IEEE80211_TX_SYNC_ACTION,
};
+/**
+ * enum ieee80211_frame_release_type - frame release reason
+ * @IEEE80211_FRAME_RELEASE_PSPOLL: frame released for PS-Poll
+ */
+enum ieee80211_frame_release_type {
+ IEEE80211_FRAME_RELEASE_PSPOLL,
+};
+
/**
* struct ieee80211_ops - callbacks from mac80211 to the driver
*
* The callback can sleep.
* @rssi_callback: Notify driver when the average RSSI goes above/below
* thresholds that were registered previously. The callback can sleep.
+ *
+ * @release_buffered_frames: Release buffered frames according to the given
+ * parameters. In the case where the driver buffers some frames for
+ * sleeping stations mac80211 will use this callback to tell the driver
+ * to release some frames, either for PS-poll or uAPSD.
+ * Note that if the @more_data paramter is %false the driver must check
+ * if there are more frames on the given TIDs, and if there are more than
+ * the frames being released then it must still set the more-data bit in
+ * the frame. If the @more_data parameter is %true, then of course the
+ * more-data bit must always be set.
+ * The @tids parameter tells the driver which TIDs to release frames
+ * from, for PS-poll it will always have only a single bit set.
+ * In the case this is used for uAPSD, the @num_frames parameter may be
+ * bigger than one, but the driver may send fewer frames (it must send
+ * at least one, however). In this case it is also responsible for
+ * setting the EOSP flag in the QoS header of the frames.
+ * This callback must be atomic.
*/
struct ieee80211_ops {
void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
const struct cfg80211_bitrate_mask *mask);
void (*rssi_callback)(struct ieee80211_hw *hw,
enum ieee80211_rssi_event rssi_event);
+
+ void (*release_buffered_frames)(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta,
+ u16 tids, int num_frames,
+ enum ieee80211_frame_release_type reason,
+ bool more_data);
};
/**
local->ops->rssi_callback(&local->hw, event);
trace_drv_return_void(local);
}
+
+static inline void
+drv_release_buffered_frames(struct ieee80211_local *local,
+ struct sta_info *sta, u16 tids, int num_frames,
+ enum ieee80211_frame_release_type reason,
+ bool more_data)
+{
+ trace_drv_release_buffered_frames(local, &sta->sta, tids, num_frames,
+ reason, more_data);
+ if (local->ops->release_buffered_frames)
+ local->ops->release_buffered_frames(&local->hw, &sta->sta, tids,
+ num_frames, reason,
+ more_data);
+ trace_drv_return_void(local);
+}
#endif /* __MAC80211_DRIVER_OPS */
)
);
+TRACE_EVENT(drv_release_buffered_frames,
+ TP_PROTO(struct ieee80211_local *local,
+ struct ieee80211_sta *sta,
+ u16 tids, int num_frames,
+ enum ieee80211_frame_release_type reason,
+ bool more_data),
+
+ TP_ARGS(local, sta, tids, num_frames, reason, more_data),
+
+ TP_STRUCT__entry(
+ LOCAL_ENTRY
+ STA_ENTRY
+ __field(u16, tids)
+ __field(int, num_frames)
+ __field(int, reason)
+ __field(bool, more_data)
+ ),
+
+ TP_fast_assign(
+ LOCAL_ASSIGN;
+ STA_ASSIGN;
+ __entry->tids = tids;
+ __entry->num_frames = num_frames;
+ __entry->reason = reason;
+ __entry->more_data = more_data;
+ ),
+
+ TP_printk(
+ LOCAL_PR_FMT STA_PR_FMT
+ " TIDs:0x%.4x frames:%d reason:%d more:%d",
+ LOCAL_PR_ARG, STA_PR_ARG, __entry->tids, __entry->num_frames,
+ __entry->reason, __entry->more_data
+ )
+);
+
/*
* Tracing for API calls that drivers call.
*/
struct ieee80211_sub_if_data *sdata = sta->sdata;
struct ieee80211_local *local = sdata->local;
struct sk_buff *skb = NULL;
+ bool found = false;
bool more_data = false;
int ac;
+ unsigned long driver_release_tids = 0;
u8 ignore_for_response = sta->sta.uapsd_queues;
/*
* Get response frame and more data bit for it.
*/
for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
+ unsigned long tids;
+
if (ignore_for_response & BIT(ac))
continue;
- if (!skb) {
- skb = skb_dequeue(&sta->tx_filtered[ac]);
- if (!skb) {
- skb = skb_dequeue(&sta->ps_tx_buf[ac]);
+ tids = ieee80211_tids_for_ac(ac);
+
+ if (!found) {
+ driver_release_tids = sta->driver_buffered_tids & tids;
+ if (driver_release_tids) {
+ found = true;
+ } else {
+ skb = skb_dequeue(&sta->tx_filtered[ac]);
+ if (!skb) {
+ skb = skb_dequeue(&sta->ps_tx_buf[ac]);
+ if (skb)
+ local->total_ps_buffered--;
+ }
if (skb)
- local->total_ps_buffered--;
+ found = true;
}
- }
- /* FIXME: take into account driver-buffered frames */
+ /*
+ * If the driver has data on more than one TID then
+ * certainly there's more data if we release just a
+ * single frame now (from a single TID).
+ */
+ if (hweight16(driver_release_tids) > 1) {
+ more_data = true;
+ driver_release_tids =
+ BIT(ffs(driver_release_tids) - 1);
+ break;
+ }
+ }
if (!skb_queue_empty(&sta->tx_filtered[ac]) ||
!skb_queue_empty(&sta->ps_tx_buf[ac])) {
}
}
+ if (!found) {
+#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
+ /*
+ * FIXME: This can be the result of a race condition between
+ * us expiring a frame and the station polling for it.
+ * Should we send it a null-func frame indicating we
+ * have nothing buffered for it?
+ */
+ printk(KERN_DEBUG "%s: STA %pM sent PS Poll even "
+ "though there are no buffered frames for it\n",
+ sdata->name, sta->sta.addr);
+#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
+
+ return;
+ }
+
if (skb) {
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr =
ieee80211_add_pending_skb(local, skb);
sta_info_recalc_tim(sta);
-#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
} else {
/*
- * FIXME: This can be the result of a race condition between
- * us expiring a frame and the station polling for it.
- * Should we send it a null-func frame indicating we
- * have nothing buffered for it?
+ * We need to release a frame that is buffered somewhere in the
+ * driver ... it'll have to handle that.
+ * Note that, as per the comment above, it'll also have to see
+ * if there is more than just one frame on the specific TID that
+ * we're releasing from, and it needs to set the more-data bit
+ * accordingly if we tell it that there's no more data. If we do
+ * tell it there's more data, then of course the more-data bit
+ * needs to be set anyway.
+ */
+ drv_release_buffered_frames(local, sta, driver_release_tids,
+ 1, IEEE80211_FRAME_RELEASE_PSPOLL,
+ more_data);
+
+ /*
+ * Note that we don't recalculate the TIM bit here as it would
+ * most likely have no effect at all unless the driver told us
+ * that the TID became empty before returning here from the
+ * release function.
+ * Either way, however, when the driver tells us that the TID
+ * became empty we'll do the TIM recalculation.
*/
- printk(KERN_DEBUG "%s: STA %pM sent PS Poll even "
- "though there are no buffered frames for it\n",
- sdata->name, sta->sta.addr);
-#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
}
}
git.openpandora.org / pandora-kernel.git / commitdiff