net: phy: broadcom: extract register definitions

The Broadcom BCM54xx register definitions are shared between BCM54xx and
BCM7xx internal PHYs for which we are adding support. Extract these
register definitions and put them in include/linux/brcmphy.h for use by
the BCM7xxx internal PHY driver.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index f8c90ea..34088d6 100644 (file)
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -25,58 +25,6 @@
 #define BRCM_PHY_REV(phydev) \
        ((phydev)->drv->phy_id & ~((phydev)->drv->phy_id_mask))
 
-
-#define MII_BCM54XX_ECR                0x10    /* BCM54xx extended control register */
-#define MII_BCM54XX_ECR_IM     0x1000  /* Interrupt mask */
-#define MII_BCM54XX_ECR_IF     0x0800  /* Interrupt force */
-
-#define MII_BCM54XX_ESR                0x11    /* BCM54xx extended status register */
-#define MII_BCM54XX_ESR_IS     0x1000  /* Interrupt status */
-
-#define MII_BCM54XX_EXP_DATA   0x15    /* Expansion register data */
-#define MII_BCM54XX_EXP_SEL    0x17    /* Expansion register select */
-#define MII_BCM54XX_EXP_SEL_SSD        0x0e00  /* Secondary SerDes select */
-#define MII_BCM54XX_EXP_SEL_ER 0x0f00  /* Expansion register select */
-
-#define MII_BCM54XX_AUX_CTL    0x18    /* Auxiliary control register */
-#define MII_BCM54XX_ISR                0x1a    /* BCM54xx interrupt status register */
-#define MII_BCM54XX_IMR                0x1b    /* BCM54xx interrupt mask register */
-#define MII_BCM54XX_INT_CRCERR 0x0001  /* CRC error */
-#define MII_BCM54XX_INT_LINK   0x0002  /* Link status changed */
-#define MII_BCM54XX_INT_SPEED  0x0004  /* Link speed change */
-#define MII_BCM54XX_INT_DUPLEX 0x0008  /* Duplex mode changed */
-#define MII_BCM54XX_INT_LRS    0x0010  /* Local receiver status changed */
-#define MII_BCM54XX_INT_RRS    0x0020  /* Remote receiver status changed */
-#define MII_BCM54XX_INT_SSERR  0x0040  /* Scrambler synchronization error */
-#define MII_BCM54XX_INT_UHCD   0x0080  /* Unsupported HCD negotiated */
-#define MII_BCM54XX_INT_NHCD   0x0100  /* No HCD */
-#define MII_BCM54XX_INT_NHCDL  0x0200  /* No HCD link */
-#define MII_BCM54XX_INT_ANPR   0x0400  /* Auto-negotiation page received */
-#define MII_BCM54XX_INT_LC     0x0800  /* All counters below 128 */
-#define MII_BCM54XX_INT_HC     0x1000  /* Counter above 32768 */
-#define MII_BCM54XX_INT_MDIX   0x2000  /* MDIX status change */
-#define MII_BCM54XX_INT_PSERR  0x4000  /* Pair swap error */
-
-#define MII_BCM54XX_SHD                0x1c    /* 0x1c shadow registers */
-#define MII_BCM54XX_SHD_WRITE  0x8000
-#define MII_BCM54XX_SHD_VAL(x) ((x & 0x1f) << 10)
-#define MII_BCM54XX_SHD_DATA(x)        ((x & 0x3ff) << 0)
-
-/*
- * AUXILIARY CONTROL SHADOW ACCESS REGISTERS.  (PHY REG 0x18)
- */
-#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL      0x0000
-#define MII_BCM54XX_AUXCTL_ACTL_TX_6DB         0x0400
-#define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA      0x0800
-
-#define MII_BCM54XX_AUXCTL_MISC_WREN   0x8000
-#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX    0x0200
-#define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC     0x7000
-#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC        0x0007
-
-#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL      0x0000
-
-
 /*
  * Broadcom LED source encodings.  These are used in BCM5461, BCM5481,
  * BCM5482, and possibly some others.

diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 677b4f0..104e3ef 100644 (file)
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -33,4 +33,55 @@
 #define PHY_BRCM_DIS_TXCRXC_NOENRGY    0x00008000
 #define PHY_BCM_FLAGS_VALID            0x80000000
 
+/* Broadcom BCM54XX register definitions, common to most Broadcom PHYs */
+#define MII_BCM54XX_ECR                0x10    /* BCM54xx extended control register */
+#define MII_BCM54XX_ECR_IM     0x1000  /* Interrupt mask */
+#define MII_BCM54XX_ECR_IF     0x0800  /* Interrupt force */
+
+#define MII_BCM54XX_ESR                0x11    /* BCM54xx extended status register */
+#define MII_BCM54XX_ESR_IS     0x1000  /* Interrupt status */
+
+#define MII_BCM54XX_EXP_DATA   0x15    /* Expansion register data */
+#define MII_BCM54XX_EXP_SEL    0x17    /* Expansion register select */
+#define MII_BCM54XX_EXP_SEL_SSD        0x0e00  /* Secondary SerDes select */
+#define MII_BCM54XX_EXP_SEL_ER 0x0f00  /* Expansion register select */
+
+#define MII_BCM54XX_AUX_CTL    0x18    /* Auxiliary control register */
+#define MII_BCM54XX_ISR                0x1a    /* BCM54xx interrupt status register */
+#define MII_BCM54XX_IMR                0x1b    /* BCM54xx interrupt mask register */
+#define MII_BCM54XX_INT_CRCERR 0x0001  /* CRC error */
+#define MII_BCM54XX_INT_LINK   0x0002  /* Link status changed */
+#define MII_BCM54XX_INT_SPEED  0x0004  /* Link speed change */
+#define MII_BCM54XX_INT_DUPLEX 0x0008  /* Duplex mode changed */
+#define MII_BCM54XX_INT_LRS    0x0010  /* Local receiver status changed */
+#define MII_BCM54XX_INT_RRS    0x0020  /* Remote receiver status changed */
+#define MII_BCM54XX_INT_SSERR  0x0040  /* Scrambler synchronization error */
+#define MII_BCM54XX_INT_UHCD   0x0080  /* Unsupported HCD negotiated */
+#define MII_BCM54XX_INT_NHCD   0x0100  /* No HCD */
+#define MII_BCM54XX_INT_NHCDL  0x0200  /* No HCD link */
+#define MII_BCM54XX_INT_ANPR   0x0400  /* Auto-negotiation page received */
+#define MII_BCM54XX_INT_LC     0x0800  /* All counters below 128 */
+#define MII_BCM54XX_INT_HC     0x1000  /* Counter above 32768 */
+#define MII_BCM54XX_INT_MDIX   0x2000  /* MDIX status change */
+#define MII_BCM54XX_INT_PSERR  0x4000  /* Pair swap error */
+
+#define MII_BCM54XX_SHD                0x1c    /* 0x1c shadow registers */
+#define MII_BCM54XX_SHD_WRITE  0x8000
+#define MII_BCM54XX_SHD_VAL(x) ((x & 0x1f) << 10)
+#define MII_BCM54XX_SHD_DATA(x)        ((x & 0x3ff) << 0)
+
+/*
+ * AUXILIARY CONTROL SHADOW ACCESS REGISTERS.  (PHY REG 0x18)
+ */
+#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL      0x0000
+#define MII_BCM54XX_AUXCTL_ACTL_TX_6DB         0x0400
+#define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA      0x0800
+
+#define MII_BCM54XX_AUXCTL_MISC_WREN   0x8000
+#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX    0x0200
+#define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC     0x7000
+#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC        0x0007
+
+#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL      0x0000
+
 #endif /* _LINUX_BRCMPHY_H */