial_install by setting the
+ * disconnected flag and not clearing it until all ports have been
+ * registered.
+ */
+ serial->disconnected = 1;
+
if (get_free_serial(serial, num_ports, &minor) == NULL) {
dev_err(&interface->dev, "No more free serial devices\n");
goto probe_error;
port = serial->port[i];
dev_set_name(&port->dev, "ttyUSB%d", port->number);
dbg ("%s - registering %s", __func__, dev_name(&port->dev));
- port->dev_state = PORT_REGISTERING;
device_enable_async_suspend(&port->dev);
retval = device_add(&port->dev);
- if (retval) {
+ if (retval)
dev_err(&port->dev, "Error registering port device, "
"continuing\n");
- port->dev_state = PORT_UNREGISTERED;
- } else {
- port->dev_state = PORT_REGISTERED;
- }
}
+ serial->disconnected = 0;
+
usb_serial_console_init(debug, minor);
exit:
}
kill_traffic(port);
cancel_work_sync(&port->work);
- if (port->dev_state == PORT_REGISTERED) {
-
- /* Make sure the port is bound so that the
- * driver's port_remove method is called.
- */
- if (!port->dev.driver) {
- int rc;
-
- port->dev.driver =
- &serial->type->driver;
- rc = device_bind_driver(&port->dev);
- }
- port->dev_state = PORT_UNREGISTERING;
+ if (device_is_registered(&port->dev))
device_del(&port->dev);
- port->dev_state = PORT_UNREGISTERED;
- }
}
}
serial->type->disconnect(serial);
#undef COMPLIANT_DEV
#undef USUAL_DEV
+#ifdef CONFIG_LOCKDEP
+
+static struct lock_class_key us_interface_key[USB_MAXINTERFACES];
+
+static void us_set_lock_class(struct mutex *mutex,
+ struct usb_interface *intf)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct usb_host_config *config = udev->actconfig;
+ int i;
+
+ for (i = 0; i < config->desc.bNumInterfaces; i++) {
+ if (config->interface[i] == intf)
+ break;
+ }
+
+ BUG_ON(i == config->desc.bNumInterfaces);
+
+ lockdep_set_class(mutex, &us_interface_key[i]);
+}
+
+#else
+
+static void us_set_lock_class(struct mutex *mutex,
+ struct usb_interface *intf)
+{
+}
+
+#endif
#ifdef CONFIG_PM /* Minimal support for suspend and resume */
*pus = us = host_to_us(host);
memset(us, 0, sizeof(struct us_data));
mutex_init(&(us->dev_mutex));
+ us_set_lock_class(&us->dev_mutex, intf);
init_completion(&us->cmnd_ready);
init_completion(&(us->notify));
init_waitqueue_head(&us->delay_wait);
config GFS2_FS
tristate "GFS2 file system support"
depends on (64BIT || LBDAF)
- select DLM if GFS2_FS_LOCKING_DLM
- select CONFIGFS_FS if GFS2_FS_LOCKING_DLM
- select SYSFS if GFS2_FS_LOCKING_DLM
- select IP_SCTP if DLM_SCTP
select FS_POSIX_ACL
select CRC32
select QUOTACTL
config GFS2_FS_LOCKING_DLM
bool "GFS2 DLM locking"
- depends on (GFS2_FS!=n) && NET && INET && (IPV6 || IPV6=n) && HOTPLUG
+ depends on (GFS2_FS!=n) && NET && INET && (IPV6 || IPV6=n) && \
+ HOTPLUG && DLM && CONFIGFS_FS && SYSFS
help
Multiple node locking module for GFS2
if (inode == sdp->sd_rindex) {
adjust_fs_space(inode);
- ip->i_gh.gh_flags |= GL_NOCACHE;
+ sdp->sd_rindex_uptodate = 0;
}
brelse(dibh);
if (inode == sdp->sd_rindex) {
adjust_fs_space(inode);
- ip->i_gh.gh_flags |= GL_NOCACHE;
+ sdp->sd_rindex_uptodate = 0;
}
brelse(dibh);
int metadata;
unsigned int revokes = 0;
int x;
- int error = 0;
+ int error;
+
+ error = gfs2_rindex_update(sdp);
+ if (error)
+ return error;
if (!*top)
sm->sm_first = 0;
unsigned int x, size = len * sizeof(u64);
int error;
+ error = gfs2_rindex_update(sdp);
+ if (error)
+ return error;
+
memset(&rlist, 0, sizeof(struct gfs2_rgrp_list));
ht = kzalloc(size, GFP_NOFS);
struct buffer_head *bh;
struct gfs2_holder ghs[3];
struct gfs2_rgrpd *rgd;
- int error = -EROFS;
+ int error;
+
+ error = gfs2_rindex_update(sdp);
+ if (error)
+ return error;
+
+ error = -EROFS;
gfs2_holder_init(dip->i_gl, LM_ST_EXCLUSIVE, 0, ghs);
gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + 1);
return 0;
}
+ error = gfs2_rindex_update(sdp);
+ if (error)
+ return error;
+
if (odip != ndip) {
error = gfs2_glock_nq_init(sdp->sd_rename_gl, LM_ST_EXCLUSIVE,
0, &r_gh);
error = alloc_required;
if (error < 0)
goto out_gunlock;
- error = 0;
if (alloc_required) {
struct gfs2_qadata *qa = gfs2_qadata_get(ndip);
struct rb_node *n, *next;
struct gfs2_rgrpd *cur;
- if (gfs2_rindex_update(sdp))
- return NULL;
-
spin_lock(&sdp->sd_rindex_spin);
n = sdp->sd_rindex_tree.rb_node;
while (n) {
return 0;
error = 0; /* someone else read in the rgrp; free it and ignore it */
+ gfs2_glock_put(rgd->rd_gl);
fail:
kfree(rgd->rd_bits);
} else if (copy_from_user(&r, argp, sizeof(r)))
return -EFAULT;
+ ret = gfs2_rindex_update(sdp);
+ if (ret)
+ return ret;
+
rgd = gfs2_blk2rgrpd(sdp, r.start, 0);
rgd_end = gfs2_blk2rgrpd(sdp, r.start + r.len, 0);
unsigned int x;
int error;
+ error = gfs2_rindex_update(sdp);
+ if (error)
+ return error;
+
if (GFS2_EA_IS_STUFFED(ea))
return 0;
unsigned int x;
int error;
+ error = gfs2_rindex_update(sdp);
+ if (error)
+ return error;
+
memset(&rlist, 0, sizeof(struct gfs2_rgrp_list));
error = gfs2_meta_read(ip->i_gl, ip->i_eattr, DIO_WAIT, &indbh);
struct gfs2_holder gh;
int error;
+ error = gfs2_rindex_update(sdp);
+ if (error)
+ return error;
+
rgd = gfs2_blk2rgrpd(sdp, ip->i_eattr, 1);
if (!rgd) {
gfs2_consist_inode(ip);
return 0;
out:
d_genocide(root);
+ shrink_dcache_parent(root);
dput(root);
return -ENOMEM;
}
#ifndef arch_irq_stat
#define arch_irq_stat() 0
#endif
-#ifndef arch_idle_time
-#define arch_idle_time(cpu) 0
-#endif
+
+#ifdef arch_idle_time
+
+static cputime64_t get_idle_time(int cpu)
+{
+ cputime64_t idle;
+
+ idle = kcpustat_cpu(cpu).cpustat[CPUTIME_IDLE];
+ if (cpu_online(cpu) && !nr_iowait_cpu(cpu))
+ idle += arch_idle_time(cpu);
+ return idle;
+}
+
+static cputime64_t get_iowait_time(int cpu)
+{
+ cputime64_t iowait;
+
+ iowait = kcpustat_cpu(cpu).cpustat[CPUTIME_IOWAIT];
+ if (cpu_online(cpu) && nr_iowait_cpu(cpu))
+ iowait += arch_idle_time(cpu);
+ return iowait;
+}
+
+#else
static u64 get_idle_time(int cpu)
{
u64 idle, idle_time = get_cpu_idle_time_us(cpu, NULL);
- if (idle_time == -1ULL) {
+ if (idle_time == -1ULL)
/* !NO_HZ so we can rely on cpustat.idle */
idle = kcpustat_cpu(cpu).cpustat[CPUTIME_IDLE];
- idle += arch_idle_time(cpu);
- } else
+ else
idle = usecs_to_cputime64(idle_time);
return idle;
return iowait;
}
+#endif
+
static int show_stat(struct seq_file *p, void *v)
{
int i, j;
else
parent_sd = &sysfs_root;
+ if (!parent_sd)
+ return -ENOENT;
+
if (sysfs_ns_type(parent_sd))
ns = kobj->ktype->namespace(kobj);
type = sysfs_read_ns_type(kobj);
dup_name = sd->s_name;
sd->s_name = new_name;
- sd->s_hash = sysfs_name_hash(sd->s_ns, sd->s_name);
}
/* Move to the appropriate place in the appropriate directories rbtree. */
sysfs_get(new_parent_sd);
sysfs_put(sd->s_parent);
sd->s_ns = new_ns;
+ sd->s_hash = sysfs_name_hash(sd->s_ns, sd->s_name);
sd->s_parent = new_parent_sd;
sysfs_link_sibling(sd);
/* Updates may happen before the object has been instantiated */
if (unlikely(update && !kobj->sd))
return -EINVAL;
-
+ if (!grp->attrs) {
+ WARN(1, "sysfs: attrs not set by subsystem for group: %s/%s\n",
+ kobj->name, grp->name ? "" : grp->name);
+ return -EINVAL;
+ }
if (grp->name) {
error = sysfs_create_subdir(kobj, grp->name, &sd);
if (error)
struct drm_exynos_vidi_connection {
unsigned int connection;
unsigned int extensions;
- uint64_t *edid;
+ uint64_t edid;
};
struct drm_exynos_plane_set_zpos {
/* memory type definitions. */
enum e_drm_exynos_gem_mem_type {
/* Physically Non-Continuous memory. */
- EXYNOS_BO_NONCONTIG = 1 << 0
+ EXYNOS_BO_NONCONTIG = 1 << 0,
+ EXYNOS_BO_MASK = EXYNOS_BO_NONCONTIG
};
#define DRM_EXYNOS_GEM_CREATE 0x00
#ifndef _SSP_PL022_H
#define _SSP_PL022_H
+#include <linux/types.h>
+
/**
* whether SSP is in loopback mode or not
*/
void dma_async_device_unregister(struct dma_device *device);
void dma_run_dependencies(struct dma_async_tx_descriptor *tx);
struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type);
+struct dma_chan *net_dma_find_channel(void);
#define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y)
/* --- Helper iov-locking functions --- */
d->state_use_accessors &= ~IRQD_IRQ_INPROGRESS;
}
+static inline irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
+{
+ return d->hwirq;
+}
+
/**
* struct irq_chip - hardware interrupt chip descriptor
*
/* Number of irqs reserved for a legacy isa controller */
#define NUM_ISA_INTERRUPTS 16
-/* This type is the placeholder for a hardware interrupt number. It has to
- * be big enough to enclose whatever representation is used by a given
- * platform.
- */
-typedef unsigned long irq_hw_number_t;
-
/**
* struct irq_domain_ops - Methods for irq_domain objects
* @match: Match an interrupt controller device node to a host, returns
unsigned int size;
unsigned int *revmap;
} linear;
+ struct {
+ unsigned int max_irq;
+ } nomap;
struct radix_tree_root tree;
} revmap_data;
const struct irq_domain_ops *ops;
const struct irq_domain_ops *ops,
void *host_data);
struct irq_domain *irq_domain_add_nomap(struct device_node *of_node,
+ unsigned int max_irq,
const struct irq_domain_ops *ops,
void *host_data);
struct irq_domain *irq_domain_add_tree(struct device_node *of_node,
extern struct irq_domain *irq_find_host(struct device_node *node);
extern void irq_set_default_host(struct irq_domain *host);
-extern void irq_set_virq_count(unsigned int count);
static inline struct irq_domain *irq_domain_add_legacy_isa(
struct device_node *of_node,
}
extern struct irq_domain *irq_find_host(struct device_node *node);
extern void irq_set_default_host(struct irq_domain *host);
-extern void irq_set_virq_count(unsigned int count);
extern unsigned int irq_create_mapping(struct irq_domain *host,
#include <generated/autoconf.h>
/*
- * Helper macros to use CONFIG_ options in C expressions. Note that
+ * Helper macros to use CONFIG_ options in C/CPP expressions. Note that
* these only work with boolean and tristate options.
*/
+/*
+ * Getting something that works in C and CPP for an arg that may or may
+ * not be defined is tricky. Here, if we have "#define CONFIG_BOOGER 1"
+ * we match on the placeholder define, insert the "0," for arg1 and generate
+ * the triplet (0, 1, 0). Then the last step cherry picks the 2nd arg (a one).
+ * When CONFIG_BOOGER is not defined, we generate a (... 1, 0) pair, and when
+ * the last step cherry picks the 2nd arg, we get a zero.
+ */
+#define __ARG_PLACEHOLDER_1 0,
+#define config_enabled(cfg) _config_enabled(cfg)
+#define _config_enabled(value) __config_enabled(__ARG_PLACEHOLDER_##value)
+#define __config_enabled(arg1_or_junk) ___config_enabled(arg1_or_junk 1, 0)
+#define ___config_enabled(__ignored, val, ...) val
+
/*
* IS_ENABLED(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'y' or 'm',
* 0 otherwise.
*
*/
#define IS_ENABLED(option) \
- (__enabled_ ## option || __enabled_ ## option ## _MODULE)
+ (config_enabled(option) || config_enabled(option##_MODULE))
/*
* IS_BUILTIN(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'y', 0
* otherwise. For boolean options, this is equivalent to
* IS_ENABLED(CONFIG_FOO).
*/
-#define IS_BUILTIN(option) __enabled_ ## option
+#define IS_BUILTIN(option) config_enabled(option)
/*
* IS_MODULE(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'm', 0
* otherwise.
*/
-#define IS_MODULE(option) __enabled_ ## option ## _MODULE
+#define IS_MODULE(option) config_enabled(option##_MODULE)
#endif /* __LINUX_KCONFIG_H */
struct xt_table *table);
/* Check for an extension */
-extern int ip6t_ext_hdr(u8 nexthdr);
+static inline int
+ip6t_ext_hdr(u8 nexthdr)
+{ return (nexthdr == IPPROTO_HOPOPTS) ||
+ (nexthdr == IPPROTO_ROUTING) ||
+ (nexthdr == IPPROTO_FRAGMENT) ||
+ (nexthdr == IPPROTO_ESP) ||
+ (nexthdr == IPPROTO_AH) ||
+ (nexthdr == IPPROTO_NONE) ||
+ (nexthdr == IPPROTO_DSTOPTS);
+}
+
/* find specified header and get offset to it */
extern int ipv6_find_hdr(const struct sk_buff *skb, unsigned int *offset,
int target, unsigned short *fragoff);
#define UPF_CONS_FLOW ((__force upf_t) (1 << 23))
#define UPF_SHARE_IRQ ((__force upf_t) (1 << 24))
#define UPF_EXAR_EFR ((__force upf_t) (1 << 25))
-#define UPF_IIR_ONCE ((__force upf_t) (1 << 26))
+#define UPF_BUG_THRE ((__force upf_t) (1 << 26))
/* The exact UART type is known and should not be probed. */
#define UPF_FIXED_TYPE ((__force upf_t) (1 << 27))
#define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28))
union {
__u32 mark;
__u32 dropcount;
+ __u32 avail_size;
};
sk_buff_data_t transport_header;
return skb_is_nonlinear(skb) ? 0 : skb->end - skb->tail;
}
+/**
+ * skb_availroom - bytes at buffer end
+ * @skb: buffer to check
+ *
+ * Return the number of bytes of free space at the tail of an sk_buff
+ * allocated by sk_stream_alloc()
+ */
+static inline int skb_availroom(const struct sk_buff *skb)
+{
+ return skb_is_nonlinear(skb) ? 0 : skb->avail_size - skb->len;
+}
+
/**
* skb_reserve - adjust headroom
* @skb: buffer to alter
typedef phys_addr_t resource_size_t;
+/*
+ * This type is the placeholder for a hardware interrupt number. It has to be
+ * big enough to enclose whatever representation is used by a given platform.
+ */
+typedef unsigned long irq_hw_number_t;
+
typedef struct {
int counter;
} atomic_t;
/* parity check flag */
#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
-enum port_dev_state {
- PORT_UNREGISTERED,
- PORT_REGISTERING,
- PORT_REGISTERED,
- PORT_UNREGISTERING,
-};
-
/* USB serial flags */
#define USB_SERIAL_WRITE_BUSY 0
char throttle_req;
unsigned long sysrq; /* sysrq timeout */
struct device dev;
- enum port_dev_state dev_state;
};
#define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev)
*/
#define VGA_DEFAULT_DEVICE (NULL)
+struct pci_dev;
+
/* For use by clients */
/**
HCI_SERVICE_CACHE,
HCI_LINK_KEYS,
HCI_DEBUG_KEYS,
+ HCI_UNREGISTER,
HCI_LE_SCAN,
HCI_SSP_ENABLED,
#define HCI_DEV_NONE 0xffff
#define HCI_CHANNEL_RAW 0
-#define HCI_CHANNEL_CONTROL 1
#define HCI_CHANNEL_MONITOR 2
+#define HCI_CHANNEL_CONTROL 3
struct hci_filter {
unsigned long type_mask;
static inline bool hci_conn_ssp_enabled(struct hci_conn *conn)
{
struct hci_dev *hdev = conn->hdev;
- return (test_bit(HCI_SSP_ENABLED, &hdev->flags) &&
+ return (test_bit(HCI_SSP_ENABLED, &hdev->dev_flags) &&
test_bit(HCI_CONN_SSP_ENABLED, &conn->flags));
}
static inline bool eir_has_data_type(u8 *data, size_t data_len, u8 type)
{
- u8 field_len;
- size_t parsed;
+ size_t parsed = 0;
- for (parsed = 0; parsed < data_len - 1; parsed += field_len) {
- field_len = data[0];
+ if (data_len < 2)
+ return false;
+
+ while (parsed < data_len - 1) {
+ u8 field_len = data[0];
if (field_len == 0)
break;
#define MGMT_OP_SET_DISCOVERABLE 0x0006
struct mgmt_cp_set_discoverable {
__u8 val;
- __u16 timeout;
+ __le16 timeout;
} __packed;
#define MGMT_SET_DISCOVERABLE_SIZE 3
ieee80211_get_tx_rate(const struct ieee80211_hw *hw,
const struct ieee80211_tx_info *c)
{
- if (WARN_ON(c->control.rates[0].idx < 0))
+ if (WARN_ON_ONCE(c->control.rates[0].idx < 0))
return NULL;
return &hw->wiphy->bands[c->band]->bitrates[c->control.rates[0].idx];
}
/* --- */
+/* sound printk debug levels */
+enum {
+ SND_PR_ALWAYS,
+ SND_PR_DEBUG,
+ SND_PR_VERBOSE,
+};
+
#if defined(CONFIG_SND_DEBUG) || defined(CONFIG_SND_VERBOSE_PRINTK)
__printf(4, 5)
void __snd_printk(unsigned int level, const char *file, int line,
*/
#define snd_printd(fmt, args...) \
__snd_printk(1, __FILE__, __LINE__, fmt, ##args)
+#define _snd_printd(level, fmt, args...) \
+ __snd_printk(level, __FILE__, __LINE__, fmt, ##args)
/**
* snd_BUG - give a BUG warning message and stack trace
#else /* !CONFIG_SND_DEBUG */
#define snd_printd(fmt, args...) do { } while (0)
+#define _snd_printd(level, fmt, args...) do { } while (0)
#define snd_BUG() do { } while (0)
static inline int __snd_bug_on(int cond)
{
struct cred *new;
int ret;
+ p->replacement_session_keyring = NULL;
+
if (
#ifdef CONFIG_KEYS
!p->cred->thread_keyring &&
help
This option will show the mapping relationship between hardware irq
numbers and Linux irq numbers. The mapping is exposed via debugfs
- in the file "virq_mapping".
+ in the file "irq_domain_mapping".
If you don't know what this means you don't need it.
static DEFINE_MUTEX(irq_domain_mutex);
static DEFINE_MUTEX(revmap_trees_mutex);
-static unsigned int irq_virq_count = NR_IRQS;
static struct irq_domain *irq_default_domain;
/**
}
struct irq_domain *irq_domain_add_nomap(struct device_node *of_node,
+ unsigned int max_irq,
const struct irq_domain_ops *ops,
void *host_data)
{
struct irq_domain *domain = irq_domain_alloc(of_node,
IRQ_DOMAIN_MAP_NOMAP, ops, host_data);
- if (domain)
+ if (domain) {
+ domain->revmap_data.nomap.max_irq = max_irq ? max_irq : ~0;
irq_domain_add(domain);
+ }
return domain;
}
irq_default_domain = domain;
}
-/**
- * irq_set_virq_count() - Set the maximum number of linux irqs
- * @count: number of linux irqs, capped with NR_IRQS
- *
- * This is mainly for use by platforms like iSeries who want to program
- * the virtual irq number in the controller to avoid the reverse mapping
- */
-void irq_set_virq_count(unsigned int count)
-{
- pr_debug("irq: Trying to set virq count to %d\n", count);
-
- BUG_ON(count < NUM_ISA_INTERRUPTS);
- if (count < NR_IRQS)
- irq_virq_count = count;
-}
-
static int irq_setup_virq(struct irq_domain *domain, unsigned int virq,
irq_hw_number_t hwirq)
{
pr_debug("irq: create_direct virq allocation failed\n");
return 0;
}
- if (virq >= irq_virq_count) {
+ if (virq >= domain->revmap_data.nomap.max_irq) {
pr_err("ERROR: no free irqs available below %i maximum\n",
- irq_virq_count);
+ domain->revmap_data.nomap.max_irq);
irq_free_desc(virq);
return 0;
}
-
pr_debug("irq: create_direct obtained virq %d\n", virq);
if (irq_setup_virq(domain, virq, virq)) {
unsigned int irq_create_mapping(struct irq_domain *domain,
irq_hw_number_t hwirq)
{
- unsigned int virq, hint;
+ unsigned int hint;
+ int virq;
pr_debug("irq: irq_create_mapping(0x%p, 0x%lx)\n", domain, hwirq);
return irq_domain_legacy_revmap(domain, hwirq);
/* Allocate a virtual interrupt number */
- hint = hwirq % irq_virq_count;
+ hint = hwirq % nr_irqs;
if (hint == 0)
hint++;
virq = irq_alloc_desc_from(hint, 0);
- if (!virq)
+ if (virq <= 0)
virq = irq_alloc_desc_from(1, 0);
- if (!virq) {
+ if (virq <= 0) {
pr_debug("irq: -> virq allocation failed\n");
return 0;
}
irq_hw_number_t hwirq)
{
unsigned int i;
- unsigned int hint = hwirq % irq_virq_count;
+ unsigned int hint = hwirq % nr_irqs;
/* Look for default domain if nececssary */
if (domain == NULL)
if (data && (data->domain == domain) && (data->hwirq == hwirq))
return i;
i++;
- if (i >= irq_virq_count)
+ if (i >= nr_irqs)
i = 1;
} while(i != hint);
return 0;
void *data;
int i;
- seq_printf(m, "%-5s %-7s %-15s %-18s %s\n", "virq", "hwirq",
- "chip name", "chip data", "domain name");
+ seq_printf(m, "%-5s %-7s %-15s %-*s %s\n", "irq", "hwirq",
+ "chip name", (int)(2 * sizeof(void *) + 2), "chip data",
+ "domain name");
for (i = 1; i < nr_irqs; i++) {
desc = irq_to_desc(i);
seq_printf(m, "%-15s ", p);
data = irq_desc_get_chip_data(desc);
- seq_printf(m, "0x%16p ", data);
+ seq_printf(m, data ? "0x%p " : " %p ", data);
if (desc->irq_data.domain && desc->irq_data.domain->of_node)
p = desc->irq_data.domain->of_node->full_name;
if (value) {
if(copy_from_user(&set_buffer, value, sizeof(set_buffer)))
return -EFAULT;
- } else
- memset((char *) &set_buffer, 0, sizeof(set_buffer));
+ } else {
+ memset(&set_buffer, 0, sizeof(set_buffer));
+ printk_once(KERN_WARNING "%s calls setitimer() with new_value NULL pointer."
+ " Misfeature support will be removed\n",
+ current->comm);
+ }
error = do_setitimer(which, &set_buffer, ovalue ? &get_buffer : NULL);
if (error || !ovalue)
/*
* Avoid nested stack-dumping if a panic occurs during oops processing
*/
- if (!oops_in_progress)
+ if (!test_taint(TAINT_DIE) && oops_in_progress <= 1)
dump_stack();
#endif
#
# Timer subsystem related configuration options
#
+
+# Core internal switch. Selected by NO_HZ / HIGH_RES_TIMERS. This is
+# only related to the tick functionality. Oneshot clockevent devices
+# are supported independ of this.
config TICK_ONESHOT
bool
unsigned long flags;
raw_spin_lock_irqsave(&tick_broadcast_lock, flags);
+
+ tick_broadcast_device.mode = TICKDEV_MODE_ONESHOT;
+
if (cpumask_empty(tick_get_broadcast_mask()))
goto end;
- tick_broadcast_device.mode = TICKDEV_MODE_ONESHOT;
bc = tick_broadcast_device.evtdev;
if (bc)
tick_broadcast_setup_oneshot(bc);
hrtimer_get_expires(&ts->sched_timer), 0))
break;
}
- /* Update jiffies and reread time */
- tick_do_update_jiffies64(now);
+ /* Reread time and update jiffies */
now = ktime_get();
+ tick_do_update_jiffies64(now);
}
}
/* be noisy on error issues */
if (error == -EEXIST)
- printk(KERN_ERR "%s failed for %s with "
- "-EEXIST, don't try to register things with "
- "the same name in the same directory.\n",
- __func__, kobject_name(kobj));
+ WARN(1, "%s failed for %s with "
+ "-EEXIST, don't try to register things with "
+ "the same name in the same directory.\n",
+ __func__, kobject_name(kobj));
else
- printk(KERN_ERR "%s failed for %s (%d)\n",
- __func__, kobject_name(kobj), error);
- dump_stack();
+ WARN(1, "%s failed for %s (error: %d parent: %s)\n",
+ __func__, kobject_name(kobj), error,
+ parent ? kobject_name(parent) : "'none'");
} else
kobj->state_in_sysfs = 1;
* so no worry about deadlock.
*/
page = pte_page(entry);
+ get_page(page);
if (page != pagecache_page)
lock_page(page);
}
if (page != pagecache_page)
unlock_page(page);
+ put_page(page);
out_mutex:
mutex_unlock(&hugetlb_instantiation_mutex);
if (action == CPU_ONLINE)
return NOTIFY_OK;
- if ((action != CPU_DEAD) || action != CPU_DEAD_FROZEN)
+ if (action != CPU_DEAD && action != CPU_DEAD_FROZEN)
return NOTIFY_OK;
for_each_mem_cgroup(iter)
goto try_to_free;
cond_resched();
/* "ret" should also be checked to ensure all lists are empty. */
- } while (memcg->res.usage > 0 || ret);
+ } while (res_counter_read_u64(&memcg->res, RES_USAGE) > 0 || ret);
out:
css_put(&memcg->css);
return ret;
lru_add_drain_all();
/* try to free all pages in this cgroup */
shrink = 1;
- while (nr_retries && memcg->res.usage > 0) {
+ while (nr_retries && res_counter_read_u64(&memcg->res, RES_USAGE) > 0) {
int progress;
if (signal_pending(current)) {
* with multiple processes reclaiming pages, the total
* freeing target can get unreasonably large.
*/
- if (nr_reclaimed >= nr_to_reclaim)
- nr_to_reclaim = 0;
- else
- nr_to_reclaim -= nr_reclaimed;
-
- if (!nr_to_reclaim && priority < DEF_PRIORITY)
+ if (nr_reclaimed >= nr_to_reclaim && priority < DEF_PRIORITY)
break;
}
blk_finish_plug(&plug);
hci_req_lock(hdev);
+ if (test_bit(HCI_UNREGISTER, &hdev->dev_flags)) {
+ ret = -ENODEV;
+ goto done;
+ }
+
if (hdev->rfkill && rfkill_blocked(hdev->rfkill)) {
ret = -ERFKILL;
goto done;
BT_DBG("%p name %s bus %d", hdev, hdev->name, hdev->bus);
+ set_bit(HCI_UNREGISTER, &hdev->dev_flags);
+
write_lock(&hci_dev_list_lock);
list_del(&hdev->list);
write_unlock(&hci_dev_list_lock);
if (chan->retry_count >= chan->remote_max_tx) {
l2cap_send_disconn_req(chan->conn, chan, ECONNABORTED);
l2cap_chan_unlock(chan);
+ l2cap_chan_put(chan);
return;
}
l2cap_send_rr_or_rnr(chan, L2CAP_CTRL_POLL);
l2cap_chan_unlock(chan);
+ l2cap_chan_put(chan);
}
static void l2cap_retrans_timeout(struct work_struct *work)
l2cap_send_rr_or_rnr(chan, L2CAP_CTRL_POLL);
l2cap_chan_unlock(chan);
+ l2cap_chan_put(chan);
}
static void l2cap_drop_acked_frames(struct l2cap_chan *chan)
}
if (la.l2_cid)
- err = l2cap_add_scid(chan, la.l2_cid);
+ err = l2cap_add_scid(chan, __le16_to_cpu(la.l2_cid));
else
err = l2cap_add_psm(chan, &la.l2_bdaddr, la.l2_psm);
if (la.l2_cid && la.l2_psm)
return -EINVAL;
- err = l2cap_chan_connect(chan, la.l2_psm, la.l2_cid, &la.l2_bdaddr);
+ err = l2cap_chan_connect(chan, la.l2_psm, __le16_to_cpu(la.l2_cid),
+ &la.l2_bdaddr);
if (err)
return err;
if (cp->val) {
type = PAGE_SCAN_TYPE_INTERLACED;
- acp.interval = 0x0024; /* 22.5 msec page scan interval */
+
+ /* 22.5 msec page scan interval */
+ acp.interval = __constant_cpu_to_le16(0x0024);
} else {
type = PAGE_SCAN_TYPE_STANDARD; /* default */
- acp.interval = 0x0800; /* default 1.28 sec page scan */
+
+ /* default 1.28 sec page scan */
+ acp.interval = __constant_cpu_to_le16(0x0800);
}
- acp.window = 0x0012; /* default 11.25 msec page scan window */
+ /* default 11.25 msec page scan window */
+ acp.window = __constant_cpu_to_le16(0x0012);
err = hci_send_cmd(hdev, HCI_OP_WRITE_PAGE_SCAN_ACTIVITY, sizeof(acp),
&acp);
name, name_len);
if (dev_class && memcmp(dev_class, "\0\0\0", 3) != 0)
- eir_len = eir_append_data(&ev->eir[eir_len], eir_len,
+ eir_len = eir_append_data(ev->eir, eir_len,
EIR_CLASS_OF_DEV, dev_class, 3);
put_unaligned_le16(eir_len, &ev->eir_len);
hlist_del_rcu(&mp->hlist[mdb->ver]);
mdb->size--;
- del_timer(&mp->query_timer);
call_rcu_bh(&mp->rcu, br_multicast_free_group);
out:
rcu_assign_pointer(*pp, p->next);
hlist_del_init(&p->mglist);
del_timer(&p->timer);
- del_timer(&p->query_timer);
call_rcu_bh(&p->rcu, br_multicast_free_pg);
if (!mp->ports && !mp->mglist &&
return NULL;
}
-static void br_multicast_send_group_query(struct net_bridge_mdb_entry *mp)
-{
- struct net_bridge *br = mp->br;
- struct sk_buff *skb;
-
- skb = br_multicast_alloc_query(br, &mp->addr);
- if (!skb)
- goto timer;
-
- netif_rx(skb);
-
-timer:
- if (++mp->queries_sent < br->multicast_last_member_count)
- mod_timer(&mp->query_timer,
- jiffies + br->multicast_last_member_interval);
-}
-
-static void br_multicast_group_query_expired(unsigned long data)
-{
- struct net_bridge_mdb_entry *mp = (void *)data;
- struct net_bridge *br = mp->br;
-
- spin_lock(&br->multicast_lock);
- if (!netif_running(br->dev) || !mp->mglist ||
- mp->queries_sent >= br->multicast_last_member_count)
- goto out;
-
- br_multicast_send_group_query(mp);
-
-out:
- spin_unlock(&br->multicast_lock);
-}
-
-static void br_multicast_send_port_group_query(struct net_bridge_port_group *pg)
-{
- struct net_bridge_port *port = pg->port;
- struct net_bridge *br = port->br;
- struct sk_buff *skb;
-
- skb = br_multicast_alloc_query(br, &pg->addr);
- if (!skb)
- goto timer;
-
- br_deliver(port, skb);
-
-timer:
- if (++pg->queries_sent < br->multicast_last_member_count)
- mod_timer(&pg->query_timer,
- jiffies + br->multicast_last_member_interval);
-}
-
-static void br_multicast_port_group_query_expired(unsigned long data)
-{
- struct net_bridge_port_group *pg = (void *)data;
- struct net_bridge_port *port = pg->port;
- struct net_bridge *br = port->br;
-
- spin_lock(&br->multicast_lock);
- if (!netif_running(br->dev) || hlist_unhashed(&pg->mglist) ||
- pg->queries_sent >= br->multicast_last_member_count)
- goto out;
-
- br_multicast_send_port_group_query(pg);
-
-out:
- spin_unlock(&br->multicast_lock);
-}
-
static struct net_bridge_mdb_entry *br_multicast_get_group(
struct net_bridge *br, struct net_bridge_port *port,
struct br_ip *group, int hash)
mp->addr = *group;
setup_timer(&mp->timer, br_multicast_group_expired,
(unsigned long)mp);
- setup_timer(&mp->query_timer, br_multicast_group_query_expired,
- (unsigned long)mp);
hlist_add_head_rcu(&mp->hlist[mdb->ver], &mdb->mhash[hash]);
mdb->size++;
hlist_add_head(&p->mglist, &port->mglist);
setup_timer(&p->timer, br_multicast_port_group_expired,
(unsigned long)p);
- setup_timer(&p->query_timer, br_multicast_port_group_query_expired,
- (unsigned long)p);
rcu_assign_pointer(*pp, p);
time_after(mp->timer.expires, time) :
try_to_del_timer_sync(&mp->timer) >= 0)) {
mod_timer(&mp->timer, time);
-
- mp->queries_sent = 0;
- mod_timer(&mp->query_timer, now);
}
goto out;
time_after(p->timer.expires, time) :
try_to_del_timer_sync(&p->timer) >= 0)) {
mod_timer(&p->timer, time);
-
- p->queries_sent = 0;
- mod_timer(&p->query_timer, now);
}
break;
hlist_for_each_entry_safe(mp, p, n, &mdb->mhash[i],
hlist[ver]) {
del_timer(&mp->timer);
- del_timer(&mp->query_timer);
call_rcu_bh(&mp->rcu, br_multicast_free_group);
}
}
struct hlist_node mglist;
struct rcu_head rcu;
struct timer_list timer;
- struct timer_list query_timer;
struct br_ip addr;
- u32 queries_sent;
};
struct net_bridge_mdb_entry
struct net_bridge_port_group __rcu *ports;
struct rcu_head rcu;
struct timer_list timer;
- struct timer_list query_timer;
struct br_ip addr;
bool mglist;
- u32 queries_sent;
};
struct net_bridge_mdb_htable
goto adjust_others;
}
- data = kmalloc(size + sizeof(struct skb_shared_info), gfp_mask);
+ data = kmalloc(size + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)),
+ gfp_mask);
if (!data)
goto nodata;
+ size = SKB_WITH_OVERHEAD(ksize(data));
/* Copy only real data... and, alas, header. This should be
* optimized for the cases when header is void.
iph = skb_header_pointer(skb, nhoff, sizeof(_iph), &_iph);
if (iph == NULL)
- return -NF_DROP;
+ return -NF_ACCEPT;
/* Conntrack defragments packets, we might still see fragments
* inside ICMP packets though. */
if (iph->frag_off & htons(IP_OFFSET))
- return -NF_DROP;
+ return -NF_ACCEPT;
*dataoff = nhoff + (iph->ihl << 2);
*protonum = iph->protocol;
+ /* Check bogus IP headers */
+ if (*dataoff > skb->len) {
+ pr_debug("nf_conntrack_ipv4: bogus IPv4 packet: "
+ "nhoff %u, ihl %u, skblen %u\n",
+ nhoff, iph->ihl << 2, skb->len);
+ return -NF_ACCEPT;
+ }
+
return NF_ACCEPT;
}
skb = alloc_skb_fclone(size + sk->sk_prot->max_header, gfp);
if (skb) {
if (sk_wmem_schedule(sk, skb->truesize)) {
+ skb_reserve(skb, sk->sk_prot->max_header);
/*
* Make sure that we have exactly size bytes
* available to the caller, no more, no less.
*/
- skb_reserve(skb, skb_tailroom(skb) - size);
+ skb->avail_size = size;
return skb;
}
__kfree_skb(skb);
copy = seglen;
/* Where to copy to? */
- if (skb_tailroom(skb) > 0) {
+ if (skb_availroom(skb) > 0) {
/* We have some space in skb head. Superb! */
- if (copy > skb_tailroom(skb))
- copy = skb_tailroom(skb);
+ copy = min_t(int, copy, skb_availroom(skb));
err = skb_add_data_nocache(sk, skb, from, copy);
if (err)
goto do_fault;
if ((available < target) &&
(len > sysctl_tcp_dma_copybreak) && !(flags & MSG_PEEK) &&
!sysctl_tcp_low_latency &&
- dma_find_channel(DMA_MEMCPY)) {
+ net_dma_find_channel()) {
preempt_enable_no_resched();
tp->ucopy.pinned_list =
dma_pin_iovec_pages(msg->msg_iov, len);
if (!(flags & MSG_TRUNC)) {
#ifdef CONFIG_NET_DMA
if (!tp->ucopy.dma_chan && tp->ucopy.pinned_list)
- tp->ucopy.dma_chan = dma_find_channel(DMA_MEMCPY);
+ tp->ucopy.dma_chan = net_dma_find_channel();
if (tp->ucopy.dma_chan) {
tp->ucopy.dma_cookie = dma_skb_copy_datagram_iovec(
tcp_init_mem(&init_net);
/* Set per-socket limits to no more than 1/128 the pressure threshold */
- limit = nr_free_buffer_pages() << (PAGE_SHIFT - 10);
- limit = max(limit, 128UL);
+ limit = nr_free_buffer_pages() << (PAGE_SHIFT - 7);
max_share = min(4UL*1024*1024, limit);
sysctl_tcp_wmem[0] = SK_MEM_QUANTUM;
if (!win_dep) {
m -= (new_sample >> 3);
new_sample += m;
- } else if (m < new_sample)
- new_sample = m << 3;
+ } else {
+ m <<= 3;
+ if (m < new_sample)
+ new_sample = m;
+ }
} else {
/* No previous measure. */
new_sample = m << 3;
return 0;
if (!tp->ucopy.dma_chan && tp->ucopy.pinned_list)
- tp->ucopy.dma_chan = dma_find_channel(DMA_MEMCPY);
+ tp->ucopy.dma_chan = net_dma_find_channel();
if (tp->ucopy.dma_chan && skb_csum_unnecessary(skb)) {
#ifdef CONFIG_NET_DMA
struct tcp_sock *tp = tcp_sk(sk);
if (!tp->ucopy.dma_chan && tp->ucopy.pinned_list)
- tp->ucopy.dma_chan = dma_find_channel(DMA_MEMCPY);
+ tp->ucopy.dma_chan = net_dma_find_channel();
if (tp->ucopy.dma_chan)
ret = tcp_v4_do_rcv(sk, skb);
else
/* Punt if not enough space exists in the first SKB for
* the data in the second
*/
- if (skb->len > skb_tailroom(to))
+ if (skb->len > skb_availroom(to))
break;
if (after(TCP_SKB_CB(skb)->end_seq, tcp_wnd_end(tp)))
Hence the start of any table is given by get_table() below. */
-/* Check for an extension */
-int
-ip6t_ext_hdr(u8 nexthdr)
-{
- return (nexthdr == IPPROTO_HOPOPTS) ||
- (nexthdr == IPPROTO_ROUTING) ||
- (nexthdr == IPPROTO_FRAGMENT) ||
- (nexthdr == IPPROTO_ESP) ||
- (nexthdr == IPPROTO_AH) ||
- (nexthdr == IPPROTO_NONE) ||
- (nexthdr == IPPROTO_DSTOPTS);
-}
-
/* Returns whether matches rule or not. */
/* Performance critical - called for every packet */
static inline bool
EXPORT_SYMBOL(ip6t_register_table);
EXPORT_SYMBOL(ip6t_unregister_table);
EXPORT_SYMBOL(ip6t_do_table);
-EXPORT_SYMBOL(ip6t_ext_hdr);
EXPORT_SYMBOL(ipv6_find_hdr);
module_init(ip6_tables_init);
#ifdef CONFIG_NET_DMA
struct tcp_sock *tp = tcp_sk(sk);
if (!tp->ucopy.dma_chan && tp->ucopy.pinned_list)
- tp->ucopy.dma_chan = dma_find_channel(DMA_MEMCPY);
+ tp->ucopy.dma_chan = net_dma_find_channel();
if (tp->ucopy.dma_chan)
ret = tcp_v6_do_rcv(sk, skb);
else
*/
printk(KERN_DEBUG "%s: waiting for beacon from %pM\n",
sdata->name, ifmgd->bssid);
- assoc_data->timeout = jiffies +
- TU_TO_EXP_TIME(req->bss->beacon_interval);
+ assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval);
} else {
assoc_data->have_beacon = true;
assoc_data->sent_assoc = false;
return 0;
err_timeout:
- nf_conntrack_timeout_fini(net);
+ nf_conntrack_ecache_fini(net);
err_ecache:
nf_conntrack_tstamp_fini(net);
err_tstamp:
* Let's try to use the data from the packet.
*/
sender->td_end = end;
- win <<= sender->td_scale;
- sender->td_maxwin = (win == 0 ? 1 : win);
+ swin = win << sender->td_scale;
+ sender->td_maxwin = (swin == 0 ? 1 : swin);
sender->td_maxend = end + sender->td_maxwin;
/*
* We haven't seen traffic in the other direction yet
while (remaining_len > 0) {
- frag_len = min_t(u16, local->remote_miu, remaining_len);
+ frag_len = min_t(size_t, local->remote_miu, remaining_len);
pr_debug("Fragment %zd bytes remaining %zd",
frag_len, remaining_len);
release_sock(sk);
remaining_len -= frag_len;
- msg_ptr += len;
+ msg_ptr += frag_len;
}
kfree(msg_data);
goto bad_res;
}
+ if (!netif_running(netdev)) {
+ result = -ENETDOWN;
+ goto bad_res;
+ }
+
nla_for_each_nested(nl_txq_params,
info->attrs[NL80211_ATTR_WIPHY_TXQ_PARAMS],
rem_txq_params) {
.doit = nl80211_get_key,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
.doit = nl80211_set_beacon,
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
.doit = nl80211_start_ap,
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
.doit = nl80211_stop_ap,
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.doit = nl80211_set_station,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.doit = nl80211_del_station,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.doit = nl80211_del_mpath,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.doit = nl80211_set_bss,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.doit = nl80211_get_mesh_config,
.policy = nl80211_policy,
/* can be retrieved by unprivileged users */
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.doit = nl80211_setdel_pmksa,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.doit = nl80211_setdel_pmksa,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.doit = nl80211_flush_pmksa,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.doit = nl80211_probe_client,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
- .internal_flags = NL80211_FLAG_NEED_NETDEV |
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
if (cmd == SIOCSIWENCODEEXT) {
struct iw_encode_ext *ee = (void *) extra;
- if (iwp->length < sizeof(*ee) + ee->key_len)
- return -EFAULT;
+ if (iwp->length < sizeof(*ee) + ee->key_len) {
+ err = -EFAULT;
+ goto out;
+ }
}
}
.print_comment = header_print_comment,
};
-/*
- * Generate the __enabled_CONFIG_* and __enabled_CONFIG_*_MODULE macros for
- * use by the IS_{ENABLED,BUILTIN,MODULE} macros. The _MODULE variant is
- * generated even for booleans so that the IS_ENABLED() macro works.
- */
-static void
-header_print__enabled_symbol(FILE *fp, struct symbol *sym, const char *value, void *arg)
-{
-
- switch (sym->type) {
- case S_BOOLEAN:
- case S_TRISTATE: {
- fprintf(fp, "#define __enabled_" CONFIG_ "%s %d\n",
- sym->name, (*value == 'y'));
- fprintf(fp, "#define __enabled_" CONFIG_ "%s_MODULE %d\n",
- sym->name, (*value == 'm'));
- break;
- }
- default:
- break;
- }
-}
-
-static struct conf_printer header__enabled_printer_cb =
-{
- .print_symbol = header_print__enabled_symbol,
- .print_comment = header_print_comment,
-};
-
/*
* Tristate printer
*
conf_write_heading(out_h, &header_printer_cb, NULL);
for_all_symbols(i, sym) {
- if (!sym->name)
- continue;
-
sym_calc_value(sym);
-
- conf_write_symbol(out_h, sym, &header__enabled_printer_cb, NULL);
-
- if (!(sym->flags & SYMBOL_WRITE))
+ if (!(sym->flags & SYMBOL_WRITE) || !sym->name)
continue;
+ /* write symbol to auto.conf, tristate and header files */
conf_write_symbol(out, sym, &kconfig_printer_cb, (void *)1);
conf_write_symbol(tristate, sym, &tristate_printer_cb, (void *)1);
/* strip trailing .o */
s = strrchr(p, '.');
if (s != NULL)
- if (strcmp(s, ".o") == 0)
+ if (strcmp(s, ".o") == 0) {
*s = '\0';
+ mod->is_dot_o = 1;
+ }
/* add to list */
mod->name = p;
unsigned int crc;
enum export export;
- if (!is_vmlinux(mod->name) && strncmp(symname, "__ksymtab", 9) == 0)
+ if ((!is_vmlinux(mod->name) || mod->is_dot_o) &&
+ strncmp(symname, "__ksymtab", 9) == 0)
export = export_from_secname(info, get_secindex(info, sym));
else
export = export_from_sec(info, get_secindex(info, sym));
int has_cleanup;
struct buffer dev_table_buf;
char srcversion[25];
+ int is_dot_o;
};
struct elf_info {
char *hostsp;
struct socket_smack *ssp = sk->sk_security;
struct smk_audit_info ad;
- struct lsm_network_audit net;
rcu_read_lock();
hostsp = smack_host_label(sap);
if (hostsp != NULL) {
- sk_lbl = SMACK_UNLABELED_SOCKET;
#ifdef CONFIG_AUDIT
+ struct lsm_network_audit net;
+
smk_ad_init_net(&ad, __func__, LSM_AUDIT_DATA_NET, &net);
ad.a.u.net->family = sap->sin_family;
ad.a.u.net->dport = sap->sin_port;
ad.a.u.net->v4info.daddr = sap->sin_addr.s_addr;
#endif
+ sk_lbl = SMACK_UNLABELED_SOCKET;
rc = smk_access(ssp->smk_out, hostsp, MAY_WRITE, &ad);
} else {
sk_lbl = SMACK_CIPSO_SOCKET;
struct socket_smack *osp = other->sk_security;
struct socket_smack *nsp = newsk->sk_security;
struct smk_audit_info ad;
- struct lsm_network_audit net;
int rc = 0;
+#ifdef CONFIG_AUDIT
+ struct lsm_network_audit net;
+
smk_ad_init_net(&ad, __func__, LSM_AUDIT_DATA_NET, &net);
smk_ad_setfield_u_net_sk(&ad, other);
+#endif
if (!capable(CAP_MAC_OVERRIDE))
rc = smk_access(ssp->smk_out, osp->smk_in, MAY_WRITE, &ad);
struct socket_smack *ssp = sock->sk->sk_security;
struct socket_smack *osp = other->sk->sk_security;
struct smk_audit_info ad;
- struct lsm_network_audit net;
int rc = 0;
+#ifdef CONFIG_AUDIT
+ struct lsm_network_audit net;
+
smk_ad_init_net(&ad, __func__, LSM_AUDIT_DATA_NET, &net);
smk_ad_setfield_u_net_sk(&ad, other->sk);
+#endif
if (!capable(CAP_MAC_OVERRIDE))
rc = smk_access(ssp->smk_out, osp->smk_in, MAY_WRITE, &ad);
char *csp;
int rc;
struct smk_audit_info ad;
+#ifdef CONFIG_AUDIT
struct lsm_network_audit net;
+#endif
if (sk->sk_family != PF_INET && sk->sk_family != PF_INET6)
return 0;
char *sp;
int rc;
struct smk_audit_info ad;
+#ifdef CONFIG_AUDIT
struct lsm_network_audit net;
+#endif
/* handle mapped IPv4 packets arriving via IPv6 sockets */
if (family == PF_INET6 && skb->protocol == htons(ETH_P_IP))
irq_cfg = get_irq_config(sscape->type, irq[dev]);
if (irq_cfg == INVALID_IRQ) {
snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", irq[dev]);
- return -ENXIO;
+ err = -ENXIO;
+ goto _release_dma;
}
mpu_irq_cfg = get_irq_config(sscape->type, mpu_irq[dev]);
if (mpu_irq_cfg == INVALID_IRQ) {
snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", mpu_irq[dev]);
- return -ENXIO;
+ err = -ENXIO;
+ goto _release_dma;
}
/*
static int upload_dsp_code(void)
{
+ int ret = 0;
+
msnd_outb(HPBLKSEL_0, dev.io + HP_BLKS);
#ifndef HAVE_DSPCODEH
INITCODESIZE = mod_firmware_load(INITCODEFILE, &INITCODE);
memcpy_toio(dev.base, PERMCODE, PERMCODESIZE);
if (msnd_upload_host(&dev, INITCODE, INITCODESIZE) < 0) {
printk(KERN_WARNING LOGNAME ": Error uploading to DSP\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto out;
}
#ifdef HAVE_DSPCODEH
printk(KERN_INFO LOGNAME ": DSP firmware uploaded (resident)\n");
printk(KERN_INFO LOGNAME ": DSP firmware uploaded\n");
#endif
+out:
#ifndef HAVE_DSPCODEH
vfree(INITCODE);
vfree(PERMCODE);
#endif
- return 0;
+ return ret;
}
#ifdef MSND_CLASSIC
config SND_TEA575X
tristate
- depends on SND_FM801_TEA575X_BOOL || SND_ES1968_RADIO || RADIO_SF16FMR2
- default SND_FM801 || SND_ES1968 || RADIO_SF16FMR2
+ depends on SND_FM801_TEA575X_BOOL || SND_ES1968_RADIO || RADIO_SF16FMR2 || RADIO_MAXIRADIO
+ default SND_FM801 || SND_ES1968 || RADIO_SF16FMR2 || RADIO_MAXIRADIO
menuconfig SND_PCI
bool "PCI sound devices"
/******************************************************************************
AudioScience HPI driver
- Copyright (C) 1997-2011 AudioScience Inc. <support@audioscience.com>
+ Copyright (C) 1997-2012 AudioScience Inc. <support@audioscience.com>
This program is free software; you can redistribute it and/or modify
it under the terms of version 2 of the GNU General Public License as
If this function succeeds, then HpiOs_LockedMem_GetVirtAddr() and
HpiOs_LockedMem_GetPyhsAddr() will always succed on the returned handle.
*/
-int hpios_locked_mem_alloc(struct consistent_dma_area *p_locked_mem_handle,
+u16 hpios_locked_mem_alloc(struct consistent_dma_area *p_locked_mem_handle,
/**< memory handle */
u32 size, /**< Size in bytes to allocate */
struct pci_dev *p_os_reference
/******************************************************************************
AudioScience HPI driver
- Copyright (C) 1997-2011 AudioScience Inc. <support@audioscience.com>
+ Copyright (C) 1997-2012 AudioScience Inc. <support@audioscience.com>
This program is free software; you can redistribute it and/or modify
it under the terms of version 2 of the GNU General Public License as
}
-/** Allocated an area of locked memory for bus master DMA operations.
+/** Allocate an area of locked memory for bus master DMA operations.
-On error, return -ENOMEM, and *pMemArea.size = 0
+If allocation fails, return 1, and *pMemArea.size = 0
*/
-int hpios_locked_mem_alloc(struct consistent_dma_area *p_mem_area, u32 size,
+u16 hpios_locked_mem_alloc(struct consistent_dma_area *p_mem_area, u32 size,
struct pci_dev *pdev)
{
/*?? any benefit in using managed dmam_alloc_coherent? */
HPI_DEBUG_LOG(WARNING,
"failed to allocate %d bytes locked memory\n", size);
p_mem_area->size = 0;
- return -ENOMEM;
+ return 1;
}
}
unsigned int pin_amp_workaround:1; /* pin out-amp takes index
* (e.g. Conexant codecs)
*/
+ unsigned int single_adc_amp:1; /* adc in-amp takes no index
+ * (e.g. CX20549 codec)
+ */
unsigned int no_sticky_stream:1; /* no sticky-PCM stream assignment */
unsigned int pins_shutup:1; /* pins are shut up */
unsigned int no_trigger_sense:1; /* don't trigger at pin-sensing */
else
buf2[0] = '\0';
- printk(KERN_INFO "HDMI: supports coding type %s:"
+ _snd_printd(SND_PR_VERBOSE, "HDMI: supports coding type %s:"
" channels = %d, rates =%s%s\n",
cea_audio_coding_type_names[a->format],
a->channels,
{
int i;
- printk(KERN_INFO "HDMI: detected monitor %s at connection type %s\n",
+ _snd_printd(SND_PR_VERBOSE, "HDMI: detected monitor %s at connection type %s\n",
e->monitor_name,
eld_connection_type_names[e->conn_type]);
if (e->spk_alloc) {
char buf[SND_PRINT_CHANNEL_ALLOCATION_ADVISED_BUFSIZE];
snd_print_channel_allocation(e->spk_alloc, buf, sizeof(buf));
- printk(KERN_INFO "HDMI: available speakers:%s\n", buf);
+ _snd_printd(SND_PR_VERBOSE, "HDMI: available speakers:%s\n", buf);
}
for (i = 0; i < e->sad_count; i++)
snd_iprintf(buffer, " Amp-In caps: ");
print_amp_caps(buffer, codec, nid, HDA_INPUT);
snd_iprintf(buffer, " Amp-In vals: ");
- print_amp_vals(buffer, codec, nid, HDA_INPUT,
- wid_caps & AC_WCAP_STEREO,
- wid_type == AC_WID_PIN ? 1 : conn_len);
+ if (wid_type == AC_WID_PIN ||
+ (codec->single_adc_amp &&
+ wid_type == AC_WID_AUD_IN))
+ print_amp_vals(buffer, codec, nid, HDA_INPUT,
+ wid_caps & AC_WCAP_STEREO,
+ 1);
+ else
+ print_amp_vals(buffer, codec, nid, HDA_INPUT,
+ wid_caps & AC_WCAP_STEREO,
+ conn_len);
}
if (wid_caps & AC_WCAP_OUT_AMP) {
snd_iprintf(buffer, " Amp-Out caps: ");
unsigned int hp_laptop:1;
unsigned int asus:1;
unsigned int pin_eapd_ctrls:1;
- unsigned int single_adc_amp:1;
unsigned int adc_switching:1;
static const struct hda_input_mux cxt5045_capture_source = {
.num_items = 2,
.items = {
- { "IntMic", 0x1 },
- { "ExtMic", 0x2 },
+ { "Internal Mic", 0x1 },
+ { "Mic", 0x2 },
}
};
static const struct hda_input_mux cxt5045_capture_source_benq = {
- .num_items = 5,
+ .num_items = 4,
.items = {
- { "IntMic", 0x1 },
- { "ExtMic", 0x2 },
- { "LineIn", 0x3 },
- { "CD", 0x4 },
- { "Mixer", 0x0 },
+ { "Internal Mic", 0x1 },
+ { "Mic", 0x2 },
+ { "Line", 0x3 },
+ { "Mixer", 0x0 },
}
};
static const struct hda_input_mux cxt5045_capture_source_hp530 = {
.num_items = 2,
.items = {
- { "ExtMic", 0x1 },
- { "IntMic", 0x2 },
+ { "Mic", 0x1 },
+ { "Internal Mic", 0x2 },
}
};
}
static const struct snd_kcontrol_new cxt5045_mixers[] = {
- HDA_CODEC_VOLUME("Internal Mic Capture Volume", 0x1a, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Internal Mic Capture Switch", 0x1a, 0x01, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Capture Volume", 0x1a, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Capture Switch", 0x1a, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Capture Volume", 0x1a, 0x00, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x1a, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("PCM Playback Volume", 0x17, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("PCM Playback Switch", 0x17, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x17, 0x1, HDA_INPUT),
};
static const struct snd_kcontrol_new cxt5045_benq_mixers[] = {
- HDA_CODEC_VOLUME("CD Capture Volume", 0x1a, 0x04, HDA_INPUT),
- HDA_CODEC_MUTE("CD Capture Switch", 0x1a, 0x04, HDA_INPUT),
- HDA_CODEC_VOLUME("CD Playback Volume", 0x17, 0x4, HDA_INPUT),
- HDA_CODEC_MUTE("CD Playback Switch", 0x17, 0x4, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Line In Capture Volume", 0x1a, 0x03, HDA_INPUT),
- HDA_CODEC_MUTE("Line In Capture Switch", 0x1a, 0x03, HDA_INPUT),
- HDA_CODEC_VOLUME("Line In Playback Volume", 0x17, 0x3, HDA_INPUT),
- HDA_CODEC_MUTE("Line In Playback Switch", 0x17, 0x3, HDA_INPUT),
-
- HDA_CODEC_VOLUME("Mixer Capture Volume", 0x1a, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mixer Capture Switch", 0x1a, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x17, 0x3, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x17, 0x3, HDA_INPUT),
{}
};
static const struct snd_kcontrol_new cxt5045_mixers_hp530[] = {
- HDA_CODEC_VOLUME("Internal Mic Capture Volume", 0x1a, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE("Internal Mic Capture Switch", 0x1a, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Capture Volume", 0x1a, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Capture Switch", 0x1a, 0x01, HDA_INPUT),
+ HDA_CODEC_VOLUME("Capture Volume", 0x1a, 0x00, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x1a, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("PCM Playback Volume", 0x17, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("PCM Playback Switch", 0x17, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x17, 0x2, HDA_INPUT),
/* Output controls */
HDA_CODEC_VOLUME("Speaker Playback Volume", 0x10, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Speaker Playback Switch", 0x10, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Node 11 Playback Volume", 0x11, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Node 11 Playback Switch", 0x11, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Node 12 Playback Volume", 0x12, 0x0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Node 12 Playback Switch", 0x12, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("HP-OUT Playback Volume", 0x11, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("HP-OUT Playback Switch", 0x11, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("LINE1 Playback Volume", 0x12, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("LINE1 Playback Switch", 0x12, 0x0, HDA_OUTPUT),
/* Modes for retasking pin widgets */
CXT_PIN_MODE("HP-OUT pin mode", 0x11, CXT_PIN_DIR_INOUT),
/* Loopback mixer controls */
- HDA_CODEC_VOLUME("Mixer-1 Volume", 0x17, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Mixer-1 Switch", 0x17, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Mixer-2 Volume", 0x17, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Mixer-2 Switch", 0x17, 0x1, HDA_INPUT),
- HDA_CODEC_VOLUME("Mixer-3 Volume", 0x17, 0x2, HDA_INPUT),
- HDA_CODEC_MUTE("Mixer-3 Switch", 0x17, 0x2, HDA_INPUT),
- HDA_CODEC_VOLUME("Mixer-4 Volume", 0x17, 0x3, HDA_INPUT),
- HDA_CODEC_MUTE("Mixer-4 Switch", 0x17, 0x3, HDA_INPUT),
- HDA_CODEC_VOLUME("Mixer-5 Volume", 0x17, 0x4, HDA_INPUT),
- HDA_CODEC_MUTE("Mixer-5 Switch", 0x17, 0x4, HDA_INPUT),
+ HDA_CODEC_VOLUME("PCM Volume", 0x17, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("PCM Switch", 0x17, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("MIC1 pin Volume", 0x17, 0x1, HDA_INPUT),
+ HDA_CODEC_MUTE("MIC1 pin Switch", 0x17, 0x1, HDA_INPUT),
+ HDA_CODEC_VOLUME("LINE1 pin Volume", 0x17, 0x2, HDA_INPUT),
+ HDA_CODEC_MUTE("LINE1 pin Switch", 0x17, 0x2, HDA_INPUT),
+ HDA_CODEC_VOLUME("HP-OUT pin Volume", 0x17, 0x3, HDA_INPUT),
+ HDA_CODEC_MUTE("HP-OUT pin Switch", 0x17, 0x3, HDA_INPUT),
+ HDA_CODEC_VOLUME("CD pin Volume", 0x17, 0x4, HDA_INPUT),
+ HDA_CODEC_MUTE("CD pin Switch", 0x17, 0x4, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Input Source",
.put = conexant_mux_enum_put,
},
/* Audio input controls */
- HDA_CODEC_VOLUME("Input-1 Volume", 0x1a, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Input-1 Switch", 0x1a, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Input-2 Volume", 0x1a, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("Input-2 Switch", 0x1a, 0x1, HDA_INPUT),
- HDA_CODEC_VOLUME("Input-3 Volume", 0x1a, 0x2, HDA_INPUT),
- HDA_CODEC_MUTE("Input-3 Switch", 0x1a, 0x2, HDA_INPUT),
- HDA_CODEC_VOLUME("Input-4 Volume", 0x1a, 0x3, HDA_INPUT),
- HDA_CODEC_MUTE("Input-4 Switch", 0x1a, 0x3, HDA_INPUT),
- HDA_CODEC_VOLUME("Input-5 Volume", 0x1a, 0x4, HDA_INPUT),
- HDA_CODEC_MUTE("Input-5 Switch", 0x1a, 0x4, HDA_INPUT),
+ HDA_CODEC_VOLUME("Capture Volume", 0x1a, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x1a, 0x0, HDA_INPUT),
{ } /* end */
};
{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x18, AC_VERB_SET_DIGI_CONVERT_1, 0},
- /* Start with output sum widgets muted and their output gains at min */
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-
/* Unmute retasking pin widget output buffers since the default
* state appears to be output. As the pin mode is changed by the
* user the pin mode control will take care of enabling the pin's
/* Set ADC connection select to match default mixer setting (mic1
* pin)
*/
- {0x1a, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x17, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x1a, AC_VERB_SET_CONNECT_SEL, 0x01},
+ {0x17, AC_VERB_SET_CONNECT_SEL, 0x01},
/* Mute all inputs to mixer widget (even unconnected ones) */
- {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* Mixer pin */
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* Mixer */
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* Mic1 pin */
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* Line pin */
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* HP pin */
if (!spec)
return -ENOMEM;
codec->spec = spec;
- codec->pin_amp_workaround = 1;
+ codec->single_adc_amp = 1;
spec->multiout.max_channels = 2;
spec->multiout.num_dacs = ARRAY_SIZE(cxt5045_dac_nids);
int idx = get_input_connection(codec, adc_nid, nid);
if (idx < 0)
continue;
- if (spec->single_adc_amp)
+ if (codec->single_adc_amp)
idx = 0;
return cx_auto_add_volume_idx(codec, label, pfx,
cidx, adc_nid, HDA_INPUT, idx);
if (cidx < 0)
continue;
input_conn[i] = spec->imux_info[i].adc;
- if (!spec->single_adc_amp)
+ if (!codec->single_adc_amp)
input_conn[i] |= cidx << 8;
if (i > 0 && input_conn[i] != input_conn[0])
multi_connection = 1;
if (!spec)
return -ENOMEM;
codec->spec = spec;
- codec->pin_amp_workaround = 1;
switch (codec->vendor_id) {
case 0x14f15045:
- spec->single_adc_amp = 1;
+ codec->single_adc_amp = 1;
break;
case 0x14f15051:
add_cx5051_fake_mutes(codec);
+ codec->pin_amp_workaround = 1;
break;
+ default:
+ codec->pin_amp_workaround = 1;
}
apply_pin_fixup(codec, cxt_fixups, cxt_pincfg_tbl);
struct hdmi_spec *spec = codec->spec;
int tag = res >> AC_UNSOL_RES_TAG_SHIFT;
int pin_nid;
- int pd = !!(res & AC_UNSOL_RES_PD);
- int eldv = !!(res & AC_UNSOL_RES_ELDV);
int pin_idx;
struct hda_jack_tbl *jack;
pin_nid = jack->nid;
jack->jack_dirty = 1;
- printk(KERN_INFO
+ _snd_printd(SND_PR_VERBOSE,
"HDMI hot plug event: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
- codec->addr, pin_nid, pd, eldv);
+ codec->addr, pin_nid,
+ !!(res & AC_UNSOL_RES_PD), !!(res & AC_UNSOL_RES_ELDV));
pin_idx = pin_nid_to_pin_index(spec, pin_nid);
if (pin_idx < 0)
if (eld->monitor_present)
eld_valid = !!(present & AC_PINSENSE_ELDV);
- printk(KERN_INFO
+ _snd_printd(SND_PR_VERBOSE,
"HDMI status: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
codec->addr, pin_nid, eld->monitor_present, eld_valid);
* min : 0xFE : -115.0 dB
* mute: 0xFF
*/
-static const DECLARE_TLV_DB_SCALE(out_tlv, -11500, 50, 1);
+static const DECLARE_TLV_DB_SCALE(out_tlv, -11550, 50, 1);
static const struct snd_kcontrol_new ak4642_snd_controls[] = {
}
/*
- * using codec assist to small pop, hp_powerup or lineout_powerup
- * should stay setting until vag_powerup is fully ramped down,
- * vag fully ramped down require 400ms.
+ * As manual described, ADC/DAC only works when VAG powerup,
+ * So enabled VAG before ADC/DAC up.
+ * In power down case, we need wait 400ms when vag fully ramped down.
*/
-static int small_pop_event(struct snd_soc_dapm_widget *w,
+static int power_vag_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
switch (event) {
SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
break;
- case SND_SOC_DAPM_PRE_PMD:
+ case SND_SOC_DAPM_POST_PMD:
snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER,
SGTL5000_VAG_POWERUP, 0);
msleep(400);
mic_bias_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
- SND_SOC_DAPM_PGA_E("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0,
- small_pop_event,
- SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
- SND_SOC_DAPM_PGA_E("LO", SGTL5000_CHIP_ANA_POWER, 0, 0, NULL, 0,
- small_pop_event,
- SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
+ SND_SOC_DAPM_PGA("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("LO", SGTL5000_CHIP_ANA_POWER, 0, 0, NULL, 0),
SND_SOC_DAPM_MUX("Capture Mux", SND_SOC_NOPM, 0, 0, &adc_mux),
SND_SOC_DAPM_MUX("Headphone Mux", SND_SOC_NOPM, 0, 0, &dac_mux),
0, SGTL5000_CHIP_DIG_POWER,
1, 0),
- SND_SOC_DAPM_ADC("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0),
+ SND_SOC_DAPM_SUPPLY("VAG_POWER", SGTL5000_CHIP_ANA_POWER, 7, 0,
+ power_vag_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+ SND_SOC_DAPM_ADC("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0),
SND_SOC_DAPM_DAC("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0),
};
{"Capture Mux", "LINE_IN", "LINE_IN"}, /* line_in --> adc_mux */
{"Capture Mux", "MIC_IN", "MIC_IN"}, /* mic_in --> adc_mux */
+ {"ADC", NULL, "VAG_POWER"},
{"ADC", NULL, "Capture Mux"}, /* adc_mux --> adc */
{"AIFOUT", NULL, "ADC"}, /* adc --> i2s_out */
+ {"DAC", NULL, "VAG_POWER"},
{"DAC", NULL, "AIFIN"}, /* i2s-->dac,skip audio mux */
{"Headphone Mux", "DAC", "DAC"}, /* dac --> hp_mux */
{"LO", NULL, "DAC"}, /* dac --> line_out */
if (!buf)
return -ENOMEM;
+ if (!audmux_base)
+ return -ENOSYS;
+
if (audmux_clk)
clk_prepare_enable(audmux_clk);
return;
}
- for (i = 1; i < 8; i++) {
+ for (i = 0; i < MX31_AUDMUX_PORT6_SSI_PINS_6 + 1; i++) {
snprintf(buf, sizeof(buf), "ssi%d", i);
if (!debugfs_create_file(buf, 0444, audmux_debugfs_root,
(void *)i, &audmux_debugfs_fops))
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/initval.h>
snd_soc_dapm_new_controls(&platform->dapm,
driver->dapm_widgets, driver->num_dapm_widgets);
+ platform->dapm.idle_bias_off = 1;
+
if (driver->probe) {
ret = driver->probe(platform);
if (ret < 0) {
struct tegra_i2s *i2s = s->private;
int i;
+ clk_enable(i2s->clk_i2s);
+
for (i = 0; i < ARRAY_SIZE(regs); i++) {
u32 val = tegra_i2s_read(i2s, regs[i].offset);
seq_printf(s, "%s = %08x\n", regs[i].name, val);
}
+ clk_disable(i2s->clk_i2s);
+
return 0;
}
debugfs_remove(i2s->debug);
}
#else
-static inline void tegra_i2s_debug_add(struct tegra_i2s *i2s, int id)
+static inline void tegra_i2s_debug_add(struct tegra_i2s *i2s)
{
}
struct tegra_spdif *spdif = s->private;
int i;
+ clk_enable(spdif->clk_spdif_out);
+
for (i = 0; i < ARRAY_SIZE(regs); i++) {
u32 val = tegra_spdif_read(spdif, regs[i].offset);
seq_printf(s, "%s = %08x\n", regs[i].name, val);
}
+ clk_disable(spdif->clk_spdif_out);
+
return 0;
}
#include "util/debug.h"
#include <sys/prctl.h>
+#include <sys/resource.h>
#include <semaphore.h>
#include <pthread.h>
git.openpandora.org / pandora-kernel.git / commitdiff