The below patch fixes some typos in various parts of the kernel, as well as fixes some comments.
Please let me know if I missed anything, and I will try to get it changed and resent.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* arch/arm/plat-omap/include/mach/serial.h
*
* Copyright (C) 2009 Texas Instruments
- * Addded OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
#endif /* CONFIG_PPC32 */
/* The "__do_*" operations below provide the actual "base" implementation
- * for each of the defined acccessor. Some of them use the out_* functions
+ * for each of the defined accessors. Some of them use the out_* functions
* directly, some of them still use EEH, though we might change that in the
* future. Those macros below provide the necessary argument swapping and
* handling of the IO base for PIO.
#define KL_GPIO_SOUND_POWER (KEYLARGO_GPIO_0+0x05)
-/* Hrm... this one is only to be used on Pismo. It seeem to also
+/* Hrm... this one is only to be used on Pismo. It seems to also
* control the timebase enable on other machines. Still to be
* experimented... --BenH.
*/
aa->n_arrays = *prop++;
aa->array_sz = *prop++;
- /* Now that we know the number of arrrays and size of each array,
+ /* Now that we know the number of arrays and size of each array,
* revalidate the size of the property read in.
*/
if (len < (aa->n_arrays * aa->array_sz + 2) * sizeof(unsigned int))
struct trap_per_cpu *tp = &trap_block[raw_smp_processor_id()];
struct mm_struct *mm = info;
- /* It is not valid to test "currrent->active_mm == mm" here.
+ /* It is not valid to test "current->active_mm == mm" here.
*
* The value of "current" is not changed atomically with
* switch_mm(). But that's OK, we just need to check the
*
* PARAMETERS: register_id - ID of ACPI Bit Register to access
* Value - Value to write to the register, in bit
- * position zero. The bit is automaticallly
+ * position zero. The bit is automatically
* shifted to the correct position.
*
* RETURN: Status
case XenbusStateConnected:
/*
* Ensure we connect even when two watches fire in
- * close successsion and we miss the intermediate value
+ * close succession and we miss the intermediate value
* of frontend_state.
*/
if (dev->state == XenbusStateConnected)
BT_CONTROL(BT_H_BUSY); /* set */
/*
- * Uncached, ordered writes should just proceeed serially but
+ * Uncached, ordered writes should just proceed serially but
* some BMCs don't clear B2H_ATN with one hit. Fast-path a
* workaround without too much penalty to the general case.
*/
/*
* The ibm,sdram-4xx-ddr2 Device Control Registers (DCRs) are
- * indirectly acccessed and have a base and length defined by the
+ * indirectly accessed and have a base and length defined by the
* device tree. The base can be anything; however, we expect the
* length to be precisely two registers, the first for the address
* window and the second for the data window.
if (zoran_formats[i].flags & flag && num++ == fmt->index) {
strncpy(fmt->description, zoran_formats[i].name,
sizeof(fmt->description) - 1);
- /* fmt struct pre-zeroed, so adding '\0' not neeed */
+ /* fmt struct pre-zeroed, so adding '\0' not needed */
fmt->pixelformat = zoran_formats[i].fourcc;
if (zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED)
fmt->flags |= V4L2_FMT_FLAG_COMPRESSED;
#define MPI_EVENT_SAS_DSCVRY_PHY_BITS_MASK (0xFFFF0000)
#define MPI_EVENT_SAS_DSCVRY_PHY_BITS_SHIFT (16)
-/* SAS Discovery Errror Event data */
+/* SAS Discovery Error Event data */
typedef struct _EVENT_DATA_DISCOVERY_ERROR
{
switch_bank(iobase, BANK0);
outb(inb(iobase+MCR) & ~MCR_DMA_EN, iobase+MCR);
- /* Check for underrrun! */
+ /* Check for underrun! */
if (inb(iobase+ASCR) & ASCR_TXUR) {
self->netdev->stats.tx_errors++;
self->netdev->stats.tx_fifo_errors++;
iobase = self->io.fir_base;
/* Disable DMA */
// DisableDmaChannel(self->io.dma);
- /* Check for underrrun! */
+ /* Check for underrun! */
/* Clear bit, by writing 1 into it */
Tx_status = GetTXStatus(iobase);
if (Tx_status & 0x08) {
self->netdev->stats.tx_errors++;
self->netdev->stats.tx_fifo_errors++;
hwreset(self);
-// how to clear underrrun ?
+ /* how to clear underrun? */
} else {
self->netdev->stats.tx_packets++;
ResetChip(iobase, 3);
switch_bank(iobase, SET0);
outb(inb(iobase+HCR) & ~HCR_EN_DMA, iobase+HCR);
- /* Check for underrrun! */
+ /* Check for underrun! */
if (inb(iobase+AUDR) & AUDR_UNDR) {
IRDA_DEBUG(0, "%s(), Transmit underrun!\n", __func__ );
* device is up and running or shutdown (through ifconfig up /
* down). Bus-generic only.
*
- * - control ops: control.c - implements various commmands for
+ * - control ops: control.c - implements various commands for
* controlling the device. bus-generic only.
*
* - device model glue: driver.c - implements helpers for the
bool int_migration = *(bool *) (val);
if (int_migration) {
- /* Set interrrupt migration timer and
- * corresponging Tx/Rx counter.
+ /* Set interrupt migration timer and
+ * corresponding Tx/Rx counter.
* timer 25ns*0xfa0=100us for 0xf packets.
* 0x306:Rx, 0x307:Tx */
rtl_write_dword(rtlpriv, REG_INT_MIG, 0xfe000fa0);
MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
-MODULE_DESCRIPTION("Parport Driver for Multiface 3 expansion cards Paralllel Port");
+MODULE_DESCRIPTION("Parport Driver for Multiface 3 expansion cards Parallel Port");
MODULE_SUPPORTED_DEVICE("Multiface 3 Parallel Port");
MODULE_LICENSE("GPL");
/*
- * Aic7xxx SCSI host adapter firmware asssembler
+ * Aic7xxx SCSI host adapter firmware assembler
*
* Copyright (c) 1997, 1998, 2000, 2001 Justin T. Gibbs.
* Copyright (c) 2001, 2002 Adaptec Inc.
/* */
/* Initialize a CCB to default values */
/* */
-/* ASSUMED to be callled from within a lock */
+/* ASSUMED to be called from within a lock */
/* */
/****************************************************************************/
static ips_scb_t *
uint8_t res4[0x36]; /* 8A-BF */
uint8_t iscsi_name[0xE0]; /* C0-19F : xxzzy Make this a
* pointer to a string so we
- * don't have to reserve soooo
+ * don't have to reserve so
* much RAM */
uint8_t link_local_ipv6_addr[0x10]; /* 1A0-1AF */
uint8_t res5[0x10]; /* 1B0-1BF */
*
* These are statically allocated. Trying to be clever was not worth it.
*
- * Dynamic allocation can fail, and we can't go deeep into the memory
+ * Dynamic allocation can fail, and we can't go deep into the memory
* allocator, since we're a SCSI driver, and trying too hard to allocate
* memory might generate disk I/O. We also don't want to fail disk I/O
* in that case because we can't get an allocation - the I/O could be
n = comedi_buf_write_alloc(s->async,
(7 + 12) * sizeof(unsigned int));
- /* If not enougth memory available, event is set to Comedi Buffer Errror */
+ /* If not enough memory available, event is set to Comedi Buffer Error */
if (n > ((7 + 12) * sizeof(unsigned int))) {
printk("\ncomedi_buf_write_alloc n = %i", n);
s->async->events |= COMEDI_CB_ERROR;
#define CFG_CH_DINV_TX 0x02
-/* Posssible resettable chipsets/functions */
+/* Possible resettable chipsets/functions */
#define RESET_DEV_TEMUX 1
#define RESET_DEV_TECT3 RESET_DEV_TEMUX
#define RESET_DEV_PLL 2
}
mdelay(1);
if (info->AsicID == ELECTRABUZZ_ID) {
- // set watermark to -1 in order to not generate an interrrupt
+ // set watermark to -1 in order to not generate an interrupt
ft1000_write_reg(dev, FT1000_REG_WATERMARK, 0xffff);
} else {
- // set watermark to -1 in order to not generate an interrrupt
+ // set watermark to -1 in order to not generate an interrupt
ft1000_write_reg(dev, FT1000_REG_MAG_WATERMARK, 0xffff);
}
// clear interrupts
mdelay(1);
- /* set watermark to -1 in order to not generate an interrrupt */
+ /* set watermark to -1 in order to not generate an interrupt */
ft1000_write_register(ft1000dev, 0xffff, FT1000_REG_MAG_WATERMARK);
/* clear interrupts */
EXPORT_SYMBOL_GPL(iio_dealloc_pollfunc);
/**
- * iio_trigger_read_currrent() - trigger consumer sysfs query which trigger
+ * iio_trigger_read_current() - trigger consumer sysfs query which trigger
*
* For trigger consumers the current_trigger interface allows the trigger
* used by the device to be queried.
/* Counter of lli array entry */
u32 array_counter;
- /* Init currrent table data size and lli array entry counter */
+ /* Init current table data size and lli array entry counter */
curr_table_data_size = 0;
array_counter = 0;
*num_table_entries_ptr = 1;
bool "Notify power errors"
depends on TIDSPBRIDGE
help
- Enable notifications to registered clients on the event of power errror
+ Enable notifications to registered clients on the event of power error
trying to suspend bridge driver. Say Y, to signal this event as a fatal
error, this will require a bridge restart to recover.
enum_refs = 0;
/*
- * TODO: Revisit, this is not an errror case but code
+ * TODO: Revisit, this is not an error case but code
* expects non-zero value.
*/
status = ENODATA;
encryption_value = 0;
}
- /* Set the encryption type for commmunicating with the device */
+ /* Set the encryption type for communicating with the device */
result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
USB_REQ_SET_ENCRYPTION,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
/* End handling */
/* =========================================== */
-/* Endpoint now idle - release it's ETD(s) or asssign to queued request */
+/* Endpoint now idle - release its ETD(s) or assign to queued request */
static void ep_idle(struct imx21 *imx21, struct ep_priv *ep_priv)
{
int i;
* Delayed pin detect interrupt processing.
*
* When the Mini-A cable is disconnected from the board,
- * the pin-detect interrupt happens before the disconnnect
+ * the pin-detect interrupt happens before the disconnect
* interrupts for the connected device(s). In order to
* process the disconnect interrupt(s) prior to switching
* roles, the pin-detect interrupts are delayed, and handled
*
* Data buffers to USB cannot be on the stack or in vmalloc'ed areas,
* so we copy it to the local i1480 buffer before proceeding. In any
- * case, we have a max size we can send, soooo.
+ * case, we have a max size we can send.
*/
static
int i1480_usb_write(struct i1480 *i1480, u32 memory_address,
};
/*
- * This is called in transaction commmit time. If there are no orphan
+ * This is called in transaction commit time. If there are no orphan
* files in the subvolume, it removes orphan item and frees block_rsv
* structure.
*/
* transaction, and VFS/VM ensures that ext3_truncate() cannot run
* simultaneously on behalf of the same inode.
*
- * As we work through the truncate and commmit bits of it to the journal there
+ * As we work through the truncate and commit bits of it to the journal there
* is one core, guiding principle: the file's tree must always be consistent on
* disk. We must be able to restart the truncate after a crash.
*
* transaction, and VFS/VM ensures that ext4_truncate() cannot run
* simultaneously on behalf of the same inode.
*
- * As we work through the truncate and commmit bits of it to the journal there
+ * As we work through the truncate and commit bits of it to the journal there
* is one core, guiding principle: the file's tree must always be consistent on
* disk. We must be able to restart the truncate after a crash.
*
/*
* XXX: If we run out of reserved DRC memory we could (up to a point)
* re-negotiate active sessions and reduce their slot usage to make
- * rooom for new connections. For now we just fail the create session.
+ * room for new connections. For now we just fail the create session.
*/
static int nfsd4_get_drc_mem(int slotsize, u32 num)
{
* remove_suid() calls ->setattr without any hint that
* we may have already done our cluster locking. Since
* ocfs2_setattr() *must* take cluster locks to
- * proceeed, this will lead us to recursively lock the
+ * proceed, this will lead us to recursively lock the
* inode. There's also the dinode i_size state which
* can be lost via setattr during extending writes (we
* set inode->i_size at the end of a write. */
/*
* First check if the VFS inode is marked dirty. All the dirtying
- * of non-transactional updates no goes through mark_inode_dirty*,
- * which allows us to distinguish beteeen pure timestamp updates
+ * of non-transactional updates do not go through mark_inode_dirty*,
+ * which allows us to distinguish between pure timestamp updates
* and i_size updates which need to be caught for fdatasync.
- * After that also theck for the dirty state in the XFS inode, which
+ * After that also check for the dirty state in the XFS inode, which
* might gets cleared when the inode gets written out via the AIL
* or xfs_iflush_cluster.
*/
* Insert the log items into the CIL and calculate the difference in space
* consumed by the item. Add the space to the checkpoint ticket and calculate
* if the change requires additional log metadata. If it does, take that space
- * as well. Remove the amount of space we addded to the checkpoint ticket from
+ * as well. Remove the amount of space we added to the checkpoint ticket from
* the current transaction ticket so that the accounting works out correctly.
*/
static void
* Specifically, the timestamp in @vblank_time should correspond as
* closely as possible to the time when the first video scanline of
* the video frame after the end of VBLANK will start scanning out,
- * the time immmediately after end of the VBLANK interval. If the
+ * the time immediately after end of the VBLANK interval. If the
* @crtc is currently inside VBLANK, this will be a time in the future.
* If the @crtc is currently scanning out a frame, this will be the
* past start time of the current scanout. This is meant to adhere
#define WANOPT_EVEN 2
/* CHDLC Protocol Options */
-/* DF Commmented out for now.
+/* DF Commented out for now.
#define WANOPT_CHDLC_NO_DCD IGNORE_DCD_FOR_LINK_STAT
#define WANOPT_CHDLC_NO_CTS IGNORE_CTS_FOR_LINK_STAT
* DOC: Beacon filter support
*
* Some hardware have beacon filter support to reduce host cpu wakeups
- * which will reduce system power consumption. It usuallly works so that
+ * which will reduce system power consumption. It usually works so that
* the firmware creates a checksum of the beacon but omits all constantly
* changing elements (TSF, TIM etc). Whenever the checksum changes the
* beacon is forwarded to the host, otherwise it will be just dropped. That
/* Is this the final fragment? */
if ((flags & IP_MF) == 0) {
/* If we already have some bits beyond end
- * or have different end, the segment is corrrupted.
+ * or have different end, the segment is corrupted.
*/
if (end < qp->q.len ||
((qp->q.last_in & INET_FRAG_LAST_IN) && end != qp->q.len))
local->tmp_channel = NULL;
/* If tmp_channel wasn't operating channel, then
* we need to go back on-channel.
- * NOTE: If we can ever be here while scannning,
+ * NOTE: If we can ever be here while scanning,
* or if the hw_config() channel config logic changes,
* then we may need to do a more thorough check to see if
* we still need to do a hardware config. Currently,
sctp_subtype_t subtype;
sctp_state_t state;
int error = 0;
- int first_time = 1; /* is this the first time through the looop */
+ int first_time = 1; /* is this the first time through the loop */
if (ep->base.dead)
return;
git.openpandora.org / pandora-kernel.git / commitdiff