- semantics and behavior of local atomic operations.
lockdep-design.txt
- documentation on the runtime locking correctness validator.
+lockup-watchdogs.txt
+ - info on soft and hard lockup detectors (aka nmi_watchdog).
logo.gif
- full colour GIF image of Linux logo (penguin - Tux).
logo.txt
- directory with information on the NetLabel subsystem.
networking/
- directory with info on various aspects of networking with Linux.
-nmi_watchdog.txt
- - info on NMI watchdog for SMP systems.
nommu-mmap.txt
- documentation about no-mmu memory mapping support.
numastat.txt
shared across all System Controller members.
TC/TCLIB Timer required properties:
-- compatible: Should be "atmel,<chip>-pit".
+- compatible: Should be "atmel,<chip>-tcb".
<chip> can be "at91rm9200" or "at91sam9x5"
- reg: Should contain registers location and length
- interrupts: Should contain all interrupts for the TC block
With some exceptions, these support nvidia,high-speed-mode,
nvidia,schmitt, nvidia,low-power-mode, nvidia,pull-down-strength,
- nvidia,pull-up-strength, nvidia,slew_rate-rising, nvidia,slew_rate-falling.
+ nvidia,pull-up-strength, nvidia,slew-rate-rising, nvidia,slew-rate-falling.
drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1, drive_cdev2,
drive_csus, drive_dap1, drive_dap2, drive_dap3, drive_dap4, drive_dbg,
drive groups:
These all support nvidia,pull-down-strength, nvidia,pull-up-strength,
- nvidia,slew_rate-rising, nvidia,slew_rate-falling. Most but not all
+ nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all
support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode.
ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, cec, crt, csus, dap1,
High level behavior (mixed):
============================
- kernel(driver): calls request_firmware(&fw_entry, $FIRMWARE, device)
-
- userspace:
+ 1), kernel(driver):
+ - calls request_firmware(&fw_entry, $FIRMWARE, device)
+ - kernel searchs the fimware image with name $FIRMWARE directly
+ in the below search path of root filesystem:
+ "/lib/firmware/updates/" UTS_RELEASE,
+ "/lib/firmware/updates",
+ "/lib/firmware/" UTS_RELEASE,
+ "/lib/firmware"
+ - If found, goto 7), else goto 2)
+
+ 2), userspace:
- /sys/class/firmware/xxx/{loading,data} appear.
- hotplug gets called with a firmware identifier in $FIRMWARE
and the usual hotplug environment.
- hotplug: echo 1 > /sys/class/firmware/xxx/loading
- kernel: Discard any previous partial load.
+ 3), kernel: Discard any previous partial load.
- userspace:
+ 4), userspace:
- hotplug: cat appropriate_firmware_image > \
/sys/class/firmware/xxx/data
- kernel: grows a buffer in PAGE_SIZE increments to hold the image as it
+ 5), kernel: grows a buffer in PAGE_SIZE increments to hold the image as it
comes in.
- userspace:
+ 6), userspace:
- hotplug: echo 0 > /sys/class/firmware/xxx/loading
- kernel: request_firmware() returns and the driver has the firmware
+ 7), kernel: request_firmware() returns and the driver has the firmware
image in fw_entry->{data,size}. If something went wrong
request_firmware() returns non-zero and fw_entry is set to
NULL.
- kernel(driver): Driver code calls release_firmware(fw_entry) releasing
+ 8), kernel(driver): Driver code calls release_firmware(fw_entry) releasing
the firmware image and any related resource.
High level behavior (driver code):
--- /dev/null
+Chinese translated version of Documentation/IRQ.txt
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly. However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help. Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Eric W. Biederman <ebiederman@xmission.com>
+Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+---------------------------------------------------------------------
+Documentation/IRQ.txt 的中文翻译
+
+如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
+交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题，请联系中文版维护者。
+英文版维护者： Eric W. Biederman <ebiederman@xmission.com>
+中文版维护者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版翻译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版校译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+
+
+以下为正文
+---------------------------------------------------------------------
+何为 IRQ?
+
+一个 IRQ 是来自某个设备的一个中断请求。目前，它们可以来自一个硬件引脚，
+或来自一个数据包。多个设备可能连接到同个硬件引脚，从而共享一个 IRQ。
+
+一个 IRQ 编号是用于告知硬件中断源的内核标识。通常情况下，这是一个
+全局 irq_desc 数组的索引，但是除了在 linux/interrupt.h 中的实现，
+具体的细节是体系结构特定的。
+
+一个 IRQ 编号是设备上某个可能的中断源的枚举。通常情况下，枚举的编号是
+该引脚在系统内中断控制器的所有输入引脚中的编号。对于 ISA 总线中的情况，
+枚举的是在两个 i8259 中断控制器中 16 个输入引脚。
+
+架构可以对 IRQ 编号指定额外的含义，在硬件涉及任何手工配置的情况下，
+是被提倡的。ISA 的 IRQ 是一个分配这类额外含义的典型例子。
--- /dev/null
+Chinese translated version of Documentation/arm64/booting.txt
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly. However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help. Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Will Deacon <will.deacon@arm.com>
+Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+---------------------------------------------------------------------
+Documentation/arm64/booting.txt 的中文翻译
+
+如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
+交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题，请联系中文版维护者。
+
+英文版维护者： Will Deacon <will.deacon@arm.com>
+中文版维护者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版翻译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版校译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+
+以下为正文
+---------------------------------------------------------------------
+ 启动 AArch64 Linux
+ ==================
+
+作者: Will Deacon <will.deacon@arm.com>
+日期: 2012 年 09 月 07 日
+
+本文档基于 Russell King 的 ARM 启动文档，且适用于所有公开发布的
+AArch64 Linux 内核代码。
+
+AArch64 异常模型由多个异常级别（EL0 - EL3）组成，对于 EL0 和 EL1
+异常级有对应的安全和非安全模式。EL2 是系统管理级，且仅存在于
+非安全模式下。EL3 是最高特权级，且仅存在于安全模式下。
+
+基于本文档的目的，我们将简单地使用‘引导装载程序’（‘boot loader’）
+这个术语来定义在将控制权交给 Linux 内核前 CPU 上执行的所有软件。
+这可能包含安全监控和系统管理代码，或者它可能只是一些用于准备最小启动
+环境的指令。
+
+基本上，引导装载程序（至少）应实现以下操作：
+
+1、设置和初始化 RAM
+2、设置设备树数据
+3、解压内核映像
+4、调用内核映像
+
+
+1、设置和初始化 RAM
+-----------------
+
+必要性: 强制
+
+引导装载程序应该找到并初始化系统中所有内核用于保持系统变量数据的 RAM。
+这个操作的执行是设备依赖的。（它可能使用内部算法来自动定位和计算所有
+RAM，或可能使用对这个设备已知的 RAM 信息，还可能使用任何引导装载程序
+设计者想到的匹配方法。）
+
+
+2、设置设备树数据
+---------------
+
+必要性: 强制
+
+设备树数据块（dtb）大小必须不大于 2 MB，且位于从内核映像起始算起第一个
+512MB 内的 2MB 边界上。这使得内核可以通过初始页表中的单个节描述符来
+映射此数据块。
+
+
+3、解压内核映像
+-------------
+
+必要性: 可选
+
+AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内核映像文件
+（比如 Image.gz），则需要通过引导装载程序（使用 gzip 等）来进行解压。
+若引导装载程序没有实现这个需求，就要使用非压缩内核映像文件。
+
+
+4、调用内核映像
+-------------
+
+必要性: 强制
+
+已解压的内核映像包含一个 32 字节的头，内容如下：
+
+ u32 magic = 0x14000008; /* 跳转到 stext, 小端 */
+ u32 res0 = 0; /* 保留 */
+ u64 text_offset; /* 映像装载偏移 */
+ u64 res1 = 0; /* 保留 */
+ u64 res2 = 0; /* 保留 */
+
+映像必须位于系统 RAM 起始处的特定偏移（当前是 0x80000）。系统 RAM
+的起始地址必须是以 2MB 对齐的。
+
+在跳转入内核前，必须符合以下状态：
+
+- 停止所有 DMA 设备，这样内存数据就不会因为虚假网络包或磁盘数据而
+ 被破坏。这可能可以节省你许多的调试时间。
+
+- 主 CPU 通用寄存器设置
+ x0 = 系统 RAM 中设备树数据块（dtb）的物理地址。
+ x1 = 0 (保留，将来可能使用)
+ x2 = 0 (保留，将来可能使用)
+ x3 = 0 (保留，将来可能使用)
+
+- CPU 模式
+ 所有形式的中断必须在 PSTATE.DAIF 中被屏蔽（Debug、SError、IRQ
+ 和 FIQ）。
+ CPU 必须处于 EL2（推荐，可访问虚拟化扩展）或非安全 EL1 模式下。
+
+- 高速缓存、MMU
+ MMU 必须关闭。
+ 指令缓存开启或关闭都可以。
+ 数据缓存必须关闭且无效。
+ 外部高速缓存（如果存在）必须配置并禁用。
+
+- 架构计时器
+ CNTFRQ 必须设定为计时器的频率。
+ 如果在 EL1 模式下进入内核，则 CNTHCTL_EL2 中的 EL1PCTEN (bit 0)
+ 必须置位。
+
+- 一致性
+ 通过内核启动的所有 CPU 在内核入口地址上必须处于相同的一致性域中。
+ 这可能要根据具体实现来定义初始化过程，以使能每个CPU上对维护操作的
+ 接收。
+
+- 系统寄存器
+ 在进入内核映像的异常级中，所有构架中可写的系统寄存器必须通过软件
+ 在一个更高的异常级别下初始化，以防止在 未知 状态下运行。
+
+引导装载程序必须在每个 CPU 处于以下状态时跳入内核入口：
+
+- 主 CPU 必须直接跳入内核映像的第一条指令。通过此 CPU 传递的设备树
+ 数据块必须在每个 CPU 节点中包含以下内容：
+
+ 1、‘enable-method’属性。目前，此字段支持的值仅为字符串“spin-table”。
+
+ 2、‘cpu-release-addr’标识一个 64-bit、初始化为零的内存位置。
+
+ 引导装载程序必须生成这些设备树属性，并在跳入内核入口之前将其插入
+ 数据块。
+
+- 任何辅助 CPU 必须在内存保留区（通过设备树中的 /memreserve/ 域传递
+ 给内核）中自旋于内核之外，轮询它们的 cpu-release-addr 位置（必须
+ 包含在保留区中）。可通过插入 wfe 指令来降低忙循环开销，而主 CPU 将
+ 发出 sev 指令。当对 cpu-release-addr 所指位置的读取操作返回非零值
+ 时，CPU 必须直接跳入此值所指向的地址。
+
+- 辅助 CPU 通用寄存器设置
+ x0 = 0 (保留，将来可能使用)
+ x1 = 0 (保留，将来可能使用)
+ x2 = 0 (保留，将来可能使用)
+ x3 = 0 (保留，将来可能使用)
--- /dev/null
+Chinese translated version of Documentation/arm64/memory.txt
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly. However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help. Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Catalin Marinas <catalin.marinas@arm.com>
+Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+---------------------------------------------------------------------
+Documentation/arm64/memory.txt 的中文翻译
+
+如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
+交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题，请联系中文版维护者。
+
+英文版维护者： Catalin Marinas <catalin.marinas@arm.com>
+中文版维护者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版翻译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版校译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+
+以下为正文
+---------------------------------------------------------------------
+ Linux 在 AArch64 中的内存布局
+ ===========================
+
+作者: Catalin Marinas <catalin.marinas@arm.com>
+日期: 2012 年 02 月 20 日
+
+本文档描述 AArch64 Linux 内核所使用的虚拟内存布局。此构架可以实现
+页大小为 4KB 的 4 级转换表和页大小为 64KB 的 3 级转换表。
+
+AArch64 Linux 使用页大小为 4KB 的 3 级转换表配置，对于用户和内核
+都有 39-bit (512GB) 的虚拟地址空间。对于页大小为 64KB的配置，仅
+使用 2 级转换表，但内存布局相同。
+
+用户地址空间的 63:39 位为 0，而内核地址空间的相应位为 1。TTBRx 的
+选择由虚拟地址的 63 位给出。swapper_pg_dir 仅包含内核（全局）映射，
+而用户 pgd 仅包含用户（非全局）映射。swapper_pgd_dir 地址被写入
+TTBR1 中，且从不写入 TTBR0。
+
+
+AArch64 Linux 内存布局：
+
+起始地址 结束地址 大小 用途
+-----------------------------------------------------------------------
+0000000000000000 0000007fffffffff 512GB 用户空间
+
+ffffff8000000000 ffffffbbfffcffff ~240GB vmalloc
+
+ffffffbbfffd0000 ffffffbcfffdffff 64KB [防护页]
+
+ffffffbbfffe0000 ffffffbcfffeffff 64KB PCI I/O 空间
+
+ffffffbbffff0000 ffffffbcffffffff 64KB [防护页]
+
+ffffffbc00000000 ffffffbdffffffff 8GB vmemmap
+
+ffffffbe00000000 ffffffbffbffffff ~8GB [防护页，未来用于 vmmemap]
+
+ffffffbffc000000 ffffffbfffffffff 64MB 模块
+
+ffffffc000000000 ffffffffffffffff 256GB 内存空间
+
+
+4KB 页大小的转换表查找：
+
++--------+--------+--------+--------+--------+--------+--------+--------+
+|63 56|55 48|47 40|39 32|31 24|23 16|15 8|7 0|
++--------+--------+--------+--------+--------+--------+--------+--------+
+ | | | | | |
+ | | | | | v
+ | | | | | [11:0] 页内偏移
+ | | | | +-> [20:12] L3 索引
+ | | | +-----------> [29:21] L2 索引
+ | | +---------------------> [38:30] L1 索引
+ | +-------------------------------> [47:39] L0 索引 (未使用)
+ +-------------------------------------------------> [63] TTBR0/1
+
+
+64KB 页大小的转换表查找：
+
++--------+--------+--------+--------+--------+--------+--------+--------+
+|63 56|55 48|47 40|39 32|31 24|23 16|15 8|7 0|
++--------+--------+--------+--------+--------+--------+--------+--------+
+ | | | | |
+ | | | | v
+ | | | | [15:0] 页内偏移
+ | | | +----------> [28:16] L3 索引
+ | | +--------------------------> [41:29] L2 索引 (仅使用 38:29 )
+ | +-------------------------------> [47:42] L1 索引 (未使用)
+ +-------------------------------------------------> [63] TTBR0/1
S: Maintained
F: arch/arm/
+ARM SUB-ARCHITECTURES
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: MAINTAINED
+F: arch/arm/mach-*/
+F: arch/arm/plat-*/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
+
ARM PRIMECELL AACI PL041 DRIVER
M: Russell King <linux@arm.linux.org.uk>
S: Maintained
EXTENSIBLE FIRMWARE INTERFACE (EFI)
M: Matt Fleming <matt.fleming@intel.com>
L: linux-efi@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi.git
S: Maintained
F: Documentation/x86/efi-stub.txt
F: arch/ia64/kernel/efi.c
S: Odd Fixes
F: drivers/net/
F: include/linux/if_*
-F: include/linux/*device.h
+F: include/linux/netdevice.h
+F: include/linux/arcdevice.h
+F: include/linux/etherdevice.h
+F: include/linux/fcdevice.h
+F: include/linux/fddidevice.h
+F: include/linux/hippidevice.h
+F: include/linux/inetdevice.h
NETXEN (1/10) GbE SUPPORT
M: Sony Chacko <sony.chacko@qlogic.com>
VERSION = 3
PATCHLEVEL = 7
SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
NAME = Terrified Chipmunk
# *DOCUMENTATION*
#include <asm/processor.h>
#include <asm/types.h>
#include <asm/hwrpb.h>
+#include <asm/sysinfo.h>
#endif
#ifndef __ASSEMBLY__
mm_segment_t addr_limit; /* thread address space */
unsigned cpu; /* current CPU */
int preempt_count; /* 0 => preemptable, <0 => BUG */
+ unsigned int status; /* thread-synchronous flags */
int bpt_nsaved;
unsigned long bpt_addr[2]; /* breakpoint handling */
* - these are process state flags and used from assembly
* - pending work-to-be-done flags come first and must be assigned to be
* within bits 0 to 7 to fit in and immediate operand.
- * - ALPHA_UAC_SHIFT below must be kept consistent with the unaligned
- * control flags.
*
* TIF_SYSCALL_TRACE is known to be 0 via blbs.
*/
#define TIF_NOTIFY_RESUME 1 /* callback before returning to user */
#define TIF_SIGPENDING 2 /* signal pending */
#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
-#define TIF_POLLING_NRFLAG 8 /* poll_idle is polling NEED_RESCHED */
#define TIF_DIE_IF_KERNEL 9 /* dik recursion lock */
-#define TIF_UAC_NOPRINT 10 /* ! Preserve sequence of following */
-#define TIF_UAC_NOFIX 11 /* ! flags as they match */
-#define TIF_UAC_SIGBUS 12 /* ! userspace part of 'osf_sysinfo' */
#define TIF_MEMDIE 13 /* is terminating due to OOM killer */
-#define TIF_RESTORE_SIGMASK 14 /* restore signal mask in do_signal */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
-#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
/* Work to do on interrupt/exception return. */
#define _TIF_ALLWORK_MASK (_TIF_WORK_MASK \
| _TIF_SYSCALL_TRACE)
-#define ALPHA_UAC_SHIFT TIF_UAC_NOPRINT
-#define ALPHA_UAC_MASK (1 << TIF_UAC_NOPRINT | 1 << TIF_UAC_NOFIX | \
- 1 << TIF_UAC_SIGBUS)
+#define TS_UAC_NOPRINT 0x0001 /* ! Preserve the following three */
+#define TS_UAC_NOFIX 0x0002 /* ! flags as they match */
+#define TS_UAC_SIGBUS 0x0004 /* ! userspace part of 'osf_sysinfo' */
+#define TS_RESTORE_SIGMASK 0x0008 /* restore signal mask in do_signal() */
+#define TS_POLLING 0x0010 /* idle task polling need_resched,
+ skip sending interrupt */
-#define SET_UNALIGN_CTL(task,value) ({ \
- task_thread_info(task)->flags = ((task_thread_info(task)->flags & \
- ~ALPHA_UAC_MASK) \
- | (((value) << ALPHA_UAC_SHIFT) & (1<<TIF_UAC_NOPRINT))\
- | (((value) << (ALPHA_UAC_SHIFT + 1)) & (1<<TIF_UAC_SIGBUS)) \
- | (((value) << (ALPHA_UAC_SHIFT - 1)) & (1<<TIF_UAC_NOFIX)));\
+#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK 1
+static inline void set_restore_sigmask(void)
+{
+ struct thread_info *ti = current_thread_info();
+ ti->status |= TS_RESTORE_SIGMASK;
+ WARN_ON(!test_bit(TIF_SIGPENDING, (unsigned long *)&ti->flags));
+}
+static inline void clear_restore_sigmask(void)
+{
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+}
+static inline bool test_restore_sigmask(void)
+{
+ return current_thread_info()->status & TS_RESTORE_SIGMASK;
+}
+static inline bool test_and_clear_restore_sigmask(void)
+{
+ struct thread_info *ti = current_thread_info();
+ if (!(ti->status & TS_RESTORE_SIGMASK))
+ return false;
+ ti->status &= ~TS_RESTORE_SIGMASK;
+ return true;
+}
+#endif
+
+#define SET_UNALIGN_CTL(task,value) ({ \
+ __u32 status = task_thread_info(task)->status & ~UAC_BITMASK; \
+ if (value & PR_UNALIGN_NOPRINT) \
+ status |= TS_UAC_NOPRINT; \
+ if (value & PR_UNALIGN_SIGBUS) \
+ status |= TS_UAC_SIGBUS; \
+ if (value & 4) /* alpha-specific */ \
+ status |= TS_UAC_NOFIX; \
+ task_thread_info(task)->status = status; \
0; })
#define GET_UNALIGN_CTL(task,value) ({ \
- put_user((task_thread_info(task)->flags & (1 << TIF_UAC_NOPRINT))\
- >> ALPHA_UAC_SHIFT \
- | (task_thread_info(task)->flags & (1 << TIF_UAC_SIGBUS))\
- >> (ALPHA_UAC_SHIFT + 1) \
- | (task_thread_info(task)->flags & (1 << TIF_UAC_NOFIX))\
- >> (ALPHA_UAC_SHIFT - 1), \
- (int __user *)(value)); \
+ __u32 status = task_thread_info(task)->status & ~UAC_BITMASK; \
+ __u32 res = 0; \
+ if (status & TS_UAC_NOPRINT) \
+ res |= PR_UNALIGN_NOPRINT; \
+ if (status & TS_UAC_SIGBUS) \
+ res |= PR_UNALIGN_SIGBUS; \
+ if (status & TS_UAC_NOFIX) \
+ res |= 4; \
+ put_user(res, (int __user *)(value)); \
})
-#define tsk_is_polling(t) test_tsk_thread_flag(t, TIF_POLLING_NRFLAG)
-
#endif /* __KERNEL__ */
#endif /* _ALPHA_THREAD_INFO_H */
case GSI_UACPROC:
if (nbytes < sizeof(unsigned int))
return -EINVAL;
- w = (current_thread_info()->flags >> ALPHA_UAC_SHIFT) &
- UAC_BITMASK;
+ w = current_thread_info()->status & UAC_BITMASK;
if (put_user(w, (unsigned int __user *)buffer))
return -EFAULT;
return 1;
break;
case SSI_NVPAIRS: {
- unsigned long v, w, i;
- unsigned int old, new;
+ unsigned __user *p = buffer;
+ unsigned i;
- for (i = 0; i < nbytes; ++i) {
+ for (i = 0, p = buffer; i < nbytes; ++i, p += 2) {
+ unsigned v, w, status;
- if (get_user(v, 2*i + (unsigned int __user *)buffer))
- return -EFAULT;
- if (get_user(w, 2*i + 1 + (unsigned int __user *)buffer))
+ if (get_user(v, p) || get_user(w, p + 1))
return -EFAULT;
switch (v) {
case SSIN_UACPROC:
- again:
- old = current_thread_info()->flags;
- new = old & ~(UAC_BITMASK << ALPHA_UAC_SHIFT);
- new = new | (w & UAC_BITMASK) << ALPHA_UAC_SHIFT;
- if (cmpxchg(¤t_thread_info()->flags,
- old, new) != old)
- goto again;
+ w &= UAC_BITMASK;
+ status = current_thread_info()->status;
+ status = (status & ~UAC_BITMASK) | w;
+ current_thread_info()->status = status;
break;
default:
void
cpu_idle(void)
{
- set_thread_flag(TIF_POLLING_NRFLAG);
+ current_thread_info()->status |= TS_POLLING;
while (1) {
/* FIXME -- EV6 and LCA45 know how to power down
/* Check the UAC bits to decide what the user wants us to do
with the unaliged access. */
- if (!test_thread_flag (TIF_UAC_NOPRINT)) {
+ if (!(current_thread_info()->status & TS_UAC_NOPRINT)) {
if (__ratelimit(&ratelimit)) {
printk("%s(%d): unaligned trap at %016lx: %p %lx %ld\n",
current->comm, task_pid_nr(current),
regs->pc - 4, va, opcode, reg);
}
}
- if (test_thread_flag (TIF_UAC_SIGBUS))
+ if ((current_thread_info()->status & TS_UAC_SIGBUS))
goto give_sigbus;
/* Not sure why you'd want to use this, but... */
- if (test_thread_flag (TIF_UAC_NOFIX))
+ if ((current_thread_info()->status & TS_UAC_NOFIX))
return;
/* Don't bother reading ds in the access check since we already
default "4"
config HOTPLUG_CPU
- bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
- depends on SMP && HOTPLUG && EXPERIMENTAL
+ bool "Support for hot-pluggable CPUs"
+ depends on SMP && HOTPLUG
help
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
default 100
config THUMB2_KERNEL
- bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)"
- depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL
+ bool "Compile the kernel in Thumb-2 mode"
+ depends on CPU_V7 && !CPU_V6 && !CPU_V6K
select AEABI
select ARM_ASM_UNIFIED
select ARM_UNWIND
config XEN
bool "Xen guest support on ARM (EXPERIMENTAL)"
depends on EXPERIMENTAL && ARM && OF
+ depends on CPU_V7 && !CPU_V6
help
Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
OBJCOPYFLAGS :=-O binary -R .comment -S
GZFLAGS :=-9
#KBUILD_CFLAGS +=-pipe
-# Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb:
-KBUILD_CFLAGS +=$(call cc-option,-marm,)
# Never generate .eh_frame
KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm)
ifeq ($(CONFIG_THUMB2_KERNEL),y)
AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it)
AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
-CFLAGS_THUMB2 :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
-AFLAGS_THUMB2 :=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
+CFLAGS_ISA :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
+AFLAGS_ISA :=$(CFLAGS_ISA) -Wa$(comma)-mthumb
# Work around buggy relocation from gas if requested:
ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y)
CFLAGS_MODULE +=-fno-optimize-sibling-calls
endif
+else
+CFLAGS_ISA :=$(call cc-option,-marm,)
+AFLAGS_ISA :=$(CFLAGS_ISA)
endif
# Need -Uarm for gcc < 3.x
-KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_THUMB2) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_THUMB2) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
+KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
+KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
CHECKFLAGS += -D__arm__
$(obj)/xipImage: vmlinux FORCE
$(call if_changed,objcopy)
- @echo ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
+ $(kecho) ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
$(obj)/Image $(obj)/zImage: FORCE
@echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)'
$(obj)/Image: vmlinux FORCE
$(call if_changed,objcopy)
- @echo ' Kernel: $@ is ready'
+ $(kecho) ' Kernel: $@ is ready'
$(obj)/compressed/vmlinux: $(obj)/Image FORCE
$(Q)$(MAKE) $(build)=$(obj)/compressed $@
$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
$(call if_changed,objcopy)
- @echo ' Kernel: $@ is ready'
+ $(kecho) ' Kernel: $@ is ready'
endif
$(obj)/uImage: $(obj)/zImage FORCE
@$(check_for_multiple_loadaddr)
$(call if_changed,uimage)
- @echo ' Image $@ is ready'
+ $(kecho) ' Image $@ is ready'
$(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
$(Q)$(MAKE) $(build)=$(obj)/bootp $@
$(obj)/bootpImage: $(obj)/bootp/bootp FORCE
$(call if_changed,objcopy)
- @echo ' Kernel: $@ is ready'
+ $(kecho) ' Kernel: $@ is ready'
PHONY += initrd FORCE
initrd:
#size-cells = <0>;
btn3 {
- label = "Buttin 3";
+ label = "Button 3";
gpios = <&pioA 30 1>;
linux,code = <0x103>;
gpio-key,wakeup;
};
btn4 {
- label = "Buttin 4";
+ label = "Button 4";
gpios = <&pioA 31 1>;
linux,code = <0x104>;
gpio-key,wakeup;
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80004000 0x1000>;
interrupts = <0 21 0x4>;
+ arm,primecell-periphid = <0x180024>;
+
#address-cells = <1>;
#size-cells = <0>;
v-i2c-supply = <&db8500_vape_reg>;
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80122000 0x1000>;
interrupts = <0 22 0x4>;
+ arm,primecell-periphid = <0x180024>;
+
#address-cells = <1>;
#size-cells = <0>;
v-i2c-supply = <&db8500_vape_reg>;
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80128000 0x1000>;
interrupts = <0 55 0x4>;
+ arm,primecell-periphid = <0x180024>;
+
#address-cells = <1>;
#size-cells = <0>;
v-i2c-supply = <&db8500_vape_reg>;
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80110000 0x1000>;
interrupts = <0 12 0x4>;
+ arm,primecell-periphid = <0x180024>;
+
#address-cells = <1>;
#size-cells = <0>;
v-i2c-supply = <&db8500_vape_reg>;
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x8012a000 0x1000>;
interrupts = <0 51 0x4>;
+ arm,primecell-periphid = <0x180024>;
+
#address-cells = <1>;
#size-cells = <0>;
v-i2c-supply = <&db8500_vape_reg>;
interrupts = <0 60 0x4>;
status = "disabled";
};
+
sdi@80118000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80118000 0x1000>;
interrupts = <0 50 0x4>;
status = "disabled";
};
+
sdi@80005000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80005000 0x1000>;
interrupts = <0 41 0x4>;
status = "disabled";
};
+
sdi@80119000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80119000 0x1000>;
interrupts = <0 59 0x4>;
status = "disabled";
};
+
sdi@80114000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80114000 0x1000>;
interrupts = <0 99 0x4>;
status = "disabled";
};
+
sdi@80008000 {
compatible = "arm,pl18x", "arm,primecell";
- reg = <0x80114000 0x1000>;
+ reg = <0x80008000 0x1000>;
interrupts = <0 100 0x4>;
status = "disabled";
};
compatible = "samsung,trats", "samsung,exynos4210";
memory {
- reg = <0x40000000 0x20000000
- 0x60000000 0x20000000>;
+ reg = <0x40000000 0x10000000
+ 0x50000000 0x10000000
+ 0x60000000 0x10000000
+ 0x70000000 0x10000000>;
};
chosen {
interrupts = <13>, <56>;
interrupt-names = "gpmi-dma", "bch";
clocks = <&clks 34>;
+ clock-names = "gpmi_io";
fsl,gpmi-dma-channel = <4>;
status = "disabled";
};
interrupts = <88>, <41>;
interrupt-names = "gpmi-dma", "bch";
clocks = <&clks 50>;
+ clock-names = "gpmi_io";
fsl,gpmi-dma-channel = <4>;
status = "disabled";
};
interrupt-names = "common", "tx", "rx", "sidetone";
interrupt-parent = <&intc>;
ti,buffer-size = <1280>;
- ti,hwmods = "mcbsp2";
+ ti,hwmods = "mcbsp2", "mcbsp2_sidetone";
};
mcbsp3: mcbsp@49024000 {
interrupt-names = "common", "tx", "rx", "sidetone";
interrupt-parent = <&intc>;
ti,buffer-size = <128>;
- ti,hwmods = "mcbsp3";
+ ti,hwmods = "mcbsp3", "mcbsp3_sidetone";
};
mcbsp4: mcbsp@49026000 {
CONFIG_SPI=y
CONFIG_SPI_IMX=y
CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_MC9S08DZ60=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_IMX2_WDT=y
CONFIG_SOC_CAMERA_OV2640=y
CONFIG_VIDEO_MX3=y
CONFIG_FB=y
+CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_MVEBU=y
-CONFIG_MACH_ARMADA_370_XP=y
+CONFIG_MACH_ARMADA_370=y
+CONFIG_MACH_ARMADA_XP=y
+# CONFIG_CACHE_L2X0 is not set
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
-CONFIG_USE_OF=y
+# CONFIG_COMPACTION is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_ARCH_VERSATILE=y
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
-#define flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp)
+#define flat_get_addr_from_rp(rp, relval, flags, persistent) ((void)persistent,get_unaligned(rp))
#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp)
#define flat_get_relocate_addr(rel) (rel)
#define flat_set_persistent(relval, p) 0
#define USER_DS KERNEL_DS
#define segment_eq(a,b) (1)
-#define __addr_ok(addr) (1)
-#define __range_ok(addr,size) (0)
+#define __addr_ok(addr) ((void)(addr),1)
+#define __range_ok(addr,size) ((void)(addr),0)
#define get_fs() (KERNEL_DS)
static inline void set_fs(mm_segment_t fs)
#ifndef __ASSEMBLY__
/* Explicitly size integers that represent pfns in the interface with
- * Xen so that we can have one ABI that works for 32 and 64 bit guests. */
+ * Xen so that we can have one ABI that works for 32 and 64 bit guests.
+ * Note that this means that the xen_pfn_t type may be capable of
+ * representing pfn's which the guest cannot represent in its own pfn
+ * type. However since pfn space is controlled by the guest this is
+ * fine since it simply wouldn't be able to create any sure pfns in
+ * the first place.
+ */
typedef uint64_t xen_pfn_t;
+#define PRI_xen_pfn "llx"
typedef uint64_t xen_ulong_t;
+#define PRI_xen_ulong "llx"
/* Guest handles for primitive C types. */
__DEFINE_GUEST_HANDLE(uchar, unsigned char);
__DEFINE_GUEST_HANDLE(uint, unsigned int);
-__DEFINE_GUEST_HANDLE(ulong, unsigned long);
DEFINE_GUEST_HANDLE(char);
DEFINE_GUEST_HANDLE(int);
-DEFINE_GUEST_HANDLE(long);
DEFINE_GUEST_HANDLE(void);
DEFINE_GUEST_HANDLE(uint64_t);
DEFINE_GUEST_HANDLE(uint32_t);
#include <xen/interface/grant_table.h>
#define pfn_to_mfn(pfn) (pfn)
-#define phys_to_machine_mapping_valid (1)
+#define phys_to_machine_mapping_valid(pfn) (1)
#define mfn_to_pfn(mfn) (mfn)
#define mfn_to_virt(m) (__va(mfn_to_pfn(m) << PAGE_SHIFT))
#define XMADDR(x) ((xmaddr_t) { .maddr = (x) })
#define XPADDR(x) ((xpaddr_t) { .paddr = (x) })
+#define INVALID_P2M_ENTRY (~0UL)
+
static inline xmaddr_t phys_to_machine(xpaddr_t phys)
{
unsigned offset = phys.paddr & ~PAGE_MASK;
return 0;
}
+static inline bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+{
+ BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY);
+ return true;
+}
+
static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn)
{
- BUG();
- return false;
+ return __set_phys_to_machine(pfn, mfn);
}
#endif /* _ASM_ARM_XEN_PAGE_H */
--- /dev/null
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit
+ * accesses to the 8250.
+ */
+
+#include <linux/serial_reg.h>
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #UART_TX << UART_SHIFT]
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT]
+ and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ bne 1002b
+ .endm
+
+ /* The UART's don't have any flow control IO's wired up. */
+ .macro waituart,rd,rx
+ .endm
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit
- * accesses to the 8250.
*/
-#include <linux/serial_reg.h>
#define UART_SHIFT 2
#define PICOXCELL_UART1_BASE 0x80230000
ldr \rp, =PICOXCELL_UART1_BASE
.endm
- .macro senduart,rd,rx
- str \rd, [\rx, #UART_TX << UART_SHIFT]
- .endm
-
- .macro busyuart,rd,rx
-1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT]
- and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
- teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
- bne 1002b
- .endm
-
- /* The UART's don't have any flow control IO's wired up. */
- .macro waituart,rd,rx
- .endm
+#include "8250_32.S"
* published by the Free Software Foundation.
*/
+#define UART_SHIFT 2
+#define DEBUG_LL_UART_OFFSET 0x00002000
+
.macro addruart, rp, rv, tmp
mov \rp, #DEBUG_LL_UART_OFFSET
orr \rp, \rp, #0x00c00000
orr \rp, \rp, #0xff000000 @ physical base
.endm
+#include "8250_32.S"
+
#include <linux/list.h>
#include <linux/kallsyms.h>
#include <linux/proc_fs.h>
+#include <linux/export.h>
#include <asm/exception.h>
#include <asm/mach/arch.h>
/* Order is clear bits in "clr" then set bits in "set" */
irq_modify_status(irq, clr, set & ~clr);
}
+EXPORT_SYMBOL_GPL(set_irq_flags);
void __init init_IRQ(void)
{
TEST_UNSUPPORTED(".word 0xe04f0392 @ umaal r0, pc, r2, r3")
TEST_UNSUPPORTED(".word 0xe0500090 @ undef")
TEST_UNSUPPORTED(".word 0xe05fff9f @ undef")
+#endif
+#if __LINUX_ARM_ARCH__ >= 7
TEST_RRR( "mls r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
TEST_RRR( "mlshi r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
TEST_RR( "mls lr, r",1, VAL2,", r",2, VAL3,", r13")
TEST_UNSUPPORTED(".word 0xe1700090") /* Unallocated space */
#if __LINUX_ARM_ARCH__ >= 6
TEST_UNSUPPORTED("ldrex r2, [sp]")
+#endif
+#if (__LINUX_ARM_ARCH__ >= 7) || defined(CONFIG_CPU_32v6K)
TEST_UNSUPPORTED("strexd r0, r2, r3, [sp]")
TEST_UNSUPPORTED("ldrexd r2, r3, [sp]")
TEST_UNSUPPORTED("strexb r0, r2, [sp]")
for (i = 0; i < image->nr_segments; i++) {
current_segment = &image->segment[i];
- err = memblock_is_region_memory(current_segment->mem,
- current_segment->memsz);
- if (err)
- return - EINVAL;
+ if (!memblock_is_region_memory(current_segment->mem,
+ current_segment->memsz))
+ return -EINVAL;
err = get_user(header, (__be32*)current_segment->buf);
if (err)
s64 period = hwc->sample_period;
int ret = 0;
+ /* The period may have been changed by PERF_EVENT_IOC_PERIOD */
+ if (unlikely(period != hwc->last_period))
+ left = period - (hwc->last_period - left);
+
if (unlikely(left <= -period)) {
left = period;
local64_set(&hwc->period_left, left);
asmlinkage void __cpuinit secondary_start_kernel(void)
{
struct mm_struct *mm = &init_mm;
- unsigned int cpu = smp_processor_id();
+ unsigned int cpu;
+
+ /*
+ * The identity mapping is uncached (strongly ordered), so
+ * switch away from it before attempting any exclusive accesses.
+ */
+ cpu_switch_mm(mm->pgd, mm);
+ enter_lazy_tlb(mm, current);
+ local_flush_tlb_all();
/*
* All kernel threads share the same mm context; grab a
* reference and switch to it.
*/
+ cpu = smp_processor_id();
atomic_inc(&mm->mm_count);
current->active_mm = mm;
cpumask_set_cpu(cpu, mm_cpumask(mm));
- cpu_switch_mm(mm->pgd, mm);
- enter_lazy_tlb(mm, current);
- local_flush_tlb_all();
printk("CPU%u: Booted secondary processor\n", cpu);
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- /* timer load already set up */
ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
| TWD_TIMER_CONTROL_PERIODIC;
- __raw_writel(twd_timer_rate / HZ, twd_base + TWD_TIMER_LOAD);
+ __raw_writel(DIV_ROUND_CLOSEST(twd_timer_rate, HZ),
+ twd_base + TWD_TIMER_LOAD);
break;
case CLOCK_EVT_MODE_ONESHOT:
/* period set, and timer enabled in 'next_event' hook */
*timer_val = delay_timer->read_current_timer();
return 0;
}
+EXPORT_SYMBOL_GPL(read_current_timer);
static void __timer_delay(unsigned long cycles)
{
bool
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
menu "Atmel AT91 System-on-Chip"
comment "Atmel AT91 Processor"
-config SOC_AT91SAM9
- bool
- select AT91_SAM9_SMC
- select AT91_SAM9_TIME
- select CPU_ARM926T
- select MULTI_IRQ_HANDLER
- select SPARSE_IRQ
-
config SOC_AT91RM9200
bool "AT91RM9200"
select CPU_ARM920T
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200", &twi_clk),
+ CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200.0", &twi_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
static struct platform_device at91rm9200_twi_device = {
.name = "i2c-gpio",
- .id = -1,
+ .id = 0,
.dev.platform_data = &pdata,
};
static struct platform_device at91rm9200_twi_device = {
.name = "i2c-at91rm9200",
- .id = -1,
+ .id = 0,
.resource = twi_resources,
.num_resources = ARRAY_SIZE(twi_resources),
};
CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20", &twi_clk),
+ CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk),
+ CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi_clk),
/* more usart lookup table for DT entries */
CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
static struct platform_device at91sam9260_twi_device = {
.name = "i2c-gpio",
- .id = -1,
+ .id = 0,
.dev.platform_data = &pdata,
};
};
static struct platform_device at91sam9260_twi_device = {
- .id = -1,
+ .id = 0,
.resource = twi_resources,
.num_resources = ARRAY_SIZE(twi_resources),
};
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261", &twi_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10", &twi_clk),
+ CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261.0", &twi_clk),
+ CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
CLKDEV_CON_ID("pioB", &pioB_clk),
CLKDEV_CON_ID("pioC", &pioC_clk),
static struct platform_device at91sam9261_twi_device = {
.name = "i2c-gpio",
- .id = -1,
+ .id = 0,
.dev.platform_data = &pdata,
};
};
static struct platform_device at91sam9261_twi_device = {
- .id = -1,
+ .id = 0,
.resource = twi_resources,
.num_resources = ARRAY_SIZE(twi_resources),
};
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk),
+ CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
static struct platform_device at91sam9263_twi_device = {
.name = "i2c-gpio",
- .id = -1,
+ .id = 0,
.dev.platform_data = &pdata,
};
static struct platform_device at91sam9263_twi_device = {
.name = "i2c-at91sam9260",
- .id = -1,
+ .id = 0,
.resource = twi_resources,
.num_resources = ARRAY_SIZE(twi_resources),
};
static struct platform_device at91sam9rl_twi_device = {
.name = "i2c-gpio",
- .id = -1,
+ .id = 0,
.dev.platform_data = &pdata,
};
static struct platform_device at91sam9rl_twi_device = {
.name = "i2c-at91sam9g20",
- .id = -1,
+ .id = 0,
.resource = twi_resources,
.num_resources = ARRAY_SIZE(twi_resources),
};
if (!priority)
priority = at91x40_default_irq_priority;
- at91_aic_init(priority);
+ at91_aic_init(priority, at91_extern_irq);
}
.max_speed_hz = 125000 * 16,
.bus_num = 0,
.platform_data = &ads_info,
- .irq = AT91SAM9263_ID_IRQ1,
+ .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1,
},
#endif
};
.max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
.bus_num = 0,
.platform_data = &ads_info,
- .irq = AT91SAM9261_ID_IRQ0,
+ .irq = NR_IRQS_LEGACY + AT91SAM9261_ID_IRQ0,
.controller_data = (void *) AT91_PIN_PA28, /* CS pin */
},
#endif
.max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
.bus_num = 0,
.platform_data = &ads_info,
- .irq = AT91SAM9263_ID_IRQ1,
+ .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1,
},
#endif
};
extern void __init at91_init_irq_default(void);
extern void __init at91_init_interrupts(unsigned int priority[]);
extern void __init at91x40_init_interrupts(unsigned int priority[]);
-extern void __init at91_aic_init(unsigned int priority[]);
+extern void __init at91_aic_init(unsigned int priority[],
+ unsigned int ext_irq_mask);
extern int __init at91_aic_of_init(struct device_node *node,
struct device_node *parent);
extern int __init at91_aic5_of_init(struct device_node *node,
/*
* Initialize the AIC interrupt controller.
*/
-void __init at91_aic_init(unsigned int *priority)
+void __init at91_aic_init(unsigned int *priority, unsigned int ext_irq_mask)
{
unsigned int i;
int irq_base;
- if (at91_aic_pm_init())
+ at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs)
+ * sizeof(*at91_extern_irq), GFP_KERNEL);
+
+ if (at91_aic_pm_init() || at91_extern_irq == NULL)
panic("Unable to allocate bit maps\n");
+ *at91_extern_irq = ext_irq_mask;
+
at91_aic_base = ioremap(AT91_AIC, 512);
if (!at91_aic_base)
panic("Unable to ioremap AIC registers\n");
void __init at91_init_interrupts(unsigned int *priority)
{
/* Initialize the AIC interrupt controller */
- at91_aic_init(priority);
+ at91_aic_init(priority, at91_extern_irq);
/* Enable GPIO interrupts */
at91_gpio_irq_setup();
}
/* at91sam9g10 */
- if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
+ if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
at91_soc_initdata.type = AT91_SOC_SAM9G10;
at91_boot_soc = at91sam9261_soc;
}
#include <plat/fimc-core.h>
#include <plat/iic-core.h>
#include <plat/tv-core.h>
+#include <plat/spi-core.h>
#include <plat/regs-serial.h>
#include "common.h"
s5p_fb_setname(0, "exynos4-fb");
s5p_hdmi_setname("exynos4-hdmi");
+
+ s3c64xx_spi_setname("exynos4210-spi");
}
static void __init exynos5_map_io(void)
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
s3c_i2c2_setname("s3c2440-i2c");
+
+ s3c64xx_spi_setname("exynos4210-spi");
}
static void __init exynos4_init_clocks(int xtal)
DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = exynos4_dt_map_io,
.handle_irq = gic_handle_irq,
busy->div.hw.init = &init;
clk = clk_register(NULL, &busy->div.hw);
- if (!clk)
+ if (IS_ERR(clk))
kfree(busy);
return clk;
clk[esdhc2_ipg_per] = imx_clk_gate("esdhc2_ipg_per", "per4", ccm(CCM_CGCR0), 4);
clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0), 5);
clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0), 6);
- clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per8", ccm(CCM_CGCR0), 7);
- clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "ipg_per", ccm(CCM_CGCR0), 8);
+ clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per7", ccm(CCM_CGCR0), 7);
+ clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "per8", ccm(CCM_CGCR0), 8);
clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13);
clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14);
clk[uart_ipg_per] = imx_clk_gate("uart_ipg_per", "per15", ccm(CCM_CGCR0), 15);
clk[per3_div] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6);
clk[per4_div] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6);
clk[vpu_sel] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks));
- clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 3);
+ clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6);
clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 28, 3);
clk[cpu_sel] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
clk[clko_sel] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
clk[ssi1_sel] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
clk[ssi2_sel] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
clk[ssi1_div] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6);
- clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 3);
+ clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6);
clk[clko_en] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0);
clk[ssi2_ipg_gate] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0);
clk[ssi1_ipg_gate] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1);
}
l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
- if (IS_ERR(l2x0_base)) {
- printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
- PTR_ERR(l2x0_base));
+ if (!l2x0_base) {
+ printk(KERN_ERR "remapping L2 cache area failed\n");
return;
}
select I2C_OMAP
select MENELAUS if ARCH_OMAP2
select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
- select PINCTRL
select PM_RUNTIME
select REGULATOR
select SERIAL_OMAP
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/opp.h>
+#include <linux/cpu.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
};
#endif
-static void __init beagle_opp_init(void)
+static int __init beagle_opp_init(void)
{
int r = 0;
- /* Initialize the omap3 opp table */
- if (omap3_opp_init()) {
+ if (!machine_is_omap3_beagle())
+ return 0;
+
+ /* Initialize the omap3 opp table if not already created. */
+ r = omap3_opp_init();
+ if (IS_ERR_VALUE(r) && (r != -EEXIST)) {
pr_err("%s: opp default init failed\n", __func__);
- return;
+ return r;
}
/* Custom OPP enabled for all xM versions */
if (cpu_is_omap3630()) {
struct device *mpu_dev, *iva_dev;
- mpu_dev = omap_device_get_by_hwmod_name("mpu");
+ mpu_dev = get_cpu_device(0);
iva_dev = omap_device_get_by_hwmod_name("iva");
if (IS_ERR(mpu_dev) || IS_ERR(iva_dev)) {
pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
__func__, mpu_dev, iva_dev);
- return;
+ return -ENODEV;
}
/* Enable MPU 1GHz and lower opps */
r = opp_enable(mpu_dev, 800000000);
opp_disable(iva_dev, 660000000);
}
}
- return;
+ return 0;
}
+device_initcall(beagle_opp_init);
static void __init omap3_beagle_init(void)
{
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-
- beagle_opp_init();
}
MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
CLK(NULL, "gfx_fck_div_ck", &gfx_fck_div_ck, CK_AM33XX),
CLK(NULL, "sysclkout_pre_ck", &sysclkout_pre_ck, CK_AM33XX),
CLK(NULL, "clkout2_ck", &clkout2_ck, CK_AM33XX),
+ CLK(NULL, "timer_32k_ck", &clkdiv32k_ick, CK_AM33XX),
+ CLK(NULL, "timer_sys_ck", &sys_clkin_ck, CK_AM33XX),
};
int __init am33xx_clk_init(void)
"sys_off_mode", NULL, NULL, NULL,
"gpio_9", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_CTS, 150,
- "uart1_cts", NULL, NULL, NULL,
+ "uart1_cts", "ssi1_rdy_tx", NULL, NULL,
"gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_RTS, 149,
- "uart1_rts", NULL, NULL, NULL,
+ "uart1_rts", "ssi1_flag_tx", NULL, NULL,
"gpio_149", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_RX, 151,
- "uart1_rx", NULL, "mcbsp1_clkr", "mcspi4_clk",
+ "uart1_rx", "ss1_wake_tx", "mcbsp1_clkr", "mcspi4_clk",
"gpio_151", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_TX, 148,
- "uart1_tx", NULL, NULL, NULL,
+ "uart1_tx", "ssi1_dat_tx", NULL, NULL,
"gpio_148", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART2_CTS, 144,
"uart2_cts", "mcbsp3_dx", "gpt9_pwm_evt", NULL,
#define PM_RTA_ERRATUM_i608 (1 << 0)
#define PM_SDRC_WAKEUP_ERRATUM_i583 (1 << 1)
+#define PM_PER_MEMORIES_ERRATUM_i582 (1 << 2)
#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
extern u16 pm34xx_errata;
/* Enable the l2 cache toggling in sleep logic */
enable_omap3630_toggle_l2_on_restore();
if (omap_rev() < OMAP3630_REV_ES1_2)
- pm34xx_errata |= PM_SDRC_WAKEUP_ERRATUM_i583;
+ pm34xx_errata |= (PM_SDRC_WAKEUP_ERRATUM_i583 |
+ PM_PER_MEMORIES_ERRATUM_i582);
+ } else if (cpu_is_omap34xx()) {
+ pm34xx_errata |= PM_PER_MEMORIES_ERRATUM_i582;
}
}
int __init omap3_pm_init(void)
{
struct power_state *pwrst, *tmp;
- struct clockdomain *neon_clkdm, *mpu_clkdm;
+ struct clockdomain *neon_clkdm, *mpu_clkdm, *per_clkdm, *wkup_clkdm;
int ret;
if (!omap3_has_io_chain_ctrl())
neon_clkdm = clkdm_lookup("neon_clkdm");
mpu_clkdm = clkdm_lookup("mpu_clkdm");
+ per_clkdm = clkdm_lookup("per_clkdm");
+ wkup_clkdm = clkdm_lookup("wkup_clkdm");
#ifdef CONFIG_SUSPEND
omap_pm_suspend = omap3_pm_suspend;
if (IS_PM34XX_ERRATUM(PM_RTA_ERRATUM_i608))
omap3630_ctrl_disable_rta();
+ /*
+ * The UART3/4 FIFO and the sidetone memory in McBSP2/3 are
+ * not correctly reset when the PER powerdomain comes back
+ * from OFF or OSWR when the CORE powerdomain is kept active.
+ * See OMAP36xx Erratum i582 "PER Domain reset issue after
+ * Domain-OFF/OSWR Wakeup". This wakeup dependency is not a
+ * complete workaround. The kernel must also prevent the PER
+ * powerdomain from going to OSWR/OFF while the CORE
+ * powerdomain is not going to OSWR/OFF. And if PER last
+ * power state was off while CORE last power state was ON, the
+ * UART3/4 and McBSP2/3 SIDETONE devices need to run a
+ * self-test using their loopback tests; if that fails, those
+ * devices are unusable until the PER/CORE can complete a transition
+ * from ON to OSWR/OFF and then back to ON.
+ *
+ * XXX Technically this workaround is only needed if off-mode
+ * or OSWR is enabled.
+ */
+ if (IS_PM34XX_ERRATUM(PM_PER_MEMORIES_ERRATUM_i582))
+ clkdm_add_wkdep(per_clkdm, wkup_clkdm);
+
clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
omap3_secure_ram_storage =
oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
+ if (console_uart_id == bdata->id) {
+ omap_device_enable(pdev);
+ pm_runtime_set_active(&pdev->dev);
+ }
+
oh->dev_attr = uart;
if (((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads)
#include <plat/nand-core.h>
#include <plat/adc-core.h>
#include <plat/rtc-core.h>
+#include <plat/spi-core.h>
static struct map_desc s3c2416_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
/* initialize device information early */
s3c2416_default_sdhci0();
s3c2416_default_sdhci1();
+ s3c64xx_spi_setname("s3c2443-spi");
iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc));
}
#include <plat/nand-core.h>
#include <plat/adc-core.h>
#include <plat/rtc-core.h>
+#include <plat/spi-core.h>
static struct map_desc s3c2443_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull;
s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull;
+ /* initialize device information early */
+ s3c64xx_spi_setname("s3c2443-spi");
+
iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
}
#include <plat/sdhci.h>
#include <plat/adc-core.h>
#include <plat/fb-core.h>
+#include <plat/spi-core.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-irqtype.h>
#include <plat/regs-serial.h>
/* initialize any device information early */
s3c_adc_setname("s3c64xx-adc");
s3c_fb_setname("s5p64x0-fb");
+ s3c64xx_spi_setname("s5p64x0-spi");
s5p64x0_default_sdhci0();
s5p64x0_default_sdhci1();
/* initialize any device information early */
s3c_adc_setname("s3c64xx-adc");
s3c_fb_setname("s5p64x0-fb");
+ s3c64xx_spi_setname("s5p64x0-spi");
s5p64x0_default_sdhci0();
s5p64x0_default_sdhci1();
#include <plat/fb-core.h>
#include <plat/iic-core.h>
#include <plat/onenand-core.h>
+#include <plat/spi-core.h>
#include <plat/regs-serial.h>
#include <plat/watchdog-reset.h>
s3c_onenand_setname("s5pc100-onenand");
s3c_fb_setname("s5pc100-fb");
s3c_cfcon_setname("s5pc100-pata");
+
+ s3c64xx_spi_setname("s5pc100-spi");
}
void __init s5pc100_init_clocks(int xtal)
#include <plat/iic-core.h>
#include <plat/keypad-core.h>
#include <plat/tv-core.h>
+#include <plat/spi-core.h>
#include <plat/regs-serial.h>
#include "common.h"
/* setup TV devices */
s5p_hdmi_setname("s5pv210-hdmi");
+
+ s3c64xx_spi_setname("s5pv210-spi");
}
void __init s5pv210_init_clocks(int xtal)
{
#ifdef CONFIG_CACHE_L2X0
/* Early BRESP enable, Shared attribute override enable, 64K*16way */
- l2x0_init((void __iomem __force *)(0xf0100000), 0x40470000, 0x82000fff);
+ l2x0_init(IOMEM(0xf0100000), 0x40470000, 0x82000fff);
#endif
r8a7779_pm_init();
#include <linux/stat.h>
#include <linux/of.h>
#include <linux/of_irq.h>
+#include <linux/irq.h>
#include <linux/platform_data/clk-ux500.h>
#include <asm/hardware/gic.h>
if (thumb2_32b) {
offset.un = 0;
handler = do_alignment_t32_to_handler(&instr, regs, &offset);
- } else
+ } else {
+ offset.un = 0;
handler = do_alignment_ldmstm;
+ }
break;
default:
gfp_t gfp, pgprot_t prot, bool is_coherent, const void *caller)
{
u64 mask = get_coherent_dma_mask(dev);
- struct page *page;
+ struct page *page = NULL;
void *addr;
#ifdef CONFIG_DMA_API_DEBUG
struct list_head vm_list;
unsigned long vm_start;
unsigned long vm_end;
- void *priv;
int vm_active;
const void *caller;
};
struct resource res[] = {
{
.start = data->iobase,
- .end = data->iobase + SZ_4K - 1,
+ .end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
select CLKDEV_LOOKUP
select GENERIC_IRQ_CHIP
select OMAP_DM_TIMER
+ select PINCTRL
select PROC_DEVICETREE if PROC_FS
select SPARSE_IRQ
select USE_OF
#define OMAP_UART_WER_MOD_WKUP 0X7F
/* Enable XON/XOFF flow control on output */
-#define OMAP_UART_SW_TX 0x8
+#define OMAP_UART_SW_TX 0x04
/* Enable XON/XOFF flow control on input */
-#define OMAP_UART_SW_RX 0x2
+#define OMAP_UART_SW_RX 0x04
#define OMAP_UART_SYSC_RESET 0X07
#define OMAP_UART_TCR_TRIG 0X0F
--- /dev/null
+/*
+ * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_S3C_SPI_CORE_H
+#define __PLAT_S3C_SPI_CORE_H
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c64xx_spi_setname(char *name)
+{
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+ s3c64xx_device_spi0.name = name;
+#endif
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+ s3c64xx_device_spi1.name = name;
+#endif
+#ifdef CONFIG_S3C64XX_DEV_SPI2
+ s3c64xx_device_spi2.name = name;
+#endif
+}
+
+#endif /* __PLAT_S3C_SPI_CORE_H */
#
include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types
- @echo ' Generating $@'
+ $(kecho) ' Generating $@'
@mkdir -p $(dir $@)
$(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
#include <xen/page.h>
#include <xen/grant_table.h>
-int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes,
+int arch_gnttab_map_shared(xen_pfn_t *frames, unsigned long nr_gframes,
unsigned long max_nr_gframes,
void **__shared)
{
generic-y += clkdev.h
generic-y += exec.h
+generic-y += kvm_para.h
+++ /dev/null
-/*
- * Copyright (C) 2007 Xiantao Zhang <xiantao.zhang@intel.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-#ifndef __IA64_KVM_PARA_H
-#define __IA64_KVM_PARA_H
-
-#include <uapi/asm/kvm_para.h>
-
-
-static inline unsigned int kvm_arch_para_features(void)
-{
- return 0;
-}
-
-static inline bool kvm_check_and_clear_guest_paused(void)
-{
- return false;
-}
-
-#endif
select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
select HAVE_UID16 if 32BIT
select ARCH_WANT_IPC_PARSE_VERSION
+ select HAVE_ARCH_TRANSPARENT_HUGEPAGE if 64BIT
select GENERIC_SMP_IDLE_THREAD
select GENERIC_TIME_VSYSCALL_OLD
select GENERIC_CLOCKEVENTS
OUTPUT_ARCH(s390:64-bit)
#else
OUTPUT_FORMAT("elf32-s390", "elf32-s390", "elf32-s390")
-OUTPUT_ARCH(s390)
+OUTPUT_ARCH(s390:31-bit)
#endif
ENTRY(startup)
#include <asm/cpu_mf.h>
/* CPU-measurement counter facility */
-#define PERF_CPUM_CF_MAX_CTR 160
+#define PERF_CPUM_CF_MAX_CTR 256
/* Per-CPU flags for PMU states */
#define PMU_F_RESERVED 0x1000
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-generic-y += kvm_para.h
-
header-y += auxvec.h
header-y += bitsperlong.h
header-y += byteorder.h
/*
- * Copyright IBM Corp. 2007
+ * Copyright IBM Corp. 2007, 2012
* Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
*/
#define __MAX_CHPID 255
struct chp_id {
- u8 reserved1;
- u8 cssid;
- u8 reserved2;
- u8 id;
+ __u8 reserved1;
+ __u8 cssid;
+ __u8 reserved2;
+ __u8 id;
} __attribute__((packed));
--- /dev/null
+/*
+ * User API definitions for paravirtual devices on s390
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ * Author(s): Christian Borntraeger <borntraeger@de.ibm.com>
+ */
enum {
CACHE_TI_UNIFIED = 0,
- CACHE_TI_INSTRUCTION = 0,
- CACHE_TI_DATA,
+ CACHE_TI_DATA = 0,
+ CACHE_TI_INSTRUCTION,
};
struct cache_info {
cache = kzalloc(sizeof(*cache), GFP_KERNEL);
if (!cache)
return -ENOMEM;
- ti = type == CACHE_TYPE_DATA ? CACHE_TI_DATA : CACHE_TI_UNIFIED;
+ if (type == CACHE_TYPE_INSTRUCTION)
+ ti = CACHE_TI_INSTRUCTION;
+ else
+ ti = CACHE_TI_UNIFIED;
cache->size = ecag(EXTRACT_SIZE, level, ti);
cache->line_size = ecag(EXTRACT_LINE_SIZE, level, ti);
cache->associativity = ecag(EXTRACT_ASSOCIATIVITY, level, ti);
.align 2
startup_kdump_relocated:
basr %r13,0
-0:
- mvc 0(8,%r0),.Lrestart_psw-0b(%r13) # Setup restart PSW
- sam31 # Switch to 31 bit addr mode
- sr %r1,%r1 # Erase register r1
- sr %r2,%r2 # Erase register r2
- sigp %r1,%r2,SIGP_SET_ARCHITECTURE # Switch to 31 bit arch mode
- lpsw 0 # Start new kernel...
+0: lpswe .Lrestart_psw-0b(%r13) # Start new kernel...
.align 8
.Lrestart_psw:
- .long 0x00080000,0x80000000 + startup
+ .quad 0x0000000080000000,0x0000000000000000 + startup
#else
.align 2
.Lep_startup_kdump:
set = CPUMF_CTR_SET_USER;
else if (event < 128)
set = CPUMF_CTR_SET_CRYPTO;
- else if (event < 160)
+ else if (event < 256)
set = CPUMF_CTR_SET_EXT;
return set;
case CPUMF_CTR_SET_EXT:
if (cpuhw->info.csvn < 1)
err = -EOPNOTSUPP;
+ if ((cpuhw->info.csvn == 1 && hwc->config > 159) ||
+ (cpuhw->info.csvn == 2 && hwc->config > 175) ||
+ (cpuhw->info.csvn > 2 && hwc->config > 255))
+ err = -EOPNOTSUPP;
break;
}
#ifndef CONFIG_64BIT
OUTPUT_FORMAT("elf32-s390", "elf32-s390", "elf32-s390")
-OUTPUT_ARCH(s390)
+OUTPUT_ARCH(s390:31-bit)
ENTRY(startup)
jiffies = jiffies_64 + 4;
#else
endif
endif
+# The tile compiler may emit .eh_frame information for backtracing.
+# In kernel modules, this causes load failures due to unsupported relocations.
+KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
+
ifneq ($(CONFIG_DEBUG_EXTRA_FLAGS),"")
KBUILD_CFLAGS += $(CONFIG_DEBUG_EXTRA_FLAGS)
endif
#include <asm/homecache.h>
#include <arch/opcode.h>
-#ifdef __tilegx__
-# define Elf_Rela Elf64_Rela
-# define ELF_R_SYM ELF64_R_SYM
-# define ELF_R_TYPE ELF64_R_TYPE
-#else
-# define Elf_Rela Elf32_Rela
-# define ELF_R_SYM ELF32_R_SYM
-# define ELF_R_TYPE ELF32_R_TYPE
-#endif
-
#ifdef MODULE_DEBUG
#define DEBUGP printk
#else
#define efi_call_virt6(f, a1, a2, a3, a4, a5, a6) \
efi_call_virt(f, a1, a2, a3, a4, a5, a6)
-#define efi_ioremap(addr, size, type) ioremap_cache(addr, size)
+#define efi_ioremap(addr, size, type, attr) ioremap_cache(addr, size)
#else /* !CONFIG_X86_32 */
(u64)(a3), (u64)(a4), (u64)(a5), (u64)(a6))
extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size,
- u32 type);
+ u32 type, u64 attribute);
#endif /* CONFIG_X86_32 */
extern int efi_memblock_x86_reserve_range(void);
extern void efi_call_phys_prelog(void);
extern void efi_call_phys_epilog(void);
+extern void efi_unmap_memmap(void);
+extern void efi_memory_uc(u64 addr, unsigned long size);
#ifndef CONFIG_EFI
/*
* with Xen so that on ARM we can have one ABI that works for 32 and 64
* bit guests. */
typedef unsigned long xen_pfn_t;
+#define PRI_xen_pfn "lx"
typedef unsigned long xen_ulong_t;
+#define PRI_xen_ulong "lx"
/* Guest handles for primitive C types. */
__DEFINE_GUEST_HANDLE(uchar, unsigned char);
__DEFINE_GUEST_HANDLE(uint, unsigned int);
-__DEFINE_GUEST_HANDLE(ulong, unsigned long);
DEFINE_GUEST_HANDLE(char);
DEFINE_GUEST_HANDLE(int);
-DEFINE_GUEST_HANDLE(long);
DEFINE_GUEST_HANDLE(void);
DEFINE_GUEST_HANDLE(uint64_t);
DEFINE_GUEST_HANDLE(uint32_t);
continue;
cfg = irq_cfg(irq);
+ if (!cfg)
+ continue;
+
raw_spin_lock(&desc->lock);
/*
}
/*
- * Now write a value and read it back to see if it matches,
- * this is needed to detect certain hardware emulators (qemu/kvm)
- * that don't trap on the MSR access and always return 0s.
+ * Read the current value, change it and read it back to see if it
+ * matches, this is needed to detect certain hardware emulators
+ * (qemu/kvm) that don't trap on the MSR access and always return 0s.
*/
- val = 0xabcdUL;
reg = x86_pmu_event_addr(0);
+ if (rdmsrl_safe(reg, &val))
+ goto msr_fail;
+ val ^= 0xffffUL;
ret = wrmsrl_safe(reg, val);
ret |= rdmsrl_safe(reg, &val_new);
if (ret || val != val_new)
{
struct pci_dev *pdev = box->pci_dev;
int box_ctl = uncore_pci_box_ctl(box);
- u32 config;
+ u32 config = 0;
- pci_read_config_dword(pdev, box_ctl, &config);
- config |= SNBEP_PMON_BOX_CTL_FRZ;
- pci_write_config_dword(pdev, box_ctl, config);
+ if (!pci_read_config_dword(pdev, box_ctl, &config)) {
+ config |= SNBEP_PMON_BOX_CTL_FRZ;
+ pci_write_config_dword(pdev, box_ctl, config);
+ }
}
static void snbep_uncore_pci_enable_box(struct intel_uncore_box *box)
{
struct pci_dev *pdev = box->pci_dev;
int box_ctl = uncore_pci_box_ctl(box);
- u32 config;
+ u32 config = 0;
- pci_read_config_dword(pdev, box_ctl, &config);
- config &= ~SNBEP_PMON_BOX_CTL_FRZ;
- pci_write_config_dword(pdev, box_ctl, config);
+ if (!pci_read_config_dword(pdev, box_ctl, &config)) {
+ config &= ~SNBEP_PMON_BOX_CTL_FRZ;
+ pci_write_config_dword(pdev, box_ctl, config);
+ }
}
static void snbep_uncore_pci_enable_event(struct intel_uncore_box *box, struct perf_event *event)
{
struct pci_dev *pdev = box->pci_dev;
struct hw_perf_event *hwc = &event->hw;
- u64 count;
+ u64 count = 0;
pci_read_config_dword(pdev, hwc->event_base, (u32 *)&count);
pci_read_config_dword(pdev, hwc->event_base + 4, (u32 *)&count + 1);
/*
* build pci bus to socket mapping
*/
-static void snbep_pci2phy_map_init(void)
+static int snbep_pci2phy_map_init(void)
{
struct pci_dev *ubox_dev = NULL;
int i, bus, nodeid;
- u32 config;
+ int err = 0;
+ u32 config = 0;
while (1) {
/* find the UBOX device */
break;
bus = ubox_dev->bus->number;
/* get the Node ID of the local register */
- pci_read_config_dword(ubox_dev, 0x40, &config);
+ err = pci_read_config_dword(ubox_dev, 0x40, &config);
+ if (err)
+ break;
nodeid = config;
/* get the Node ID mapping */
- pci_read_config_dword(ubox_dev, 0x54, &config);
+ err = pci_read_config_dword(ubox_dev, 0x54, &config);
+ if (err)
+ break;
/*
* every three bits in the Node ID mapping register maps
* to a particular node.
}
}
};
- return;
+
+ if (ubox_dev)
+ pci_dev_put(ubox_dev);
+
+ return err ? pcibios_err_to_errno(err) : 0;
}
/* end of Sandy Bridge-EP uncore support */
{
struct hw_perf_event *hwc = &event->hw;
struct hw_perf_event_extra *reg1 = &hwc->extra_reg;
- int port;
/* adjust the main event selector and extra register index */
if (reg1->idx % 2) {
}
/* adjust extra register config */
- port = reg1->idx / 6 + box->pmu->pmu_idx * 4;
switch (reg1->idx % 6) {
case 2:
/* shift the 8~15 bits to the 0~7 bits */
switch (boot_cpu_data.x86_model) {
case 45: /* Sandy Bridge-EP */
+ ret = snbep_pci2phy_map_init();
+ if (ret)
+ return ret;
pci_uncores = snbep_pci_uncores;
uncore_pci_driver = &snbep_uncore_pci_driver;
- snbep_pci2phy_map_init();
break;
default:
return 0;
if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
return -ENODEV;
+ if (cpu_has_hypervisor)
+ return -ENODEV;
+
ret = uncore_pci_init();
if (ret)
goto fail;
#include <linux/perf_event.h>
#include <linux/types.h>
+#include <asm/hardirq.h>
+
#include "perf_event.h"
static const u64 knc_perfmon_event_map[] =
static inline void
knc_pmu_disable_event(struct perf_event *event)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
u64 val;
val = hwc->config;
- if (cpuc->enabled)
- val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
+ val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
(void)wrmsrl_safe(hwc->config_base + hwc->idx, val);
}
static void knc_pmu_enable_event(struct perf_event *event)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
u64 val;
val = hwc->config;
- if (cpuc->enabled)
- val |= ARCH_PERFMON_EVENTSEL_ENABLE;
+ val |= ARCH_PERFMON_EVENTSEL_ENABLE;
(void)wrmsrl_safe(hwc->config_base + hwc->idx, val);
}
+static inline u64 knc_pmu_get_status(void)
+{
+ u64 status;
+
+ rdmsrl(MSR_KNC_IA32_PERF_GLOBAL_STATUS, status);
+
+ return status;
+}
+
+static inline void knc_pmu_ack_status(u64 ack)
+{
+ wrmsrl(MSR_KNC_IA32_PERF_GLOBAL_OVF_CONTROL, ack);
+}
+
+static int knc_pmu_handle_irq(struct pt_regs *regs)
+{
+ struct perf_sample_data data;
+ struct cpu_hw_events *cpuc;
+ int handled = 0;
+ int bit, loops;
+ u64 status;
+
+ cpuc = &__get_cpu_var(cpu_hw_events);
+
+ knc_pmu_disable_all();
+
+ status = knc_pmu_get_status();
+ if (!status) {
+ knc_pmu_enable_all(0);
+ return handled;
+ }
+
+ loops = 0;
+again:
+ knc_pmu_ack_status(status);
+ if (++loops > 100) {
+ WARN_ONCE(1, "perf: irq loop stuck!\n");
+ perf_event_print_debug();
+ goto done;
+ }
+
+ inc_irq_stat(apic_perf_irqs);
+
+ for_each_set_bit(bit, (unsigned long *)&status, X86_PMC_IDX_MAX) {
+ struct perf_event *event = cpuc->events[bit];
+
+ handled++;
+
+ if (!test_bit(bit, cpuc->active_mask))
+ continue;
+
+ if (!intel_pmu_save_and_restart(event))
+ continue;
+
+ perf_sample_data_init(&data, 0, event->hw.last_period);
+
+ if (perf_event_overflow(event, &data, regs))
+ x86_pmu_stop(event, 0);
+ }
+
+ /*
+ * Repeat if there is more work to be done:
+ */
+ status = knc_pmu_get_status();
+ if (status)
+ goto again;
+
+done:
+ knc_pmu_enable_all(0);
+
+ return handled;
+}
+
+
PMU_FORMAT_ATTR(event, "config:0-7" );
PMU_FORMAT_ATTR(umask, "config:8-15" );
PMU_FORMAT_ATTR(edge, "config:18" );
static __initconst struct x86_pmu knc_pmu = {
.name = "knc",
- .handle_irq = x86_pmu_handle_irq,
+ .handle_irq = knc_pmu_handle_irq,
.disable_all = knc_pmu_disable_all,
.enable_all = knc_pmu_enable_all,
.enable = knc_pmu_enable_event,
.event_map = knc_pmu_event_map,
.max_events = ARRAY_SIZE(knc_perfmon_event_map),
.apic = 1,
- .max_period = (1ULL << 31) - 1,
+ .max_period = (1ULL << 39) - 1,
.version = 0,
.num_counters = 2,
- /* in theory 40 bits, early silicon is buggy though */
- .cntval_bits = 32,
- .cntval_mask = (1ULL << 32) - 1,
+ .cntval_bits = 40,
+ .cntval_mask = (1ULL << 40) - 1,
.get_event_constraints = x86_get_event_constraints,
.event_constraints = knc_event_constraints,
.format_attrs = intel_knc_formats_attr,
*/
static const u64 p6_perfmon_event_map[] =
{
- [PERF_COUNT_HW_CPU_CYCLES] = 0x0079,
- [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0,
- [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0f2e,
- [PERF_COUNT_HW_CACHE_MISSES] = 0x012e,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c4,
- [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c5,
- [PERF_COUNT_HW_BUS_CYCLES] = 0x0062,
+ [PERF_COUNT_HW_CPU_CYCLES] = 0x0079, /* CPU_CLK_UNHALTED */
+ [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0, /* INST_RETIRED */
+ [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0f2e, /* L2_RQSTS:M:E:S:I */
+ [PERF_COUNT_HW_CACHE_MISSES] = 0x012e, /* L2_RQSTS:I */
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c4, /* BR_INST_RETIRED */
+ [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c5, /* BR_MISS_PRED_RETIRED */
+ [PERF_COUNT_HW_BUS_CYCLES] = 0x0062, /* BUS_DRDY_CLOCKS */
+ [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x00a2, /* RESOURCE_STALLS */
+
+};
+
+static __initconst u64 p6_hw_cache_event_ids
+ [PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+ [ C(L1D) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0x0043, /* DATA_MEM_REFS */
+ [ C(RESULT_MISS) ] = 0x0045, /* DCU_LINES_IN */
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0x0f29, /* L2_LD:M:E:S:I */
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ },
+ [ C(L1I ) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0x0080, /* IFU_IFETCH */
+ [ C(RESULT_MISS) ] = 0x0f28, /* L2_IFETCH:M:E:S:I */
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ },
+ [ C(LL ) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0x0025, /* L2_M_LINES_INM */
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ },
+ [ C(DTLB) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0x0043, /* DATA_MEM_REFS */
+ [ C(RESULT_MISS) ] = 0,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ },
+ [ C(ITLB) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0x0080, /* IFU_IFETCH */
+ [ C(RESULT_MISS) ] = 0x0085, /* ITLB_MISS */
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ },
+ [ C(BPU ) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0x00c4, /* BR_INST_RETIRED */
+ [ C(RESULT_MISS) ] = 0x00c5, /* BR_MISS_PRED_RETIRED */
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ },
};
static u64 p6_pmu_event_map(int hw_event)
{
INTEL_EVENT_CONSTRAINT(0xc1, 0x1), /* FLOPS */
INTEL_EVENT_CONSTRAINT(0x10, 0x1), /* FP_COMP_OPS_EXE */
- INTEL_EVENT_CONSTRAINT(0x11, 0x1), /* FP_ASSIST */
+ INTEL_EVENT_CONSTRAINT(0x11, 0x2), /* FP_ASSIST */
INTEL_EVENT_CONSTRAINT(0x12, 0x2), /* MUL */
INTEL_EVENT_CONSTRAINT(0x13, 0x2), /* DIV */
INTEL_EVENT_CONSTRAINT(0x14, 0x1), /* CYCLES_DIV_BUSY */
static inline void
p6_pmu_disable_event(struct perf_event *event)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
u64 val = P6_NOP_EVENT;
- if (cpuc->enabled)
- val |= ARCH_PERFMON_EVENTSEL_ENABLE;
-
(void)wrmsrl_safe(hwc->config_base, val);
}
static void p6_pmu_enable_event(struct perf_event *event)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
u64 val;
val = hwc->config;
- if (cpuc->enabled)
- val |= ARCH_PERFMON_EVENTSEL_ENABLE;
+
+ /*
+ * p6 only has a global event enable, set on PerfEvtSel0
+ * We "disable" events by programming P6_NOP_EVENT
+ * and we rely on p6_pmu_enable_all() being called
+ * to actually enable the events.
+ */
(void)wrmsrl_safe(hwc->config_base, val);
}
x86_pmu = p6_pmu;
+ memcpy(hw_cache_event_ids, p6_hw_cache_event_ids,
+ sizeof(hw_cache_event_ids));
+
+
return 0;
}
memblock_add(ei->addr, ei->size);
}
+ /* throw away partial pages */
+ memblock_trim_memory(PAGE_SIZE);
+
memblock_dump_all();
}
ENTRY(xen_hypervisor_callback)
CFI_STARTPROC
- pushl_cfi $0
+ pushl_cfi $-1 /* orig_ax = -1 => not a system call */
SAVE_ALL
TRACE_IRQS_OFF
2: mov 8(%esp),%es
3: mov 12(%esp),%fs
4: mov 16(%esp),%gs
+ /* EAX == 0 => Category 1 (Bad segment)
+ EAX != 0 => Category 2 (Bad IRET) */
testl %eax,%eax
popl_cfi %eax
lea 16(%esp),%esp
CFI_ADJUST_CFA_OFFSET -16
jz 5f
addl $16,%esp
- jmp iret_exc # EAX != 0 => Category 2 (Bad IRET)
-5: pushl_cfi $0 # EAX == 0 => Category 1 (Bad segment)
+ jmp iret_exc
+5: pushl_cfi $-1 /* orig_ax = -1 => not a system call */
SAVE_ALL
jmp ret_from_exception
CFI_ENDPROC
CFI_RESTORE r11
addq $0x30,%rsp
CFI_ADJUST_CFA_OFFSET -0x30
- pushq_cfi $0
+ pushq_cfi $-1 /* orig_ax = -1 => not a system call */
SAVE_ALL
jmp error_exit
CFI_ENDPROC
break;
case KVM_PV_REASON_PAGE_NOT_PRESENT:
/* page is swapped out by the host. */
+ rcu_irq_enter();
+ exit_idle();
kvm_async_pf_task_wait((u32)read_cr2());
+ rcu_irq_exit();
break;
case KVM_PV_REASON_PAGE_READY:
rcu_irq_enter();
#ifdef CONFIG_X86_64
if (max_pfn > max_low_pfn) {
int i;
- for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *ei = &e820.map[i];
+ unsigned long start, end;
+ unsigned long start_pfn, end_pfn;
- if (ei->addr + ei->size <= 1UL << 32)
- continue;
+ for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn,
+ NULL) {
- if (ei->type == E820_RESERVED)
+ end = PFN_PHYS(end_pfn);
+ if (end <= (1UL<<32))
continue;
+ start = PFN_PHYS(start_pfn);
max_pfn_mapped = init_memory_mapping(
- ei->addr < 1UL << 32 ? 1UL << 32 : ei->addr,
- ei->addr + ei->size);
+ max((1UL<<32), start), end);
}
/* can we preseve max_low_pfn ?*/
arch_init_ideal_nops();
register_refined_jiffies(CLOCK_TICK_RATE);
+
+#ifdef CONFIG_EFI
+ /* Once setup is done above, disable efi_enabled on mismatched
+ * firmware/kernel archtectures since there is no support for
+ * runtime services.
+ */
+ if (efi_enabled && IS_ENABLED(CONFIG_X86_64) != efi_64bit) {
+ pr_info("efi: Setup done, disabling due to 32/64-bit mismatch\n");
+ efi_unmap_memmap();
+ efi_enabled = 0;
+ }
+#endif
}
#ifdef CONFIG_X86_32
mce_notify_process();
#endif /* CONFIG_X86_64 && CONFIG_X86_MCE */
- if (thread_info_flags & _TIF_UPROBE) {
- clear_thread_flag(TIF_UPROBE);
+ if (thread_info_flags & _TIF_UPROBE)
uprobe_notify_resume(regs);
- }
/* deal with pending signal delivery */
if (thread_info_flags & _TIF_SIGPENDING)
/*
* Skip these instructions as per the currently known x86 ISA.
- * 0x66* { 0x90 | 0x0f 0x1f | 0x0f 0x19 | 0x87 0xc0 }
+ * rep=0x66*; nop=0x90
*/
static bool __skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs)
{
int i;
for (i = 0; i < MAX_UINSN_BYTES; i++) {
- if ((auprobe->insn[i] == 0x66))
+ if (auprobe->insn[i] == 0x66)
continue;
if (auprobe->insn[i] == 0x90)
return true;
- if (i == (MAX_UINSN_BYTES - 1))
- break;
-
- if ((auprobe->insn[i] == 0x0f) && (auprobe->insn[i+1] == 0x1f))
- return true;
-
- if ((auprobe->insn[i] == 0x0f) && (auprobe->insn[i+1] == 0x19))
- return true;
-
- if ((auprobe->insn[i] == 0x87) && (auprobe->insn[i+1] == 0xc0))
- return true;
-
break;
}
return false;
vcpu->arch.apic_base = value;
if (apic_x2apic_mode(apic)) {
u32 id = kvm_apic_id(apic);
- u32 ldr = ((id & ~0xf) << 16) | (1 << (id & 0xf));
+ u32 ldr = ((id >> 4) << 16) | (1 << (id & 0xf));
kvm_apic_set_ldr(apic, ldr);
}
apic->base_address = apic->vcpu->arch.apic_base &
}
}
- if (!is_error_pfn(pfn))
- kvm_release_pfn_clean(pfn);
+ kvm_release_pfn_clean(pfn);
}
static void nonpaging_new_cr3(struct kvm_vcpu *vcpu)
unsigned page_size_mask;
};
-static void __init find_early_table_space(struct map_range *mr, unsigned long end,
- int use_pse, int use_gbpages)
+/*
+ * First calculate space needed for kernel direct mapping page tables to cover
+ * mr[0].start to mr[nr_range - 1].end, while accounting for possible 2M and 1GB
+ * pages. Then find enough contiguous space for those page tables.
+ */
+static void __init find_early_table_space(struct map_range *mr, int nr_range)
{
- unsigned long puds, pmds, ptes, tables, start = 0, good_end = end;
+ int i;
+ unsigned long puds = 0, pmds = 0, ptes = 0, tables;
+ unsigned long start = 0, good_end;
phys_addr_t base;
- puds = (end + PUD_SIZE - 1) >> PUD_SHIFT;
- tables = roundup(puds * sizeof(pud_t), PAGE_SIZE);
-
- if (use_gbpages) {
- unsigned long extra;
-
- extra = end - ((end>>PUD_SHIFT) << PUD_SHIFT);
- pmds = (extra + PMD_SIZE - 1) >> PMD_SHIFT;
- } else
- pmds = (end + PMD_SIZE - 1) >> PMD_SHIFT;
+ for (i = 0; i < nr_range; i++) {
+ unsigned long range, extra;
- tables += roundup(pmds * sizeof(pmd_t), PAGE_SIZE);
+ range = mr[i].end - mr[i].start;
+ puds += (range + PUD_SIZE - 1) >> PUD_SHIFT;
- if (use_pse) {
- unsigned long extra;
+ if (mr[i].page_size_mask & (1 << PG_LEVEL_1G)) {
+ extra = range - ((range >> PUD_SHIFT) << PUD_SHIFT);
+ pmds += (extra + PMD_SIZE - 1) >> PMD_SHIFT;
+ } else {
+ pmds += (range + PMD_SIZE - 1) >> PMD_SHIFT;
+ }
- extra = end - ((end>>PMD_SHIFT) << PMD_SHIFT);
+ if (mr[i].page_size_mask & (1 << PG_LEVEL_2M)) {
+ extra = range - ((range >> PMD_SHIFT) << PMD_SHIFT);
#ifdef CONFIG_X86_32
- extra += PMD_SIZE;
+ extra += PMD_SIZE;
#endif
- /* The first 2/4M doesn't use large pages. */
- if (mr->start < PMD_SIZE)
- extra += mr->end - mr->start;
-
- ptes = (extra + PAGE_SIZE - 1) >> PAGE_SHIFT;
- } else
- ptes = (end + PAGE_SIZE - 1) >> PAGE_SHIFT;
+ ptes += (extra + PAGE_SIZE - 1) >> PAGE_SHIFT;
+ } else {
+ ptes += (range + PAGE_SIZE - 1) >> PAGE_SHIFT;
+ }
+ }
+ tables = roundup(puds * sizeof(pud_t), PAGE_SIZE);
+ tables += roundup(pmds * sizeof(pmd_t), PAGE_SIZE);
tables += roundup(ptes * sizeof(pte_t), PAGE_SIZE);
#ifdef CONFIG_X86_32
pgt_buf_top = pgt_buf_start + (tables >> PAGE_SHIFT);
printk(KERN_DEBUG "kernel direct mapping tables up to %#lx @ [mem %#010lx-%#010lx]\n",
- end - 1, pgt_buf_start << PAGE_SHIFT,
+ mr[nr_range - 1].end - 1, pgt_buf_start << PAGE_SHIFT,
(pgt_buf_top << PAGE_SHIFT) - 1);
}
* nodes are discovered.
*/
if (!after_bootmem)
- find_early_table_space(&mr[0], end, use_pse, use_gbpages);
+ find_early_table_space(mr, nr_range);
for (i = 0; i < nr_range; i++)
ret = kernel_physical_mapping_init(mr[i].start, mr[i].end,
* these mappings are more intelligent.
*/
if (pte_val(*pte)) {
- pages++;
+ if (!after_bootmem)
+ pages++;
continue;
}
* attributes.
*/
if (page_size_mask & (1 << PG_LEVEL_2M)) {
+ if (!after_bootmem)
+ pages++;
last_map_addr = next;
continue;
}
* attributes.
*/
if (page_size_mask & (1 << PG_LEVEL_1G)) {
+ if (!after_bootmem)
+ pages++;
last_map_addr = next;
continue;
}
val |= counter_config->extra;
event &= model->event_mask ? model->event_mask : 0xFF;
val |= event & 0xFF;
- val |= (event & 0x0F00) << 24;
+ val |= (u64)(event & 0x0F00) << 24;
return val;
}
struct efi_memory_map memmap;
bool efi_64bit;
-static bool efi_native;
static struct efi efi_phys __initdata;
static efi_system_table_t efi_systab __initdata;
+static inline bool efi_is_native(void)
+{
+ return IS_ENABLED(CONFIG_X86_64) == efi_64bit;
+}
+
static int __init setup_noefi(char *arg)
{
efi_enabled = 0;
}
}
-static void __init efi_unmap_memmap(void)
+void __init efi_unmap_memmap(void)
{
if (memmap.map) {
early_iounmap(memmap.map, memmap.nr_map * memmap.desc_size);
{
void *p;
- if (!efi_native)
+ if (!efi_is_native())
return;
for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
return;
}
efi_phys.systab = (efi_system_table_t *)boot_params.efi_info.efi_systab;
- efi_native = !efi_64bit;
#else
efi_phys.systab = (efi_system_table_t *)
(boot_params.efi_info.efi_systab |
((__u64)boot_params.efi_info.efi_systab_hi<<32));
- efi_native = efi_64bit;
#endif
if (efi_systab_init(efi_phys.systab)) {
* that doesn't match the kernel 32/64-bit mode.
*/
- if (!efi_native)
+ if (!efi_is_native())
pr_info("No EFI runtime due to 32/64-bit mismatch with kernel\n");
else if (efi_runtime_init()) {
efi_enabled = 0;
return;
}
#ifdef CONFIG_X86_32
- if (efi_native) {
+ if (efi_is_native()) {
x86_platform.get_wallclock = efi_get_time;
x86_platform.set_wallclock = efi_set_rtc_mmss;
}
return NULL;
}
+void efi_memory_uc(u64 addr, unsigned long size)
+{
+ unsigned long page_shift = 1UL << EFI_PAGE_SHIFT;
+ u64 npages;
+
+ npages = round_up(size, page_shift) / page_shift;
+ memrange_efi_to_native(&addr, &npages);
+ set_memory_uc(addr, npages);
+}
+
/*
* This function will switch the EFI runtime services to virtual mode.
* Essentially, look through the EFI memmap and map every region that
efi_memory_desc_t *md, *prev_md = NULL;
efi_status_t status;
unsigned long size;
- u64 end, systab, addr, npages, end_pfn;
+ u64 end, systab, end_pfn;
void *p, *va, *new_memmap = NULL;
int count = 0;
* non-native EFI
*/
- if (!efi_native) {
+ if (!efi_is_native()) {
efi_unmap_memmap();
return;
}
end_pfn = PFN_UP(end);
if (end_pfn <= max_low_pfn_mapped
|| (end_pfn > (1UL << (32 - PAGE_SHIFT))
- && end_pfn <= max_pfn_mapped))
+ && end_pfn <= max_pfn_mapped)) {
va = __va(md->phys_addr);
- else
- va = efi_ioremap(md->phys_addr, size, md->type);
+
+ if (!(md->attribute & EFI_MEMORY_WB))
+ efi_memory_uc((u64)(unsigned long)va, size);
+ } else
+ va = efi_ioremap(md->phys_addr, size,
+ md->type, md->attribute);
md->virt_addr = (u64) (unsigned long) va;
continue;
}
- if (!(md->attribute & EFI_MEMORY_WB)) {
- addr = md->virt_addr;
- npages = md->num_pages;
- memrange_efi_to_native(&addr, &npages);
- set_memory_uc(addr, npages);
- }
-
systab = (u64) (unsigned long) efi_phys.systab;
if (md->phys_addr <= systab && systab < end) {
systab += md->virt_addr - md->phys_addr;
}
void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size,
- u32 type)
+ u32 type, u64 attribute)
{
unsigned long last_map_pfn;
last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size);
if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size) {
unsigned long top = last_map_pfn << PAGE_SHIFT;
- efi_ioremap(top, size - (top - phys_addr), type);
+ efi_ioremap(top, size - (top - phys_addr), type, attribute);
}
+ if (!(attribute & EFI_MEMORY_WB))
+ efi_memory_uc((u64)(unsigned long)__va(phys_addr), size);
+
return (void __iomem *)__va(phys_addr);
}
#include "smp.h"
#include "multicalls.h"
-#include <xen/events.h>
-
EXPORT_SYMBOL_GPL(hypercall_page);
DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu);
if (physical_node->node_id >= ACPI_MAX_PHYSICAL_NODE) {
retval = -ENOSPC;
mutex_unlock(&acpi_dev->physical_node_lock);
+ kfree(physical_node);
goto err;
}
acpi_bus_generate_proc_event(device, event, 0);
acpi_bus_generate_netlink_event(device->pnp.device_class,
dev_name(&device->dev), event, 0);
+ break;
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Unsupported event [0x%x]\n", event));
choice
prompt "Selected region size"
- default CMA_SIZE_SEL_ABSOLUTE
+ default CMA_SIZE_SEL_MBYTES
config CMA_SIZE_SEL_MBYTES
bool "Use mega bytes value only"
* This checks whether the memory was allocated from the per-device
* coherent memory pool and if so, maps that memory to the provided vma.
*
- * Returns 1 if we correctly mapped the memory, or 0 if
- * dma_release_coherent() should proceed with mapping memory from
- * generic pools.
+ * Returns 1 if we correctly mapped the memory, or 0 if the caller should
+ * proceed with mapping memory from generic pools.
*/
int dma_mmap_from_coherent(struct device *dev, struct vm_area_struct *vma,
void *vaddr, size_t size, int *ret)
#include <linux/mm.h>
#include <linux/mutex.h>
#include <linux/page-isolation.h>
+#include <linux/sizes.h>
#include <linux/slab.h>
#include <linux/swap.h>
#include <linux/mm_types.h>
#include <linux/dma-contiguous.h>
-#ifndef SZ_1M
-#define SZ_1M (1 << 20)
-#endif
-
struct cma {
unsigned long base_pfn;
unsigned long count;
MODULE_DESCRIPTION("Multi purpose firmware loading support");
MODULE_LICENSE("GPL");
-static const char *fw_path[] = {
- "/lib/firmware/updates/" UTS_RELEASE,
- "/lib/firmware/updates",
- "/lib/firmware/" UTS_RELEASE,
- "/lib/firmware"
-};
-
-/* Don't inline this: 'struct kstat' is biggish */
-static noinline long fw_file_size(struct file *file)
-{
- struct kstat st;
- if (vfs_getattr(file->f_path.mnt, file->f_path.dentry, &st))
- return -1;
- if (!S_ISREG(st.mode))
- return -1;
- if (st.size != (long)st.size)
- return -1;
- return st.size;
-}
-
-static bool fw_read_file_contents(struct file *file, struct firmware *fw)
-{
- long size;
- char *buf;
-
- size = fw_file_size(file);
- if (size < 0)
- return false;
- buf = vmalloc(size);
- if (!buf)
- return false;
- if (kernel_read(file, 0, buf, size) != size) {
- vfree(buf);
- return false;
- }
- fw->data = buf;
- fw->size = size;
- return true;
-}
-
-static bool fw_get_filesystem_firmware(struct firmware *fw, const char *name)
-{
- int i;
- bool success = false;
- char *path = __getname();
-
- for (i = 0; i < ARRAY_SIZE(fw_path); i++) {
- struct file *file;
- snprintf(path, PATH_MAX, "%s/%s", fw_path[i], name);
-
- file = filp_open(path, O_RDONLY, 0);
- if (IS_ERR(file))
- continue;
- success = fw_read_file_contents(file, fw);
- fput(file);
- if (success)
- break;
- }
- __putname(path);
- return success;
-}
-
/* Builtin firmware support */
#ifdef CONFIG_FW_LOADER
FW_STATUS_ABORT,
};
+enum fw_buf_fmt {
+ VMALLOC_BUF, /* used in direct loading */
+ PAGE_BUF, /* used in loading via userspace */
+};
+
static int loading_timeout = 60; /* In seconds */
static inline long firmware_loading_timeout(void)
spinlock_t name_lock;
struct list_head fw_names;
- wait_queue_head_t wait_queue;
- int cnt;
struct delayed_work work;
struct notifier_block pm_notify;
struct completion completion;
struct firmware_cache *fwc;
unsigned long status;
+ enum fw_buf_fmt fmt;
void *data;
size_t size;
struct page **pages;
strcpy(buf->fw_id, fw_name);
buf->fwc = fwc;
init_completion(&buf->completion);
+ buf->fmt = VMALLOC_BUF;
pr_debug("%s: fw-%s buf=%p\n", __func__, fw_name, buf);
list_del(&buf->list);
spin_unlock(&fwc->lock);
- vunmap(buf->data);
- for (i = 0; i < buf->nr_pages; i++)
- __free_page(buf->pages[i]);
- kfree(buf->pages);
+
+ if (buf->fmt == PAGE_BUF) {
+ vunmap(buf->data);
+ for (i = 0; i < buf->nr_pages; i++)
+ __free_page(buf->pages[i]);
+ kfree(buf->pages);
+ } else
+ vfree(buf->data);
kfree(buf);
}
kref_put(&buf->ref, __fw_free_buf);
}
+/* direct firmware loading support */
+static const char *fw_path[] = {
+ "/lib/firmware/updates/" UTS_RELEASE,
+ "/lib/firmware/updates",
+ "/lib/firmware/" UTS_RELEASE,
+ "/lib/firmware"
+};
+
+/* Don't inline this: 'struct kstat' is biggish */
+static noinline long fw_file_size(struct file *file)
+{
+ struct kstat st;
+ if (vfs_getattr(file->f_path.mnt, file->f_path.dentry, &st))
+ return -1;
+ if (!S_ISREG(st.mode))
+ return -1;
+ if (st.size != (long)st.size)
+ return -1;
+ return st.size;
+}
+
+static bool fw_read_file_contents(struct file *file, struct firmware_buf *fw_buf)
+{
+ long size;
+ char *buf;
+
+ size = fw_file_size(file);
+ if (size < 0)
+ return false;
+ buf = vmalloc(size);
+ if (!buf)
+ return false;
+ if (kernel_read(file, 0, buf, size) != size) {
+ vfree(buf);
+ return false;
+ }
+ fw_buf->data = buf;
+ fw_buf->size = size;
+ return true;
+}
+
+static bool fw_get_filesystem_firmware(struct firmware_buf *buf)
+{
+ int i;
+ bool success = false;
+ char *path = __getname();
+
+ for (i = 0; i < ARRAY_SIZE(fw_path); i++) {
+ struct file *file;
+ snprintf(path, PATH_MAX, "%s/%s", fw_path[i], buf->fw_id);
+
+ file = filp_open(path, O_RDONLY, 0);
+ if (IS_ERR(file))
+ continue;
+ success = fw_read_file_contents(file, buf);
+ fput(file);
+ if (success)
+ break;
+ }
+ __putname(path);
+ return success;
+}
+
static struct firmware_priv *to_firmware_priv(struct device *dev)
{
return container_of(dev, struct firmware_priv, dev);
#ifndef PAGE_KERNEL_RO
#define PAGE_KERNEL_RO PAGE_KERNEL
#endif
+
+/* one pages buffer should be mapped/unmapped only once */
+static int fw_map_pages_buf(struct firmware_buf *buf)
+{
+ if (buf->fmt != PAGE_BUF)
+ return 0;
+
+ if (buf->data)
+ vunmap(buf->data);
+ buf->data = vmap(buf->pages, buf->nr_pages, 0, PAGE_KERNEL_RO);
+ if (!buf->data)
+ return -ENOMEM;
+ return 0;
+}
+
/**
* firmware_loading_store - set value in the 'loading' control file
* @dev: device pointer
if (test_bit(FW_STATUS_LOADING, &fw_buf->status)) {
set_bit(FW_STATUS_DONE, &fw_buf->status);
clear_bit(FW_STATUS_LOADING, &fw_buf->status);
+
+ /*
+ * Several loading requests may be pending on
+ * one same firmware buf, so let all requests
+ * see the mapped 'buf->data' once the loading
+ * is completed.
+ * */
+ fw_map_pages_buf(fw_buf);
complete_all(&fw_buf->completion);
break;
}
return fw_priv;
}
-/* one pages buffer is mapped/unmapped only once */
-static int fw_map_pages_buf(struct firmware_buf *buf)
-{
- buf->data = vmap(buf->pages, buf->nr_pages, 0, PAGE_KERNEL_RO);
- if (!buf->data)
- return -ENOMEM;
- return 0;
-}
-
/* store the pages buffer info firmware from buf */
static void fw_set_page_data(struct firmware_buf *buf, struct firmware *fw)
{
return NULL;
}
- if (fw_get_filesystem_firmware(firmware, name)) {
- dev_dbg(device, "firmware: direct-loading firmware %s\n", name);
- return NULL;
- }
-
ret = fw_lookup_and_allocate_buf(name, &fw_cache, &buf);
if (!ret)
fw_priv = fw_create_instance(firmware, name, device,
struct device *f_dev = &fw_priv->dev;
struct firmware_buf *buf = fw_priv->buf;
struct firmware_cache *fwc = &fw_cache;
+ int direct_load = 0;
+
+ /* try direct loading from fs first */
+ if (fw_get_filesystem_firmware(buf)) {
+ dev_dbg(f_dev->parent, "firmware: direct-loading"
+ " firmware %s\n", buf->fw_id);
+
+ set_bit(FW_STATUS_DONE, &buf->status);
+ complete_all(&buf->completion);
+ direct_load = 1;
+ goto handle_fw;
+ }
+
+ /* fall back on userspace loading */
+ buf->fmt = PAGE_BUF;
dev_set_uevent_suppress(f_dev, true);
del_timer_sync(&fw_priv->timeout);
+handle_fw:
mutex_lock(&fw_lock);
if (!buf->size || test_bit(FW_STATUS_ABORT, &buf->status))
retval = -ENOENT;
if (!retval && f_dev->parent)
fw_add_devm_name(f_dev->parent, buf->fw_id);
- if (!retval)
- retval = fw_map_pages_buf(buf);
-
/*
* After caching firmware image is started, let it piggyback
* on request firmware.
fw_priv->buf = NULL;
mutex_unlock(&fw_lock);
+ if (direct_load)
+ goto err_put_dev;
+
device_remove_file(f_dev, &dev_attr_loading);
err_del_bin_attr:
device_remove_bin_file(f_dev, &firmware_attr_data);
}
#ifdef CONFIG_PM_SLEEP
+static ASYNC_DOMAIN_EXCLUSIVE(fw_cache_domain);
+
static struct fw_cache_entry *alloc_fw_cache_entry(const char *name)
{
struct fw_cache_entry *fce;
return fce;
}
-static int fw_cache_piggyback_on_request(const char *name)
+static int __fw_entry_found(const char *name)
{
struct firmware_cache *fwc = &fw_cache;
struct fw_cache_entry *fce;
- int ret = 0;
- spin_lock(&fwc->name_lock);
list_for_each_entry(fce, &fwc->fw_names, list) {
if (!strcmp(fce->name, name))
- goto found;
+ return 1;
}
+ return 0;
+}
+
+static int fw_cache_piggyback_on_request(const char *name)
+{
+ struct firmware_cache *fwc = &fw_cache;
+ struct fw_cache_entry *fce;
+ int ret = 0;
+
+ spin_lock(&fwc->name_lock);
+ if (__fw_entry_found(name))
+ goto found;
fce = alloc_fw_cache_entry(name);
if (fce) {
free_fw_cache_entry(fce);
}
-
- spin_lock(&fwc->name_lock);
- fwc->cnt--;
- spin_unlock(&fwc->name_lock);
-
- wake_up(&fwc->wait_queue);
}
/* called with dev->devres_lock held */
list_del(&fce->list);
spin_lock(&fwc->name_lock);
- fwc->cnt++;
- list_add(&fce->list, &fwc->fw_names);
+ /* only one cache entry for one firmware */
+ if (!__fw_entry_found(fce->name)) {
+ list_add(&fce->list, &fwc->fw_names);
+ } else {
+ free_fw_cache_entry(fce);
+ fce = NULL;
+ }
spin_unlock(&fwc->name_lock);
- async_schedule(__async_dev_cache_fw_image, (void *)fce);
+ if (fce)
+ async_schedule_domain(__async_dev_cache_fw_image,
+ (void *)fce,
+ &fw_cache_domain);
}
}
pr_debug("%s\n", __func__);
+ /* cancel uncache work */
+ cancel_delayed_work_sync(&fwc->work);
+
/*
* use small loading timeout for caching devices' firmware
* because all these firmware images have been loaded
mutex_unlock(&fw_lock);
/* wait for completion of caching firmware for all devices */
- spin_lock(&fwc->name_lock);
- for (;;) {
- prepare_to_wait(&fwc->wait_queue, &wait,
- TASK_UNINTERRUPTIBLE);
- if (!fwc->cnt)
- break;
-
- spin_unlock(&fwc->name_lock);
-
- schedule();
-
- spin_lock(&fwc->name_lock);
- }
- spin_unlock(&fwc->name_lock);
- finish_wait(&fwc->wait_queue, &wait);
+ async_synchronize_full_domain(&fw_cache_domain);
loading_timeout = old_timeout;
}
#ifdef CONFIG_PM_SLEEP
spin_lock_init(&fw_cache.name_lock);
INIT_LIST_HEAD(&fw_cache.fw_names);
- fw_cache.cnt = 0;
- init_waitqueue_head(&fw_cache.wait_queue);
INIT_DELAYED_WORK(&fw_cache.work,
device_uncache_fw_images_work);
cpuidle_drv = cpuidle_driver_ref();
if (!cpuidle_drv) {
ret = -ENODEV;
- goto out;
+ goto err_drv;
}
if (cpuidle_drv->state_count <= state) {
ret = -EINVAL;
err:
cpuidle_driver_unref();
+
+ err_drv:
+ kfree(cpu_data);
goto out;
}
# subsystems should select the appropriate symbols.
config REGMAP
- default y if (REGMAP_I2C || REGMAP_SPI)
+ default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_MMIO || REGMAP_IRQ)
select LZO_COMPRESS
select LZO_DECOMPRESS
select IRQ_DOMAIN if REGMAP_IRQ
static void bcma_unregister_cores(struct bcma_bus *bus)
{
- struct bcma_device *core;
+ struct bcma_device *core, *tmp;
- list_for_each_entry(core, &bus->cores, list) {
+ list_for_each_entry_safe(core, tmp, &bus->cores, list) {
+ list_del(&core->list);
if (core->dev_registered)
device_unregister(&core->dev);
}
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int old_camera_power;
static int sonypi_suspend(struct device *dev)
cpufreq_update_policy(cpu);
break;
case CPU_DOWN_PREPARE:
+ case CPU_DOWN_PREPARE_FROZEN:
cpufreq_stats_free_sysfs(cpu);
break;
case CPU_DEAD:
struct powernowk8_target_arg pta = { .pol = pol, .targfreq = targfreq,
.relation = relation };
- /*
- * Must run on @pol->cpu. cpufreq core is responsible for ensuring
- * that we're bound to the current CPU and pol->cpu stays online.
- */
- if (smp_processor_id() == pol->cpu)
- return powernowk8_target_fn(&pta);
- else
- return work_on_cpu(pol->cpu, powernowk8_target_fn, &pta);
+ return work_on_cpu(pol->cpu, powernowk8_target_fn, &pta);
}
/* Driver entry point to verify the policy and range of frequencies */
Support the Synopsys DesignWare AHB DMA controller. This
can be integrated in chips such as the Atmel AT32ap7000.
+config DW_DMAC_BIG_ENDIAN_IO
+ bool "Use big endian I/O register access"
+ default y if AVR32
+ depends on DW_DMAC
+ help
+ Say yes here to use big endian I/O access when reading and writing
+ to the DMA controller registers. This is needed on some platforms,
+ like the Atmel AVR32 architecture.
+
+ If unsure, use the default setting.
+
config AT_HDMAC
tristate "Atmel AHB DMA support"
depends on ARCH_AT91
u32 DW_PARAMS;
};
+#ifdef CONFIG_DW_DMAC_BIG_ENDIAN_IO
+#define dma_readl_native ioread32be
+#define dma_writel_native iowrite32be
+#else
+#define dma_readl_native readl
+#define dma_writel_native writel
+#endif
+
/* To access the registers in early stage of probe */
#define dma_read_byaddr(addr, name) \
- readl((addr) + offsetof(struct dw_dma_regs, name))
+ dma_readl_native((addr) + offsetof(struct dw_dma_regs, name))
/* Bitfields in DW_PARAMS */
#define DW_PARAMS_NR_CHAN 8 /* number of channels */
}
#define channel_readl(dwc, name) \
- readl(&(__dwc_regs(dwc)->name))
+ dma_readl_native(&(__dwc_regs(dwc)->name))
#define channel_writel(dwc, name, val) \
- writel((val), &(__dwc_regs(dwc)->name))
+ dma_writel_native((val), &(__dwc_regs(dwc)->name))
static inline struct dw_dma_chan *to_dw_dma_chan(struct dma_chan *chan)
{
}
#define dma_readl(dw, name) \
- readl(&(__dw_regs(dw)->name))
+ dma_readl_native(&(__dw_regs(dw)->name))
#define dma_writel(dw, name, val) \
- writel((val), &(__dw_regs(dw)->name))
+ dma_writel_native((val), &(__dw_regs(dw)->name))
#define channel_set_bit(dw, reg, mask) \
dma_writel(dw, reg, ((mask) << 8) | (mask))
slot = i;
break;
}
- if (slot < 0)
+ if (slot < 0) {
+ spin_unlock_irqrestore(&imxdma->lock, flags);
return -EBUSY;
+ }
imxdma->slots_2d[slot].xsr = d->x;
imxdma->slots_2d[slot].ysr = d->y;
sdesc = list_first_entry(&schan->queued, struct sirfsoc_dma_desc,
node);
/* Move the first queued descriptor to active list */
- list_move_tail(&schan->queued, &schan->active);
+ list_move_tail(&sdesc->node, &schan->active);
/* Start the DMA transfer */
writel_relaxed(sdesc->width, sdma->base + SIRFSOC_DMA_WIDTH_0 +
unsigned long iflags;
int ret;
- if ((xt->dir != DMA_MEM_TO_DEV) || (xt->dir != DMA_DEV_TO_MEM)) {
+ if ((xt->dir != DMA_MEM_TO_DEV) && (xt->dir != DMA_DEV_TO_MEM)) {
ret = -EINVAL;
goto err_dir;
}
* memory controller and apply to register. Search for the first
* bandwidth entry that is greater or equal than the setting requested
* and program that. If at last entry, turn off DRAM scrubbing.
+ *
+ * If no suitable bandwidth is found, turn off DRAM scrubbing entirely
+ * by falling back to the last element in scrubrates[].
*/
- for (i = 0; i < ARRAY_SIZE(scrubrates); i++) {
+ for (i = 0; i < ARRAY_SIZE(scrubrates) - 1; i++) {
/*
* skip scrub rates which aren't recommended
* (see F10 BKDG, F3x58)
if (scrubrates[i].bandwidth <= new_bw)
break;
-
- /*
- * if no suitable bandwidth found, turn off DRAM scrubbing
- * entirely by falling back to the last element in the
- * scrubrates array.
- */
}
scrubval = scrubrates[i].scrubval;
*
*/
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/device.h>
#include <linux/platform_device.h>
err = request_any_context_irq(data->irq, adc_jack_irq_thread,
pdata->irq_flags, pdata->name, data);
- if (err) {
+ if (err < 0) {
dev_err(&pdev->dev, "error: irq %d\n", data->irq);
- err = -EINVAL;
goto err_irq;
}
- goto out;
+ return 0;
err_irq:
extcon_dev_unregister(&data->edev);
};
module_platform_driver(adc_jack_driver);
+
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+MODULE_DESCRIPTION("ADC Jack extcon driver");
+MODULE_LICENSE("GPL v2");
* every single port-type of the following cable names. Please choose cable
* names that are actually used in your extcon device.
*/
-const char *extcon_cable_name[] = {
+const char extcon_cable_name[][CABLE_NAME_MAX + 1] = {
[EXTCON_USB] = "USB",
[EXTCON_USB_HOST] = "USB-Host",
[EXTCON_TA] = "TA",
[EXTCON_VIDEO_IN] = "Video-in",
[EXTCON_VIDEO_OUT] = "Video-out",
[EXTCON_MECHANICAL] = "Mechanical",
-
- NULL,
};
static struct class *extcon_class;
return 0;
for (i = 0; edev->mutually_exclusive[i]; i++) {
- int count = 0, j;
+ int weight;
u32 correspondants = new_state & edev->mutually_exclusive[i];
- u32 exp = 1;
-
- for (j = 0; j < 32; j++) {
- if (exp & correspondants)
- count++;
- if (count > 1)
- return i + 1;
- exp <<= 1;
- }
+
+ /* calculate the total number of bits set */
+ weight = hweight32(correspondants);
+ if (weight > 1)
+ return i + 1;
}
return 0;
EXPORT_SYMBOL_GPL(extcon_get_cable_state);
/**
- * extcon_get_cable_state_() - Set the status of a specific cable.
+ * extcon_set_cable_state_() - Set the status of a specific cable.
* @edev: the extcon device that has the cable.
* @index: cable index that can be retrieved by extcon_find_cable_index().
* @cable_state: the new cable status. The default semantics is
EXPORT_SYMBOL_GPL(extcon_set_cable_state_);
/**
- * extcon_get_cable_state() - Set the status of a specific cable.
+ * extcon_set_cable_state() - Set the status of a specific cable.
* @edev: the extcon device that has the cable.
* @cable_name: cable name.
* @cable_state: the new cable status. The default semantics is
* extcon device.
* @obj: an empty extcon_specific_cable_nb object to be returned.
* @extcon_name: the name of extcon device.
+ * if NULL, extcon_register_interest will register
+ * every cable with the target cable_name given.
* @cable_name: the target cable name.
* @nb: the notifier block to get notified.
*
const char *extcon_name, const char *cable_name,
struct notifier_block *nb)
{
- if (!obj || !extcon_name || !cable_name || !nb)
+ if (!obj || !cable_name || !nb)
return -EINVAL;
- obj->edev = extcon_get_extcon_dev(extcon_name);
- if (!obj->edev)
- return -ENODEV;
+ if (extcon_name) {
+ obj->edev = extcon_get_extcon_dev(extcon_name);
+ if (!obj->edev)
+ return -ENODEV;
- obj->cable_index = extcon_find_cable_index(obj->edev, cable_name);
- if (obj->cable_index < 0)
- return -ENODEV;
+ obj->cable_index = extcon_find_cable_index(obj->edev, cable_name);
+ if (obj->cable_index < 0)
+ return -ENODEV;
+
+ obj->user_nb = nb;
- obj->user_nb = nb;
+ obj->internal_nb.notifier_call = _call_per_cable;
- obj->internal_nb.notifier_call = _call_per_cable;
+ return raw_notifier_chain_register(&obj->edev->nh, &obj->internal_nb);
+ } else {
+ struct class_dev_iter iter;
+ struct extcon_dev *extd;
+ struct device *dev;
+
+ if (!extcon_class)
+ return -ENODEV;
+ class_dev_iter_init(&iter, extcon_class, NULL, NULL);
+ while ((dev = class_dev_iter_next(&iter))) {
+ extd = (struct extcon_dev *)dev_get_drvdata(dev);
+
+ if (extcon_find_cable_index(extd, cable_name) < 0)
+ continue;
+
+ class_dev_iter_exit(&iter);
+ return extcon_register_interest(obj, extd->name,
+ cable_name, nb);
+ }
- return raw_notifier_chain_register(&obj->edev->nh, &obj->internal_nb);
+ return -ENODEV;
+ }
}
/**
return 0;
}
-static void extcon_cleanup(struct extcon_dev *edev, bool skip)
-{
- mutex_lock(&extcon_dev_list_lock);
- list_del(&edev->entry);
- mutex_unlock(&extcon_dev_list_lock);
-
- if (!skip && get_device(edev->dev)) {
- int index;
-
- if (edev->mutually_exclusive && edev->max_supported) {
- for (index = 0; edev->mutually_exclusive[index];
- index++)
- kfree(edev->d_attrs_muex[index].attr.name);
- kfree(edev->d_attrs_muex);
- kfree(edev->attrs_muex);
- }
-
- for (index = 0; index < edev->max_supported; index++)
- kfree(edev->cables[index].attr_g.name);
-
- if (edev->max_supported) {
- kfree(edev->extcon_dev_type.groups);
- kfree(edev->cables);
- }
-
- device_unregister(edev->dev);
- put_device(edev->dev);
- }
-
- kfree(edev->dev);
-}
-
static void extcon_dev_release(struct device *dev)
{
- struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev);
-
- extcon_cleanup(edev, true);
+ kfree(dev);
}
static const char *muex_name = "mutually_exclusive";
*/
void extcon_dev_unregister(struct extcon_dev *edev)
{
- extcon_cleanup(edev, false);
+ int index;
+
+ mutex_lock(&extcon_dev_list_lock);
+ list_del(&edev->entry);
+ mutex_unlock(&extcon_dev_list_lock);
+
+ if (IS_ERR_OR_NULL(get_device(edev->dev))) {
+ dev_err(edev->dev, "Failed to unregister extcon_dev (%s)\n",
+ dev_name(edev->dev));
+ return;
+ }
+
+ if (edev->mutually_exclusive && edev->max_supported) {
+ for (index = 0; edev->mutually_exclusive[index];
+ index++)
+ kfree(edev->d_attrs_muex[index].attr.name);
+ kfree(edev->d_attrs_muex);
+ kfree(edev->attrs_muex);
+ }
+
+ for (index = 0; index < edev->max_supported; index++)
+ kfree(edev->cables[index].attr_g.name);
+
+ if (edev->max_supported) {
+ kfree(edev->extcon_dev_type.groups);
+ kfree(edev->cables);
+ }
+
+#if defined(CONFIG_ANDROID)
+ if (switch_class)
+ class_compat_remove_link(switch_class, edev->dev, NULL);
+#endif
+ device_unregister(edev->dev);
+ put_device(edev->dev);
}
EXPORT_SYMBOL_GPL(extcon_dev_unregister);
static void __exit extcon_class_exit(void)
{
+#if defined(CONFIG_ANDROID)
+ class_compat_unregister(switch_class);
+#endif
class_destroy(extcon_class);
}
module_exit(extcon_class_exit);
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <linux/extcon.h>
#include <linux/workqueue.h>
#include <linux/gpio.h>
#include <linux/extcon.h>
static int max77693_muic_set_debounce_time(struct max77693_muic_info *info,
enum max77693_muic_adc_debounce_time time)
{
- int ret = 0;
- u8 ctrl3;
+ int ret;
switch (time) {
case ADC_DEBOUNCE_TIME_5MS:
case ADC_DEBOUNCE_TIME_10MS:
case ADC_DEBOUNCE_TIME_25MS:
case ADC_DEBOUNCE_TIME_38_62MS:
- ret = max77693_read_reg(info->max77693->regmap_muic,
- MAX77693_MUIC_REG_CTRL3, &ctrl3);
- ctrl3 &= ~CONTROL3_ADCDBSET_MASK;
- ctrl3 |= (time << CONTROL3_ADCDBSET_SHIFT);
-
- ret = max77693_write_reg(info->max77693->regmap_muic,
- MAX77693_MUIC_REG_CTRL3, ctrl3);
- if (ret) {
+ ret = max77693_update_reg(info->max77693->regmap_muic,
+ MAX77693_MUIC_REG_CTRL3,
+ time << CONTROL3_ADCDBSET_SHIFT,
+ CONTROL3_ADCDBSET_MASK);
+ if (ret)
dev_err(info->dev, "failed to set ADC debounce time\n");
- ret = -EINVAL;
- }
break;
default:
dev_err(info->dev, "invalid ADC debounce time\n");
static int __devinit max77693_muic_probe(struct platform_device *pdev)
{
struct max77693_dev *max77693 = dev_get_drvdata(pdev->dev.parent);
+ struct max77693_platform_data *pdata = dev_get_platdata(max77693->dev);
+ struct max77693_muic_platform_data *muic_pdata = pdata->muic_data;
struct max77693_muic_info *info;
int ret, i;
u8 id;
goto err_extcon;
}
+ /* Initialize MUIC register by using platform data */
+ for (i = 0 ; i < muic_pdata->num_init_data ; i++) {
+ enum max77693_irq_source irq_src = MAX77693_IRQ_GROUP_NR;
+
+ max77693_write_reg(info->max77693->regmap_muic,
+ muic_pdata->init_data[i].addr,
+ muic_pdata->init_data[i].data);
+
+ switch (muic_pdata->init_data[i].addr) {
+ case MAX77693_MUIC_REG_INTMASK1:
+ irq_src = MUIC_INT1;
+ break;
+ case MAX77693_MUIC_REG_INTMASK2:
+ irq_src = MUIC_INT2;
+ break;
+ case MAX77693_MUIC_REG_INTMASK3:
+ irq_src = MUIC_INT3;
+ break;
+ }
+
+ if (irq_src < MAX77693_IRQ_GROUP_NR)
+ info->max77693->irq_masks_cur[irq_src]
+ = muic_pdata->init_data[i].data;
+ }
+
/* Check revision number of MUIC device*/
ret = max77693_read_reg(info->max77693->regmap_muic,
MAX77693_MUIC_REG_ID, &id);
free_irq(muic_irqs[i].virq, info);
cancel_work_sync(&info->irq_work);
extcon_dev_unregister(info->edev);
+ kfree(info->edev);
kfree(info);
return 0;
static int max8997_muic_handle_charger_type_detach(
struct max8997_muic_info *info)
{
- int ret = 0;
-
switch (info->pre_charger_type) {
case MAX8997_CHARGER_TYPE_USB:
extcon_set_cable_state(info->edev, "USB", false);
extcon_set_cable_state(info->edev, "Fast-charger", false);
break;
default:
- ret = -EINVAL;
+ return -EINVAL;
break;
}
- return ret;
+ return 0;
}
static int max8997_muic_handle_charger_type(struct max8997_muic_info *info,
size_t size;
int ret;
- DRM_DEBUG_KMS("surface width(%d), height(%d) and bpp(%d\n",
+ DRM_DEBUG_KMS("surface width(%d), height(%d) and bpp(%d)\n",
sizes->surface_width, sizes->surface_height,
sizes->surface_bpp);
size = mode_cmd.pitches[0] * mode_cmd.height;
obj = drm_gem_cma_create(dev, size);
- if (!obj)
+ if (IS_ERR(obj))
return -ENOMEM;
fbi = framebuffer_alloc(0, dev->dev);
struct drm_gem_object *obj = ptr;
struct seq_file *m = data;
- seq_printf(m, "name %d size %zd\n", obj->name, obj->size);
-
seq_printf(m, "%6d %8zd %7d %8d\n",
obj->name, obj->size,
atomic_read(&obj->handle_count),
}
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
- dev_set_drvdata(&platdev->dev, dev);
ret = drm_get_minor(dev, &dev->control, DRM_MINOR_CONTROL);
if (ret)
goto err_g1;
MODULE_PARM_DESC(i915_enable_ppgtt,
"Enable PPGTT (default: true)");
+unsigned int i915_preliminary_hw_support __read_mostly = 0;
+module_param_named(preliminary_hw_support, i915_preliminary_hw_support, int, 0600);
+MODULE_PARM_DESC(preliminary_hw_support,
+ "Enable preliminary hardware support. "
+ "Enable Haswell and ValleyView Support. "
+ "(default: false)");
+
static struct drm_driver driver;
extern int intel_agp_enabled;
struct intel_device_info *intel_info =
(struct intel_device_info *) ent->driver_data;
+ if (intel_info->is_haswell || intel_info->is_valleyview)
+ if(!i915_preliminary_hw_support) {
+ DRM_ERROR("Preliminary hardware support disabled\n");
+ return -ENODEV;
+ }
+
/* Only bind to function 0 of the device. Early generations
* used function 1 as a placeholder for multi-head. This causes
* us confusion instead, especially on the systems where both
extern int i915_enable_fbc __read_mostly;
extern bool i915_enable_hangcheck __read_mostly;
extern int i915_enable_ppgtt __read_mostly;
+extern unsigned int i915_preliminary_hw_support __read_mostly;
extern int i915_suspend(struct drm_device *dev, pm_message_t state);
extern int i915_resume(struct drm_device *dev);
return VM_FAULT_NOPAGE;
case -ENOMEM:
return VM_FAULT_OOM;
+ case -ENOSPC:
+ return VM_FAULT_SIGBUS;
default:
- WARN_ON_ONCE(ret);
+ WARN_ONCE(ret, "unhandled error in i915_gem_fault: %i\n", ret);
return VM_FAULT_SIGBUS;
}
}
sg_set_page(sg, page, PAGE_SIZE, 0);
}
+ obj->pages = st;
+
if (i915_gem_object_needs_bit17_swizzle(obj))
i915_gem_object_do_bit_17_swizzle(obj);
- obj->pages = st;
return 0;
err_pages:
intel_encoder_to_crt(to_intel_encoder(encoder));
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct drm_i915_private *dev_priv = dev->dev_private;
- int dpll_md_reg;
- u32 adpa, dpll_md;
-
- dpll_md_reg = DPLL_MD(intel_crtc->pipe);
-
- /*
- * Disable separate mode multiplier used when cloning SDVO to CRT
- * XXX this needs to be adjusted when we really are cloning
- */
- if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) {
- dpll_md = I915_READ(dpll_md_reg);
- I915_WRITE(dpll_md_reg,
- dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
- }
+ u32 adpa;
adpa = ADPA_HOTPLUG_BITS;
if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
void (*hook)(struct drm_device *dev);
};
+/* For systems that don't have a meaningful PCI subdevice/subvendor ID */
+struct intel_dmi_quirk {
+ void (*hook)(struct drm_device *dev);
+ const struct dmi_system_id (*dmi_id_list)[];
+};
+
+static int intel_dmi_reverse_brightness(const struct dmi_system_id *id)
+{
+ DRM_INFO("Backlight polarity reversed on %s\n", id->ident);
+ return 1;
+}
+
+static const struct intel_dmi_quirk intel_dmi_quirks[] = {
+ {
+ .dmi_id_list = &(const struct dmi_system_id[]) {
+ {
+ .callback = intel_dmi_reverse_brightness,
+ .ident = "NCR Corporation",
+ .matches = {DMI_MATCH(DMI_SYS_VENDOR, "NCR Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, ""),
+ },
+ },
+ { } /* terminating entry */
+ },
+ .hook = quirk_invert_brightness,
+ },
+};
+
static struct intel_quirk intel_quirks[] = {
/* HP Mini needs pipe A force quirk (LP: #322104) */
{ 0x27ae, 0x103c, 0x361a, quirk_pipea_force },
q->subsystem_device == PCI_ANY_ID))
q->hook(dev);
}
+ for (i = 0; i < ARRAY_SIZE(intel_dmi_quirks); i++) {
+ if (dmi_check_system(*intel_dmi_quirks[i].dmi_id_list) != 0)
+ intel_dmi_quirks[i].hook(dev);
+ }
}
/* Disable the VGA plane that we never use */
if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
break;
if (i == intel_dp->lane_count && voltage_tries == 5) {
- if (++loop_tries == 5) {
+ ++loop_tries;
+ if (loop_tries == 5) {
DRM_DEBUG_KMS("too many full retries, give up\n");
break;
}
}
/* Check to see if we've tried the same voltage 5 times */
- if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) != voltage) {
- voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
- voltage_tries = 0;
- } else
+ if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
++voltage_tries;
+ if (voltage_tries == 5) {
+ DRM_DEBUG_KMS("too many voltage retries, give up\n");
+ break;
+ }
+ } else
+ voltage_tries = 0;
+ voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
/* Compute new intel_dp->train_set as requested by target */
intel_get_adjust_train(intel_dp, link_status);
DMI_MATCH(DMI_BOARD_NAME, "D525TUD"),
},
},
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "Supermicro X7SPA-H",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X7SPA-H"),
+ },
+ },
{ } /* terminating entry */
};
/* DDC bus used by this SDVO encoder */
uint8_t ddc_bus;
+
+ /*
+ * the sdvo flag gets lost in round trip: dtd->adjusted_mode->dtd
+ */
+ uint8_t dtd_sdvo_flags;
};
struct intel_sdvo_connector {
return false;
intel_sdvo_get_mode_from_dtd(adjusted_mode, &input_dtd);
+ intel_sdvo->dtd_sdvo_flags = input_dtd.part2.sdvo_flags;
return true;
}
* adjusted_mode.
*/
intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode);
+ if (intel_sdvo->is_tv || intel_sdvo->is_lvds)
+ input_dtd.part2.sdvo_flags = intel_sdvo->dtd_sdvo_flags;
if (!intel_sdvo_set_input_timing(intel_sdvo, &input_dtd))
DRM_INFO("Setting input timings on %s failed\n",
SDVO_NAME(intel_sdvo));
intel_sdvo_connector->output_flag = SDVO_OUTPUT_LVDS1;
}
- /* SDVO LVDS is cloneable because the SDVO encoder does the upscaling,
- * as opposed to native LVDS, where we upscale with the panel-fitter
- * (and hence only the native LVDS resolution could be cloned). */
- intel_sdvo->base.cloneable = true;
+ /* SDVO LVDS is not cloneable because the input mode gets adjusted by the encoder */
+ intel_sdvo->base.cloneable = false;
intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
if (!intel_sdvo_create_enhance_property(intel_sdvo, intel_sdvo_connector))
nv_wo32(gpuobj, i, 0x00000000);
}
+ if (gpuobj->node) {
+ nouveau_mm_free(&nv_gpuobj(gpuobj->parent)->heap,
+ &gpuobj->node);
+ }
+
if (gpuobj->heap.block_size)
nouveau_mm_fini(&gpuobj->heap);
int nodes = 0;
list_for_each_entry(node, &mm->nodes, nl_entry) {
- if (nodes++ == mm->heap_nodes)
+ if (WARN_ON(nodes++ == mm->heap_nodes))
return -EBUSY;
}
}
data = of_get_property(dn, "NVDA,BMP", &size);
- if (data) {
+ if (data && size) {
bios->size = size;
bios->data = kmalloc(bios->size, GFP_KERNEL);
if (bios->data)
goto out;
bios->size = nv_rd08(bios, 0x700002) * 512;
+ if (!bios->size)
+ goto out;
+
bios->data = kmalloc(bios->size, GFP_KERNEL);
if (bios->data) {
for (i = 0; i < bios->size; i++)
/* read entire bios image to system memory */
bios->size = nv_rd08(bios, 0x300002) * 512;
+ if (!bios->size)
+ goto out;
+
bios->data = kmalloc(bios->size, GFP_KERNEL);
if (bios->data) {
for (i = 0; i < bios->size; i++)
{
struct pci_dev *pdev = nv_device(bios)->pdev;
int ret, cnt, i;
- u8 data[3];
- if (!nouveau_acpi_rom_supported(pdev))
+ if (!nouveau_acpi_rom_supported(pdev)) {
+ bios->data = NULL;
return;
+ }
bios->size = 0;
- if (nouveau_acpi_get_bios_chunk(data, 0, 3) == 3)
- bios->size = data[2] * 512;
+ bios->data = kmalloc(4096, GFP_KERNEL);
+ if (bios->data) {
+ if (nouveau_acpi_get_bios_chunk(bios->data, 0, 4096) == 4096)
+ bios->size = bios->data[2] * 512;
+ kfree(bios->data);
+ }
+
+ if (!bios->size)
+ return;
bios->data = kmalloc(bios->size, GFP_KERNEL);
for (i = 0; bios->data && i < bios->size; i += cnt) {
static int
nouveau_bios_score(struct nouveau_bios *bios, const bool writeable)
{
- if (!bios->data || bios->data[0] != 0x55 || bios->data[1] != 0xAA) {
+ if (bios->size < 3 || !bios->data || bios->data[0] != 0x55 ||
+ bios->data[1] != 0xAA) {
nv_info(bios, "... signature not found\n");
return 0;
}
- if (nvbios_checksum(bios->data, bios->data[2] * 512)) {
+ if (nvbios_checksum(bios->data,
+ min_t(u32, bios->data[2] * 512, bios->size))) {
nv_info(bios, "... checksum invalid\n");
/* if a ro image is somewhat bad, it's probably all rubbish */
return writeable ? 2 : 1;
while (map->reg) {
if (map->reg == reg && *ver >= 0x20) {
u16 addr = (data += hdr);
+ *type = map->type;
while (cnt--) {
- if (nv_ro32(bios, data) == map->reg) {
- *type = map->type;
+ if (nv_ro32(bios, data) == map->reg)
return data;
- }
data += *len;
}
return addr;
while (map->reg) {
if (map->type == type && *ver >= 0x20) {
u16 addr = (data += hdr);
+ *reg = map->reg;
while (cnt--) {
- if (nv_ro32(bios, data) == map->reg) {
- *reg = map->reg;
+ if (nv_ro32(bios, data) == map->reg)
return data;
- }
data += *len;
}
return addr;
return ret;
priv->base.ram.stolen = (u64)nv_rd32(priv, 0x100e10) << 12;
+ priv->base.ram.type = NV_MEM_TYPE_STOLEN;
break;
default:
ret = nouveau_mm_init(&priv->base.vram, rsvd_head, size,
struct nv04_vmmgr_priv *priv;
int ret;
- if (!nouveau_boolopt(device->cfgopt, "NvPCIE", true)) {
+ if (pci_find_capability(device->pdev, PCI_CAP_ID_AGP) ||
+ !nouveau_boolopt(device->cfgopt, "NvPCIE", true)) {
return nouveau_object_ctor(parent, engine, &nv04_vmmgr_oclass,
data, size, pobject);
}
struct nv04_vmmgr_priv *priv;
int ret;
- if (!nouveau_boolopt(device->cfgopt, "NvPCIE", true)) {
+ if (pci_find_capability(device->pdev, PCI_CAP_ID_AGP) ||
+ !nouveau_boolopt(device->cfgopt, "NvPCIE", true)) {
return nouveau_object_ctor(parent, engine, &nv04_vmmgr_oclass,
data, size, pobject);
}
if (ret)
goto fail;
- ret = ttm_bo_reserve(&old_bo->bo, false, false, false, 0);
- if (ret)
- goto fail_unreserve;
+ if (likely(old_bo != new_bo)) {
+ ret = ttm_bo_reserve(&old_bo->bo, false, false, false, 0);
+ if (ret)
+ goto fail_unreserve;
+ }
return 0;
nouveau_bo_fence(new_bo, fence);
ttm_bo_unreserve(&new_bo->bo);
- nouveau_bo_fence(old_bo, fence);
- ttm_bo_unreserve(&old_bo->bo);
+ if (likely(old_bo != new_bo)) {
+ nouveau_bo_fence(old_bo, fence);
+ ttm_bo_unreserve(&old_bo->bo);
+ }
nouveau_bo_unpin(old_bo);
}
struct radeon_backlight_privdata *pdata;
struct radeon_encoder_atom_dig *dig;
u8 backlight_level;
+ char bl_name[16];
if (!radeon_encoder->enc_priv)
return;
memset(&props, 0, sizeof(props));
props.max_brightness = RADEON_MAX_BL_LEVEL;
props.type = BACKLIGHT_RAW;
- bd = backlight_device_register("radeon_bl", &drm_connector->kdev,
+ snprintf(bl_name, sizeof(bl_name),
+ "radeon_bl%d", dev->primary->index);
+ bd = backlight_device_register(bl_name, &drm_connector->kdev,
pdata, &radeon_atom_backlight_ops, &props);
if (IS_ERR(bd)) {
DRM_ERROR("Backlight registration failed\n");
case CAYMAN_SQ_EX_ALLOC_TABLE_SLOTS:
return true;
default:
+ DRM_ERROR("Invalid register 0x%x in CS\n", reg);
return false;
}
}
{
struct radeon_ring *ring = &rdev->ring[rdev->asic->vm.pt_ring_index];
uint32_t r600_flags = cayman_vm_page_flags(rdev, flags);
- int i;
- radeon_ring_write(ring, PACKET3(PACKET3_ME_WRITE, 1 + count * 2));
- radeon_ring_write(ring, pe);
- radeon_ring_write(ring, upper_32_bits(pe) & 0xff);
- for (i = 0; i < count; ++i) {
- uint64_t value = 0;
- if (flags & RADEON_VM_PAGE_SYSTEM) {
- value = radeon_vm_map_gart(rdev, addr);
- value &= 0xFFFFFFFFFFFFF000ULL;
- addr += incr;
-
- } else if (flags & RADEON_VM_PAGE_VALID) {
- value = addr;
- addr += incr;
- }
+ while (count) {
+ unsigned ndw = 1 + count * 2;
+ if (ndw > 0x3FFF)
+ ndw = 0x3FFF;
+
+ radeon_ring_write(ring, PACKET3(PACKET3_ME_WRITE, ndw));
+ radeon_ring_write(ring, pe);
+ radeon_ring_write(ring, upper_32_bits(pe) & 0xff);
+ for (; ndw > 1; ndw -= 2, --count, pe += 8) {
+ uint64_t value = 0;
+ if (flags & RADEON_VM_PAGE_SYSTEM) {
+ value = radeon_vm_map_gart(rdev, addr);
+ value &= 0xFFFFFFFFFFFFF000ULL;
+ addr += incr;
+
+ } else if (flags & RADEON_VM_PAGE_VALID) {
+ value = addr;
+ addr += incr;
+ }
- value |= r600_flags;
- radeon_ring_write(ring, value);
- radeon_ring_write(ring, upper_32_bits(value));
+ value |= r600_flags;
+ radeon_ring_write(ring, value);
+ radeon_ring_write(ring, upper_32_bits(value));
+ }
}
}
/* bits 0-7 are the VM contexts0-7 */
radeon_ring_write(ring, PACKET0(VM_INVALIDATE_REQUEST, 0));
radeon_ring_write(ring, 1 << vm->id);
+
+ /* sync PFP to ME, otherwise we might get invalid PFP reads */
+ radeon_ring_write(ring, PACKET3(PACKET3_PFP_SYNC_ME, 0));
+ radeon_ring_write(ring, 0x0);
}
#define PACKET3_MPEG_INDEX 0x3A
#define PACKET3_WAIT_REG_MEM 0x3C
#define PACKET3_MEM_WRITE 0x3D
+#define PACKET3_PFP_SYNC_ME 0x42
#define PACKET3_SURFACE_SYNC 0x43
# define PACKET3_CB0_DEST_BASE_ENA (1 << 6)
# define PACKET3_CB1_DEST_BASE_ENA (1 << 7)
atpx_arg_elements[1].integer.value = 0;
}
- status = acpi_evaluate_object(handle, "ATPX", &atpx_arg, &buffer);
+ status = acpi_evaluate_object(handle, NULL, &atpx_arg, &buffer);
/* Fail only if calling the method fails and ATPX is supported */
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
}
/**
- * radeon_atpx_pci_probe_handle - look up the ATRM and ATPX handles
+ * radeon_atpx_pci_probe_handle - look up the ATPX handle
*
* @pdev: pci device
*
- * Look up the ATPX and ATRM handles (all asics).
+ * Look up the ATPX handles (all asics).
* Returns true if the handles are found, false if not.
*/
static bool radeon_atpx_pci_probe_handle(struct pci_dev *pdev)
*/
void radeon_vram_location(struct radeon_device *rdev, struct radeon_mc *mc, u64 base)
{
+ uint64_t limit = (uint64_t)radeon_vram_limit << 20;
+
mc->vram_start = base;
if (mc->mc_vram_size > (0xFFFFFFFF - base + 1)) {
dev_warn(rdev->dev, "limiting VRAM to PCI aperture size\n");
mc->mc_vram_size = mc->aper_size;
}
mc->vram_end = mc->vram_start + mc->mc_vram_size - 1;
- if (radeon_vram_limit && radeon_vram_limit < mc->real_vram_size)
- mc->real_vram_size = radeon_vram_limit;
+ if (limit && limit < mc->real_vram_size)
+ mc->real_vram_size = limit;
dev_info(rdev->dev, "VRAM: %lluM 0x%016llX - 0x%016llX (%lluM used)\n",
mc->mc_vram_size >> 20, mc->vram_start,
mc->vram_end, mc->real_vram_size >> 20);
return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
}
+/**
+ * radeon_check_pot_argument - check that argument is a power of two
+ *
+ * @arg: value to check
+ *
+ * Validates that a certain argument is a power of two (all asics).
+ * Returns true if argument is valid.
+ */
+static bool radeon_check_pot_argument(int arg)
+{
+ return (arg & (arg - 1)) == 0;
+}
+
/**
* radeon_check_arguments - validate module params
*
static void radeon_check_arguments(struct radeon_device *rdev)
{
/* vramlimit must be a power of two */
- switch (radeon_vram_limit) {
- case 0:
- case 4:
- case 8:
- case 16:
- case 32:
- case 64:
- case 128:
- case 256:
- case 512:
- case 1024:
- case 2048:
- case 4096:
- break;
- default:
+ if (!radeon_check_pot_argument(radeon_vram_limit)) {
dev_warn(rdev->dev, "vram limit (%d) must be a power of 2\n",
radeon_vram_limit);
radeon_vram_limit = 0;
- break;
}
- radeon_vram_limit = radeon_vram_limit << 20;
+
/* gtt size must be power of two and greater or equal to 32M */
- switch (radeon_gart_size) {
- case 4:
- case 8:
- case 16:
+ if (radeon_gart_size < 32) {
dev_warn(rdev->dev, "gart size (%d) too small forcing to 512M\n",
radeon_gart_size);
radeon_gart_size = 512;
- break;
- case 32:
- case 64:
- case 128:
- case 256:
- case 512:
- case 1024:
- case 2048:
- case 4096:
- break;
- default:
+
+ } else if (!radeon_check_pot_argument(radeon_gart_size)) {
dev_warn(rdev->dev, "gart size (%d) must be a power of 2\n",
radeon_gart_size);
radeon_gart_size = 512;
- break;
}
- rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
+ rdev->mc.gtt_size = (uint64_t)radeon_gart_size << 20;
+
/* AGP mode can only be -1, 1, 2, 4, 8 */
switch (radeon_agpmode) {
case -1:
DRM_INFO("GART: num cpu pages %u, num gpu pages %u\n",
rdev->gart.num_cpu_pages, rdev->gart.num_gpu_pages);
/* Allocate pages table */
- rdev->gart.pages = kzalloc(sizeof(void *) * rdev->gart.num_cpu_pages,
- GFP_KERNEL);
+ rdev->gart.pages = vzalloc(sizeof(void *) * rdev->gart.num_cpu_pages);
if (rdev->gart.pages == NULL) {
radeon_gart_fini(rdev);
return -ENOMEM;
}
- rdev->gart.pages_addr = kzalloc(sizeof(dma_addr_t) *
- rdev->gart.num_cpu_pages, GFP_KERNEL);
+ rdev->gart.pages_addr = vzalloc(sizeof(dma_addr_t) *
+ rdev->gart.num_cpu_pages);
if (rdev->gart.pages_addr == NULL) {
radeon_gart_fini(rdev);
return -ENOMEM;
radeon_gart_unbind(rdev, 0, rdev->gart.num_cpu_pages);
}
rdev->gart.ready = false;
- kfree(rdev->gart.pages);
- kfree(rdev->gart.pages_addr);
+ vfree(rdev->gart.pages);
+ vfree(rdev->gart.pages_addr);
rdev->gart.pages = NULL;
rdev->gart.pages_addr = NULL;
*
* Global and local mutex must be locked!
*/
-int radeon_vm_evict(struct radeon_device *rdev, struct radeon_vm *vm)
+static int radeon_vm_evict(struct radeon_device *rdev, struct radeon_vm *vm)
{
struct radeon_vm *vm_evict;
pte = radeon_sa_bo_gpu_addr(vm->page_tables[pt_idx]);
pte += (addr & mask) * 8;
- if (((last_pte + 8 * count) != pte) ||
- ((count + nptes) > 1 << 11)) {
+ if ((last_pte + 8 * count) != pte) {
if (count) {
radeon_asic_vm_set_page(rdev, last_pte,
if (RADEON_VM_BLOCK_SIZE > 11)
/* reserve space for one header for every 2k dwords */
- ndw += (nptes >> 11) * 3;
+ ndw += (nptes >> 11) * 4;
else
/* reserve space for one header for
every (1 << BLOCK_SIZE) entries */
- ndw += (nptes >> RADEON_VM_BLOCK_SIZE) * 3;
+ ndw += (nptes >> RADEON_VM_BLOCK_SIZE) * 4;
/* reserve space for pte addresses */
ndw += nptes * 2;
/* reserve space for one header for every 2k dwords */
- ndw += (npdes >> 11) * 3;
+ ndw += (npdes >> 11) * 4;
/* reserve space for pde addresses */
ndw += npdes * 2;
struct drm_gem_object **obj)
{
struct radeon_bo *robj;
+ unsigned long max_size;
int r;
*obj = NULL;
if (alignment < PAGE_SIZE) {
alignment = PAGE_SIZE;
}
+
+ /* maximun bo size is the minimun btw visible vram and gtt size */
+ max_size = min(rdev->mc.visible_vram_size, rdev->mc.gtt_size);
+ if (size > max_size) {
+ printk(KERN_WARNING "%s:%d alloc size %dMb bigger than %ldMb limit\n",
+ __func__, __LINE__, size >> 20, max_size >> 20);
+ return -ENOMEM;
+ }
+
+retry:
r = radeon_bo_create(rdev, size, alignment, kernel, initial_domain, NULL, &robj);
if (r) {
- if (r != -ERESTARTSYS)
+ if (r != -ERESTARTSYS) {
+ if (initial_domain == RADEON_GEM_DOMAIN_VRAM) {
+ initial_domain |= RADEON_GEM_DOMAIN_GTT;
+ goto retry;
+ }
DRM_ERROR("Failed to allocate GEM object (%d, %d, %u, %d)\n",
size, initial_domain, alignment, r);
+ }
return r;
}
*obj = &robj->gem_base;
struct backlight_properties props;
struct radeon_backlight_privdata *pdata;
uint8_t backlight_level;
+ char bl_name[16];
if (!radeon_encoder->enc_priv)
return;
memset(&props, 0, sizeof(props));
props.max_brightness = RADEON_MAX_BL_LEVEL;
props.type = BACKLIGHT_RAW;
- bd = backlight_device_register("radeon_bl", &drm_connector->kdev,
+ snprintf(bl_name, sizeof(bl_name),
+ "radeon_bl%d", dev->primary->index);
+ bd = backlight_device_register(bl_name, &drm_connector->kdev,
pdata, &radeon_backlight_ops, &props);
if (IS_ERR(bd)) {
DRM_ERROR("Backlight registration failed\n");
struct radeon_bo *bo;
enum ttm_bo_type type;
unsigned long page_align = roundup(byte_align, PAGE_SIZE) >> PAGE_SHIFT;
- unsigned long max_size = 0;
size_t acc_size;
int r;
}
*bo_ptr = NULL;
- /* maximun bo size is the minimun btw visible vram and gtt size */
- max_size = min(rdev->mc.visible_vram_size, rdev->mc.gtt_size);
- if ((page_align << PAGE_SHIFT) >= max_size) {
- printk(KERN_WARNING "%s:%d alloc size %ldM bigger than %ldMb limit\n",
- __func__, __LINE__, page_align >> (20 - PAGE_SHIFT), max_size >> 20);
- return -ENOMEM;
- }
-
acc_size = ttm_bo_dma_acc_size(&rdev->mman.bdev, size,
sizeof(struct radeon_bo));
-retry:
bo = kzalloc(sizeof(struct radeon_bo), GFP_KERNEL);
if (bo == NULL)
return -ENOMEM;
acc_size, sg, &radeon_ttm_bo_destroy);
up_read(&rdev->pm.mclk_lock);
if (unlikely(r != 0)) {
- if (r != -ERESTARTSYS) {
- if (domain == RADEON_GEM_DOMAIN_VRAM) {
- domain |= RADEON_GEM_DOMAIN_GTT;
- goto retry;
- }
- dev_err(rdev->dev,
- "object_init failed for (%lu, 0x%08X)\n",
- size, domain);
- }
return r;
}
*bo_ptr = bo;
{
struct radeon_ring *ring = &rdev->ring[rdev->asic->vm.pt_ring_index];
uint32_t r600_flags = cayman_vm_page_flags(rdev, flags);
- int i;
- uint64_t value;
- radeon_ring_write(ring, PACKET3(PACKET3_WRITE_DATA, 2 + count * 2));
- radeon_ring_write(ring, (WRITE_DATA_ENGINE_SEL(0) |
- WRITE_DATA_DST_SEL(1)));
- radeon_ring_write(ring, pe);
- radeon_ring_write(ring, upper_32_bits(pe));
- for (i = 0; i < count; ++i) {
- if (flags & RADEON_VM_PAGE_SYSTEM) {
- value = radeon_vm_map_gart(rdev, addr);
- value &= 0xFFFFFFFFFFFFF000ULL;
- } else if (flags & RADEON_VM_PAGE_VALID)
- value = addr;
- else
- value = 0;
- addr += incr;
- value |= r600_flags;
- radeon_ring_write(ring, value);
- radeon_ring_write(ring, upper_32_bits(value));
+ while (count) {
+ unsigned ndw = 2 + count * 2;
+ if (ndw > 0x3FFE)
+ ndw = 0x3FFE;
+
+ radeon_ring_write(ring, PACKET3(PACKET3_WRITE_DATA, ndw));
+ radeon_ring_write(ring, (WRITE_DATA_ENGINE_SEL(0) |
+ WRITE_DATA_DST_SEL(1)));
+ radeon_ring_write(ring, pe);
+ radeon_ring_write(ring, upper_32_bits(pe));
+ for (; ndw > 2; ndw -= 2, --count, pe += 8) {
+ uint64_t value;
+ if (flags & RADEON_VM_PAGE_SYSTEM) {
+ value = radeon_vm_map_gart(rdev, addr);
+ value &= 0xFFFFFFFFFFFFF000ULL;
+ } else if (flags & RADEON_VM_PAGE_VALID)
+ value = addr;
+ else
+ value = 0;
+ addr += incr;
+ value |= r600_flags;
+ radeon_ring_write(ring, value);
+ radeon_ring_write(ring, upper_32_bits(value));
+ }
}
}
radeon_ring_write(ring, VM_INVALIDATE_REQUEST >> 2);
radeon_ring_write(ring, 0);
radeon_ring_write(ring, 1 << vm->id);
+
+ /* sync PFP to ME, otherwise we might get invalid PFP reads */
+ radeon_ring_write(ring, PACKET3(PACKET3_PFP_SYNC_ME, 0));
+ radeon_ring_write(ring, 0x0);
}
/*
goto done;
}
+ platform_set_drvdata(pdev, sdev);
+
done:
if (ret)
shmob_drm_unload(dev);
#if CONFIG_PM_SLEEP
static int shmob_drm_pm_suspend(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct drm_device *ddev = platform_get_drvdata(pdev);
- struct shmob_drm_device *sdev = ddev->dev_private;
+ struct shmob_drm_device *sdev = dev_get_drvdata(dev);
- drm_kms_helper_poll_disable(ddev);
+ drm_kms_helper_poll_disable(sdev->ddev);
shmob_drm_crtc_suspend(&sdev->crtc);
return 0;
static int shmob_drm_pm_resume(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct drm_device *ddev = platform_get_drvdata(pdev);
- struct shmob_drm_device *sdev = ddev->dev_private;
+ struct shmob_drm_device *sdev = dev_get_drvdata(dev);
mutex_lock(&sdev->ddev->mode_config.mutex);
shmob_drm_crtc_resume(&sdev->crtc);
if (unlikely(ret != 0))
return ret;
+retry_reserve:
spin_lock(&glob->lru_lock);
if (unlikely(list_empty(&bo->ddestroy))) {
return 0;
}
- ret = ttm_bo_reserve_locked(bo, interruptible,
- no_wait_reserve, false, 0);
+ ret = ttm_bo_reserve_locked(bo, false, true, false, 0);
- if (unlikely(ret != 0)) {
+ if (unlikely(ret == -EBUSY)) {
spin_unlock(&glob->lru_lock);
- return ret;
+ if (likely(!no_wait_reserve))
+ ret = ttm_bo_wait_unreserved(bo, interruptible);
+ if (unlikely(ret != 0))
+ return ret;
+
+ goto retry_reserve;
}
+ BUG_ON(ret != 0);
+
/**
* We can re-check for sync object without taking
* the bo::lock since setting the sync object requires
no_wait_reserve, no_wait_gpu);
kref_put(&bo->list_kref, ttm_bo_release_list);
- if (likely(ret == 0 || ret == -ERESTARTSYS))
- return ret;
-
- goto retry;
+ return ret;
}
- ret = ttm_bo_reserve_locked(bo, false, no_wait_reserve, false, 0);
+ ret = ttm_bo_reserve_locked(bo, false, true, false, 0);
if (unlikely(ret == -EBUSY)) {
spin_unlock(&glob->lru_lock);
- if (likely(!no_wait_gpu))
+ if (likely(!no_wait_reserve))
ret = ttm_bo_wait_unreserved(bo, interruptible);
kref_put(&bo->list_kref, ttm_bo_release_list);
if (ret != 0) {
err = ret;
- goto errorout;
+ goto error0;
}
ret = hv_ringbuffer_init(
&newchannel->inbound, in, recv_ringbuffer_size);
if (ret != 0) {
err = ret;
- goto errorout;
+ goto error0;
}
if (ret != 0) {
err = ret;
- goto errorout;
+ goto error0;
}
/* Create and init the channel open message */
GFP_KERNEL);
if (!open_info) {
err = -ENOMEM;
- goto errorout;
+ goto error0;
}
init_completion(&open_info->waitevent);
if (userdatalen > MAX_USER_DEFINED_BYTES) {
err = -EINVAL;
- goto errorout;
+ goto error0;
}
if (userdatalen)
sizeof(struct vmbus_channel_open_channel));
if (ret != 0)
- goto cleanup;
+ goto error1;
t = wait_for_completion_timeout(&open_info->waitevent, 5*HZ);
if (t == 0) {
err = -ETIMEDOUT;
- goto errorout;
+ goto error1;
}
if (open_info->response.open_result.status)
err = open_info->response.open_result.status;
-cleanup:
spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags);
list_del(&open_info->msglistentry);
spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, flags);
kfree(open_info);
return err;
-errorout:
- hv_ringbuffer_cleanup(&newchannel->outbound);
- hv_ringbuffer_cleanup(&newchannel->inbound);
+error1:
+ spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags);
+ list_del(&open_info->msglistentry);
+ spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, flags);
+
+error0:
free_pages((unsigned long)out,
get_order(send_ringbuffer_size + recv_ringbuffer_size));
kfree(open_info);
obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o
obj-$(CONFIG_I2C_MUX) += i2c-mux.o
obj-y += algos/ busses/ muxes/
+obj-$(CONFIG_I2C_STUB) += i2c-stub.o
ccflags-$(CONFIG_I2C_DEBUG_CORE) := -DDEBUG
CFLAGS_i2c-core.o := -Wno-deprecated-declarations
tristate "Intel 82801 (ICH/PCH)"
depends on PCI
select CHECK_SIGNATURE if X86 && DMI
- select GPIOLIB if I2C_MUX
help
If you say yes to this option, support will be included for the Intel
801 family of mainboard I2C interfaces. Specifically, the following
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
-obj-$(CONFIG_I2C_STUB) += i2c-stub.o
obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
#include <linux/wait.h>
#include <linux/err.h>
-#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE
+#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
+ defined CONFIG_DMI
#include <linux/gpio.h>
#include <linux/i2c-mux-gpio.h>
#include <linux/platform_device.h>
int len;
u8 *data;
-#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE
+#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
+ defined CONFIG_DMI
const struct i801_mux_config *mux_drvdata;
struct platform_device *mux_pdev;
#endif
static void __devinit i801_probe_optional_slaves(struct i801_priv *priv) {}
#endif /* CONFIG_X86 && CONFIG_DMI */
-#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE
+#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
+ defined CONFIG_DMI
static struct i801_mux_config i801_mux_config_asus_z8_d12 = {
.gpio_chip = "gpio_ich",
.values = { 0x02, 0x03 },
id = dmi_first_match(mux_dmi_table);
if (id) {
- /* Remove from branch classes from trunk */
+ /* Remove branch classes from trunk */
mux_config = id->driver_data;
for (i = 0; i < mux_config->n_values; i++)
class &= ~mux_config->classes[i];
i2c-stub.c - I2C/SMBus chip emulator
Copyright (c) 2004 Mark M. Hoffman <mhoffman@lightlink.com>
- Copyright (C) 2007 Jean Delvare <khali@linux-fr.org>
+ Copyright (C) 2007, 2012 Jean Delvare <khali@linux-fr.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
static struct stub_chip *stub_chips;
/* Return negative errno on error. */
-static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
- char read_write, u8 command, int size, union i2c_smbus_data * data)
+static s32 stub_xfer(struct i2c_adapter *adap, u16 addr, unsigned short flags,
+ char read_write, u8 command, int size, union i2c_smbus_data *data)
{
s32 ret;
int i, len;
case I2C_SMBUS_BYTE:
if (read_write == I2C_SMBUS_WRITE) {
chip->pointer = command;
- dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, "
- "wrote 0x%02x.\n",
- addr, command);
+ dev_dbg(&adap->dev,
+ "smbus byte - addr 0x%02x, wrote 0x%02x.\n",
+ addr, command);
} else {
data->byte = chip->words[chip->pointer++] & 0xff;
- dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, "
- "read 0x%02x.\n",
- addr, data->byte);
+ dev_dbg(&adap->dev,
+ "smbus byte - addr 0x%02x, read 0x%02x.\n",
+ addr, data->byte);
}
ret = 0;
if (read_write == I2C_SMBUS_WRITE) {
chip->words[command] &= 0xff00;
chip->words[command] |= data->byte;
- dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, "
- "wrote 0x%02x at 0x%02x.\n",
- addr, data->byte, command);
+ dev_dbg(&adap->dev,
+ "smbus byte data - addr 0x%02x, wrote 0x%02x at 0x%02x.\n",
+ addr, data->byte, command);
} else {
data->byte = chip->words[command] & 0xff;
- dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, "
- "read 0x%02x at 0x%02x.\n",
- addr, data->byte, command);
+ dev_dbg(&adap->dev,
+ "smbus byte data - addr 0x%02x, read 0x%02x at 0x%02x.\n",
+ addr, data->byte, command);
}
chip->pointer = command + 1;
case I2C_SMBUS_WORD_DATA:
if (read_write == I2C_SMBUS_WRITE) {
chip->words[command] = data->word;
- dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, "
- "wrote 0x%04x at 0x%02x.\n",
- addr, data->word, command);
+ dev_dbg(&adap->dev,
+ "smbus word data - addr 0x%02x, wrote 0x%04x at 0x%02x.\n",
+ addr, data->word, command);
} else {
data->word = chip->words[command];
- dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, "
- "read 0x%04x at 0x%02x.\n",
- addr, data->word, command);
+ dev_dbg(&adap->dev,
+ "smbus word data - addr 0x%02x, read 0x%04x at 0x%02x.\n",
+ addr, data->word, command);
}
ret = 0;
chip->words[command + i] &= 0xff00;
chip->words[command + i] |= data->block[1 + i];
}
- dev_dbg(&adap->dev, "i2c block data - addr 0x%02x, "
- "wrote %d bytes at 0x%02x.\n",
- addr, len, command);
+ dev_dbg(&adap->dev,
+ "i2c block data - addr 0x%02x, wrote %d bytes at 0x%02x.\n",
+ addr, len, command);
} else {
for (i = 0; i < len; i++) {
data->block[1 + i] =
chip->words[command + i] & 0xff;
}
- dev_dbg(&adap->dev, "i2c block data - addr 0x%02x, "
- "read %d bytes at 0x%02x.\n",
- addr, len, command);
+ dev_dbg(&adap->dev,
+ "i2c block data - addr 0x%02x, read %d bytes at 0x%02x.\n",
+ addr, len, command);
}
ret = 0;
int i, ret;
if (!chip_addr[0]) {
- printk(KERN_ERR "i2c-stub: Please specify a chip address\n");
+ pr_err("i2c-stub: Please specify a chip address\n");
return -ENODEV;
}
for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) {
if (chip_addr[i] < 0x03 || chip_addr[i] > 0x77) {
- printk(KERN_ERR "i2c-stub: Invalid chip address "
- "0x%02x\n", chip_addr[i]);
+ pr_err("i2c-stub: Invalid chip address 0x%02x\n",
+ chip_addr[i]);
return -EINVAL;
}
- printk(KERN_INFO "i2c-stub: Virtual chip at 0x%02x\n",
- chip_addr[i]);
+ pr_info("i2c-stub: Virtual chip at 0x%02x\n", chip_addr[i]);
}
/* Allocate memory for all chips at once */
stub_chips = kzalloc(i * sizeof(struct stub_chip), GFP_KERNEL);
if (!stub_chips) {
- printk(KERN_ERR "i2c-stub: Out of memory\n");
+ pr_err("i2c-stub: Out of memory\n");
return -ENOMEM;
}
module_init(i2c_stub_init);
module_exit(i2c_stub_exit);
-
source "drivers/iio/dac/Kconfig"
source "drivers/iio/common/Kconfig"
source "drivers/iio/gyro/Kconfig"
-source "drivers/iio/light/Kconfig"
source "drivers/iio/magnetometer/Kconfig"
endif # IIO
obj-y += dac/
obj-y += common/
obj-y += gyro/
-obj-y += light/
obj-y += magnetometer/
ret = alloc_pbl(mhp, npages);
if (ret) {
kfree(page_list);
- goto err_pbl;
+ goto err;
}
ret = write_pbl(&mhp->rhp->rdev, page_list, mhp->attr.pbl_addr,
{
if (index >= NUM_ALIAS_GUID_PER_PORT) {
pr_err("%s: ERROR: asked for index:%d\n", __func__, index);
- return (__force __be64) ((u64) 0xFFFFFFFFFFFFFFFFUL);
+ return (__force __be64) -1;
}
return *(__be64 *)&dev->sriov.demux[port - 1].guid_cache[index];
}
}
-static int get_pkey_phys_indices(struct mlx4_ib_dev *ibdev, u8 port, u8 ph_pkey_ix,
- u8 *full_pk_ix, u8 *partial_pk_ix,
- int *is_full_member)
+static int find_slave_port_pkey_ix(struct mlx4_ib_dev *dev, int slave,
+ u8 port, u16 pkey, u16 *ix)
{
- u16 search_pkey;
- int fm;
- int err = 0;
- u16 pk;
+ int i, ret;
+ u8 unassigned_pkey_ix, pkey_ix, partial_ix = 0xFF;
+ u16 slot_pkey;
- err = ib_get_cached_pkey(&ibdev->ib_dev, port, ph_pkey_ix, &search_pkey);
- if (err)
- return err;
+ if (slave == mlx4_master_func_num(dev->dev))
+ return ib_find_cached_pkey(&dev->ib_dev, port, pkey, ix);
- fm = (search_pkey & 0x8000) ? 1 : 0;
- if (fm) {
- *full_pk_ix = ph_pkey_ix;
- search_pkey &= 0x7FFF;
- } else {
- *partial_pk_ix = ph_pkey_ix;
- search_pkey |= 0x8000;
- }
+ unassigned_pkey_ix = dev->dev->phys_caps.pkey_phys_table_len[port] - 1;
- if (ib_find_exact_cached_pkey(&ibdev->ib_dev, port, search_pkey, &pk))
- pk = 0xFFFF;
+ for (i = 0; i < dev->dev->caps.pkey_table_len[port]; i++) {
+ if (dev->pkeys.virt2phys_pkey[slave][port - 1][i] == unassigned_pkey_ix)
+ continue;
- if (fm)
- *partial_pk_ix = (pk & 0xFF);
- else
- *full_pk_ix = (pk & 0xFF);
+ pkey_ix = dev->pkeys.virt2phys_pkey[slave][port - 1][i];
- *is_full_member = fm;
- return err;
+ ret = ib_get_cached_pkey(&dev->ib_dev, port, pkey_ix, &slot_pkey);
+ if (ret)
+ continue;
+ if ((slot_pkey & 0x7FFF) == (pkey & 0x7FFF)) {
+ if (slot_pkey & 0x8000) {
+ *ix = (u16) pkey_ix;
+ return 0;
+ } else {
+ /* take first partial pkey index found */
+ if (partial_ix == 0xFF)
+ partial_ix = pkey_ix;
+ }
+ }
+ }
+
+ if (partial_ix < 0xFF) {
+ *ix = (u16) partial_ix;
+ return 0;
+ }
+
+ return -EINVAL;
}
int mlx4_ib_send_to_slave(struct mlx4_ib_dev *dev, int slave, u8 port,
unsigned tun_tx_ix = 0;
int dqpn;
int ret = 0;
- int i;
- int is_full_member = 0;
u16 tun_pkey_ix;
- u8 ph_pkey_ix, full_pk_ix = 0, partial_pk_ix = 0;
+ u16 cached_pkey;
if (dest_qpt > IB_QPT_GSI)
return -EINVAL;
else
tun_qp = &tun_ctx->qp[1];
- /* compute pkey index for slave */
- /* get physical pkey -- virtualized Dom0 pkey to phys*/
+ /* compute P_Key index to put in tunnel header for slave */
if (dest_qpt) {
- ph_pkey_ix =
- dev->pkeys.virt2phys_pkey[mlx4_master_func_num(dev->dev)][port - 1][wc->pkey_index];
-
- /* now, translate this to the slave pkey index */
- ret = get_pkey_phys_indices(dev, port, ph_pkey_ix, &full_pk_ix,
- &partial_pk_ix, &is_full_member);
+ u16 pkey_ix;
+ ret = ib_get_cached_pkey(&dev->ib_dev, port, wc->pkey_index, &cached_pkey);
if (ret)
return -EINVAL;
- for (i = 0; i < dev->dev->caps.pkey_table_len[port]; i++) {
- if ((dev->pkeys.virt2phys_pkey[slave][port - 1][i] == full_pk_ix) ||
- (is_full_member &&
- (dev->pkeys.virt2phys_pkey[slave][port - 1][i] == partial_pk_ix)))
- break;
- }
- if (i == dev->dev->caps.pkey_table_len[port])
+ ret = find_slave_port_pkey_ix(dev, slave, port, cached_pkey, &pkey_ix);
+ if (ret)
return -EINVAL;
- tun_pkey_ix = i;
+ tun_pkey_ix = pkey_ix;
} else
tun_pkey_ix = dev->pkeys.virt2phys_pkey[slave][port - 1][0];
ib_query_ah(dev->sm_ah[ctx->port - 1], &ah_attr);
- wc.pkey_index = 0;
+ if (ib_find_cached_pkey(&dev->ib_dev, ctx->port, IB_DEFAULT_PKEY_FULL, &wc.pkey_index))
+ return -EINVAL;
wc.sl = 0;
wc.dlid_path_bits = 0;
wc.port_num = ctx->port;
unsigned long end;
int count;
- if (ctx->flushing)
- return;
-
- ctx->flushing = 1;
for (i = 0; i < MAX_VFS; ++i)
clean_vf_mcast(ctx, i);
force_clean_group(group);
}
mutex_unlock(&ctx->mcg_table_lock);
-
- if (!destroy_wq)
- ctx->flushing = 0;
}
struct clean_work {
struct clean_work *cw = container_of(work, struct clean_work, work);
_mlx4_ib_mcg_port_cleanup(cw->ctx, cw->destroy_wq);
+ cw->ctx->flushing = 0;
kfree(cw);
}
{
struct clean_work *work;
+ if (ctx->flushing)
+ return;
+
+ ctx->flushing = 1;
+
if (destroy_wq) {
_mlx4_ib_mcg_port_cleanup(ctx, destroy_wq);
+ ctx->flushing = 0;
return;
}
work = kmalloc(sizeof *work, GFP_KERNEL);
if (!work) {
+ ctx->flushing = 0;
mcg_warn("failed allocating work for cleanup\n");
return;
}
features->pktlen = WACOM_PKGLEN_TPC2FG;
}
- if (features->type == MTSCREEN)
+ if (features->type == MTSCREEN || WACOM_24HDT)
features->pktlen = WACOM_PKGLEN_MTOUCH;
if (features->type == BAMBOO_PT) {
features->x_max =
get_unaligned_le16(&report[i + 8]);
i += 15;
+ } else if (features->type == WACOM_24HDT) {
+ features->x_max =
+ get_unaligned_le16(&report[i + 3]);
+ features->x_phy =
+ get_unaligned_le16(&report[i + 8]);
+ features->unit = report[i - 1];
+ features->unitExpo = report[i - 3];
+ i += 12;
} else {
features->x_max =
get_unaligned_le16(&report[i + 3]);
features->y_phy =
get_unaligned_le16(&report[i + 6]);
i += 7;
+ } else if (type == WACOM_24HDT) {
+ features->y_max =
+ get_unaligned_le16(&report[i + 3]);
+ features->y_phy =
+ get_unaligned_le16(&report[i - 2]);
+ i += 7;
} else if (type == BAMBOO_PT) {
features->y_phy =
get_unaligned_le16(&report[i + 3]);
/* MT Tablet PC touch */
return wacom_set_device_mode(intf, 3, 4, 4);
}
+ else if (features->type == WACOM_24HDT) {
+ return wacom_set_device_mode(intf, 18, 3, 2);
+ }
} else if (features->device_type == BTN_TOOL_PEN) {
if (features->type <= BAMBOO_PT && features->type != WIRELESS) {
return wacom_set_device_mode(intf, 2, 2, 2);
static LIST_HEAD(wacom_udev_list);
static DEFINE_MUTEX(wacom_udev_list_lock);
+static struct usb_device *wacom_get_sibling(struct usb_device *dev, int vendor, int product)
+{
+ int port1;
+ struct usb_device *sibling;
+
+ if (vendor == 0 && product == 0)
+ return dev;
+
+ if (dev->parent == NULL)
+ return NULL;
+
+ usb_hub_for_each_child(dev->parent, port1, sibling) {
+ struct usb_device_descriptor *d;
+ if (sibling == NULL)
+ continue;
+
+ d = &sibling->descriptor;
+ if (d->idVendor == vendor && d->idProduct == product)
+ return sibling;
+ }
+
+ return NULL;
+}
+
static struct wacom_usbdev_data *wacom_get_usbdev_data(struct usb_device *dev)
{
struct wacom_usbdev_data *data;
strlcpy(wacom_wac->name, features->name, sizeof(wacom_wac->name));
if (features->quirks & WACOM_QUIRK_MULTI_INPUT) {
+ struct usb_device *other_dev;
+
/* Append the device type to the name */
strlcat(wacom_wac->name,
features->device_type == BTN_TOOL_PEN ?
" Pen" : " Finger",
sizeof(wacom_wac->name));
- error = wacom_add_shared_data(wacom_wac, dev);
+
+ other_dev = wacom_get_sibling(dev, features->oVid, features->oPid);
+ if (other_dev == NULL || wacom_get_usbdev_data(other_dev) == NULL)
+ other_dev = dev;
+ error = wacom_add_shared_data(wacom_wac, other_dev);
if (error)
goto fail3;
}
return -1;
}
+static int int_dist(int x1, int y1, int x2, int y2)
+{
+ int x = x2 - x1;
+ int y = y2 - y1;
+
+ return int_sqrt(x*x + y*y);
+}
+
+static int wacom_24hdt_irq(struct wacom_wac *wacom)
+{
+ struct input_dev *input = wacom->input;
+ char *data = wacom->data;
+ int i;
+ int current_num_contacts = data[61];
+ int contacts_to_send = 0;
+
+ /*
+ * First packet resets the counter since only the first
+ * packet in series will have non-zero current_num_contacts.
+ */
+ if (current_num_contacts)
+ wacom->num_contacts_left = current_num_contacts;
+
+ /* There are at most 4 contacts per packet */
+ contacts_to_send = min(4, wacom->num_contacts_left);
+
+ for (i = 0; i < contacts_to_send; i++) {
+ int offset = (WACOM_BYTES_PER_24HDT_PACKET * i) + 1;
+ bool touch = data[offset] & 0x1 && !wacom->shared->stylus_in_proximity;
+ int id = data[offset + 1];
+ int slot = find_slot_from_contactid(wacom, id);
+
+ if (slot < 0)
+ continue;
+ input_mt_slot(input, slot);
+ input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
+
+ if (touch) {
+ int t_x = le16_to_cpup((__le16 *)&data[offset + 2]);
+ int c_x = le16_to_cpup((__le16 *)&data[offset + 4]);
+ int t_y = le16_to_cpup((__le16 *)&data[offset + 6]);
+ int c_y = le16_to_cpup((__le16 *)&data[offset + 8]);
+ int w = le16_to_cpup((__le16 *)&data[offset + 10]);
+ int h = le16_to_cpup((__le16 *)&data[offset + 12]);
+
+ input_report_abs(input, ABS_MT_POSITION_X, t_x);
+ input_report_abs(input, ABS_MT_POSITION_Y, t_y);
+ input_report_abs(input, ABS_MT_TOUCH_MAJOR, min(w,h));
+ input_report_abs(input, ABS_MT_WIDTH_MAJOR, min(w, h) + int_dist(t_x, t_y, c_x, c_y));
+ input_report_abs(input, ABS_MT_WIDTH_MINOR, min(w, h));
+ input_report_abs(input, ABS_MT_ORIENTATION, w > h);
+ }
+ wacom->slots[slot] = touch ? id : -1;
+ }
+
+ input_mt_report_pointer_emulation(input, true);
+
+ wacom->num_contacts_left -= contacts_to_send;
+ if (wacom->num_contacts_left <= 0)
+ wacom->num_contacts_left = 0;
+
+ return 1;
+}
+
static int wacom_mt_touch(struct wacom_wac *wacom)
{
struct input_dev *input = wacom->input;
sync = wacom_intuos_irq(wacom_wac);
break;
+ case WACOM_24HDT:
+ sync = wacom_24hdt_irq(wacom_wac);
+ break;
+
case INTUOS5S:
case INTUOS5:
case INTUOS5L:
/* these device have multiple inputs */
if (features->type >= WIRELESS ||
- (features->type >= INTUOS5S && features->type <= INTUOS5L))
+ (features->type >= INTUOS5S && features->type <= INTUOS5L) ||
+ (features->oVid && features->oPid))
features->quirks |= WACOM_QUIRK_MULTI_INPUT;
/* quirk for bamboo touch with 2 low res touches */
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
break;
+ case WACOM_24HDT:
+ if (features->device_type == BTN_TOOL_FINGER) {
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, features->x_max, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, features->x_max, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_WIDTH_MINOR, 0, features->y_max, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0);
+ }
+ /* fall through */
+
case MTSCREEN:
if (features->device_type == BTN_TOOL_FINGER) {
wacom_wac->slots = kmalloc(features->touch_max *
{ "Wacom Cintiq 24HD", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047,
63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
static const struct wacom_features wacom_features_0xF8 =
- { "Wacom Cintiq 24HD touch", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047,
- 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+ { "Wacom Cintiq 24HD touch", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047, /* Pen */
+ 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf6 };
+static const struct wacom_features wacom_features_0xF6 =
+ { "Wacom Cintiq 24HD touch", .type = WACOM_24HDT, /* Touch */
+ .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf8, .touch_max = 10 };
static const struct wacom_features wacom_features_0x3F =
{ "Wacom Cintiq 21UX", WACOM_PKGLEN_INTUOS, 87200, 65600, 1023,
63, CINTIQ, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
{ USB_DEVICE_WACOM(0x47) },
{ USB_DEVICE_WACOM(0xF4) },
{ USB_DEVICE_WACOM(0xF8) },
+ { USB_DEVICE_WACOM(0xF6) },
{ USB_DEVICE_WACOM(0xFA) },
{ USB_DEVICE_LENOVO(0x6004) },
{ }
/* wacom data size per MT contact */
#define WACOM_BYTES_PER_MT_PACKET 11
+#define WACOM_BYTES_PER_24HDT_PACKET 14
/* device IDs */
#define STYLUS_DEVICE_ID 0x02
#define WACOM_REPORT_TPCHID 15
#define WACOM_REPORT_TPCST 16
#define WACOM_REPORT_TPC1FGE 18
+#define WACOM_REPORT_24HDT 1
/* device quirks */
#define WACOM_QUIRK_MULTI_INPUT 0x0001
WACOM_MO,
WIRELESS,
BAMBOO_PT,
+ WACOM_24HDT,
TABLETPC, /* add new TPC below */
TABLETPCE,
TABLETPC2FG,
int distance_fuzz;
unsigned quirks;
unsigned touch_max;
+ int oVid;
+ int oPid;
};
struct wacom_shared {
#endif
}
+/* SB IOAPIC is always on this device in AMD systems */
+#define IOAPIC_SB_DEVID ((0x00 << 8) | PCI_DEVFN(0x14, 0))
+
static bool __init check_ioapic_information(void)
{
+ bool ret, has_sb_ioapic;
int idx;
- for (idx = 0; idx < nr_ioapics; idx++) {
- int id = mpc_ioapic_id(idx);
+ has_sb_ioapic = false;
+ ret = false;
- if (get_ioapic_devid(id) < 0) {
- pr_err(FW_BUG "AMD-Vi: IO-APIC[%d] not in IVRS table\n", id);
- pr_err("AMD-Vi: Disabling interrupt remapping due to BIOS Bug\n");
- return false;
+ for (idx = 0; idx < nr_ioapics; idx++) {
+ int devid, id = mpc_ioapic_id(idx);
+
+ devid = get_ioapic_devid(id);
+ if (devid < 0) {
+ pr_err(FW_BUG "AMD-Vi: IOAPIC[%d] not in IVRS table\n", id);
+ ret = false;
+ } else if (devid == IOAPIC_SB_DEVID) {
+ has_sb_ioapic = true;
+ ret = true;
}
}
- return true;
+ if (!has_sb_ioapic) {
+ /*
+ * We expect the SB IOAPIC to be listed in the IVRS
+ * table. The system timer is connected to the SB IOAPIC
+ * and if we don't have it in the list the system will
+ * panic at boot time. This situation usually happens
+ * when the BIOS is buggy and provides us the wrong
+ * device id for the IOAPIC in the system.
+ */
+ pr_err(FW_BUG "AMD-Vi: No southbridge IOAPIC found in IVRS table\n");
+ }
+
+ if (!ret)
+ pr_err("AMD-Vi: Disabling interrupt remapping due to BIOS Bug(s)\n");
+
+ return ret;
}
static void __init free_dma_resources(void)
#define SMMU_ADDR_TO_PFN(addr) ((addr) >> 12)
#define SMMU_ADDR_TO_PDN(addr) ((addr) >> 22)
-#define SMMU_PDN_TO_ADDR(addr) ((pdn) << 22)
+#define SMMU_PDN_TO_ADDR(pdn) ((pdn) << 22)
#define _READABLE (1 << SMMU_PTB_DATA_ASID_READABLE_SHIFT)
#define _WRITABLE (1 << SMMU_PTB_DATA_ASID_WRITABLE_SHIFT)
if (rc == 0)
/* success, resubmit interrupt read URB */
rc = usb_submit_urb(urb, GFP_ATOMIC);
- if (rc != 0 && rc != -ENODEV) {
+
+ switch (rc) {
+ case 0: /* success */
+ case -ENODEV: /* device gone */
+ case -EINVAL: /* URB already resubmitted, or terminal badness */
+ break;
+ default: /* failure: try to recover by resetting the device */
dev_err(cs->dev, "clear halt failed: %s\n", get_usb_rcmsg(rc));
rc = usb_lock_device_for_reset(ucs->udev, ucs->interface);
if (rc == 0) {
}
/* gigaset_suspend
- * This function is called before the USB connection is suspended.
+ * This function is called before the USB connection is suspended
+ * or before the USB device is reset.
+ * In the latter case, message == PMSG_ON.
*/
static int gigaset_suspend(struct usb_interface *intf, pm_message_t message)
{
del_timer_sync(&ucs->timer_atrdy);
del_timer_sync(&ucs->timer_cmd_in);
del_timer_sync(&ucs->timer_int_in);
- cancel_work_sync(&ucs->int_in_wq);
+
+ /* don't try to cancel int_in_wq from within reset as it
+ * might be the one requesting the reset
+ */
+ if (message.event != PM_EVENT_ON)
+ cancel_work_sync(&ucs->int_in_wq);
gig_dbg(DEBUG_SUSPEND, "suspend complete");
return 0;
#define FLEXCAN_MB_CODE_MASK (0xf0ffffff)
-/* FLEXCAN hardware feature flags */
+/*
+ * FLEXCAN hardware feature flags
+ *
+ * Below is some version info we got:
+ * SOC Version IP-Version Glitch- [TR]WRN_INT
+ * Filter? connected?
+ * MX25 FlexCAN2 03.00.00.00 no no
+ * MX28 FlexCAN2 03.00.04.00 yes yes
+ * MX35 FlexCAN2 03.00.00.00 no no
+ * MX53 FlexCAN2 03.00.00.00 yes no
+ * MX6s FlexCAN3 10.00.12.00 yes yes
+ *
+ * Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected.
+ */
#define FLEXCAN_HAS_V10_FEATURES BIT(1) /* For core version >= 10 */
-#define FLEXCAN_HAS_BROKEN_ERR_STATE BIT(2) /* Broken error state handling */
+#define FLEXCAN_HAS_BROKEN_ERR_STATE BIT(2) /* [TR]WRN_INT not connected */
/* Structure of the message buffer */
struct flexcan_mb {
};
static struct flexcan_devtype_data fsl_imx28_devtype_data;
static struct flexcan_devtype_data fsl_imx6q_devtype_data = {
- .features = FLEXCAN_HAS_V10_FEATURES | FLEXCAN_HAS_BROKEN_ERR_STATE,
+ .features = FLEXCAN_HAS_V10_FEATURES,
};
static const struct can_bittiming_const flexcan_bittiming_const = {
#include "sja1000.h"
-MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
+MODULE_AUTHOR("Stephane Grosjean <s.grosjean@peak-system.com>");
MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCI family cards");
MODULE_SUPPORTED_DEVICE("PEAK PCAN PCI/PCIe/PCIeC miniPCI CAN cards");
+MODULE_SUPPORTED_DEVICE("PEAK PCAN miniPCIe/cPCI PC/104+ PCI/104e CAN Cards");
MODULE_LICENSE("GPL v2");
#define DRV_NAME "peak_pci"
#define PEAK_PCI_DEVICE_ID 0x0001 /* for PCI/PCIe slot cards */
#define PEAK_PCIEC_DEVICE_ID 0x0002 /* for ExpressCard slot cards */
#define PEAK_PCIE_DEVICE_ID 0x0003 /* for nextgen PCIe slot cards */
-#define PEAK_MPCI_DEVICE_ID 0x0008 /* The miniPCI slot cards */
+#define PEAK_CPCI_DEVICE_ID 0x0004 /* for nextgen cPCI slot cards */
+#define PEAK_MPCI_DEVICE_ID 0x0005 /* for nextgen miniPCI slot cards */
+#define PEAK_PC_104P_DEVICE_ID 0x0006 /* PCAN-PC/104+ cards */
+#define PEAK_PCI_104E_DEVICE_ID 0x0007 /* PCAN-PCI/104 Express cards */
+#define PEAK_MPCIE_DEVICE_ID 0x0008 /* The miniPCIe slot cards */
#define PEAK_PCI_CHAN_MAX 4
{PEAK_PCI_VENDOR_ID, PEAK_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
{PEAK_PCI_VENDOR_ID, PEAK_PCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
{PEAK_PCI_VENDOR_ID, PEAK_MPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+ {PEAK_PCI_VENDOR_ID, PEAK_MPCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+ {PEAK_PCI_VENDOR_ID, PEAK_PC_104P_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+ {PEAK_PCI_VENDOR_ID, PEAK_PCI_104E_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+ {PEAK_PCI_VENDOR_ID, PEAK_CPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
#ifdef CONFIG_CAN_PEAK_PCIEC
{PEAK_PCI_VENDOR_ID, PEAK_PCIEC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
#endif
unsigned char rev; /* chip revision */
unsigned char offload;
+ unsigned char bypass;
+
unsigned int ofldq_wr_cred;
};
#define for_each_port(adapter, iter) \
for (iter = 0; iter < (adapter)->params.nports; ++iter)
+static inline int is_bypass(struct adapter *adap)
+{
+ return adap->params.bypass;
+}
+
+static inline int is_bypass_device(int device)
+{
+ /* this should be set based upon device capabilities */
+ switch (device) {
+ case 0x440b:
+ case 0x440c:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
static inline unsigned int core_ticks_per_usec(const struct adapter *adap)
{
return adap->params.vpd.cclk / 1000;
if (ret < 0)
goto bye;
-#ifndef CONFIG_CHELSIO_T4_OFFLOAD
- /*
- * If we're a pure NIC driver then disable all offloading facilities.
- * This will allow the firmware to optimize aspects of the hardware
- * configuration which will result in improved performance.
- */
- caps_cmd.ofldcaps = 0;
- caps_cmd.iscsicaps = 0;
- caps_cmd.rdmacaps = 0;
- caps_cmd.fcoecaps = 0;
-#endif
-
if (caps_cmd.niccaps & htons(FW_CAPS_CONFIG_NIC_VM)) {
if (!vf_acls)
caps_cmd.niccaps ^= htons(FW_CAPS_CONFIG_NIC_VM);
u32 v, port_vec;
enum dev_state state;
u32 params[7], val[7];
+ struct fw_caps_config_cmd caps_cmd;
int reset = 1, j;
/*
goto bye;
}
+ if (is_bypass_device(adap->pdev->device))
+ adap->params.bypass = 1;
+
/*
* Grab some of our basic fundamental operating parameters.
*/
adap->tids.aftid_end = val[1];
}
-#ifdef CONFIG_CHELSIO_T4_OFFLOAD
/*
* Get device capabilities so we can determine what resources we need
* to manage.
*/
memset(&caps_cmd, 0, sizeof(caps_cmd));
- caps_cmd.op_to_write = htonl(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
+ caps_cmd.op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
FW_CMD_REQUEST | FW_CMD_READ);
caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd));
ret = t4_wr_mbox(adap, adap->mbox, &caps_cmd, sizeof(caps_cmd),
adap->vres.ddp.size = val[4] - val[3] + 1;
adap->params.ofldq_wr_cred = val[5];
- params[0] = FW_PARAM_PFVF(ETHOFLD_START);
- params[1] = FW_PARAM_PFVF(ETHOFLD_END);
- ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2,
- params, val);
- if ((val[0] != val[1]) && (ret >= 0)) {
- adap->tids.uotid_base = val[0];
- adap->tids.nuotids = val[1] - val[0] + 1;
- }
-
adap->params.offload = 1;
}
if (caps_cmd.rdmacaps) {
}
#undef FW_PARAM_PFVF
#undef FW_PARAM_DEV
-#endif /* CONFIG_CHELSIO_T4_OFFLOAD */
/*
* These are finalized by FW initialization, load their values now.
unsigned int ftid_base;
unsigned int aftid_base;
unsigned int aftid_end;
+ /* Server filter region */
+ unsigned int sftid_base;
+ unsigned int nsftids;
spinlock_t atid_lock ____cacheline_aligned_in_smp;
union aopen_entry *afree;
pr_err("no resource\n");
goto no_resource;
}
- if (request_resource(&ioport_resource, etsects->rsrc)) {
+ if (request_resource(&iomem_resource, etsects->rsrc)) {
pr_err("resource busy\n");
goto no_resource;
}
mlx4_bf_free(mdev->dev, &ring->bf);
mlx4_qp_remove(mdev->dev, &ring->qp);
mlx4_qp_free(mdev->dev, &ring->qp);
- mlx4_qp_release_range(mdev->dev, ring->qpn, 1);
mlx4_en_unmap_buffer(&ring->wqres.buf);
mlx4_free_hwq_res(mdev->dev, &ring->wqres, ring->buf_size);
kfree(ring->bounce_buf);
if (bounce)
tx_desc = mlx4_en_bounce_to_desc(priv, ring, index, desc_size);
- if (ring->bf_enabled && desc_size <= MAX_BF && !bounce && !vlan_tag) {
+ if (ring->bf_enabled && desc_size <= MAX_BF && !bounce && !vlan_tx_tag_present(skb)) {
*(__be32 *) (&tx_desc->ctrl.vlan_tag) |= cpu_to_be32(ring->doorbell_qpn);
op_own |= htonl((bf_index & 0xffff) << 8);
/* Ensure new descirptor hits memory
ctx = &priv->mfunc.master.slave_state[slave];
spin_lock_irqsave(&ctx->lock, flags);
- mlx4_dbg(dev, "%s: slave: %d, current state: %d new event :%d\n",
- __func__, slave, cur_state, event);
-
switch (cur_state) {
case SLAVE_PORT_DOWN:
if (MLX4_PORT_STATE_DEV_EVENT_PORT_UP == event)
goto out;
}
ret = mlx4_get_slave_port_state(dev, slave, port);
- mlx4_dbg(dev, "%s: slave: %d, current state: %d new event"
- " :%d gen_event: %d\n",
- __func__, slave, cur_state, event, *gen_event);
out:
spin_unlock_irqrestore(&ctx->lock, flags);
return priv->eq_table.uar_map[index] + 0x800 + 8 * (eq->eqn % 4);
}
+static void mlx4_unmap_uar(struct mlx4_dev *dev)
+{
+ struct mlx4_priv *priv = mlx4_priv(dev);
+ int i;
+
+ for (i = 0; i < mlx4_num_eq_uar(dev); ++i)
+ if (priv->eq_table.uar_map[i]) {
+ iounmap(priv->eq_table.uar_map[i]);
+ priv->eq_table.uar_map[i] = NULL;
+ }
+}
+
static int mlx4_create_eq(struct mlx4_dev *dev, int nent,
u8 intr, struct mlx4_eq *eq)
{
mlx4_free_irqs(dev);
err_out_bitmap:
+ mlx4_unmap_uar(dev);
mlx4_bitmap_cleanup(&priv->eq_table.bitmap);
err_out_free:
if (!mlx4_is_slave(dev))
mlx4_unmap_clr_int(dev);
- for (i = 0; i < mlx4_num_eq_uar(dev); ++i)
- if (priv->eq_table.uar_map[i])
- iounmap(priv->eq_table.uar_map[i]);
-
+ mlx4_unmap_uar(dev);
mlx4_bitmap_cleanup(&priv->eq_table.bitmap);
kfree(priv->eq_table.uar_map);
unmap_bf_area(dev);
err_close:
- mlx4_close_hca(dev);
+ if (mlx4_is_slave(dev))
+ mlx4_slave_exit(dev);
+ else
+ mlx4_CLOSE_HCA(dev, 0);
err_free_icm:
if (!mlx4_is_slave(dev))
new_index = priv->virt2phys_pkey[slave][port - 1][orig_index];
*(u8 *)(inbox->buf + 35) = new_index;
-
- mlx4_dbg(dev, "port = %d, orig pkey index = %d, "
- "new pkey index = %d\n", port, orig_index, new_index);
}
static void update_gid(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *inbox,
if (optpar & MLX4_QP_OPTPAR_ALT_ADDR_PATH)
qp_ctx->alt_path.mgid_index = slave & 0x7F;
}
-
- mlx4_dbg(dev, "slave %d, new gid index: 0x%x ",
- slave, qp_ctx->pri_path.mgid_index);
}
static int mpt_mask(struct mlx4_dev *dev)
pr_err("Error: busy bit is not cleared\n");
}
-/**
- * pch_gbe_wait_clr_bit_irq - Wait to clear a bit for interrupt context
- * @reg: Pointer of register
- * @busy: Busy bit
- */
-static int pch_gbe_wait_clr_bit_irq(void *reg, u32 bit)
-{
- u32 tmp;
- int ret = -1;
- /* wait busy */
- tmp = 20;
- while ((ioread32(reg) & bit) && --tmp)
- udelay(5);
- if (!tmp)
- pr_err("Error: busy bit is not cleared\n");
- else
- ret = 0;
- return ret;
-}
-
/**
* pch_gbe_mac_mar_set - Set MAC address register
* @hw: Pointer to the HW structure
return;
}
-static void pch_gbe_mac_reset_rx(struct pch_gbe_hw *hw)
+static void pch_gbe_disable_mac_rx(struct pch_gbe_hw *hw)
{
- /* Read the MAC addresses. and store to the private data */
- pch_gbe_mac_read_mac_addr(hw);
- iowrite32(PCH_GBE_RX_RST, &hw->reg->RESET);
- pch_gbe_wait_clr_bit_irq(&hw->reg->RESET, PCH_GBE_RX_RST);
- /* Setup the MAC addresses */
- pch_gbe_mac_mar_set(hw, hw->mac.addr, 0);
- return;
+ u32 rctl;
+ /* Disables Receive MAC */
+ rctl = ioread32(&hw->reg->MAC_RX_EN);
+ iowrite32((rctl & ~PCH_GBE_MRE_MAC_RX_EN), &hw->reg->MAC_RX_EN);
+}
+
+static void pch_gbe_enable_mac_rx(struct pch_gbe_hw *hw)
+{
+ u32 rctl;
+ /* Enables Receive MAC */
+ rctl = ioread32(&hw->reg->MAC_RX_EN);
+ iowrite32((rctl | PCH_GBE_MRE_MAC_RX_EN), &hw->reg->MAC_RX_EN);
}
/**
static void pch_gbe_configure_rx(struct pch_gbe_adapter *adapter)
{
struct pch_gbe_hw *hw = &adapter->hw;
- u32 rdba, rdlen, rctl, rxdma;
+ u32 rdba, rdlen, rxdma;
pr_debug("dma adr = 0x%08llx size = 0x%08x\n",
(unsigned long long)adapter->rx_ring->dma,
pch_gbe_mac_force_mac_fc(hw);
- /* Disables Receive MAC */
- rctl = ioread32(&hw->reg->MAC_RX_EN);
- iowrite32((rctl & ~PCH_GBE_MRE_MAC_RX_EN), &hw->reg->MAC_RX_EN);
+ pch_gbe_disable_mac_rx(hw);
/* Disables Receive DMA */
rxdma = ioread32(&hw->reg->DMA_CTRL);
spin_unlock_irqrestore(&adapter->stats_lock, flags);
}
-static void pch_gbe_stop_receive(struct pch_gbe_adapter *adapter)
+static void pch_gbe_disable_dma_rx(struct pch_gbe_hw *hw)
{
- struct pch_gbe_hw *hw = &adapter->hw;
u32 rxdma;
- u16 value;
- int ret;
/* Disable Receive DMA */
rxdma = ioread32(&hw->reg->DMA_CTRL);
rxdma &= ~PCH_GBE_RX_DMA_EN;
iowrite32(rxdma, &hw->reg->DMA_CTRL);
- /* Wait Rx DMA BUS is IDLE */
- ret = pch_gbe_wait_clr_bit_irq(&hw->reg->RX_DMA_ST, PCH_GBE_IDLE_CHECK);
- if (ret) {
- /* Disable Bus master */
- pci_read_config_word(adapter->pdev, PCI_COMMAND, &value);
- value &= ~PCI_COMMAND_MASTER;
- pci_write_config_word(adapter->pdev, PCI_COMMAND, value);
- /* Stop Receive */
- pch_gbe_mac_reset_rx(hw);
- /* Enable Bus master */
- value |= PCI_COMMAND_MASTER;
- pci_write_config_word(adapter->pdev, PCI_COMMAND, value);
- } else {
- /* Stop Receive */
- pch_gbe_mac_reset_rx(hw);
- }
- /* reprogram multicast address register after reset */
- pch_gbe_set_multi(adapter->netdev);
}
-static void pch_gbe_start_receive(struct pch_gbe_hw *hw)
+static void pch_gbe_enable_dma_rx(struct pch_gbe_hw *hw)
{
u32 rxdma;
rxdma = ioread32(&hw->reg->DMA_CTRL);
rxdma |= PCH_GBE_RX_DMA_EN;
iowrite32(rxdma, &hw->reg->DMA_CTRL);
- /* Enables Receive */
- iowrite32(PCH_GBE_MRE_MAC_RX_EN, &hw->reg->MAC_RX_EN);
- return;
}
/**
int_en = ioread32(&hw->reg->INT_EN);
iowrite32((int_en & ~PCH_GBE_INT_RX_FIFO_ERR),
&hw->reg->INT_EN);
- pch_gbe_stop_receive(adapter);
+ pch_gbe_disable_dma_rx(&adapter->hw);
int_st |= ioread32(&hw->reg->INT_ST);
int_st = int_st & ioread32(&hw->reg->INT_EN);
}
struct net_device *netdev = adapter->netdev;
struct pch_gbe_tx_ring *tx_ring = adapter->tx_ring;
struct pch_gbe_rx_ring *rx_ring = adapter->rx_ring;
- int err;
+ int err = -EINVAL;
/* Ensure we have a valid MAC */
if (!is_valid_ether_addr(adapter->hw.mac.addr)) {
pr_err("Error: Invalid MAC address\n");
- return -EINVAL;
+ goto out;
}
/* hardware has been reset, we need to reload some things */
err = pch_gbe_request_irq(adapter);
if (err) {
- pr_err("Error: can't bring device up\n");
- return err;
+ pr_err("Error: can't bring device up - irq request failed\n");
+ goto out;
}
err = pch_gbe_alloc_rx_buffers_pool(adapter, rx_ring, rx_ring->count);
if (err) {
- pr_err("Error: can't bring device up\n");
- return err;
+ pr_err("Error: can't bring device up - alloc rx buffers pool failed\n");
+ goto freeirq;
}
pch_gbe_alloc_tx_buffers(adapter, tx_ring);
pch_gbe_alloc_rx_buffers(adapter, rx_ring, rx_ring->count);
adapter->tx_queue_len = netdev->tx_queue_len;
- pch_gbe_start_receive(&adapter->hw);
+ pch_gbe_enable_dma_rx(&adapter->hw);
+ pch_gbe_enable_mac_rx(&adapter->hw);
mod_timer(&adapter->watchdog_timer, jiffies);
netif_start_queue(adapter->netdev);
return 0;
+
+freeirq:
+ pch_gbe_free_irq(adapter);
+out:
+ return err;
}
/**
int work_done = 0;
bool poll_end_flag = false;
bool cleaned = false;
- u32 int_en;
pr_debug("budget : %d\n", budget);
if (poll_end_flag) {
napi_complete(napi);
- if (adapter->rx_stop_flag) {
- adapter->rx_stop_flag = false;
- pch_gbe_start_receive(&adapter->hw);
- }
pch_gbe_irq_enable(adapter);
- } else
- if (adapter->rx_stop_flag) {
- adapter->rx_stop_flag = false;
- pch_gbe_start_receive(&adapter->hw);
- int_en = ioread32(&adapter->hw.reg->INT_EN);
- iowrite32((int_en | PCH_GBE_INT_RX_FIFO_ERR),
- &adapter->hw.reg->INT_EN);
- }
+ }
+
+ if (adapter->rx_stop_flag) {
+ adapter->rx_stop_flag = false;
+ pch_gbe_enable_dma_rx(&adapter->hw);
+ }
pr_debug("poll_end_flag : %d work_done : %d budget : %d\n",
poll_end_flag, work_done, budget);
qdev->req_q_size =
(u32) (NUM_REQ_Q_ENTRIES * sizeof(struct ob_mac_iocb_req));
+ qdev->rsp_q_size = NUM_RSP_Q_ENTRIES * sizeof(struct net_rsp_iocb);
+
+ /* The barrier is required to ensure request and response queue
+ * addr writes to the registers.
+ */
+ wmb();
+
qdev->req_q_virt_addr =
pci_alloc_consistent(qdev->pdev,
(size_t) qdev->req_q_size,
return -ENOMEM;
}
- qdev->rsp_q_size = NUM_RSP_Q_ENTRIES * sizeof(struct net_rsp_iocb);
-
qdev->rsp_q_virt_addr =
pci_alloc_consistent(qdev->pdev,
(size_t) qdev->rsp_q_size,
config NET_VENDOR_TI
bool "Texas Instruments (TI) devices"
default y
- depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3))
+ depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX))
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
{
struct skb_shared_info *sh = skb_shinfo(skb);
unsigned int sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
- unsigned int data_len = skb->data_len + skb->hdr_len - sh_len;
+ unsigned int data_len = skb->len - sh_len;
unsigned int p_len = sh->gso_size;
long f_id = -1; /* id of the current fragment */
- long f_size = skb->hdr_len; /* size of the current fragment */
- long f_used = sh_len; /* bytes used from the current fragment */
+ long f_size = skb_headlen(skb) - sh_len; /* current fragment size */
+ long f_used = 0; /* bytes used from the current fragment */
long n; /* size of the current piece of payload */
int num_edescs = 0;
int segment;
/* Advance as needed. */
while (f_used >= f_size) {
f_id++;
- f_size = sh->frags[f_id].size;
+ f_size = skb_frag_size(&sh->frags[f_id]);
f_used = 0;
}
struct iphdr *ih;
struct tcphdr *th;
unsigned int sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
- unsigned int data_len = skb->data_len + skb->hdr_len - sh_len;
+ unsigned int data_len = skb->len - sh_len;
unsigned char *data = skb->data;
unsigned int ih_off, th_off, p_len;
unsigned int isum_seed, tsum_seed, id, seq;
long f_id = -1; /* id of the current fragment */
- long f_size = skb->hdr_len; /* size of the current fragment */
- long f_used = sh_len; /* bytes used from the current fragment */
+ long f_size = skb_headlen(skb) - sh_len; /* current fragment size */
+ long f_used = 0; /* bytes used from the current fragment */
long n; /* size of the current piece of payload */
int segment;
isum_seed = ((0xFFFF - ih->check) +
(0xFFFF - ih->tot_len) +
(0xFFFF - ih->id));
- tsum_seed = th->check + (0xFFFF ^ htons(sh_len + data_len));
+ tsum_seed = th->check + (0xFFFF ^ htons(skb->len));
id = ntohs(ih->id);
seq = ntohl(th->seq);
/* Advance as needed. */
while (f_used >= f_size) {
f_id++;
- f_size = sh->frags[f_id].size;
+ f_size = skb_frag_size(&sh->frags[f_id]);
f_used = 0;
}
struct tile_net_priv *priv = netdev_priv(dev);
struct skb_shared_info *sh = skb_shinfo(skb);
unsigned int sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
- unsigned int data_len = skb->data_len + skb->hdr_len - sh_len;
+ unsigned int data_len = skb->len - sh_len;
unsigned int p_len = sh->gso_size;
gxio_mpipe_edesc_t edesc_head = { { 0 } };
gxio_mpipe_edesc_t edesc_body = { { 0 } };
long f_id = -1; /* id of the current fragment */
- long f_size = skb->hdr_len; /* size of the current fragment */
- long f_used = sh_len; /* bytes used from the current fragment */
- void *f_data = skb->data;
+ long f_size = skb_headlen(skb) - sh_len; /* current fragment size */
+ long f_used = 0; /* bytes used from the current fragment */
+ void *f_data = skb->data + sh_len;
long n; /* size of the current piece of payload */
unsigned long tx_packets = 0, tx_bytes = 0;
unsigned int csum_start;
/* Egress the payload. */
while (p_used < p_len) {
+ void *va;
/* Advance as needed. */
while (f_used >= f_size) {
f_id++;
- f_size = sh->frags[f_id].size;
- f_used = 0;
+ f_size = skb_frag_size(&sh->frags[f_id]);
f_data = tile_net_frag_buf(&sh->frags[f_id]);
+ f_used = 0;
}
+ va = f_data + f_used;
+
/* Use bytes from the current fragment. */
n = p_len - p_used;
if (n > f_size - f_used)
p_used += n;
/* Egress a piece of the payload. */
- edesc_body.va = va_to_tile_io_addr(f_data) + f_used;
+ edesc_body.va = va_to_tile_io_addr(va);
edesc_body.xfer_size = n;
edesc_body.bound = !(p_used < p_len);
gxio_mpipe_equeue_put_at(equeue, edesc_body, slot);
comment "MII PHY device drivers"
+config AT803X_PHY
+ tristate "Drivers for Atheros AT803X PHYs"
+ ---help---
+ Currently supports the AT8030 and AT8035 model
+
config AMD_PHY
tristate "Drivers for the AMD PHYs"
---help---
obj-$(CONFIG_MICREL_PHY) += micrel.o
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
+obj-$(CONFIG_AT803X_PHY) += at803x.o
obj-$(CONFIG_AMD_PHY) += amd.o
obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o
obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o
--- /dev/null
+/*
+ * drivers/net/phy/at803x.c
+ *
+ * Driver for Atheros 803x PHY
+ *
+ * Author: Matus Ujhelyi <ujhelyi.m@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/phy.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+
+#define AT803X_INTR_ENABLE 0x12
+#define AT803X_INTR_STATUS 0x13
+#define AT803X_WOL_ENABLE 0x01
+#define AT803X_DEVICE_ADDR 0x03
+#define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C
+#define AT803X_LOC_MAC_ADDR_16_31_OFFSET 0x804B
+#define AT803X_LOC_MAC_ADDR_32_47_OFFSET 0x804A
+#define AT803X_MMD_ACCESS_CONTROL 0x0D
+#define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E
+#define AT803X_FUNC_DATA 0x4003
+
+MODULE_DESCRIPTION("Atheros 803x PHY driver");
+MODULE_AUTHOR("Matus Ujhelyi");
+MODULE_LICENSE("GPL");
+
+static void at803x_set_wol_mac_addr(struct phy_device *phydev)
+{
+ struct net_device *ndev = phydev->attached_dev;
+ const u8 *mac;
+ unsigned int i, offsets[] = {
+ AT803X_LOC_MAC_ADDR_32_47_OFFSET,
+ AT803X_LOC_MAC_ADDR_16_31_OFFSET,
+ AT803X_LOC_MAC_ADDR_0_15_OFFSET,
+ };
+
+ if (!ndev)
+ return;
+
+ mac = (const u8 *) ndev->dev_addr;
+
+ if (!is_valid_ether_addr(mac))
+ return;
+
+ for (i = 0; i < 3; i++) {
+ phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
+ AT803X_DEVICE_ADDR);
+ phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
+ offsets[i]);
+ phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
+ AT803X_FUNC_DATA);
+ phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
+ mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
+ }
+}
+
+static int at803x_config_init(struct phy_device *phydev)
+{
+ int val;
+ u32 features;
+ int status;
+
+ features = SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_AUI |
+ SUPPORTED_FIBRE | SUPPORTED_BNC;
+
+ val = phy_read(phydev, MII_BMSR);
+ if (val < 0)
+ return val;
+
+ if (val & BMSR_ANEGCAPABLE)
+ features |= SUPPORTED_Autoneg;
+ if (val & BMSR_100FULL)
+ features |= SUPPORTED_100baseT_Full;
+ if (val & BMSR_100HALF)
+ features |= SUPPORTED_100baseT_Half;
+ if (val & BMSR_10FULL)
+ features |= SUPPORTED_10baseT_Full;
+ if (val & BMSR_10HALF)
+ features |= SUPPORTED_10baseT_Half;
+
+ if (val & BMSR_ESTATEN) {
+ val = phy_read(phydev, MII_ESTATUS);
+ if (val < 0)
+ return val;
+
+ if (val & ESTATUS_1000_TFULL)
+ features |= SUPPORTED_1000baseT_Full;
+ if (val & ESTATUS_1000_THALF)
+ features |= SUPPORTED_1000baseT_Half;
+ }
+
+ phydev->supported = features;
+ phydev->advertising = features;
+
+ /* enable WOL */
+ at803x_set_wol_mac_addr(phydev);
+ status = phy_write(phydev, AT803X_INTR_ENABLE, AT803X_WOL_ENABLE);
+ status = phy_read(phydev, AT803X_INTR_STATUS);
+
+ return 0;
+}
+
+/* ATHEROS 8035 */
+static struct phy_driver at8035_driver = {
+ .phy_id = 0x004dd072,
+ .name = "Atheros 8035 ethernet",
+ .phy_id_mask = 0xffffffef,
+ .config_init = at803x_config_init,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .driver = {
+ .owner = THIS_MODULE,
+ },
+};
+
+/* ATHEROS 8030 */
+static struct phy_driver at8030_driver = {
+ .phy_id = 0x004dd076,
+ .name = "Atheros 8030 ethernet",
+ .phy_id_mask = 0xffffffef,
+ .config_init = at803x_config_init,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .driver = {
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init atheros_init(void)
+{
+ int ret;
+
+ ret = phy_driver_register(&at8035_driver);
+ if (ret)
+ goto err1;
+
+ ret = phy_driver_register(&at8030_driver);
+ if (ret)
+ goto err2;
+
+ return 0;
+
+err2:
+ phy_driver_unregister(&at8035_driver);
+err1:
+ return ret;
+}
+
+static void __exit atheros_exit(void)
+{
+ phy_driver_unregister(&at8035_driver);
+ phy_driver_unregister(&at8030_driver);
+}
+
+module_init(atheros_init);
+module_exit(atheros_exit);
+
+static struct mdio_device_id __maybe_unused atheros_tbl[] = {
+ { 0x004dd076, 0xffffffef },
+ { 0x004dd072, 0xffffffef },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, atheros_tbl);
.driver_info = 0,
},
+/* Novatel USB551L and MC551 - handled by qmi_wwan */
+{
+ .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+ | USB_DEVICE_ID_MATCH_PRODUCT
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = NOVATEL_VENDOR_ID,
+ .idProduct = 0xB001,
+ .bInterfaceClass = USB_CLASS_COMM,
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET,
+ .bInterfaceProtocol = USB_CDC_PROTO_NONE,
+ .driver_info = 0,
+},
+
+/* Novatel E362 - handled by qmi_wwan */
+{
+ .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+ | USB_DEVICE_ID_MATCH_PRODUCT
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = NOVATEL_VENDOR_ID,
+ .idProduct = 0x9010,
+ .bInterfaceClass = USB_CLASS_COMM,
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET,
+ .bInterfaceProtocol = USB_CDC_PROTO_NONE,
+ .driver_info = 0,
+},
+
/*
* WHITELIST!!!
*
* because of bugs/quirks in a given product (like Zaurus, above).
*/
{
- /* Novatel USB551L */
- /* This match must come *before* the generic CDC-ETHER match so that
- * we get FLAG_WWAN set on the device, since it's descriptors are
- * generic CDC-ETHER.
- */
- .match_flags = USB_DEVICE_ID_MATCH_VENDOR
- | USB_DEVICE_ID_MATCH_PRODUCT
- | USB_DEVICE_ID_MATCH_INT_INFO,
- .idVendor = NOVATEL_VENDOR_ID,
- .idProduct = 0xB001,
- .bInterfaceClass = USB_CLASS_COMM,
- .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET,
- .bInterfaceProtocol = USB_CDC_PROTO_NONE,
- .driver_info = (unsigned long)&wwan_info,
-}, {
/* ZTE (Vodafone) K3805-Z */
.match_flags = USB_DEVICE_ID_MATCH_VENDOR
| USB_DEVICE_ID_MATCH_PRODUCT
#define USB_PRODUCT_IPAD 0x129a
#define USB_PRODUCT_IPHONE_4_VZW 0x129c
#define USB_PRODUCT_IPHONE_4S 0x12a0
+#define USB_PRODUCT_IPHONE_5 0x12a8
#define IPHETH_USBINTF_CLASS 255
#define IPHETH_USBINTF_SUBCLASS 253
USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4S,
IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
IPHETH_USBINTF_PROTO) },
+ { USB_DEVICE_AND_INTERFACE_INFO(
+ USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_5,
+ IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+ IPHETH_USBINTF_PROTO) },
{ }
};
MODULE_DEVICE_TABLE(usb, ipheth_table);
USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf1, 0xff),
.driver_info = (unsigned long)&qmi_wwan_info,
},
+ { /* Novatel USB551L and MC551 */
+ USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0xb001,
+ USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET,
+ USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long)&qmi_wwan_info,
+ },
+ { /* Novatel E362 */
+ USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0x9010,
+ USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET,
+ USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long)&qmi_wwan_info,
+ },
/* 3. Combined interface devices matching on interface number */
+ {QMI_FIXED_INTF(0x19d2, 0x0002, 1)},
+ {QMI_FIXED_INTF(0x19d2, 0x0012, 1)},
+ {QMI_FIXED_INTF(0x19d2, 0x0017, 3)},
+ {QMI_FIXED_INTF(0x19d2, 0x0021, 4)},
+ {QMI_FIXED_INTF(0x19d2, 0x0025, 1)},
+ {QMI_FIXED_INTF(0x19d2, 0x0031, 4)},
+ {QMI_FIXED_INTF(0x19d2, 0x0042, 4)},
+ {QMI_FIXED_INTF(0x19d2, 0x0049, 5)},
+ {QMI_FIXED_INTF(0x19d2, 0x0052, 4)},
{QMI_FIXED_INTF(0x19d2, 0x0055, 1)}, /* ZTE (Vodafone) K3520-Z */
+ {QMI_FIXED_INTF(0x19d2, 0x0058, 4)},
{QMI_FIXED_INTF(0x19d2, 0x0063, 4)}, /* ZTE (Vodafone) K3565-Z */
{QMI_FIXED_INTF(0x19d2, 0x0104, 4)}, /* ZTE (Vodafone) K4505-Z */
+ {QMI_FIXED_INTF(0x19d2, 0x0113, 5)},
+ {QMI_FIXED_INTF(0x19d2, 0x0118, 5)},
+ {QMI_FIXED_INTF(0x19d2, 0x0121, 5)},
+ {QMI_FIXED_INTF(0x19d2, 0x0123, 4)},
+ {QMI_FIXED_INTF(0x19d2, 0x0124, 5)},
+ {QMI_FIXED_INTF(0x19d2, 0x0125, 6)},
+ {QMI_FIXED_INTF(0x19d2, 0x0126, 5)},
+ {QMI_FIXED_INTF(0x19d2, 0x0130, 1)},
+ {QMI_FIXED_INTF(0x19d2, 0x0133, 3)},
+ {QMI_FIXED_INTF(0x19d2, 0x0141, 5)},
{QMI_FIXED_INTF(0x19d2, 0x0157, 5)}, /* ZTE MF683 */
+ {QMI_FIXED_INTF(0x19d2, 0x0158, 3)},
{QMI_FIXED_INTF(0x19d2, 0x0167, 4)}, /* ZTE MF820D */
+ {QMI_FIXED_INTF(0x19d2, 0x0168, 4)},
+ {QMI_FIXED_INTF(0x19d2, 0x0176, 3)},
+ {QMI_FIXED_INTF(0x19d2, 0x0178, 3)},
+ {QMI_FIXED_INTF(0x19d2, 0x0191, 4)}, /* ZTE EuFi890 */
+ {QMI_FIXED_INTF(0x19d2, 0x0199, 1)}, /* ZTE MF820S */
+ {QMI_FIXED_INTF(0x19d2, 0x0200, 1)},
+ {QMI_FIXED_INTF(0x19d2, 0x0257, 3)}, /* ZTE MF821 */
{QMI_FIXED_INTF(0x19d2, 0x0326, 4)}, /* ZTE MF821D */
{QMI_FIXED_INTF(0x19d2, 0x1008, 4)}, /* ZTE (Vodafone) K3570-Z */
{QMI_FIXED_INTF(0x19d2, 0x1010, 4)}, /* ZTE (Vodafone) K3571-Z */
+ {QMI_FIXED_INTF(0x19d2, 0x1012, 4)},
{QMI_FIXED_INTF(0x19d2, 0x1018, 3)}, /* ZTE (Vodafone) K5006-Z */
+ {QMI_FIXED_INTF(0x19d2, 0x1021, 2)},
+ {QMI_FIXED_INTF(0x19d2, 0x1245, 4)},
+ {QMI_FIXED_INTF(0x19d2, 0x1247, 4)},
+ {QMI_FIXED_INTF(0x19d2, 0x1252, 4)},
+ {QMI_FIXED_INTF(0x19d2, 0x1254, 4)},
+ {QMI_FIXED_INTF(0x19d2, 0x1255, 3)},
+ {QMI_FIXED_INTF(0x19d2, 0x1255, 4)},
+ {QMI_FIXED_INTF(0x19d2, 0x1256, 4)},
+ {QMI_FIXED_INTF(0x19d2, 0x1401, 2)},
{QMI_FIXED_INTF(0x19d2, 0x1402, 2)}, /* ZTE MF60 */
+ {QMI_FIXED_INTF(0x19d2, 0x1424, 2)},
+ {QMI_FIXED_INTF(0x19d2, 0x1425, 2)},
+ {QMI_FIXED_INTF(0x19d2, 0x1426, 2)}, /* ZTE MF91 */
{QMI_FIXED_INTF(0x19d2, 0x2002, 4)}, /* ZTE (Vodafone) K3765-Z */
{QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)}, /* Sierra Wireless MC7700 */
{QMI_FIXED_INTF(0x114f, 0x68a2, 8)}, /* Sierra Wireless MC7750 */
usb_anchor_urb(urb, &dev->deferred);
/* no use to process more packets */
netif_stop_queue(net);
+ usb_put_urb(urb);
spin_unlock_irqrestore(&dev->txq.lock, flags);
netdev_dbg(dev->net, "Delaying transmission for resumption\n");
goto deferred;
cancel_work_sync(&dev->kevent);
+ usb_scuttle_anchored_urbs(&dev->deferred);
+
if (dev->driver_info->unbind)
dev->driver_info->unbind (dev, intf);
static const u32 ar9300Modes_high_power_tx_gain_table_2p2[][5] = {
/* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */
- {0x0000a2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352},
- {0x0000a2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584},
- {0x0000a2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800},
+ {0x0000a2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352},
+ {0x0000a2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584},
+ {0x0000a2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800},
{0x0000a2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
{0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9},
{0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
{0x0000a504, 0x06000003, 0x06000003, 0x04000002, 0x04000002},
{0x0000a508, 0x0a000020, 0x0a000020, 0x08000004, 0x08000004},
{0x0000a50c, 0x10000023, 0x10000023, 0x0b000200, 0x0b000200},
- {0x0000a510, 0x15000028, 0x15000028, 0x0f000202, 0x0f000202},
- {0x0000a514, 0x1b00002b, 0x1b00002b, 0x12000400, 0x12000400},
- {0x0000a518, 0x1f020028, 0x1f020028, 0x16000402, 0x16000402},
- {0x0000a51c, 0x2502002b, 0x2502002b, 0x19000404, 0x19000404},
- {0x0000a520, 0x2a04002a, 0x2a04002a, 0x1c000603, 0x1c000603},
- {0x0000a524, 0x2e06002a, 0x2e06002a, 0x21000a02, 0x21000a02},
- {0x0000a528, 0x3302202d, 0x3302202d, 0x25000a04, 0x25000a04},
- {0x0000a52c, 0x3804202c, 0x3804202c, 0x28000a20, 0x28000a20},
- {0x0000a530, 0x3c06202c, 0x3c06202c, 0x2c000e20, 0x2c000e20},
- {0x0000a534, 0x4108202d, 0x4108202d, 0x30000e22, 0x30000e22},
- {0x0000a538, 0x4506402d, 0x4506402d, 0x34000e24, 0x34000e24},
- {0x0000a53c, 0x4906222d, 0x4906222d, 0x38001640, 0x38001640},
- {0x0000a540, 0x4d062231, 0x4d062231, 0x3c001660, 0x3c001660},
- {0x0000a544, 0x50082231, 0x50082231, 0x3f001861, 0x3f001861},
- {0x0000a548, 0x5608422e, 0x5608422e, 0x43001a81, 0x43001a81},
- {0x0000a54c, 0x5a08442e, 0x5a08442e, 0x47001a83, 0x47001a83},
- {0x0000a550, 0x5e0a4431, 0x5e0a4431, 0x4a001c84, 0x4a001c84},
- {0x0000a554, 0x640a4432, 0x640a4432, 0x4e001ce3, 0x4e001ce3},
- {0x0000a558, 0x680a4434, 0x680a4434, 0x52001ce5, 0x52001ce5},
- {0x0000a55c, 0x6c0a6434, 0x6c0a6434, 0x56001ce9, 0x56001ce9},
- {0x0000a560, 0x6f0a6633, 0x6f0a6633, 0x5a001ceb, 0x5a001ceb},
- {0x0000a564, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec},
- {0x0000a568, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec},
- {0x0000a56c, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec},
- {0x0000a570, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec},
- {0x0000a574, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec},
- {0x0000a578, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec},
- {0x0000a57c, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec},
+ {0x0000a510, 0x16000220, 0x16000220, 0x0f000202, 0x0f000202},
+ {0x0000a514, 0x1c000223, 0x1c000223, 0x12000400, 0x12000400},
+ {0x0000a518, 0x21002220, 0x21002220, 0x16000402, 0x16000402},
+ {0x0000a51c, 0x27002223, 0x27002223, 0x19000404, 0x19000404},
+ {0x0000a520, 0x2b022220, 0x2b022220, 0x1c000603, 0x1c000603},
+ {0x0000a524, 0x2f022222, 0x2f022222, 0x21000a02, 0x21000a02},
+ {0x0000a528, 0x34022225, 0x34022225, 0x25000a04, 0x25000a04},
+ {0x0000a52c, 0x3a02222a, 0x3a02222a, 0x28000a20, 0x28000a20},
+ {0x0000a530, 0x3e02222c, 0x3e02222c, 0x2c000e20, 0x2c000e20},
+ {0x0000a534, 0x4202242a, 0x4202242a, 0x30000e22, 0x30000e22},
+ {0x0000a538, 0x4702244a, 0x4702244a, 0x34000e24, 0x34000e24},
+ {0x0000a53c, 0x4b02244c, 0x4b02244c, 0x38001640, 0x38001640},
+ {0x0000a540, 0x4e02246c, 0x4e02246c, 0x3c001660, 0x3c001660},
+ {0x0000a544, 0x52022470, 0x52022470, 0x3f001861, 0x3f001861},
+ {0x0000a548, 0x55022490, 0x55022490, 0x43001a81, 0x43001a81},
+ {0x0000a54c, 0x59022492, 0x59022492, 0x47001a83, 0x47001a83},
+ {0x0000a550, 0x5d022692, 0x5d022692, 0x4a001c84, 0x4a001c84},
+ {0x0000a554, 0x61022892, 0x61022892, 0x4e001ce3, 0x4e001ce3},
+ {0x0000a558, 0x65024890, 0x65024890, 0x52001ce5, 0x52001ce5},
+ {0x0000a55c, 0x69024892, 0x69024892, 0x56001ce9, 0x56001ce9},
+ {0x0000a560, 0x6e024c92, 0x6e024c92, 0x5a001ceb, 0x5a001ceb},
+ {0x0000a564, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+ {0x0000a568, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+ {0x0000a56c, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+ {0x0000a570, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+ {0x0000a574, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+ {0x0000a578, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+ {0x0000a57c, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
{0x0000a580, 0x00800000, 0x00800000, 0x00800000, 0x00800000},
{0x0000a584, 0x06800003, 0x06800003, 0x04800002, 0x04800002},
{0x0000a588, 0x0a800020, 0x0a800020, 0x08800004, 0x08800004},
{0x0000a58c, 0x10800023, 0x10800023, 0x0b800200, 0x0b800200},
- {0x0000a590, 0x15800028, 0x15800028, 0x0f800202, 0x0f800202},
- {0x0000a594, 0x1b80002b, 0x1b80002b, 0x12800400, 0x12800400},
- {0x0000a598, 0x1f820028, 0x1f820028, 0x16800402, 0x16800402},
- {0x0000a59c, 0x2582002b, 0x2582002b, 0x19800404, 0x19800404},
- {0x0000a5a0, 0x2a84002a, 0x2a84002a, 0x1c800603, 0x1c800603},
- {0x0000a5a4, 0x2e86002a, 0x2e86002a, 0x21800a02, 0x21800a02},
- {0x0000a5a8, 0x3382202d, 0x3382202d, 0x25800a04, 0x25800a04},
- {0x0000a5ac, 0x3884202c, 0x3884202c, 0x28800a20, 0x28800a20},
- {0x0000a5b0, 0x3c86202c, 0x3c86202c, 0x2c800e20, 0x2c800e20},
- {0x0000a5b4, 0x4188202d, 0x4188202d, 0x30800e22, 0x30800e22},
- {0x0000a5b8, 0x4586402d, 0x4586402d, 0x34800e24, 0x34800e24},
- {0x0000a5bc, 0x4986222d, 0x4986222d, 0x38801640, 0x38801640},
- {0x0000a5c0, 0x4d862231, 0x4d862231, 0x3c801660, 0x3c801660},
- {0x0000a5c4, 0x50882231, 0x50882231, 0x3f801861, 0x3f801861},
- {0x0000a5c8, 0x5688422e, 0x5688422e, 0x43801a81, 0x43801a81},
- {0x0000a5cc, 0x5a88442e, 0x5a88442e, 0x47801a83, 0x47801a83},
- {0x0000a5d0, 0x5e8a4431, 0x5e8a4431, 0x4a801c84, 0x4a801c84},
- {0x0000a5d4, 0x648a4432, 0x648a4432, 0x4e801ce3, 0x4e801ce3},
- {0x0000a5d8, 0x688a4434, 0x688a4434, 0x52801ce5, 0x52801ce5},
- {0x0000a5dc, 0x6c8a6434, 0x6c8a6434, 0x56801ce9, 0x56801ce9},
- {0x0000a5e0, 0x6f8a6633, 0x6f8a6633, 0x5a801ceb, 0x5a801ceb},
- {0x0000a5e4, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec},
- {0x0000a5e8, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec},
- {0x0000a5ec, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec},
- {0x0000a5f0, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec},
- {0x0000a5f4, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec},
- {0x0000a5f8, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec},
- {0x0000a5fc, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec},
+ {0x0000a590, 0x16800220, 0x16800220, 0x0f800202, 0x0f800202},
+ {0x0000a594, 0x1c800223, 0x1c800223, 0x12800400, 0x12800400},
+ {0x0000a598, 0x21802220, 0x21802220, 0x16800402, 0x16800402},
+ {0x0000a59c, 0x27802223, 0x27802223, 0x19800404, 0x19800404},
+ {0x0000a5a0, 0x2b822220, 0x2b822220, 0x1c800603, 0x1c800603},
+ {0x0000a5a4, 0x2f822222, 0x2f822222, 0x21800a02, 0x21800a02},
+ {0x0000a5a8, 0x34822225, 0x34822225, 0x25800a04, 0x25800a04},
+ {0x0000a5ac, 0x3a82222a, 0x3a82222a, 0x28800a20, 0x28800a20},
+ {0x0000a5b0, 0x3e82222c, 0x3e82222c, 0x2c800e20, 0x2c800e20},
+ {0x0000a5b4, 0x4282242a, 0x4282242a, 0x30800e22, 0x30800e22},
+ {0x0000a5b8, 0x4782244a, 0x4782244a, 0x34800e24, 0x34800e24},
+ {0x0000a5bc, 0x4b82244c, 0x4b82244c, 0x38801640, 0x38801640},
+ {0x0000a5c0, 0x4e82246c, 0x4e82246c, 0x3c801660, 0x3c801660},
+ {0x0000a5c4, 0x52822470, 0x52822470, 0x3f801861, 0x3f801861},
+ {0x0000a5c8, 0x55822490, 0x55822490, 0x43801a81, 0x43801a81},
+ {0x0000a5cc, 0x59822492, 0x59822492, 0x47801a83, 0x47801a83},
+ {0x0000a5d0, 0x5d822692, 0x5d822692, 0x4a801c84, 0x4a801c84},
+ {0x0000a5d4, 0x61822892, 0x61822892, 0x4e801ce3, 0x4e801ce3},
+ {0x0000a5d8, 0x65824890, 0x65824890, 0x52801ce5, 0x52801ce5},
+ {0x0000a5dc, 0x69824892, 0x69824892, 0x56801ce9, 0x56801ce9},
+ {0x0000a5e0, 0x6e824c92, 0x6e824c92, 0x5a801ceb, 0x5a801ceb},
+ {0x0000a5e4, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+ {0x0000a5e8, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+ {0x0000a5ec, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+ {0x0000a5f0, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+ {0x0000a5f4, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+ {0x0000a5f8, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+ {0x0000a5fc, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
{0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
{0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
- {0x0000a608, 0x01804601, 0x01804601, 0x00000000, 0x00000000},
- {0x0000a60c, 0x01804601, 0x01804601, 0x00000000, 0x00000000},
- {0x0000a610, 0x01804601, 0x01804601, 0x00000000, 0x00000000},
- {0x0000a614, 0x01804601, 0x01804601, 0x01404000, 0x01404000},
- {0x0000a618, 0x01804601, 0x01804601, 0x01404501, 0x01404501},
- {0x0000a61c, 0x01804601, 0x01804601, 0x02008501, 0x02008501},
- {0x0000a620, 0x03408d02, 0x03408d02, 0x0280ca03, 0x0280ca03},
- {0x0000a624, 0x0300cc03, 0x0300cc03, 0x03010c04, 0x03010c04},
- {0x0000a628, 0x03410d04, 0x03410d04, 0x04014c04, 0x04014c04},
- {0x0000a62c, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005},
- {0x0000a630, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005},
- {0x0000a634, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005},
- {0x0000a638, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005},
- {0x0000a63c, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005},
- {0x0000b2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352},
- {0x0000b2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584},
- {0x0000b2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800},
+ {0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000a610, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000a614, 0x02004000, 0x02004000, 0x01404000, 0x01404000},
+ {0x0000a618, 0x02004801, 0x02004801, 0x01404501, 0x01404501},
+ {0x0000a61c, 0x02808a02, 0x02808a02, 0x02008501, 0x02008501},
+ {0x0000a620, 0x0380ce03, 0x0380ce03, 0x0280ca03, 0x0280ca03},
+ {0x0000a624, 0x04411104, 0x04411104, 0x03010c04, 0x03010c04},
+ {0x0000a628, 0x04411104, 0x04411104, 0x04014c04, 0x04014c04},
+ {0x0000a62c, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
+ {0x0000a630, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
+ {0x0000a634, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
+ {0x0000a638, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
+ {0x0000a63c, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
+ {0x0000b2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352},
+ {0x0000b2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584},
+ {0x0000b2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800},
{0x0000b2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
- {0x0000c2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352},
- {0x0000c2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584},
- {0x0000c2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800},
+ {0x0000c2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352},
+ {0x0000c2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584},
+ {0x0000c2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800},
{0x0000c2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
{0x00016044, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4},
- {0x00016048, 0x61200001, 0x61200001, 0x66480001, 0x66480001},
+ {0x00016048, 0x66480001, 0x66480001, 0x66480001, 0x66480001},
{0x00016068, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c},
{0x00016444, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4},
- {0x00016448, 0x61200001, 0x61200001, 0x66480001, 0x66480001},
+ {0x00016448, 0x66480001, 0x66480001, 0x66480001, 0x66480001},
{0x00016468, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c},
{0x00016844, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4},
- {0x00016848, 0x61200001, 0x61200001, 0x66480001, 0x66480001},
+ {0x00016848, 0x66480001, 0x66480001, 0x66480001, 0x66480001},
{0x00016868, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c},
};
{ USB_DEVICE(0x04CA, 0x4605) }, /* Liteon */
{ USB_DEVICE(0x040D, 0x3801) }, /* VIA */
{ USB_DEVICE(0x0cf3, 0xb003) }, /* Ubiquiti WifiStation Ext */
+ { USB_DEVICE(0x0cf3, 0xb002) }, /* Ubiquiti WifiStation */
{ USB_DEVICE(0x057c, 0x8403) }, /* AVM FRITZ!WLAN 11N v2 USB */
{ USB_DEVICE(0x0cf3, 0x7015),
cancel_work_sync(&wldev->restart_work);
B43_WARN_ON(!wl);
+ if (!wldev->fw.ucode.data)
+ return; /* NULL if firmware never loaded */
if (wl->current_dev == wldev && wl->hw_registred) {
b43_leds_stop(wldev);
ieee80211_unregister_hw(wl->hw);
cancel_work_sync(&wldev->restart_work);
B43_WARN_ON(!wl);
+ if (!wldev->fw.ucode.data)
+ return; /* NULL if firmware never loaded */
if (wl->current_dev == wldev && wl->hw_registred) {
b43_leds_stop(wldev);
ieee80211_unregister_hw(wl->hw);
}
ret = brcmf_bus_start(dev);
- if (ret == -ENOLINK) {
+ if (ret) {
brcmf_dbg(ERROR, "dongle is not responding\n");
brcmf_detach(dev);
goto fail;
if (!request || !request->n_ssids || !request->n_match_sets) {
WL_ERR("Invalid sched scan req!! n_ssids:%d\n",
- request->n_ssids);
+ request ? request->n_ssids : 0);
return -EINVAL;
}
u8 *iovar_ie_buf;
u8 *curr_ie_buf;
u8 *mgmt_ie_buf = NULL;
- u32 mgmt_ie_buf_len = 0;
+ int mgmt_ie_buf_len;
u32 *mgmt_ie_len = 0;
u32 del_add_ie_buf_len = 0;
u32 total_ie_buf_len = 0;
struct parsed_vndr_ie_info *vndrie_info;
s32 i;
u8 *ptr;
- u32 remained_buf_len;
+ int remained_buf_len;
WL_TRACE("bssidx %d, pktflag : 0x%02X\n", bssidx, pktflag);
iovar_ie_buf = kzalloc(WL_EXTRA_BUF_MAX, GFP_KERNEL);
struct brcmf_cfg80211_profile *profile = cfg->profile;
struct brcmf_cfg80211_connect_info *conn_info = cfg_to_conn(cfg);
struct wiphy *wiphy = cfg_to_wiphy(cfg);
- struct brcmf_channel_info_le channel_le;
- struct ieee80211_channel *notify_channel;
+ struct ieee80211_channel *notify_channel = NULL;
struct ieee80211_supported_band *band;
+ struct brcmf_bss_info_le *bi;
u32 freq;
s32 err = 0;
u32 target_channel;
+ u8 *buf;
WL_TRACE("Enter\n");
memcpy(profile->bssid, e->addr, ETH_ALEN);
brcmf_update_bss_info(cfg);
- brcmf_exec_dcmd(ndev, BRCMF_C_GET_CHANNEL, &channel_le,
- sizeof(channel_le));
+ buf = kzalloc(WL_BSS_INFO_MAX, GFP_KERNEL);
+ if (buf == NULL) {
+ err = -ENOMEM;
+ goto done;
+ }
+
+ /* data sent to dongle has to be little endian */
+ *(__le32 *)buf = cpu_to_le32(WL_BSS_INFO_MAX);
+ err = brcmf_exec_dcmd(ndev, BRCMF_C_GET_BSS_INFO, buf, WL_BSS_INFO_MAX);
+
+ if (err)
+ goto done;
- target_channel = le32_to_cpu(channel_le.target_channel);
- WL_CONN("Roamed to channel %d\n", target_channel);
+ bi = (struct brcmf_bss_info_le *)(buf + 4);
+ target_channel = bi->ctl_ch ? bi->ctl_ch :
+ CHSPEC_CHANNEL(le16_to_cpu(bi->chanspec));
if (target_channel <= CH_MAX_2G_CHANNEL)
band = wiphy->bands[IEEE80211_BAND_2GHZ];
freq = ieee80211_channel_to_frequency(target_channel, band->band);
notify_channel = ieee80211_get_channel(wiphy, freq);
+done:
+ kfree(buf);
cfg80211_roamed(ndev, notify_channel, (u8 *)profile->bssid,
conn_info->req_ie, conn_info->req_ie_len,
conn_info->resp_ie, conn_info->resp_ie_len, GFP_KERNEL);
schedule_work(&cfg->event_work);
}
-static s32 brcmf_dongle_mode(struct net_device *ndev, s32 iftype)
-{
- s32 infra = 0;
- s32 err = 0;
-
- switch (iftype) {
- case NL80211_IFTYPE_MONITOR:
- case NL80211_IFTYPE_WDS:
- WL_ERR("type (%d) : currently we do not support this mode\n",
- iftype);
- err = -EINVAL;
- return err;
- case NL80211_IFTYPE_ADHOC:
- infra = 0;
- break;
- case NL80211_IFTYPE_STATION:
- infra = 1;
- break;
- case NL80211_IFTYPE_AP:
- infra = 1;
- break;
- default:
- err = -EINVAL;
- WL_ERR("invalid type (%d)\n", iftype);
- return err;
- }
- err = brcmf_exec_dcmd_u32(ndev, BRCMF_C_SET_INFRA, &infra);
- if (err) {
- WL_ERR("WLC_SET_INFRA error (%d)\n", err);
- return err;
- }
-
- return 0;
-}
-
static s32 brcmf_dongle_eventmsg(struct net_device *ndev)
{
/* Room for "event_msgs" + '\0' + bitvec */
WL_BEACON_TIMEOUT);
if (err)
goto default_conf_out;
- err = brcmf_dongle_mode(ndev, wdev->iftype);
+ err = brcmf_cfg80211_change_iface(wdev->wiphy, ndev, wdev->iftype,
+ NULL, NULL);
if (err && err != -EINPROGRESS)
goto default_conf_out;
err = brcmf_dongle_probecap(cfg);
} else
len = src->len;
- dst = alloc_skb(len + sizeof(*rt_hdr), GFP_ATOMIC);
+ dst = alloc_skb(len + sizeof(*rt_hdr) + sizeof(u16)*2, GFP_ATOMIC);
if (!dst)
continue;
* See iwlagn_mac_channel_switch.
*/
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- struct iwl6000_channel_switch_cmd cmd;
+ struct iwl6000_channel_switch_cmd *cmd;
u32 switch_time_in_usec, ucode_switch_time;
u16 ch;
u32 tsf_low;
struct ieee80211_vif *vif = ctx->vif;
struct iwl_host_cmd hcmd = {
.id = REPLY_CHANNEL_SWITCH,
- .len = { sizeof(cmd), },
+ .len = { sizeof(*cmd), },
.flags = CMD_SYNC,
- .data = { &cmd, },
+ .dataflags[0] = IWL_HCMD_DFL_NOCOPY,
};
+ int err;
- cmd.band = priv->band == IEEE80211_BAND_2GHZ;
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (!cmd)
+ return -ENOMEM;
+
+ hcmd.data[0] = cmd;
+
+ cmd->band = priv->band == IEEE80211_BAND_2GHZ;
ch = ch_switch->channel->hw_value;
IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
ctx->active.channel, ch);
- cmd.channel = cpu_to_le16(ch);
- cmd.rxon_flags = ctx->staging.flags;
- cmd.rxon_filter_flags = ctx->staging.filter_flags;
+ cmd->channel = cpu_to_le16(ch);
+ cmd->rxon_flags = ctx->staging.flags;
+ cmd->rxon_filter_flags = ctx->staging.filter_flags;
switch_count = ch_switch->count;
tsf_low = ch_switch->timestamp & 0x0ffffffff;
/*
switch_count = 0;
}
if (switch_count <= 1)
- cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
+ cmd->switch_time = cpu_to_le32(priv->ucode_beacon_time);
else {
switch_time_in_usec =
vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
ucode_switch_time = iwl_usecs_to_beacons(priv,
switch_time_in_usec,
beacon_interval);
- cmd.switch_time = iwl_add_beacon_time(priv,
- priv->ucode_beacon_time,
- ucode_switch_time,
- beacon_interval);
+ cmd->switch_time = iwl_add_beacon_time(priv,
+ priv->ucode_beacon_time,
+ ucode_switch_time,
+ beacon_interval);
}
IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
- cmd.switch_time);
- cmd.expect_beacon = ch_switch->channel->flags & IEEE80211_CHAN_RADAR;
+ cmd->switch_time);
+ cmd->expect_beacon = ch_switch->channel->flags & IEEE80211_CHAN_RADAR;
- return iwl_dvm_send_cmd(priv, &hcmd);
+ err = iwl_dvm_send_cmd(priv, &hcmd);
+ kfree(cmd);
+ return err;
}
struct iwl_lib_ops iwl6000_lib = {
return -EBUSY;
}
- priv->scan_request = request;
-
priv->user_scan_cfg = kzalloc(sizeof(struct mwifiex_user_scan_cfg),
GFP_KERNEL);
if (!priv->user_scan_cfg) {
return -ENOMEM;
}
+ priv->scan_request = request;
+
priv->user_scan_cfg->num_ssids = request->n_ssids;
priv->user_scan_cfg->ssid_list = request->ssids;
ret = mwifiex_scan_networks(priv, priv->user_scan_cfg);
if (ret) {
dev_err(priv->adapter->dev, "scan failed: %d\n", ret);
+ priv->scan_request = NULL;
+ kfree(priv->user_scan_cfg);
+ priv->user_scan_cfg = NULL;
return ret;
}
struct cfg80211_ssid *req_ssid)
{
struct mwifiex_adapter *adapter = priv->adapter;
- int ret = 0;
+ int ret;
struct mwifiex_user_scan_cfg *scan_cfg;
- if (!req_ssid)
- return -1;
-
if (adapter->scan_processing) {
- dev_dbg(adapter->dev, "cmd: Scan already in process...\n");
- return ret;
+ dev_err(adapter->dev, "cmd: Scan already in process...\n");
+ return -EBUSY;
}
if (priv->scan_block) {
- dev_dbg(adapter->dev,
+ dev_err(adapter->dev,
"cmd: Scan is blocked during association...\n");
- return ret;
+ return -EBUSY;
}
scan_cfg = kzalloc(sizeof(struct mwifiex_user_scan_cfg), GFP_KERNEL);
.disconnect = rt2x00usb_disconnect,
.suspend = rt2x00usb_suspend,
.resume = rt2x00usb_resume,
+ .reset_resume = rt2x00usb_resume,
.disable_hub_initiated_lpm = 1,
};
.disconnect = rt2x00usb_disconnect,
.suspend = rt2x00usb_suspend,
.resume = rt2x00usb_resume,
+ .reset_resume = rt2x00usb_resume,
.disable_hub_initiated_lpm = 1,
};
.disconnect = rt2x00usb_disconnect,
.suspend = rt2x00usb_suspend,
.resume = rt2x00usb_resume,
+ .reset_resume = rt2x00usb_resume,
.disable_hub_initiated_lpm = 1,
};
set_hal_start(rtlhal);
/* Start bulk IN */
- _rtl_usb_receive(hw);
+ err = _rtl_usb_receive(hw);
}
return err;
seq_printf(s, "group: %s\n", gname);
for (i = 0; i < num_pins; i++) {
pname = pin_get_name(pctldev, pins[i]);
- if (WARN_ON(!pname))
+ if (WARN_ON(!pname)) {
+ mutex_unlock(&pinctrl_mutex);
return -EINVAL;
+ }
seq_printf(s, "pin %d (%s)\n", pins[i], pname);
}
seq_puts(s, "\n");
seq_puts(s, "Pin config settings per pin group\n");
seq_puts(s, "Format: group (name): configs\n");
- mutex_lock(&pinctrl_mutex);
-
while (selector < ngroups) {
const char *gname = pctlops->get_group_name(pctldev, selector);
selector++;
}
- mutex_unlock(&pinctrl_mutex);
-
return 0;
}
struct nmk_gpio_chip *nmk_chip =
container_of(chip, struct nmk_gpio_chip, chip);
- return irq_find_mapping(nmk_chip->domain, offset);
+ return irq_create_mapping(nmk_chip->domain, offset);
}
#ifdef CONFIG_DEBUG_FS
struct clk *clk;
int secondary_irq;
void __iomem *base;
- int irq_start = -1;
+ int irq_start = 0;
int irq;
int ret;
if (!np)
irq_start = NOMADIK_GPIO_TO_IRQ(pdata->first_gpio);
- nmk_chip->domain = irq_domain_add_simple(NULL,
+ nmk_chip->domain = irq_domain_add_simple(np,
NMK_GPIO_PER_CHIP, irq_start,
&nmk_gpio_irq_simple_ops, nmk_chip);
if (!nmk_chip->domain) {
*bank = g->drv_bank;
*reg = g->drv_reg;
*bit = g->lpmd_bit;
- *width = 1;
+ *width = 2;
break;
case TEGRA_PINCONF_PARAM_DRIVE_DOWN_STRENGTH:
*bank = g->drv_bank;
FUNCTION(vi_alt3),
};
-#define MUXCTL_REG_A 0x3000
-#define PINGROUP_REG_A 0x868
+#define DRV_PINGROUP_REG_A 0x868 /* bank 0 */
+#define PINGROUP_REG_A 0x3000 /* bank 1 */
-#define PINGROUP_REG_Y(r) ((r) - MUXCTL_REG_A)
+#define PINGROUP_REG_Y(r) ((r) - PINGROUP_REG_A)
#define PINGROUP_REG_N(r) -1
#define PINGROUP(pg_name, f0, f1, f2, f3, f_safe, r, od, ior) \
}, \
.func_safe = TEGRA_MUX_ ## f_safe, \
.mux_reg = PINGROUP_REG_Y(r), \
- .mux_bank = 0, \
+ .mux_bank = 1, \
.mux_bit = 0, \
.pupd_reg = PINGROUP_REG_Y(r), \
- .pupd_bank = 0, \
+ .pupd_bank = 1, \
.pupd_bit = 2, \
.tri_reg = PINGROUP_REG_Y(r), \
- .tri_bank = 0, \
+ .tri_bank = 1, \
.tri_bit = 4, \
.einput_reg = PINGROUP_REG_Y(r), \
- .einput_bank = 0, \
+ .einput_bank = 1, \
.einput_bit = 5, \
.odrain_reg = PINGROUP_REG_##od(r), \
- .odrain_bank = 0, \
+ .odrain_bank = 1, \
.odrain_bit = 6, \
.lock_reg = PINGROUP_REG_Y(r), \
- .lock_bank = 0, \
+ .lock_bank = 1, \
.lock_bit = 7, \
.ioreset_reg = PINGROUP_REG_##ior(r), \
- .ioreset_bank = 0, \
+ .ioreset_bank = 1, \
.ioreset_bit = 8, \
.drv_reg = -1, \
}
.odrain_reg = -1, \
.lock_reg = -1, \
.ioreset_reg = -1, \
- .drv_reg = ((r) - PINGROUP_REG_A), \
- .drv_bank = 1, \
+ .drv_reg = ((r) - DRV_PINGROUP_REG_A), \
+ .drv_bank = 0, \
.hsm_bit = hsm_b, \
.schmitt_bit = schmitt_b, \
.lpmd_bit = lpmd_b, \
if (imxdi->ioaddr == NULL)
return -ENOMEM;
+ spin_lock_init(&imxdi->irq_lock);
+
imxdi->irq = platform_get_irq(pdev, 0);
if (imxdi->irq < 0)
return imxdi->irq;
/* Will be done on the slow path. */
return -EAGAIN;
}
- if (stsch_err(schid, &schib) || !css_sch_is_valid(&schib)) {
+ if (stsch_err(schid, &schib)) {
+ /* Subchannel is not provided. */
+ return -ENXIO;
+ }
+ if (!css_sch_is_valid(&schib)) {
/* Unusable - ignore. */
return 0;
}
case -ENOMEM:
case -EIO:
/* These should abort looping */
+ idset_sch_del_subseq(slow_subchannel_set, schid);
break;
default:
rc = 0;
/*
- * Copyright IBM Corp. 2007
+ * Copyright IBM Corp. 2007, 2012
* Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
*/
#include <linux/vmalloc.h>
+#include <linux/bitmap.h>
#include <linux/bitops.h>
#include "idset.h"
#include "css.h"
idset_del(set, schid.ssid, schid.sch_no);
}
+/* Clear ids starting from @schid up to end of subchannel set. */
+void idset_sch_del_subseq(struct idset *set, struct subchannel_id schid)
+{
+ int pos = schid.ssid * set->num_id + schid.sch_no;
+
+ bitmap_clear(set->bitmap, pos, set->num_id - schid.sch_no);
+}
+
int idset_sch_contains(struct idset *set, struct subchannel_id schid)
{
return idset_contains(set, schid.ssid, schid.sch_no);
int idset_is_empty(struct idset *set)
{
- int bitnum;
-
- bitnum = find_first_bit(set->bitmap, set->num_ssid * set->num_id);
- if (bitnum >= set->num_ssid * set->num_id)
- return 1;
- return 0;
+ return bitmap_empty(set->bitmap, set->num_ssid * set->num_id);
}
void idset_add_set(struct idset *to, struct idset *from)
{
- unsigned long i, len;
+ int len = min(__BITOPS_WORDS(to->num_ssid * to->num_id),
+ __BITOPS_WORDS(from->num_ssid * from->num_id));
- len = min(__BITOPS_WORDS(to->num_ssid * to->num_id),
- __BITOPS_WORDS(from->num_ssid * from->num_id));
- for (i = 0; i < len ; i++)
- to->bitmap[i] |= from->bitmap[i];
+ bitmap_or(to->bitmap, to->bitmap, from->bitmap, len);
}
/*
- * Copyright IBM Corp. 2007
+ * Copyright IBM Corp. 2007, 2012
* Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
*/
struct idset *idset_sch_new(void);
void idset_sch_add(struct idset *set, struct subchannel_id id);
void idset_sch_del(struct idset *set, struct subchannel_id id);
+void idset_sch_del_subseq(struct idset *set, struct subchannel_id schid);
int idset_sch_contains(struct idset *set, struct subchannel_id id);
int idset_sch_get_first(struct idset *set, struct subchannel_id *id);
int idset_is_empty(struct idset *set);
if (!ret) {
dev_err(ssp->dev, "DMA transfer timeout\n");
ret = -ETIMEDOUT;
+ dmaengine_terminate_all(ssp->dmach);
goto err_vmalloc;
}
first = last = 0;
}
- m->status = 0;
+ m->status = status;
spi_finalize_current_message(master);
return status;
printk(KERN_INFO "pl022: mapped registers from 0x%08x to %p\n",
adev->res.start, pl022->virtbase);
- pm_runtime_resume(dev);
-
pl022->clk = devm_clk_get(&adev->dev, NULL);
if (IS_ERR(pl022->clk)) {
status = PTR_ERR(pl022->clk);
clk_disable(pl022->clk);
clk_unprepare(pl022->clk);
- pm_runtime_disable(&adev->dev);
amba_release_regions(adev);
tasklet_disable(&pl022->pump_transfers);
spi_unregister_master(pl022->master);
unsigned char spsr;
/* for dmaengine */
- struct sh_dmae_slave dma_tx;
- struct sh_dmae_slave dma_rx;
struct dma_chan *chan_tx;
struct dma_chan *chan_rx;
int irq;
return ret;
}
-static bool rspi_filter(struct dma_chan *chan, void *filter_param)
-{
- chan->private = filter_param;
- return true;
-}
-
-static void __devinit rspi_request_dma(struct rspi_data *rspi,
- struct platform_device *pdev)
+static int __devinit rspi_request_dma(struct rspi_data *rspi,
+ struct platform_device *pdev)
{
struct rspi_plat_data *rspi_pd = pdev->dev.platform_data;
dma_cap_mask_t mask;
+ struct dma_slave_config cfg;
+ int ret;
if (!rspi_pd)
- return;
+ return 0; /* The driver assumes no error. */
rspi->dma_width_16bit = rspi_pd->dma_width_16bit;
if (rspi_pd->dma_rx_id && rspi_pd->dma_tx_id) {
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- rspi->dma_rx.slave_id = rspi_pd->dma_rx_id;
- rspi->chan_rx = dma_request_channel(mask, rspi_filter,
- &rspi->dma_rx);
- if (rspi->chan_rx)
- dev_info(&pdev->dev, "Use DMA when rx.\n");
+ rspi->chan_rx = dma_request_channel(mask, shdma_chan_filter,
+ (void *)rspi_pd->dma_rx_id);
+ if (rspi->chan_rx) {
+ cfg.slave_id = rspi_pd->dma_rx_id;
+ cfg.direction = DMA_DEV_TO_MEM;
+ ret = dmaengine_slave_config(rspi->chan_rx, &cfg);
+ if (!ret)
+ dev_info(&pdev->dev, "Use DMA when rx.\n");
+ else
+ return ret;
+ }
}
if (rspi_pd->dma_tx_id) {
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- rspi->dma_tx.slave_id = rspi_pd->dma_tx_id;
- rspi->chan_tx = dma_request_channel(mask, rspi_filter,
- &rspi->dma_tx);
- if (rspi->chan_tx)
- dev_info(&pdev->dev, "Use DMA when tx\n");
+ rspi->chan_tx = dma_request_channel(mask, shdma_chan_filter,
+ (void *)rspi_pd->dma_tx_id);
+ if (rspi->chan_tx) {
+ cfg.slave_id = rspi_pd->dma_tx_id;
+ cfg.direction = DMA_MEM_TO_DEV;
+ ret = dmaengine_slave_config(rspi->chan_tx, &cfg);
+ if (!ret)
+ dev_info(&pdev->dev, "Use DMA when tx\n");
+ else
+ return ret;
+ }
}
+
+ return 0;
}
static void __devexit rspi_release_dma(struct rspi_data *rspi)
}
rspi->irq = irq;
- rspi_request_dma(rspi, pdev);
+ ret = rspi_request_dma(rspi, pdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "rspi_request_dma failed.\n");
+ goto error4;
+ }
ret = spi_register_master(master);
if (ret < 0) {
page = &proc->pages[(page_addr - proc->buffer) / PAGE_SIZE];
BUG_ON(*page);
- *page = alloc_page(GFP_KERNEL | __GFP_ZERO);
+ *page = alloc_page(GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO);
if (*page == NULL) {
pr_err("binder: %d: binder_alloc_buf failed "
"for page at %p\n", proc->pid, page_addr);
struct binder_transaction *t;
t = container_of(w, struct binder_transaction, work);
- if (t->buffer->target_node && !(t->flags & TF_ONE_WAY))
+ if (t->buffer->target_node &&
+ !(t->flags & TF_ONE_WAY)) {
binder_send_failed_reply(t, BR_DEAD_REPLY);
+ } else {
+ binder_debug(BINDER_DEBUG_DEAD_TRANSACTION,
+ "binder: undelivered transaction %d\n",
+ t->debug_id);
+ t->buffer->transaction = NULL;
+ kfree(t);
+ binder_stats_deleted(BINDER_STAT_TRANSACTION);
+ }
} break;
case BINDER_WORK_TRANSACTION_COMPLETE: {
+ binder_debug(BINDER_DEBUG_DEAD_TRANSACTION,
+ "binder: undelivered TRANSACTION_COMPLETE\n");
kfree(w);
binder_stats_deleted(BINDER_STAT_TRANSACTION_COMPLETE);
} break;
+ case BINDER_WORK_DEAD_BINDER_AND_CLEAR:
+ case BINDER_WORK_CLEAR_DEATH_NOTIFICATION: {
+ struct binder_ref_death *death;
+
+ death = container_of(w, struct binder_ref_death, work);
+ binder_debug(BINDER_DEBUG_DEAD_TRANSACTION,
+ "binder: undelivered death notification, %p\n",
+ death->cookie);
+ kfree(death);
+ binder_stats_deleted(BINDER_STAT_DEATH);
+ } break;
default:
+ pr_err("binder: unexpected work type, %d, not freed\n",
+ w->type);
break;
}
}
nodes++;
rb_erase(&node->rb_node, &proc->nodes);
list_del_init(&node->work.entry);
+ binder_release_work(&node->async_todo);
if (hlist_empty(&node->refs)) {
kfree(node);
binder_stats_deleted(BINDER_STAT_NODE);
binder_delete_ref(ref);
}
binder_release_work(&proc->todo);
+ binder_release_work(&proc->delivered_death);
buffers = 0;
while ((n = rb_first(&proc->allocated_buffers))) {
struct comedi_subdevice *s;
int i;
+ if (!board || !devpriv)
+ return;
if (dev->subdevices) {
for (i = 0; i < board->n_8255; i++) {
s = &dev->subdevices[i];
const struct dio200_layout_struct *layout;
unsigned n;
+ if (!thisboard)
+ return;
if (dev->irq)
free_irq(dev->irq, dev);
if (dev->subdevices) {
static void pc236_detach(struct comedi_device *dev)
{
const struct pc236_board *thisboard = comedi_board(dev);
- struct pc236_private *devpriv = dev->private;
- if (devpriv)
+ if (!thisboard)
+ return;
+ if (dev->iobase)
pc236_intr_disable(dev);
if (dev->irq)
free_irq(dev->irq, dev);
{
const struct pc263_board *thisboard = comedi_board(dev);
+ if (!thisboard)
+ return;
if (is_isa_board(thisboard)) {
if (dev->iobase)
release_region(dev->iobase, PC263_IO_SIZE);
{
const struct das08_board_struct *thisboard = comedi_board(dev);
+ if (!thisboard)
+ return;
das08_common_detach(dev);
if (is_isa_board(thisboard)) {
if (dev->iobase)
}
data[1] = s->state & 0xff;
- data[1] |= inb(dev->iobase + DIO_R);
+ data[1] |= inb(dev->iobase + DIO_R) << 8;
return insn->n;
}
{
struct comedi_subdevice *s;
+ if (!thisboard)
+ return;
if (dev->subdevices) {
s = &dev->subdevices[2];
subdev_8255_cleanup(dev, s);
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_VOLTAGE:
- *val = 0;
- if (chan->channel == 0)
- *val2 = 1220;
- else
- *val2 = 610;
+ if (chan->channel == 0) {
+ *val = 1;
+ *val2 = 220000; /* 1.22 mV */
+ } else {
+ *val = 0;
+ *val2 = 610000; /* 0.610 mV */
+ }
return IIO_VAL_INT_PLUS_MICRO;
case IIO_TEMP:
- *val = 0;
- *val2 = -470000;
+ *val = -470; /* 0.47 C */
+ *val2 = 0;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_ACCEL:
*val = 0;
- *val2 = 462500;
- return IIO_VAL_INT_PLUS_MICRO;
+ *val2 = IIO_G_TO_M_S_2(462400); /* 0.4624 mg */
+ return IIO_VAL_INT_PLUS_NANO;
case IIO_INCLI:
*val = 0;
- *val2 = 100000;
+ *val2 = 100000; /* 0.1 degree */
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
break;
case IIO_CHAN_INFO_OFFSET:
- *val = 25;
+ *val = 25000 / -470 - 1278; /* 25 C = 1278 */
return IIO_VAL_INT;
case IIO_CHAN_INFO_CALIBBIAS:
switch (chan->type) {
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_VOLTAGE:
- *val = 0;
- if (chan->channel == 0)
- *val2 = 1220;
- else
- *val2 = 610;
+ if (chan->channel == 0) {
+ *val = 1;
+ *val2 = 220000; /* 1.22 mV */
+ } else {
+ *val = 0;
+ *val2 = 610000; /* 0.61 mV */
+ }
return IIO_VAL_INT_PLUS_MICRO;
case IIO_TEMP:
- *val = 0;
- *val2 = -470000;
+ *val = -470; /* -0.47 C */
+ *val2 = 0;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_INCLI:
*val = 0;
- *val2 = 25000;
+ *val2 = 25000; /* 0.025 degree */
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
case IIO_CHAN_INFO_OFFSET:
- *val = 25;
+ *val = 25000 / -470 - 1278; /* 25 C = 1278 */
return IIO_VAL_INT;
case IIO_CHAN_INFO_CALIBBIAS:
bits = 14;
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_VOLTAGE:
- *val = 0;
- if (chan->channel == 0)
- *val2 = 1220;
- else
- *val2 = 610;
+ if (chan->channel == 0) {
+ *val = 1;
+ *val2 = 220000; /* 1.22 mV */
+ } else {
+ *val = 0;
+ *val2 = 610000; /* 0.61 mV */
+ }
return IIO_VAL_INT_PLUS_MICRO;
case IIO_TEMP:
- *val = 0;
- *val2 = -470000;
+ *val = -470; /* 0.47 C */
+ *val2 = 0;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_ACCEL:
*val = 0;
switch (chan->channel2) {
case IIO_MOD_X:
case IIO_MOD_ROOT_SUM_SQUARED_X_Y:
- *val2 = 17125;
+ *val2 = IIO_G_TO_M_S_2(17125); /* 17.125 mg */
break;
case IIO_MOD_Y:
case IIO_MOD_Z:
- *val2 = 8407;
+ *val2 = IIO_G_TO_M_S_2(8407); /* 8.407 mg */
break;
}
return IIO_VAL_INT_PLUS_MICRO;
}
break;
case IIO_CHAN_INFO_OFFSET:
- *val = 25;
+ *val = 25000 / -470 - 1278; /* 25 C = 1278 */
return IIO_VAL_INT;
case IIO_CHAN_INFO_CALIBBIAS:
case IIO_CHAN_INFO_PEAK:
case IIO_VOLTAGE:
*val = 0;
if (chan->channel == 0)
- *val2 = 305180;
+ *val2 = 305180; /* 0.30518 mV */
else
- *val2 = 610500;
+ *val2 = 610500; /* 0.6105 mV */
return IIO_VAL_INT_PLUS_MICRO;
case IIO_TEMP:
- *val = 0;
- *val2 = -470000;
+ *val = -470; /* -0.47 C */
+ *val2 = 0;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_ACCEL:
*val = 0;
- *val2 = 2394;
- return IIO_VAL_INT_PLUS_MICRO;
+ *val2 = IIO_G_TO_M_S_2(244140); /* 0.244140 mg */
+ return IIO_VAL_INT_PLUS_NANO;
case IIO_INCLI:
+ case IIO_ROT:
*val = 0;
- *val2 = 436;
+ *val2 = 25000; /* 0.025 degree */
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
break;
case IIO_CHAN_INFO_OFFSET:
- *val = 25;
+ *val = 25000 / -470 - 0x4FE; /* 25 C = 0x4FE */
return IIO_VAL_INT;
case IIO_CHAN_INFO_CALIBBIAS:
switch (chan->type) {
.modified = 1,
.channel2 = IIO_MOD_X,
.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
+ IIO_CHAN_INFO_SCALE_SHARED_BIT,
.address = rot,
.scan_index = ADIS16209_SCAN_ROT,
.scan_type = {
break;
case IIO_CHAN_INFO_OFFSET:
if (chan->type == IIO_TEMP) {
- *val = 25;
+ *val = 25000 / -470 - 1278; /* 25 C = 1278 */
return IIO_VAL_INT;
}
addrind = 1;
addrind = 2;
break;
case IIO_CHAN_INFO_SCALE:
- *val = 0;
switch (chan->type) {
case IIO_TEMP:
- *val2 = -470000;
+ *val = -470; /* -0.47 C */
+ *val2 = 0;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_ACCEL:
- *val2 = 1887042;
+ *val2 = IIO_G_TO_M_S_2(19073); /* 19.073 g */
return IIO_VAL_INT_PLUS_MICRO;
case IIO_VOLTAGE:
- if (chan->channel == 0)
- *val2 = 0012221;
- else /* Should really be dependent on VDD */
- *val2 = 305;
+ if (chan->channel == 0) {
+ *val = 1;
+ *val2 = 220700; /* 1.2207 mV */
+ } else {
+ /* Should really be dependent on VDD */
+ *val2 = 305180; /* 305.18 uV */
+ }
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_VOLTAGE:
- *val = 0;
- if (chan->channel == 0)
- *val2 = 4880;
- else
+ if (chan->channel == 0) {
+ *val = 4;
+ *val2 = 880000; /* 4.88 mV */
+ return IIO_VAL_INT_PLUS_MICRO;
+ } else {
return -EINVAL;
- return IIO_VAL_INT_PLUS_MICRO;
+ }
case IIO_TEMP:
- *val = 0;
- *val2 = 244000;
+ *val = 244; /* 0.244 C */
+ *val2 = 0;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_ACCEL:
*val = 0;
- *val2 = 504062;
+ *val2 = IIO_G_TO_M_S_2(51400); /* 51.4 mg */
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
break;
case IIO_CHAN_INFO_PEAK_SCALE:
- *val = 6;
- *val2 = 629295;
+ *val = 0;
+ *val2 = IIO_G_TO_M_S_2(51400); /* 51.4 mg */
return IIO_VAL_INT_PLUS_MICRO;
case IIO_CHAN_INFO_OFFSET:
- *val = 25;
+ *val = 25000 / 244 - 0x133; /* 25 C = 0x133 */
return IIO_VAL_INT;
case IIO_CHAN_INFO_CALIBBIAS:
bits = 10;
switch (chan->type) {
case IIO_ANGL_VEL:
*val = 0;
- if (spi_get_device_id(st->us)->driver_data)
- *val2 = 320;
- else
- *val2 = 1278;
+ if (spi_get_device_id(st->us)->driver_data) {
+ /* 0.01832 degree / sec */
+ *val2 = IIO_DEGREE_TO_RAD(18320);
+ } else {
+ /* 0.07326 degree / sec */
+ *val2 = IIO_DEGREE_TO_RAD(73260);
+ }
return IIO_VAL_INT_PLUS_MICRO;
case IIO_VOLTAGE:
- *val = 0;
- if (chan->channel == 0)
- *val2 = 18315;
- else
- *val2 = 610500;
+ if (chan->channel == 0) {
+ *val = 1;
+ *val2 = 831500; /* 1.8315 mV */
+ } else {
+ *val = 0;
+ *val2 = 610500; /* 610.5 uV */
+ }
return IIO_VAL_INT_PLUS_MICRO;
case IIO_TEMP:
- *val = 0;
- *val2 = 145300;
+ *val = 145;
+ *val2 = 300000; /* 0.1453 C */
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
break;
case IIO_CHAN_INFO_OFFSET:
- *val = 25;
+ *val = 250000 / 1453; /* 25 C = 0x00 */
return IIO_VAL_INT;
case IIO_CHAN_INFO_CALIBBIAS:
switch (chan->type) {
const long flags;
unsigned int gyro_scale_micro;
unsigned int accel_scale_micro;
+ int temp_scale_nano;
+ int temp_offset;
unsigned long default_scan_mask;
};
return IIO_VAL_INT_PLUS_MICRO;
case IIO_VOLTAGE:
*val = 0;
- if (chan->channel == 0)
- *val2 = 2418;
- else
- *val2 = 806;
+ if (chan->channel == 0) {
+ *val = 2;
+ *val2 = 418000; /* 2.418 mV */
+ } else {
+ *val = 0;
+ *val2 = 805800; /* 805.8 uV */
+ }
return IIO_VAL_INT_PLUS_MICRO;
case IIO_ACCEL:
*val = 0;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_MAGN:
*val = 0;
- *val2 = 500;
+ *val2 = 500; /* 0.5 mgauss */
return IIO_VAL_INT_PLUS_MICRO;
case IIO_TEMP:
- *val = 0;
- *val2 = 140000;
+ *val = st->variant->temp_scale_nano / 1000000;
+ *val2 = (st->variant->temp_scale_nano % 1000000);
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
return IIO_VAL_INT;
case IIO_CHAN_INFO_OFFSET:
/* currently only temperature */
- *val = 198;
- *val2 = 160000;
- return IIO_VAL_INT_PLUS_MICRO;
+ *val = st->variant->temp_offset;
+ return IIO_VAL_INT;
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
mutex_lock(&indio_dev->mlock);
/* Need both the number of taps and the sampling frequency */
.indexed = 1,
.channel = 0,
.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+ IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
IIO_CHAN_INFO_SCALE_SHARED_BIT,
.address = temp0,
.scan_index = ADIS16400_SCAN_TEMP,
[ADIS16300] = {
.channels = adis16300_channels,
.num_channels = ARRAY_SIZE(adis16300_channels),
- .gyro_scale_micro = 873,
+ .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
.accel_scale_micro = 5884,
+ .temp_scale_nano = 140000000, /* 0.14 C */
+ .temp_offset = 25000000 / 140000, /* 25 C = 0x00 */
.default_scan_mask = (1 << ADIS16400_SCAN_SUPPLY) |
(1 << ADIS16400_SCAN_GYRO_X) | (1 << ADIS16400_SCAN_ACC_X) |
(1 << ADIS16400_SCAN_ACC_Y) | (1 << ADIS16400_SCAN_ACC_Z) |
[ADIS16334] = {
.channels = adis16334_channels,
.num_channels = ARRAY_SIZE(adis16334_channels),
- .gyro_scale_micro = 873,
- .accel_scale_micro = 981,
+ .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
+ .accel_scale_micro = IIO_G_TO_M_S_2(1000), /* 1 mg */
+ .temp_scale_nano = 67850000, /* 0.06785 C */
+ .temp_offset = 25000000 / 67850, /* 25 C = 0x00 */
.default_scan_mask = (1 << ADIS16400_SCAN_GYRO_X) |
(1 << ADIS16400_SCAN_GYRO_Y) | (1 << ADIS16400_SCAN_GYRO_Z) |
(1 << ADIS16400_SCAN_ACC_X) | (1 << ADIS16400_SCAN_ACC_Y) |
[ADIS16350] = {
.channels = adis16350_channels,
.num_channels = ARRAY_SIZE(adis16350_channels),
- .gyro_scale_micro = 872664,
- .accel_scale_micro = 24732,
+ .gyro_scale_micro = IIO_DEGREE_TO_RAD(73260), /* 0.07326 deg/s */
+ .accel_scale_micro = IIO_G_TO_M_S_2(2522), /* 0.002522 g */
+ .temp_scale_nano = 145300000, /* 0.1453 C */
+ .temp_offset = 25000000 / 145300, /* 25 C = 0x00 */
.default_scan_mask = 0x7FF,
.flags = ADIS16400_NO_BURST,
},
.num_channels = ARRAY_SIZE(adis16350_channels),
.flags = ADIS16400_HAS_PROD_ID,
.product_id = 0x3FE8,
- .gyro_scale_micro = 1279,
- .accel_scale_micro = 24732,
+ .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
+ .accel_scale_micro = IIO_G_TO_M_S_2(3333), /* 3.333 mg */
+ .temp_scale_nano = 136000000, /* 0.136 C */
+ .temp_offset = 25000000 / 136000, /* 25 C = 0x00 */
.default_scan_mask = 0x7FF,
},
[ADIS16362] = {
.num_channels = ARRAY_SIZE(adis16350_channels),
.flags = ADIS16400_HAS_PROD_ID,
.product_id = 0x3FEA,
- .gyro_scale_micro = 1279,
- .accel_scale_micro = 24732,
+ .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
+ .accel_scale_micro = IIO_G_TO_M_S_2(333), /* 0.333 mg */
+ .temp_scale_nano = 136000000, /* 0.136 C */
+ .temp_offset = 25000000 / 136000, /* 25 C = 0x00 */
.default_scan_mask = 0x7FF,
},
[ADIS16364] = {
.num_channels = ARRAY_SIZE(adis16350_channels),
.flags = ADIS16400_HAS_PROD_ID,
.product_id = 0x3FEC,
- .gyro_scale_micro = 1279,
- .accel_scale_micro = 24732,
+ .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
+ .accel_scale_micro = IIO_G_TO_M_S_2(1000), /* 1 mg */
+ .temp_scale_nano = 136000000, /* 0.136 C */
+ .temp_offset = 25000000 / 136000, /* 25 C = 0x00 */
.default_scan_mask = 0x7FF,
},
[ADIS16365] = {
.num_channels = ARRAY_SIZE(adis16350_channels),
.flags = ADIS16400_HAS_PROD_ID,
.product_id = 0x3FED,
- .gyro_scale_micro = 1279,
- .accel_scale_micro = 24732,
+ .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
+ .accel_scale_micro = IIO_G_TO_M_S_2(1000), /* 1 mg */
+ .temp_scale_nano = 136000000, /* 0.136 C */
+ .temp_offset = 25000000 / 136000, /* 25 C = 0x00 */
.default_scan_mask = 0x7FF,
},
[ADIS16400] = {
.num_channels = ARRAY_SIZE(adis16400_channels),
.flags = ADIS16400_HAS_PROD_ID,
.product_id = 0x4015,
- .gyro_scale_micro = 873,
- .accel_scale_micro = 32656,
+ .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
+ .accel_scale_micro = IIO_G_TO_M_S_2(3333), /* 3.333 mg */
.default_scan_mask = 0xFFF,
+ .temp_scale_nano = 140000000, /* 0.14 C */
+ .temp_offset = 25000000 / 140000, /* 25 C = 0x00 */
}
};
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include "tpci200.h"
static u16 tpci200_status_timeout[] = {
* DSS, GPU, etc. are not cache coherent:
*/
if (omap_obj->flags & (OMAP_BO_WC|OMAP_BO_UNCACHED)) {
- addrs = kmalloc(npages * sizeof(addrs), GFP_KERNEL);
+ addrs = kmalloc(npages * sizeof(*addrs), GFP_KERNEL);
if (!addrs) {
ret = -ENOMEM;
goto free_pages;
0, PAGE_SIZE, DMA_BIDIRECTIONAL);
}
} else {
- addrs = kzalloc(npages * sizeof(addrs), GFP_KERNEL);
+ addrs = kzalloc(npages * sizeof(*addrs), GFP_KERNEL);
if (!addrs) {
ret = -ENOMEM;
goto free_pages;
config RAMSTER
bool "Cross-machine RAM capacity sharing, aka peer-to-peer tmem"
depends on CONFIGFS_FS=y && SYSFS=y && !HIGHMEM && ZCACHE2=y
+ depends on NET
# must ensure struct page is 8-byte aligned
select HAVE_ALIGNED_STRUCT_PAGE if !64_BIT
default n
u32 ul_num_bytes,
struct hw_mmu_map_attrs_t *hw_attrs);
-bool wait_for_start(struct bridge_dev_context *dev_context, u32 dw_sync_addr);
+bool wait_for_start(struct bridge_dev_context *dev_context,
+ void __iomem *sync_addr);
/* ----------------------------------- Globals */
{
int status = 0;
struct bridge_dev_context *dev_context = dev_ctxt;
- u32 dw_sync_addr = 0;
+ void __iomem *sync_addr;
u32 ul_shm_base; /* Gpp Phys SM base addr(byte) */
u32 ul_shm_base_virt; /* Dsp Virt SM base addr */
u32 ul_tlb_base_virt; /* Base of MMU TLB entry */
+ u32 shm_sync_pa;
/* Offset of shm_base_virt from tlb_base_virt */
u32 ul_shm_offset_virt;
s32 entry_ndx;
/* Kernel logical address */
ul_shm_base = dev_context->atlb_entry[0].gpp_va + ul_shm_offset_virt;
+ /* SHM physical sync address */
+ shm_sync_pa = dev_context->atlb_entry[0].gpp_pa + ul_shm_offset_virt +
+ SHMSYNCOFFSET;
+
/* 2nd wd is used as sync field */
- dw_sync_addr = ul_shm_base + SHMSYNCOFFSET;
+ sync_addr = ioremap(shm_sync_pa, SZ_32);
+ if (!sync_addr)
+ return -ENOMEM;
+
/* Write a signature into the shm base + offset; this will
* get cleared when the DSP program starts. */
if ((ul_shm_base_virt == 0) || (ul_shm_base == 0)) {
pr_err("%s: Illegal SM base\n", __func__);
status = -EPERM;
} else
- __raw_writel(0xffffffff, dw_sync_addr);
+ __raw_writel(0xffffffff, sync_addr);
if (!status) {
resources = dev_context->resources;
* function is made available.
*/
void __iomem *ctrl = ioremap(0x48002000, SZ_4K);
- if (!ctrl)
+ if (!ctrl) {
+ iounmap(sync_addr);
return -ENOMEM;
+ }
(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST1_IVA2_MASK,
OMAP3430_RST1_IVA2_MASK, OMAP3430_IVA2_MOD,
(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST1_IVA2_MASK, 0,
OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
- dev_dbg(bridge, "Waiting for Sync @ 0x%x\n", dw_sync_addr);
+ dev_dbg(bridge, "Waiting for Sync @ 0x%x\n", *(u32 *)sync_addr);
dev_dbg(bridge, "DSP c_int00 Address = 0x%x\n", dsp_addr);
if (dsp_debug)
- while (__raw_readw(dw_sync_addr))
+ while (__raw_readw(sync_addr))
;
/* Wait for DSP to clear word in shared memory */
/* Read the Location */
- if (!wait_for_start(dev_context, dw_sync_addr))
+ if (!wait_for_start(dev_context, sync_addr))
status = -ETIMEDOUT;
dev_get_symbol(dev_context->dev_obj, "_WDT_enable", &wdt_en);
/* Write the synchronization bit to indicate the
* completion of OPP table update to DSP
*/
- __raw_writel(0XCAFECAFE, dw_sync_addr);
+ __raw_writel(0XCAFECAFE, sync_addr);
/* update board state */
dev_context->brd_state = BRD_RUNNING;
dev_context->brd_state = BRD_UNKNOWN;
}
}
+
+ iounmap(sync_addr);
+
return status;
}
* ======== wait_for_start ========
* Wait for the singal from DSP that it has started, or time out.
*/
-bool wait_for_start(struct bridge_dev_context *dev_context, u32 dw_sync_addr)
+bool wait_for_start(struct bridge_dev_context *dev_context,
+ void __iomem *sync_addr)
{
u16 timeout = TIHELEN_ACKTIMEOUT;
/* Wait for response from board */
- while (__raw_readw(dw_sync_addr) && --timeout)
+ while (__raw_readw(sync_addr) && --timeout)
udelay(10);
/* If timed out: return false */
HW_MMU_SUPERSECTION
};
-/*
- * FUNCTION : mmu_flush_entry
- *
- * INPUTS:
- *
- * Identifier : base_address
- * Type : const u32
- * Description : Base Address of instance of MMU module
- *
- * RETURNS:
- *
- * Type : hw_status
- * Description : 0 -- No errors occurred
- * RET_BAD_NULL_PARAM -- A Pointer
- * Parameter was set to NULL
- *
- * PURPOSE: : Flush the TLB entry pointed by the
- * lock counter register
- * even if this entry is set protected
- *
- * METHOD: : Check the Input parameter and Flush a
- * single entry in the TLB.
- */
-static hw_status mmu_flush_entry(const void __iomem *base_address);
-
/*
* FUNCTION : mmu_set_cam_entry
*
* INPUTS:
*
* Identifier : base_address
- * TypE : const u32
+ * Type : void __iomem *
* Description : Base Address of instance of MMU module
*
* Identifier : page_sz
*
* METHOD: : Check the Input parameters and set the CAM entry.
*/
-static hw_status mmu_set_cam_entry(const void __iomem *base_address,
+static hw_status mmu_set_cam_entry(void __iomem *base_address,
const u32 page_sz,
const u32 preserved_bit,
const u32 valid_bit,
* INPUTS:
*
* Identifier : base_address
- * Type : const u32
+ * Type : void __iomem *
* Description : Base Address of instance of MMU module
*
* Identifier : physical_addr
*
* METHOD: : Check the Input parameters and set the RAM entry.
*/
-static hw_status mmu_set_ram_entry(const void __iomem *base_address,
+static hw_status mmu_set_ram_entry(void __iomem *base_address,
const u32 physical_addr,
enum hw_endianism_t endianism,
enum hw_element_size_t element_size,
/* HW FUNCTIONS */
-hw_status hw_mmu_enable(const void __iomem *base_address)
+hw_status hw_mmu_enable(void __iomem *base_address)
{
hw_status status = 0;
return status;
}
-hw_status hw_mmu_disable(const void __iomem *base_address)
+hw_status hw_mmu_disable(void __iomem *base_address)
{
hw_status status = 0;
return status;
}
-hw_status hw_mmu_num_locked_set(const void __iomem *base_address,
+hw_status hw_mmu_num_locked_set(void __iomem *base_address,
u32 num_locked_entries)
{
hw_status status = 0;
return status;
}
-hw_status hw_mmu_victim_num_set(const void __iomem *base_address,
+hw_status hw_mmu_victim_num_set(void __iomem *base_address,
u32 victim_entry_num)
{
hw_status status = 0;
return status;
}
-hw_status hw_mmu_event_ack(const void __iomem *base_address, u32 irq_mask)
+hw_status hw_mmu_event_ack(void __iomem *base_address, u32 irq_mask)
{
hw_status status = 0;
return status;
}
-hw_status hw_mmu_event_disable(const void __iomem *base_address, u32 irq_mask)
+hw_status hw_mmu_event_disable(void __iomem *base_address, u32 irq_mask)
{
hw_status status = 0;
u32 irq_reg;
return status;
}
-hw_status hw_mmu_event_enable(const void __iomem *base_address, u32 irq_mask)
+hw_status hw_mmu_event_enable(void __iomem *base_address, u32 irq_mask)
{
hw_status status = 0;
u32 irq_reg;
return status;
}
-hw_status hw_mmu_event_status(const void __iomem *base_address, u32 *irq_mask)
+hw_status hw_mmu_event_status(void __iomem *base_address, u32 *irq_mask)
{
hw_status status = 0;
return status;
}
-hw_status hw_mmu_fault_addr_read(const void __iomem *base_address, u32 *addr)
+hw_status hw_mmu_fault_addr_read(void __iomem *base_address, u32 *addr)
{
hw_status status = 0;
return status;
}
-hw_status hw_mmu_ttb_set(const void __iomem *base_address, u32 ttb_phys_addr)
+hw_status hw_mmu_ttb_set(void __iomem *base_address, u32 ttb_phys_addr)
{
hw_status status = 0;
u32 load_ttb;
return status;
}
-hw_status hw_mmu_twl_enable(const void __iomem *base_address)
+hw_status hw_mmu_twl_enable(void __iomem *base_address)
{
hw_status status = 0;
return status;
}
-hw_status hw_mmu_twl_disable(const void __iomem *base_address)
+hw_status hw_mmu_twl_disable(void __iomem *base_address)
{
hw_status status = 0;
return status;
}
-hw_status hw_mmu_tlb_flush(const void __iomem *base_address, u32 virtual_addr,
- u32 page_sz)
-{
- hw_status status = 0;
- u32 virtual_addr_tag;
- enum hw_mmu_page_size_t pg_size_bits;
-
- switch (page_sz) {
- case HW_PAGE_SIZE4KB:
- pg_size_bits = HW_MMU_SMALL_PAGE;
- break;
-
- case HW_PAGE_SIZE64KB:
- pg_size_bits = HW_MMU_LARGE_PAGE;
- break;
-
- case HW_PAGE_SIZE1MB:
- pg_size_bits = HW_MMU_SECTION;
- break;
-
- case HW_PAGE_SIZE16MB:
- pg_size_bits = HW_MMU_SUPERSECTION;
- break;
-
- default:
- return -EINVAL;
- }
-
- /* Generate the 20-bit tag from virtual address */
- virtual_addr_tag = ((virtual_addr & MMU_ADDR_MASK) >> 12);
-
- mmu_set_cam_entry(base_address, pg_size_bits, 0, 0, virtual_addr_tag);
-
- mmu_flush_entry(base_address);
-
- return status;
-}
-
-hw_status hw_mmu_tlb_add(const void __iomem *base_address,
+hw_status hw_mmu_tlb_add(void __iomem *base_address,
u32 physical_addr,
u32 virtual_addr,
u32 page_sz,
return status;
}
-/* mmu_flush_entry */
-static hw_status mmu_flush_entry(const void __iomem *base_address)
-{
- hw_status status = 0;
- u32 flush_entry_data = 0x1;
-
- /* write values to register */
- MMUMMU_FLUSH_ENTRY_WRITE_REGISTER32(base_address, flush_entry_data);
-
- return status;
-}
-
/* mmu_set_cam_entry */
-static hw_status mmu_set_cam_entry(const void __iomem *base_address,
+static hw_status mmu_set_cam_entry(void __iomem *base_address,
const u32 page_sz,
const u32 preserved_bit,
const u32 valid_bit,
}
/* mmu_set_ram_entry */
-static hw_status mmu_set_ram_entry(const void __iomem *base_address,
+static hw_status mmu_set_ram_entry(void __iomem *base_address,
const u32 physical_addr,
enum hw_endianism_t endianism,
enum hw_element_size_t element_size,
}
-void hw_mmu_tlb_flush_all(const void __iomem *base)
+void hw_mmu_tlb_flush_all(void __iomem *base)
{
__raw_writel(1, base + MMU_GFLUSH);
}
bool donotlockmpupage;
};
-extern hw_status hw_mmu_enable(const void __iomem *base_address);
+extern hw_status hw_mmu_enable(void __iomem *base_address);
-extern hw_status hw_mmu_disable(const void __iomem *base_address);
+extern hw_status hw_mmu_disable(void __iomem *base_address);
-extern hw_status hw_mmu_num_locked_set(const void __iomem *base_address,
+extern hw_status hw_mmu_num_locked_set(void __iomem *base_address,
u32 num_locked_entries);
-extern hw_status hw_mmu_victim_num_set(const void __iomem *base_address,
+extern hw_status hw_mmu_victim_num_set(void __iomem *base_address,
u32 victim_entry_num);
/* For MMU faults */
-extern hw_status hw_mmu_event_ack(const void __iomem *base_address,
+extern hw_status hw_mmu_event_ack(void __iomem *base_address,
u32 irq_mask);
-extern hw_status hw_mmu_event_disable(const void __iomem *base_address,
+extern hw_status hw_mmu_event_disable(void __iomem *base_address,
u32 irq_mask);
-extern hw_status hw_mmu_event_enable(const void __iomem *base_address,
+extern hw_status hw_mmu_event_enable(void __iomem *base_address,
u32 irq_mask);
-extern hw_status hw_mmu_event_status(const void __iomem *base_address,
+extern hw_status hw_mmu_event_status(void __iomem *base_address,
u32 *irq_mask);
-extern hw_status hw_mmu_fault_addr_read(const void __iomem *base_address,
+extern hw_status hw_mmu_fault_addr_read(void __iomem *base_address,
u32 *addr);
/* Set the TT base address */
-extern hw_status hw_mmu_ttb_set(const void __iomem *base_address,
+extern hw_status hw_mmu_ttb_set(void __iomem *base_address,
u32 ttb_phys_addr);
-extern hw_status hw_mmu_twl_enable(const void __iomem *base_address);
+extern hw_status hw_mmu_twl_enable(void __iomem *base_address);
-extern hw_status hw_mmu_twl_disable(const void __iomem *base_address);
+extern hw_status hw_mmu_twl_disable(void __iomem *base_address);
-extern hw_status hw_mmu_tlb_flush(const void __iomem *base_address,
- u32 virtual_addr, u32 page_sz);
-
-extern hw_status hw_mmu_tlb_add(const void __iomem *base_address,
+extern hw_status hw_mmu_tlb_add(void __iomem *base_address,
u32 physical_addr,
u32 virtual_addr,
u32 page_sz,
extern hw_status hw_mmu_pte_clear(const u32 pg_tbl_va,
u32 virtual_addr, u32 page_size);
-void hw_mmu_tlb_flush_all(const void __iomem *base);
+void hw_mmu_tlb_flush_all(void __iomem *base);
static inline u32 hw_mmu_pte_addr_l1(u32 l1_base, u32 va)
{
u32 chnl_buf_size;
u32 num_chnls;
void __iomem *per_base;
- u32 per_pm_base;
- u32 core_pm_base;
+ void __iomem *per_pm_base;
+ void __iomem *core_pm_base;
void __iomem *dmmu_base;
};
#include <asm/cacheflush.h>
#include <linux/dma-mapping.h>
-/* TODO -- Remove, once BP defines them */
-#define INT_DSP_MMU_IRQ 28
+/* TODO -- Remove, once omap-iommu is used */
+#define INT_DSP_MMU_IRQ (28 + NR_IRQS)
#define PRCM_VDD1 1
OMAP_DSP_MEM3_SIZE);
host_res->per_base = ioremap(OMAP_PER_CM_BASE,
OMAP_PER_CM_SIZE);
- host_res->per_pm_base = (u32) ioremap(OMAP_PER_PRM_BASE,
- OMAP_PER_PRM_SIZE);
- host_res->core_pm_base = (u32) ioremap(OMAP_CORE_PRM_BASE,
- OMAP_CORE_PRM_SIZE);
+ host_res->per_pm_base = ioremap(OMAP_PER_PRM_BASE,
+ OMAP_PER_PRM_SIZE);
+ host_res->core_pm_base = ioremap(OMAP_CORE_PRM_BASE,
+ OMAP_CORE_PRM_SIZE);
host_res->dmmu_base = ioremap(OMAP_DMMU_BASE,
OMAP_DMMU_SIZE);
u32 pul_value;
u32 dynext_base;
u32 off_set = 0;
- u32 ul_stack_seg_addr, ul_stack_seg_val;
- u32 ul_gpp_mem_base;
+ u32 ul_stack_seg_val;
struct cfg_hostres *host_res;
struct bridge_dev_context *pbridge_context;
u32 mapped_addr = 0;
if (strcmp((char *)
pnode->dcd_props.obj_data.node_obj.ndb_props.
stack_seg_name, STACKSEGLABEL) == 0) {
+ void __iomem *stack_seg;
+ u32 stack_seg_pa;
+
status =
hnode_mgr->nldr_fxns.
get_fxn_addr(pnode->nldr_node_obj, "DYNEXT_BEG",
goto func_end;
}
- ul_gpp_mem_base = (u32) host_res->mem_base[1];
off_set = pul_value - dynext_base;
- ul_stack_seg_addr = ul_gpp_mem_base + off_set;
- ul_stack_seg_val = readl(ul_stack_seg_addr);
+ stack_seg_pa = host_res->mem_phys[1] + off_set;
+ stack_seg = ioremap(stack_seg_pa, SZ_32);
+ if (!stack_seg) {
+ status = -ENOMEM;
+ goto func_end;
+ }
+
+ ul_stack_seg_val = readl(stack_seg);
+
+ iounmap(stack_seg);
dev_dbg(bridge, "%s: StackSegVal = 0x%x, StackSegAddr ="
" 0x%x\n", __func__, ul_stack_seg_val,
- ul_stack_seg_addr);
+ host_res->mem_base[1] + off_set);
pnode->create_args.asa.task_arg_obj.stack_seg =
ul_stack_seg_val;
cmem = zs_map_object(zram->mem_pool, zram->table[index].handle,
ZS_MM_RO);
- ret = lzo1x_decompress_safe(cmem, zram->table[index].size,
+ if (zram->table[index].size == PAGE_SIZE) {
+ memcpy(uncmem, cmem, PAGE_SIZE);
+ ret = LZO_E_OK;
+ } else {
+ ret = lzo1x_decompress_safe(cmem, zram->table[index].size,
uncmem, &clen);
+ }
if (is_partial_io(bvec)) {
memcpy(user_mem + bvec->bv_offset, uncmem + offset,
goto out;
}
- if (unlikely(clen > max_zpage_size))
+ if (unlikely(clen > max_zpage_size)) {
zram_stat_inc(&zram->stats.bad_compress);
+ src = uncmem;
+ clen = PAGE_SIZE;
+ }
handle = zs_malloc(zram->mem_pool, clen);
if (!handle) {
/*
* IXON Flag:
- * Flow control for OMAP.TX
- * OMAP.RX should listen for XON/XOFF
+ * Enable XON/XOFF flow control on output.
+ * Transmit XON1, XOFF1
*/
if (termios->c_iflag & IXON)
- up->efr |= OMAP_UART_SW_RX;
+ up->efr |= OMAP_UART_SW_TX;
/*
* IXOFF Flag:
- * Flow control for OMAP.RX
- * OMAP.TX should send XON/XOFF
+ * Enable XON/XOFF flow control on input.
+ * Receiver compares XON1, XOFF1.
*/
if (termios->c_iflag & IXOFF)
- up->efr |= OMAP_UART_SW_TX;
+ up->efr |= OMAP_UART_SW_RX;
serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
int limit = 100;
spin_lock_irqsave (&hub->tt.lock, flags);
- while (--limit && !list_empty (&hub->tt.clear_list)) {
+ while (!list_empty(&hub->tt.clear_list)) {
struct list_head *next;
struct usb_tt_clear *clear;
struct usb_device *hdev = hub->hdev;
const struct hc_driver *drv;
int status;
+ if (!hub->quiescing && --limit < 0)
+ break;
+
next = hub->tt.clear_list.next;
clear = list_entry (next, struct usb_tt_clear, clear_list);
list_del (&clear->clear_list);
if (hub->has_indicators)
cancel_delayed_work_sync(&hub->leds);
if (hub->tt.hub)
- cancel_work_sync(&hub->tt.clear_work);
+ flush_work(&hub->tt.clear_work);
}
/* caller has locked the hub device */
#if defined(PLX_PCI_RDK2)
/* see if PCI int for us by checking irqstat */
intcsr = readl(dev->rdk2.fpga_base_addr + RDK2_IRQSTAT);
- if (!intcsr & (1 << NET2272_PCI_IRQ))
+ if (!intcsr & (1 << NET2272_PCI_IRQ)) {
+ spin_unlock(&dev->lock);
return IRQ_NONE;
+ }
/* check dma interrupts */
#endif
/* Platform/devcice interrupt handler */
/* Pegatron Lucid (Ordissimo AIRIS) */
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "M11JB"),
- DMI_MATCH(DMI_BIOS_VERSION, "Lucid-GE-133"),
+ DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"),
+ },
+ },
+ {
+ /* Pegatron Lucid (Ordissimo) */
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "Ordissimo"),
+ DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"),
},
},
{ }
int i;
/* Fields are 32 bits wide, DMA addresses are in bytes */
int field_size = 32 / 8;
- struct xhci_slot_ctx *slot_ctx;
dma_addr_t dma = ctx->dma;
int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
dbg_rsvd64(xhci, (u64 *)ctrl_ctx, dma);
}
- slot_ctx = xhci_get_slot_ctx(xhci, ctx);
xhci_dbg_slot_ctx(xhci, ctx);
xhci_dbg_ep_ctx(xhci, ctx, last_ep);
}
if (portsc & PORT_DEV_REMOVE)
port_removable |= 1 << (i + 1);
}
- memset(&desc->u.ss.DeviceRemovable,
- (__force __u16) cpu_to_le16(port_removable),
- sizeof(__u16));
+
+ desc->u.ss.DeviceRemovable = cpu_to_le16(port_removable);
}
static void xhci_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
temp = xhci_readl(xhci, port_array[wIndex]);
xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", wIndex, temp);
+ spin_unlock_irqrestore(&xhci->lock, flags);
temp = usb_acpi_power_manageable(hcd->self.root_hub,
wIndex);
if (temp)
usb_acpi_set_power_state(hcd->self.root_hub,
wIndex, true);
+ spin_lock_irqsave(&xhci->lock, flags);
break;
case USB_PORT_FEAT_RESET:
temp = (temp | PORT_RESET);
xhci_writel(xhci, temp & ~PORT_POWER,
port_array[wIndex]);
+ spin_unlock_irqrestore(&xhci->lock, flags);
temp = usb_acpi_power_manageable(hcd->self.root_hub,
wIndex);
if (temp)
usb_acpi_set_power_state(hcd->self.root_hub,
wIndex, false);
+ spin_lock_irqsave(&xhci->lock, flags);
break;
default:
goto error;
cur_seg = find_trb_seg(xhci->cmd_ring->first_seg,
xhci->cmd_ring->dequeue, &cycle_state);
+ if (!cur_seg) {
+ xhci_warn(xhci, "Command ring mismatch, dequeue = %p %llx (dma)\n",
+ xhci->cmd_ring->dequeue,
+ (unsigned long long)
+ xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
+ xhci->cmd_ring->dequeue));
+ xhci_debug_ring(xhci, xhci->cmd_ring);
+ xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
+ return;
+ }
+
/* find the command trb matched by cd from command ring */
for (cmd_trb = xhci->cmd_ring->dequeue;
cmd_trb != xhci->cmd_ring->enqueue;
struct xhci_hcd *xhci;
struct xhci_container_ctx *in_ctx, *out_ctx;
unsigned int ep_index;
- struct xhci_ep_ctx *ep_ctx;
struct xhci_slot_ctx *slot_ctx;
struct xhci_input_control_ctx *ctrl_ctx;
u32 added_ctxs;
out_ctx = virt_dev->out_ctx;
ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
ep_index = xhci_get_endpoint_index(&ep->desc);
- ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
/* If this endpoint is already in use, and the upper layers are trying
* to add it again without dropping it, reject the addition.
case COMP_EBADSLT:
dev_warn(&udev->dev, "WARN: slot not enabled for"
"evaluate context command.\n");
+ ret = -EINVAL;
+ break;
case COMP_CTX_STATE:
dev_warn(&udev->dev, "WARN: invalid context state for "
"evaluate context command.\n");
static unsigned long long xhci_service_interval_to_ns(
struct usb_endpoint_descriptor *desc)
{
- return (1 << (desc->bInterval - 1)) * 125 * 1000;
+ return (1ULL << (desc->bInterval - 1)) * 125 * 1000;
}
static u16 xhci_get_timeout_no_hub_lpm(struct usb_device *udev,
(xhci_service_interval_to_ns(desc) > timeout_ns))
timeout_ns = xhci_service_interval_to_ns(desc);
- u2_del_ns = udev->bos->ss_cap->bU2DevExitLat * 1000;
+ u2_del_ns = le16_to_cpu(udev->bos->ss_cap->bU2DevExitLat) * 1000ULL;
if (u2_del_ns > timeout_ns)
timeout_ns = u2_del_ns;
}
EXPORT_SYMBOL_GPL(ezusb_fx2_ihex_firmware_download);
+MODULE_LICENSE("GPL");
struct platform_device *musb;
struct resource *res;
struct resource resources[2];
- char res_name[10];
+ char res_name[11];
int ret, musbid;
/* get memory resource */
- sprintf(res_name, "musb%d", id);
+ snprintf(res_name, sizeof(res_name), "musb%d", id);
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name);
if (!res) {
dev_err(dev, "%s get mem resource failed\n", res_name);
resources[0] = *res;
/* get irq resource */
- sprintf(res_name, "musb%d-irq", id);
+ snprintf(res_name, sizeof(res_name), "musb%d-irq", id);
res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res_name);
if (!res) {
dev_err(dev, "%s get irq resource failed\n", res_name);
of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps);
of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits);
- sprintf(res_name, "port%d-mode", id);
+ snprintf(res_name, sizeof(res_name), "port%d-mode", id);
of_property_read_u32(np, res_name, (u32 *)&pdata->mode);
of_property_read_u32(np, "power", (u32 *)&pdata->power);
config->multipoint = of_property_read_bool(np, "multipoint");
dev_dbg(dev, " %s %d (%d/ %d)\n",
fifo->name, usbhs_pipe_number(pipe), pkt->length, pkt->zero);
+ usbhs_pipe_enable(pipe);
usbhsf_dma_start(pipe, fifo);
dma_async_issue_pending(chan);
}
struct device *dev = usbhs_priv_to_dev(priv);
unsigned long flags;
+ if (unlikely(!uep)) {
+ dev_err(dev, "no uep\n");
+ return;
+ }
+
/******************** spin lock ********************/
usbhs_lock(priv, flags);
return r;
}
-/* allocate private data */
-static int ch341_attach(struct usb_serial *serial)
+static int ch341_port_probe(struct usb_serial_port *port)
{
struct ch341_private *priv;
int r;
- /* private data */
priv = kzalloc(sizeof(struct ch341_private), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->baud_rate = DEFAULT_BAUD_RATE;
priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
- r = ch341_configure(serial->dev, priv);
+ r = ch341_configure(port->serial->dev, priv);
if (r < 0)
goto error;
- usb_set_serial_port_data(serial->port[0], priv);
+ usb_set_serial_port_data(port, priv);
return 0;
error: kfree(priv);
return r;
}
+static int ch341_port_remove(struct usb_serial_port *port)
+{
+ struct ch341_private *priv;
+
+ priv = usb_get_serial_port_data(port);
+ kfree(priv);
+
+ return 0;
+}
+
static int ch341_carrier_raised(struct usb_serial_port *port)
{
struct ch341_private *priv = usb_get_serial_port_data(port);
static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
- struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]);
+ struct ch341_private *priv = usb_get_serial_port_data(port);
int r;
priv->baud_rate = DEFAULT_BAUD_RATE;
.tiocmget = ch341_tiocmget,
.tiocmset = ch341_tiocmset,
.read_int_callback = ch341_read_int_callback,
- .attach = ch341_attach,
+ .port_probe = ch341_port_probe,
+ .port_remove = ch341_port_remove,
.reset_resume = ch341_reset_resume,
};
static int digi_startup(struct usb_serial *serial);
static void digi_disconnect(struct usb_serial *serial);
static void digi_release(struct usb_serial *serial);
+static int digi_port_probe(struct usb_serial_port *port);
+static int digi_port_remove(struct usb_serial_port *port);
static void digi_read_bulk_callback(struct urb *urb);
static int digi_read_inb_callback(struct urb *urb);
static int digi_read_oob_callback(struct urb *urb);
.attach = digi_startup,
.disconnect = digi_disconnect,
.release = digi_release,
+ .port_probe = digi_port_probe,
+ .port_remove = digi_port_remove,
};
static struct usb_serial_driver digi_acceleport_4_device = {
.attach = digi_startup,
.disconnect = digi_disconnect,
.release = digi_release,
+ .port_probe = digi_port_probe,
+ .port_remove = digi_port_remove,
};
static struct usb_serial_driver * const serial_drivers[] = {
return ret;
}
-
-static int digi_startup(struct usb_serial *serial)
+static int digi_port_init(struct usb_serial_port *port, unsigned port_num)
{
-
- int i;
struct digi_port *priv;
- struct digi_serial *serial_priv;
- /* allocate the private data structures for all ports */
- /* number of regular ports + 1 for the out-of-band port */
- for (i = 0; i < serial->type->num_ports + 1; i++) {
- /* allocate port private structure */
- priv = kmalloc(sizeof(struct digi_port), GFP_KERNEL);
- if (priv == NULL) {
- while (--i >= 0)
- kfree(usb_get_serial_port_data(serial->port[i]));
- return 1; /* error */
- }
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
- /* initialize port private structure */
- spin_lock_init(&priv->dp_port_lock);
- priv->dp_port_num = i;
- priv->dp_out_buf_len = 0;
- priv->dp_write_urb_in_use = 0;
- priv->dp_modem_signals = 0;
- init_waitqueue_head(&priv->dp_modem_change_wait);
- priv->dp_transmit_idle = 0;
- init_waitqueue_head(&priv->dp_transmit_idle_wait);
- priv->dp_throttled = 0;
- priv->dp_throttle_restart = 0;
- init_waitqueue_head(&priv->dp_flush_wait);
- init_waitqueue_head(&priv->dp_close_wait);
- INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock);
- priv->dp_port = serial->port[i];
- /* initialize write wait queue for this port */
- init_waitqueue_head(&serial->port[i]->write_wait);
-
- usb_set_serial_port_data(serial->port[i], priv);
- }
+ spin_lock_init(&priv->dp_port_lock);
+ priv->dp_port_num = port_num;
+ init_waitqueue_head(&priv->dp_modem_change_wait);
+ init_waitqueue_head(&priv->dp_transmit_idle_wait);
+ init_waitqueue_head(&priv->dp_flush_wait);
+ init_waitqueue_head(&priv->dp_close_wait);
+ INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock);
+ priv->dp_port = port;
- /* allocate serial private structure */
- serial_priv = kmalloc(sizeof(struct digi_serial), GFP_KERNEL);
- if (serial_priv == NULL) {
- for (i = 0; i < serial->type->num_ports + 1; i++)
- kfree(usb_get_serial_port_data(serial->port[i]));
- return 1; /* error */
- }
+ init_waitqueue_head(&port->write_wait);
+
+ usb_set_serial_port_data(port, priv);
+
+ return 0;
+}
+
+static int digi_startup(struct usb_serial *serial)
+{
+ struct digi_serial *serial_priv;
+ int ret;
+
+ serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL);
+ if (!serial_priv)
+ return -ENOMEM;
- /* initialize serial private structure */
spin_lock_init(&serial_priv->ds_serial_lock);
serial_priv->ds_oob_port_num = serial->type->num_ports;
serial_priv->ds_oob_port = serial->port[serial_priv->ds_oob_port_num];
- serial_priv->ds_device_started = 0;
+
+ ret = digi_port_init(serial_priv->ds_oob_port,
+ serial_priv->ds_oob_port_num);
+ if (ret) {
+ kfree(serial_priv);
+ return ret;
+ }
+
usb_set_serial_data(serial, serial_priv);
return 0;
static void digi_release(struct usb_serial *serial)
{
- int i;
+ struct digi_serial *serial_priv;
+ struct digi_port *priv;
+
+ serial_priv = usb_get_serial_data(serial);
+
+ priv = usb_get_serial_port_data(serial_priv->ds_oob_port);
+ kfree(priv);
- /* free the private data structures for all ports */
- /* number of regular ports + 1 for the out-of-band port */
- for (i = 0; i < serial->type->num_ports + 1; i++)
- kfree(usb_get_serial_port_data(serial->port[i]));
- kfree(usb_get_serial_data(serial));
+ kfree(serial_priv);
}
+static int digi_port_probe(struct usb_serial_port *port)
+{
+ unsigned port_num;
+
+ port_num = port->number - port->serial->minor;
+
+ return digi_port_init(port, port_num);
+}
+
+static int digi_port_remove(struct usb_serial_port *port)
+{
+ struct digi_port *priv;
+
+ priv = usb_get_serial_port_data(port);
+ kfree(priv);
+
+ return 0;
+}
static void digi_read_bulk_callback(struct urb *urb)
{
return 0;
}
-/* fake probe - only to allocate data structures */
-static int ipw_probe(struct usb_serial *serial, const struct usb_device_id *id)
+static int ipw_attach(struct usb_serial *serial)
{
struct usb_wwan_intf_private *data;
.num_ports = 1,
.open = ipw_open,
.close = ipw_close,
- .probe = ipw_probe,
- .attach = usb_wwan_startup,
+ .attach = ipw_attach,
.release = ipw_release,
+ .port_probe = usb_wwan_port_probe,
.port_remove = usb_wwan_port_remove,
.dtr_rts = ipw_dtr_rts,
.write = usb_wwan_write,
data in device_details */
static void keyspan_setup_urbs(struct usb_serial *serial)
{
- int i, j;
struct keyspan_serial_private *s_priv;
const struct keyspan_device_details *d_details;
- struct usb_serial_port *port;
- struct keyspan_port_private *p_priv;
struct callbacks *cback;
- int endp;
s_priv = usb_get_serial_data(serial);
d_details = s_priv->device_details;
(serial, d_details->glocont_endpoint, USB_DIR_OUT,
serial, s_priv->glocont_buf, GLOCONT_BUFLEN,
cback->glocont_callback);
-
- /* Setup endpoints for each port specific thing */
- for (i = 0; i < d_details->num_ports; i++) {
- port = serial->port[i];
- p_priv = usb_get_serial_port_data(port);
-
- /* Do indat endpoints first, once for each flip */
- endp = d_details->indat_endpoints[i];
- for (j = 0; j <= d_details->indat_endp_flip; ++j, ++endp) {
- p_priv->in_urbs[j] = keyspan_setup_urb
- (serial, endp, USB_DIR_IN, port,
- p_priv->in_buffer[j], 64,
- cback->indat_callback);
- }
- for (; j < 2; ++j)
- p_priv->in_urbs[j] = NULL;
-
- /* outdat endpoints also have flip */
- endp = d_details->outdat_endpoints[i];
- for (j = 0; j <= d_details->outdat_endp_flip; ++j, ++endp) {
- p_priv->out_urbs[j] = keyspan_setup_urb
- (serial, endp, USB_DIR_OUT, port,
- p_priv->out_buffer[j], 64,
- cback->outdat_callback);
- }
- for (; j < 2; ++j)
- p_priv->out_urbs[j] = NULL;
-
- /* inack endpoint */
- p_priv->inack_urb = keyspan_setup_urb
- (serial, d_details->inack_endpoints[i], USB_DIR_IN,
- port, p_priv->inack_buffer, 1, cback->inack_callback);
-
- /* outcont endpoint */
- p_priv->outcont_urb = keyspan_setup_urb
- (serial, d_details->outcont_endpoints[i], USB_DIR_OUT,
- port, p_priv->outcont_buffer, 64,
- cback->outcont_callback);
- }
}
/* usa19 function doesn't require prescaler */
static int keyspan_startup(struct usb_serial *serial)
{
int i, err;
- struct usb_serial_port *port;
struct keyspan_serial_private *s_priv;
- struct keyspan_port_private *p_priv;
const struct keyspan_device_details *d_details;
for (i = 0; (d_details = keyspan_devices[i]) != NULL; ++i)
s_priv->device_details = d_details;
usb_set_serial_data(serial, s_priv);
- /* Now setup per port private data */
- for (i = 0; i < serial->num_ports; i++) {
- port = serial->port[i];
- p_priv = kzalloc(sizeof(struct keyspan_port_private),
- GFP_KERNEL);
- if (!p_priv) {
- dev_dbg(&port->dev, "%s - kmalloc for keyspan_port_private (%d) failed!.\n", __func__, i);
- return 1;
- }
- p_priv->device_details = d_details;
- usb_set_serial_port_data(port, p_priv);
- }
-
keyspan_setup_urbs(serial);
if (s_priv->instat_urb != NULL) {
static void keyspan_disconnect(struct usb_serial *serial)
{
- int i, j;
- struct usb_serial_port *port;
- struct keyspan_serial_private *s_priv;
- struct keyspan_port_private *p_priv;
+ struct keyspan_serial_private *s_priv;
s_priv = usb_get_serial_data(serial);
- /* Stop reading/writing urbs */
stop_urb(s_priv->instat_urb);
stop_urb(s_priv->glocont_urb);
stop_urb(s_priv->indat_urb);
- for (i = 0; i < serial->num_ports; ++i) {
- port = serial->port[i];
- p_priv = usb_get_serial_port_data(port);
- stop_urb(p_priv->inack_urb);
- stop_urb(p_priv->outcont_urb);
- for (j = 0; j < 2; j++) {
- stop_urb(p_priv->in_urbs[j]);
- stop_urb(p_priv->out_urbs[j]);
- }
- }
+}
+
+static void keyspan_release(struct usb_serial *serial)
+{
+ struct keyspan_serial_private *s_priv;
+
+ s_priv = usb_get_serial_data(serial);
- /* Now free them */
usb_free_urb(s_priv->instat_urb);
usb_free_urb(s_priv->indat_urb);
usb_free_urb(s_priv->glocont_urb);
- for (i = 0; i < serial->num_ports; ++i) {
- port = serial->port[i];
- p_priv = usb_get_serial_port_data(port);
- usb_free_urb(p_priv->inack_urb);
- usb_free_urb(p_priv->outcont_urb);
- for (j = 0; j < 2; j++) {
- usb_free_urb(p_priv->in_urbs[j]);
- usb_free_urb(p_priv->out_urbs[j]);
- }
- }
+
+ kfree(s_priv);
}
-static void keyspan_release(struct usb_serial *serial)
+static int keyspan_port_probe(struct usb_serial_port *port)
{
- int i;
- struct usb_serial_port *port;
- struct keyspan_serial_private *s_priv;
+ struct usb_serial *serial = port->serial;
+ struct keyspan_port_private *s_priv;
+ struct keyspan_port_private *p_priv;
+ const struct keyspan_device_details *d_details;
+ struct callbacks *cback;
+ int endp;
+ int port_num;
+ int i;
s_priv = usb_get_serial_data(serial);
+ d_details = s_priv->device_details;
- kfree(s_priv);
+ p_priv = kzalloc(sizeof(*p_priv), GFP_KERNEL);
+ if (!p_priv)
+ return -ENOMEM;
- /* Now free per port private data */
- for (i = 0; i < serial->num_ports; i++) {
- port = serial->port[i];
- kfree(usb_get_serial_port_data(port));
+ s_priv = usb_get_serial_data(port->serial);
+ p_priv->device_details = d_details;
+
+ /* Setup values for the various callback routines */
+ cback = &keyspan_callbacks[d_details->msg_format];
+
+ port_num = port->number - port->serial->minor;
+
+ /* Do indat endpoints first, once for each flip */
+ endp = d_details->indat_endpoints[port_num];
+ for (i = 0; i <= d_details->indat_endp_flip; ++i, ++endp) {
+ p_priv->in_urbs[i] = keyspan_setup_urb(serial, endp,
+ USB_DIR_IN, port,
+ p_priv->in_buffer[i], 64,
+ cback->indat_callback);
+ }
+ /* outdat endpoints also have flip */
+ endp = d_details->outdat_endpoints[port_num];
+ for (i = 0; i <= d_details->outdat_endp_flip; ++i, ++endp) {
+ p_priv->out_urbs[i] = keyspan_setup_urb(serial, endp,
+ USB_DIR_OUT, port,
+ p_priv->out_buffer[i], 64,
+ cback->outdat_callback);
+ }
+ /* inack endpoint */
+ p_priv->inack_urb = keyspan_setup_urb(serial,
+ d_details->inack_endpoints[port_num],
+ USB_DIR_IN, port,
+ p_priv->inack_buffer, 1,
+ cback->inack_callback);
+ /* outcont endpoint */
+ p_priv->outcont_urb = keyspan_setup_urb(serial,
+ d_details->outcont_endpoints[port_num],
+ USB_DIR_OUT, port,
+ p_priv->outcont_buffer, 64,
+ cback->outcont_callback);
+
+ usb_set_serial_port_data(port, p_priv);
+
+ return 0;
+}
+
+static int keyspan_port_remove(struct usb_serial_port *port)
+{
+ struct keyspan_port_private *p_priv;
+ int i;
+
+ p_priv = usb_get_serial_port_data(port);
+
+ stop_urb(p_priv->inack_urb);
+ stop_urb(p_priv->outcont_urb);
+ for (i = 0; i < 2; i++) {
+ stop_urb(p_priv->in_urbs[i]);
+ stop_urb(p_priv->out_urbs[i]);
+ }
+
+ usb_free_urb(p_priv->inack_urb);
+ usb_free_urb(p_priv->outcont_urb);
+ for (i = 0; i < 2; i++) {
+ usb_free_urb(p_priv->in_urbs[i]);
+ usb_free_urb(p_priv->out_urbs[i]);
}
+
+ kfree(p_priv);
+
+ return 0;
}
MODULE_AUTHOR(DRIVER_AUTHOR);
static int keyspan_startup (struct usb_serial *serial);
static void keyspan_disconnect (struct usb_serial *serial);
static void keyspan_release (struct usb_serial *serial);
+static int keyspan_port_probe(struct usb_serial_port *port);
+static int keyspan_port_remove(struct usb_serial_port *port);
static int keyspan_write_room (struct tty_struct *tty);
static int keyspan_write (struct tty_struct *tty,
.attach = keyspan_startup,
.disconnect = keyspan_disconnect,
.release = keyspan_release,
+ .port_probe = keyspan_port_probe,
+ .port_remove = keyspan_port_remove,
};
static struct usb_serial_driver keyspan_2port_device = {
.attach = keyspan_startup,
.disconnect = keyspan_disconnect,
.release = keyspan_release,
+ .port_probe = keyspan_port_probe,
+ .port_remove = keyspan_port_remove,
};
static struct usb_serial_driver keyspan_4port_device = {
.attach = keyspan_startup,
.disconnect = keyspan_disconnect,
.release = keyspan_release,
+ .port_probe = keyspan_port_probe,
+ .port_remove = keyspan_port_remove,
};
static struct usb_serial_driver * const serial_drivers[] = {
* Function prototypes
*/
static int mct_u232_startup(struct usb_serial *serial);
-static void mct_u232_release(struct usb_serial *serial);
+static int mct_u232_port_probe(struct usb_serial_port *port);
+static int mct_u232_port_remove(struct usb_serial_port *remove);
static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port);
static void mct_u232_close(struct usb_serial_port *port);
static void mct_u232_dtr_rts(struct usb_serial_port *port, int on);
.tiocmget = mct_u232_tiocmget,
.tiocmset = mct_u232_tiocmset,
.attach = mct_u232_startup,
- .release = mct_u232_release,
+ .port_probe = mct_u232_port_probe,
+ .port_remove = mct_u232_port_remove,
.ioctl = mct_u232_ioctl,
.get_icount = mct_u232_get_icount,
};
static int mct_u232_startup(struct usb_serial *serial)
{
- struct mct_u232_private *priv;
struct usb_serial_port *port, *rport;
- priv = kzalloc(sizeof(struct mct_u232_private), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
- spin_lock_init(&priv->lock);
- init_waitqueue_head(&priv->msr_wait);
- usb_set_serial_port_data(serial->port[0], priv);
-
- init_waitqueue_head(&serial->port[0]->write_wait);
-
/* Puh, that's dirty */
port = serial->port[0];
rport = serial->port[1];
return 0;
} /* mct_u232_startup */
+static int mct_u232_port_probe(struct usb_serial_port *port)
+{
+ struct mct_u232_private *priv;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ spin_lock_init(&priv->lock);
+ init_waitqueue_head(&priv->msr_wait);
+
+ usb_set_serial_port_data(port, priv);
-static void mct_u232_release(struct usb_serial *serial)
+ return 0;
+}
+
+static int mct_u232_port_remove(struct usb_serial_port *port)
{
struct mct_u232_private *priv;
- int i;
- for (i = 0; i < serial->num_ports; ++i) {
- /* My special items, the standard routines free my urbs */
- priv = usb_get_serial_port_data(serial->port[i]);
- kfree(priv);
- }
-} /* mct_u232_release */
+ priv = usb_get_serial_port_data(port);
+ kfree(priv);
+
+ return 0;
+}
static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port)
{
static void mct_u232_close(struct usb_serial_port *port)
{
- if (port->serial->dev) {
- /* shutdown our urbs */
- usb_kill_urb(port->write_urb);
- usb_kill_urb(port->read_urb);
- usb_kill_urb(port->interrupt_in_urb);
- }
+ /*
+ * Must kill the read urb as it is actually an interrupt urb, which
+ * generic close thus fails to kill.
+ */
+ usb_kill_urb(port->read_urb);
+ usb_kill_urb(port->interrupt_in_urb);
+
+ usb_serial_generic_close(port);
} /* mct_u232_close */
{
dev_dbg(&port->dev, "%s\n", __func__);
- if (port->serial->dev) {
- /* Shutdown any interrupt in urbs. */
- if (port->interrupt_in_urb) {
- usb_unlink_urb(port->interrupt_in_urb);
- usb_kill_urb(port->interrupt_in_urb);
- }
-
- /* Send deactivate cmd to device */
+ usb_unlink_urb(port->interrupt_in_urb);
+ usb_kill_urb(port->interrupt_in_urb);
+
+ mutex_lock(&port->serial->disc_mutex);
+ if (!port->serial->disconnected)
metrousb_send_unidirectional_cmd(UNI_CMD_CLOSE, port);
- }
+ mutex_unlock(&port->serial->disc_mutex);
}
static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port)
return retval;
}
-static void metrousb_shutdown(struct usb_serial *serial)
+static int metrousb_port_probe(struct usb_serial_port *port)
{
- int i = 0;
+ struct metrousb_private *metro_priv;
- dev_dbg(&serial->dev->dev, "%s\n", __func__);
+ metro_priv = kzalloc(sizeof(*metro_priv), GFP_KERNEL);
+ if (!metro_priv)
+ return -ENOMEM;
- /* Stop reading and writing on all ports. */
- for (i = 0; i < serial->num_ports; ++i) {
- /* Close any open urbs. */
- metrousb_cleanup(serial->port[i]);
+ spin_lock_init(&metro_priv->lock);
- /* Free memory. */
- kfree(usb_get_serial_port_data(serial->port[i]));
- usb_set_serial_port_data(serial->port[i], NULL);
+ usb_set_serial_port_data(port, metro_priv);
- dev_dbg(&serial->dev->dev, "%s - freed port number=%d\n",
- __func__, serial->port[i]->number);
- }
+ return 0;
}
-static int metrousb_startup(struct usb_serial *serial)
+static int metrousb_port_remove(struct usb_serial_port *port)
{
struct metrousb_private *metro_priv;
- struct usb_serial_port *port;
- int i = 0;
- dev_dbg(&serial->dev->dev, "%s\n", __func__);
-
- /* Loop through the serial ports setting up the private structures.
- * Currently we only use one port. */
- for (i = 0; i < serial->num_ports; ++i) {
- port = serial->port[i];
-
- /* Declare memory. */
- metro_priv = kzalloc(sizeof(struct metrousb_private), GFP_KERNEL);
- if (!metro_priv)
- return -ENOMEM;
-
- /* Initialize memory. */
- spin_lock_init(&metro_priv->lock);
- usb_set_serial_port_data(port, metro_priv);
-
- dev_dbg(&serial->dev->dev, "%s - port number=%d\n ",
- __func__, port->number);
- }
+ metro_priv = usb_get_serial_port_data(port);
+ kfree(metro_priv);
return 0;
}
.close = metrousb_cleanup,
.read_int_callback = metrousb_read_int_callback,
.write_int_callback = metrousb_write_int_callback,
- .attach = metrousb_startup,
- .release = metrousb_shutdown,
+ .port_probe = metrousb_port_probe,
+ .port_remove = metrousb_port_remove,
.throttle = metrousb_throttle,
.unthrottle = metrousb_unthrottle,
.tiocmget = metrousb_tiocmget,
static int mos7720_startup(struct usb_serial *serial)
{
- struct moschip_port *mos7720_port;
struct usb_device *dev;
- int i;
char data;
u16 product;
int ret_val;
serial->port[1]->interrupt_in_buffer = NULL;
}
-
- /* set up serial port private structures */
- for (i = 0; i < serial->num_ports; ++i) {
- mos7720_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
- if (mos7720_port == NULL) {
- dev_err(&dev->dev, "%s - Out of memory\n", __func__);
- return -ENOMEM;
- }
-
- /* Initialize all port interrupt end point to port 0 int
- * endpoint. Our device has only one interrupt endpoint
- * common to all ports */
- serial->port[i]->interrupt_in_endpointAddress =
- serial->port[0]->interrupt_in_endpointAddress;
-
- mos7720_port->port = serial->port[i];
- usb_set_serial_port_data(serial->port[i], mos7720_port);
-
- dev_dbg(&dev->dev, "port number is %d\n", serial->port[i]->number);
- dev_dbg(&dev->dev, "serial number is %d\n", serial->minor);
- }
-
-
/* setting configuration feature to one */
usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
(__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ);
static void mos7720_release(struct usb_serial *serial)
{
- int i;
-
#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
/* close the parallel port */
kref_put(&mos_parport->ref_count, destroy_mos_parport);
}
#endif
- /* free private structure allocated for serial port */
- for (i = 0; i < serial->num_ports; ++i)
- kfree(usb_get_serial_port_data(serial->port[i]));
+}
+
+static int mos7720_port_probe(struct usb_serial_port *port)
+{
+ struct moschip_port *mos7720_port;
+
+ mos7720_port = kzalloc(sizeof(*mos7720_port), GFP_KERNEL);
+ if (!mos7720_port)
+ return -ENOMEM;
+
+ /* Initialize all port interrupt end point to port 0 int endpoint.
+ * Our device has only one interrupt endpoint common to all ports.
+ */
+ port->interrupt_in_endpointAddress =
+ port->serial->port[0]->interrupt_in_endpointAddress;
+ mos7720_port->port = port;
+
+ usb_set_serial_port_data(port, mos7720_port);
+
+ return 0;
+}
+
+static int mos7720_port_remove(struct usb_serial_port *port)
+{
+ struct moschip_port *mos7720_port;
+
+ mos7720_port = usb_get_serial_port_data(port);
+ kfree(mos7720_port);
+
+ return 0;
}
static struct usb_serial_driver moschip7720_2port_driver = {
.probe = mos77xx_probe,
.attach = mos7720_startup,
.release = mos7720_release,
+ .port_probe = mos7720_port_probe,
+ .port_remove = mos7720_port_remove,
.ioctl = mos7720_ioctl,
.tiocmget = mos7720_tiocmget,
.tiocmset = mos7720_tiocmset,
int port_num; /*Actual port number in the device(1,2,etc) */
struct urb *write_urb; /* write URB for this port */
struct urb *read_urb; /* read URB for this port */
- struct urb *int_urb;
__u8 shadowLCR; /* last LCR value received */
__u8 shadowMCR; /* last MCR value received */
char open;
char open_ports;
- char zombie;
wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */
wait_queue_head_t delta_msr_wait; /* for handling sleeping while waiting for msr change to happen */
int delta_msr_cond;
struct moschip_port *mos7840_port;
struct device *dev = &urb->dev->dev;
__u8 regval = 0x0;
- int result = 0;
int status = urb->status;
mos7840_port = urb->context;
return;
default:
dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status);
- goto exit;
+ return;
}
dev_dbg(dev, "%s urb buffer size is %d\n", __func__, urb->actual_length);
mos7840_handle_new_msr(mos7840_port, regval);
else if (mos7840_port->MsrLsr == 1)
mos7840_handle_new_lsr(mos7840_port, regval);
-
-exit:
- spin_lock(&mos7840_port->pool_lock);
- if (!mos7840_port->zombie)
- result = usb_submit_urb(mos7840_port->int_urb, GFP_ATOMIC);
- spin_unlock(&mos7840_port->pool_lock);
- if (result) {
- dev_err(dev, "%s - Error %d submitting interrupt urb\n",
- __func__, result);
- }
}
static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
wreg = MODEM_STATUS_REGISTER;
break;
}
- spin_lock(&mos7840_port->pool_lock);
- if (!mos7840_port->zombie) {
- rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data);
- } else {
- spin_unlock(&mos7840_port->pool_lock);
- return;
- }
- spin_unlock(&mos7840_port->pool_lock);
+ rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data);
}
}
}
return mos7840_num_ports;
}
-/****************************************************************************
- * mos7840_startup
- ****************************************************************************/
-
-static int mos7840_startup(struct usb_serial *serial)
+static int mos7840_port_probe(struct usb_serial_port *port)
{
+ struct usb_serial *serial = port->serial;
struct moschip_port *mos7840_port;
- struct usb_device *dev;
- int i, status;
+ int status;
+ int pnum;
__u16 Data;
- dev = serial->dev;
-
/* we set up the pointers to the endpoints in the mos7840_open *
* function, as the structures aren't created yet. */
- /* set up port private structures */
- for (i = 0; i < serial->num_ports; ++i) {
- dev_dbg(&dev->dev, "mos7840_startup: configuring port %d............\n", i);
- mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
- if (mos7840_port == NULL) {
- dev_err(&dev->dev, "%s - Out of memory\n", __func__);
- status = -ENOMEM;
- i--; /* don't follow NULL pointer cleaning up */
- goto error;
- }
-
- /* Initialize all port interrupt end point to port 0 int
- * endpoint. Our device has only one interrupt end point
- * common to all port */
-
- mos7840_port->port = serial->port[i];
- mos7840_set_port_private(serial->port[i], mos7840_port);
- spin_lock_init(&mos7840_port->pool_lock);
-
- /* minor is not initialised until later by
- * usb-serial.c:get_free_serial() and cannot therefore be used
- * to index device instances */
- mos7840_port->port_num = i + 1;
- dev_dbg(&dev->dev, "serial->port[i]->number = %d\n", serial->port[i]->number);
- dev_dbg(&dev->dev, "serial->port[i]->serial->minor = %d\n", serial->port[i]->serial->minor);
- dev_dbg(&dev->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num);
- dev_dbg(&dev->dev, "serial->minor = %d\n", serial->minor);
-
- if (mos7840_port->port_num == 1) {
- mos7840_port->SpRegOffset = 0x0;
- mos7840_port->ControlRegOffset = 0x1;
- mos7840_port->DcrRegOffset = 0x4;
- } else if ((mos7840_port->port_num == 2)
- && (serial->num_ports == 4)) {
- mos7840_port->SpRegOffset = 0x8;
- mos7840_port->ControlRegOffset = 0x9;
- mos7840_port->DcrRegOffset = 0x16;
- } else if ((mos7840_port->port_num == 2)
- && (serial->num_ports == 2)) {
- mos7840_port->SpRegOffset = 0xa;
- mos7840_port->ControlRegOffset = 0xb;
- mos7840_port->DcrRegOffset = 0x19;
- } else if ((mos7840_port->port_num == 3)
- && (serial->num_ports == 4)) {
- mos7840_port->SpRegOffset = 0xa;
- mos7840_port->ControlRegOffset = 0xb;
- mos7840_port->DcrRegOffset = 0x19;
- } else if ((mos7840_port->port_num == 4)
- && (serial->num_ports == 4)) {
- mos7840_port->SpRegOffset = 0xc;
- mos7840_port->ControlRegOffset = 0xd;
- mos7840_port->DcrRegOffset = 0x1c;
- }
- mos7840_dump_serial_port(serial->port[i], mos7840_port);
- mos7840_set_port_private(serial->port[i], mos7840_port);
+ pnum = port->number - serial->minor;
- /* enable rx_disable bit in control register */
- status = mos7840_get_reg_sync(serial->port[i],
- mos7840_port->ControlRegOffset, &Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Reading ControlReg failed status-0x%x\n", status);
- break;
- } else
- dev_dbg(&dev->dev, "ControlReg Reading success val is %x, status%d\n", Data, status);
- Data |= 0x08; /* setting driver done bit */
- Data |= 0x04; /* sp1_bit to have cts change reflect in
- modem status reg */
-
- /* Data |= 0x20; //rx_disable bit */
- status = mos7840_set_reg_sync(serial->port[i],
- mos7840_port->ControlRegOffset, Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status);
- break;
- } else
- dev_dbg(&dev->dev, "ControlReg Writing success(rx_disable) status%d\n", status);
+ dev_dbg(&port->dev, "mos7840_startup: configuring port %d\n", pnum);
+ mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
+ if (mos7840_port == NULL) {
+ dev_err(&port->dev, "%s - Out of memory\n", __func__);
+ return -ENOMEM;
+ }
- /* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2
- and 0x24 in DCR3 */
- Data = 0x01;
- status = mos7840_set_reg_sync(serial->port[i],
- (__u16) (mos7840_port->DcrRegOffset + 0), Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing DCR0 failed status-0x%x\n", status);
- break;
- } else
- dev_dbg(&dev->dev, "DCR0 Writing success status%d\n", status);
+ /* Initialize all port interrupt end point to port 0 int
+ * endpoint. Our device has only one interrupt end point
+ * common to all port */
+
+ mos7840_port->port = port;
+ mos7840_set_port_private(port, mos7840_port);
+ spin_lock_init(&mos7840_port->pool_lock);
+
+ /* minor is not initialised until later by
+ * usb-serial.c:get_free_serial() and cannot therefore be used
+ * to index device instances */
+ mos7840_port->port_num = pnum + 1;
+ dev_dbg(&port->dev, "port->number = %d\n", port->number);
+ dev_dbg(&port->dev, "port->serial->minor = %d\n", port->serial->minor);
+ dev_dbg(&port->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num);
+ dev_dbg(&port->dev, "serial->minor = %d\n", serial->minor);
+
+ if (mos7840_port->port_num == 1) {
+ mos7840_port->SpRegOffset = 0x0;
+ mos7840_port->ControlRegOffset = 0x1;
+ mos7840_port->DcrRegOffset = 0x4;
+ } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 4)) {
+ mos7840_port->SpRegOffset = 0x8;
+ mos7840_port->ControlRegOffset = 0x9;
+ mos7840_port->DcrRegOffset = 0x16;
+ } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 2)) {
+ mos7840_port->SpRegOffset = 0xa;
+ mos7840_port->ControlRegOffset = 0xb;
+ mos7840_port->DcrRegOffset = 0x19;
+ } else if ((mos7840_port->port_num == 3) && (serial->num_ports == 4)) {
+ mos7840_port->SpRegOffset = 0xa;
+ mos7840_port->ControlRegOffset = 0xb;
+ mos7840_port->DcrRegOffset = 0x19;
+ } else if ((mos7840_port->port_num == 4) && (serial->num_ports == 4)) {
+ mos7840_port->SpRegOffset = 0xc;
+ mos7840_port->ControlRegOffset = 0xd;
+ mos7840_port->DcrRegOffset = 0x1c;
+ }
+ mos7840_dump_serial_port(port, mos7840_port);
+ mos7840_set_port_private(port, mos7840_port);
+
+ /* enable rx_disable bit in control register */
+ status = mos7840_get_reg_sync(port,
+ mos7840_port->ControlRegOffset, &Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Reading ControlReg failed status-0x%x\n", status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "ControlReg Reading success val is %x, status%d\n", Data, status);
+ Data |= 0x08; /* setting driver done bit */
+ Data |= 0x04; /* sp1_bit to have cts change reflect in
+ modem status reg */
- Data = 0x05;
- status = mos7840_set_reg_sync(serial->port[i],
- (__u16) (mos7840_port->DcrRegOffset + 1), Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing DCR1 failed status-0x%x\n", status);
- break;
- } else
- dev_dbg(&dev->dev, "DCR1 Writing success status%d\n", status);
+ /* Data |= 0x20; //rx_disable bit */
+ status = mos7840_set_reg_sync(port,
+ mos7840_port->ControlRegOffset, Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "ControlReg Writing success(rx_disable) status%d\n", status);
- Data = 0x24;
- status = mos7840_set_reg_sync(serial->port[i],
- (__u16) (mos7840_port->DcrRegOffset + 2), Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing DCR2 failed status-0x%x\n", status);
- break;
- } else
- dev_dbg(&dev->dev, "DCR2 Writing success status%d\n", status);
+ /* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2
+ and 0x24 in DCR3 */
+ Data = 0x01;
+ status = mos7840_set_reg_sync(port,
+ (__u16) (mos7840_port->DcrRegOffset + 0), Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing DCR0 failed status-0x%x\n", status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "DCR0 Writing success status%d\n", status);
- /* write values in clkstart0x0 and clkmulti 0x20 */
- Data = 0x0;
- status = mos7840_set_reg_sync(serial->port[i],
- CLK_START_VALUE_REGISTER, Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);
- break;
- } else
- dev_dbg(&dev->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status);
+ Data = 0x05;
+ status = mos7840_set_reg_sync(port,
+ (__u16) (mos7840_port->DcrRegOffset + 1), Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing DCR1 failed status-0x%x\n", status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "DCR1 Writing success status%d\n", status);
- Data = 0x20;
- status = mos7840_set_reg_sync(serial->port[i],
- CLK_MULTI_REGISTER, Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status);
- goto error;
- } else
- dev_dbg(&dev->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status);
+ Data = 0x24;
+ status = mos7840_set_reg_sync(port,
+ (__u16) (mos7840_port->DcrRegOffset + 2), Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing DCR2 failed status-0x%x\n", status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "DCR2 Writing success status%d\n", status);
- /* write value 0x0 to scratchpad register */
- Data = 0x00;
- status = mos7840_set_uart_reg(serial->port[i],
- SCRATCH_PAD_REGISTER, Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status);
- break;
- } else
- dev_dbg(&dev->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status);
+ /* write values in clkstart0x0 and clkmulti 0x20 */
+ Data = 0x0;
+ status = mos7840_set_reg_sync(port, CLK_START_VALUE_REGISTER, Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status);
- /* Zero Length flag register */
- if ((mos7840_port->port_num != 1)
- && (serial->num_ports == 2)) {
+ Data = 0x20;
+ status = mos7840_set_reg_sync(port, CLK_MULTI_REGISTER, Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status);
+ goto error;
+ } else
+ dev_dbg(&port->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status);
- Data = 0xff;
- status = mos7840_set_reg_sync(serial->port[i],
- (__u16) (ZLP_REG1 +
- ((__u16)mos7840_port->port_num)), Data);
- dev_dbg(&dev->dev, "ZLIP offset %x\n",
+ /* write value 0x0 to scratchpad register */
+ Data = 0x00;
+ status = mos7840_set_uart_reg(port, SCRATCH_PAD_REGISTER, Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status);
+
+ /* Zero Length flag register */
+ if ((mos7840_port->port_num != 1) && (serial->num_ports == 2)) {
+ Data = 0xff;
+ status = mos7840_set_reg_sync(port,
+ (__u16) (ZLP_REG1 +
+ ((__u16)mos7840_port->port_num)), Data);
+ dev_dbg(&port->dev, "ZLIP offset %x\n",
(__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num)));
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing ZLP_REG%d failed status-0x%x\n", i + 2, status);
- break;
- } else
- dev_dbg(&dev->dev, "ZLP_REG%d Writing success status%d\n", i + 2, status);
- } else {
- Data = 0xff;
- status = mos7840_set_reg_sync(serial->port[i],
- (__u16) (ZLP_REG1 +
- ((__u16)mos7840_port->port_num) - 0x1), Data);
- dev_dbg(&dev->dev, "ZLIP offset %x\n",
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 2, status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 2, status);
+ } else {
+ Data = 0xff;
+ status = mos7840_set_reg_sync(port,
+ (__u16) (ZLP_REG1 +
+ ((__u16)mos7840_port->port_num) - 0x1), Data);
+ dev_dbg(&port->dev, "ZLIP offset %x\n",
(__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num) - 0x1));
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing ZLP_REG%d failed status-0x%x\n", i + 1, status);
- break;
- } else
- dev_dbg(&dev->dev, "ZLP_REG%d Writing success status%d\n", i + 1, status);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 1, status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 1, status);
- }
- mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL);
- mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL);
- mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest),
- GFP_KERNEL);
- if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf ||
- !mos7840_port->dr) {
- status = -ENOMEM;
- goto error;
- }
+ }
+ mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL);
+ mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL);
+ mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest),
+ GFP_KERNEL);
+ if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf ||
+ !mos7840_port->dr) {
+ status = -ENOMEM;
+ goto error;
+ }
- mos7840_port->has_led = false;
+ mos7840_port->has_led = false;
- /* Initialize LED timers */
- if (device_type == MOSCHIP_DEVICE_ID_7810) {
- mos7840_port->has_led = true;
+ /* Initialize LED timers */
+ if (device_type == MOSCHIP_DEVICE_ID_7810) {
+ mos7840_port->has_led = true;
- init_timer(&mos7840_port->led_timer1);
- mos7840_port->led_timer1.function = mos7840_led_off;
- mos7840_port->led_timer1.expires =
- jiffies + msecs_to_jiffies(LED_ON_MS);
- mos7840_port->led_timer1.data =
- (unsigned long)mos7840_port;
+ init_timer(&mos7840_port->led_timer1);
+ mos7840_port->led_timer1.function = mos7840_led_off;
+ mos7840_port->led_timer1.expires =
+ jiffies + msecs_to_jiffies(LED_ON_MS);
+ mos7840_port->led_timer1.data = (unsigned long)mos7840_port;
- init_timer(&mos7840_port->led_timer2);
- mos7840_port->led_timer2.function =
- mos7840_led_flag_off;
- mos7840_port->led_timer2.expires =
- jiffies + msecs_to_jiffies(LED_OFF_MS);
- mos7840_port->led_timer2.data =
- (unsigned long)mos7840_port;
+ init_timer(&mos7840_port->led_timer2);
+ mos7840_port->led_timer2.function = mos7840_led_flag_off;
+ mos7840_port->led_timer2.expires =
+ jiffies + msecs_to_jiffies(LED_OFF_MS);
+ mos7840_port->led_timer2.data = (unsigned long)mos7840_port;
- mos7840_port->led_flag = false;
+ mos7840_port->led_flag = false;
- /* Turn off LED */
- mos7840_set_led_sync(serial->port[i],
- MODEM_CONTROL_REGISTER, 0x0300);
- }
+ /* Turn off LED */
+ mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300);
}
+out:
+ if (pnum == serial->num_ports - 1) {
+ /* Zero Length flag enable */
+ Data = 0x0f;
+ status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing ZLP_REG5 failed status-0x%x\n", status);
+ goto error;
+ } else
+ dev_dbg(&port->dev, "ZLP_REG5 Writing success status%d\n", status);
- /* Zero Length flag enable */
- Data = 0x0f;
- status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing ZLP_REG5 failed status-0x%x\n", status);
- goto error;
- } else
- dev_dbg(&dev->dev, "ZLP_REG5 Writing success status%d\n", status);
-
- /* setting configuration feature to one */
- usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- (__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, MOS_WDR_TIMEOUT);
+ /* setting configuration feature to one */
+ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+ 0x03, 0x00, 0x01, 0x00, NULL, 0x00,
+ MOS_WDR_TIMEOUT);
+ }
return 0;
error:
- for (/* nothing */; i >= 0; i--) {
- mos7840_port = mos7840_get_port_private(serial->port[i]);
+ kfree(mos7840_port->dr);
+ kfree(mos7840_port->ctrl_buf);
+ usb_free_urb(mos7840_port->control_urb);
+ kfree(mos7840_port);
- kfree(mos7840_port->dr);
- kfree(mos7840_port->ctrl_buf);
- usb_free_urb(mos7840_port->control_urb);
- kfree(mos7840_port);
- serial->port[i] = NULL;
- }
return status;
}
-/****************************************************************************
- * mos7840_disconnect
- * This function is called whenever the device is removed from the usb bus.
- ****************************************************************************/
-
-static void mos7840_disconnect(struct usb_serial *serial)
+static int mos7840_port_remove(struct usb_serial_port *port)
{
- int i;
- unsigned long flags;
struct moschip_port *mos7840_port;
- /* check for the ports to be closed,close the ports and disconnect */
+ mos7840_port = mos7840_get_port_private(port);
- /* free private structure allocated for serial port *
- * stop reads and writes on all ports */
+ if (mos7840_port->has_led) {
+ /* Turn off LED */
+ mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300);
- for (i = 0; i < serial->num_ports; ++i) {
- mos7840_port = mos7840_get_port_private(serial->port[i]);
- if (mos7840_port) {
- spin_lock_irqsave(&mos7840_port->pool_lock, flags);
- mos7840_port->zombie = 1;
- spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
- usb_kill_urb(mos7840_port->control_urb);
- }
+ del_timer_sync(&mos7840_port->led_timer1);
+ del_timer_sync(&mos7840_port->led_timer2);
}
-}
-
-/****************************************************************************
- * mos7840_release
- * This function is called when the usb_serial structure is freed.
- ****************************************************************************/
-
-static void mos7840_release(struct usb_serial *serial)
-{
- int i;
- struct moschip_port *mos7840_port;
-
- /* check for the ports to be closed,close the ports and disconnect */
+ usb_kill_urb(mos7840_port->control_urb);
+ usb_free_urb(mos7840_port->control_urb);
+ kfree(mos7840_port->ctrl_buf);
+ kfree(mos7840_port->dr);
+ kfree(mos7840_port);
- /* free private structure allocated for serial port *
- * stop reads and writes on all ports */
-
- for (i = 0; i < serial->num_ports; ++i) {
- mos7840_port = mos7840_get_port_private(serial->port[i]);
- if (mos7840_port) {
- if (mos7840_port->has_led) {
- /* Turn off LED */
- mos7840_set_led_sync(mos7840_port->port,
- MODEM_CONTROL_REGISTER, 0x0300);
-
- del_timer_sync(&mos7840_port->led_timer1);
- del_timer_sync(&mos7840_port->led_timer2);
- }
- kfree(mos7840_port->ctrl_buf);
- kfree(mos7840_port->dr);
- kfree(mos7840_port);
- }
- }
+ return 0;
}
static struct usb_serial_driver moschip7840_4port_device = {
.tiocmget = mos7840_tiocmget,
.tiocmset = mos7840_tiocmset,
.get_icount = mos7840_get_icount,
- .attach = mos7840_startup,
- .disconnect = mos7840_disconnect,
- .release = mos7840_release,
+ .port_probe = mos7840_port_probe,
+ .port_remove = mos7840_port_remove,
.read_bulk_callback = mos7840_bulk_in_callback,
.read_int_callback = mos7840_interrupt_callback,
};
const unsigned char *buf, int count);
static int omninet_write_room(struct tty_struct *tty);
static void omninet_disconnect(struct usb_serial *serial);
-static void omninet_release(struct usb_serial *serial);
-static int omninet_attach(struct usb_serial *serial);
+static int omninet_port_probe(struct usb_serial_port *port);
+static int omninet_port_remove(struct usb_serial_port *port);
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) },
.description = "ZyXEL - omni.net lcd plus usb",
.id_table = id_table,
.num_ports = 1,
- .attach = omninet_attach,
+ .port_probe = omninet_port_probe,
+ .port_remove = omninet_port_remove,
.open = omninet_open,
.close = omninet_close,
.write = omninet_write,
.read_bulk_callback = omninet_read_bulk_callback,
.write_bulk_callback = omninet_write_bulk_callback,
.disconnect = omninet_disconnect,
- .release = omninet_release,
};
static struct usb_serial_driver * const serial_drivers[] = {
__u8 od_outseq; /* Sequence number for bulk_out URBs */
};
-static int omninet_attach(struct usb_serial *serial)
+static int omninet_port_probe(struct usb_serial_port *port)
{
struct omninet_data *od;
- struct usb_serial_port *port = serial->port[0];
od = kmalloc(sizeof(struct omninet_data), GFP_KERNEL);
- if (!od) {
- dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n",
- __func__, sizeof(struct omninet_data));
+ if (!od)
return -ENOMEM;
- }
+
usb_set_serial_port_data(port, od);
+
+ return 0;
+}
+
+static int omninet_port_remove(struct usb_serial_port *port)
+{
+ struct omninet_data *od;
+
+ od = usb_get_serial_port_data(port);
+ kfree(od);
+
return 0;
}
usb_kill_urb(wport->write_urb);
}
-
-static void omninet_release(struct usb_serial *serial)
-{
- struct usb_serial_port *port = serial->port[0];
-
- kfree(usb_get_serial_port_data(port));
-}
-
module_usb_serial_driver(serial_drivers, id_table);
MODULE_AUTHOR(DRIVER_AUTHOR);
{
struct usb_serial *serial = port->serial;
int retval;
- u8 buffer[2];
+ u8 *buffer;
+
+ buffer = kzalloc(1, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
buffer[0] = val;
/* Send the message to the vendor control endpoint
requesttype,
USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
0, 0, buffer, 1, 0);
+ kfree(buffer);
return retval;
}
if (!dr) {
dev_err(&port->dev, "out of memory\n");
count = -ENOMEM;
- goto error;
+ goto error_no_dr;
}
dr->bRequestType = USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT;
return count;
error:
+ kfree(dr);
+error_no_dr:
usb_free_urb(urb);
error_no_urb:
kfree(buffer);
/* Function prototypes */
static int option_probe(struct usb_serial *serial,
const struct usb_device_id *id);
+static int option_attach(struct usb_serial *serial);
static void option_release(struct usb_serial *serial);
static int option_send_setup(struct usb_serial_port *port);
static void option_instat_callback(struct urb *urb);
.tiocmget = usb_wwan_tiocmget,
.tiocmset = usb_wwan_tiocmset,
.ioctl = usb_wwan_ioctl,
- .attach = usb_wwan_startup,
+ .attach = option_attach,
.release = option_release,
+ .port_probe = usb_wwan_port_probe,
.port_remove = usb_wwan_port_remove,
.read_int_callback = option_instat_callback,
#ifdef CONFIG_PM
static int option_probe(struct usb_serial *serial,
const struct usb_device_id *id)
{
- struct usb_wwan_intf_private *data;
- struct option_private *priv;
struct usb_interface_descriptor *iface_desc =
&serial->interface->cur_altsetting->desc;
struct usb_device_descriptor *dev_desc = &serial->dev->descriptor;
iface_desc->bInterfaceClass != USB_CLASS_CDC_DATA)
return -ENODEV;
+ /* Store device id so we can use it during attach. */
+ usb_set_serial_data(serial, (void *)id);
+
+ return 0;
+}
+
+static int option_attach(struct usb_serial *serial)
+{
+ struct usb_interface_descriptor *iface_desc;
+ const struct usb_device_id *id;
+ struct usb_wwan_intf_private *data;
+ struct option_private *priv;
+
data = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL);
if (!data)
return -ENOMEM;
return -ENOMEM;
}
+ /* Retrieve device id stored at probe. */
+ id = usb_get_serial_data(serial);
+ iface_desc = &serial->interface->cur_altsetting->desc;
+
priv->bInterfaceNumber = iface_desc->bInterfaceNumber;
data->private = priv;
static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
{
- struct usb_wwan_intf_private *data;
struct usb_host_interface *intf = serial->interface->cur_altsetting;
struct device *dev = &serial->dev->dev;
int retval = -ENODEV;
ifnum = intf->desc.bInterfaceNumber;
dev_dbg(dev, "This Interface = %d\n", ifnum);
- data = kzalloc(sizeof(struct usb_wwan_intf_private),
- GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- spin_lock_init(&data->susp_lock);
-
if (nintf == 1) {
/* QDL mode */
/* Gobi 2000 has a single altsetting, older ones have two */
}
}
- /* Set serial->private if not returning error */
- if (retval == 0)
- usb_set_serial_data(serial, data);
- else
- kfree(data);
-
return retval;
}
+static int qc_attach(struct usb_serial *serial)
+{
+ struct usb_wwan_intf_private *data;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ spin_lock_init(&data->susp_lock);
+
+ usb_set_serial_data(serial, data);
+
+ return 0;
+}
+
static void qc_release(struct usb_serial *serial)
{
struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
- /* Free the private data allocated in qcprobe */
usb_set_serial_data(serial, NULL);
kfree(priv);
}
.write = usb_wwan_write,
.write_room = usb_wwan_write_room,
.chars_in_buffer = usb_wwan_chars_in_buffer,
- .attach = usb_wwan_startup,
+ .attach = qc_attach,
.release = qc_release,
+ .port_probe = usb_wwan_port_probe,
.port_remove = usb_wwan_port_remove,
#ifdef CONFIG_PM
.suspend = usb_wwan_suspend,
static void qt2_release(struct usb_serial *serial)
{
- int i;
+ struct qt2_serial_private *serial_priv;
- kfree(usb_get_serial_data(serial));
+ serial_priv = usb_get_serial_data(serial);
- for (i = 0; i < serial->num_ports; i++)
- kfree(usb_get_serial_port_data(serial->port[i]));
+ usb_free_urb(serial_priv->read_urb);
+ kfree(serial_priv);
}
static inline int calc_baud_divisor(int baudrate)
port_priv->is_open = false;
spin_lock_irqsave(&port_priv->urb_lock, flags);
- if (port_priv->write_urb->status == -EINPROGRESS)
- usb_kill_urb(port_priv->write_urb);
+ usb_kill_urb(port_priv->write_urb);
port_priv->urb_in_use = false;
spin_unlock_irqrestore(&port_priv->urb_lock, flags);
+ mutex_lock(&port->serial->disc_mutex);
+ if (port->serial->disconnected) {
+ mutex_unlock(&port->serial->disc_mutex);
+ return;
+ }
+
/* flush the port transmit buffer */
i = usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev, 0),
dev_err(&port->dev, "%s - close port failed %i\n",
__func__, i);
+ mutex_unlock(&port->serial->disc_mutex);
}
static void qt2_disconnect(struct usb_serial *serial)
{
struct qt2_serial_private *serial_priv = usb_get_serial_data(serial);
- struct qt2_port_private *port_priv;
- int i;
-
- if (serial_priv->read_urb->status == -EINPROGRESS)
- usb_kill_urb(serial_priv->read_urb);
-
- usb_free_urb(serial_priv->read_urb);
- for (i = 0; i < serial->num_ports; i++) {
- port_priv = usb_get_serial_port_data(serial->port[i]);
-
- if (port_priv->write_urb->status == -EINPROGRESS)
- usb_kill_urb(port_priv->write_urb);
- usb_free_urb(port_priv->write_urb);
- }
+ usb_kill_urb(serial_priv->read_urb);
}
static int get_serial_info(struct usb_serial_port *port,
static int qt2_setup_urbs(struct usb_serial *serial)
{
- struct usb_serial_port *port;
struct usb_serial_port *port0;
struct qt2_serial_private *serial_priv;
- struct qt2_port_private *port_priv;
- int pcount, status;
+ int status;
port0 = serial->port[0];
sizeof(serial_priv->read_buffer),
qt2_read_bulk_callback, serial);
- /* setup write_urb for each port */
- for (pcount = 0; pcount < serial->num_ports; pcount++) {
-
- port = serial->port[pcount];
- port_priv = usb_get_serial_port_data(port);
-
- port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!port_priv->write_urb) {
- dev_err(&serial->dev->dev,
- "failed to alloc write_urb for port %i\n",
- pcount);
- return -ENOMEM;
- }
-
- usb_fill_bulk_urb(port_priv->write_urb,
- serial->dev,
- usb_sndbulkpipe(serial->dev,
- port0->
- bulk_out_endpointAddress),
- port_priv->write_buffer,
- sizeof(port_priv->write_buffer),
- qt2_write_bulk_callback, port);
- }
-
status = usb_submit_urb(serial_priv->read_urb, GFP_KERNEL);
if (status != 0) {
dev_err(&serial->dev->dev,
"%s - submit read urb failed %i\n", __func__, status);
+ usb_free_urb(serial_priv->read_urb);
return status;
}
return 0;
-
}
static int qt2_attach(struct usb_serial *serial)
{
struct qt2_serial_private *serial_priv;
- struct qt2_port_private *port_priv;
- int status, pcount;
+ int status;
/* power on unit */
status = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
usb_set_serial_data(serial, serial_priv);
- for (pcount = 0; pcount < serial->num_ports; pcount++) {
- port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
- if (!port_priv) {
- dev_err(&serial->dev->dev,
- "%s- kmalloc(%Zd) failed.\n", __func__,
- sizeof(*port_priv));
- pcount--;
- status = -ENOMEM;
- goto attach_failed;
- }
-
- spin_lock_init(&port_priv->lock);
- spin_lock_init(&port_priv->urb_lock);
- init_waitqueue_head(&port_priv->delta_msr_wait);
-
- port_priv->port = serial->port[pcount];
-
- usb_set_serial_port_data(serial->port[pcount], port_priv);
- }
-
status = qt2_setup_urbs(serial);
if (status != 0)
goto attach_failed;
return 0;
attach_failed:
- for (/* empty */; pcount >= 0; pcount--) {
- port_priv = usb_get_serial_port_data(serial->port[pcount]);
- kfree(port_priv);
- }
kfree(serial_priv);
return status;
}
+static int qt2_port_probe(struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
+ struct qt2_port_private *port_priv;
+ u8 bEndpointAddress;
+
+ port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
+ if (!port_priv)
+ return -ENOMEM;
+
+ spin_lock_init(&port_priv->lock);
+ spin_lock_init(&port_priv->urb_lock);
+ init_waitqueue_head(&port_priv->delta_msr_wait);
+ port_priv->port = port;
+
+ port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!port_priv->write_urb) {
+ kfree(port_priv);
+ return -ENOMEM;
+ }
+ bEndpointAddress = serial->port[0]->bulk_out_endpointAddress;
+ usb_fill_bulk_urb(port_priv->write_urb, serial->dev,
+ usb_sndbulkpipe(serial->dev, bEndpointAddress),
+ port_priv->write_buffer,
+ sizeof(port_priv->write_buffer),
+ qt2_write_bulk_callback, port);
+
+ usb_set_serial_port_data(port, port_priv);
+
+ return 0;
+}
+
+static int qt2_port_remove(struct usb_serial_port *port)
+{
+ struct qt2_port_private *port_priv;
+
+ port_priv = usb_get_serial_port_data(port);
+ usb_free_urb(port_priv->write_urb);
+ kfree(port_priv);
+
+ return 0;
+}
+
static int qt2_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
.attach = qt2_attach,
.release = qt2_release,
.disconnect = qt2_disconnect,
+ .port_probe = qt2_port_probe,
+ .port_remove = qt2_port_remove,
.dtr_rts = qt2_dtr_rts,
.break_ctl = qt2_break_ctl,
.tiocmget = qt2_tiocmget,
{
int result = 0;
struct usb_device *udev;
- struct sierra_intf_private *data;
u8 ifnum;
udev = serial->dev;
return -ENODEV;
}
- data = serial->private = kzalloc(sizeof(struct sierra_intf_private), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
- spin_lock_init(&data->susp_lock);
-
return result;
}
static int sierra_startup(struct usb_serial *serial)
{
- struct usb_serial_port *port;
- struct sierra_port_private *portdata;
- struct sierra_iface_info *himemoryp = NULL;
- int i;
- u8 ifnum;
+ struct sierra_intf_private *intfdata;
+
+ intfdata = kzalloc(sizeof(*intfdata), GFP_KERNEL);
+ if (!intfdata)
+ return -ENOMEM;
+
+ spin_lock_init(&intfdata->susp_lock);
+
+ usb_set_serial_data(serial, intfdata);
/* Set Device mode to D0 */
sierra_set_power_state(serial->dev, 0x0000);
if (nmea)
sierra_vsc_set_nmea(serial->dev, 1);
- /* Now setup per port private data */
- for (i = 0; i < serial->num_ports; i++) {
- port = serial->port[i];
- portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
- if (!portdata) {
- dev_dbg(&port->dev, "%s: kmalloc for "
- "sierra_port_private (%d) failed!\n",
- __func__, i);
- return -ENOMEM;
- }
- spin_lock_init(&portdata->lock);
- init_usb_anchor(&portdata->active);
- init_usb_anchor(&portdata->delayed);
- ifnum = i;
- /* Assume low memory requirements */
- portdata->num_out_urbs = N_OUT_URB;
- portdata->num_in_urbs = N_IN_URB;
-
- /* Determine actual memory requirements */
- if (serial->num_ports == 1) {
- /* Get interface number for composite device */
- ifnum = sierra_calc_interface(serial);
- himemoryp =
- (struct sierra_iface_info *)&typeB_interface_list;
- if (is_himemory(ifnum, himemoryp)) {
- portdata->num_out_urbs = N_OUT_URB_HM;
- portdata->num_in_urbs = N_IN_URB_HM;
- }
- }
- else {
- himemoryp =
- (struct sierra_iface_info *)&typeA_interface_list;
- if (is_himemory(i, himemoryp)) {
- portdata->num_out_urbs = N_OUT_URB_HM;
- portdata->num_in_urbs = N_IN_URB_HM;
- }
- }
- dev_dbg(&serial->dev->dev,
- "Memory usage (urbs) interface #%d, in=%d, out=%d\n",
- ifnum,portdata->num_in_urbs, portdata->num_out_urbs );
- /* Set the port private data pointer */
- usb_set_serial_port_data(port, portdata);
- }
-
return 0;
}
static void sierra_release(struct usb_serial *serial)
{
- int i;
- struct usb_serial_port *port;
+ struct sierra_intf_private *intfdata;
+
+ intfdata = usb_get_serial_data(serial);
+ kfree(intfdata);
+}
+
+static int sierra_port_probe(struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
struct sierra_port_private *portdata;
+ const struct sierra_iface_info *himemoryp;
+ u8 ifnum;
- for (i = 0; i < serial->num_ports; ++i) {
- port = serial->port[i];
- if (!port)
- continue;
- portdata = usb_get_serial_port_data(port);
- if (!portdata)
- continue;
- kfree(portdata);
+ portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
+ if (!portdata)
+ return -ENOMEM;
+
+ spin_lock_init(&portdata->lock);
+ init_usb_anchor(&portdata->active);
+ init_usb_anchor(&portdata->delayed);
+
+ /* Assume low memory requirements */
+ portdata->num_out_urbs = N_OUT_URB;
+ portdata->num_in_urbs = N_IN_URB;
+
+ /* Determine actual memory requirements */
+ if (serial->num_ports == 1) {
+ /* Get interface number for composite device */
+ ifnum = sierra_calc_interface(serial);
+ himemoryp = &typeB_interface_list;
+ } else {
+ /* This is really the usb-serial port number of the interface
+ * rather than the interface number.
+ */
+ ifnum = port->number - serial->minor;
+ himemoryp = &typeA_interface_list;
}
+
+ if (is_himemory(ifnum, himemoryp)) {
+ portdata->num_out_urbs = N_OUT_URB_HM;
+ portdata->num_in_urbs = N_IN_URB_HM;
+ }
+
+ dev_dbg(&port->dev,
+ "Memory usage (urbs) interface #%d, in=%d, out=%d\n",
+ ifnum, portdata->num_in_urbs, portdata->num_out_urbs);
+
+ usb_set_serial_port_data(port, portdata);
+
+ return 0;
+}
+
+static int sierra_port_remove(struct usb_serial_port *port)
+{
+ struct sierra_port_private *portdata;
+
+ portdata = usb_get_serial_port_data(port);
+ kfree(portdata);
+
+ return 0;
}
#ifdef CONFIG_PM
.tiocmset = sierra_tiocmset,
.attach = sierra_startup,
.release = sierra_release,
+ .port_probe = sierra_port_probe,
+ .port_remove = sierra_port_remove,
.suspend = sierra_suspend,
.resume = sierra_resume,
.read_int_callback = sierra_instat_callback,
extern void usb_wwan_dtr_rts(struct usb_serial_port *port, int on);
extern int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port);
extern void usb_wwan_close(struct usb_serial_port *port);
-extern int usb_wwan_startup(struct usb_serial *serial);
+extern int usb_wwan_port_probe(struct usb_serial_port *port);
extern int usb_wwan_port_remove(struct usb_serial_port *port);
extern int usb_wwan_write_room(struct tty_struct *tty);
extern void usb_wwan_set_termios(struct tty_struct *tty,
EXPORT_SYMBOL(usb_wwan_close);
/* Helper functions used by usb_wwan_setup_urbs */
-static struct urb *usb_wwan_setup_urb(struct usb_serial *serial, int endpoint,
+static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port,
+ int endpoint,
int dir, void *ctx, char *buf, int len,
void (*callback) (struct urb *))
{
+ struct usb_serial *serial = port->serial;
struct urb *urb;
if (endpoint == -1)
return urb;
}
-/* Setup urbs */
-static void usb_wwan_setup_urbs(struct usb_serial *serial)
+int usb_wwan_port_probe(struct usb_serial_port *port)
{
- int i, j;
- struct usb_serial_port *port;
struct usb_wwan_port_private *portdata;
+ struct urb *urb;
+ u8 *buffer;
+ int err;
+ int i;
- for (i = 0; i < serial->num_ports; i++) {
- port = serial->port[i];
- portdata = usb_get_serial_port_data(port);
+ portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
+ if (!portdata)
+ return -ENOMEM;
- /* Do indat endpoints first */
- for (j = 0; j < N_IN_URB; ++j) {
- portdata->in_urbs[j] = usb_wwan_setup_urb(serial,
- port->
- bulk_in_endpointAddress,
- USB_DIR_IN,
- port,
- portdata->
- in_buffer[j],
- IN_BUFLEN,
- usb_wwan_indat_callback);
- }
+ init_usb_anchor(&portdata->delayed);
- /* outdat endpoints */
- for (j = 0; j < N_OUT_URB; ++j) {
- portdata->out_urbs[j] = usb_wwan_setup_urb(serial,
- port->
- bulk_out_endpointAddress,
- USB_DIR_OUT,
- port,
- portdata->
- out_buffer
- [j],
- OUT_BUFLEN,
- usb_wwan_outdat_callback);
- }
+ for (i = 0; i < N_IN_URB; i++) {
+ buffer = (u8 *)__get_free_page(GFP_KERNEL);
+ if (!buffer)
+ goto bail_out_error;
+ portdata->in_buffer[i] = buffer;
+
+ urb = usb_wwan_setup_urb(port, port->bulk_in_endpointAddress,
+ USB_DIR_IN, port,
+ buffer, IN_BUFLEN,
+ usb_wwan_indat_callback);
+ portdata->in_urbs[i] = urb;
}
-}
-
-int usb_wwan_startup(struct usb_serial *serial)
-{
- int i, j, err;
- struct usb_serial_port *port;
- struct usb_wwan_port_private *portdata;
- u8 *buffer;
- /* Now setup per port private data */
- for (i = 0; i < serial->num_ports; i++) {
- port = serial->port[i];
- portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
- if (!portdata) {
- dev_dbg(&port->dev, "%s: kmalloc for usb_wwan_port_private (%d) failed!.\n",
- __func__, i);
- return 1;
- }
- init_usb_anchor(&portdata->delayed);
+ for (i = 0; i < N_OUT_URB; i++) {
+ if (port->bulk_out_endpointAddress == -1)
+ continue;
- for (j = 0; j < N_IN_URB; j++) {
- buffer = (u8 *) __get_free_page(GFP_KERNEL);
- if (!buffer)
- goto bail_out_error;
- portdata->in_buffer[j] = buffer;
- }
+ buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
+ if (!buffer)
+ goto bail_out_error2;
+ portdata->out_buffer[i] = buffer;
- for (j = 0; j < N_OUT_URB; j++) {
- buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
- if (!buffer)
- goto bail_out_error2;
- portdata->out_buffer[j] = buffer;
- }
+ urb = usb_wwan_setup_urb(port, port->bulk_out_endpointAddress,
+ USB_DIR_OUT, port,
+ buffer, OUT_BUFLEN,
+ usb_wwan_outdat_callback);
+ portdata->out_urbs[i] = urb;
+ }
- usb_set_serial_port_data(port, portdata);
+ usb_set_serial_port_data(port, portdata);
- if (!port->interrupt_in_urb)
- continue;
+ if (port->interrupt_in_urb) {
err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (err)
dev_dbg(&port->dev, "%s: submit irq_in urb failed %d\n",
__func__, err);
}
- usb_wwan_setup_urbs(serial);
+
return 0;
bail_out_error2:
- for (j = 0; j < N_OUT_URB; j++)
- kfree(portdata->out_buffer[j]);
+ for (i = 0; i < N_OUT_URB; i++) {
+ usb_free_urb(portdata->out_urbs[i]);
+ kfree(portdata->out_buffer[i]);
+ }
bail_out_error:
- for (j = 0; j < N_IN_URB; j++)
- if (portdata->in_buffer[j])
- free_page((unsigned long)portdata->in_buffer[j]);
+ for (i = 0; i < N_IN_URB; i++) {
+ usb_free_urb(portdata->in_urbs[i]);
+ free_page((unsigned long)portdata->in_buffer[i]);
+ }
kfree(portdata);
- return 1;
+
+ return -ENOMEM;
}
-EXPORT_SYMBOL(usb_wwan_startup);
+EXPORT_SYMBOL_GPL(usb_wwan_port_probe);
int usb_wwan_port_remove(struct usb_serial_port *port)
{
/* function prototypes for the Connect Tech WhiteHEAT serial converter */
static int whiteheat_attach(struct usb_serial *serial);
static void whiteheat_release(struct usb_serial *serial);
+static int whiteheat_port_probe(struct usb_serial_port *port);
+static int whiteheat_port_remove(struct usb_serial_port *port);
static int whiteheat_open(struct tty_struct *tty,
struct usb_serial_port *port);
static void whiteheat_close(struct usb_serial_port *port);
.num_ports = 4,
.attach = whiteheat_attach,
.release = whiteheat_release,
+ .port_probe = whiteheat_port_probe,
+ .port_remove = whiteheat_port_remove,
.open = whiteheat_open,
.close = whiteheat_close,
.ioctl = whiteheat_ioctl,
{
struct usb_serial_port *command_port;
struct whiteheat_command_private *command_info;
- struct usb_serial_port *port;
- struct whiteheat_private *info;
struct whiteheat_hw_info *hw_info;
int pipe;
int ret;
int alen;
__u8 *command;
__u8 *result;
- int i;
command_port = serial->port[COMMAND_PORT];
serial->type->description,
hw_info->sw_major_rev, hw_info->sw_minor_rev);
- for (i = 0; i < serial->num_ports; i++) {
- port = serial->port[i];
-
- info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL);
- if (info == NULL) {
- dev_err(&port->dev,
- "%s: Out of memory for port structures\n",
- serial->type->description);
- goto no_private;
- }
-
- info->mcr = 0;
-
- usb_set_serial_port_data(port, info);
- }
-
command_info = kmalloc(sizeof(struct whiteheat_command_private),
GFP_KERNEL);
if (command_info == NULL) {
"%s: please contact support@connecttech.com\n",
serial->type->description);
kfree(result);
+ kfree(command);
return -ENODEV;
no_command_private:
- for (i = serial->num_ports - 1; i >= 0; i--) {
- port = serial->port[i];
- info = usb_get_serial_port_data(port);
- kfree(info);
-no_private:
- ;
- }
kfree(result);
no_result_buffer:
kfree(command);
return -ENOMEM;
}
-
static void whiteheat_release(struct usb_serial *serial)
{
struct usb_serial_port *command_port;
- struct whiteheat_private *info;
- int i;
/* free up our private data for our command port */
command_port = serial->port[COMMAND_PORT];
kfree(usb_get_serial_port_data(command_port));
+}
- for (i = 0; i < serial->num_ports; i++) {
- info = usb_get_serial_port_data(serial->port[i]);
- kfree(info);
- }
+static int whiteheat_port_probe(struct usb_serial_port *port)
+{
+ struct whiteheat_private *info;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ usb_set_serial_port_data(port, info);
+
+ return 0;
+}
+
+static int whiteheat_port_remove(struct usb_serial_port *port)
+{
+ struct whiteheat_private *info;
+
+ info = usb_get_serial_port_data(port);
+ kfree(info);
+
+ return 0;
}
static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port)
USB_SC_8070, USB_PR_CB, NULL,
US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ),
+/* Submitted by Oleksandr Chumachenko <ledest@gmail.com> */
+UNUSUAL_DEV( 0x07cf, 0x1167, 0x0100, 0x0100,
+ "Casio",
+ "EX-N1 DigitalCamera",
+ USB_SC_8070, USB_PR_DEVICE, NULL, 0),
+
/* Submitted by Hartmut Wahl <hwahl@hwahl.de>*/
UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001,
"Samsung",
.hdr.gso_type = VIRTIO_NET_HDR_GSO_NONE
};
size_t total_len = 0;
- int err, headcount, mergeable;
+ int err, mergeable;
+ s16 headcount;
size_t vhost_hlen, sock_hlen;
size_t vhost_len, sock_len;
/* TODO: check that we are running from vhost_worker? */
The LTV350QV panel is present on all ATSTK1000 boards.
config LCD_ILI9320
- tristate
+ tristate "ILI Technology ILI9320 controller support"
+ depends on SPI
help
If you have a panel based on the ILI9320 controller chip
then say y to include a power driver for it.
config XEN_BALLOON
bool "Xen memory balloon driver"
+ depends on !ARM
default y
help
The balloon driver allows the Xen domain to request more memory from
config XEN_TMEM
bool
+ depends on !ARM
default y if (CLEANCACHE || FRONTSWAP)
help
Shim to interface in-kernel Transcendent Memory hooks
#include <asm/pgalloc.h>
#include <asm/pgtable.h>
#include <asm/tlb.h>
-#include <asm/e820.h>
#include <asm/xen/hypervisor.h>
#include <asm/xen/hypercall.h>
EXPORT_SYMBOL_GPL(balloon_stats);
/* We increase/decrease in batches which fit in a page */
-static unsigned long frame_list[PAGE_SIZE / sizeof(unsigned long)];
+static xen_pfn_t frame_list[PAGE_SIZE / sizeof(unsigned long)];
#ifdef CONFIG_HIGHMEM
#define inc_totalhigh_pages() (totalhigh_pages++)
static int xen_dbgp_op(struct usb_hcd *hcd, int op)
{
+#ifdef CONFIG_PCI
const struct device *ctrlr = hcd_to_bus(hcd)->controller;
+#endif
struct physdev_dbgp_op dbgp;
if (!xen_initial_domain())
#define PIRQ_SHAREABLE (1 << 1)
static int *evtchn_to_irq;
+#ifdef CONFIG_X86
static unsigned long *pirq_eoi_map;
+#endif
static bool (*pirq_needs_eoi)(unsigned irq);
static DEFINE_PER_CPU(unsigned long [NR_EVENT_CHANNELS/BITS_PER_LONG],
return ret;
}
+#ifdef CONFIG_X86
static bool pirq_check_eoi_map(unsigned irq)
{
return test_bit(pirq_from_irq(irq), pirq_eoi_map);
}
+#endif
static bool pirq_needs_eoi_flag(unsigned irq)
{
* nr_gframes is the number of frames to map grant table. Returning
* GNTST_okay means success and negative value means failure.
*/
- int (*map_frames)(unsigned long *frames, unsigned int nr_gframes);
+ int (*map_frames)(xen_pfn_t *frames, unsigned int nr_gframes);
/*
* Release a list of frames which are mapped in map_frames for grant
* entry status.
return (nr_grant_frames * GREFS_PER_GRANT_FRAME + SPP - 1) / SPP;
}
-static int gnttab_map_frames_v1(unsigned long *frames, unsigned int nr_gframes)
+static int gnttab_map_frames_v1(xen_pfn_t *frames, unsigned int nr_gframes)
{
int rc;
arch_gnttab_unmap(gnttab_shared.addr, nr_grant_frames);
}
-static int gnttab_map_frames_v2(unsigned long *frames, unsigned int nr_gframes)
+static int gnttab_map_frames_v2(xen_pfn_t *frames, unsigned int nr_gframes)
{
uint64_t *sframes;
unsigned int nr_sframes;
static int gnttab_map(unsigned int start_idx, unsigned int end_idx)
{
struct gnttab_setup_table setup;
- unsigned long *frames;
+ xen_pfn_t *frames;
unsigned int nr_gframes = end_idx + 1;
int rc;
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/kobject.h>
+#include <linux/err.h>
#include <asm/xen/hypervisor.h>
#include <asm/xen/hypercall.h>
ret = HYPERVISOR_xen_version(XENVER_platform_parameters,
parms);
if (!ret)
- ret = sprintf(buffer, "%lx\n", parms->virt_start);
+ ret = sprintf(buffer, "%"PRI_xen_ulong"\n",
+ parms->virt_start);
kfree(parms);
}
mutex_lock(&vpci_dev->lock);
- /* Keep multi-function devices together on the virtual PCI bus */
- for (slot = 0; slot < PCI_SLOT_MAX; slot++) {
- if (!list_empty(&vpci_dev->dev_list[slot])) {
+ /*
+ * Keep multi-function devices together on the virtual PCI bus, except
+ * virtual functions.
+ */
+ if (!dev->is_virtfn) {
+ for (slot = 0; slot < PCI_SLOT_MAX; slot++) {
+ if (list_empty(&vpci_dev->dev_list[slot]))
+ continue;
+
t = list_entry(list_first(&vpci_dev->dev_list[slot]),
struct pci_dev_entry, list);
pci_name(dev), slot);
list_add_tail(&dev_entry->list,
&vpci_dev->dev_list[slot]);
- func = PCI_FUNC(dev->devfn);
+ func = dev->is_virtfn ? 0 : PCI_FUNC(dev->devfn);
goto unlock;
}
}
*/
static bool xen_strict_xenbus_quirk(void)
{
+#ifdef CONFIG_X86
uint32_t eax, ebx, ecx, edx, base;
base = xen_cpuid_base();
if ((eax >> 16) < 4)
return true;
+#endif
return false;
}
return ret;
}
+static ssize_t blkdev_splice_read(struct file *file, loff_t *ppos,
+ struct pipe_inode_info *pipe, size_t len,
+ unsigned int flags)
+{
+ ssize_t ret;
+ struct block_device *bdev = I_BDEV(file->f_mapping->host);
+
+ percpu_down_read(&bdev->bd_block_size_semaphore);
+
+ ret = generic_file_splice_read(file, ppos, pipe, len, flags);
+
+ percpu_up_read(&bdev->bd_block_size_semaphore);
+
+ return ret;
+}
+
+static ssize_t blkdev_splice_write(struct pipe_inode_info *pipe,
+ struct file *file, loff_t *ppos, size_t len,
+ unsigned int flags)
+{
+ ssize_t ret;
+ struct block_device *bdev = I_BDEV(file->f_mapping->host);
+
+ percpu_down_read(&bdev->bd_block_size_semaphore);
+
+ ret = generic_file_splice_write(pipe, file, ppos, len, flags);
+
+ percpu_up_read(&bdev->bd_block_size_semaphore);
+
+ return ret;
+}
+
+
/*
* Try to release a page associated with block device when the system
* is under memory pressure.
#ifdef CONFIG_COMPAT
.compat_ioctl = compat_blkdev_ioctl,
#endif
- .splice_read = generic_file_splice_read,
- .splice_write = generic_file_splice_write,
+ .splice_read = blkdev_splice_read,
+ .splice_write = blkdev_splice_write,
};
int ioctl_by_bdev(struct block_device *bdev, unsigned cmd, unsigned long arg)
goto out;
}
- rcu_read_lock();
- root_level = btrfs_header_level(root->node);
- rcu_read_unlock();
+ root_level = btrfs_old_root_level(root, time_seq);
if (root_level + 1 == level)
goto out;
return ret;
}
-static char *ref_to_path(struct btrfs_root *fs_root,
- struct btrfs_path *path,
- u32 name_len, unsigned long name_off,
- struct extent_buffer *eb_in, u64 parent,
- char *dest, u32 size)
+char *btrfs_ref_to_path(struct btrfs_root *fs_root, struct btrfs_path *path,
+ u32 name_len, unsigned long name_off,
+ struct extent_buffer *eb_in, u64 parent,
+ char *dest, u32 size)
{
int slot;
u64 next_inum;
int ret;
- s64 bytes_left = size - 1;
+ s64 bytes_left = ((s64)size) - 1;
struct extent_buffer *eb = eb_in;
struct btrfs_key found_key;
int leave_spinning = path->leave_spinning;
struct extent_buffer *eb_in, u64 parent,
char *dest, u32 size)
{
- return ref_to_path(fs_root, path,
- btrfs_inode_ref_name_len(eb_in, iref),
- (unsigned long)(iref + 1),
- eb_in, parent, dest, size);
+ return btrfs_ref_to_path(fs_root, path,
+ btrfs_inode_ref_name_len(eb_in, iref),
+ (unsigned long)(iref + 1),
+ eb_in, parent, dest, size);
}
/*
ipath->fspath->bytes_left - s_ptr : 0;
fspath_min = (char *)ipath->fspath->val + (i + 1) * s_ptr;
- fspath = ref_to_path(ipath->fs_root, ipath->btrfs_path, name_len,
- name_off, eb, inum, fspath_min,
- bytes_left);
+ fspath = btrfs_ref_to_path(ipath->fs_root, ipath->btrfs_path, name_len,
+ name_off, eb, inum, fspath_min, bytes_left);
if (IS_ERR(fspath))
return PTR_ERR(fspath);
char *btrfs_iref_to_path(struct btrfs_root *fs_root, struct btrfs_path *path,
struct btrfs_inode_ref *iref, struct extent_buffer *eb,
u64 parent, char *dest, u32 size);
+char *btrfs_ref_to_path(struct btrfs_root *fs_root, struct btrfs_path *path,
+ u32 name_len, unsigned long name_off,
+ struct extent_buffer *eb_in, u64 parent,
+ char *dest, u32 size);
struct btrfs_data_container *init_data_container(u32 total_bytes);
struct inode_fs_paths *init_ipath(s32 total_bytes, struct btrfs_root *fs_root,
if (tree_mod_dont_log(fs_info, eb))
return 0;
+ /*
+ * When we override something during the move, we log these removals.
+ * This can only happen when we move towards the beginning of the
+ * buffer, i.e. dst_slot < src_slot.
+ */
for (i = 0; i + dst_slot < src_slot && i < nr_items; i++) {
ret = tree_mod_log_insert_key_locked(fs_info, eb, i + dst_slot,
MOD_LOG_KEY_REMOVE_WHILE_MOVING);
if (tree_mod_dont_log(fs_info, NULL))
return 0;
- __tree_mod_log_free_eb(fs_info, old_root);
-
ret = tree_mod_alloc(fs_info, flags, &tm);
if (ret < 0)
goto out;
ret = btrfs_dec_ref(trans, root, buf, 1, 1);
BUG_ON(ret); /* -ENOMEM */
}
- /*
- * don't log freeing in case we're freeing the root node, this
- * is done by tree_mod_log_set_root_pointer later
- */
- if (buf != root->node && btrfs_header_level(buf) != 0)
- tree_mod_log_free_eb(root->fs_info, buf);
+ tree_mod_log_free_eb(root->fs_info, buf);
clean_tree_block(trans, root, buf);
*last_ref = 1;
}
free_extent_buffer(eb);
__tree_mod_log_rewind(eb_rewin, time_seq, tm);
+ WARN_ON(btrfs_header_nritems(eb_rewin) >
+ BTRFS_NODEPTRS_PER_BLOCK(fs_info->fs_root));
return eb_rewin;
}
{
struct tree_mod_elem *tm;
struct extent_buffer *eb;
+ struct extent_buffer *old;
struct tree_mod_root *old_root = NULL;
u64 old_generation = 0;
u64 logical;
+ u32 blocksize;
eb = btrfs_read_lock_root_node(root);
tm = __tree_mod_log_oldest_root(root->fs_info, root, time_seq);
}
tm = tree_mod_log_search(root->fs_info, logical, time_seq);
- if (old_root)
+ if (old_root && tm && tm->op != MOD_LOG_KEY_REMOVE_WHILE_FREEING) {
+ btrfs_tree_read_unlock(root->node);
+ free_extent_buffer(root->node);
+ blocksize = btrfs_level_size(root, old_root->level);
+ old = read_tree_block(root, logical, blocksize, 0);
+ if (!old) {
+ pr_warn("btrfs: failed to read tree block %llu from get_old_root\n",
+ logical);
+ WARN_ON(1);
+ } else {
+ eb = btrfs_clone_extent_buffer(old);
+ free_extent_buffer(old);
+ }
+ } else if (old_root) {
+ btrfs_tree_read_unlock(root->node);
+ free_extent_buffer(root->node);
eb = alloc_dummy_extent_buffer(logical, root->nodesize);
- else
+ } else {
eb = btrfs_clone_extent_buffer(root->node);
- btrfs_tree_read_unlock(root->node);
- free_extent_buffer(root->node);
+ btrfs_tree_read_unlock(root->node);
+ free_extent_buffer(root->node);
+ }
+
if (!eb)
return NULL;
+ extent_buffer_get(eb);
btrfs_tree_read_lock(eb);
if (old_root) {
btrfs_set_header_bytenr(eb, eb->start);
__tree_mod_log_rewind(eb, time_seq, tm);
else
WARN_ON(btrfs_header_level(eb) != 0);
- extent_buffer_get(eb);
+ WARN_ON(btrfs_header_nritems(eb) > BTRFS_NODEPTRS_PER_BLOCK(root));
return eb;
}
+int btrfs_old_root_level(struct btrfs_root *root, u64 time_seq)
+{
+ struct tree_mod_elem *tm;
+ int level;
+
+ tm = __tree_mod_log_oldest_root(root->fs_info, root, time_seq);
+ if (tm && tm->op == MOD_LOG_ROOT_REPLACE) {
+ level = tm->old_root.level;
+ } else {
+ rcu_read_lock();
+ level = btrfs_header_level(root->node);
+ rcu_read_unlock();
+ }
+
+ return level;
+}
+
static inline int should_cow_block(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct extent_buffer *buf)
goto enospc;
}
+ tree_mod_log_free_eb(root->fs_info, root->node);
tree_mod_log_set_root_pointer(root, child);
rcu_assign_pointer(root->node, child);
push_items * sizeof(struct btrfs_key_ptr));
if (push_items < src_nritems) {
- tree_mod_log_eb_move(root->fs_info, src, 0, push_items,
- src_nritems - push_items);
+ /*
+ * don't call tree_mod_log_eb_move here, key removal was already
+ * fully logged by tree_mod_log_eb_copy above.
+ */
memmove_extent_buffer(src, btrfs_node_key_ptr_offset(0),
btrfs_node_key_ptr_offset(push_items),
(src_nritems - push_items) *
{
return atomic_inc_return(&fs_info->tree_mod_seq);
}
+int btrfs_old_root_level(struct btrfs_root *root, u64 time_seq);
/* root-item.c */
int btrfs_find_root_ref(struct btrfs_root *tree_root,
int btrfs_update_inode(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct inode *inode);
+int btrfs_update_inode_fallback(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root, struct inode *inode);
int btrfs_orphan_add(struct btrfs_trans_handle *trans, struct inode *inode);
int btrfs_orphan_del(struct btrfs_trans_handle *trans, struct inode *inode);
int btrfs_orphan_cleanup(struct btrfs_root *root);
return eb;
err:
- for (i--; i >= 0; i--)
- __free_page(eb->pages[i]);
+ for (; i > 0; i--)
+ __free_page(eb->pages[i - 1]);
__free_extent_buffer(eb);
return NULL;
}
struct page *locked_page,
u64 start, u64 end, int *page_started,
unsigned long *nr_written, int unlock);
-static noinline int btrfs_update_inode_fallback(struct btrfs_trans_handle *trans,
- struct btrfs_root *root, struct inode *inode);
static int btrfs_init_inode_security(struct btrfs_trans_handle *trans,
struct inode *inode, struct inode *dir,
return btrfs_update_inode_item(trans, root, inode);
}
-static noinline int btrfs_update_inode_fallback(struct btrfs_trans_handle *trans,
- struct btrfs_root *root, struct inode *inode)
+noinline int btrfs_update_inode_fallback(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct inode *inode)
{
int ret;
return -EOPNOTSUPP;
if (copy_from_user(&range, arg, sizeof(range)))
return -EFAULT;
- if (range.start > total_bytes)
+ if (range.start > total_bytes ||
+ range.len < fs_info->sb->s_blocksize)
return -EINVAL;
range.len = min(range.len, total_bytes - range.start);
ret = btrfs_commit_transaction(trans,
root->fs_info->extent_root);
}
- BUG_ON(ret);
+ if (ret)
+ goto fail;
ret = pending_snapshot->error;
if (ret)
}
path = btrfs_alloc_path();
- if (!path)
- return -ENOMEM;
+ if (!path) {
+ ret = -ENOMEM;
+ goto out_free_root;
+ }
key.objectid = 0;
key.type = BTRFS_QGROUP_STATUS_KEY;
ret = btrfs_insert_empty_item(trans, quota_root, path, &key,
sizeof(*ptr));
if (ret)
- goto out;
+ goto out_free_path;
leaf = path->nodes[0];
ptr = btrfs_item_ptr(leaf, path->slots[0],
fs_info->quota_root = quota_root;
fs_info->pending_quota_state = 1;
spin_unlock(&fs_info->qgroup_lock);
-out:
+out_free_path:
btrfs_free_path(path);
+out_free_root:
+ if (ret) {
+ free_extent_buffer(quota_root->node);
+ free_extent_buffer(quota_root->commit_root);
+ kfree(quota_root);
+ }
+out:
return ret;
}
void *ctx);
/*
- * Helper function to iterate the entries in ONE btrfs_inode_ref.
+ * Helper function to iterate the entries in ONE btrfs_inode_ref or
+ * btrfs_inode_extref.
* The iterate callback may return a non zero value to stop iteration. This can
* be a negative value for error codes or 1 to simply stop it.
*
- * path must point to the INODE_REF when called.
+ * path must point to the INODE_REF or INODE_EXTREF when called.
*/
static int iterate_inode_ref(struct send_ctx *sctx,
struct btrfs_root *root, struct btrfs_path *path,
struct btrfs_key *found_key, int resolve,
iterate_inode_ref_t iterate, void *ctx)
{
- struct extent_buffer *eb;
+ struct extent_buffer *eb = path->nodes[0];
struct btrfs_item *item;
struct btrfs_inode_ref *iref;
+ struct btrfs_inode_extref *extref;
struct btrfs_path *tmp_path;
struct fs_path *p;
- u32 cur;
- u32 len;
+ u32 cur = 0;
u32 total;
- int slot;
+ int slot = path->slots[0];
u32 name_len;
char *start;
int ret = 0;
- int num;
+ int num = 0;
int index;
+ u64 dir;
+ unsigned long name_off;
+ unsigned long elem_size;
+ unsigned long ptr;
p = fs_path_alloc_reversed(sctx);
if (!p)
return -ENOMEM;
}
- eb = path->nodes[0];
- slot = path->slots[0];
- item = btrfs_item_nr(eb, slot);
- iref = btrfs_item_ptr(eb, slot, struct btrfs_inode_ref);
- cur = 0;
- len = 0;
- total = btrfs_item_size(eb, item);
- num = 0;
+ if (found_key->type == BTRFS_INODE_REF_KEY) {
+ ptr = (unsigned long)btrfs_item_ptr(eb, slot,
+ struct btrfs_inode_ref);
+ item = btrfs_item_nr(eb, slot);
+ total = btrfs_item_size(eb, item);
+ elem_size = sizeof(*iref);
+ } else {
+ ptr = btrfs_item_ptr_offset(eb, slot);
+ total = btrfs_item_size_nr(eb, slot);
+ elem_size = sizeof(*extref);
+ }
+
while (cur < total) {
fs_path_reset(p);
- name_len = btrfs_inode_ref_name_len(eb, iref);
- index = btrfs_inode_ref_index(eb, iref);
+ if (found_key->type == BTRFS_INODE_REF_KEY) {
+ iref = (struct btrfs_inode_ref *)(ptr + cur);
+ name_len = btrfs_inode_ref_name_len(eb, iref);
+ name_off = (unsigned long)(iref + 1);
+ index = btrfs_inode_ref_index(eb, iref);
+ dir = found_key->offset;
+ } else {
+ extref = (struct btrfs_inode_extref *)(ptr + cur);
+ name_len = btrfs_inode_extref_name_len(eb, extref);
+ name_off = (unsigned long)&extref->name;
+ index = btrfs_inode_extref_index(eb, extref);
+ dir = btrfs_inode_extref_parent(eb, extref);
+ }
+
if (resolve) {
- start = btrfs_iref_to_path(root, tmp_path, iref, eb,
- found_key->offset, p->buf,
- p->buf_len);
+ start = btrfs_ref_to_path(root, tmp_path, name_len,
+ name_off, eb, dir,
+ p->buf, p->buf_len);
if (IS_ERR(start)) {
ret = PTR_ERR(start);
goto out;
p->buf_len + p->buf - start);
if (ret < 0)
goto out;
- start = btrfs_iref_to_path(root, tmp_path, iref,
- eb, found_key->offset, p->buf,
- p->buf_len);
+ start = btrfs_ref_to_path(root, tmp_path,
+ name_len, name_off,
+ eb, dir,
+ p->buf, p->buf_len);
if (IS_ERR(start)) {
ret = PTR_ERR(start);
goto out;
}
p->start = start;
} else {
- ret = fs_path_add_from_extent_buffer(p, eb,
- (unsigned long)(iref + 1), name_len);
+ ret = fs_path_add_from_extent_buffer(p, eb, name_off,
+ name_len);
if (ret < 0)
goto out;
}
-
- len = sizeof(*iref) + name_len;
- iref = (struct btrfs_inode_ref *)((char *)iref + len);
- cur += len;
-
- ret = iterate(num, found_key->offset, index, p, ctx);
+ cur += elem_size + name_len;
+ ret = iterate(num, dir, index, p, ctx);
if (ret)
goto out;
-
num++;
}
}
btrfs_item_key_to_cpu(p->nodes[0], &found_key, p->slots[0]);
if (found_key.objectid != ino ||
- found_key.type != BTRFS_INODE_REF_KEY) {
+ (found_key.type != BTRFS_INODE_REF_KEY &&
+ found_key.type != BTRFS_INODE_EXTREF_KEY)) {
ret = -ENOENT;
goto out;
}
struct btrfs_key key;
struct btrfs_key found_key;
struct btrfs_path *path;
- struct btrfs_inode_ref *iref;
int len;
+ u64 parent_dir;
path = alloc_path_for_send();
if (!path)
if (!ret)
btrfs_item_key_to_cpu(path->nodes[0], &found_key,
path->slots[0]);
- if (ret || found_key.objectid != key.objectid ||
- found_key.type != key.type) {
+ if (ret || found_key.objectid != ino ||
+ (found_key.type != BTRFS_INODE_REF_KEY &&
+ found_key.type != BTRFS_INODE_EXTREF_KEY)) {
ret = -ENOENT;
goto out;
}
- iref = btrfs_item_ptr(path->nodes[0], path->slots[0],
- struct btrfs_inode_ref);
- len = btrfs_inode_ref_name_len(path->nodes[0], iref);
- ret = fs_path_add_from_extent_buffer(name, path->nodes[0],
- (unsigned long)(iref + 1), len);
+ if (key.type == BTRFS_INODE_REF_KEY) {
+ struct btrfs_inode_ref *iref;
+ iref = btrfs_item_ptr(path->nodes[0], path->slots[0],
+ struct btrfs_inode_ref);
+ len = btrfs_inode_ref_name_len(path->nodes[0], iref);
+ ret = fs_path_add_from_extent_buffer(name, path->nodes[0],
+ (unsigned long)(iref + 1),
+ len);
+ parent_dir = found_key.offset;
+ } else {
+ struct btrfs_inode_extref *extref;
+ extref = btrfs_item_ptr(path->nodes[0], path->slots[0],
+ struct btrfs_inode_extref);
+ len = btrfs_inode_extref_name_len(path->nodes[0], extref);
+ ret = fs_path_add_from_extent_buffer(name, path->nodes[0],
+ (unsigned long)&extref->name, len);
+ parent_dir = btrfs_inode_extref_parent(path->nodes[0], extref);
+ }
if (ret < 0)
goto out;
btrfs_release_path(path);
- ret = get_inode_info(root, found_key.offset, NULL, dir_gen, NULL, NULL,
+ ret = get_inode_info(root, parent_dir, NULL, dir_gen, NULL, NULL,
NULL, NULL);
if (ret < 0)
goto out;
- *dir = found_key.offset;
+ *dir = parent_dir;
out:
btrfs_free_path(path);
TLV_PUT_PATH(sctx, BTRFS_SEND_A_PATH_LINK, p);
} else if (S_ISCHR(mode) || S_ISBLK(mode) ||
S_ISFIFO(mode) || S_ISSOCK(mode)) {
- TLV_PUT_U64(sctx, BTRFS_SEND_A_RDEV, rdev);
+ TLV_PUT_U64(sctx, BTRFS_SEND_A_RDEV, new_encode_dev(rdev));
+ TLV_PUT_U64(sctx, BTRFS_SEND_A_MODE, mode);
}
ret = send_cmd(sctx);
btrfs_item_key_to_cpu(eb, &found_key, slot);
if (found_key.objectid != key.objectid ||
- found_key.type != key.type)
+ (found_key.type != BTRFS_INODE_REF_KEY &&
+ found_key.type != BTRFS_INODE_EXTREF_KEY))
break;
ret = iterate_inode_ref(sctx, root, path, &found_key, 0, cb,
if (sctx->cur_ino == 0)
goto out;
if (!at_end && sctx->cur_ino == sctx->cmp_key->objectid &&
- sctx->cmp_key->type <= BTRFS_INODE_REF_KEY)
+ sctx->cmp_key->type <= BTRFS_INODE_EXTREF_KEY)
goto out;
if (list_empty(&sctx->new_refs) && list_empty(&sctx->deleted_refs))
goto out;
if (ret < 0)
goto out;
- if (!S_ISLNK(sctx->cur_inode_mode)) {
- if (!sctx->parent_root || sctx->cur_inode_new) {
+ if (!sctx->parent_root || sctx->cur_inode_new) {
+ need_chown = 1;
+ if (!S_ISLNK(sctx->cur_inode_mode))
need_chmod = 1;
- need_chown = 1;
- } else {
- ret = get_inode_info(sctx->parent_root, sctx->cur_ino,
- NULL, NULL, &right_mode, &right_uid,
- &right_gid, NULL);
- if (ret < 0)
- goto out;
+ } else {
+ ret = get_inode_info(sctx->parent_root, sctx->cur_ino,
+ NULL, NULL, &right_mode, &right_uid,
+ &right_gid, NULL);
+ if (ret < 0)
+ goto out;
- if (left_uid != right_uid || left_gid != right_gid)
- need_chown = 1;
- if (left_mode != right_mode)
- need_chmod = 1;
- }
+ if (left_uid != right_uid || left_gid != right_gid)
+ need_chown = 1;
+ if (!S_ISLNK(sctx->cur_inode_mode) && left_mode != right_mode)
+ need_chmod = 1;
}
if (S_ISREG(sctx->cur_inode_mode)) {
if (key->type == BTRFS_INODE_ITEM_KEY)
ret = changed_inode(sctx, result);
- else if (key->type == BTRFS_INODE_REF_KEY)
+ else if (key->type == BTRFS_INODE_REF_KEY ||
+ key->type == BTRFS_INODE_EXTREF_KEY)
ret = changed_ref(sctx, result);
else if (key->type == BTRFS_XATTR_ITEM_KEY)
ret = changed_xattr(sctx, result);
btrfs_i_size_write(parent_inode, parent_inode->i_size +
dentry->d_name.len * 2);
parent_inode->i_mtime = parent_inode->i_ctime = CURRENT_TIME;
- ret = btrfs_update_inode(trans, parent_root, parent_inode);
+ ret = btrfs_update_inode_fallback(trans, parent_root, parent_inode);
if (ret)
btrfs_abort_transaction(trans, root, ret);
fail:
"Failed to relocate sys chunks after "
"device initialization. This can be fixed "
"using the \"btrfs balance\" command.");
+ trans = btrfs_attach_transaction(root);
+ if (IS_ERR(trans)) {
+ if (PTR_ERR(trans) == -ENOENT)
+ return 0;
+ return PTR_ERR(trans);
+ }
+ ret = btrfs_commit_transaction(trans, root);
}
return ret;
*max_len = handle_length;
type = 255;
}
+ if (dentry)
+ dput(dentry);
return type;
}
err = get_user(palp, &up->palette);
err |= get_user(length, &up->length);
+ if (err)
+ return -EFAULT;
up_native = compat_alloc_user_space(sizeof(struct video_spu_palette));
err = put_user(compat_ptr(palp), &up_native->palette);
bprm->mm = NULL; /* We're using it now */
set_fs(USER_DS);
- current->flags &= ~(PF_RANDOMIZE | PF_FORKNOEXEC | PF_KTHREAD);
+ current->flags &=
+ ~(PF_RANDOMIZE | PF_FORKNOEXEC | PF_KTHREAD | PF_NOFREEZE);
flush_thread();
current->personality &= ~bprm->per_clear;
ext4_free_inodes_set(sb, gdp, 0);
ext4_itable_unused_set(sb, gdp, 0);
memset(bh->b_data, 0xff, sb->s_blocksize);
- ext4_block_bitmap_csum_set(sb, block_group, gdp, bh,
- EXT4_BLOCKS_PER_GROUP(sb) / 8);
+ ext4_block_bitmap_csum_set(sb, block_group, gdp, bh);
return;
}
memset(bh->b_data, 0, sb->s_blocksize);
*/
ext4_mark_bitmap_end(num_clusters_in_group(sb, block_group),
sb->s_blocksize * 8, bh->b_data);
- ext4_block_bitmap_csum_set(sb, block_group, gdp, bh,
- EXT4_BLOCKS_PER_GROUP(sb) / 8);
+ ext4_block_bitmap_csum_set(sb, block_group, gdp, bh);
ext4_group_desc_csum_set(sb, block_group, gdp);
}
return;
}
if (unlikely(!ext4_block_bitmap_csum_verify(sb, block_group,
- desc, bh, EXT4_BLOCKS_PER_GROUP(sb) / 8))) {
+ desc, bh))) {
ext4_unlock_group(sb, block_group);
ext4_error(sb, "bg %u: bad block bitmap checksum", block_group);
return;
int ext4_block_bitmap_csum_verify(struct super_block *sb, ext4_group_t group,
struct ext4_group_desc *gdp,
- struct buffer_head *bh, int sz)
+ struct buffer_head *bh)
{
__u32 hi;
__u32 provided, calculated;
struct ext4_sb_info *sbi = EXT4_SB(sb);
+ int sz = EXT4_CLUSTERS_PER_GROUP(sb) / 8;
if (!EXT4_HAS_RO_COMPAT_FEATURE(sb,
EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
void ext4_block_bitmap_csum_set(struct super_block *sb, ext4_group_t group,
struct ext4_group_desc *gdp,
- struct buffer_head *bh, int sz)
+ struct buffer_head *bh)
{
+ int sz = EXT4_CLUSTERS_PER_GROUP(sb) / 8;
__u32 csum;
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct buffer_head *bh, int sz);
void ext4_block_bitmap_csum_set(struct super_block *sb, ext4_group_t group,
struct ext4_group_desc *gdp,
- struct buffer_head *bh, int sz);
+ struct buffer_head *bh);
int ext4_block_bitmap_csum_verify(struct super_block *sb, ext4_group_t group,
struct ext4_group_desc *gdp,
- struct buffer_head *bh, int sz);
+ struct buffer_head *bh);
/* balloc.c */
extern void ext4_validate_block_bitmap(struct super_block *sb,
extern int ext4_calculate_overhead(struct super_block *sb);
extern int ext4_superblock_csum_verify(struct super_block *sb,
struct ext4_super_block *es);
-extern void ext4_superblock_csum_set(struct super_block *sb,
- struct ext4_super_block *es);
+extern void ext4_superblock_csum_set(struct super_block *sb);
extern void *ext4_kvmalloc(size_t size, gfp_t flags);
extern void *ext4_kvzalloc(size_t size, gfp_t flags);
extern void ext4_kvfree(void *ptr);
struct buffer_head *bh = EXT4_SB(sb)->s_sbh;
int err = 0;
+ ext4_superblock_csum_set(sb);
if (ext4_handle_valid(handle)) {
- ext4_superblock_csum_set(sb,
- (struct ext4_super_block *)bh->b_data);
err = jbd2_journal_dirty_metadata(handle, bh);
if (err)
ext4_journal_abort_handle(where, line, __func__,
bh, handle, err);
- } else {
- ext4_superblock_csum_set(sb,
- (struct ext4_super_block *)bh->b_data);
+ } else
mark_buffer_dirty(bh);
- }
return err;
}
#define EXT4_EXT_MARK_UNINIT1 0x2 /* mark first half uninitialized */
#define EXT4_EXT_MARK_UNINIT2 0x4 /* mark second half uninitialized */
+#define EXT4_EXT_DATA_VALID1 0x8 /* first half contains valid data */
+#define EXT4_EXT_DATA_VALID2 0x10 /* second half contains valid data */
+
static __le32 ext4_extent_block_csum(struct inode *inode,
struct ext4_extent_header *eh)
{
unsigned int ee_len, depth;
int err = 0;
+ BUG_ON((split_flag & (EXT4_EXT_DATA_VALID1 | EXT4_EXT_DATA_VALID2)) ==
+ (EXT4_EXT_DATA_VALID1 | EXT4_EXT_DATA_VALID2));
+
ext_debug("ext4_split_extents_at: inode %lu, logical"
"block %llu\n", inode->i_ino, (unsigned long long)split);
err = ext4_ext_insert_extent(handle, inode, path, &newex, flags);
if (err == -ENOSPC && (EXT4_EXT_MAY_ZEROOUT & split_flag)) {
- err = ext4_ext_zeroout(inode, &orig_ex);
+ if (split_flag & (EXT4_EXT_DATA_VALID1|EXT4_EXT_DATA_VALID2)) {
+ if (split_flag & EXT4_EXT_DATA_VALID1)
+ err = ext4_ext_zeroout(inode, ex2);
+ else
+ err = ext4_ext_zeroout(inode, ex);
+ } else
+ err = ext4_ext_zeroout(inode, &orig_ex);
+
if (err)
goto fix_extent_len;
/* update the extent length and mark as initialized */
uninitialized = ext4_ext_is_uninitialized(ex);
if (map->m_lblk + map->m_len < ee_block + ee_len) {
- split_flag1 = split_flag & EXT4_EXT_MAY_ZEROOUT ?
- EXT4_EXT_MAY_ZEROOUT : 0;
+ split_flag1 = split_flag & EXT4_EXT_MAY_ZEROOUT;
flags1 = flags | EXT4_GET_BLOCKS_PRE_IO;
if (uninitialized)
split_flag1 |= EXT4_EXT_MARK_UNINIT1 |
EXT4_EXT_MARK_UNINIT2;
+ if (split_flag & EXT4_EXT_DATA_VALID2)
+ split_flag1 |= EXT4_EXT_DATA_VALID1;
err = ext4_split_extent_at(handle, inode, path,
map->m_lblk + map->m_len, split_flag1, flags1);
if (err)
return PTR_ERR(path);
if (map->m_lblk >= ee_block) {
- split_flag1 = split_flag & EXT4_EXT_MAY_ZEROOUT ?
- EXT4_EXT_MAY_ZEROOUT : 0;
+ split_flag1 = split_flag & (EXT4_EXT_MAY_ZEROOUT |
+ EXT4_EXT_DATA_VALID2);
if (uninitialized)
split_flag1 |= EXT4_EXT_MARK_UNINIT1;
if (split_flag & EXT4_EXT_MARK_UNINIT2)
split_flag |= ee_block + ee_len <= eof_block ? EXT4_EXT_MAY_ZEROOUT : 0;
split_flag |= EXT4_EXT_MARK_UNINIT2;
-
+ if (flags & EXT4_GET_BLOCKS_CONVERT)
+ split_flag |= EXT4_EXT_DATA_VALID2;
flags |= EXT4_GET_BLOCKS_PRE_IO;
return ext4_split_extent(handle, inode, path, map, split_flag, flags);
}
static int ext4_convert_unwritten_extents_endio(handle_t *handle,
- struct inode *inode,
- struct ext4_ext_path *path)
+ struct inode *inode,
+ struct ext4_map_blocks *map,
+ struct ext4_ext_path *path)
{
struct ext4_extent *ex;
+ ext4_lblk_t ee_block;
+ unsigned int ee_len;
int depth;
int err = 0;
depth = ext_depth(inode);
ex = path[depth].p_ext;
+ ee_block = le32_to_cpu(ex->ee_block);
+ ee_len = ext4_ext_get_actual_len(ex);
ext_debug("ext4_convert_unwritten_extents_endio: inode %lu, logical"
"block %llu, max_blocks %u\n", inode->i_ino,
- (unsigned long long)le32_to_cpu(ex->ee_block),
- ext4_ext_get_actual_len(ex));
+ (unsigned long long)ee_block, ee_len);
+
+ /* If extent is larger than requested then split is required */
+ if (ee_block != map->m_lblk || ee_len > map->m_len) {
+ err = ext4_split_unwritten_extents(handle, inode, map, path,
+ EXT4_GET_BLOCKS_CONVERT);
+ if (err < 0)
+ goto out;
+ ext4_ext_drop_refs(path);
+ path = ext4_ext_find_extent(inode, map->m_lblk, path);
+ if (IS_ERR(path)) {
+ err = PTR_ERR(path);
+ goto out;
+ }
+ depth = ext_depth(inode);
+ ex = path[depth].p_ext;
+ }
err = ext4_ext_get_access(handle, inode, path + depth);
if (err)
}
/* IO end_io complete, convert the filled extent to written */
if ((flags & EXT4_GET_BLOCKS_CONVERT)) {
- ret = ext4_convert_unwritten_extents_endio(handle, inode,
+ ret = ext4_convert_unwritten_extents_endio(handle, inode, map,
path);
if (ret >= 0) {
ext4_update_inode_fsync_trans(handle, inode, 1);
*/
if (len <= EXT_UNINIT_MAX_LEN << blkbits)
flags |= EXT4_GET_BLOCKS_NO_NORMALIZE;
+
+ /* Prevent race condition between unwritten */
+ ext4_flush_unwritten_io(inode);
retry:
while (ret >= 0 && ret < max_blocks) {
map.m_lblk = map.m_lblk + ret;
ext4_free_group_clusters_set(sb, gdp,
ext4_free_clusters_after_init(sb, group, gdp));
ext4_block_bitmap_csum_set(sb, group, gdp,
- block_bitmap_bh,
- EXT4_BLOCKS_PER_GROUP(sb) /
- 8);
+ block_bitmap_bh);
ext4_group_desc_csum_set(sb, group, gdp);
}
ext4_unlock_group(sb, group);
}
len = ext4_free_group_clusters(sb, gdp) - ac->ac_b_ex.fe_len;
ext4_free_group_clusters_set(sb, gdp, len);
- ext4_block_bitmap_csum_set(sb, ac->ac_b_ex.fe_group, gdp, bitmap_bh,
- EXT4_BLOCKS_PER_GROUP(sb) / 8);
+ ext4_block_bitmap_csum_set(sb, ac->ac_b_ex.fe_group, gdp, bitmap_bh);
ext4_group_desc_csum_set(sb, ac->ac_b_ex.fe_group, gdp);
ext4_unlock_group(sb, ac->ac_b_ex.fe_group);
ret = ext4_free_group_clusters(sb, gdp) + count_clusters;
ext4_free_group_clusters_set(sb, gdp, ret);
- ext4_block_bitmap_csum_set(sb, block_group, gdp, bitmap_bh,
- EXT4_BLOCKS_PER_GROUP(sb) / 8);
+ ext4_block_bitmap_csum_set(sb, block_group, gdp, bitmap_bh);
ext4_group_desc_csum_set(sb, block_group, gdp);
ext4_unlock_group(sb, block_group);
percpu_counter_add(&sbi->s_freeclusters_counter, count_clusters);
mb_free_blocks(NULL, &e4b, bit, count);
blk_free_count = blocks_freed + ext4_free_group_clusters(sb, desc);
ext4_free_group_clusters_set(sb, desc, blk_free_count);
- ext4_block_bitmap_csum_set(sb, block_group, desc, bitmap_bh,
- EXT4_BLOCKS_PER_GROUP(sb) / 8);
+ ext4_block_bitmap_csum_set(sb, block_group, desc, bitmap_bh);
ext4_group_desc_csum_set(sb, block_group, desc);
ext4_unlock_group(sb, block_group);
percpu_counter_add(&sbi->s_freeclusters_counter,
minlen = EXT4_NUM_B2C(EXT4_SB(sb),
range->minlen >> sb->s_blocksize_bits);
- if (unlikely(minlen > EXT4_CLUSTERS_PER_GROUP(sb)) ||
- unlikely(start >= max_blks))
+ if (minlen > EXT4_CLUSTERS_PER_GROUP(sb) ||
+ start >= max_blks ||
+ range->len < sb->s_blocksize)
return -EINVAL;
if (end >= max_blks)
end = max_blks - 1;
bh = ext4_get_bitmap(sb, group_data->block_bitmap);
if (!bh)
return -EIO;
- ext4_block_bitmap_csum_set(sb, group, gdp, bh,
- EXT4_BLOCKS_PER_GROUP(sb) / 8);
+ ext4_block_bitmap_csum_set(sb, group, gdp, bh);
brelse(bh);
return 0;
return es->s_checksum == ext4_superblock_csum(sb, es);
}
-void ext4_superblock_csum_set(struct super_block *sb,
- struct ext4_super_block *es)
+void ext4_superblock_csum_set(struct super_block *sb)
{
+ struct ext4_super_block *es = EXT4_SB(sb)->s_es;
+
if (!EXT4_HAS_RO_COMPAT_FEATURE(sb,
EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
return;
sbi->s_log_groups_per_flex = 0;
return 1;
}
- groups_per_flex = 1 << sbi->s_log_groups_per_flex;
+ groups_per_flex = 1U << sbi->s_log_groups_per_flex;
err = ext4_alloc_flex_bg_array(sb, sbi->s_groups_count);
if (err)
cpu_to_le32(percpu_counter_sum_positive(
&EXT4_SB(sb)->s_freeinodes_counter));
BUFFER_TRACE(sbh, "marking dirty");
- ext4_superblock_csum_set(sb, es);
+ ext4_superblock_csum_set(sb);
mark_buffer_dirty(sbh);
if (sync) {
error = sync_dirty_buffer(sbh);
struct bmap *bmp = JFS_SBI(ip->i_sb)->bmap;
struct super_block *sb = ipbmap->i_sb;
int agno, agno_end;
- s64 start, end, minlen;
+ u64 start, end, minlen;
u64 trimmed = 0;
/**
* minlen: minimum extent length in Bytes
*/
start = range->start >> sb->s_blocksize_bits;
- if (start < 0)
- start = 0;
end = start + (range->len >> sb->s_blocksize_bits) - 1;
- if (end >= bmp->db_mapsize)
- end = bmp->db_mapsize - 1;
minlen = range->minlen >> sb->s_blocksize_bits;
- if (minlen <= 0)
+ if (minlen == 0)
minlen = 1;
+ if (minlen > bmp->db_agsize ||
+ start >= bmp->db_mapsize ||
+ range->len < sb->s_blocksize)
+ return -EINVAL;
+
+ if (end >= bmp->db_mapsize)
+ end = bmp->db_mapsize - 1;
+
/**
* we trim all ag's within the range
*/
return rpc_create(&args);
}
+static struct rpc_clnt *nsm_client_set(struct lockd_net *ln,
+ struct rpc_clnt *clnt)
+{
+ spin_lock(&ln->nsm_clnt_lock);
+ if (ln->nsm_users == 0) {
+ if (clnt == NULL)
+ goto out;
+ ln->nsm_clnt = clnt;
+ }
+ clnt = ln->nsm_clnt;
+ ln->nsm_users++;
+out:
+ spin_unlock(&ln->nsm_clnt_lock);
+ return clnt;
+}
+
static struct rpc_clnt *nsm_client_get(struct net *net)
{
- static DEFINE_MUTEX(nsm_create_mutex);
- struct rpc_clnt *clnt;
+ struct rpc_clnt *clnt, *new;
struct lockd_net *ln = net_generic(net, lockd_net_id);
- spin_lock(&ln->nsm_clnt_lock);
- if (ln->nsm_users) {
- ln->nsm_users++;
- clnt = ln->nsm_clnt;
- spin_unlock(&ln->nsm_clnt_lock);
+ clnt = nsm_client_set(ln, NULL);
+ if (clnt != NULL)
goto out;
- }
- spin_unlock(&ln->nsm_clnt_lock);
- mutex_lock(&nsm_create_mutex);
- clnt = nsm_create(net);
- if (!IS_ERR(clnt)) {
- ln->nsm_clnt = clnt;
- smp_wmb();
- ln->nsm_users = 1;
- }
- mutex_unlock(&nsm_create_mutex);
+ clnt = new = nsm_create(net);
+ if (IS_ERR(clnt))
+ goto out;
+
+ clnt = nsm_client_set(ln, new);
+ if (clnt != new)
+ rpc_shutdown_client(new);
out:
return clnt;
}
static void nsm_client_put(struct net *net)
{
struct lockd_net *ln = net_generic(net, lockd_net_id);
- struct rpc_clnt *clnt = ln->nsm_clnt;
- int shutdown = 0;
+ struct rpc_clnt *clnt = NULL;
spin_lock(&ln->nsm_clnt_lock);
- if (ln->nsm_users) {
- if (--ln->nsm_users)
- ln->nsm_clnt = NULL;
- shutdown = !ln->nsm_users;
+ ln->nsm_users--;
+ if (ln->nsm_users == 0) {
+ clnt = ln->nsm_clnt;
+ ln->nsm_clnt = NULL;
}
spin_unlock(&ln->nsm_clnt_lock);
-
- if (shutdown)
+ if (clnt != NULL)
rpc_shutdown_client(clnt);
}
path_put(link);
}
-int sysctl_protected_symlinks __read_mostly = 1;
-int sysctl_protected_hardlinks __read_mostly = 1;
+int sysctl_protected_symlinks __read_mostly = 0;
+int sysctl_protected_hardlinks __read_mostly = 0;
/**
* may_follow_link - Check symlink following for unsafe situations
svc_exit_thread(cb_info->rqst);
cb_info->rqst = NULL;
cb_info->task = NULL;
- return PTR_ERR(cb_info->task);
+ return ret;
}
dprintk("nfs_callback_up: service started\n");
return 0;
}
}
+static void filelayout_fenceme(struct inode *inode, struct pnfs_layout_hdr *lo)
+{
+ if (!test_and_clear_bit(NFS_LAYOUT_RETURN, &lo->plh_flags))
+ return;
+ clear_bit(NFS_INO_LAYOUTCOMMIT, &NFS_I(inode)->flags);
+ pnfs_return_layout(inode);
+}
+
static int filelayout_async_handle_error(struct rpc_task *task,
struct nfs4_state *state,
struct nfs_client *clp,
struct pnfs_layout_segment *lseg)
{
- struct inode *inode = lseg->pls_layout->plh_inode;
+ struct pnfs_layout_hdr *lo = lseg->pls_layout;
+ struct inode *inode = lo->plh_inode;
struct nfs_server *mds_server = NFS_SERVER(inode);
struct nfs4_deviceid_node *devid = FILELAYOUT_DEVID_NODE(lseg);
struct nfs_client *mds_client = mds_server->nfs_client;
dprintk("%s DS connection error %d\n", __func__,
task->tk_status);
nfs4_mark_deviceid_unavailable(devid);
- clear_bit(NFS_INO_LAYOUTCOMMIT, &NFS_I(inode)->flags);
- _pnfs_return_layout(inode);
+ set_bit(NFS_LAYOUT_RETURN, &lo->plh_flags);
rpc_wake_up(&tbl->slot_tbl_waitq);
- nfs4_ds_disconnect(clp);
/* fall through */
default:
reset:
static void filelayout_read_release(void *data)
{
struct nfs_read_data *rdata = data;
+ struct pnfs_layout_hdr *lo = rdata->header->lseg->pls_layout;
+ filelayout_fenceme(lo->plh_inode, lo);
nfs_put_client(rdata->ds_clp);
rdata->header->mds_ops->rpc_release(data);
}
static void filelayout_write_release(void *data)
{
struct nfs_write_data *wdata = data;
+ struct pnfs_layout_hdr *lo = wdata->header->lseg->pls_layout;
+ filelayout_fenceme(lo->plh_inode, lo);
nfs_put_client(wdata->ds_clp);
wdata->header->mds_ops->rpc_release(data);
}
goto out_err;
if (fl->num_fh > 0) {
- fl->fh_array = kzalloc(fl->num_fh * sizeof(struct nfs_fh *),
+ fl->fh_array = kcalloc(fl->num_fh, sizeof(fl->fh_array[0]),
gfp_flags);
if (!fl->fh_array)
goto out_err;
extern void nfs4_fl_free_deviceid(struct nfs4_file_layout_dsaddr *dsaddr);
struct nfs4_file_layout_dsaddr *
filelayout_get_device_info(struct inode *inode, struct nfs4_deviceid *dev_id, gfp_t gfp_flags);
-void nfs4_ds_disconnect(struct nfs_client *clp);
#endif /* FS_NFS_NFS4FILELAYOUT_H */
return NULL;
}
-/*
- * Lookup DS by nfs_client pointer. Zero data server client pointer
- */
-void nfs4_ds_disconnect(struct nfs_client *clp)
-{
- struct nfs4_pnfs_ds *ds;
- struct nfs_client *found = NULL;
-
- dprintk("%s clp %p\n", __func__, clp);
- spin_lock(&nfs4_ds_cache_lock);
- list_for_each_entry(ds, &nfs4_data_server_cache, ds_node)
- if (ds->ds_clp && ds->ds_clp == clp) {
- found = ds->ds_clp;
- ds->ds_clp = NULL;
- }
- spin_unlock(&nfs4_ds_cache_lock);
- if (found) {
- set_bit(NFS_CS_STOP_RENEW, &clp->cl_res_state);
- nfs_put_client(clp);
- }
-}
-
/*
* Create an rpc connection to the nfs4_pnfs_ds data server
* Currently only supports IPv4 and IPv6 addresses
#include <linux/nfs_fs.h>
#include "nfs4_fs.h"
+#include "internal.h"
#define NFSDBG_FACILITY NFSDBG_CLIENT
kfree(objios);
}
-enum pnfs_osd_errno osd_pri_2_pnfs_err(enum osd_err_priority oep)
+static enum pnfs_osd_errno osd_pri_2_pnfs_err(enum osd_err_priority oep)
{
switch (oep) {
case OSD_ERR_PRI_NO_ERROR:
(unsigned long)pgio->pg_layout_private;
}
-void objio_init_read(struct nfs_pageio_descriptor *pgio, struct nfs_page *req)
+static void objio_init_read(struct nfs_pageio_descriptor *pgio, struct nfs_page *req)
{
pnfs_generic_pg_init_read(pgio, req);
if (unlikely(pgio->pg_lseg == NULL))
return false;
}
-void objio_init_write(struct nfs_pageio_descriptor *pgio, struct nfs_page *req)
+static void objio_init_write(struct nfs_pageio_descriptor *pgio, struct nfs_page *req)
{
unsigned long stripe_end = 0;
u64 wb_size;
NFS_LAYOUT_RW_FAILED, /* get rw layout failed stop trying */
NFS_LAYOUT_BULK_RECALL, /* bulk recall affecting layout */
NFS_LAYOUT_ROC, /* some lseg had roc bit set */
+ NFS_LAYOUT_RETURN, /* Return this layout ASAP */
};
enum layoutdriver_policy_flags {
static u64 get_idle_time(int cpu)
{
- u64 idle, idle_time = get_cpu_idle_time_us(cpu, NULL);
+ u64 idle, idle_time = -1ULL;
+
+ if (cpu_online(cpu))
+ idle_time = get_cpu_idle_time_us(cpu, NULL);
if (idle_time == -1ULL)
- /* !NO_HZ so we can rely on cpustat.idle */
+ /* !NO_HZ or cpu offline so we can rely on cpustat.idle */
idle = kcpustat_cpu(cpu).cpustat[CPUTIME_IDLE];
else
idle = usecs_to_cputime64(idle_time);
static u64 get_iowait_time(int cpu)
{
- u64 iowait, iowait_time = get_cpu_iowait_time_us(cpu, NULL);
+ u64 iowait, iowait_time = -1ULL;
+
+ if (cpu_online(cpu))
+ iowait_time = get_cpu_iowait_time_us(cpu, NULL);
if (iowait_time == -1ULL)
- /* !NO_HZ so we can rely on cpustat.iowait */
+ /* !NO_HZ or cpu offline so we can rely on cpustat.iowait */
iowait = kcpustat_cpu(cpu).cpustat[CPUTIME_IOWAIT];
else
iowait = usecs_to_cputime64(iowait_time);
/**
* sysfs_pathname - return full path to sysfs dirent
* @sd: sysfs_dirent whose path we want
- * @path: caller allocated buffer
+ * @path: caller allocated buffer of size PATH_MAX
*
* Gives the name "/" to the sysfs_root entry; any path returned
* is relative to wherever sysfs is mounted.
- *
- * XXX: does no error checking on @path size
*/
static char *sysfs_pathname(struct sysfs_dirent *sd, char *path)
{
if (sd->s_parent) {
sysfs_pathname(sd->s_parent, path);
- strcat(path, "/");
+ strlcat(path, "/", PATH_MAX);
}
- strcat(path, sd->s_name);
+ strlcat(path, sd->s_name, PATH_MAX);
return path;
}
char *path = kzalloc(PATH_MAX, GFP_KERNEL);
WARN(1, KERN_WARNING
"sysfs: cannot create duplicate filename '%s'\n",
- (path == NULL) ? sd->s_name :
- strcat(strcat(sysfs_pathname(acxt->parent_sd, path), "/"),
- sd->s_name));
+ (path == NULL) ? sd->s_name
+ : (sysfs_pathname(acxt->parent_sd, path),
+ strlcat(path, "/", PATH_MAX),
+ strlcat(path, sd->s_name, PATH_MAX),
+ path));
kfree(path);
}
{0x1002, 0x6788, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
{0x1002, 0x678A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6790, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x6791, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x6792, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6798, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6799, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
{0x1002, 0x679A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6808, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6809, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6810, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x6811, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6816, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6817, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6818, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
const char *fmt, ...);
#define DEFINE_DYNAMIC_DEBUG_METADATA(name, fmt) \
- static struct _ddebug __used __aligned(8) \
+ static struct _ddebug __aligned(8) \
__attribute__((section("__verbose"))) name = { \
.modname = KBUILD_MODNAME, \
.function = __func__, \
EXTCON_VIDEO_OUT,
EXTCON_MECHANICAL,
};
-extern const char *extcon_cable_name[];
+extern const char extcon_cable_name[][CABLE_NAME_MAX + 1];
struct extcon_cable;
};
#endif
+/**
+ * IIO_DEGREE_TO_RAD() - Convert degree to rad
+ * @deg: A value in degree
+ *
+ * Returns the given value converted from degree to rad
+ */
+#define IIO_DEGREE_TO_RAD(deg) (((deg) * 314159ULL + 9000000ULL) / 18000000ULL)
+
+/**
+ * IIO_G_TO_M_S_2() - Convert g to meter / second**2
+ * @g: A value in g
+ *
+ * Returns the given value converted from g to meter / second**2
+ */
+#define IIO_G_TO_M_S_2(g) ((g) * 980665ULL / 100000ULL)
+
#endif /* _INDUSTRIAL_IO_H_ */
int memblock_remove(phys_addr_t base, phys_addr_t size);
int memblock_free(phys_addr_t base, phys_addr_t size);
int memblock_reserve(phys_addr_t base, phys_addr_t size);
+void memblock_trim_memory(phys_addr_t align);
#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
void __next_mem_pfn_range(int *idx, int nid, unsigned long *out_start_pfn,
#ifndef __LINUX_MFD_MAX77693_H
#define __LINUX_MFD_MAX77693_H
+struct max77693_reg_data {
+ u8 addr;
+ u8 data;
+};
+
+struct max77693_muic_platform_data {
+ struct max77693_reg_data *init_data;
+ int num_init_data;
+};
+
struct max77693_platform_data {
int wakeup;
+
+ /* muic data */
+ struct max77693_muic_platform_data *muic_data;
};
#endif /* __LINUX_MFD_MAX77693_H */
struct mutex mtx;
};
+#define light_mb() barrier()
+#define heavy_mb() synchronize_sched()
+
static inline void percpu_down_read(struct percpu_rw_semaphore *p)
{
- rcu_read_lock();
+ rcu_read_lock_sched();
if (unlikely(p->locked)) {
- rcu_read_unlock();
+ rcu_read_unlock_sched();
mutex_lock(&p->mtx);
this_cpu_inc(*p->counters);
mutex_unlock(&p->mtx);
return;
}
this_cpu_inc(*p->counters);
- rcu_read_unlock();
+ rcu_read_unlock_sched();
+ light_mb(); /* A, between read of p->locked and read of data, paired with D */
}
static inline void percpu_up_read(struct percpu_rw_semaphore *p)
{
- /*
- * On X86, write operation in this_cpu_dec serves as a memory unlock
- * barrier (i.e. memory accesses may be moved before the write, but
- * no memory accesses are moved past the write).
- * On other architectures this may not be the case, so we need smp_mb()
- * there.
- */
-#if defined(CONFIG_X86) && (!defined(CONFIG_X86_PPRO_FENCE) && !defined(CONFIG_X86_OOSTORE))
- barrier();
-#else
- smp_mb();
-#endif
+ light_mb(); /* B, between read of the data and write to p->counter, paired with C */
this_cpu_dec(*p->counters);
}
{
mutex_lock(&p->mtx);
p->locked = true;
- synchronize_rcu();
+ synchronize_sched(); /* make sure that all readers exit the rcu_read_lock_sched region */
while (__percpu_count(p->counters))
msleep(1);
- smp_rmb(); /* paired with smp_mb() in percpu_sem_up_read() */
+ heavy_mb(); /* C, between read of p->counter and write to data, paired with B */
}
static inline void percpu_up_write(struct percpu_rw_semaphore *p)
{
+ heavy_mb(); /* D, between write to data and write to p->locked, paired with A */
p->locked = false;
mutex_unlock(&p->mtx);
}
do { \
static struct notifier_block fn##_nb __cpuinitdata = \
{ .notifier_call = fn, .priority = CPU_PRI_PERF }; \
+ unsigned long cpu = smp_processor_id(); \
+ unsigned long flags; \
fn(&fn##_nb, (unsigned long)CPU_UP_PREPARE, \
- (void *)(unsigned long)smp_processor_id()); \
+ (void *)(unsigned long)cpu); \
+ local_irq_save(flags); \
fn(&fn##_nb, (unsigned long)CPU_STARTING, \
- (void *)(unsigned long)smp_processor_id()); \
+ (void *)(unsigned long)cpu); \
+ local_irq_restore(flags); \
fn(&fn##_nb, (unsigned long)CPU_ONLINE, \
- (void *)(unsigned long)smp_processor_id()); \
+ (void *)(unsigned long)cpu); \
register_cpu_notifier(&fn##_nb); \
} while (0)
#ifndef _LINUX_RBTREE_AUGMENTED_H
#define _LINUX_RBTREE_AUGMENTED_H
+#include <linux/compiler.h>
#include <linux/rbtree.h>
/*
*
* Copyright (C) 2009-2010 Nokia Corporation
*
- * Contact: Aaro Koskinen <aaro.koskinen@nokia.com>
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
u8 do_early_retrans:1,/* Enable RFC5827 early-retransmit */
early_retrans_delayed:1, /* Delayed ER timer installed */
syn_data:1, /* SYN includes data */
- syn_fastopen:1; /* SYN includes Fast Open option */
+ syn_fastopen:1, /* SYN includes Fast Open option */
+ syn_data_acked:1;/* data in SYN is acked by SYN-ACK */
/* RTT measurement */
u32 srtt; /* smoothed round trip time << 3 */
# include <asm/uprobes.h>
#endif
-/* flags that denote/change uprobes behaviour */
-
-/* Have a copy of original instruction */
-#define UPROBE_COPY_INSN 0x1
-
-/* Dont run handlers when first register/ last unregister in progress*/
-#define UPROBE_RUN_HANDLER 0x2
-/* Can skip singlestep */
-#define UPROBE_SKIP_SSTEP 0x4
-
struct uprobe_consumer {
int (*handler)(struct uprobe_consumer *self, struct pt_regs *regs);
/*
#ifdef CONFIG_UPROBES
enum uprobe_task_state {
UTASK_RUNNING,
- UTASK_BP_HIT,
UTASK_SSTEP,
UTASK_SSTEP_ACK,
UTASK_SSTEP_TRAPPED,
const u8 *ie;
size_t ie_len;
u16 reason_code;
+ bool local_state_change;
};
/**
#define TCPI_OPT_WSCALE 4
#define TCPI_OPT_ECN 8 /* ECN was negociated at TCP session init */
#define TCPI_OPT_ECN_SEEN 16 /* we received at least one packet with ECT */
+#define TCPI_OPT_SYN_DATA 32 /* SYN-ACK acked data in SYN sent or rcvd */
enum tcp_ca_state {
TCP_CA_Open = 0,
unmap->dev_bus_addr = 0;
}
-int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes,
+int arch_gnttab_map_shared(xen_pfn_t *frames, unsigned long nr_gframes,
unsigned long max_nr_gframes,
void **__shared);
int arch_gnttab_map_status(uint64_t *frames, unsigned long nr_gframes,
uint32_t nr_frames;
/* OUT parameters. */
int16_t status; /* GNTST_* */
- GUEST_HANDLE(ulong) frame_list;
+ GUEST_HANDLE(xen_pfn_t) frame_list;
};
DEFINE_GUEST_HANDLE_STRUCT(gnttab_setup_table);
};
DEFINE_GUEST_HANDLE_STRUCT(xen_add_to_physmap);
-/*
- * Translates a list of domain-specific GPFNs into MFNs. Returns a -ve error
- * code on failure. This call only works for auto-translated guests.
- */
-#define XENMEM_translate_gpfn_list 8
-struct xen_translate_gpfn_list {
- /* Which domain to translate for? */
- domid_t domid;
-
- /* Length of list. */
- xen_ulong_t nr_gpfns;
-
- /* List of GPFNs to translate. */
- GUEST_HANDLE(ulong) gpfn_list;
-
- /*
- * Output list to contain MFN translations. May be the same as the input
- * list (in which case each input GPFN is overwritten with the output MFN).
- */
- GUEST_HANDLE(ulong) mfn_list;
-};
-DEFINE_GUEST_HANDLE_STRUCT(xen_translate_gpfn_list);
+/*** REMOVED ***/
+/*#define XENMEM_translate_gpfn_list 8*/
/*
* Returns the pseudo-physical memory map as it was when the domain
@echo "###"
@echo "### If this takes a long time, you might wish to run rngd in the"
@echo "### background to keep the supply of entropy topped up. It"
- @echo "### needs to be run as root, and should use a hardware random"
- @echo "### number generator if one is available, eg:"
- @echo "###"
- @echo "### rngd -r /dev/hwrandom"
+ @echo "### needs to be run as root, and uses a hardware random"
+ @echo "### number generator if one is available."
@echo "###"
openssl req -new -nodes -utf8 $(sign_key_with_hash) -days 36500 -batch \
-x509 -config x509.genkey \
* trading it for newcg is protected by cgroup_mutex, we're safe to drop
* it here; it will be freed under RCU.
*/
- put_css_set(oldcg);
-
set_bit(CGRP_RELEASABLE, &oldcgrp->flags);
+ put_css_set(oldcg);
}
/**
*
* A pointer to the shared css_set was automatically copied in
* fork.c by dup_task_struct(). However, we ignore that copy, since
- * it was not made under the protection of RCU, cgroup_mutex or
- * threadgroup_change_begin(), so it might no longer be a valid
- * cgroup pointer. cgroup_attach_task() might have already changed
- * current->cgroups, allowing the previously referenced cgroup
- * group to be removed and freed.
- *
- * Outside the pointer validity we also need to process the css_set
- * inheritance between threadgoup_change_begin() and
- * threadgoup_change_end(), this way there is no leak in any process
- * wide migration performed by cgroup_attach_proc() that could otherwise
- * miss a thread because it is too early or too late in the fork stage.
+ * it was not made under the protection of RCU or cgroup_mutex, so
+ * might no longer be a valid cgroup pointer. cgroup_attach_task() might
+ * have already changed current->cgroups, allowing the previously
+ * referenced cgroup group to be removed and freed.
*
* At the point that cgroup_fork() is called, 'current' is the parent
* task, and the passed argument 'child' points to the child task.
*/
void cgroup_fork(struct task_struct *child)
{
- /*
- * We don't need to task_lock() current because current->cgroups
- * can't be changed concurrently here. The parent obviously hasn't
- * exited and called cgroup_exit(), and we are synchronized against
- * cgroup migration through threadgroup_change_begin().
- */
+ task_lock(current);
child->cgroups = current->cgroups;
get_css_set(child->cgroups);
+ task_unlock(current);
INIT_LIST_HEAD(&child->cg_list);
}
*/
if (use_task_css_set_links) {
write_lock(&css_set_lock);
- if (list_empty(&child->cg_list)) {
- /*
- * It's safe to use child->cgroups without task_lock()
- * here because we are protected through
- * threadgroup_change_begin() against concurrent
- * css_set change in cgroup_task_migrate(). Also
- * the task can't exit at that point until
- * wake_up_new_task() is called, so we are protected
- * against cgroup_exit() setting child->cgroup to
- * init_css_set.
- */
+ task_lock(child);
+ if (list_empty(&child->cg_list))
list_add(&child->cg_list, &child->cgroups->tasks);
- }
+ task_unlock(child);
write_unlock(&css_set_lock);
}
}
*/
static atomic_t uprobe_events = ATOMIC_INIT(0);
+/* Have a copy of original instruction */
+#define UPROBE_COPY_INSN 0
+/* Dont run handlers when first register/ last unregister in progress*/
+#define UPROBE_RUN_HANDLER 1
+/* Can skip singlestep */
+#define UPROBE_SKIP_SSTEP 2
+
struct uprobe {
struct rb_node rb_node; /* node in the rb tree */
atomic_t ref;
struct rw_semaphore consumer_rwsem;
+ struct mutex copy_mutex; /* TODO: kill me and UPROBE_COPY_INSN */
struct list_head pending_list;
struct uprobe_consumer *consumers;
struct inode *inode; /* Also hold a ref to inode */
loff_t offset;
- int flags;
+ unsigned long flags;
struct arch_uprobe arch;
};
*/
static bool valid_vma(struct vm_area_struct *vma, bool is_register)
{
- if (!vma->vm_file)
- return false;
-
- if (!is_register)
- return true;
+ vm_flags_t flags = VM_HUGETLB | VM_MAYEXEC | VM_SHARED;
- if ((vma->vm_flags & (VM_HUGETLB|VM_READ|VM_WRITE|VM_EXEC|VM_SHARED))
- == (VM_READ|VM_EXEC))
- return true;
+ if (is_register)
+ flags |= VM_WRITE;
- return false;
+ return vma->vm_file && (vma->vm_flags & flags) == VM_MAYEXEC;
}
static unsigned long offset_to_vaddr(struct vm_area_struct *vma, loff_t offset)
return *insn == UPROBE_SWBP_INSN;
}
+static void copy_opcode(struct page *page, unsigned long vaddr, uprobe_opcode_t *opcode)
+{
+ void *kaddr = kmap_atomic(page);
+ memcpy(opcode, kaddr + (vaddr & ~PAGE_MASK), UPROBE_SWBP_INSN_SIZE);
+ kunmap_atomic(kaddr);
+}
+
+static int verify_opcode(struct page *page, unsigned long vaddr, uprobe_opcode_t *new_opcode)
+{
+ uprobe_opcode_t old_opcode;
+ bool is_swbp;
+
+ copy_opcode(page, vaddr, &old_opcode);
+ is_swbp = is_swbp_insn(&old_opcode);
+
+ if (is_swbp_insn(new_opcode)) {
+ if (is_swbp) /* register: already installed? */
+ return 0;
+ } else {
+ if (!is_swbp) /* unregister: was it changed by us? */
+ return 0;
+ }
+
+ return 1;
+}
+
/*
* NOTE:
* Expect the breakpoint instruction to be the smallest size instruction for
* the architecture. If an arch has variable length instruction and the
* breakpoint instruction is not of the smallest length instruction
- * supported by that architecture then we need to modify read_opcode /
+ * supported by that architecture then we need to modify is_swbp_at_addr and
* write_opcode accordingly. This would never be a problem for archs that
* have fixed length instructions.
*/
/*
* write_opcode - write the opcode at a given virtual address.
- * @auprobe: arch breakpointing information.
* @mm: the probed process address space.
* @vaddr: the virtual address to store the opcode.
* @opcode: opcode to be written at @vaddr.
* For mm @mm, write the opcode at @vaddr.
* Return 0 (success) or a negative errno.
*/
-static int write_opcode(struct arch_uprobe *auprobe, struct mm_struct *mm,
- unsigned long vaddr, uprobe_opcode_t opcode)
+static int write_opcode(struct mm_struct *mm, unsigned long vaddr,
+ uprobe_opcode_t opcode)
{
struct page *old_page, *new_page;
void *vaddr_old, *vaddr_new;
retry:
/* Read the page with vaddr into memory */
- ret = get_user_pages(NULL, mm, vaddr, 1, 0, 0, &old_page, &vma);
+ ret = get_user_pages(NULL, mm, vaddr, 1, 0, 1, &old_page, &vma);
if (ret <= 0)
return ret;
+ ret = verify_opcode(old_page, vaddr, &opcode);
+ if (ret <= 0)
+ goto put_old;
+
ret = -ENOMEM;
new_page = alloc_page_vma(GFP_HIGHUSER_MOVABLE, vma, vaddr);
if (!new_page)
return ret;
}
-/**
- * read_opcode - read the opcode at a given virtual address.
- * @mm: the probed process address space.
- * @vaddr: the virtual address to read the opcode.
- * @opcode: location to store the read opcode.
- *
- * Called with mm->mmap_sem held (for read and with a reference to
- * mm.
- *
- * For mm @mm, read the opcode at @vaddr and store it in @opcode.
- * Return 0 (success) or a negative errno.
- */
-static int read_opcode(struct mm_struct *mm, unsigned long vaddr, uprobe_opcode_t *opcode)
-{
- struct page *page;
- void *vaddr_new;
- int ret;
-
- ret = get_user_pages(NULL, mm, vaddr, 1, 0, 1, &page, NULL);
- if (ret <= 0)
- return ret;
-
- vaddr_new = kmap_atomic(page);
- vaddr &= ~PAGE_MASK;
- memcpy(opcode, vaddr_new + vaddr, UPROBE_SWBP_INSN_SIZE);
- kunmap_atomic(vaddr_new);
-
- put_page(page);
-
- return 0;
-}
-
-static int is_swbp_at_addr(struct mm_struct *mm, unsigned long vaddr)
-{
- uprobe_opcode_t opcode;
- int result;
-
- if (current->mm == mm) {
- pagefault_disable();
- result = __copy_from_user_inatomic(&opcode, (void __user*)vaddr,
- sizeof(opcode));
- pagefault_enable();
-
- if (likely(result == 0))
- goto out;
- }
-
- result = read_opcode(mm, vaddr, &opcode);
- if (result)
- return result;
-out:
- if (is_swbp_insn(&opcode))
- return 1;
-
- return 0;
-}
-
/**
* set_swbp - store breakpoint at a given address.
* @auprobe: arch specific probepoint information.
*/
int __weak set_swbp(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long vaddr)
{
- int result;
- /*
- * See the comment near uprobes_hash().
- */
- result = is_swbp_at_addr(mm, vaddr);
- if (result == 1)
- return 0;
-
- if (result)
- return result;
-
- return write_opcode(auprobe, mm, vaddr, UPROBE_SWBP_INSN);
+ return write_opcode(mm, vaddr, UPROBE_SWBP_INSN);
}
/**
int __weak
set_orig_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long vaddr)
{
- int result;
-
- result = is_swbp_at_addr(mm, vaddr);
- if (!result)
- return -EINVAL;
-
- if (result != 1)
- return result;
-
- return write_opcode(auprobe, mm, vaddr, *(uprobe_opcode_t *)auprobe->insn);
+ return write_opcode(mm, vaddr, *(uprobe_opcode_t *)auprobe->insn);
}
static int match_uprobe(struct uprobe *l, struct uprobe *r)
spin_unlock(&uprobes_treelock);
/* For now assume that the instruction need not be single-stepped */
- uprobe->flags |= UPROBE_SKIP_SSTEP;
+ __set_bit(UPROBE_SKIP_SSTEP, &uprobe->flags);
return u;
}
uprobe->inode = igrab(inode);
uprobe->offset = offset;
init_rwsem(&uprobe->consumer_rwsem);
+ mutex_init(&uprobe->copy_mutex);
/* add to uprobes_tree, sorted on inode:offset */
cur_uprobe = insert_uprobe(uprobe);
{
struct uprobe_consumer *uc;
- if (!(uprobe->flags & UPROBE_RUN_HANDLER))
+ if (!test_bit(UPROBE_RUN_HANDLER, &uprobe->flags))
return;
down_read(&uprobe->consumer_rwsem);
return __copy_insn(mapping, filp, uprobe->arch.insn, bytes, uprobe->offset);
}
-/*
- * How mm->uprobes_state.count gets updated
- * uprobe_mmap() increments the count if
- * - it successfully adds a breakpoint.
- * - it cannot add a breakpoint, but sees that there is a underlying
- * breakpoint (via a is_swbp_at_addr()).
- *
- * uprobe_munmap() decrements the count if
- * - it sees a underlying breakpoint, (via is_swbp_at_addr)
- * (Subsequent uprobe_unregister wouldnt find the breakpoint
- * unless a uprobe_mmap kicks in, since the old vma would be
- * dropped just after uprobe_munmap.)
- *
- * uprobe_register increments the count if:
- * - it successfully adds a breakpoint.
- *
- * uprobe_unregister decrements the count if:
- * - it sees a underlying breakpoint and removes successfully.
- * (via is_swbp_at_addr)
- * (Subsequent uprobe_munmap wouldnt find the breakpoint
- * since there is no underlying breakpoint after the
- * breakpoint removal.)
- */
+static int prepare_uprobe(struct uprobe *uprobe, struct file *file,
+ struct mm_struct *mm, unsigned long vaddr)
+{
+ int ret = 0;
+
+ if (test_bit(UPROBE_COPY_INSN, &uprobe->flags))
+ return ret;
+
+ mutex_lock(&uprobe->copy_mutex);
+ if (test_bit(UPROBE_COPY_INSN, &uprobe->flags))
+ goto out;
+
+ ret = copy_insn(uprobe, file);
+ if (ret)
+ goto out;
+
+ ret = -ENOTSUPP;
+ if (is_swbp_insn((uprobe_opcode_t *)uprobe->arch.insn))
+ goto out;
+
+ ret = arch_uprobe_analyze_insn(&uprobe->arch, mm, vaddr);
+ if (ret)
+ goto out;
+
+ /* write_opcode() assumes we don't cross page boundary */
+ BUG_ON((uprobe->offset & ~PAGE_MASK) +
+ UPROBE_SWBP_INSN_SIZE > PAGE_SIZE);
+
+ smp_wmb(); /* pairs with rmb() in find_active_uprobe() */
+ set_bit(UPROBE_COPY_INSN, &uprobe->flags);
+
+ out:
+ mutex_unlock(&uprobe->copy_mutex);
+
+ return ret;
+}
+
static int
install_breakpoint(struct uprobe *uprobe, struct mm_struct *mm,
struct vm_area_struct *vma, unsigned long vaddr)
if (!uprobe->consumers)
return 0;
- if (!(uprobe->flags & UPROBE_COPY_INSN)) {
- ret = copy_insn(uprobe, vma->vm_file);
- if (ret)
- return ret;
-
- if (is_swbp_insn((uprobe_opcode_t *)uprobe->arch.insn))
- return -ENOTSUPP;
-
- ret = arch_uprobe_analyze_insn(&uprobe->arch, mm, vaddr);
- if (ret)
- return ret;
-
- /* write_opcode() assumes we don't cross page boundary */
- BUG_ON((uprobe->offset & ~PAGE_MASK) +
- UPROBE_SWBP_INSN_SIZE > PAGE_SIZE);
-
- uprobe->flags |= UPROBE_COPY_INSN;
- }
+ ret = prepare_uprobe(uprobe, vma->vm_file, mm, vaddr);
+ if (ret)
+ return ret;
/*
* set MMF_HAS_UPROBES in advance for uprobe_pre_sstep_notifier(),
return ret;
}
-static void
+static int
remove_breakpoint(struct uprobe *uprobe, struct mm_struct *mm, unsigned long vaddr)
{
/* can happen if uprobe_register() fails */
if (!test_bit(MMF_HAS_UPROBES, &mm->flags))
- return;
+ return 0;
set_bit(MMF_RECALC_UPROBES, &mm->flags);
- set_orig_insn(&uprobe->arch, mm, vaddr);
+ return set_orig_insn(&uprobe->arch, mm, vaddr);
}
/*
struct mm_struct *mm = info->mm;
struct vm_area_struct *vma;
- if (err)
+ if (err && is_register)
goto free;
down_write(&mm->mmap_sem);
if (is_register)
err = install_breakpoint(uprobe, mm, vma, info->vaddr);
else
- remove_breakpoint(uprobe, mm, info->vaddr);
+ err |= remove_breakpoint(uprobe, mm, info->vaddr);
unlock:
up_write(&mm->mmap_sem);
mutex_lock(uprobes_hash(inode));
uprobe = alloc_uprobe(inode, offset);
- if (uprobe && !consumer_add(uprobe, uc)) {
+ if (!uprobe) {
+ ret = -ENOMEM;
+ } else if (!consumer_add(uprobe, uc)) {
ret = __uprobe_register(uprobe);
if (ret) {
uprobe->consumers = NULL;
__uprobe_unregister(uprobe);
} else {
- uprobe->flags |= UPROBE_RUN_HANDLER;
+ set_bit(UPROBE_RUN_HANDLER, &uprobe->flags);
}
}
if (consumer_del(uprobe, uc)) {
if (!uprobe->consumers) {
__uprobe_unregister(uprobe);
- uprobe->flags &= ~UPROBE_RUN_HANDLER;
+ clear_bit(UPROBE_RUN_HANDLER, &uprobe->flags);
}
}
*/
static bool can_skip_sstep(struct uprobe *uprobe, struct pt_regs *regs)
{
- if (arch_uprobe_skip_sstep(&uprobe->arch, regs))
- return true;
-
- uprobe->flags &= ~UPROBE_SKIP_SSTEP;
+ if (test_bit(UPROBE_SKIP_SSTEP, &uprobe->flags)) {
+ if (arch_uprobe_skip_sstep(&uprobe->arch, regs))
+ return true;
+ clear_bit(UPROBE_SKIP_SSTEP, &uprobe->flags);
+ }
return false;
}
clear_bit(MMF_HAS_UPROBES, &mm->flags);
}
+static int is_swbp_at_addr(struct mm_struct *mm, unsigned long vaddr)
+{
+ struct page *page;
+ uprobe_opcode_t opcode;
+ int result;
+
+ pagefault_disable();
+ result = __copy_from_user_inatomic(&opcode, (void __user*)vaddr,
+ sizeof(opcode));
+ pagefault_enable();
+
+ if (likely(result == 0))
+ goto out;
+
+ result = get_user_pages(NULL, mm, vaddr, 1, 0, 1, &page, NULL);
+ if (result < 0)
+ return result;
+
+ copy_opcode(page, vaddr, &opcode);
+ put_page(page);
+ out:
+ return is_swbp_insn(&opcode);
+}
+
static struct uprobe *find_active_uprobe(unsigned long bp_vaddr, int *is_swbp)
{
struct mm_struct *mm = current->mm;
}
return;
}
+ /*
+ * TODO: move copy_insn/etc into _register and remove this hack.
+ * After we hit the bp, _unregister + _register can install the
+ * new and not-yet-analyzed uprobe at the same address, restart.
+ */
+ smp_rmb(); /* pairs with wmb() in install_breakpoint() */
+ if (unlikely(!test_bit(UPROBE_COPY_INSN, &uprobe->flags)))
+ goto restart;
utask = current->utask;
if (!utask) {
utask = add_utask();
/* Cannot allocate; re-execute the instruction. */
if (!utask)
- goto cleanup_ret;
+ goto restart;
}
- utask->active_uprobe = uprobe;
+
handler_chain(uprobe, regs);
- if (uprobe->flags & UPROBE_SKIP_SSTEP && can_skip_sstep(uprobe, regs))
- goto cleanup_ret;
+ if (can_skip_sstep(uprobe, regs))
+ goto out;
- utask->state = UTASK_SSTEP;
if (!pre_ssout(uprobe, regs, bp_vaddr)) {
arch_uprobe_enable_step(&uprobe->arch);
+ utask->active_uprobe = uprobe;
+ utask->state = UTASK_SSTEP;
return;
}
-cleanup_ret:
- if (utask) {
- utask->active_uprobe = NULL;
- utask->state = UTASK_RUNNING;
- }
- if (!(uprobe->flags & UPROBE_SKIP_SSTEP))
-
- /*
- * cannot singlestep; cannot skip instruction;
- * re-execute the instruction.
- */
- instruction_pointer_set(regs, bp_vaddr);
-
+restart:
+ /*
+ * cannot singlestep; cannot skip instruction;
+ * re-execute the instruction.
+ */
+ instruction_pointer_set(regs, bp_vaddr);
+out:
put_uprobe(uprobe);
}
}
/*
- * On breakpoint hit, breakpoint notifier sets the TIF_UPROBE flag. (and on
- * subsequent probe hits on the thread sets the state to UTASK_BP_HIT) and
- * allows the thread to return from interrupt.
+ * On breakpoint hit, breakpoint notifier sets the TIF_UPROBE flag and
+ * allows the thread to return from interrupt. After that handle_swbp()
+ * sets utask->active_uprobe.
*
- * On singlestep exception, singlestep notifier sets the TIF_UPROBE flag and
- * also sets the state to UTASK_SSTEP_ACK and allows the thread to return from
- * interrupt.
+ * On singlestep exception, singlestep notifier sets the TIF_UPROBE flag
+ * and allows the thread to return from interrupt.
*
* While returning to userspace, thread notices the TIF_UPROBE flag and calls
* uprobe_notify_resume().
{
struct uprobe_task *utask;
+ clear_thread_flag(TIF_UPROBE);
+
utask = current->utask;
- if (!utask || utask->state == UTASK_BP_HIT)
- handle_swbp(regs);
- else
+ if (utask && utask->active_uprobe)
handle_singlestep(utask, regs);
+ else
+ handle_swbp(regs);
}
/*
*/
int uprobe_pre_sstep_notifier(struct pt_regs *regs)
{
- struct uprobe_task *utask;
-
if (!current->mm || !test_bit(MMF_HAS_UPROBES, ¤t->mm->flags))
return 0;
- utask = current->utask;
- if (utask)
- utask->state = UTASK_BP_HIT;
-
set_thread_flag(TIF_UPROBE);
-
return 1;
}
return NULL;
}
+/* MAX_PID_NS_LEVEL is needed for limiting size of 'struct pid' */
+#define MAX_PID_NS_LEVEL 32
+
static struct pid_namespace *create_pid_namespace(struct pid_namespace *parent_pid_ns)
{
struct pid_namespace *ns;
unsigned int level = parent_pid_ns->level + 1;
- int i, err = -ENOMEM;
+ int i;
+ int err;
+
+ if (level > MAX_PID_NS_LEVEL) {
+ err = -EINVAL;
+ goto out;
+ }
+ err = -ENOMEM;
ns = kmem_cache_zalloc(pid_ns_cachep, GFP_KERNEL);
if (ns == NULL)
goto out;
put_online_cpus();
} else {
+ /* Make sure this CPU has been intitialized */
+ if (!cpumask_test_cpu(cpu_id, buffer->cpumask))
+ goto out;
+
cpu_buffer = buffer->buffers[cpu_id];
if (nr_pages == cpu_buffer->nr_pages)
set_work_cpu_and_clear_pending(&dwork->work, work_cpu(&dwork->work));
local_irq_restore(flags);
- return true;
+ return ret;
}
EXPORT_SYMBOL(cancel_delayed_work);
struct gen_pool_chunk *chunk;
int nbits = size >> pool->min_alloc_order;
int nbytes = sizeof(struct gen_pool_chunk) +
- (nbits + BITS_PER_BYTE - 1) / BITS_PER_BYTE;
+ BITS_TO_LONGS(nbits) * sizeof(long);
chunk = kmalloc_node(nbytes, GFP_KERNEL | __GFP_ZERO, nid);
if (unlikely(chunk == NULL))
return memblock_overlaps_region(&memblock.reserved, base, size) >= 0;
}
+void __init_memblock memblock_trim_memory(phys_addr_t align)
+{
+ int i;
+ phys_addr_t start, end, orig_start, orig_end;
+ struct memblock_type *mem = &memblock.memory;
+
+ for (i = 0; i < mem->cnt; i++) {
+ orig_start = mem->regions[i].base;
+ orig_end = mem->regions[i].base + mem->regions[i].size;
+ start = round_up(orig_start, align);
+ end = round_down(orig_end, align);
+
+ if (start == orig_start && end == orig_end)
+ continue;
+
+ if (start < end) {
+ mem->regions[i].base = start;
+ mem->regions[i].size = end - start;
+ } else {
+ memblock_remove_region(mem, i);
+ i--;
+ }
+ }
+}
void __init_memblock memblock_set_current_limit(phys_addr_t limit)
{
BUG_ON(atomic_read(&mm->mm_users) <= 0);
/*
- * Verify that mmu_notifier_init() already run and the global srcu is
- * initialized.
- */
+ * Verify that mmu_notifier_init() already run and the global srcu is
+ * initialized.
+ */
BUG_ON(!srcu.per_cpu_ref);
+ ret = -ENOMEM;
+ mmu_notifier_mm = kmalloc(sizeof(struct mmu_notifier_mm), GFP_KERNEL);
+ if (unlikely(!mmu_notifier_mm))
+ goto out;
+
if (take_mmap_sem)
down_write(&mm->mmap_sem);
ret = mm_take_all_locks(mm);
if (unlikely(ret))
- goto out;
+ goto out_clean;
if (!mm_has_notifiers(mm)) {
- mmu_notifier_mm = kmalloc(sizeof(struct mmu_notifier_mm),
- GFP_KERNEL);
- if (unlikely(!mmu_notifier_mm)) {
- ret = -ENOMEM;
- goto out_of_mem;
- }
INIT_HLIST_HEAD(&mmu_notifier_mm->list);
spin_lock_init(&mmu_notifier_mm->lock);
mm->mmu_notifier_mm = mmu_notifier_mm;
+ mmu_notifier_mm = NULL;
}
atomic_inc(&mm->mm_count);
hlist_add_head(&mn->hlist, &mm->mmu_notifier_mm->list);
spin_unlock(&mm->mmu_notifier_mm->lock);
-out_of_mem:
mm_drop_all_locks(mm);
-out:
+out_clean:
if (take_mmap_sem)
up_write(&mm->mmap_sem);
-
+ kfree(mmu_notifier_mm);
+out:
BUG_ON(atomic_read(&mm->mm_users) <= 0);
return ret;
}
int i;
for_each_online_node(i)
- if (node_distance(nid, i) <= RECLAIM_DISTANCE) {
+ if (node_distance(nid, i) <= RECLAIM_DISTANCE)
node_set(i, NODE_DATA(nid)->reclaim_nodes);
+ else
zone_reclaim_mode = 1;
- }
}
#else /* CONFIG_NUMA */
ret = start_isolate_page_range(pfn_max_align_down(start),
pfn_max_align_up(end), migratetype);
if (ret)
- goto done;
+ return ret;
ret = __alloc_contig_migrate_range(&cc, start, end);
if (ret)
#include <linux/mmu_notifier.h>
#include <linux/migrate.h>
#include <linux/hugetlb.h>
+#include <linux/backing-dev.h>
#include <asm/tlbflush.h>
if (page_mapped(page)) {
struct address_space *mapping = page_mapping(page);
- if (mapping) {
+ if (mapping)
ret = page_mkclean_file(mapping, page);
- if (page_test_and_clear_dirty(page_to_pfn(page), 1))
- ret = 1;
- }
}
return ret;
*/
void page_remove_rmap(struct page *page)
{
+ struct address_space *mapping = page_mapping(page);
bool anon = PageAnon(page);
bool locked;
unsigned long flags;
* this if the page is anon, so about to be freed; but perhaps
* not if it's in swapcache - there might be another pte slot
* containing the swap entry, but page not yet written to swap.
+ *
+ * And we can skip it on file pages, so long as the filesystem
+ * participates in dirty tracking; but need to catch shm and tmpfs
+ * and ramfs pages which have been modified since creation by read
+ * fault.
+ *
+ * Note that mapping must be decided above, before decrementing
+ * mapcount (which luckily provides a barrier): once page is unmapped,
+ * it could be truncated and page->mapping reset to NULL at any moment.
+ * Note also that we are relying on page_mapping(page) to set mapping
+ * to &swapper_space when PageSwapCache(page).
*/
- if ((!anon || PageSwapCache(page)) &&
+ if (mapping && !mapping_cap_account_dirty(mapping) &&
page_test_and_clear_dirty(page_to_pfn(page), 1))
set_page_dirty(page);
/*
case NETDEV_PRE_TYPE_CHANGE:
/* Forbid underlaying device to change its type. */
- return NOTIFY_BAD;
+ if (vlan_uses_dev(dev))
+ return NOTIFY_BAD;
+ break;
case NETDEV_NOTIFY_PEERS:
case NETDEV_BONDING_FAILOVER:
uint16_t crc;
unsigned long entrytime;
+ spin_lock_init(&bat_priv->bla.bcast_duplist_lock);
+
batadv_dbg(BATADV_DBG_BLA, bat_priv, "bla hash registering\n");
/* setting claim destination address */
/**
* batadv_bla_check_bcast_duplist
* @bat_priv: the bat priv with all the soft interface information
- * @bcast_packet: originator mac address
- * @hdr_size: maximum length of the frame
+ * @bcast_packet: encapsulated broadcast frame plus batman header
+ * @bcast_packet_len: length of encapsulated broadcast frame plus batman header
*
* check if it is on our broadcast list. Another gateway might
* have sent the same packet because it is connected to the same backbone,
*/
int batadv_bla_check_bcast_duplist(struct batadv_priv *bat_priv,
struct batadv_bcast_packet *bcast_packet,
- int hdr_size)
+ int bcast_packet_len)
{
- int i, length, curr;
+ int i, length, curr, ret = 0;
uint8_t *content;
uint16_t crc;
struct batadv_bcast_duplist_entry *entry;
- length = hdr_size - sizeof(*bcast_packet);
+ length = bcast_packet_len - sizeof(*bcast_packet);
content = (uint8_t *)bcast_packet;
content += sizeof(*bcast_packet);
/* calculate the crc ... */
crc = crc16(0, content, length);
+ spin_lock_bh(&bat_priv->bla.bcast_duplist_lock);
+
for (i = 0; i < BATADV_DUPLIST_SIZE; i++) {
curr = (bat_priv->bla.bcast_duplist_curr + i);
curr %= BATADV_DUPLIST_SIZE;
/* this entry seems to match: same crc, not too old,
* and from another gw. therefore return 1 to forbid it.
*/
- return 1;
+ ret = 1;
+ goto out;
}
- /* not found, add a new entry (overwrite the oldest entry) */
+ /* not found, add a new entry (overwrite the oldest entry)
+ * and allow it, its the first occurence.
+ */
curr = (bat_priv->bla.bcast_duplist_curr + BATADV_DUPLIST_SIZE - 1);
curr %= BATADV_DUPLIST_SIZE;
entry = &bat_priv->bla.bcast_duplist[curr];
memcpy(entry->orig, bcast_packet->orig, ETH_ALEN);
bat_priv->bla.bcast_duplist_curr = curr;
- /* allow it, its the first occurence. */
- return 0;
+out:
+ spin_unlock_bh(&bat_priv->bla.bcast_duplist_lock);
+
+ return ret;
}
spin_unlock_bh(&orig_node->bcast_seqno_lock);
+ /* keep skb linear for crc calculation */
+ if (skb_linearize(skb) < 0)
+ goto out;
+
+ bcast_packet = (struct batadv_bcast_packet *)skb->data;
+
/* check whether this has been sent by another originator before */
- if (batadv_bla_check_bcast_duplist(bat_priv, bcast_packet, hdr_size))
+ if (batadv_bla_check_bcast_duplist(bat_priv, bcast_packet, skb->len))
goto out;
/* rebroadcast packet */
struct batadv_hashtable *backbone_hash;
struct batadv_bcast_duplist_entry bcast_duplist[BATADV_DUPLIST_SIZE];
int bcast_duplist_curr;
+ /* protects bcast_duplist and bcast_duplist_curr */
+ spinlock_t bcast_duplist_lock;
struct batadv_bla_claim_dst claim_dest;
struct delayed_work work;
};
#define SMP_TIMEOUT msecs_to_jiffies(30000)
+#define AUTH_REQ_MASK 0x07
+
static inline void swap128(u8 src[16], u8 dst[16])
{
int i;
req->max_key_size = SMP_MAX_ENC_KEY_SIZE;
req->init_key_dist = 0;
req->resp_key_dist = dist_keys;
- req->auth_req = authreq;
+ req->auth_req = (authreq & AUTH_REQ_MASK);
return;
}
rsp->max_key_size = SMP_MAX_ENC_KEY_SIZE;
rsp->init_key_dist = 0;
rsp->resp_key_dist = req->resp_key_dist & dist_keys;
- rsp->auth_req = authreq;
+ rsp->auth_req = (authreq & AUTH_REQ_MASK);
}
static u8 check_enc_key_size(struct l2cap_conn *conn, __u8 max_key_size)
mutex_unlock(&con->mutex);
return;
} else {
- con->ops->put(con);
dout("con_work %p FAILED to back off %lu\n", con,
con->delay);
+ set_bit(CON_FLAG_BACKOFF, &con->flags);
}
+ goto done;
}
if (con->state == CON_STATE_STANDBY) {
msg = con->ops->alloc_msg(con, hdr, skip);
mutex_lock(&con->mutex);
if (con->state != CON_STATE_OPEN) {
- ceph_msg_put(msg);
+ if (msg)
+ ceph_msg_put(msg);
return -EAGAIN;
}
con->in_msg = msg;
void kfree_skb_partial(struct sk_buff *skb, bool head_stolen)
{
- if (head_stolen)
+ if (head_stolen) {
+ skb_release_head_state(skb);
kmem_cache_free(skbuff_head_cache, skb);
- else
+ } else {
__kfree_skb(skb);
+ }
}
EXPORT_SYMBOL(kfree_skb_partial);
spin_lock_bh(&fnhe_lock);
if (daddr == fnhe->fnhe_daddr) {
- struct rtable *orig;
-
+ struct rtable *orig = rcu_dereference(fnhe->fnhe_rth);
+ if (orig && rt_is_expired(orig)) {
+ fnhe->fnhe_gw = 0;
+ fnhe->fnhe_pmtu = 0;
+ fnhe->fnhe_expires = 0;
+ }
if (fnhe->fnhe_pmtu) {
unsigned long expires = fnhe->fnhe_expires;
unsigned long diff = expires - jiffies;
} else if (!rt->rt_gateway)
rt->rt_gateway = daddr;
- orig = rcu_dereference(fnhe->fnhe_rth);
rcu_assign_pointer(fnhe->fnhe_rth, rt);
if (orig)
rt_free(orig);
!tp->urg_data ||
before(tp->urg_seq, tp->copied_seq) ||
!before(tp->urg_seq, tp->rcv_nxt)) {
- struct sk_buff *skb;
answ = tp->rcv_nxt - tp->copied_seq;
- /* Subtract 1, if FIN is in queue. */
- skb = skb_peek_tail(&sk->sk_receive_queue);
- if (answ && skb)
- answ -= tcp_hdr(skb)->fin;
+ /* Subtract 1, if FIN was received */
+ if (answ && sock_flag(sk, SOCK_DONE))
+ answ--;
} else
answ = tp->urg_seq - tp->copied_seq;
release_sock(sk);
info->tcpi_options |= TCPI_OPT_ECN;
if (tp->ecn_flags & TCP_ECN_SEEN)
info->tcpi_options |= TCPI_OPT_ECN_SEEN;
+ if (tp->syn_data_acked)
+ info->tcpi_options |= TCPI_OPT_SYN_DATA;
info->tcpi_rto = jiffies_to_usecs(icsk->icsk_rto);
info->tcpi_ato = jiffies_to_usecs(icsk->icsk_ack.ato);
tcp_rearm_rto(sk);
return true;
}
+ tp->syn_data_acked = tp->syn_data;
return false;
}
req = tp->fastopen_rsk;
if (req != NULL) {
- BUG_ON(sk->sk_state != TCP_SYN_RECV &&
+ WARN_ON_ONCE(sk->sk_state != TCP_SYN_RECV &&
sk->sk_state != TCP_FIN_WAIT1);
if (tcp_check_req(sk, skb, req, NULL, true) == NULL)
* ACK we have received, this would have acknowledged
* our SYNACK so stop the SYNACK timer.
*/
- if (acceptable && req != NULL) {
+ if (req != NULL) {
+ /* Return RST if ack_seq is invalid.
+ * Note that RFC793 only says to generate a
+ * DUPACK for it but for TCP Fast Open it seems
+ * better to treat this case like TCP_SYN_RECV
+ * above.
+ */
+ if (!acceptable)
+ return 1;
/* We no longer need the request sock. */
reqsk_fastopen_remove(sk, req, false);
tcp_rearm_rto(sk);
skb_set_owner_r(skb, child);
__skb_queue_tail(&child->sk_receive_queue, skb);
tp->rcv_nxt = TCP_SKB_CB(skb)->end_seq;
+ tp->syn_data_acked = 1;
}
sk->sk_data_ready(sk, 0);
bh_unlock_sock(child);
newtp->rx_opt.mss_clamp = req->mss;
TCP_ECN_openreq_child(newtp, req);
newtp->fastopen_rsk = NULL;
+ newtp->syn_data_acked = 0;
TCP_INC_STATS_BH(sock_net(sk), TCP_MIB_PASSIVEOPENS);
}
return;
}
if (tp->fastopen_rsk) {
- BUG_ON(sk->sk_state != TCP_SYN_RECV &&
- sk->sk_state != TCP_FIN_WAIT1);
+ WARN_ON_ONCE(sk->sk_state != TCP_SYN_RECV &&
+ sk->sk_state != TCP_FIN_WAIT1);
tcp_fastopen_synack_timer(sk);
/* Before we receive ACK to our SYN-ACK don't retransmit
* anything else (e.g., data or FIN segments).
};
static const u32 ip6_template_metrics[RTAX_MAX] = {
- [RTAX_HOPLIMIT - 1] = 255,
+ [RTAX_HOPLIMIT - 1] = 0,
};
static const struct rt6_info ip6_null_entry_template = {
rt->rt6i_dst.addr = fl6->daddr;
rt->rt6i_dst.plen = 128;
rt->rt6i_idev = idev;
- dst_metric_set(&rt->dst, RTAX_HOPLIMIT, 255);
+ dst_metric_set(&rt->dst, RTAX_HOPLIMIT, 0);
spin_lock_bh(&icmp6_dst_lock);
rt->dst.next = icmp6_dst_gc_list;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
if (info->control.vif == &sdata->vif) {
__skb_unlink(skb, &local->pending[i]);
- dev_kfree_skb_irq(skb);
+ ieee80211_free_txskb(&local->hw, skb);
}
}
}
ht_cfreq, ht_oper->primary_chan,
cbss->channel->band);
ht_oper = NULL;
+ } else {
+ channel_type = NL80211_CHAN_HT20;
}
}
- if (ht_oper) {
- channel_type = NL80211_CHAN_HT20;
+ if (ht_oper && sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
+ /*
+ * cfg80211 already verified that the channel itself can
+ * be used, but it didn't check that we can do the right
+ * HT type, so do that here as well. If HT40 isn't allowed
+ * on this channel, disable 40 MHz operation.
+ */
- if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
- switch (ht_oper->ht_param &
- IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
- case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+ switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
+ case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+ if (cbss->channel->flags & IEEE80211_CHAN_NO_HT40PLUS)
+ ifmgd->flags |= IEEE80211_STA_DISABLE_40MHZ;
+ else
channel_type = NL80211_CHAN_HT40PLUS;
- break;
- case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+ break;
+ case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+ if (cbss->channel->flags & IEEE80211_CHAN_NO_HT40MINUS)
+ ifmgd->flags |= IEEE80211_STA_DISABLE_40MHZ;
+ else
channel_type = NL80211_CHAN_HT40MINUS;
- break;
- }
+ break;
}
}
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
+ bool tx = !req->local_state_change;
mutex_lock(&ifmgd->mtx);
if (ifmgd->associated &&
ether_addr_equal(ifmgd->associated->bssid, req->bssid)) {
ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
- req->reason_code, true, frame_buf);
+ req->reason_code, tx, frame_buf);
} else {
drv_mgd_prepare_tx(sdata->local, sdata);
ieee80211_send_deauth_disassoc(sdata, req->bssid,
IEEE80211_STYPE_DEAUTH,
- req->reason_code, true,
+ req->reason_code, tx,
frame_buf);
}
*/
if (!skb)
break;
- dev_kfree_skb(skb);
+ ieee80211_free_txskb(&local->hw, skb);
}
/*
local->total_ps_buffered--;
ps_dbg(sta->sdata, "Buffered frame expired (STA %pM)\n",
sta->sta.addr);
- dev_kfree_skb(skb);
+ ieee80211_free_txskb(&local->hw, skb);
}
/*
int queue = info->hw_queue;
if (WARN_ON(!info->control.vif)) {
- kfree_skb(skb);
+ ieee80211_free_txskb(&local->hw, skb);
return;
}
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
if (WARN_ON(!info->control.vif)) {
- kfree_skb(skb);
+ ieee80211_free_txskb(&local->hw, skb);
continue;
}
if (status->flag & RX_FLAG_MMIC_ERROR)
goto mic_fail;
- if (!(status->flag & RX_FLAG_IV_STRIPPED) && rx->key)
+ if (!(status->flag & RX_FLAG_IV_STRIPPED) && rx->key &&
+ rx->key->conf.cipher == WLAN_CIPHER_SUITE_TKIP)
goto update_iv;
return RX_CONTINUE;
static void bip_aad(struct sk_buff *skb, u8 *aad)
{
+ __le16 mask_fc;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+
/* BIP AAD: FC(masked) || A1 || A2 || A3 */
/* FC type/subtype */
- aad[0] = skb->data[0];
/* Mask FC Retry, PwrMgt, MoreData flags to zero */
- aad[1] = skb->data[1] & ~(BIT(4) | BIT(5) | BIT(6));
+ mask_fc = hdr->frame_control;
+ mask_fc &= ~cpu_to_le16(IEEE80211_FCTL_RETRY | IEEE80211_FCTL_PM |
+ IEEE80211_FCTL_MOREDATA);
+ put_unaligned(mask_fc, (__le16 *) &aad[0]);
/* A1 || A2 || A3 */
- memcpy(aad + 2, skb->data + 4, 3 * ETH_ALEN);
+ memcpy(aad + 2, &hdr->addr1, 3 * ETH_ALEN);
}
struct ip_vs_proto_data *pd;
#endif
+ memset(u, 0, sizeof (*u));
+
#ifdef CONFIG_IP_VS_PROTO_TCP
pd = ip_vs_proto_data_get(net, IPPROTO_TCP);
u->tcp_timeout = pd->timeout_table[IP_VS_TCP_S_ESTABLISHED] / HZ;
{
struct ip_vs_timeout_user t;
- memset(&t, 0, sizeof(t));
__ip_vs_get_timeouts(net, &t);
if (copy_to_user(user, &t, sizeof(t)) != 0)
ret = -EFAULT;
typeof(nf_ct_timeout_find_get_hook) timeout_find_get;
struct ctnl_timeout *timeout;
struct nf_conn_timeout *timeout_ext;
- const struct ipt_entry *e = par->entryinfo;
struct nf_conntrack_l4proto *l4proto;
int ret = 0;
+ u8 proto;
rcu_read_lock();
timeout_find_get = rcu_dereference(nf_ct_timeout_find_get_hook);
goto out;
}
- if (e->ip.invflags & IPT_INV_PROTO) {
+ proto = xt_ct_find_proto(par);
+ if (!proto) {
ret = -EINVAL;
- pr_info("You cannot use inversion on L4 protocol\n");
+ pr_info("You must specify a L4 protocol, and not use "
+ "inversions on it.\n");
goto out;
}
/* Make sure the timeout policy matches any existing protocol tracker,
* otherwise default to generic.
*/
- l4proto = __nf_ct_l4proto_find(par->family, e->ip.proto);
+ l4proto = __nf_ct_l4proto_find(par->family, proto);
if (timeout->l4proto->l4proto != l4proto->l4proto) {
ret = -EINVAL;
pr_info("Timeout policy `%s' can only be used by L4 protocol "
fl4.daddr = info->gw.ip;
fl4.flowi4_tos = RT_TOS(iph->tos);
fl4.flowi4_scope = RT_SCOPE_UNIVERSE;
+ fl4.flowi4_flags = FLOWI_FLAG_KNOWN_NH;
rt = ip_route_output_key(net, &fl4);
if (IS_ERR(rt))
return false;
.family = NFPROTO_IPV4,
.table = "nat",
.hooks = (1 << NF_INET_POST_ROUTING) |
- (1 << NF_INET_LOCAL_OUT),
+ (1 << NF_INET_LOCAL_IN),
.me = THIS_MODULE,
},
{
.family = NFPROTO_IPV4,
.table = "nat",
.hooks = (1 << NF_INET_PRE_ROUTING) |
- (1 << NF_INET_LOCAL_IN),
+ (1 << NF_INET_LOCAL_OUT),
.me = THIS_MODULE,
},
{
.targetsize = sizeof(struct nf_nat_range),
.table = "nat",
.hooks = (1 << NF_INET_POST_ROUTING) |
- (1 << NF_INET_LOCAL_OUT),
+ (1 << NF_INET_LOCAL_IN),
.me = THIS_MODULE,
},
{
.targetsize = sizeof(struct nf_nat_range),
.table = "nat",
.hooks = (1 << NF_INET_PRE_ROUTING) |
- (1 << NF_INET_LOCAL_IN),
+ (1 << NF_INET_LOCAL_OUT),
.me = THIS_MODULE,
},
};
static DEFINE_RWLOCK(nl_table_lock);
static atomic_t nl_table_users = ATOMIC_INIT(0);
+#define nl_deref_protected(X) rcu_dereference_protected(X, lockdep_is_held(&nl_table_lock));
+
static ATOMIC_NOTIFIER_HEAD(netlink_chain);
static inline u32 netlink_group_mask(u32 group)
struct hlist_node *node;
unsigned long mask;
unsigned int i;
+ struct listeners *listeners;
+
+ listeners = nl_deref_protected(tbl->listeners);
+ if (!listeners)
+ return;
for (i = 0; i < NLGRPLONGS(tbl->groups); i++) {
mask = 0;
if (i < NLGRPLONGS(nlk_sk(sk)->ngroups))
mask |= nlk_sk(sk)->groups[i];
}
- tbl->listeners->masks[i] = mask;
+ listeners->masks[i] = mask;
}
/* this function is only called with the netlink table "grabbed", which
* makes sure updates are visible before bind or setsockopt return. */
if (netlink_is_kernel(sk)) {
BUG_ON(nl_table[sk->sk_protocol].registered == 0);
if (--nl_table[sk->sk_protocol].registered == 0) {
- kfree(nl_table[sk->sk_protocol].listeners);
+ struct listeners *old;
+
+ old = nl_deref_protected(nl_table[sk->sk_protocol].listeners);
+ RCU_INIT_POINTER(nl_table[sk->sk_protocol].listeners, NULL);
+ kfree_rcu(old, rcu);
nl_table[sk->sk_protocol].module = NULL;
nl_table[sk->sk_protocol].bind = NULL;
nl_table[sk->sk_protocol].flags = 0;
rcu_read_lock();
listeners = rcu_dereference(nl_table[sk->sk_protocol].listeners);
- if (group - 1 < nl_table[sk->sk_protocol].groups)
+ if (listeners && group - 1 < nl_table[sk->sk_protocol].groups)
res = test_bit(group - 1, listeners->masks);
rcu_read_unlock();
new = kzalloc(sizeof(*new) + NLGRPSZ(groups), GFP_ATOMIC);
if (!new)
return -ENOMEM;
- old = rcu_dereference_protected(tbl->listeners, 1);
+ old = nl_deref_protected(tbl->listeners);
memcpy(new->masks, old->masks, NLGRPSZ(tbl->groups));
rcu_assign_pointer(tbl->listeners, new);
void (*old_data_ready)(struct sock *, int);
void (*old_state_change)(struct sock *);
void (*old_write_space)(struct sock *);
- void (*old_error_report)(struct sock *);
};
/*
dprintk("RPC: sendmsg returned unrecognized error %d\n",
-status);
case -ECONNRESET:
- case -EPIPE:
xs_tcp_shutdown(xprt);
case -ECONNREFUSED:
case -ENOTCONN:
+ case -EPIPE:
clear_bit(SOCK_ASYNC_NOSPACE, &transport->sock->flags);
}
transport->old_data_ready = sk->sk_data_ready;
transport->old_state_change = sk->sk_state_change;
transport->old_write_space = sk->sk_write_space;
- transport->old_error_report = sk->sk_error_report;
}
static void xs_restore_old_callbacks(struct sock_xprt *transport, struct sock *sk)
sk->sk_data_ready = transport->old_data_ready;
sk->sk_state_change = transport->old_state_change;
sk->sk_write_space = transport->old_write_space;
- sk->sk_error_report = transport->old_error_report;
}
static void xs_reset_transport(struct sock_xprt *transport)
xprt_clear_connecting(xprt);
}
-static void xs_sock_mark_closed(struct rpc_xprt *xprt)
+static void xs_sock_reset_connection_flags(struct rpc_xprt *xprt)
{
smp_mb__before_clear_bit();
clear_bit(XPRT_CONNECTION_ABORT, &xprt->state);
clear_bit(XPRT_CLOSE_WAIT, &xprt->state);
clear_bit(XPRT_CLOSING, &xprt->state);
smp_mb__after_clear_bit();
+}
+
+static void xs_sock_mark_closed(struct rpc_xprt *xprt)
+{
+ xs_sock_reset_connection_flags(xprt);
/* Mark transport as closed and wake up all pending tasks */
xprt_disconnect_done(xprt);
}
case TCP_CLOSE_WAIT:
/* The server initiated a shutdown of the socket */
xprt->connect_cookie++;
+ clear_bit(XPRT_CONNECTED, &xprt->state);
xs_tcp_force_close(xprt);
case TCP_CLOSING:
/*
read_unlock_bh(&sk->sk_callback_lock);
}
-/**
- * xs_error_report - callback mainly for catching socket errors
- * @sk: socket
- */
-static void xs_error_report(struct sock *sk)
-{
- struct rpc_xprt *xprt;
-
- read_lock_bh(&sk->sk_callback_lock);
- if (!(xprt = xprt_from_sock(sk)))
- goto out;
- dprintk("RPC: %s client %p...\n"
- "RPC: error %d\n",
- __func__, xprt, sk->sk_err);
- xprt_wake_pending_tasks(xprt, -EAGAIN);
-out:
- read_unlock_bh(&sk->sk_callback_lock);
-}
-
static void xs_write_space(struct sock *sk)
{
struct socket *sock;
sk->sk_user_data = xprt;
sk->sk_data_ready = xs_local_data_ready;
sk->sk_write_space = xs_udp_write_space;
- sk->sk_error_report = xs_error_report;
sk->sk_allocation = GFP_ATOMIC;
xprt_clear_connected(xprt);
sk->sk_user_data = xprt;
sk->sk_data_ready = xs_udp_data_ready;
sk->sk_write_space = xs_udp_write_space;
- sk->sk_error_report = xs_error_report;
sk->sk_no_check = UDP_CSUM_NORCV;
sk->sk_allocation = GFP_ATOMIC;
any.sa_family = AF_UNSPEC;
result = kernel_connect(transport->sock, &any, sizeof(any), 0);
if (!result)
- xs_sock_mark_closed(&transport->xprt);
- else
- dprintk("RPC: AF_UNSPEC connect return code %d\n",
- result);
+ xs_sock_reset_connection_flags(&transport->xprt);
+ dprintk("RPC: AF_UNSPEC connect return code %d\n", result);
}
static void xs_tcp_reuse_connection(struct sock_xprt *transport)
sk->sk_data_ready = xs_tcp_data_ready;
sk->sk_state_change = xs_tcp_state_change;
sk->sk_write_space = xs_tcp_write_space;
- sk->sk_error_report = xs_error_report;
sk->sk_allocation = GFP_ATOMIC;
/* socket options */
.reason_code = reason,
.ie = ie,
.ie_len = ie_len,
+ .local_state_change = local_state_change,
};
ASSERT_WDEV_LOCK(wdev);
- if (local_state_change) {
- if (wdev->current_bss &&
- ether_addr_equal(wdev->current_bss->pub.bssid, bssid)) {
- cfg80211_unhold_bss(wdev->current_bss);
- cfg80211_put_bss(&wdev->current_bss->pub);
- wdev->current_bss = NULL;
- }
-
+ if (local_state_change && (!wdev->current_bss ||
+ !ether_addr_equal(wdev->current_bss->pub.bssid, bssid)))
return 0;
- }
return rdev->ops->deauth(&rdev->wiphy, dev, &req);
}
*/
static void free_profile(struct aa_profile *profile)
{
+ struct aa_profile *p;
+
AA_DEBUG("%s(%p)\n", __func__, profile);
if (!profile)
aa_put_dfa(profile->xmatch);
aa_put_dfa(profile->policy.dfa);
- aa_put_profile(profile->replacedby);
+ /* put the profile reference for replacedby, but not via
+ * put_profile(kref_put).
+ * replacedby can form a long chain that can result in cascading
+ * frees that blows the stack because kref_put makes a nested fn
+ * call (it looks like recursion, with free_profile calling
+ * free_profile) for each profile in the chain lp#1056078.
+ */
+ for (p = profile->replacedby; p; ) {
+ if (atomic_dec_and_test(&p->base.count.refcount)) {
+ /* no more refs on p, grab its replacedby */
+ struct aa_profile *next = p->replacedby;
+ /* break the chain */
+ p->replacedby = NULL;
+ /* now free p, chain is broken */
+ free_profile(p);
+
+ /* follow up with next profile in the chain */
+ p = next;
+ } else
+ break;
+ }
kzfree(profile);
}
struct dev_cgroup {
struct cgroup_subsys_state css;
struct list_head exceptions;
- bool deny_all;
+ enum {
+ DEVCG_DEFAULT_ALLOW,
+ DEVCG_DEFAULT_DENY,
+ } behavior;
};
static inline struct dev_cgroup *css_to_devcgroup(struct cgroup_subsys_state *s)
parent_cgroup = cgroup->parent;
if (parent_cgroup == NULL)
- dev_cgroup->deny_all = false;
+ dev_cgroup->behavior = DEVCG_DEFAULT_ALLOW;
else {
parent_dev_cgroup = cgroup_to_devcgroup(parent_cgroup);
mutex_lock(&devcgroup_mutex);
ret = dev_exceptions_copy(&dev_cgroup->exceptions,
&parent_dev_cgroup->exceptions);
- dev_cgroup->deny_all = parent_dev_cgroup->deny_all;
+ dev_cgroup->behavior = parent_dev_cgroup->behavior;
mutex_unlock(&devcgroup_mutex);
if (ret) {
kfree(dev_cgroup);
* - List the exceptions in case the default policy is to deny
* This way, the file remains as a "whitelist of devices"
*/
- if (devcgroup->deny_all == false) {
+ if (devcgroup->behavior == DEVCG_DEFAULT_ALLOW) {
set_access(acc, ACC_MASK);
set_majmin(maj, ~0);
set_majmin(min, ~0);
* In two cases we'll consider this new exception valid:
* - the dev cgroup has its default policy to allow + exception list:
* the new exception should *not* match any of the exceptions
- * (!deny_all, !match)
+ * (behavior == DEVCG_DEFAULT_ALLOW, !match)
* - the dev cgroup has its default policy to deny + exception list:
* the new exception *should* match the exceptions
- * (deny_all, match)
+ * (behavior == DEVCG_DEFAULT_DENY, match)
*/
- if (dev_cgroup->deny_all == match)
+ if ((dev_cgroup->behavior == DEVCG_DEFAULT_DENY) == match)
return 1;
return 0;
}
return may_access(parent, ex);
}
+/**
+ * may_allow_all - checks if it's possible to change the behavior to
+ * allow based on parent's rules.
+ * @parent: device cgroup's parent
+ * returns: != 0 in case it's allowed, 0 otherwise
+ */
+static inline int may_allow_all(struct dev_cgroup *parent)
+{
+ return parent->behavior == DEVCG_DEFAULT_ALLOW;
+}
+
/*
* Modify the exception list using allow/deny rules.
* CAP_SYS_ADMIN is needed for this. It's at least separate from CAP_MKNOD
int filetype, const char *buffer)
{
const char *b;
- char *endp;
- int count;
+ char temp[12]; /* 11 + 1 characters needed for a u32 */
+ int count, rc;
struct dev_exception_item ex;
+ struct cgroup *p = devcgroup->css.cgroup;
+ struct dev_cgroup *parent = cgroup_to_devcgroup(p->parent);
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
case 'a':
switch (filetype) {
case DEVCG_ALLOW:
- if (!parent_has_perm(devcgroup, &ex))
+ if (!may_allow_all(parent))
return -EPERM;
dev_exception_clean(devcgroup);
- devcgroup->deny_all = false;
+ rc = dev_exceptions_copy(&devcgroup->exceptions,
+ &parent->exceptions);
+ if (rc)
+ return rc;
+ devcgroup->behavior = DEVCG_DEFAULT_ALLOW;
break;
case DEVCG_DENY:
dev_exception_clean(devcgroup);
- devcgroup->deny_all = true;
+ devcgroup->behavior = DEVCG_DEFAULT_DENY;
break;
default:
return -EINVAL;
ex.major = ~0;
b++;
} else if (isdigit(*b)) {
- ex.major = simple_strtoul(b, &endp, 10);
- b = endp;
+ memset(temp, 0, sizeof(temp));
+ for (count = 0; count < sizeof(temp) - 1; count++) {
+ temp[count] = *b;
+ b++;
+ if (!isdigit(*b))
+ break;
+ }
+ rc = kstrtou32(temp, 10, &ex.major);
+ if (rc)
+ return -EINVAL;
} else {
return -EINVAL;
}
ex.minor = ~0;
b++;
} else if (isdigit(*b)) {
- ex.minor = simple_strtoul(b, &endp, 10);
- b = endp;
+ memset(temp, 0, sizeof(temp));
+ for (count = 0; count < sizeof(temp) - 1; count++) {
+ temp[count] = *b;
+ b++;
+ if (!isdigit(*b))
+ break;
+ }
+ rc = kstrtou32(temp, 10, &ex.minor);
+ if (rc)
+ return -EINVAL;
} else {
return -EINVAL;
}
* an matching exception instead. And be silent about it: we
* don't want to break compatibility
*/
- if (devcgroup->deny_all == false) {
+ if (devcgroup->behavior == DEVCG_DEFAULT_ALLOW) {
dev_exception_rm(devcgroup, &ex);
return 0;
}
* an matching exception instead. And be silent about it: we
* don't want to break compatibility
*/
- if (devcgroup->deny_all == true) {
+ if (devcgroup->behavior == DEVCG_DEFAULT_DENY) {
dev_exception_rm(devcgroup, &ex);
return 0;
}
*
* returns 0 on success, -EPERM case the operation is not permitted
*/
-static int __devcgroup_check_permission(struct dev_cgroup *dev_cgroup,
- short type, u32 major, u32 minor,
+static int __devcgroup_check_permission(short type, u32 major, u32 minor,
short access)
{
+ struct dev_cgroup *dev_cgroup;
struct dev_exception_item ex;
int rc;
ex.access = access;
rcu_read_lock();
+ dev_cgroup = task_devcgroup(current);
rc = may_access(dev_cgroup, &ex);
rcu_read_unlock();
int __devcgroup_inode_permission(struct inode *inode, int mask)
{
- struct dev_cgroup *dev_cgroup = task_devcgroup(current);
short type, access = 0;
if (S_ISBLK(inode->i_mode))
if (mask & MAY_READ)
access |= ACC_READ;
- return __devcgroup_check_permission(dev_cgroup, type, imajor(inode),
- iminor(inode), access);
+ return __devcgroup_check_permission(type, imajor(inode), iminor(inode),
+ access);
}
int devcgroup_inode_mknod(int mode, dev_t dev)
{
- struct dev_cgroup *dev_cgroup = task_devcgroup(current);
short type;
if (!S_ISBLK(mode) && !S_ISCHR(mode))
else
type = DEV_CHAR;
- return __devcgroup_check_permission(dev_cgroup, type, MAJOR(dev),
- MINOR(dev), ACC_MKNOD);
+ return __devcgroup_check_permission(type, MAJOR(dev), MINOR(dev),
+ ACC_MKNOD);
}
error = snd_card_miro_aci_detect(card, miro);
if (error < 0) {
- snd_card_free(card);
snd_printk(KERN_ERR "unable to detect aci chip\n");
return -ENODEV;
}
struct snd_als300_substream_data *data = kzalloc(sizeof(*data),
GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
snd_als300_dbgcallenter();
chip->playback_substream = substream;
runtime->hw = snd_als300_playback_hw;
struct snd_als300_substream_data *data = kzalloc(sizeof(*data),
GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
snd_als300_dbgcallenter();
chip->capture_substream = substream;
runtime->hw = snd_als300_capture_hw;
enum {
ALC268_FIXUP_INV_DMIC,
+ ALC268_FIXUP_HP_EAPD,
};
static const struct alc_fixup alc268_fixups[] = {
.type = ALC_FIXUP_FUNC,
.v.func = alc_fixup_inv_dmic_0x12,
},
+ [ALC268_FIXUP_HP_EAPD] = {
+ .type = ALC_FIXUP_VERBS,
+ .v.verbs = (const struct hda_verb[]) {
+ {0x15, AC_VERB_SET_EAPD_BTLENABLE, 0},
+ {}
+ }
+ },
};
static const struct alc_model_fixup alc268_fixup_models[] = {
{.id = ALC268_FIXUP_INV_DMIC, .name = "inv-dmic"},
+ {.id = ALC268_FIXUP_HP_EAPD, .name = "hp-eapd"},
+ {}
+};
+
+static const struct snd_pci_quirk alc268_fixup_tbl[] = {
+ /* below is codec SSID since multiple Toshiba laptops have the
+ * same PCI SSID 1179:ff00
+ */
+ SND_PCI_QUIRK(0x1179, 0xff06, "Toshiba P200", ALC268_FIXUP_HP_EAPD),
{}
};
spec = codec->spec;
- alc_pick_fixup(codec, alc268_fixup_models, NULL, alc268_fixups);
+ alc_pick_fixup(codec, alc268_fixup_models, alc268_fixup_tbl, alc268_fixups);
alc_apply_fixup(codec, ALC_FIXUP_ACT_PRE_PROBE);
/* automatic parse from the BIOS config */
SND_PCI_QUIRK(0x17aa, 0x21e9, "Thinkpad Edge 15", ALC269_FIXUP_SKU_IGNORE),
SND_PCI_QUIRK(0x17aa, 0x21f6, "Thinkpad T530", ALC269_FIXUP_LENOVO_DOCK),
SND_PCI_QUIRK(0x17aa, 0x21fa, "Thinkpad X230", ALC269_FIXUP_LENOVO_DOCK),
+ SND_PCI_QUIRK(0x17aa, 0x21f3, "Thinkpad T430", ALC269_FIXUP_LENOVO_DOCK),
SND_PCI_QUIRK(0x17aa, 0x21fb, "Thinkpad T430s", ALC269_FIXUP_LENOVO_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2203, "Thinkpad X230 Tablet", ALC269_FIXUP_LENOVO_DOCK),
SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_PCM_44K),
static int hdspm_update_simple_mixer_controls(struct hdspm *hdspm);
static int hdspm_autosync_ref(struct hdspm *hdspm);
static int snd_hdspm_set_defaults(struct hdspm *hdspm);
+static int hdspm_system_clock_mode(struct hdspm *hdspm);
static void hdspm_set_sgbuf(struct hdspm *hdspm,
struct snd_pcm_substream *substream,
unsigned int reg, int channels);
rate = hdspm_calc_dds_value(hdspm, period);
if (rate > 207000) {
- /* Unreasonable high sample rate as seen on PCI MADI cards.
- * Use the cached value instead.
- */
- rate = hdspm->system_sample_rate;
+ /* Unreasonable high sample rate as seen on PCI MADI cards. */
+ if (0 == hdspm_system_clock_mode(hdspm)) {
+ /* master mode, return internal sample rate */
+ rate = hdspm->system_sample_rate;
+ } else {
+ /* slave mode, return external sample rate */
+ rate = hdspm_external_sample_rate(hdspm);
+ }
}
return rate;
#define HDSPM_SYSTEM_SAMPLE_RATE(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = xindex, \
- .access = SNDRV_CTL_ELEM_ACCESS_READ, \
- .info = snd_hdspm_info_system_sample_rate, \
- .get = snd_hdspm_get_system_sample_rate \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .index = xindex, \
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |\
+ SNDRV_CTL_ELEM_ACCESS_VOLATILE, \
+ .info = snd_hdspm_info_system_sample_rate, \
+ .put = snd_hdspm_put_system_sample_rate, \
+ .get = snd_hdspm_get_system_sample_rate \
}
static int snd_hdspm_info_system_sample_rate(struct snd_kcontrol *kcontrol,
return 0;
}
+static int snd_hdspm_put_system_sample_rate(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *
+ ucontrol)
+{
+ struct hdspm *hdspm = snd_kcontrol_chip(kcontrol);
+
+ hdspm_set_dds_value(hdspm, ucontrol->value.enumerated.item[0]);
+ return 0;
+}
+
/**
* Returns the WordClock sample rate class for the given card.
hdspm_get_s1_sample_rate(hdspm,
kcontrol->private_value-1);
}
+ break;
case AIO:
switch (kcontrol->private_value) {
hdspm_get_s1_sample_rate(hdspm,
ucontrol->id.index-1);
}
+ break;
case AES32:
hdspm_get_s1_sample_rate(hdspm,
kcontrol->private_value-1);
break;
+ }
+ break;
+ case MADI:
+ case MADIface:
+ {
+ int rate = hdspm_external_sample_rate(hdspm);
+ int i, selected_rate = 0;
+ for (i = 1; i < 10; i++)
+ if (HDSPM_bit2freq(i) == rate) {
+ selected_rate = i;
+ break;
+ }
+ ucontrol->value.enumerated.item[0] = selected_rate;
}
+ break;
+
default:
break;
}
#define HDSPM_PREF_SYNC_REF(xname, xindex) \
-{.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
.name = xname, \
.index = xindex, \
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |\
#define HDSPM_AUTOSYNC_REF(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = xindex, \
- .access = SNDRV_CTL_ELEM_ACCESS_READ, \
- .info = snd_hdspm_info_autosync_ref, \
- .get = snd_hdspm_get_autosync_ref, \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .index = xindex, \
+ .access = SNDRV_CTL_ELEM_ACCESS_READ, \
+ .info = snd_hdspm_info_autosync_ref, \
+ .get = snd_hdspm_get_autosync_ref, \
}
static int hdspm_autosync_ref(struct hdspm *hdspm)
#define HDSPM_LINE_OUT(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = xindex, \
- .info = snd_hdspm_info_line_out, \
- .get = snd_hdspm_get_line_out, \
- .put = snd_hdspm_put_line_out \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .index = xindex, \
+ .info = snd_hdspm_info_line_out, \
+ .get = snd_hdspm_get_line_out, \
+ .put = snd_hdspm_put_line_out \
}
static int hdspm_line_out(struct hdspm * hdspm)
#define HDSPM_TX_64(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = xindex, \
- .info = snd_hdspm_info_tx_64, \
- .get = snd_hdspm_get_tx_64, \
- .put = snd_hdspm_put_tx_64 \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .index = xindex, \
+ .info = snd_hdspm_info_tx_64, \
+ .get = snd_hdspm_get_tx_64, \
+ .put = snd_hdspm_put_tx_64 \
}
static int hdspm_tx_64(struct hdspm * hdspm)
#define HDSPM_C_TMS(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = xindex, \
- .info = snd_hdspm_info_c_tms, \
- .get = snd_hdspm_get_c_tms, \
- .put = snd_hdspm_put_c_tms \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .index = xindex, \
+ .info = snd_hdspm_info_c_tms, \
+ .get = snd_hdspm_get_c_tms, \
+ .put = snd_hdspm_put_c_tms \
}
static int hdspm_c_tms(struct hdspm * hdspm)
#define HDSPM_SAFE_MODE(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = xindex, \
- .info = snd_hdspm_info_safe_mode, \
- .get = snd_hdspm_get_safe_mode, \
- .put = snd_hdspm_put_safe_mode \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .index = xindex, \
+ .info = snd_hdspm_info_safe_mode, \
+ .get = snd_hdspm_get_safe_mode, \
+ .put = snd_hdspm_put_safe_mode \
}
static int hdspm_safe_mode(struct hdspm * hdspm)
#define HDSPM_EMPHASIS(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = xindex, \
- .info = snd_hdspm_info_emphasis, \
- .get = snd_hdspm_get_emphasis, \
- .put = snd_hdspm_put_emphasis \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .index = xindex, \
+ .info = snd_hdspm_info_emphasis, \
+ .get = snd_hdspm_get_emphasis, \
+ .put = snd_hdspm_put_emphasis \
}
static int hdspm_emphasis(struct hdspm * hdspm)
#define HDSPM_DOLBY(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = xindex, \
- .info = snd_hdspm_info_dolby, \
- .get = snd_hdspm_get_dolby, \
- .put = snd_hdspm_put_dolby \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .index = xindex, \
+ .info = snd_hdspm_info_dolby, \
+ .get = snd_hdspm_get_dolby, \
+ .put = snd_hdspm_put_dolby \
}
static int hdspm_dolby(struct hdspm * hdspm)
#define HDSPM_PROFESSIONAL(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = xindex, \
- .info = snd_hdspm_info_professional, \
- .get = snd_hdspm_get_professional, \
- .put = snd_hdspm_put_professional \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .index = xindex, \
+ .info = snd_hdspm_info_professional, \
+ .get = snd_hdspm_get_professional, \
+ .put = snd_hdspm_put_professional \
}
static int hdspm_professional(struct hdspm * hdspm)
}
#define HDSPM_INPUT_SELECT(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = xindex, \
- .info = snd_hdspm_info_input_select, \
- .get = snd_hdspm_get_input_select, \
- .put = snd_hdspm_put_input_select \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .index = xindex, \
+ .info = snd_hdspm_info_input_select, \
+ .get = snd_hdspm_get_input_select, \
+ .put = snd_hdspm_put_input_select \
}
static int hdspm_input_select(struct hdspm * hdspm)
#define HDSPM_DS_WIRE(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = xindex, \
- .info = snd_hdspm_info_ds_wire, \
- .get = snd_hdspm_get_ds_wire, \
- .put = snd_hdspm_put_ds_wire \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .index = xindex, \
+ .info = snd_hdspm_info_ds_wire, \
+ .get = snd_hdspm_get_ds_wire, \
+ .put = snd_hdspm_put_ds_wire \
}
static int hdspm_ds_wire(struct hdspm * hdspm)
#define HDSPM_QS_WIRE(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = xindex, \
- .info = snd_hdspm_info_qs_wire, \
- .get = snd_hdspm_get_qs_wire, \
- .put = snd_hdspm_put_qs_wire \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .index = xindex, \
+ .info = snd_hdspm_info_qs_wire, \
+ .get = snd_hdspm_get_qs_wire, \
+ .put = snd_hdspm_put_qs_wire \
}
static int hdspm_qs_wire(struct hdspm * hdspm)
}
#define HDSPM_MIXER(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \
- .name = xname, \
- .index = xindex, \
- .device = 0, \
- .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \
- SNDRV_CTL_ELEM_ACCESS_VOLATILE, \
- .info = snd_hdspm_info_mixer, \
- .get = snd_hdspm_get_mixer, \
- .put = snd_hdspm_put_mixer \
+{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \
+ .name = xname, \
+ .index = xindex, \
+ .device = 0, \
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \
+ SNDRV_CTL_ELEM_ACCESS_VOLATILE, \
+ .info = snd_hdspm_info_mixer, \
+ .get = snd_hdspm_get_mixer, \
+ .put = snd_hdspm_put_mixer \
}
static int snd_hdspm_info_mixer(struct snd_kcontrol *kcontrol,
*/
#define HDSPM_PLAYBACK_MIXER \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_WRITE | \
- SNDRV_CTL_ELEM_ACCESS_VOLATILE, \
- .info = snd_hdspm_info_playback_mixer, \
- .get = snd_hdspm_get_playback_mixer, \
- .put = snd_hdspm_put_playback_mixer \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_WRITE | \
+ SNDRV_CTL_ELEM_ACCESS_VOLATILE, \
+ .info = snd_hdspm_info_playback_mixer, \
+ .get = snd_hdspm_get_playback_mixer, \
+ .put = snd_hdspm_put_playback_mixer \
}
static int snd_hdspm_info_playback_mixer(struct snd_kcontrol *kcontrol,
break;
case MADI:
- case AES32:
- status = hdspm_read(hdspm, HDSPM_statusRegister2);
+ status = hdspm_read(hdspm, HDSPM_statusRegister);
lock = (status & HDSPM_syncInLock) ? 1 : 0;
sync = (status & HDSPM_syncInSync) ? 1 : 0;
break;
+ case AES32:
+ status = hdspm_read(hdspm, HDSPM_statusRegister2);
+ lock = (status & 0x100000) ? 1 : 0;
+ sync = (status & 0x200000) ? 1 : 0;
+ break;
+
case MADIface:
break;
}
default:
val = hdspm_s1_sync_check(hdspm, ucontrol->id.index-1);
}
+ break;
case AIO:
switch (kcontrol->private_value) {
default:
val = hdspm_s1_sync_check(hdspm, ucontrol->id.index-1);
}
+ break;
case MADI:
switch (kcontrol->private_value) {
case 3: /* SYNC_IN */
val = hdspm_sync_in_sync_check(hdspm); break;
}
+ break;
case MADIface:
val = hdspm_madi_sync_check(hdspm); /* MADI */
val = hdspm_aes_sync_check(hdspm,
kcontrol->private_value-1);
}
+ break;
}
HDSPM_PREF_SYNC_REF("Preferred Sync Reference", 0),
HDSPM_AUTOSYNC_REF("AutoSync Reference", 0),
HDSPM_SYSTEM_SAMPLE_RATE("System Sample Rate", 0),
+ HDSPM_AUTOSYNC_SAMPLE_RATE("External Rate", 0),
HDSPM_SYNC_CHECK("WC SyncCheck", 0),
HDSPM_SYNC_CHECK("MADI SyncCheck", 1),
- HDSPM_SYNC_CHECK("TCO SyncCHeck", 2),
+ HDSPM_SYNC_CHECK("TCO SyncCheck", 2),
HDSPM_SYNC_CHECK("SYNC IN SyncCheck", 3),
HDSPM_LINE_OUT("Line Out", 0),
HDSPM_TX_64("TX 64 channels mode", 0),
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
+ struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
struct wm8994 *control = codec->control_data;
int mask = WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA;
int i;
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
+ /* Don't enable timeslot 2 if not in use */
+ if (wm8994->channels[0] <= 2)
+ mask &= ~(WM8994_AIF1DAC2L_ENA | WM8994_AIF1DAC2R_ENA);
+
val = snd_soc_read(codec, WM8994_AIF1_CONTROL_1);
if ((val & WM8994_AIF1ADCL_SRC) &&
(val & WM8994_AIF1ADCR_SRC))
return -EINVAL;
}
- bclk_rate = params_rate(params) * 4;
+ bclk_rate = params_rate(params);
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
bclk_rate *= 16;
return -EINVAL;
}
+ wm8994->channels[id] = params_channels(params);
+ switch (params_channels(params)) {
+ case 1:
+ case 2:
+ bclk_rate *= 2;
+ break;
+ default:
+ bclk_rate *= 4;
+ break;
+ }
+
/* Try to find an appropriate sample rate; look for an exact match. */
for (i = 0; i < ARRAY_SIZE(srs); i++)
if (srs[i].rate == params_rate(params))
int sysclk_rate[2];
int mclk[2];
int aifclk[2];
+ int channels[2];
struct wm8994_fll_config fll[2], fll_suspend[2];
struct completion fll_locked[2];
bool fll_locked_irq;
.num_links = ARRAY_SIZE(mop500_dai_links),
};
+static void mop500_of_node_put(void)
+{
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ if (mop500_dai_links[i].cpu_of_node)
+ of_node_put((struct device_node *)
+ mop500_dai_links[i].cpu_of_node);
+ if (mop500_dai_links[i].codec_of_node)
+ of_node_put((struct device_node *)
+ mop500_dai_links[i].codec_of_node);
+ }
+}
+
static int __devinit mop500_of_probe(struct platform_device *pdev,
struct device_node *np)
{
if (!(msp_np[0] && msp_np[1] && codec_np)) {
dev_err(&pdev->dev, "Phandle missing or invalid\n");
+ mop500_of_node_put();
return -EINVAL;
}
return 0;
}
+
static int __devinit mop500_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
snd_soc_unregister_card(mop500_card);
mop500_ab8500_remove(mop500_card);
+ mop500_of_node_put();
return 0;
}
#include <linux/pinctrl/consumer.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/io.h>
#include <linux/of.h>
#include <mach/hardware.h>
platform_data = devm_kzalloc(&pdev->dev,
sizeof(struct msp_i2s_platform_data), GFP_KERNEL);
if (!platform_data)
- ret = -ENOMEM;
+ return -ENOMEM;
}
} else
if (!platform_data)
- ret = -EINVAL;
-
- if (ret)
- goto err_res;
+ return -EINVAL;
dev_dbg(&pdev->dev, "%s: Enter (name: %s, id: %d).\n", __func__,
pdev->name, platform_data->id);
int cmd_help(int argc, const char **argv, const char *prefix __maybe_unused)
{
bool show_all = false;
- enum help_format help_format = HELP_FORMAT_NONE;
+ enum help_format help_format = HELP_FORMAT_MAN;
struct option builtin_help_options[] = {
OPT_BOOLEAN('a', "all", &show_all, "print all available commands"),
OPT_SET_UINT('m', "man", &help_format, "show man page", HELP_FORMAT_MAN),
{
char tp_name[128];
struct syscall *sc;
+ const char *name = audit_syscall_to_name(id, trace->audit_machine);
+
+ if (name == NULL)
+ return -1;
if (id > trace->syscalls.max) {
struct syscall *nsyscalls = realloc(trace->syscalls.table, (id + 1) * sizeof(*sc));
}
sc = trace->syscalls.table + id;
- sc->name = audit_syscall_to_name(id, trace->audit_machine);
- if (sc->name == NULL)
- return -1;
-
- sc->fmt = syscall_fmt__find(sc->name);
+ sc->name = name;
+ sc->fmt = syscall_fmt__find(sc->name);
snprintf(tp_name, sizeof(tp_name), "sys_enter_%s", sc->name);
sc->tp_format = event_format__new("syscalls", tp_name);
if (evlist->threads->map[0] == -1 || evlist->threads->nr > 1)
printf("%d ", sample.tid);
+ if (sample.raw_data == NULL) {
+ printf("%s sample with no payload for tid: %d, cpu %d, raw_size=%d, skipping...\n",
+ perf_evsel__name(evsel), sample.tid,
+ sample.cpu, sample.raw_size);
+ continue;
+ }
+
handler = evsel->handler.func;
handler(trace, evsel, &sample);
}
TEST_ASSERT_VAL("wrong exclude_user", !evsel->attr.exclude_user);
TEST_ASSERT_VAL("wrong exclude_kernel", evsel->attr.exclude_kernel);
TEST_ASSERT_VAL("wrong exclude_hv", evsel->attr.exclude_hv);
- TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest);
+ /* use of precise requires exclude_guest */
+ TEST_ASSERT_VAL("wrong exclude guest", evsel->attr.exclude_guest);
TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host);
TEST_ASSERT_VAL("wrong precise_ip", evsel->attr.precise_ip == 2);
TEST_ASSERT_VAL("wrong leader", evsel->leader == leader);
TEST_ASSERT_VAL("wrong exclude_user", evsel->attr.exclude_user);
TEST_ASSERT_VAL("wrong exclude_kernel", !evsel->attr.exclude_kernel);
TEST_ASSERT_VAL("wrong exclude_hv", evsel->attr.exclude_hv);
- TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest);
+ /* use of precise requires exclude_guest */
+ TEST_ASSERT_VAL("wrong exclude guest", evsel->attr.exclude_guest);
TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host);
TEST_ASSERT_VAL("wrong precise_ip", evsel->attr.precise_ip == 3);
TEST_ASSERT_VAL("wrong leader", evsel->leader == leader);
TEST_ASSERT_VAL("wrong exclude_user", !evsel->attr.exclude_user);
TEST_ASSERT_VAL("wrong exclude_kernel", evsel->attr.exclude_kernel);
TEST_ASSERT_VAL("wrong exclude_hv", evsel->attr.exclude_hv);
- TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest);
+ /* use of precise requires exclude_guest */
+ TEST_ASSERT_VAL("wrong exclude guest", evsel->attr.exclude_guest);
TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host);
TEST_ASSERT_VAL("wrong precise_ip", evsel->attr.precise_ip == 1);
TEST_ASSERT_VAL("wrong group name", !evsel->group_name);
TEST_ASSERT_VAL("wrong exclude_user", evsel->attr.exclude_user);
TEST_ASSERT_VAL("wrong exclude_kernel", !evsel->attr.exclude_kernel);
TEST_ASSERT_VAL("wrong exclude_hv", evsel->attr.exclude_hv);
- TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest);
+ /* use of precise requires exclude_guest */
+ TEST_ASSERT_VAL("wrong exclude guest", evsel->attr.exclude_guest);
TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host);
TEST_ASSERT_VAL("wrong precise_ip", evsel->attr.precise_ip == 2);
TEST_ASSERT_VAL("wrong leader", evsel->leader == leader);
err = self->comm == NULL ? -ENOMEM : 0;
if (!err) {
self->comm_set = true;
- map_groups__flush(&self->mg);
}
return err;
}
open(IN, "$output_config") or dodie("Can't read config file");
while (<IN>) {
if (/CONFIG_MODULES(=y)?/) {
- $install_mods = 1 if (defined($1));
- last;
+ if (defined($1)) {
+ $install_mods = 1;
+ last;
+ }
}
}
close(IN);
int index;
struct write_thread_data *thread_data =
(struct write_thread_data *)function_data;
- while (!write_thread_data->stop)
+ while (!thread_data->stop)
for (index = 0;
!thread_data->stop && (index < thread_data->n_fds);
++index)
if ((write(thread_data->fds[index], &data, 1) < 1) &&
(errno != EAGAIN) &&
(errno != EWOULDBLOCK)) {
- write_thread_data->status = errno;
+ thread_data->status = errno;
return;
}
}
#include <sys/mount.h>
#include <sys/statfs.h>
#include "../../include/uapi/linux/magic.h"
-#include "../../include/linux/kernel-page-flags.h"
+#include "../../include/uapi/linux/kernel-page-flags.h"
#ifndef MAX_PATH
int retval;
int rc = -1;
int namesize;
- int i;
+ unsigned int i;
mode |= S_IFREG;
static char *cpio_replace_env(char *new_location)
{
- char expanded[PATH_MAX + 1];
- char env_var[PATH_MAX + 1];
- char *start;
- char *end;
-
- for (start = NULL; (start = strstr(new_location, "${")); ) {
- end = strchr(start, '}');
- if (start < end) {
- *env_var = *expanded = '\0';
- strncat(env_var, start + 2, end - start - 2);
- strncat(expanded, new_location, start - new_location);
- strncat(expanded, getenv(env_var), PATH_MAX);
- strncat(expanded, end + 1, PATH_MAX);
- strncpy(new_location, expanded, PATH_MAX);
- } else
- break;
- }
-
- return new_location;
+ char expanded[PATH_MAX + 1];
+ char env_var[PATH_MAX + 1];
+ char *start;
+ char *end;
+
+ for (start = NULL; (start = strstr(new_location, "${")); ) {
+ end = strchr(start, '}');
+ if (start < end) {
+ *env_var = *expanded = '\0';
+ strncat(env_var, start + 2, end - start - 2);
+ strncat(expanded, new_location, start - new_location);
+ strncat(expanded, getenv(env_var),
+ PATH_MAX - strlen(expanded));
+ strncat(expanded, end + 1,
+ PATH_MAX - strlen(expanded));
+ strncpy(new_location, expanded, PATH_MAX);
+ new_location[PATH_MAX] = 0;
+ } else
+ break;
+ }
+
+ return new_location;
}
void kvm_release_pfn_clean(pfn_t pfn)
{
- WARN_ON(is_error_pfn(pfn));
-
- if (!kvm_is_mmio_pfn(pfn))
+ if (!is_error_pfn(pfn) && !kvm_is_mmio_pfn(pfn))
put_page(pfn_to_page(pfn));
}
EXPORT_SYMBOL_GPL(kvm_release_pfn_clean);
git.openpandora.org / pandora-kernel.git / commitdiff