if (debug >= 1) \
dev_dbg(&(usb_dev)->dev, \
"[ueagle-atm dbg] %s: " format, \
- __FUNCTION__, ##args); \
+ __func__, ##args); \
} while (0)
#define uea_vdbg(usb_dev, format, args...) \
} while (0)
#define uea_enters(usb_dev) \
- uea_vdbg(usb_dev, "entering %s\n", __FUNCTION__)
+ uea_vdbg(usb_dev, "entering %s\n", __func__)
#define uea_leaves(usb_dev) \
- uea_vdbg(usb_dev, "leaving %s\n", __FUNCTION__)
+ uea_vdbg(usb_dev, "leaving %s\n", __func__)
#define uea_err(usb_dev, format,args...) \
dev_err(&(usb_dev)->dev ,"[UEAGLE-ATM] " format , ##args)
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __FUNCTION__, status);
+ dbg("%s - urb shutting down with status: %d", __func__, status);
return;
default:
- dbg("%s - nonzero urb status received: %d", __FUNCTION__, status);
+ dbg("%s - nonzero urb status received: %d", __func__, status);
goto exit;
}
retval = usb_submit_urb (urb, GFP_ATOMIC);
if (retval)
err ("%s - usb_submit_urb failed with result %d",
- __FUNCTION__, retval);
+ __func__, retval);
}
/* data interface returns incoming bytes, or we got unthrottled */
switch (cmd) {
case USBDEVFS_CONTROL:
- snoop(&dev->dev, "%s: CONTROL\n", __FUNCTION__);
+ snoop(&dev->dev, "%s: CONTROL\n", __func__);
ret = proc_control(ps, p);
if (ret >= 0)
inode->i_mtime = CURRENT_TIME;
break;
case USBDEVFS_BULK:
- snoop(&dev->dev, "%s: BULK\n", __FUNCTION__);
+ snoop(&dev->dev, "%s: BULK\n", __func__);
ret = proc_bulk(ps, p);
if (ret >= 0)
inode->i_mtime = CURRENT_TIME;
break;
case USBDEVFS_RESETEP:
- snoop(&dev->dev, "%s: RESETEP\n", __FUNCTION__);
+ snoop(&dev->dev, "%s: RESETEP\n", __func__);
ret = proc_resetep(ps, p);
if (ret >= 0)
inode->i_mtime = CURRENT_TIME;
break;
case USBDEVFS_RESET:
- snoop(&dev->dev, "%s: RESET\n", __FUNCTION__);
+ snoop(&dev->dev, "%s: RESET\n", __func__);
ret = proc_resetdevice(ps);
break;
case USBDEVFS_CLEAR_HALT:
- snoop(&dev->dev, "%s: CLEAR_HALT\n", __FUNCTION__);
+ snoop(&dev->dev, "%s: CLEAR_HALT\n", __func__);
ret = proc_clearhalt(ps, p);
if (ret >= 0)
inode->i_mtime = CURRENT_TIME;
break;
case USBDEVFS_GETDRIVER:
- snoop(&dev->dev, "%s: GETDRIVER\n", __FUNCTION__);
+ snoop(&dev->dev, "%s: GETDRIVER\n", __func__);
ret = proc_getdriver(ps, p);
break;
case USBDEVFS_CONNECTINFO:
- snoop(&dev->dev, "%s: CONNECTINFO\n", __FUNCTION__);
+ snoop(&dev->dev, "%s: CONNECTINFO\n", __func__);
ret = proc_connectinfo(ps, p);
break;
case USBDEVFS_SETINTERFACE:
- snoop(&dev->dev, "%s: SETINTERFACE\n", __FUNCTION__);
+ snoop(&dev->dev, "%s: SETINTERFACE\n", __func__);
ret = proc_setintf(ps, p);
break;
case USBDEVFS_SETCONFIGURATION:
- snoop(&dev->dev, "%s: SETCONFIGURATION\n", __FUNCTION__);
+ snoop(&dev->dev, "%s: SETCONFIGURATION\n", __func__);
ret = proc_setconfig(ps, p);
break;
case USBDEVFS_SUBMITURB:
- snoop(&dev->dev, "%s: SUBMITURB\n", __FUNCTION__);
+ snoop(&dev->dev, "%s: SUBMITURB\n", __func__);
ret = proc_submiturb(ps, p);
if (ret >= 0)
inode->i_mtime = CURRENT_TIME;
#ifdef CONFIG_COMPAT
case USBDEVFS_SUBMITURB32:
- snoop(&dev->dev, "%s: SUBMITURB32\n", __FUNCTION__);
+ snoop(&dev->dev, "%s: SUBMITURB32\n", __func__);
ret = proc_submiturb_compat(ps, p);
if (ret >= 0)
inode->i_mtime = CURRENT_TIME;
break;
case USBDEVFS_REAPURB32:
- snoop(&dev->dev, "%s: REAPURB32\n", __FUNCTION__);
+ snoop(&dev->dev, "%s: REAPURB32\n", __func__);
ret = proc_reapurb_compat(ps, p);
break;
case USBDEVFS_REAPURBNDELAY32:
- snoop(&dev->dev, "%s: REAPURBDELAY32\n", __FUNCTION__);
+ snoop(&dev->dev, "%s: REAPURBDELAY32\n", __func__);
ret = proc_reapurbnonblock_compat(ps, p);
break;
case USBDEVFS_IOCTL32:
- snoop(&dev->dev, "%s: IOCTL\n", __FUNCTION__);
+ snoop(&dev->dev, "%s: IOCTL\n", __func__);
ret = proc_ioctl_compat(ps, ptr_to_compat(p));
break;
#endif
case USBDEVFS_DISCARDURB:
- snoop(&dev->dev, "%s: DISCARDURB\n", __FUNCTION__);
+ snoop(&dev->dev, "%s: DISCARDURB\n", __func__);
ret = proc_unlinkurb(ps, p);
break;
case USBDEVFS_REAPURB:
- snoop(&dev->dev, "%s: REAPURB\n", __FUNCTION__);
+ snoop(&dev->dev, "%s: REAPURB\n", __func__);
ret = proc_reapurb(ps, p);
break;
case USBDEVFS_REAPURBNDELAY:
- snoop(&dev->dev, "%s: REAPURBDELAY\n", __FUNCTION__);
+ snoop(&dev->dev, "%s: REAPURBDELAY\n", __func__);
ret = proc_reapurbnonblock(ps, p);
break;
case USBDEVFS_DISCSIGNAL:
- snoop(&dev->dev, "%s: DISCSIGNAL\n", __FUNCTION__);
+ snoop(&dev->dev, "%s: DISCSIGNAL\n", __func__);
ret = proc_disconnectsignal(ps, p);
break;
case USBDEVFS_CLAIMINTERFACE:
- snoop(&dev->dev, "%s: CLAIMINTERFACE\n", __FUNCTION__);
+ snoop(&dev->dev, "%s: CLAIMINTERFACE\n", __func__);
ret = proc_claiminterface(ps, p);
break;
case USBDEVFS_RELEASEINTERFACE:
- snoop(&dev->dev, "%s: RELEASEINTERFACE\n", __FUNCTION__);
+ snoop(&dev->dev, "%s: RELEASEINTERFACE\n", __func__);
ret = proc_releaseinterface(ps, p);
break;
case USBDEVFS_IOCTL:
- snoop(&dev->dev, "%s: IOCTL\n", __FUNCTION__);
+ snoop(&dev->dev, "%s: IOCTL\n", __func__);
ret = proc_ioctl_default(ps, p);
break;
}
struct usb_device *udev;
int error = -ENODEV;
- dev_dbg(dev, "%s\n", __FUNCTION__);
+ dev_dbg(dev, "%s\n", __func__);
if (!is_usb_device(dev)) /* Sanity check */
return error;
const struct usb_device_id *id;
int error = -ENODEV;
- dev_dbg(dev, "%s\n", __FUNCTION__);
+ dev_dbg(dev, "%s\n", __func__);
if (is_usb_device(dev)) /* Sanity check */
return error;
if (!id)
id = usb_match_dynamic_id(intf, driver);
if (id) {
- dev_dbg(dev, "%s - got id\n", __FUNCTION__);
+ dev_dbg(dev, "%s - got id\n", __func__);
error = usb_autoresume_device(udev);
if (error)
status = udriver->suspend(udev, msg);
done:
- dev_vdbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
+ dev_vdbg(&udev->dev, "%s: status %d\n", __func__, status);
return status;
}
status = udriver->resume(udev);
done:
- dev_vdbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
+ dev_vdbg(&udev->dev, "%s: status %d\n", __func__, status);
if (status == 0)
udev->autoresume_disabled = 0;
return status;
}
done:
- dev_vdbg(&intf->dev, "%s: status %d\n", __FUNCTION__, status);
+ dev_vdbg(&intf->dev, "%s: status %d\n", __func__, status);
return status;
}
}
done:
- dev_vdbg(&intf->dev, "%s: status %d\n", __FUNCTION__, status);
+ dev_vdbg(&intf->dev, "%s: status %d\n", __func__, status);
if (status == 0)
mark_active(intf);
}
done:
- dev_vdbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
+ dev_vdbg(&udev->dev, "%s: status %d\n", __func__, status);
return status;
}
}
done:
- dev_vdbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
+ dev_vdbg(&udev->dev, "%s: status %d\n", __func__, status);
if (!status)
udev->reset_resume = 0;
return status;
status = usb_autopm_do_device(udev, -1);
dev_vdbg(&udev->dev, "%s: cnt %d\n",
- __FUNCTION__, udev->pm_usage_cnt);
+ __func__, udev->pm_usage_cnt);
}
/**
{
usb_autopm_do_device(udev, 0);
dev_vdbg(&udev->dev, "%s: cnt %d\n",
- __FUNCTION__, udev->pm_usage_cnt);
+ __func__, udev->pm_usage_cnt);
}
/**
status = usb_autopm_do_device(udev, 1);
dev_vdbg(&udev->dev, "%s: status %d cnt %d\n",
- __FUNCTION__, status, udev->pm_usage_cnt);
+ __func__, status, udev->pm_usage_cnt);
return status;
}
status = usb_autopm_do_interface(intf, -1);
dev_vdbg(&intf->dev, "%s: status %d cnt %d\n",
- __FUNCTION__, status, intf->pm_usage_cnt);
+ __func__, status, intf->pm_usage_cnt);
}
EXPORT_SYMBOL_GPL(usb_autopm_put_interface);
status = usb_autopm_do_interface(intf, 1);
dev_vdbg(&intf->dev, "%s: status %d cnt %d\n",
- __FUNCTION__, status, intf->pm_usage_cnt);
+ __func__, status, intf->pm_usage_cnt);
return status;
}
EXPORT_SYMBOL_GPL(usb_autopm_get_interface);
status = usb_autopm_do_interface(intf, 0);
dev_vdbg(&intf->dev, "%s: status %d cnt %d\n",
- __FUNCTION__, status, intf->pm_usage_cnt);
+ __func__, status, intf->pm_usage_cnt);
return status;
}
EXPORT_SYMBOL_GPL(usb_autopm_set_interface);
ret = get_hub_status(hub->hdev, &hub->status->hub);
if (ret < 0)
dev_err (hub->intfdev,
- "%s failed (err = %d)\n", __FUNCTION__, ret);
+ "%s failed (err = %d)\n", __func__, ret);
else {
*status = le16_to_cpu(hub->status->hub.wHubStatus);
*change = le16_to_cpu(hub->status->hub.wHubChange);
int i;
if (!udev) {
- pr_debug ("%s nodev\n", __FUNCTION__);
+ pr_debug ("%s nodev\n", __func__);
return;
}
}
}
- dev_dbg(&intf->dev, "%s\n", __FUNCTION__);
+ dev_dbg(&intf->dev, "%s\n", __func__);
/* stop khubd and related activity */
hub_quiesce(hub);
if (!parent_hdev) {
/* this requires hcd-specific logic; see OHCI hc_restart() */
- dev_dbg(&udev->dev, "%s for root hub!\n", __FUNCTION__);
+ dev_dbg(&udev->dev, "%s for root hub!\n", __func__);
return -EISDIR;
}
parent_hub = hdev_to_hub(parent_hdev);
inode = usbfs_get_inode(sb, S_IFDIR | 0755, 0);
if (!inode) {
- dbg("%s: could not get inode!",__FUNCTION__);
+ dbg("%s: could not get inode!",__func__);
return -ENOMEM;
}
root = d_alloc_root(inode);
if (!root) {
- dbg("%s: could not get root dentry!",__FUNCTION__);
+ dbg("%s: could not get root dentry!",__func__);
iput(inode);
return -ENOMEM;
}
retval != -EBUSY)
dev_err(&io->dev->dev,
"%s, unlink --> %d\n",
- __FUNCTION__, retval);
+ __func__, retval);
} else if (urb == io->urbs [i])
found = 1;
}
io->urbs[i]->dev = NULL;
io->urbs[i]->status = retval;
dev_dbg(&io->dev->dev, "%s, submit --> %d\n",
- __FUNCTION__, retval);
+ __func__, retval);
usb_sg_cancel(io);
}
spin_lock_irq(&io->lock);
retval = usb_unlink_urb(io->urbs [i]);
if (retval != -EINPROGRESS && retval != -EBUSY)
dev_warn(&io->dev->dev, "%s, unlink --> %d\n",
- __FUNCTION__, retval);
+ __func__, retval);
}
spin_lock(&io->lock);
}
{
int i;
- dev_dbg(&dev->dev, "%s nuking %s URBs\n", __FUNCTION__,
+ dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__,
skip_ep0 ? "non-ep0" : "all");
for (i = skip_ep0; i < 16; ++i) {
usb_disable_endpoint(dev, i);
dev_dbg(&dev->dev,
"bogus endpoint ep%d%s in %s (bad maxpacket %d)\n",
usb_endpoint_num(&ep->desc), is_out ? "out" : "in",
- __FUNCTION__, max);
+ __func__, max);
return -EMSGSIZE;
}
if (list_empty(&ep->queue))
return;
- VDBG("%s %s\n", __FUNCTION__, ep->ep.name);
+ VDBG("%s %s\n", __func__, ep->ep.name);
while (!list_empty(&ep->queue)) {
req = list_entry(ep->queue.next, struct at91_request, queue);
done(ep, req, status);
int status = -EINVAL;
unsigned long flags;
- DBG("%s\n", __FUNCTION__ );
+ DBG("%s\n", __func__ );
local_irq_save(flags);
if (!udc->clocked || !udc->suspended)
{
struct dummy *dum = platform_get_drvdata(pdev);
- dev_dbg (&pdev->dev, "%s\n", __FUNCTION__);
+ dev_dbg (&pdev->dev, "%s\n", __func__);
spin_lock_irq (&dum->lock);
dum->udc_suspended = 1;
set_link_state (dum);
{
struct dummy *dum = platform_get_drvdata(pdev);
- dev_dbg (&pdev->dev, "%s\n", __FUNCTION__);
+ dev_dbg (&pdev->dev, "%s\n", __func__);
spin_lock_irq (&dum->lock);
dum->udc_suspended = 0;
set_link_state (dum);
{
struct dummy *dum = hcd_to_dummy (hcd);
- dev_dbg (&hcd->self.root_hub->dev, "%s\n", __FUNCTION__);
+ dev_dbg (&hcd->self.root_hub->dev, "%s\n", __func__);
spin_lock_irq (&dum->lock);
dum->rh_state = DUMMY_RH_SUSPENDED;
struct dummy *dum = hcd_to_dummy (hcd);
int rc = 0;
- dev_dbg (&hcd->self.root_hub->dev, "%s\n", __FUNCTION__);
+ dev_dbg (&hcd->self.root_hub->dev, "%s\n", __func__);
spin_lock_irq (&dum->lock);
if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
struct dummy *dum;
int rc = 0;
- dev_dbg (&pdev->dev, "%s\n", __FUNCTION__);
+ dev_dbg (&pdev->dev, "%s\n", __func__);
hcd = platform_get_drvdata (pdev);
dum = hcd_to_dummy (hcd);
{
struct usb_hcd *hcd;
- dev_dbg (&pdev->dev, "%s\n", __FUNCTION__);
+ dev_dbg (&pdev->dev, "%s\n", __func__);
hcd = platform_get_drvdata (pdev);
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
if (dev->config == 0)
return;
- DEBUG (dev, "%s\n", __FUNCTION__);
+ DEBUG (dev, "%s\n", __func__);
netif_stop_queue (dev->net);
netif_carrier_off (dev->net);
struct usb_cdc_notification *event;
int value;
- DEBUG (dev, "%s, flush old status first\n", __FUNCTION__);
+ DEBUG (dev, "%s, flush old status first\n", __func__);
/* flush old status
*
spin_lock(&dev->lock);
status = rndis_msg_parser (dev->rndis_config, (u8 *) req->buf);
if (status < 0)
- ERROR(dev, "%s: rndis parse error %d\n", __FUNCTION__, status);
+ ERROR(dev, "%s: rndis parse error %d\n", __func__, status);
spin_unlock(&dev->lock);
}
static void eth_start (struct eth_dev *dev, gfp_t gfp_flags)
{
- DEBUG (dev, "%s\n", __FUNCTION__);
+ DEBUG (dev, "%s\n", __func__);
/* fill the rx queue */
rx_fill (dev, gfp_flags);
{
struct eth_dev *dev = netdev_priv(net);
- DEBUG (dev, "%s\n", __FUNCTION__);
+ DEBUG (dev, "%s\n", __func__);
if (netif_carrier_ok (dev->net))
eth_start (dev, GFP_KERNEL);
return 0;
{
struct eth_dev *dev = netdev_priv(net);
- VDEBUG (dev, "%s\n", __FUNCTION__);
+ VDEBUG (dev, "%s\n", __func__);
netif_stop_queue (net);
DEBUG (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n",
if (req->actual > 0)
dump_msg(fsg, fsg->ep0req_name, req->buf, req->actual);
if (req->status || req->actual != req->length)
- DBG(fsg, "%s --> %d, %u/%u\n", __FUNCTION__,
+ DBG(fsg, "%s --> %d, %u/%u\n", __func__,
req->status, req->actual, req->length);
if (req->status == -ECONNRESET) // Request was cancelled
usb_ep_fifo_flush(ep);
struct fsg_buffhd *bh = req->context;
if (req->status || req->actual != req->length)
- DBG(fsg, "%s --> %d, %u/%u\n", __FUNCTION__,
+ DBG(fsg, "%s --> %d, %u/%u\n", __func__,
req->status, req->actual, req->length);
if (req->status == -ECONNRESET) // Request was cancelled
usb_ep_fifo_flush(ep);
dump_msg(fsg, "bulk-out", req->buf, req->actual);
if (req->status || req->actual != bh->bulk_out_intended_length)
- DBG(fsg, "%s --> %d, %u/%u\n", __FUNCTION__,
+ DBG(fsg, "%s --> %d, %u/%u\n", __func__,
req->status, req->actual,
bh->bulk_out_intended_length);
if (req->status == -ECONNRESET) // Request was cancelled
struct fsg_buffhd *bh = req->context;
if (req->status || req->actual != req->length)
- DBG(fsg, "%s --> %d, %u/%u\n", __FUNCTION__,
+ DBG(fsg, "%s --> %d, %u/%u\n", __func__,
req->status, req->actual, req->length);
if (req->status == -ECONNRESET) // Request was cancelled
usb_ep_fifo_flush(ep);
/* catch various bogus parameters */
if (!_req || !req->req.complete || !req->req.buf
|| !list_empty(&req->queue)) {
- VDBG("%s, bad params\n", __FUNCTION__);
+ VDBG("%s, bad params\n", __func__);
return -EINVAL;
}
if (unlikely(!_ep || !ep->desc)) {
- VDBG("%s, bad ep\n", __FUNCTION__);
+ VDBG("%s, bad ep\n", __func__);
return -EINVAL;
}
if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
#ifdef DEBUG
#define DBG(fmt, args...) printk(KERN_DEBUG "[%s] " fmt "\n", \
- __FUNCTION__, ## args)
+ __func__, ## args)
#else
#define DBG(fmt, args...) do{}while(0)
#endif
req->req.actual = (curr - req->req.dma) + 1;
req->req.status = status;
- VDBG(ep->dev, "%s %s %s %d/%d\n", __FUNCTION__, ep->ep.name,
+ VDBG(ep->dev, "%s %s %s %d/%d\n", __func__, ep->ep.name,
ep->is_in ? "IN" : "OUT",
req->req.actual, req->req.length);
if (dev->ep0state == EP0_SUSPEND)
return -EBUSY;
- VDBG(dev, "%s %s %s %s %p\n", __FUNCTION__, _ep->name,
+ VDBG(dev, "%s %s %s %s %p\n", __func__, _ep->name,
ep->is_in ? "IN" : "OUT",
ep->dma ? "dma" : "pio",
_req);
/* don't change EPxSTATUS_EP_INVALID to READY */
} else if (!ep->desc) {
- DBG(ep->dev, "%s %s inactive?\n", __FUNCTION__, ep->ep.name);
+ DBG(ep->dev, "%s %s inactive?\n", __func__, ep->ep.name);
return -EINVAL;
}
regs = ep->dev->regs;
size = readl(®s->EPxSizeLA[ep->num]) & DATASIZE;
size += readl(®s->EPxSizeLB[ep->num]) & DATASIZE;
- VDBG(ep->dev, "%s %s %u\n", __FUNCTION__, ep->ep.name, size);
+ VDBG(ep->dev, "%s %s %u\n", __func__, ep->ep.name, size);
return size;
}
if (!_ep)
return;
ep = container_of(_ep, struct goku_ep, ep);
- VDBG(ep->dev, "%s %s\n", __FUNCTION__, ep->ep.name);
+ VDBG(ep->dev, "%s %s\n", __func__, ep->ep.name);
/* don't change EPxSTATUS_EP_INVALID to READY */
if (!ep->desc && ep->num != 0) {
- DBG(ep->dev, "%s %s inactive?\n", __FUNCTION__, ep->ep.name);
+ DBG(ep->dev, "%s %s inactive?\n", __func__, ep->ep.name);
return;
}
struct goku_udc_regs __iomem *regs = dev->regs;
unsigned i;
- VDBG(dev, "%s\n", __FUNCTION__);
+ VDBG(dev, "%s\n", __func__);
udc_reset(dev);
udc_reinit (dev);
if (readl(&dev->regs->power_detect) & PW_DETECT)
ep0_start(dev);
else {
- DBG(dev, "%s\n", __FUNCTION__);
+ DBG(dev, "%s\n", __func__);
dev->int_enable = INT_PWRDETECT;
writel(dev->int_enable, &dev->regs->int_enable);
}
{
unsigned i;
- DBG (dev, "%s\n", __FUNCTION__);
+ DBG (dev, "%s\n", __func__);
if (dev->gadget.speed == USB_SPEED_UNKNOWN)
driver = NULL;
{
struct goku_udc *dev = pci_get_drvdata(pdev);
- DBG(dev, "%s\n", __FUNCTION__);
+ DBG(dev, "%s\n", __func__);
BUG_ON(dev->driver);
switch (state) {
default:
- DBG (dev, "fail %s, state %d\n", __FUNCTION__, state);
+ DBG (dev, "fail %s, state %d\n", __func__, state);
retval = -ESRCH;
break;
case STATE_DEV_UNCONNECTED:
case STATE_DEV_CONNECTED:
spin_unlock_irq (&dev->lock);
- DBG (dev, "%s wait\n", __FUNCTION__);
+ DBG (dev, "%s wait\n", __func__);
/* wait for events */
retval = wait_event_interruptible (dev->wait,
DBG(dev, "bogus ep0out stall!\n");
}
} else
- DBG (dev, "fail %s, state %d\n", __FUNCTION__, dev->state);
+ DBG (dev, "fail %s, state %d\n", __func__, dev->state);
spin_unlock_irq (&dev->lock);
return retval;
{
struct dev_data *dev = fd->private_data;
// caller must F_SETOWN before signal delivery happens
- VDEBUG (dev, "%s %s\n", __FUNCTION__, on ? "on" : "off");
+ VDEBUG (dev, "%s %s\n", __func__, on ? "on" : "off");
return fasync_helper (f, fd, on, &dev->fasync);
}
{
struct list_head *entry, *tmp;
- DBG (dev, "%s %d\n", __FUNCTION__, dev->state);
+ DBG (dev, "%s %d\n", __func__, dev->state);
/* dev->state must prevent interference */
restart:
put_dev (dev);
kfree (data);
enomem0:
- DBG (dev, "%s enomem\n", __FUNCTION__);
+ DBG (dev, "%s enomem\n", __func__);
destroy_ep_files (dev);
return -ENOMEM;
}
{
struct dev_data *dev = get_gadget_data (gadget);
- DBG (dev, "%s\n", __FUNCTION__);
+ DBG (dev, "%s\n", __func__);
spin_lock_irq (&dev->lock);
dev->state = STATE_DEV_UNBOUND;
/* we've already been disconnected ... no i/o is active */
if (dev->req)
usb_ep_free_request (gadget->ep0, dev->req);
- DBG (dev, "%s done\n", __FUNCTION__);
+ DBG (dev, "%s done\n", __func__);
put_dev (dev);
}
fail:
spin_unlock_irq (&dev->lock);
- pr_debug ("%s: %s fail %Zd, %p\n", shortname, __FUNCTION__, value, dev);
+ pr_debug ("%s: %s fail %Zd, %p\n", shortname, __func__, value, dev);
kfree (dev->buf);
dev->buf = NULL;
return value;
*/
static void udc_disable(struct lh7a40x_udc *dev)
{
- DEBUG("%s, %p\n", __FUNCTION__, dev);
+ DEBUG("%s, %p\n", __func__, dev);
udc_set_address(dev, 0);
{
u32 i;
- DEBUG("%s, %p\n", __FUNCTION__, dev);
+ DEBUG("%s, %p\n", __func__, dev);
/* device/ep0 records init */
INIT_LIST_HEAD(&dev->gadget.ep_list);
{
int ep;
- DEBUG("%s, %p\n", __FUNCTION__, dev);
+ DEBUG("%s, %p\n", __func__, dev);
dev->gadget.speed = USB_SPEED_UNKNOWN;
struct lh7a40x_udc *dev = the_controller;
int retval;
- DEBUG("%s: %s\n", __FUNCTION__, driver->driver.name);
+ DEBUG("%s: %s\n", __func__, driver->driver.name);
if (!driver
|| driver->speed != USB_SPEED_FULL
is_short = unlikely(max < ep_maxpacket(ep));
}
- DEBUG("%s: wrote %s %d bytes%s%s %d left %p\n", __FUNCTION__,
+ DEBUG("%s: wrote %s %d bytes%s%s %d left %p\n", __func__,
ep->ep.name, count,
is_last ? "/L" : "", is_short ? "/S" : "",
req->req.length - req->req.actual, req);
/* make sure there's a packet in the FIFO. */
csr = usb_read(ep->csr1);
if (!(csr & USB_OUT_CSR1_OUT_PKT_RDY)) {
- DEBUG("%s: Packet NOT ready!\n", __FUNCTION__);
+ DEBUG("%s: Packet NOT ready!\n", __func__);
return -EINVAL;
}
unsigned int stopped = ep->stopped;
u32 index;
- DEBUG("%s, %p\n", __FUNCTION__, ep);
+ DEBUG("%s, %p\n", __func__, ep);
list_del_init(&req->queue);
if (likely(req->req.status == -EINPROGRESS))
/** Enable EP interrupt */
static void pio_irq_enable(int ep)
{
- DEBUG("%s: %d\n", __FUNCTION__, ep);
+ DEBUG("%s: %d\n", __func__, ep);
switch (ep) {
case 1:
/** Disable EP interrupt */
static void pio_irq_disable(int ep)
{
- DEBUG("%s: %d\n", __FUNCTION__, ep);
+ DEBUG("%s: %d\n", __func__, ep);
switch (ep) {
case 1:
{
struct lh7a40x_request *req;
- DEBUG("%s, %p\n", __FUNCTION__, ep);
+ DEBUG("%s, %p\n", __func__, ep);
/* Flush FIFO */
flush(ep);
*/
static void flush(struct lh7a40x_ep *ep)
{
- DEBUG("%s, %p\n", __FUNCTION__, ep);
+ DEBUG("%s, %p\n", __func__, ep);
switch (ep->ep_type) {
case ep_control:
usb_set_index(ep_idx);
csr = usb_read(ep->csr1);
- DEBUG("%s: %d, csr %x\n", __FUNCTION__, ep_idx, csr);
+ DEBUG("%s: %d, csr %x\n", __func__, ep_idx, csr);
if (csr & USB_IN_CSR1_SENT_STALL) {
DEBUG("USB_IN_CSR1_SENT_STALL\n");
}
if (!ep->desc) {
- DEBUG("%s: NO EP DESC\n", __FUNCTION__);
+ DEBUG("%s: NO EP DESC\n", __func__);
return;
}
struct lh7a40x_ep *ep = &dev->ep[ep_idx];
struct lh7a40x_request *req;
- DEBUG("%s: %d\n", __FUNCTION__, ep_idx);
+ DEBUG("%s: %d\n", __func__, ep_idx);
usb_set_index(ep_idx);
usb_read(ep->
csr1)) & (USB_OUT_CSR1_OUT_PKT_RDY |
USB_OUT_CSR1_SENT_STALL)) {
- DEBUG("%s: %x\n", __FUNCTION__, csr);
+ DEBUG("%s: %x\n", __func__, csr);
if (csr & USB_OUT_CSR1_SENT_STALL) {
DEBUG("%s: stall sent, flush fifo\n",
- __FUNCTION__);
+ __func__);
/* usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1); */
flush(ep);
} else if (csr & USB_OUT_CSR1_OUT_PKT_RDY) {
if (!req) {
printk("%s: NULL REQ %d\n",
- __FUNCTION__, ep_idx);
+ __func__, ep_idx);
flush(ep);
break;
} else {
} else {
/* Throw packet away.. */
- printk("%s: No descriptor?!?\n", __FUNCTION__);
+ printk("%s: No descriptor?!?\n", __func__);
flush(ep);
}
}
#if 0 /* def CONFIG_ARCH_LH7A404 */
/* Does not work always... */
- DEBUG("%s: %d\n", __FUNCTION__, dev->usb_address);
+ DEBUG("%s: %d\n", __func__, dev->usb_address);
if (!dev->usb_address) {
/*usb_set(USB_RESET_IO, USB_RESET);
if (!intr_out && !intr_in && !intr_int)
break;
- DEBUG("%s (on state %s)\n", __FUNCTION__,
+ DEBUG("%s (on state %s)\n", __func__,
state_names[dev->ep0state]);
DEBUG("intr_out = %x\n", intr_out);
DEBUG("intr_in = %x\n", intr_in);
struct lh7a40x_udc *dev;
unsigned long flags;
- DEBUG("%s, %p\n", __FUNCTION__, _ep);
+ DEBUG("%s, %p\n", __func__, _ep);
ep = container_of(_ep, struct lh7a40x_ep, ep);
if (!_ep || !desc || ep->desc || _ep->name == ep0name
|| desc->bDescriptorType != USB_DT_ENDPOINT
|| ep->bEndpointAddress != desc->bEndpointAddress
|| ep_maxpacket(ep) < le16_to_cpu(desc->wMaxPacketSize)) {
- DEBUG("%s, bad ep or descriptor\n", __FUNCTION__);
+ DEBUG("%s, bad ep or descriptor\n", __func__);
return -EINVAL;
}
if (ep->bmAttributes != desc->bmAttributes
&& ep->bmAttributes != USB_ENDPOINT_XFER_BULK
&& desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
- DEBUG("%s, %s type mismatch\n", __FUNCTION__, _ep->name);
+ DEBUG("%s, %s type mismatch\n", __func__, _ep->name);
return -EINVAL;
}
if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
&& le16_to_cpu(desc->wMaxPacketSize) != ep_maxpacket(ep))
|| !desc->wMaxPacketSize) {
- DEBUG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name);
+ DEBUG("%s, bad %s maxpacket\n", __func__, _ep->name);
return -ERANGE;
}
dev = ep->dev;
if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
- DEBUG("%s, bogus device state\n", __FUNCTION__);
+ DEBUG("%s, bogus device state\n", __func__);
return -ESHUTDOWN;
}
/* Reset halt state (does flush) */
lh7a40x_set_halt(_ep, 0);
- DEBUG("%s: enabled %s\n", __FUNCTION__, _ep->name);
+ DEBUG("%s: enabled %s\n", __func__, _ep->name);
return 0;
}
struct lh7a40x_ep *ep;
unsigned long flags;
- DEBUG("%s, %p\n", __FUNCTION__, _ep);
+ DEBUG("%s, %p\n", __func__, _ep);
ep = container_of(_ep, struct lh7a40x_ep, ep);
if (!_ep || !ep->desc) {
- DEBUG("%s, %s not enabled\n", __FUNCTION__,
+ DEBUG("%s, %s not enabled\n", __func__,
_ep ? ep->ep.name : NULL);
return -EINVAL;
}
spin_unlock_irqrestore(&ep->dev->lock, flags);
- DEBUG("%s: disabled %s\n", __FUNCTION__, _ep->name);
+ DEBUG("%s: disabled %s\n", __func__, _ep->name);
return 0;
}
{
struct lh7a40x_request *req;
- DEBUG("%s, %p\n", __FUNCTION__, ep);
+ DEBUG("%s, %p\n", __func__, ep);
req = kzalloc(sizeof(*req), gfp_flags);
if (!req)
{
struct lh7a40x_request *req;
- DEBUG("%s, %p\n", __FUNCTION__, ep);
+ DEBUG("%s, %p\n", __func__, ep);
req = container_of(_req, struct lh7a40x_request, req);
WARN_ON(!list_empty(&req->queue));
struct lh7a40x_udc *dev;
unsigned long flags;
- DEBUG("\n\n\n%s, %p\n", __FUNCTION__, _ep);
+ DEBUG("\n\n\n%s, %p\n", __func__, _ep);
req = container_of(_req, struct lh7a40x_request, req);
if (unlikely
(!_req || !_req->complete || !_req->buf
|| !list_empty(&req->queue))) {
- DEBUG("%s, bad params\n", __FUNCTION__);
+ DEBUG("%s, bad params\n", __func__);
return -EINVAL;
}
ep = container_of(_ep, struct lh7a40x_ep, ep);
if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) {
- DEBUG("%s, bad ep\n", __FUNCTION__);
+ DEBUG("%s, bad ep\n", __func__);
return -EINVAL;
}
dev = ep->dev;
if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) {
- DEBUG("%s, bogus device state %p\n", __FUNCTION__, dev->driver);
+ DEBUG("%s, bogus device state %p\n", __func__, dev->driver);
return -ESHUTDOWN;
}
struct lh7a40x_request *req;
unsigned long flags;
- DEBUG("%s, %p\n", __FUNCTION__, _ep);
+ DEBUG("%s, %p\n", __func__, _ep);
ep = container_of(_ep, struct lh7a40x_ep, ep);
if (!_ep || ep->ep.name == ep0name)
ep = container_of(_ep, struct lh7a40x_ep, ep);
if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) {
- DEBUG("%s, bad ep\n", __FUNCTION__);
+ DEBUG("%s, bad ep\n", __func__);
return -EINVAL;
}
usb_set_index(ep_index(ep));
- DEBUG("%s, ep %d, val %d\n", __FUNCTION__, ep_index(ep), value);
+ DEBUG("%s, ep %d, val %d\n", __func__, ep_index(ep), value);
spin_lock_irqsave(&ep->dev->lock, flags);
ep = container_of(_ep, struct lh7a40x_ep, ep);
if (!_ep) {
- DEBUG("%s, bad ep\n", __FUNCTION__);
+ DEBUG("%s, bad ep\n", __func__);
return -ENODEV;
}
- DEBUG("%s, %d\n", __FUNCTION__, ep_index(ep));
+ DEBUG("%s, %d\n", __func__, ep_index(ep));
/* LPD can't report unclaimed bytes from IN fifos */
if (ep_is_in(ep))
ep = container_of(_ep, struct lh7a40x_ep, ep);
if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) {
- DEBUG("%s, bad ep\n", __FUNCTION__);
+ DEBUG("%s, bad ep\n", __func__);
return;
}
max = ep_maxpacket(ep);
- DEBUG_EP0("%s\n", __FUNCTION__);
+ DEBUG_EP0("%s\n", __func__);
count = write_packet(ep, req, max);
is_last = 1;
}
- DEBUG_EP0("%s: wrote %s %d bytes%s %d left %p\n", __FUNCTION__,
+ DEBUG_EP0("%s: wrote %s %d bytes%s %d left %p\n", __func__,
ep->ep.name, count,
is_last ? "/L" : "", req->req.length - req->req.actual, req);
unsigned bufferspace, count, is_short;
volatile u32 *fifo = (volatile u32 *)ep->fifo;
- DEBUG_EP0("%s\n", __FUNCTION__);
+ DEBUG_EP0("%s\n", __func__);
csr = usb_read(USB_EP0_CSR);
if (!(csr & USB_OUT_CSR1_OUT_PKT_RDY))
*/
static void udc_set_address(struct lh7a40x_udc *dev, unsigned char address)
{
- DEBUG_EP0("%s: %d\n", __FUNCTION__, address);
+ DEBUG_EP0("%s: %d\n", __func__, address);
/* c.f. 15.1.2.2 Table 15-4 address will be used after DATA_END is set */
dev->usb_address = address;
usb_set((address & USB_FA_FUNCTION_ADDR), USB_FA);
struct lh7a40x_ep *ep = &dev->ep[0];
int ret;
- DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
+ DEBUG_EP0("%s: %x\n", __func__, csr);
if (list_empty(&ep->queue))
req = 0;
if (ret) {
/* Done! */
DEBUG_EP0("%s: finished, waiting for status\n",
- __FUNCTION__);
+ __func__);
usb_set((EP0_CLR_OUT | EP0_DATA_END), USB_EP0_CSR);
dev->ep0state = WAIT_FOR_SETUP;
} else {
/* Not done yet.. */
- DEBUG_EP0("%s: not finished\n", __FUNCTION__);
+ DEBUG_EP0("%s: not finished\n", __func__);
usb_set(EP0_CLR_OUT, USB_EP0_CSR);
}
} else {
struct lh7a40x_ep *ep = &dev->ep[0];
int ret, need_zlp = 0;
- DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
+ DEBUG_EP0("%s: %x\n", __func__, csr);
if (list_empty(&ep->queue))
req = 0;
req = list_entry(ep->queue.next, struct lh7a40x_request, queue);
if (!req) {
- DEBUG_EP0("%s: NULL REQ\n", __FUNCTION__);
+ DEBUG_EP0("%s: NULL REQ\n", __func__);
return 0;
}
if (ret == 1 && !need_zlp) {
/* Last packet */
- DEBUG_EP0("%s: finished, waiting for status\n", __FUNCTION__);
+ DEBUG_EP0("%s: finished, waiting for status\n", __func__);
usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR);
dev->ep0state = WAIT_FOR_SETUP;
} else {
- DEBUG_EP0("%s: not finished\n", __FUNCTION__);
+ DEBUG_EP0("%s: not finished\n", __func__);
usb_set(EP0_IN_PKT_RDY, USB_EP0_CSR);
}
if (need_zlp) {
- DEBUG_EP0("%s: Need ZLP!\n", __FUNCTION__);
+ DEBUG_EP0("%s: Need ZLP!\n", __func__);
usb_set(EP0_IN_PKT_RDY, USB_EP0_CSR);
dev->ep0state = DATA_STATE_NEED_ZLP;
}
struct usb_ctrlrequest ctrl;
int i, bytes, is_in;
- DEBUG_SETUP("%s: %x\n", __FUNCTION__, csr);
+ DEBUG_SETUP("%s: %x\n", __func__, csr);
/* Nuke all previous transfers */
nuke(ep, -EPROTO);
*/
static void lh7a40x_ep0_in_zlp(struct lh7a40x_udc *dev, u32 csr)
{
- DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
+ DEBUG_EP0("%s: %x\n", __func__, csr);
/* c.f. Table 15-14 */
usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR);
usb_set_index(0);
csr = usb_read(USB_EP0_CSR);
- DEBUG_EP0("%s: csr = %x\n", __FUNCTION__, csr);
+ DEBUG_EP0("%s: csr = %x\n", __func__, csr);
/*
* For overview of what we should be doing see c.f. Chapter 18.1.2.4
* - clear the SENT_STALL bit
*/
if (csr & EP0_SENT_STALL) {
- DEBUG_EP0("%s: EP0_SENT_STALL is set: %x\n", __FUNCTION__, csr);
+ DEBUG_EP0("%s: EP0_SENT_STALL is set: %x\n", __func__, csr);
usb_clear((EP0_SENT_STALL | EP0_SEND_STALL), USB_EP0_CSR);
nuke(ep, -ECONNABORTED);
dev->ep0state = WAIT_FOR_SETUP;
*/
if (!(csr & (EP0_IN_PKT_RDY | EP0_OUT_PKT_RDY))) {
DEBUG_EP0("%s: IN_PKT_RDY and OUT_PKT_RDY are clear\n",
- __FUNCTION__);
+ __func__);
switch (dev->ep0state) {
case DATA_STATE_XMIT:
* - set SERVICED_SETUP_END_BIT
*/
if (csr & EP0_SETUP_END) {
- DEBUG_EP0("%s: EP0_SETUP_END is set: %x\n", __FUNCTION__, csr);
+ DEBUG_EP0("%s: EP0_SETUP_END is set: %x\n", __func__, csr);
usb_set(EP0_CLR_SETUP_END, USB_EP0_CSR);
*/
if (csr & EP0_OUT_PKT_RDY) {
- DEBUG_EP0("%s: EP0_OUT_PKT_RDY is set: %x\n", __FUNCTION__,
+ DEBUG_EP0("%s: EP0_OUT_PKT_RDY is set: %x\n", __func__,
csr);
switch (dev->ep0state) {
usb_set_index(0);
csr = usb_read(USB_EP0_CSR);
- DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
+ DEBUG_EP0("%s: %x\n", __func__, csr);
/* Clear "out packet ready" */
usb_set(EP0_CLR_OUT, USB_EP0_CSR);
{
u32 frame1 = usb_read(USB_FRM_NUM1); /* Least significant 8 bits */
u32 frame2 = usb_read(USB_FRM_NUM2); /* Most significant 3 bits */
- DEBUG("%s, %p\n", __FUNCTION__, _gadget);
+ DEBUG("%s, %p\n", __func__, _gadget);
return ((frame2 & 0x07) << 8) | (frame1 & 0xff);
}
static void nop_release(struct device *dev)
{
- DEBUG("%s %s\n", __FUNCTION__, dev->bus_id);
+ DEBUG("%s %s\n", __func__, dev->bus_id);
}
static struct lh7a40x_udc memory = {
struct lh7a40x_udc *dev = &memory;
int retval;
- DEBUG("%s: %p\n", __FUNCTION__, pdev);
+ DEBUG("%s: %p\n", __func__, pdev);
spin_lock_init(&dev->lock);
dev->dev = &pdev->dev;
{
struct lh7a40x_udc *dev = platform_get_drvdata(pdev);
- DEBUG("%s: %p\n", __FUNCTION__, pdev);
+ DEBUG("%s: %p\n", __func__, pdev);
if (dev->driver)
return -EBUSY;
static int __init udc_init(void)
{
- DEBUG("%s: %s version %s\n", __FUNCTION__, driver_name, DRIVER_VERSION);
+ DEBUG("%s: %s version %s\n", __func__, driver_name, DRIVER_VERSION);
return platform_driver_register(&udc_driver);
}
&ep->regs->ep_rsp);
}
}
-#define ASSERT_OUT_NAKING(ep) assert_out_naking(ep,__FUNCTION__)
+#define ASSERT_OUT_NAKING(ep) assert_out_naking(ep,__func__)
#else
#define ASSERT_OUT_NAKING(ep) do {} while (0)
#endif
|| ep->bEndpointAddress != desc->bEndpointAddress
|| ep->maxpacket < le16_to_cpu
(desc->wMaxPacketSize)) {
- DBG("%s, bad ep or descriptor\n", __FUNCTION__);
+ DBG("%s, bad ep or descriptor\n", __func__);
return -EINVAL;
}
maxp = le16_to_cpu (desc->wMaxPacketSize);
&& maxp != ep->maxpacket)
|| le16_to_cpu(desc->wMaxPacketSize) > ep->maxpacket
|| !desc->wMaxPacketSize) {
- DBG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name);
+ DBG("%s, bad %s maxpacket\n", __func__, _ep->name);
return -ERANGE;
}
if (ep->bmAttributes != desc->bmAttributes
&& ep->bmAttributes != USB_ENDPOINT_XFER_BULK
&& desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
- DBG("%s, %s type mismatch\n", __FUNCTION__, _ep->name);
+ DBG("%s, %s type mismatch\n", __func__, _ep->name);
return -EINVAL;
}
udc = ep->udc;
if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
- DBG("%s, bogus device state\n", __FUNCTION__);
+ DBG("%s, bogus device state\n", __func__);
return -ESHUTDOWN;
}
unsigned long flags;
if (!_ep || !ep->desc) {
- DBG("%s, %s not enabled\n", __FUNCTION__,
+ DBG("%s, %s not enabled\n", __func__,
_ep ? ep->ep.name : NULL);
return -EINVAL;
}
/* catch various bogus parameters */
if (!_req || !req->req.complete || !req->req.buf
|| !list_empty(&req->queue)) {
- DBG("%s, bad params\n", __FUNCTION__);
+ DBG("%s, bad params\n", __func__);
return -EINVAL;
}
if (!_ep || (!ep->desc && ep->bEndpointAddress)) {
- DBG("%s, bad ep\n", __FUNCTION__);
+ DBG("%s, bad ep\n", __func__);
return -EINVAL;
}
if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
&& (ep->bEndpointAddress & USB_DIR_IN) == 0
&& !cpu_class_is_omap2()
&& (req->req.length % ep->ep.maxpacket) != 0) {
- DBG("%s, no partial packet OUT reads\n", __FUNCTION__);
+ DBG("%s, no partial packet OUT reads\n", __func__);
return -EMSGSIZE;
}
if (dev->interface < 0)
return;
- DBG(dev, "%s\n", __FUNCTION__);
+ DBG(dev, "%s\n", __func__);
if (dev->in)
usb_ep_disable(dev->in_ep);
struct printer_dev *dev = get_gadget_data(gadget);
unsigned long flags;
- DBG(dev, "%s\n", __FUNCTION__);
+ DBG(dev, "%s\n", __func__);
spin_lock_irqsave(&dev->lock, flags);
struct usb_request *req;
- DBG(dev, "%s\n", __FUNCTION__);
+ DBG(dev, "%s\n", __func__);
/* Remove sysfs files */
device_destroy(usb_gadget_class, g_printer_devno);
|| ep->bEndpointAddress != desc->bEndpointAddress
|| ep->fifo_size < le16_to_cpu
(desc->wMaxPacketSize)) {
- DMSG("%s, bad ep or descriptor\n", __FUNCTION__);
+ DMSG("%s, bad ep or descriptor\n", __func__);
return -EINVAL;
}
if (ep->bmAttributes != desc->bmAttributes
&& ep->bmAttributes != USB_ENDPOINT_XFER_BULK
&& desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
- DMSG("%s, %s type mismatch\n", __FUNCTION__, _ep->name);
+ DMSG("%s, %s type mismatch\n", __func__, _ep->name);
return -EINVAL;
}
&& le16_to_cpu (desc->wMaxPacketSize)
!= BULK_FIFO_SIZE)
|| !desc->wMaxPacketSize) {
- DMSG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name);
+ DMSG("%s, bad %s maxpacket\n", __func__, _ep->name);
return -ERANGE;
}
dev = ep->dev;
if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
- DMSG("%s, bogus device state\n", __FUNCTION__);
+ DMSG("%s, bogus device state\n", __func__);
return -ESHUTDOWN;
}
ep = container_of (_ep, struct pxa2xx_ep, ep);
if (!_ep || !ep->desc) {
- DMSG("%s, %s not enabled\n", __FUNCTION__,
+ DMSG("%s, %s not enabled\n", __func__,
_ep ? ep->ep.name : NULL);
return -EINVAL;
}
USIR0 = USIR0_IR0;
dev->req_pending = 0;
DBG(DBG_VERY_NOISY, "%s %s, %02x/%02x\n",
- __FUNCTION__, tag, UDCCS0, flags);
+ __func__, tag, UDCCS0, flags);
}
static int
req = container_of(_req, struct pxa2xx_request, req);
if (unlikely (!_req || !_req->complete || !_req->buf
|| !list_empty(&req->queue))) {
- DMSG("%s, bad params\n", __FUNCTION__);
+ DMSG("%s, bad params\n", __func__);
return -EINVAL;
}
ep = container_of(_ep, struct pxa2xx_ep, ep);
if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) {
- DMSG("%s, bad ep\n", __FUNCTION__);
+ DMSG("%s, bad ep\n", __func__);
return -EINVAL;
}
dev = ep->dev;
if (unlikely (!dev->driver
|| dev->gadget.speed == USB_SPEED_UNKNOWN)) {
- DMSG("%s, bogus device state\n", __FUNCTION__);
+ DMSG("%s, bogus device state\n", __func__);
return -ESHUTDOWN;
}
if (unlikely (!_ep
|| (!ep->desc && ep->ep.name != ep0name))
|| ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
- DMSG("%s, bad ep\n", __FUNCTION__);
+ DMSG("%s, bad ep\n", __func__);
return -EINVAL;
}
if (value == 0) {
ep = container_of(_ep, struct pxa2xx_ep, ep);
if (!_ep) {
- DMSG("%s, bad ep\n", __FUNCTION__);
+ DMSG("%s, bad ep\n", __func__);
return -ENODEV;
}
/* pxa can't report unclaimed bytes from IN fifos */
ep = container_of(_ep, struct pxa2xx_ep, ep);
if (!_ep || ep->ep.name == ep0name || !list_empty(&ep->queue)) {
- DMSG("%s, bad ep\n", __FUNCTION__);
+ DMSG("%s, bad ep\n", __func__);
return;
}
static void nop_release (struct device *dev)
{
- DMSG("%s %s\n", __FUNCTION__, dev->bus_id);
+ DMSG("%s %s\n", __func__, dev->bus_id);
}
/* this uses load-time allocation and initialization (instead of
/* mandatory */
case OID_GEN_SUPPORTED_LIST:
- DBG("%s: OID_GEN_SUPPORTED_LIST\n", __FUNCTION__);
+ DBG("%s: OID_GEN_SUPPORTED_LIST\n", __func__);
length = sizeof (oid_supported_list);
count = length / sizeof (u32);
for (i = 0; i < count; i++)
/* mandatory */
case OID_GEN_HARDWARE_STATUS:
- DBG("%s: OID_GEN_HARDWARE_STATUS\n", __FUNCTION__);
+ DBG("%s: OID_GEN_HARDWARE_STATUS\n", __func__);
/* Bogus question!
* Hardware must be ready to receive high level protocols.
* BTW:
/* mandatory */
case OID_GEN_MEDIA_SUPPORTED:
- DBG("%s: OID_GEN_MEDIA_SUPPORTED\n", __FUNCTION__);
+ DBG("%s: OID_GEN_MEDIA_SUPPORTED\n", __func__);
*outbuf = cpu_to_le32 (rndis_per_dev_params [configNr].medium);
retval = 0;
break;
/* mandatory */
case OID_GEN_MEDIA_IN_USE:
- DBG("%s: OID_GEN_MEDIA_IN_USE\n", __FUNCTION__);
+ DBG("%s: OID_GEN_MEDIA_IN_USE\n", __func__);
/* one medium, one transport... (maybe you do it better) */
*outbuf = cpu_to_le32 (rndis_per_dev_params [configNr].medium);
retval = 0;
/* mandatory */
case OID_GEN_MAXIMUM_FRAME_SIZE:
- DBG("%s: OID_GEN_MAXIMUM_FRAME_SIZE\n", __FUNCTION__);
+ DBG("%s: OID_GEN_MAXIMUM_FRAME_SIZE\n", __func__);
if (rndis_per_dev_params [configNr].dev) {
*outbuf = cpu_to_le32 (
rndis_per_dev_params [configNr].dev->mtu);
/* mandatory */
case OID_GEN_LINK_SPEED:
if (rndis_debug > 1)
- DBG("%s: OID_GEN_LINK_SPEED\n", __FUNCTION__);
+ DBG("%s: OID_GEN_LINK_SPEED\n", __func__);
if (rndis_per_dev_params [configNr].media_state
== NDIS_MEDIA_STATE_DISCONNECTED)
*outbuf = __constant_cpu_to_le32 (0);
/* mandatory */
case OID_GEN_TRANSMIT_BLOCK_SIZE:
- DBG("%s: OID_GEN_TRANSMIT_BLOCK_SIZE\n", __FUNCTION__);
+ DBG("%s: OID_GEN_TRANSMIT_BLOCK_SIZE\n", __func__);
if (rndis_per_dev_params [configNr].dev) {
*outbuf = cpu_to_le32 (
rndis_per_dev_params [configNr].dev->mtu);
/* mandatory */
case OID_GEN_RECEIVE_BLOCK_SIZE:
- DBG("%s: OID_GEN_RECEIVE_BLOCK_SIZE\n", __FUNCTION__);
+ DBG("%s: OID_GEN_RECEIVE_BLOCK_SIZE\n", __func__);
if (rndis_per_dev_params [configNr].dev) {
*outbuf = cpu_to_le32 (
rndis_per_dev_params [configNr].dev->mtu);
/* mandatory */
case OID_GEN_VENDOR_ID:
- DBG("%s: OID_GEN_VENDOR_ID\n", __FUNCTION__);
+ DBG("%s: OID_GEN_VENDOR_ID\n", __func__);
*outbuf = cpu_to_le32 (
rndis_per_dev_params [configNr].vendorID);
retval = 0;
/* mandatory */
case OID_GEN_VENDOR_DESCRIPTION:
- DBG("%s: OID_GEN_VENDOR_DESCRIPTION\n", __FUNCTION__);
+ DBG("%s: OID_GEN_VENDOR_DESCRIPTION\n", __func__);
length = strlen (rndis_per_dev_params [configNr].vendorDescr);
memcpy (outbuf,
rndis_per_dev_params [configNr].vendorDescr, length);
break;
case OID_GEN_VENDOR_DRIVER_VERSION:
- DBG("%s: OID_GEN_VENDOR_DRIVER_VERSION\n", __FUNCTION__);
+ DBG("%s: OID_GEN_VENDOR_DRIVER_VERSION\n", __func__);
/* Created as LE */
*outbuf = rndis_driver_version;
retval = 0;
/* mandatory */
case OID_GEN_CURRENT_PACKET_FILTER:
- DBG("%s: OID_GEN_CURRENT_PACKET_FILTER\n", __FUNCTION__);
+ DBG("%s: OID_GEN_CURRENT_PACKET_FILTER\n", __func__);
*outbuf = cpu_to_le32 (*rndis_per_dev_params[configNr].filter);
retval = 0;
break;
/* mandatory */
case OID_GEN_MAXIMUM_TOTAL_SIZE:
- DBG("%s: OID_GEN_MAXIMUM_TOTAL_SIZE\n", __FUNCTION__);
+ DBG("%s: OID_GEN_MAXIMUM_TOTAL_SIZE\n", __func__);
*outbuf = __constant_cpu_to_le32(RNDIS_MAX_TOTAL_SIZE);
retval = 0;
break;
/* mandatory */
case OID_GEN_MEDIA_CONNECT_STATUS:
if (rndis_debug > 1)
- DBG("%s: OID_GEN_MEDIA_CONNECT_STATUS\n", __FUNCTION__);
+ DBG("%s: OID_GEN_MEDIA_CONNECT_STATUS\n", __func__);
*outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
.media_state);
retval = 0;
break;
case OID_GEN_PHYSICAL_MEDIUM:
- DBG("%s: OID_GEN_PHYSICAL_MEDIUM\n", __FUNCTION__);
+ DBG("%s: OID_GEN_PHYSICAL_MEDIUM\n", __func__);
*outbuf = __constant_cpu_to_le32 (0);
retval = 0;
break;
* versions emit undefined RNDIS messages. DOCUMENT ALL THESE!
*/
case OID_GEN_MAC_OPTIONS: /* from WinME */
- DBG("%s: OID_GEN_MAC_OPTIONS\n", __FUNCTION__);
+ DBG("%s: OID_GEN_MAC_OPTIONS\n", __func__);
*outbuf = __constant_cpu_to_le32(
NDIS_MAC_OPTION_RECEIVE_SERIALIZED
| NDIS_MAC_OPTION_FULL_DUPLEX);
/* mandatory */
case OID_GEN_XMIT_OK:
if (rndis_debug > 1)
- DBG("%s: OID_GEN_XMIT_OK\n", __FUNCTION__);
+ DBG("%s: OID_GEN_XMIT_OK\n", __func__);
if (rndis_per_dev_params [configNr].stats) {
*outbuf = cpu_to_le32 (
rndis_per_dev_params [configNr].stats->tx_packets -
/* mandatory */
case OID_GEN_RCV_OK:
if (rndis_debug > 1)
- DBG("%s: OID_GEN_RCV_OK\n", __FUNCTION__);
+ DBG("%s: OID_GEN_RCV_OK\n", __func__);
if (rndis_per_dev_params [configNr].stats) {
*outbuf = cpu_to_le32 (
rndis_per_dev_params [configNr].stats->rx_packets -
/* mandatory */
case OID_GEN_XMIT_ERROR:
if (rndis_debug > 1)
- DBG("%s: OID_GEN_XMIT_ERROR\n", __FUNCTION__);
+ DBG("%s: OID_GEN_XMIT_ERROR\n", __func__);
if (rndis_per_dev_params [configNr].stats) {
*outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
.stats->tx_errors);
/* mandatory */
case OID_GEN_RCV_ERROR:
if (rndis_debug > 1)
- DBG("%s: OID_GEN_RCV_ERROR\n", __FUNCTION__);
+ DBG("%s: OID_GEN_RCV_ERROR\n", __func__);
if (rndis_per_dev_params [configNr].stats) {
*outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
.stats->rx_errors);
/* mandatory */
case OID_GEN_RCV_NO_BUFFER:
- DBG("%s: OID_GEN_RCV_NO_BUFFER\n", __FUNCTION__);
+ DBG("%s: OID_GEN_RCV_NO_BUFFER\n", __func__);
if (rndis_per_dev_params [configNr].stats) {
*outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
.stats->rx_dropped);
#ifdef RNDIS_OPTIONAL_STATS
case OID_GEN_DIRECTED_BYTES_XMIT:
- DBG("%s: OID_GEN_DIRECTED_BYTES_XMIT\n", __FUNCTION__);
+ DBG("%s: OID_GEN_DIRECTED_BYTES_XMIT\n", __func__);
/*
* Aunt Tilly's size of shoes
* minus antarctica count of penguins
break;
case OID_GEN_DIRECTED_FRAMES_XMIT:
- DBG("%s: OID_GEN_DIRECTED_FRAMES_XMIT\n", __FUNCTION__);
+ DBG("%s: OID_GEN_DIRECTED_FRAMES_XMIT\n", __func__);
/* dito */
if (rndis_per_dev_params [configNr].stats) {
*outbuf = cpu_to_le32 (
break;
case OID_GEN_MULTICAST_BYTES_XMIT:
- DBG("%s: OID_GEN_MULTICAST_BYTES_XMIT\n", __FUNCTION__);
+ DBG("%s: OID_GEN_MULTICAST_BYTES_XMIT\n", __func__);
if (rndis_per_dev_params [configNr].stats) {
*outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
.stats->multicast*1234);
break;
case OID_GEN_MULTICAST_FRAMES_XMIT:
- DBG("%s: OID_GEN_MULTICAST_FRAMES_XMIT\n", __FUNCTION__);
+ DBG("%s: OID_GEN_MULTICAST_FRAMES_XMIT\n", __func__);
if (rndis_per_dev_params [configNr].stats) {
*outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
.stats->multicast);
break;
case OID_GEN_BROADCAST_BYTES_XMIT:
- DBG("%s: OID_GEN_BROADCAST_BYTES_XMIT\n", __FUNCTION__);
+ DBG("%s: OID_GEN_BROADCAST_BYTES_XMIT\n", __func__);
if (rndis_per_dev_params [configNr].stats) {
*outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
.stats->tx_packets/42*255);
break;
case OID_GEN_BROADCAST_FRAMES_XMIT:
- DBG("%s: OID_GEN_BROADCAST_FRAMES_XMIT\n", __FUNCTION__);
+ DBG("%s: OID_GEN_BROADCAST_FRAMES_XMIT\n", __func__);
if (rndis_per_dev_params [configNr].stats) {
*outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
.stats->tx_packets/42);
break;
case OID_GEN_DIRECTED_BYTES_RCV:
- DBG("%s: OID_GEN_DIRECTED_BYTES_RCV\n", __FUNCTION__);
+ DBG("%s: OID_GEN_DIRECTED_BYTES_RCV\n", __func__);
*outbuf = __constant_cpu_to_le32 (0);
retval = 0;
break;
case OID_GEN_DIRECTED_FRAMES_RCV:
- DBG("%s: OID_GEN_DIRECTED_FRAMES_RCV\n", __FUNCTION__);
+ DBG("%s: OID_GEN_DIRECTED_FRAMES_RCV\n", __func__);
*outbuf = __constant_cpu_to_le32 (0);
retval = 0;
break;
case OID_GEN_MULTICAST_BYTES_RCV:
- DBG("%s: OID_GEN_MULTICAST_BYTES_RCV\n", __FUNCTION__);
+ DBG("%s: OID_GEN_MULTICAST_BYTES_RCV\n", __func__);
if (rndis_per_dev_params [configNr].stats) {
*outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
.stats->multicast * 1111);
break;
case OID_GEN_MULTICAST_FRAMES_RCV:
- DBG("%s: OID_GEN_MULTICAST_FRAMES_RCV\n", __FUNCTION__);
+ DBG("%s: OID_GEN_MULTICAST_FRAMES_RCV\n", __func__);
if (rndis_per_dev_params [configNr].stats) {
*outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
.stats->multicast);
break;
case OID_GEN_BROADCAST_BYTES_RCV:
- DBG("%s: OID_GEN_BROADCAST_BYTES_RCV\n", __FUNCTION__);
+ DBG("%s: OID_GEN_BROADCAST_BYTES_RCV\n", __func__);
if (rndis_per_dev_params [configNr].stats) {
*outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
.stats->rx_packets/42*255);
break;
case OID_GEN_BROADCAST_FRAMES_RCV:
- DBG("%s: OID_GEN_BROADCAST_FRAMES_RCV\n", __FUNCTION__);
+ DBG("%s: OID_GEN_BROADCAST_FRAMES_RCV\n", __func__);
if (rndis_per_dev_params [configNr].stats) {
*outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
.stats->rx_packets/42);
break;
case OID_GEN_RCV_CRC_ERROR:
- DBG("%s: OID_GEN_RCV_CRC_ERROR\n", __FUNCTION__);
+ DBG("%s: OID_GEN_RCV_CRC_ERROR\n", __func__);
if (rndis_per_dev_params [configNr].stats) {
*outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
.stats->rx_crc_errors);
break;
case OID_GEN_TRANSMIT_QUEUE_LENGTH:
- DBG("%s: OID_GEN_TRANSMIT_QUEUE_LENGTH\n", __FUNCTION__);
+ DBG("%s: OID_GEN_TRANSMIT_QUEUE_LENGTH\n", __func__);
*outbuf = __constant_cpu_to_le32 (0);
retval = 0;
break;
/* mandatory */
case OID_802_3_PERMANENT_ADDRESS:
- DBG("%s: OID_802_3_PERMANENT_ADDRESS\n", __FUNCTION__);
+ DBG("%s: OID_802_3_PERMANENT_ADDRESS\n", __func__);
if (rndis_per_dev_params [configNr].dev) {
length = ETH_ALEN;
memcpy (outbuf,
/* mandatory */
case OID_802_3_CURRENT_ADDRESS:
- DBG("%s: OID_802_3_CURRENT_ADDRESS\n", __FUNCTION__);
+ DBG("%s: OID_802_3_CURRENT_ADDRESS\n", __func__);
if (rndis_per_dev_params [configNr].dev) {
length = ETH_ALEN;
memcpy (outbuf,
/* mandatory */
case OID_802_3_MULTICAST_LIST:
- DBG("%s: OID_802_3_MULTICAST_LIST\n", __FUNCTION__);
+ DBG("%s: OID_802_3_MULTICAST_LIST\n", __func__);
/* Multicast base address only */
*outbuf = __constant_cpu_to_le32 (0xE0000000);
retval = 0;
/* mandatory */
case OID_802_3_MAXIMUM_LIST_SIZE:
- DBG("%s: OID_802_3_MAXIMUM_LIST_SIZE\n", __FUNCTION__);
+ DBG("%s: OID_802_3_MAXIMUM_LIST_SIZE\n", __func__);
/* Multicast base address only */
*outbuf = __constant_cpu_to_le32 (1);
retval = 0;
break;
case OID_802_3_MAC_OPTIONS:
- DBG("%s: OID_802_3_MAC_OPTIONS\n", __FUNCTION__);
+ DBG("%s: OID_802_3_MAC_OPTIONS\n", __func__);
break;
/* ieee802.3 statistics OIDs (table 4-4) */
/* mandatory */
case OID_802_3_RCV_ERROR_ALIGNMENT:
- DBG("%s: OID_802_3_RCV_ERROR_ALIGNMENT\n", __FUNCTION__);
+ DBG("%s: OID_802_3_RCV_ERROR_ALIGNMENT\n", __func__);
if (rndis_per_dev_params [configNr].stats) {
*outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
.stats->rx_frame_errors);
/* mandatory */
case OID_802_3_XMIT_ONE_COLLISION:
- DBG("%s: OID_802_3_XMIT_ONE_COLLISION\n", __FUNCTION__);
+ DBG("%s: OID_802_3_XMIT_ONE_COLLISION\n", __func__);
*outbuf = __constant_cpu_to_le32 (0);
retval = 0;
break;
/* mandatory */
case OID_802_3_XMIT_MORE_COLLISIONS:
- DBG("%s: OID_802_3_XMIT_MORE_COLLISIONS\n", __FUNCTION__);
+ DBG("%s: OID_802_3_XMIT_MORE_COLLISIONS\n", __func__);
*outbuf = __constant_cpu_to_le32 (0);
retval = 0;
break;
#ifdef RNDIS_OPTIONAL_STATS
case OID_802_3_XMIT_DEFERRED:
- DBG("%s: OID_802_3_XMIT_DEFERRED\n", __FUNCTION__);
+ DBG("%s: OID_802_3_XMIT_DEFERRED\n", __func__);
/* TODO */
break;
case OID_802_3_XMIT_MAX_COLLISIONS:
- DBG("%s: OID_802_3_XMIT_MAX_COLLISIONS\n", __FUNCTION__);
+ DBG("%s: OID_802_3_XMIT_MAX_COLLISIONS\n", __func__);
/* TODO */
break;
case OID_802_3_RCV_OVERRUN:
- DBG("%s: OID_802_3_RCV_OVERRUN\n", __FUNCTION__);
+ DBG("%s: OID_802_3_RCV_OVERRUN\n", __func__);
/* TODO */
break;
case OID_802_3_XMIT_UNDERRUN:
- DBG("%s: OID_802_3_XMIT_UNDERRUN\n", __FUNCTION__);
+ DBG("%s: OID_802_3_XMIT_UNDERRUN\n", __func__);
/* TODO */
break;
case OID_802_3_XMIT_HEARTBEAT_FAILURE:
- DBG("%s: OID_802_3_XMIT_HEARTBEAT_FAILURE\n", __FUNCTION__);
+ DBG("%s: OID_802_3_XMIT_HEARTBEAT_FAILURE\n", __func__);
/* TODO */
break;
case OID_802_3_XMIT_TIMES_CRS_LOST:
- DBG("%s: OID_802_3_XMIT_TIMES_CRS_LOST\n", __FUNCTION__);
+ DBG("%s: OID_802_3_XMIT_TIMES_CRS_LOST\n", __func__);
/* TODO */
break;
case OID_802_3_XMIT_LATE_COLLISIONS:
- DBG("%s: OID_802_3_XMIT_LATE_COLLISIONS\n", __FUNCTION__);
+ DBG("%s: OID_802_3_XMIT_LATE_COLLISIONS\n", __func__);
/* TODO */
break;
#endif /* RNDIS_OPTIONAL_STATS */
#ifdef RNDIS_PM
/* power management OIDs (table 4-5) */
case OID_PNP_CAPABILITIES:
- DBG("%s: OID_PNP_CAPABILITIES\n", __FUNCTION__);
+ DBG("%s: OID_PNP_CAPABILITIES\n", __func__);
/* for now, no wakeup capabilities */
length = sizeof (struct NDIS_PNP_CAPABILITIES);
retval = 0;
break;
case OID_PNP_QUERY_POWER:
- DBG("%s: OID_PNP_QUERY_POWER D%d\n", __FUNCTION__,
+ DBG("%s: OID_PNP_QUERY_POWER D%d\n", __func__,
le32_to_cpu(get_unaligned((__le32 *)buf)) - 1);
/* only suspend is a real power state, and
* it can't be entered by OID_PNP_SET_POWER...
default:
pr_warning("%s: query unknown OID 0x%08X\n",
- __FUNCTION__, OID);
+ __func__, OID);
}
if (retval < 0)
length = 0;
*params->filter = (u16) le32_to_cpu(get_unaligned(
(__le32 *)buf));
DBG("%s: OID_GEN_CURRENT_PACKET_FILTER %08x\n",
- __FUNCTION__, *params->filter);
+ __func__, *params->filter);
/* this call has a significant side effect: it's
* what makes the packet flow start and stop, like
case OID_802_3_MULTICAST_LIST:
/* I think we can ignore this */
- DBG("%s: OID_802_3_MULTICAST_LIST\n", __FUNCTION__);
+ DBG("%s: OID_802_3_MULTICAST_LIST\n", __func__);
retval = 0;
break;
#if 0
struct rndis_config_parameter *param;
param = (struct rndis_config_parameter *) buf;
DBG("%s: OID_GEN_RNDIS_CONFIG_PARAMETER '%*s'\n",
- __FUNCTION__,
+ __func__,
min(cpu_to_le32(param->ParameterNameLength),80),
buf + param->ParameterNameOffset);
retval = 0;
* FIXME ... then things go batty; Windows wedges itself.
*/
i = le32_to_cpu(get_unaligned((__le32 *)buf));
- DBG("%s: OID_PNP_SET_POWER D%d\n", __FUNCTION__, i - 1);
+ DBG("%s: OID_PNP_SET_POWER D%d\n", __func__, i - 1);
switch (i) {
case NdisDeviceStateD0:
*params->filter = params->saved_filter;
default:
pr_warning("%s: set unknown OID 0x%08X, size %d\n",
- __FUNCTION__, OID, buf_len);
+ __func__, OID, buf_len);
}
return retval;
rndis_query_cmplt_type *resp;
rndis_resp_t *r;
- // DBG("%s: OID = %08X\n", __FUNCTION__, cpu_to_le32(buf->OID));
+ // DBG("%s: OID = %08X\n", __func__, cpu_to_le32(buf->OID));
if (!rndis_per_dev_params [configNr].dev) return -ENOTSUPP;
/*
BufOffset = le32_to_cpu (buf->InformationBufferOffset);
#ifdef VERBOSE
- DBG("%s: Length: %d\n", __FUNCTION__, BufLength);
- DBG("%s: Offset: %d\n", __FUNCTION__, BufOffset);
- DBG("%s: InfoBuffer: ", __FUNCTION__);
+ DBG("%s: Length: %d\n", __func__, BufLength);
+ DBG("%s: Offset: %d\n", __func__, BufOffset);
+ DBG("%s: InfoBuffer: ", __func__);
for (i = 0; i < BufLength; i++) {
DBG("%02x ", *(((u8 *) buf) + i + 8 + BufOffset));
switch (MsgType) {
case REMOTE_NDIS_INITIALIZE_MSG:
DBG("%s: REMOTE_NDIS_INITIALIZE_MSG\n",
- __FUNCTION__ );
+ __func__ );
params->state = RNDIS_INITIALIZED;
return rndis_init_response (configNr,
(rndis_init_msg_type *) buf);
case REMOTE_NDIS_HALT_MSG:
DBG("%s: REMOTE_NDIS_HALT_MSG\n",
- __FUNCTION__ );
+ __func__ );
params->state = RNDIS_UNINITIALIZED;
if (params->dev) {
netif_carrier_off (params->dev);
case REMOTE_NDIS_RESET_MSG:
DBG("%s: REMOTE_NDIS_RESET_MSG\n",
- __FUNCTION__ );
+ __func__ );
return rndis_reset_response (configNr,
(rndis_reset_msg_type *) buf);
/* For USB: host does this every 5 seconds */
if (rndis_debug > 1)
DBG("%s: REMOTE_NDIS_KEEPALIVE_MSG\n",
- __FUNCTION__ );
+ __func__ );
return rndis_keepalive_response (configNr,
(rndis_keepalive_msg_type *)
buf);
* suspending itself.
*/
pr_warning("%s: unknown RNDIS message 0x%08X len %d\n",
- __FUNCTION__ , MsgType, MsgLength);
+ __func__ , MsgType, MsgLength);
{
unsigned i;
for (i = 0; i < MsgLength; i += 16) {
if (!rndis_per_dev_params [i].used) {
rndis_per_dev_params [i].used = 1;
rndis_per_dev_params [i].ack = rndis_control_ack;
- DBG("%s: configNr = %d\n", __FUNCTION__, i);
+ DBG("%s: configNr = %d\n", __func__, i);
return i;
}
}
void rndis_deregister (int configNr)
{
- DBG("%s: \n", __FUNCTION__ );
+ DBG("%s: \n", __func__ );
if (configNr >= RNDIS_MAX_CONFIGS) return;
rndis_per_dev_params [configNr].used = 0;
struct net_device_stats *stats,
u16 *cdc_filter)
{
- DBG("%s:\n", __FUNCTION__ );
+ DBG("%s:\n", __func__ );
if (!dev || !stats) return -1;
if (configNr >= RNDIS_MAX_CONFIGS) return -1;
int rndis_set_param_vendor (u8 configNr, u32 vendorID, const char *vendorDescr)
{
- DBG("%s:\n", __FUNCTION__ );
+ DBG("%s:\n", __func__ );
if (!vendorDescr) return -1;
if (configNr >= RNDIS_MAX_CONFIGS) return -1;
int rndis_set_param_medium (u8 configNr, u32 medium, u32 speed)
{
- DBG("%s: %u %u\n", __FUNCTION__, medium, speed);
+ DBG("%s: %u %u\n", __func__, medium, speed);
if (configNr >= RNDIS_MAX_CONFIGS) return -1;
rndis_per_dev_params [configNr].medium = medium;
if (!(rndis_connect_state [i]
= create_proc_entry (name, 0660, NULL)))
{
- DBG("%s :remove entries", __FUNCTION__);
+ DBG("%s :remove entries", __func__);
while (i) {
sprintf (name, NAME_TEMPLATE, --i);
remove_proc_entry (name, NULL);
#ifdef EHCI_URB_TRACE
ehci_dbg (ehci,
"%s %s urb %p ep%d%s status %d len %d/%d\n",
- __FUNCTION__, urb->dev->devpath, urb,
+ __func__, urb->dev->devpath, urb,
usb_pipeendpoint (urb->pipe),
usb_pipein (urb->pipe) ? "in" : "out",
status,
#ifdef EHCI_URB_TRACE
ehci_dbg (ehci,
"%s %s urb %p ep%d%s len %d, qtd %p [qh %p]\n",
- __FUNCTION__, urb->dev->devpath, urb,
+ __func__, urb->dev->devpath, urb,
epnum & 0x0f, (epnum & USB_DIR_IN) ? "in" : "out",
urb->transfer_buffer_length,
qtd, urb->ep->hcpriv);
#ifdef EHCI_URB_TRACE
ehci_dbg (ehci,
"%s %s urb %p ep%d%s len %d, %d pkts %d uframes [%p]\n",
- __FUNCTION__, urb->dev->devpath, urb,
+ __func__, urb->dev->devpath, urb,
usb_pipeendpoint (urb->pipe),
usb_pipein (urb->pipe) ? "in" : "out",
urb->transfer_buffer_length,
pci_read_config_word(pdev, UHCI_USBLEGSUP, &legsup);
if (legsup & ~(UHCI_USBLEGSUP_RO | UHCI_USBLEGSUP_RWC)) {
dev_dbg(&pdev->dev, "%s: legsup = 0x%04x\n",
- __FUNCTION__, legsup);
+ __func__, legsup);
goto reset_needed;
}
if ((cmd & UHCI_USBCMD_RUN) || !(cmd & UHCI_USBCMD_CONFIGURE) ||
!(cmd & UHCI_USBCMD_EGSM)) {
dev_dbg(&pdev->dev, "%s: cmd = 0x%04x\n",
- __FUNCTION__, cmd);
+ __func__, cmd);
goto reset_needed;
}
intr = inw(base + UHCI_USBINTR);
if (intr & (~UHCI_USBINTR_RESUME)) {
dev_dbg(&pdev->dev, "%s: intr = 0x%04x\n",
- __FUNCTION__, intr);
+ __func__, intr);
goto reset_needed;
}
return 0;
sl811h_bus_suspend(struct usb_hcd *hcd)
{
// SOFs off
- DBG("%s\n", __FUNCTION__);
+ DBG("%s\n", __func__);
return 0;
}
sl811h_bus_resume(struct usb_hcd *hcd)
{
// SOFs on
- DBG("%s\n", __FUNCTION__);
+ DBG("%s\n", __func__);
return 0;
}
__acquires(uhci->lock)
{
dev_dbg(&uhci_to_hcd(uhci)->self.root_hub->dev,
- "%s%s\n", __FUNCTION__,
+ "%s%s\n", __func__,
uhci->rh_state == UHCI_RH_AUTO_STOPPED ?
" (auto-start)" : "");
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
int rc = 0;
- dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
+ dev_dbg(uhci_dev(uhci), "%s\n", __func__);
spin_lock_irq(&uhci->lock);
if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
- dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
+ dev_dbg(uhci_dev(uhci), "%s\n", __func__);
/* Since we aren't in D3 any more, it's safe to set this flag
* even if the controller was dead.
/* Some debugging code */
dev_dbg(&urb->dev->dev,
"%s: failed with status %x\n",
- __FUNCTION__, status);
+ __func__, status);
if (debug > 1 && errbuf) {
/* Print the chain for debugging */
{
unsigned long flags;
- dbg(2," %s : enter", __FUNCTION__);
+ dbg(2," %s : enter", __func__);
if (dev->udev == NULL) {
- dbg(1," %s : udev is null", __FUNCTION__);
+ dbg(1," %s : udev is null", __func__);
goto exit;
}
spin_unlock_irqrestore(&dev->buflock, flags);
exit:
- dbg(2," %s : leave", __FUNCTION__);
+ dbg(2," %s : leave", __func__);
}
static void adu_delete(struct adu_device *dev)
{
- dbg(2, "%s enter", __FUNCTION__);
+ dbg(2, "%s enter", __func__);
/* free data structures */
usb_free_urb(dev->interrupt_in_urb);
kfree(dev->interrupt_out_buffer);
kfree(dev);
- dbg(2, "%s : leave", __FUNCTION__);
+ dbg(2, "%s : leave", __func__);
}
static void adu_interrupt_in_callback(struct urb *urb)
struct adu_device *dev = urb->context;
int status = urb->status;
- dbg(4," %s : enter, status %d", __FUNCTION__, status);
- adu_debug_data(5, __FUNCTION__, urb->actual_length,
+ dbg(4," %s : enter, status %d", __func__, status);
+ adu_debug_data(5, __func__, urb->actual_length,
urb->transfer_buffer);
spin_lock(&dev->buflock);
if ((status != -ENOENT) && (status != -ECONNRESET) &&
(status != -ESHUTDOWN)) {
dbg(1," %s : nonzero status received: %d",
- __FUNCTION__, status);
+ __func__, status);
}
goto exit;
}
dev->interrupt_in_buffer, urb->actual_length);
dev->read_buffer_length += urb->actual_length;
- dbg(2," %s reading %d ", __FUNCTION__,
+ dbg(2," %s reading %d ", __func__,
urb->actual_length);
} else {
- dbg(1," %s : read_buffer overflow", __FUNCTION__);
+ dbg(1," %s : read_buffer overflow", __func__);
}
}
spin_unlock(&dev->buflock);
/* always wake up so we recover from errors */
wake_up_interruptible(&dev->read_wait);
- adu_debug_data(5, __FUNCTION__, urb->actual_length,
+ adu_debug_data(5, __func__, urb->actual_length,
urb->transfer_buffer);
- dbg(4," %s : leave, status %d", __FUNCTION__, status);
+ dbg(4," %s : leave, status %d", __func__, status);
}
static void adu_interrupt_out_callback(struct urb *urb)
struct adu_device *dev = urb->context;
int status = urb->status;
- dbg(4," %s : enter, status %d", __FUNCTION__, status);
- adu_debug_data(5,__FUNCTION__, urb->actual_length, urb->transfer_buffer);
+ dbg(4," %s : enter, status %d", __func__, status);
+ adu_debug_data(5,__func__, urb->actual_length, urb->transfer_buffer);
if (status != 0) {
if ((status != -ENOENT) &&
(status != -ECONNRESET)) {
dbg(1, " %s :nonzero status received: %d",
- __FUNCTION__, status);
+ __func__, status);
}
goto exit;
}
spin_unlock(&dev->buflock);
exit:
- adu_debug_data(5, __FUNCTION__, urb->actual_length,
+ adu_debug_data(5, __func__, urb->actual_length,
urb->transfer_buffer);
- dbg(4," %s : leave, status %d", __FUNCTION__, status);
+ dbg(4," %s : leave, status %d", __func__, status);
}
static int adu_open(struct inode *inode, struct file *file)
int subminor;
int retval;
- dbg(2,"%s : enter", __FUNCTION__);
+ dbg(2,"%s : enter", __func__);
subminor = iminor(inode);
if ((retval = mutex_lock_interruptible(&adutux_mutex))) {
- dbg(2, "%s : mutex lock failed", __FUNCTION__);
+ dbg(2, "%s : mutex lock failed", __func__);
goto exit_no_lock;
}
interface = usb_find_interface(&adu_driver, subminor);
if (!interface) {
err("%s - error, can't find device for minor %d",
- __FUNCTION__, subminor);
+ __func__, subminor);
retval = -ENODEV;
goto exit_no_device;
}
}
++dev->open_count;
- dbg(2,"%s : open count %d", __FUNCTION__, dev->open_count);
+ dbg(2,"%s : open count %d", __func__, dev->open_count);
/* save device in the file's private structure */
file->private_data = dev;
exit_no_device:
mutex_unlock(&adutux_mutex);
exit_no_lock:
- dbg(2,"%s : leave, return value %d ", __FUNCTION__, retval);
+ dbg(2,"%s : leave, return value %d ", __func__, retval);
return retval;
}
static void adu_release_internal(struct adu_device *dev)
{
- dbg(2," %s : enter", __FUNCTION__);
+ dbg(2," %s : enter", __func__);
/* decrement our usage count for the device */
--dev->open_count;
- dbg(2," %s : open count %d", __FUNCTION__, dev->open_count);
+ dbg(2," %s : open count %d", __func__, dev->open_count);
if (dev->open_count <= 0) {
adu_abort_transfers(dev);
dev->open_count = 0;
}
- dbg(2," %s : leave", __FUNCTION__);
+ dbg(2," %s : leave", __func__);
}
static int adu_release(struct inode *inode, struct file *file)
struct adu_device *dev;
int retval = 0;
- dbg(2," %s : enter", __FUNCTION__);
+ dbg(2," %s : enter", __func__);
if (file == NULL) {
- dbg(1," %s : file is NULL", __FUNCTION__);
+ dbg(1," %s : file is NULL", __func__);
retval = -ENODEV;
goto exit;
}
dev = file->private_data;
if (dev == NULL) {
- dbg(1," %s : object is NULL", __FUNCTION__);
+ dbg(1," %s : object is NULL", __func__);
retval = -ENODEV;
goto exit;
}
mutex_lock(&adutux_mutex); /* not interruptible */
if (dev->open_count <= 0) {
- dbg(1," %s : device not opened", __FUNCTION__);
+ dbg(1," %s : device not opened", __func__);
retval = -ENODEV;
goto exit;
}
exit:
mutex_unlock(&adutux_mutex);
- dbg(2," %s : leave, return value %d", __FUNCTION__, retval);
+ dbg(2," %s : leave, return value %d", __func__, retval);
return retval;
}
unsigned long flags;
DECLARE_WAITQUEUE(wait, current);
- dbg(2," %s : enter, count = %Zd, file=%p", __FUNCTION__, count, file);
+ dbg(2," %s : enter, count = %Zd, file=%p", __func__, count, file);
dev = file->private_data;
- dbg(2," %s : dev=%p", __FUNCTION__, dev);
+ dbg(2," %s : dev=%p", __func__, dev);
if (mutex_lock_interruptible(&dev->mtx))
return -ERESTARTSYS;
/* verify that some data was requested */
if (count == 0) {
- dbg(1," %s : read request of 0 bytes", __FUNCTION__);
+ dbg(1," %s : read request of 0 bytes", __func__);
goto exit;
}
timeout = COMMAND_TIMEOUT;
- dbg(2," %s : about to start looping", __FUNCTION__);
+ dbg(2," %s : about to start looping", __func__);
while (bytes_to_read) {
int data_in_secondary = dev->secondary_tail - dev->secondary_head;
dbg(2," %s : while, data_in_secondary=%d, status=%d",
- __FUNCTION__, data_in_secondary,
+ __func__, data_in_secondary,
dev->interrupt_in_urb->status);
if (data_in_secondary) {
/* we secure access to the primary */
char *tmp;
dbg(2," %s : swap, read_buffer_length = %d",
- __FUNCTION__, dev->read_buffer_length);
+ __func__, dev->read_buffer_length);
tmp = dev->read_buffer_secondary;
dev->read_buffer_secondary = dev->read_buffer_primary;
dev->read_buffer_primary = tmp;
if (!dev->read_urb_finished) {
/* somebody is doing IO */
spin_unlock_irqrestore(&dev->buflock, flags);
- dbg(2," %s : submitted already", __FUNCTION__);
+ dbg(2," %s : submitted already", __func__);
} else {
/* we must initiate input */
- dbg(2," %s : initiate input", __FUNCTION__);
+ dbg(2," %s : initiate input", __func__);
dev->read_urb_finished = 0;
spin_unlock_irqrestore(&dev->buflock, flags);
if (retval == -ENOMEM) {
retval = bytes_read ? bytes_read : -ENOMEM;
}
- dbg(2," %s : submit failed", __FUNCTION__);
+ dbg(2," %s : submit failed", __func__);
goto exit;
}
}
remove_wait_queue(&dev->read_wait, &wait);
if (timeout <= 0) {
- dbg(2," %s : timeout", __FUNCTION__);
+ dbg(2," %s : timeout", __func__);
retval = bytes_read ? bytes_read : -ETIMEDOUT;
goto exit;
}
if (signal_pending(current)) {
- dbg(2," %s : signal pending", __FUNCTION__);
+ dbg(2," %s : signal pending", __func__);
retval = bytes_read ? bytes_read : -EINTR;
goto exit;
}
/* unlock the device */
mutex_unlock(&dev->mtx);
- dbg(2," %s : leave, return value %d", __FUNCTION__, retval);
+ dbg(2," %s : leave, return value %d", __func__, retval);
return retval;
}
unsigned long flags;
int retval;
- dbg(2," %s : enter, count = %Zd", __FUNCTION__, count);
+ dbg(2," %s : enter, count = %Zd", __func__, count);
dev = file->private_data;
/* verify that we actually have some data to write */
if (count == 0) {
- dbg(1," %s : write request of 0 bytes", __FUNCTION__);
+ dbg(1," %s : write request of 0 bytes", __func__);
goto exit;
}
mutex_unlock(&dev->mtx);
if (signal_pending(current)) {
- dbg(1," %s : interrupted", __FUNCTION__);
+ dbg(1," %s : interrupted", __func__);
set_current_state(TASK_RUNNING);
retval = -EINTR;
goto exit_onqueue;
}
if (schedule_timeout(COMMAND_TIMEOUT) == 0) {
- dbg(1, "%s - command timed out.", __FUNCTION__);
+ dbg(1, "%s - command timed out.", __func__);
retval = -ETIMEDOUT;
goto exit_onqueue;
}
goto exit_nolock;
}
- dbg(4," %s : in progress, count = %Zd", __FUNCTION__, count);
+ dbg(4," %s : in progress, count = %Zd", __func__, count);
} else {
spin_unlock_irqrestore(&dev->buflock, flags);
set_current_state(TASK_RUNNING);
remove_wait_queue(&dev->write_wait, &waita);
- dbg(4," %s : sending, count = %Zd", __FUNCTION__, count);
+ dbg(4," %s : sending, count = %Zd", __func__, count);
/* write the data into interrupt_out_buffer from userspace */
buffer_size = le16_to_cpu(dev->interrupt_out_endpoint->wMaxPacketSize);
bytes_to_write = count > buffer_size ? buffer_size : count;
dbg(4," %s : buffer_size = %Zd, count = %Zd, bytes_to_write = %Zd",
- __FUNCTION__, buffer_size, count, bytes_to_write);
+ __func__, buffer_size, count, bytes_to_write);
if (copy_from_user(dev->interrupt_out_buffer, buffer, bytes_to_write) != 0) {
retval = -EFAULT;
exit:
mutex_unlock(&dev->mtx);
exit_nolock:
- dbg(2," %s : leave, return value %d", __FUNCTION__, retval);
+ dbg(2," %s : leave, return value %d", __func__, retval);
return retval;
exit_onqueue:
int out_end_size;
int i;
- dbg(2," %s : enter", __FUNCTION__);
+ dbg(2," %s : enter", __func__);
if (udev == NULL) {
dev_err(&interface->dev, "udev is NULL.\n");
dev_err(&interface->dev, "Could not retrieve serial number\n");
goto error;
}
- dbg(2," %s : serial_number=%s", __FUNCTION__, dev->serial_number);
+ dbg(2," %s : serial_number=%s", __func__, dev->serial_number);
/* we can register the device now, as it is ready */
usb_set_intfdata(interface, dev);
udev->descriptor.idProduct, dev->serial_number,
(dev->minor - ADU_MINOR_BASE));
exit:
- dbg(2," %s : leave, return value %p (dev)", __FUNCTION__, dev);
+ dbg(2," %s : leave, return value %p (dev)", __func__, dev);
return retval;
struct adu_device *dev;
int minor;
- dbg(2," %s : enter", __FUNCTION__);
+ dbg(2," %s : enter", __func__);
dev = usb_get_intfdata(interface);
usb_set_intfdata(interface, NULL);
/* if the device is not opened, then we clean up right now */
- dbg(2," %s : open count %d", __FUNCTION__, dev->open_count);
+ dbg(2," %s : open count %d", __func__, dev->open_count);
if (!dev->open_count)
adu_delete(dev);
dev_info(&interface->dev, "ADU device adutux%d now disconnected\n",
(minor - ADU_MINOR_BASE));
- dbg(2," %s : leave", __FUNCTION__);
+ dbg(2," %s : leave", __func__);
}
/* usb specific object needed to register this driver with the usb subsystem */
{
int result;
- dbg(2," %s : enter", __FUNCTION__);
+ dbg(2," %s : enter", __func__);
/* register this driver with the USB subsystem */
result = usb_register(&adu_driver);
info("adutux is an experimental driver. Use at your own risk");
exit:
- dbg(2," %s : leave, return value %d", __FUNCTION__, result);
+ dbg(2," %s : leave, return value %d", __func__, result);
return result;
}
static void __exit adu_exit(void)
{
- dbg(2," %s : enter", __FUNCTION__);
+ dbg(2," %s : enter", __func__);
/* deregister this driver with the USB subsystem */
usb_deregister(&adu_driver);
- dbg(2," %s : leave", __FUNCTION__);
+ dbg(2," %s : leave", __func__);
}
module_init(adu_init);
case -ESHUTDOWN:
/* This urb is terminated, clean up */
dbg("%s - urb shuttingdown with status: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
default:
dbg("%s - nonzero urb status received: %d",
- __FUNCTION__, status);
+ __func__, status);
goto exit;
}
retval = usb_submit_urb(pdata->urb, GFP_ATOMIC);
if (retval) {
err("%s - usb_submit_urb failed with result %d",
- __FUNCTION__, retval);
+ __func__, retval);
}
}
pauerbuf_t bp = NULL;
pauerswald_t cp = (pauerswald_t) urb->context;
- dbg ("%s called", __FUNCTION__);
+ dbg ("%s called", __func__);
switch (status) {
case 0:
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __FUNCTION__, status);
+ dbg("%s - urb shutting down with status: %d", __func__, status);
return;
default:
- dbg("%s - nonzero urb status received: %d", __FUNCTION__, status);
+ dbg("%s - nonzero urb status received: %d", __func__, status);
goto exit;
}
ret = usb_submit_urb (urb, GFP_ATOMIC);
if (ret)
err ("%s - usb_submit_urb failed with result %d",
- __FUNCTION__, ret);
+ __func__, ret);
}
/* int memory deallocation
static int emi26_set_reset (struct usb_device *dev, unsigned char reset_bit)
{
int response;
- info("%s - %d", __FUNCTION__, reset_bit);
- /* printk(KERN_DEBUG "%s - %d", __FUNCTION__, reset_bit); */
+ info("%s - %d", __func__, reset_bit);
+ /* printk(KERN_DEBUG "%s - %d", __func__, reset_bit); */
response = emi26_writememory (dev, CPUCS_REG, &reset_bit, 1, 0xa0);
if (response < 0) {
err("emi26: set_reset (%d) failed", reset_bit);
buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL);
if (!buf) {
- err( "%s - error loading firmware: error = %d", __FUNCTION__, -ENOMEM);
+ err( "%s - error loading firmware: error = %d", __func__, -ENOMEM);
err = -ENOMEM;
goto wraperr;
}
/* Assert reset (stop the CPU in the EMI) */
err = emi26_set_reset(dev,1);
if (err < 0) {
- err( "%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err( "%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
for (i=0; g_Loader[i].type == 0; i++) {
err = emi26_writememory(dev, g_Loader[i].address, g_Loader[i].data, g_Loader[i].length, ANCHOR_LOAD_INTERNAL);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
}
/* De-assert reset (let the CPU run) */
err = emi26_set_reset(dev,0);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
msleep(250); /* let device settle */
}
err = emi26_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
} while (i > 0);
/* Assert reset (stop the CPU in the EMI) */
err = emi26_set_reset(dev,1);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
for (i=0; g_Loader[i].type == 0; i++) {
err = emi26_writememory(dev, g_Loader[i].address, g_Loader[i].data, g_Loader[i].length, ANCHOR_LOAD_INTERNAL);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
}
/* De-assert reset (let the CPU run) */
err = emi26_set_reset(dev,0);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
if (!INTERNAL_RAM(g_Firmware[i].address)) {
err = emi26_writememory(dev, g_Firmware[i].address, g_Firmware[i].data, g_Firmware[i].length, ANCHOR_LOAD_EXTERNAL);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
}
/* Assert reset (stop the CPU in the EMI) */
err = emi26_set_reset(dev,1);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
if (INTERNAL_RAM(g_Firmware[i].address)) {
err = emi26_writememory(dev, g_Firmware[i].address, g_Firmware[i].data, g_Firmware[i].length, ANCHOR_LOAD_INTERNAL);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
}
/* De-assert reset (let the CPU run) */
err = emi26_set_reset(dev,0);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
msleep(250); /* let device settle */
{
struct usb_device *dev = interface_to_usbdev(intf);
- info("%s start", __FUNCTION__);
+ info("%s start", __func__);
emi26_load_firmware(dev);
static int emi62_set_reset (struct usb_device *dev, unsigned char reset_bit)
{
int response;
- info("%s - %d", __FUNCTION__, reset_bit);
+ info("%s - %d", __func__, reset_bit);
response = emi62_writememory (dev, CPUCS_REG, &reset_bit, 1, 0xa0);
if (response < 0) {
dev_dbg(&dev->dev, "load_firmware\n");
buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL);
if (!buf) {
- err( "%s - error loading firmware: error = %d", __FUNCTION__, -ENOMEM);
+ err( "%s - error loading firmware: error = %d", __func__, -ENOMEM);
err = -ENOMEM;
goto wraperr;
}
/* Assert reset (stop the CPU in the EMI) */
err = emi62_set_reset(dev,1);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
for (i=0; g_emi62_loader[i].type == 0; i++) {
err = emi62_writememory(dev, g_emi62_loader[i].address, g_emi62_loader[i].data, g_emi62_loader[i].length, ANCHOR_LOAD_INTERNAL);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
}
/* De-assert reset (let the CPU run) */
err = emi62_set_reset(dev,0);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
msleep(250); /* let device settle */
}
err = emi62_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
} while (i > 0);
/* Assert reset (stop the CPU in the EMI) */
err = emi62_set_reset(dev,1);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
for (i=0; g_emi62_loader[i].type == 0; i++) {
err = emi62_writememory(dev, g_emi62_loader[i].address, g_emi62_loader[i].data, g_emi62_loader[i].length, ANCHOR_LOAD_INTERNAL);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
}
/* De-assert reset (let the CPU run) */
err = emi62_set_reset(dev,0);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
msleep(250); /* let device settle */
if (!INTERNAL_RAM(g_HexSpdifFw62[i].address)) {
err = emi62_writememory(dev, g_HexSpdifFw62[i].address, g_HexSpdifFw62[i].data, g_HexSpdifFw62[i].length, ANCHOR_LOAD_EXTERNAL);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
}
if (!INTERNAL_RAM(g_HexMidiFw62[i].address)) {
err = emi62_writememory(dev, g_HexMidiFw62[i].address, g_HexMidiFw62[i].data, g_HexMidiFw62[i].length, ANCHOR_LOAD_EXTERNAL);
if (err < 0) {
- err("%s - error loading firmware: error = %d\n", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d\n", __func__, err);
goto wraperr;
return err;
}
/* Assert reset (stop the CPU in the EMI) */
err = emi62_set_reset(dev,1);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
if (INTERNAL_RAM(g_HexSpdifFw62[i].address)) {
err = emi62_writememory(dev, g_HexSpdifFw62[i].address, g_HexSpdifFw62[i].data, g_HexSpdifFw62[i].length, ANCHOR_LOAD_INTERNAL);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
}
if (INTERNAL_RAM(g_HexMidiFw62[i].address)) {
err = emi62_writememory(dev, g_HexMidiFw62[i].address, g_HexMidiFw62[i].data, g_HexMidiFw62[i].length, ANCHOR_LOAD_INTERNAL);
if (err < 0) {
- err("%s - error loading firmware: error = %d\n", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d\n", __func__, err);
goto wraperr;
}
}
/* De-assert reset (let the CPU run) */
err = emi62_set_reset(dev,0);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
msleep(250); /* let device settle */
struct usb_device *dev = interface_to_usbdev(intf);
dev_dbg(&intf->dev, "emi62_probe\n");
- info("%s start", __FUNCTION__);
+ info("%s start", __func__);
emi62_load_firmware(dev);
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
dev_err(&dev->interface->dev, "%s - usb_submit_urb failed with result %d\n",
- __FUNCTION__, retval);
+ __func__, retval);
}
default:
/* what do we have here ? An unsupported Product-ID ? */
dev_err(&dev->interface->dev, "%s - not supported for product=0x%x\n",
- __FUNCTION__, dev->product_id);
+ __func__, dev->product_id);
retval = -EFAULT;
goto exit;
break;
interface = usb_find_interface(&iowarrior_driver, subminor);
if (!interface) {
- err("%s - error, can't find device for minor %d", __FUNCTION__,
+ err("%s - error, can't find device for minor %d", __func__,
subminor);
return -ENODEV;
}
goto exit;
} else {
dbg_info(&dev->intf->dev, "%s: nonzero status received: %d\n",
- __FUNCTION__, status);
+ __func__, status);
spin_lock(&dev->rbsl);
goto resubmit; /* maybe we can recover */
}
memcpy(actual_buffer+1, dev->interrupt_in_buffer, urb->actual_length);
dev->ring_head = next_ring_head;
dbg_info(&dev->intf->dev, "%s: received %d bytes\n",
- __FUNCTION__, urb->actual_length);
+ __func__, urb->actual_length);
} else {
dev_warn(&dev->intf->dev,
"Ring buffer overflow, %d bytes dropped\n",
status == -ESHUTDOWN))
dbg_info(&dev->intf->dev,
"%s - nonzero write interrupt status received: %d\n",
- __FUNCTION__, status);
+ __func__, status);
dev->interrupt_out_busy = 0;
wake_up_interruptible(&dev->write_wait);
if (!interface) {
err("%s - error, can't find device for minor %d\n",
- __FUNCTION__, subminor);
+ __func__, subminor);
return -ENODEV;
}
bytes_to_write = min(count, write_buffer_size*dev->interrupt_out_endpoint_size);
if (bytes_to_write < count)
dev_warn(&dev->intf->dev, "Write buffer overflow, %zd bytes dropped\n",count-bytes_to_write);
- dbg_info(&dev->intf->dev, "%s: count = %zd, bytes_to_write = %zd\n", __FUNCTION__, count, bytes_to_write);
+ dbg_info(&dev->intf->dev, "%s: count = %zd, bytes_to_write = %zd\n", __func__, count, bytes_to_write);
if (copy_from_user(dev->interrupt_out_buffer, buffer, bytes_to_write)) {
retval = -EFAULT;
* - imported into lejos project
* - changed wake_up to wake_up_interruptible
* - changed to use lego0 rather than tower0
- * - changed dbg() to use __func__ rather than deprecated __FUNCTION__
+ * - changed dbg() to use __func__ rather than deprecated __func__
* 2003-01-12 - 0.53 david (david@csse.uwa.edu.au)
* - changed read and write to write everything or
* timeout (from a patch by Chris Riesen and Brett Thaeler driver)
* - added poll
* - forbid seeking
* - added nonblocking I/O
- * - changed back __func__ to __FUNCTION__
+ * - changed back __func__ to __func__
* - read and log tower firmware version
* - reset tower on probe, avoids failure of first write
* 2004-03-09 - 0.7 Juergen Stuber <starblue@users.sourceforge.net>
*/
static inline void tower_delete (struct lego_usb_tower *dev)
{
- dbg(2, "%s: enter", __FUNCTION__);
+ dbg(2, "%s: enter", __func__);
tower_abort_transfers (dev);
kfree (dev->interrupt_out_buffer);
kfree (dev);
- dbg(2, "%s: leave", __FUNCTION__);
+ dbg(2, "%s: leave", __func__);
}
struct tower_reset_reply reset_reply;
int result;
- dbg(2, "%s: enter", __FUNCTION__);
+ dbg(2, "%s: enter", __func__);
nonseekable_open(inode, file);
subminor = iminor(inode);
if (!interface) {
err ("%s - error, can't find device for minor %d",
- __FUNCTION__, subminor);
+ __func__, subminor);
retval = -ENODEV;
goto exit;
}
mutex_unlock(&dev->lock);
exit:
- dbg(2, "%s: leave, return value %d ", __FUNCTION__, retval);
+ dbg(2, "%s: leave, return value %d ", __func__, retval);
return retval;
}
struct lego_usb_tower *dev;
int retval = 0;
- dbg(2, "%s: enter", __FUNCTION__);
+ dbg(2, "%s: enter", __func__);
dev = (struct lego_usb_tower *)file->private_data;
if (dev == NULL) {
- dbg(1, "%s: object is NULL", __FUNCTION__);
+ dbg(1, "%s: object is NULL", __func__);
retval = -ENODEV;
goto exit_nolock;
}
}
if (dev->open_count != 1) {
- dbg(1, "%s: device not opened exactly once", __FUNCTION__);
+ dbg(1, "%s: device not opened exactly once", __func__);
retval = -ENODEV;
goto unlock_exit;
}
exit:
mutex_unlock(&open_disc_mutex);
exit_nolock:
- dbg(2, "%s: leave, return value %d", __FUNCTION__, retval);
+ dbg(2, "%s: leave, return value %d", __func__, retval);
return retval;
}
*/
static void tower_abort_transfers (struct lego_usb_tower *dev)
{
- dbg(2, "%s: enter", __FUNCTION__);
+ dbg(2, "%s: enter", __func__);
if (dev == NULL) {
- dbg(1, "%s: dev is null", __FUNCTION__);
+ dbg(1, "%s: dev is null", __func__);
goto exit;
}
usb_kill_urb(dev->interrupt_out_urb);
exit:
- dbg(2, "%s: leave", __FUNCTION__);
+ dbg(2, "%s: leave", __func__);
}
struct lego_usb_tower *dev;
unsigned int mask = 0;
- dbg(2, "%s: enter", __FUNCTION__);
+ dbg(2, "%s: enter", __func__);
dev = file->private_data;
mask |= POLLOUT | POLLWRNORM;
}
- dbg(2, "%s: leave, mask = %d", __FUNCTION__, mask);
+ dbg(2, "%s: leave, mask = %d", __func__, mask);
return mask;
}
int retval = 0;
unsigned long timeout = 0;
- dbg(2, "%s: enter, count = %Zd", __FUNCTION__, count);
+ dbg(2, "%s: enter, count = %Zd", __func__, count);
dev = (struct lego_usb_tower *)file->private_data;
/* verify that we actually have some data to read */
if (count == 0) {
- dbg(1, "%s: read request of 0 bytes", __FUNCTION__);
+ dbg(1, "%s: read request of 0 bytes", __func__);
goto unlock_exit;
}
mutex_unlock(&dev->lock);
exit:
- dbg(2, "%s: leave, return value %d", __FUNCTION__, retval);
+ dbg(2, "%s: leave, return value %d", __func__, retval);
return retval;
}
size_t bytes_to_write;
int retval = 0;
- dbg(2, "%s: enter, count = %Zd", __FUNCTION__, count);
+ dbg(2, "%s: enter, count = %Zd", __func__, count);
dev = (struct lego_usb_tower *)file->private_data;
/* verify that we actually have some data to write */
if (count == 0) {
- dbg(1, "%s: write request of 0 bytes", __FUNCTION__);
+ dbg(1, "%s: write request of 0 bytes", __func__);
goto unlock_exit;
}
/* write the data into interrupt_out_buffer from userspace */
bytes_to_write = min_t(int, count, write_buffer_size);
- dbg(4, "%s: count = %Zd, bytes_to_write = %Zd", __FUNCTION__, count, bytes_to_write);
+ dbg(4, "%s: count = %Zd, bytes_to_write = %Zd", __func__, count, bytes_to_write);
if (copy_from_user (dev->interrupt_out_buffer, buffer, bytes_to_write)) {
retval = -EFAULT;
mutex_unlock(&dev->lock);
exit:
- dbg(2, "%s: leave, return value %d", __FUNCTION__, retval);
+ dbg(2, "%s: leave, return value %d", __func__, retval);
return retval;
}
int status = urb->status;
int retval;
- dbg(4, "%s: enter, status %d", __FUNCTION__, status);
+ dbg(4, "%s: enter, status %d", __func__, status);
- lego_usb_tower_debug_data(5, __FUNCTION__, urb->actual_length, urb->transfer_buffer);
+ lego_usb_tower_debug_data(5, __func__, urb->actual_length, urb->transfer_buffer);
if (status) {
if (status == -ENOENT ||
status == -ESHUTDOWN) {
goto exit;
} else {
- dbg(1, "%s: nonzero status received: %d", __FUNCTION__, status);
+ dbg(1, "%s: nonzero status received: %d", __func__, status);
goto resubmit; /* maybe we can recover */
}
}
urb->actual_length);
dev->read_buffer_length += urb->actual_length;
dev->read_last_arrival = jiffies;
- dbg(3, "%s: received %d bytes", __FUNCTION__, urb->actual_length);
+ dbg(3, "%s: received %d bytes", __func__, urb->actual_length);
} else {
- printk(KERN_WARNING "%s: read_buffer overflow, %d bytes dropped", __FUNCTION__, urb->actual_length);
+ printk(KERN_WARNING "%s: read_buffer overflow, %d bytes dropped", __func__, urb->actual_length);
}
spin_unlock (&dev->read_buffer_lock);
}
if (dev->interrupt_in_running && dev->udev) {
retval = usb_submit_urb (dev->interrupt_in_urb, GFP_ATOMIC);
if (retval) {
- err("%s: usb_submit_urb failed (%d)", __FUNCTION__, retval);
+ err("%s: usb_submit_urb failed (%d)", __func__, retval);
}
}
dev->interrupt_in_done = 1;
wake_up_interruptible (&dev->read_wait);
- lego_usb_tower_debug_data(5, __FUNCTION__, urb->actual_length, urb->transfer_buffer);
- dbg(4, "%s: leave, status %d", __FUNCTION__, status);
+ lego_usb_tower_debug_data(5, __func__, urb->actual_length, urb->transfer_buffer);
+ dbg(4, "%s: leave, status %d", __func__, status);
}
struct lego_usb_tower *dev = (struct lego_usb_tower *)urb->context;
int status = urb->status;
- dbg(4, "%s: enter, status %d", __FUNCTION__, status);
- lego_usb_tower_debug_data(5, __FUNCTION__, urb->actual_length, urb->transfer_buffer);
+ dbg(4, "%s: enter, status %d", __func__, status);
+ lego_usb_tower_debug_data(5, __func__, urb->actual_length, urb->transfer_buffer);
/* sync/async unlink faults aren't errors */
if (status && !(status == -ENOENT ||
status == -ECONNRESET ||
status == -ESHUTDOWN)) {
dbg(1, "%s - nonzero write bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
}
dev->interrupt_out_busy = 0;
wake_up_interruptible(&dev->write_wait);
- lego_usb_tower_debug_data(5, __FUNCTION__, urb->actual_length, urb->transfer_buffer);
- dbg(4, "%s: leave, status %d", __FUNCTION__, status);
+ lego_usb_tower_debug_data(5, __func__, urb->actual_length, urb->transfer_buffer);
+ dbg(4, "%s: leave, status %d", __func__, status);
}
int retval = -ENOMEM;
int result;
- dbg(2, "%s: enter", __FUNCTION__);
+ dbg(2, "%s: enter", __func__);
if (udev == NULL) {
info ("udev is NULL.");
exit:
- dbg(2, "%s: leave, return value 0x%.8lx (dev)", __FUNCTION__, (long) dev);
+ dbg(2, "%s: leave, return value 0x%.8lx (dev)", __func__, (long) dev);
return retval;
struct lego_usb_tower *dev;
int minor;
- dbg(2, "%s: enter", __FUNCTION__);
+ dbg(2, "%s: enter", __func__);
dev = usb_get_intfdata (interface);
mutex_lock(&open_disc_mutex);
info("LEGO USB Tower #%d now disconnected", (minor - LEGO_USB_TOWER_MINOR_BASE));
- dbg(2, "%s: leave", __FUNCTION__);
+ dbg(2, "%s: leave", __func__);
}
int result;
int retval = 0;
- dbg(2, "%s: enter", __FUNCTION__);
+ dbg(2, "%s: enter", __func__);
/* register this driver with the USB subsystem */
result = usb_register(&tower_driver);
info(DRIVER_DESC " " DRIVER_VERSION);
exit:
- dbg(2, "%s: leave, return value %d", __FUNCTION__, retval);
+ dbg(2, "%s: leave, return value %d", __func__, retval);
return retval;
}
*/
static void __exit lego_usb_tower_exit(void)
{
- dbg(2, "%s: enter", __FUNCTION__);
+ dbg(2, "%s: enter", __func__);
/* deregister this driver with the USB subsystem */
usb_deregister (&tower_driver);
- dbg(2, "%s: leave", __FUNCTION__);
+ dbg(2, "%s: leave", __func__);
}
module_init (lego_usb_tower_init);
buffer = kzalloc(4, GFP_KERNEL);
if (!buffer) {
- dev_err(&kit->udev->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err(&kit->udev->dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
buffer[0] = (u8)kit->outputs;
buffer = kmalloc(8, GFP_KERNEL);
form_buffer = kmalloc(30, GFP_KERNEL);
if ((!buffer) || (!form_buffer)) {
- dev_err(&kit->udev->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err(&kit->udev->dev, "%s - out of memory\n", __func__);
goto exit;
}
buffer = kzalloc(8, GFP_KERNEL);
if (!buffer) {
- dev_err(&kit->udev->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err(&kit->udev->dev, "%s - out of memory\n", __func__);
goto exit;
}
buffer = kzalloc(8, GFP_KERNEL);
if (!buffer) {
- dev_err(&mc->intf->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err(&mc->intf->dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
buffer = kmalloc(6, GFP_KERNEL);
if (!buffer) {
dev_err(&servo->udev->dev, "%s - out of memory\n",
- __FUNCTION__);
+ __func__);
return -ENOMEM;
}
buffer = kmalloc(2, GFP_KERNEL);
if (!buffer) {
dev_err(&servo->udev->dev, "%s - out of memory\n",
- __FUNCTION__);
+ __func__);
return -ENOMEM;
}
dev = kzalloc(sizeof (struct phidget_servo), GFP_KERNEL);
if (dev == NULL) {
- dev_err(&interface->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err(&interface->dev, "%s - out of memory\n", __func__);
rc = -ENOMEM;
goto out;
}
interface = usb_find_interface(&lcd_driver, subminor);
if (!interface) {
err ("USBLCD: %s - error, can't find device for minor %d",
- __FUNCTION__, subminor);
+ __func__, subminor);
return -ENODEV;
}
status == -ECONNRESET ||
status == -ESHUTDOWN)) {
dbg("USBLCD: %s - nonzero write bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
}
/* free up our allocated buffer */
/* send the data out the bulk port */
retval = usb_submit_urb(urb, GFP_KERNEL);
if (retval) {
- err("USBLCD: %s - failed submitting write urb, error %d", __FUNCTION__, retval);
+ err("USBLCD: %s - failed submitting write urb, error %d", __func__, retval);
goto error_unanchor;
}
dbg ("ep %02x bogus status: %04x != 0", ep, status);
return -EINVAL;
}
- retval = simple_io (urb, 1, 0, 0, __FUNCTION__);
+ retval = simple_io (urb, 1, 0, 0, __func__);
if (retval != 0)
return -EINVAL;
return 0;
dbg ("ep %02x bogus status: %04x != 1", ep, status);
return -EINVAL;
}
- retval = simple_io (urb, 1, 0, -EPIPE, __FUNCTION__);
+ retval = simple_io (urb, 1, 0, -EPIPE, __func__);
if (retval != -EPIPE)
return -EINVAL;
retval = simple_io (urb, 1, 0, -EPIPE, "verify_still_halted");
struct aircable_private *priv = usb_get_serial_port_data(port);
unsigned char* buf;
u16 *dbuf;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (port->write_urb_busy)
return;
buf = kzalloc(count + HCI_HEADER_LENGTH, GFP_ATOMIC);
if (!buf) {
- err("%s- kzalloc(%d) failed.", __FUNCTION__,
+ err("%s- kzalloc(%d) failed.", __func__,
count + HCI_HEADER_LENGTH);
return;
}
kfree(buf);
port->write_urb_busy = 1;
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
+ usb_serial_debug_data(debug, &port->dev, __func__,
count + HCI_HEADER_LENGTH,
port->write_urb->transfer_buffer);
port->write_urb->transfer_buffer_length = count + HCI_HEADER_LENGTH;
if (result) {
dev_err(&port->dev,
"%s - failed submitting write urb, error %d\n",
- __FUNCTION__, result);
+ __func__, result);
port->write_urb_busy = 0;
}
if (!tty) {
schedule_work(&priv->rx_work);
- err("%s - No tty available", __FUNCTION__);
+ err("%s - No tty available", __func__);
return ;
}
tty_prepare_flip_string(tty, &data, count);
if (!data){
- err("%s- kzalloc(%d) failed.", __FUNCTION__, count);
+ err("%s- kzalloc(%d) failed.", __func__, count);
return;
}
priv = kzalloc(sizeof(struct aircable_private), GFP_KERNEL);
if (!priv){
- err("%s- kmalloc(%Zd) failed.", __FUNCTION__,
+ err("%s- kmalloc(%Zd) failed.", __func__,
sizeof(struct aircable_private));
return -ENOMEM;
}
struct usb_serial_port *port = serial->port[0];
struct aircable_private *priv = usb_get_serial_port_data(port);
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
if (priv) {
serial_buf_free(priv->tx_buf);
struct aircable_private *priv = usb_get_serial_port_data(port);
int temp;
- dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count);
+ dbg("%s - port %d, %d bytes", __func__, port->number, count);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, source);
+ usb_serial_debug_data(debug, &port->dev, __func__, count, source);
if (!count){
- dbg("%s - write request of 0 bytes", __FUNCTION__);
+ dbg("%s - write request of 0 bytes", __func__);
return count;
}
int status = urb->status;
int result;
- dbg("%s - urb status: %d", __FUNCTION__ , status);
+ dbg("%s - urb status: %d", __func__ , status);
/* This has been taken from cypress_m8.c cypress_write_int_callback */
switch (status) {
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, status);
+ __func__, status);
port->write_urb_busy = 0;
return;
default:
/* error in the urb, so we have to resubmit it */
- dbg("%s - Overflow in write", __FUNCTION__);
+ dbg("%s - Overflow in write", __func__);
dbg("%s - nonzero write bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
port->write_urb->transfer_buffer_length = 1;
port->write_urb->dev = port->serial->dev;
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result)
dev_err(&urb->dev->dev,
"%s - failed resubmitting write urb, error %d\n",
- __FUNCTION__, result);
+ __func__, result);
else
return;
}
unsigned char *temp;
int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (status) {
- dbg("%s - urb status = %d", __FUNCTION__, status);
+ dbg("%s - urb status = %d", __func__, status);
if (!port->open_count) {
- dbg("%s - port is closed, exiting.", __FUNCTION__);
+ dbg("%s - port is closed, exiting.", __func__);
return;
}
if (status == -EPROTO) {
dbg("%s - caught -EPROTO, resubmitting the urb",
- __FUNCTION__);
+ __func__);
usb_fill_bulk_urb(port->read_urb, port->serial->dev,
usb_rcvbulkpipe(port->serial->dev,
port->bulk_in_endpointAddress),
if (result)
dev_err(&urb->dev->dev,
"%s - failed resubmitting read urb, error %d\n",
- __FUNCTION__, result);
+ __func__, result);
return;
}
- dbg("%s - unable to handle the error, exiting.", __FUNCTION__);
+ dbg("%s - unable to handle the error, exiting.", __func__);
return;
}
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
+ usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length,urb->transfer_buffer);
tty = port->tty;
if (result)
dev_err(&urb->dev->dev,
"%s - failed resubmitting read urb, error %d\n",
- __FUNCTION__, result);
+ __func__, result);
}
return;
struct aircable_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->rx_lock, flags);
priv->rx_flags |= THROTTLED;
int actually_throttled;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->rx_lock, flags);
actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
struct usb_serial *serial = port->serial;
struct airprime_private *priv;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
if (port->number != 0)
return 0;
int result;
int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (status) {
dbg("%s - nonzero read bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
}
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+ usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
tty = port->tty;
if (tty && urb->actual_length) {
result = usb_submit_urb (urb, GFP_ATOMIC);
if (result)
dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n",
- __FUNCTION__, result);
+ __func__, result);
return;
}
int status = urb->status;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* free up the transfer buffer, as usb_free_urb() does not do this */
kfree (urb->transfer_buffer);
if (status)
dbg("%s - nonzero write bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
spin_lock_irqsave(&priv->lock, flags);
--priv->outstanding_urbs;
spin_unlock_irqrestore(&priv->lock, flags);
int i;
int result = 0;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* initialize our private data structure if it isn't already created */
if (!priv) {
buffer = kmalloc(buffer_size, GFP_KERNEL);
if (!buffer) {
dev_err(&port->dev, "%s - out of memory.\n",
- __FUNCTION__);
+ __func__);
result = -ENOMEM;
goto errout;
}
if (!urb) {
kfree(buffer);
dev_err(&port->dev, "%s - no more urbs?\n",
- __FUNCTION__);
+ __func__);
result = -ENOMEM;
goto errout;
}
kfree(buffer);
dev_err(&port->dev,
"%s - failed submitting read urb %d for port %d, error %d\n",
- __FUNCTION__, i, port->number, result);
+ __func__, i, port->number, result);
goto errout;
}
/* remember this urb so we can kill it when the port is closed */
struct airprime_private *priv = usb_get_serial_port_data(port);
int i;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
priv->rts_state = 0;
priv->dtr_state = 0;
unsigned char *buffer;
unsigned long flags;
int status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
if (priv->outstanding_urbs > NUM_WRITE_URBS) {
spin_unlock_irqrestore(&priv->lock, flags);
- dbg("%s - write limit hit\n", __FUNCTION__);
+ dbg("%s - write limit hit\n", __func__);
return 0;
}
spin_unlock_irqrestore(&priv->lock, flags);
}
memcpy (buffer, buf, count);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, buffer);
+ usb_serial_debug_data(debug, &port->dev, __func__, count, buffer);
usb_fill_bulk_urb(urb, serial->dev,
usb_sndbulkpipe(serial->dev,
if (status) {
dev_err(&port->dev,
"%s - usb_submit_urb(write bulk) failed with status = %d\n",
- __FUNCTION__, status);
+ __func__, status);
count = status;
kfree (buffer);
} else {
static void __exit airprime_exit(void)
{
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
usb_deregister(&airprime_driver);
usb_serial_deregister(&airprime_device);
config = 0;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
if (!priv->termios_initialized) {
char *buf;
int result = 0;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
buf = kmalloc(1, GFP_KERNEL);
if (!buf) {
return -EFAULT;
return 0;
default:
- dbg("%s cmd 0x%04x not supported", __FUNCTION__, cmd);
+ dbg("%s cmd 0x%04x not supported", __func__, cmd);
break;
}
struct belkin_sa_private *priv;
int i;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
/* stop reads and writes on all ports */
for (i=0; i < serial->num_ports; ++i) {
{
int retval = 0;
- dbg("%s port %d", __FUNCTION__, port->number);
+ dbg("%s port %d", __func__, port->number);
/*Start reading from the device*/
/* TODO: Look at possibility of submitting multiple URBs to device to
static void belkin_sa_close (struct usb_serial_port *port, struct file *filp)
{
- dbg("%s port %d", __FUNCTION__, port->number);
+ dbg("%s port %d", __func__, port->number);
/* shutdown our bulk reads and writes */
usb_kill_urb(port->write_urb);
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
default:
dbg("%s - nonzero urb status received: %d",
- __FUNCTION__, status);
+ __func__, status);
goto exit;
}
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+ usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
/* Handle known interrupt data */
/* ignore data[0] and data[1] */
retval = usb_submit_urb (urb, GFP_ATOMIC);
if (retval)
err ("%s - usb_submit_urb failed with result %d",
- __FUNCTION__, retval);
+ __func__, retval);
}
static void belkin_sa_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
unsigned long control_state;
unsigned long flags;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
spin_lock_irqsave(&priv->lock, flags);
control_state = priv->control_state;
int rts = 0;
int dtr = 0;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
spin_lock_irqsave(&priv->lock, flags);
control_state = priv->control_state;
struct tty_struct *tty = NULL;
struct ktermios *termios = NULL, dummy;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
if (options) {
baud = simple_strtoul(options, NULL, 10);
if (count == 0)
return;
- dbg("%s - port %d, %d byte(s)", __FUNCTION__, port->number, count);
+ dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
if (!port->open_count) {
- dbg ("%s - port not opened", __FUNCTION__);
+ dbg ("%s - port not opened", __func__);
return;
}
retval = serial->type->write(port, buf, i);
else
retval = usb_serial_generic_write(port, buf, i);
- dbg("%s - return value : %d", __FUNCTION__, retval);
+ dbg("%s - return value : %d", __func__, retval);
if (lf) {
/* append CR after LF */
unsigned char cr = 13;
retval = serial->type->write(port, &cr, 1);
else
retval = usb_serial_generic_write(port, &cr, 1);
- dbg("%s - return value : %d", __FUNCTION__, retval);
+ dbg("%s - return value : %d", __func__, retval);
}
buf += i;
count -= i;
buf = kcalloc(length, sizeof(__le32), GFP_KERNEL);
if (!buf) {
- dev_err(&port->dev, "%s - out of memory.\n", __FUNCTION__);
+ dev_err(&port->dev, "%s - out of memory.\n", __func__);
return -ENOMEM;
}
if (result != size) {
dev_err(&port->dev, "%s - Unable to send config request, "
"request=0x%x size=%d result=%d\n",
- __FUNCTION__, request, size, result);
+ __func__, request, size, result);
return -EPROTO;
}
buf = kmalloc(length * sizeof(__le32), GFP_KERNEL);
if (!buf) {
dev_err(&port->dev, "%s - out of memory.\n",
- __FUNCTION__);
+ __func__);
return -ENOMEM;
}
if ((size > 2 && result != size) || result < 0) {
dev_err(&port->dev, "%s - Unable to send request, "
"request=0x%x size=%d result=%d\n",
- __FUNCTION__, request, size, result);
+ __func__, request, size, result);
return -EPROTO;
}
struct usb_serial *serial = port->serial;
int result;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (cp2101_set_config_single(port, CP2101_UART, UART_ENABLE)) {
dev_err(&port->dev, "%s - Unable to enable UART\n",
- __FUNCTION__);
+ __func__);
return -EPROTO;
}
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result) {
dev_err(&port->dev, "%s - failed resubmitting read urb, "
- "error %d\n", __FUNCTION__, result);
+ "error %d\n", __func__, result);
return result;
}
{
struct usb_serial *serial = port->serial;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (serial->dev) {
/* shutdown any bulk reads that might be going on */
static void cp2101_close (struct usb_serial_port *port, struct file * filp)
{
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* shutdown our urbs */
- dbg("%s - shutting down urbs", __FUNCTION__);
+ dbg("%s - shutting down urbs", __func__);
usb_kill_urb(port->write_urb);
usb_kill_urb(port->read_urb);
int baud;
int bits;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (!port->tty || !port->tty->termios) {
- dbg("%s - no tty structures", __FUNCTION__);
+ dbg("%s - no tty structures", __func__);
return;
}
if (baud)
baud = BAUD_RATE_GEN_FREQ / baud;
- dbg("%s - baud rate = %d", __FUNCTION__, baud);
+ dbg("%s - baud rate = %d", __func__, baud);
tty_encode_baud_rate(port->tty, baud, baud);
cflag = port->tty->termios->c_cflag;
cflag &= ~CSIZE;
switch(bits & BITS_DATA_MASK) {
case BITS_DATA_5:
- dbg("%s - data bits = 5", __FUNCTION__);
+ dbg("%s - data bits = 5", __func__);
cflag |= CS5;
break;
case BITS_DATA_6:
- dbg("%s - data bits = 6", __FUNCTION__);
+ dbg("%s - data bits = 6", __func__);
cflag |= CS6;
break;
case BITS_DATA_7:
- dbg("%s - data bits = 7", __FUNCTION__);
+ dbg("%s - data bits = 7", __func__);
cflag |= CS7;
break;
case BITS_DATA_8:
- dbg("%s - data bits = 8", __FUNCTION__);
+ dbg("%s - data bits = 8", __func__);
cflag |= CS8;
break;
case BITS_DATA_9:
dbg("%s - data bits = 9 (not supported, "
- "using 8 data bits)", __FUNCTION__);
+ "using 8 data bits)", __func__);
cflag |= CS8;
bits &= ~BITS_DATA_MASK;
bits |= BITS_DATA_8;
break;
default:
dbg("%s - Unknown number of data bits, "
- "using 8", __FUNCTION__);
+ "using 8", __func__);
cflag |= CS8;
bits &= ~BITS_DATA_MASK;
bits |= BITS_DATA_8;
switch(bits & BITS_PARITY_MASK) {
case BITS_PARITY_NONE:
- dbg("%s - parity = NONE", __FUNCTION__);
+ dbg("%s - parity = NONE", __func__);
cflag &= ~PARENB;
break;
case BITS_PARITY_ODD:
- dbg("%s - parity = ODD", __FUNCTION__);
+ dbg("%s - parity = ODD", __func__);
cflag |= (PARENB|PARODD);
break;
case BITS_PARITY_EVEN:
- dbg("%s - parity = EVEN", __FUNCTION__);
+ dbg("%s - parity = EVEN", __func__);
cflag &= ~PARODD;
cflag |= PARENB;
break;
case BITS_PARITY_MARK:
dbg("%s - parity = MARK (not supported, "
- "disabling parity)", __FUNCTION__);
+ "disabling parity)", __func__);
cflag &= ~PARENB;
bits &= ~BITS_PARITY_MASK;
cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
case BITS_PARITY_SPACE:
dbg("%s - parity = SPACE (not supported, "
- "disabling parity)", __FUNCTION__);
+ "disabling parity)", __func__);
cflag &= ~PARENB;
bits &= ~BITS_PARITY_MASK;
cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
default:
dbg("%s - Unknown parity mode, "
- "disabling parity", __FUNCTION__);
+ "disabling parity", __func__);
cflag &= ~PARENB;
bits &= ~BITS_PARITY_MASK;
cp2101_set_config(port, CP2101_BITS, &bits, 2);
cflag &= ~CSTOPB;
switch(bits & BITS_STOP_MASK) {
case BITS_STOP_1:
- dbg("%s - stop bits = 1", __FUNCTION__);
+ dbg("%s - stop bits = 1", __func__);
break;
case BITS_STOP_1_5:
dbg("%s - stop bits = 1.5 (not supported, "
- "using 1 stop bit)", __FUNCTION__);
+ "using 1 stop bit)", __func__);
bits &= ~BITS_STOP_MASK;
cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
case BITS_STOP_2:
- dbg("%s - stop bits = 2", __FUNCTION__);
+ dbg("%s - stop bits = 2", __func__);
cflag |= CSTOPB;
break;
default:
dbg("%s - Unknown number of stop bits, "
- "using 1 stop bit", __FUNCTION__);
+ "using 1 stop bit", __func__);
bits &= ~BITS_STOP_MASK;
cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
if (modem_ctl[0] & 0x0008) {
- dbg("%s - flow control = CRTSCTS", __FUNCTION__);
+ dbg("%s - flow control = CRTSCTS", __func__);
cflag |= CRTSCTS;
} else {
- dbg("%s - flow control = NONE", __FUNCTION__);
+ dbg("%s - flow control = NONE", __func__);
cflag &= ~CRTSCTS;
}
int baud=0, bits;
unsigned int modem_ctl[4];
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (!port->tty || !port->tty->termios) {
- dbg("%s - no tty structures", __FUNCTION__);
+ dbg("%s - no tty structures", __func__);
return;
}
port->tty->termios->c_cflag &= ~CMSPAR;
}
if (baud) {
- dbg("%s - Setting baud rate to %d baud", __FUNCTION__,
+ dbg("%s - Setting baud rate to %d baud", __func__,
baud);
if (cp2101_set_config_single(port, CP2101_BAUDRATE,
(BAUD_RATE_GEN_FREQ / baud))) {
switch (cflag & CSIZE) {
case CS5:
bits |= BITS_DATA_5;
- dbg("%s - data bits = 5", __FUNCTION__);
+ dbg("%s - data bits = 5", __func__);
break;
case CS6:
bits |= BITS_DATA_6;
- dbg("%s - data bits = 6", __FUNCTION__);
+ dbg("%s - data bits = 6", __func__);
break;
case CS7:
bits |= BITS_DATA_7;
- dbg("%s - data bits = 7", __FUNCTION__);
+ dbg("%s - data bits = 7", __func__);
break;
case CS8:
bits |= BITS_DATA_8;
- dbg("%s - data bits = 8", __FUNCTION__);
+ dbg("%s - data bits = 8", __func__);
break;
/*case CS9:
bits |= BITS_DATA_9;
- dbg("%s - data bits = 9", __FUNCTION__);
+ dbg("%s - data bits = 9", __func__);
break;*/
default:
dev_err(&port->dev, "cp2101 driver does not "
if (cflag & PARENB) {
if (cflag & PARODD) {
bits |= BITS_PARITY_ODD;
- dbg("%s - parity = ODD", __FUNCTION__);
+ dbg("%s - parity = ODD", __func__);
} else {
bits |= BITS_PARITY_EVEN;
- dbg("%s - parity = EVEN", __FUNCTION__);
+ dbg("%s - parity = EVEN", __func__);
}
}
if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
bits &= ~BITS_STOP_MASK;
if (cflag & CSTOPB) {
bits |= BITS_STOP_2;
- dbg("%s - stop bits = 2", __FUNCTION__);
+ dbg("%s - stop bits = 2", __func__);
} else {
bits |= BITS_STOP_1;
- dbg("%s - stop bits = 1", __FUNCTION__);
+ dbg("%s - stop bits = 1", __func__);
}
if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
dev_err(&port->dev, "Number of stop bits requested "
if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
- __FUNCTION__, modem_ctl[0], modem_ctl[1],
+ __func__, modem_ctl[0], modem_ctl[1],
modem_ctl[2], modem_ctl[3]);
if (cflag & CRTSCTS) {
modem_ctl[0] &= ~0x7B;
modem_ctl[0] |= 0x09;
modem_ctl[1] = 0x80;
- dbg("%s - flow control = CRTSCTS", __FUNCTION__);
+ dbg("%s - flow control = CRTSCTS", __func__);
} else {
modem_ctl[0] &= ~0x7B;
modem_ctl[0] |= 0x01;
modem_ctl[1] |= 0x40;
- dbg("%s - flow control = NONE", __FUNCTION__);
+ dbg("%s - flow control = NONE", __func__);
}
dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
- __FUNCTION__, modem_ctl[0], modem_ctl[1],
+ __func__, modem_ctl[0], modem_ctl[1],
modem_ctl[2], modem_ctl[3]);
cp2101_set_config(port, CP2101_MODEMCTL, modem_ctl, 16);
}
{
int control = 0;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (set & TIOCM_RTS) {
control |= CONTROL_RTS;
control |= CONTROL_WRITE_DTR;
}
- dbg("%s - control = 0x%.4x", __FUNCTION__, control);
+ dbg("%s - control = 0x%.4x", __func__, control);
return cp2101_set_config(port, CP2101_CONTROL, &control, 2);
{
int control, result;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
cp2101_get_config(port, CP2101_CONTROL, &control, 1);
|((control & CONTROL_RING)? TIOCM_RI : 0)
|((control & CONTROL_DCD) ? TIOCM_CD : 0);
- dbg("%s - control = 0x%.2x", __FUNCTION__, control);
+ dbg("%s - control = 0x%.2x", __func__, control);
return result;
}
{
int state;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (break_state == 0)
state = BREAK_OFF;
else
state = BREAK_ON;
- dbg("%s - turning break %s", __FUNCTION__,
+ dbg("%s - turning break %s", __func__,
state==BREAK_OFF ? "off" : "on");
cp2101_set_config(port, CP2101_BREAK, &state, 2);
}
{
int i;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/* Stop reads and writes on all ports */
for (i=0; i < serial->num_ports; ++i) {
struct cyberjack_private *priv;
int i;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/* allocate the private data structure */
priv = kmalloc(sizeof(struct cyberjack_private), GFP_KERNEL);
GFP_KERNEL);
if (result)
err(" usb_submit_urb(read int) failed");
- dbg("%s - usb_submit_urb(int urb)", __FUNCTION__);
+ dbg("%s - usb_submit_urb(int urb)", __func__);
}
return( 0 );
{
int i;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
for (i=0; i < serial->num_ports; ++i) {
usb_kill_urb(serial->port[i]->interrupt_in_urb);
unsigned long flags;
int result = 0;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
- dbg("%s - usb_clear_halt", __FUNCTION__ );
+ dbg("%s - usb_clear_halt", __func__ );
usb_clear_halt(port->serial->dev, port->write_urb->pipe);
/* force low_latency on so that our tty_push actually forces
static void cyberjack_close (struct usb_serial_port *port, struct file *filp)
{
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (port->serial->dev) {
/* shutdown any bulk reads that might be going on */
int result;
int wrexpected;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (count == 0) {
- dbg("%s - write request of 0 bytes", __FUNCTION__);
+ dbg("%s - write request of 0 bytes", __func__);
return (0);
}
spin_lock_bh(&port->lock);
if (port->write_urb_busy) {
spin_unlock_bh(&port->lock);
- dbg("%s - already writing", __FUNCTION__);
+ dbg("%s - already writing", __func__);
return 0;
}
port->write_urb_busy = 1;
/* Copy data */
memcpy (priv->wrbuf+priv->wrfilled, buf, count);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count,
+ usb_serial_debug_data(debug, &port->dev, __func__, count,
priv->wrbuf+priv->wrfilled);
priv->wrfilled += count;
if( priv->wrfilled >= 3 ) {
wrexpected = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3;
- dbg("%s - expected data: %d", __FUNCTION__, wrexpected);
+ dbg("%s - expected data: %d", __func__, wrexpected);
} else {
wrexpected = sizeof(priv->wrbuf);
}
/* We have enough data to begin transmission */
int length;
- dbg("%s - transmitting data (frame 1)", __FUNCTION__);
+ dbg("%s - transmitting data (frame 1)", __func__);
length = (wrexpected > port->bulk_out_size) ? port->bulk_out_size : wrexpected;
memcpy (port->write_urb->transfer_buffer, priv->wrbuf, length );
/* send the data out the bulk port */
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
- err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
+ err("%s - failed submitting write urb, error %d", __func__, result);
/* Throw away data. No better idea what to do with it. */
priv->wrfilled=0;
priv->wrsent=0;
return 0;
}
- dbg("%s - priv->wrsent=%d", __FUNCTION__,priv->wrsent);
- dbg("%s - priv->wrfilled=%d", __FUNCTION__,priv->wrfilled);
+ dbg("%s - priv->wrsent=%d", __func__,priv->wrsent);
+ dbg("%s - priv->wrfilled=%d", __func__,priv->wrfilled);
if( priv->wrsent>=priv->wrfilled ) {
- dbg("%s - buffer cleaned", __FUNCTION__);
+ dbg("%s - buffer cleaned", __func__);
memset( priv->wrbuf, 0, sizeof(priv->wrbuf) );
priv->wrfilled=0;
priv->wrsent=0;
int status = urb->status;
int result;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* the urb might have been killed. */
if (status)
return;
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+ usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
/* React only to interrupts signaling a bulk_in transfer */
if( (urb->actual_length==4) && (data[0]==0x01) ) {
/* "+=" is probably more fault tollerant than "=" */
priv->rdtodo += size;
- dbg("%s - rdtodo: %d", __FUNCTION__, priv->rdtodo);
+ dbg("%s - rdtodo: %d", __func__, priv->rdtodo);
spin_unlock(&priv->lock);
port->read_urb->dev = port->serial->dev;
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if( result )
- err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
- dbg("%s - usb_submit_urb(read urb)", __FUNCTION__);
+ err("%s - failed resubmitting read urb, error %d", __func__, result);
+ dbg("%s - usb_submit_urb(read urb)", __func__);
}
}
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result)
err(" usb_submit_urb(read int) failed");
- dbg("%s - usb_submit_urb(int urb)", __FUNCTION__);
+ dbg("%s - usb_submit_urb(int urb)", __func__);
}
static void cyberjack_read_bulk_callback (struct urb *urb)
int result;
int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+ usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
if (status) {
dbg("%s - nonzero read bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
}
tty = port->tty;
if (!tty) {
- dbg("%s - ignoring since device not open\n", __FUNCTION__);
+ dbg("%s - ignoring since device not open\n", __func__);
return;
}
if (urb->actual_length) {
spin_unlock(&priv->lock);
- dbg("%s - rdtodo: %d", __FUNCTION__, todo);
+ dbg("%s - rdtodo: %d", __func__, todo);
/* Continue to read if we have still urbs to do. */
if( todo /* || (urb->actual_length==port->bulk_in_endpointAddress)*/ ) {
port->read_urb->dev = port->serial->dev;
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
- dbg("%s - usb_submit_urb(read urb)", __FUNCTION__);
+ err("%s - failed resubmitting read urb, error %d", __func__, result);
+ dbg("%s - usb_submit_urb(read urb)", __func__);
}
}
struct cyberjack_private *priv = usb_get_serial_port_data(port);
int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
port->write_urb_busy = 0;
if (status) {
dbg("%s - nonzero write bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
}
if( priv->wrfilled ) {
int length, blksize, result;
- dbg("%s - transmitting data (frame n)", __FUNCTION__);
+ dbg("%s - transmitting data (frame n)", __func__);
length = ((priv->wrfilled - priv->wrsent) > port->bulk_out_size) ?
port->bulk_out_size : (priv->wrfilled - priv->wrsent);
/* send the data out the bulk port */
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
- err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
+ err("%s - failed submitting write urb, error %d", __func__, result);
/* Throw away data. No better idea what to do with it. */
priv->wrfilled=0;
priv->wrsent=0;
goto exit;
}
- dbg("%s - priv->wrsent=%d", __FUNCTION__,priv->wrsent);
- dbg("%s - priv->wrfilled=%d", __FUNCTION__,priv->wrfilled);
+ dbg("%s - priv->wrsent=%d", __func__,priv->wrsent);
+ dbg("%s - priv->wrfilled=%d", __func__,priv->wrfilled);
blksize = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3;
if( (priv->wrsent>=priv->wrfilled) || (priv->wrsent>=blksize) ) {
- dbg("%s - buffer cleaned", __FUNCTION__);
+ dbg("%s - buffer cleaned", __func__);
memset( priv->wrbuf, 0, sizeof(priv->wrbuf) );
priv->wrfilled=0;
priv->wrsent=0;
__u8 feature_buffer[5];
unsigned long flags;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
priv = usb_get_serial_port_data(port);
new_baudrate = priv->baud_rate;
/* Change of speed ? */
else if (baud_rate != priv->baud_rate) {
- dbg("%s - baud rate is changing", __FUNCTION__);
+ dbg("%s - baud rate is changing", __func__);
retval = analyze_baud_rate(port, baud_rate);
if (retval >= 0) {
new_baudrate = retval;
__func__, new_baudrate);
}
}
- dbg("%s - baud rate is being sent as %d", __FUNCTION__, new_baudrate);
+ dbg("%s - baud rate is being sent as %d", __func__, new_baudrate);
memset(feature_buffer, 0, sizeof(feature_buffer));
/* fill the feature_buffer with new configuration */
/* 1 bit gap */
feature_buffer[4] |= (reset << 7); /* assign reset at end of byte, 1 bit space */
- dbg("%s - device is being sent this feature report:", __FUNCTION__);
- dbg("%s - %02X - %02X - %02X - %02X - %02X", __FUNCTION__, feature_buffer[0], feature_buffer[1],
+ dbg("%s - device is being sent this feature report:", __func__);
+ dbg("%s - %02X - %02X - %02X - %02X - %02X", __func__, feature_buffer[0], feature_buffer[1],
feature_buffer[2], feature_buffer[3], feature_buffer[4]);
do {
retval != -ENODEV);
if (retval != sizeof(feature_buffer)) {
- err("%s - failed sending serial line settings - %d", __FUNCTION__, retval);
+ err("%s - failed sending serial line settings - %d", __func__, retval);
cypress_set_dead(port);
} else {
spin_lock_irqsave(&priv->lock, flags);
to crash the hardware. */
return -ENOTTY;
}
- dbg("%s - retreiving serial line settings", __FUNCTION__);
+ dbg("%s - retreiving serial line settings", __func__);
/* set initial values in feature buffer */
memset(feature_buffer, 0, sizeof(feature_buffer));
retval != -ENODEV);
if (retval != sizeof(feature_buffer)) {
- err("%s - failed to retrieve serial line settings - %d", __FUNCTION__, retval);
+ err("%s - failed to retrieve serial line settings - %d", __func__, retval);
cypress_set_dead(port);
return retval;
} else {
struct cypress_private *priv;
struct usb_serial_port *port = serial->port[0];
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
priv = kzalloc(sizeof (struct cypress_private), GFP_KERNEL);
if (!priv)
priv->write_urb_interval = interval;
priv->read_urb_interval = interval;
dbg("%s - port %d read & write intervals forced to %d",
- __FUNCTION__,port->number,interval);
+ __func__,port->number,interval);
} else {
priv->write_urb_interval = port->interrupt_out_urb->interval;
priv->read_urb_interval = port->interrupt_in_urb->interval;
dbg("%s - port %d intervals: read=%d write=%d",
- __FUNCTION__,port->number,
+ __func__,port->number,
priv->read_urb_interval,priv->write_urb_interval);
}
usb_set_serial_port_data(port, priv);
struct cypress_private *priv;
struct usb_serial_port *port = serial->port[0];
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
if (generic_startup(serial)) {
- dbg("%s - Failed setting up port %d", __FUNCTION__,
+ dbg("%s - Failed setting up port %d", __func__,
port->number);
return 1;
}
{
struct cypress_private *priv;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
if (generic_startup(serial)) {
- dbg("%s - Failed setting up port %d", __FUNCTION__,
+ dbg("%s - Failed setting up port %d", __func__,
serial->port[0]->number);
return 1;
}
{
struct cypress_private *priv;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
if (generic_startup(serial)) {
- dbg("%s - Failed setting up port %d", __FUNCTION__,
+ dbg("%s - Failed setting up port %d", __func__,
serial->port[0]->number);
return 1;
}
{
struct cypress_private *priv;
- dbg ("%s - port %d", __FUNCTION__, serial->port[0]->number);
+ dbg ("%s - port %d", __func__, serial->port[0]->number);
/* all open ports are closed at this point */
unsigned long flags;
int result = 0;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (!priv->comm_is_ok)
return -EIO;
result = cypress_write(port, NULL, 0);
if (result) {
- dev_err(&port->dev, "%s - failed setting the control lines - error %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - failed setting the control lines - error %d\n", __func__, result);
return result;
} else
- dbg("%s - success setting the control lines", __FUNCTION__);
+ dbg("%s - success setting the control lines", __func__);
cypress_set_termios(port, &priv->tmp_termios);
/* setup the port and start reading from the device */
if(!port->interrupt_in_urb){
- err("%s - interrupt_in_urb is empty!", __FUNCTION__);
+ err("%s - interrupt_in_urb is empty!", __func__);
return(-1);
}
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result){
- dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result);
cypress_set_dead(port);
}
long timeout;
wait_queue_t wait;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* wait for data to drain from buffer */
spin_lock_irq(&priv->lock);
timeout = 2*HZ;
schedule_timeout_interruptible(timeout);
- dbg("%s - stopping urbs", __FUNCTION__);
+ dbg("%s - stopping urbs", __func__);
usb_kill_urb (port->interrupt_in_urb);
usb_kill_urb (port->interrupt_out_urb);
struct cypress_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count);
+ dbg("%s - port %d, %d bytes", __func__, port->number, count);
/* line control commands, which need to be executed immediately,
are not put into the buffer for obvious reasons.
if (!priv->comm_is_ok)
return;
- dbg("%s - port %d", __FUNCTION__, port->number);
- dbg("%s - interrupt out size is %d", __FUNCTION__, port->interrupt_out_size);
+ dbg("%s - port %d", __func__, port->number);
+ dbg("%s - interrupt out size is %d", __func__, port->interrupt_out_size);
spin_lock_irqsave(&priv->lock, flags);
if (priv->write_urb_in_use) {
- dbg("%s - can't write, urb in use", __FUNCTION__);
+ dbg("%s - can't write, urb in use", __func__);
spin_unlock_irqrestore(&priv->lock, flags);
return;
}
if (priv->cmd_ctrl) {
priv->cmd_count++;
- dbg("%s - line control command being issued", __FUNCTION__);
+ dbg("%s - line control command being issued", __func__);
spin_unlock_irqrestore(&priv->lock, flags);
goto send;
} else
port->interrupt_out_buffer[0] |= count;
}
- dbg("%s - count is %d", __FUNCTION__, count);
+ dbg("%s - count is %d", __func__, count);
send:
spin_lock_irqsave(&priv->lock, flags);
actual_size = count +
(priv->pkt_fmt == packet_format_1 ? 2 : 1);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, port->interrupt_out_size,
+ usb_serial_debug_data(debug, &port->dev, __func__, port->interrupt_out_size,
port->interrupt_out_urb->transfer_buffer);
usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
cypress_write_int_callback, port, priv->write_urb_interval);
result = usb_submit_urb (port->interrupt_out_urb, GFP_ATOMIC);
if (result) {
- dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__,
+ dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __func__,
result);
priv->write_urb_in_use = 0;
cypress_set_dead(port);
int room = 0;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
room = cypress_buf_space_avail(priv->buf);
spin_unlock_irqrestore(&priv->lock, flags);
- dbg("%s - returns %d", __FUNCTION__, room);
+ dbg("%s - returns %d", __func__, room);
return room;
}
unsigned int result = 0;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
control = priv->line_control;
| ((status & UART_RI) ? TIOCM_RI : 0)
| ((status & UART_CD) ? TIOCM_CD : 0);
- dbg("%s - result = %x", __FUNCTION__, result);
+ dbg("%s - result = %x", __func__, result);
return result;
}
struct cypress_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
if (set & TIOCM_RTS)
{
struct cypress_private *priv = usb_get_serial_port_data(port);
- dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd);
+ dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
switch (cmd) {
/* This code comes from drivers/char/serial.c and ftdi_sio.c */
break;
}
- dbg("%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h", __FUNCTION__, cmd);
+ dbg("%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h", __func__, cmd);
return -ENOIOCTLCMD;
} /* cypress_ioctl */
__u8 oldlines;
int linechange = 0;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
tty = port->tty;
break;
default:
err("%s - CSIZE was set, but not CS5-CS8",
- __FUNCTION__);
+ __func__);
data_bits = 3;
}
} else
oldlines = priv->line_control;
if ((cflag & CBAUD) == B0) {
/* drop dtr and rts */
- dbg("%s - dropping the lines, baud rate 0bps", __FUNCTION__);
+ dbg("%s - dropping the lines, baud rate 0bps", __func__);
priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
} else
priv->line_control = (CONTROL_DTR | CONTROL_RTS);
spin_unlock_irqrestore(&priv->lock, flags);
dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, "
- "%d data_bits (+5)", __FUNCTION__, stop_bits,
+ "%d data_bits (+5)", __func__, stop_bits,
parity_enable, parity_type, data_bits);
cypress_serial_control(port, tty_get_baud_rate(tty), data_bits, stop_bits,
int chars = 0;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
chars = cypress_buf_data_avail(priv->buf);
spin_unlock_irqrestore(&priv->lock, flags);
- dbg("%s - returns %d", __FUNCTION__, chars);
+ dbg("%s - returns %d", __func__, chars);
return chars;
}
struct cypress_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
priv->rx_flags = THROTTLED;
int actually_throttled, result;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result) {
dev_err(&port->dev, "%s - failed submitting read urb, "
- "error %d\n", __FUNCTION__, result);
+ "error %d\n", __func__, result);
cypress_set_dead(port);
}
}
int i = 0;
int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
switch (status) {
case 0: /* success */
default:
/* something ugly is going on... */
dev_err(&urb->dev->dev,"%s - unexpected nonzero read status received: %d\n",
- __FUNCTION__, status);
+ __func__, status);
cypress_set_dead(port);
return;
}
spin_lock_irqsave(&priv->lock, flags);
if (priv->rx_flags & THROTTLED) {
- dbg("%s - now throttling", __FUNCTION__);
+ dbg("%s - now throttling", __func__);
priv->rx_flags |= ACTUALLY_THROTTLED;
spin_unlock_irqrestore(&priv->lock, flags);
return;
tty = port->tty;
if (!tty) {
- dbg("%s - bad tty pointer - exiting", __FUNCTION__);
+ dbg("%s - bad tty pointer - exiting", __func__);
return;
}
goto continue_read;
}
- usb_serial_debug_data (debug, &port->dev, __FUNCTION__,
+ usb_serial_debug_data (debug, &port->dev, __func__,
urb->actual_length, data);
spin_lock_irqsave(&priv->lock, flags);
* though */
if (tty && !(tty->termios->c_cflag & CLOCAL) &&
!(priv->current_status & UART_CD)) {
- dbg("%s - calling hangup", __FUNCTION__);
+ dbg("%s - calling hangup", __func__);
tty_hangup(tty);
goto continue_read;
}
if (priv->current_status & CYP_ERROR) {
spin_unlock_irqrestore(&priv->lock, flags);
tty_flag = TTY_PARITY;
- dbg("%s - Parity Error detected", __FUNCTION__);
+ dbg("%s - Parity Error detected", __func__);
} else
spin_unlock_irqrestore(&priv->lock, flags);
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result) {
dev_err(&urb->dev->dev, "%s - failed resubmitting "
- "read urb, error %d\n", __FUNCTION__,
+ "read urb, error %d\n", __func__,
result);
cypress_set_dead(port);
}
int result;
int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
switch (status) {
case 0:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, status);
+ __func__, status);
priv->write_urb_in_use = 0;
return;
case -EPIPE: /* no break needed; clear halt and resubmit */
usb_clear_halt(port->serial->dev, 0x02);
/* error in the urb, so we have to resubmit it */
dbg("%s - nonzero write bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
port->interrupt_out_urb->transfer_buffer_length = 1;
port->interrupt_out_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
if (!result)
return;
dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n",
- __FUNCTION__, result);
+ __func__, result);
cypress_set_dead(port);
break;
default:
dev_err(&urb->dev->dev,"%s - unexpected nonzero write status received: %d\n",
- __FUNCTION__, status);
+ __func__, status);
cypress_set_dead(port);
break;
}
{
int retval;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
retval = usb_serial_register(&cypress_earthmate_device);
if (retval)
static void __exit cypress_exit (void)
{
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
usb_deregister (&cypress_driver);
usb_serial_deregister (&cypress_earthmate_device);
}
spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
if (ret)
- err("%s: usb_submit_urb failed, ret=%d", __FUNCTION__, ret);
+ err("%s: usb_submit_urb failed, ret=%d", __func__, ret);
return ret;
}
if (ret)
err("%s: usb_submit_urb failed, ret=%d, port=%d",
- __FUNCTION__, ret, priv->dp_port_num);
+ __func__, ret, priv->dp_port_num);
return ret;
}
spin_unlock(&port_priv->dp_port_lock);
spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
if (ret)
- err("%s: usb_submit_urb failed, ret=%d", __FUNCTION__, ret);
+ err("%s: usb_submit_urb failed, ret=%d", __func__, ret);
return ret;
}
if (ret)
err("%s: usb_submit_urb failed, ret=%d, port=%d",
- __FUNCTION__, ret, priv->dp_port_num);
+ __func__, ret, priv->dp_port_num);
}
unsigned int val;
unsigned long flags;
- dbg("%s: TOP: port=%d", __FUNCTION__, priv->dp_port_num);
+ dbg("%s: TOP: port=%d", __func__, priv->dp_port_num);
spin_lock_irqsave(&priv->dp_port_lock, flags);
val = priv->dp_modem_signals;
unsigned int val;
unsigned long flags;
- dbg("%s: TOP: port=%d", __FUNCTION__, priv->dp_port_num);
+ dbg("%s: TOP: port=%d", __func__, priv->dp_port_num);
spin_lock_irqsave(&priv->dp_port_lock, flags);
val = (priv->dp_modem_signals & ~clear) | set;
spin_unlock_irqrestore(&priv->dp_port_lock, flags);
if (ret < 0)
err("%s: usb_submit_urb failed, ret=%d, port=%d",
- __FUNCTION__, ret, priv->dp_port_num);
+ __func__, ret, priv->dp_port_num);
dbg("digi_write: returning %d", ret);
return ret;
/* port and serial sanity check */
if (port == NULL || (priv=usb_get_serial_port_data(port)) == NULL) {
err("%s: port or port->private is NULL, status=%d",
- __FUNCTION__, status);
+ __func__, status);
return;
}
serial = port->serial;
if (serial == NULL || (serial_priv=usb_get_serial_data(serial)) == NULL) {
err("%s: serial or serial->private is NULL, status=%d",
- __FUNCTION__, status);
+ __func__, status);
return;
}
spin_unlock(&priv->dp_port_lock);
if (ret)
err("%s: usb_submit_urb failed, ret=%d, port=%d",
- __FUNCTION__, ret, priv->dp_port_num);
+ __func__, ret, priv->dp_port_num);
}
static int digi_write_room(struct usb_serial_port *port)
port->write_urb->dev = port->serial->dev;
if ((ret = usb_submit_urb(port->read_urb, GFP_KERNEL)) != 0) {
err("%s: usb_submit_urb failed, ret=%d, port=%d",
- __FUNCTION__, ret, i);
+ __func__, ret, i);
break;
}
}
/* port sanity check, do not resubmit if port is not valid */
if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
err("%s: port or port->private is NULL, status=%d",
- __FUNCTION__, status);
+ __func__, status);
return;
}
if (port->serial == NULL ||
(serial_priv=usb_get_serial_data(port->serial)) == NULL) {
err("%s: serial is bad or serial->private is NULL, status=%d",
- __FUNCTION__, status);
+ __func__, status);
return;
}
/* do not resubmit urb if it has any status error */
if (status) {
err("%s: nonzero read bulk status: status=%d, port=%d",
- __FUNCTION__, status, priv->dp_port_num);
+ __func__, status, priv->dp_port_num);
return;
}
urb->dev = port->serial->dev;
if ((ret = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
err("%s: failed resubmitting urb, ret=%d, port=%d",
- __FUNCTION__, ret, priv->dp_port_num);
+ __func__, ret, priv->dp_port_num);
}
}
if (urb->actual_length != len + 2) {
err("%s: INCOMPLETE OR MULTIPLE PACKET, urb->status=%d, "
"port=%d, opcode=%d, len=%d, actual_length=%d, "
- "status=%d", __FUNCTION__, status, priv->dp_port_num,
+ "status=%d", __func__, status, priv->dp_port_num,
opcode, len, urb->actual_length, port_status);
return -1;
}
spin_unlock(&priv->dp_port_lock);
if (opcode == DIGI_CMD_RECEIVE_DISABLE)
- dbg("%s: got RECEIVE_DISABLE", __FUNCTION__);
+ dbg("%s: got RECEIVE_DISABLE", __func__);
else if (opcode != DIGI_CMD_RECEIVE_DATA)
- dbg("%s: unknown opcode: %d", __FUNCTION__, opcode);
+ dbg("%s: unknown opcode: %d", __func__, opcode);
return(throttled ? 1 : 0);
struct usb_serial *serial = port->serial;
int result = 0;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* Force default termio settings */
empeg_set_termios (port, NULL) ;
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result)
- dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result);
return result;
}
static void empeg_close (struct usb_serial_port *port, struct file * filp)
{
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* shutdown our bulk read */
usb_kill_urb(port->read_urb);
int bytes_sent = 0;
int transfer_size;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
while (count > 0) {
spin_unlock_irqrestore (&write_urb_pool_lock, flags);
if (urb == NULL) {
- dbg("%s - no more free urbs", __FUNCTION__);
+ dbg("%s - no more free urbs", __func__);
goto exit;
}
if (urb->transfer_buffer == NULL) {
urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC);
if (urb->transfer_buffer == NULL) {
- dev_err(&port->dev, "%s no more kernel memory...\n", __FUNCTION__);
+ dev_err(&port->dev, "%s no more kernel memory...\n", __func__);
goto exit;
}
}
memcpy (urb->transfer_buffer, current_position, transfer_size);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, transfer_size, urb->transfer_buffer);
+ usb_serial_debug_data(debug, &port->dev, __func__, transfer_size, urb->transfer_buffer);
/* build up our urb */
usb_fill_bulk_urb (
/* send it down the pipe */
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
- dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed with status = %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed with status = %d\n", __func__, status);
bytes_sent = status;
break;
}
int i;
int room = 0;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave (&write_urb_pool_lock, flags);
spin_unlock_irqrestore (&write_urb_pool_lock, flags);
- dbg("%s - returns %d", __FUNCTION__, room);
+ dbg("%s - returns %d", __func__, room);
return (room);
int i;
int chars = 0;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave (&write_urb_pool_lock, flags);
spin_unlock_irqrestore (&write_urb_pool_lock, flags);
- dbg("%s - returns %d", __FUNCTION__, chars);
+ dbg("%s - returns %d", __func__, chars);
return (chars);
struct usb_serial_port *port = urb->context;
int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (status) {
dbg("%s - nonzero write bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
}
int result;
int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (status) {
dbg("%s - nonzero read bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
}
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+ usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
tty = port->tty;
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+ dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
return;
static void empeg_throttle (struct usb_serial_port *port)
{
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
usb_kill_urb(port->read_urb);
}
{
int result;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
port->read_urb->dev = port->serial->dev;
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result);
return;
}
{
int r;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
err("active config #%d != 1 ??",
serial->dev->actconfig->desc.bConfigurationValue);
return -ENODEV;
}
- dbg("%s - reset config", __FUNCTION__);
+ dbg("%s - reset config", __func__);
r = usb_reset_configuration (serial->dev);
/* continue on with initialization */
static void empeg_shutdown (struct usb_serial *serial)
{
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
}
static int empeg_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
{
- dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd);
+ dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
return -ENOIOCTLCMD;
}
static void empeg_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
{
struct ktermios *termios = port->tty->termios;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/*
* The empeg-car player wants these particular tty settings.
urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
if (!urb->transfer_buffer) {
err("%s - out of memory for urb buffers.",
- __FUNCTION__);
+ __func__);
continue;
}
}
/* dbg("ezusb_writememory %x, %d", address, length); */
if (!serial->dev) {
- err("%s - no physical device present, failing.", __FUNCTION__);
+ err("%s - no physical device present, failing.", __func__);
return -ENODEV;
}
transfer_buffer = kmemdup(data, length, GFP_KERNEL);
if (!transfer_buffer) {
- dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, length);
+ dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __func__, length);
return -ENOMEM;
}
result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), bRequest, 0x40, address, 0, transfer_buffer, length, 3000);
{
int response;
- /* dbg("%s - %d", __FUNCTION__, reset_bit); */
+ /* dbg("%s - %d", __func__, reset_bit); */
response = ezusb_writememory (serial, CPUCS_REG, &reset_bit, 1, 0xa0);
if (response < 0)
- dev_err(&serial->dev->dev, "%s- %d failed\n", __FUNCTION__, reset_bit);
+ dev_err(&serial->dev->dev, "%s- %d failed\n", __func__, reset_bit);
return response;
}
int rv;
if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
- dbg("%s - DTR|RTS not being set|cleared", __FUNCTION__);
+ dbg("%s - DTR|RTS not being set|cleared", __func__);
return 0; /* no change */
}
kfree(buf);
if (rv < 0) {
err("%s Error from MODEM_CTRL urb: DTR %s, RTS %s",
- __FUNCTION__,
+ __func__,
(set & TIOCM_DTR) ? "HIGH" :
(clear & TIOCM_DTR) ? "LOW" : "unchanged",
(set & TIOCM_RTS) ? "HIGH" :
(clear & TIOCM_RTS) ? "LOW" : "unchanged");
} else {
- dbg("%s - DTR %s, RTS %s", __FUNCTION__,
+ dbg("%s - DTR %s, RTS %s", __func__,
(set & TIOCM_DTR) ? "HIGH" :
(clear & TIOCM_DTR) ? "LOW" : "unchanged",
(set & TIOCM_RTS) ? "HIGH" :
/* 1. Get the baud rate from the tty settings, this observes alt_speed hack */
baud = tty_get_baud_rate(port->tty);
- dbg("%s - tty_get_baud_rate reports speed %d", __FUNCTION__, baud);
+ dbg("%s - tty_get_baud_rate reports speed %d", __func__, baud);
/* 2. Observe async-compatible custom_divisor hack, update baudrate if needed */
((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
(priv->custom_divisor)) {
baud = priv->baud_base / priv->custom_divisor;
- dbg("%s - custom divisor %d sets baud rate to %d", __FUNCTION__, priv->custom_divisor, baud);
+ dbg("%s - custom divisor %d sets baud rate to %d", __func__, priv->custom_divisor, baud);
}
/* 3. Convert baudrate to device-specific divisor */
case 115200: div_value = ftdi_sio_b115200; break;
} /* baud */
if (div_value == 0) {
- dbg("%s - Baudrate (%d) requested is not supported", __FUNCTION__, baud);
+ dbg("%s - Baudrate (%d) requested is not supported", __func__, baud);
div_value = ftdi_sio_b9600;
baud = 9600;
div_okay = 0;
if (baud <= 3000000) {
div_value = ftdi_232am_baud_to_divisor(baud);
} else {
- dbg("%s - Baud rate too high!", __FUNCTION__);
+ dbg("%s - Baud rate too high!", __func__);
baud = 9600;
div_value = ftdi_232am_baud_to_divisor(9600);
div_okay = 0;
if (baud <= 3000000) {
div_value = ftdi_232bm_baud_to_divisor(baud);
} else {
- dbg("%s - Baud rate too high!", __FUNCTION__);
+ dbg("%s - Baud rate too high!", __func__);
div_value = ftdi_232bm_baud_to_divisor(9600);
div_okay = 0;
baud = 9600;
if (div_okay) {
dbg("%s - Baud rate set to %d (divisor 0x%lX) on chip %s",
- __FUNCTION__, baud, (unsigned long)div_value,
+ __func__, baud, (unsigned long)div_value,
ftdi_chip_name[priv->chip_type]);
}
version = le16_to_cpu(udev->descriptor.bcdDevice);
interfaces = udev->actconfig->desc.bNumInterfaces;
- dbg("%s: bcdDevice = 0x%x, bNumInterfaces = %u", __FUNCTION__,
+ dbg("%s: bcdDevice = 0x%x, bNumInterfaces = %u", __func__,
version, interfaces);
if (interfaces > 1) {
int inter;
* to 0x200 when iSerialNumber is 0. */
if (version < 0x500) {
dbg("%s: something fishy - bcdDevice too low for multi-interface device",
- __FUNCTION__);
+ __func__);
}
} else if (version < 0x200) {
/* Old device. Assume its the original SIO. */
int rv = 0;
- dbg("%s",__FUNCTION__);
+ dbg("%s",__func__);
rv = usb_control_msg(udev,
usb_rcvctrlpipe(udev, 0),
int v = simple_strtoul(valbuf, NULL, 10);
int rv = 0;
- dbg("%s: setting latency timer = %i", __FUNCTION__, v);
+ dbg("%s: setting latency timer = %i", __func__, v);
rv = usb_control_msg(udev,
usb_sndctrlpipe(udev, 0),
int v = simple_strtoul(valbuf, NULL, 10);
int rv = 0;
- dbg("%s: setting event char = %i", __FUNCTION__, v);
+ dbg("%s: setting event char = %i", __func__, v);
rv = usb_control_msg(udev,
usb_sndctrlpipe(udev, 0),
struct ftdi_private *priv = usb_get_serial_port_data(port);
int retval = 0;
- dbg("%s",__FUNCTION__);
+ dbg("%s",__func__);
/* XXX I've no idea if the original SIO supports the event_char
* sysfs parameter, so I'm playing it safe. */
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
- dbg("%s",__FUNCTION__);
+ dbg("%s",__func__);
/* XXX see create_sysfs_attrs */
if (priv->chip_type != SIO) {
struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial);
- dbg("%s",__FUNCTION__);
+ dbg("%s",__func__);
priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
if (!priv){
- err("%s- kmalloc(%Zd) failed.", __FUNCTION__, sizeof(struct ftdi_private));
+ err("%s- kmalloc(%Zd) failed.", __func__, sizeof(struct ftdi_private));
return -ENOMEM;
}
/* Called from usbserial:serial_probe */
static void ftdi_USB_UIRT_setup (struct ftdi_private *priv)
{
- dbg("%s",__FUNCTION__);
+ dbg("%s",__func__);
priv->flags |= ASYNC_SPD_CUST;
priv->custom_divisor = 77;
* baudrate (38400 gets mapped to 100000) and RTS-CTS enabled. */
static void ftdi_HE_TIRA1_setup (struct ftdi_private *priv)
{
- dbg("%s",__FUNCTION__);
+ dbg("%s",__func__);
priv->flags |= ASYNC_SPD_CUST;
priv->custom_divisor = 240;
struct usb_device *udev = serial->dev;
struct usb_interface *interface = serial->interface;
- dbg("%s",__FUNCTION__);
+ dbg("%s",__func__);
if (interface == udev->actconfig->interface[0]) {
info("Ignoring serial port reserved for JTAG");
*/
static void ftdi_shutdown (struct usb_serial *serial)
{
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
}
static int ftdi_sio_port_remove(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
remove_sysfs_attrs(port);
int result = 0;
char buf[1]; /* Needed for the usb_control_msg I think */
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
spin_lock_irqsave(&priv->tx_lock, flags);
priv->tx_bytes = 0;
ftdi_read_bulk_callback, port);
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result)
- err("%s - failed submitting read urb, error %d", __FUNCTION__, result);
+ err("%s - failed submitting read urb, error %d", __func__, result);
return result;
struct ftdi_private *priv = usb_get_serial_port_data(port);
char buf[1];
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
mutex_lock(&port->serial->disc_mutex);
if (c_cflag & HUPCL && !port->serial->disconnected){
int transfer_size;
unsigned long flags;
- dbg("%s port %d, %d bytes", __FUNCTION__, port->number, count);
+ dbg("%s port %d, %d bytes", __func__, port->number, count);
if (count == 0) {
dbg("write request of 0 bytes");
spin_lock_irqsave(&priv->tx_lock, flags);
if (priv->tx_outstanding_urbs > URB_UPPER_LIMIT) {
spin_unlock_irqrestore(&priv->tx_lock, flags);
- dbg("%s - write limit hit\n", __FUNCTION__);
+ dbg("%s - write limit hit\n", __func__);
return 0;
}
priv->tx_outstanding_urbs++;
buffer = kmalloc (transfer_size, GFP_ATOMIC);
if (!buffer) {
- err("%s ran out of kernel memory for urb ...", __FUNCTION__);
+ err("%s ran out of kernel memory for urb ...", __func__);
count = -ENOMEM;
goto error_no_buffer;
}
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
- err("%s - no more free urbs", __FUNCTION__);
+ err("%s - no more free urbs", __func__);
count = -ENOMEM;
goto error_no_urb;
}
memcpy (buffer, buf, count);
}
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, transfer_size, buffer);
+ usb_serial_debug_data(debug, &port->dev, __func__, transfer_size, buffer);
/* fill the buffer and send it */
usb_fill_bulk_urb(urb, port->serial->dev,
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
- err("%s - failed submitting write urb, error %d", __FUNCTION__, status);
+ err("%s - failed submitting write urb, error %d", __func__, status);
count = status;
goto error;
} else {
* really free it when it is finished with it */
usb_free_urb(urb);
- dbg("%s write returning: %d", __FUNCTION__, count);
+ dbg("%s write returning: %d", __func__, count);
return count;
error:
usb_free_urb(urb);
/* free up the transfer buffer, as usb_free_urb() does not do this */
kfree (urb->transfer_buffer);
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (status) {
dbg("nonzero write bulk status received: %d", status);
priv = usb_get_serial_port_data(port);
if (!priv) {
- dbg("%s - bad port private data pointer - exiting", __FUNCTION__);
+ dbg("%s - bad port private data pointer - exiting", __func__);
return;
}
/* account for transferred data */
int room;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->tx_lock, flags);
if (priv->tx_outstanding_urbs < URB_UPPER_LIMIT) {
int buffered;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->tx_lock, flags);
buffered = (int)priv->tx_outstanding_bytes;
spin_unlock_irqrestore(&priv->tx_lock, flags);
if (buffered < 0) {
- err("%s outstanding tx bytes is negative!", __FUNCTION__);
+ err("%s outstanding tx bytes is negative!", __func__);
buffered = 0;
}
return buffered;
int status = urb->status;
if (urb->number_of_packets > 0) {
- err("%s transfer_buffer_length %d actual_length %d number of packets %d",__FUNCTION__,
+ err("%s transfer_buffer_length %d actual_length %d number of packets %d",__func__,
urb->transfer_buffer_length, urb->actual_length, urb->number_of_packets );
- err("%s transfer_flags %x ", __FUNCTION__,urb->transfer_flags );
+ err("%s transfer_flags %x ", __func__,urb->transfer_flags );
}
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (port->open_count <= 0)
return;
tty = port->tty;
if (!tty) {
- dbg("%s - bad tty pointer - exiting",__FUNCTION__);
+ dbg("%s - bad tty pointer - exiting",__func__);
return;
}
priv = usb_get_serial_port_data(port);
if (!priv) {
- dbg("%s - bad port private data pointer - exiting", __FUNCTION__);
+ dbg("%s - bad port private data pointer - exiting", __func__);
return;
}
if (urb != port->read_urb) {
- err("%s - Not my urb!", __FUNCTION__);
+ err("%s - Not my urb!", __func__);
}
if (status) {
int packet_offset;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (port->open_count <= 0)
return;
tty = port->tty;
if (!tty) {
- dbg("%s - bad tty pointer - exiting",__FUNCTION__);
+ dbg("%s - bad tty pointer - exiting",__func__);
return;
}
priv = usb_get_serial_port_data(port);
if (!priv) {
- dbg("%s - bad port private data pointer - exiting", __FUNCTION__);
+ dbg("%s - bad port private data pointer - exiting", __func__);
return;
}
urb = port->read_urb;
if (!urb) {
- dbg("%s - bad read_urb pointer - exiting", __FUNCTION__);
+ dbg("%s - bad read_urb pointer - exiting", __func__);
return;
}
data = urb->transfer_buffer;
if (priv->rx_processed) {
- dbg("%s - already processed: %d bytes, %d remain", __FUNCTION__,
+ dbg("%s - already processed: %d bytes, %d remain", __func__,
priv->rx_processed,
urb->actual_length - priv->rx_processed);
} else {
/* The first two bytes of every read packet are status */
if (urb->actual_length > 2) {
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+ usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
} else {
dbg("Status only: %03oo %03oo",data[0],data[1]);
}
length = min(PKTSZ, urb->actual_length-packet_offset)-2;
if (length < 0) {
- err("%s - bad packet length: %d", __FUNCTION__, length+2);
+ err("%s - bad packet length: %d", __func__, length+2);
length = 0;
}
if (priv->rx_flags & THROTTLED) {
- dbg("%s - throttled", __FUNCTION__);
+ dbg("%s - throttled", __func__);
break;
}
if (tty_buffer_request_room(tty, length) < length) {
/* break out & wait for throttling/unthrottling to happen */
- dbg("%s - receive room low", __FUNCTION__);
+ dbg("%s - receive room low", __func__);
break;
}
/* not completely processed - record progress */
priv->rx_processed = packet_offset;
dbg("%s - incomplete, %d bytes processed, %d remain",
- __FUNCTION__, packet_offset,
+ __func__, packet_offset,
urb->actual_length - packet_offset);
/* check if we were throttled while processing */
spin_lock_irqsave(&priv->rx_lock, flags);
priv->rx_flags |= ACTUALLY_THROTTLED;
spin_unlock_irqrestore(&priv->rx_lock, flags);
dbg("%s - deferring remainder until unthrottled",
- __FUNCTION__);
+ __func__);
return;
}
spin_unlock_irqrestore(&priv->rx_lock, flags);
/* delay processing of remainder */
schedule_delayed_work(&priv->rx_work, 1);
} else {
- dbg("%s - port is closed", __FUNCTION__);
+ dbg("%s - port is closed", __func__);
}
return;
}
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
+ err("%s - failed resubmitting read urb, error %d", __func__, result);
}
return;
FTDI_SIO_SET_DATA_REQUEST_TYPE,
urb_value , priv->interface,
buf, 0, WDR_TIMEOUT) < 0) {
- err("%s FAILED to enable/disable break state (state was %d)", __FUNCTION__,break_state);
+ err("%s FAILED to enable/disable break state (state was %d)", __func__,break_state);
}
- dbg("%s break state is %d - urb is %d", __FUNCTION__,break_state, urb_value);
+ dbg("%s break state is %d - urb is %d", __func__,break_state, urb_value);
}
unsigned char vstop;
unsigned char vstart;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/* Force baud rate if this device requires it, unless it is set to B0. */
if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) {
- dbg("%s: forcing baud rate for this device", __FUNCTION__);
+ dbg("%s: forcing baud rate for this device", __func__);
tty_encode_baud_rate(port->tty, priv->force_baud,
priv->force_baud);
}
/* Force RTS-CTS if this device requires it. */
if (priv->force_rtscts) {
- dbg("%s: forcing rtscts for this device", __FUNCTION__);
+ dbg("%s: forcing rtscts for this device", __func__);
termios->c_cflag |= CRTSCTS;
}
FTDI_SIO_SET_DATA_REQUEST_TYPE,
urb_value , priv->interface,
buf, 0, WDR_SHORT_TIMEOUT) < 0) {
- err("%s FAILED to set databits/stopbits/parity", __FUNCTION__);
+ err("%s FAILED to set databits/stopbits/parity", __func__);
}
/* Now do the baudrate */
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
0, priv->interface,
buf, 0, WDR_TIMEOUT) < 0) {
- err("%s error from disable flowcontrol urb", __FUNCTION__);
+ err("%s error from disable flowcontrol urb", __func__);
}
/* Drop RTS and DTR */
clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
} else {
/* set the baudrate determined before */
if (change_speed(port)) {
- err("%s urb failed to set baudrate", __FUNCTION__);
+ err("%s urb failed to set baudrate", __func__);
}
/* Ensure RTS and DTR are raised when baudrate changed from 0 */
if (!old_termios || (old_termios->c_cflag & CBAUD) == B0) {
/* Set flow control */
/* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */
if (cflag & CRTSCTS) {
- dbg("%s Setting to CRTSCTS flow control", __FUNCTION__);
+ dbg("%s Setting to CRTSCTS flow control", __func__);
if (usb_control_msg(dev,
usb_sndctrlpipe(dev, 0),
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
* if IXOFF is not set, the pre-xon/xoff code is executed.
*/
if (iflag & IXOFF) {
- dbg("%s request to enable xonxoff iflag=%04x",__FUNCTION__,iflag);
+ dbg("%s request to enable xonxoff iflag=%04x",__func__,iflag);
// Try to enable the XON/XOFF on the ftdi_sio
// Set the vstart and vstop -- could have been done up above where
// a lot of other dereferencing is done but that would be very
} else {
/* else clause to only run if cfag ! CRTSCTS and iflag ! XOFF */
/* CHECKME Assuming XON/XOFF handled by tty stack - not by device */
- dbg("%s Turning off hardware flow control", __FUNCTION__);
+ dbg("%s Turning off hardware flow control", __func__);
if (usb_control_msg(dev,
usb_sndctrlpipe(dev, 0),
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
unsigned char buf[2];
int ret;
- dbg("%s TIOCMGET", __FUNCTION__);
+ dbg("%s TIOCMGET", __func__);
switch (priv->chip_type) {
case SIO:
/* Request the status from the device */
FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
0, 0,
buf, 1, WDR_TIMEOUT)) < 0 ) {
- err("%s Could not get modem status of device - err: %d", __FUNCTION__,
+ err("%s Could not get modem status of device - err: %d", __func__,
ret);
return(ret);
}
FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
0, priv->interface,
buf, 2, WDR_TIMEOUT)) < 0 ) {
- err("%s Could not get modem status of device - err: %d", __FUNCTION__,
+ err("%s Could not get modem status of device - err: %d", __func__,
ret);
return(ret);
}
static int ftdi_tiocmset(struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear)
{
- dbg("%s TIOCMSET", __FUNCTION__);
+ dbg("%s TIOCMSET", __func__);
return update_mctrl(port, set, clear);
}
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
- dbg("%s cmd 0x%04x", __FUNCTION__, cmd);
+ dbg("%s cmd 0x%04x", __func__, cmd);
/* Based on code from acm.c and others */
switch (cmd) {
/* This is not necessarily an error - turns out the higher layers will do
* some ioctls itself (see comment above)
*/
- dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __FUNCTION__, cmd);
+ dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __func__, cmd);
return(-ENOIOCTLCMD);
} /* ftdi_ioctl */
struct ftdi_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->rx_lock, flags);
priv->rx_flags |= THROTTLED;
int actually_throttled;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->rx_lock, flags);
actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
{
int retval;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
if (vendor > 0 && product > 0) {
/* Add user specified VID/PID to reserved element of table. */
int i;
static void __exit ftdi_exit (void)
{
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
usb_deregister (&ftdi_driver);
usb_serial_deregister (&ftdi_sio_device);
if (tty && actual_length) {
usb_serial_debug_data(debug, &port->dev,
- __FUNCTION__, actual_length, data);
+ __func__, actual_length, data);
tty_buffer_request_room(tty, actual_length);
tty_insert_flip_string(tty, data, actual_length);
unsigned long flags;
struct garmin_packet *result = NULL;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
spin_lock_irqsave(&garmin_data_p->lock, flags);
while (!list_empty(&garmin_data_p->pktlist)) {
__u8 *ptr = pkt;
unsigned l = 0;
- dbg("%s - pkt-id: 0x%X.", __FUNCTION__, 0xFF & pkt_id);
+ dbg("%s - pkt-id: 0x%X.", __func__, 0xFF & pkt_id);
*ptr++ = DLE;
*ptr++ = ACK;
int size = recpkt[1];
usb_serial_debug_data(debug, &garmin_data_p->port->dev,
- __FUNCTION__, count-GSP_INITIAL_OFFSET, recpkt);
+ __func__, count-GSP_INITIAL_OFFSET, recpkt);
if (size != (count-GSP_INITIAL_OFFSET-3)) {
dbg("%s - invalid size, expected %d bytes, got %d",
- __FUNCTION__, size, (count-GSP_INITIAL_OFFSET-3));
+ __func__, size, (count-GSP_INITIAL_OFFSET-3));
return -EINVPKT;
}
// sanity check, remove after test ...
if ((__u8*)&(usbdata[3]) != recpkt) {
dbg("%s - ptr mismatch %p - %p",
- __FUNCTION__, &(usbdata[4]), recpkt);
+ __func__, &(usbdata[4]), recpkt);
return -EINVPKT;
}
if ((0xff & (cksum + *recpkt)) != 0) {
dbg("%s - invalid checksum, expected %02x, got %02x",
- __FUNCTION__, 0xff & -cksum, 0xff & *recpkt);
+ __func__, 0xff & -cksum, 0xff & *recpkt);
return -EINVPKT;
}
spin_unlock_irqrestore(&garmin_data_p->lock, flags);
dbg("%s - dle=%d skip=%d size=%d count=%d",
- __FUNCTION__, dleSeen, skip, size, count);
+ __func__, dleSeen, skip, size, count);
if (size == 0) {
size = GSP_INITIAL_OFFSET;
}
if (size >= GPS_IN_BUFSIZ) {
- dbg("%s - packet too large.", __FUNCTION__);
+ dbg("%s - packet too large.", __func__);
skip = 1;
size = GSP_INITIAL_OFFSET;
dleSeen = 0;
int i=0;
int k;
- dbg("%s - state %d - %d bytes.", __FUNCTION__,
+ dbg("%s - state %d - %d bytes.", __func__,
garmin_data_p->state, count);
k = garmin_data_p->outsize;
return 0;
}
- dbg("%s - %d bytes in buffer, %d bytes in pkt.", __FUNCTION__,
+ dbg("%s - %d bytes in buffer, %d bytes in pkt.", __func__,
k, i);
/* garmin_data_p->outbuffer now contains a complete packet */
usb_serial_debug_data(debug, &garmin_data_p->port->dev,
- __FUNCTION__, k, garmin_data_p->outbuffer);
+ __func__, k, garmin_data_p->outbuffer);
garmin_data_p->outsize = 0;
struct garmin_packet *pkt = NULL;
while ((pkt = pkt_pop(garmin_data_p)) != NULL) {
- dbg("%s - next pkt: %d", __FUNCTION__, pkt->seq);
+ dbg("%s - next pkt: %d", __func__, pkt->seq);
if (gsp_send(garmin_data_p, pkt->data, pkt->size) > 0) {
kfree(pkt);
return;
if (len >= GPS_IN_BUFSIZ) {
/* seem to be an invalid packet, ignore rest of input */
dbg("%s - packet size too large: %d",
- __FUNCTION__, len);
+ __func__, len);
garmin_data_p->insize = 0;
count = 0;
result = -EINVPKT;
spin_unlock_irqrestore(&garmin_data_p->lock, flags);
usb_kill_urb (port->interrupt_in_urb);
- dbg("%s - usb_reset_device", __FUNCTION__ );
+ dbg("%s - usb_reset_device", __func__ );
status = usb_reset_device(port->serial->dev);
if (status)
dbg("%s - usb_reset_device failed: %d",
- __FUNCTION__, status);
+ __func__, status);
return status;
}
if (status == 0) {
usb_kill_urb (port->interrupt_in_urb);
- dbg("%s - adding interrupt input", __FUNCTION__);
+ dbg("%s - adding interrupt input", __func__);
port->interrupt_in_urb->dev = serial->dev;
status = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (status)
dev_err(&serial->dev->dev,
"%s - failed submitting interrupt urb,"
" error %d\n",
- __FUNCTION__, status);
+ __func__, status);
}
if (status == 0) {
- dbg("%s - starting session ...", __FUNCTION__);
+ dbg("%s - starting session ...", __func__);
garmin_data_p->state = STATE_ACTIVE;
status = garmin_write_bulk(port, GARMIN_START_SESSION_REQ,
sizeof(GARMIN_START_SESSION_REQ),
int status = 0;
struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/*
* Force low_latency on so that our tty_push actually forces the data
struct usb_serial *serial = port->serial;
struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
- dbg("%s - port %d - mode=%d state=%d flags=0x%X", __FUNCTION__,
+ dbg("%s - port %d - mode=%d state=%d flags=0x%X", __func__,
port->number, garmin_data_p->mode,
garmin_data_p->state, garmin_data_p->flags);
if (port) {
struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (GARMIN_LAYERID_APPL == getLayerId(urb->transfer_buffer)
&& (garmin_data_p->mode == MODE_GARMIN_SERIAL)) {
if (status) {
dbg("%s - nonzero write bulk status received: %d",
- __FUNCTION__, urb->status);
+ __func__, urb->status);
spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->flags |= CLEAR_HALT_REQUIRED;
spin_unlock_irqrestore(&garmin_data_p->lock, flags);
unsigned char *buffer;
int status;
- dbg("%s - port %d, state %d", __FUNCTION__, port->number,
+ dbg("%s - port %d, state %d", __func__, port->number,
garmin_data_p->state);
spin_lock_irqsave(&garmin_data_p->lock, flags);
memcpy (buffer, buf, count);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, buffer);
+ usb_serial_debug_data(debug, &port->dev, __func__, count, buffer);
usb_fill_bulk_urb (urb, serial->dev,
usb_sndbulkpipe (serial->dev,
dev_err(&port->dev,
"%s - usb_submit_urb(write bulk) "
"failed with status = %d\n",
- __FUNCTION__, status);
+ __func__, status);
count = status;
}
struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
__le32 *privpkt = (__le32 *)garmin_data_p->privpkt;
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, buf);
+ usb_serial_debug_data(debug, &port->dev, __func__, count, buf);
/* check for our private packets */
if (count >= GARMIN_PKTHDR_LENGTH) {
&& GARMIN_LAYERID_PRIVATE == getLayerId(garmin_data_p->privpkt)) {
dbg("%s - processing private request %d",
- __FUNCTION__, pktid);
+ __func__, pktid);
// drop all unfinished transfers
garmin_clear(garmin_data_p);
return -EINVPKT;
debug = __le32_to_cpu(privpkt[3]);
dbg("%s - debug level set to 0x%X",
- __FUNCTION__, debug);
+ __func__, debug);
break;
case PRIV_PKTID_SET_MODE:
return -EINVPKT;
garmin_data_p->mode = __le32_to_cpu(privpkt[3]);
dbg("%s - mode set to %d",
- __FUNCTION__, garmin_data_p->mode);
+ __func__, garmin_data_p->mode);
break;
case PRIV_PKTID_INFO_REQ:
return -EINVPKT;
initial_mode = __le32_to_cpu(privpkt[3]);
dbg("%s - initial_mode set to %d",
- __FUNCTION__,
+ __func__,
garmin_data_p->mode);
break;
}
{
if (garmin_data_p->flags & FLAGS_DROP_DATA) {
/* abort-transfer cmd is actice */
- dbg("%s - pkt dropped", __FUNCTION__);
+ dbg("%s - pkt dropped", __func__);
} else if (garmin_data_p->state != STATE_DISCONNECTED &&
garmin_data_p->state != STATE_RESET ) {
int status = urb->status;
int retval;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (!serial) {
- dbg("%s - bad serial pointer, exiting", __FUNCTION__);
+ dbg("%s - bad serial pointer, exiting", __func__);
return;
}
if (status) {
dbg("%s - nonzero read bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
}
usb_serial_debug_data(debug, &port->dev,
- __FUNCTION__, urb->actual_length, data);
+ __func__, urb->actual_length, data);
garmin_read_process(garmin_data_p, data, urb->actual_length);
if (retval)
dev_err(&port->dev,
"%s - failed resubmitting read urb, error %d\n",
- __FUNCTION__, retval);
+ __func__, retval);
} else if (urb->actual_length > 0) {
/* Continue trying to read until nothing more is received */
if (0 == (garmin_data_p->flags & FLAGS_THROTTLED)) {
if (retval)
dev_err(&port->dev,
"%s - failed resubmitting read urb, "
- "error %d\n", __FUNCTION__, retval);
+ "error %d\n", __func__, retval);
}
} else {
- dbg("%s - end of bulk data", __FUNCTION__);
+ dbg("%s - end of bulk data", __func__);
spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->flags &= ~FLAGS_BULK_IN_ACTIVE;
spin_unlock_irqrestore(&garmin_data_p->lock, flags);
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
default:
dbg("%s - nonzero urb status received: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
}
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
+ usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, urb->transfer_buffer);
if (urb->actual_length == sizeof(GARMIN_BULK_IN_AVAIL_REPLY) &&
0 == memcmp(data, GARMIN_BULK_IN_AVAIL_REPLY,
sizeof(GARMIN_BULK_IN_AVAIL_REPLY))) {
- dbg("%s - bulk data available.", __FUNCTION__);
+ dbg("%s - bulk data available.", __func__);
if (0 == (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) {
if (retval) {
dev_err(&port->dev,
"%s - failed submitting read urb, error %d\n",
- __FUNCTION__, retval);
+ __func__, retval);
} else {
spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->flags |= FLAGS_BULK_IN_ACTIVE;
= __le32_to_cpup((__le32*)(data+GARMIN_PKTHDR_LENGTH));
dbg("%s - start-of-session reply seen - serial %u.",
- __FUNCTION__, garmin_data_p->serial_num);
+ __func__, garmin_data_p->serial_num);
}
if (garmin_data_p->ignorePkts) {
/* this reply belongs to a request generated by the driver,
ignore it. */
dbg("%s - pkt ignored (%d)",
- __FUNCTION__, garmin_data_p->ignorePkts);
+ __func__, garmin_data_p->ignorePkts);
spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->ignorePkts--;
spin_unlock_irqrestore(&garmin_data_p->lock, flags);
if (retval)
dev_err(&urb->dev->dev,
"%s - Error %d submitting interrupt urb\n",
- __FUNCTION__, retval);
+ __func__, retval);
}
unsigned long flags;
struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* set flag, data received will be put into a queue
for later processing */
spin_lock_irqsave(&garmin_data_p->lock, flags);
struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
int status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->flags &= ~FLAGS_THROTTLED;
spin_unlock_irqrestore(&garmin_data_p->lock, flags);
if (status)
dev_err(&port->dev,
"%s - failed resubmitting read urb, error %d\n",
- __FUNCTION__, status);
+ __func__, status);
}
}
struct usb_serial_port *port = serial->port[0];
struct garmin_data * garmin_data_p = NULL;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
garmin_data_p = kzalloc(sizeof(struct garmin_data), GFP_KERNEL);
if (garmin_data_p == NULL) {
- dev_err(&port->dev, "%s - Out of memory\n", __FUNCTION__);
+ dev_err(&port->dev, "%s - Out of memory\n", __func__);
return -ENOMEM;
}
init_timer(&garmin_data_p->timer);
struct usb_serial_port *port = serial->port[0];
struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
usb_kill_urb (port->interrupt_in_urb);
del_timer_sync(&garmin_data_p->timer);
int result = 0;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* force low_latency on so that our tty_push actually forces the data through,
otherwise it is scheduled, and with high data rates (like with OHCI) data
port);
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result)
- dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
}
return result;
{
struct usb_serial *serial = port->serial;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (serial->dev) {
/* shutdown any bulk reads that might be going on */
void usb_serial_generic_close (struct usb_serial_port *port, struct file * filp)
{
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
generic_cleanup (port);
}
int result;
unsigned char *data;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (count == 0) {
- dbg("%s - write request of 0 bytes", __FUNCTION__);
+ dbg("%s - write request of 0 bytes", __func__);
return (0);
}
spin_lock_irqsave(&port->lock, flags);
if (port->write_urb_busy) {
spin_unlock_irqrestore(&port->lock, flags);
- dbg("%s - already writing", __FUNCTION__);
+ dbg("%s - already writing", __func__);
return 0;
}
port->write_urb_busy = 1;
memcpy (port->write_urb->transfer_buffer, buf, count);
data = port->write_urb->transfer_buffer;
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, data);
+ usb_serial_debug_data(debug, &port->dev, __func__, count, data);
/* set up our urb */
usb_fill_bulk_urb (port->write_urb, serial->dev,
port->write_urb_busy = 1;
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
- dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __func__, result);
/* don't have to grab the lock here, as we will retry if != 0 */
port->write_urb_busy = 0;
} else
struct usb_serial *serial = port->serial;
int room = 0;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (serial->num_bulk_out) {
if (!(port->write_urb_busy))
room = port->bulk_out_size;
}
- dbg("%s - returns %d", __FUNCTION__, room);
+ dbg("%s - returns %d", __func__, room);
return (room);
}
struct usb_serial *serial = port->serial;
int chars = 0;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (serial->num_bulk_out) {
if (port->write_urb_busy)
chars = port->write_urb->transfer_buffer_length;
}
- dbg("%s - returns %d", __FUNCTION__, chars);
+ dbg("%s - returns %d", __func__, chars);
return (chars);
}
usb_serial_generic_read_bulk_callback), port);
result = usb_submit_urb(urb, mem_flags);
if (result)
- dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
}
/* Push data to tty layer and resubmit the bulk read URB */
int status = urb->status;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (unlikely(status != 0)) {
dbg("%s - nonzero read bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
}
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+ usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
/* Throttle the device if requested by tty */
spin_lock_irqsave(&port->lock, flags);
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
port->write_urb_busy = 0;
if (status) {
dbg("%s - nonzero write bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
}
{
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* Set the throttle request flag. It will be picked up
* by usb_serial_generic_read_bulk_callback(). */
int was_throttled;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* Clear the throttle flags */
spin_lock_irqsave(&port->lock, flags);
{
int i;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/* stop reads and writes on all ports */
for (i=0; i < serial->num_ports; ++i) {
struct usb_string_descriptor StringDesc;
struct usb_string_descriptor *pStringDesc;
- dbg("%s - USB String ID = %d", __FUNCTION__, Id );
+ dbg("%s - USB String ID = %d", __func__, Id );
if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, sizeof(StringDesc))) {
return 0;
unicode_to_ascii(string, buflen, pStringDesc->wData, pStringDesc->bLength/2);
kfree(pStringDesc);
- dbg("%s - USB String %s", __FUNCTION__, string);
+ dbg("%s - USB String %s", __func__, string);
return strlen(string);
}
struct usb_string_descriptor StringDesc;
struct usb_string_descriptor *pStringDesc;
- dbg("%s - USB String ID = %d", __FUNCTION__, Id );
+ dbg("%s - USB String ID = %d", __func__, Id );
if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, sizeof(StringDesc))) {
return 0;
sizeof(struct edge_compatibility_descriptor),
300);
- dbg("%s result = %d", __FUNCTION__, result);
+ dbg("%s result = %d", __func__, result);
if (result > 0) {
ep->is_epic = 1;
int result;
int status = urb->status;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
switch (status) {
case 0:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
default:
dbg("%s - nonzero urb status received: %d",
- __FUNCTION__, status);
+ __func__, status);
goto exit;
}
// process this interrupt-read even if there are no ports open
if (length) {
- usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __FUNCTION__, length, data);
+ usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __func__, length, data);
if (length > 1) {
bytes_avail = data[0] | (data[1] << 8);
if (bytes_avail) {
spin_lock(&edge_serial->es_lock);
edge_serial->rxBytesAvail += bytes_avail;
- dbg("%s - bytes_avail=%d, rxBytesAvail=%d, read_in_progress=%d", __FUNCTION__, bytes_avail, edge_serial->rxBytesAvail, edge_serial->read_in_progress);
+ dbg("%s - bytes_avail=%d, rxBytesAvail=%d, read_in_progress=%d", __func__, bytes_avail, edge_serial->rxBytesAvail, edge_serial->read_in_progress);
if (edge_serial->rxBytesAvail > 0 &&
!edge_serial->read_in_progress) {
- dbg("%s - posting a read", __FUNCTION__);
+ dbg("%s - posting a read", __func__);
edge_serial->read_in_progress = true;
/* we have pending bytes on the bulk in pipe, send a request */
edge_serial->read_urb->dev = edge_serial->serial->dev;
result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
if (result) {
- dev_err(&edge_serial->serial->dev->dev, "%s - usb_submit_urb(read bulk) failed with result = %d\n", __FUNCTION__, result);
+ dev_err(&edge_serial->serial->dev->dev, "%s - usb_submit_urb(read bulk) failed with result = %d\n", __func__, result);
edge_serial->read_in_progress = false;
}
}
spin_lock(&edge_port->ep_lock);
edge_port->txCredits += txCredits;
spin_unlock(&edge_port->ep_lock);
- dbg("%s - txcredits for port%d = %d", __FUNCTION__, portNumber, edge_port->txCredits);
+ dbg("%s - txcredits for port%d = %d", __func__, portNumber, edge_port->txCredits);
/* tell the tty driver that something has changed */
if (edge_port->port->tty)
exit:
result = usb_submit_urb (urb, GFP_ATOMIC);
if (result) {
- dev_err(&urb->dev->dev, "%s - Error %d submitting control urb\n", __FUNCTION__, result);
+ dev_err(&urb->dev->dev, "%s - Error %d submitting control urb\n", __func__, result);
}
}
__u16 raw_data_length;
int status = urb->status;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
if (status) {
dbg("%s - nonzero read bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
edge_serial->read_in_progress = false;
return;
}
if (urb->actual_length == 0) {
- dbg("%s - read bulk callback with no data", __FUNCTION__);
+ dbg("%s - read bulk callback with no data", __func__);
edge_serial->read_in_progress = false;
return;
}
raw_data_length = urb->actual_length;
- usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __FUNCTION__, raw_data_length, data);
+ usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __func__, raw_data_length, data);
spin_lock(&edge_serial->es_lock);
/* decrement our rxBytes available by the number that we just got */
edge_serial->rxBytesAvail -= raw_data_length;
- dbg("%s - Received = %d, rxBytesAvail %d", __FUNCTION__, raw_data_length, edge_serial->rxBytesAvail);
+ dbg("%s - Received = %d, rxBytesAvail %d", __func__, raw_data_length, edge_serial->rxBytesAvail);
process_rcvd_data (edge_serial, data, urb->actual_length);
/* check to see if there's any more data for us to read */
if (edge_serial->rxBytesAvail > 0) {
- dbg("%s - posting a read", __FUNCTION__);
+ dbg("%s - posting a read", __func__);
edge_serial->read_urb->dev = edge_serial->serial->dev;
retval = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
if (retval) {
dev_err(&urb->dev->dev,
"%s - usb_submit_urb(read bulk) failed, "
- "retval = %d\n", __FUNCTION__, retval);
+ "retval = %d\n", __func__, retval);
edge_serial->read_in_progress = false;
}
} else {
struct tty_struct *tty;
int status = urb->status;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
if (status) {
dbg("%s - nonzero write bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
}
tty = edge_port->port->tty;
struct tty_struct *tty;
int status = urb->status;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
atomic_dec(&CmdUrbs);
- dbg("%s - FREE URB %p (outstanding %d)", __FUNCTION__, urb, atomic_read(&CmdUrbs));
+ dbg("%s - FREE URB %p (outstanding %d)", __func__, urb, atomic_read(&CmdUrbs));
/* clean up the transfer buffer */
usb_free_urb (urb);
if (status) {
- dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, status);
+ dbg("%s - nonzero write bulk status received: %d", __func__, status);
return;
}
struct edgeport_serial *edge_serial;
int response;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return -ENODEV;
* this interrupt will continue as long as the edgeport is connected */
response = usb_submit_urb (edge_serial->interrupt_read_urb, GFP_KERNEL);
if (response) {
- dev_err(&port->dev, "%s - Error %d submitting control urb\n", __FUNCTION__, response);
+ dev_err(&port->dev, "%s - Error %d submitting control urb\n", __func__, response);
}
}
response = send_iosp_ext_cmd (edge_port, IOSP_CMD_OPEN_PORT, 0);
if (response < 0) {
- dev_err(&port->dev, "%s - error sending open port command\n", __FUNCTION__);
+ dev_err(&port->dev, "%s - error sending open port command\n", __func__);
edge_port->openPending = false;
return -ENODEV;
}
if (!edge_port->open) {
/* open timed out */
- dbg("%s - open timedout", __FUNCTION__);
+ dbg("%s - open timedout", __func__);
edge_port->openPending = false;
return -ENODEV;
}
edge_port->txfifo.fifo = kmalloc (edge_port->maxTxCredits, GFP_KERNEL);
if (!edge_port->txfifo.fifo) {
- dbg("%s - no memory", __FUNCTION__);
+ dbg("%s - no memory", __func__);
edge_close (port, filp);
return -ENOMEM;
}
edge_port->write_in_progress = false;
if (!edge_port->write_urb) {
- dbg("%s - no memory", __FUNCTION__);
+ dbg("%s - no memory", __func__);
edge_close (port, filp);
return -ENOMEM;
}
- dbg("%s(%d) - Initialize TX fifo to %d bytes", __FUNCTION__, port->number, edge_port->maxTxCredits);
+ dbg("%s(%d) - Initialize TX fifo to %d bytes", __func__, port->number, edge_port->maxTxCredits);
- dbg("%s exited", __FUNCTION__);
+ dbg("%s exited", __func__);
return 0;
}
// Did we get our Chase response
if (!edge_port->chaseResponsePending) {
- dbg("%s - Got Chase Response", __FUNCTION__);
+ dbg("%s - Got Chase Response", __func__);
// did we get all of our credit back?
if (edge_port->txCredits == edge_port->maxTxCredits ) {
- dbg("%s - Got all credits", __FUNCTION__);
+ dbg("%s - Got all credits", __func__);
return;
}
}
loop--;
if (loop == 0) {
edge_port->chaseResponsePending = false;
- dbg("%s - Chase TIMEOUT", __FUNCTION__);
+ dbg("%s - Chase TIMEOUT", __func__);
return;
}
} else {
// Reset timeout value back to 10 seconds
- dbg("%s - Last %d, Current %d", __FUNCTION__, lastCredits, edge_port->txCredits);
+ dbg("%s - Last %d, Current %d", __func__, lastCredits, edge_port->txCredits);
loop = 10;
}
}
// Is the Edgeport Buffer empty?
if (lastCount == 0) {
- dbg("%s - TX Buffer Empty", __FUNCTION__);
+ dbg("%s - TX Buffer Empty", __func__);
return;
}
schedule_timeout(timeout);
finish_wait(&edge_port->wait_chase, &wait);
- dbg("%s wait", __FUNCTION__);
+ dbg("%s wait", __func__);
if (lastCount == fifo->count) {
// No activity.. count down.
loop--;
if (loop == 0) {
- dbg("%s - TIMEOUT", __FUNCTION__);
+ dbg("%s - TIMEOUT", __func__);
return;
}
} else {
struct edgeport_port *edge_port;
int status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
edge_serial = usb_get_serial_data(port->serial);
edge_port = usb_get_serial_port_data(port);
/* flush and chase */
edge_port->chaseResponsePending = true;
- dbg("%s - Sending IOSP_CMD_CHASE_PORT", __FUNCTION__);
+ dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__);
status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0);
if (status == 0) {
// block until chase finished
((edge_serial->is_epic) &&
(edge_serial->epic_descriptor.Supports.IOSPClose))) {
/* close the port */
- dbg("%s - Sending IOSP_CMD_CLOSE_PORT", __FUNCTION__);
+ dbg("%s - Sending IOSP_CMD_CLOSE_PORT", __func__);
send_iosp_ext_cmd (edge_port, IOSP_CMD_CLOSE_PORT, 0);
}
kfree(edge_port->txfifo.fifo);
edge_port->txfifo.fifo = NULL;
- dbg("%s exited", __FUNCTION__);
+ dbg("%s exited", __func__);
}
/*****************************************************************************
int secondhalf;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return -ENODEV;
// calculate number of bytes to put in fifo
copySize = min ((unsigned int)count, (edge_port->txCredits - fifo->count));
- dbg("%s(%d) of %d byte(s) Fifo room %d -- will copy %d bytes", __FUNCTION__,
+ dbg("%s(%d) of %d byte(s) Fifo room %d -- will copy %d bytes", __func__,
port->number, count, edge_port->txCredits - fifo->count, copySize);
/* catch writes of 0 bytes which the tty driver likes to give us, and when txCredits is empty */
if (copySize == 0) {
- dbg("%s - copySize = Zero", __FUNCTION__);
+ dbg("%s - copySize = Zero", __func__);
goto finish_write;
}
bytesleft = fifo->size - fifo->head;
firsthalf = min (bytesleft, copySize);
- dbg("%s - copy %d bytes of %d into fifo ", __FUNCTION__, firsthalf, bytesleft);
+ dbg("%s - copy %d bytes of %d into fifo ", __func__, firsthalf, bytesleft);
/* now copy our data */
memcpy(&fifo->fifo[fifo->head], data, firsthalf);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, firsthalf, &fifo->fifo[fifo->head]);
+ usb_serial_debug_data(debug, &port->dev, __func__, firsthalf, &fifo->fifo[fifo->head]);
// update the index and size
fifo->head += firsthalf;
secondhalf = copySize-firsthalf;
if (secondhalf) {
- dbg("%s - copy rest of data %d", __FUNCTION__, secondhalf);
+ dbg("%s - copy rest of data %d", __func__, secondhalf);
memcpy(&fifo->fifo[fifo->head], &data[firsthalf], secondhalf);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, secondhalf, &fifo->fifo[fifo->head]);
+ usb_serial_debug_data(debug, &port->dev, __func__, secondhalf, &fifo->fifo[fifo->head]);
// update the index and size
fifo->count += secondhalf;
fifo->head += secondhalf;
send_more_port_data((struct edgeport_serial *)usb_get_serial_data(port->serial), edge_port);
- dbg("%s wrote %d byte(s) TxCredits %d, Fifo %d", __FUNCTION__, copySize, edge_port->txCredits, fifo->count);
+ dbg("%s wrote %d byte(s) TxCredits %d, Fifo %d", __func__, copySize, edge_port->txCredits, fifo->count);
return copySize;
}
int secondhalf;
unsigned long flags;
- dbg("%s(%d)", __FUNCTION__, edge_port->port->number);
+ dbg("%s(%d)", __func__, edge_port->port->number);
spin_lock_irqsave(&edge_port->ep_lock, flags);
if (edge_port->write_in_progress ||
!edge_port->open ||
(fifo->count == 0)) {
- dbg("%s(%d) EXIT - fifo %d, PendingWrite = %d", __FUNCTION__, edge_port->port->number, fifo->count, edge_port->write_in_progress);
+ dbg("%s(%d) EXIT - fifo %d, PendingWrite = %d", __func__, edge_port->port->number, fifo->count, edge_port->write_in_progress);
goto exit_send;
}
// it's better to wait for more credits so we can do a larger
// write.
if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits,EDGE_FW_BULK_MAX_PACKET_SIZE)) {
- dbg("%s(%d) Not enough credit - fifo %d TxCredit %d", __FUNCTION__, edge_port->port->number, fifo->count, edge_port->txCredits );
+ dbg("%s(%d) Not enough credit - fifo %d TxCredit %d", __func__, edge_port->port->number, fifo->count, edge_port->txCredits );
goto exit_send;
}
count = fifo->count;
buffer = kmalloc (count+2, GFP_ATOMIC);
if (buffer == NULL) {
- dev_err(&edge_port->port->dev, "%s - no more kernel memory...\n", __FUNCTION__);
+ dev_err(&edge_port->port->dev, "%s - no more kernel memory...\n", __func__);
edge_port->write_in_progress = false;
goto exit_send;
}
}
if (count)
- usb_serial_debug_data(debug, &edge_port->port->dev, __FUNCTION__, count, &buffer[2]);
+ usb_serial_debug_data(debug, &edge_port->port->dev, __func__, count, &buffer[2]);
/* fill up the urb with all of our data and submit it */
usb_fill_bulk_urb (urb, edge_serial->serial->dev,
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
/* something went wrong */
- dev_err(&edge_port->port->dev, "%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n", __FUNCTION__, status);
+ dev_err(&edge_port->port->dev, "%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n", __func__, status);
edge_port->write_in_progress = false;
/* revert the credits as something bad happened. */
edge_port->txCredits += count;
edge_port->icount.tx -= count;
}
- dbg("%s wrote %d byte(s) TxCredit %d, Fifo %d", __FUNCTION__, count, edge_port->txCredits, fifo->count);
+ dbg("%s wrote %d byte(s) TxCredit %d, Fifo %d", __func__, count, edge_port->txCredits, fifo->count);
exit_send:
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
int room;
unsigned long flags;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
if (edge_port == NULL)
return -ENODEV;
if (edge_port->closePending)
return -ENODEV;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (!edge_port->open) {
- dbg("%s - port not opened", __FUNCTION__);
+ dbg("%s - port not opened", __func__);
return -EINVAL;
}
room = edge_port->txCredits - edge_port->txfifo.count;
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
- dbg("%s - returns %d", __FUNCTION__, room);
+ dbg("%s - returns %d", __func__, room);
return room;
}
int num_chars;
unsigned long flags;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
if (edge_port == NULL)
return -ENODEV;
return -ENODEV;
if (!edge_port->open) {
- dbg("%s - port not opened", __FUNCTION__);
+ dbg("%s - port not opened", __func__);
return -EINVAL;
}
num_chars = edge_port->maxTxCredits - edge_port->txCredits + edge_port->txfifo.count;
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
if (num_chars) {
- dbg("%s(port %d) - returns %d", __FUNCTION__, port->number, num_chars);
+ dbg("%s(port %d) - returns %d", __func__, port->number, num_chars);
}
return num_chars;
struct tty_struct *tty;
int status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return;
if (!edge_port->open) {
- dbg("%s - port not opened", __FUNCTION__);
+ dbg("%s - port not opened", __func__);
return;
}
tty = port->tty;
if (!tty) {
- dbg ("%s - no tty available", __FUNCTION__);
+ dbg ("%s - no tty available", __func__);
return;
}
struct tty_struct *tty;
int status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return;
if (!edge_port->open) {
- dbg("%s - port not opened", __FUNCTION__);
+ dbg("%s - port not opened", __func__);
return;
}
tty = port->tty;
if (!tty) {
- dbg ("%s - no tty available", __FUNCTION__);
+ dbg ("%s - no tty available", __func__);
return;
}
unsigned int cflag;
cflag = tty->termios->c_cflag;
- dbg("%s - clfag %08x iflag %08x", __FUNCTION__,
+ dbg("%s - clfag %08x iflag %08x", __func__,
tty->termios->c_cflag, tty->termios->c_iflag);
- dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__,
+ dbg("%s - old clfag %08x old iflag %08x", __func__,
old_termios->c_cflag, old_termios->c_iflag);
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return;
if (!edge_port->open) {
- dbg("%s - port not opened", __FUNCTION__);
+ dbg("%s - port not opened", __func__);
return;
}
spin_lock_irqsave(&edge_port->ep_lock, flags);
if (edge_port->maxTxCredits == edge_port->txCredits &&
edge_port->txfifo.count == 0) {
- dbg("%s -- Empty", __FUNCTION__);
+ dbg("%s -- Empty", __func__);
result = TIOCSER_TEMT;
}
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
result = tty->read_cnt;
- dbg("%s(%d) = %d", __FUNCTION__, edge_port->port->number, result);
+ dbg("%s(%d) = %d", __func__, edge_port->port->number, result);
if (copy_to_user(value, &result, sizeof(int)))
return -EFAULT;
//return 0;
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
unsigned int mcr;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
mcr = edge_port->shadowMCR;
if (set & TIOCM_RTS)
unsigned int msr;
unsigned int mcr;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
msr = edge_port->shadowMSR;
mcr = edge_port->shadowMCR;
| ((msr & EDGEPORT_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */
- dbg("%s -- %x", __FUNCTION__, result);
+ dbg("%s -- %x", __func__, result);
return result;
}
struct async_icount cprev;
struct serial_icounter_struct icount;
- dbg("%s - port %d, cmd = 0x%x", __FUNCTION__, port->number, cmd);
+ dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
switch (cmd) {
// return number of bytes available
case TIOCINQ:
- dbg("%s (%d) TIOCINQ", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCINQ", __func__, port->number);
return get_number_bytes_avail(edge_port, (unsigned int __user *) arg);
break;
case TIOCSERGETLSR:
- dbg("%s (%d) TIOCSERGETLSR", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
return get_lsr_info(edge_port, (unsigned int __user *) arg);
return 0;
case TIOCGSERIAL:
- dbg("%s (%d) TIOCGSERIAL", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
return get_serial_info(edge_port, (struct serial_struct __user *) arg);
case TIOCSSERIAL:
- dbg("%s (%d) TIOCSSERIAL", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCSSERIAL", __func__, port->number);
break;
case TIOCMIWAIT:
- dbg("%s (%d) TIOCMIWAIT", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
cprev = edge_port->icount;
while (1) {
prepare_to_wait(&edge_port->delta_msr_wait, &wait, TASK_INTERRUPTIBLE);
icount.brk = cnow.brk;
icount.buf_overrun = cnow.buf_overrun;
- dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__, port->number, icount.rx, icount.tx );
+ dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__, port->number, icount.rx, icount.tx );
if (copy_to_user((void __user *)arg, &icount, sizeof(icount)))
return -EFAULT;
return 0;
/* flush and chase */
edge_port->chaseResponsePending = true;
- dbg("%s - Sending IOSP_CMD_CHASE_PORT", __FUNCTION__);
+ dbg("%s - Sending IOSP_CMD_CHASE_PORT", __func__);
status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0);
if (status == 0) {
// block until chase finished
((edge_serial->is_epic) &&
(edge_serial->epic_descriptor.Supports.IOSPSetClrBreak))) {
if (break_state == -1) {
- dbg("%s - Sending IOSP_CMD_SET_BREAK", __FUNCTION__);
+ dbg("%s - Sending IOSP_CMD_SET_BREAK", __func__);
status = send_iosp_ext_cmd (edge_port, IOSP_CMD_SET_BREAK, 0);
} else {
- dbg("%s - Sending IOSP_CMD_CLEAR_BREAK", __FUNCTION__);
+ dbg("%s - Sending IOSP_CMD_CLEAR_BREAK", __func__);
status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CLEAR_BREAK, 0);
}
if (status) {
- dbg("%s - error sending break set/clear command.", __FUNCTION__);
+ dbg("%s - error sending break set/clear command.", __func__);
}
}
__u16 lastBufferLength;
__u16 rxLen;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
lastBufferLength = bufferLength + 1;
while (bufferLength > 0) {
/* failsafe incase we get a message that we don't understand */
if (lastBufferLength == bufferLength) {
- dbg("%s - stuck in loop, exiting it.", __FUNCTION__);
+ dbg("%s - stuck in loop, exiting it.", __func__);
break;
}
lastBufferLength = bufferLength;
++buffer;
--bufferLength;
- dbg("%s - Hdr1=%02X Hdr2=%02X", __FUNCTION__, edge_serial->rxHeader1, edge_serial->rxHeader2);
+ dbg("%s - Hdr1=%02X Hdr2=%02X", __func__, edge_serial->rxHeader1, edge_serial->rxHeader2);
// Process depending on whether this header is
// data or status
edge_serial->rxPort = IOSP_GET_HDR_PORT(edge_serial->rxHeader1);
edge_serial->rxBytesRemaining = IOSP_GET_HDR_DATA_LEN(edge_serial->rxHeader1, edge_serial->rxHeader2);
- dbg("%s - Data for Port %u Len %u", __FUNCTION__, edge_serial->rxPort, edge_serial->rxBytesRemaining);
+ dbg("%s - Data for Port %u Len %u", __func__, edge_serial->rxPort, edge_serial->rxBytesRemaining);
//ASSERT( DevExt->RxPort < DevExt->NumPorts );
//ASSERT( DevExt->RxBytesRemaining < IOSP_MAX_DATA_LENGTH );
if (edge_port->open) {
tty = edge_port->port->tty;
if (tty) {
- dbg("%s - Sending %d bytes to TTY for port %d", __FUNCTION__, rxLen, edge_serial->rxPort);
+ dbg("%s - Sending %d bytes to TTY for port %d", __func__, rxLen, edge_serial->rxPort);
edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen);
}
edge_port->icount.rx += rxLen;
port = edge_serial->serial->port[edge_serial->rxPort];
edge_port = usb_get_serial_port_data(port);
if (edge_port == NULL) {
- dev_err(&edge_serial->serial->dev->dev, "%s - edge_port == NULL for port %d\n", __FUNCTION__, edge_serial->rxPort);
+ dev_err(&edge_serial->serial->dev->dev, "%s - edge_port == NULL for port %d\n", __func__, edge_serial->rxPort);
return;
}
- dbg("%s - port %d", __FUNCTION__, edge_serial->rxPort);
+ dbg("%s - port %d", __func__, edge_serial->rxPort);
if (code == IOSP_EXT_STATUS) {
switch (byte2) {
case IOSP_EXT_STATUS_CHASE_RSP:
// we want to do EXT status regardless of port open/closed
- dbg("%s - Port %u EXT CHASE_RSP Data = %02x", __FUNCTION__, edge_serial->rxPort, byte3 );
+ dbg("%s - Port %u EXT CHASE_RSP Data = %02x", __func__, edge_serial->rxPort, byte3 );
// Currently, the only EXT_STATUS is Chase, so process here instead of one more call
// to one more subroutine. If/when more EXT_STATUS, there'll be more work to do.
// Also, we currently clear flag and close the port regardless of content of above's Byte3.
return;
case IOSP_EXT_STATUS_RX_CHECK_RSP:
- dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", __FUNCTION__, edge_serial->rxPort, byte3 );
+ dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", __func__, edge_serial->rxPort, byte3 );
//Port->RxCheckRsp = true;
return;
}
if (code == IOSP_STATUS_OPEN_RSP) {
edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3);
edge_port->maxTxCredits = edge_port->txCredits;
- dbg("%s - Port %u Open Response Inital MSR = %02x TxBufferSize = %d", __FUNCTION__, edge_serial->rxPort, byte2, edge_port->txCredits);
+ dbg("%s - Port %u Open Response Inital MSR = %02x TxBufferSize = %d", __func__, edge_serial->rxPort, byte2, edge_port->txCredits);
handle_new_msr (edge_port, byte2);
/* send the current line settings to the port so we are in sync with any further termios calls */
switch (code) {
// Not currently sent by Edgeport
case IOSP_STATUS_LSR:
- dbg("%s - Port %u LSR Status = %02x", __FUNCTION__, edge_serial->rxPort, byte2);
+ dbg("%s - Port %u LSR Status = %02x", __func__, edge_serial->rxPort, byte2);
handle_new_lsr(edge_port, false, byte2, 0);
break;
case IOSP_STATUS_LSR_DATA:
- dbg("%s - Port %u LSR Status = %02x, Data = %02x", __FUNCTION__, edge_serial->rxPort, byte2, byte3);
+ dbg("%s - Port %u LSR Status = %02x, Data = %02x", __func__, edge_serial->rxPort, byte2, byte3);
// byte2 is LSR Register
// byte3 is broken data byte
handle_new_lsr(edge_port, true, byte2, byte3);
break;
//
// case IOSP_EXT_4_STATUS:
- // dbg("%s - Port %u LSR Status = %02x Data = %02x", __FUNCTION__, edge_serial->rxPort, byte2, byte3);
+ // dbg("%s - Port %u LSR Status = %02x Data = %02x", __func__, edge_serial->rxPort, byte2, byte3);
// break;
//
case IOSP_STATUS_MSR:
- dbg("%s - Port %u MSR Status = %02x", __FUNCTION__, edge_serial->rxPort, byte2);
+ dbg("%s - Port %u MSR Status = %02x", __func__, edge_serial->rxPort, byte2);
// Process this new modem status and generate appropriate
// events, etc, based on the new status. This routine
break;
default:
- dbg("%s - Unrecognized IOSP status code %u\n", __FUNCTION__, code);
+ dbg("%s - Unrecognized IOSP status code %u\n", __func__, code);
break;
}
cnt = tty_buffer_request_room(tty, length);
if (cnt < length) {
dev_err(dev, "%s - dropping data, %d bytes lost\n",
- __FUNCTION__, length - cnt);
+ __func__, length - cnt);
if(cnt == 0)
break;
}
{
struct async_icount *icount;
- dbg("%s %02x", __FUNCTION__, newMsr);
+ dbg("%s %02x", __func__, newMsr);
if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) {
icount = &edge_port->icount;
__u8 newLsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK));
struct async_icount *icount;
- dbg("%s - %02x", __FUNCTION__, newLsr);
+ dbg("%s - %02x", __func__, newLsr);
edge_port->shadowLSR = lsr;
__u16 current_length;
unsigned char *transfer_buffer;
- dbg("%s - %x, %x, %d", __FUNCTION__, extAddr, addr, length);
+ dbg("%s - %x, %x, %d", __func__, extAddr, addr, length);
transfer_buffer = kmalloc (64, GFP_KERNEL);
if (!transfer_buffer) {
- dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, 64);
+ dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __func__, 64);
return -ENOMEM;
}
} else {
current_length = length;
}
-// dbg("%s - writing %x, %x, %d", __FUNCTION__, extAddr, addr, current_length);
+// dbg("%s - writing %x, %x, %d", __func__, extAddr, addr, current_length);
memcpy (transfer_buffer, data, current_length);
result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), USB_REQUEST_ION_WRITE_RAM,
0x40, addr, extAddr, transfer_buffer, current_length, 300);
__u16 current_length;
unsigned char *transfer_buffer;
-// dbg("%s - %x, %x, %d", __FUNCTION__, extAddr, addr, length);
+// dbg("%s - %x, %x, %d", __func__, extAddr, addr, length);
transfer_buffer = kmalloc (64, GFP_KERNEL);
if (!transfer_buffer) {
- dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, 64);
+ dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __func__, 64);
return -ENOMEM;
}
} else {
current_length = length;
}
-// dbg("%s - writing %x, %x, %d", __FUNCTION__, extAddr, addr, current_length);
+// dbg("%s - writing %x, %x, %d", __func__, extAddr, addr, current_length);
memcpy (transfer_buffer, data, current_length);
result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), USB_REQUEST_ION_WRITE_ROM,
0x40, addr, extAddr, transfer_buffer, current_length, 300);
__u16 current_length;
unsigned char *transfer_buffer;
- dbg("%s - %x, %x, %d", __FUNCTION__, extAddr, addr, length);
+ dbg("%s - %x, %x, %d", __func__, extAddr, addr, length);
transfer_buffer = kmalloc (64, GFP_KERNEL);
if (!transfer_buffer) {
- dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, 64);
+ dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __func__, 64);
return -ENOMEM;
}
} else {
current_length = length;
}
-// dbg("%s - %x, %x, %d", __FUNCTION__, extAddr, addr, current_length);
+// dbg("%s - %x, %x, %d", __func__, extAddr, addr, current_length);
result = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0), USB_REQUEST_ION_READ_ROM,
0xC0, addr, extAddr, transfer_buffer, current_length, 300);
if (result < 0)
int length = 0;
int status = 0;
- dbg("%s - %d, %d", __FUNCTION__, command, param);
+ dbg("%s - %d, %d", __func__, command, param);
buffer = kmalloc (10, GFP_ATOMIC);
if (!buffer) {
- dev_err(&edge_port->port->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, 10);
+ dev_err(&edge_port->port->dev, "%s - kmalloc(%d) failed.\n", __func__, 10);
return -ENOMEM;
}
struct urb *urb;
int timeout;
- usb_serial_debug_data(debug, &edge_port->port->dev, __FUNCTION__, length, buffer);
+ usb_serial_debug_data(debug, &edge_port->port->dev, __func__, length, buffer);
/* Allocate our next urb */
urb = usb_alloc_urb (0, GFP_ATOMIC);
return -ENOMEM;
atomic_inc(&CmdUrbs);
- dbg("%s - ALLOCATE URB %p (outstanding %d)", __FUNCTION__, urb, atomic_read(&CmdUrbs));
+ dbg("%s - ALLOCATE URB %p (outstanding %d)", __func__, urb, atomic_read(&CmdUrbs));
usb_fill_bulk_urb (urb, edge_serial->serial->dev,
usb_sndbulkpipe(edge_serial->serial->dev, edge_serial->bulk_out_endpoint),
if (status) {
/* something went wrong */
- dev_err(&edge_port->port->dev, "%s - usb_submit_urb(write command) failed, status = %d\n", __FUNCTION__, status);
+ dev_err(&edge_port->port->dev, "%s - usb_submit_urb(write command) failed, status = %d\n", __func__, status);
usb_kill_urb(urb);
usb_free_urb(urb);
atomic_dec(&CmdUrbs);
if (edge_port->commandPending) {
/* command timed out */
- dbg("%s - command timed out", __FUNCTION__);
+ dbg("%s - command timed out", __func__);
status = -EINVAL;
}
#endif
return 0;
}
- dbg("%s - port = %d, baud = %d", __FUNCTION__, edge_port->port->number, baudRate);
+ dbg("%s - port = %d, baud = %d", __func__, edge_port->port->number, baudRate);
status = calc_baud_rate_divisor (baudRate, &divisor);
if (status) {
- dev_err(&edge_port->port->dev, "%s - bad baud rate\n", __FUNCTION__);
+ dev_err(&edge_port->port->dev, "%s - bad baud rate\n", __func__);
return status;
}
// Alloc memory for the string of commands.
cmdBuffer = kmalloc (0x100, GFP_ATOMIC);
if (!cmdBuffer) {
- dev_err(&edge_port->port->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, 0x100);
+ dev_err(&edge_port->port->dev, "%s - kmalloc(%d) failed.\n", __func__, 0x100);
return -ENOMEM;
}
currCmd = cmdBuffer;
__u16 custom;
- dbg("%s - %d", __FUNCTION__, baudrate);
+ dbg("%s - %d", __func__, baudrate);
for (i = 0; i < ARRAY_SIZE(divisor_table); i++) {
if ( divisor_table[i].BaudRate == baudrate ) {
*divisor = custom;
- dbg("%s - Baud %d = %d\n", __FUNCTION__, baudrate, custom);
+ dbg("%s - Baud %d = %d\n", __func__, baudrate, custom);
return 0;
}
unsigned long cmdLen = 0;
int status;
- dbg("%s - write to %s register 0x%02x", (regNum == MCR) ? "MCR" : "LCR", __FUNCTION__, regValue);
+ dbg("%s - write to %s register 0x%02x", (regNum == MCR) ? "MCR" : "LCR", __func__, regValue);
if (edge_serial->is_epic &&
!edge_serial->epic_descriptor.Supports.IOSPWriteMCR &&
__u8 txFlow;
int status;
- dbg("%s - port %d", __FUNCTION__, edge_port->port->number);
+ dbg("%s - port %d", __func__, edge_port->port->number);
if (!edge_port->open &&
!edge_port->openPending) {
- dbg("%s - port not opened", __FUNCTION__);
+ dbg("%s - port not opened", __func__);
return;
}
tty = edge_port->port->tty;
if ((!tty) ||
(!tty->termios)) {
- dbg("%s - no tty structures", __FUNCTION__);
+ dbg("%s - no tty structures", __func__);
return;
}
cflag = tty->termios->c_cflag;
switch (cflag & CSIZE) {
- case CS5: lData = LCR_BITS_5; mask = 0x1f; dbg("%s - data bits = 5", __FUNCTION__); break;
- case CS6: lData = LCR_BITS_6; mask = 0x3f; dbg("%s - data bits = 6", __FUNCTION__); break;
- case CS7: lData = LCR_BITS_7; mask = 0x7f; dbg("%s - data bits = 7", __FUNCTION__); break;
+ case CS5: lData = LCR_BITS_5; mask = 0x1f; dbg("%s - data bits = 5", __func__); break;
+ case CS6: lData = LCR_BITS_6; mask = 0x3f; dbg("%s - data bits = 6", __func__); break;
+ case CS7: lData = LCR_BITS_7; mask = 0x7f; dbg("%s - data bits = 7", __func__); break;
default:
- case CS8: lData = LCR_BITS_8; dbg("%s - data bits = 8", __FUNCTION__); break;
+ case CS8: lData = LCR_BITS_8; dbg("%s - data bits = 8", __func__); break;
}
lParity = LCR_PAR_NONE;
if (cflag & CMSPAR) {
if (cflag & PARODD) {
lParity = LCR_PAR_MARK;
- dbg("%s - parity = mark", __FUNCTION__);
+ dbg("%s - parity = mark", __func__);
} else {
lParity = LCR_PAR_SPACE;
- dbg("%s - parity = space", __FUNCTION__);
+ dbg("%s - parity = space", __func__);
}
} else if (cflag & PARODD) {
lParity = LCR_PAR_ODD;
- dbg("%s - parity = odd", __FUNCTION__);
+ dbg("%s - parity = odd", __func__);
} else {
lParity = LCR_PAR_EVEN;
- dbg("%s - parity = even", __FUNCTION__);
+ dbg("%s - parity = even", __func__);
}
} else {
- dbg("%s - parity = none", __FUNCTION__);
+ dbg("%s - parity = none", __func__);
}
if (cflag & CSTOPB) {
lStop = LCR_STOP_2;
- dbg("%s - stop bits = 2", __FUNCTION__);
+ dbg("%s - stop bits = 2", __func__);
} else {
lStop = LCR_STOP_1;
- dbg("%s - stop bits = 1", __FUNCTION__);
+ dbg("%s - stop bits = 1", __func__);
}
/* figure out the flow control settings */
if (cflag & CRTSCTS) {
rxFlow |= IOSP_RX_FLOW_RTS;
txFlow |= IOSP_TX_FLOW_CTS;
- dbg("%s - RTS/CTS is enabled", __FUNCTION__);
+ dbg("%s - RTS/CTS is enabled", __func__);
} else {
- dbg("%s - RTS/CTS is disabled", __FUNCTION__);
+ dbg("%s - RTS/CTS is disabled", __func__);
}
/* if we are implementing XON/XOFF, set the start and stop character in the device */
/* if we are implementing INBOUND XON/XOFF */
if (I_IXOFF(tty)) {
rxFlow |= IOSP_RX_FLOW_XON_XOFF;
- dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", __FUNCTION__, start_char, stop_char);
+ dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", __func__, start_char, stop_char);
} else {
- dbg("%s - INBOUND XON/XOFF is disabled", __FUNCTION__);
+ dbg("%s - INBOUND XON/XOFF is disabled", __func__);
}
/* if we are implementing OUTBOUND XON/XOFF */
if (I_IXON(tty)) {
txFlow |= IOSP_TX_FLOW_XON_XOFF;
- dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", __FUNCTION__, start_char, stop_char);
+ dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", __func__, start_char, stop_char);
} else {
- dbg("%s - OUTBOUND XON/XOFF is disabled", __FUNCTION__);
+ dbg("%s - OUTBOUND XON/XOFF is disabled", __func__);
}
}
baud = 9600;
}
- dbg("%s - baud rate = %d", __FUNCTION__, baud);
+ dbg("%s - baud rate = %d", __func__, baud);
status = send_cmd_write_baud_rate (edge_port, baud);
if (status == -1) {
/* Speed change was not possible - put back the old speed */
/* create our private serial structure */
edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
if (edge_serial == NULL) {
- dev_err(&serial->dev->dev, "%s - Out of memory\n", __FUNCTION__);
+ dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
return -ENOMEM;
}
spin_lock_init(&edge_serial->es_lock);
serial->num_ports);
}
- dbg("%s - time 1 %ld", __FUNCTION__, jiffies);
+ dbg("%s - time 1 %ld", __func__, jiffies);
/* If not an EPiC device */
if (!edge_serial->is_epic) {
/* now load the application firmware into this device */
load_application_firmware (edge_serial);
- dbg("%s - time 2 %ld", __FUNCTION__, jiffies);
+ dbg("%s - time 2 %ld", __func__, jiffies);
/* Check current Edgeport EEPROM and update if necessary */
update_edgeport_E2PROM (edge_serial);
- dbg("%s - time 3 %ld", __FUNCTION__, jiffies);
+ dbg("%s - time 3 %ld", __func__, jiffies);
/* set the configuration to use #1 */
// dbg("set_configuration 1");
for (i = 0; i < serial->num_ports; ++i) {
edge_port = kmalloc (sizeof(struct edgeport_port), GFP_KERNEL);
if (edge_port == NULL) {
- dev_err(&serial->dev->dev, "%s - Out of memory\n", __FUNCTION__);
+ dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
for (j = 0; j < i; ++j) {
kfree (usb_get_serial_port_data(serial->port[j]));
usb_set_serial_port_data(serial->port[j], NULL);
* continue as long as the edgeport is connected */
response = usb_submit_urb(edge_serial->interrupt_read_urb, GFP_KERNEL);
if (response)
- err("%s - Error %d submitting control urb", __FUNCTION__, response);
+ err("%s - Error %d submitting control urb", __func__, response);
}
return response;
}
struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
int i;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/* stop reads and writes on all ports */
for (i=0; i < serial->num_ports; ++i) {
return status;
if (status != size) {
dbg ("%s - wanted to write %d, but only wrote %d",
- __FUNCTION__, size, status);
+ __func__, size, status);
return -ECOMM;
}
return 0;
return status;
if (status != size) {
dbg ("%s - wanted to write %d, but only wrote %d",
- __FUNCTION__, size, status);
+ __func__, size, status);
return -ECOMM;
}
return 0;
{
int port_number = port->number - port->serial->minor;
- dbg ("%s - port %d, mask %x", __FUNCTION__, port_number, mask);
+ dbg ("%s - port %d, mask %x", __func__, port_number, mask);
return TIWriteCommandSync (port->serial->dev,
UMPC_PURGE_PORT,
__u8 read_length;
__be16 be_start_address;
- dbg ("%s - @ %x for %d", __FUNCTION__, start_address, length);
+ dbg ("%s - @ %x for %d", __func__, start_address, length);
/* Read in blocks of 64 bytes
* (TI firmware can't handle more than 64 byte reads)
read_length = (__u8)length;
if (read_length > 1) {
- dbg ("%s - @ %x for %d", __FUNCTION__,
+ dbg ("%s - @ %x for %d", __func__,
start_address, read_length);
}
be_start_address = cpu_to_be16 (start_address);
read_length); // TransferBufferLength
if (status) {
- dbg ("%s - ERROR %x", __FUNCTION__, status);
+ dbg ("%s - ERROR %x", __func__, status);
return status;
}
if (read_length > 1) {
- usb_serial_debug_data(debug, &dev->dev, __FUNCTION__,
+ usb_serial_debug_data(debug, &dev->dev, __func__,
read_length, buffer);
}
&buffer[i], // TransferBuffer
0x01); // TransferBufferLength
if (status) {
- dbg ("%s - ERROR %x", __FUNCTION__, status);
+ dbg ("%s - ERROR %x", __func__, status);
return status;
}
}
- dbg ("%s - start_address = %x, length = %d", __FUNCTION__, start_address, length);
- usb_serial_debug_data(debug, &serial->serial->dev->dev, __FUNCTION__, length, buffer);
+ dbg ("%s - start_address = %x, length = %d", __func__, start_address, length);
+ usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, length, buffer);
serial->TiReadI2C = 1;
return status;
}
- dbg ("%s - start_sddr = %x, length = %d", __FUNCTION__, start_address, length);
- usb_serial_debug_data(debug, &serial->serial->dev->dev, __FUNCTION__, length, buffer);
+ dbg ("%s - start_sddr = %x, length = %d", __func__, start_address, length);
+ usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, length, buffer);
return status;
}
if (write_length > length)
write_length = length;
- dbg ("%s - BytesInFirstPage Addr = %x, length = %d", __FUNCTION__, start_address, write_length);
- usb_serial_debug_data(debug, &serial->serial->dev->dev, __FUNCTION__, write_length, buffer);
+ dbg ("%s - BytesInFirstPage Addr = %x, length = %d", __func__, start_address, write_length);
+ usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, write_length, buffer);
/* Write first page */
be_start_address = cpu_to_be16 (start_address);
buffer, // TransferBuffer
write_length);
if (status) {
- dbg ("%s - ERROR %d", __FUNCTION__, status);
+ dbg ("%s - ERROR %d", __func__, status);
return status;
}
else
write_length = length;
- dbg ("%s - Page Write Addr = %x, length = %d", __FUNCTION__, start_address, write_length);
- usb_serial_debug_data(debug, &serial->serial->dev->dev, __FUNCTION__, write_length, buffer);
+ dbg ("%s - Page Write Addr = %x, length = %d", __func__, start_address, write_length);
+ usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, write_length, buffer);
/* Write next page */
be_start_address = cpu_to_be16 (start_address);
buffer, // TransferBuffer
write_length); // TransferBufferLength
if (status) {
- dev_err (&serial->serial->dev->dev, "%s - ERROR %d\n", __FUNCTION__, status);
+ dev_err (&serial->serial->dev->dev, "%s - ERROR %d\n", __func__, status);
return status;
}
oedb = kmalloc (sizeof (* oedb), GFP_KERNEL);
if (!oedb) {
- dev_err (&port->port->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err (&port->port->dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
if (status)
goto exit_is_tx_active;
- dbg ("%s - XByteCount 0x%X", __FUNCTION__, oedb->XByteCount);
+ dbg ("%s - XByteCount 0x%X", __func__, oedb->XByteCount);
/* and the LSR */
status = TIReadRam (port->port->serial->dev,
if (status)
goto exit_is_tx_active;
- dbg ("%s - LSR = 0x%X", __FUNCTION__, *lsr);
+ dbg ("%s - LSR = 0x%X", __func__, *lsr);
/* If either buffer has data or we are transmitting then return TRUE */
if ((oedb->XByteCount & 0x80 ) != 0 )
/* We return Not Active if we get any kind of error */
exit_is_tx_active:
- dbg ("%s - return %d", __FUNCTION__, bytes_left );
+ dbg ("%s - return %d", __func__, bytes_left );
kfree(lsr);
kfree(oedb);
// we want. However, we just support one config at this point,
// configuration # 1, which is Config Descriptor 0.
- dbg ("%s - Number of Interfaces = %d", __FUNCTION__, dev->config->desc.bNumInterfaces);
- dbg ("%s - MAX Power = %d", __FUNCTION__, dev->config->desc.bMaxPower*2);
+ dbg ("%s - Number of Interfaces = %d", __func__, dev->config->desc.bNumInterfaces);
+ dbg ("%s - MAX Power = %d", __func__, dev->config->desc.bMaxPower*2);
if (dev->config->desc.bNumInterfaces != 1) {
- dev_err (&dev->dev, "%s - bNumInterfaces is not 1, ERROR!\n", __FUNCTION__);
+ dev_err (&dev->dev, "%s - bNumInterfaces is not 1, ERROR!\n", __func__);
return -ENODEV;
}
cs = (__u8)(cs + buffer[i]);
}
if (cs != rom_desc->CheckSum) {
- dbg ("%s - Mismatch %x - %x", __FUNCTION__, rom_desc->CheckSum, cs);
+ dbg ("%s - Mismatch %x - %x", __func__, rom_desc->CheckSum, cs);
return -EINVAL;
}
return 0;
rom_desc = kmalloc (sizeof (*rom_desc), GFP_KERNEL);
if (!rom_desc) {
- dev_err (dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
buffer = kmalloc (TI_MAX_I2C_SIZE, GFP_KERNEL);
if (!buffer) {
- dev_err (dev, "%s - out of memory when allocating buffer\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory when allocating buffer\n", __func__);
kfree (rom_desc);
return -ENOMEM;
}
goto ExitTiValidateI2cImage;
if (*buffer != UMP5152 && *buffer != UMP3410) {
- dev_err (dev, "%s - invalid buffer signature\n", __FUNCTION__);
+ dev_err (dev, "%s - invalid buffer signature\n", __func__);
status = -ENODEV;
goto ExitTiValidateI2cImage;
}
if ((start_address + sizeof(struct ti_i2c_desc) + rom_desc->Size) > TI_MAX_I2C_SIZE) {
status = -ENODEV;
- dbg ("%s - structure too big, erroring out.", __FUNCTION__);
+ dbg ("%s - structure too big, erroring out.", __func__);
break;
}
- dbg ("%s Type = 0x%x", __FUNCTION__, rom_desc->Type);
+ dbg ("%s Type = 0x%x", __func__, rom_desc->Type);
// Skip type 2 record
ttype = rom_desc->Type & 0x0f;
rom_desc = kmalloc (sizeof (*rom_desc), GFP_KERNEL);
if (!rom_desc) {
- dev_err (&serial->serial->dev->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err (&serial->serial->dev->dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
start_address = TIGetDescriptorAddress (serial, I2C_DESC_TYPE_ION, rom_desc);
if (!start_address) {
- dbg ("%s - Edge Descriptor not found in I2C", __FUNCTION__);
+ dbg ("%s - Edge Descriptor not found in I2C", __func__);
status = -ENODEV;
goto exit;
}
status = ValidChecksum(rom_desc, buffer);
desc = (struct edge_ti_manuf_descriptor *)buffer;
- dbg ( "%s - IonConfig 0x%x", __FUNCTION__, desc->IonConfig );
- dbg ( "%s - Version %d", __FUNCTION__, desc->Version );
- dbg ( "%s - Cpu/Board 0x%x", __FUNCTION__, desc->CpuRev_BoardRev );
- dbg ( "%s - NumPorts %d", __FUNCTION__, desc->NumPorts );
- dbg ( "%s - NumVirtualPorts %d", __FUNCTION__, desc->NumVirtualPorts );
- dbg ( "%s - TotalPorts %d", __FUNCTION__, desc->TotalPorts );
+ dbg ( "%s - IonConfig 0x%x", __func__, desc->IonConfig );
+ dbg ( "%s - Version %d", __func__, desc->Version );
+ dbg ( "%s - Cpu/Board 0x%x", __func__, desc->CpuRev_BoardRev );
+ dbg ( "%s - NumPorts %d", __func__, desc->NumPorts );
+ dbg ( "%s - NumVirtualPorts %d", __func__, desc->NumVirtualPorts );
+ dbg ( "%s - TotalPorts %d", __func__, desc->TotalPorts );
exit:
kfree (rom_desc);
buffer = kmalloc (buffer_size, GFP_KERNEL);
if (!buffer) {
- dev_err (dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
&data, // TransferBuffer
0x01); // TransferBufferLength
if (status)
- dbg ("%s - read 2 status error = %d", __FUNCTION__, status);
+ dbg ("%s - read 2 status error = %d", __func__, status);
else
- dbg ("%s - read 2 data = 0x%x", __FUNCTION__, data);
+ dbg ("%s - read 2 data = 0x%x", __func__, data);
if ((!status) && (data == UMP5152 || data == UMP3410)) {
- dbg ("%s - ROM_TYPE_II", __FUNCTION__);
+ dbg ("%s - ROM_TYPE_II", __func__);
serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
return 0;
}
&data, // TransferBuffer
0x01); // TransferBufferLength
if (status)
- dbg ("%s - read 3 status error = %d", __FUNCTION__, status);
+ dbg ("%s - read 3 status error = %d", __func__, status);
else
- dbg ("%s - read 2 data = 0x%x", __FUNCTION__, data);
+ dbg ("%s - read 2 data = 0x%x", __func__, data);
if ((!status) && (data == UMP5152 || data == UMP3410)) {
- dbg ("%s - ROM_TYPE_III", __FUNCTION__);
+ dbg ("%s - ROM_TYPE_III", __func__);
serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_III;
return 0;
}
- dbg ("%s - Unknown", __FUNCTION__);
+ dbg ("%s - Unknown", __func__);
serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
return -ENODEV;
}
interface = &serial->serial->interface->cur_altsetting->desc;
if (!interface) {
- dev_err (dev, "%s - no interface set, error!\n", __FUNCTION__);
+ dev_err (dev, "%s - no interface set, error!\n", __func__);
return -ENODEV;
}
*/
ti_manuf_desc = kmalloc (sizeof (*ti_manuf_desc), GFP_KERNEL);
if (!ti_manuf_desc) {
- dev_err (dev, "%s - out of memory.\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory.\n", __func__);
return -ENOMEM;
}
status = TIReadManufDescriptor (serial, (__u8 *)ti_manuf_desc);
// Check version number of ION descriptor
if (!ignore_cpu_rev && TI_GET_CPU_REVISION(ti_manuf_desc->CpuRev_BoardRev) < 2) {
- dbg ( "%s - Wrong CPU Rev %d (Must be 2)", __FUNCTION__,
+ dbg ( "%s - Wrong CPU Rev %d (Must be 2)", __func__,
TI_GET_CPU_REVISION(ti_manuf_desc->CpuRev_BoardRev));
kfree (ti_manuf_desc);
return -EINVAL;
rom_desc = kmalloc (sizeof (*rom_desc), GFP_KERNEL);
if (!rom_desc) {
- dev_err (dev, "%s - out of memory.\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory.\n", __func__);
kfree (ti_manuf_desc);
return -ENOMEM;
}
struct ti_i2c_firmware_rec *firmware_version;
__u8 record;
- dbg ("%s - Found Type FIRMWARE (Type 2) record", __FUNCTION__);
+ dbg ("%s - Found Type FIRMWARE (Type 2) record", __func__);
firmware_version = kmalloc (sizeof (*firmware_version), GFP_KERNEL);
if (!firmware_version) {
- dev_err (dev, "%s - out of memory.\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory.\n", __func__);
kfree (rom_desc);
kfree (ti_manuf_desc);
return -ENOMEM;
(OperationalCodeImageVersion.MinorVersion);
dbg ("%s - >>>Firmware Versions Device %d.%d Driver %d.%d",
- __FUNCTION__,
+ __func__,
firmware_version->Ver_Major,
firmware_version->Ver_Minor,
OperationalCodeImageVersion.MajorVersion,
// Check if we have an old version in the I2C and update if necessary
if (download_cur_ver != download_new_ver) {
dbg ("%s - Update I2C Download from %d.%d to %d.%d",
- __FUNCTION__,
+ __func__,
firmware_version->Ver_Major,
firmware_version->Ver_Minor,
OperationalCodeImageVersion.MajorVersion,
}
if (record != I2C_DESC_TYPE_FIRMWARE_BLANK) {
- dev_err (dev, "%s - error resetting device\n", __FUNCTION__);
+ dev_err (dev, "%s - error resetting device\n", __func__);
kfree (firmware_version);
kfree (rom_desc);
kfree (ti_manuf_desc);
return -ENODEV;
}
- dbg ("%s - HARDWARE RESET", __FUNCTION__);
+ dbg ("%s - HARDWARE RESET", __func__);
// Reset UMP -- Back to BOOT MODE
status = TISendVendorRequestSync (serial->serial->dev,
NULL, // TransferBuffer
0); // TransferBufferLength
- dbg ( "%s - HARDWARE RESET return %d", __FUNCTION__, status);
+ dbg ( "%s - HARDWARE RESET return %d", __func__, status);
/* return an error on purpose. */
kfree (firmware_version);
header = kmalloc (HEADER_SIZE, GFP_KERNEL);
if (!header) {
- dev_err (dev, "%s - out of memory.\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory.\n", __func__);
kfree (rom_desc);
kfree (ti_manuf_desc);
return -ENOMEM;
vheader = kmalloc (HEADER_SIZE, GFP_KERNEL);
if (!vheader) {
- dev_err (dev, "%s - out of memory.\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory.\n", __func__);
kfree (header);
kfree (rom_desc);
kfree (ti_manuf_desc);
return -ENOMEM;
}
- dbg ("%s - Found Type BLANK FIRMWARE (Type F2) record", __FUNCTION__);
+ dbg ("%s - Found Type BLANK FIRMWARE (Type F2) record", __func__);
// In order to update the I2C firmware we must change the type 2 record to type 0xF2.
// This will force the UMP to come up in Boot Mode. Then while in boot mode, the driver
vheader);
if (status) {
- dbg ("%s - can't read header back", __FUNCTION__);
+ dbg ("%s - can't read header back", __func__);
kfree (vheader);
kfree (header);
kfree (rom_desc);
return status;
}
if (memcmp(vheader, header, HEADER_SIZE)) {
- dbg ("%s - write download record failed", __FUNCTION__);
+ dbg ("%s - write download record failed", __func__);
kfree (vheader);
kfree (header);
kfree (rom_desc);
kfree (vheader);
kfree (header);
- dbg ("%s - Start firmware update", __FUNCTION__);
+ dbg ("%s - Start firmware update", __func__);
// Tell firmware to copy download image into I2C
status = TISendVendorRequestSync (serial->serial->dev,
NULL, // TransferBuffer
0); // TransferBufferLength
- dbg ("%s - Update complete 0x%x", __FUNCTION__, status);
+ dbg ("%s - Update complete 0x%x", __func__, status);
if (status) {
- dev_err (dev, "%s - UMPC_COPY_DNLD_TO_I2C failed\n", __FUNCTION__);
+ dev_err (dev, "%s - UMPC_COPY_DNLD_TO_I2C failed\n", __func__);
kfree (rom_desc);
kfree (ti_manuf_desc);
return status;
return status;
if (le16_to_cpu(serial->serial->dev->descriptor.idVendor) != USB_VENDOR_ID_ION) {
- dbg ("%s - VID = 0x%x", __FUNCTION__,
+ dbg ("%s - VID = 0x%x", __func__,
le16_to_cpu(serial->serial->dev->descriptor.idVendor));
serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
goto StayInBootMode;
// Registry variable set?
if (TIStayInBootMode) {
- dbg ("%s - TIStayInBootMode", __FUNCTION__);
+ dbg ("%s - TIStayInBootMode", __func__);
goto StayInBootMode;
}
*/
ti_manuf_desc = kmalloc (sizeof (*ti_manuf_desc), GFP_KERNEL);
if (!ti_manuf_desc) {
- dev_err (dev, "%s - out of memory.\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory.\n", __func__);
return -ENOMEM;
}
status = TIReadManufDescriptor (serial, (__u8 *)ti_manuf_desc);
// Check for version 2
if (!ignore_cpu_rev && TI_GET_CPU_REVISION(ti_manuf_desc->CpuRev_BoardRev) < 2) {
- dbg ("%s - Wrong CPU Rev %d (Must be 2)", __FUNCTION__,
+ dbg ("%s - Wrong CPU Rev %d (Must be 2)", __func__,
TI_GET_CPU_REVISION(ti_manuf_desc->CpuRev_BoardRev));
kfree (ti_manuf_desc);
goto StayInBootMode;
buffer_size = (((1024 * 16) - 512) + sizeof(struct ti_i2c_image_header));
buffer = kmalloc (buffer_size, GFP_KERNEL);
if (!buffer) {
- dev_err (dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err (dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
header->CheckSum = cs;
// Download the operational code
- dbg ("%s - Downloading operational code image (TI UMP)", __FUNCTION__);
+ dbg ("%s - Downloading operational code image (TI UMP)", __func__);
status = TIDownloadCodeImage (serial, buffer, buffer_size);
kfree (buffer);
if (status) {
- dbg ("%s - Error downloading operational code image", __FUNCTION__);
+ dbg ("%s - Error downloading operational code image", __func__);
return status;
}
// Device will reboot
serial->product_info.TiMode = TI_MODE_TRANSITIONING;
- dbg ("%s - Download successful -- Device rebooting...", __FUNCTION__);
+ dbg ("%s - Download successful -- Device rebooting...", __func__);
/* return an error on purpose */
return -ENODEV;
{
int port_number = port->port->number - port->port->serial->minor;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
port->shadow_mcr |= MCR_DTR;
return TIWriteCommandSync (port->port->serial->dev,
{
int port_number = port->port->number - port->port->serial->minor;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
port->shadow_mcr &= ~MCR_DTR;
return TIWriteCommandSync (port->port->serial->dev,
{
int port_number = port->port->number - port->port->serial->minor;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
port->shadow_mcr |= MCR_RTS;
return TIWriteCommandSync (port->port->serial->dev,
{
int port_number = port->port->number - port->port->serial->minor;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
port->shadow_mcr &= ~MCR_RTS;
return TIWriteCommandSync (port->port->serial->dev,
{
int port_number = port->port->number - port->port->serial->minor;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
return TIWriteCommandSync (port->port->serial->dev,
UMPC_SET_CLR_LOOPBACK,
{
int port_number = port->port->number - port->port->serial->minor;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
return TIWriteCommandSync (port->port->serial->dev,
UMPC_SET_CLR_LOOPBACK,
{
int port_number = port->port->number - port->port->serial->minor;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
return TIWriteCommandSync (port->port->serial->dev,
UMPC_SET_CLR_BREAK,
{
int port_number = port->port->number - port->port->serial->minor;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
return TIWriteCommandSync (port->port->serial->dev,
UMPC_SET_CLR_BREAK,
{
int status = 0;
- dbg ("%s - %x", __FUNCTION__, mcr);
+ dbg ("%s - %x", __func__, mcr);
if (mcr & MCR_DTR)
status = TISetDtr (port);
struct async_icount *icount;
struct tty_struct *tty;
- dbg ("%s - %02x", __FUNCTION__, msr);
+ dbg ("%s - %02x", __func__, msr);
if (msr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) {
icount = &edge_port->icount;
struct async_icount *icount;
__u8 new_lsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK));
- dbg ("%s - %02x", __FUNCTION__, new_lsr);
+ dbg ("%s - %02x", __func__, new_lsr);
edge_port->shadow_lsr = lsr;
__u8 msr;
int status = urb->status;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
switch (status) {
case 0:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
default:
dev_err(&urb->dev->dev, "%s - nonzero urb status received: "
- "%d\n", __FUNCTION__, status);
+ "%d\n", __func__, status);
goto exit;
}
if (!length) {
- dbg ("%s - no data in urb", __FUNCTION__);
+ dbg ("%s - no data in urb", __func__);
goto exit;
}
- usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __FUNCTION__, length, data);
+ usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, __func__, length, data);
if (length != 2) {
- dbg ("%s - expecting packet of size 2, got %d", __FUNCTION__, length);
+ dbg ("%s - expecting packet of size 2, got %d", __func__, length);
goto exit;
}
port_number = TIUMP_GET_PORT_FROM_CODE (data[0]);
function = TIUMP_GET_FUNC_FROM_CODE (data[0]);
dbg ("%s - port_number %d, function %d, info 0x%x",
- __FUNCTION__, port_number, function, data[1]);
+ __func__, port_number, function, data[1]);
port = edge_serial->serial->port[port_number];
edge_port = usb_get_serial_port_data(port);
if (!edge_port) {
- dbg ("%s - edge_port not found", __FUNCTION__);
+ dbg ("%s - edge_port not found", __func__);
return;
}
switch (function) {
if (lsr & UMP_UART_LSR_DATA_MASK) {
/* Save the LSR event for bulk read completion routine */
dbg ("%s - LSR Event Port %u LSR Status = %02x",
- __FUNCTION__, port_number, lsr);
+ __func__, port_number, lsr);
edge_port->lsr_event = 1;
edge_port->lsr_mask = lsr;
} else {
dbg ("%s - ===== Port %d LSR Status = %02x ======",
- __FUNCTION__, port_number, lsr);
+ __func__, port_number, lsr);
handle_new_lsr (edge_port, 0, lsr, 0);
}
break;
/* Copy MSR from UMP */
msr = data[1];
dbg ("%s - ===== Port %u MSR Status = %02x ======\n",
- __FUNCTION__, port_number, msr);
+ __func__, port_number, msr);
handle_new_msr (edge_port, msr);
break;
default:
dev_err (&urb->dev->dev, "%s - Unknown Interrupt code from UMP %x\n",
- __FUNCTION__, data[1]);
+ __func__, data[1]);
break;
}
retval = usb_submit_urb (urb, GFP_ATOMIC);
if (retval)
dev_err (&urb->dev->dev, "%s - usb_submit_urb failed with result %d\n",
- __FUNCTION__, retval);
+ __func__, retval);
}
static void edge_bulk_in_callback (struct urb *urb)
int port_number;
int status = urb->status;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
switch (status) {
case 0:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
default:
dev_err (&urb->dev->dev,"%s - nonzero read bulk status received: %d\n",
- __FUNCTION__, status);
+ __func__, status);
}
if (status == -EPIPE)
goto exit;
if (status) {
- dev_err(&urb->dev->dev,"%s - stopping read!\n", __FUNCTION__);
+ dev_err(&urb->dev->dev,"%s - stopping read!\n", __func__);
return;
}
if (edge_port->lsr_event) {
edge_port->lsr_event = 0;
dbg ("%s ===== Port %u LSR Status = %02x, Data = %02x ======",
- __FUNCTION__, port_number, edge_port->lsr_mask, *data);
+ __func__, port_number, edge_port->lsr_mask, *data);
handle_new_lsr (edge_port, 1, edge_port->lsr_mask, *data);
/* Adjust buffer length/pointer */
--urb->actual_length;
tty = edge_port->port->tty;
if (tty && urb->actual_length) {
- usb_serial_debug_data(debug, &edge_port->port->dev, __FUNCTION__, urb->actual_length, data);
+ usb_serial_debug_data(debug, &edge_port->port->dev, __func__, urb->actual_length, data);
if (edge_port->close_pending) {
- dbg ("%s - close is pending, dropping data on the floor.", __FUNCTION__);
+ dbg ("%s - close is pending, dropping data on the floor.", __func__);
} else {
edge_tty_recv(&edge_port->port->dev, tty, data, urb->actual_length);
}
spin_unlock(&edge_port->ep_lock);
if (retval)
dev_err (&urb->dev->dev, "%s - usb_submit_urb failed with result %d\n",
- __FUNCTION__, retval);
+ __func__, retval);
}
static void edge_tty_recv(struct device *dev, struct tty_struct *tty, unsigned char *data, int length)
cnt = tty_buffer_request_room(tty, length);
if (cnt < length) {
dev_err(dev, "%s - dropping data, %d bytes lost\n",
- __FUNCTION__, length - cnt);
+ __func__, length - cnt);
if(cnt == 0)
break;
}
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
int status = urb->status;
- dbg ("%s - port %d", __FUNCTION__, port->number);
+ dbg ("%s - port %d", __func__, port->number);
edge_port->ep_write_urb_in_use = 0;
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
default:
dev_err(&urb->dev->dev, "%s - nonzero write bulk status "
- "received: %d\n", __FUNCTION__, status);
+ "received: %d\n", __func__, status);
}
/* send any buffered data */
u16 open_settings;
u8 transaction_timeout;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return -ENODEV;
}
dbg ("%s - port_number = %d, uart_base = %04x, dma_address = %04x",
- __FUNCTION__, port_number, edge_port->uart_base, edge_port->dma_address);
+ __func__, port_number, edge_port->uart_base, edge_port->dma_address);
dev = port->serial->dev;
status = TIClearLoopBack (edge_port);
if (status) {
dev_err(&port->dev,"%s - cannot send clear loopback command, %d\n",
- __FUNCTION__, status);
+ __func__, status);
return status;
}
UMP_PIPE_TRANS_TIMEOUT_ENA |
(transaction_timeout << 2));
- dbg ("%s - Sending UMPC_OPEN_PORT", __FUNCTION__);
+ dbg ("%s - Sending UMPC_OPEN_PORT", __func__);
/* Tell TI to open and start the port */
status = TIWriteCommandSync (dev,
NULL,
0);
if (status) {
- dev_err(&port->dev,"%s - cannot send open command, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev,"%s - cannot send open command, %d\n", __func__, status);
return status;
}
NULL,
0);
if (status) {
- dev_err(&port->dev,"%s - cannot send start DMA command, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev,"%s - cannot send start DMA command, %d\n", __func__, status);
return status;
}
/* Clear TX and RX buffers in UMP */
status = TIPurgeDataSync (port, UMP_PORT_DIR_OUT | UMP_PORT_DIR_IN);
if (status) {
- dev_err(&port->dev,"%s - cannot send clear buffers command, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev,"%s - cannot send clear buffers command, %d\n", __func__, status);
return status;
}
&edge_port->shadow_msr, // TransferBuffer
1); // TransferBufferLength
if (status) {
- dev_err(&port->dev,"%s - cannot send read MSR command, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev,"%s - cannot send read MSR command, %d\n", __func__, status);
return status;
}
/* we are the first port to be opened, let's post the interrupt urb */
urb = edge_serial->serial->port[0]->interrupt_in_urb;
if (!urb) {
- dev_err (&port->dev, "%s - no interrupt urb present, exiting\n", __FUNCTION__);
+ dev_err (&port->dev, "%s - no interrupt urb present, exiting\n", __func__);
status = -EINVAL;
goto release_es_lock;
}
urb->dev = dev;
status = usb_submit_urb (urb, GFP_KERNEL);
if (status) {
- dev_err (&port->dev, "%s - usb_submit_urb failed with value %d\n", __FUNCTION__, status);
+ dev_err (&port->dev, "%s - usb_submit_urb failed with value %d\n", __func__, status);
goto release_es_lock;
}
}
/* start up our bulk read urb */
urb = port->read_urb;
if (!urb) {
- dev_err (&port->dev, "%s - no read urb present, exiting\n", __FUNCTION__);
+ dev_err (&port->dev, "%s - no read urb present, exiting\n", __func__);
status = -EINVAL;
goto unlink_int_urb;
}
urb->dev = dev;
status = usb_submit_urb (urb, GFP_KERNEL);
if (status) {
- dev_err (&port->dev, "%s - read bulk usb_submit_urb failed with value %d\n", __FUNCTION__, status);
+ dev_err (&port->dev, "%s - read bulk usb_submit_urb failed with value %d\n", __func__, status);
goto unlink_int_urb;
}
++edge_serial->num_ports_open;
- dbg("%s - exited", __FUNCTION__);
+ dbg("%s - exited", __func__);
goto release_es_lock;
int port_number;
int status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
edge_serial = usb_get_serial_data(port->serial);
edge_port = usb_get_serial_port_data(port);
/* assuming we can still talk to the device,
* send a close port command to it */
- dbg("%s - send umpc_close_port", __FUNCTION__);
+ dbg("%s - send umpc_close_port", __func__);
port_number = port->number - port->serial->minor;
status = TIWriteCommandSync (port->serial->dev,
UMPC_CLOSE_PORT,
mutex_unlock(&edge_serial->es_lock);
edge_port->close_pending = 0;
- dbg("%s - exited", __FUNCTION__);
+ dbg("%s - exited", __func__);
}
static int edge_write (struct usb_serial_port *port, const unsigned char *data, int count)
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (count == 0) {
- dbg("%s - write request of 0 bytes", __FUNCTION__);
+ dbg("%s - write request of 0 bytes", __func__);
return 0;
}
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&edge_port->ep_lock, flags);
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, port->write_urb->transfer_buffer);
+ usb_serial_debug_data(debug, &port->dev, __func__, count, port->write_urb->transfer_buffer);
/* set up our urb */
usb_fill_bulk_urb (port->write_urb, port->serial->dev,
/* send the data out the bulk port */
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
- dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __func__, result);
edge_port->ep_write_urb_in_use = 0;
// TODO: reschedule edge_send
} else {
int room = 0;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return -ENODEV;
room = edge_buf_space_avail(edge_port->ep_out_buf);
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
- dbg("%s - returns %d", __FUNCTION__, room);
+ dbg("%s - returns %d", __func__, room);
return room;
}
int chars = 0;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return -ENODEV;
chars = edge_buf_data_avail(edge_port->ep_out_buf);
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
- dbg ("%s - returns %d", __FUNCTION__, chars);
+ dbg ("%s - returns %d", __func__, chars);
return chars;
}
struct tty_struct *tty;
int status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return;
tty = port->tty;
if (!tty) {
- dbg ("%s - no tty available", __FUNCTION__);
+ dbg ("%s - no tty available", __func__);
return;
}
unsigned char stop_char = STOP_CHAR(tty);
status = edge_write (port, &stop_char, 1);
if (status <= 0) {
- dev_err(&port->dev, "%s - failed to write stop character, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - failed to write stop character, %d\n", __func__, status);
}
}
struct tty_struct *tty;
int status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return;
tty = port->tty;
if (!tty) {
- dbg ("%s - no tty available", __FUNCTION__);
+ dbg ("%s - no tty available", __func__);
return;
}
unsigned char start_char = START_CHAR(tty);
status = edge_write (port, &start_char, 1);
if (status <= 0) {
- dev_err(&port->dev, "%s - failed to write start character, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - failed to write start character, %d\n", __func__, status);
}
}
if (C_CRTSCTS(tty)) {
status = restart_read(edge_port);
if (status)
- dev_err(&port->dev, "%s - read bulk usb_submit_urb failed with value %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - read bulk usb_submit_urb failed with value %d\n", __func__, status);
}
}
int status;
int port_number = edge_port->port->number - edge_port->port->serial->minor;
- dbg("%s - port %d", __FUNCTION__, edge_port->port->number);
+ dbg("%s - port %d", __func__, edge_port->port->number);
tty = edge_port->port->tty;
config = kmalloc (sizeof (*config), GFP_KERNEL);
if (!config) {
- dev_err (&edge_port->port->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err (&edge_port->port->dev, "%s - out of memory\n", __func__);
return;
}
switch (cflag & CSIZE) {
case CS5:
config->bDataBits = UMP_UART_CHAR5BITS;
- dbg ("%s - data bits = 5", __FUNCTION__);
+ dbg ("%s - data bits = 5", __func__);
break;
case CS6:
config->bDataBits = UMP_UART_CHAR6BITS;
- dbg ("%s - data bits = 6", __FUNCTION__);
+ dbg ("%s - data bits = 6", __func__);
break;
case CS7:
config->bDataBits = UMP_UART_CHAR7BITS;
- dbg ("%s - data bits = 7", __FUNCTION__);
+ dbg ("%s - data bits = 7", __func__);
break;
default:
case CS8:
config->bDataBits = UMP_UART_CHAR8BITS;
- dbg ("%s - data bits = 8", __FUNCTION__);
+ dbg ("%s - data bits = 8", __func__);
break;
}
if (cflag & PARODD) {
config->wFlags |= UMP_MASK_UART_FLAGS_PARITY;
config->bParity = UMP_UART_ODDPARITY;
- dbg("%s - parity = odd", __FUNCTION__);
+ dbg("%s - parity = odd", __func__);
} else {
config->wFlags |= UMP_MASK_UART_FLAGS_PARITY;
config->bParity = UMP_UART_EVENPARITY;
- dbg("%s - parity = even", __FUNCTION__);
+ dbg("%s - parity = even", __func__);
}
} else {
config->bParity = UMP_UART_NOPARITY;
- dbg("%s - parity = none", __FUNCTION__);
+ dbg("%s - parity = none", __func__);
}
if (cflag & CSTOPB) {
config->bStopBits = UMP_UART_STOPBIT2;
- dbg("%s - stop bits = 2", __FUNCTION__);
+ dbg("%s - stop bits = 2", __func__);
} else {
config->bStopBits = UMP_UART_STOPBIT1;
- dbg("%s - stop bits = 1", __FUNCTION__);
+ dbg("%s - stop bits = 1", __func__);
}
/* figure out the flow control settings */
if (cflag & CRTSCTS) {
config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X_CTS_FLOW;
config->wFlags |= UMP_MASK_UART_FLAGS_RTS_FLOW;
- dbg("%s - RTS/CTS is enabled", __FUNCTION__);
+ dbg("%s - RTS/CTS is enabled", __func__);
} else {
- dbg("%s - RTS/CTS is disabled", __FUNCTION__);
+ dbg("%s - RTS/CTS is disabled", __func__);
tty->hw_stopped = 0;
restart_read(edge_port);
}
if (I_IXOFF(tty)) {
config->wFlags |= UMP_MASK_UART_FLAGS_IN_X;
dbg ("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
- __FUNCTION__, config->cXon, config->cXoff);
+ __func__, config->cXon, config->cXoff);
} else {
- dbg ("%s - INBOUND XON/XOFF is disabled", __FUNCTION__);
+ dbg ("%s - INBOUND XON/XOFF is disabled", __func__);
}
/* if we are implementing OUTBOUND XON/XOFF */
if (I_IXON(tty)) {
config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X;
dbg ("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x",
- __FUNCTION__, config->cXon, config->cXoff);
+ __func__, config->cXon, config->cXoff);
} else {
- dbg ("%s - OUTBOUND XON/XOFF is disabled", __FUNCTION__);
+ dbg ("%s - OUTBOUND XON/XOFF is disabled", __func__);
}
}
/* FIXME: Recompute actual baud from divisor here */
- dbg ("%s - baud rate = %d, wBaudRate = %d", __FUNCTION__, baud, config->wBaudRate);
+ dbg ("%s - baud rate = %d, wBaudRate = %d", __func__, baud, config->wBaudRate);
dbg ("wBaudRate: %d", (int)(461550L / config->wBaudRate));
dbg ("wFlags: 0x%x", config->wFlags);
sizeof(*config));
if (status) {
dbg ("%s - error %d when trying to write config to device",
- __FUNCTION__, status);
+ __func__, status);
}
kfree (config);
cflag = tty->termios->c_cflag;
- dbg("%s - clfag %08x iflag %08x", __FUNCTION__,
+ dbg("%s - clfag %08x iflag %08x", __func__,
tty->termios->c_cflag, tty->termios->c_iflag);
- dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__,
+ dbg("%s - old clfag %08x old iflag %08x", __func__,
old_termios->c_cflag, old_termios->c_iflag);
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (edge_port == NULL)
return;
unsigned int mcr;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&edge_port->ep_lock, flags);
mcr = edge_port->shadow_mcr;
unsigned int mcr;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&edge_port->ep_lock, flags);
| ((msr & EDGEPORT_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */
- dbg("%s -- %x", __FUNCTION__, result);
+ dbg("%s -- %x", __func__, result);
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
return result;
struct async_icount cnow;
struct async_icount cprev;
- dbg("%s - port %d, cmd = 0x%x", __FUNCTION__, port->number, cmd);
+ dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
switch (cmd) {
case TIOCINQ:
- dbg("%s - (%d) TIOCINQ", __FUNCTION__, port->number);
+ dbg("%s - (%d) TIOCINQ", __func__, port->number);
// return get_number_bytes_avail(edge_port, (unsigned int *) arg);
break;
case TIOCSERGETLSR:
- dbg("%s - (%d) TIOCSERGETLSR", __FUNCTION__, port->number);
+ dbg("%s - (%d) TIOCSERGETLSR", __func__, port->number);
// return get_lsr_info(edge_port, (unsigned int *) arg);
break;
case TIOCGSERIAL:
- dbg("%s - (%d) TIOCGSERIAL", __FUNCTION__, port->number);
+ dbg("%s - (%d) TIOCGSERIAL", __func__, port->number);
return get_serial_info(edge_port, (struct serial_struct __user *) arg);
break;
case TIOCSSERIAL:
- dbg("%s - (%d) TIOCSSERIAL", __FUNCTION__, port->number);
+ dbg("%s - (%d) TIOCSSERIAL", __func__, port->number);
break;
case TIOCMIWAIT:
- dbg("%s - (%d) TIOCMIWAIT", __FUNCTION__, port->number);
+ dbg("%s - (%d) TIOCMIWAIT", __func__, port->number);
cprev = edge_port->icount;
while (1) {
interruptible_sleep_on(&edge_port->delta_msr_wait);
break;
case TIOCGICOUNT:
- dbg ("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__,
+ dbg ("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
port->number, edge_port->icount.rx, edge_port->icount.tx);
if (copy_to_user((void __user *)arg, &edge_port->icount, sizeof(edge_port->icount)))
return -EFAULT;
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
int status;
- dbg ("%s - state = %d", __FUNCTION__, break_state);
+ dbg ("%s - state = %d", __func__, break_state);
/* chase the port close */
TIChasePort (edge_port, 0, 0);
}
if (status) {
dbg ("%s - error %d sending break set/clear command.",
- __FUNCTION__, status);
+ __func__, status);
}
}
/* create our private serial structure */
edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
if (edge_serial == NULL) {
- dev_err(&serial->dev->dev, "%s - Out of memory\n", __FUNCTION__);
+ dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
return -ENOMEM;
}
mutex_init(&edge_serial->es_lock);
for (i = 0; i < serial->num_ports; ++i) {
edge_port = kzalloc(sizeof(struct edgeport_port), GFP_KERNEL);
if (edge_port == NULL) {
- dev_err(&serial->dev->dev, "%s - Out of memory\n", __FUNCTION__);
+ dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
goto cleanup;
}
spin_lock_init(&edge_port->ep_lock);
edge_port->ep_out_buf = edge_buf_alloc(EDGE_OUT_BUF_SIZE);
if (edge_port->ep_out_buf == NULL) {
- dev_err(&serial->dev->dev, "%s - Out of memory\n", __FUNCTION__);
+ dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
kfree(edge_port);
goto cleanup;
}
int i;
struct edgeport_port *edge_port;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
for (i = 0; i < serial->num_ports; ++i) {
edge_port = usb_get_serial_port_data(serial->port[i]);
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
unsigned int v = simple_strtoul(valbuf, NULL, 0);
- dbg("%s: setting uart_mode = %d", __FUNCTION__, v);
+ dbg("%s: setting uart_mode = %d", __func__, v);
if (v < 256)
edge_port->bUartMode = v;
else
- dev_err(dev, "%s - uart_mode %d is invalid\n", __FUNCTION__, v);
+ dev_err(dev, "%s - uart_mode %d is invalid\n", __func__, v);
return count;
}
int i, result = 0;
int retries = connect_retries;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
bytes_in = 0;
bytes_out = 0;
priv = kmalloc(sizeof(struct ipaq_private), GFP_KERNEL);
if (priv == NULL) {
- err("%s - Out of memory", __FUNCTION__);
+ err("%s - Out of memory", __func__);
return -ENOMEM;
}
usb_set_serial_port_data(port, priv);
}
if (!retries && result) {
- err("%s - failed doing control urb, error %d", __FUNCTION__,
+ err("%s - failed doing control urb, error %d", __func__,
result);
goto error;
}
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result) {
- err("%s - failed submitting read urb, error %d", __FUNCTION__, result);
+ err("%s - failed submitting read urb, error %d", __func__, result);
goto error;
}
enomem:
result = -ENOMEM;
- err("%s - Out of memory", __FUNCTION__);
+ err("%s - Out of memory", __func__);
error:
ipaq_destroy_lists(port);
kfree(priv);
{
struct ipaq_private *priv = usb_get_serial_port_data(port);
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/*
* shut down bulk read and write
int result;
int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (status) {
dbg("%s - nonzero read bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
}
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+ usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
tty = port->tty;
if (tty && urb->actual_length) {
ipaq_read_bulk_callback, port);
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
+ err("%s - failed resubmitting read urb, error %d", __func__, result);
return;
}
int bytes_sent = 0;
int transfer_size;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
while (count > 0) {
transfer_size = min(count, PACKET_SIZE);
unsigned long flags;
if (priv->free_len <= 0) {
- dbg("%s - we're stuffed", __FUNCTION__);
+ dbg("%s - we're stuffed", __func__);
return -EAGAIN;
}
}
spin_unlock_irqrestore(&write_list_lock, flags);
if (pkt == NULL) {
- dbg("%s - we're stuffed", __FUNCTION__);
+ dbg("%s - we're stuffed", __func__);
return -EAGAIN;
}
memcpy(pkt->data, buf, count);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, pkt->data);
+ usb_serial_debug_data(debug, &port->dev, __func__, count, pkt->data);
pkt->len = count;
pkt->written = 0;
spin_unlock_irqrestore(&write_list_lock, flags);
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
- err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
+ err("%s - failed submitting write urb, error %d", __func__, result);
}
} else {
spin_unlock_irqrestore(&write_list_lock, flags);
int result;
int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (status) {
dbg("%s - nonzero write bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
}
spin_unlock_irqrestore(&write_list_lock, flags);
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
- err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
+ err("%s - failed submitting write urb, error %d", __func__, result);
}
} else {
priv->active = 0;
{
struct ipaq_private *priv = usb_get_serial_port_data(port);
- dbg("%s - freelen %d", __FUNCTION__, priv->free_len);
+ dbg("%s - freelen %d", __func__, priv->free_len);
return priv->free_len;
}
{
struct ipaq_private *priv = usb_get_serial_port_data(port);
- dbg("%s - queuelen %d", __FUNCTION__, priv->queue_len);
+ dbg("%s - queuelen %d", __func__, priv->queue_len);
return priv->queue_len;
}
static int ipaq_startup(struct usb_serial *serial)
{
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
err("active config #%d != 1 ??",
serial->dev->actconfig->desc.bConfigurationValue);
static void ipaq_shutdown(struct usb_serial *serial)
{
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
}
static int __init ipaq_init(void)
int result;
int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (status) {
dbg("%s - nonzero read bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
}
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+ usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
tty = port->tty;
if (tty && urb->actual_length) {
ipw_read_bulk_callback, port);
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
return;
}
u8 *buf_flow_init;
int result;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
buf_flow_init = kmemdup(buf_flow_static, 16, GFP_KERNEL);
if (!buf_flow_init)
/* --1: Tell the modem to initialize (we think) From sniffs this is always the
* first thing that gets sent to the modem during opening of the device */
- dbg("%s: Sending SIO_INIT (we guess)",__FUNCTION__);
+ dbg("%s: Sending SIO_INIT (we guess)",__func__);
result = usb_control_msg(dev, usb_sndctrlpipe(dev,0),
IPW_SIO_INIT,
USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
usb_clear_halt(dev, usb_sndbulkpipe(dev, port->bulk_out_endpointAddress));
/*--2: Start reading from the device */
- dbg("%s: setting up bulk read callback",__FUNCTION__);
+ dbg("%s: setting up bulk read callback",__func__);
usb_fill_bulk_urb(port->read_urb, dev,
usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
port->bulk_in_buffer,
ipw_read_bulk_callback, port);
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result < 0)
- dbg("%s - usb_submit_urb(read bulk) failed with status %d", __FUNCTION__, result);
+ dbg("%s - usb_submit_urb(read bulk) failed with status %d", __func__, result);
/*--3: Tell the modem to open the floodgates on the rx bulk channel */
- dbg("%s:asking modem for RxRead (RXBULK_ON)",__FUNCTION__);
+ dbg("%s:asking modem for RxRead (RXBULK_ON)",__func__);
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
IPW_SIO_RXCTL,
USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
dev_err(&port->dev, "Enabling bulk RxRead failed (error = %d)\n", result);
/*--4: setup the initial flowcontrol */
- dbg("%s:setting init flowcontrol (%s)",__FUNCTION__,buf_flow_init);
+ dbg("%s:setting init flowcontrol (%s)",__func__,buf_flow_init);
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
IPW_SIO_HANDFLOW,
USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
/*--5: raise the dtr */
- dbg("%s:raising dtr",__FUNCTION__);
+ dbg("%s:raising dtr",__func__);
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
IPW_SIO_SET_PIN,
USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
dev_err(&port->dev, "setting dtr failed (error = %d)\n", result);
/*--6: raise the rts */
- dbg("%s:raising rts",__FUNCTION__);
+ dbg("%s:raising rts",__func__);
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
IPW_SIO_SET_PIN,
USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
int result;
if (tty_hung_up_p(filp)) {
- dbg("%s: tty_hung_up_p ...", __FUNCTION__);
+ dbg("%s: tty_hung_up_p ...", __func__);
return;
}
/*--1: drop the dtr */
- dbg("%s:dropping dtr",__FUNCTION__);
+ dbg("%s:dropping dtr",__func__);
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
IPW_SIO_SET_PIN,
USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
dev_err(&port->dev, "dropping dtr failed (error = %d)\n", result);
/*--2: drop the rts */
- dbg("%s:dropping rts",__FUNCTION__);
+ dbg("%s:dropping rts",__func__);
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
IPW_PIN_CLRRTS,
/*--3: purge */
- dbg("%s:sending purge",__FUNCTION__);
+ dbg("%s:sending purge",__func__);
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
IPW_SIO_PURGE, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
0x03,
struct usb_serial_port *port = urb->context;
int status = urb->status;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
port->write_urb_busy = 0;
if (status)
dbg("%s - nonzero write bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
usb_serial_port_softint(port);
}
struct usb_device *dev = port->serial->dev;
int ret;
- dbg("%s: TOP: count=%d, in_interrupt=%ld", __FUNCTION__,
+ dbg("%s: TOP: count=%d, in_interrupt=%ld", __func__,
count, in_interrupt() );
if (count == 0) {
- dbg("%s - write request of 0 bytes", __FUNCTION__);
+ dbg("%s - write request of 0 bytes", __func__);
return 0;
}
spin_lock_bh(&port->lock);
if (port->write_urb_busy) {
spin_unlock_bh(&port->lock);
- dbg("%s - already writing", __FUNCTION__);
+ dbg("%s - already writing", __func__);
return 0;
}
port->write_urb_busy = 1;
count = min(count, port->bulk_out_size);
memcpy(port->bulk_out_buffer, buf, count);
- dbg("%s count now:%d", __FUNCTION__, count);
+ dbg("%s count now:%d", __func__, count);
usb_fill_bulk_urb(port->write_urb, dev,
usb_sndbulkpipe(dev, port->bulk_out_endpointAddress),
ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (ret != 0) {
port->write_urb_busy = 0;
- dbg("%s - usb_submit_urb(write bulk) failed with error = %d", __FUNCTION__, ret);
+ dbg("%s - usb_submit_urb(write bulk) failed with error = %d", __func__, ret);
return ret;
}
- dbg("%s returning %d", __FUNCTION__, count);
+ dbg("%s returning %d", __func__, count);
return count;
}
USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
0, ifnum, desc, sizeof(*desc), 1000);
- dbg("%s - ret=%d", __FUNCTION__, ret);
+ dbg("%s - ret=%d", __func__, ret);
if (ret < sizeof(*desc)) {
dbg("%s - class descriptor read %s (%d)",
- __FUNCTION__,
+ __func__,
(ret<0) ? "failed" : "too short",
ret);
goto error;
}
if (desc->bDescriptorType != USB_DT_IRDA) {
- dbg("%s - bad class descriptor type", __FUNCTION__);
+ dbg("%s - bad class descriptor type", __func__);
goto error;
}
}
dbg ("%s - Baud rates supported:%s%s%s%s%s%s%s%s%s",
- __FUNCTION__,
+ __func__,
(irda_desc->wBaudRate & 0x0001) ? " 2400" : "",
(irda_desc->wBaudRate & 0x0002) ? " 9600" : "",
(irda_desc->wBaudRate & 0x0004) ? " 19200" : "",
char *buffer;
int result = 0;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (buffer_size) {
/* override the default buffer sizes */
buffer = kmalloc (buffer_size, GFP_KERNEL);
if (!buffer) {
- dev_err (&port->dev, "%s - out of memory.\n", __FUNCTION__);
+ dev_err (&port->dev, "%s - out of memory.\n", __func__);
return -ENOMEM;
}
kfree (port->read_urb->transfer_buffer);
buffer = kmalloc (buffer_size, GFP_KERNEL);
if (!buffer) {
- dev_err (&port->dev, "%s - out of memory.\n", __FUNCTION__);
+ dev_err (&port->dev, "%s - out of memory.\n", __func__);
return -ENOMEM;
}
kfree (port->write_urb->transfer_buffer);
port);
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result)
- dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result);
return result;
}
static void ir_close (struct usb_serial_port *port, struct file * filp)
{
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* shutdown our bulk read */
usb_kill_urb(port->read_urb);
int result;
int transfer_size;
- dbg("%s - port = %d, count = %d", __FUNCTION__, port->number, count);
+ dbg("%s - port = %d, count = %d", __func__, port->number, count);
if (!port->tty) {
- dev_err (&port->dev, "%s - no tty???\n", __FUNCTION__);
+ dev_err (&port->dev, "%s - no tty???\n", __func__);
return 0;
}
spin_lock_bh(&port->lock);
if (port->write_urb_busy) {
spin_unlock_bh(&port->lock);
- dbg("%s - already writing", __FUNCTION__);
+ dbg("%s - already writing", __func__);
return 0;
}
port->write_urb_busy = 1;
result = usb_submit_urb (port->write_urb, GFP_ATOMIC);
if (result) {
port->write_urb_busy = 0;
- dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __func__, result);
} else
result = transfer_size;
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
port->write_urb_busy = 0;
if (status) {
dbg("%s - nonzero write bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
}
usb_serial_debug_data (
debug,
&port->dev,
- __FUNCTION__,
+ __func__,
urb->actual_length,
urb->transfer_buffer);
int result;
int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (!port->open_count) {
- dbg("%s - port closed.", __FUNCTION__);
+ dbg("%s - port closed.", __func__);
return;
}
usb_serial_debug_data (
debug,
&port->dev,
- __FUNCTION__,
+ __func__,
urb->actual_length,
data);
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n",
- __FUNCTION__, result);
+ __func__, result);
break ;
default:
dbg("%s - nonzero read bulk status received: %d",
- __FUNCTION__,
+ __func__,
status);
break ;
speed_t baud;
int ir_baud;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
baud = tty_get_baud_rate(port->tty);
result = usb_submit_urb (port->write_urb, GFP_KERNEL);
if (result)
- dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __func__, result);
/* Only speed changes are supported */
tty_termios_copy_hw(port->tty->termios, old_termios);
priv->writebuf = kzalloc(256, GFP_KERNEL);
if (!priv->buf || !priv->dbgbuf || !priv->writebuf) {
iuu_free_buf(priv);
- dbg("%s problem allocation buffer", __FUNCTION__);
+ dbg("%s problem allocation buffer", __func__);
return -ENOMEM;
}
- dbg("%s - Privates buffers allocation success", __FUNCTION__);
+ dbg("%s - Privates buffers allocation success", __func__);
return 0;
}
{
struct iuu_private *priv;
priv = kzalloc(sizeof(struct iuu_private), GFP_KERNEL);
- dbg("%s- priv allocation success", __FUNCTION__);
+ dbg("%s- priv allocation success", __func__);
if (!priv)
return -ENOMEM;
if (iuu_alloc_buf(priv)) {
if (!port)
return;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
if (priv) {
iuu_free_buf(priv);
- dbg("%s - I will free all", __FUNCTION__);
+ dbg("%s - I will free all", __func__);
usb_set_serial_port_data(port, NULL);
- dbg("%s - priv is not anymore in port structure", __FUNCTION__);
+ dbg("%s - priv is not anymore in port structure", __func__);
kfree(priv);
- dbg("%s priv is now kfree", __FUNCTION__);
+ dbg("%s priv is now kfree", __func__);
}
}
unsigned long flags;
/* FIXME: locking on tiomstatus */
- dbg("%s (%d) msg : SET = 0x%04x, CLEAR = 0x%04x ", __FUNCTION__,
+ dbg("%s (%d) msg : SET = 0x%04x, CLEAR = 0x%04x ", __func__,
port->number, set, clear);
spin_lock_irqsave(&priv->lock, flags);
priv->tiostatus = TIOCM_RTS;
if (!(set & TIOCM_RTS) && priv->tiostatus == TIOCM_RTS) {
- dbg("%s TIOCMSET RESET called !!!", __FUNCTION__);
+ dbg("%s TIOCMSET RESET called !!!", __func__);
priv->reset = 1;
}
spin_unlock_irqrestore(&priv->lock, flags);
{
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
int result;
- dbg("%s - enter", __FUNCTION__);
+ dbg("%s - enter", __func__);
if (urb->status) {
- dbg("%s - urb->status = %d", __FUNCTION__, urb->status);
+ dbg("%s - urb->status = %d", __func__, urb->status);
/* error stop all */
return;
}
struct iuu_private *priv = usb_get_serial_port_data(port);
int result;
char *buf_ptr = port->write_urb->transfer_buffer;
- dbg("%s - enter", __FUNCTION__);
+ dbg("%s - enter", __func__);
/* Prepare the reset sequence */
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
struct iuu_private *priv = usb_get_serial_port_data(port);
u8 *st;
- dbg("%s - enter", __FUNCTION__);
+ dbg("%s - enter", __func__);
if (urb->status) {
- dbg("%s - urb->status = %d", __FUNCTION__, urb->status);
+ dbg("%s - urb->status = %d", __func__, urb->status);
/* error stop all */
return;
}
st = urb->transfer_buffer;
- dbg("%s - enter", __FUNCTION__);
+ dbg("%s - enter", __func__);
if (urb->actual_length == 1) {
switch (st[0]) {
case 0x1:
{
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
int result;
- dbg("%s - enter", __FUNCTION__);
+ dbg("%s - enter", __func__);
- dbg("%s - urb->status = %d", __FUNCTION__, urb->status);
+ dbg("%s - urb->status = %d", __func__, urb->status);
usb_fill_bulk_urb(port->read_urb, port->serial->dev,
usb_rcvbulkpipe(port->serial->dev,
port->bulk_in_endpointAddress),
{
int result;
- dbg("%s - enter", __FUNCTION__);
+ dbg("%s - enter", __func__);
memset(port->write_urb->transfer_buffer, IUU_GET_STATE_REGISTER, 1);
usb_fill_bulk_urb(port->write_urb, port->serial->dev,
struct usb_serial *serial = port->serial;
int actual = 0;
- dbg("%s - enter", __FUNCTION__);
+ dbg("%s - enter", __func__);
/* send the data out the bulk port */
count, &actual, HZ * 1);
if (status != IUU_OPERATION_OK) {
- dbg("%s - error = %2x", __FUNCTION__, status);
+ dbg("%s - error = %2x", __func__, status);
} else {
- dbg("%s - write OK !", __FUNCTION__);
+ dbg("%s - write OK !", __func__);
}
return status;
}
struct usb_serial *serial = port->serial;
int actual = 0;
- dbg("%s - enter", __FUNCTION__);
+ dbg("%s - enter", __func__);
/* send the data out the bulk port */
count, &actual, HZ * 1);
if (status != IUU_OPERATION_OK) {
- dbg("%s - error = %2x", __FUNCTION__, status);
+ dbg("%s - error = %2x", __func__, status);
} else {
- dbg("%s - read OK !", __FUNCTION__);
+ dbg("%s - read OK !", __func__);
}
return status;
if (!buf)
return -ENOMEM;
- dbg("%s - enter", __FUNCTION__);
+ dbg("%s - enter", __func__);
buf[0] = IUU_SET_LED;
buf[1] = R & 0xFF;
status = bulk_immediate(port, buf, 8);
kfree(buf);
if (status != IUU_OPERATION_OK)
- dbg("%s - led error status = %2x", __FUNCTION__, status);
+ dbg("%s - led error status = %2x", __func__, status);
else
- dbg("%s - led OK !", __FUNCTION__);
+ dbg("%s - led OK !", __func__);
return IUU_OPERATION_OK;
}
unsigned int P2 = 0;
int frq = (int)dwFrq;
- dbg("%s - enter", __FUNCTION__);
+ dbg("%s - enter", __func__);
if (frq == 0) {
priv->buf[Count++] = IUU_UART_WRITE_I2C;
status = bulk_immediate(port, (u8 *) priv->buf, Count);
if (status != 0) {
- dbg("%s - write error ", __FUNCTION__);
+ dbg("%s - write error ", __func__);
return status;
}
} else if (frq == 3579000) {
status = bulk_immediate(port, (u8 *) priv->buf, Count);
if (status != IUU_OPERATION_OK)
- dbg("%s - write error ", __FUNCTION__);
+ dbg("%s - write error ", __func__);
return status;
}
u8 rxcmd = IUU_UART_RX;
struct iuu_private *priv = usb_get_serial_port_data(port);
- dbg("%s - enter", __FUNCTION__);
+ dbg("%s - enter", __func__);
if (iuu_led(port, 0xF000, 0, 0, 0xFF) < 0)
return -EIO;
for (i = 0; i < 2; i++) {
status = bulk_immediate(port, &rxcmd, 1);
if (status != IUU_OPERATION_OK) {
- dbg("%s - uart_flush_write error", __FUNCTION__);
+ dbg("%s - uart_flush_write error", __func__);
return status;
}
status = read_immediate(port, &priv->len, 1);
if (status != IUU_OPERATION_OK) {
- dbg("%s - uart_flush_read error", __FUNCTION__);
+ dbg("%s - uart_flush_read error", __func__);
return status;
}
if (priv->len > 0) {
- dbg("%s - uart_flush datalen is : %i ", __FUNCTION__,
+ dbg("%s - uart_flush datalen is : %i ", __func__,
priv->len);
status = read_immediate(port, priv->buf, priv->len);
if (status != IUU_OPERATION_OK) {
- dbg("%s - uart_flush_read error", __FUNCTION__);
+ dbg("%s - uart_flush_read error", __func__);
return status;
}
}
}
- dbg("%s - uart_flush_read OK!", __FUNCTION__);
+ dbg("%s - uart_flush_read OK!", __func__);
iuu_led(port, 0, 0xF000, 0, 0xFF);
return status;
}
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
unsigned char *data = urb->transfer_buffer;
struct tty_struct *tty;
- dbg("%s - urb->status = %d", __FUNCTION__, urb->status);
+ dbg("%s - urb->status = %d", __func__, urb->status);
if (urb->status) {
- dbg("%s - urb->status = %d", __FUNCTION__, urb->status);
+ dbg("%s - urb->status = %d", __func__, urb->status);
if (urb->status == -EPROTO) {
/* reschedule needed */
}
return;
}
- dbg("%s - %i chars to write", __FUNCTION__, urb->actual_length);
+ dbg("%s - %i chars to write", __func__, urb->actual_length);
tty = port->tty;
if (data == NULL)
- dbg("%s - data is NULL !!!", __FUNCTION__);
+ dbg("%s - data is NULL !!!", __func__);
if (tty && urb->actual_length && data) {
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
int result;
int i;
char *buf_ptr = port->write_urb->transfer_buffer;
- dbg("%s - enter", __FUNCTION__);
+ dbg("%s - enter", __func__);
*buf_ptr++ = IUU_UART_ESC;
*buf_ptr++ = IUU_UART_TX;
sprintf(priv->dbgbuf + i*2 ,
"%02X", priv->writebuf[i]);
priv->dbgbuf[priv->writelen+i*2] = 0;
- dbg("%s - writing %i chars : %s", __FUNCTION__,
+ dbg("%s - writing %i chars : %s", __func__,
priv->writelen, priv->dbgbuf);
}
usb_fill_bulk_urb(port->write_urb, port->serial->dev,
static int iuu_read_buf(struct usb_serial_port *port, int len)
{
int result;
- dbg("%s - enter", __FUNCTION__);
+ dbg("%s - enter", __func__);
usb_fill_bulk_urb(port->read_urb, port->serial->dev,
usb_rcvbulkpipe(port->serial->dev,
unsigned char *data = urb->transfer_buffer;
priv->poll++;
- dbg("%s - enter", __FUNCTION__);
+ dbg("%s - enter", __func__);
if (urb->status) {
- dbg("%s - urb->status = %d", __FUNCTION__, urb->status);
+ dbg("%s - urb->status = %d", __func__, urb->status);
/* error stop all */
return;
}
if (data == NULL)
- dbg("%s - data is NULL !!!", __FUNCTION__);
+ dbg("%s - data is NULL !!!", __func__);
if (urb->actual_length == 1 && data != NULL)
len = (int) data[0];
if (urb->actual_length > 1) {
- dbg("%s - urb->actual_length = %i", __FUNCTION__,
+ dbg("%s - urb->actual_length = %i", __func__,
urb->actual_length);
error = 1;
return;
if (len > 0 && error == 0) {
dbg("%s - call read buf - len to read is %i ",
- __FUNCTION__, len);
+ __func__, len);
status = iuu_read_buf(port, len);
return;
}
}
spin_unlock_irqrestore(&priv->lock, flags);
/* if nothing to write call again rxcmd */
- dbg("%s - rxcmd recall", __FUNCTION__);
+ dbg("%s - rxcmd recall", __func__);
iuu_led_activity_off(urb);
return;
}
{
struct iuu_private *priv = usb_get_serial_port_data(port);
unsigned int flags;
- dbg("%s - enter", __FUNCTION__);
+ dbg("%s - enter", __func__);
if (count > 256)
return -ENOMEM;
{
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
int result;
- dbg("%s - enter", __FUNCTION__);
+ dbg("%s - enter", __func__);
- dbg("%s - urb->status = %d", __FUNCTION__, urb->status);
+ dbg("%s - urb->status = %d", __func__, urb->status);
if (urb->status) {
- dbg("%s - urb->status = %d", __FUNCTION__, urb->status);
+ dbg("%s - urb->status = %d", __func__, urb->status);
/* error stop all */
return;
}
port->read_urb->transfer_buffer, 256,
iuu_uart_read_callback, port);
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
- dbg("%s - submit result = %d", __FUNCTION__, result);
+ dbg("%s - submit result = %d", __func__, result);
return;
}
status = bulk_immediate(port, buf, 4);
if (status != IUU_OPERATION_OK) {
- dbg("%s - uart_on error", __FUNCTION__);
+ dbg("%s - uart_on error", __func__);
goto uart_enable_failed;
}
/* iuu_reset() the card after iuu_uart_on() */
status = iuu_uart_flush(port);
if (status != IUU_OPERATION_OK)
- dbg("%s - uart_flush error", __FUNCTION__);
+ dbg("%s - uart_flush error", __func__);
uart_enable_failed:
kfree(buf);
return status;
status = bulk_immediate(port, buf, 1);
if (status != IUU_OPERATION_OK)
- dbg("%s - uart_off error", __FUNCTION__);
+ dbg("%s - uart_off error", __func__);
kfree(buf);
return status;
status = bulk_immediate(port, dataout, DataCount);
if (status != IUU_OPERATION_OK)
- dbg("%s - uart_off error", __FUNCTION__);
+ dbg("%s - uart_off error", __func__);
kfree(dataout);
return status;
}
if (!serial)
return;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
iuu_uart_off(port);
if (serial->dev) {
}
/* free writebuf */
/* shutdown our urbs */
- dbg("%s - shutting down urbs", __FUNCTION__);
+ dbg("%s - shutting down urbs", __func__);
usb_kill_urb(port->write_urb);
usb_kill_urb(port->read_urb);
usb_kill_urb(port->interrupt_in_urb);
unsigned long flags;
struct iuu_private *priv = usb_get_serial_port_data(port);
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
usb_clear_halt(serial->dev, port->write_urb->pipe);
usb_clear_halt(serial->dev, port->read_urb->pipe);
iuu_uart_flush(port);
- dbg("%s - initialization done", __FUNCTION__);
+ dbg("%s - initialization done", __func__);
memset(port->write_urb->transfer_buffer, IUU_UART_RX, 1);
usb_fill_bulk_urb(port->write_urb, port->serial->dev,
if (result) {
dev_err(&port->dev, "%s - failed submitting read urb,"
- " error %d\n", __FUNCTION__, result);
+ " error %d\n", __func__, result);
iuu_close(port, NULL);
return -EPROTO;
} else {
- dbg("%s - rxcmd OK", __FUNCTION__);
+ dbg("%s - rxcmd OK", __func__);
}
return result;
}
static void keyspan_rx_throttle (struct usb_serial_port *port)
{
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
}
static void keyspan_rx_unthrottle (struct usb_serial_port *port)
{
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
}
{
struct keyspan_port_private *p_priv;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
p_priv = usb_get_serial_port_data(port);
unsigned int cflag;
struct tty_struct *tty = port->tty;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
p_priv = usb_get_serial_port_data(port);
d_details = p_priv->device_details;
}
dbg("%s - for port %d (%d chars), flip=%d",
- __FUNCTION__, port->number, count, p_priv->out_flip);
+ __func__, port->number, count, p_priv->out_flip);
for (left = count; left > 0; left -= todo) {
todo = left;
/* Check we have a valid urb/endpoint before we use it... */
if ((this_urb = p_priv->out_urbs[flip]) == NULL) {
/* no bulk out, so return 0 bytes written */
- dbg("%s - no output urb :(", __FUNCTION__);
+ dbg("%s - no output urb :(", __func__);
return count;
}
- dbg("%s - endpoint %d flip %d", __FUNCTION__, usb_pipeendpoint(this_urb->pipe), flip);
+ dbg("%s - endpoint %d flip %d", __func__, usb_pipeendpoint(this_urb->pipe), flip);
if (this_urb->status == -EINPROGRESS) {
if (time_before(jiffies, p_priv->tx_start_time[flip] + 10 * HZ))
unsigned char *data = urb->transfer_buffer;
int status = urb->status;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
endpoint = usb_pipeendpoint(urb->pipe);
if (status) {
dbg("%s - nonzero status: %x on endpoint %d.",
- __FUNCTION__, status, endpoint);
+ __func__, status, endpoint);
return;
}
}
} else {
/* some bytes had errors, every byte has status */
- dbg("%s - RX error!!!!", __FUNCTION__);
+ dbg("%s - RX error!!!!", __func__);
for (i = 0; i + 1 < urb->actual_length; i += 2) {
int stat = data[i], flag = 0;
if (stat & RXERROR_OVERRUN)
urb->dev = port->serial->dev;
if (port->open_count)
if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
- dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
+ dbg("%s - resubmit read urb failed. (%d)", __func__, err);
}
return;
}
port = (struct usb_serial_port *) urb->context;
p_priv = usb_get_serial_port_data(port);
- dbg ("%s - urb %d", __FUNCTION__, urb == p_priv->out_urbs[1]);
+ dbg ("%s - urb %d", __func__, urb == p_priv->out_urbs[1]);
if (port->open_count)
usb_serial_port_softint(port);
static void usa26_inack_callback(struct urb *urb)
{
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
}
p_priv = usb_get_serial_port_data(port);
if (p_priv->resend_cont) {
- dbg ("%s - sending setup", __FUNCTION__);
+ dbg ("%s - sending setup", __func__);
keyspan_usa26_send_setup(port->serial, port, p_priv->resend_cont - 1);
}
}
serial = (struct usb_serial *) urb->context;
if (status) {
- dbg("%s - nonzero status: %x", __FUNCTION__, status);
+ dbg("%s - nonzero status: %x", __func__, status);
return;
}
if (urb->actual_length != 9) {
- dbg("%s - %d byte report??", __FUNCTION__, urb->actual_length);
+ dbg("%s - %d byte report??", __func__, urb->actual_length);
goto exit;
}
#if 0
dbg("%s - port status: port %d cts %d dcd %d dsr %d ri %d toff %d txoff %d rxen %d cr %d",
- __FUNCTION__, msg->port, msg->hskia_cts, msg->gpia_dcd, msg->dsr, msg->ri, msg->_txOff,
+ __func__, msg->port, msg->hskia_cts, msg->gpia_dcd, msg->dsr, msg->ri, msg->_txOff,
msg->_txXoff, msg->rxEnabled, msg->controlResponse);
#endif
/* Check port number from message and retrieve private data */
if (msg->port >= serial->num_ports) {
- dbg ("%s - Unexpected port number %d", __FUNCTION__, msg->port);
+ dbg ("%s - Unexpected port number %d", __func__, msg->port);
goto exit;
}
port = serial->port[msg->port];
/* Resubmit urb so we continue receiving */
urb->dev = serial->dev;
if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
- dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
+ dbg("%s - resubmit read urb failed. (%d)", __func__, err);
}
exit: ;
}
static void usa26_glocont_callback(struct urb *urb)
{
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
}
struct keyspan_port_private *p_priv;
int status = urb->status;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
port = (struct usb_serial_port *) urb->context;
p_priv = usb_get_serial_port_data(port);
do {
if (status) {
dbg("%s - nonzero status: %x on endpoint %d.",
- __FUNCTION__, status, usb_pipeendpoint(urb->pipe));
+ __func__, status, usb_pipeendpoint(urb->pipe));
return;
}
urb->dev = port->serial->dev;
if (port->open_count)
if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
- dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
+ dbg("%s - resubmit read urb failed. (%d)", __func__, err);
}
p_priv->in_flip ^= 1;
static void usa28_inack_callback(struct urb *urb)
{
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
}
static void usa28_outcont_callback(struct urb *urb)
p_priv = usb_get_serial_port_data(port);
if (p_priv->resend_cont) {
- dbg ("%s - sending setup", __FUNCTION__);
+ dbg ("%s - sending setup", __func__);
keyspan_usa28_send_setup(port->serial, port, p_priv->resend_cont - 1);
}
}
serial = (struct usb_serial *) urb->context;
if (status) {
- dbg("%s - nonzero status: %x", __FUNCTION__, status);
+ dbg("%s - nonzero status: %x", __func__, status);
return;
}
if (urb->actual_length != sizeof(struct keyspan_usa28_portStatusMessage)) {
- dbg("%s - bad length %d", __FUNCTION__, urb->actual_length);
+ dbg("%s - bad length %d", __func__, urb->actual_length);
goto exit;
}
- /*dbg("%s %x %x %x %x %x %x %x %x %x %x %x %x", __FUNCTION__
+ /*dbg("%s %x %x %x %x %x %x %x %x %x %x %x %x", __func__
data[0], data[1], data[2], data[3], data[4], data[5],
data[6], data[7], data[8], data[9], data[10], data[11]);*/
/* Check port number from message and retrieve private data */
if (msg->port >= serial->num_ports) {
- dbg ("%s - Unexpected port number %d", __FUNCTION__, msg->port);
+ dbg ("%s - Unexpected port number %d", __func__, msg->port);
goto exit;
}
port = serial->port[msg->port];
/* Resubmit urb so we continue receiving */
urb->dev = serial->dev;
if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
- dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
+ dbg("%s - resubmit read urb failed. (%d)", __func__, err);
}
exit: ;
}
static void usa28_glocont_callback(struct urb *urb)
{
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
}
struct keyspan_port_private *p_priv;
int i;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
serial = (struct usb_serial *) urb->context;
for (i = 0; i < serial->num_ports; ++i) {
p_priv = usb_get_serial_port_data(port);
if (p_priv->resend_cont) {
- dbg ("%s - sending setup", __FUNCTION__);
+ dbg ("%s - sending setup", __func__);
keyspan_usa49_send_setup(serial, port, p_priv->resend_cont - 1);
break;
}
int old_dcd_state;
int status = urb->status;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
serial = (struct usb_serial *) urb->context;
if (status) {
- dbg("%s - nonzero status: %x", __FUNCTION__, status);
+ dbg("%s - nonzero status: %x", __func__, status);
return;
}
if (urb->actual_length != sizeof(struct keyspan_usa49_portStatusMessage)) {
- dbg("%s - bad length %d", __FUNCTION__, urb->actual_length);
+ dbg("%s - bad length %d", __func__, urb->actual_length);
goto exit;
}
- /*dbg(" %x %x %x %x %x %x %x %x %x %x %x", __FUNCTION__,
+ /*dbg(" %x %x %x %x %x %x %x %x %x %x %x", __func__,
data[0], data[1], data[2], data[3], data[4], data[5],
data[6], data[7], data[8], data[9], data[10]);*/
/* Check port number from message and retrieve private data */
if (msg->portNumber >= serial->num_ports) {
- dbg ("%s - Unexpected port number %d", __FUNCTION__, msg->portNumber);
+ dbg ("%s - Unexpected port number %d", __func__, msg->portNumber);
goto exit;
}
port = serial->port[msg->portNumber];
urb->dev = serial->dev;
if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
- dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
+ dbg("%s - resubmit read urb failed. (%d)", __func__, err);
}
exit: ;
}
static void usa49_inack_callback(struct urb *urb)
{
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
}
static void usa49_indat_callback(struct urb *urb)
unsigned char *data = urb->transfer_buffer;
int status = urb->status;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
endpoint = usb_pipeendpoint(urb->pipe);
if (status) {
- dbg("%s - nonzero status: %x on endpoint %d.", __FUNCTION__,
+ dbg("%s - nonzero status: %x on endpoint %d.", __func__,
status, endpoint);
return;
}
urb->dev = port->serial->dev;
if (port->open_count)
if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
- dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
+ dbg("%s - resubmit read urb failed. (%d)", __func__, err);
}
}
unsigned char *data = urb->transfer_buffer;
int status = urb->status;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
serial = urb->context;
if (status) {
- dbg("%s - nonzero status: %x", __FUNCTION__, status);
+ dbg("%s - nonzero status: %x", __func__, status);
return;
}
/* Check port number from message*/
if (data[i] >= serial->num_ports) {
dbg ("%s - Unexpected port number %d",
- __FUNCTION__, data[i]);
+ __func__, data[i]);
return;
}
port = serial->port[data[i++]];
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
- dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
+ dbg("%s - resubmit read urb failed. (%d)", __func__, err);
}
/* not used, usa-49 doesn't have per-port control endpoints */
static void usa49_outcont_callback(struct urb *urb)
{
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
}
static void usa90_indat_callback(struct urb *urb)
unsigned char *data = urb->transfer_buffer;
int status = urb->status;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
endpoint = usb_pipeendpoint(urb->pipe);
if (status) {
dbg("%s - nonzero status: %x on endpoint %d.",
- __FUNCTION__, status, endpoint);
+ __func__, status, endpoint);
return;
}
}
else {
/* some bytes had errors, every byte has status */
- dbg("%s - RX error!!!!", __FUNCTION__);
+ dbg("%s - RX error!!!!", __func__);
for (i = 0; i + 1 < urb->actual_length; i += 2) {
int stat = data[i], flag = 0;
if (stat & RXERROR_OVERRUN)
urb->dev = port->serial->dev;
if (port->open_count)
if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
- dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
+ dbg("%s - resubmit read urb failed. (%d)", __func__, err);
}
return;
}
serial = (struct usb_serial *) urb->context;
if (status) {
- dbg("%s - nonzero status: %x", __FUNCTION__, status);
+ dbg("%s - nonzero status: %x", __func__, status);
return;
}
if (urb->actual_length < 14) {
- dbg("%s - %d byte report??", __FUNCTION__, urb->actual_length);
+ dbg("%s - %d byte report??", __func__, urb->actual_length);
goto exit;
}
/* Resubmit urb so we continue receiving */
urb->dev = serial->dev;
if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
- dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
+ dbg("%s - resubmit read urb failed. (%d)", __func__, err);
}
exit:
;
p_priv = usb_get_serial_port_data(port);
if (p_priv->resend_cont) {
- dbg ("%s - sending setup", __FUNCTION__);
+ dbg ("%s - sending setup", __func__);
keyspan_usa90_send_setup(port->serial, port, p_priv->resend_cont - 1);
}
}
int old_dcd_state;
int status = urb->status;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
serial = urb->context;
if (status) {
- dbg("%s - nonzero status: %x", __FUNCTION__, status);
+ dbg("%s - nonzero status: %x", __func__, status);
return;
}
if (urb->actual_length != sizeof(struct keyspan_usa67_portStatusMessage)) {
- dbg("%s - bad length %d", __FUNCTION__, urb->actual_length);
+ dbg("%s - bad length %d", __func__, urb->actual_length);
return;
}
/* Check port number from message and retrieve private data */
if (msg->port >= serial->num_ports) {
- dbg ("%s - Unexpected port number %d", __FUNCTION__, msg->port);
+ dbg ("%s - Unexpected port number %d", __func__, msg->port);
return;
}
urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
- dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
+ dbg("%s - resubmit read urb failed. (%d)", __func__, err);
}
static void usa67_glocont_callback(struct urb *urb)
struct keyspan_port_private *p_priv;
int i;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
serial = urb->context;
for (i = 0; i < serial->num_ports; ++i) {
p_priv = usb_get_serial_port_data(port);
if (p_priv->resend_cont) {
- dbg ("%s - sending setup", __FUNCTION__);
+ dbg ("%s - sending setup", __func__);
keyspan_usa67_send_setup(serial, port,
p_priv->resend_cont - 1);
break;
int data_len;
struct urb *this_urb;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
p_priv = usb_get_serial_port_data(port);
d_details = p_priv->device_details;
p_priv = usb_get_serial_port_data(port);
d_details = p_priv->device_details;
- dbg("%s - port%d.", __FUNCTION__, port->number);
+ dbg("%s - port%d.", __func__, port->number);
/* Set some sane defaults */
p_priv->rts_state = 1;
usb_clear_halt(urb->dev, urb->pipe);
if ((err = usb_submit_urb(urb, GFP_KERNEL)) != 0) {
- dbg("%s - submit urb %d failed (%d)", __FUNCTION__, i, err);
+ dbg("%s - submit urb %d failed (%d)", __func__, i, err);
}
}
struct keyspan_serial_private *s_priv;
struct keyspan_port_private *p_priv;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
s_priv = usb_get_serial_data(serial);
p_priv = usb_get_serial_port_data(port);
}
/*while (p_priv->outcont_urb->status == -EINPROGRESS) {
- dbg("%s - urb in progress", __FUNCTION__);
+ dbg("%s - urb in progress", __func__);
}*/
p_priv->out_flip = 0;
if (endpoint == -1)
return NULL; /* endpoint not needed */
- dbg ("%s - alloc for endpoint %d.", __FUNCTION__, endpoint);
+ dbg ("%s - alloc for endpoint %d.", __func__, endpoint);
urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
if (urb == NULL) {
- dbg ("%s - alloc for endpoint %d failed.", __FUNCTION__, endpoint);
+ dbg ("%s - alloc for endpoint %d failed.", __func__, endpoint);
return NULL;
}
struct callbacks *cback;
int endp;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
s_priv = usb_get_serial_data(serial);
d_details = s_priv->device_details;
div, /* divisor */
cnt; /* inverse of divisor (programmed into 8051) */
- dbg ("%s - %d.", __FUNCTION__, baud_rate);
+ dbg ("%s - %d.", __func__, baud_rate);
/* prevent divide by zero... */
if( (b16 = (baud_rate * 16L)) == 0) {
*rate_hi = (u8) ((cnt >> 8) & 0xff);
}
if (rate_low && rate_hi) {
- dbg ("%s - %d %02x %02x.", __FUNCTION__, baud_rate, *rate_hi, *rate_low);
+ dbg ("%s - %d %02x %02x.", __func__, baud_rate, *rate_hi, *rate_low);
}
return (KEYSPAN_BAUD_RATE_OK);
u32 b16, /* baud rate times 16 (actual rate used internally) */
div; /* divisor */
- dbg ("%s - %d.", __FUNCTION__, baud_rate);
+ dbg ("%s - %d.", __func__, baud_rate);
/* prevent divide by zero... */
if( (b16 = (baud_rate * 16L)) == 0)
*rate_hi = (u8) ((div >> 8) & 0xff);
if (rate_low && rate_hi)
- dbg ("%s - %d %02x %02x.", __FUNCTION__, baud_rate, *rate_hi, *rate_low);
+ dbg ("%s - %d %02x %02x.", __func__, baud_rate, *rate_hi, *rate_low);
return (KEYSPAN_BAUD_RATE_OK);
}
u8 best_prescaler;
int i;
- dbg ("%s - %d.", __FUNCTION__, baud_rate);
+ dbg ("%s - %d.", __func__, baud_rate);
/* prevent divide by zero */
if( (b16 = baud_rate * 16L) == 0) {
}
if (prescaler) {
*prescaler = best_prescaler;
- /* dbg("%s - %d %d", __FUNCTION__, *prescaler, div); */
+ /* dbg("%s - %d %d", __func__, *prescaler, div); */
}
return (KEYSPAN_BAUD_RATE_OK);
}
div, /* divisor */
cnt; /* inverse of divisor (programmed into 8051) */
- dbg ("%s - %d.", __FUNCTION__, baud_rate);
+ dbg ("%s - %d.", __func__, baud_rate);
/* prevent divide by zero */
if ((b16 = baud_rate * 16L) == 0)
if (rate_hi) {
*rate_hi = (u8) ((cnt >> 8) & 0xff);
}
- dbg ("%s - %d OK.", __FUNCTION__, baud_rate);
+ dbg ("%s - %d OK.", __func__, baud_rate);
return (KEYSPAN_BAUD_RATE_OK);
}
struct urb *this_urb;
int device_port, err;
- dbg ("%s reset=%d", __FUNCTION__, reset_port);
+ dbg ("%s reset=%d", __func__, reset_port);
s_priv = usb_get_serial_data(serial);
p_priv = usb_get_serial_port_data(port);
outcont_urb = d_details->outcont_endpoints[port->number];
this_urb = p_priv->outcont_urb;
- dbg("%s - endpoint %d", __FUNCTION__, usb_pipeendpoint(this_urb->pipe));
+ dbg("%s - endpoint %d", __func__, usb_pipeendpoint(this_urb->pipe));
/* Make sure we have an urb then send the message */
if (this_urb == NULL) {
- dbg("%s - oops no urb.", __FUNCTION__);
+ dbg("%s - oops no urb.", __func__);
return -1;
}
if ((reset_port + 1) > p_priv->resend_cont)
p_priv->resend_cont = reset_port + 1;
if (this_urb->status == -EINPROGRESS) {
- /* dbg ("%s - already writing", __FUNCTION__); */
+ /* dbg ("%s - already writing", __func__); */
mdelay(5);
return(-1);
}
if (d_details->calculate_baud_rate
(p_priv->baud, d_details->baudclk, &msg.baudHi,
&msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE ) {
- dbg("%s - Invalid baud rate %d requested, using 9600.", __FUNCTION__,
+ dbg("%s - Invalid baud rate %d requested, using 9600.", __func__,
p_priv->baud);
msg.baudLo = 0;
msg.baudHi = 125; /* Values for 9600 baud */
this_urb->dev = serial->dev;
if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) {
- dbg("%s - usb_submit_urb(setup) failed (%d)", __FUNCTION__, err);
+ dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err);
}
#if 0
else {
- dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __FUNCTION__
+ dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __func__
outcont_urb, this_urb->transfer_buffer_length,
usb_pipeendpoint(this_urb->pipe));
}
struct urb *this_urb;
int device_port, err;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
s_priv = usb_get_serial_data(serial);
p_priv = usb_get_serial_port_data(port);
/* only do something if we have a bulk out endpoint */
if ((this_urb = p_priv->outcont_urb) == NULL) {
- dbg("%s - oops no urb.", __FUNCTION__);
+ dbg("%s - oops no urb.", __func__);
return -1;
}
if ((reset_port + 1) > p_priv->resend_cont)
p_priv->resend_cont = reset_port + 1;
if (this_urb->status == -EINPROGRESS) {
- dbg ("%s already writing", __FUNCTION__);
+ dbg ("%s already writing", __func__);
mdelay(5);
return(-1);
}
msg.setBaudRate = 1;
if (d_details->calculate_baud_rate(p_priv->baud, d_details->baudclk,
&msg.baudHi, &msg.baudLo, NULL, device_port) == KEYSPAN_INVALID_BAUD_RATE ) {
- dbg("%s - Invalid baud rate requested %d.", __FUNCTION__, p_priv->baud);
+ dbg("%s - Invalid baud rate requested %d.", __func__, p_priv->baud);
msg.baudLo = 0xff;
msg.baudHi = 0xb2; /* Values for 9600 baud */
}
this_urb->dev = serial->dev;
if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) {
- dbg("%s - usb_submit_urb(setup) failed", __FUNCTION__);
+ dbg("%s - usb_submit_urb(setup) failed", __func__);
}
#if 0
else {
- dbg("%s - usb_submit_urb(setup) OK %d bytes", __FUNCTION__,
+ dbg("%s - usb_submit_urb(setup) OK %d bytes", __func__,
this_urb->transfer_buffer_length);
}
#endif
struct urb *this_urb;
int err, device_port;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
s_priv = usb_get_serial_data(serial);
p_priv = usb_get_serial_port_data(port);
/* Work out which port within the device is being setup */
device_port = port->number - port->serial->minor;
- dbg("%s - endpoint %d port %d (%d)",__FUNCTION__, usb_pipeendpoint(this_urb->pipe), port->number, device_port);
+ dbg("%s - endpoint %d port %d (%d)",__func__, usb_pipeendpoint(this_urb->pipe), port->number, device_port);
/* Make sure we have an urb then send the message */
if (this_urb == NULL) {
- dbg("%s - oops no urb for port %d.", __FUNCTION__, port->number);
+ dbg("%s - oops no urb for port %d.", __func__, port->number);
return -1;
}
p_priv->resend_cont = reset_port + 1;
if (this_urb->status == -EINPROGRESS) {
- /* dbg ("%s - already writing", __FUNCTION__); */
+ /* dbg ("%s - already writing", __func__); */
mdelay(5);
return(-1);
}
if (d_details->calculate_baud_rate
(p_priv->baud, d_details->baudclk, &msg.baudHi,
&msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE ) {
- dbg("%s - Invalid baud rate %d requested, using 9600.", __FUNCTION__,
+ dbg("%s - Invalid baud rate %d requested, using 9600.", __func__,
p_priv->baud);
msg.baudLo = 0;
msg.baudHi = 125; /* Values for 9600 baud */
this_urb->dev = serial->dev;
}
if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) {
- dbg("%s - usb_submit_urb(setup) failed (%d)", __FUNCTION__, err);
+ dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err);
}
#if 0
else {
- dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __FUNCTION__,
+ dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __func__,
outcont_urb, this_urb->transfer_buffer_length,
usb_pipeendpoint(this_urb->pipe));
}
int err;
u8 prescaler;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
s_priv = usb_get_serial_data(serial);
p_priv = usb_get_serial_port_data(port);
/* only do something if we have a bulk out endpoint */
if ((this_urb = p_priv->outcont_urb) == NULL) {
- dbg("%s - oops no urb.", __FUNCTION__);
+ dbg("%s - oops no urb.", __func__);
return -1;
}
if ((reset_port + 1) > p_priv->resend_cont)
p_priv->resend_cont = reset_port + 1;
if (this_urb->status == -EINPROGRESS) {
- dbg ("%s already writing", __FUNCTION__);
+ dbg ("%s already writing", __func__);
mdelay(5);
return(-1);
}
if (d_details->calculate_baud_rate
(p_priv->baud, d_details->baudclk, &msg.baudHi,
&msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE ) {
- dbg("%s - Invalid baud rate %d requested, using 9600.", __FUNCTION__,
+ dbg("%s - Invalid baud rate %d requested, using 9600.", __func__,
p_priv->baud);
p_priv->baud = 9600;
d_details->calculate_baud_rate (p_priv->baud, d_details->baudclk,
this_urb->dev = serial->dev;
if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) {
- dbg("%s - usb_submit_urb(setup) failed (%d)", __FUNCTION__, err);
+ dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err);
}
return (0);
}
struct urb *this_urb;
int err, device_port;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
s_priv = usb_get_serial_data(serial);
p_priv = usb_get_serial_port_data(port);
/* Make sure we have an urb then send the message */
if (this_urb == NULL) {
- dbg("%s - oops no urb for port %d.", __FUNCTION__,
+ dbg("%s - oops no urb for port %d.", __func__,
port->number);
return -1;
}
if ((reset_port + 1) > p_priv->resend_cont)
p_priv->resend_cont = reset_port + 1;
if (this_urb->status == -EINPROGRESS) {
- /* dbg ("%s - already writing", __FUNCTION__); */
+ /* dbg ("%s - already writing", __func__); */
mdelay(5);
return(-1);
}
if (d_details->calculate_baud_rate
(p_priv->baud, d_details->baudclk, &msg.baudHi,
&msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE ) {
- dbg("%s - Invalid baud rate %d requested, using 9600.", __FUNCTION__,
+ dbg("%s - Invalid baud rate %d requested, using 9600.", __func__,
p_priv->baud);
msg.baudLo = 0;
msg.baudHi = 125; /* Values for 9600 baud */
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err != 0)
- dbg("%s - usb_submit_urb(setup) failed (%d)", __FUNCTION__,
+ dbg("%s - usb_submit_urb(setup) failed (%d)", __func__,
err);
return (0);
}
struct keyspan_serial_private *s_priv;
const struct keyspan_device_details *d_details;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
s_priv = usb_get_serial_data(serial);
d_details = s_priv->device_details;
struct keyspan_port_private *p_priv;
const struct keyspan_device_details *d_details;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
for (i = 0; (d_details = keyspan_devices[i]) != NULL; ++i)
if (d_details->product_id == le16_to_cpu(serial->dev->descriptor.idProduct))
break;
if (d_details == NULL) {
- dev_err(&serial->dev->dev, "%s - unknown product id %x\n", __FUNCTION__, le16_to_cpu(serial->dev->descriptor.idProduct));
+ dev_err(&serial->dev->dev, "%s - unknown product id %x\n", __func__, le16_to_cpu(serial->dev->descriptor.idProduct));
return 1;
}
/* Setup private data for serial driver */
s_priv = kzalloc(sizeof(struct keyspan_serial_private), GFP_KERNEL);
if (!s_priv) {
- dbg("%s - kmalloc for keyspan_serial_private failed.", __FUNCTION__);
+ dbg("%s - kmalloc for keyspan_serial_private failed.", __func__);
return -ENOMEM;
}
port = serial->port[i];
p_priv = kzalloc(sizeof(struct keyspan_port_private), GFP_KERNEL);
if (!p_priv) {
- dbg("%s - kmalloc for keyspan_port_private (%d) failed!.", __FUNCTION__, i);
+ dbg("%s - kmalloc for keyspan_port_private (%d) failed!.", __func__, i);
return (1);
}
p_priv->device_details = d_details;
s_priv->instat_urb->dev = serial->dev;
err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL);
if (err != 0)
- dbg("%s - submit instat urb failed %d", __FUNCTION__,
+ dbg("%s - submit instat urb failed %d", __func__,
err);
}
if (s_priv->indat_urb != NULL) {
s_priv->indat_urb->dev = serial->dev;
err = usb_submit_urb(s_priv->indat_urb, GFP_KERNEL);
if (err != 0)
- dbg("%s - submit indat urb failed %d", __FUNCTION__,
+ dbg("%s - submit indat urb failed %d", __func__,
err);
}
struct keyspan_serial_private *s_priv;
struct keyspan_port_private *p_priv;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
s_priv = usb_get_serial_data(serial);
2000);
if (result < 0)
dbg("%s - error %d from usb_control_msg",
- __FUNCTION__, result);
+ __func__, result);
}
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
default:
dbg("%s - nonzero urb status received: %d",
- __FUNCTION__, status);
+ __func__, status);
goto exit;
}
retval = usb_submit_urb (urb, GFP_ATOMIC);
if (retval)
err ("%s - usb_submit_urb failed with result %d",
- __FUNCTION__, retval);
+ __func__, retval);
}
value, 0, NULL, 0, 2000);
if (result < 0)
dbg("%s - error %d from usb_control_msg",
- __FUNCTION__, result);
+ __func__, result);
/* there is something funky about this.. the TCSBRK that 'cu' performs
ought to translate into a break_ctl(-1),break_ctl(0) pair HZ/4
seconds apart, but it feels like the break sent isn't as long as it
1,
2000);
if (rc < 0) {
- dbg("%s - roomquery failed", __FUNCTION__);
+ dbg("%s - roomquery failed", __func__);
goto error;
}
if (rc == 0) {
- dbg("%s - roomquery returned 0 bytes", __FUNCTION__);
+ dbg("%s - roomquery returned 0 bytes", __func__);
rc = -EIO;
goto error;
}
port->interrupt_in_urb->dev = serial->dev;
rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (rc) {
- dbg("%s - usb_submit_urb(read int) failed", __FUNCTION__);
+ dbg("%s - usb_submit_urb(read int) failed", __func__);
goto error;
}
record = &xircom_pgs_firmware[0];
#endif
if (record == NULL) {
- err("%s: unknown vendor, aborting.", __FUNCTION__);
+ err("%s: unknown vendor, aborting.", __func__);
return -ENODEV;
}
static void keyspan_pda_shutdown (struct usb_serial *serial)
{
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
kfree(usb_get_serial_port_data(serial->port[0]));
}
if (rc < 0)
err("Change port settings failed (error = %d)", rc);
info("%s - %d byte block, baudrate %x, databits %d, u1 %d, u2 %d",
- __FUNCTION__,
+ __func__,
settings->pktlen,
settings->baudrate, settings->databits,
settings->unknown1, settings->unknown2);
__u8 status_buf[KLSI_STATUSBUF_LEN] = { -1,-1};
__u16 status;
- info("%s - sending SIO Poll request", __FUNCTION__);
+ info("%s - sending SIO Poll request", __func__);
rc = usb_control_msg(port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0),
KL5KUSB105A_SIO_POLL,
else {
status = le16_to_cpu(*(u16 *)status_buf);
- info("%s - read status %x %x", __FUNCTION__,
+ info("%s - read status %x %x", __func__,
status_buf[0], status_buf[1]);
*line_state_p = klsi_105_status2linestate(status);
priv = kmalloc(sizeof(struct klsi_105_private),
GFP_KERNEL);
if (!priv) {
- dbg("%skmalloc for klsi_105_private failed.", __FUNCTION__);
+ dbg("%skmalloc for klsi_105_private failed.", __func__);
i--;
goto err_cleanup;
}
urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE,
GFP_KERNEL);
if (!urb->transfer_buffer) {
- err("%s - out of memory for urb buffers.", __FUNCTION__);
+ err("%s - out of memory for urb buffers.", __func__);
goto err_cleanup;
}
}
{
int i;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/* stop reads and writes on all ports */
for (i=0; i < serial->num_ports; ++i) {
struct klsi_105_port_settings cfg;
unsigned long flags;
- dbg("%s port %d", __FUNCTION__, port->number);
+ dbg("%s port %d", __func__, port->number);
/* force low_latency on so that our tty_push actually forces
* the data through
rc = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (rc) {
- err("%s - failed submitting read urb, error %d", __FUNCTION__, rc);
+ err("%s - failed submitting read urb, error %d", __func__, rc);
retval = rc;
goto exit;
}
err("Enabling read failed (error = %d)", rc);
retval = rc;
} else
- dbg("%s - enabled reading", __FUNCTION__);
+ dbg("%s - enabled reading", __func__);
rc = klsi_105_get_line_state(port, &line_state);
if (rc >= 0) {
spin_lock_irqsave (&priv->lock, flags);
priv->line_state = line_state;
spin_unlock_irqrestore (&priv->lock, flags);
- dbg("%s - read line state 0x%lx", __FUNCTION__, line_state);
+ dbg("%s - read line state 0x%lx", __func__, line_state);
retval = 0;
} else
retval = rc;
struct klsi_105_private *priv = usb_get_serial_port_data(port);
int rc;
- dbg("%s port %d", __FUNCTION__, port->number);
+ dbg("%s port %d", __func__, port->number);
mutex_lock(&port->serial->disc_mutex);
if (!port->serial->disconnected) {
int result, size;
int bytes_sent=0;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
while (count > 0) {
/* try to find a free urb (write 0 bytes if none) */
for (i=0; i<NUM_URBS; i++) {
if (priv->write_urb_pool[i]->status != -EINPROGRESS) {
urb = priv->write_urb_pool[i];
- dbg("%s - using pool URB %d", __FUNCTION__, i);
+ dbg("%s - using pool URB %d", __func__, i);
break;
}
}
spin_unlock_irqrestore (&priv->lock, flags);
if (urb==NULL) {
- dbg("%s - no more free urbs", __FUNCTION__);
+ dbg("%s - no more free urbs", __func__);
goto exit;
}
if (urb->transfer_buffer == NULL) {
urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC);
if (urb->transfer_buffer == NULL) {
- err("%s - no more kernel memory...", __FUNCTION__);
+ err("%s - no more kernel memory...", __func__);
goto exit;
}
}
/* send the data out the bulk port */
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result) {
- err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
+ err("%s - failed submitting write urb, error %d", __func__, result);
goto exit;
}
buf += size;
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (status) {
- dbg("%s - nonzero write bulk status received: %d", __FUNCTION__,
+ dbg("%s - nonzero write bulk status received: %d", __func__,
status);
return;
}
spin_unlock_irqrestore (&priv->lock, flags);
- dbg("%s - returns %d", __FUNCTION__, chars);
+ dbg("%s - returns %d", __func__, chars);
return (chars);
}
spin_unlock_irqrestore (&priv->lock, flags);
- dbg("%s - returns %d", __FUNCTION__, room);
+ dbg("%s - returns %d", __func__, room);
return (room);
}
int rc;
int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* The urb might have been killed. */
if (status) {
- dbg("%s - nonzero read bulk status received: %d", __FUNCTION__,
+ dbg("%s - nonzero read bulk status received: %d", __func__,
status);
return;
}
*/
if (urb->actual_length == 0) {
/* empty urbs seem to happen, we ignore them */
- /* dbg("%s - emtpy URB", __FUNCTION__); */
+ /* dbg("%s - emtpy URB", __func__); */
;
} else if (urb->actual_length <= 2) {
- dbg("%s - size %d URB not understood", __FUNCTION__,
+ dbg("%s - size %d URB not understood", __func__,
urb->actual_length);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
+ usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, data);
} else {
int bytes_sent = ((__u8 *) data)[0] +
* intermixed tty_flip_buffer_push()s
* FIXME
*/
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
+ usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, data);
if (bytes_sent + 2 > urb->actual_length) {
dbg("%s - trying to read more data than available"
- " (%d vs. %d)", __FUNCTION__,
+ " (%d vs. %d)", __func__,
bytes_sent+2, urb->actual_length);
/* cap at implied limit */
bytes_sent = urb->actual_length - 2;
port);
rc = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (rc)
- err("%s - failed resubmitting read urb, error %d", __FUNCTION__, rc);
+ err("%s - failed resubmitting read urb, error %d", __func__, rc);
} /* klsi_105_read_bulk_callback */
if( (cflag & CBAUD) != (old_cflag & CBAUD) ) {
/* reassert DTR and (maybe) RTS on transition from B0 */
if( (old_cflag & CBAUD) == B0 ) {
- dbg("%s: baud was B0", __FUNCTION__);
+ dbg("%s: baud was B0", __func__);
#if 0
priv->control_state |= TIOCM_DTR;
/* don't set RTS if using hardware flow control */
break;
}
if ((cflag & CBAUD) == B0 ) {
- dbg("%s: baud is B0", __FUNCTION__);
+ dbg("%s: baud is B0", __func__);
/* Drop RTS and DTR */
/* maybe this should be simulated by sending read
* disable and read enable messages?
/* set the number of data bits */
switch (cflag & CSIZE) {
case CS5:
- dbg("%s - 5 bits/byte not supported", __FUNCTION__);
+ dbg("%s - 5 bits/byte not supported", __func__);
spin_unlock_irqrestore (&priv->lock, flags);
return ;
case CS6:
- dbg("%s - 6 bits/byte not supported", __FUNCTION__);
+ dbg("%s - 6 bits/byte not supported", __func__);
spin_unlock_irqrestore (&priv->lock, flags);
return ;
case CS7:
struct mct_u232_private *priv = (struct mct_u232_private *)port->private;
unsigned char lcr = priv->last_lcr;
- dbg("%sstate=%d", __FUNCTION__, break_state);
+ dbg("%sstate=%d", __func__, break_state);
if (break_state)
lcr |= MCT_U232_SET_BREAK;
unsigned long flags;
int rc;
unsigned long line_state;
- dbg("%s - request, just guessing", __FUNCTION__);
+ dbg("%s - request, just guessing", __func__);
rc = klsi_105_get_line_state(port, &line_state);
if (rc < 0) {
spin_lock_irqsave (&priv->lock, flags);
priv->line_state = line_state;
spin_unlock_irqrestore (&priv->lock, flags);
- dbg("%s - read line state 0x%lx", __FUNCTION__, line_state);
+ dbg("%s - read line state 0x%lx", __func__, line_state);
return (int)line_state;
}
{
int retval = -EINVAL;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/* if this ever gets implemented, it should be done something like this:
struct usb_serial *serial = port->serial;
static void klsi_105_throttle (struct usb_serial_port *port)
{
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
usb_kill_urb(port->read_urb);
}
{
int result;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
port->read_urb->dev = port->serial->dev;
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- err("%s - failed submitting read urb, error %d", __FUNCTION__,
+ err("%s - failed submitting read urb, error %d", __func__,
result);
}
for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
endpoint = &altsetting->endpoint[i];
if (usb_endpoint_is_int_out(&endpoint->desc)) {
- dbg("%s Found interrupt out endpoint. Address: %d", __FUNCTION__, endpoint->desc.bEndpointAddress);
+ dbg("%s Found interrupt out endpoint. Address: %d", __func__, endpoint->desc.bEndpointAddress);
priv->write_int_endpoint_address = endpoint->desc.bEndpointAddress;
}
if (usb_endpoint_is_int_in(&endpoint->desc)) {
- dbg("%s Found interrupt in endpoint. Address: %d", __FUNCTION__, endpoint->desc.bEndpointAddress);
+ dbg("%s Found interrupt in endpoint. Address: %d", __func__, endpoint->desc.bEndpointAddress);
priv->read_int_endpoint_address = endpoint->desc.bEndpointAddress;
}
}
static void kobil_shutdown (struct usb_serial *serial)
{
int i;
- dbg("%s - port %d", __FUNCTION__, serial->port[0]->number);
+ dbg("%s - port %d", __func__, serial->port[0]->number);
for (i=0; i < serial->num_ports; ++i) {
while (serial->port[i]->open_count > 0) {
int transfer_buffer_length = 8;
int write_urb_transfer_buffer_length = 8;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
priv = usb_get_serial_port_data(port);
// someone sets the dev to 0 if the close method has been called
// allocate write_urb
if (!port->write_urb) {
- dbg("%s - port %d Allocating port->write_urb", __FUNCTION__, port->number);
+ dbg("%s - port %d Allocating port->write_urb", __func__, port->number);
port->write_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!port->write_urb) {
- dbg("%s - port %d usb_alloc_urb failed", __FUNCTION__, port->number);
+ dbg("%s - port %d usb_alloc_urb failed", __func__, port->number);
kfree(transfer_buffer);
return -ENOMEM;
}
transfer_buffer_length,
KOBIL_TIMEOUT
);
- dbg("%s - port %d Send get_HW_version URB returns: %i", __FUNCTION__, port->number, result);
+ dbg("%s - port %d Send get_HW_version URB returns: %i", __func__, port->number, result);
dbg("Harware version: %i.%i.%i", transfer_buffer[0], transfer_buffer[1], transfer_buffer[2] );
// get firmware version
transfer_buffer_length,
KOBIL_TIMEOUT
);
- dbg("%s - port %d Send get_FW_version URB returns: %i", __FUNCTION__, port->number, result);
+ dbg("%s - port %d Send get_FW_version URB returns: %i", __func__, port->number, result);
dbg("Firmware version: %i.%i.%i", transfer_buffer[0], transfer_buffer[1], transfer_buffer[2] );
if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID || priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) {
0,
KOBIL_TIMEOUT
);
- dbg("%s - port %d Send set_baudrate URB returns: %i", __FUNCTION__, port->number, result);
+ dbg("%s - port %d Send set_baudrate URB returns: %i", __func__, port->number, result);
// reset all queues
result = usb_control_msg( port->serial->dev,
0,
KOBIL_TIMEOUT
);
- dbg("%s - port %d Send reset_all_queues URB returns: %i", __FUNCTION__, port->number, result);
+ dbg("%s - port %d Send reset_all_queues URB returns: %i", __func__, port->number, result);
}
if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID ||
priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) {
// start reading (Adapter B 'cause PNP string)
result = usb_submit_urb( port->interrupt_in_urb, GFP_ATOMIC );
- dbg("%s - port %d Send read URB returns: %i", __FUNCTION__, port->number, result);
+ dbg("%s - port %d Send read URB returns: %i", __func__, port->number, result);
}
kfree(transfer_buffer);
static void kobil_close (struct usb_serial_port *port, struct file *filp)
{
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (port->write_urb) {
usb_kill_urb(port->write_urb);
int status = urb->status;
// char *dbg_data;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (status) {
dbg("%s - port %d Read int status not zero: %d",
- __FUNCTION__, port->number, status);
+ __func__, port->number, status);
return;
}
port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
- dbg("%s - port %d Send read URB returns: %i", __FUNCTION__, port->number, result);
+ dbg("%s - port %d Send read URB returns: %i", __func__, port->number, result);
}
struct kobil_private * priv;
if (count == 0) {
- dbg("%s - port %d write request of 0 bytes", __FUNCTION__, port->number);
+ dbg("%s - port %d write request of 0 bytes", __func__, port->number);
return 0;
}
priv = usb_get_serial_port_data(port);
if (count > (KOBIL_BUF_LENGTH - priv->filled)) {
- dbg("%s - port %d Error: write request bigger than buffer size", __FUNCTION__, port->number);
+ dbg("%s - port %d Error: write request bigger than buffer size", __func__, port->number);
return -ENOMEM;
}
// Copy data to buffer
memcpy (priv->buf + priv->filled, buf, count);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, priv->buf + priv->filled);
+ usb_serial_debug_data(debug, &port->dev, __func__, count, priv->buf + priv->filled);
priv->filled = priv->filled + count;
priv->cur_pos = priv->cur_pos + length;
result = usb_submit_urb( port->write_urb, GFP_NOIO );
- dbg("%s - port %d Send write URB returns: %i", __FUNCTION__, port->number, result);
+ dbg("%s - port %d Send write URB returns: %i", __func__, port->number, result);
todo = priv->filled - priv->cur_pos;
if (todo > 0) {
port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb( port->interrupt_in_urb, GFP_NOIO );
- dbg("%s - port %d Send read URB returns: %i", __FUNCTION__, port->number, result);
+ dbg("%s - port %d Send read URB returns: %i", __func__, port->number, result);
}
}
return count;
static int kobil_write_room (struct usb_serial_port *port)
{
- //dbg("%s - port %d", __FUNCTION__, port->number);
+ //dbg("%s - port %d", __func__, port->number);
return 8;
}
KOBIL_TIMEOUT);
dbg("%s - port %d Send get_status_line_state URB returns: %i. Statusline: %02x",
- __FUNCTION__, port->number, result, transfer_buffer[0]);
+ __func__, port->number, result, transfer_buffer[0]);
result = 0;
if ((transfer_buffer[0] & SUSBCR_GSL_DSR) != 0)
if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) {
if (dtr != 0)
- dbg("%s - port %d Setting DTR", __FUNCTION__, port->number);
+ dbg("%s - port %d Setting DTR", __func__, port->number);
else
- dbg("%s - port %d Clearing DTR", __FUNCTION__, port->number);
+ dbg("%s - port %d Clearing DTR", __func__, port->number);
result = usb_control_msg( port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0 ),
SUSBCRequest_SetStatusLinesOrQueues,
KOBIL_TIMEOUT);
} else {
if (rts != 0)
- dbg("%s - port %d Setting RTS", __FUNCTION__, port->number);
+ dbg("%s - port %d Setting RTS", __func__, port->number);
else
- dbg("%s - port %d Clearing RTS", __FUNCTION__, port->number);
+ dbg("%s - port %d Clearing RTS", __func__, port->number);
result = usb_control_msg( port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0 ),
SUSBCRequest_SetStatusLinesOrQueues,
0,
KOBIL_TIMEOUT);
}
- dbg("%s - port %d Send set_status_line URB returns: %i", __FUNCTION__, port->number, result);
+ dbg("%s - port %d Send set_status_line URB returns: %i", __func__, port->number, result);
kfree(transfer_buffer);
return (result < 0) ? result : 0;
}
KOBIL_TIMEOUT
);
- dbg("%s - port %d Send reset_all_queues (FLUSH) URB returns: %i", __FUNCTION__, port->number, result);
+ dbg("%s - port %d Send reset_all_queues (FLUSH) URB returns: %i", __func__, port->number, result);
kfree(transfer_buffer);
return (result < 0) ? -EFAULT : 0;
default:
struct mct_u232_private *priv;
int i;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
for (i=0; i < serial->num_ports; ++i) {
/* My special items, the standard routines free my urbs */
unsigned char last_lcr;
unsigned char last_msr;
- dbg("%s port %d", __FUNCTION__, port->number);
+ dbg("%s port %d", __func__, port->number);
/* Compensate for a hardware bug: although the Sitecom U232-P25
* device reports a maximum output packet size of 32 bytes,
unsigned int c_cflag;
unsigned int control_state;
struct mct_u232_private *priv = usb_get_serial_port_data(port);
- dbg("%s port %d", __FUNCTION__, port->number);
+ dbg("%s port %d", __func__, port->number);
if (port->tty) {
c_cflag = port->tty->termios->c_cflag;
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
default:
dbg("%s - nonzero urb status received: %d",
- __FUNCTION__, status);
+ __func__, status);
goto exit;
}
if (!serial) {
- dbg("%s - bad serial pointer, exiting", __FUNCTION__);
+ dbg("%s - bad serial pointer, exiting", __func__);
return;
}
- dbg("%s - port %d", __FUNCTION__, port->number);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+ dbg("%s - port %d", __func__, port->number);
+ usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
/*
* Work-a-round: handle the 'usual' bulk-in pipe here
retval = usb_submit_urb (urb, GFP_ATOMIC);
if (retval)
err ("%s - usb_submit_urb failed with result %d",
- __FUNCTION__, retval);
+ __func__, retval);
} /* mct_u232_read_int_callback */
static void mct_u232_set_termios (struct usb_serial_port *port,
/* reassert DTR and RTS on transition from B0 */
if ((old_cflag & CBAUD) == B0) {
- dbg("%s: baud was B0", __FUNCTION__);
+ dbg("%s: baud was B0", __func__);
control_state |= TIOCM_DTR | TIOCM_RTS;
mct_u232_set_modem_ctrl(serial, control_state);
}
mct_u232_set_baud_rate(serial, port, tty_get_baud_rate(port->tty));
if ((cflag & CBAUD) == B0 ) {
- dbg("%s: baud is B0", __FUNCTION__);
+ dbg("%s: baud is B0", __func__);
/* Drop RTS and DTR */
control_state &= ~(TIOCM_DTR | TIOCM_RTS);
mct_u232_set_modem_ctrl(serial, control_state);
unsigned char lcr;
unsigned long flags;
- dbg("%sstate=%d", __FUNCTION__, break_state);
+ dbg("%sstate=%d", __func__, break_state);
spin_lock_irqsave(&priv->lock, flags);
lcr = priv->last_lcr;
unsigned int control_state;
unsigned long flags;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
spin_lock_irqsave(&priv->lock, flags);
control_state = priv->control_state;
unsigned int control_state;
unsigned long flags;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
spin_lock_irqsave(&priv->lock, flags);
control_state = priv->control_state;
static int mct_u232_ioctl (struct usb_serial_port *port, struct file * file,
unsigned int cmd, unsigned long arg)
{
- dbg("%scmd=0x%x", __FUNCTION__, cmd);
+ dbg("%scmd=0x%x", __func__, cmd);
/* Based on code from acm.c and others */
switch (cmd) {
return 0;
default:
- dbg("%s: arg not supported - 0x%04x", __FUNCTION__,cmd);
+ dbg("%s: arg not supported - 0x%04x", __func__,cmd);
return(-ENOIOCTLCMD);
break;
}
struct tty_struct *tty;
tty = port->tty;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
priv->rx_flags |= THROTTLED;
unsigned int control_state;
struct tty_struct *tty;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
tty = port->tty;
spin_lock_irqsave(&priv->lock, flags);
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __FUNCTION__,
+ dbg("%s - urb shutting down with status: %d", __func__,
status);
return;
default:
- dbg("%s - nonzero urb status received: %d", __FUNCTION__,
+ dbg("%s - nonzero urb status received: %d", __func__,
status);
goto exit;
}
if (result)
dev_err(&urb->dev->dev,
"%s - Error %d submitting control urb\n",
- __FUNCTION__, result);
+ __func__, result);
return;
}
port = mos7720_port->port;
- dbg("Entering...%s", __FUNCTION__);
+ dbg("Entering...%s", __func__);
data = urb->transfer_buffer;
urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
GFP_KERNEL);
if (!urb->transfer_buffer) {
- err("%s-out of memory for urb buffers.", __FUNCTION__);
+ err("%s-out of memory for urb buffers.", __func__);
usb_free_urb(mos7720_port->write_urb_pool[j]);
mos7720_port->write_urb_pool[j] = NULL;
continue;
if (response)
dev_err(&port->dev,
"%s - Error %d submitting control urb\n",
- __FUNCTION__, response);
+ __func__, response);
}
/* set up our bulk in urb */
response = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (response)
dev_err(&port->dev,
- "%s - Error %d submitting read urb\n", __FUNCTION__, response);
+ "%s - Error %d submitting read urb\n", __func__, response);
/* initialize our icount structure */
memset(&(mos7720_port->icount), 0x00, sizeof(mos7720_port->icount));
int chars = 0;
struct moschip_port *mos7720_port;
- dbg("%s:entering ...........", __FUNCTION__);
+ dbg("%s:entering ...........", __func__);
mos7720_port = usb_get_serial_port_data(port);
if (mos7720_port == NULL) {
- dbg("%s:leaving ...........", __FUNCTION__);
+ dbg("%s:leaving ...........", __func__);
return -ENODEV;
}
if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status == -EINPROGRESS)
chars += URB_TRANSFER_BUFFER_SIZE;
}
- dbg("%s - returns %d", __FUNCTION__, chars);
+ dbg("%s - returns %d", __func__, chars);
return chars;
}
mutex_unlock(&serial->disc_mutex);
mos7720_port->open = 0;
- dbg("Leaving %s", __FUNCTION__);
+ dbg("Leaving %s", __func__);
}
static void mos7720_break(struct usb_serial_port *port, int break_state)
struct usb_serial *serial;
struct moschip_port *mos7720_port;
- dbg("Entering %s", __FUNCTION__);
+ dbg("Entering %s", __func__);
serial = port->serial;
int room = 0;
int i;
- dbg("%s:entering ...........", __FUNCTION__);
+ dbg("%s:entering ...........", __func__);
mos7720_port = usb_get_serial_port_data(port);
if (mos7720_port == NULL) {
- dbg("%s:leaving ...........", __FUNCTION__);
+ dbg("%s:leaving ...........", __func__);
return -ENODEV;
}
room += URB_TRANSFER_BUFFER_SIZE;
}
- dbg("%s - returns %d", __FUNCTION__, room);
+ dbg("%s - returns %d", __func__, room);
return room;
}
struct urb *urb;
const unsigned char *current_position = data;
- dbg("%s:entering ...........", __FUNCTION__);
+ dbg("%s:entering ...........", __func__);
serial = port->serial;
}
if (urb == NULL) {
- dbg("%s - no more free urbs", __FUNCTION__);
+ dbg("%s - no more free urbs", __func__);
goto exit;
}
urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
GFP_KERNEL);
if (urb->transfer_buffer == NULL) {
- err("%s no more kernel memory...", __FUNCTION__);
+ err("%s no more kernel memory...", __func__);
goto exit;
}
}
transfer_size = min (count, URB_TRANSFER_BUFFER_SIZE);
memcpy(urb->transfer_buffer, current_position, transfer_size);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, transfer_size,
+ usb_serial_debug_data(debug, &port->dev, __func__, transfer_size,
urb->transfer_buffer);
/* fill urb with data and submit */
status = usb_submit_urb(urb,GFP_ATOMIC);
if (status) {
err("%s - usb_submit_urb(write bulk) failed with status = %d",
- __FUNCTION__, status);
+ __func__, status);
bytes_sent = status;
goto exit;
}
struct tty_struct *tty;
int status;
- dbg("%s- port %d\n", __FUNCTION__, port->number);
+ dbg("%s- port %d\n", __func__, port->number);
mos7720_port = usb_get_serial_port_data(port);
return;
}
- dbg("%s: Entering ..........", __FUNCTION__);
+ dbg("%s: Entering ..........", __func__);
tty = port->tty;
if (!tty) {
- dbg("%s - no tty available", __FUNCTION__);
+ dbg("%s - no tty available", __func__);
return;
}
return;
if (!mos7720_port->open) {
- dbg("%s - port not opened", __FUNCTION__);
+ dbg("%s - port not opened", __func__);
return;
}
- dbg("%s: Entering ..........", __FUNCTION__);
+ dbg("%s: Entering ..........", __func__);
tty = port->tty;
if (!tty) {
- dbg("%s - no tty available", __FUNCTION__);
+ dbg("%s - no tty available", __func__);
return;
}
__u16 round;
- dbg("%s - %d", __FUNCTION__, baudrate);
+ dbg("%s - %d", __func__, baudrate);
for (i = 0; i < ARRAY_SIZE(divisor_table); i++) {
if (divisor_table[i].baudrate == baudrate) {
port = mos7720_port->port;
serial = port->serial;
- dbg("%s: Entering ..........", __FUNCTION__);
+ dbg("%s: Entering ..........", __func__);
number = port->number - port->serial->minor;
- dbg("%s - port = %d, baud = %d", __FUNCTION__, port->number, baudrate);
+ dbg("%s - port = %d, baud = %d", __func__, port->number, baudrate);
/* Calculate the Divisor */
status = calc_baud_rate_divisor(baudrate, &divisor);
if (status) {
- err("%s - bad baud rate", __FUNCTION__);
+ err("%s - bad baud rate", __func__);
return status;
}
serial = port->serial;
port_number = port->number - port->serial->minor;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (!mos7720_port->open) {
- dbg("%s - port not opened", __FUNCTION__);
+ dbg("%s - port not opened", __func__);
return;
}
tty = mos7720_port->port->tty;
- dbg("%s: Entering ..........", __FUNCTION__);
+ dbg("%s: Entering ..........", __func__);
lData = UART_LCR_WLEN8;
lStop = 0x00; /* 1 stop bit */
if (cflag & PARENB) {
if (cflag & PARODD) {
lParity = UART_LCR_PARITY;
- dbg("%s - parity = odd", __FUNCTION__);
+ dbg("%s - parity = odd", __func__);
} else {
lParity = (UART_LCR_EPAR | UART_LCR_PARITY);
- dbg("%s - parity = even", __FUNCTION__);
+ dbg("%s - parity = even", __func__);
}
} else {
- dbg("%s - parity = none", __FUNCTION__);
+ dbg("%s - parity = none", __func__);
}
if (cflag & CMSPAR)
/* Change the Stop bit */
if (cflag & CSTOPB) {
lStop = UART_LCR_STOP;
- dbg("%s - stop bits = 2", __FUNCTION__);
+ dbg("%s - stop bits = 2", __func__);
} else {
lStop = 0x00;
- dbg("%s - stop bits = 1", __FUNCTION__);
+ dbg("%s - stop bits = 1", __func__);
}
#define LCR_BITS_MASK 0x03 /* Mask for bits/char field */
return;
}
- dbg("%s - baud rate = %d", __FUNCTION__, baud);
+ dbg("%s - baud rate = %d", __func__, baud);
status = send_cmd_write_baud_rate(mos7720_port, baud);
/* FIXME: needs to write actual resulting baud back not just
blindly do so */
if (!mos7720_port->open) {
- dbg("%s - port not opened", __FUNCTION__);
+ dbg("%s - port not opened", __func__);
return;
}
cflag = tty->termios->c_cflag;
- dbg("%s - cflag %08x iflag %08x", __FUNCTION__,
+ dbg("%s - cflag %08x iflag %08x", __func__,
tty->termios->c_cflag,
RELEVANT_IFLAG(tty->termios->c_iflag));
- dbg("%s - old cflag %08x old iflag %08x", __FUNCTION__,
+ dbg("%s - old cflag %08x old iflag %08x", __func__,
old_termios->c_cflag,
RELEVANT_IFLAG(old_termios->c_iflag));
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* change the port settings to the new ones specified */
change_port_settings(mos7720_port, old_termios);
count = mos7720_chars_in_buffer(mos7720_port->port);
if (count == 0) {
- dbg("%s -- Empty", __FUNCTION__);
+ dbg("%s -- Empty", __func__);
result = TIOCSER_TEMT;
}
result = tty->read_cnt;
- dbg("%s(%d) = %d", __FUNCTION__, mos7720_port->port->number, result);
+ dbg("%s(%d) = %d", __func__, mos7720_port->port->number, result);
if (copy_to_user(value, &result, sizeof(int)))
return -EFAULT;
| ((msr & UART_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */
- dbg("%s -- %x", __FUNCTION__, result);
+ dbg("%s -- %x", __func__, result);
if (copy_to_user(value, &result, sizeof(int)))
return -EFAULT;
if (mos7720_port == NULL)
return -ENODEV;
- dbg("%s - port %d, cmd = 0x%x", __FUNCTION__, port->number, cmd);
+ dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
switch (cmd) {
case TIOCINQ:
/* return number of bytes available */
- dbg("%s (%d) TIOCINQ", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCINQ", __func__, port->number);
return get_number_bytes_avail(mos7720_port,
(unsigned int __user *)arg);
break;
case TIOCSERGETLSR:
- dbg("%s (%d) TIOCSERGETLSR", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
return get_lsr_info(mos7720_port, (unsigned int __user *)arg);
return 0;
case TIOCMBIS:
case TIOCMBIC:
case TIOCMSET:
- dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __FUNCTION__,
+ dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __func__,
port->number);
return set_modem_info(mos7720_port, cmd,
(unsigned int __user *)arg);
case TIOCMGET:
- dbg("%s (%d) TIOCMGET", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCMGET", __func__, port->number);
return get_modem_info(mos7720_port,
(unsigned int __user *)arg);
case TIOCGSERIAL:
- dbg("%s (%d) TIOCGSERIAL", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
return get_serial_info(mos7720_port,
(struct serial_struct __user *)arg);
case TIOCSSERIAL:
- dbg("%s (%d) TIOCSSERIAL", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCSSERIAL", __func__, port->number);
break;
case TIOCMIWAIT:
- dbg("%s (%d) TIOCMIWAIT", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
cprev = mos7720_port->icount;
while (1) {
if (signal_pending(current))
icount.brk = cnow.brk;
icount.buf_overrun = cnow.buf_overrun;
- dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__,
+ dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
port->number, icount.rx, icount.tx );
if (copy_to_user((void __user *)arg, &icount, sizeof(icount)))
return -EFAULT;
int i;
char data;
- dbg("%s: Entering ..........", __FUNCTION__);
+ dbg("%s: Entering ..........", __func__);
if (!serial) {
dbg("Invalid Handler");
/* create our private serial structure */
mos7720_serial = kzalloc(sizeof(struct moschip_serial), GFP_KERNEL);
if (mos7720_serial == NULL) {
- err("%s - Out of memory", __FUNCTION__);
+ err("%s - Out of memory", __func__);
return -ENOMEM;
}
for (i = 0; i < serial->num_ports; ++i) {
mos7720_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
if (mos7720_port == NULL) {
- err("%s - Out of memory", __FUNCTION__);
+ err("%s - Out of memory", __func__);
usb_set_serial_data(serial, NULL);
kfree(mos7720_serial);
return -ENOMEM;
{
int retval;
- dbg("%s: Entering ..........", __FUNCTION__);
+ dbg("%s: Entering ..........", __func__);
/* Register with the usb serial */
retval = usb_serial_register(&moschip7720_2port_driver);
{
struct async_icount *icount;
- dbg("%s - %02x", __FUNCTION__, new_lsr);
+ dbg("%s - %02x", __func__, new_lsr);
if (new_lsr & SERIAL_LSR_BI) {
//
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __FUNCTION__,
+ dbg("%s - urb shutting down with status: %d", __func__,
status);
return;
default:
- dbg("%s - nonzero urb status received: %d", __FUNCTION__,
+ dbg("%s - nonzero urb status received: %d", __func__,
status);
goto exit;
}
- dbg("%s urb buffer size is %d\n", __FUNCTION__, urb->actual_length);
- dbg("%s mos7840_port->MsrLsr is %d port %d\n", __FUNCTION__,
+ dbg("%s urb buffer size is %d\n", __func__, urb->actual_length);
+ dbg("%s mos7840_port->MsrLsr is %d port %d\n", __func__,
mos7840_port->MsrLsr, mos7840_port->port_num);
data = urb->transfer_buffer;
regval = (__u8) data[0];
- dbg("%s data is %x\n", __FUNCTION__, regval);
+ dbg("%s data is %x\n", __func__, regval);
if (mos7840_port->MsrLsr == 0)
mos7840_handle_new_msr(mos7840_port, regval);
else if (mos7840_port->MsrLsr == 1)
if (result) {
dev_err(&urb->dev->dev,
"%s - Error %d submitting interrupt urb\n",
- __FUNCTION__, result);
+ __func__, result);
}
}
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __FUNCTION__,
+ dbg("%s - urb shutting down with status: %d", __func__,
status);
return;
default:
- dbg("%s - nonzero urb status received: %d", __FUNCTION__,
+ dbg("%s - nonzero urb status received: %d", __func__,
status);
goto exit;
}
if (result) {
dev_err(&urb->dev->dev,
"%s - Error %d submitting interrupt urb\n",
- __FUNCTION__, result);
+ __func__, result);
}
}
}
port = (struct usb_serial_port *)mos7840_port->port;
- if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ if (mos7840_port_paranoia_check(port, __func__)) {
dbg("%s", "Port Paranoia failed \n");
return;
}
- serial = mos7840_get_usb_serial(port, __FUNCTION__);
+ serial = mos7840_get_usb_serial(port, __func__);
if (!serial) {
dbg("%s\n", "Bad serial pointer ");
return;
return;
}
- if (mos7840_port_paranoia_check(mos7840_port->port, __FUNCTION__)) {
+ if (mos7840_port_paranoia_check(mos7840_port->port, __func__)) {
dbg("%s", "Port Paranoia failed \n");
return;
}
struct moschip_port *mos7840_port;
struct moschip_port *port0;
- if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ if (mos7840_port_paranoia_check(port, __func__)) {
dbg("%s", "Port Paranoia failed \n");
return -ENODEV;
}
serial = port->serial;
- if (mos7840_serial_paranoia_check(serial, __FUNCTION__)) {
+ if (mos7840_serial_paranoia_check(serial, __func__)) {
dbg("%s", "Serial Paranoia failed \n");
return -ENODEV;
}
if (!urb->transfer_buffer) {
usb_free_urb(urb);
mos7840_port->write_urb_pool[j] = NULL;
- err("%s-out of memory for urb buffers.", __FUNCTION__);
+ err("%s-out of memory for urb buffers.", __func__);
continue;
}
}
GFP_KERNEL);
if (response) {
err("%s - Error %d submitting interrupt urb",
- __FUNCTION__, response);
+ __func__, response);
}
}
port->bulk_in_endpointAddress);
response = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL);
if (response) {
- err("%s - Error %d submitting control urb", __FUNCTION__,
+ err("%s - Error %d submitting control urb", __func__,
response);
}
dbg("%s \n", " mos7840_chars_in_buffer:entering ...........");
- if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ if (mos7840_port_paranoia_check(port, __func__)) {
dbg("%s", "Invalid port \n");
return -1;
}
}
}
spin_unlock_irqrestore(&mos7840_port->pool_lock,flags);
- dbg("%s - returns %d", __FUNCTION__, chars);
+ dbg("%s - returns %d", __func__, chars);
return chars;
}
/* No activity.. count down section */
wait--;
if (wait == 0) {
- dbg("%s - TIMEOUT", __FUNCTION__);
+ dbg("%s - TIMEOUT", __func__);
return;
} else {
/* Reset timeout value back to seconds */
dbg("%s\n", "mos7840_close:entering...");
- if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ if (mos7840_port_paranoia_check(port, __func__)) {
dbg("%s", "Port Paranoia failed \n");
return;
}
- serial = mos7840_get_usb_serial(port, __FUNCTION__);
+ serial = mos7840_get_usb_serial(port, __func__);
if (!serial) {
dbg("%s", "Serial Paranoia failed \n");
return;
/* No activity.. count down section */
wait--;
if (wait == 0) {
- dbg("%s - TIMEOUT", __FUNCTION__);
+ dbg("%s - TIMEOUT", __func__);
return;
} else {
/* Reset timeout value back to seconds */
dbg("%s \n", "Entering ...........");
dbg("mos7840_break: Start\n");
- if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ if (mos7840_port_paranoia_check(port, __func__)) {
dbg("%s", "Port Paranoia failed \n");
return;
}
- serial = mos7840_get_usb_serial(port, __FUNCTION__);
+ serial = mos7840_get_usb_serial(port, __func__);
if (!serial) {
dbg("%s", "Serial Paranoia failed \n");
return;
dbg("%s \n", " mos7840_write_room:entering ...........");
- if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ if (mos7840_port_paranoia_check(port, __func__)) {
dbg("%s", "Invalid port \n");
dbg("%s \n", " mos7840_write_room:leaving ...........");
return -1;
spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
room = (room == 0) ? 0 : room - URB_TRANSFER_BUFFER_SIZE + 1;
- dbg("%s - returns %d", __FUNCTION__, room);
+ dbg("%s - returns %d", __func__, room);
return room;
}
status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
#endif
- if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ if (mos7840_port_paranoia_check(port, __func__)) {
dbg("%s", "Port Paranoia failed \n");
return -1;
}
serial = port->serial;
- if (mos7840_serial_paranoia_check(serial, __FUNCTION__)) {
+ if (mos7840_serial_paranoia_check(serial, __func__)) {
dbg("%s", "Serial Paranoia failed \n");
return -1;
}
spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
if (urb == NULL) {
- dbg("%s - no more free urbs", __FUNCTION__);
+ dbg("%s - no more free urbs", __func__);
goto exit;
}
kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
if (urb->transfer_buffer == NULL) {
- err("%s no more kernel memory...", __FUNCTION__);
+ err("%s no more kernel memory...", __func__);
goto exit;
}
}
if (status) {
mos7840_port->busy[i] = 0;
err("%s - usb_submit_urb(write bulk) failed with status = %d",
- __FUNCTION__, status);
+ __func__, status);
bytes_sent = status;
goto exit;
}
struct tty_struct *tty;
int status;
- if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ if (mos7840_port_paranoia_check(port, __func__)) {
dbg("%s", "Invalid port \n");
return;
}
tty = port->tty;
if (!tty) {
- dbg("%s - no tty available", __FUNCTION__);
+ dbg("%s - no tty available", __func__);
return;
}
int status;
struct moschip_port *mos7840_port = mos7840_get_port_private(port);
- if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ if (mos7840_port_paranoia_check(port, __func__)) {
dbg("%s", "Invalid port \n");
return;
}
return;
if (!mos7840_port->open) {
- dbg("%s - port not opened", __FUNCTION__);
+ dbg("%s - port not opened", __func__);
return;
}
tty = port->tty;
if (!tty) {
- dbg("%s - no tty available", __FUNCTION__);
+ dbg("%s - no tty available", __func__);
return;
}
int status = 0;
mos7840_port = mos7840_get_port_private(port);
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (mos7840_port == NULL)
return -ENODEV;
| ((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0)
| ((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0);
- dbg("%s - 0x%04X", __FUNCTION__, result);
+ dbg("%s - 0x%04X", __func__, result);
return result;
}
unsigned int mcr;
unsigned int status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
mos7840_port = mos7840_get_port_private(port);
__u16 * clk_sel_val)
{
- dbg("%s - %d", __FUNCTION__, baudRate);
+ dbg("%s - %d", __func__, baudRate);
if (baudRate <= 115200) {
*divisor = 115200 / baudRate;
return -1;
port = (struct usb_serial_port *)mos7840_port->port;
- if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ if (mos7840_port_paranoia_check(port, __func__)) {
dbg("%s", "Invalid port \n");
return -1;
}
- if (mos7840_serial_paranoia_check(port->serial, __FUNCTION__)) {
+ if (mos7840_serial_paranoia_check(port->serial, __func__)) {
dbg("%s", "Invalid Serial \n");
return -1;
}
number = mos7840_port->port->number - mos7840_port->port->serial->minor;
- dbg("%s - port = %d, baud = %d", __FUNCTION__,
+ dbg("%s - port = %d, baud = %d", __func__,
mos7840_port->port->number, baudRate);
//reset clk_uart_sel in spregOffset
if (baudRate > 115200) {
/* Calculate the Divisor */
if (status) {
- err("%s - bad baud rate", __FUNCTION__);
+ err("%s - bad baud rate", __func__);
dbg("%s\n", "bad baud rate");
return status;
}
port = (struct usb_serial_port *)mos7840_port->port;
- if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ if (mos7840_port_paranoia_check(port, __func__)) {
dbg("%s", "Invalid port \n");
return;
}
- if (mos7840_serial_paranoia_check(port->serial, __FUNCTION__)) {
+ if (mos7840_serial_paranoia_check(port->serial, __func__)) {
dbg("%s", "Invalid Serial \n");
return;
}
serial = port->serial;
- dbg("%s - port %d", __FUNCTION__, mos7840_port->port->number);
+ dbg("%s - port %d", __func__, mos7840_port->port->number);
if (!mos7840_port->open) {
- dbg("%s - port not opened", __FUNCTION__);
+ dbg("%s - port not opened", __func__);
return;
}
if (cflag & PARENB) {
if (cflag & PARODD) {
lParity = LCR_PAR_ODD;
- dbg("%s - parity = odd", __FUNCTION__);
+ dbg("%s - parity = odd", __func__);
} else {
lParity = LCR_PAR_EVEN;
- dbg("%s - parity = even", __FUNCTION__);
+ dbg("%s - parity = even", __func__);
}
} else {
- dbg("%s - parity = none", __FUNCTION__);
+ dbg("%s - parity = none", __func__);
}
if (cflag & CMSPAR) {
/* Change the Stop bit */
if (cflag & CSTOPB) {
lStop = LCR_STOP_2;
- dbg("%s - stop bits = 2", __FUNCTION__);
+ dbg("%s - stop bits = 2", __func__);
} else {
lStop = LCR_STOP_1;
- dbg("%s - stop bits = 1", __FUNCTION__);
+ dbg("%s - stop bits = 1", __func__);
}
/* Update the LCR with the correct value */
baud = 9600;
}
- dbg("%s - baud rate = %d", __FUNCTION__, baud);
+ dbg("%s - baud rate = %d", __func__, baud);
status = mos7840_send_cmd_write_baud_rate(mos7840_port, baud);
/* Enable Interrupts */
struct moschip_port *mos7840_port;
struct tty_struct *tty;
dbg("mos7840_set_termios: START\n");
- if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ if (mos7840_port_paranoia_check(port, __func__)) {
dbg("%s", "Invalid port \n");
return;
}
serial = port->serial;
- if (mos7840_serial_paranoia_check(serial, __FUNCTION__)) {
+ if (mos7840_serial_paranoia_check(serial, __func__)) {
dbg("%s", "Invalid Serial \n");
return;
}
tty = port->tty;
if (!mos7840_port->open) {
- dbg("%s - port not opened", __FUNCTION__);
+ dbg("%s - port not opened", __func__);
return;
}
cflag = tty->termios->c_cflag;
- dbg("%s - clfag %08x iflag %08x", __FUNCTION__,
+ dbg("%s - clfag %08x iflag %08x", __func__,
tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag));
- dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__,
+ dbg("%s - old clfag %08x old iflag %08x", __func__,
old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* change the port settings to the new ones specified */
count = mos7840_chars_in_buffer(mos7840_port->port);
if (count == 0) {
- dbg("%s -- Empty", __FUNCTION__);
+ dbg("%s -- Empty", __func__);
result = TIOCSER_TEMT;
}
return -1;
port = (struct usb_serial_port *)mos7840_port->port;
- if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ if (mos7840_port_paranoia_check(port, __func__)) {
dbg("%s", "Invalid port \n");
return -1;
}
|((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0) /* 0x080 */
|((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0); /* 0x100 */
- dbg("%s -- %x", __FUNCTION__, result);
+ dbg("%s -- %x", __func__, result);
if (copy_to_user(value, &result, sizeof(int)))
return -EFAULT;
struct serial_icounter_struct icount;
int mosret = 0;
- if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
+ if (mos7840_port_paranoia_check(port, __func__)) {
dbg("%s", "Invalid port \n");
return -1;
}
tty = mos7840_port->port->tty;
- dbg("%s - port %d, cmd = 0x%x", __FUNCTION__, port->number, cmd);
+ dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
switch (cmd) {
/* return number of bytes available */
case TIOCSERGETLSR:
- dbg("%s (%d) TIOCSERGETLSR", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
return mos7840_get_lsr_info(mos7840_port, argp);
return 0;
case TIOCMBIS:
case TIOCMBIC:
case TIOCMSET:
- dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __FUNCTION__,
+ dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __func__,
port->number);
mosret =
mos7840_set_modem_info(mos7840_port, cmd, argp);
return mosret;
case TIOCMGET:
- dbg("%s (%d) TIOCMGET", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCMGET", __func__, port->number);
return mos7840_get_modem_info(mos7840_port, argp);
case TIOCGSERIAL:
- dbg("%s (%d) TIOCGSERIAL", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
return mos7840_get_serial_info(mos7840_port, argp);
case TIOCSSERIAL:
- dbg("%s (%d) TIOCSSERIAL", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCSSERIAL", __func__, port->number);
break;
case TIOCMIWAIT:
- dbg("%s (%d) TIOCMIWAIT", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
cprev = mos7840_port->icount;
while (1) {
//interruptible_sleep_on(&mos7840_port->delta_msr_wait);
icount.brk = cnow.brk;
icount.buf_overrun = cnow.buf_overrun;
- dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__,
+ dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
port->number, icount.rx, icount.tx);
if (copy_to_user(argp, &icount, sizeof(icount)))
return -EFAULT;
for (i = 0; i < serial->num_ports; ++i) {
mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
if (mos7840_port == NULL) {
- err("%s - Out of memory", __FUNCTION__);
+ err("%s - Out of memory", __func__);
status = -ENOMEM;
i--; /* don't follow NULL pointer cleaning up */
goto error;
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
default:
dbg("%s - nonzero urb status received: %d",
- __FUNCTION__, status);
+ __func__, status);
goto exit;
}
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
+ usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, data);
tty = port->tty;
if (result)
dev_err(&urb->dev->dev,
"%s - Error %d submitting interrupt urb\n",
- __FUNCTION__, result);
+ __func__, result);
}
static int navman_open(struct usb_serial_port *port, struct file *filp)
{
int result = 0;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (port->interrupt_in_urb) {
- dbg("%s - adding interrupt input for treo", __FUNCTION__);
+ dbg("%s - adding interrupt input for treo", __func__);
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result)
dev_err(&port->dev,
"%s - failed submitting interrupt urb, error %d\n",
- __FUNCTION__, result);
+ __func__, result);
}
return result;
}
static void navman_close(struct usb_serial_port *port, struct file *filp)
{
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
usb_kill_urb(port->interrupt_in_urb);
}
static int navman_write(struct usb_serial_port *port,
const unsigned char *buf, int count)
{
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/*
* This device can't write any data, only read from the device
od = kmalloc( sizeof(struct omninet_data), GFP_KERNEL );
if( !od ) {
- err("%s- kmalloc(%Zd) failed.", __FUNCTION__, sizeof(struct omninet_data));
+ err("%s- kmalloc(%Zd) failed.", __func__, sizeof(struct omninet_data));
return -ENOMEM;
}
usb_set_serial_port_data(port, od);
struct usb_serial_port *wport;
int result = 0;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
wport = serial->port[1];
wport->tty = port->tty;
omninet_read_bulk_callback, port);
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result) {
- err("%s - failed submitting read urb, error %d", __FUNCTION__, result);
+ err("%s - failed submitting read urb, error %d", __func__, result);
}
return result;
static void omninet_close (struct usb_serial_port *port, struct file * filp)
{
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
usb_kill_urb(port->read_urb);
}
int i;
int result;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (status) {
dbg("%s - nonzero read bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
}
omninet_read_bulk_callback, port);
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
- err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
+ err("%s - failed resubmitting read urb, error %d", __func__, result);
return;
}
int result;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (count == 0) {
- dbg("%s - write request of 0 bytes", __FUNCTION__);
+ dbg("%s - write request of 0 bytes", __func__);
return (0);
}
spin_lock_bh(&wport->lock);
if (wport->write_urb_busy) {
spin_unlock_bh(&wport->lock);
- dbg("%s - already writing", __FUNCTION__);
+ dbg("%s - already writing", __func__);
return 0;
}
wport->write_urb_busy = 1;
memcpy (wport->write_urb->transfer_buffer + OMNINET_DATAOFFSET, buf, count);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, wport->write_urb->transfer_buffer);
+ usb_serial_debug_data(debug, &port->dev, __func__, count, wport->write_urb->transfer_buffer);
header->oh_seq = od->od_outseq++;
header->oh_len = count;
result = usb_submit_urb(wport->write_urb, GFP_ATOMIC);
if (result) {
wport->write_urb_busy = 0;
- err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
+ err("%s - failed submitting write urb, error %d", __func__, result);
} else
result = count;
if (wport->write_urb_busy)
room = wport->bulk_out_size - OMNINET_HEADERLEN;
- dbg("%s - returns %d", __FUNCTION__, room);
+ dbg("%s - returns %d", __func__, room);
return (room);
}
struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
int status = urb->status;
- dbg("%s - port %0x\n", __FUNCTION__, port->number);
+ dbg("%s - port %0x\n", __func__, port->number);
port->write_urb_busy = 0;
if (status) {
dbg("%s - nonzero write bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
}
{
struct usb_serial_port *wport = serial->port[1];
struct usb_serial_port *port = serial->port[0];
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
usb_kill_urb(wport->write_urb);
kfree(usb_get_serial_port_data(port));
static void option_rx_throttle(struct usb_serial_port *port)
{
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
}
static void option_rx_unthrottle(struct usb_serial_port *port)
{
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
}
static void option_break_ctl(struct usb_serial_port *port, int break_state)
{
/* Unfortunately, I don't know how to send a break */
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
}
static void option_set_termios(struct usb_serial_port *port,
struct ktermios *old_termios)
{
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/* Doesn't support option setting */
tty_termios_copy_hw(port->tty->termios, old_termios);
option_send_setup(port);
portdata = usb_get_serial_port_data(port);
- dbg("%s: write (%d chars)", __FUNCTION__, count);
+ dbg("%s: write (%d chars)", __func__, count);
i = 0;
left = count;
dbg("usb_write %p failed (err=%d)",
this_urb, this_urb->status);
- dbg("%s: endpoint %d buf %d", __FUNCTION__,
+ dbg("%s: endpoint %d buf %d", __func__,
usb_pipeendpoint(this_urb->pipe), i);
/* send the data */
}
count -= left;
- dbg("%s: wrote (did %d)", __FUNCTION__, count);
+ dbg("%s: wrote (did %d)", __func__, count);
return count;
}
unsigned char *data = urb->transfer_buffer;
int status = urb->status;
- dbg("%s: %p", __FUNCTION__, urb);
+ dbg("%s: %p", __func__, urb);
endpoint = usb_pipeendpoint(urb->pipe);
port = (struct usb_serial_port *) urb->context;
if (status) {
dbg("%s: nonzero status: %d on endpoint %02x.",
- __FUNCTION__, status, endpoint);
+ __func__, status, endpoint);
} else {
tty = port->tty;
if (urb->actual_length) {
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
} else {
- dbg("%s: empty read urb received", __FUNCTION__);
+ dbg("%s: empty read urb received", __func__);
}
/* Resubmit urb so we continue receiving */
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
printk(KERN_ERR "%s: resubmit read urb failed. "
- "(%d)", __FUNCTION__, err);
+ "(%d)", __func__, err);
}
}
return;
struct option_port_private *portdata;
int i;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
port = (struct usb_serial_port *) urb->context;
struct option_port_private *portdata = usb_get_serial_port_data(port);
struct usb_serial *serial = port->serial;
- dbg("%s", __FUNCTION__);
- dbg("%s: urb %p port %p has data %p", __FUNCTION__,urb,port,portdata);
+ dbg("%s", __func__);
+ dbg("%s: urb %p port %p has data %p", __func__,urb,port,portdata);
if (status == 0) {
struct usb_ctrlrequest *req_pkt =
(struct usb_ctrlrequest *)urb->transfer_buffer;
if (!req_pkt) {
- dbg("%s: NULL req_pkt\n", __FUNCTION__);
+ dbg("%s: NULL req_pkt\n", __func__);
return;
}
if ((req_pkt->bRequestType == 0xA1) &&
urb->transfer_buffer +
sizeof(struct usb_ctrlrequest));
- dbg("%s: signal x%x", __FUNCTION__, signals);
+ dbg("%s: signal x%x", __func__, signals);
old_dcd_state = portdata->dcd_state;
portdata->cts_state = 1;
old_dcd_state && !portdata->dcd_state)
tty_hangup(port->tty);
} else {
- dbg("%s: type %x req %x", __FUNCTION__,
+ dbg("%s: type %x req %x", __func__,
req_pkt->bRequestType,req_pkt->bRequest);
}
} else
- dbg("%s: error %d", __FUNCTION__, status);
+ dbg("%s: error %d", __func__, status);
/* Resubmit urb so we continue receiving IRQ data */
if (status != -ESHUTDOWN) {
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
dbg("%s: resubmit intr urb failed. (%d)",
- __FUNCTION__, err);
+ __func__, err);
}
}
data_len += OUT_BUFLEN;
}
- dbg("%s: %d", __FUNCTION__, data_len);
+ dbg("%s: %d", __func__, data_len);
return data_len;
}
if (this_urb && test_bit(i, &portdata->out_busy))
data_len += this_urb->transfer_buffer_length;
}
- dbg("%s: %d", __FUNCTION__, data_len);
+ dbg("%s: %d", __func__, data_len);
return data_len;
}
portdata = usb_get_serial_port_data(port);
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/* Set some sane defaults */
portdata->rts_state = 1;
if (! urb)
continue;
if (urb->dev != serial->dev) {
- dbg("%s: dev %p != %p", __FUNCTION__,
+ dbg("%s: dev %p != %p", __func__,
urb->dev, serial->dev);
continue;
}
err = usb_submit_urb(urb, GFP_KERNEL);
if (err) {
dbg("%s: submit urb %d failed (%d) %d",
- __FUNCTION__, i, err,
+ __func__, i, err,
urb->transfer_buffer_length);
}
}
struct usb_serial *serial = port->serial;
struct option_port_private *portdata;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
portdata = usb_get_serial_port_data(port);
portdata->rts_state = 0;
urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
if (urb == NULL) {
- dbg("%s: alloc for endpoint %d failed.", __FUNCTION__, endpoint);
+ dbg("%s: alloc for endpoint %d failed.", __func__, endpoint);
return NULL;
}
struct usb_serial_port *port;
struct option_port_private *portdata;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
struct usb_serial *serial = port->serial;
struct option_port_private *portdata;
int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
portdata = usb_get_serial_port_data(port);
struct option_port_private *portdata;
u8 *buffer;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/* Now setup per port private data */
for (i = 0; i < serial->num_ports; i++) {
portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
if (!portdata) {
dbg("%s: kmalloc for option_port_private (%d) failed!.",
- __FUNCTION__, i);
+ __func__, i);
return (1);
}
err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (err)
dbg("%s: submit irq_in urb failed %d",
- __FUNCTION__, err);
+ __func__, err);
}
option_setup_urbs(serial);
struct usb_serial_port *port;
struct option_port_private *portdata;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/* Stop reading/writing urbs */
for (i = 0; i < serial->num_ports; ++i) {
unsigned long flags;
int result;
- dbg("%s(port = %d)", __FUNCTION__, port->number);
+ dbg("%s(port = %d)", __func__, port->number);
if ((new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL)) == NULL) {
- dev_err(&port->dev, "%s(): out of memory!\n", __FUNCTION__);
+ dev_err(&port->dev, "%s(): out of memory!\n", __func__);
/* we will try again */
schedule_delayed_work(&priv->delayed_setup_work, msecs_to_jiffies(2));
return;
100);
if (result != OTI6858_CTRL_PKT_SIZE) {
- dev_err(&port->dev, "%s(): error reading status\n", __FUNCTION__);
+ dev_err(&port->dev, "%s(): error reading status\n", __func__);
kfree(new_setup);
/* we will try again */
schedule_delayed_work(&priv->delayed_setup_work, msecs_to_jiffies(2));
priv->setup_done = 1;
spin_unlock_irqrestore(&priv->lock, flags);
- dbg("%s(): submitting interrupt urb", __FUNCTION__);
+ dbg("%s(): submitting interrupt urb", __func__);
port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
- " with error %d\n", __FUNCTION__, result);
+ " with error %d\n", __func__, result);
}
}
unsigned long flags;
unsigned char allow;
- dbg("%s(port = %d)", __FUNCTION__, port->number);
+ dbg("%s(port = %d)", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
if (priv->flags.write_urb_in_use) {
if (count == 0) {
priv->flags.write_urb_in_use = 0;
- dbg("%s(): submitting interrupt urb", __FUNCTION__);
+ dbg("%s(): submitting interrupt urb", __func__);
port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
- " with error %d\n", __FUNCTION__, result);
+ " with error %d\n", __func__, result);
}
return;
}
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
- " with error %d\n", __FUNCTION__, result);
+ " with error %d\n", __func__, result);
priv->flags.write_urb_in_use = 0;
}
struct oti6858_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- dbg("%s(port = %d, count = %d)", __FUNCTION__, port->number, count);
+ dbg("%s(port = %d, count = %d)", __func__, port->number, count);
if (!count)
return count;
int room = 0;
unsigned long flags;
- dbg("%s(port = %d)", __FUNCTION__, port->number);
+ dbg("%s(port = %d)", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
room = oti6858_buf_space_avail(priv->buf);
int chars = 0;
unsigned long flags;
- dbg("%s(port = %d)", __FUNCTION__, port->number);
+ dbg("%s(port = %d)", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
chars = oti6858_buf_data_avail(priv->buf);
u16 divisor;
int br;
- dbg("%s(port = %d)", __FUNCTION__, port->number);
+ dbg("%s(port = %d)", __func__, port->number);
if (!port->tty || !port->tty->termios) {
- dbg("%s(): no tty structures", __FUNCTION__);
+ dbg("%s(): no tty structures", __func__);
return;
}
unsigned long flags;
int result;
- dbg("%s(port = %d)", __FUNCTION__, port->number);
+ dbg("%s(port = %d)", __func__, port->number);
usb_clear_halt(serial->dev, port->write_urb->pipe);
usb_clear_halt(serial->dev, port->read_urb->pipe);
return 0;
if ((buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL)) == NULL) {
- dev_err(&port->dev, "%s(): out of memory!\n", __FUNCTION__);
+ dev_err(&port->dev, "%s(): out of memory!\n", __func__);
return -ENOMEM;
}
spin_unlock_irqrestore(&priv->lock, flags);
kfree(buf);
- dbg("%s(): submitting interrupt urb", __FUNCTION__);
+ dbg("%s(): submitting interrupt urb", __func__);
port->interrupt_in_urb->dev = serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
- " with error %d\n", __FUNCTION__, result);
+ " with error %d\n", __func__, result);
oti6858_close(port, NULL);
return -EPROTO;
}
long timeout;
wait_queue_t wait;
- dbg("%s(port = %d)", __FUNCTION__, port->number);
+ dbg("%s(port = %d)", __func__, port->number);
/* wait for data to drain from the buffer */
spin_lock_irqsave(&priv->lock, flags);
timeout = 30 * HZ; /* PL2303_CLOSING_WAIT */
init_waitqueue_entry(&wait, current);
add_wait_queue(&port->tty->write_wait, &wait);
- dbg("%s(): entering wait loop", __FUNCTION__);
+ dbg("%s(): entering wait loop", __func__);
for (;;) {
set_current_state(TASK_INTERRUPTIBLE);
if (oti6858_buf_data_avail(priv->buf) == 0
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&port->tty->write_wait, &wait);
- dbg("%s(): after wait loop", __FUNCTION__);
+ dbg("%s(): after wait loop", __func__);
/* clear out any remaining data in the buffer */
oti6858_buf_clear(priv->buf);
*/
timeout = 2*HZ;
schedule_timeout_interruptible(timeout);
- dbg("%s(): after schedule_timeout_interruptible()", __FUNCTION__);
+ dbg("%s(): after schedule_timeout_interruptible()", __func__);
/* cancel scheduled setup */
cancel_delayed_work(&priv->delayed_setup_work);
flush_scheduled_work();
/* shutdown our urbs */
- dbg("%s(): shutting down urbs", __FUNCTION__);
+ dbg("%s(): shutting down urbs", __func__);
usb_kill_urb(port->write_urb);
usb_kill_urb(port->read_urb);
usb_kill_urb(port->interrupt_in_urb);
u8 control;
dbg("%s(port = %d, set = 0x%08x, clear = 0x%08x)",
- __FUNCTION__, port->number, set, clear);
+ __func__, port->number, set, clear);
if (!usb_get_intfdata(port->serial->interface))
return -ENODEV;
unsigned pin_state;
unsigned result = 0;
- dbg("%s(port = %d)", __FUNCTION__, port->number);
+ dbg("%s(port = %d)", __func__, port->number);
if (!usb_get_intfdata(port->serial->interface))
return -ENODEV;
if ((pin_state & PIN_DCD) != 0)
result |= TIOCM_CD;
- dbg("%s() = 0x%08x", __FUNCTION__, result);
+ dbg("%s() = 0x%08x", __func__, result);
return result;
}
unsigned int x;
dbg("%s(port = %d, cmd = 0x%04x, arg = 0x%08lx)",
- __FUNCTION__, port->number, cmd, arg);
+ __func__, port->number, cmd, arg);
switch (cmd) {
case TIOCMBIS:
return oti6858_tiocmset(port, NULL, 0, x);
case TIOCMIWAIT:
- dbg("%s(): TIOCMIWAIT", __FUNCTION__);
+ dbg("%s(): TIOCMIWAIT", __func__);
return wait_modem_info(port, arg);
default:
- dbg("%s(): 0x%04x not supported", __FUNCTION__, cmd);
+ dbg("%s(): 0x%04x not supported", __func__, cmd);
break;
}
{
int state;
- dbg("%s(port = %d)", __FUNCTION__, port->number);
+ dbg("%s(port = %d)", __func__, port->number);
state = (break_state == 0) ? 0 : 1;
- dbg("%s(): turning break %s", __FUNCTION__, state ? "on" : "off");
+ dbg("%s(): turning break %s", __func__, state ? "on" : "off");
/* FIXME */
/*
BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
0, NULL, 0, 100);
if (result != 0)
- dbg("%s(): error sending break", __FUNCTION__);
+ dbg("%s(): error sending break", __func__);
*/
}
struct oti6858_private *priv;
int i;
- dbg("%s()", __FUNCTION__);
+ dbg("%s()", __func__);
for (i = 0; i < serial->num_ports; ++i) {
priv = usb_get_serial_port_data(serial->port[i]);
int status = urb->status;
dbg("%s(port = %d, status = %d)",
- __FUNCTION__, port->number, status);
+ __func__, port->number, status);
switch (status) {
case 0:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s(): urb shutting down with status: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
default:
dbg("%s(): nonzero urb status received: %d",
- __FUNCTION__, status);
+ __func__, status);
break;
}
priv->setup_done = 0;
resubmit = 0;
dbg("%s(): scheduling setup_line()",
- __FUNCTION__);
+ __func__);
schedule_delayed_work(&priv->delayed_setup_work, 0);
}
}
priv->setup_done = 0;
resubmit = 0;
dbg("%s(): scheduling setup_line()",
- __FUNCTION__);
+ __func__);
schedule_delayed_work(&priv->delayed_setup_work, 0);
}
}
if (result != 0) {
priv->flags.read_urb_in_use = 0;
dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
- " error %d\n", __FUNCTION__, result);
+ " error %d\n", __func__, result);
} else {
resubmit = 0;
}
if (resubmit) {
int result;
-// dbg("%s(): submitting interrupt urb", __FUNCTION__);
+// dbg("%s(): submitting interrupt urb", __func__);
urb->dev = port->serial->dev;
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result != 0) {
dev_err(&urb->dev->dev,
"%s(): usb_submit_urb() failed with"
- " error %d\n", __FUNCTION__, result);
+ " error %d\n", __func__, result);
}
}
}
int result;
dbg("%s(port = %d, status = %d)",
- __FUNCTION__, port->number, status);
+ __func__, port->number, status);
spin_lock_irqsave(&priv->lock, flags);
priv->flags.read_urb_in_use = 0;
if (status != 0) {
if (!port->open_count) {
- dbg("%s(): port is closed, exiting", __FUNCTION__);
+ dbg("%s(): port is closed, exiting", __func__);
return;
}
/*
if (status == -EPROTO) {
// PL2303 mysteriously fails with -EPROTO reschedule the read
- dbg("%s - caught -EPROTO, resubmitting the urb", __FUNCTION__);
+ dbg("%s - caught -EPROTO, resubmitting the urb", __func__);
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
- dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+ dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
return;
}
*/
- dbg("%s(): unable to handle the error, exiting", __FUNCTION__);
+ dbg("%s(): unable to handle the error, exiting", __func__);
return;
}
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
- " error %d\n", __FUNCTION__, result);
+ " error %d\n", __func__, result);
}
}
}
int result;
dbg("%s(port = %d, status = %d)",
- __FUNCTION__, port->number, status);
+ __func__, port->number, status);
switch (status) {
case 0:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s(): urb shutting down with status: %d",
- __FUNCTION__, status);
+ __func__, status);
priv->flags.write_urb_in_use = 0;
return;
default:
/* error in the urb, so we have to resubmit it */
dbg("%s(): nonzero write bulk status received: %d",
- __FUNCTION__, status);
- dbg("%s(): overflow in write", __FUNCTION__);
+ __func__, status);
+ dbg("%s(): overflow in write", __func__);
port->write_urb->transfer_buffer_length = 1;
port->write_urb->dev = port->serial->dev;
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
- " error %d\n", __FUNCTION__, result);
+ " error %d\n", __func__, result);
} else {
return;
}
// schedule the interrupt urb if we are still open */
port->interrupt_in_urb->dev = port->serial->dev;
- dbg("%s(): submitting interrupt urb", __FUNCTION__);
+ dbg("%s(): submitting interrupt urb", __func__);
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result != 0) {
dev_err(&port->dev, "%s(): failed submitting int urb,"
- " error %d\n", __FUNCTION__, result);
+ " error %d\n", __func__, result);
}
}
retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE,
value, 0, NULL, 0, 100);
- dbg("%s - value = %d, retval = %d", __FUNCTION__, value, retval);
+ dbg("%s - value = %d, retval = %d", __func__, value, retval);
return retval;
}
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
spin_unlock_irqrestore(&priv->lock, flags);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count,
+ usb_serial_debug_data(debug, &port->dev, __func__, count,
port->write_urb->transfer_buffer);
port->write_urb->transfer_buffer_length = count;
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
dev_err(&port->dev, "%s - failed submitting write urb,"
- " error %d\n", __FUNCTION__, result);
+ " error %d\n", __func__, result);
priv->write_urb_in_use = 0;
// TODO: reschedule pl2303_send
}
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count);
+ dbg("%s - port %d, %d bytes", __func__, port->number, count);
if (!count)
return count;
int room = 0;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
room = pl2303_buf_space_avail(priv->buf);
spin_unlock_irqrestore(&priv->lock, flags);
- dbg("%s - returns %d", __FUNCTION__, room);
+ dbg("%s - returns %d", __func__, room);
return room;
}
int chars = 0;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
chars = pl2303_buf_data_avail(priv->buf);
spin_unlock_irqrestore(&priv->lock, flags);
- dbg("%s - returns %d", __FUNCTION__, chars);
+ dbg("%s - returns %d", __func__, chars);
return chars;
}
int i;
u8 control;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
if (!priv->termios_initialized) {
buf = kzalloc(7, GFP_KERNEL);
if (!buf) {
- dev_err(&port->dev, "%s - out of memory.\n", __FUNCTION__);
+ dev_err(&port->dev, "%s - out of memory.\n", __func__);
return;
}
default:
case CS8: buf[6] = 8; break;
}
- dbg("%s - data bits = %d", __FUNCTION__, buf[6]);
+ dbg("%s - data bits = %d", __func__, buf[6]);
}
baud = tty_get_baud_rate(port->tty);;
- dbg("%s - baud = %d", __FUNCTION__, baud);
+ dbg("%s - baud = %d", __func__, baud);
if (baud) {
buf[0] = baud & 0xff;
buf[1] = (baud >> 8) & 0xff;
/* For reference buf[4]=2 is 2 stop bits */
if (cflag & CSTOPB) {
buf[4] = 2;
- dbg("%s - stop bits = 2", __FUNCTION__);
+ dbg("%s - stop bits = 2", __func__);
} else {
buf[4] = 0;
- dbg("%s - stop bits = 1", __FUNCTION__);
+ dbg("%s - stop bits = 1", __func__);
}
if (cflag & PARENB) {
/* For reference buf[5]=4 is space parity */
if (cflag & PARODD) {
buf[5] = 1;
- dbg("%s - parity = odd", __FUNCTION__);
+ dbg("%s - parity = odd", __func__);
} else {
buf[5] = 2;
- dbg("%s - parity = even", __FUNCTION__);
+ dbg("%s - parity = even", __func__);
}
} else {
buf[5] = 0;
- dbg("%s - parity = none", __FUNCTION__);
+ dbg("%s - parity = none", __func__);
}
i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
long timeout;
wait_queue_t wait;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* wait for data to drain from the buffer */
spin_lock_irqsave(&priv->lock, flags);
schedule_timeout_interruptible(timeout);
/* shutdown our urbs */
- dbg("%s - shutting down urbs", __FUNCTION__);
+ dbg("%s - shutting down urbs", __func__);
usb_kill_urb(port->write_urb);
usb_kill_urb(port->read_urb);
usb_kill_urb(port->interrupt_in_urb);
struct pl2303_private *priv = usb_get_serial_port_data(port);
int result;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (priv->type != HX) {
usb_clear_halt(serial->dev, port->write_urb->pipe);
//FIXME: need to assert RTS and DTR if CRTSCTS off
- dbg("%s - submitting read urb", __FUNCTION__);
+ dbg("%s - submitting read urb", __func__);
port->read_urb->dev = serial->dev;
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result) {
dev_err(&port->dev, "%s - failed submitting read urb,"
- " error %d\n", __FUNCTION__, result);
+ " error %d\n", __func__, result);
pl2303_close(port, NULL);
return -EPROTO;
}
- dbg("%s - submitting interrupt urb", __FUNCTION__);
+ dbg("%s - submitting interrupt urb", __func__);
port->interrupt_in_urb->dev = serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result) {
dev_err(&port->dev, "%s - failed submitting interrupt urb,"
- " error %d\n", __FUNCTION__, result);
+ " error %d\n", __func__, result);
pl2303_close(port, NULL);
return -EPROTO;
}
unsigned int status;
unsigned int result;
- dbg("%s (%d)", __FUNCTION__, port->number);
+ dbg("%s (%d)", __func__, port->number);
if (!usb_get_intfdata(port->serial->interface))
return -ENODEV;
| ((status & UART_RING) ? TIOCM_RI : 0)
| ((status & UART_DCD) ? TIOCM_CD : 0);
- dbg("%s - result = %x", __FUNCTION__, result);
+ dbg("%s - result = %x", __func__, result);
return result;
}
static int pl2303_ioctl(struct usb_serial_port *port, struct file *file,
unsigned int cmd, unsigned long arg)
{
- dbg("%s (%d) cmd = 0x%04x", __FUNCTION__, port->number, cmd);
+ dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
switch (cmd) {
case TIOCMIWAIT:
- dbg("%s (%d) TIOCMIWAIT", __FUNCTION__, port->number);
+ dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
return wait_modem_info(port, arg);
default:
- dbg("%s not supported = 0x%04x", __FUNCTION__, cmd);
+ dbg("%s not supported = 0x%04x", __func__, cmd);
break;
}
u16 state;
int result;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (break_state == 0)
state = BREAK_OFF;
else
state = BREAK_ON;
- dbg("%s - turning break %s", __FUNCTION__, state==BREAK_OFF ? "off" : "on");
+ dbg("%s - turning break %s", __func__, state==BREAK_OFF ? "off" : "on");
result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
0, NULL, 0, 100);
if (result)
- dbg("%s - error sending break = %d", __FUNCTION__, result);
+ dbg("%s - error sending break = %d", __func__, result);
}
static void pl2303_shutdown(struct usb_serial *serial)
int i;
struct pl2303_private *priv;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
for (i = 0; i < serial->num_ports; ++i) {
priv = usb_get_serial_port_data(serial->port[i]);
int status = urb->status;
int retval;
- dbg("%s (%d)", __FUNCTION__, port->number);
+ dbg("%s (%d)", __func__, port->number);
switch (status) {
case 0:
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __FUNCTION__,
+ dbg("%s - urb shutting down with status: %d", __func__,
status);
return;
default:
- dbg("%s - nonzero urb status received: %d", __FUNCTION__,
+ dbg("%s - nonzero urb status received: %d", __func__,
status);
goto exit;
}
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
+ usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, urb->transfer_buffer);
pl2303_update_line_status(port, data, actual_length);
if (retval)
dev_err(&urb->dev->dev,
"%s - usb_submit_urb failed with result %d\n",
- __FUNCTION__, retval);
+ __func__, retval);
}
static void pl2303_read_bulk_callback(struct urb *urb)
u8 line_status;
char tty_flag;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (status) {
- dbg("%s - urb status = %d", __FUNCTION__, status);
+ dbg("%s - urb status = %d", __func__, status);
if (!port->open_count) {
- dbg("%s - port is closed, exiting.", __FUNCTION__);
+ dbg("%s - port is closed, exiting.", __func__);
return;
}
if (status == -EPROTO) {
/* PL2303 mysteriously fails with -EPROTO reschedule
* the read */
dbg("%s - caught -EPROTO, resubmitting the urb",
- __FUNCTION__);
+ __func__);
urb->dev = port->serial->dev;
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
dev_err(&urb->dev->dev, "%s - failed"
" resubmitting read urb, error %d\n",
- __FUNCTION__, result);
+ __func__, result);
return;
}
- dbg("%s - unable to handle the error, exiting.", __FUNCTION__);
+ dbg("%s - unable to handle the error, exiting.", __func__);
return;
}
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
+ usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, data);
/* get tty_flag from status */
tty_flag = TTY_PARITY;
else if (line_status & UART_FRAME_ERROR)
tty_flag = TTY_FRAME;
- dbg("%s - tty_flag = %d", __FUNCTION__, tty_flag);
+ dbg("%s - tty_flag = %d", __func__, tty_flag);
tty = port->tty;
if (tty && urb->actual_length) {
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
dev_err(&urb->dev->dev, "%s - failed resubmitting"
- " read urb, error %d\n", __FUNCTION__, result);
+ " read urb, error %d\n", __func__, result);
}
return;
int result;
int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
switch (status) {
case 0:
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __FUNCTION__,
+ dbg("%s - urb shutting down with status: %d", __func__,
status);
priv->write_urb_in_use = 0;
return;
default:
/* error in the urb, so we have to resubmit it */
- dbg("%s - Overflow in write", __FUNCTION__);
- dbg("%s - nonzero write bulk status received: %d", __FUNCTION__,
+ dbg("%s - Overflow in write", __func__);
+ dbg("%s - nonzero write bulk status received: %d", __func__,
status);
port->write_urb->transfer_buffer_length = 1;
port->write_urb->dev = port->serial->dev;
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result)
dev_err(&urb->dev->dev, "%s - failed resubmitting write"
- " urb, error %d\n", __FUNCTION__, result);
+ " urb, error %d\n", __func__, result);
else
return;
}
int result;
int status = urb->status;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
if (status) {
dbg("%s - nonzero read bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
}
if (actual_length <= (length - 2)) {
- info ("%s - actual: %d", __FUNCTION__, actual_length);
+ info ("%s - actual: %d", __func__, actual_length);
for (i = 0; i < actual_length; i++) {
tty_insert_flip_char (port->tty, data[i], 0);
}
tty_flip_buffer_push (port->tty);
} else {
- err ("%s - inconsistent lengths %d:%d", __FUNCTION__,
+ err ("%s - inconsistent lengths %d:%d", __func__,
actual_length, length);
}
} else {
- err ("%s - bad CRC %x", __FUNCTION__, fcs);
+ err ("%s - bad CRC %x", __func__, fcs);
}
} else {
for (i = 0; i < length; i++) {
safe_read_bulk_callback, port);
if ((result = usb_submit_urb (urb, GFP_ATOMIC))) {
- err ("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
+ err ("%s - failed resubmitting read urb, error %d", __func__, result);
}
}
count);
if (!port->write_urb) {
- dbg ("%s - write urb NULL", __FUNCTION__);
+ dbg ("%s - write urb NULL", __func__);
return (0);
}
port->write_urb->transfer_buffer_length);
if (!port->write_urb->transfer_buffer_length) {
- dbg ("%s - write urb transfer_buffer_length zero", __FUNCTION__);
+ dbg ("%s - write urb transfer_buffer_length zero", __func__);
return (0);
}
if (count == 0) {
- dbg ("%s - write request of 0 bytes", __FUNCTION__);
+ dbg ("%s - write request of 0 bytes", __func__);
return (0);
}
spin_lock_bh(&port->lock);
if (port->write_urb_busy) {
spin_unlock_bh(&port->lock);
- dbg("%s - already writing", __FUNCTION__);
+ dbg("%s - already writing", __func__);
return 0;
}
port->write_urb_busy = 1;
port->write_urb->transfer_buffer_length = count;
}
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, port->write_urb->transfer_buffer);
+ usb_serial_debug_data(debug, &port->dev, __func__, count, port->write_urb->transfer_buffer);
#ifdef ECHO_TX
{
int i;
port->write_urb->dev = port->serial->dev;
if ((result = usb_submit_urb (port->write_urb, GFP_KERNEL))) {
port->write_urb_busy = 0;
- err ("%s - failed submitting write urb, error %d", __FUNCTION__, result);
+ err ("%s - failed submitting write urb, error %d", __func__, result);
return 0;
}
- dbg ("%s urb: %p submitted", __FUNCTION__, port->write_urb);
+ dbg ("%s urb: %p submitted", __func__, port->write_urb);
return (count);
}
{
int room = 0; // Default: no room
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
if (port->write_urb_busy)
room = port->bulk_out_size - (safe ? 2 : 0);
struct sierra_port_private *portdata;
__u16 interface = 0;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
portdata = usb_get_serial_port_data(port);
static void sierra_rx_throttle(struct usb_serial_port *port)
{
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
}
static void sierra_rx_unthrottle(struct usb_serial_port *port)
{
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
}
static void sierra_break_ctl(struct usb_serial_port *port, int break_state)
{
/* Unfortunately, I don't know how to send a break */
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
}
static void sierra_set_termios(struct usb_serial_port *port,
struct ktermios *old_termios)
{
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
tty_termios_copy_hw(port->tty->termios, old_termios);
sierra_send_setup(port);
}
int status = urb->status;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* free up the transfer buffer, as usb_free_urb() does not do this */
kfree(urb->transfer_buffer);
if (status)
dbg("%s - nonzero write bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
spin_lock_irqsave(&portdata->lock, flags);
--portdata->outstanding_urbs;
portdata = usb_get_serial_port_data(port);
- dbg("%s: write (%d chars)", __FUNCTION__, count);
+ dbg("%s: write (%d chars)", __func__, count);
spin_lock_irqsave(&portdata->lock, flags);
if (portdata->outstanding_urbs > N_OUT_URB) {
spin_unlock_irqrestore(&portdata->lock, flags);
- dbg("%s - write limit hit\n", __FUNCTION__);
+ dbg("%s - write limit hit\n", __func__);
return 0;
}
portdata->outstanding_urbs++;
memcpy(buffer, buf, count);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, buffer);
+ usb_serial_debug_data(debug, &port->dev, __func__, count, buffer);
usb_fill_bulk_urb(urb, serial->dev,
usb_sndbulkpipe(serial->dev,
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed "
- "with status = %d\n", __FUNCTION__, status);
+ "with status = %d\n", __func__, status);
count = status;
goto error;
}
unsigned char *data = urb->transfer_buffer;
int status = urb->status;
- dbg("%s: %p", __FUNCTION__, urb);
+ dbg("%s: %p", __func__, urb);
endpoint = usb_pipeendpoint(urb->pipe);
port = (struct usb_serial_port *) urb->context;
if (status) {
dbg("%s: nonzero status: %d on endpoint %02x.",
- __FUNCTION__, status, endpoint);
+ __func__, status, endpoint);
} else {
tty = port->tty;
if (urb->actual_length) {
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
} else {
- dbg("%s: empty read urb received", __FUNCTION__);
+ dbg("%s: empty read urb received", __func__);
}
/* Resubmit urb so we continue receiving */
struct sierra_port_private *portdata = usb_get_serial_port_data(port);
struct usb_serial *serial = port->serial;
- dbg("%s", __FUNCTION__);
- dbg("%s: urb %p port %p has data %p", __FUNCTION__, urb, port, portdata);
+ dbg("%s", __func__);
+ dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata);
if (status == 0) {
struct usb_ctrlrequest *req_pkt =
(struct usb_ctrlrequest *)urb->transfer_buffer;
if (!req_pkt) {
- dbg("%s: NULL req_pkt\n", __FUNCTION__);
+ dbg("%s: NULL req_pkt\n", __func__);
return;
}
if ((req_pkt->bRequestType == 0xA1) &&
urb->transfer_buffer +
sizeof(struct usb_ctrlrequest));
- dbg("%s: signal x%x", __FUNCTION__, signals);
+ dbg("%s: signal x%x", __func__, signals);
old_dcd_state = portdata->dcd_state;
portdata->cts_state = 1;
old_dcd_state && !portdata->dcd_state)
tty_hangup(port->tty);
} else {
- dbg("%s: type %x req %x", __FUNCTION__,
+ dbg("%s: type %x req %x", __func__,
req_pkt->bRequestType, req_pkt->bRequest);
}
} else
- dbg("%s: error %d", __FUNCTION__, status);
+ dbg("%s: error %d", __func__, status);
/* Resubmit urb so we continue receiving IRQ data */
if (status != -ESHUTDOWN) {
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
dbg("%s: resubmit intr urb failed. (%d)",
- __FUNCTION__, err);
+ __func__, err);
}
}
struct sierra_port_private *portdata = usb_get_serial_port_data(port);
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* try to give a good number back based on if we have any free urbs at
* this point in time */
spin_lock_irqsave(&portdata->lock, flags);
if (portdata->outstanding_urbs > N_OUT_URB * 2 / 3) {
spin_unlock_irqrestore(&portdata->lock, flags);
- dbg("%s - write limit hit\n", __FUNCTION__);
+ dbg("%s - write limit hit\n", __func__);
return 0;
}
spin_unlock_irqrestore(&portdata->lock, flags);
static int sierra_chars_in_buffer(struct usb_serial_port *port)
{
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/*
* We can't really account for how much data we
portdata = usb_get_serial_port_data(port);
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/* Set some sane defaults */
portdata->rts_state = 1;
if (!urb)
continue;
if (urb->dev != serial->dev) {
- dbg("%s: dev %p != %p", __FUNCTION__,
+ dbg("%s: dev %p != %p", __func__,
urb->dev, serial->dev);
continue;
}
struct usb_serial *serial = port->serial;
struct sierra_port_private *portdata;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
portdata = usb_get_serial_port_data(port);
portdata->rts_state = 0;
int i;
int j;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/* Set Device mode to D0 */
sierra_set_power_state(serial->dev, 0x0000);
portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
if (!portdata) {
dbg("%s: kmalloc for sierra_port_private (%d) failed!.",
- __FUNCTION__, i);
+ __func__, i);
return -ENOMEM;
}
spin_lock_init(&portdata->lock);
urb = usb_alloc_urb(0, GFP_KERNEL);
if (urb == NULL) {
dbg("%s: alloc for in port failed.",
- __FUNCTION__);
+ __func__);
continue;
}
/* Fill URB using supplied data. */
struct usb_serial_port *port;
struct sierra_port_private *portdata;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
dbg("%s - product 0x%4X, num configurations %d, configuration value %d",
- __FUNCTION__, le16_to_cpu(dev->descriptor.idProduct),
+ __func__, le16_to_cpu(dev->descriptor.idProduct),
dev->descriptor.bNumConfigurations,
dev->actconfig->desc.bConfigurationValue);
/* create device structure */
tdev = kzalloc(sizeof(struct ti_device), GFP_KERNEL);
if (tdev == NULL) {
- dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err(&dev->dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
mutex_init(&tdev->td_open_close_lock);
/* determine device type */
if (usb_match_id(serial->interface, ti_id_table_3410))
tdev->td_is_3410 = 1;
- dbg("%s - device type is %s", __FUNCTION__, tdev->td_is_3410 ? "3410" : "5052");
+ dbg("%s - device type is %s", __func__, tdev->td_is_3410 ? "3410" : "5052");
/* if we have only 1 configuration, download firmware */
if (dev->descriptor.bNumConfigurations == 1) {
for (i = 0; i < serial->num_ports; ++i) {
tport = kzalloc(sizeof(struct ti_port), GFP_KERNEL);
if (tport == NULL) {
- dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err(&dev->dev, "%s - out of memory\n", __func__);
status = -ENOMEM;
goto free_tports;
}
init_waitqueue_head(&tport->tp_write_wait);
tport->tp_write_buf = ti_buf_alloc();
if (tport->tp_write_buf == NULL) {
- dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err(&dev->dev, "%s - out of memory\n", __func__);
kfree(tport);
status = -ENOMEM;
goto free_tports;
struct ti_device *tdev = usb_get_serial_data(serial);
struct ti_port *tport;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
for (i=0; i < serial->num_ports; ++i) {
tport = usb_get_serial_port_data(serial->port[i]);
TI_PIPE_TIMEOUT_ENABLE |
(TI_TRANSFER_TIMEOUT << 2));
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (tport == NULL)
return -ENODEV;
/* start interrupt urb the first time a port is opened on this device */
if (tdev->td_open_port_count == 0) {
- dbg("%s - start interrupt in urb", __FUNCTION__);
+ dbg("%s - start interrupt in urb", __func__);
urb = tdev->td_serial->port[0]->interrupt_in_urb;
if (!urb) {
- dev_err(&port->dev, "%s - no interrupt urb\n", __FUNCTION__);
+ dev_err(&port->dev, "%s - no interrupt urb\n", __func__);
status = -EINVAL;
goto release_lock;
}
urb->dev = dev;
status = usb_submit_urb(urb, GFP_KERNEL);
if (status) {
- dev_err(&port->dev, "%s - submit interrupt urb failed, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - submit interrupt urb failed, %d\n", __func__, status);
goto release_lock;
}
}
ti_set_termios(port, port->tty->termios);
- dbg("%s - sending TI_OPEN_PORT", __FUNCTION__);
+ dbg("%s - sending TI_OPEN_PORT", __func__);
status = ti_command_out_sync(tdev, TI_OPEN_PORT,
(__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
if (status) {
- dev_err(&port->dev, "%s - cannot send open command, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - cannot send open command, %d\n", __func__, status);
goto unlink_int_urb;
}
- dbg("%s - sending TI_START_PORT", __FUNCTION__);
+ dbg("%s - sending TI_START_PORT", __func__);
status = ti_command_out_sync(tdev, TI_START_PORT,
(__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
if (status) {
- dev_err(&port->dev, "%s - cannot send start command, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - cannot send start command, %d\n", __func__, status);
goto unlink_int_urb;
}
- dbg("%s - sending TI_PURGE_PORT", __FUNCTION__);
+ dbg("%s - sending TI_PURGE_PORT", __func__);
status = ti_command_out_sync(tdev, TI_PURGE_PORT,
(__u8)(TI_UART1_PORT + port_number), TI_PURGE_INPUT, NULL, 0);
if (status) {
- dev_err(&port->dev, "%s - cannot clear input buffers, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - cannot clear input buffers, %d\n", __func__, status);
goto unlink_int_urb;
}
status = ti_command_out_sync(tdev, TI_PURGE_PORT,
(__u8)(TI_UART1_PORT + port_number), TI_PURGE_OUTPUT, NULL, 0);
if (status) {
- dev_err(&port->dev, "%s - cannot clear output buffers, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - cannot clear output buffers, %d\n", __func__, status);
goto unlink_int_urb;
}
ti_set_termios(port, port->tty->termios);
- dbg("%s - sending TI_OPEN_PORT (2)", __FUNCTION__);
+ dbg("%s - sending TI_OPEN_PORT (2)", __func__);
status = ti_command_out_sync(tdev, TI_OPEN_PORT,
(__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
if (status) {
- dev_err(&port->dev, "%s - cannot send open command (2), %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - cannot send open command (2), %d\n", __func__, status);
goto unlink_int_urb;
}
- dbg("%s - sending TI_START_PORT (2)", __FUNCTION__);
+ dbg("%s - sending TI_START_PORT (2)", __func__);
status = ti_command_out_sync(tdev, TI_START_PORT,
(__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
if (status) {
- dev_err(&port->dev, "%s - cannot send start command (2), %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - cannot send start command (2), %d\n", __func__, status);
goto unlink_int_urb;
}
/* start read urb */
- dbg("%s - start read urb", __FUNCTION__);
+ dbg("%s - start read urb", __func__);
urb = port->read_urb;
if (!urb) {
- dev_err(&port->dev, "%s - no read urb\n", __FUNCTION__);
+ dev_err(&port->dev, "%s - no read urb\n", __func__);
status = -EINVAL;
goto unlink_int_urb;
}
urb->dev = dev;
status = usb_submit_urb(urb, GFP_KERNEL);
if (status) {
- dev_err(&port->dev, "%s - submit read urb failed, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - submit read urb failed, %d\n", __func__, status);
goto unlink_int_urb;
}
usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
release_lock:
mutex_unlock(&tdev->td_open_close_lock);
- dbg("%s - exit %d", __FUNCTION__, status);
+ dbg("%s - exit %d", __func__, status);
return status;
}
int status;
int do_unlock;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
tdev = usb_get_serial_data(port->serial);
tport = usb_get_serial_port_data(port);
port_number = port->number - port->serial->minor;
- dbg("%s - sending TI_CLOSE_PORT", __FUNCTION__);
+ dbg("%s - sending TI_CLOSE_PORT", __func__);
status = ti_command_out_sync(tdev, TI_CLOSE_PORT,
(__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
if (status)
- dev_err(&port->dev, "%s - cannot send close port command, %d\n" , __FUNCTION__, status);
+ dev_err(&port->dev, "%s - cannot send close port command, %d\n" , __func__, status);
/* if mutex_lock is interrupted, continue anyway */
do_unlock = !mutex_lock_interruptible(&tdev->td_open_close_lock);
if (do_unlock)
mutex_unlock(&tdev->td_open_close_lock);
- dbg("%s - exit", __FUNCTION__);
+ dbg("%s - exit", __func__);
}
struct ti_port *tport = usb_get_serial_port_data(port);
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (count == 0) {
- dbg("%s - write request of 0 bytes", __FUNCTION__);
+ dbg("%s - write request of 0 bytes", __func__);
return 0;
}
int room = 0;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (tport == NULL)
return -ENODEV;
room = ti_buf_space_avail(tport->tp_write_buf);
spin_unlock_irqrestore(&tport->tp_lock, flags);
- dbg("%s - returns %d", __FUNCTION__, room);
+ dbg("%s - returns %d", __func__, room);
return room;
}
int chars = 0;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (tport == NULL)
return -ENODEV;
chars = ti_buf_data_avail(tport->tp_write_buf);
spin_unlock_irqrestore(&tport->tp_lock, flags);
- dbg("%s - returns %d", __FUNCTION__, chars);
+ dbg("%s - returns %d", __func__, chars);
return chars;
}
struct ti_port *tport = usb_get_serial_port_data(port);
struct tty_struct *tty;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (tport == NULL)
return;
tty = port->tty;
if (!tty) {
- dbg("%s - no tty", __FUNCTION__);
+ dbg("%s - no tty", __func__);
return;
}
struct tty_struct *tty;
int status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (tport == NULL)
return;
tty = port->tty;
if (!tty) {
- dbg("%s - no tty", __FUNCTION__);
+ dbg("%s - no tty", __func__);
return;
}
if (I_IXOFF(tty) || C_CRTSCTS(tty)) {
status = ti_restart_read(tport, tty);
if (status)
- dev_err(&port->dev, "%s - cannot restart read, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - cannot restart read, %d\n", __func__, status);
}
}
struct async_icount cnow;
struct async_icount cprev;
- dbg("%s - port %d, cmd = 0x%04X", __FUNCTION__, port->number, cmd);
+ dbg("%s - port %d, cmd = 0x%04X", __func__, port->number, cmd);
if (tport == NULL)
return -ENODEV;
switch (cmd) {
case TIOCGSERIAL:
- dbg("%s - (%d) TIOCGSERIAL", __FUNCTION__, port->number);
+ dbg("%s - (%d) TIOCGSERIAL", __func__, port->number);
return ti_get_serial_info(tport, (struct serial_struct __user *)arg);
break;
case TIOCSSERIAL:
- dbg("%s - (%d) TIOCSSERIAL", __FUNCTION__, port->number);
+ dbg("%s - (%d) TIOCSSERIAL", __func__, port->number);
return ti_set_serial_info(tport, (struct serial_struct __user *)arg);
break;
case TIOCMIWAIT:
- dbg("%s - (%d) TIOCMIWAIT", __FUNCTION__, port->number);
+ dbg("%s - (%d) TIOCMIWAIT", __func__, port->number);
cprev = tport->tp_icount;
while (1) {
interruptible_sleep_on(&tport->tp_msr_wait);
break;
case TIOCGICOUNT:
- dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__, port->number, tport->tp_icount.rx, tport->tp_icount.tx);
+ dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __func__, port->number, tport->tp_icount.rx, tport->tp_icount.tx);
if (copy_to_user((void __user *)arg, &tport->tp_icount, sizeof(tport->tp_icount)))
return -EFAULT;
return 0;
int port_number = port->number - port->serial->minor;
unsigned int mcr;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
cflag = tty->termios->c_cflag;
iflag = tty->termios->c_iflag;
- dbg("%s - cflag %08x, iflag %08x", __FUNCTION__, cflag, iflag);
- dbg("%s - old clfag %08x, old iflag %08x", __FUNCTION__, old_termios->c_cflag, old_termios->c_iflag);
+ dbg("%s - cflag %08x, iflag %08x", __func__, cflag, iflag);
+ dbg("%s - old clfag %08x, old iflag %08x", __func__, old_termios->c_cflag, old_termios->c_iflag);
if (tport == NULL)
return;
config = kmalloc(sizeof(*config), GFP_KERNEL);
if (!config) {
- dev_err(&port->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err(&port->dev, "%s - out of memory\n", __func__);
return;
}
tty_encode_baud_rate(tty, baud, baud);
dbg("%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d",
- __FUNCTION__, baud, config->wBaudRate, config->wFlags, config->bDataBits, config->bParity, config->bStopBits, config->cXon, config->cXoff, config->bUartMode);
+ __func__, baud, config->wBaudRate, config->wFlags, config->bDataBits, config->bParity, config->bStopBits, config->cXon, config->cXoff, config->bUartMode);
cpu_to_be16s(&config->wBaudRate);
cpu_to_be16s(&config->wFlags);
(__u8)(TI_UART1_PORT + port_number), 0, (__u8 *)config,
sizeof(*config));
if (status)
- dev_err(&port->dev, "%s - cannot set config on port %d, %d\n", __FUNCTION__, port_number, status);
+ dev_err(&port->dev, "%s - cannot set config on port %d, %d\n", __func__, port_number, status);
/* SET_CONFIG asserts RTS and DTR, reset them correctly */
mcr = tport->tp_shadow_mcr;
mcr &= ~(TI_MCR_DTR | TI_MCR_RTS);
status = ti_set_mcr(tport, mcr);
if (status)
- dev_err(&port->dev, "%s - cannot set modem control on port %d, %d\n", __FUNCTION__, port_number, status);
+ dev_err(&port->dev, "%s - cannot set modem control on port %d, %d\n", __func__, port_number, status);
kfree(config);
}
unsigned int mcr;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (tport == NULL)
return -ENODEV;
| ((msr & TI_MSR_RI) ? TIOCM_RI : 0)
| ((msr & TI_MSR_DSR) ? TIOCM_DSR : 0);
- dbg("%s - 0x%04X", __FUNCTION__, result);
+ dbg("%s - 0x%04X", __func__, result);
return result;
}
unsigned int mcr;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (tport == NULL)
return -ENODEV;
struct ti_port *tport = usb_get_serial_port_data(port);
int status;
- dbg("%s - state = %d", __FUNCTION__, break_state);
+ dbg("%s - state = %d", __func__, break_state);
if (tport == NULL)
return;
TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0);
if (status)
- dbg("%s - error setting break, %d", __FUNCTION__, status);
+ dbg("%s - error setting break, %d", __func__, status);
}
int retval;
__u8 msr;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
switch (status) {
case 0:
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
- dbg("%s - urb shutting down, %d", __FUNCTION__, status);
+ dbg("%s - urb shutting down, %d", __func__, status);
tdev->td_urb_error = 1;
return;
default:
dev_err(dev, "%s - nonzero urb status, %d\n",
- __FUNCTION__, status);
+ __func__, status);
tdev->td_urb_error = 1;
goto exit;
}
if (length != 2) {
- dbg("%s - bad packet size, %d", __FUNCTION__, length);
+ dbg("%s - bad packet size, %d", __func__, length);
goto exit;
}
if (data[0] == TI_CODE_HARDWARE_ERROR) {
- dev_err(dev, "%s - hardware error, %d\n", __FUNCTION__, data[1]);
+ dev_err(dev, "%s - hardware error, %d\n", __func__, data[1]);
goto exit;
}
port_number = TI_GET_PORT_FROM_CODE(data[0]);
function = TI_GET_FUNC_FROM_CODE(data[0]);
- dbg("%s - port_number %d, function %d, data 0x%02X", __FUNCTION__, port_number, function, data[1]);
+ dbg("%s - port_number %d, function %d, data 0x%02X", __func__, port_number, function, data[1]);
if (port_number >= serial->num_ports) {
- dev_err(dev, "%s - bad port number, %d\n", __FUNCTION__, port_number);
+ dev_err(dev, "%s - bad port number, %d\n", __func__, port_number);
goto exit;
}
switch (function) {
case TI_CODE_DATA_ERROR:
- dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n", __FUNCTION__, port_number, data[1]);
+ dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n", __func__, port_number, data[1]);
break;
case TI_CODE_MODEM_STATUS:
msr = data[1];
- dbg("%s - port %d, msr 0x%02X", __FUNCTION__, port_number, msr);
+ dbg("%s - port %d, msr 0x%02X", __func__, port_number, msr);
ti_handle_new_msr(tport, msr);
break;
default:
- dev_err(dev, "%s - unknown interrupt code, 0x%02X\n", __FUNCTION__, data[1]);
+ dev_err(dev, "%s - unknown interrupt code, 0x%02X\n", __func__, data[1]);
break;
}
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
dev_err(dev, "%s - resubmit interrupt urb failed, %d\n",
- __FUNCTION__, retval);
+ __func__, retval);
}
int status = urb->status;
int retval = 0;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
switch (status) {
case 0:
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
- dbg("%s - urb shutting down, %d", __FUNCTION__, status);
+ dbg("%s - urb shutting down, %d", __func__, status);
tport->tp_tdev->td_urb_error = 1;
wake_up_interruptible(&tport->tp_write_wait);
return;
default:
dev_err(dev, "%s - nonzero urb status, %d\n",
- __FUNCTION__, status );
+ __func__, status );
tport->tp_tdev->td_urb_error = 1;
wake_up_interruptible(&tport->tp_write_wait);
}
goto exit;
if (status) {
- dev_err(dev, "%s - stopping read!\n", __FUNCTION__);
+ dev_err(dev, "%s - stopping read!\n", __func__);
return;
}
if (port->tty && urb->actual_length) {
- usb_serial_debug_data(debug, dev, __FUNCTION__,
+ usb_serial_debug_data(debug, dev, __func__,
urb->actual_length, urb->transfer_buffer);
if (!tport->tp_is_open)
- dbg("%s - port closed, dropping data", __FUNCTION__);
+ dbg("%s - port closed, dropping data", __func__);
else
ti_recv(&urb->dev->dev, port->tty, urb->transfer_buffer,
urb->actual_length);
spin_unlock(&tport->tp_lock);
if (retval)
dev_err(dev, "%s - resubmit read urb failed, %d\n",
- __FUNCTION__, retval);
+ __func__, retval);
}
struct device *dev = &urb->dev->dev;
int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
tport->tp_write_urb_in_use = 0;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
- dbg("%s - urb shutting down, %d", __FUNCTION__, status);
+ dbg("%s - urb shutting down, %d", __func__, status);
tport->tp_tdev->td_urb_error = 1;
wake_up_interruptible(&tport->tp_write_wait);
return;
default:
dev_err(dev, "%s - nonzero urb status, %d\n",
- __FUNCTION__, status);
+ __func__, status);
tport->tp_tdev->td_urb_error = 1;
wake_up_interruptible(&tport->tp_write_wait);
}
do {
cnt = tty_buffer_request_room(tty, length);
if (cnt < length) {
- dev_err(dev, "%s - dropping data, %d bytes lost\n", __FUNCTION__, length - cnt);
+ dev_err(dev, "%s - dropping data, %d bytes lost\n", __func__, length - cnt);
if(cnt == 0)
break;
}
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&tport->tp_lock, flags);
spin_unlock_irqrestore(&tport->tp_lock, flags);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, port->write_urb->transfer_buffer);
+ usb_serial_debug_data(debug, &port->dev, __func__, count, port->write_urb->transfer_buffer);
usb_fill_bulk_urb(port->write_urb, port->serial->dev,
usb_sndbulkpipe(port->serial->dev,
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
- dev_err(&port->dev, "%s - submit write urb failed, %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - submit write urb failed, %d\n", __func__, result);
tport->tp_write_urb_in_use = 0;
/* TODO: reschedule ti_send */
} else {
int port_number = port->number - port->serial->minor;
struct ti_port_status *data;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
size = sizeof(struct ti_port_status);
data = kmalloc(size, GFP_KERNEL);
if (!data) {
- dev_err(&port->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err(&port->dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
status = ti_command_in_sync(tdev, TI_GET_PORT_STATUS,
(__u8)(TI_UART1_PORT+port_number), 0, (__u8 *)data, size);
if (status) {
- dev_err(&port->dev, "%s - get port status command failed, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - get port status command failed, %d\n", __func__, status);
goto free_data;
}
- dbg("%s - lsr 0x%02X", __FUNCTION__, data->bLSR);
+ dbg("%s - lsr 0x%02X", __func__, data->bLSR);
tport->tp_lsr = data->bLSR;
struct tty_struct *tty;
unsigned long flags;
- dbg("%s - msr 0x%02X", __FUNCTION__, msr);
+ dbg("%s - msr 0x%02X", __func__, msr);
if (msr & TI_MSR_DELTA_MASK) {
spin_lock_irqsave(&tport->tp_lock, flags);
struct usb_serial_port *port = tport->tp_port;
wait_queue_t wait;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irq(&tport->tp_lock);
struct ti_write_data_bytes *data;
struct device *dev = &tdev->td_serial->dev->dev;
- dbg("%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X", __FUNCTION__, addr, mask, byte);
+ dbg("%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X", __func__, addr, mask, byte);
size = sizeof(struct ti_write_data_bytes) + 2;
data = kmalloc(size, GFP_KERNEL);
if (!data) {
- dev_err(dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err(dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
(__u8 *)data, size);
if (status < 0)
- dev_err(dev, "%s - failed, %d\n", __FUNCTION__, status);
+ dev_err(dev, "%s - failed, %d\n", __func__, status);
kfree(data);
buffer_size = TI_FIRMWARE_BUF_SIZE + sizeof(struct ti_firmware_header);
buffer = kmalloc(buffer_size, GFP_KERNEL);
if (!buffer) {
- dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err(&dev->dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
header->wLength = cpu_to_le16((__u16)(buffer_size - sizeof(struct ti_firmware_header)));
header->bCheckSum = cs;
- dbg("%s - downloading firmware", __FUNCTION__);
+ dbg("%s - downloading firmware", __func__);
for (pos = 0; pos < buffer_size; pos += done) {
len = min(buffer_size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE);
status = usb_bulk_msg(dev, pipe, buffer+pos, len, &done, 1000);
kfree(buffer);
if (status) {
- dev_err(&dev->dev, "%s - error downloading firmware, %d\n", __FUNCTION__, status);
+ dev_err(&dev->dev, "%s - error downloading firmware, %d\n", __func__, status);
return status;
}
- dbg("%s - download successful", __FUNCTION__);
+ dbg("%s - download successful", __func__);
return 0;
}
unsigned int i, j;
int good_spot;
- dbg("%s %d", __FUNCTION__, num_ports);
+ dbg("%s %d", __func__, num_ports);
*minor = 0;
mutex_lock(&table_lock);
*minor = i;
j = 0;
- dbg("%s - minor base = %d", __FUNCTION__, *minor);
+ dbg("%s - minor base = %d", __func__, *minor);
for (i = *minor; (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i) {
serial_table[i] = serial;
serial->port[j++]->number = i;
{
int i;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
if (serial == NULL)
return;
serial = to_usb_serial(kref);
- dbg("%s - %s", __FUNCTION__, serial->type->description);
+ dbg("%s - %s", __func__, serial->type->description);
serial->type->shutdown(serial);
unsigned int portNumber;
int retval;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/* get the serial object associated with this tty pointer */
serial = usb_serial_get_by_index(tty->index);
if (!port)
return;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
mutex_lock(&port->mutex);
if (!port || port->serial->dev->state == USB_STATE_NOTATTACHED)
goto exit;
- dbg("%s - port %d, %d byte(s)", __FUNCTION__, port->number, count);
+ dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
if (!port->open_count) {
retval = -EINVAL;
- dbg("%s - port not opened", __FUNCTION__);
+ dbg("%s - port not opened", __func__);
goto exit;
}
if (!port)
goto exit;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (!port->open_count) {
- dbg("%s - port not open", __FUNCTION__);
+ dbg("%s - port not open", __func__);
goto exit;
}
if (!port)
goto exit;
- dbg("%s = port %d", __FUNCTION__, port->number);
+ dbg("%s = port %d", __func__, port->number);
if (!port->open_count) {
- dbg("%s - port not open", __FUNCTION__);
+ dbg("%s - port not open", __func__);
goto exit;
}
if (!port)
return;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (!port->open_count) {
- dbg ("%s - port not open", __FUNCTION__);
+ dbg ("%s - port not open", __func__);
return;
}
if (!port)
return;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (!port->open_count) {
- dbg("%s - port not open", __FUNCTION__);
+ dbg("%s - port not open", __func__);
return;
}
if (!port)
goto exit;
- dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd);
+ dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
/* Caution - port->open_count is BKL protected */
if (!port->open_count) {
- dbg ("%s - port not open", __FUNCTION__);
+ dbg ("%s - port not open", __func__);
goto exit;
}
if (!port)
return;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (!port->open_count) {
- dbg("%s - port not open", __FUNCTION__);
+ dbg("%s - port not open", __func__);
return;
}
return;
}
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (!port->open_count) {
- dbg("%s - port not open", __FUNCTION__);
+ dbg("%s - port not open", __func__);
unlock_kernel();
return;
}
off_t begin = 0;
char tmp[40];
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
length += sprintf (page, "usbserinfo:1.0 driver:2.0\n");
for (i = 0; i < SERIAL_TTY_MINORS && length < PAGE_SIZE; ++i) {
serial = usb_serial_get_by_index(i);
if (!port)
return -ENODEV;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (!port->open_count) {
- dbg("%s - port not open", __FUNCTION__);
+ dbg("%s - port not open", __func__);
return -ENODEV;
}
if (!port)
return -ENODEV;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (!port->open_count) {
- dbg("%s - port not open", __FUNCTION__);
+ dbg("%s - port not open", __func__);
return -ENODEV;
}
container_of(work, struct usb_serial_port, work);
struct tty_struct *tty;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (!port)
return;
{
struct usb_serial_port *port = to_usb_serial_port(dev);
- dbg ("%s - %s", __FUNCTION__, dev->bus_id);
+ dbg ("%s - %s", __func__, dev->bus_id);
port_free(port);
}
serial = kzalloc(sizeof(*serial), GFP_KERNEL);
if (!serial) {
- dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err(&dev->dev, "%s - out of memory\n", __func__);
return NULL;
}
serial->dev = usb_get_dev(dev);
serial = create_serial (dev, interface, type);
if (!serial) {
unlock_kernel();
- dev_err(&interface->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err(&interface->dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
serial->num_port_pointers = max_endpoints;
unlock_kernel();
- dbg("%s - setting up %d port structures for this device", __FUNCTION__, max_endpoints);
+ dbg("%s - setting up %d port structures for this device", __func__, max_endpoints);
for (i = 0; i < max_endpoints; ++i) {
port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL);
if (!port)
port->dev.release = &port_release;
snprintf (&port->dev.bus_id[0], sizeof(port->dev.bus_id), "ttyUSB%d", port->number);
- dbg ("%s - registering %s", __FUNCTION__, port->dev.bus_id);
+ dbg ("%s - registering %s", __func__, port->dev.bus_id);
retval = device_register(&port->dev);
if (retval)
dev_err(&port->dev, "Error registering port device, "
struct usb_serial_port *port;
usb_serial_console_disconnect(serial);
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
mutex_lock(&serial->disc_mutex);
usb_set_intfdata (interface, NULL);
result = bus_register(&usb_serial_bus_type);
if (result) {
- err("%s - registering bus driver failed", __FUNCTION__);
+ err("%s - registering bus driver failed", __func__);
goto exit_bus;
}
tty_set_operations(usb_serial_tty_driver, &serial_ops);
result = tty_register_driver(usb_serial_tty_driver);
if (result) {
- err("%s - tty_register_driver failed", __FUNCTION__);
+ err("%s - tty_register_driver failed", __func__);
goto exit_reg_driver;
}
/* register the USB driver */
result = usb_register(&usb_serial_driver);
if (result < 0) {
- err("%s - usb_register failed", __FUNCTION__);
+ err("%s - usb_register failed", __func__);
goto exit_tty;
}
/* register the generic driver, if we should */
result = usb_serial_generic_register(debug);
if (result < 0) {
- err("%s - registering generic driver failed", __FUNCTION__);
+ err("%s - registering generic driver failed", __func__);
goto exit_generic;
}
bus_unregister(&usb_serial_bus_type);
exit_bus:
- err ("%s - returning with error %d", __FUNCTION__, result);
+ err ("%s - returning with error %d", __func__, result);
put_tty_driver(usb_serial_tty_driver);
return result;
}
unsigned long flags;
int result = 0;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (!port->read_urb) {
/* this is needed for some brain dead Sony devices */
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result) {
dev_err(&port->dev, "%s - failed submitting read urb, error %d\n",
- __FUNCTION__, result);
+ __func__, result);
goto exit;
}
if (port->interrupt_in_urb) {
- dbg("%s - adding interrupt input for treo", __FUNCTION__);
+ dbg("%s - adding interrupt input for treo", __func__);
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result)
dev_err(&port->dev, "%s - failed submitting interrupt urb, error %d\n",
- __FUNCTION__, result);
+ __func__, result);
}
exit:
return result;
struct visor_private *priv = usb_get_serial_port_data(port);
unsigned char *transfer_buffer;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* shutdown our urbs */
usb_kill_urb(port->read_urb);
unsigned long flags;
int status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
if (priv->outstanding_urbs > URB_UPPER_LIMIT) {
spin_unlock_irqrestore(&priv->lock, flags);
- dbg("%s - write limit hit\n", __FUNCTION__);
+ dbg("%s - write limit hit\n", __func__);
return 0;
}
priv->outstanding_urbs++;
memcpy (buffer, buf, count);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, buffer);
+ usb_serial_debug_data(debug, &port->dev, __func__, count, buffer);
usb_fill_bulk_urb (urb, serial->dev,
usb_sndbulkpipe (serial->dev,
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed with status = %d\n",
- __FUNCTION__, status);
+ __func__, status);
count = status;
goto error;
} else {
struct visor_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/*
* We really can take anything the user throws at us
spin_lock_irqsave(&priv->lock, flags);
if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) {
spin_unlock_irqrestore(&priv->lock, flags);
- dbg("%s - write limit hit\n", __FUNCTION__);
+ dbg("%s - write limit hit\n", __func__);
return 0;
}
spin_unlock_irqrestore(&priv->lock, flags);
static int visor_chars_in_buffer (struct usb_serial_port *port)
{
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/*
* We can't really account for how much data we
/* free up the transfer buffer, as usb_free_urb() does not do this */
kfree (urb->transfer_buffer);
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (status)
dbg("%s - nonzero write bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
spin_lock_irqsave(&priv->lock, flags);
--priv->outstanding_urbs;
int result;
int available_room;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (status) {
dbg("%s - nonzero read bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
}
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+ usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
tty = port->tty;
if (tty && urb->actual_length) {
visor_read_bulk_callback, port);
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
} else {
priv->actually_throttled = 1;
}
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
default:
dbg("%s - nonzero urb status received: %d",
- __FUNCTION__, status);
+ __func__, status);
goto exit;
}
* Rumor has it this endpoint is used to notify when data
* is ready to be read from the bulk ones.
*/
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
+ usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, urb->transfer_buffer);
exit:
result = usb_submit_urb (urb, GFP_ATOMIC);
if (result)
dev_err(&urb->dev->dev, "%s - Error %d submitting interrupt urb\n",
- __FUNCTION__, result);
+ __func__, result);
}
static void visor_throttle (struct usb_serial_port *port)
struct visor_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
priv->throttled = 1;
spin_unlock_irqrestore(&priv->lock, flags);
unsigned long flags;
int result;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
priv->throttled = 0;
priv->actually_throttled = 0;
port->read_urb->dev = port->serial->dev;
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result);
}
static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_id *id)
int i;
int num_ports = 0;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
transfer_buffer = kmalloc (sizeof (*connection_info), GFP_KERNEL);
if (!transfer_buffer) {
- dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __FUNCTION__,
+ dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __func__,
sizeof(*connection_info));
return -ENOMEM;
}
sizeof(*connection_info), 300);
if (retval < 0) {
dev_err(dev, "%s - error %d getting connection information\n",
- __FUNCTION__, retval);
+ __func__, retval);
goto exit;
}
0x02, 300);
if (retval < 0)
dev_err(dev, "%s - error %d getting bytes available request\n",
- __FUNCTION__, retval);
+ __func__, retval);
retval = 0;
exit:
unsigned char *transfer_buffer;
int retval;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
transfer_buffer = kmalloc (sizeof (*connection_info), GFP_KERNEL);
if (!transfer_buffer) {
- dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __FUNCTION__,
+ dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __func__,
sizeof(*connection_info));
return -ENOMEM;
}
sizeof (*connection_info), 300);
if (retval < 0)
dev_err(dev, "%s - error %d getting connection info\n",
- __FUNCTION__, retval);
+ __func__, retval);
else
- usb_serial_debug_data(debug, &serial->dev->dev, __FUNCTION__,
+ usb_serial_debug_data(debug, &serial->dev->dev, __func__,
retval, transfer_buffer);
kfree (transfer_buffer);
int retval = 0;
int (*startup) (struct usb_serial *serial, const struct usb_device_id *id);
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
err("active config #%d != 1 ??",
int result;
u8 data;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/*
* Note that PEG-300 series devices expect the following two calls.
USB_REQ_GET_CONFIGURATION, USB_DIR_IN,
0, 0, &data, 1, 3000);
if (result < 0) {
- dev_err(dev, "%s: get config number failed: %d\n", __FUNCTION__, result);
+ dev_err(dev, "%s: get config number failed: %d\n", __func__, result);
return result;
}
if (result != 1) {
- dev_err(dev, "%s: get config number bad return length: %d\n", __FUNCTION__, result);
+ dev_err(dev, "%s: get config number bad return length: %d\n", __func__, result);
return -EIO;
}
USB_DIR_IN | USB_RECIP_INTERFACE,
0, 0, &data, 1, 3000);
if (result < 0) {
- dev_err(dev, "%s: get interface number failed: %d\n", __FUNCTION__, result);
+ dev_err(dev, "%s: get interface number failed: %d\n", __func__, result);
return result;
}
if (result != 1) {
- dev_err(dev, "%s: get interface number bad return length: %d\n", __FUNCTION__, result);
+ dev_err(dev, "%s: get interface number bad return length: %d\n", __func__, result);
return -EIO;
}
(serial->num_interrupt_in == 0))
goto generic_startup;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/*
* It appears that Treos and Kyoceras want to use the
static int clie_5_attach (struct usb_serial *serial)
{
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/* TH55 registers 2 ports.
Communication in from the UX50/TH55 uses bulk_in_endpointAddress from port 0
struct visor_private *priv;
int i;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
for (i = 0; i < serial->num_ports; i++) {
priv = usb_get_serial_port_data(serial->port[i]);
static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
{
- dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd);
+ dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
return -ENOIOCTLCMD;
}
int response;
const struct whiteheat_hex_record *record;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
response = ezusb_set_reset (serial, 1);
(unsigned char *)record->data, record->data_size, 0xa0);
if (response < 0) {
err("%s - ezusb_writememory failed for loader (%d %04X %p %d)",
- __FUNCTION__, response, record->address, record->data, record->data_size);
+ __func__, response, record->address, record->data, record->data_size);
break;
}
++record;
(unsigned char *)record->data, record->data_size, 0xa3);
if (response < 0) {
err("%s - ezusb_writememory failed for first firmware step (%d %04X %p %d)",
- __FUNCTION__, response, record->address, record->data, record->data_size);
+ __func__, response, record->address, record->data, record->data_size);
break;
}
++record;
(unsigned char *)record->data, record->data_size, 0xa0);
if (response < 0) {
err("%s - ezusb_writememory failed for second firmware step (%d %04X %p %d)",
- __FUNCTION__, response, record->address, record->data, record->data_size);
+ __func__, response, record->address, record->data, record->data_size);
break;
}
++record;
struct list_head *tmp2;
int i;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
/* free up our private data for our command port */
command_port = serial->port[COMMAND_PORT];
int retval = 0;
struct ktermios old_term;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
retval = start_command_port(port->serial);
if (retval)
/* Start reading from the device */
retval = start_port_read(port);
if (retval) {
- err("%s - failed submitting read urb, error %d", __FUNCTION__, retval);
+ err("%s - failed submitting read urb, error %d", __func__, retval);
firm_close(port);
stop_command_port(port->serial);
goto exit;
}
exit:
- dbg("%s - exit, retval = %d", __FUNCTION__, retval);
+ dbg("%s - exit, retval = %d", __func__, retval);
return retval;
}
struct list_head *tmp;
struct list_head *tmp2;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
mutex_lock(&port->serial->disc_mutex);
/* filp is NULL when called from usb_serial_disconnect */
unsigned long flags;
struct list_head *tmp;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (count == 0) {
- dbg("%s - write request of 0 bytes", __FUNCTION__);
+ dbg("%s - write request of 0 bytes", __func__);
return (0);
}
bytes = (count > port->bulk_out_size) ? port->bulk_out_size : count;
memcpy (urb->transfer_buffer, buf + sent, bytes);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, bytes, urb->transfer_buffer);
+ usb_serial_debug_data(debug, &port->dev, __func__, bytes, urb->transfer_buffer);
urb->dev = serial->dev;
urb->transfer_buffer_length = bytes;
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result) {
- err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
+ err("%s - failed submitting write urb, error %d", __func__, result);
sent = result;
spin_lock_irqsave(&info->lock, flags);
list_add(tmp, &info->tx_urbs_free);
int room = 0;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&info->lock, flags);
list_for_each(tmp, &info->tx_urbs_free)
spin_unlock_irqrestore(&info->lock, flags);
room *= port->bulk_out_size;
- dbg("%s - returns %d", __FUNCTION__, room);
+ dbg("%s - returns %d", __func__, room);
return (room);
}
struct whiteheat_private *info = usb_get_serial_port_data(port);
unsigned int modem_signals = 0;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
firm_get_dtr_rts(port);
if (info->mcr & UART_MCR_DTR)
{
struct whiteheat_private *info = usb_get_serial_port_data(port);
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (set & TIOCM_RTS)
info->mcr |= UART_MCR_RTS;
struct serial_struct serstruct;
void __user *user_arg = (void __user *)arg;
- dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd);
+ dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
switch (cmd) {
case TIOCGSERIAL:
static void whiteheat_set_termios(struct usb_serial_port *port, struct ktermios *old_termios)
{
- dbg("%s -port %d", __FUNCTION__, port->number);
+ dbg("%s -port %d", __func__, port->number);
firm_setup_port(port);
}
int chars = 0;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&info->lock, flags);
list_for_each(tmp, &info->tx_urbs_submitted) {
}
spin_unlock_irqrestore(&info->lock, flags);
- dbg ("%s - returns %d", __FUNCTION__, chars);
+ dbg ("%s - returns %d", __func__, chars);
return chars;
}
struct whiteheat_private *info = usb_get_serial_port_data(port);
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&info->lock, flags);
info->flags |= THROTTLED;
int actually_throttled;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&info->lock, flags);
actually_throttled = info->flags & ACTUALLY_THROTTLED;
{
int status = urb->status;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
if (status) {
dbg("nonzero urb status: %d", status);
unsigned char *data = urb->transfer_buffer;
int result;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
command_info = usb_get_serial_port_data(command_port);
if (!command_info) {
- dbg ("%s - command_info is NULL, exiting.", __FUNCTION__);
+ dbg ("%s - command_info is NULL, exiting.", __func__);
return;
}
if (status) {
- dbg("%s - nonzero urb status: %d", __FUNCTION__, status);
+ dbg("%s - nonzero urb status: %d", __func__, status);
if (status != -ENOENT)
command_info->command_finished = WHITEHEAT_CMD_FAILURE;
wake_up(&command_info->wait_command);
return;
}
- usb_serial_debug_data(debug, &command_port->dev, __FUNCTION__, urb->actual_length, data);
+ usb_serial_debug_data(debug, &command_port->dev, __func__, urb->actual_length, data);
if (data[0] == WHITEHEAT_CMD_COMPLETE) {
command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
wake_up(&command_info->wait_command);
} else if (data[0] == WHITEHEAT_EVENT) {
/* These are unsolicited reports from the firmware, hence no waiting command to wakeup */
- dbg("%s - event received", __FUNCTION__);
+ dbg("%s - event received", __func__);
} else if (data[0] == WHITEHEAT_GET_DTR_RTS) {
memcpy(command_info->result_buffer, &data[1], urb->actual_length - 1);
command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
wake_up(&command_info->wait_command);
} else {
- dbg("%s - bad reply from firmware", __FUNCTION__);
+ dbg("%s - bad reply from firmware", __func__);
}
/* Continue trying to always read */
command_port->read_urb->dev = command_port->serial->dev;
result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC);
if (result)
- dbg("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
+ dbg("%s - failed resubmitting read urb, error %d", __func__, result);
}
struct whiteheat_private *info = usb_get_serial_port_data(port);
int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock(&info->lock);
wrap = urb_to_wrap(urb, &info->rx_urbs_submitted);
if (!wrap) {
spin_unlock(&info->lock);
- err("%s - Not my urb!", __FUNCTION__);
+ err("%s - Not my urb!", __func__);
return;
}
list_del(&wrap->list);
if (status) {
dbg("%s - nonzero read bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
spin_lock(&info->lock);
list_add(&wrap->list, &info->rx_urbs_free);
spin_unlock(&info->lock);
return;
}
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+ usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
spin_lock(&info->lock);
list_add_tail(&wrap->list, &info->rx_urb_q);
struct whiteheat_urb_wrap *wrap;
int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock(&info->lock);
wrap = urb_to_wrap(urb, &info->tx_urbs_submitted);
if (!wrap) {
spin_unlock(&info->lock);
- err("%s - Not my urb!", __FUNCTION__);
+ err("%s - Not my urb!", __func__);
return;
}
list_move(&wrap->list, &info->tx_urbs_free);
if (status) {
dbg("%s - nonzero write bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
}
int retval = 0;
int t;
- dbg("%s - command %d", __FUNCTION__, command);
+ dbg("%s - command %d", __func__, command);
command_port = port->serial->port[COMMAND_PORT];
command_info = usb_get_serial_port_data(command_port);
command_port->write_urb->dev = port->serial->dev;
retval = usb_submit_urb (command_port->write_urb, GFP_NOIO);
if (retval) {
- dbg("%s - submit urb failed", __FUNCTION__);
+ dbg("%s - submit urb failed", __func__);
goto exit;
}
usb_kill_urb(command_port->write_urb);
if (command_info->command_finished == false) {
- dbg("%s - command timed out.", __FUNCTION__);
+ dbg("%s - command timed out.", __func__);
retval = -ETIMEDOUT;
goto exit;
}
if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) {
- dbg("%s - command failed.", __FUNCTION__);
+ dbg("%s - command failed.", __func__);
retval = -EIO;
goto exit;
}
if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) {
- dbg("%s - command completed.", __FUNCTION__);
+ dbg("%s - command completed.", __func__);
switch (command) {
case WHITEHEAT_GET_DTR_RTS:
info = usb_get_serial_port_data(port);
default:
case CS8: port_settings.bits = 8; break;
}
- dbg("%s - data bits = %d", __FUNCTION__, port_settings.bits);
+ dbg("%s - data bits = %d", __func__, port_settings.bits);
/* determine the parity */
if (cflag & PARENB)
port_settings.parity = WHITEHEAT_PAR_EVEN;
else
port_settings.parity = WHITEHEAT_PAR_NONE;
- dbg("%s - parity = %c", __FUNCTION__, port_settings.parity);
+ dbg("%s - parity = %c", __func__, port_settings.parity);
/* figure out the stop bits requested */
if (cflag & CSTOPB)
port_settings.stop = 2;
else
port_settings.stop = 1;
- dbg("%s - stop bits = %d", __FUNCTION__, port_settings.stop);
+ dbg("%s - stop bits = %d", __func__, port_settings.stop);
/* figure out the flow control settings */
if (cflag & CRTSCTS)
port_settings.hflow = (WHITEHEAT_HFLOW_CTS | WHITEHEAT_HFLOW_RTS);
else
port_settings.hflow = WHITEHEAT_HFLOW_NONE;
- dbg("%s - hardware flow control = %s %s %s %s", __FUNCTION__,
+ dbg("%s - hardware flow control = %s %s %s %s", __func__,
(port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "",
(port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "",
(port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "",
port_settings.sflow = WHITEHEAT_SFLOW_RXTX;
else
port_settings.sflow = WHITEHEAT_SFLOW_NONE;
- dbg("%s - software flow control = %c", __FUNCTION__, port_settings.sflow);
+ dbg("%s - software flow control = %c", __func__, port_settings.sflow);
port_settings.xon = START_CHAR(port->tty);
port_settings.xoff = STOP_CHAR(port->tty);
- dbg("%s - XON = %2x, XOFF = %2x", __FUNCTION__, port_settings.xon, port_settings.xoff);
+ dbg("%s - XON = %2x, XOFF = %2x", __func__, port_settings.xon, port_settings.xoff);
/* get the baud rate wanted */
port_settings.baud = tty_get_baud_rate(port->tty);
- dbg("%s - baud rate = %d", __FUNCTION__, port_settings.baud);
+ dbg("%s - baud rate = %d", __func__, port_settings.baud);
/* fixme: should set validated settings */
tty_encode_baud_rate(port->tty, port_settings.baud, port_settings.baud);
command_port->read_urb->dev = serial->dev;
retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL);
if (retval) {
- err("%s - failed submitting read urb, error %d", __FUNCTION__, retval);
+ err("%s - failed submitting read urb, error %d", __func__, retval);
goto exit;
}
}
urb->dev = port->serial->dev;
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result) {
- err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
+ err("%s - failed resubmitting read urb, error %d", __func__, result);
spin_lock_irqsave(&info->lock, flags);
list_add(tmp, &info->rx_urbs_free);
continue;
{
struct us_data *us = host_to_us(srb->device->host);
- US_DEBUGP("%s called\n", __FUNCTION__);
+ US_DEBUGP("%s called\n", __func__);
/* check for state-transition errors */
if (us->srb != NULL) {
printk(KERN_ERR USB_STORAGE "Error in %s: us->srb = %p\n",
- __FUNCTION__, us->srb);
+ __func__, us->srb);
return SCSI_MLQUEUE_HOST_BUSY;
}
{
struct us_data *us = host_to_us(srb->device->host);
- US_DEBUGP("%s called\n", __FUNCTION__);
+ US_DEBUGP("%s called\n", __func__);
/* us->srb together with the TIMED_OUT, RESETTING, and ABORTING
* bits are protected by the host lock. */
struct us_data *us = host_to_us(srb->device->host);
int result;
- US_DEBUGP("%s called\n", __FUNCTION__);
+ US_DEBUGP("%s called\n", __func__);
/* lock the device pointers and do the reset */
mutex_lock(&(us->dev_mutex));
struct us_data *us = host_to_us(srb->device->host);
int result;
- US_DEBUGP("%s called\n", __FUNCTION__);
+ US_DEBUGP("%s called\n", __func__);
result = usb_stor_port_reset(us);
return result < 0 ? FAILED : SUCCESS;
}
int status;
US_DEBUGP("%s: rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n",
- __FUNCTION__, request, requesttype,
+ __func__, request, requesttype,
value, index, size);
/* fill in the devrequest structure */
usb_settoggle(us->pusb_dev, usb_pipeendpoint(pipe),
usb_pipeout(pipe), 0);
- US_DEBUGP("%s: result = %d\n", __FUNCTION__, result);
+ US_DEBUGP("%s: result = %d\n", __func__, result);
return result;
}
int result;
US_DEBUGP("%s: rq=%02x rqtype=%02x value=%04x index=%02x len=%u\n",
- __FUNCTION__, request, requesttype,
+ __func__, request, requesttype,
value, index, size);
/* fill in the devrequest structure */
unsigned int pipe = us->recv_intr_pipe;
unsigned int maxp;
- US_DEBUGP("%s: xfer %u bytes\n", __FUNCTION__, length);
+ US_DEBUGP("%s: xfer %u bytes\n", __func__, length);
/* calculate the max packet size */
maxp = usb_maxpacket(us->pusb_dev, pipe, usb_pipeout(pipe));
{
int result;
- US_DEBUGP("%s: xfer %u bytes\n", __FUNCTION__, length);
+ US_DEBUGP("%s: xfer %u bytes\n", __func__, length);
/* fill and submit the URB */
usb_fill_bulk_urb(us->current_urb, us->pusb_dev, pipe, buf, length,
return USB_STOR_XFER_ERROR;
/* initialize the scatter-gather request block */
- US_DEBUGP("%s: xfer %u bytes, %d entries\n", __FUNCTION__,
+ US_DEBUGP("%s: xfer %u bytes, %d entries\n", __func__,
length, num_sg);
result = usb_sg_init(&us->current_sg, us->pusb_dev, pipe, 0,
sg, num_sg, length, GFP_NOIO);
/* Stop the current URB transfer */
void usb_stor_stop_transport(struct us_data *us)
{
- US_DEBUGP("%s called\n", __FUNCTION__);
+ US_DEBUGP("%s called\n", __func__);
/* If the state machine is blocked waiting for an URB,
* let's wake it up. The test_and_clear_bit() call
int usb_stor_CB_reset(struct us_data *us)
{
- US_DEBUGP("%s called\n", __FUNCTION__);
+ US_DEBUGP("%s called\n", __func__);
memset(us->iobuf, 0xFF, CB_RESET_CMD_SIZE);
us->iobuf[0] = SEND_DIAGNOSTIC;
*/
int usb_stor_Bulk_reset(struct us_data *us)
{
- US_DEBUGP("%s called\n", __FUNCTION__);
+ US_DEBUGP("%s called\n", __func__);
return usb_stor_reset_common(us, US_BULK_RESET_REQUEST,
USB_TYPE_CLASS | USB_RECIP_INTERFACE,
/* Wait until no command is running */
mutex_lock(&us->dev_mutex);
- US_DEBUGP("%s\n", __FUNCTION__);
+ US_DEBUGP("%s\n", __func__);
if (us->suspend_resume_hook)
(us->suspend_resume_hook)(us, US_SUSPEND);
mutex_lock(&us->dev_mutex);
- US_DEBUGP("%s\n", __FUNCTION__);
+ US_DEBUGP("%s\n", __func__);
if (us->suspend_resume_hook)
(us->suspend_resume_hook)(us, US_RESUME);
{
struct us_data *us = usb_get_intfdata(iface);
- US_DEBUGP("%s\n", __FUNCTION__);
+ US_DEBUGP("%s\n", __func__);
/* Report the reset to the SCSI core */
usb_stor_report_bus_reset(us);
{
struct us_data *us = usb_get_intfdata(iface);
- US_DEBUGP("%s\n", __FUNCTION__);
+ US_DEBUGP("%s\n", __func__);
/* Make sure no command runs during the reset */
mutex_lock(&us->dev_mutex);
{
struct us_data *us = usb_get_intfdata(iface);
- US_DEBUGP("%s\n", __FUNCTION__);
+ US_DEBUGP("%s\n", __func__);
/* Report the reset to the SCSI core */
usb_stor_report_bus_reset(us);
/* Associate our private data with the USB device */
static int associate_dev(struct us_data *us, struct usb_interface *intf)
{
- US_DEBUGP("-- %s\n", __FUNCTION__);
+ US_DEBUGP("-- %s\n", __func__);
/* Fill in the device-related fields */
us->pusb_dev = interface_to_usbdev(intf);
/* Release all our dynamic resources */
static void usb_stor_release_resources(struct us_data *us)
{
- US_DEBUGP("-- %s\n", __FUNCTION__);
+ US_DEBUGP("-- %s\n", __func__);
/* Tell the control thread to exit. The SCSI host must
* already have been removed so it won't try to queue
/* Dissociate from the USB device */
static void dissociate_dev(struct us_data *us)
{
- US_DEBUGP("-- %s\n", __FUNCTION__);
+ US_DEBUGP("-- %s\n", __func__);
kfree(us->sensebuf);
interface = usb_find_interface(&skel_driver, subminor);
if (!interface) {
err ("%s - error, can't find device for minor %d",
- __FUNCTION__, subminor);
+ __func__, subminor);
retval = -ENODEV;
goto exit;
}
urb->status == -ECONNRESET ||
urb->status == -ESHUTDOWN))
err("%s - nonzero write bulk status received: %d",
- __FUNCTION__, urb->status);
+ __func__, urb->status);
spin_lock(&dev->err_lock);
dev->errors = urb->status;
retval = usb_submit_urb(urb, GFP_KERNEL);
mutex_unlock(&dev->io_mutex);
if (retval) {
- err("%s - failed submitting write urb, error %d", __FUNCTION__, retval);
+ err("%s - failed submitting write urb, error %d", __func__, retval);
goto error_unanchor;
}
git.openpandora.org / pandora-kernel.git / commitdiff