staging: rtl8192u: fix function arguments position in r819xU_phy.c

This patch fixes the alignment of function arguments to make
it uniform across the driver trying to keep the line size
below 80 characters.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
index d91d1de..66ab3d5 100644 (file)
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -80,7 +80,8 @@ u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device *dev, u32 eRFPath)
  *  return:  none
  *  notice:
  * ****************************************************************************/
-void rtl8192_setBBreg(struct net_device *dev, u32 dwRegAddr, u32 dwBitMask, u32 dwData)
+void rtl8192_setBBreg(struct net_device *dev, u32 dwRegAddr, u32 dwBitMask,
+                     u32 dwData)
 {
 
        u32 OriginalValue, BitShift, NewValue;
@@ -114,9 +115,12 @@ u32 rtl8192_QueryBBReg(struct net_device *dev, u32 dwRegAddr, u32 dwBitMask)
 
        return Ret;
 }
-static  u32 phy_FwRFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E       eRFPath, u32 Offset);
+static u32 phy_FwRFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
+                             u32 Offset);
 
-static void phy_FwRFSerialWrite(struct net_device *dev, RF90_RADIO_PATH_E       eRFPath, u32  Offset, u32  Data);
+static void phy_FwRFSerialWrite(struct net_device *dev,
+                               RF90_RADIO_PATH_E eRFPath, u32  Offset,
+                               u32  Data);
 
 /******************************************************************************
  *function:  This function read register from RF chip
@@ -127,7 +131,8 @@ static void phy_FwRFSerialWrite(struct net_device *dev, RF90_RADIO_PATH_E
  *  return:  u32       readback value
  *  notice:  There are three types of serial operations:(1) Software serial write.(2)Hardware LSSI-Low Speed Serial Interface.(3)Hardware HSSI-High speed serial write. Driver here need to implement (1) and (2)---need more spec for this information.
  * ****************************************************************************/
-u32 rtl8192_phy_RFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, u32 Offset)
+u32 rtl8192_phy_RFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
+                            u32 Offset)
 {
        struct r8192_priv *priv = ieee80211_priv(dev);
        u32 ret = 0;
@@ -208,7 +213,8 @@ u32 rtl8192_phy_RFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
  * Reg_Mode2   1               1                       Reg 31 ~ 45(0x1 ~ 0xf)
  *------------------------------------------------------------------
  * ****************************************************************************/
-void rtl8192_phy_RFSerialWrite(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data)
+void rtl8192_phy_RFSerialWrite(struct net_device *dev,
+                              RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data)
 {
        struct r8192_priv *priv = ieee80211_priv(dev);
        u32 DataAndAddr = 0, NewOffset = 0;
@@ -269,7 +275,8 @@ void rtl8192_phy_RFSerialWrite(struct net_device *dev, RF90_RADIO_PATH_E eRFPath
  *  return:  none
  *  notice:
  * ****************************************************************************/
-void rtl8192_phy_SetRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask, u32 Data)
+void rtl8192_phy_SetRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
+                         u32 RegAddr, u32 BitMask, u32 Data)
 {
        struct r8192_priv *priv = ieee80211_priv(dev);
        u32 Original_Value, BitShift, New_Value;
@@ -313,7 +320,8 @@ void rtl8192_phy_SetRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, u32
  *  return:  u32       Data    //the readback register value
  *  notice:
  * ****************************************************************************/
-u32 rtl8192_phy_QueryRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask)
+u32 rtl8192_phy_QueryRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
+                          u32 RegAddr, u32 BitMask)
 {
        u32 Original_Value, Readback_Value, BitShift;
        struct r8192_priv *priv = ieee80211_priv(dev);
@@ -341,11 +349,8 @@ u32 rtl8192_phy_QueryRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, u3
  *  return:  none
  *  notice:
  * ***************************************************************************/
-static u32
-phy_FwRFSerialRead(
-       struct net_device *dev,
-       RF90_RADIO_PATH_E       eRFPath,
-       u32                             Offset  )
+static u32 phy_FwRFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
+                             u32 Offset)
 {
        u32             retValue = 0;
        u32             Data = 0;
@@ -399,12 +404,8 @@ phy_FwRFSerialRead(
  *  return:  none
  *  notice:
  * ***************************************************************************/
-static void
-phy_FwRFSerialWrite(
-               struct net_device *dev,
-               RF90_RADIO_PATH_E       eRFPath,
-               u32                             Offset,
-               u32                             Data    )
+static void phy_FwRFSerialWrite(struct net_device *dev,
+                               RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data)
 {
        u8      time = 0;
        u32     tmp;
@@ -642,7 +643,8 @@ void rtl8192_InitBBRFRegDef(struct net_device *dev)
  *  return:  return whether BB and RF is ok(0:OK; 1:Fail)
  *  notice:  This function may be removed in the ASIC
  * ***************************************************************************/
-u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, HW90_BLOCK_E CheckBlock, RF90_RADIO_PATH_E eRFPath)
+u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, HW90_BLOCK_E CheckBlock,
+                           RF90_RADIO_PATH_E eRFPath)
 {
        u8 ret = 0;
        u32 i, CheckTimes = 4, dwRegRead = 0;
@@ -883,7 +885,8 @@ void rtl8192_phy_updateInitGain(struct net_device *dev)
  *  return:  return code show if RF configuration is successful(0:pass, 1:fail)
  *    Note:  Delay may be required for RF configuration
  * ***************************************************************************/
-u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev, RF90_RADIO_PATH_E        eRFPath)
+u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev,
+                                     RF90_RADIO_PATH_E eRFPath)
 {
 
        int i;
@@ -989,7 +992,8 @@ void rtl8192_SetTxPowerLevel(struct net_device *dev, u8 channel)
  *  return:  none
  *    Note:
  * ***************************************************************************/
-bool rtl8192_SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerState)
+bool rtl8192_SetRFPowerState(struct net_device *dev,
+                            RT_RF_POWER_STATE eRFPowerState)
 {
        bool                            bResult = true;
        struct r8192_priv *priv = ieee80211_priv(dev);
@@ -1112,15 +1116,9 @@ bool rtl8192_SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerS
  *  return:  true if finished, false otherwise
  *    Note:
  * ************************************************************************************/
-u8 rtl8192_phy_SetSwChnlCmdArray(
-       SwChnlCmd               *CmdTable,
-       u32                     CmdTableIdx,
-       u32                     CmdTableSz,
-       SwChnlCmdID             CmdID,
-       u32                     Para1,
-       u32                     Para2,
-       u32                     msDelay
-       )
+u8 rtl8192_phy_SetSwChnlCmdArray(SwChnlCmd *CmdTable, u32 CmdTableIdx,
+                                u32 CmdTableSz, SwChnlCmdID CmdID, u32 Para1,
+                                u32 Para2, u32 msDelay)
 {
        SwChnlCmd *pCmd;
 
@@ -1153,7 +1151,8 @@ u8 rtl8192_phy_SetSwChnlCmdArray(
  *  return:  true if finished, false otherwise
  *    Note:  Wait for simpler function to replace it //wb
  * ***************************************************************************/
-u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage, u8 *step, u32 *delay)
+u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage,
+                               u8 *step, u32 *delay)
 {
        struct r8192_priv *priv = ieee80211_priv(dev);
        SwChnlCmd                               PreCommonCmd[MAX_PRECMD_CNT];
@@ -1522,7 +1521,8 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
  *    Note:  I doubt whether SetBWModeInProgress flag is necessary as we can
  *          test whether current work in the queue or not.//do I?
  * ***************************************************************************/
-void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH        Bandwidth, HT_EXTCHNL_OFFSET Offset)
+void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth,
+                      HT_EXTCHNL_OFFSET Offset)
 {
        struct r8192_priv *priv = ieee80211_priv(dev);