-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
-
- Module Name:
- aironet.h
-
- Abstract:
-
- Revision History:
- Who When What
- -------- ---------- ----------------------------------------------
- Name Date Modification logs
- Paul Lin 04-06-15 Initial
-*/
-
-#ifndef __AIRONET_H__
-#define __AIRONET_H__
-
-// Measurement Type definition
-#define MSRN_TYPE_UNUSED 0
-#define MSRN_TYPE_CHANNEL_LOAD_REQ 1
-#define MSRN_TYPE_NOISE_HIST_REQ 2
-#define MSRN_TYPE_BEACON_REQ 3
-#define MSRN_TYPE_FRAME_REQ 4
-
-// Scan Mode in Beacon Request
-#define MSRN_SCAN_MODE_PASSIVE 0
-#define MSRN_SCAN_MODE_ACTIVE 1
-#define MSRN_SCAN_MODE_BEACON_TABLE 2
-
-// PHY type definition for Aironet beacon report, CCX 2 table 36-9
-#define PHY_FH 1
-#define PHY_DSS 2
-#define PHY_UNUSED 3
-#define PHY_OFDM 4
-#define PHY_HR_DSS 5
-#define PHY_ERP 6
-
-// RPI table in dBm
-#define RPI_0 0 // Power <= -87
-#define RPI_1 1 // -87 < Power <= -82
-#define RPI_2 2 // -82 < Power <= -77
-#define RPI_3 3 // -77 < Power <= -72
-#define RPI_4 4 // -72 < Power <= -67
-#define RPI_5 5 // -67 < Power <= -62
-#define RPI_6 6 // -62 < Power <= -57
-#define RPI_7 7 // -57 < Power
-
-// Cisco Aironet IAPP definetions
-#define AIRONET_IAPP_TYPE 0x32
-#define AIRONET_IAPP_SUBTYPE_REQUEST 0x01
-#define AIRONET_IAPP_SUBTYPE_REPORT 0x81
-
-// Measurement Request detail format
-typedef struct _MEASUREMENT_REQUEST {
- UCHAR Channel;
- UCHAR ScanMode; // Use only in beacon request, other requests did not use this field
- USHORT Duration;
-} MEASUREMENT_REQUEST, *PMEASUREMENT_REQUEST;
-
-// Beacon Measurement Report
-// All these field might change to UCHAR, because we didn't do anything to these report.
-// We copy all these beacons and report to CCX 2 AP.
-typedef struct _BEACON_REPORT {
- UCHAR Channel;
- UCHAR Spare;
- USHORT Duration;
- UCHAR PhyType; // Definiation is listed above table 36-9
- UCHAR RxPower;
- UCHAR BSSID[6];
- UCHAR ParentTSF[4];
- UCHAR TargetTSF[8];
- USHORT BeaconInterval;
- USHORT CapabilityInfo;
-} BEACON_REPORT, *PBEACON_REPORT;
-
-// Frame Measurement Report (Optional)
-typedef struct _FRAME_REPORT {
- UCHAR Channel;
- UCHAR Spare;
- USHORT Duration;
- UCHAR TA;
- UCHAR BSSID[6];
- UCHAR RSSI;
- UCHAR Count;
-} FRAME_REPORT, *PFRAME_REPORT;
-
-#pragma pack(1)
-// Channel Load Report
-typedef struct _CHANNEL_LOAD_REPORT {
- UCHAR Channel;
- UCHAR Spare;
- USHORT Duration;
- UCHAR CCABusy;
-} CHANNEL_LOAD_REPORT, *PCHANNEL_LOAD_REPORT;
-#pragma pack()
-
-// Nosie Histogram Report
-typedef struct _NOISE_HIST_REPORT {
- UCHAR Channel;
- UCHAR Spare;
- USHORT Duration;
- UCHAR Density[8];
-} NOISE_HIST_REPORT, *PNOISE_HIST_REPORT;
-
-// Radio Management Capability element
-typedef struct _RADIO_MANAGEMENT_CAPABILITY {
- UCHAR Eid; // TODO: Why the Eid is 1 byte, not normal 2 bytes???
- UCHAR Length;
- UCHAR AironetOui[3]; // AIronet OUI (00 40 96)
- UCHAR Type; // Type / Version
- USHORT Status; // swap16 required
-} RADIO_MANAGEMENT_CAPABILITY, *PRADIO_MANAGEMENT_CAPABILITY;
-
-// Measurement Mode Bit definition
-typedef struct _MEASUREMENT_MODE {
- UCHAR Rsvd:4;
- UCHAR Report:1;
- UCHAR NotUsed:1;
- UCHAR Enable:1;
- UCHAR Parallel:1;
-} MEASUREMENT_MODE, *PMEASUREMENT_MODE;
-
-// Measurement Request element, This is little endian mode
-typedef struct _MEASUREMENT_REQUEST_ELEMENT {
- USHORT Eid;
- USHORT Length; // swap16 required
- USHORT Token; // non-zero unique token
- UCHAR Mode; // Measurement Mode
- UCHAR Type; // Measurement type
-} MEASUREMENT_REQUEST_ELEMENT, *PMEASUREMENT_REQUEST_ELEMENT;
-
-// Measurement Report element, This is little endian mode
-typedef struct _MEASUREMENT_REPORT_ELEMENT {
- USHORT Eid;
- USHORT Length; // swap16 required
- USHORT Token; // non-zero unique token
- UCHAR Mode; // Measurement Mode
- UCHAR Type; // Measurement type
-} MEASUREMENT_REPORT_ELEMENT, *PMEASUREMENT_REPORT_ELEMENT;
-
-// Cisco Aironet IAPP Frame Header, Network byte order used
-typedef struct _AIRONET_IAPP_HEADER {
- UCHAR CiscoSnapHeader[8]; // 8 bytes Cisco snap header
- USHORT Length; // IAPP ID & length, remember to swap16 in LE system
- UCHAR Type; // IAPP type
- UCHAR SubType; // IAPP subtype
- UCHAR DA[6]; // Destination MAC address
- UCHAR SA[6]; // Source MAC address
- USHORT Token; // Dialog token, no need to swap16 since it is for yoken usage only
-} AIRONET_IAPP_HEADER, *PAIRONET_IAPP_HEADER;
-
-// Radio Measurement Request frame
-typedef struct _AIRONET_RM_REQUEST_FRAME {
- AIRONET_IAPP_HEADER IAPP; // Common header
- UCHAR Delay; // Activation Delay
- UCHAR Offset; // Measurement offset
-} AIRONET_RM_REQUEST_FRAME, *PAIRONET_RM_REQUEST_FRAME;
-
-// Radio Measurement Report frame
-typedef struct _AIRONET_RM_REPORT_FRAME {
- AIRONET_IAPP_HEADER IAPP; // Common header
-} AIRONET_RM_REPORT_FRAME, *PAIRONET_RM_REPORT_FRAME;
-
-// Saved element request actions which will saved in StaCfg.
-typedef struct _RM_REQUEST_ACTION {
- MEASUREMENT_REQUEST_ELEMENT ReqElem; // Saved request element
- MEASUREMENT_REQUEST Measurement; // Saved measurement within the request element
-} RM_REQUEST_ACTION, *PRM_REQUEST_ACTION;
-
-// CCX administration control
-typedef union _CCX_CONTROL {
- struct {
- UINT32 Enable:1; // Enable CCX2
- UINT32 LeapEnable:1; // Enable LEAP at CCX2
- UINT32 RMEnable:1; // Radio Measurement Enable
- UINT32 DCRMEnable:1; // Non serving channel Radio Measurement enable
- UINT32 QOSEnable:1; // Enable QOS for CCX 2.0 support
- UINT32 FastRoamEnable:1; // Enable fast roaming
- UINT32 Rsvd:2; // Not used
- UINT32 dBmToRoam:8; // the condition to roam when receiving Rssi less than this value. It's negative value.
- UINT32 TuLimit:16; // Limit for different channel scan
- } field;
- UINT32 word;
-} CCX_CONTROL, *PCCX_CONTROL;
-
-#endif // __AIRONET_H__
+#include "../rt2860/aironet.h"
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
-
- Module Name:
- ap.h
-
- Abstract:
- Miniport generic portion header file
-
- Revision History:
- Who When What
- -------- ---------- ----------------------------------------------
- Paul Lin 08-01-2002 created
- James Tan 09-06-2002 modified (Revise NTCRegTable)
- John Chang 12-22-2004 modified for RT2561/2661. merge with STA driver
-*/
-#ifndef __AP_H__
-#define __AP_H__
-
-
-
-// ========================= AP RTMP.h ================================
-
-
-
-// =============================================================
-// Function Prototypes
-// =============================================================
-
-// ap_data.c
-
-BOOLEAN APBridgeToWirelessSta(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pHeader,
- IN UINT HdrLen,
- IN PUCHAR pData,
- IN UINT DataLen,
- IN ULONG fromwdsidx);
-
-BOOLEAN APHandleRxDoneInterrupt(
- IN PRTMP_ADAPTER pAd);
-
-VOID APSendPackets(
- IN NDIS_HANDLE MiniportAdapterContext,
- IN PPNDIS_PACKET ppPacketArray,
- IN UINT NumberOfPackets);
-
-NDIS_STATUS APSendPacket(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket);
-
-
-NDIS_STATUS APHardTransmit(
- IN PRTMP_ADAPTER pAd,
- IN TX_BLK *pTxBlk,
- IN UCHAR QueIdx);
-
-VOID APRxEAPOLFrameIndicate(
- IN PRTMP_ADAPTER pAd,
- IN MAC_TABLE_ENTRY *pEntry,
- IN RX_BLK *pRxBlk,
- IN UCHAR FromWhichBSSID);
-
-NDIS_STATUS APCheckRxError(
- IN PRTMP_ADAPTER pAd,
- IN PRT28XX_RXD_STRUC pRxD,
- IN UCHAR Wcid);
-
-BOOLEAN APCheckClass2Class3Error(
- IN PRTMP_ADAPTER pAd,
- IN ULONG Wcid,
- IN PHEADER_802_11 pHeader);
-
-VOID APHandleRxPsPoll(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pAddr,
- IN USHORT Aid,
- IN BOOLEAN isActive);
-
-VOID RTMPDescriptorEndianChange(
- IN PUCHAR pData,
- IN ULONG DescriptorType);
-
-VOID RTMPFrameEndianChange(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pData,
- IN ULONG Dir,
- IN BOOLEAN FromRxDoneInt);
-
-// ap_assoc.c
-
-VOID APAssocStateMachineInit(
- IN PRTMP_ADAPTER pAd,
- IN STATE_MACHINE *S,
- OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID APPeerAssocReqAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID APPeerReassocReqAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID APPeerDisassocReqAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID MbssKickOutStas(
- IN PRTMP_ADAPTER pAd,
- IN INT apidx,
- IN USHORT Reason);
-
-VOID APMlmeKickOutSta(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pStaAddr,
- IN UCHAR Wcid,
- IN USHORT Reason);
-
-VOID APMlmeDisassocReqAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID APCls3errAction(
- IN PRTMP_ADAPTER pAd,
- IN ULONG Wcid,
- IN PHEADER_802_11 pHeader);
-
-
-USHORT APBuildAssociation(
- IN PRTMP_ADAPTER pAd,
- IN MAC_TABLE_ENTRY *pEntry,
- IN USHORT CapabilityInfo,
- IN UCHAR MaxSupportedRateIn500Kbps,
- IN UCHAR *RSN,
- IN UCHAR *pRSNLen,
- IN BOOLEAN bWmmCapable,
- IN ULONG RalinkIe,
- IN HT_CAPABILITY_IE *pHtCapability,
- IN UCHAR HtCapabilityLen,
- OUT USHORT *pAid);
-
-// ap_auth.c
-
-void APAuthStateMachineInit(
- IN PRTMP_ADAPTER pAd,
- IN STATE_MACHINE *Sm,
- OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID APMlmeDeauthReqAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID APCls2errAction(
- IN PRTMP_ADAPTER pAd,
- IN ULONG Wcid,
- IN PHEADER_802_11 pHeader);
-
-// ap_authrsp.c
-
-VOID APAuthRspStateMachineInit(
- IN PRTMP_ADAPTER pAd,
- IN PSTATE_MACHINE Sm,
- IN STATE_MACHINE_FUNC Trans[]);
-
-VOID APPeerAuthAtAuthRspIdleAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID APPeerDeauthReqAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID APPeerAuthSimpleRspGenAndSend(
- IN PRTMP_ADAPTER pAd,
- IN PHEADER_802_11 pHdr80211,
- IN USHORT Alg,
- IN USHORT Seq,
- IN USHORT StatusCode);
-
-// ap_connect.c
-
-BOOLEAN BeaconTransmitRequired(
- IN PRTMP_ADAPTER pAd,
- IN INT apidx);
-
-VOID APMakeBssBeacon(
- IN PRTMP_ADAPTER pAd,
- IN INT apidx);
-
-VOID APUpdateBeaconFrame(
- IN PRTMP_ADAPTER pAd,
- IN INT apidx);
-
-VOID APMakeAllBssBeacon(
- IN PRTMP_ADAPTER pAd);
-
-VOID APUpdateAllBeaconFrame(
- IN PRTMP_ADAPTER pAd);
-
-
-// ap_sync.c
-
-VOID APSyncStateMachineInit(
- IN PRTMP_ADAPTER pAd,
- IN STATE_MACHINE *Sm,
- OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID APScanTimeout(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-VOID APInvalidStateWhenScan(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID APScanTimeoutAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID APPeerProbeReqAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID APPeerBeaconAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID APMlmeScanReqAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID APPeerBeaconAtScanAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID APScanCnclAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID ApSiteSurvey(
- IN PRTMP_ADAPTER pAd);
-
-VOID SupportRate(
- IN PUCHAR SupRate,
- IN UCHAR SupRateLen,
- IN PUCHAR ExtRate,
- IN UCHAR ExtRateLen,
- OUT PUCHAR *Rates,
- OUT PUCHAR RatesLen,
- OUT PUCHAR pMaxSupportRate);
-
-
-BOOLEAN ApScanRunning(
- IN PRTMP_ADAPTER pAd);
-
-// ap_wpa.c
-
-VOID APWpaStateMachineInit(
- IN PRTMP_ADAPTER pAd,
- IN STATE_MACHINE *Sm,
- OUT STATE_MACHINE_FUNC Trans[]);
-
-// ap_mlme.c
-
-VOID APMlmePeriodicExec(
- IN PRTMP_ADAPTER pAd);
-
-VOID APMlmeSelectTxRateTable(
- IN PRTMP_ADAPTER pAd,
- IN PMAC_TABLE_ENTRY pEntry,
- IN PUCHAR *ppTable,
- IN PUCHAR pTableSize,
- IN PUCHAR pInitTxRateIdx);
-
-VOID APMlmeSetTxRate(
- IN PRTMP_ADAPTER pAd,
- IN PMAC_TABLE_ENTRY pEntry,
- IN PRTMP_TX_RATE_SWITCH pTxRate);
-
-VOID APMlmeDynamicTxRateSwitching(
- IN PRTMP_ADAPTER pAd);
-
-VOID APQuickResponeForRateUpExec(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-BOOLEAN APMsgTypeSubst(
- IN PRTMP_ADAPTER pAd,
- IN PFRAME_802_11 pFrame,
- OUT INT *Machine,
- OUT INT *MsgType);
-
-VOID APQuickResponeForRateUpExec(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-#ifdef RT2870
-VOID BeaconUpdateExec(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-#endif // RT2870 //
-
-VOID RTMPSetPiggyBack(
- IN PRTMP_ADAPTER pAd,
- IN BOOLEAN bPiggyBack);
-
-VOID APAsicEvaluateRxAnt(
- IN PRTMP_ADAPTER pAd);
-
-VOID APAsicRxAntEvalTimeout(
- IN PRTMP_ADAPTER pAd);
-
-// ap.c
-
-VOID APSwitchChannel(
- IN PRTMP_ADAPTER pAd,
- IN INT Channel);
-
-NDIS_STATUS APInitialize(
- IN PRTMP_ADAPTER pAd);
-
-VOID APShutdown(
- IN PRTMP_ADAPTER pAd);
-
-VOID APStartUp(
- IN PRTMP_ADAPTER pAd);
-
-VOID APStop(
- IN PRTMP_ADAPTER pAd);
-
-VOID APCleanupPsQueue(
- IN PRTMP_ADAPTER pAd,
- IN PQUEUE_HEADER pQueue);
-
-VOID MacTableReset(
- IN PRTMP_ADAPTER pAd);
-
-MAC_TABLE_ENTRY *MacTableInsertEntry(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pAddr,
- IN UCHAR apidx,
- IN BOOLEAN CleanAll);
-
-BOOLEAN MacTableDeleteEntry(
- IN PRTMP_ADAPTER pAd,
- IN USHORT wcid,
- IN PUCHAR pAddr);
-
-MAC_TABLE_ENTRY *MacTableLookup(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pAddr);
-
-VOID MacTableMaintenance(
- IN PRTMP_ADAPTER pAd);
-
-UINT32 MacTableAssocStaNumGet(
- IN PRTMP_ADAPTER pAd);
-
-MAC_TABLE_ENTRY *APSsPsInquiry(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pAddr,
- OUT SST *Sst,
- OUT USHORT *Aid,
- OUT UCHAR *PsMode,
- OUT UCHAR *Rate);
-
-BOOLEAN APPsIndicate(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pAddr,
- IN ULONG Wcid,
- IN UCHAR Psm);
-
-VOID ApLogEvent(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pAddr,
- IN USHORT Event);
-
-VOID APUpdateOperationMode(
- IN PRTMP_ADAPTER pAd);
-
-VOID APUpdateCapabilityAndErpIe(
- IN PRTMP_ADAPTER pAd);
-
-BOOLEAN ApCheckAccessControlList(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pAddr,
- IN UCHAR Apidx);
-
-VOID ApUpdateAccessControlList(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Apidx);
-
-VOID ApEnqueueNullFrame(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pAddr,
- IN UCHAR TxRate,
- IN UCHAR PID,
- IN UCHAR apidx,
- IN BOOLEAN bQosNull,
- IN BOOLEAN bEOSP,
- IN UCHAR OldUP);
-
-VOID ApSendFrame(
- IN PRTMP_ADAPTER pAd,
- IN PVOID pBuffer,
- IN ULONG Length,
- IN UCHAR TxRate,
- IN UCHAR PID);
-
-VOID ApEnqueueAckFrame(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pAddr,
- IN UCHAR TxRate,
- IN UCHAR apidx);
-
-UCHAR APAutoSelectChannel(
- IN PRTMP_ADAPTER pAd,
- IN BOOLEAN Optimal);
-
-// ap_sanity.c
-
-
-BOOLEAN PeerAssocReqCmmSanity(
- IN PRTMP_ADAPTER pAd,
- IN BOOLEAN isRessoc,
- IN VOID *Msg,
- IN ULONG MsgLen,
- OUT PUCHAR pAddr2,
- OUT USHORT *pCapabilityInfo,
- OUT USHORT *pListenInterval,
- OUT PUCHAR pApAddr,
- OUT UCHAR *pSsidLen,
- OUT char *Ssid,
- OUT UCHAR *pRatesLen,
- OUT UCHAR Rates[],
- OUT UCHAR *RSN,
- OUT UCHAR *pRSNLen,
- OUT BOOLEAN *pbWmmCapable,
- OUT ULONG *pRalinkIe,
- OUT UCHAR *pHtCapabilityLen,
- OUT HT_CAPABILITY_IE *pHtCapability);
-
-BOOLEAN PeerDisassocReqSanity(
- IN PRTMP_ADAPTER pAd,
- IN VOID *Msg,
- IN ULONG MsgLen,
- OUT PUCHAR pAddr2,
- OUT USHORT *Reason);
-
-BOOLEAN PeerDeauthReqSanity(
- IN PRTMP_ADAPTER pAd,
- IN VOID *Msg,
- IN ULONG MsgLen,
- OUT PUCHAR pAddr2,
- OUT USHORT *Reason);
-
-BOOLEAN APPeerAuthSanity(
- IN PRTMP_ADAPTER pAd,
- IN VOID *Msg,
- IN ULONG MsgLen,
- OUT PUCHAR pAddr1,
- OUT PUCHAR pAddr2,
- OUT USHORT *Alg,
- OUT USHORT *Seq,
- OUT USHORT *Status,
- CHAR *ChlgText);
-
-BOOLEAN APPeerProbeReqSanity(
- IN PRTMP_ADAPTER pAd,
- IN VOID *Msg,
- IN ULONG MsgLen,
- OUT PUCHAR pAddr2,
- OUT CHAR Ssid[],
- OUT UCHAR *SsidLen);
-
-BOOLEAN APPeerBeaconAndProbeRspSanity(
- IN PRTMP_ADAPTER pAd,
- IN VOID *Msg,
- IN ULONG MsgLen,
- OUT PUCHAR pAddr2,
- OUT PUCHAR pBssid,
- OUT CHAR Ssid[],
- OUT UCHAR *SsidLen,
- OUT UCHAR *BssType,
- OUT USHORT *BeaconPeriod,
- OUT UCHAR *Channel,
- OUT LARGE_INTEGER *Timestamp,
- OUT USHORT *CapabilityInfo,
- OUT UCHAR Rate[],
- OUT UCHAR *RateLen,
- OUT BOOLEAN *ExtendedRateIeExist,
- OUT UCHAR *Erp);
-
-
-// ================== end of AP RTMP.h ========================
-
-
-#endif // __AP_H__
-
+#include "../rt2860/ap.h"
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
-
- Module Name:
- chlist.c
-
- Abstract:
-
- Revision History:
- Who When What
- -------- ---------- ----------------------------------------------
- Fonchi Wu 2007-12-19 created
-*/
-
-#ifndef __CHLIST_H__
-#define __CHLIST_H__
-
-#include "rtmp_type.h"
-#include "rtmp_def.h"
-
-
-#define ODOR 0
-#define IDOR 1
-#define BOTH 2
-
-#define BAND_5G 0
-#define BAND_24G 1
-#define BAND_BOTH 2
-
-typedef struct _CH_DESP {
- UCHAR FirstChannel;
- UCHAR NumOfCh;
- CHAR MaxTxPwr; // dBm
- UCHAR Geography; // 0:out door, 1:in door, 2:both
- BOOLEAN DfsReq; // Dfs require, 0: No, 1: yes.
-} CH_DESP, *PCH_DESP;
-
-typedef struct _CH_REGION {
- UCHAR CountReg[3];
- UCHAR DfsType; // 0: CE, 1: FCC, 2: JAP, 3:JAP_W53, JAP_W56
- CH_DESP ChDesp[10];
-} CH_REGION, *PCH_REGION;
-
-static CH_REGION ChRegion[] =
-{
- { // Antigua and Berbuda
- "AG",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, BOTH, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, BOTH, FALSE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, FALSE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Argentina
- "AR",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 52, 4, 24, BOTH, FALSE}, // 5G, ch 52~64
- { 149, 4, 30, BOTH, FALSE}, // 5G, ch 149~161
- { 0}, // end
- }
- },
-
- { // Aruba
- "AW",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, BOTH, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, BOTH, FALSE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, FALSE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Australia
- "AU",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, BOTH, FALSE}, // 5G, ch 36~48
- { 52, 4, 24, BOTH, FALSE}, // 5G, ch 52~64
- { 149, 5, 30, BOTH, FALSE}, // 5G, ch 149~165
- { 0}, // end
- }
- },
-
- { // Austria
- "AT",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, TRUE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, TRUE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Bahamas
- "BS",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, BOTH, FALSE}, // 5G, ch 36~48
- { 52, 4, 24, BOTH, FALSE}, // 5G, ch 52~64
- { 149, 5, 30, BOTH, FALSE}, // 5G, ch 149~165
- { 0}, // end
- }
- },
-
- { // Barbados
- "BB",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, BOTH, FALSE}, // 5G, ch 36~48
- { 52, 4, 24, BOTH, FALSE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, FALSE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Bermuda
- "BM",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, BOTH, FALSE}, // 5G, ch 36~48
- { 52, 4, 24, BOTH, FALSE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, FALSE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Brazil
- "BR",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, BOTH, FALSE}, // 5G, ch 36~48
- { 52, 4, 24, BOTH, FALSE}, // 5G, ch 52~64
- { 100, 11, 24, BOTH, FALSE}, // 5G, ch 100~140
- { 149, 5, 30, BOTH, FALSE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Belgium
- "BE",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 18, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 18, IDOR, FALSE}, // 5G, ch 52~64
- { 0}, // end
- }
- },
-
- { // Bulgaria
- "BG",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 100, 11, 30, ODOR, TRUE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Canada
- "CA",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, BOTH, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, BOTH, FALSE}, // 5G, ch 52~64
- { 149, 5, 30, BOTH, FALSE}, // 5G, ch 149~165
- { 0}, // end
- }
- },
-
- { // Cayman IsLands
- "KY",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, BOTH, FALSE}, // 5G, ch 36~48
- { 52, 4, 24, BOTH, FALSE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, FALSE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Chile
- "CL",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 20, BOTH, FALSE}, // 5G, ch 36~48
- { 52, 4, 20, BOTH, FALSE}, // 5G, ch 52~64
- { 149, 5, 20, BOTH, FALSE}, // 5G, ch 149~165
- { 0}, // end
- }
- },
-
- { // China
- "CN",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 149, 4, 27, BOTH, FALSE}, // 5G, ch 149~161
- { 0}, // end
- }
- },
-
- { // Colombia
- "CO",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 17, BOTH, FALSE}, // 5G, ch 36~48
- { 52, 4, 24, BOTH, FALSE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, FALSE}, // 5G, ch 100~140
- { 149, 5, 30, BOTH, FALSE}, // 5G, ch 149~165
- { 0}, // end
- }
- },
-
- { // Costa Rica
- "CR",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 17, BOTH, FALSE}, // 5G, ch 36~48
- { 52, 4, 24, BOTH, FALSE}, // 5G, ch 52~64
- { 149, 4, 30, BOTH, FALSE}, // 5G, ch 149~161
- { 0}, // end
- }
- },
-
- { // Cyprus
- "CY",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 24, IDOR, TRUE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, TRUE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Czech_Republic
- "CZ",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 0}, // end
- }
- },
-
- { // Denmark
- "DK",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, TRUE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Dominican Republic
- "DO",
- CE,
- {
- { 1, 0, 20, BOTH, FALSE}, // 2.4 G, ch 0
- { 149, 4, 20, BOTH, FALSE}, // 5G, ch 149~161
- { 0}, // end
- }
- },
-
- { // Equador
- "EC",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 100, 11, 27, BOTH, FALSE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // El Salvador
- "SV",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 30, BOTH, TRUE}, // 5G, ch 52~64
- { 149, 4, 36, BOTH, TRUE}, // 5G, ch 149~165
- { 0}, // end
- }
- },
-
- { // Finland
- "FI",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, TRUE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // France
- "FR",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 0}, // end
- }
- },
-
- { // Germany
- "DE",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, TRUE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Greece
- "GR",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 100, 11, 30, ODOR, TRUE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Guam
- "GU",
- CE,
- {
- { 1, 11, 20, BOTH, FALSE}, // 2.4 G, ch 1~11
- { 36, 4, 17, BOTH, FALSE}, // 5G, ch 36~48
- { 52, 4, 24, BOTH, FALSE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, FALSE}, // 5G, ch 100~140
- { 149, 5, 30, BOTH, FALSE}, // 5G, ch 149~165
- { 0}, // end
- }
- },
-
- { // Guatemala
- "GT",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 17, BOTH, FALSE}, // 5G, ch 36~48
- { 52, 4, 24, BOTH, FALSE}, // 5G, ch 52~64
- { 149, 4, 30, BOTH, FALSE}, // 5G, ch 149~161
- { 0}, // end
- }
- },
-
- { // Haiti
- "HT",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 17, BOTH, FALSE}, // 5G, ch 36~48
- { 52, 4, 24, BOTH, FALSE}, // 5G, ch 52~64
- { 149, 4, 30, BOTH, FALSE}, // 5G, ch 149~161
- { 0}, // end
- }
- },
-
- { // Honduras
- "HN",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 149, 4, 27, BOTH, FALSE}, // 5G, ch 149~161
- { 0}, // end
- }
- },
-
- { // Hong Kong
- "HK",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, FALSE}, // 5G, ch 52~64
- { 149, 4, 30, BOTH, FALSE}, // 5G, ch 149~161
- { 0}, // end
- }
- },
-
- { // Hungary
- "HU",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 0}, // end
- }
- },
-
- { // Iceland
- "IS",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, TRUE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // India
- "IN",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 149, 4, 24, IDOR, FALSE}, // 5G, ch 149~161
- { 0}, // end
- }
- },
-
- { // Indonesia
- "ID",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 149, 4, 27, BOTH, FALSE}, // 5G, ch 149~161
- { 0}, // end
- }
- },
-
- { // Ireland
- "IE",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 100, 11, 30, ODOR, TRUE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Israel
- "IL",
- CE,
- {
- { 1, 3, 20, IDOR, FALSE}, // 2.4 G, ch 1~3
- { 4, 6, 20, BOTH, FALSE}, // 2.4 G, ch 4~9
- { 10, 4, 20, IDOR, FALSE}, // 2.4 G, ch 10~13
- { 0}, // end
- }
- },
-
- { // Italy
- "IT",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 100, 11, 30, ODOR, TRUE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Japan
- "JP",
- JAP,
- {
- { 1, 14, 20, BOTH, FALSE}, // 2.4 G, ch 1~14
-#ifndef RT30xx
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
-#endif
-#ifdef RT30xx
- { 34, 4, 23, IDOR, FALSE}, // 5G, ch 34~46
-#endif
- { 0}, // end
- }
- },
-
- { // Jordan
- "JO",
- CE,
- {
- { 1, 13, 20, IDOR, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 149, 4, 23, IDOR, FALSE}, // 5G, ch 149~161
- { 0}, // end
- }
- },
-
- { // Latvia
- "LV",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, TRUE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Liechtenstein
- "LI",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, TRUE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Lithuania
- "LT",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, TRUE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Luxemburg
- "LU",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, TRUE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Malaysia
- "MY",
- CE,
- {
- { 36, 4, 23, BOTH, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, BOTH, FALSE}, // 5G, ch 52~64
- { 149, 5, 20, BOTH, FALSE}, // 5G, ch 149~165
- { 0}, // end
- }
- },
-
- { // Malta
- "MT",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, TRUE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Marocco
- "MA",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 24, IDOR, FALSE}, // 5G, ch 36~48
- { 0}, // end
- }
- },
-
- { // Mexico
- "MX",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, BOTH, FALSE}, // 5G, ch 36~48
- { 52, 4, 24, BOTH, FALSE}, // 5G, ch 52~64
- { 149, 5, 30, IDOR, FALSE}, // 5G, ch 149~165
- { 0}, // end
- }
- },
-
- { // Netherlands
- "NL",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 24, IDOR, TRUE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, TRUE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // New Zealand
- "NZ",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 24, BOTH, FALSE}, // 5G, ch 36~48
- { 52, 4, 24, BOTH, FALSE}, // 5G, ch 52~64
- { 149, 4, 30, BOTH, FALSE}, // 5G, ch 149~161
- { 0}, // end
- }
- },
-
- { // Norway
- "NO",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 24, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 24, IDOR, TRUE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, TRUE}, // 5G, ch 149~161
- { 0}, // end
- }
- },
-
- { // Peru
- "PE",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 149, 4, 27, BOTH, FALSE}, // 5G, ch 149~161
- { 0}, // end
- }
- },
-
- { // Portugal
- "PT",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, TRUE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Poland
- "PL",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, TRUE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Romania
- "RO",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, TRUE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Russia
- "RU",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 149, 4, 20, IDOR, FALSE}, // 5G, ch 149~161
- { 0}, // end
- }
- },
-
- { // Saudi Arabia
- "SA",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, BOTH, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, BOTH, FALSE}, // 5G, ch 52~64
- { 149, 4, 23, BOTH, FALSE}, // 5G, ch 149~161
- { 0}, // end
- }
- },
-
- { // Serbia_and_Montenegro
- "CS",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 0}, // end
- }
- },
-
- { // Singapore
- "SG",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, BOTH, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, BOTH, FALSE}, // 5G, ch 52~64
- { 149, 4, 20, BOTH, FALSE}, // 5G, ch 149~161
- { 0}, // end
- }
- },
-
- { // Slovakia
- "SK",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, TRUE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Slovenia
- "SI",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 0}, // end
- }
- },
-
- { // South Africa
- "ZA",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, BOTH, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, FALSE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, TRUE}, // 5G, ch 100~140
- { 149, 4, 30, BOTH, FALSE}, // 5G, ch 149~161
- { 0}, // end
- }
- },
-
- { // South Korea
- "KR",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 20, BOTH, FALSE}, // 5G, ch 36~48
- { 52, 4, 20, BOTH, FALSE}, // 5G, ch 52~64
- { 100, 8, 20, BOTH, FALSE}, // 5G, ch 100~128
- { 149, 4, 20, BOTH, FALSE}, // 5G, ch 149~161
- { 0}, // end
- }
- },
-
- { // Spain
- "ES",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 17, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, TRUE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Sweden
- "SE",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, TRUE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Switzerland
- "CH",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~13
- { 36, 4, 23, IDOR, TRUE}, // 5G, ch 36~48
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 0}, // end
- }
- },
-
- { // Taiwan
- "TW",
- CE,
- {
- { 1, 11, 30, BOTH, FALSE}, // 2.4 G, ch 1~11
- { 52, 4, 23, IDOR, FALSE}, // 5G, ch 52~64
- { 0}, // end
- }
- },
-
- { // Turkey
- "TR",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~11
- { 36, 4, 23, BOTH, FALSE}, // 5G, ch 36~48
- { 52, 4, 23, BOTH, FALSE}, // 5G, ch 52~64
- { 0}, // end
- }
- },
-
- { // UK
- "GB",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~11
- { 36, 4, 23, IDOR, FALSE}, // 5G, ch 52~64
- { 52, 4, 23, IDOR, TRUE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, TRUE}, // 5G, ch 100~140
- { 0}, // end
- }
- },
-
- { // Ukraine
- "UA",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~11
- { 0}, // end
- }
- },
-
- { // United_Arab_Emirates
- "AE",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~11
- { 0}, // end
- }
- },
-
- { // United_States
- "US",
- CE,
- {
- { 1, 11, 30, BOTH, FALSE}, // 2.4 G, ch 1~11
- { 36, 4, 17, IDOR, FALSE}, // 5G, ch 52~64
- { 52, 4, 24, BOTH, TRUE}, // 5G, ch 52~64
- { 100, 11, 30, BOTH, TRUE}, // 5G, ch 100~140
- { 149, 5, 30, BOTH, FALSE}, // 5G, ch 149~165
- { 0}, // end
- }
- },
-
- { // Venezuela
- "VE",
- CE,
- {
- { 1, 13, 20, BOTH, FALSE}, // 2.4 G, ch 1~11
- { 149, 4, 27, BOTH, FALSE}, // 5G, ch 149~161
- { 0}, // end
- }
- },
-
- { // Default
- "",
- CE,
- {
- { 1, 11, 20, BOTH, FALSE}, // 2.4 G, ch 1~11
- { 36, 4, 20, BOTH, FALSE}, // 5G, ch 52~64
- { 52, 4, 20, BOTH, FALSE}, // 5G, ch 52~64
- { 100, 11, 20, BOTH, FALSE}, // 5G, ch 100~140
- { 149, 5, 20, BOTH, FALSE}, // 5G, ch 149~165
- { 0}, // end
- }
- },
-};
-
-static inline PCH_REGION GetChRegion(
- IN PUCHAR CntryCode)
-{
- INT loop = 0;
- PCH_REGION pChRegion = NULL;
-
- while (strcmp(ChRegion[loop].CountReg, "") != 0)
- {
- if (strncmp(ChRegion[loop].CountReg, CntryCode, 2) == 0)
- {
- pChRegion = &ChRegion[loop];
- break;
- }
- loop++;
- }
-
- if (pChRegion == NULL)
- pChRegion = &ChRegion[loop];
- return pChRegion;
-}
-
-static inline VOID ChBandCheck(
- IN UCHAR PhyMode,
- OUT PUCHAR pChType)
-{
- switch(PhyMode)
- {
- case PHY_11A:
- case PHY_11AN_MIXED:
- *pChType = BAND_5G;
- break;
- case PHY_11ABG_MIXED:
- case PHY_11AGN_MIXED:
- case PHY_11ABGN_MIXED:
- *pChType = BAND_BOTH;
- break;
-
- default:
- *pChType = BAND_24G;
- break;
- }
-}
-
-static inline UCHAR FillChList(
- IN PRTMP_ADAPTER pAd,
- IN PCH_DESP pChDesp,
- IN UCHAR Offset,
- IN UCHAR increment)
-{
- INT i, j, l;
- UCHAR channel;
-
- j = Offset;
- for (i = 0; i < pChDesp->NumOfCh; i++)
- {
- channel = pChDesp->FirstChannel + i * increment;
- for (l=0; l<MAX_NUM_OF_CHANNELS; l++)
- {
- if (channel == pAd->TxPower[l].Channel)
- {
- pAd->ChannelList[j].Power = pAd->TxPower[l].Power;
- pAd->ChannelList[j].Power2 = pAd->TxPower[l].Power2;
- break;
- }
- }
- if (l == MAX_NUM_OF_CHANNELS)
- continue;
-
- pAd->ChannelList[j].Channel = pChDesp->FirstChannel + i * increment;
- pAd->ChannelList[j].MaxTxPwr = pChDesp->MaxTxPwr;
- pAd->ChannelList[j].DfsReq = pChDesp->DfsReq;
- j++;
- }
- pAd->ChannelListNum = j;
-
- return j;
-}
-
-static inline VOID CreateChList(
- IN PRTMP_ADAPTER pAd,
- IN PCH_REGION pChRegion,
- IN UCHAR Geography)
-{
- INT i;
- UCHAR offset = 0;
- PCH_DESP pChDesp;
- UCHAR ChType;
- UCHAR increment;
-
- if (pChRegion == NULL)
- return;
-
- ChBandCheck(pAd->CommonCfg.PhyMode, &ChType);
-
- for (i=0; i<10; i++)
- {
- pChDesp = &pChRegion->ChDesp[i];
- if (pChDesp->FirstChannel == 0)
- break;
-
- if (ChType == BAND_5G)
- {
- if (pChDesp->FirstChannel <= 14)
- continue;
- }
- else if (ChType == BAND_24G)
- {
- if (pChDesp->FirstChannel > 14)
- continue;
- }
-
- if ((pChDesp->Geography == BOTH)
- || (pChDesp->Geography == Geography))
- {
- if (pChDesp->FirstChannel > 14)
- increment = 4;
- else
- increment = 1;
- offset = FillChList(pAd, pChDesp, offset, increment);
- }
- }
-}
-
-static inline VOID BuildChannelListEx(
- IN PRTMP_ADAPTER pAd)
-{
- PCH_REGION pChReg;
-
- pChReg = GetChRegion(pAd->CommonCfg.CountryCode);
- CreateChList(pAd, pChReg, pAd->CommonCfg.Geography);
-}
-
-static inline VOID BuildBeaconChList(
- IN PRTMP_ADAPTER pAd,
- OUT PUCHAR pBuf,
- OUT PULONG pBufLen)
-{
- INT i;
- ULONG TmpLen;
- PCH_REGION pChRegion;
- PCH_DESP pChDesp;
- UCHAR ChType;
-
- pChRegion = GetChRegion(pAd->CommonCfg.CountryCode);
-
- if (pChRegion == NULL)
- return;
-
- ChBandCheck(pAd->CommonCfg.PhyMode, &ChType);
- *pBufLen = 0;
-
- for (i=0; i<10; i++)
- {
- pChDesp = &pChRegion->ChDesp[i];
- if (pChDesp->FirstChannel == 0)
- break;
-
- if (ChType == BAND_5G)
- {
- if (pChDesp->FirstChannel <= 14)
- continue;
- }
- else if (ChType == BAND_24G)
- {
- if (pChDesp->FirstChannel > 14)
- continue;
- }
-
- if ((pChDesp->Geography == BOTH)
- || (pChDesp->Geography == pAd->CommonCfg.Geography))
- {
- MakeOutgoingFrame(pBuf + *pBufLen, &TmpLen,
- 1, &pChDesp->FirstChannel,
- 1, &pChDesp->NumOfCh,
- 1, &pChDesp->MaxTxPwr,
- END_OF_ARGS);
- *pBufLen += TmpLen;
- }
- }
-}
-
-static inline BOOLEAN IsValidChannel(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR channel)
-
-{
- INT i;
-
- for (i = 0; i < pAd->ChannelListNum; i++)
- {
- if (pAd->ChannelList[i].Channel == channel)
- break;
- }
-
- if (i == pAd->ChannelListNum)
- return FALSE;
- else
- return TRUE;
-}
-
-
-static inline UCHAR GetExtCh(
- IN UCHAR Channel,
- IN UCHAR Direction)
-{
- CHAR ExtCh;
-
- if (Direction == EXTCHA_ABOVE)
- ExtCh = Channel + 4;
- else
- ExtCh = (Channel - 4) > 0 ? (Channel - 4) : 0;
-
- return ExtCh;
-}
-
-
-static inline VOID N_ChannelCheck(
- IN PRTMP_ADAPTER pAd)
-{
- //UCHAR ChannelNum = pAd->ChannelListNum;
- UCHAR Channel = pAd->CommonCfg.Channel;
-
- if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) && (pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40))
- {
- if (Channel > 14)
- {
- if ((Channel == 36) || (Channel == 44) || (Channel == 52) || (Channel == 60) || (Channel == 100) || (Channel == 108) ||
- (Channel == 116) || (Channel == 124) || (Channel == 132) || (Channel == 149) || (Channel == 157))
- {
- pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_ABOVE;
- }
- else if ((Channel == 40) || (Channel == 48) || (Channel == 56) || (Channel == 64) || (Channel == 104) || (Channel == 112) ||
- (Channel == 120) || (Channel == 128) || (Channel == 136) || (Channel == 153) || (Channel == 161))
- {
- pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_BELOW;
- }
- else
- {
- pAd->CommonCfg.RegTransmitSetting.field.BW = BW_20;
- }
- }
- else
- {
- do
- {
- UCHAR ExtCh;
- UCHAR Dir = pAd->CommonCfg.RegTransmitSetting.field.EXTCHA;
- ExtCh = GetExtCh(Channel, Dir);
- if (IsValidChannel(pAd, ExtCh))
- break;
-
- Dir = (Dir == EXTCHA_ABOVE) ? EXTCHA_BELOW : EXTCHA_ABOVE;
- ExtCh = GetExtCh(Channel, Dir);
- if (IsValidChannel(pAd, ExtCh))
- {
- pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = Dir;
- break;
- }
- pAd->CommonCfg.RegTransmitSetting.field.BW = BW_20;
- } while(FALSE);
-
- if (Channel == 14)
- {
- pAd->CommonCfg.RegTransmitSetting.field.BW = BW_20;
- //pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_NONE; // We didn't set the ExtCh as NONE due to it'll set in RTMPSetHT()
- }
- }
- }
-
-
-}
-
-
-static inline VOID N_SetCenCh(
- IN PRTMP_ADAPTER pAd)
-{
- if (pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40)
- {
- if (pAd->CommonCfg.RegTransmitSetting.field.EXTCHA == EXTCHA_ABOVE)
- {
- pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel + 2;
- }
- else
- {
- if (pAd->CommonCfg.Channel == 14)
- pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel - 1;
- else
- pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel - 2;
- }
- }
- else
- {
- pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
- }
-}
-
-static inline UINT8 GetCuntryMaxTxPwr(
- IN PRTMP_ADAPTER pAd,
- IN UINT8 channel)
-{
- int i;
- for (i = 0; i < pAd->ChannelListNum; i++)
- {
- if (pAd->ChannelList[i].Channel == channel)
- break;
- }
-
- if (i == pAd->ChannelListNum)
- return 0xff;
- else
- return pAd->ChannelList[i].MaxTxPwr;
-}
-#endif // __CHLIST_H__
-
+#include "../rt2860/chlist.h"
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
-
- Module Name:
- dfs.h
-
- Abstract:
- Support DFS function.
-
- Revision History:
- Who When What
- -------- ---------- ----------------------------------------------
- Fonchi 03-12-2007 created
-*/
-
-#define RADAR_PULSE 1
-#define RADAR_WIDTH 2
-
-#define WIDTH_RD_IDLE 0
-#define WIDTH_RD_CHECK 1
-
-
-VOID BbpRadarDetectionStart(
- IN PRTMP_ADAPTER pAd);
-
-VOID BbpRadarDetectionStop(
- IN PRTMP_ADAPTER pAd);
-
-VOID RadarDetectionStart(
- IN PRTMP_ADAPTER pAd,
- IN BOOLEAN CTS_Protect,
- IN UINT8 CTSPeriod);
-
-VOID RadarDetectionStop(
- IN PRTMP_ADAPTER pAd);
-
-VOID RadarDetectPeriodic(
- IN PRTMP_ADAPTER pAd);
-
-
-BOOLEAN RadarChannelCheck(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Ch);
-
-ULONG JapRadarType(
- IN PRTMP_ADAPTER pAd);
-
-ULONG RTMPBbpReadRadarDuration(
- IN PRTMP_ADAPTER pAd);
-
-ULONG RTMPReadRadarDuration(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTMPCleanRadarDuration(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTMPPrepareRDCTSFrame(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pDA,
- IN ULONG Duration,
- IN UCHAR RTSRate,
- IN ULONG CTSBaseAddr,
- IN UCHAR FrameGap);
-
-VOID RTMPPrepareRadarDetectParams(
- IN PRTMP_ADAPTER pAd);
-
-
-INT Set_ChMovingTime_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_LongPulseRadarTh_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-
+#include "../rt2860/dfs.h"
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
- */
-
-#ifndef __LINK_LIST_H__
-#define __LINK_LIST_H__
-
-typedef struct _LIST_ENTRY
-{
- struct _LIST_ENTRY *pNext;
-} LIST_ENTRY, *PLIST_ENTRY;
-
-typedef struct _LIST_HEADR
-{
- PLIST_ENTRY pHead;
- PLIST_ENTRY pTail;
- UCHAR size;
-} LIST_HEADER, *PLIST_HEADER;
-
-static inline VOID initList(
- IN PLIST_HEADER pList)
-{
- pList->pHead = pList->pTail = NULL;
- pList->size = 0;
- return;
-}
-
-static inline VOID insertTailList(
- IN PLIST_HEADER pList,
- IN PLIST_ENTRY pEntry)
-{
- pEntry->pNext = NULL;
- if (pList->pTail)
- pList->pTail->pNext = pEntry;
- else
- pList->pHead = pEntry;
- pList->pTail = pEntry;
- pList->size++;
-
- return;
-}
-
-static inline PLIST_ENTRY removeHeadList(
- IN PLIST_HEADER pList)
-{
- PLIST_ENTRY pNext;
- PLIST_ENTRY pEntry;
-
- pEntry = pList->pHead;
- if (pList->pHead != NULL)
- {
- pNext = pList->pHead->pNext;
- pList->pHead = pNext;
- if (pNext == NULL)
- pList->pTail = NULL;
- pList->size--;
- }
- return pEntry;
-}
-
-static inline int getListSize(
- IN PLIST_HEADER pList)
-{
- return pList->size;
-}
-
-static inline PLIST_ENTRY delEntryList(
- IN PLIST_HEADER pList,
- IN PLIST_ENTRY pEntry)
-{
- PLIST_ENTRY pCurEntry;
- PLIST_ENTRY pPrvEntry;
-
- if(pList->pHead == NULL)
- return NULL;
-
- if(pEntry == pList->pHead)
- {
- pCurEntry = pList->pHead;
- pList->pHead = pCurEntry->pNext;
-
- if(pList->pHead == NULL)
- pList->pTail = NULL;
-
- pList->size--;
- return pCurEntry;
- }
-
- pPrvEntry = pList->pHead;
- pCurEntry = pPrvEntry->pNext;
- while(pCurEntry != NULL)
- {
- if (pEntry == pCurEntry)
- {
- pPrvEntry->pNext = pCurEntry->pNext;
-
- if(pEntry == pList->pTail)
- pList->pTail = pPrvEntry;
-
- pList->size--;
- break;
- }
- pPrvEntry = pCurEntry;
- pCurEntry = pPrvEntry->pNext;
- }
-
- return pCurEntry;
-}
-
-#endif // ___LINK_LIST_H__ //
-
+#include "../rt2860/link_list.h"
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
-
- Module Name:
- md5.h
-
- Abstract:
-
- Revision History:
- Who When What
- -------- ---------- ----------------------------------------------
- Name Date Modification logs
- jan 10-28-03 Initial
- Rita 11-23-04 Modify MD5 and SHA-1
-*/
-
-#ifndef uint8
-#define uint8 unsigned char
-#endif
-
-#ifndef uint32
-#define uint32 unsigned long int
-#endif
-
-
-#ifndef __MD5_H__
-#define __MD5_H__
-
-#define MD5_MAC_LEN 16
-
-typedef struct _MD5_CTX {
- UINT32 Buf[4]; // buffers of four states
- UCHAR Input[64]; // input message
- UINT32 LenInBitCount[2]; // length counter for input message, 0 up to 64 bits
-} MD5_CTX;
-
-VOID MD5Init(MD5_CTX *pCtx);
-VOID MD5Update(MD5_CTX *pCtx, UCHAR *pData, UINT32 LenInBytes);
-VOID MD5Final(UCHAR Digest[16], MD5_CTX *pCtx);
-VOID MD5Transform(UINT32 Buf[4], UINT32 Mes[16]);
-
-void md5_mac(u8 *key, size_t key_len, u8 *data, size_t data_len, u8 *mac);
-void hmac_md5(u8 *key, size_t key_len, u8 *data, size_t data_len, u8 *mac);
-
-//
-// SHA context
-//
-typedef struct _SHA_CTX
-{
- UINT32 Buf[5]; // buffers of five states
- UCHAR Input[80]; // input message
- UINT32 LenInBitCount[2]; // length counter for input message, 0 up to 64 bits
-
-} SHA_CTX;
-
-VOID SHAInit(SHA_CTX *pCtx);
-UCHAR SHAUpdate(SHA_CTX *pCtx, UCHAR *pData, UINT32 LenInBytes);
-VOID SHAFinal(SHA_CTX *pCtx, UCHAR Digest[20]);
-VOID SHATransform(UINT32 Buf[5], UINT32 Mes[20]);
-
-#define SHA_DIGEST_LEN 20
-#endif // __MD5_H__
-
-/******************************************************************************/
-#ifndef _AES_H
-#define _AES_H
-
-typedef struct
-{
- uint32 erk[64]; /* encryption round keys */
- uint32 drk[64]; /* decryption round keys */
- int nr; /* number of rounds */
-}
-aes_context;
-
-int rtmp_aes_set_key( aes_context *ctx, uint8 *key, int nbits );
-void rtmp_aes_encrypt( aes_context *ctx, uint8 input[16], uint8 output[16] );
-void rtmp_aes_decrypt( aes_context *ctx, uint8 input[16], uint8 output[16] );
-
-void F(char *password, unsigned char *ssid, int ssidlength, int iterations, int count, unsigned char *output);
-int PasswordHash(char *password, unsigned char *ssid, int ssidlength, unsigned char *output);
-
-#endif /* aes.h */
-
+#include "../rt2860/md5.h"
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
-
- Module Name:
- mlme.h
-
- Abstract:
-
- Revision History:
- Who When What
- -------- ---------- ----------------------------------------------
- John Chang 2003-08-28 Created
- John Chang 2004-09-06 modified for RT2600
-
-*/
-#ifndef __MLME_H__
-#define __MLME_H__
-
-// maximum supported capability information -
-// ESS, IBSS, Privacy, Short Preamble, Spectrum mgmt, Short Slot
-#define SUPPORTED_CAPABILITY_INFO 0x0533
-
-#define END_OF_ARGS -1
-#define LFSR_MASK 0x80000057
-#define MLME_TASK_EXEC_INTV 100/*200*/ //
-#define LEAD_TIME 5
-#define MLME_TASK_EXEC_MULTIPLE 10 /*5*/ // MLME_TASK_EXEC_MULTIPLE * MLME_TASK_EXEC_INTV = 1 sec
-#define REORDER_EXEC_INTV 100 // 0.1 sec
-
-// The definition of Radar detection duration region
-#define CE 0
-#define FCC 1
-#define JAP 2
-#define JAP_W53 3
-#define JAP_W56 4
-#define MAX_RD_REGION 5
-
-#ifdef NDIS51_MINIPORT
-#define BEACON_LOST_TIME 4000 // 2048 msec = 2 sec
-#else
-#define BEACON_LOST_TIME 4 * OS_HZ // 2048 msec = 2 sec
-#endif
-
-#define DLS_TIMEOUT 1200 // unit: msec
-#define AUTH_TIMEOUT 300 // unit: msec
-#define ASSOC_TIMEOUT 300 // unit: msec
-#define JOIN_TIMEOUT 2 * OS_HZ // unit: msec
-#define SHORT_CHANNEL_TIME 90 // unit: msec
-#define MIN_CHANNEL_TIME 110 // unit: msec, for dual band scan
-#define MAX_CHANNEL_TIME 140 // unit: msec, for single band scan
-#define FAST_ACTIVE_SCAN_TIME 30 // Active scan waiting for probe response time
-#define CW_MIN_IN_BITS 4 // actual CwMin = 2^CW_MIN_IN_BITS - 1
-#define CW_MAX_IN_BITS 10 // actual CwMax = 2^CW_MAX_IN_BITS - 1
-
-// Note: RSSI_TO_DBM_OFFSET has been changed to variable for new RF (2004-0720).
-// SHould not refer to this constant anymore
-//#define RSSI_TO_DBM_OFFSET 120 // for RT2530 RSSI-115 = dBm
-#define RSSI_FOR_MID_TX_POWER -55 // -55 db is considered mid-distance
-#define RSSI_FOR_LOW_TX_POWER -45 // -45 db is considered very short distance and
- // eligible to use a lower TX power
-#define RSSI_FOR_LOWEST_TX_POWER -30
-//#define MID_TX_POWER_DELTA 0 // 0 db from full TX power upon mid-distance to AP
-#define LOW_TX_POWER_DELTA 6 // -3 db from full TX power upon very short distance. 1 grade is 0.5 db
-#define LOWEST_TX_POWER_DELTA 16 // -8 db from full TX power upon shortest distance. 1 grade is 0.5 db
-
-#define RSSI_TRIGGERED_UPON_BELOW_THRESHOLD 0
-#define RSSI_TRIGGERED_UPON_EXCCEED_THRESHOLD 1
-#define RSSI_THRESHOLD_FOR_ROAMING 25
-#define RSSI_DELTA 5
-
-// Channel Quality Indication
-#define CQI_IS_GOOD(cqi) ((cqi) >= 50)
-//#define CQI_IS_FAIR(cqi) (((cqi) >= 20) && ((cqi) < 50))
-#define CQI_IS_POOR(cqi) (cqi < 50) //(((cqi) >= 5) && ((cqi) < 20))
-#define CQI_IS_BAD(cqi) (cqi < 5)
-#define CQI_IS_DEAD(cqi) (cqi == 0)
-
-// weighting factor to calculate Channel quality, total should be 100%
-#define RSSI_WEIGHTING 50
-#define TX_WEIGHTING 30
-#define RX_WEIGHTING 20
-
-#define BSS_NOT_FOUND 0xFFFFFFFF
-
-#define MAX_LEN_OF_MLME_QUEUE 40 //10
-
-#define SCAN_PASSIVE 18 // scan with no probe request, only wait beacon and probe response
-#define SCAN_ACTIVE 19 // scan with probe request, and wait beacon and probe response
-#define SCAN_CISCO_PASSIVE 20 // Single channel passive scan
-#define SCAN_CISCO_ACTIVE 21 // Single channel active scan
-#define SCAN_CISCO_NOISE 22 // Single channel passive scan for noise histogram collection
-#define SCAN_CISCO_CHANNEL_LOAD 23 // Single channel passive scan for channel load collection
-#define FAST_SCAN_ACTIVE 24 // scan with probe request, and wait beacon and probe response
-
-#define MAC_ADDR_IS_GROUP(Addr) (((Addr[0]) & 0x01))
-#define MAC_ADDR_HASH(Addr) (Addr[0] ^ Addr[1] ^ Addr[2] ^ Addr[3] ^ Addr[4] ^ Addr[5])
-#define MAC_ADDR_HASH_INDEX(Addr) (MAC_ADDR_HASH(Addr) % HASH_TABLE_SIZE)
-#define TID_MAC_HASH(Addr,TID) (TID^Addr[0] ^ Addr[1] ^ Addr[2] ^ Addr[3] ^ Addr[4] ^ Addr[5])
-#define TID_MAC_HASH_INDEX(Addr,TID) (TID_MAC_HASH(Addr,TID) % HASH_TABLE_SIZE)
-
-// LED Control
-// assoiation ON. one LED ON. another blinking when TX, OFF when idle
-// no association, both LED off
-#define ASIC_LED_ACT_ON(pAd) RTMP_IO_WRITE32(pAd, MAC_CSR14, 0x00031e46)
-#define ASIC_LED_ACT_OFF(pAd) RTMP_IO_WRITE32(pAd, MAC_CSR14, 0x00001e46)
-
-// bit definition of the 2-byte pBEACON->Capability field
-#define CAP_IS_ESS_ON(x) (((x) & 0x0001) != 0)
-#define CAP_IS_IBSS_ON(x) (((x) & 0x0002) != 0)
-#define CAP_IS_CF_POLLABLE_ON(x) (((x) & 0x0004) != 0)
-#define CAP_IS_CF_POLL_REQ_ON(x) (((x) & 0x0008) != 0)
-#define CAP_IS_PRIVACY_ON(x) (((x) & 0x0010) != 0)
-#define CAP_IS_SHORT_PREAMBLE_ON(x) (((x) & 0x0020) != 0)
-#define CAP_IS_PBCC_ON(x) (((x) & 0x0040) != 0)
-#define CAP_IS_AGILITY_ON(x) (((x) & 0x0080) != 0)
-#define CAP_IS_SPECTRUM_MGMT(x) (((x) & 0x0100) != 0) // 802.11e d9
-#define CAP_IS_QOS(x) (((x) & 0x0200) != 0) // 802.11e d9
-#define CAP_IS_SHORT_SLOT(x) (((x) & 0x0400) != 0)
-#define CAP_IS_APSD(x) (((x) & 0x0800) != 0) // 802.11e d9
-#define CAP_IS_IMMED_BA(x) (((x) & 0x1000) != 0) // 802.11e d9
-#define CAP_IS_DSSS_OFDM(x) (((x) & 0x2000) != 0)
-#define CAP_IS_DELAY_BA(x) (((x) & 0x4000) != 0) // 802.11e d9
-
-#define CAP_GENERATE(ess,ibss,priv,s_pre,s_slot,spectrum) (((ess) ? 0x0001 : 0x0000) | ((ibss) ? 0x0002 : 0x0000) | ((priv) ? 0x0010 : 0x0000) | ((s_pre) ? 0x0020 : 0x0000) | ((s_slot) ? 0x0400 : 0x0000) | ((spectrum) ? 0x0100 : 0x0000))
-
-#define ERP_IS_NON_ERP_PRESENT(x) (((x) & 0x01) != 0) // 802.11g
-#define ERP_IS_USE_PROTECTION(x) (((x) & 0x02) != 0) // 802.11g
-#define ERP_IS_USE_BARKER_PREAMBLE(x) (((x) & 0x04) != 0) // 802.11g
-
-#define DRS_TX_QUALITY_WORST_BOUND 8// 3 // just test by gary
-#define DRS_PENALTY 8
-
-#define BA_NOTUSE 2
-//BA Policy subfiled value in ADDBA frame
-#define IMMED_BA 1
-#define DELAY_BA 0
-
-// BA Initiator subfield in DELBA frame
-#define ORIGINATOR 1
-#define RECIPIENT 0
-
-// ADDBA Status Code
-#define ADDBA_RESULTCODE_SUCCESS 0
-#define ADDBA_RESULTCODE_REFUSED 37
-#define ADDBA_RESULTCODE_INVALID_PARAMETERS 38
-
-// DELBA Reason Code
-#define DELBA_REASONCODE_QSTA_LEAVING 36
-#define DELBA_REASONCODE_END_BA 37
-#define DELBA_REASONCODE_UNKNOWN_BA 38
-#define DELBA_REASONCODE_TIMEOUT 39
-
-// reset all OneSecTx counters
-#define RESET_ONE_SEC_TX_CNT(__pEntry) \
-if (((__pEntry)) != NULL) \
-{ \
- (__pEntry)->OneSecTxRetryOkCount = 0; \
- (__pEntry)->OneSecTxFailCount = 0; \
- (__pEntry)->OneSecTxNoRetryOkCount = 0; \
-}
-
-//
-// 802.11 frame formats
-//
-// HT Capability INFO field in HT Cap IE .
-typedef struct PACKED {
- USHORT AdvCoding:1;
- USHORT ChannelWidth:1;
- USHORT MimoPs:2;//momi power safe
- USHORT GF:1; //green field
- USHORT ShortGIfor20:1;
- USHORT ShortGIfor40:1; //for40MHz
- USHORT TxSTBC:1;
- USHORT RxSTBC:2;
- USHORT DelayedBA:1; //rt2860c not support
- USHORT AMsduSize:1; // only support as zero
- USHORT CCKmodein40:1;
- USHORT PSMP:1;
- USHORT Forty_Mhz_Intolerant:1;
- USHORT LSIGTxopProSup:1;
-} HT_CAP_INFO, *PHT_CAP_INFO;
-
-// HT Capability INFO field in HT Cap IE .
-typedef struct PACKED {
- UCHAR MaxRAmpduFactor:2;
- UCHAR MpduDensity:3;
- UCHAR rsv:3;//momi power safe
-} HT_CAP_PARM, *PHT_CAP_PARM;
-
-// HT Capability INFO field in HT Cap IE .
-typedef struct PACKED {
- UCHAR MCSSet[10];
- UCHAR SupRate[2]; // unit : 1Mbps
- UCHAR TxMCSSetDefined:1;
- UCHAR TxRxNotEqual:1;
- UCHAR TxStream:2;
- UCHAR MpduDensity:1;
- UCHAR rsv:3;
- UCHAR rsv3[3];
-} HT_MCS_SET, *PHT_MCS_SET;
-
-// HT Capability INFO field in HT Cap IE .
-typedef struct PACKED {
- USHORT Pco:1;
- USHORT TranTime:2;
- USHORT rsv:5;//momi power safe
- USHORT MCSFeedback:2; //0:no MCS feedback, 2:unsolicited MCS feedback, 3:Full MCS feedback, 1:rsv.
- USHORT PlusHTC:1; //+HTC control field support
- USHORT RDGSupport:1; //reverse Direction Grant support
- USHORT rsv2:4;
-} EXT_HT_CAP_INFO, *PEXT_HT_CAP_INFO;
-
-// HT Beamforming field in HT Cap IE .
-typedef struct PACKED _HT_BF_CAP{
- ULONG TxBFRecCapable:1;
- ULONG RxSoundCapable:1;
- ULONG TxSoundCapable:1;
- ULONG RxNDPCapable:1;
- ULONG TxNDPCapable:1;
- ULONG ImpTxBFCapable:1;
- ULONG Calibration:2;
- ULONG ExpCSICapable:1;
- ULONG ExpNoComSteerCapable:1;
- ULONG ExpComSteerCapable:1;
- ULONG ExpCSIFbk:2;
- ULONG ExpNoComBF:2;
- ULONG ExpComBF:2;
- ULONG MinGrouping:2;
- ULONG CSIBFAntSup:2;
- ULONG NoComSteerBFAntSup:2;
- ULONG ComSteerBFAntSup:2;
- ULONG CSIRowBFSup:2;
- ULONG ChanEstimation:2;
- ULONG rsv:3;
-} HT_BF_CAP, *PHT_BF_CAP;
-
-// HT antenna selection field in HT Cap IE .
-typedef struct PACKED _HT_AS_CAP{
- UCHAR AntSelect:1;
- UCHAR ExpCSIFbkTxASEL:1;
- UCHAR AntIndFbkTxASEL:1;
- UCHAR ExpCSIFbk:1;
- UCHAR AntIndFbk:1;
- UCHAR RxASel:1;
- UCHAR TxSoundPPDU:1;
- UCHAR rsv:1;
-} HT_AS_CAP, *PHT_AS_CAP;
-
-// Draft 1.0 set IE length 26, but is extensible..
-#define SIZE_HT_CAP_IE 26
-// The structure for HT Capability IE.
-typedef struct PACKED _HT_CAPABILITY_IE{
- HT_CAP_INFO HtCapInfo;
- HT_CAP_PARM HtCapParm;
-// HT_MCS_SET HtMCSSet;
- UCHAR MCSSet[16];
- EXT_HT_CAP_INFO ExtHtCapInfo;
- HT_BF_CAP TxBFCap; // beamforming cap. rt2860c not support beamforming.
- HT_AS_CAP ASCap; //antenna selection.
-} HT_CAPABILITY_IE, *PHT_CAPABILITY_IE;
-
-
-// 802.11n draft3 related structure definitions.
-// 7.3.2.60
-#define dot11OBSSScanPassiveDwell 20 // in TU. min amount of time that the STA continously scans each channel when performing an active OBSS scan.
-#define dot11OBSSScanActiveDwell 10 // in TU.min amount of time that the STA continously scans each channel when performing an passive OBSS scan.
-#define dot11BSSWidthTriggerScanInterval 300 // in sec. max interval between scan operations to be performed to detect BSS channel width trigger events.
-#define dot11OBSSScanPassiveTotalPerChannel 200 // in TU. min total amount of time that the STA scans each channel when performing a passive OBSS scan.
-#define dot11OBSSScanActiveTotalPerChannel 20 //in TU. min total amount of time that the STA scans each channel when performing a active OBSS scan
-#define dot11BSSWidthChannelTransactionDelayFactor 5 // min ratio between the delay time in performing a switch from 20MHz BSS to 20/40 BSS operation and the maxima
- // interval between overlapping BSS scan operations.
-#define dot11BSSScanActivityThreshold 25 // in %%, max total time that a STA may be active on the medium during a period of
- // (dot11BSSWidthChannelTransactionDelayFactor * dot11BSSWidthTriggerScanInterval) seconds without
- // being obligated to perform OBSS Scan operations. default is 25(== 0.25%)
-
-typedef struct PACKED _OVERLAP_BSS_SCAN_IE{
- USHORT ScanPassiveDwell;
- USHORT ScanActiveDwell;
- USHORT TriggerScanInt; // Trigger scan interval
- USHORT PassiveTalPerChannel; // passive total per channel
- USHORT ActiveTalPerChannel; // active total per channel
- USHORT DelayFactor; // BSS width channel transition delay factor
- USHORT ScanActThre; // Scan Activity threshold
-}OVERLAP_BSS_SCAN_IE, *POVERLAP_BSS_SCAN_IE;
-
-
-// 7.3.2.56. 20/40 Coexistence element used in Element ID = 72 = IE_2040_BSS_COEXIST
-typedef union PACKED _BSS_2040_COEXIST_IE{
- struct PACKED {
- UCHAR InfoReq:1;
- UCHAR Intolerant40:1; // Inter-BSS. set 1 when prohibits a receiving BSS from operating as a 20/40 Mhz BSS.
- UCHAR BSS20WidthReq:1; // Intra-BSS set 1 when prohibits a receiving AP from operating its BSS as a 20/40MHz BSS.
- UCHAR rsv:5;
- } field;
- UCHAR word;
-} BSS_2040_COEXIST_IE, *PBSS_2040_COEXIST_IE;
-
-
-typedef struct _TRIGGER_EVENTA{
- BOOLEAN bValid;
- UCHAR BSSID[6];
- UCHAR RegClass; // Regulatory Class
- USHORT Channel;
- ULONG CDCounter; // Maintain a seperate count down counter for each Event A.
-} TRIGGER_EVENTA, *PTRIGGER_EVENTA;
-
-// 20/40 trigger event table
-// If one Event A delete or created, or if Event B is detected or not detected, STA should send 2040BSSCoexistence to AP.
-#define MAX_TRIGGER_EVENT 64
-typedef struct _TRIGGER_EVENT_TAB{
- UCHAR EventANo;
- TRIGGER_EVENTA EventA[MAX_TRIGGER_EVENT];
- ULONG EventBCountDown; // Count down counter for Event B.
-} TRIGGER_EVENT_TAB, *PTRIGGER_EVENT_TAB;
-
-// 7.3.27 20/40 Bss Coexistence Mgmt capability used in extended capabilities information IE( ID = 127 = IE_EXT_CAPABILITY).
-// This is the first octet and was defined in 802.11n D3.03 and 802.11yD9.0
-typedef struct PACKED _EXT_CAP_INFO_ELEMENT{
- UCHAR BssCoexistMgmtSupport:1;
- UCHAR rsv:1;
- UCHAR ExtendChannelSwitch:1;
- UCHAR rsv2:5;
-}EXT_CAP_INFO_ELEMENT, *PEXT_CAP_INFO_ELEMENT;
-
-
-// 802.11n 7.3.2.61
-typedef struct PACKED _BSS_2040_COEXIST_ELEMENT{
- UCHAR ElementID; // ID = IE_2040_BSS_COEXIST = 72
- UCHAR Len;
- BSS_2040_COEXIST_IE BssCoexistIe;
-}BSS_2040_COEXIST_ELEMENT, *PBSS_2040_COEXIST_ELEMENT;
-
-
-//802.11n 7.3.2.59
-typedef struct PACKED _BSS_2040_INTOLERANT_CH_REPORT{
- UCHAR ElementID; // ID = IE_2040_BSS_INTOLERANT_REPORT = 73
- UCHAR Len;
- UCHAR RegulatoryClass;
- UCHAR ChList[0];
-}BSS_2040_INTOLERANT_CH_REPORT, *PBSS_2040_INTOLERANT_CH_REPORT;
-
-
-// The structure for channel switch annoucement IE. This is in 802.11n D3.03
-typedef struct PACKED _CHA_SWITCH_ANNOUNCE_IE{
- UCHAR SwitchMode; //channel switch mode
- UCHAR NewChannel; //
- UCHAR SwitchCount; //
-} CHA_SWITCH_ANNOUNCE_IE, *PCHA_SWITCH_ANNOUNCE_IE;
-
-
-// The structure for channel switch annoucement IE. This is in 802.11n D3.03
-typedef struct PACKED _SEC_CHA_OFFSET_IE{
- UCHAR SecondaryChannelOffset; // 1: Secondary above, 3: Secondary below, 0: no Secondary
-} SEC_CHA_OFFSET_IE, *PSEC_CHA_OFFSET_IE;
-
-
-// This structure is extracted from struct RT_HT_CAPABILITY
-typedef struct {
- BOOLEAN bHtEnable; // If we should use ht rate.
- BOOLEAN bPreNHt; // If we should use ht rate.
- //Substract from HT Capability IE
- UCHAR MCSSet[16]; //only supoort MCS=0-15,32 ,
-} RT_HT_PHY_INFO, *PRT_HT_PHY_INFO;
-
-//This structure substracts ralink supports from all 802.11n-related features.
-//Features not listed here but contained in 802.11n spec are not supported in rt2860.
-typedef struct {
- USHORT ChannelWidth:1;
- USHORT MimoPs:2;//mimo power safe MMPS_
- USHORT GF:1; //green field
- USHORT ShortGIfor20:1;
- USHORT ShortGIfor40:1; //for40MHz
- USHORT TxSTBC:1;
- USHORT RxSTBC:2; // 2 bits
- USHORT AmsduEnable:1; // Enable to transmit A-MSDU. Suggest disable. We should use A-MPDU to gain best benifit of 802.11n
- USHORT AmsduSize:1; // Max receiving A-MSDU size
- USHORT rsv:5;
-
- //Substract from Addiont HT INFO IE
- UCHAR MaxRAmpduFactor:2;
- UCHAR MpduDensity:3;
- UCHAR ExtChanOffset:2; // Please not the difference with following UCHAR NewExtChannelOffset; from 802.11n
- UCHAR RecomWidth:1;
-
- USHORT OperaionMode:2;
- USHORT NonGfPresent:1;
- USHORT rsv3:1;
- USHORT OBSS_NonHTExist:1;
- USHORT rsv2:11;
-
- // New Extension Channel Offset IE
- UCHAR NewExtChannelOffset;
- // Extension Capability IE = 127
- UCHAR BSSCoexist2040;
-} RT_HT_CAPABILITY, *PRT_HT_CAPABILITY;
-
-// field in Addtional HT Information IE .
-typedef struct PACKED {
- UCHAR ExtChanOffset:2;
- UCHAR RecomWidth:1;
- UCHAR RifsMode:1;
- UCHAR S_PSMPSup:1; //Indicate support for scheduled PSMP
- UCHAR SerInterGranu:3; //service interval granularity
-} ADD_HTINFO, *PADD_HTINFO;
-
-typedef struct PACKED{
- USHORT OperaionMode:2;
- USHORT NonGfPresent:1;
- USHORT rsv:1;
- USHORT OBSS_NonHTExist:1;
- USHORT rsv2:11;
-} ADD_HTINFO2, *PADD_HTINFO2;
-
-
-// TODO: Need sync with spec about the definition of StbcMcs. In Draft 3.03, it's reserved.
-typedef struct PACKED{
- USHORT StbcMcs:6;
- USHORT DualBeacon:1;
- USHORT DualCTSProtect:1;
- USHORT STBCBeacon:1;
- USHORT LsigTxopProt:1; // L-SIG TXOP protection full support
- USHORT PcoActive:1;
- USHORT PcoPhase:1;
- USHORT rsv:4;
-} ADD_HTINFO3, *PADD_HTINFO3;
-
-#define SIZE_ADD_HT_INFO_IE 22
-typedef struct PACKED{
- UCHAR ControlChan;
- ADD_HTINFO AddHtInfo;
- ADD_HTINFO2 AddHtInfo2;
- ADD_HTINFO3 AddHtInfo3;
- UCHAR MCSSet[16]; // Basic MCS set
-} ADD_HT_INFO_IE, *PADD_HT_INFO_IE;
-
-typedef struct PACKED{
- UCHAR NewExtChanOffset;
-} NEW_EXT_CHAN_IE, *PNEW_EXT_CHAN_IE;
-
-
-// 4-byte HTC field. maybe included in any frame except non-QOS data frame. The Order bit must set 1.
-typedef struct PACKED {
- UINT32 MA:1; //management action payload exist in (QoS Null+HTC)
- UINT32 TRQ:1; //sounding request
- UINT32 MRQ:1; //MCS feedback. Request for a MCS feedback
- UINT32 MRSorASI:3; // MRQ Sequence identifier. unchanged during entire procedure. 0x000-0x110.
- UINT32 MFS:3; //SET to the received value of MRS. 0x111 for unsolicited MFB.
- UINT32 MFBorASC:7; //Link adaptation feedback containing recommended MCS. 0x7f for no feedback or not available
- UINT32 CalPos:2; // calibration position
- UINT32 CalSeq:2; //calibration sequence
- UINT32 FBKReq:2; //feedback request
- UINT32 CSISTEERING:2; //CSI/ STEERING
- UINT32 ZLFAnnouce:1; // ZLF announcement
- UINT32 rsv:5; //calibration sequence
- UINT32 ACConstraint:1; //feedback request
- UINT32 RDG:1; //RDG / More PPDU
-} HT_CONTROL, *PHT_CONTROL;
-
-// 2-byte QOS CONTROL field
-typedef struct PACKED {
- USHORT TID:4;
- USHORT EOSP:1;
- USHORT AckPolicy:2; //0: normal ACK 1:No ACK 2:scheduled under MTBA/PSMP 3: BA
- USHORT AMsduPresent:1;
- USHORT Txop_QueueSize:8;
-} QOS_CONTROL, *PQOS_CONTROL;
-
-// 2-byte Frame control field
-typedef struct PACKED {
- USHORT Ver:2; // Protocol version
- USHORT Type:2; // MSDU type
- USHORT SubType:4; // MSDU subtype
- USHORT ToDs:1; // To DS indication
- USHORT FrDs:1; // From DS indication
- USHORT MoreFrag:1; // More fragment bit
- USHORT Retry:1; // Retry status bit
- USHORT PwrMgmt:1; // Power management bit
- USHORT MoreData:1; // More data bit
- USHORT Wep:1; // Wep data
- USHORT Order:1; // Strict order expected
-} FRAME_CONTROL, *PFRAME_CONTROL;
-
-typedef struct PACKED _HEADER_802_11 {
- FRAME_CONTROL FC;
- USHORT Duration;
- UCHAR Addr1[MAC_ADDR_LEN];
- UCHAR Addr2[MAC_ADDR_LEN];
- UCHAR Addr3[MAC_ADDR_LEN];
- USHORT Frag:4;
- USHORT Sequence:12;
- UCHAR Octet[0];
-} HEADER_802_11, *PHEADER_802_11;
-
-typedef struct PACKED _FRAME_802_11 {
- HEADER_802_11 Hdr;
- UCHAR Octet[1];
-} FRAME_802_11, *PFRAME_802_11;
-
-// QoSNull embedding of management action. When HT Control MA field set to 1.
-typedef struct PACKED _MA_BODY {
- UCHAR Category;
- UCHAR Action;
- UCHAR Octet[1];
-} MA_BODY, *PMA_BODY;
-
-typedef struct PACKED _HEADER_802_3 {
- UCHAR DAAddr1[MAC_ADDR_LEN];
- UCHAR SAAddr2[MAC_ADDR_LEN];
- UCHAR Octet[2];
-} HEADER_802_3, *PHEADER_802_3;
-////Block ACK related format
-// 2-byte BA Parameter field in DELBA frames to terminate an already set up bA
-typedef struct PACKED{
- USHORT Rsv:11; // always set to 0
- USHORT Initiator:1; // 1: originator 0:recipient
- USHORT TID:4; // value of TC os TS
-} DELBA_PARM, *PDELBA_PARM;
-
-// 2-byte BA Parameter Set field in ADDBA frames to signal parm for setting up a BA
-typedef struct PACKED {
- USHORT AMSDUSupported:1; // 0: not permitted 1: permitted
- USHORT BAPolicy:1; // 1: immediately BA 0:delayed BA
- USHORT TID:4; // value of TC os TS
- USHORT BufSize:10; // number of buffe of size 2304 octetsr
-} BA_PARM, *PBA_PARM;
-
-// 2-byte BA Starting Seq CONTROL field
-typedef union PACKED {
- struct PACKED {
- USHORT FragNum:4; // always set to 0
- USHORT StartSeq:12; // sequence number of the 1st MSDU for which this BAR is sent
- } field;
- USHORT word;
-} BASEQ_CONTROL, *PBASEQ_CONTROL;
-
-//BAControl and BARControl are the same
-// 2-byte BA CONTROL field in BA frame
-typedef struct PACKED {
- USHORT ACKPolicy:1; // only related to N-Delayed BA. But not support in RT2860b. 0:NormalACK 1:No ACK
- USHORT MTID:1; //EWC V1.24
- USHORT Compressed:1;
- USHORT Rsv:9;
- USHORT TID:4;
-} BA_CONTROL, *PBA_CONTROL;
-
-// 2-byte BAR CONTROL field in BAR frame
-typedef struct PACKED {
- USHORT ACKPolicy:1; // 0:normal ack, 1:no ack.
- USHORT MTID:1; //if this bit1, use FRAME_MTBA_REQ, if 0, use FRAME_BA_REQ
- USHORT Compressed:1;
- USHORT Rsv1:9;
- USHORT TID:4;
-} BAR_CONTROL, *PBAR_CONTROL;
-
-// BARControl in MTBAR frame
-typedef struct PACKED {
- USHORT ACKPolicy:1;
- USHORT MTID:1;
- USHORT Compressed:1;
- USHORT Rsv1:9;
- USHORT NumTID:4;
-} MTBAR_CONTROL, *PMTBAR_CONTROL;
-
-typedef struct PACKED {
- USHORT Rsv1:12;
- USHORT TID:4;
-} PER_TID_INFO, *PPER_TID_INFO;
-
-typedef struct {
- PER_TID_INFO PerTID;
- BASEQ_CONTROL BAStartingSeq;
-} EACH_TID, *PEACH_TID;
-
-
-typedef struct PACKED _PSPOLL_FRAME {
- FRAME_CONTROL FC;
- USHORT Aid;
- UCHAR Bssid[MAC_ADDR_LEN];
- UCHAR Ta[MAC_ADDR_LEN];
-} PSPOLL_FRAME, *PPSPOLL_FRAME;
-
-typedef struct PACKED _RTS_FRAME {
- FRAME_CONTROL FC;
- USHORT Duration;
- UCHAR Addr1[MAC_ADDR_LEN];
- UCHAR Addr2[MAC_ADDR_LEN];
-}RTS_FRAME, *PRTS_FRAME;
-
-// BAREQ AND MTBAREQ have the same subtype BAR, 802.11n BAR use compressed bitmap.
-typedef struct PACKED _FRAME_BA_REQ {
- FRAME_CONTROL FC;
- USHORT Duration;
- UCHAR Addr1[MAC_ADDR_LEN];
- UCHAR Addr2[MAC_ADDR_LEN];
- BAR_CONTROL BARControl;
- BASEQ_CONTROL BAStartingSeq;
-} FRAME_BA_REQ, *PFRAME_BA_REQ;
-
-typedef struct PACKED _FRAME_MTBA_REQ {
- FRAME_CONTROL FC;
- USHORT Duration;
- UCHAR Addr1[MAC_ADDR_LEN];
- UCHAR Addr2[MAC_ADDR_LEN];
- MTBAR_CONTROL MTBARControl;
- PER_TID_INFO PerTIDInfo;
- BASEQ_CONTROL BAStartingSeq;
-} FRAME_MTBA_REQ, *PFRAME_MTBA_REQ;
-
-// Compressed format is mandantory in HT STA
-typedef struct PACKED _FRAME_MTBA {
- FRAME_CONTROL FC;
- USHORT Duration;
- UCHAR Addr1[MAC_ADDR_LEN];
- UCHAR Addr2[MAC_ADDR_LEN];
- BA_CONTROL BAControl;
- BASEQ_CONTROL BAStartingSeq;
- UCHAR BitMap[8];
-} FRAME_MTBA, *PFRAME_MTBA;
-
-typedef struct PACKED _FRAME_PSMP_ACTION {
- HEADER_802_11 Hdr;
- UCHAR Category;
- UCHAR Action;
- UCHAR Psmp; // 7.3.1.25
-} FRAME_PSMP_ACTION, *PFRAME_PSMP_ACTION;
-
-typedef struct PACKED _FRAME_ACTION_HDR {
- HEADER_802_11 Hdr;
- UCHAR Category;
- UCHAR Action;
-} FRAME_ACTION_HDR, *PFRAME_ACTION_HDR;
-
-//Action Frame
-//Action Frame Category:Spectrum, Action:Channel Switch. 7.3.2.20
-typedef struct PACKED _CHAN_SWITCH_ANNOUNCE {
- UCHAR ElementID; // ID = IE_CHANNEL_SWITCH_ANNOUNCEMENT = 37
- UCHAR Len;
- CHA_SWITCH_ANNOUNCE_IE CSAnnounceIe;
-} CHAN_SWITCH_ANNOUNCE, *PCHAN_SWITCH_ANNOUNCE;
-
-
-//802.11n : 7.3.2.20a
-typedef struct PACKED _SECOND_CHAN_OFFSET {
- UCHAR ElementID; // ID = IE_SECONDARY_CH_OFFSET = 62
- UCHAR Len;
- SEC_CHA_OFFSET_IE SecChOffsetIe;
-} SECOND_CHAN_OFFSET, *PSECOND_CHAN_OFFSET;
-
-
-typedef struct PACKED _FRAME_SPETRUM_CS {
- HEADER_802_11 Hdr;
- UCHAR Category;
- UCHAR Action;
- CHAN_SWITCH_ANNOUNCE CSAnnounce;
- SECOND_CHAN_OFFSET SecondChannel;
-} FRAME_SPETRUM_CS, *PFRAME_SPETRUM_CS;
-
-
-typedef struct PACKED _FRAME_ADDBA_REQ {
- HEADER_802_11 Hdr;
- UCHAR Category;
- UCHAR Action;
- UCHAR Token; // 1
- BA_PARM BaParm; // 2 - 10
- USHORT TimeOutValue; // 0 - 0
- BASEQ_CONTROL BaStartSeq; // 0-0
-} FRAME_ADDBA_REQ, *PFRAME_ADDBA_REQ;
-
-typedef struct PACKED _FRAME_ADDBA_RSP {
- HEADER_802_11 Hdr;
- UCHAR Category;
- UCHAR Action;
- UCHAR Token;
- USHORT StatusCode;
- BA_PARM BaParm; //0 - 2
- USHORT TimeOutValue;
-} FRAME_ADDBA_RSP, *PFRAME_ADDBA_RSP;
-
-typedef struct PACKED _FRAME_DELBA_REQ {
- HEADER_802_11 Hdr;
- UCHAR Category;
- UCHAR Action;
- DELBA_PARM DelbaParm;
- USHORT ReasonCode;
-} FRAME_DELBA_REQ, *PFRAME_DELBA_REQ;
-
-
-//7.2.1.7
-typedef struct PACKED _FRAME_BAR {
- FRAME_CONTROL FC;
- USHORT Duration;
- UCHAR Addr1[MAC_ADDR_LEN];
- UCHAR Addr2[MAC_ADDR_LEN];
- BAR_CONTROL BarControl;
- BASEQ_CONTROL StartingSeq;
-} FRAME_BAR, *PFRAME_BAR;
-
-//7.2.1.7
-typedef struct PACKED _FRAME_BA {
- FRAME_CONTROL FC;
- USHORT Duration;
- UCHAR Addr1[MAC_ADDR_LEN];
- UCHAR Addr2[MAC_ADDR_LEN];
- BAR_CONTROL BarControl;
- BASEQ_CONTROL StartingSeq;
- UCHAR bitmask[8];
-} FRAME_BA, *PFRAME_BA;
-
-
-// Radio Measuement Request Frame Format
-typedef struct PACKED _FRAME_RM_REQ_ACTION {
- HEADER_802_11 Hdr;
- UCHAR Category;
- UCHAR Action;
- UCHAR Token;
- USHORT Repetition;
- UCHAR data[0];
-} FRAME_RM_REQ_ACTION, *PFRAME_RM_REQ_ACTION;
-
-typedef struct PACKED {
- UCHAR ID;
- UCHAR Length;
- UCHAR ChannelSwitchMode;
- UCHAR NewRegClass;
- UCHAR NewChannelNum;
- UCHAR ChannelSwitchCount;
-} HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE, *PHT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE;
-
-
-//
-// _Limit must be the 2**n - 1
-// _SEQ1 , _SEQ2 must be within 0 ~ _Limit
-//
-#define SEQ_STEPONE(_SEQ1, _SEQ2, _Limit) ((_SEQ1 == ((_SEQ2+1) & _Limit)))
-#define SEQ_SMALLER(_SEQ1, _SEQ2, _Limit) (((_SEQ1-_SEQ2) & ((_Limit+1)>>1)))
-#define SEQ_LARGER(_SEQ1, _SEQ2, _Limit) ((_SEQ1 != _SEQ2) && !(((_SEQ1-_SEQ2) & ((_Limit+1)>>1))))
-#define SEQ_WITHIN_WIN(_SEQ1, _SEQ2, _WIN, _Limit) (SEQ_LARGER(_SEQ1, _SEQ2, _Limit) && \
- SEQ_SMALLER(_SEQ1, ((_SEQ2+_WIN+1)&_Limit), _Limit))
-
-//
-// Contention-free parameter (without ID and Length)
-//
-typedef struct PACKED {
- BOOLEAN bValid; // 1: variable contains valid value
- UCHAR CfpCount;
- UCHAR CfpPeriod;
- USHORT CfpMaxDuration;
- USHORT CfpDurRemaining;
-} CF_PARM, *PCF_PARM;
-
-typedef struct _CIPHER_SUITE {
- NDIS_802_11_ENCRYPTION_STATUS PairCipher; // Unicast cipher 1, this one has more secured cipher suite
- NDIS_802_11_ENCRYPTION_STATUS PairCipherAux; // Unicast cipher 2 if AP announce two unicast cipher suite
- NDIS_802_11_ENCRYPTION_STATUS GroupCipher; // Group cipher
- USHORT RsnCapability; // RSN capability from beacon
- BOOLEAN bMixMode; // Indicate Pair & Group cipher might be different
-} CIPHER_SUITE, *PCIPHER_SUITE;
-
-// EDCA configuration from AP's BEACON/ProbeRsp
-typedef struct {
- BOOLEAN bValid; // 1: variable contains valid value
- BOOLEAN bAdd; // 1: variable contains valid value
- BOOLEAN bQAck;
- BOOLEAN bQueueRequest;
- BOOLEAN bTxopRequest;
- BOOLEAN bAPSDCapable;
-// BOOLEAN bMoreDataAck;
- UCHAR EdcaUpdateCount;
- UCHAR Aifsn[4]; // 0:AC_BK, 1:AC_BE, 2:AC_VI, 3:AC_VO
- UCHAR Cwmin[4];
- UCHAR Cwmax[4];
- USHORT Txop[4]; // in unit of 32-us
- BOOLEAN bACM[4]; // 1: Admission Control of AC_BK is mandattory
-} EDCA_PARM, *PEDCA_PARM;
-
-// QBSS LOAD information from QAP's BEACON/ProbeRsp
-typedef struct {
- BOOLEAN bValid; // 1: variable contains valid value
- USHORT StaNum;
- UCHAR ChannelUtilization;
- USHORT RemainingAdmissionControl; // in unit of 32-us
-} QBSS_LOAD_PARM, *PQBSS_LOAD_PARM;
-
-// QBSS Info field in QSTA's assoc req
-typedef struct PACKED {
- UCHAR UAPSD_AC_VO:1;
- UCHAR UAPSD_AC_VI:1;
- UCHAR UAPSD_AC_BK:1;
- UCHAR UAPSD_AC_BE:1;
- UCHAR Rsv1:1;
- UCHAR MaxSPLength:2;
- UCHAR Rsv2:1;
-} QBSS_STA_INFO_PARM, *PQBSS_STA_INFO_PARM;
-
-// QBSS Info field in QAP's Beacon/ProbeRsp
-typedef struct PACKED {
- UCHAR ParamSetCount:4;
- UCHAR Rsv:3;
- UCHAR UAPSD:1;
-} QBSS_AP_INFO_PARM, *PQBSS_AP_INFO_PARM;
-
-// QOS Capability reported in QAP's BEACON/ProbeRsp
-// QOS Capability sent out in QSTA's AssociateReq/ReAssociateReq
-typedef struct {
- BOOLEAN bValid; // 1: variable contains valid value
- BOOLEAN bQAck;
- BOOLEAN bQueueRequest;
- BOOLEAN bTxopRequest;
-// BOOLEAN bMoreDataAck;
- UCHAR EdcaUpdateCount;
-} QOS_CAPABILITY_PARM, *PQOS_CAPABILITY_PARM;
-
-typedef struct {
- UCHAR IELen;
- UCHAR IE[MAX_CUSTOM_LEN];
-} WPA_IE_;
-
-typedef struct {
- UCHAR Bssid[MAC_ADDR_LEN];
- UCHAR Channel;
- UCHAR CentralChannel; //Store the wide-band central channel for 40MHz. .used in 40MHz AP. Or this is the same as Channel.
- UCHAR BssType;
- USHORT AtimWin;
- USHORT BeaconPeriod;
-
- UCHAR SupRate[MAX_LEN_OF_SUPPORTED_RATES];
- UCHAR SupRateLen;
- UCHAR ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
- UCHAR ExtRateLen;
- HT_CAPABILITY_IE HtCapability;
- UCHAR HtCapabilityLen;
- ADD_HT_INFO_IE AddHtInfo; // AP might use this additional ht info IE
- UCHAR AddHtInfoLen;
- UCHAR NewExtChanOffset;
- CHAR Rssi;
- UCHAR Privacy; // Indicate security function ON/OFF. Don't mess up with auth mode.
- UCHAR Hidden;
-
- USHORT DtimPeriod;
- USHORT CapabilityInfo;
-
- USHORT CfpCount;
- USHORT CfpPeriod;
- USHORT CfpMaxDuration;
- USHORT CfpDurRemaining;
- UCHAR SsidLen;
- CHAR Ssid[MAX_LEN_OF_SSID];
-
- ULONG LastBeaconRxTime; // OS's timestamp
-
- BOOLEAN bSES;
-
- // New for WPA2
- CIPHER_SUITE WPA; // AP announced WPA cipher suite
- CIPHER_SUITE WPA2; // AP announced WPA2 cipher suite
-
- // New for microsoft WPA support
- NDIS_802_11_FIXED_IEs FixIEs;
- NDIS_802_11_AUTHENTICATION_MODE AuthModeAux; // Addition mode for WPA2 / WPA capable AP
- NDIS_802_11_AUTHENTICATION_MODE AuthMode;
- NDIS_802_11_WEP_STATUS WepStatus; // Unicast Encryption Algorithm extract from VAR_IE
- USHORT VarIELen; // Length of next VIE include EID & Length
- UCHAR VarIEs[MAX_VIE_LEN];
-
- // CCX Ckip information
- UCHAR CkipFlag;
-
- // CCX 2 TSF
- UCHAR PTSF[4]; // Parent TSF
- UCHAR TTSF[8]; // Target TSF
-
- // 802.11e d9, and WMM
- EDCA_PARM EdcaParm;
- QOS_CAPABILITY_PARM QosCapability;
- QBSS_LOAD_PARM QbssLoad;
- WPA_IE_ WpaIE;
- WPA_IE_ RsnIE;
-} BSS_ENTRY, *PBSS_ENTRY;
-
-typedef struct {
- UCHAR BssNr;
- UCHAR BssOverlapNr;
- BSS_ENTRY BssEntry[MAX_LEN_OF_BSS_TABLE];
-} BSS_TABLE, *PBSS_TABLE;
-
-
-typedef struct _MLME_QUEUE_ELEM {
- ULONG Machine;
- ULONG MsgType;
- ULONG MsgLen;
- UCHAR Msg[MGMT_DMA_BUFFER_SIZE];
- LARGE_INTEGER TimeStamp;
- UCHAR Rssi0;
- UCHAR Rssi1;
- UCHAR Rssi2;
- UCHAR Signal;
- UCHAR Channel;
- UCHAR Wcid;
- BOOLEAN Occupied;
-} MLME_QUEUE_ELEM, *PMLME_QUEUE_ELEM;
-
-typedef struct _MLME_QUEUE {
- ULONG Num;
- ULONG Head;
- ULONG Tail;
- NDIS_SPIN_LOCK Lock;
- MLME_QUEUE_ELEM Entry[MAX_LEN_OF_MLME_QUEUE];
-} MLME_QUEUE, *PMLME_QUEUE;
-
-typedef VOID (*STATE_MACHINE_FUNC)(VOID *Adaptor, MLME_QUEUE_ELEM *Elem);
-
-typedef struct _STATE_MACHINE {
- ULONG Base;
- ULONG NrState;
- ULONG NrMsg;
- ULONG CurrState;
- STATE_MACHINE_FUNC *TransFunc;
-} STATE_MACHINE, *PSTATE_MACHINE;
-
-
-// MLME AUX data structure that hold temporarliy settings during a connection attempt.
-// Once this attemp succeeds, all settings will be copy to pAd->StaActive.
-// A connection attempt (user set OID, roaming, CCX fast roaming,..) consists of
-// several steps (JOIN, AUTH, ASSOC or REASSOC) and may fail at any step. We purposely
-// separate this under-trial settings away from pAd->StaActive so that once
-// this new attempt failed, driver can auto-recover back to the active settings.
-typedef struct _MLME_AUX {
- UCHAR BssType;
- UCHAR Ssid[MAX_LEN_OF_SSID];
- UCHAR SsidLen;
- UCHAR Bssid[MAC_ADDR_LEN];
- UCHAR AutoReconnectSsid[MAX_LEN_OF_SSID];
- UCHAR AutoReconnectSsidLen;
- USHORT Alg;
- UCHAR ScanType;
- UCHAR Channel;
- UCHAR CentralChannel;
- USHORT Aid;
- USHORT CapabilityInfo;
- USHORT BeaconPeriod;
- USHORT CfpMaxDuration;
- USHORT CfpPeriod;
- USHORT AtimWin;
-
- // Copy supported rate from desired AP's beacon. We are trying to match
- // AP's supported and extended rate settings.
- UCHAR SupRate[MAX_LEN_OF_SUPPORTED_RATES];
- UCHAR ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
- UCHAR SupRateLen;
- UCHAR ExtRateLen;
- HT_CAPABILITY_IE HtCapability;
- UCHAR HtCapabilityLen;
- ADD_HT_INFO_IE AddHtInfo; // AP might use this additional ht info IE
- UCHAR NewExtChannelOffset;
- //RT_HT_CAPABILITY SupportedHtPhy;
-
- // new for QOS
- QOS_CAPABILITY_PARM APQosCapability; // QOS capability of the current associated AP
- EDCA_PARM APEdcaParm; // EDCA parameters of the current associated AP
- QBSS_LOAD_PARM APQbssLoad; // QBSS load of the current associated AP
-
- // new to keep Ralink specific feature
- ULONG APRalinkIe;
-
- BSS_TABLE SsidBssTab; // AP list for the same SSID
- BSS_TABLE RoamTab; // AP list eligible for roaming
- ULONG BssIdx;
- ULONG RoamIdx;
-
- BOOLEAN CurrReqIsFromNdis;
-
- RALINK_TIMER_STRUCT BeaconTimer, ScanTimer;
- RALINK_TIMER_STRUCT AuthTimer;
- RALINK_TIMER_STRUCT AssocTimer, ReassocTimer, DisassocTimer;
-} MLME_AUX, *PMLME_AUX;
-
-typedef struct _MLME_ADDBA_REQ_STRUCT{
- UCHAR Wcid; //
- UCHAR pAddr[MAC_ADDR_LEN];
- UCHAR BaBufSize;
- USHORT TimeOutValue;
- UCHAR TID;
- UCHAR Token;
- USHORT BaStartSeq;
-} MLME_ADDBA_REQ_STRUCT, *PMLME_ADDBA_REQ_STRUCT;
-
-
-typedef struct _MLME_DELBA_REQ_STRUCT{
- UCHAR Wcid; //
- UCHAR Addr[MAC_ADDR_LEN];
- UCHAR TID;
- UCHAR Initiator;
-} MLME_DELBA_REQ_STRUCT, *PMLME_DELBA_REQ_STRUCT;
-
-// assoc struct is equal to reassoc
-typedef struct _MLME_ASSOC_REQ_STRUCT{
- UCHAR Addr[MAC_ADDR_LEN];
- USHORT CapabilityInfo;
- USHORT ListenIntv;
- ULONG Timeout;
-} MLME_ASSOC_REQ_STRUCT, *PMLME_ASSOC_REQ_STRUCT, MLME_REASSOC_REQ_STRUCT, *PMLME_REASSOC_REQ_STRUCT;
-
-typedef struct _MLME_DISASSOC_REQ_STRUCT{
- UCHAR Addr[MAC_ADDR_LEN];
- USHORT Reason;
-} MLME_DISASSOC_REQ_STRUCT, *PMLME_DISASSOC_REQ_STRUCT;
-
-typedef struct _MLME_AUTH_REQ_STRUCT {
- UCHAR Addr[MAC_ADDR_LEN];
- USHORT Alg;
- ULONG Timeout;
-} MLME_AUTH_REQ_STRUCT, *PMLME_AUTH_REQ_STRUCT;
-
-typedef struct _MLME_DEAUTH_REQ_STRUCT {
- UCHAR Addr[MAC_ADDR_LEN];
- USHORT Reason;
-} MLME_DEAUTH_REQ_STRUCT, *PMLME_DEAUTH_REQ_STRUCT;
-
-typedef struct {
- ULONG BssIdx;
-} MLME_JOIN_REQ_STRUCT;
-
-typedef struct _MLME_SCAN_REQ_STRUCT {
- UCHAR Bssid[MAC_ADDR_LEN];
- UCHAR BssType;
- UCHAR ScanType;
- UCHAR SsidLen;
- CHAR Ssid[MAX_LEN_OF_SSID];
-} MLME_SCAN_REQ_STRUCT, *PMLME_SCAN_REQ_STRUCT;
-
-typedef struct _MLME_START_REQ_STRUCT {
- CHAR Ssid[MAX_LEN_OF_SSID];
- UCHAR SsidLen;
-} MLME_START_REQ_STRUCT, *PMLME_START_REQ_STRUCT;
-
-typedef struct PACKED {
- UCHAR Eid;
- UCHAR Len;
- CHAR Octet[1];
-} EID_STRUCT,*PEID_STRUCT, BEACON_EID_STRUCT, *PBEACON_EID_STRUCT;
-
-typedef struct PACKED _RTMP_TX_RATE_SWITCH
-{
- UCHAR ItemNo;
- UCHAR STBC:1;
- UCHAR ShortGI:1;
- UCHAR BW:1;
- UCHAR Rsv1:1;
- UCHAR Mode:2;
- UCHAR Rsv2:2;
- UCHAR CurrMCS;
- UCHAR TrainUp;
- UCHAR TrainDown;
-} RRTMP_TX_RATE_SWITCH, *PRTMP_TX_RATE_SWITCH;
-
-// ========================== AP mlme.h ===============================
-#define TBTT_PRELOAD_TIME 384 // usec. LomgPreamble + 24-byte at 1Mbps
-#define DEFAULT_DTIM_PERIOD 1
-
-#define MAC_TABLE_AGEOUT_TIME 300 // unit: sec
-#define MAC_TABLE_ASSOC_TIMEOUT 5 // unit: sec
-#define MAC_TABLE_FULL(Tab) ((Tab).size == MAX_LEN_OF_MAC_TABLE)
-
-// AP shall drop the sta if contine Tx fail count reach it.
-#define MAC_ENTRY_LIFE_CHECK_CNT 20 // packet cnt.
-
-// Value domain of pMacEntry->Sst
-typedef enum _Sst {
- SST_NOT_AUTH, // 0: equivalent to IEEE 802.11/1999 state 1
- SST_AUTH, // 1: equivalent to IEEE 802.11/1999 state 2
- SST_ASSOC // 2: equivalent to IEEE 802.11/1999 state 3
-} SST;
-
-// value domain of pMacEntry->AuthState
-typedef enum _AuthState {
- AS_NOT_AUTH,
- AS_AUTH_OPEN, // STA has been authenticated using OPEN SYSTEM
- AS_AUTH_KEY, // STA has been authenticated using SHARED KEY
- AS_AUTHENTICATING // STA is waiting for AUTH seq#3 using SHARED KEY
-} AUTH_STATE;
-
-//for-wpa value domain of pMacEntry->WpaState 802.1i D3 p.114
-typedef enum _ApWpaState {
- AS_NOTUSE, // 0
- AS_DISCONNECT, // 1
- AS_DISCONNECTED, // 2
- AS_INITIALIZE, // 3
- AS_AUTHENTICATION, // 4
- AS_AUTHENTICATION2, // 5
- AS_INITPMK, // 6
- AS_INITPSK, // 7
- AS_PTKSTART, // 8
- AS_PTKINIT_NEGOTIATING, // 9
- AS_PTKINITDONE, // 10
- AS_UPDATEKEYS, // 11
- AS_INTEGRITY_FAILURE, // 12
- AS_KEYUPDATE, // 13
-} AP_WPA_STATE;
-
-// for-wpa value domain of pMacEntry->WpaState 802.1i D3 p.114
-typedef enum _GTKState {
- REKEY_NEGOTIATING,
- REKEY_ESTABLISHED,
- KEYERROR,
-} GTK_STATE;
-
-// for-wpa value domain of pMacEntry->WpaState 802.1i D3 p.114
-typedef enum _WpaGTKState {
- SETKEYS,
- SETKEYS_DONE,
-} WPA_GTK_STATE;
-// ====================== end of AP mlme.h ============================
-
-
-#endif // MLME_H__
+#include "../rt2860/mlme.h"
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
-
- Module Name:
- oid.h
-
- Abstract:
-
- Revision History:
- Who When What
- -------- ---------- ----------------------------------------------
- Name Date Modification logs
-*/
-#ifndef _OID_H_
-#define _OID_H_
-
-#define TRUE 1
-#define FALSE 0
-//
-// IEEE 802.11 Structures and definitions
-//
-#define MAX_TX_POWER_LEVEL 100 /* mW */
-#define MAX_RSSI_TRIGGER -10 /* dBm */
-#define MIN_RSSI_TRIGGER -200 /* dBm */
-#define MAX_FRAG_THRESHOLD 2346 /* byte count */
-#define MIN_FRAG_THRESHOLD 256 /* byte count */
-#define MAX_RTS_THRESHOLD 2347 /* byte count */
-
-// new types for Media Specific Indications
-// Extension channel offset
-#define EXTCHA_NONE 0
-#define EXTCHA_ABOVE 0x1
-#define EXTCHA_BELOW 0x3
-
-// BW
-#define BAND_WIDTH_20 0
-#define BAND_WIDTH_40 1
-#define BAND_WIDTH_BOTH 2
-#define BAND_WIDTH_10 3 // 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field.
-// SHORTGI
-#define GAP_INTERVAL_400 1 // only support in HT mode
-#define GAP_INTERVAL_800 0
-#define GAP_INTERVAL_BOTH 2
-
-#define NdisMediaStateConnected 1
-#define NdisMediaStateDisconnected 0
-
-#define NDIS_802_11_LENGTH_SSID 32
-#define NDIS_802_11_LENGTH_RATES 8
-#define NDIS_802_11_LENGTH_RATES_EX 16
-#define MAC_ADDR_LENGTH 6
-#define MAX_NUM_OF_CHS 49 // 14 channels @2.4G + 12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL terminationc
-#define MAX_NUMBER_OF_EVENT 10 // entry # in EVENT table
-#define MAX_NUMBER_OF_MAC 32 // if MAX_MBSSID_NUM is 8, this value can't be larger than 211
-#define MAX_NUMBER_OF_ACL 64
-#define MAX_LENGTH_OF_SUPPORT_RATES 12 // 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
-#define MAX_NUMBER_OF_DLS_ENTRY 4
-
-#define OID_GEN_MACHINE_NAME 0x0001021A
-
-#define RT_QUERY_SIGNAL_CONTEXT 0x0402
-#define RT_SET_IAPP_PID 0x0404
-#define RT_SET_APD_PID 0x0405
-#define RT_SET_DEL_MAC_ENTRY 0x0406
-
-//
-// IEEE 802.11 OIDs
-//
-#define OID_GET_SET_TOGGLE 0x8000
-
-#define OID_802_11_NETWORK_TYPES_SUPPORTED 0x0103
-#define OID_802_11_NETWORK_TYPE_IN_USE 0x0104
-#define OID_802_11_RSSI_TRIGGER 0x0107
-#define RT_OID_802_11_RSSI 0x0108 //rt2860 only , kathy
-#define RT_OID_802_11_RSSI_1 0x0109 //rt2860 only , kathy
-#define RT_OID_802_11_RSSI_2 0x010A //rt2860 only , kathy
-#define OID_802_11_NUMBER_OF_ANTENNAS 0x010B
-#define OID_802_11_RX_ANTENNA_SELECTED 0x010C
-#define OID_802_11_TX_ANTENNA_SELECTED 0x010D
-#define OID_802_11_SUPPORTED_RATES 0x010E
-#define OID_802_11_ADD_WEP 0x0112
-#define OID_802_11_REMOVE_WEP 0x0113
-#define OID_802_11_DISASSOCIATE 0x0114
-#define OID_802_11_PRIVACY_FILTER 0x0118
-#define OID_802_11_ASSOCIATION_INFORMATION 0x011E
-#define OID_802_11_TEST 0x011F
-#define RT_OID_802_11_COUNTRY_REGION 0x0507
-#define OID_802_11_BSSID_LIST_SCAN 0x0508
-#define OID_802_11_SSID 0x0509
-#define OID_802_11_BSSID 0x050A
-#define RT_OID_802_11_RADIO 0x050B
-#define RT_OID_802_11_PHY_MODE 0x050C
-#define RT_OID_802_11_STA_CONFIG 0x050D
-#define OID_802_11_DESIRED_RATES 0x050E
-#define RT_OID_802_11_PREAMBLE 0x050F
-#define OID_802_11_WEP_STATUS 0x0510
-#define OID_802_11_AUTHENTICATION_MODE 0x0511
-#define OID_802_11_INFRASTRUCTURE_MODE 0x0512
-#define RT_OID_802_11_RESET_COUNTERS 0x0513
-#define OID_802_11_RTS_THRESHOLD 0x0514
-#define OID_802_11_FRAGMENTATION_THRESHOLD 0x0515
-#define OID_802_11_POWER_MODE 0x0516
-#define OID_802_11_TX_POWER_LEVEL 0x0517
-#define RT_OID_802_11_ADD_WPA 0x0518
-#define OID_802_11_REMOVE_KEY 0x0519
-#define OID_802_11_ADD_KEY 0x0520
-#define OID_802_11_CONFIGURATION 0x0521
-#define OID_802_11_TX_PACKET_BURST 0x0522
-#define RT_OID_802_11_QUERY_NOISE_LEVEL 0x0523
-#define RT_OID_802_11_EXTRA_INFO 0x0524
-#ifdef DBG
-#define RT_OID_802_11_HARDWARE_REGISTER 0x0525
-#endif
-#define OID_802_11_ENCRYPTION_STATUS OID_802_11_WEP_STATUS
-#define OID_802_11_DEAUTHENTICATION 0x0526
-#define OID_802_11_DROP_UNENCRYPTED 0x0527
-#define OID_802_11_MIC_FAILURE_REPORT_FRAME 0x0528
-
-// For 802.1x daemin using to require current driver configuration
-#define OID_802_11_RADIUS_QUERY_SETTING 0x0540
-
-#define RT_OID_DEVICE_NAME 0x0607
-#define RT_OID_VERSION_INFO 0x0608
-#define OID_802_11_BSSID_LIST 0x0609
-#define OID_802_3_CURRENT_ADDRESS 0x060A
-#define OID_GEN_MEDIA_CONNECT_STATUS 0x060B
-#define RT_OID_802_11_QUERY_LINK_STATUS 0x060C
-#define OID_802_11_RSSI 0x060D
-#define OID_802_11_STATISTICS 0x060E
-#define OID_GEN_RCV_OK 0x060F
-#define OID_GEN_RCV_NO_BUFFER 0x0610
-#define RT_OID_802_11_QUERY_EEPROM_VERSION 0x0611
-#define RT_OID_802_11_QUERY_FIRMWARE_VERSION 0x0612
-#define RT_OID_802_11_QUERY_LAST_RX_RATE 0x0613
-#define RT_OID_802_11_TX_POWER_LEVEL_1 0x0614
-#define RT_OID_802_11_QUERY_PIDVID 0x0615
-
-#define OID_SET_COUNTERMEASURES 0x0616
-#define OID_802_11_SET_IEEE8021X 0x0617
-#define OID_802_11_SET_IEEE8021X_REQUIRE_KEY 0x0618
-#define OID_802_11_PMKID 0x0620
-#define RT_OID_WPA_SUPPLICANT_SUPPORT 0x0621
-#define RT_OID_WE_VERSION_COMPILED 0x0622
-#define RT_OID_NEW_DRIVER 0x0623
-
-
-//rt2860 , kathy
-#define RT_OID_802_11_SNR_0 0x0630
-#define RT_OID_802_11_SNR_1 0x0631
-#define RT_OID_802_11_QUERY_LAST_TX_RATE 0x0632
-#define RT_OID_802_11_QUERY_HT_PHYMODE 0x0633
-#define RT_OID_802_11_SET_HT_PHYMODE 0x0634
-#define OID_802_11_RELOAD_DEFAULTS 0x0635
-#define RT_OID_802_11_QUERY_APSD_SETTING 0x0636
-#define RT_OID_802_11_SET_APSD_SETTING 0x0637
-#define RT_OID_802_11_QUERY_APSD_PSM 0x0638
-#define RT_OID_802_11_SET_APSD_PSM 0x0639
-#define RT_OID_802_11_QUERY_DLS 0x063A
-#define RT_OID_802_11_SET_DLS 0x063B
-#define RT_OID_802_11_QUERY_DLS_PARAM 0x063C
-#define RT_OID_802_11_SET_DLS_PARAM 0x063D
-#define RT_OID_802_11_QUERY_WMM 0x063E
-#define RT_OID_802_11_SET_WMM 0x063F
-#define RT_OID_802_11_QUERY_IMME_BA_CAP 0x0640
-#define RT_OID_802_11_SET_IMME_BA_CAP 0x0641
-#define RT_OID_802_11_QUERY_BATABLE 0x0642
-#define RT_OID_802_11_ADD_IMME_BA 0x0643
-#define RT_OID_802_11_TEAR_IMME_BA 0x0644
-#define RT_OID_DRIVER_DEVICE_NAME 0x0645
-#define RT_OID_802_11_QUERY_DAT_HT_PHYMODE 0x0646
-#define RT_OID_QUERY_MULTIPLE_CARD_SUPPORT 0x0647
-
-// Ralink defined OIDs
-// Dennis Lee move to platform specific
-
-#define RT_OID_802_11_BSSID (OID_GET_SET_TOGGLE | OID_802_11_BSSID)
-#define RT_OID_802_11_SSID (OID_GET_SET_TOGGLE | OID_802_11_SSID)
-#define RT_OID_802_11_INFRASTRUCTURE_MODE (OID_GET_SET_TOGGLE | OID_802_11_INFRASTRUCTURE_MODE)
-#define RT_OID_802_11_ADD_WEP (OID_GET_SET_TOGGLE | OID_802_11_ADD_WEP)
-#define RT_OID_802_11_ADD_KEY (OID_GET_SET_TOGGLE | OID_802_11_ADD_KEY)
-#define RT_OID_802_11_REMOVE_WEP (OID_GET_SET_TOGGLE | OID_802_11_REMOVE_WEP)
-#define RT_OID_802_11_REMOVE_KEY (OID_GET_SET_TOGGLE | OID_802_11_REMOVE_KEY)
-#define RT_OID_802_11_DISASSOCIATE (OID_GET_SET_TOGGLE | OID_802_11_DISASSOCIATE)
-#define RT_OID_802_11_AUTHENTICATION_MODE (OID_GET_SET_TOGGLE | OID_802_11_AUTHENTICATION_MODE)
-#define RT_OID_802_11_PRIVACY_FILTER (OID_GET_SET_TOGGLE | OID_802_11_PRIVACY_FILTER)
-#define RT_OID_802_11_BSSID_LIST_SCAN (OID_GET_SET_TOGGLE | OID_802_11_BSSID_LIST_SCAN)
-#define RT_OID_802_11_WEP_STATUS (OID_GET_SET_TOGGLE | OID_802_11_WEP_STATUS)
-#define RT_OID_802_11_RELOAD_DEFAULTS (OID_GET_SET_TOGGLE | OID_802_11_RELOAD_DEFAULTS)
-#define RT_OID_802_11_NETWORK_TYPE_IN_USE (OID_GET_SET_TOGGLE | OID_802_11_NETWORK_TYPE_IN_USE)
-#define RT_OID_802_11_TX_POWER_LEVEL (OID_GET_SET_TOGGLE | OID_802_11_TX_POWER_LEVEL)
-#define RT_OID_802_11_RSSI_TRIGGER (OID_GET_SET_TOGGLE | OID_802_11_RSSI_TRIGGER)
-#define RT_OID_802_11_FRAGMENTATION_THRESHOLD (OID_GET_SET_TOGGLE | OID_802_11_FRAGMENTATION_THRESHOLD)
-#define RT_OID_802_11_RTS_THRESHOLD (OID_GET_SET_TOGGLE | OID_802_11_RTS_THRESHOLD)
-#define RT_OID_802_11_RX_ANTENNA_SELECTED (OID_GET_SET_TOGGLE | OID_802_11_RX_ANTENNA_SELECTED)
-#define RT_OID_802_11_TX_ANTENNA_SELECTED (OID_GET_SET_TOGGLE | OID_802_11_TX_ANTENNA_SELECTED)
-#define RT_OID_802_11_SUPPORTED_RATES (OID_GET_SET_TOGGLE | OID_802_11_SUPPORTED_RATES)
-#define RT_OID_802_11_DESIRED_RATES (OID_GET_SET_TOGGLE | OID_802_11_DESIRED_RATES)
-#define RT_OID_802_11_CONFIGURATION (OID_GET_SET_TOGGLE | OID_802_11_CONFIGURATION)
-#define RT_OID_802_11_POWER_MODE (OID_GET_SET_TOGGLE | OID_802_11_POWER_MODE)
-
-typedef enum _NDIS_802_11_STATUS_TYPE
-{
- Ndis802_11StatusType_Authentication,
- Ndis802_11StatusType_MediaStreamMode,
- Ndis802_11StatusType_PMKID_CandidateList,
- Ndis802_11StatusTypeMax // not a real type, defined as an upper bound
-} NDIS_802_11_STATUS_TYPE, *PNDIS_802_11_STATUS_TYPE;
-
-typedef UCHAR NDIS_802_11_MAC_ADDRESS[6];
-
-typedef struct _NDIS_802_11_STATUS_INDICATION
-{
- NDIS_802_11_STATUS_TYPE StatusType;
-} NDIS_802_11_STATUS_INDICATION, *PNDIS_802_11_STATUS_INDICATION;
-
-// mask for authentication/integrity fields
-#define NDIS_802_11_AUTH_REQUEST_AUTH_FIELDS 0x0f
-
-#define NDIS_802_11_AUTH_REQUEST_REAUTH 0x01
-#define NDIS_802_11_AUTH_REQUEST_KEYUPDATE 0x02
-#define NDIS_802_11_AUTH_REQUEST_PAIRWISE_ERROR 0x06
-#define NDIS_802_11_AUTH_REQUEST_GROUP_ERROR 0x0E
-
-typedef struct _NDIS_802_11_AUTHENTICATION_REQUEST
-{
- ULONG Length; // Length of structure
- NDIS_802_11_MAC_ADDRESS Bssid;
- ULONG Flags;
-} NDIS_802_11_AUTHENTICATION_REQUEST, *PNDIS_802_11_AUTHENTICATION_REQUEST;
-
-//Added new types for PMKID Candidate lists.
-typedef struct _PMKID_CANDIDATE {
- NDIS_802_11_MAC_ADDRESS BSSID;
- ULONG Flags;
-} PMKID_CANDIDATE, *PPMKID_CANDIDATE;
-
-typedef struct _NDIS_802_11_PMKID_CANDIDATE_LIST
-{
- ULONG Version; // Version of the structure
- ULONG NumCandidates; // No. of pmkid candidates
- PMKID_CANDIDATE CandidateList[1];
-} NDIS_802_11_PMKID_CANDIDATE_LIST, *PNDIS_802_11_PMKID_CANDIDATE_LIST;
-
-//Flags for PMKID Candidate list structure
-#define NDIS_802_11_PMKID_CANDIDATE_PREAUTH_ENABLED 0x01
-
-// Added new types for OFDM 5G and 2.4G
-typedef enum _NDIS_802_11_NETWORK_TYPE
-{
- Ndis802_11FH,
- Ndis802_11DS,
- Ndis802_11OFDM5,
- Ndis802_11OFDM5_N,
- Ndis802_11OFDM24,
- Ndis802_11OFDM24_N,
- Ndis802_11Automode,
- Ndis802_11NetworkTypeMax // not a real type, defined as an upper bound
-} NDIS_802_11_NETWORK_TYPE, *PNDIS_802_11_NETWORK_TYPE;
-
-typedef struct _NDIS_802_11_NETWORK_TYPE_LIST
-{
- UINT NumberOfItems; // in list below, at least 1
- NDIS_802_11_NETWORK_TYPE NetworkType [1];
-} NDIS_802_11_NETWORK_TYPE_LIST, *PNDIS_802_11_NETWORK_TYPE_LIST;
-
-typedef enum _NDIS_802_11_POWER_MODE
-{
- Ndis802_11PowerModeCAM,
- Ndis802_11PowerModeMAX_PSP,
- Ndis802_11PowerModeFast_PSP,
- Ndis802_11PowerModeLegacy_PSP,
- Ndis802_11PowerModeMax // not a real mode, defined as an upper bound
-} NDIS_802_11_POWER_MODE, *PNDIS_802_11_POWER_MODE;
-
-typedef ULONG NDIS_802_11_TX_POWER_LEVEL; // in milliwatts
-
-//
-// Received Signal Strength Indication
-//
-typedef LONG NDIS_802_11_RSSI; // in dBm
-
-typedef struct _NDIS_802_11_CONFIGURATION_FH
-{
- ULONG Length; // Length of structure
- ULONG HopPattern; // As defined by 802.11, MSB set
- ULONG HopSet; // to one if non-802.11
- ULONG DwellTime; // units are Kusec
-} NDIS_802_11_CONFIGURATION_FH, *PNDIS_802_11_CONFIGURATION_FH;
-
-typedef struct _NDIS_802_11_CONFIGURATION
-{
- ULONG Length; // Length of structure
- ULONG BeaconPeriod; // units are Kusec
- ULONG ATIMWindow; // units are Kusec
- ULONG DSConfig; // Frequency, units are kHz
- NDIS_802_11_CONFIGURATION_FH FHConfig;
-} NDIS_802_11_CONFIGURATION, *PNDIS_802_11_CONFIGURATION;
-
-typedef struct _NDIS_802_11_STATISTICS
-{
- ULONG Length; // Length of structure
- LARGE_INTEGER TransmittedFragmentCount;
- LARGE_INTEGER MulticastTransmittedFrameCount;
- LARGE_INTEGER FailedCount;
- LARGE_INTEGER RetryCount;
- LARGE_INTEGER MultipleRetryCount;
- LARGE_INTEGER RTSSuccessCount;
- LARGE_INTEGER RTSFailureCount;
- LARGE_INTEGER ACKFailureCount;
- LARGE_INTEGER FrameDuplicateCount;
- LARGE_INTEGER ReceivedFragmentCount;
- LARGE_INTEGER MulticastReceivedFrameCount;
- LARGE_INTEGER FCSErrorCount;
- LARGE_INTEGER TKIPLocalMICFailures;
- LARGE_INTEGER TKIPRemoteMICErrors;
- LARGE_INTEGER TKIPICVErrors;
- LARGE_INTEGER TKIPCounterMeasuresInvoked;
- LARGE_INTEGER TKIPReplays;
- LARGE_INTEGER CCMPFormatErrors;
- LARGE_INTEGER CCMPReplays;
- LARGE_INTEGER CCMPDecryptErrors;
- LARGE_INTEGER FourWayHandshakeFailures;
-} NDIS_802_11_STATISTICS, *PNDIS_802_11_STATISTICS;
-
-typedef ULONG NDIS_802_11_KEY_INDEX;
-typedef ULONGLONG NDIS_802_11_KEY_RSC;
-
-#define MAX_RADIUS_SRV_NUM 2 // 802.1x failover number
-
-typedef struct PACKED _RADIUS_SRV_INFO {
- UINT32 radius_ip;
- UINT32 radius_port;
- UCHAR radius_key[64];
- UCHAR radius_key_len;
-} RADIUS_SRV_INFO, *PRADIUS_SRV_INFO;
-
-typedef struct PACKED _RADIUS_KEY_INFO
-{
- UCHAR radius_srv_num;
- RADIUS_SRV_INFO radius_srv_info[MAX_RADIUS_SRV_NUM];
- UCHAR ieee8021xWEP; // dynamic WEP
- UCHAR key_index;
- UCHAR key_length; // length of key in bytes
- UCHAR key_material[13];
-} RADIUS_KEY_INFO, *PRADIUS_KEY_INFO;
-
-// It's used by 802.1x daemon to require relative configuration
-typedef struct PACKED _RADIUS_CONF
-{
- UINT32 Length; // Length of this structure
- UCHAR mbss_num; // indicate multiple BSS number
- UINT32 own_ip_addr;
- UINT32 retry_interval;
- UINT32 session_timeout_interval;
- UCHAR EAPifname[IFNAMSIZ];
- UCHAR EAPifname_len;
- UCHAR PreAuthifname[IFNAMSIZ];
- UCHAR PreAuthifname_len;
- RADIUS_KEY_INFO RadiusInfo[8/*MAX_MBSSID_NUM*/];
-} RADIUS_CONF, *PRADIUS_CONF;
-
-// Key mapping keys require a BSSID
-typedef struct _NDIS_802_11_KEY
-{
- UINT Length; // Length of this structure
- UINT KeyIndex;
- UINT KeyLength; // length of key in bytes
- NDIS_802_11_MAC_ADDRESS BSSID;
- NDIS_802_11_KEY_RSC KeyRSC;
- UCHAR KeyMaterial[1]; // variable length depending on above field
-} NDIS_802_11_KEY, *PNDIS_802_11_KEY;
-
-typedef struct _NDIS_802_11_REMOVE_KEY
-{
- UINT Length; // Length of this structure
- UINT KeyIndex;
- NDIS_802_11_MAC_ADDRESS BSSID;
-} NDIS_802_11_REMOVE_KEY, *PNDIS_802_11_REMOVE_KEY;
-
-typedef struct _NDIS_802_11_WEP
-{
- UINT Length; // Length of this structure
- UINT KeyIndex; // 0 is the per-client key, 1-N are the
- // global keys
- UINT KeyLength; // length of key in bytes
- UCHAR KeyMaterial[1];// variable length depending on above field
-} NDIS_802_11_WEP, *PNDIS_802_11_WEP;
-
-
-typedef enum _NDIS_802_11_NETWORK_INFRASTRUCTURE
-{
- Ndis802_11IBSS,
- Ndis802_11Infrastructure,
- Ndis802_11AutoUnknown,
- Ndis802_11Monitor,
- Ndis802_11InfrastructureMax // Not a real value, defined as upper bound
-} NDIS_802_11_NETWORK_INFRASTRUCTURE, *PNDIS_802_11_NETWORK_INFRASTRUCTURE;
-
-// Add new authentication modes
-typedef enum _NDIS_802_11_AUTHENTICATION_MODE
-{
- Ndis802_11AuthModeOpen,
- Ndis802_11AuthModeShared,
- Ndis802_11AuthModeAutoSwitch,
- Ndis802_11AuthModeWPA,
- Ndis802_11AuthModeWPAPSK,
- Ndis802_11AuthModeWPANone,
- Ndis802_11AuthModeWPA2,
- Ndis802_11AuthModeWPA2PSK,
- Ndis802_11AuthModeWPA1WPA2,
- Ndis802_11AuthModeWPA1PSKWPA2PSK,
- Ndis802_11AuthModeMax // Not a real mode, defined as upper bound
-} NDIS_802_11_AUTHENTICATION_MODE, *PNDIS_802_11_AUTHENTICATION_MODE;
-
-typedef UCHAR NDIS_802_11_RATES[NDIS_802_11_LENGTH_RATES]; // Set of 8 data rates
-typedef UCHAR NDIS_802_11_RATES_EX[NDIS_802_11_LENGTH_RATES_EX]; // Set of 16 data rates
-
-typedef struct PACKED _NDIS_802_11_SSID
-{
- UINT SsidLength; // length of SSID field below, in bytes;
- // this can be zero.
- UCHAR Ssid[NDIS_802_11_LENGTH_SSID]; // SSID information field
-} NDIS_802_11_SSID, *PNDIS_802_11_SSID;
-
-
-typedef struct PACKED _NDIS_WLAN_BSSID
-{
- ULONG Length; // Length of this structure
- NDIS_802_11_MAC_ADDRESS MacAddress; // BSSID
- UCHAR Reserved[2];
- NDIS_802_11_SSID Ssid; // SSID
- ULONG Privacy; // WEP encryption requirement
- NDIS_802_11_RSSI Rssi; // receive signal strength in dBm
- NDIS_802_11_NETWORK_TYPE NetworkTypeInUse;
- NDIS_802_11_CONFIGURATION Configuration;
- NDIS_802_11_NETWORK_INFRASTRUCTURE InfrastructureMode;
- NDIS_802_11_RATES SupportedRates;
-} NDIS_WLAN_BSSID, *PNDIS_WLAN_BSSID;
-
-typedef struct PACKED _NDIS_802_11_BSSID_LIST
-{
- UINT NumberOfItems; // in list below, at least 1
- NDIS_WLAN_BSSID Bssid[1];
-} NDIS_802_11_BSSID_LIST, *PNDIS_802_11_BSSID_LIST;
-
-// Added Capabilities, IELength and IEs for each BSSID
-typedef struct PACKED _NDIS_WLAN_BSSID_EX
-{
- ULONG Length; // Length of this structure
- NDIS_802_11_MAC_ADDRESS MacAddress; // BSSID
- UCHAR Reserved[2];
- NDIS_802_11_SSID Ssid; // SSID
- UINT Privacy; // WEP encryption requirement
- NDIS_802_11_RSSI Rssi; // receive signal
- // strength in dBm
- NDIS_802_11_NETWORK_TYPE NetworkTypeInUse;
- NDIS_802_11_CONFIGURATION Configuration;
- NDIS_802_11_NETWORK_INFRASTRUCTURE InfrastructureMode;
- NDIS_802_11_RATES_EX SupportedRates;
- ULONG IELength;
- UCHAR IEs[1];
-} NDIS_WLAN_BSSID_EX, *PNDIS_WLAN_BSSID_EX;
-
-typedef struct PACKED _NDIS_802_11_BSSID_LIST_EX
-{
- UINT NumberOfItems; // in list below, at least 1
- NDIS_WLAN_BSSID_EX Bssid[1];
-} NDIS_802_11_BSSID_LIST_EX, *PNDIS_802_11_BSSID_LIST_EX;
-
-typedef struct PACKED _NDIS_802_11_FIXED_IEs
-{
- UCHAR Timestamp[8];
- USHORT BeaconInterval;
- USHORT Capabilities;
-} NDIS_802_11_FIXED_IEs, *PNDIS_802_11_FIXED_IEs;
-
-typedef struct _NDIS_802_11_VARIABLE_IEs
-{
- UCHAR ElementID;
- UCHAR Length; // Number of bytes in data field
- UCHAR data[1];
-} NDIS_802_11_VARIABLE_IEs, *PNDIS_802_11_VARIABLE_IEs;
-
-typedef ULONG NDIS_802_11_FRAGMENTATION_THRESHOLD;
-
-typedef ULONG NDIS_802_11_RTS_THRESHOLD;
-
-typedef ULONG NDIS_802_11_ANTENNA;
-
-typedef enum _NDIS_802_11_PRIVACY_FILTER
-{
- Ndis802_11PrivFilterAcceptAll,
- Ndis802_11PrivFilter8021xWEP
-} NDIS_802_11_PRIVACY_FILTER, *PNDIS_802_11_PRIVACY_FILTER;
-
-// Added new encryption types
-// Also aliased typedef to new name
-typedef enum _NDIS_802_11_WEP_STATUS
-{
- Ndis802_11WEPEnabled,
- Ndis802_11Encryption1Enabled = Ndis802_11WEPEnabled,
- Ndis802_11WEPDisabled,
- Ndis802_11EncryptionDisabled = Ndis802_11WEPDisabled,
- Ndis802_11WEPKeyAbsent,
- Ndis802_11Encryption1KeyAbsent = Ndis802_11WEPKeyAbsent,
- Ndis802_11WEPNotSupported,
- Ndis802_11EncryptionNotSupported = Ndis802_11WEPNotSupported,
- Ndis802_11Encryption2Enabled,
- Ndis802_11Encryption2KeyAbsent,
- Ndis802_11Encryption3Enabled,
- Ndis802_11Encryption3KeyAbsent,
- Ndis802_11Encryption4Enabled, // TKIP or AES mix
- Ndis802_11Encryption4KeyAbsent,
-#ifndef RT30xx
- Ndis802_11GroupWEP40Enabled,
- Ndis802_11GroupWEP104Enabled,
-#endif
-} NDIS_802_11_WEP_STATUS, *PNDIS_802_11_WEP_STATUS,
- NDIS_802_11_ENCRYPTION_STATUS, *PNDIS_802_11_ENCRYPTION_STATUS;
-
-typedef enum _NDIS_802_11_RELOAD_DEFAULTS
-{
- Ndis802_11ReloadWEPKeys
-} NDIS_802_11_RELOAD_DEFAULTS, *PNDIS_802_11_RELOAD_DEFAULTS;
-
-#define NDIS_802_11_AI_REQFI_CAPABILITIES 1
-#define NDIS_802_11_AI_REQFI_LISTENINTERVAL 2
-#define NDIS_802_11_AI_REQFI_CURRENTAPADDRESS 4
-
-#define NDIS_802_11_AI_RESFI_CAPABILITIES 1
-#define NDIS_802_11_AI_RESFI_STATUSCODE 2
-#define NDIS_802_11_AI_RESFI_ASSOCIATIONID 4
-
-typedef struct _NDIS_802_11_AI_REQFI
-{
- USHORT Capabilities;
- USHORT ListenInterval;
- NDIS_802_11_MAC_ADDRESS CurrentAPAddress;
-} NDIS_802_11_AI_REQFI, *PNDIS_802_11_AI_REQFI;
-
-typedef struct _NDIS_802_11_AI_RESFI
-{
- USHORT Capabilities;
- USHORT StatusCode;
- USHORT AssociationId;
-} NDIS_802_11_AI_RESFI, *PNDIS_802_11_AI_RESFI;
-
-typedef struct _NDIS_802_11_ASSOCIATION_INFORMATION
-{
- ULONG Length;
- USHORT AvailableRequestFixedIEs;
- NDIS_802_11_AI_REQFI RequestFixedIEs;
- ULONG RequestIELength;
- ULONG OffsetRequestIEs;
- USHORT AvailableResponseFixedIEs;
- NDIS_802_11_AI_RESFI ResponseFixedIEs;
- ULONG ResponseIELength;
- ULONG OffsetResponseIEs;
-} NDIS_802_11_ASSOCIATION_INFORMATION, *PNDIS_802_11_ASSOCIATION_INFORMATION;
-
-typedef struct _NDIS_802_11_AUTHENTICATION_EVENT
-{
- NDIS_802_11_STATUS_INDICATION Status;
- NDIS_802_11_AUTHENTICATION_REQUEST Request[1];
-} NDIS_802_11_AUTHENTICATION_EVENT, *PNDIS_802_11_AUTHENTICATION_EVENT;
-
-// 802.11 Media stream constraints, associated with OID_802_11_MEDIA_STREAM_MODE
-typedef enum _NDIS_802_11_MEDIA_STREAM_MODE
-{
- Ndis802_11MediaStreamOff,
- Ndis802_11MediaStreamOn,
-} NDIS_802_11_MEDIA_STREAM_MODE, *PNDIS_802_11_MEDIA_STREAM_MODE;
-
-// PMKID Structures
-typedef UCHAR NDIS_802_11_PMKID_VALUE[16];
-
-typedef struct _BSSID_INFO
-{
- NDIS_802_11_MAC_ADDRESS BSSID;
- NDIS_802_11_PMKID_VALUE PMKID;
-} BSSID_INFO, *PBSSID_INFO;
-
-typedef struct _NDIS_802_11_PMKID
-{
- UINT Length;
- UINT BSSIDInfoCount;
- BSSID_INFO BSSIDInfo[1];
-} NDIS_802_11_PMKID, *PNDIS_802_11_PMKID;
-
-typedef struct _NDIS_802_11_AUTHENTICATION_ENCRYPTION
-{
- NDIS_802_11_AUTHENTICATION_MODE AuthModeSupported;
- NDIS_802_11_ENCRYPTION_STATUS EncryptStatusSupported;
-} NDIS_802_11_AUTHENTICATION_ENCRYPTION, *PNDIS_802_11_AUTHENTICATION_ENCRYPTION;
-
-typedef struct _NDIS_802_11_CAPABILITY
-{
- ULONG Length;
- ULONG Version;
- ULONG NoOfPMKIDs;
- ULONG NoOfAuthEncryptPairsSupported;
- NDIS_802_11_AUTHENTICATION_ENCRYPTION AuthenticationEncryptionSupported[1];
-} NDIS_802_11_CAPABILITY, *PNDIS_802_11_CAPABILITY;
-
-#if WIRELESS_EXT <= 11
-#ifndef SIOCDEVPRIVATE
-#define SIOCDEVPRIVATE 0x8BE0
-#endif
-#define SIOCIWFIRSTPRIV SIOCDEVPRIVATE
-#endif
-
-#ifdef RT30xx
-#define RT_PRIV_IOCTL_EXT (SIOCIWFIRSTPRIV + 0x01) // Sync. with AP for wsc upnp daemon
-#endif
-#define RTPRIV_IOCTL_SET (SIOCIWFIRSTPRIV + 0x02)
-
-#ifdef DBG
-#define RTPRIV_IOCTL_BBP (SIOCIWFIRSTPRIV + 0x03)
-#define RTPRIV_IOCTL_MAC (SIOCIWFIRSTPRIV + 0x05)
-#ifdef RT30xx
-#define RTPRIV_IOCTL_RF (SIOCIWFIRSTPRIV + 0x13)
-#endif
-#define RTPRIV_IOCTL_E2P (SIOCIWFIRSTPRIV + 0x07)
-#endif
-
-#define RTPRIV_IOCTL_STATISTICS (SIOCIWFIRSTPRIV + 0x09)
-#define RTPRIV_IOCTL_ADD_PMKID_CACHE (SIOCIWFIRSTPRIV + 0x0A)
-#define RTPRIV_IOCTL_RADIUS_DATA (SIOCIWFIRSTPRIV + 0x0C)
-#define RTPRIV_IOCTL_GSITESURVEY (SIOCIWFIRSTPRIV + 0x0D)
-#define RT_PRIV_IOCTL (SIOCIWFIRSTPRIV + 0x0E) // Sync. with RT61 (for wpa_supplicant)
-#define RTPRIV_IOCTL_GET_MAC_TABLE (SIOCIWFIRSTPRIV + 0x0F)
-
-#define RTPRIV_IOCTL_SHOW (SIOCIWFIRSTPRIV + 0x11)
-enum {
- SHOW_CONN_STATUS = 4,
- SHOW_DRVIER_VERION = 5,
- SHOW_BA_INFO = 6,
- SHOW_DESC_INFO = 7,
-#ifdef RT2870
- SHOW_RXBULK_INFO = 8,
- SHOW_TXBULK_INFO = 9,
-#endif // RT2870 //
- RAIO_OFF = 10,
- RAIO_ON = 11,
- SHOW_CFG_VALUE = 20,
-#ifndef RT30xx
- SHOW_ADHOC_ENTRY_INFO = 21,
-#endif
-};
-
-#define OID_802_11_BUILD_CHANNEL_EX 0x0714
-#define OID_802_11_GET_CH_LIST 0x0715
-#define OID_802_11_GET_COUNTRY_CODE 0x0716
-#define OID_802_11_GET_CHANNEL_GEOGRAPHY 0x0717
-
-#ifdef RT30xx
-#define RT_OID_WSC_SET_PASSPHRASE 0x0740 // passphrase for wpa(2)-psk
-#define RT_OID_WSC_DRIVER_AUTO_CONNECT 0x0741
-#define RT_OID_WSC_QUERY_DEFAULT_PROFILE 0x0742
-#define RT_OID_WSC_SET_CONN_BY_PROFILE_INDEX 0x0743
-#define RT_OID_WSC_SET_ACTION 0x0744
-#define RT_OID_WSC_SET_SSID 0x0745
-#define RT_OID_WSC_SET_PIN_CODE 0x0746
-#define RT_OID_WSC_SET_MODE 0x0747 // PIN or PBC
-#define RT_OID_WSC_SET_CONF_MODE 0x0748 // Enrollee or Registrar
-#define RT_OID_WSC_SET_PROFILE 0x0749
-
-#define RT_OID_802_11_WSC_QUERY_PROFILE 0x0750
-// for consistency with RT61
-#define RT_OID_WSC_QUERY_STATUS 0x0751
-#define RT_OID_WSC_PIN_CODE 0x0752
-#define RT_OID_WSC_UUID 0x0753
-#define RT_OID_WSC_SET_SELECTED_REGISTRAR 0x0754
-#define RT_OID_WSC_EAPMSG 0x0755
-#define RT_OID_WSC_MANUFACTURER 0x0756
-#define RT_OID_WSC_MODEL_NAME 0x0757
-#define RT_OID_WSC_MODEL_NO 0x0758
-#define RT_OID_WSC_SERIAL_NO 0x0759
-#define RT_OID_WSC_MAC_ADDRESS 0x0760
-#endif
-
-#ifdef LLTD_SUPPORT
-// for consistency with RT61
-#define RT_OID_GET_PHY_MODE 0x761
-#endif // LLTD_SUPPORT //
-
-#ifdef RT30xx
-// New for MeetingHouse Api support
-#define OID_MH_802_1X_SUPPORTED 0xFFEDC100
-#endif
-
-// MIMO Tx parameter, ShortGI, MCS, STBC, etc. these are fields in TXWI. Don't change this definition!!!
-typedef union _HTTRANSMIT_SETTING {
- struct {
- USHORT MCS:7; // MCS
- USHORT BW:1; //channel bandwidth 20MHz or 40 MHz
- USHORT ShortGI:1;
- USHORT STBC:2; //SPACE
- USHORT rsv:2;
- USHORT TxBF:1;
- USHORT MODE:2; // Use definition MODE_xxx.
- } field;
- USHORT word;
- } HTTRANSMIT_SETTING, *PHTTRANSMIT_SETTING;
-
-typedef enum _RT_802_11_PREAMBLE {
- Rt802_11PreambleLong,
- Rt802_11PreambleShort,
- Rt802_11PreambleAuto
-} RT_802_11_PREAMBLE, *PRT_802_11_PREAMBLE;
-
-// Only for STA, need to sync with AP
-typedef enum _RT_802_11_PHY_MODE {
- PHY_11BG_MIXED = 0,
- PHY_11B,
- PHY_11A,
- PHY_11ABG_MIXED,
- PHY_11G,
- PHY_11ABGN_MIXED, // both band 5
- PHY_11N_2_4G, // 11n-only with 2.4G band 6
- PHY_11GN_MIXED, // 2.4G band 7
- PHY_11AN_MIXED, // 5G band 8
- PHY_11BGN_MIXED, // if check 802.11b. 9
- PHY_11AGN_MIXED, // if check 802.11b. 10
- PHY_11N_5G, // 11n-only with 5G band 11
-} RT_802_11_PHY_MODE;
-
-// put all proprietery for-query objects here to reduce # of Query_OID
-typedef struct _RT_802_11_LINK_STATUS {
- ULONG CurrTxRate; // in units of 0.5Mbps
- ULONG ChannelQuality; // 0..100 %
- ULONG TxByteCount; // both ok and fail
- ULONG RxByteCount; // both ok and fail
- ULONG CentralChannel; // 40MHz central channel number
-} RT_802_11_LINK_STATUS, *PRT_802_11_LINK_STATUS;
-
-typedef struct _RT_802_11_EVENT_LOG {
- LARGE_INTEGER SystemTime; // timestammp via NdisGetCurrentSystemTime()
- UCHAR Addr[MAC_ADDR_LENGTH];
- USHORT Event; // EVENT_xxx
-} RT_802_11_EVENT_LOG, *PRT_802_11_EVENT_LOG;
-
-typedef struct _RT_802_11_EVENT_TABLE {
- ULONG Num;
- ULONG Rsv; // to align Log[] at LARGE_INEGER boundary
- RT_802_11_EVENT_LOG Log[MAX_NUMBER_OF_EVENT];
-} RT_802_11_EVENT_TABLE, PRT_802_11_EVENT_TABLE;
-
-// MIMO Tx parameter, ShortGI, MCS, STBC, etc. these are fields in TXWI. Don't change this definition!!!
-typedef union _MACHTTRANSMIT_SETTING {
- struct {
- USHORT MCS:7; // MCS
- USHORT BW:1; //channel bandwidth 20MHz or 40 MHz
- USHORT ShortGI:1;
- USHORT STBC:2; //SPACE
- USHORT rsv:3;
- USHORT MODE:2; // Use definition MODE_xxx.
- } field;
- USHORT word;
- } MACHTTRANSMIT_SETTING, *PMACHTTRANSMIT_SETTING;
-
-typedef struct _RT_802_11_MAC_ENTRY {
- UCHAR Addr[MAC_ADDR_LENGTH];
- UCHAR Aid;
- UCHAR Psm; // 0:PWR_ACTIVE, 1:PWR_SAVE
- UCHAR MimoPs; // 0:MMPS_STATIC, 1:MMPS_DYNAMIC, 3:MMPS_Enabled
- CHAR AvgRssi0;
- CHAR AvgRssi1;
- CHAR AvgRssi2;
- UINT32 ConnectedTime;
- MACHTTRANSMIT_SETTING TxRate;
-} RT_802_11_MAC_ENTRY, *PRT_802_11_MAC_ENTRY;
-
-typedef struct _RT_802_11_MAC_TABLE {
- ULONG Num;
- RT_802_11_MAC_ENTRY Entry[MAX_NUMBER_OF_MAC];
-} RT_802_11_MAC_TABLE, *PRT_802_11_MAC_TABLE;
-
-// structure for query/set hardware register - MAC, BBP, RF register
-typedef struct _RT_802_11_HARDWARE_REGISTER {
- ULONG HardwareType; // 0:MAC, 1:BBP, 2:RF register, 3:EEPROM
- ULONG Offset; // Q/S register offset addr
- ULONG Data; // R/W data buffer
-} RT_802_11_HARDWARE_REGISTER, *PRT_802_11_HARDWARE_REGISTER;
-
-typedef struct _RT_802_11_AP_CONFIG {
- ULONG EnableTxBurst; // 0-disable, 1-enable
- ULONG EnableTurboRate; // 0-disable, 1-enable 72/100mbps turbo rate
- ULONG IsolateInterStaTraffic; // 0-disable, 1-enable isolation
- ULONG HideSsid; // 0-disable, 1-enable hiding
- ULONG UseBGProtection; // 0-AUTO, 1-always ON, 2-always OFF
- ULONG UseShortSlotTime; // 0-no use, 1-use 9-us short slot time
- ULONG Rsv1; // must be 0
- ULONG SystemErrorBitmap; // ignore upon SET, return system error upon QUERY
-} RT_802_11_AP_CONFIG, *PRT_802_11_AP_CONFIG;
-
-// structure to query/set STA_CONFIG
-typedef struct _RT_802_11_STA_CONFIG {
- ULONG EnableTxBurst; // 0-disable, 1-enable
- ULONG EnableTurboRate; // 0-disable, 1-enable 72/100mbps turbo rate
- ULONG UseBGProtection; // 0-AUTO, 1-always ON, 2-always OFF
- ULONG UseShortSlotTime; // 0-no use, 1-use 9-us short slot time when applicable
- ULONG AdhocMode; // 0-11b rates only (WIFI spec), 1 - b/g mixed, 2 - g only
- ULONG HwRadioStatus; // 0-OFF, 1-ON, default is 1, Read-Only
- ULONG Rsv1; // must be 0
- ULONG SystemErrorBitmap; // ignore upon SET, return system error upon QUERY
-} RT_802_11_STA_CONFIG, *PRT_802_11_STA_CONFIG;
-
-//
-// For OID Query or Set about BA structure
-//
-typedef struct _OID_BACAP_STRUC {
- UCHAR RxBAWinLimit;
- UCHAR TxBAWinLimit;
- UCHAR Policy; // 0: DELAY_BA 1:IMMED_BA (//BA Policy subfiled value in ADDBA frame) 2:BA-not use. other value invalid
- UCHAR MpduDensity; // 0: DELAY_BA 1:IMMED_BA (//BA Policy subfiled value in ADDBA frame) 2:BA-not use. other value invalid
- UCHAR AmsduEnable; //Enable AMSDU transmisstion
- UCHAR AmsduSize; // 0:3839, 1:7935 bytes. UINT MSDUSizeToBytes[] = { 3839, 7935};
- UCHAR MMPSmode; // MIMO power save more, 0:static, 1:dynamic, 2:rsv, 3:mimo enable
- BOOLEAN AutoBA; // Auto BA will automatically
-} OID_BACAP_STRUC, *POID_BACAP_STRUC;
-
-typedef struct _RT_802_11_ACL_ENTRY {
- UCHAR Addr[MAC_ADDR_LENGTH];
- USHORT Rsv;
-} RT_802_11_ACL_ENTRY, *PRT_802_11_ACL_ENTRY;
-
-typedef struct PACKED _RT_802_11_ACL {
- ULONG Policy; // 0-disable, 1-positive list, 2-negative list
- ULONG Num;
- RT_802_11_ACL_ENTRY Entry[MAX_NUMBER_OF_ACL];
-} RT_802_11_ACL, *PRT_802_11_ACL;
-
-typedef struct _RT_802_11_WDS {
- ULONG Num;
- NDIS_802_11_MAC_ADDRESS Entry[24/*MAX_NUM_OF_WDS_LINK*/];
- ULONG KeyLength;
- UCHAR KeyMaterial[32];
-} RT_802_11_WDS, *PRT_802_11_WDS;
-
-typedef struct _RT_802_11_TX_RATES_ {
- UCHAR SupRateLen;
- UCHAR SupRate[MAX_LENGTH_OF_SUPPORT_RATES];
- UCHAR ExtRateLen;
- UCHAR ExtRate[MAX_LENGTH_OF_SUPPORT_RATES];
-} RT_802_11_TX_RATES, *PRT_802_11_TX_RATES;
-
-
-// Definition of extra information code
-#define GENERAL_LINK_UP 0x0 // Link is Up
-#define GENERAL_LINK_DOWN 0x1 // Link is Down
-#define HW_RADIO_OFF 0x2 // Hardware radio off
-#define SW_RADIO_OFF 0x3 // Software radio off
-#define AUTH_FAIL 0x4 // Open authentication fail
-#define AUTH_FAIL_KEYS 0x5 // Shared authentication fail
-#define ASSOC_FAIL 0x6 // Association failed
-#define EAP_MIC_FAILURE 0x7 // Deauthencation because MIC failure
-#define EAP_4WAY_TIMEOUT 0x8 // Deauthencation on 4-way handshake timeout
-#define EAP_GROUP_KEY_TIMEOUT 0x9 // Deauthencation on group key handshake timeout
-#define EAP_SUCCESS 0xa // EAP succeed
-#define DETECT_RADAR_SIGNAL 0xb // Radar signal occur in current channel
-#define EXTRA_INFO_MAX 0xb // Indicate Last OID
-
-#define EXTRA_INFO_CLEAR 0xffffffff
-
-// This is OID setting structure. So only GF or MM as Mode. This is valid when our wirelss mode has 802.11n in use.
-typedef struct {
- RT_802_11_PHY_MODE PhyMode; //
- UCHAR TransmitNo;
- UCHAR HtMode; //HTMODE_GF or HTMODE_MM
- UCHAR ExtOffset; //extension channel above or below
- UCHAR MCS;
- UCHAR BW;
- UCHAR STBC;
- UCHAR SHORTGI;
- UCHAR rsv;
-} OID_SET_HT_PHYMODE, *POID_SET_HT_PHYMODE;
-
-#ifdef LLTD_SUPPORT
-typedef struct _RT_LLTD_ASSOICATION_ENTRY {
- UCHAR Addr[ETH_LENGTH_OF_ADDRESS];
- unsigned short MOR; // maximum operational rate
- UCHAR phyMode;
-} RT_LLTD_ASSOICATION_ENTRY, *PRT_LLTD_ASSOICATION_ENTRY;
-
-typedef struct _RT_LLTD_ASSOICATION_TABLE {
- unsigned int Num;
- RT_LLTD_ASSOICATION_ENTRY Entry[MAX_NUMBER_OF_MAC];
-} RT_LLTD_ASSOICATION_TABLE, *PRT_LLTD_ASSOICATION_TABLE;
-#endif // LLTD_SUPPORT //
-
-#define MAX_CUSTOM_LEN 128
-
-typedef enum _RT_802_11_D_CLIENT_MODE
-{
- Rt802_11_D_None,
- Rt802_11_D_Flexible,
- Rt802_11_D_Strict,
-} RT_802_11_D_CLIENT_MODE, *PRT_802_11_D_CLIENT_MODE;
-
-typedef struct _RT_CHANNEL_LIST_INFO
-{
- UCHAR ChannelList[MAX_NUM_OF_CHS]; // list all supported channels for site survey
- UCHAR ChannelListNum; // number of channel in ChannelList[]
-} RT_CHANNEL_LIST_INFO, *PRT_CHANNEL_LIST_INFO;
-
-// WSC configured credential
-typedef struct _WSC_CREDENTIAL
-{
- NDIS_802_11_SSID SSID; // mandatory
- USHORT AuthType; // mandatory, 1: open, 2: wpa-psk, 4: shared, 8:wpa, 0x10: wpa2, 0x20: wpa2-psk
- USHORT EncrType; // mandatory, 1: none, 2: wep, 4: tkip, 8: aes
- UCHAR Key[64]; // mandatory, Maximum 64 byte
- USHORT KeyLength;
- UCHAR MacAddr[6]; // mandatory, AP MAC address
- UCHAR KeyIndex; // optional, default is 1
- UCHAR Rsvd[3]; // Make alignment
-} WSC_CREDENTIAL, *PWSC_CREDENTIAL;
-
-// WSC configured profiles
-typedef struct _WSC_PROFILE
-{
- UINT ProfileCnt;
- WSC_CREDENTIAL Profile[8]; // Support up to 8 profiles
-} WSC_PROFILE, *PWSC_PROFILE;
-
-
-#endif // _OID_H_
-
+#include "../rt2860/oid.h"
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
-
- Module Name:
- rt28xx.h
-
- Abstract:
- RT28xx ASIC related definition & structures
-
- Revision History:
- Who When What
- -------- ---------- ----------------------------------------------
- Jan Lee Jan-3-2006 created for RT2860c
-*/
-
-#ifndef __RT28XX_H__
-#define __RT28XX_H__
-
-
-//
-// PCI registers - base address 0x0000
-//
-#define PCI_CFG 0x0000
-#define PCI_EECTRL 0x0004
-#define PCI_MCUCTRL 0x0008
-
-#ifdef RT30xx
-#define OPT_14 0x114
-
-typedef int NTSTATUS;
-#define RETRY_LIMIT 10
-#define STATUS_SUCCESS 0x00
-#define STATUS_UNSUCCESSFUL 0x01
-#endif
-
-//
-// SCH/DMA registers - base address 0x0200
-//
-// INT_SOURCE_CSR: Interrupt source register. Write one to clear corresponding bit
-//
-#define DMA_CSR0 0x200
-#define INT_SOURCE_CSR 0x200
-typedef union _INT_SOURCE_CSR_STRUC {
- struct {
- UINT32 RxDelayINT:1;
- UINT32 TxDelayINT:1;
- UINT32 RxDone:1;
- UINT32 Ac0DmaDone:1;//4
- UINT32 Ac1DmaDone:1;
- UINT32 Ac2DmaDone:1;
- UINT32 Ac3DmaDone:1;
- UINT32 HccaDmaDone:1; // bit7
- UINT32 MgmtDmaDone:1;
- UINT32 MCUCommandINT:1;//bit 9
- UINT32 RxTxCoherent:1;
- UINT32 TBTTInt:1;
- UINT32 PreTBTT:1;
- UINT32 TXFifoStatusInt:1;//FIFO Statistics is full, sw should read 0x171c
- UINT32 AutoWakeup:1;//bit14
- UINT32 GPTimer:1;
- UINT32 RxCoherent:1;//bit16
- UINT32 TxCoherent:1;
- UINT32 :14;
- } field;
- UINT32 word;
-} INT_SOURCE_CSR_STRUC, *PINT_SOURCE_CSR_STRUC;
-
-//
-// INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF
-//
-#define INT_MASK_CSR 0x204
-typedef union _INT_MASK_CSR_STRUC {
- struct {
- UINT32 RXDelay_INT_MSK:1;
- UINT32 TxDelay:1;
- UINT32 RxDone:1;
- UINT32 Ac0DmaDone:1;
- UINT32 Ac1DmaDone:1;
- UINT32 Ac2DmaDone:1;
- UINT32 Ac3DmaDone:1;
- UINT32 HccaDmaDone:1;
- UINT32 MgmtDmaDone:1;
- UINT32 MCUCommandINT:1;
- UINT32 :20;
- UINT32 RxCoherent:1;
- UINT32 TxCoherent:1;
- } field;
- UINT32 word;
-} INT_MASK_CSR_STRUC, *PINT_MASK_CSR_STRUC;
-
-#define WPDMA_GLO_CFG 0x208
-typedef union _WPDMA_GLO_CFG_STRUC {
- struct {
- UINT32 EnableTxDMA:1;
- UINT32 TxDMABusy:1;
- UINT32 EnableRxDMA:1;
- UINT32 RxDMABusy:1;
- UINT32 WPDMABurstSIZE:2;
- UINT32 EnTXWriteBackDDONE:1;
- UINT32 BigEndian:1;
- UINT32 RXHdrScater:8;
- UINT32 HDR_SEG_LEN:16;
- } field;
- UINT32 word;
-} WPDMA_GLO_CFG_STRUC, *PWPDMA_GLO_CFG_STRUC;
-
-#define WPDMA_RST_IDX 0x20c
-typedef union _WPDMA_RST_IDX_STRUC {
- struct {
- UINT32 RST_DTX_IDX0:1;
- UINT32 RST_DTX_IDX1:1;
- UINT32 RST_DTX_IDX2:1;
- UINT32 RST_DTX_IDX3:1;
- UINT32 RST_DTX_IDX4:1;
- UINT32 RST_DTX_IDX5:1;
- UINT32 rsv:10;
- UINT32 RST_DRX_IDX0:1;
- UINT32 :15;
- } field;
- UINT32 word;
-} WPDMA_RST_IDX_STRUC, *PWPDMA_RST_IDX_STRUC;
-
-#define DELAY_INT_CFG 0x0210
-typedef union _DELAY_INT_CFG_STRUC {
- struct {
- UINT32 RXMAX_PTIME:8;
- UINT32 RXMAX_PINT:7;
- UINT32 RXDLY_INT_EN:1;
- UINT32 TXMAX_PTIME:8;
- UINT32 TXMAX_PINT:7;
- UINT32 TXDLY_INT_EN:1;
- } field;
- UINT32 word;
-} DELAY_INT_CFG_STRUC, *PDELAY_INT_CFG_STRUC;
-
-#define WMM_AIFSN_CFG 0x0214
-typedef union _AIFSN_CSR_STRUC {
- struct {
- UINT32 Aifsn0:4; // for AC_BE
- UINT32 Aifsn1:4; // for AC_BK
- UINT32 Aifsn2:4; // for AC_VI
- UINT32 Aifsn3:4; // for AC_VO
- UINT32 Rsv:16;
- } field;
- UINT32 word;
-} AIFSN_CSR_STRUC, *PAIFSN_CSR_STRUC;
-
-//
-// CWMIN_CSR: CWmin for each EDCA AC
-//
-#define WMM_CWMIN_CFG 0x0218
-typedef union _CWMIN_CSR_STRUC {
- struct {
- UINT32 Cwmin0:4; // for AC_BE
- UINT32 Cwmin1:4; // for AC_BK
- UINT32 Cwmin2:4; // for AC_VI
- UINT32 Cwmin3:4; // for AC_VO
- UINT32 Rsv:16;
- } field;
- UINT32 word;
-} CWMIN_CSR_STRUC, *PCWMIN_CSR_STRUC;
-
-//
-// CWMAX_CSR: CWmin for each EDCA AC
-//
-#define WMM_CWMAX_CFG 0x021c
-typedef union _CWMAX_CSR_STRUC {
- struct {
- UINT32 Cwmax0:4; // for AC_BE
- UINT32 Cwmax1:4; // for AC_BK
- UINT32 Cwmax2:4; // for AC_VI
- UINT32 Cwmax3:4; // for AC_VO
- UINT32 Rsv:16;
- } field;
- UINT32 word;
-} CWMAX_CSR_STRUC, *PCWMAX_CSR_STRUC;
-
-//
-// AC_TXOP_CSR0: AC_BK/AC_BE TXOP register
-//
-#define WMM_TXOP0_CFG 0x0220
-typedef union _AC_TXOP_CSR0_STRUC {
- struct {
- USHORT Ac0Txop; // for AC_BK, in unit of 32us
- USHORT Ac1Txop; // for AC_BE, in unit of 32us
- } field;
- UINT32 word;
-} AC_TXOP_CSR0_STRUC, *PAC_TXOP_CSR0_STRUC;
-
-//
-// AC_TXOP_CSR1: AC_VO/AC_VI TXOP register
-//
-#define WMM_TXOP1_CFG 0x0224
-typedef union _AC_TXOP_CSR1_STRUC {
- struct {
- USHORT Ac2Txop; // for AC_VI, in unit of 32us
- USHORT Ac3Txop; // for AC_VO, in unit of 32us
- } field;
- UINT32 word;
-} AC_TXOP_CSR1_STRUC, *PAC_TXOP_CSR1_STRUC;
-
-#define RINGREG_DIFF 0x10
-#define GPIO_CTRL_CFG 0x0228 //MAC_CSR13
-#define MCU_CMD_CFG 0x022c
-#define TX_BASE_PTR0 0x0230 //AC_BK base address
-#define TX_MAX_CNT0 0x0234
-#define TX_CTX_IDX0 0x0238
-#define TX_DTX_IDX0 0x023c
-#define TX_BASE_PTR1 0x0240 //AC_BE base address
-#define TX_MAX_CNT1 0x0244
-#define TX_CTX_IDX1 0x0248
-#define TX_DTX_IDX1 0x024c
-#define TX_BASE_PTR2 0x0250 //AC_VI base address
-#define TX_MAX_CNT2 0x0254
-#define TX_CTX_IDX2 0x0258
-#define TX_DTX_IDX2 0x025c
-#define TX_BASE_PTR3 0x0260 //AC_VO base address
-#define TX_MAX_CNT3 0x0264
-#define TX_CTX_IDX3 0x0268
-#define TX_DTX_IDX3 0x026c
-#define TX_BASE_PTR4 0x0270 //HCCA base address
-#define TX_MAX_CNT4 0x0274
-#define TX_CTX_IDX4 0x0278
-#define TX_DTX_IDX4 0x027c
-#define TX_BASE_PTR5 0x0280 //MGMT base address
-#define TX_MAX_CNT5 0x0284
-#define TX_CTX_IDX5 0x0288
-#define TX_DTX_IDX5 0x028c
-#define TX_MGMTMAX_CNT TX_MAX_CNT5
-#define TX_MGMTCTX_IDX TX_CTX_IDX5
-#define TX_MGMTDTX_IDX TX_DTX_IDX5
-#define RX_BASE_PTR 0x0290 //RX base address
-#define RX_MAX_CNT 0x0294
-#define RX_CRX_IDX 0x0298
-#define RX_DRX_IDX 0x029c
-#define USB_DMA_CFG 0x02a0
-
-typedef union _USB_DMA_CFG_STRUC {
- struct {
- UINT32 RxBulkAggTOut:8; //Rx Bulk Aggregation TimeOut in unit of 33ns
- UINT32 RxBulkAggLmt:8; //Rx Bulk Aggregation Limit in unit of 256 bytes
- UINT32 phyclear:1; //phy watch dog enable. write 1
- UINT32 rsv:2;
- UINT32 TxClear:1; //Clear USB DMA TX path
- UINT32 TxopHalt:1; //Halt TXOP count down when TX buffer is full.
- UINT32 RxBulkAggEn:1; //Enable Rx Bulk Aggregation
- UINT32 RxBulkEn:1; //Enable USB DMA Rx
- UINT32 TxBulkEn:1; //Enable USB DMA Tx
- UINT32 EpoutValid:6; //OUT endpoint data valid
- UINT32 RxBusy:1; //USB DMA RX FSM busy
- UINT32 TxBusy:1; //USB DMA TX FSM busy
- } field;
- UINT32 word;
-} USB_DMA_CFG_STRUC, *PUSB_DMA_CFG_STRUC;
-
-//
-// 3 PBF registers
-//
-//
-// Most are for debug. Driver doesn't touch PBF register.
-#define PBF_SYS_CTRL 0x0400
-#define PBF_CFG 0x0408
-#define PBF_MAX_PCNT 0x040C
-#define PBF_CTRL 0x0410
-#define PBF_INT_STA 0x0414
-#define PBF_INT_ENA 0x0418
-#define TXRXQ_PCNT 0x0438
-#define PBF_DBG 0x043c
-#define PBF_CAP_CTRL 0x0440
-
-#ifdef RT30xx
-// eFuse registers
-#define EFUSE_CTRL 0x0580
-#define EFUSE_DATA0 0x0590
-#define EFUSE_DATA1 0x0594
-#define EFUSE_DATA2 0x0598
-#define EFUSE_DATA3 0x059c
-#define EFUSE_USAGE_MAP_START 0x2d0
-#define EFUSE_USAGE_MAP_END 0x2fc
-#define EFUSE_TAG 0x2fe
-#define EFUSE_USAGE_MAP_SIZE 45
-
-typedef union _EFUSE_CTRL_STRUC {
- struct {
- UINT32 EFSROM_AOUT:6;
- UINT32 EFSROM_MODE:2;
- UINT32 EFSROM_LDO_OFF_TIME:6;
- UINT32 EFSROM_LDO_ON_TIME:2;
- UINT32 EFSROM_AIN:10;
- UINT32 RESERVED:4;
- UINT32 EFSROM_KICK:1;
- UINT32 SEL_EFUSE:1;
- } field;
- UINT32 word;
-} EFUSE_CTRL_STRUC, *PEFUSE_CTRL_STRUC;
-
-#define LDO_CFG0 0x05d4
-#define GPIO_SWITCH 0x05dc
-#endif /* RT30xx */
-
-//
-// 4 MAC registers
-//
-//
-// 4.1 MAC SYSTEM configuration registers (offset:0x1000)
-//
-#define MAC_CSR0 0x1000
-typedef union _ASIC_VER_ID_STRUC {
- struct {
- USHORT ASICRev; // reversion : 0
- USHORT ASICVer; // version : 2860
- } field;
- UINT32 word;
-} ASIC_VER_ID_STRUC, *PASIC_VER_ID_STRUC;
-
-#define MAC_SYS_CTRL 0x1004 //MAC_CSR1
-#define MAC_ADDR_DW0 0x1008 // MAC ADDR DW0
-#define MAC_ADDR_DW1 0x100c // MAC ADDR DW1
-//
-// MAC_CSR2: STA MAC register 0
-//
-typedef union _MAC_DW0_STRUC {
- struct {
- UCHAR Byte0; // MAC address byte 0
- UCHAR Byte1; // MAC address byte 1
- UCHAR Byte2; // MAC address byte 2
- UCHAR Byte3; // MAC address byte 3
- } field;
- UINT32 word;
-} MAC_DW0_STRUC, *PMAC_DW0_STRUC;
-
-//
-// MAC_CSR3: STA MAC register 1
-//
-typedef union _MAC_DW1_STRUC {
- struct {
- UCHAR Byte4; // MAC address byte 4
- UCHAR Byte5; // MAC address byte 5
- UCHAR U2MeMask;
- UCHAR Rsvd1;
- } field;
- UINT32 word;
-} MAC_DW1_STRUC, *PMAC_DW1_STRUC;
-
-#define MAC_BSSID_DW0 0x1010 // MAC BSSID DW0
-#define MAC_BSSID_DW1 0x1014 // MAC BSSID DW1
-
-//
-// MAC_CSR5: BSSID register 1
-//
-typedef union _MAC_CSR5_STRUC {
- struct {
- UCHAR Byte4; // BSSID byte 4
- UCHAR Byte5; // BSSID byte 5
- USHORT BssIdMask:2; // 0: one BSSID, 10: 4 BSSID, 01: 2 BSSID , 11: 8BSSID
- USHORT MBssBcnNum:3;
- USHORT Rsvd:11;
- } field;
- UINT32 word;
-} MAC_CSR5_STRUC, *PMAC_CSR5_STRUC;
-
-#define MAX_LEN_CFG 0x1018 // rt2860b max 16k bytes. bit12:13 Maximum PSDU length (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16
-#define BBP_CSR_CFG 0x101c //
-//
-// BBP_CSR_CFG: BBP serial control register
-//
-typedef union _BBP_CSR_CFG_STRUC {
- struct {
- UINT32 Value:8; // Register value to program into BBP
- UINT32 RegNum:8; // Selected BBP register
- UINT32 fRead:1; // 0: Write BBP, 1: Read BBP
- UINT32 Busy:1; // 1: ASIC is busy execute BBP programming.
- UINT32 BBP_PAR_DUR:1; // 0: 4 MAC clock cycles 1: 8 MAC clock cycles
- UINT32 BBP_RW_MODE:1; // 0: use serial mode 1:parallel
- UINT32 :12;
- } field;
- UINT32 word;
-} BBP_CSR_CFG_STRUC, *PBBP_CSR_CFG_STRUC;
-
-#define RF_CSR_CFG0 0x1020
-//
-// RF_CSR_CFG: RF control register
-//
-typedef union _RF_CSR_CFG0_STRUC {
- struct {
- UINT32 RegIdAndContent:24; // Register value to program into BBP
- UINT32 bitwidth:5; // Selected BBP register
- UINT32 StandbyMode:1; // 0: high when stand by 1: low when standby
- UINT32 Sel:1; // 0:RF_LE0 activate 1:RF_LE1 activate
- UINT32 Busy:1; // 0: idle 1: 8busy
- } field;
- UINT32 word;
-} RF_CSR_CFG0_STRUC, *PRF_CSR_CFG0_STRUC;
-
-#define RF_CSR_CFG1 0x1024
-typedef union _RF_CSR_CFG1_STRUC {
- struct {
- UINT32 RegIdAndContent:24; // Register value to program into BBP
- UINT32 RFGap:5; // Gap between BB_CONTROL_RF and RF_LE. 0: 3 system clock cycle (37.5usec) 1: 5 system clock cycle (62.5usec)
- UINT32 rsv:7; // 0: idle 1: 8busy
- } field;
- UINT32 word;
-} RF_CSR_CFG1_STRUC, *PRF_CSR_CFG1_STRUC;
-
-#define RF_CSR_CFG2 0x1028 //
-typedef union _RF_CSR_CFG2_STRUC {
- struct {
- UINT32 RegIdAndContent:24; // Register value to program into BBP
- UINT32 rsv:8; // 0: idle 1: 8busy
- } field;
- UINT32 word;
-} RF_CSR_CFG2_STRUC, *PRF_CSR_CFG2_STRUC;
-
-#define LED_CFG 0x102c // MAC_CSR14
-typedef union _LED_CFG_STRUC {
- struct {
- UINT32 OnPeriod:8; // blinking on period unit 1ms
- UINT32 OffPeriod:8; // blinking off period unit 1ms
- UINT32 SlowBlinkPeriod:6; // slow blinking period. unit:1ms
- UINT32 rsv:2;
- UINT32 RLedMode:2; // red Led Mode 0: off1: blinking upon TX2: periodic slow blinking3: always on
- UINT32 GLedMode:2; // green Led Mode
- UINT32 YLedMode:2; // yellow Led Mode
- UINT32 LedPolar:1; // Led Polarity. 0: active low1: active high
- UINT32 :1;
- } field;
- UINT32 word;
-} LED_CFG_STRUC, *PLED_CFG_STRUC;
-
-//
-// 4.2 MAC TIMING configuration registers (offset:0x1100)
-//
-#define XIFS_TIME_CFG 0x1100 // MAC_CSR8 MAC_CSR9
-typedef union _IFS_SLOT_CFG_STRUC {
- struct {
- UINT32 CckmSifsTime:8; // unit 1us. Applied after CCK RX/TX
- UINT32 OfdmSifsTime:8; // unit 1us. Applied after OFDM RX/TX
- UINT32 OfdmXifsTime:4; //OFDM SIFS. unit 1us. Applied after OFDM RX when MAC doesn't reference BBP signal BBRXEND
- UINT32 EIFS:9; // unit 1us
- UINT32 BBRxendEnable:1; // reference RXEND signal to begin XIFS defer
- UINT32 rsv:2;
- } field;
- UINT32 word;
-} IFS_SLOT_CFG_STRUC, *PIFS_SLOT_CFG_STRUC;
-
-#define BKOFF_SLOT_CFG 0x1104 // mac_csr9 last 8 bits
-#define NAV_TIME_CFG 0x1108 // NAV (MAC_CSR15)
-#define CH_TIME_CFG 0x110C // Count as channel busy
-#define PBF_LIFE_TIMER 0x1110 //TX/RX MPDU timestamp timer (free run)Unit: 1us
-#define BCN_TIME_CFG 0x1114 // TXRX_CSR9
-
-#define BCN_OFFSET0 0x042C
-#define BCN_OFFSET1 0x0430
-
-//
-// BCN_TIME_CFG : Synchronization control register
-//
-typedef union _BCN_TIME_CFG_STRUC {
- struct {
- UINT32 BeaconInterval:16; // in unit of 1/16 TU
- UINT32 bTsfTicking:1; // Enable TSF auto counting
- UINT32 TsfSyncMode:2; // Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode
- UINT32 bTBTTEnable:1;
- UINT32 bBeaconGen:1; // Enable beacon generator
- UINT32 :3;
- UINT32 TxTimestampCompensate:8;
- } field;
- UINT32 word;
-} BCN_TIME_CFG_STRUC, *PBCN_TIME_CFG_STRUC;
-
-#define TBTT_SYNC_CFG 0x1118 // txrx_csr10
-#define TSF_TIMER_DW0 0x111C // Local TSF timer lsb 32 bits. Read-only
-#define TSF_TIMER_DW1 0x1120 // msb 32 bits. Read-only.
-#define TBTT_TIMER 0x1124 // TImer remains till next TBTT. Read-only. TXRX_CSR14
-#define INT_TIMER_CFG 0x1128 //
-#define INT_TIMER_EN 0x112c // GP-timer and pre-tbtt Int enable
-#define CH_IDLE_STA 0x1130 // channel idle time
-#define CH_BUSY_STA 0x1134 // channle busy time
-//
-// 4.2 MAC POWER configuration registers (offset:0x1200)
-//
-#define MAC_STATUS_CFG 0x1200 // old MAC_CSR12
-#define PWR_PIN_CFG 0x1204 // old MAC_CSR12
-#define AUTO_WAKEUP_CFG 0x1208 // old MAC_CSR10
-//
-// AUTO_WAKEUP_CFG: Manual power control / status register
-//
-typedef union _AUTO_WAKEUP_STRUC {
- struct {
- UINT32 AutoLeadTime:8;
- UINT32 NumofSleepingTbtt:7; // ForceWake has high privilege than PutToSleep when both set
- UINT32 EnableAutoWakeup:1; // 0:sleep, 1:awake
- UINT32 :16;
- } field;
- UINT32 word;
-} AUTO_WAKEUP_STRUC, *PAUTO_WAKEUP_STRUC;
-
-//
-// 4.3 MAC TX configuration registers (offset:0x1300)
-//
-
-#define EDCA_AC0_CFG 0x1300 //AC_TXOP_CSR0 0x3474
-#define EDCA_AC1_CFG 0x1304
-#define EDCA_AC2_CFG 0x1308
-#define EDCA_AC3_CFG 0x130c
-typedef union _EDCA_AC_CFG_STRUC {
- struct {
- UINT32 AcTxop:8; // in unit of 32us
- UINT32 Aifsn:4; // # of slot time
- UINT32 Cwmin:4; //
- UINT32 Cwmax:4; //unit power of 2
- UINT32 :12; //
- } field;
- UINT32 word;
-} EDCA_AC_CFG_STRUC, *PEDCA_AC_CFG_STRUC;
-
-#define EDCA_TID_AC_MAP 0x1310
-#define TX_PWR_CFG_0 0x1314
-#define TX_PWR_CFG_1 0x1318
-#define TX_PWR_CFG_2 0x131C
-#define TX_PWR_CFG_3 0x1320
-#define TX_PWR_CFG_4 0x1324
-#define TX_PIN_CFG 0x1328
-#define TX_BAND_CFG 0x132c // 0x1 use upper 20MHz. 0 juse lower 20MHz
-#define TX_SW_CFG0 0x1330
-#define TX_SW_CFG1 0x1334
-#define TX_SW_CFG2 0x1338
-#define TXOP_THRES_CFG 0x133c
-#define TXOP_CTRL_CFG 0x1340
-#define TX_RTS_CFG 0x1344
-
-typedef union _TX_RTS_CFG_STRUC {
- struct {
- UINT32 AutoRtsRetryLimit:8;
- UINT32 RtsThres:16; // unit:byte
- UINT32 RtsFbkEn:1; // enable rts rate fallback
- UINT32 rsv:7; // 1: HT non-STBC control frame enable
- } field;
- UINT32 word;
-} TX_RTS_CFG_STRUC, *PTX_RTS_CFG_STRUC;
-
-#define TX_TIMEOUT_CFG 0x1348
-typedef union _TX_TIMEOUT_CFG_STRUC {
- struct {
- UINT32 rsv:4;
- UINT32 MpduLifeTime:4; // expiration time = 2^(9+MPDU LIFE TIME) us
- UINT32 RxAckTimeout:8; // unit:slot. Used for TX precedure
- UINT32 TxopTimeout:8; //TXOP timeout value for TXOP truncation. It is recommended that (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT)
- UINT32 rsv2:8; // 1: HT non-STBC control frame enable
- } field;
- UINT32 word;
-} TX_TIMEOUT_CFG_STRUC, *PTX_TIMEOUT_CFG_STRUC;
-
-#define TX_RTY_CFG 0x134c
-typedef union PACKED _TX_RTY_CFG_STRUC {
- struct {
- UINT32 ShortRtyLimit:8; // short retry limit
- UINT32 LongRtyLimit:8; //long retry limit
- UINT32 LongRtyThre:12; // Long retry threshoold
- UINT32 NonAggRtyMode:1; // Non-Aggregate MPDU retry mode. 0:expired by retry limit, 1: expired by mpdu life timer
- UINT32 AggRtyMode:1; // Aggregate MPDU retry mode. 0:expired by retry limit, 1: expired by mpdu life timer
- UINT32 TxautoFBEnable:1; // Tx retry PHY rate auto fallback enable
- UINT32 rsv:1; // 1: HT non-STBC control frame enable
- } field;
- UINT32 word;
-} TX_RTY_CFG_STRUC, *PTX_RTY_CFG_STRUC;
-
-#define TX_LINK_CFG 0x1350
-typedef union PACKED _TX_LINK_CFG_STRUC {
- struct PACKED {
- UINT32 RemoteMFBLifeTime:8; //remote MFB life time. unit : 32us
- UINT32 MFBEnable:1; // TX apply remote MFB 1:enable
- UINT32 RemoteUMFSEnable:1; // remote unsolicit MFB enable. 0: not apply remote remote unsolicit (MFS=7)
- UINT32 TxMRQEn:1; // MCS request TX enable
- UINT32 TxRDGEn:1; // RDG TX enable
- UINT32 TxCFAckEn:1; // Piggyback CF-ACK enable
- UINT32 rsv:3; //
- UINT32 RemotMFB:8; // remote MCS feedback
- UINT32 RemotMFS:8; //remote MCS feedback sequence number
- } field;
- UINT32 word;
-} TX_LINK_CFG_STRUC, *PTX_LINK_CFG_STRUC;
-
-#define HT_FBK_CFG0 0x1354
-typedef union PACKED _HT_FBK_CFG0_STRUC {
- struct {
- UINT32 HTMCS0FBK:4;
- UINT32 HTMCS1FBK:4;
- UINT32 HTMCS2FBK:4;
- UINT32 HTMCS3FBK:4;
- UINT32 HTMCS4FBK:4;
- UINT32 HTMCS5FBK:4;
- UINT32 HTMCS6FBK:4;
- UINT32 HTMCS7FBK:4;
- } field;
- UINT32 word;
-} HT_FBK_CFG0_STRUC, *PHT_FBK_CFG0_STRUC;
-
-#define HT_FBK_CFG1 0x1358
-typedef union _HT_FBK_CFG1_STRUC {
- struct {
- UINT32 HTMCS8FBK:4;
- UINT32 HTMCS9FBK:4;
- UINT32 HTMCS10FBK:4;
- UINT32 HTMCS11FBK:4;
- UINT32 HTMCS12FBK:4;
- UINT32 HTMCS13FBK:4;
- UINT32 HTMCS14FBK:4;
- UINT32 HTMCS15FBK:4;
- } field;
- UINT32 word;
-} HT_FBK_CFG1_STRUC, *PHT_FBK_CFG1_STRUC;
-
-#define LG_FBK_CFG0 0x135c
-typedef union _LG_FBK_CFG0_STRUC {
- struct {
- UINT32 OFDMMCS0FBK:4; //initial value is 0
- UINT32 OFDMMCS1FBK:4; //initial value is 0
- UINT32 OFDMMCS2FBK:4; //initial value is 1
- UINT32 OFDMMCS3FBK:4; //initial value is 2
- UINT32 OFDMMCS4FBK:4; //initial value is 3
- UINT32 OFDMMCS5FBK:4; //initial value is 4
- UINT32 OFDMMCS6FBK:4; //initial value is 5
- UINT32 OFDMMCS7FBK:4; //initial value is 6
- } field;
- UINT32 word;
-} LG_FBK_CFG0_STRUC, *PLG_FBK_CFG0_STRUC;
-
-#define LG_FBK_CFG1 0x1360
-typedef union _LG_FBK_CFG1_STRUC {
- struct {
- UINT32 CCKMCS0FBK:4; //initial value is 0
- UINT32 CCKMCS1FBK:4; //initial value is 0
- UINT32 CCKMCS2FBK:4; //initial value is 1
- UINT32 CCKMCS3FBK:4; //initial value is 2
- UINT32 rsv:16;
- } field;
- UINT32 word;
-} LG_FBK_CFG1_STRUC, *PLG_FBK_CFG1_STRUC;
-
-//=======================================================
-//================ Protection Paramater================================
-//=======================================================
-#define CCK_PROT_CFG 0x1364 //CCK Protection
-#define ASIC_SHORTNAV 1
-#define ASIC_LONGNAV 2
-#define ASIC_RTS 1
-#define ASIC_CTS 2
-typedef union _PROT_CFG_STRUC {
- struct {
- UINT32 ProtectRate:16; //Protection control frame rate for CCK TX(RTS/CTS/CFEnd).
- UINT32 ProtectCtrl:2; //Protection control frame type for CCK TX. 1:RTS/CTS, 2:CTS-to-self, 0:None, 3:rsv
- UINT32 ProtectNav:2; //TXOP protection type for CCK TX. 0:None, 1:ShortNAVprotect, 2:LongNAVProtect, 3:rsv
- UINT32 TxopAllowCck:1; //CCK TXOP allowance.0:disallow.
- UINT32 TxopAllowOfdm:1; //CCK TXOP allowance.0:disallow.
- UINT32 TxopAllowMM20:1; //CCK TXOP allowance. 0:disallow.
- UINT32 TxopAllowMM40:1; //CCK TXOP allowance.0:disallow.
- UINT32 TxopAllowGF20:1; //CCK TXOP allowance.0:disallow.
- UINT32 TxopAllowGF40:1; //CCK TXOP allowance.0:disallow.
- UINT32 RTSThEn:1; //RTS threshold enable on CCK TX
- UINT32 rsv:5;
- } field;
- UINT32 word;
-} PROT_CFG_STRUC, *PPROT_CFG_STRUC;
-
-#define OFDM_PROT_CFG 0x1368 //OFDM Protection
-#define MM20_PROT_CFG 0x136C //MM20 Protection
-#define MM40_PROT_CFG 0x1370 //MM40 Protection
-#define GF20_PROT_CFG 0x1374 //GF20 Protection
-#define GF40_PROT_CFG 0x1378 //GR40 Protection
-#define EXP_CTS_TIME 0x137C //
-#define EXP_ACK_TIME 0x1380 //
-
-//
-// 4.4 MAC RX configuration registers (offset:0x1400)
-//
-#define RX_FILTR_CFG 0x1400 //TXRX_CSR0
-#define AUTO_RSP_CFG 0x1404 //TXRX_CSR4
-//
-// TXRX_CSR4: Auto-Responder/
-//
-typedef union _AUTO_RSP_CFG_STRUC {
- struct {
- UINT32 AutoResponderEnable:1;
- UINT32 BACAckPolicyEnable:1; // 0:long, 1:short preamble
- UINT32 CTS40MMode:1; // Response CTS 40MHz duplicate mode
- UINT32 CTS40MRef:1; // Response CTS 40MHz duplicate mode
- UINT32 AutoResponderPreamble:1; // 0:long, 1:short preamble
- UINT32 rsv:1; // Power bit value in conrtrol frame
- UINT32 DualCTSEn:1; // Power bit value in conrtrol frame
- UINT32 AckCtsPsmBit:1; // Power bit value in conrtrol frame
- UINT32 :24;
- } field;
- UINT32 word;
-} AUTO_RSP_CFG_STRUC, *PAUTO_RSP_CFG_STRUC;
-
-#define LEGACY_BASIC_RATE 0x1408 // TXRX_CSR5 0x3054
-#define HT_BASIC_RATE 0x140c
-#define HT_CTRL_CFG 0x1410
-#define SIFS_COST_CFG 0x1414
-#define RX_PARSER_CFG 0x1418 //Set NAV for all received frames
-
-//
-// 4.5 MAC Security configuration (offset:0x1500)
-//
-#define TX_SEC_CNT0 0x1500 //
-#define RX_SEC_CNT0 0x1504 //
-#define CCMP_FC_MUTE 0x1508 //
-//
-// 4.6 HCCA/PSMP (offset:0x1600)
-//
-#define TXOP_HLDR_ADDR0 0x1600
-#define TXOP_HLDR_ADDR1 0x1604
-#define TXOP_HLDR_ET 0x1608
-#define QOS_CFPOLL_RA_DW0 0x160c
-#define QOS_CFPOLL_A1_DW1 0x1610
-#define QOS_CFPOLL_QC 0x1614
-//
-// 4.7 MAC Statistis registers (offset:0x1700)
-//
-#define RX_STA_CNT0 0x1700 //
-#define RX_STA_CNT1 0x1704 //
-#define RX_STA_CNT2 0x1708 //
-
-//
-// RX_STA_CNT0_STRUC: RX PLCP error count & RX CRC error count
-//
-typedef union _RX_STA_CNT0_STRUC {
- struct {
- USHORT CrcErr;
- USHORT PhyErr;
- } field;
- UINT32 word;
-} RX_STA_CNT0_STRUC, *PRX_STA_CNT0_STRUC;
-
-//
-// RX_STA_CNT1_STRUC: RX False CCA count & RX LONG frame count
-//
-typedef union _RX_STA_CNT1_STRUC {
- struct {
- USHORT FalseCca;
- USHORT PlcpErr;
- } field;
- UINT32 word;
-} RX_STA_CNT1_STRUC, *PRX_STA_CNT1_STRUC;
-
-//
-// RX_STA_CNT2_STRUC:
-//
-typedef union _RX_STA_CNT2_STRUC {
- struct {
- USHORT RxDupliCount;
- USHORT RxFifoOverflowCount;
- } field;
- UINT32 word;
-} RX_STA_CNT2_STRUC, *PRX_STA_CNT2_STRUC;
-
-#define TX_STA_CNT0 0x170C //
-//
-// STA_CSR3: TX Beacon count
-//
-typedef union _TX_STA_CNT0_STRUC {
- struct {
- USHORT TxFailCount;
- USHORT TxBeaconCount;
- } field;
- UINT32 word;
-} TX_STA_CNT0_STRUC, *PTX_STA_CNT0_STRUC;
-
-#define TX_STA_CNT1 0x1710 //
-//
-// TX_STA_CNT1: TX tx count
-//
-typedef union _TX_STA_CNT1_STRUC {
- struct {
- USHORT TxSuccess;
- USHORT TxRetransmit;
- } field;
- UINT32 word;
-} TX_STA_CNT1_STRUC, *PTX_STA_CNT1_STRUC;
-
-#define TX_STA_CNT2 0x1714 //
-//
-// TX_STA_CNT2: TX tx count
-//
-typedef union _TX_STA_CNT2_STRUC {
- struct {
- USHORT TxZeroLenCount;
- USHORT TxUnderFlowCount;
- } field;
- UINT32 word;
-} TX_STA_CNT2_STRUC, *PTX_STA_CNT2_STRUC;
-
-#define TX_STA_FIFO 0x1718 //
-//
-// TX_STA_FIFO_STRUC: TX Result for specific PID status fifo register
-//
-typedef union PACKED _TX_STA_FIFO_STRUC {
- struct {
- UINT32 bValid:1; // 1:This register contains a valid TX result
- UINT32 PidType:4;
- UINT32 TxSuccess:1; // Tx No retry success
- UINT32 TxAggre:1; // Tx Retry Success
- UINT32 TxAckRequired:1; // Tx fail
- UINT32 wcid:8; //wireless client index
-// UINT32 SuccessRate:16; //include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16.
- UINT32 SuccessRate:13; //include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16.
- UINT32 TxBF:1;
- UINT32 Reserve:2;
- } field;
- UINT32 word;
-} TX_STA_FIFO_STRUC, *PTX_STA_FIFO_STRUC;
-
-// Debug counter
-#define TX_AGG_CNT 0x171c
-typedef union _TX_AGG_CNT_STRUC {
- struct {
- USHORT NonAggTxCount;
- USHORT AggTxCount;
- } field;
- UINT32 word;
-} TX_AGG_CNT_STRUC, *PTX_AGG_CNT_STRUC;
-
-// Debug counter
-#define TX_AGG_CNT0 0x1720
-typedef union _TX_AGG_CNT0_STRUC {
- struct {
- USHORT AggSize1Count;
- USHORT AggSize2Count;
- } field;
- UINT32 word;
-} TX_AGG_CNT0_STRUC, *PTX_AGG_CNT0_STRUC;
-
-// Debug counter
-#define TX_AGG_CNT1 0x1724
-typedef union _TX_AGG_CNT1_STRUC {
- struct {
- USHORT AggSize3Count;
- USHORT AggSize4Count;
- } field;
- UINT32 word;
-} TX_AGG_CNT1_STRUC, *PTX_AGG_CNT1_STRUC;
-
-#define TX_AGG_CNT2 0x1728
-typedef union _TX_AGG_CNT2_STRUC {
- struct {
- USHORT AggSize5Count;
- USHORT AggSize6Count;
- } field;
- UINT32 word;
-} TX_AGG_CNT2_STRUC, *PTX_AGG_CNT2_STRUC;
-
-// Debug counter
-#define TX_AGG_CNT3 0x172c
-typedef union _TX_AGG_CNT3_STRUC {
- struct {
- USHORT AggSize7Count;
- USHORT AggSize8Count;
- } field;
- UINT32 word;
-} TX_AGG_CNT3_STRUC, *PTX_AGG_CNT3_STRUC;
-
-// Debug counter
-#define TX_AGG_CNT4 0x1730
-typedef union _TX_AGG_CNT4_STRUC {
- struct {
- USHORT AggSize9Count;
- USHORT AggSize10Count;
- } field;
- UINT32 word;
-} TX_AGG_CNT4_STRUC, *PTX_AGG_CNT4_STRUC;
-
-#define TX_AGG_CNT5 0x1734
-typedef union _TX_AGG_CNT5_STRUC {
- struct {
- USHORT AggSize11Count;
- USHORT AggSize12Count;
- } field;
- UINT32 word;
-} TX_AGG_CNT5_STRUC, *PTX_AGG_CNT5_STRUC;
-
-#define TX_AGG_CNT6 0x1738
-typedef union _TX_AGG_CNT6_STRUC {
- struct {
- USHORT AggSize13Count;
- USHORT AggSize14Count;
- } field;
- UINT32 word;
-} TX_AGG_CNT6_STRUC, *PTX_AGG_CNT6_STRUC;
-
-#define TX_AGG_CNT7 0x173c
-typedef union _TX_AGG_CNT7_STRUC {
- struct {
- USHORT AggSize15Count;
- USHORT AggSize16Count;
- } field;
- UINT32 word;
-} TX_AGG_CNT7_STRUC, *PTX_AGG_CNT7_STRUC;
-
-#define MPDU_DENSITY_CNT 0x1740
-typedef union _MPDU_DEN_CNT_STRUC {
- struct {
- USHORT TXZeroDelCount; //TX zero length delimiter count
- USHORT RXZeroDelCount; //RX zero length delimiter count
- } field;
- UINT32 word;
-} MPDU_DEN_CNT_STRUC, *PMPDU_DEN_CNT_STRUC;
-
-//
-// TXRX control registers - base address 0x3000
-//
-// rt2860b UNKNOWN reg use R/O Reg Addr 0x77d0 first..
-#define TXRX_CSR1 0x77d0
-
-//
-// Security key table memory, base address = 0x1000
-//
-#define MAC_WCID_BASE 0x1800 //8-bytes(use only 6-bytes) * 256 entry =
-#define HW_WCID_ENTRY_SIZE 8
-#define PAIRWISE_KEY_TABLE_BASE 0x4000 // 32-byte * 256-entry = -byte
-#define HW_KEY_ENTRY_SIZE 0x20
-#define PAIRWISE_IVEIV_TABLE_BASE 0x6000 // 8-byte * 256-entry = -byte
-#define MAC_IVEIV_TABLE_BASE 0x6000 // 8-byte * 256-entry = -byte
-#define HW_IVEIV_ENTRY_SIZE 8
-#define MAC_WCID_ATTRIBUTE_BASE 0x6800 // 4-byte * 256-entry = -byte
-#define HW_WCID_ATTRI_SIZE 4
-#define WCID_RESERVED 0x6bfc
-#define SHARED_KEY_TABLE_BASE 0x6c00 // 32-byte * 16-entry = 512-byte
-#define SHARED_KEY_MODE_BASE 0x7000 // 32-byte * 16-entry = 512-byte
-#define HW_SHARED_KEY_MODE_SIZE 4
-#define SHAREDKEYTABLE 0
-#define PAIRWISEKEYTABLE 1
-
-typedef union _SHAREDKEY_MODE_STRUC {
- struct {
- UINT32 Bss0Key0CipherAlg:3;
- UINT32 :1;
- UINT32 Bss0Key1CipherAlg:3;
- UINT32 :1;
- UINT32 Bss0Key2CipherAlg:3;
- UINT32 :1;
- UINT32 Bss0Key3CipherAlg:3;
- UINT32 :1;
- UINT32 Bss1Key0CipherAlg:3;
- UINT32 :1;
- UINT32 Bss1Key1CipherAlg:3;
- UINT32 :1;
- UINT32 Bss1Key2CipherAlg:3;
- UINT32 :1;
- UINT32 Bss1Key3CipherAlg:3;
- UINT32 :1;
- } field;
- UINT32 word;
-} SHAREDKEY_MODE_STRUC, *PSHAREDKEY_MODE_STRUC;
-
-// 64-entry for pairwise key table
-typedef struct _HW_WCID_ENTRY { // 8-byte per entry
- UCHAR Address[6];
- UCHAR Rsv[2];
-} HW_WCID_ENTRY, PHW_WCID_ENTRY;
-
-
-
-//
-// Other on-chip shared memory space, base = 0x2000
-//
-
-// CIS space - base address = 0x2000
-#define HW_CIS_BASE 0x2000
-
-// Carrier-sense CTS frame base address. It's where mac stores carrier-sense frame for carrier-sense function.
-#define HW_CS_CTS_BASE 0x7700
-// DFS CTS frame base address. It's where mac stores CTS frame for DFS.
-#define HW_DFS_CTS_BASE 0x7780
-#define HW_CTS_FRAME_SIZE 0x80
-
-// 2004-11-08 john - since NULL frame won't be that long (256 byte). We steal 16 tail bytes
-// to save debugging settings
-#define HW_DEBUG_SETTING_BASE 0x77f0 // 0x77f0~0x77ff total 16 bytes
-#define HW_DEBUG_SETTING_BASE2 0x7770 // 0x77f0~0x77ff total 16 bytes
-
-// In order to support maximum 8 MBSS and its maximum length is 512 for each beacon
-// Three section discontinue memory segments will be used.
-// 1. The original region for BCN 0~3
-// 2. Extract memory from FCE table for BCN 4~5
-// 3. Extract memory from Pair-wise key table for BCN 6~7
-// It occupied those memory of wcid 238~253 for BCN 6
-// and wcid 222~237 for BCN 7
-#define HW_BEACON_MAX_SIZE 0x1000 /* unit: byte */
-#define HW_BEACON_BASE0 0x7800
-#define HW_BEACON_BASE1 0x7A00
-#define HW_BEACON_BASE2 0x7C00
-#define HW_BEACON_BASE3 0x7E00
-#define HW_BEACON_BASE4 0x7200
-#define HW_BEACON_BASE5 0x7400
-#define HW_BEACON_BASE6 0x5DC0
-#define HW_BEACON_BASE7 0x5BC0
-
-#define HW_BEACON_MAX_COUNT 8
-#define HW_BEACON_OFFSET 0x0200
-#define HW_BEACON_CONTENT_LEN (HW_BEACON_OFFSET - TXWI_SIZE)
-
-// HOST-MCU shared memory - base address = 0x2100
-#define HOST_CMD_CSR 0x404
-#define H2M_MAILBOX_CSR 0x7010
-#define H2M_MAILBOX_CID 0x7014
-#define H2M_MAILBOX_STATUS 0x701c
-#define H2M_INT_SRC 0x7024
-#define H2M_BBP_AGENT 0x7028
-#define M2H_CMD_DONE_CSR 0x000c
-#define MCU_TXOP_ARRAY_BASE 0x000c // TODO: to be provided by Albert
-#define MCU_TXOP_ENTRY_SIZE 32 // TODO: to be provided by Albert
-#define MAX_NUM_OF_TXOP_ENTRY 16 // TODO: must be same with 8051 firmware
-#define MCU_MBOX_VERSION 0x01 // TODO: to be confirmed by Albert
-#define MCU_MBOX_VERSION_OFFSET 5 // TODO: to be provided by Albert
-
-//
-// Host DMA registers - base address 0x200 . TX0-3=EDCAQid0-3, TX4=HCCA, TX5=MGMT,
-//
-//
-// DMA RING DESCRIPTOR
-//
-#define E2PROM_CSR 0x0004
-#define IO_CNTL_CSR 0x77d0
-
-#ifdef RT2870
-// 8051 firmware image for usb - use last-half base address = 0x3000
-#define FIRMWARE_IMAGE_BASE 0x3000
-#define MAX_FIRMWARE_IMAGE_SIZE 0x1000 // 4kbyte
-#endif // RT2870 //
-
-// ================================================================
-// Tx / Rx / Mgmt ring descriptor definition
-// ================================================================
-
-// the following PID values are used to mark outgoing frame type in TXD->PID so that
-// proper TX statistics can be collected based on these categories
-// b3-2 of PID field -
-#define PID_MGMT 0x05
-#define PID_BEACON 0x0c
-#define PID_DATA_NORMALUCAST 0x02
-#define PID_DATA_AMPDU 0x04
-#define PID_DATA_NO_ACK 0x08
-#define PID_DATA_NOT_NORM_ACK 0x03
-
-// value domain of pTxD->HostQId (4-bit: 0~15)
-#define QID_AC_BK 1 // meet ACI definition in 802.11e
-#define QID_AC_BE 0 // meet ACI definition in 802.11e
-#define QID_AC_VI 2
-#define QID_AC_VO 3
-#define QID_HCCA 4
-#define NUM_OF_TX_RING 5
-#define QID_MGMT 13
-#define QID_RX 14
-#define QID_OTHER 15
-
-
-// ------------------------------------------------------
-// BBP & RF definition
-// ------------------------------------------------------
-#define BUSY 1
-#define IDLE 0
-
-#define RF_R00 0
-#define RF_R01 1
-#define RF_R02 2
-#define RF_R03 3
-#define RF_R04 4
-#define RF_R05 5
-#define RF_R06 6
-#define RF_R07 7
-#define RF_R08 8
-#define RF_R09 9
-#define RF_R10 10
-#define RF_R11 11
-#define RF_R12 12
-#define RF_R13 13
-#define RF_R14 14
-#define RF_R15 15
-#define RF_R16 16
-#define RF_R17 17
-#define RF_R18 18
-#define RF_R19 19
-#define RF_R20 20
-#define RF_R21 21
-#define RF_R22 22
-#define RF_R23 23
-#define RF_R24 24
-#define RF_R25 25
-#define RF_R26 26
-#define RF_R27 27
-#define RF_R28 28
-#define RF_R29 29
-#define RF_R30 30
-#define RF_R31 31
-
-#define BBP_R0 0 // version
-#define BBP_R1 1 // TSSI
-#define BBP_R2 2 // TX configure
-#define BBP_R3 3
-#define BBP_R4 4
-#define BBP_R5 5
-#define BBP_R6 6
-#define BBP_R14 14 // RX configure
-#define BBP_R16 16
-#define BBP_R17 17 // RX sensibility
-#define BBP_R18 18
-#define BBP_R21 21
-#define BBP_R22 22
-#define BBP_R24 24
-#define BBP_R25 25
-#ifdef RT30xx
-#define BBP_R31 31
-#endif
-#define BBP_R49 49 //TSSI
-#define BBP_R50 50
-#define BBP_R51 51
-#define BBP_R52 52
-#define BBP_R55 55
-#define BBP_R62 62 // Rx SQ0 Threshold HIGH
-#define BBP_R63 63
-#define BBP_R64 64
-#define BBP_R65 65
-#define BBP_R66 66
-#define BBP_R67 67
-#define BBP_R68 68
-#define BBP_R69 69
-#define BBP_R70 70 // Rx AGC SQ CCK Xcorr threshold
-#define BBP_R73 73
-#define BBP_R75 75
-#define BBP_R77 77
-#ifdef RT30xx
-#define BBP_R79 79
-#define BBP_R80 80
-#endif
-#define BBP_R81 81
-#define BBP_R82 82
-#define BBP_R83 83
-#define BBP_R84 84
-#define BBP_R86 86
-#define BBP_R91 91
-#define BBP_R92 92
-#define BBP_R94 94 // Tx Gain Control
-#define BBP_R103 103
-#define BBP_R105 105
-#define BBP_R113 113
-#define BBP_R114 114
-#define BBP_R115 115
-#define BBP_R116 116
-#define BBP_R117 117
-#define BBP_R118 118
-#define BBP_R119 119
-#define BBP_R120 120
-#define BBP_R121 121
-#define BBP_R122 122
-#define BBP_R123 123
-#ifdef RT30xx
-#define BBP_R138 138 // add by johnli, RF power sequence setup, ADC dynamic on/off control
-#endif // RT30xx //
-
-
-#define BBPR94_DEFAULT 0x06 // Add 1 value will gain 1db
-
-#define RSSI_FOR_VERY_LOW_SENSIBILITY -35
-#define RSSI_FOR_LOW_SENSIBILITY -58
-#define RSSI_FOR_MID_LOW_SENSIBILITY -80
-#define RSSI_FOR_MID_SENSIBILITY -90
-
-//-------------------------------------------------------------------------
-// EEPROM definition
-//-------------------------------------------------------------------------
-#define EEDO 0x08
-#define EEDI 0x04
-#define EECS 0x02
-#define EESK 0x01
-#define EERL 0x80
-
-#define EEPROM_WRITE_OPCODE 0x05
-#define EEPROM_READ_OPCODE 0x06
-#define EEPROM_EWDS_OPCODE 0x10
-#define EEPROM_EWEN_OPCODE 0x13
-
-#define NUM_EEPROM_BBP_PARMS 19 // Include NIC Config 0, 1, CR, TX ALC step, BBPs
-#define NUM_EEPROM_TX_G_PARMS 7
-#define EEPROM_NIC1_OFFSET 0x34 // The address is from NIC config 0, not BBP register ID
-#define EEPROM_NIC2_OFFSET 0x36 // The address is from NIC config 0, not BBP register ID
-#define EEPROM_BBP_BASE_OFFSET 0xf0 // The address is from NIC config 0, not BBP register ID
-#define EEPROM_G_TX_PWR_OFFSET 0x52
-#define EEPROM_G_TX2_PWR_OFFSET 0x60
-#define EEPROM_LED1_OFFSET 0x3c
-#define EEPROM_LED2_OFFSET 0x3e
-#define EEPROM_LED3_OFFSET 0x40
-#define EEPROM_LNA_OFFSET 0x44
-#define EEPROM_RSSI_BG_OFFSET 0x46
-#define EEPROM_RSSI_A_OFFSET 0x4a
-#define EEPROM_DEFINE_MAX_TXPWR 0x4e
-#define EEPROM_TXPOWER_BYRATE_20MHZ_2_4G 0xde // 20MHZ 2.4G tx power.
-#define EEPROM_TXPOWER_BYRATE_40MHZ_2_4G 0xee // 40MHZ 2.4G tx power.
-#define EEPROM_TXPOWER_BYRATE_20MHZ_5G 0xfa // 20MHZ 5G tx power.
-#define EEPROM_TXPOWER_BYRATE_40MHZ_5G 0x10a // 40MHZ 5G tx power.
-#define EEPROM_A_TX_PWR_OFFSET 0x78
-#define EEPROM_A_TX2_PWR_OFFSET 0xa6
-#define EEPROM_VERSION_OFFSET 0x02
-#define EEPROM_FREQ_OFFSET 0x3a
-#define EEPROM_TXPOWER_BYRATE 0xde // 20MHZ power.
-#define EEPROM_TXPOWER_DELTA 0x50 // 20MHZ AND 40 MHZ use different power. This is delta in 40MHZ.
-#define VALID_EEPROM_VERSION 1
-
-// PairKeyMode definition
-#define PKMODE_NONE 0
-#define PKMODE_WEP64 1
-#define PKMODE_WEP128 2
-#define PKMODE_TKIP 3
-#define PKMODE_AES 4
-#define PKMODE_CKIP64 5
-#define PKMODE_CKIP128 6
-#define PKMODE_TKIP_NO_MIC 7 // MIC appended by driver: not a valid value in hardware key table
-
-// =================================================================================
-// WCID format
-// =================================================================================
-//7.1 WCID ENTRY format : 8bytes
-typedef struct _WCID_ENTRY_STRUC {
- UCHAR RXBABitmap7; // bit0 for TID8, bit7 for TID 15
- UCHAR RXBABitmap0; // bit0 for TID0, bit7 for TID 7
- UCHAR MAC[6]; // 0 for shared key table. 1 for pairwise key table
-} WCID_ENTRY_STRUC, *PWCID_ENTRY_STRUC;
-
-//8.1.1 SECURITY KEY format : 8DW
-// 32-byte per entry, total 16-entry for shared key table, 64-entry for pairwise key table
-typedef struct _HW_KEY_ENTRY { // 32-byte per entry
- UCHAR Key[16];
- UCHAR TxMic[8];
- UCHAR RxMic[8];
-} HW_KEY_ENTRY, *PHW_KEY_ENTRY;
-
-//8.1.2 IV/EIV format : 2DW
-
-//8.1.3 RX attribute entry format : 1DW
-typedef struct _MAC_ATTRIBUTE_STRUC {
- UINT32 KeyTab:1; // 0 for shared key table. 1 for pairwise key table
- UINT32 PairKeyMode:3;
- UINT32 BSSIDIdx:3; //multipleBSS index for the WCID
- UINT32 RXWIUDF:3;
- UINT32 rsv:22;
-} MAC_ATTRIBUTE_STRUC, *PMAC_ATTRIBUTE_STRUC;
-
-// =================================================================================
-// TX / RX ring descriptor format
-// =================================================================================
-
-// the first 24-byte in TXD is called TXINFO and will be DMAed to MAC block through TXFIFO.
-// MAC block use this TXINFO to control the transmission behavior of this frame.
-#define FIFO_MGMT 0
-#define FIFO_HCCA 1
-#define FIFO_EDCA 2
-
-//
-// TX descriptor format, Tx ring, Mgmt Ring
-//
-typedef struct PACKED _TXD_STRUC {
- // Word 0
- UINT32 SDPtr0;
- // Word 1
- UINT32 SDLen1:14;
- UINT32 LastSec1:1;
- UINT32 Burst:1;
- UINT32 SDLen0:14;
- UINT32 LastSec0:1;
- UINT32 DMADONE:1;
- //Word2
- UINT32 SDPtr1;
- //Word3
- UINT32 rsv2:24;
- UINT32 WIV:1; // Wireless Info Valid. 1 if Driver already fill WI, o if DMA needs to copy WI to correctposition
- UINT32 QSEL:2; // select on-chip FIFO ID for 2nd-stage output scheduler.0:MGMT, 1:HCCA 2:EDCA
- UINT32 rsv:2;
- UINT32 TCO:1; //
- UINT32 UCO:1; //
- UINT32 ICO:1; //
-} TXD_STRUC, *PTXD_STRUC;
-
-//
-// TXD Wireless Information format for Tx ring and Mgmt Ring
-//
-//txop : for txop mode
-// 0:txop for the MPDU frame will be handles by ASIC by register
-// 1/2/3:the MPDU frame is send after PIFS/backoff/SIFS
-typedef struct PACKED _TXWI_STRUC {
- // Word 0
- UINT32 FRAG:1; // 1 to inform TKIP engine this is a fragment.
- UINT32 MIMOps:1; // the remote peer is in dynamic MIMO-PS mode
- UINT32 CFACK:1;
- UINT32 TS:1;
-
- UINT32 AMPDU:1;
- UINT32 MpduDensity:3;
- UINT32 txop:2; //FOR "THIS" frame. 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs only when previous frame exchange is successful.
- UINT32 rsv:6;
-
- UINT32 MCS:7;
- UINT32 BW:1; //channel bandwidth 20MHz or 40 MHz
- UINT32 ShortGI:1;
- UINT32 STBC:2; // 1: STBC support MCS =0-7, 2,3 : RESERVE
- UINT32 Ifs:1; //
- UINT32 rsv2:1;
- UINT32 TxBF:1; // 3*3
- UINT32 PHYMODE:2;
- // Word 1
- UINT32 ACK:1;
- UINT32 NSEQ:1;
- UINT32 BAWinSize:6;
- UINT32 WirelessCliID:8;
- UINT32 MPDUtotalByteCount:12;
- UINT32 PacketId:4;
- //Word2
- UINT32 IV;
- //Word3
- UINT32 EIV;
-} TXWI_STRUC, *PTXWI_STRUC;
-
-//
-// Rx descriptor format, Rx Ring
-//
-//
-// RXWI wireless information format, in PBF. invisible in driver.
-//
-typedef struct PACKED _RXWI_STRUC {
- // Word 0
- UINT32 WirelessCliID:8;
- UINT32 KeyIndex:2;
- UINT32 BSSID:3;
- UINT32 UDF:3;
- UINT32 MPDUtotalByteCount:12;
- UINT32 TID:4;
- // Word 1
- UINT32 FRAG:4;
- UINT32 SEQUENCE:12;
- UINT32 MCS:7;
- UINT32 BW:1;
- UINT32 ShortGI:1;
- UINT32 STBC:2;
- UINT32 rsv:3;
- UINT32 PHYMODE:2; // 1: this RX frame is unicast to me
- //Word2
- UINT32 RSSI0:8;
- UINT32 RSSI1:8;
- UINT32 RSSI2:8;
- UINT32 rsv1:8;
- //Word3
- UINT32 SNR0:8;
- UINT32 SNR1:8;
- UINT32 rsv2:16;
-} RXWI_STRUC, *PRXWI_STRUC;
-
-// =================================================================================
-// HOST-MCU communication data structure
-// =================================================================================
-
-//
-// H2M_MAILBOX_CSR: Host-to-MCU Mailbox
-//
-typedef union _H2M_MAILBOX_STRUC {
- struct {
- UINT32 LowByte:8;
- UINT32 HighByte:8;
- UINT32 CmdToken:8;
- UINT32 Owner:8;
- } field;
- UINT32 word;
-} H2M_MAILBOX_STRUC, *PH2M_MAILBOX_STRUC;
-
-//
-// M2H_CMD_DONE_CSR: MCU-to-Host command complete indication
-//
-typedef union _M2H_CMD_DONE_STRUC {
- struct {
- UINT32 CmdToken0;
- UINT32 CmdToken1;
- UINT32 CmdToken2;
- UINT32 CmdToken3;
- } field;
- UINT32 word;
-} M2H_CMD_DONE_STRUC, *PM2H_CMD_DONE_STRUC;
-
-//
-// MCU_LEDCS: MCU LED Control Setting.
-//
-typedef union _MCU_LEDCS_STRUC {
- struct {
- UCHAR LedMode:7;
- UCHAR Polarity:1;
- } field;
- UCHAR word;
-} MCU_LEDCS_STRUC, *PMCU_LEDCS_STRUC;
-
-// =================================================================================
-// Register format
-// =================================================================================
-
-
-
-//NAV_TIME_CFG :NAV
-typedef union _NAV_TIME_CFG_STRUC {
- struct {
- UCHAR Sifs; // in unit of 1-us
- UCHAR SlotTime; // in unit of 1-us
- USHORT Eifs:9; // in unit of 1-us
- USHORT ZeroSifs:1; // Applied zero SIFS timer after OFDM RX 0: disable
- USHORT rsv:6;
- } field;
- UINT32 word;
-} NAV_TIME_CFG_STRUC, *PNAV_TIME_CFG_STRUC;
-
-//
-// RX_FILTR_CFG: /RX configuration register
-//
-typedef union _RX_FILTR_CFG_STRUC {
- struct {
- UINT32 DropCRCErr:1; // Drop CRC error
- UINT32 DropPhyErr:1; // Drop physical error
- UINT32 DropNotToMe:1; // Drop not to me unicast frame
- UINT32 DropNotMyBSSID:1; // Drop fram ToDs bit is true
-
- UINT32 DropVerErr:1; // Drop version error frame
- UINT32 DropMcast:1; // Drop multicast frames
- UINT32 DropBcast:1; // Drop broadcast frames
- UINT32 DropDuplicate:1; // Drop duplicate frame
-
- UINT32 DropCFEndAck:1; // Drop Ps-Poll
- UINT32 DropCFEnd:1; // Drop Ps-Poll
- UINT32 DropAck:1; // Drop Ps-Poll
- UINT32 DropCts:1; // Drop Ps-Poll
-
- UINT32 DropRts:1; // Drop Ps-Poll
- UINT32 DropPsPoll:1; // Drop Ps-Poll
- UINT32 DropBA:1; //
- UINT32 DropBAR:1; //
-
- UINT32 DropRsvCntlType:1;
- UINT32 :15;
- } field;
- UINT32 word;
-} RX_FILTR_CFG_STRUC, *PRX_FILTR_CFG_STRUC;
-
-//
-// PHY_CSR4: RF serial control register
-//
-typedef union _PHY_CSR4_STRUC {
- struct {
- UINT32 RFRegValue:24; // Register value (include register id) serial out to RF/IF chip.
- UINT32 NumberOfBits:5; // Number of bits used in RFRegValue (I:20, RFMD:22)
- UINT32 IFSelect:1; // 1: select IF to program, 0: select RF to program
- UINT32 PLL_LD:1; // RF PLL_LD status
- UINT32 Busy:1; // 1: ASIC is busy execute RF programming.
- } field;
- UINT32 word;
-} PHY_CSR4_STRUC, *PPHY_CSR4_STRUC;
-
-//
-// SEC_CSR5: shared key table security mode register
-//
-typedef union _SEC_CSR5_STRUC {
- struct {
- UINT32 Bss2Key0CipherAlg:3;
- UINT32 :1;
- UINT32 Bss2Key1CipherAlg:3;
- UINT32 :1;
- UINT32 Bss2Key2CipherAlg:3;
- UINT32 :1;
- UINT32 Bss2Key3CipherAlg:3;
- UINT32 :1;
- UINT32 Bss3Key0CipherAlg:3;
- UINT32 :1;
- UINT32 Bss3Key1CipherAlg:3;
- UINT32 :1;
- UINT32 Bss3Key2CipherAlg:3;
- UINT32 :1;
- UINT32 Bss3Key3CipherAlg:3;
- UINT32 :1;
- } field;
- UINT32 word;
-} SEC_CSR5_STRUC, *PSEC_CSR5_STRUC;
-
-//
-// HOST_CMD_CSR: For HOST to interrupt embedded processor
-//
-typedef union _HOST_CMD_CSR_STRUC {
- struct {
- UINT32 HostCommand:8;
- UINT32 Rsv:24;
- } field;
- UINT32 word;
-} HOST_CMD_CSR_STRUC, *PHOST_CMD_CSR_STRUC;
-
-//
-// AIFSN_CSR: AIFSN for each EDCA AC
-//
-
-
-
-//
-// E2PROM_CSR: EEPROM control register
-//
-typedef union _E2PROM_CSR_STRUC {
- struct {
- UINT32 Reload:1; // Reload EEPROM content, write one to reload, self-cleared.
- UINT32 EepromSK:1;
- UINT32 EepromCS:1;
- UINT32 EepromDI:1;
- UINT32 EepromDO:1;
- UINT32 Type:1; // 1: 93C46, 0:93C66
- UINT32 LoadStatus:1; // 1:loading, 0:done
- UINT32 Rsvd:25;
- } field;
- UINT32 word;
-} E2PROM_CSR_STRUC, *PE2PROM_CSR_STRUC;
-
-// -------------------------------------------------------------------
-// E2PROM data layout
-// -------------------------------------------------------------------
-
-//
-// EEPROM antenna select format
-//
-typedef union _EEPROM_ANTENNA_STRUC {
- struct {
- USHORT RxPath:4; // 1: 1R, 2: 2R, 3: 3R
- USHORT TxPath:4; // 1: 1T, 2: 2T
- USHORT RfIcType:4; // see E2PROM document
- USHORT Rsv:4;
- } field;
- USHORT word;
-} EEPROM_ANTENNA_STRUC, *PEEPROM_ANTENNA_STRUC;
-
-typedef union _EEPROM_NIC_CINFIG2_STRUC {
- struct {
- USHORT HardwareRadioControl:1; // 1:enable, 0:disable
- USHORT DynamicTxAgcControl:1; //
- USHORT ExternalLNAForG:1; //
- USHORT ExternalLNAForA:1; // external LNA enable for 2.4G
- USHORT CardbusAcceleration:1; // !!! NOTE: 0 - enable, 1 - disable
- USHORT BW40MSidebandForG:1;
- USHORT BW40MSidebandForA:1;
- USHORT EnableWPSPBC:1; // WPS PBC Control bit
- USHORT BW40MAvailForG:1; // 0:enable, 1:disable
- USHORT BW40MAvailForA:1; // 0:enable, 1:disable
-#ifndef RT30xx
- USHORT Rsv2:6; // must be 0
-#endif
-#ifdef RT30xx
- USHORT Rsv1:1; // must be 0
- USHORT AntDiversity:1; // Antenna diversity
- USHORT Rsv2:3; // must be 0
- USHORT DACTestBit:1; // control if driver should patch the DAC issue
-#endif
- } field;
- USHORT word;
-} EEPROM_NIC_CONFIG2_STRUC, *PEEPROM_NIC_CONFIG2_STRUC;
-
-//
-// TX_PWR Value valid range 0xFA(-6) ~ 0x24(36)
-//
-typedef union _EEPROM_TX_PWR_STRUC {
- struct {
- CHAR Byte0; // Low Byte
- CHAR Byte1; // High Byte
- } field;
- USHORT word;
-} EEPROM_TX_PWR_STRUC, *PEEPROM_TX_PWR_STRUC;
-
-typedef union _EEPROM_VERSION_STRUC {
- struct {
- UCHAR FaeReleaseNumber; // Low Byte
- UCHAR Version; // High Byte
- } field;
- USHORT word;
-} EEPROM_VERSION_STRUC, *PEEPROM_VERSION_STRUC;
-
-typedef union _EEPROM_LED_STRUC {
- struct {
- USHORT PolarityRDY_G:1; // Polarity RDY_G setting.
- USHORT PolarityRDY_A:1; // Polarity RDY_A setting.
- USHORT PolarityACT:1; // Polarity ACT setting.
- USHORT PolarityGPIO_0:1; // Polarity GPIO#0 setting.
- USHORT PolarityGPIO_1:1; // Polarity GPIO#1 setting.
- USHORT PolarityGPIO_2:1; // Polarity GPIO#2 setting.
- USHORT PolarityGPIO_3:1; // Polarity GPIO#3 setting.
- USHORT PolarityGPIO_4:1; // Polarity GPIO#4 setting.
- USHORT LedMode:5; // Led mode.
- USHORT Rsvd:3; // Reserved
- } field;
- USHORT word;
-} EEPROM_LED_STRUC, *PEEPROM_LED_STRUC;
-
-typedef union _EEPROM_TXPOWER_DELTA_STRUC {
- struct {
- UCHAR DeltaValue:6; // Tx Power dalta value (MAX=4)
- UCHAR Type:1; // 1: plus the delta value, 0: minus the delta value
- UCHAR TxPowerEnable:1;// Enable
- } field;
- UCHAR value;
-} EEPROM_TXPOWER_DELTA_STRUC, *PEEPROM_TXPOWER_DELTA_STRUC;
-
-//
-// QOS_CSR0: TXOP holder address0 register
-//
-typedef union _QOS_CSR0_STRUC {
- struct {
- UCHAR Byte0; // MAC address byte 0
- UCHAR Byte1; // MAC address byte 1
- UCHAR Byte2; // MAC address byte 2
- UCHAR Byte3; // MAC address byte 3
- } field;
- UINT32 word;
-} QOS_CSR0_STRUC, *PQOS_CSR0_STRUC;
-
-//
-// QOS_CSR1: TXOP holder address1 register
-//
-typedef union _QOS_CSR1_STRUC {
- struct {
- UCHAR Byte4; // MAC address byte 4
- UCHAR Byte5; // MAC address byte 5
- UCHAR Rsvd0;
- UCHAR Rsvd1;
- } field;
- UINT32 word;
-} QOS_CSR1_STRUC, *PQOS_CSR1_STRUC;
-
-#define RF_CSR_CFG 0x500
-typedef union _RF_CSR_CFG_STRUC {
- struct {
- UINT RF_CSR_DATA:8; // DATA
- UINT TESTCSR_RFACC_REGNUM:5; // RF register ID
- UINT Rsvd2:3; // Reserved
- UINT RF_CSR_WR:1; // 0: read 1: write
- UINT RF_CSR_KICK:1; // kick RF register read/write
- UINT Rsvd1:14; // Reserved
- } field;
- UINT word;
-} RF_CSR_CFG_STRUC, *PRF_CSR_CFG_STRUC;
-
-#endif // __RT28XX_H__
+#include "../rt2860/rt28xx.h"
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
-
- Module Name:
- rt_config.h
-
- Abstract:
- Central header file to maintain all include files for all NDIS
- miniport driver routines.
-
- Revision History:
- Who When What
- -------- ---------- ----------------------------------------------
- Paul Lin 08-01-2002 created
-
-*/
-#ifndef __RT_CONFIG_H__
-#define __RT_CONFIG_H__
-
-#include "rtmp_type.h"
-#ifdef LINUX
-#include "rt_linux.h"
-#endif
-#include "rtmp_def.h"
-#include "rt28xx.h"
-
-
-#ifdef RT2870
-#include "rt2870.h"
-#endif // RT2870 //
-
-#include "oid.h"
-#include "mlme.h"
-#include "wpa.h"
-#include "md5.h"
-#include "rtmp.h"
-#include "ap.h"
-#include "dfs.h"
-#include "chlist.h"
-#include "spectrum.h"
-
-
-#ifdef IGMP_SNOOP_SUPPORT
-#include "igmp_snoop.h"
-#endif // IGMP_SNOOP_SUPPORT //
-
-#ifdef IKANOS_VX_1X0
-#include "vr_ikans.h"
-#endif // IKANOS_VX_1X0 //
-
-#endif // __RT_CONFIG_H__
-
+#include "../rt2860/rt_config.h"
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
- */
-
-#include "rt_config.h"
-
-ULONG RTDebugLevel = RT_DEBUG_ERROR;
-
-BUILD_TIMER_FUNCTION(MlmePeriodicExec);
-BUILD_TIMER_FUNCTION(AsicRxAntEvalTimeout);
-BUILD_TIMER_FUNCTION(APSDPeriodicExec);
-BUILD_TIMER_FUNCTION(AsicRfTuningExec);
-#ifdef RT2870
-BUILD_TIMER_FUNCTION(BeaconUpdateExec);
-#endif // RT2870 //
-
-BUILD_TIMER_FUNCTION(BeaconTimeout);
-BUILD_TIMER_FUNCTION(ScanTimeout);
-BUILD_TIMER_FUNCTION(AuthTimeout);
-BUILD_TIMER_FUNCTION(AssocTimeout);
-BUILD_TIMER_FUNCTION(ReassocTimeout);
-BUILD_TIMER_FUNCTION(DisassocTimeout);
-BUILD_TIMER_FUNCTION(LinkDownExec);
-BUILD_TIMER_FUNCTION(StaQuickResponeForRateUpExec);
-BUILD_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc);
-
-// for wireless system event message
-char const *pWirelessSysEventText[IW_SYS_EVENT_TYPE_NUM] = {
- // system status event
- "had associated successfully", /* IW_ASSOC_EVENT_FLAG */
- "had disassociated", /* IW_DISASSOC_EVENT_FLAG */
- "had deauthenticated", /* IW_DEAUTH_EVENT_FLAG */
- "had been aged-out and disassociated", /* IW_AGEOUT_EVENT_FLAG */
- "occurred CounterMeasures attack", /* IW_COUNTER_MEASURES_EVENT_FLAG */
- "occurred replay counter different in Key Handshaking", /* IW_REPLAY_COUNTER_DIFF_EVENT_FLAG */
- "occurred RSNIE different in Key Handshaking", /* IW_RSNIE_DIFF_EVENT_FLAG */
- "occurred MIC different in Key Handshaking", /* IW_MIC_DIFF_EVENT_FLAG */
- "occurred ICV error in RX", /* IW_ICV_ERROR_EVENT_FLAG */
- "occurred MIC error in RX", /* IW_MIC_ERROR_EVENT_FLAG */
- "Group Key Handshaking timeout", /* IW_GROUP_HS_TIMEOUT_EVENT_FLAG */
- "Pairwise Key Handshaking timeout", /* IW_PAIRWISE_HS_TIMEOUT_EVENT_FLAG */
- "RSN IE sanity check failure", /* IW_RSNIE_SANITY_FAIL_EVENT_FLAG */
- "set key done in WPA/WPAPSK", /* IW_SET_KEY_DONE_WPA1_EVENT_FLAG */
- "set key done in WPA2/WPA2PSK", /* IW_SET_KEY_DONE_WPA2_EVENT_FLAG */
- "connects with our wireless client", /* IW_STA_LINKUP_EVENT_FLAG */
- "disconnects with our wireless client", /* IW_STA_LINKDOWN_EVENT_FLAG */
- "scan completed" /* IW_SCAN_COMPLETED_EVENT_FLAG */
- "scan terminate!! Busy!! Enqueue fail!!" /* IW_SCAN_ENQUEUE_FAIL_EVENT_FLAG */
- };
-
-// for wireless IDS_spoof_attack event message
-char const *pWirelessSpoofEventText[IW_SPOOF_EVENT_TYPE_NUM] = {
- "detected conflict SSID", /* IW_CONFLICT_SSID_EVENT_FLAG */
- "detected spoofed association response", /* IW_SPOOF_ASSOC_RESP_EVENT_FLAG */
- "detected spoofed reassociation responses", /* IW_SPOOF_REASSOC_RESP_EVENT_FLAG */
- "detected spoofed probe response", /* IW_SPOOF_PROBE_RESP_EVENT_FLAG */
- "detected spoofed beacon", /* IW_SPOOF_BEACON_EVENT_FLAG */
- "detected spoofed disassociation", /* IW_SPOOF_DISASSOC_EVENT_FLAG */
- "detected spoofed authentication", /* IW_SPOOF_AUTH_EVENT_FLAG */
- "detected spoofed deauthentication", /* IW_SPOOF_DEAUTH_EVENT_FLAG */
- "detected spoofed unknown management frame", /* IW_SPOOF_UNKNOWN_MGMT_EVENT_FLAG */
- "detected replay attack" /* IW_REPLAY_ATTACK_EVENT_FLAG */
- };
-
-// for wireless IDS_flooding_attack event message
-char const *pWirelessFloodEventText[IW_FLOOD_EVENT_TYPE_NUM] = {
- "detected authentication flooding", /* IW_FLOOD_AUTH_EVENT_FLAG */
- "detected association request flooding", /* IW_FLOOD_ASSOC_REQ_EVENT_FLAG */
- "detected reassociation request flooding", /* IW_FLOOD_REASSOC_REQ_EVENT_FLAG */
- "detected probe request flooding", /* IW_FLOOD_PROBE_REQ_EVENT_FLAG */
- "detected disassociation flooding", /* IW_FLOOD_DISASSOC_EVENT_FLAG */
- "detected deauthentication flooding", /* IW_FLOOD_DEAUTH_EVENT_FLAG */
- "detected 802.1x eap-request flooding" /* IW_FLOOD_EAP_REQ_EVENT_FLAG */
- };
-
-/* timeout -- ms */
-VOID RTMP_SetPeriodicTimer(
- IN NDIS_MINIPORT_TIMER *pTimer,
- IN unsigned long timeout)
-{
- timeout = ((timeout*HZ) / 1000);
- pTimer->expires = jiffies + timeout;
- add_timer(pTimer);
-}
-
-/* convert NdisMInitializeTimer --> RTMP_OS_Init_Timer */
-VOID RTMP_OS_Init_Timer(
- IN PRTMP_ADAPTER pAd,
- IN NDIS_MINIPORT_TIMER *pTimer,
- IN TIMER_FUNCTION function,
- IN PVOID data)
-{
- init_timer(pTimer);
- pTimer->data = (unsigned long)data;
- pTimer->function = function;
-}
-
-
-VOID RTMP_OS_Add_Timer(
- IN NDIS_MINIPORT_TIMER *pTimer,
- IN unsigned long timeout)
-{
- if (timer_pending(pTimer))
- return;
-
- timeout = ((timeout*HZ) / 1000);
- pTimer->expires = jiffies + timeout;
- add_timer(pTimer);
-}
-
-VOID RTMP_OS_Mod_Timer(
- IN NDIS_MINIPORT_TIMER *pTimer,
- IN unsigned long timeout)
-{
- timeout = ((timeout*HZ) / 1000);
- mod_timer(pTimer, jiffies + timeout);
-}
-
-VOID RTMP_OS_Del_Timer(
- IN NDIS_MINIPORT_TIMER *pTimer,
- OUT BOOLEAN *pCancelled)
-{
- if (timer_pending(pTimer))
- {
- *pCancelled = del_timer_sync(pTimer);
- }
- else
- {
- *pCancelled = TRUE;
- }
-
-}
-
-VOID RTMP_OS_Release_Packet(
- IN PRTMP_ADAPTER pAd,
- IN PQUEUE_ENTRY pEntry)
-{
- //RTMPFreeNdisPacket(pAd, (struct sk_buff *)pEntry);
-}
-
-// Unify all delay routine by using udelay
-VOID RTMPusecDelay(
- IN ULONG usec)
-{
- ULONG i;
-
- for (i = 0; i < (usec / 50); i++)
- udelay(50);
-
- if (usec % 50)
- udelay(usec % 50);
-}
-
-void RTMP_GetCurrentSystemTime(LARGE_INTEGER *time)
-{
- time->u.LowPart = jiffies;
-}
-
-// pAd MUST allow to be NULL
-NDIS_STATUS os_alloc_mem(
- IN PRTMP_ADAPTER pAd,
- OUT PUCHAR *mem,
- IN ULONG size)
-{
- *mem = (PUCHAR) kmalloc(size, GFP_ATOMIC);
- if (*mem)
- return (NDIS_STATUS_SUCCESS);
- else
- return (NDIS_STATUS_FAILURE);
-}
-
-// pAd MUST allow to be NULL
-NDIS_STATUS os_free_mem(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR mem)
-{
-
- ASSERT(mem);
- kfree(mem);
- return (NDIS_STATUS_SUCCESS);
-}
-
-
-PNDIS_PACKET RTMP_AllocateFragPacketBuffer(
- IN PRTMP_ADAPTER pAd,
- IN ULONG Length)
-{
- struct sk_buff *pkt;
-
- pkt = dev_alloc_skb(Length);
-
- if (pkt == NULL)
- {
- DBGPRINT(RT_DEBUG_ERROR, ("can't allocate frag rx %ld size packet\n",Length));
- }
-
- if (pkt)
- {
- RTMP_SET_PACKET_SOURCE(OSPKT_TO_RTPKT(pkt), PKTSRC_NDIS);
- }
-
- return (PNDIS_PACKET) pkt;
-}
-
-
-PNDIS_PACKET RTMP_AllocateTxPacketBuffer(
- IN PRTMP_ADAPTER pAd,
- IN ULONG Length,
- IN BOOLEAN Cached,
- OUT PVOID *VirtualAddress)
-{
- struct sk_buff *pkt;
-
- pkt = dev_alloc_skb(Length);
-
- if (pkt == NULL)
- {
- DBGPRINT(RT_DEBUG_ERROR, ("can't allocate tx %ld size packet\n",Length));
- }
-
- if (pkt)
- {
- RTMP_SET_PACKET_SOURCE(OSPKT_TO_RTPKT(pkt), PKTSRC_NDIS);
- *VirtualAddress = (PVOID) pkt->data;
- }
- else
- {
- *VirtualAddress = (PVOID) NULL;
- }
-
- return (PNDIS_PACKET) pkt;
-}
-
-
-VOID build_tx_packet(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket,
- IN PUCHAR pFrame,
- IN ULONG FrameLen)
-{
-
- struct sk_buff *pTxPkt;
-
- ASSERT(pPacket);
- pTxPkt = RTPKT_TO_OSPKT(pPacket);
-
- NdisMoveMemory(skb_put(pTxPkt, FrameLen), pFrame, FrameLen);
-}
-
-VOID RTMPFreeAdapter(
- IN PRTMP_ADAPTER pAd)
-{
- POS_COOKIE os_cookie;
- int index;
-
- os_cookie=(POS_COOKIE)pAd->OS_Cookie;
-
- kfree(pAd->BeaconBuf);
-
-
- NdisFreeSpinLock(&pAd->MgmtRingLock);
-
-
- for (index =0 ; index < NUM_OF_TX_RING; index++)
- {
- NdisFreeSpinLock(&pAd->TxSwQueueLock[index]);
- NdisFreeSpinLock(&pAd->DeQueueLock[index]);
- pAd->DeQueueRunning[index] = FALSE;
- }
-
- NdisFreeSpinLock(&pAd->irq_lock);
-
-
- vfree(pAd); // pci_free_consistent(os_cookie->pci_dev,sizeof(RTMP_ADAPTER),pAd,os_cookie->pAd_pa);
- kfree(os_cookie);
-}
-
-BOOLEAN OS_Need_Clone_Packet(void)
-{
- return (FALSE);
-}
-
-
-
-/*
- ========================================================================
-
- Routine Description:
- clone an input NDIS PACKET to another one. The new internally created NDIS PACKET
- must have only one NDIS BUFFER
- return - byte copied. 0 means can't create NDIS PACKET
- NOTE: internally created NDIS_PACKET should be destroyed by RTMPFreeNdisPacket
-
- Arguments:
- pAd Pointer to our adapter
- pInsAMSDUHdr EWC A-MSDU format has extra 14-bytes header. if TRUE, insert this 14-byte hdr in front of MSDU.
- *pSrcTotalLen return total packet length. This lenght is calculated with 802.3 format packet.
-
- Return Value:
- NDIS_STATUS_SUCCESS
- NDIS_STATUS_FAILURE
-
- Note:
-
- ========================================================================
-*/
-NDIS_STATUS RTMPCloneNdisPacket(
- IN PRTMP_ADAPTER pAd,
- IN BOOLEAN pInsAMSDUHdr,
- IN PNDIS_PACKET pInPacket,
- OUT PNDIS_PACKET *ppOutPacket)
-{
-
- struct sk_buff *pkt;
-
- ASSERT(pInPacket);
- ASSERT(ppOutPacket);
-
- // 1. Allocate a packet
- pkt = dev_alloc_skb(2048);
-
- if (pkt == NULL)
- {
- return NDIS_STATUS_FAILURE;
- }
-
- skb_put(pkt, GET_OS_PKT_LEN(pInPacket));
- NdisMoveMemory(pkt->data, GET_OS_PKT_DATAPTR(pInPacket), GET_OS_PKT_LEN(pInPacket));
- *ppOutPacket = OSPKT_TO_RTPKT(pkt);
-
-
- RTMP_SET_PACKET_SOURCE(OSPKT_TO_RTPKT(pkt), PKTSRC_NDIS);
-
- printk("###Clone###\n");
-
- return NDIS_STATUS_SUCCESS;
-}
-
-
-// the allocated NDIS PACKET must be freed via RTMPFreeNdisPacket()
-NDIS_STATUS RTMPAllocateNdisPacket(
- IN PRTMP_ADAPTER pAd,
- OUT PNDIS_PACKET *ppPacket,
- IN PUCHAR pHeader,
- IN UINT HeaderLen,
- IN PUCHAR pData,
- IN UINT DataLen)
-{
- PNDIS_PACKET pPacket;
- ASSERT(pData);
- ASSERT(DataLen);
-
- // 1. Allocate a packet
- pPacket = (PNDIS_PACKET *) dev_alloc_skb(HeaderLen + DataLen + TXPADDING_SIZE);
- if (pPacket == NULL)
- {
- *ppPacket = NULL;
-#ifdef DEBUG
- printk("RTMPAllocateNdisPacket Fail\n\n");
-#endif
- return NDIS_STATUS_FAILURE;
- }
-
- // 2. clone the frame content
- if (HeaderLen > 0)
- NdisMoveMemory(GET_OS_PKT_DATAPTR(pPacket), pHeader, HeaderLen);
- if (DataLen > 0)
- NdisMoveMemory(GET_OS_PKT_DATAPTR(pPacket) + HeaderLen, pData, DataLen);
-
- // 3. update length of packet
- skb_put(GET_OS_PKT_TYPE(pPacket), HeaderLen+DataLen);
-
- RTMP_SET_PACKET_SOURCE(pPacket, PKTSRC_NDIS);
-// printk("%s : pPacket = %p, len = %d\n", __func__, pPacket, GET_OS_PKT_LEN(pPacket));
- *ppPacket = pPacket;
- return NDIS_STATUS_SUCCESS;
-}
-
-/*
- ========================================================================
- Description:
- This routine frees a miniport internally allocated NDIS_PACKET and its
- corresponding NDIS_BUFFER and allocated memory.
- ========================================================================
-*/
-VOID RTMPFreeNdisPacket(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket)
-{
- dev_kfree_skb_any(RTPKT_TO_OSPKT(pPacket));
-}
-
-
-// IRQL = DISPATCH_LEVEL
-// NOTE: we do have an assumption here, that Byte0 and Byte1 always reasid at the same
-// scatter gather buffer
-NDIS_STATUS Sniff2BytesFromNdisBuffer(
- IN PNDIS_BUFFER pFirstBuffer,
- IN UCHAR DesiredOffset,
- OUT PUCHAR pByte0,
- OUT PUCHAR pByte1)
-{
- *pByte0 = *(PUCHAR)(pFirstBuffer + DesiredOffset);
- *pByte1 = *(PUCHAR)(pFirstBuffer + DesiredOffset + 1);
-
- return NDIS_STATUS_SUCCESS;
-}
-
-
-void RTMP_QueryPacketInfo(
- IN PNDIS_PACKET pPacket,
- OUT PACKET_INFO *pPacketInfo,
- OUT PUCHAR *pSrcBufVA,
- OUT UINT *pSrcBufLen)
-{
- pPacketInfo->BufferCount = 1;
- pPacketInfo->pFirstBuffer = GET_OS_PKT_DATAPTR(pPacket);
- pPacketInfo->PhysicalBufferCount = 1;
- pPacketInfo->TotalPacketLength = GET_OS_PKT_LEN(pPacket);
-
- *pSrcBufVA = GET_OS_PKT_DATAPTR(pPacket);
- *pSrcBufLen = GET_OS_PKT_LEN(pPacket);
-}
-
-void RTMP_QueryNextPacketInfo(
- IN PNDIS_PACKET *ppPacket,
- OUT PACKET_INFO *pPacketInfo,
- OUT PUCHAR *pSrcBufVA,
- OUT UINT *pSrcBufLen)
-{
- PNDIS_PACKET pPacket = NULL;
-
- if (*ppPacket)
- pPacket = GET_OS_PKT_NEXT(*ppPacket);
-
- if (pPacket)
- {
- pPacketInfo->BufferCount = 1;
- pPacketInfo->pFirstBuffer = GET_OS_PKT_DATAPTR(pPacket);
- pPacketInfo->PhysicalBufferCount = 1;
- pPacketInfo->TotalPacketLength = GET_OS_PKT_LEN(pPacket);
-
- *pSrcBufVA = GET_OS_PKT_DATAPTR(pPacket);
- *pSrcBufLen = GET_OS_PKT_LEN(pPacket);
- *ppPacket = GET_OS_PKT_NEXT(pPacket);
- }
- else
- {
- pPacketInfo->BufferCount = 0;
- pPacketInfo->pFirstBuffer = NULL;
- pPacketInfo->PhysicalBufferCount = 0;
- pPacketInfo->TotalPacketLength = 0;
-
- *pSrcBufVA = NULL;
- *pSrcBufLen = 0;
- *ppPacket = NULL;
- }
-}
-
-// not yet support MBSS
-PNET_DEV get_netdev_from_bssid(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR FromWhichBSSID)
-{
- PNET_DEV dev_p = NULL;
-
- dev_p = pAd->net_dev;
-
- ASSERT(dev_p);
- return dev_p; /* return one of MBSS */
-}
-
-PNDIS_PACKET DuplicatePacket(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket,
- IN UCHAR FromWhichBSSID)
-{
- struct sk_buff *skb;
- PNDIS_PACKET pRetPacket = NULL;
- USHORT DataSize;
- UCHAR *pData;
-
- DataSize = (USHORT) GET_OS_PKT_LEN(pPacket);
- pData = (PUCHAR) GET_OS_PKT_DATAPTR(pPacket);
-
-
- skb = skb_clone(RTPKT_TO_OSPKT(pPacket), MEM_ALLOC_FLAG);
- if (skb)
- {
- skb->dev = get_netdev_from_bssid(pAd, FromWhichBSSID);
- pRetPacket = OSPKT_TO_RTPKT(skb);
- }
-
- return pRetPacket;
-
-}
-
-PNDIS_PACKET duplicate_pkt(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pHeader802_3,
- IN UINT HdrLen,
- IN PUCHAR pData,
- IN ULONG DataSize,
- IN UCHAR FromWhichBSSID)
-{
- struct sk_buff *skb;
- PNDIS_PACKET pPacket = NULL;
-
-
- if ((skb = __dev_alloc_skb(HdrLen + DataSize + 2, MEM_ALLOC_FLAG)) != NULL)
- {
- skb_reserve(skb, 2);
- NdisMoveMemory(skb->tail, pHeader802_3, HdrLen);
- skb_put(skb, HdrLen);
- NdisMoveMemory(skb->tail, pData, DataSize);
- skb_put(skb, DataSize);
- skb->dev = get_netdev_from_bssid(pAd, FromWhichBSSID);
- pPacket = OSPKT_TO_RTPKT(skb);
- }
-
- return pPacket;
-}
-
-
-#define TKIP_TX_MIC_SIZE 8
-PNDIS_PACKET duplicate_pkt_with_TKIP_MIC(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket)
-{
- struct sk_buff *skb, *newskb;
-
-
- skb = RTPKT_TO_OSPKT(pPacket);
- if (skb_tailroom(skb) < TKIP_TX_MIC_SIZE)
- {
- // alloc a new skb and copy the packet
- newskb = skb_copy_expand(skb, skb_headroom(skb), TKIP_TX_MIC_SIZE, GFP_ATOMIC);
- dev_kfree_skb_any(skb);
- if (newskb == NULL)
- {
- DBGPRINT(RT_DEBUG_ERROR, ("Extend Tx.MIC for packet failed!, dropping packet!\n"));
- return NULL;
- }
- skb = newskb;
- }
-
- return OSPKT_TO_RTPKT(skb);
-}
-
-
-
-
-PNDIS_PACKET ClonePacket(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket,
- IN PUCHAR pData,
- IN ULONG DataSize)
-{
- struct sk_buff *pRxPkt;
- struct sk_buff *pClonedPkt;
-
- ASSERT(pPacket);
- pRxPkt = RTPKT_TO_OSPKT(pPacket);
-
- // clone the packet
- pClonedPkt = skb_clone(pRxPkt, MEM_ALLOC_FLAG);
-
- if (pClonedPkt)
- {
- // set the correct dataptr and data len
- pClonedPkt->dev = pRxPkt->dev;
- pClonedPkt->data = pData;
- pClonedPkt->len = DataSize;
- pClonedPkt->tail = pClonedPkt->data + pClonedPkt->len;
- ASSERT(DataSize < 1530);
- }
- return pClonedPkt;
-}
-
-//
-// change OS packet DataPtr and DataLen
-//
-void update_os_packet_info(
- IN PRTMP_ADAPTER pAd,
- IN RX_BLK *pRxBlk,
- IN UCHAR FromWhichBSSID)
-{
- struct sk_buff *pOSPkt;
-
- ASSERT(pRxBlk->pRxPacket);
- pOSPkt = RTPKT_TO_OSPKT(pRxBlk->pRxPacket);
-
- pOSPkt->dev = get_netdev_from_bssid(pAd, FromWhichBSSID);
- pOSPkt->data = pRxBlk->pData;
- pOSPkt->len = pRxBlk->DataSize;
- pOSPkt->tail = pOSPkt->data + pOSPkt->len;
-}
-
-
-void wlan_802_11_to_802_3_packet(
- IN PRTMP_ADAPTER pAd,
- IN RX_BLK *pRxBlk,
- IN PUCHAR pHeader802_3,
- IN UCHAR FromWhichBSSID)
-{
- struct sk_buff *pOSPkt;
-
- ASSERT(pRxBlk->pRxPacket);
- ASSERT(pHeader802_3);
-
- pOSPkt = RTPKT_TO_OSPKT(pRxBlk->pRxPacket);
-
- pOSPkt->dev = get_netdev_from_bssid(pAd, FromWhichBSSID);
- pOSPkt->data = pRxBlk->pData;
- pOSPkt->len = pRxBlk->DataSize;
- pOSPkt->tail = pOSPkt->data + pOSPkt->len;
-
- //
- // copy 802.3 header
- //
- //
-
- NdisMoveMemory(skb_push(pOSPkt, LENGTH_802_3), pHeader802_3, LENGTH_802_3);
-}
-
-void announce_802_3_packet(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket)
-{
-
- struct sk_buff *pRxPkt;
-
- ASSERT(pPacket);
-
- pRxPkt = RTPKT_TO_OSPKT(pPacket);
-
- /* Push up the protocol stack */
-#ifdef IKANOS_VX_1X0
- IKANOS_DataFrameRx(pAd, pRxPkt->dev, pRxPkt, pRxPkt->len);
-#else
- pRxPkt->protocol = eth_type_trans(pRxPkt, pRxPkt->dev);
-
- netif_rx(pRxPkt);
-#endif // IKANOS_VX_1X0 //
-}
-
-
-PRTMP_SCATTER_GATHER_LIST
-rt_get_sg_list_from_packet(PNDIS_PACKET pPacket, RTMP_SCATTER_GATHER_LIST *sg)
-{
- sg->NumberOfElements = 1;
- sg->Elements[0].Address = GET_OS_PKT_DATAPTR(pPacket);
- sg->Elements[0].Length = GET_OS_PKT_LEN(pPacket);
- return (sg);
-}
-
-void hex_dump(char *str, unsigned char *pSrcBufVA, unsigned int SrcBufLen)
-{
- unsigned char *pt;
- int x;
-
- if (RTDebugLevel < RT_DEBUG_TRACE)
- return;
-
- pt = pSrcBufVA;
- printk("%s: %p, len = %d\n",str, pSrcBufVA, SrcBufLen);
- for (x=0; x<SrcBufLen; x++)
- {
- if (x % 16 == 0)
- printk("0x%04x : ", x);
- printk("%02x ", ((unsigned char)pt[x]));
- if (x%16 == 15) printk("\n");
- }
- printk("\n");
-}
-
-/*
- ========================================================================
-
- Routine Description:
- Send log message through wireless event
-
- Support standard iw_event with IWEVCUSTOM. It is used below.
-
- iwreq_data.data.flags is used to store event_flag that is defined by user.
- iwreq_data.data.length is the length of the event log.
-
- The format of the event log is composed of the entry's MAC address and
- the desired log message (refer to pWirelessEventText).
-
- ex: 11:22:33:44:55:66 has associated successfully
-
- p.s. The requirement of Wireless Extension is v15 or newer.
-
- ========================================================================
-*/
-VOID RTMPSendWirelessEvent(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Event_flag,
- IN PUCHAR pAddr,
- IN UCHAR BssIdx,
- IN CHAR Rssi)
-{
-#if WIRELESS_EXT >= 15
-
- union iwreq_data wrqu;
- PUCHAR pBuf = NULL, pBufPtr = NULL;
- USHORT event, type, BufLen;
- UCHAR event_table_len = 0;
-
- type = Event_flag & 0xFF00;
- event = Event_flag & 0x00FF;
-
- switch (type)
- {
- case IW_SYS_EVENT_FLAG_START:
- event_table_len = IW_SYS_EVENT_TYPE_NUM;
- break;
-
- case IW_SPOOF_EVENT_FLAG_START:
- event_table_len = IW_SPOOF_EVENT_TYPE_NUM;
- break;
-
- case IW_FLOOD_EVENT_FLAG_START:
- event_table_len = IW_FLOOD_EVENT_TYPE_NUM;
- break;
- }
-
- if (event_table_len == 0)
- {
- DBGPRINT(RT_DEBUG_ERROR, ("%s : The type(%0x02x) is not valid.\n", __func__, type));
- return;
- }
-
- if (event >= event_table_len)
- {
- DBGPRINT(RT_DEBUG_ERROR, ("%s : The event(%0x02x) is not valid.\n", __func__, event));
- return;
- }
-
- //Allocate memory and copy the msg.
- if((pBuf = kmalloc(IW_CUSTOM_MAX_LEN, GFP_ATOMIC)) != NULL)
- {
- //Prepare the payload
- memset(pBuf, 0, IW_CUSTOM_MAX_LEN);
-
- pBufPtr = pBuf;
-
- if (pAddr)
- pBufPtr += sprintf(pBufPtr, "(RT2860) STA(%02x:%02x:%02x:%02x:%02x:%02x) ", PRINT_MAC(pAddr));
- else if (BssIdx < MAX_MBSSID_NUM)
- pBufPtr += sprintf(pBufPtr, "(RT2860) BSS(ra%d) ", BssIdx);
- else
- pBufPtr += sprintf(pBufPtr, "(RT2860) ");
-
- if (type == IW_SYS_EVENT_FLAG_START)
- pBufPtr += sprintf(pBufPtr, "%s", pWirelessSysEventText[event]);
- else if (type == IW_SPOOF_EVENT_FLAG_START)
- pBufPtr += sprintf(pBufPtr, "%s (RSSI=%d)", pWirelessSpoofEventText[event], Rssi);
- else if (type == IW_FLOOD_EVENT_FLAG_START)
- pBufPtr += sprintf(pBufPtr, "%s", pWirelessFloodEventText[event]);
- else
- pBufPtr += sprintf(pBufPtr, "%s", "unknown event");
-
- pBufPtr[pBufPtr - pBuf] = '\0';
- BufLen = pBufPtr - pBuf;
-
- memset(&wrqu, 0, sizeof(wrqu));
- wrqu.data.flags = Event_flag;
- wrqu.data.length = BufLen;
-
- //send wireless event
- wireless_send_event(pAd->net_dev, IWEVCUSTOM, &wrqu, pBuf);
-
- //DBGPRINT(RT_DEBUG_TRACE, ("%s : %s\n", __func__, pBuf));
-
- kfree(pBuf);
- }
- else
- DBGPRINT(RT_DEBUG_ERROR, ("%s : Can't allocate memory for wireless event.\n", __func__));
-#else
- DBGPRINT(RT_DEBUG_ERROR, ("%s : The Wireless Extension MUST be v15 or newer.\n", __func__));
-#endif /* WIRELESS_EXT >= 15 */
-}
-
-void send_monitor_packets(
- IN PRTMP_ADAPTER pAd,
- IN RX_BLK *pRxBlk)
-{
- struct sk_buff *pOSPkt;
- wlan_ng_prism2_header *ph;
- int rate_index = 0;
- USHORT header_len = 0;
- UCHAR temp_header[40] = {0};
-
- u_int32_t ralinkrate[256] = {2,4,11,22, 12,18,24,36,48,72,96, 108, 109, 110, 111, 112, 13, 26, 39, 52,78,104, 117, 130, 26, 52, 78,104, 156, 208, 234, 260, 27, 54,81,108,162, 216, 243, 270, // Last 38
- 54, 108, 162, 216, 324, 432, 486, 540, 14, 29, 43, 57, 87, 115, 130, 144, 29, 59,87,115, 173, 230,260, 288, 30, 60,90,120,180,240,270,300,60,120,180,240,360,480,540,600, 0,1,2,3,4,5,6,7,8,9,10,
- 11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80};
-
-
- ASSERT(pRxBlk->pRxPacket);
- if (pRxBlk->DataSize < 10)
- {
- DBGPRINT(RT_DEBUG_ERROR, ("%s : Size is too small! (%d)\n", __func__, pRxBlk->DataSize));
- goto err_free_sk_buff;
- }
-
- if (pRxBlk->DataSize + sizeof(wlan_ng_prism2_header) > RX_BUFFER_AGGRESIZE)
- {
-#ifndef RT30xx
- DBGPRINT(RT_DEBUG_ERROR, ("%s : Size is too large! (%zu)\n", __func__, pRxBlk->DataSize + sizeof(wlan_ng_prism2_header)));
-#endif
-#ifdef RT30xx
- DBGPRINT(RT_DEBUG_ERROR, ("%s : Size is too large! (%d)\n", __func__, pRxBlk->DataSize + sizeof(wlan_ng_prism2_header)));
-#endif
- goto err_free_sk_buff;
- }
-
- pOSPkt = RTPKT_TO_OSPKT(pRxBlk->pRxPacket);
- pOSPkt->dev = get_netdev_from_bssid(pAd, BSS0);
- if (pRxBlk->pHeader->FC.Type == BTYPE_DATA)
- {
- pRxBlk->DataSize -= LENGTH_802_11;
- if ((pRxBlk->pHeader->FC.ToDs == 1) &&
- (pRxBlk->pHeader->FC.FrDs == 1))
- header_len = LENGTH_802_11_WITH_ADDR4;
- else
- header_len = LENGTH_802_11;
-
- // QOS
- if (pRxBlk->pHeader->FC.SubType & 0x08)
- {
- header_len += 2;
- // Data skip QOS contorl field
- pRxBlk->DataSize -=2;
- }
-
- // Order bit: A-Ralink or HTC+
- if (pRxBlk->pHeader->FC.Order)
- {
- header_len += 4;
- // Data skip HTC contorl field
- pRxBlk->DataSize -= 4;
- }
-
- // Copy Header
- if (header_len <= 40)
- NdisMoveMemory(temp_header, pRxBlk->pData, header_len);
-
- // skip HW padding
- if (pRxBlk->RxD.L2PAD)
- pRxBlk->pData += (header_len + 2);
- else
- pRxBlk->pData += header_len;
- } //end if
-
-
- if (pRxBlk->DataSize < pOSPkt->len) {
- skb_trim(pOSPkt,pRxBlk->DataSize);
- } else {
- skb_put(pOSPkt,(pRxBlk->DataSize - pOSPkt->len));
- } //end if
-
- if ((pRxBlk->pData - pOSPkt->data) > 0) {
- skb_put(pOSPkt,(pRxBlk->pData - pOSPkt->data));
- skb_pull(pOSPkt,(pRxBlk->pData - pOSPkt->data));
- } //end if
-
- if (skb_headroom(pOSPkt) < (sizeof(wlan_ng_prism2_header)+ header_len)) {
- if (pskb_expand_head(pOSPkt, (sizeof(wlan_ng_prism2_header) + header_len), 0, GFP_ATOMIC)) {
- DBGPRINT(RT_DEBUG_ERROR, ("%s : Reallocate header size of sk_buff fail!\n", __func__));
- goto err_free_sk_buff;
- } //end if
- } //end if
-
- if (header_len > 0)
- NdisMoveMemory(skb_push(pOSPkt, header_len), temp_header, header_len);
-
- ph = (wlan_ng_prism2_header *) skb_push(pOSPkt, sizeof(wlan_ng_prism2_header));
- NdisZeroMemory(ph, sizeof(wlan_ng_prism2_header));
-
- ph->msgcode = DIDmsg_lnxind_wlansniffrm;
- ph->msglen = sizeof(wlan_ng_prism2_header);
- strcpy(ph->devname, pAd->net_dev->name);
-
- ph->hosttime.did = DIDmsg_lnxind_wlansniffrm_hosttime;
- ph->hosttime.status = 0;
- ph->hosttime.len = 4;
- ph->hosttime.data = jiffies;
-
- ph->mactime.did = DIDmsg_lnxind_wlansniffrm_mactime;
- ph->mactime.status = 0;
- ph->mactime.len = 0;
- ph->mactime.data = 0;
-
- ph->istx.did = DIDmsg_lnxind_wlansniffrm_istx;
- ph->istx.status = 0;
- ph->istx.len = 0;
- ph->istx.data = 0;
-
- ph->channel.did = DIDmsg_lnxind_wlansniffrm_channel;
- ph->channel.status = 0;
- ph->channel.len = 4;
-
- ph->channel.data = (u_int32_t)pAd->CommonCfg.Channel;
-
- ph->rssi.did = DIDmsg_lnxind_wlansniffrm_rssi;
- ph->rssi.status = 0;
- ph->rssi.len = 4;
- ph->rssi.data = (u_int32_t)RTMPMaxRssi(pAd, ConvertToRssi(pAd, pRxBlk->pRxWI->RSSI0, RSSI_0), ConvertToRssi(pAd, pRxBlk->pRxWI->RSSI1, RSSI_1), ConvertToRssi(pAd, pRxBlk->pRxWI->RSSI2, RSSI_2));;
-
- ph->signal.did = DIDmsg_lnxind_wlansniffrm_signal;
- ph->signal.status = 0;
- ph->signal.len = 4;
- ph->signal.data = 0; //rssi + noise;
-
- ph->noise.did = DIDmsg_lnxind_wlansniffrm_noise;
- ph->noise.status = 0;
- ph->noise.len = 4;
- ph->noise.data = 0;
-
- if (pRxBlk->pRxWI->PHYMODE >= MODE_HTMIX)
- {
- rate_index = 16 + ((UCHAR)pRxBlk->pRxWI->BW *16) + ((UCHAR)pRxBlk->pRxWI->ShortGI *32) + ((UCHAR)pRxBlk->pRxWI->MCS);
- }
- else
- if (pRxBlk->pRxWI->PHYMODE == MODE_OFDM)
- rate_index = (UCHAR)(pRxBlk->pRxWI->MCS) + 4;
- else
- rate_index = (UCHAR)(pRxBlk->pRxWI->MCS);
- if (rate_index < 0)
- rate_index = 0;
- if (rate_index > 255)
- rate_index = 255;
-
- ph->rate.did = DIDmsg_lnxind_wlansniffrm_rate;
- ph->rate.status = 0;
- ph->rate.len = 4;
- ph->rate.data = ralinkrate[rate_index];
-
- ph->frmlen.did = DIDmsg_lnxind_wlansniffrm_frmlen;
- ph->frmlen.status = 0;
- ph->frmlen.len = 4;
- ph->frmlen.data = (u_int32_t)pRxBlk->DataSize;
-
-
- pOSPkt->pkt_type = PACKET_OTHERHOST;
- pOSPkt->protocol = eth_type_trans(pOSPkt, pOSPkt->dev);
- pOSPkt->ip_summed = CHECKSUM_NONE;
- netif_rx(pOSPkt);
-
- return;
-
-err_free_sk_buff:
- RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
- return;
-
-}
-
-void rtmp_os_thread_init(PUCHAR pThreadName, PVOID pNotify)
-{
- daemonize(pThreadName /*"%s",pAd->net_dev->name*/);
-
- allow_signal(SIGTERM);
- allow_signal(SIGKILL);
- current->flags |= PF_NOFREEZE;
-
- /* signal that we've started the thread */
- complete(pNotify);
-}
-
-void RTMP_IndicateMediaState(
- IN PRTMP_ADAPTER pAd)
-{
- if (pAd->CommonCfg.bWirelessEvent)
- {
- if (pAd->IndicateMediaState == NdisMediaStateConnected)
- {
- RTMPSendWirelessEvent(pAd, IW_STA_LINKUP_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
- }
- else
- {
- RTMPSendWirelessEvent(pAd, IW_STA_LINKDOWN_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0);
- }
- }
-}
-
+#include "../rt2860/rt_linux.c"
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
- */
-
-/***********************************************************************/
-/* */
-/* Program: rt_linux.c */
-/* Created: 4/21/2006 1:17:38 PM */
-/* Author: Wu Xi-Kun */
-/* Comments: `description` */
-/* */
-/*---------------------------------------------------------------------*/
-/* */
-/* History: */
-/* Revision 1.1 4/21/2006 1:17:38 PM xsikun */
-/* Initial revision */
-/* */
-/***********************************************************************/
-
-#include "rtmp_type.h"
-#include <linux/module.h>
-#include <linux/version.h>
-#include <linux/kernel.h>
-#ifndef RT30xx
-#include <linux/kthread.h>
-#endif
-
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/ethtool.h>
-#include <linux/wireless.h>
-#include <linux/proc_fs.h>
-#include <linux/delay.h>
-#include <linux/if_arp.h>
-#include <linux/ctype.h>
-#include <linux/vmalloc.h>
-
-
-#ifdef RT30xx
-#include <linux/wireless.h>
-#endif
-#include <net/iw_handler.h>
-
-// load firmware
-#define __KERNEL_SYSCALLS__
-#include <linux/unistd.h>
-#include <asm/uaccess.h>
-
-
-#define MEM_ALLOC_FLAG (GFP_ATOMIC) //(GFP_DMA | GFP_ATOMIC)
-
-#ifndef IFNAMSIZ
-#define IFNAMSIZ 16
-#endif
-
-//#define CONFIG_CKIP_SUPPORT
-
-#undef __inline
-#define __inline static inline
-
-typedef int (*HARD_START_XMIT_FUNC)(struct sk_buff *skb, struct net_device *net_dev);
-
-// add by kathy
-
-#ifdef RT2870
-#define STA_PROFILE_PATH "/etc/Wireless/RT2870STA/RT2870STA.dat"
-#define STA_RT2870_IMAGE_FILE_NAME "/etc/Wireless/RT2870STA/rt2870.bin"
-#define STA_NIC_DEVICE_NAME "RT2870STA"
-#ifndef RT30xx
-#define STA_DRIVER_VERSION "1.4.0.0"
-#endif
-#ifdef RT30xx
-#define STA_DRIVER_VERSION "2.0.1.0"
-#endif
-#endif // RT2870 //
-
-#define RTMP_TIME_AFTER(a,b) \
- (typecheck(unsigned long, (unsigned long)a) && \
- typecheck(unsigned long, (unsigned long)b) && \
- ((long)(b) - (long)(a) < 0))
-
-#define RTMP_TIME_AFTER_EQ(a,b) \
- (typecheck(unsigned long, (unsigned long)a) && \
- typecheck(unsigned long, (unsigned long)b) && \
- ((long)(a) - (long)(b) >= 0))
-#define RTMP_TIME_BEFORE(a,b) RTMP_TIME_AFTER_EQ(b,a)
-
-#define RT_MOD_INC_USE_COUNT() \
- if (!try_module_get(THIS_MODULE)) \
- { \
- DBGPRINT(RT_DEBUG_ERROR, ("%s: cannot reserve module\n", __func__)); \
- return -1; \
- }
-
-#define RT_MOD_DEC_USE_COUNT() module_put(THIS_MODULE);
-
-#define OS_HZ HZ
-
-#define ETH_LENGTH_OF_ADDRESS 6
-
-#define IN
-#define OUT
-
-#define NDIS_STATUS INT
-#define NDIS_STATUS_SUCCESS 0x00
-#define NDIS_STATUS_FAILURE 0x01
-#define NDIS_STATUS_INVALID_DATA 0x02
-#define NDIS_STATUS_RESOURCES 0x03
-
-#define MIN_NET_DEVICE_FOR_AID 0x00 //0x00~0x3f
-#define MIN_NET_DEVICE_FOR_MBSSID 0x00 //0x00,0x10,0x20,0x30
-#define MIN_NET_DEVICE_FOR_WDS 0x10 //0x40,0x50,0x60,0x70
-#define MIN_NET_DEVICE_FOR_APCLI 0x20
-#define MIN_NET_DEVICE_FOR_MESH 0x30
-#define MIN_NET_DEVICE_FOR_DLS 0x40
-
-#define NDIS_PACKET_TYPE_DIRECTED 0
-#define NDIS_PACKET_TYPE_MULTICAST 1
-#define NDIS_PACKET_TYPE_BROADCAST 2
-#define NDIS_PACKET_TYPE_ALL_MULTICAST 3
-
-#ifndef RT30xx
-typedef struct pid * THREAD_PID;
-#define GET_PID(_v) find_get_pid(_v)
-#define GET_PID_NUMBER(_v) pid_nr(_v)
-#define CHECK_PID_LEGALITY(_pid) if (pid_nr(_pid) >= 0)
-#define KILL_THREAD_PID(_A, _B, _C) kill_pid(_A, _B, _C)
-#endif
-
-struct os_lock {
- spinlock_t lock;
- unsigned long flags;
-};
-
-
-struct os_cookie {
-
-#ifdef RT2870
- struct usb_device *pUsb_Dev;
-
-#ifndef RT30xx
- struct task_struct *MLMEThr_task;
- struct task_struct *RTUSBCmdThr_task;
- struct task_struct *TimerQThr_task;
-#endif
-#ifdef RT30xx
- struct pid * MLMEThr_pid;
- struct pid * RTUSBCmdThr_pid;
- struct pid * TimerQThr_pid;
-#endif
-#endif // RT2870 //
-
- struct tasklet_struct rx_done_task;
- struct tasklet_struct mgmt_dma_done_task;
- struct tasklet_struct ac0_dma_done_task;
- struct tasklet_struct ac1_dma_done_task;
- struct tasklet_struct ac2_dma_done_task;
- struct tasklet_struct ac3_dma_done_task;
- struct tasklet_struct hcca_dma_done_task;
- struct tasklet_struct tbtt_task;
-#ifdef RT2870
- struct tasklet_struct null_frame_complete_task;
- struct tasklet_struct rts_frame_complete_task;
- struct tasklet_struct pspoll_frame_complete_task;
-#endif // RT2870 //
-
-
- unsigned long apd_pid; //802.1x daemon pid
- INT ioctl_if_type;
- INT ioctl_if;
-};
-
-typedef struct _VIRTUAL_ADAPTER
-{
- struct net_device *RtmpDev;
- struct net_device *VirtualDev;
-} VIRTUAL_ADAPTER, PVIRTUAL_ADAPTER;
-
-#undef ASSERT
-#define ASSERT(x)
-
-typedef struct os_cookie * POS_COOKIE;
-typedef struct pci_dev * PPCI_DEV;
-typedef struct net_device * PNET_DEV;
-typedef void * PNDIS_PACKET;
-typedef char NDIS_PACKET;
-typedef PNDIS_PACKET * PPNDIS_PACKET;
-typedef dma_addr_t NDIS_PHYSICAL_ADDRESS;
-typedef dma_addr_t * PNDIS_PHYSICAL_ADDRESS;
-typedef spinlock_t NDIS_SPIN_LOCK;
-typedef struct timer_list NDIS_MINIPORT_TIMER;
-typedef void * NDIS_HANDLE;
-typedef char * PNDIS_BUFFER;
-
-
-
-void hex_dump(char *str, unsigned char *pSrcBufVA, unsigned int SrcBufLen);
-
-dma_addr_t linux_pci_map_single(void *handle, void *ptr, size_t size, int sd_idx, int direction);
-void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size, int direction);
-
-
-////////////////////////////////////////
-// MOVE TO rtmp.h ?
-/////////////////////////////////////////
-#define PKTSRC_NDIS 0x7f
-#define PKTSRC_DRIVER 0x0f
-#define PRINT_MAC(addr) \
- addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]
-
-
-#define RT2860_PCI_DEVICE_ID 0x0601
-
-
-#ifdef RT2870
-#define PCI_MAP_SINGLE(_handle, _ptr, _size, _dir) (ULONG)0
-
-#define PCI_UNMAP_SINGLE(_handle, _ptr, _size, _dir)
-#endif // RT2870 //
-
-
-#define BEACON_FRAME_DMA_CACHE_WBACK(_ptr, _size) \
- dma_cache_wback(_ptr, _size)
-
-
-//////////////////////////////////////////
-//
-//////////////////////////////////////////
-
-
-#define NdisMIndicateStatus(_w, _x, _y, _z)
-
-typedef struct timer_list RTMP_OS_TIMER;
-
-#ifdef RT2870
-/* ----------------- Timer Related MARCO ---------------*/
-// In RT2870, we have a lot of timer functions and will read/write register, it's
-// not allowed in Linux USB sub-system to do it ( because of sleep issue when submit
-// to ctrl pipe). So we need a wrapper function to take care it.
-
-typedef VOID (*RT2870_TIMER_HANDLE)(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-#endif // RT2870 //
-
-
-typedef struct _RALINK_TIMER_STRUCT {
- RTMP_OS_TIMER TimerObj; // Ndis Timer object
- BOOLEAN Valid; // Set to True when call RTMPInitTimer
- BOOLEAN State; // True if timer cancelled
- BOOLEAN PeriodicType; // True if timer is periodic timer
- BOOLEAN Repeat; // True if periodic timer
- ULONG TimerValue; // Timer value in milliseconds
- ULONG cookie; // os specific object
-#ifdef RT2870
- RT2870_TIMER_HANDLE handle;
- void *pAd;
-#endif // RT2870 //
-} RALINK_TIMER_STRUCT, *PRALINK_TIMER_STRUCT;
-
-
-#ifdef RT2870
-
-typedef enum _RT2870_KERNEL_THREAD_STATUS_
-{
- RT2870_THREAD_UNKNOWN = 0,
- RT2870_THREAD_INITED = 1,
- RT2870_THREAD_RUNNING = 2,
- RT2870_THREAD_STOPED = 4,
-}RT2870_KERNEL_THREAD_STATUS;
-
-#define RT2870_THREAD_CAN_DO_INSERT (RT2870_THREAD_INITED |RT2870_THREAD_RUNNING)
-
-typedef struct _RT2870_TIMER_ENTRY_
-{
- RALINK_TIMER_STRUCT *pRaTimer;
- struct _RT2870_TIMER_ENTRY_ *pNext;
-}RT2870_TIMER_ENTRY;
-
-
-#define TIMER_QUEUE_SIZE_MAX 128
-typedef struct _RT2870_TIMER_QUEUE_
-{
- unsigned int status;
- UCHAR *pTimerQPoll;
- RT2870_TIMER_ENTRY *pQPollFreeList;
- RT2870_TIMER_ENTRY *pQHead;
- RT2870_TIMER_ENTRY *pQTail;
-}RT2870_TIMER_QUEUE;
-#endif // RT2870 //
-
-
-//#define DBG 1
-
-//
-// MACRO for debugging information
-//
-
-#ifdef DBG
-extern ULONG RTDebugLevel;
-
-#define DBGPRINT_RAW(Level, Fmt) \
-{ \
- if (Level <= RTDebugLevel) \
- { \
- printk Fmt; \
- } \
-}
-
-#define DBGPRINT(Level, Fmt) DBGPRINT_RAW(Level, Fmt)
-
-
-#define DBGPRINT_ERR(Fmt) \
-{ \
- printk("ERROR!!! "); \
- printk Fmt; \
-}
-
-#define DBGPRINT_S(Status, Fmt) \
-{ \
- printk Fmt; \
-}
-
-
-#else
-#define DBGPRINT(Level, Fmt)
-#define DBGPRINT_RAW(Level, Fmt)
-#define DBGPRINT_S(Status, Fmt)
-#define DBGPRINT_ERR(Fmt)
-#endif
-
-
-//
-// spin_lock enhanced for Nested spin lock
-//
-#define NdisAllocateSpinLock(__lock) \
-{ \
- spin_lock_init((spinlock_t *)(__lock)); \
-}
-
-#define NdisFreeSpinLock(lock) \
-{ \
-}
-
-
-#define RTMP_SEM_LOCK(__lock) \
-{ \
- spin_lock_bh((spinlock_t *)(__lock)); \
-}
-
-#define RTMP_SEM_UNLOCK(__lock) \
-{ \
- spin_unlock_bh((spinlock_t *)(__lock)); \
-}
-
-// sample, use semaphore lock to replace IRQ lock, 2007/11/15
-#define RTMP_IRQ_LOCK(__lock, __irqflags) \
-{ \
- __irqflags = 0; \
- spin_lock_bh((spinlock_t *)(__lock)); \
- pAd->irq_disabled |= 1; \
-}
-
-#define RTMP_IRQ_UNLOCK(__lock, __irqflag) \
-{ \
- pAd->irq_disabled &= 0; \
- spin_unlock_bh((spinlock_t *)(__lock)); \
-}
-
-#define RTMP_INT_LOCK(__lock, __irqflags) \
-{ \
- spin_lock_irqsave((spinlock_t *)__lock, __irqflags); \
-}
-
-#define RTMP_INT_UNLOCK(__lock, __irqflag) \
-{ \
- spin_unlock_irqrestore((spinlock_t *)(__lock), ((unsigned long)__irqflag)); \
-}
-
-
-
-#ifdef RT2870
-//Patch for ASIC turst read/write bug, needs to remove after metel fix
-#define RTMP_IO_READ32(_A, _R, _pV) \
- RTUSBReadMACRegister(_A, _R, _pV)
-
-#define RTMP_IO_READ8(_A, _R, _pV) \
-{ \
-}
-
-#define RTMP_IO_WRITE32(_A, _R, _V) \
- RTUSBWriteMACRegister(_A, _R, _V)
-
-
-#define RTMP_IO_WRITE8(_A, _R, _V) \
-{ \
- USHORT _Val = _V; \
- RTUSBSingleWrite(_A, _R, _Val); \
-}
-
-
-#define RTMP_IO_WRITE16(_A, _R, _V) \
-{ \
- RTUSBSingleWrite(_A, _R, _V); \
-}
-#endif // RT2870 //
-
-#ifndef wait_event_interruptible_timeout
-#define __wait_event_interruptible_timeout(wq, condition, ret) \
-do { \
- wait_queue_t __wait; \
- init_waitqueue_entry(&__wait, current); \
- add_wait_queue(&wq, &__wait); \
- for (;;) { \
- set_current_state(TASK_INTERRUPTIBLE); \
- if (condition) \
- break; \
- if (!signal_pending(current)) { \
- ret = schedule_timeout(ret); \
- if (!ret) \
- break; \
- continue; \
- } \
- ret = -ERESTARTSYS; \
- break; \
- } \
- current->state = TASK_RUNNING; \
- remove_wait_queue(&wq, &__wait); \
-} while (0)
-
-#define wait_event_interruptible_timeout(wq, condition, timeout) \
-({ \
- long __ret = timeout; \
- if (!(condition)) \
- __wait_event_interruptible_timeout(wq, condition, __ret); \
- __ret; \
-})
-#endif
-#define ONE_TICK 1
-#define OS_WAIT(_time) \
-{ int _i; \
- long _loop = ((_time)/(1000/OS_HZ)) > 0 ? ((_time)/(1000/OS_HZ)) : 1;\
- wait_queue_head_t _wait; \
- init_waitqueue_head(&_wait); \
- for (_i=0; _i<(_loop); _i++) \
- wait_event_interruptible_timeout(_wait, 0, ONE_TICK); }
-
-
-typedef void (*TIMER_FUNCTION)(unsigned long);
-
-#define COPY_MAC_ADDR(Addr1, Addr2) memcpy((Addr1), (Addr2), MAC_ADDR_LEN)
-
-#define MlmeAllocateMemory(_pAd, _ppVA) os_alloc_mem(_pAd, _ppVA, MGMT_DMA_BUFFER_SIZE)
-#define MlmeFreeMemory(_pAd, _pVA) os_free_mem(_pAd, _pVA)
-
-
-#ifdef RT2870
-#define BUILD_TIMER_FUNCTION(_func) \
-void linux_##_func(unsigned long data) \
-{ \
- PRALINK_TIMER_STRUCT _pTimer = (PRALINK_TIMER_STRUCT)data; \
- RT2870_TIMER_ENTRY *_pQNode; \
- RTMP_ADAPTER *_pAd; \
- \
- _pTimer->handle = _func; \
- _pAd = (RTMP_ADAPTER *)_pTimer->pAd; \
- _pQNode = RT2870_TimerQ_Insert(_pAd, _pTimer); \
- if ((_pQNode == NULL) && (_pAd->TimerQ.status & RT2870_THREAD_CAN_DO_INSERT)) \
- RTMP_OS_Add_Timer(&_pTimer->TimerObj, HZ); \
-}
-#endif // RT2870 //
-
-
-#define DECLARE_TIMER_FUNCTION(_func) \
-void linux_##_func(unsigned long data)
-
-#define GET_TIMER_FUNCTION(_func) \
- linux_##_func
-
-DECLARE_TIMER_FUNCTION(MlmePeriodicExec);
-DECLARE_TIMER_FUNCTION(MlmeRssiReportExec);
-DECLARE_TIMER_FUNCTION(AsicRxAntEvalTimeout);
-DECLARE_TIMER_FUNCTION(APSDPeriodicExec);
-DECLARE_TIMER_FUNCTION(AsicRfTuningExec);
-#ifdef RT2870
-DECLARE_TIMER_FUNCTION(BeaconUpdateExec);
-#endif // RT2870 //
-
-DECLARE_TIMER_FUNCTION(BeaconTimeout);
-DECLARE_TIMER_FUNCTION(ScanTimeout);
-DECLARE_TIMER_FUNCTION(AuthTimeout);
-DECLARE_TIMER_FUNCTION(AssocTimeout);
-DECLARE_TIMER_FUNCTION(ReassocTimeout);
-DECLARE_TIMER_FUNCTION(DisassocTimeout);
-DECLARE_TIMER_FUNCTION(LinkDownExec);
-DECLARE_TIMER_FUNCTION(StaQuickResponeForRateUpExec);
-DECLARE_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc);
-DECLARE_TIMER_FUNCTION(PsPollWakeExec);
-DECLARE_TIMER_FUNCTION(RadioOnExec);
-
-void RTMP_GetCurrentSystemTime(LARGE_INTEGER *time);
-
-
-/*
- * packet helper
- * - convert internal rt packet to os packet or
- * os packet to rt packet
- */
-#define RTPKT_TO_OSPKT(_p) ((struct sk_buff *)(_p))
-#define OSPKT_TO_RTPKT(_p) ((PNDIS_PACKET)(_p))
-
-#define GET_OS_PKT_DATAPTR(_pkt) \
- (RTPKT_TO_OSPKT(_pkt)->data)
-
-#define GET_OS_PKT_LEN(_pkt) \
- (RTPKT_TO_OSPKT(_pkt)->len)
-
-#define GET_OS_PKT_DATATAIL(_pkt) \
- (RTPKT_TO_OSPKT(_pkt)->tail)
-
-#define GET_OS_PKT_HEAD(_pkt) \
- (RTPKT_TO_OSPKT(_pkt)->head)
-
-#define GET_OS_PKT_END(_pkt) \
- (RTPKT_TO_OSPKT(_pkt)->end)
-
-#define GET_OS_PKT_NETDEV(_pkt) \
- (RTPKT_TO_OSPKT(_pkt)->dev)
-
-#define GET_OS_PKT_TYPE(_pkt) \
- (RTPKT_TO_OSPKT(_pkt))
-
-#define GET_OS_PKT_NEXT(_pkt) \
- (RTPKT_TO_OSPKT(_pkt)->next)
-
-
-#define OS_NTOHS(_Val) \
- (ntohs(_Val))
-#define OS_HTONS(_Val) \
- (htons(_Val))
-#define OS_NTOHL(_Val) \
- (ntohl(_Val))
-#define OS_HTONL(_Val) \
- (htonl(_Val))
-
-/* statistics counter */
-#define STATS_INC_RX_PACKETS(_pAd, _dev)
-#define STATS_INC_TX_PACKETS(_pAd, _dev)
-
-#define STATS_INC_RX_BYTESS(_pAd, _dev, len)
-#define STATS_INC_TX_BYTESS(_pAd, _dev, len)
-
-#define STATS_INC_RX_ERRORS(_pAd, _dev)
-#define STATS_INC_TX_ERRORS(_pAd, _dev)
-
-#define STATS_INC_RX_DROPPED(_pAd, _dev)
-#define STATS_INC_TX_DROPPED(_pAd, _dev)
-
-
-#define CB_OFF 10
-
-
-// check DDK NDIS_PACKET data structure and find out only MiniportReservedEx[0..7] can be used by our driver without
-// ambiguity. Fields after pPacket->MiniportReservedEx[8] may be used by other wrapper layer thus crashes the driver
-//
-
-// User Priority
-#define RTMP_SET_PACKET_UP(_p, _prio) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+0] = _prio)
-#define RTMP_GET_PACKET_UP(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+0])
-
-// Fragment #
-#define RTMP_SET_PACKET_FRAGMENTS(_p, _num) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+1] = _num)
-#define RTMP_GET_PACKET_FRAGMENTS(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+1])
-
-// 0x0 ~0x7f: TX to AP's own BSS which has the specified AID. if AID>127, set bit 7 in RTMP_SET_PACKET_EMACTAB too.
-//(this value also as MAC(on-chip WCID) table index)
-// 0x80~0xff: TX to a WDS link. b0~6: WDS index
-#define RTMP_SET_PACKET_WCID(_p, _wdsidx) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+2] = _wdsidx)
-#define RTMP_GET_PACKET_WCID(_p) ((UCHAR)(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+2]))
-
-// 0xff: PKTSRC_NDIS, others: local TX buffer index. This value affects how to a packet
-#define RTMP_SET_PACKET_SOURCE(_p, _pktsrc) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+3] = _pktsrc)
-#define RTMP_GET_PACKET_SOURCE(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+3])
-
-// RTS/CTS-to-self protection method
-#define RTMP_SET_PACKET_RTS(_p, _num) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+4] = _num)
-#define RTMP_GET_PACKET_RTS(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+4])
-// see RTMP_S(G)ET_PACKET_EMACTAB
-
-// TX rate index
-#define RTMP_SET_PACKET_TXRATE(_p, _rate) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+5] = _rate)
-#define RTMP_GET_PACKET_TXRATE(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+5])
-
-// From which Interface
-#define RTMP_SET_PACKET_IF(_p, _ifdx) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+6] = _ifdx)
-#define RTMP_GET_PACKET_IF(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+6])
-#define RTMP_SET_PACKET_NET_DEVICE_MBSSID(_p, _bss) RTMP_SET_PACKET_IF((_p), (_bss))
-#define RTMP_SET_PACKET_NET_DEVICE_WDS(_p, _bss) RTMP_SET_PACKET_IF((_p), ((_bss) + MIN_NET_DEVICE_FOR_WDS))
-#define RTMP_SET_PACKET_NET_DEVICE_APCLI(_p, _idx) RTMP_SET_PACKET_IF((_p), ((_idx) + MIN_NET_DEVICE_FOR_APCLI))
-#define RTMP_SET_PACKET_NET_DEVICE_MESH(_p, _idx) RTMP_SET_PACKET_IF((_p), ((_idx) + MIN_NET_DEVICE_FOR_MESH))
-#define RTMP_GET_PACKET_NET_DEVICE_MBSSID(_p) RTMP_GET_PACKET_IF((_p))
-#define RTMP_GET_PACKET_NET_DEVICE(_p) RTMP_GET_PACKET_IF((_p))
-
-#define RTMP_SET_PACKET_MOREDATA(_p, _morebit) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+7] = _morebit)
-#define RTMP_GET_PACKET_MOREDATA(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+7])
-
-
-//
-// Sepcific Pakcet Type definition
-//
-#define RTMP_PACKET_SPECIFIC_CB_OFFSET 11
-
-#define RTMP_PACKET_SPECIFIC_DHCP 0x01
-#define RTMP_PACKET_SPECIFIC_EAPOL 0x02
-#define RTMP_PACKET_SPECIFIC_IPV4 0x04
-#define RTMP_PACKET_SPECIFIC_WAI 0x08
-#define RTMP_PACKET_SPECIFIC_VLAN 0x10
-#define RTMP_PACKET_SPECIFIC_LLCSNAP 0x20
-
-//Specific
-#define RTMP_SET_PACKET_SPECIFIC(_p, _flg) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] = _flg)
-
-//DHCP
-#define RTMP_SET_PACKET_DHCP(_p, _flg) \
- do{ \
- if (_flg) \
- (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) |= (RTMP_PACKET_SPECIFIC_DHCP); \
- else \
- (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) &= (!RTMP_PACKET_SPECIFIC_DHCP); \
- }while(0)
-#define RTMP_GET_PACKET_DHCP(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_DHCP)
-
-//EAPOL
-#define RTMP_SET_PACKET_EAPOL(_p, _flg) \
- do{ \
- if (_flg) \
- (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) |= (RTMP_PACKET_SPECIFIC_EAPOL); \
- else \
- (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) &= (!RTMP_PACKET_SPECIFIC_EAPOL); \
- }while(0)
-#define RTMP_GET_PACKET_EAPOL(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_EAPOL)
-
-//WAI
-#define RTMP_SET_PACKET_WAI(_p, _flg) \
- do{ \
- if (_flg) \
- (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) |= (RTMP_PACKET_SPECIFIC_WAI); \
- else \
- (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) &= (!RTMP_PACKET_SPECIFIC_WAI); \
- }while(0)
-#define RTMP_GET_PACKET_WAI(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_WAI)
-
-#define RTMP_GET_PACKET_LOWRATE(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & (RTMP_PACKET_SPECIFIC_EAPOL | RTMP_PACKET_SPECIFIC_DHCP | RTMP_PACKET_SPECIFIC_WAI))
-
-//VLAN
-#define RTMP_SET_PACKET_VLAN(_p, _flg) \
- do{ \
- if (_flg) \
- (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) |= (RTMP_PACKET_SPECIFIC_VLAN); \
- else \
- (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) &= (!RTMP_PACKET_SPECIFIC_VLAN); \
- }while(0)
-#define RTMP_GET_PACKET_VLAN(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_VLAN)
-
-//LLC/SNAP
-#define RTMP_SET_PACKET_LLCSNAP(_p, _flg) \
- do{ \
- if (_flg) \
- (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) |= (RTMP_PACKET_SPECIFIC_LLCSNAP); \
- else \
- (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) &= (!RTMP_PACKET_SPECIFIC_LLCSNAP); \
- }while(0)
-
-#define RTMP_GET_PACKET_LLCSNAP(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_LLCSNAP)
-
-// IP
-#define RTMP_SET_PACKET_IPV4(_p, _flg) \
- do{ \
- if (_flg) \
- (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) |= (RTMP_PACKET_SPECIFIC_IPV4); \
- else \
- (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11]) &= (!RTMP_PACKET_SPECIFIC_IPV4); \
- }while(0)
-
-#define RTMP_GET_PACKET_IPV4(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_IPV4)
-
-
-// If this flag is set, it indicates that this EAPoL frame MUST be clear.
-#define RTMP_SET_PACKET_CLEAR_EAP_FRAME(_p, _flg) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+12] = _flg)
-#define RTMP_GET_PACKET_CLEAR_EAP_FRAME(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+12])
-
-#define RTMP_SET_PACKET_5VT(_p, _flg) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+22] = _flg)
-#define RTMP_GET_PACKET_5VT(_p) (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+22])
-
-
-#ifdef CONFIG_5VT_ENHANCE
-#define BRIDGE_TAG 0x35564252 // depends on 5VT define in br_input.c
-#endif
-
-
-#define NDIS_SET_PACKET_STATUS(_p, _status)
-
-
-#define GET_SG_LIST_FROM_PACKET(_p, _sc) \
- rt_get_sg_list_from_packet(_p, _sc)
-
-
-#define NdisMoveMemory(Destination, Source, Length) memmove(Destination, Source, Length)
-#define NdisZeroMemory(Destination, Length) memset(Destination, 0, Length)
-#define NdisFillMemory(Destination, Length, Fill) memset(Destination, Fill, Length)
-#define NdisEqualMemory(Source1, Source2, Length) (!memcmp(Source1, Source2, Length))
-#define RTMPEqualMemory(Source1, Source2, Length) (!memcmp(Source1, Source2, Length))
-
-
-#define RTMP_INC_REF(_A) 0
-#define RTMP_DEC_REF(_A) 0
-#define RTMP_GET_REF(_A) 0
-
-
-
-/*
- * ULONG
- * RTMP_GetPhysicalAddressLow(
- * IN NDIS_PHYSICAL_ADDRESS PhysicalAddress);
- */
-#define RTMP_GetPhysicalAddressLow(PhysicalAddress) (PhysicalAddress)
-
-/*
- * ULONG
- * RTMP_GetPhysicalAddressHigh(
- * IN NDIS_PHYSICAL_ADDRESS PhysicalAddress);
- */
-#define RTMP_GetPhysicalAddressHigh(PhysicalAddress) (0)
-
-/*
- * VOID
- * RTMP_SetPhysicalAddressLow(
- * IN NDIS_PHYSICAL_ADDRESS PhysicalAddress,
- * IN ULONG Value);
- */
-#define RTMP_SetPhysicalAddressLow(PhysicalAddress, Value) \
- PhysicalAddress = Value;
-
-/*
- * VOID
- * RTMP_SetPhysicalAddressHigh(
- * IN NDIS_PHYSICAL_ADDRESS PhysicalAddress,
- * IN ULONG Value);
- */
-#define RTMP_SetPhysicalAddressHigh(PhysicalAddress, Value)
-
-
-//CONTAINING_RECORD(pEntry, NDIS_PACKET, MiniportReservedEx);
-#define QUEUE_ENTRY_TO_PACKET(pEntry) \
- (PNDIS_PACKET)(pEntry)
-
-#define PACKET_TO_QUEUE_ENTRY(pPacket) \
- (PQUEUE_ENTRY)(pPacket)
-
-
-#ifndef CONTAINING_RECORD
-#define CONTAINING_RECORD(address, type, field) \
-((type *)((PCHAR)(address) - offsetof(type, field)))
-#endif
-
-
-#define RELEASE_NDIS_PACKET(_pAd, _pPacket, _Status) \
-{ \
- RTMPFreeNdisPacket(_pAd, _pPacket); \
-}
-
-
-#define SWITCH_PhyAB(_pAA, _pBB) \
-{ \
- ULONG AABasePaHigh; \
- ULONG AABasePaLow; \
- ULONG BBBasePaHigh; \
- ULONG BBBasePaLow; \
- BBBasePaHigh = RTMP_GetPhysicalAddressHigh(_pBB); \
- BBBasePaLow = RTMP_GetPhysicalAddressLow(_pBB); \
- AABasePaHigh = RTMP_GetPhysicalAddressHigh(_pAA); \
- AABasePaLow = RTMP_GetPhysicalAddressLow(_pAA); \
- RTMP_SetPhysicalAddressHigh(_pAA, BBBasePaHigh); \
- RTMP_SetPhysicalAddressLow(_pAA, BBBasePaLow); \
- RTMP_SetPhysicalAddressHigh(_pBB, AABasePaHigh); \
- RTMP_SetPhysicalAddressLow(_pBB, AABasePaLow); \
-}
-
-
-#define NdisWriteErrorLogEntry(_a, _b, _c, _d)
-#define NdisMAllocateMapRegisters(_a, _b, _c, _d, _e) NDIS_STATUS_SUCCESS
-
-
-#define NdisAcquireSpinLock RTMP_SEM_LOCK
-#define NdisReleaseSpinLock RTMP_SEM_UNLOCK
-
-static inline void NdisGetSystemUpTime(ULONG *time)
-{
- *time = jiffies;
-}
-
-//pPacket = CONTAINING_RECORD(pEntry, NDIS_PACKET, MiniportReservedEx);
-#define QUEUE_ENTRY_TO_PKT(pEntry) \
- ((PNDIS_PACKET) (pEntry))
-
-int rt28xx_packet_xmit(struct sk_buff *skb);
-
-
-
-void rtmp_os_thread_init(PUCHAR pThreadName, PVOID pNotify);
-
-
+#include "../rt2860/rt_linux.h"
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
-
- Module Name:
- rt_main_dev.c
-
- Abstract:
- Create and register network interface.
-
- Revision History:
- Who When What
- -------- ---------- ----------------------------------------------
- Sample Mar/21/07 Merge RT2870 and RT2860 drivers.
-*/
-
-#include "rt_config.h"
-
-#define FORTY_MHZ_INTOLERANT_INTERVAL (60*1000) // 1 min
-
-/*---------------------------------------------------------------------*/
-/* Private Variables Used */
-/*---------------------------------------------------------------------*/
-//static RALINK_TIMER_STRUCT PeriodicTimer;
-
-char *mac = ""; // default 00:00:00:00:00:00
-char *hostname = "";
-module_param (mac, charp, 0);
-MODULE_PARM_DESC (mac, "rt28xx: wireless mac addr");
-
-
-/*---------------------------------------------------------------------*/
-/* Prototypes of Functions Used */
-/*---------------------------------------------------------------------*/
-extern BOOLEAN ba_reordering_resource_init(PRTMP_ADAPTER pAd, int num);
-extern void ba_reordering_resource_release(PRTMP_ADAPTER pAd);
-extern NDIS_STATUS NICLoadRateSwitchingParams(IN PRTMP_ADAPTER pAd);
-
-
-// public function prototype
-INT __devinit rt28xx_probe(IN void *_dev_p, IN void *_dev_id_p,
- IN UINT argc, OUT PRTMP_ADAPTER *ppAd);
-
-// private function prototype
-static int rt28xx_init(IN struct net_device *net_dev);
-INT rt28xx_send_packets(IN struct sk_buff *skb_p, IN struct net_device *net_dev);
-
-static void CfgInitHook(PRTMP_ADAPTER pAd);
-
-extern const struct iw_handler_def rt28xx_iw_handler_def;
-
-#if WIRELESS_EXT >= 12
-// This function will be called when query /proc
-struct iw_statistics *rt28xx_get_wireless_stats(
- IN struct net_device *net_dev);
-#endif
-
-struct net_device_stats *RT28xx_get_ether_stats(
- IN struct net_device *net_dev);
-
-/*
-========================================================================
-Routine Description:
- Close raxx interface.
-
-Arguments:
- *net_dev the raxx interface pointer
-
-Return Value:
- 0 Open OK
- otherwise Open Fail
-
-Note:
- 1. if open fail, kernel will not call the close function.
- 2. Free memory for
- (1) Mlme Memory Handler: MlmeHalt()
- (2) TX & RX: RTMPFreeTxRxRingMemory()
- (3) BA Reordering: ba_reordering_resource_release()
-========================================================================
-*/
-int MainVirtualIF_close(IN struct net_device *net_dev)
-{
- RTMP_ADAPTER *pAd = net_dev->ml_priv;
-
- // Sanity check for pAd
- if (pAd == NULL)
- return 0; // close ok
-
- netif_carrier_off(pAd->net_dev);
- netif_stop_queue(pAd->net_dev);
-
-
-
- VIRTUAL_IF_DOWN(pAd);
-
- RT_MOD_DEC_USE_COUNT();
-
- return 0; // close ok
-}
-
-/*
-========================================================================
-Routine Description:
- Open raxx interface.
-
-Arguments:
- *net_dev the raxx interface pointer
-
-Return Value:
- 0 Open OK
- otherwise Open Fail
-
-Note:
- 1. if open fail, kernel will not call the close function.
- 2. Free memory for
- (1) Mlme Memory Handler: MlmeHalt()
- (2) TX & RX: RTMPFreeTxRxRingMemory()
- (3) BA Reordering: ba_reordering_resource_release()
-========================================================================
-*/
-int MainVirtualIF_open(IN struct net_device *net_dev)
-{
- RTMP_ADAPTER *pAd = net_dev->ml_priv;
-
- // Sanity check for pAd
- if (pAd == NULL)
- return 0; // close ok
-
- if (VIRTUAL_IF_UP(pAd) != 0)
- return -1;
-
- // increase MODULE use count
- RT_MOD_INC_USE_COUNT();
-
- netif_start_queue(net_dev);
- netif_carrier_on(net_dev);
- netif_wake_queue(net_dev);
-
- return 0;
-}
-
-/*
-========================================================================
-Routine Description:
- Close raxx interface.
-
-Arguments:
- *net_dev the raxx interface pointer
-
-Return Value:
- 0 Open OK
- otherwise Open Fail
-
-Note:
- 1. if open fail, kernel will not call the close function.
- 2. Free memory for
- (1) Mlme Memory Handler: MlmeHalt()
- (2) TX & RX: RTMPFreeTxRxRingMemory()
- (3) BA Reordering: ba_reordering_resource_release()
-========================================================================
-*/
-int rt28xx_close(IN PNET_DEV dev)
-{
- struct net_device * net_dev = (struct net_device *)dev;
- RTMP_ADAPTER *pAd = net_dev->ml_priv;
- BOOLEAN Cancelled = FALSE;
- UINT32 i = 0;
-#ifdef RT2870
- DECLARE_WAIT_QUEUE_HEAD(unlink_wakeup);
- DECLARE_WAITQUEUE(wait, current);
-
- //RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
-#endif // RT2870 //
-
-
- DBGPRINT(RT_DEBUG_TRACE, ("===> rt28xx_close\n"));
-
- // Sanity check for pAd
- if (pAd == NULL)
- return 0; // close ok
-
- {
-
- // If dirver doesn't wake up firmware here,
- // NICLoadFirmware will hang forever when interface is up again.
- if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
- {
- AsicForceWakeup(pAd, TRUE);
- }
-
- if (INFRA_ON(pAd) &&
- (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
- {
- MLME_DISASSOC_REQ_STRUCT DisReq;
- MLME_QUEUE_ELEM *MsgElem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
-
- COPY_MAC_ADDR(DisReq.Addr, pAd->CommonCfg.Bssid);
- DisReq.Reason = REASON_DEAUTH_STA_LEAVING;
-
- MsgElem->Machine = ASSOC_STATE_MACHINE;
- MsgElem->MsgType = MT2_MLME_DISASSOC_REQ;
- MsgElem->MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
- NdisMoveMemory(MsgElem->Msg, &DisReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
-
- // Prevent to connect AP again in STAMlmePeriodicExec
- pAd->MlmeAux.AutoReconnectSsidLen= 32;
- NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
-
- pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
- MlmeDisassocReqAction(pAd, MsgElem);
- kfree(MsgElem);
-
- RTMPusecDelay(1000);
- }
-
-#ifdef RT2870
- RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
-#endif // RT2870 //
-
-#ifdef CCX_SUPPORT
- RTMPCancelTimer(&pAd->StaCfg.LeapAuthTimer, &Cancelled);
-#endif
-
- RTMPCancelTimer(&pAd->StaCfg.StaQuickResponeForRateUpTimer, &Cancelled);
- RTMPCancelTimer(&pAd->StaCfg.WpaDisassocAndBlockAssocTimer, &Cancelled);
-
- MlmeRadioOff(pAd);
- }
-
- RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
-
- for (i = 0 ; i < NUM_OF_TX_RING; i++)
- {
- while (pAd->DeQueueRunning[i] == TRUE)
- {
- printk("Waiting for TxQueue[%d] done..........\n", i);
- RTMPusecDelay(1000);
- }
- }
-
-#ifdef RT2870
- // ensure there are no more active urbs.
- add_wait_queue (&unlink_wakeup, &wait);
- pAd->wait = &unlink_wakeup;
-
- // maybe wait for deletions to finish.
- i = 0;
- //while((i < 25) && atomic_read(&pAd->PendingRx) > 0)
- while(i < 25)
- {
- unsigned long IrqFlags;
-
- RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);
- if (pAd->PendingRx == 0)
- {
- RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
- break;
- }
- RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
-
- msleep(UNLINK_TIMEOUT_MS); //Time in millisecond
- i++;
- }
- pAd->wait = NULL;
- remove_wait_queue (&unlink_wakeup, &wait);
-#endif // RT2870 //
-
-#ifdef RT2870
- // We need clear timerQ related structure before exits of the timer thread.
- RT2870_TimerQ_Exit(pAd);
- // Close kernel threads or tasklets
- RT28xxThreadTerminate(pAd);
-#endif // RT2870 //
-
- // Stop Mlme state machine
- MlmeHalt(pAd);
-
- // Close kernel threads or tasklets
- kill_thread_task(pAd);
-
- MacTableReset(pAd);
-
- MeasureReqTabExit(pAd);
- TpcReqTabExit(pAd);
-
-
-
-
- // Free Ring or USB buffers
- RTMPFreeTxRxRingMemory(pAd);
-
- RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
-
- // Free BA reorder resource
- ba_reordering_resource_release(pAd);
-
- RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_START_UP);
-
- return 0; // close ok
-} /* End of rt28xx_close */
-
-static int rt28xx_init(IN struct net_device *net_dev)
-{
- PRTMP_ADAPTER pAd = net_dev->ml_priv;
- UINT index;
- UCHAR TmpPhy;
- NDIS_STATUS Status;
- UINT32 MacCsr0 = 0;
-
- // Allocate BA Reordering memory
- ba_reordering_resource_init(pAd, MAX_REORDERING_MPDU_NUM);
-
- // Make sure MAC gets ready.
- index = 0;
- do
- {
- RTMP_IO_READ32(pAd, MAC_CSR0, &MacCsr0);
- pAd->MACVersion = MacCsr0;
-
- if ((pAd->MACVersion != 0x00) && (pAd->MACVersion != 0xFFFFFFFF))
- break;
-
- RTMPusecDelay(10);
- } while (index++ < 100);
-
- DBGPRINT(RT_DEBUG_TRACE, ("MAC_CSR0 [ Ver:Rev=0x%08x]\n", pAd->MACVersion));
-/*Iverson patch PCIE L1 issue */
-
- // Disable DMA
- RT28XXDMADisable(pAd);
-
-
- // Load 8051 firmware
- Status = NICLoadFirmware(pAd);
- if (Status != NDIS_STATUS_SUCCESS)
- {
- DBGPRINT_ERR(("NICLoadFirmware failed, Status[=0x%08x]\n", Status));
- goto err1;
- }
-
- NICLoadRateSwitchingParams(pAd);
-
- // Disable interrupts here which is as soon as possible
- // This statement should never be true. We might consider to remove it later
-
- Status = RTMPAllocTxRxRingMemory(pAd);
- if (Status != NDIS_STATUS_SUCCESS)
- {
- DBGPRINT_ERR(("RTMPAllocDMAMemory failed, Status[=0x%08x]\n", Status));
- goto err1;
- }
-
- RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
-
- // initialize MLME
- //
-
- Status = MlmeInit(pAd);
- if (Status != NDIS_STATUS_SUCCESS)
- {
- DBGPRINT_ERR(("MlmeInit failed, Status[=0x%08x]\n", Status));
- goto err2;
- }
-
- // Initialize pAd->StaCfg, pAd->ApCfg, pAd->CommonCfg to manufacture default
- //
- UserCfgInit(pAd);
-
-#ifdef RT2870
- // We need init timerQ related structure before create the timer thread.
- RT2870_TimerQ_Init(pAd);
-#endif // RT2870 //
-
- RT28XX_TASK_THREAD_INIT(pAd, Status);
- if (Status != NDIS_STATUS_SUCCESS)
- goto err1;
-
- CfgInitHook(pAd);
-
- NdisAllocateSpinLock(&pAd->MacTabLock);
-
- MeasureReqTabInit(pAd);
- TpcReqTabInit(pAd);
-
- //
- // Init the hardware, we need to init asic before read registry, otherwise mac register will be reset
- //
- Status = NICInitializeAdapter(pAd, TRUE);
- if (Status != NDIS_STATUS_SUCCESS)
- {
- DBGPRINT_ERR(("NICInitializeAdapter failed, Status[=0x%08x]\n", Status));
- if (Status != NDIS_STATUS_SUCCESS)
- goto err3;
- }
-
- // Read parameters from Config File
- Status = RTMPReadParametersHook(pAd);
-
- printk("1. Phy Mode = %d\n", pAd->CommonCfg.PhyMode);
- if (Status != NDIS_STATUS_SUCCESS)
- {
- DBGPRINT_ERR(("NICReadRegParameters failed, Status[=0x%08x]\n",Status));
- goto err4;
- }
-
-#ifdef RT2870
- pAd->CommonCfg.bMultipleIRP = FALSE;
-
- if (pAd->CommonCfg.bMultipleIRP)
- pAd->CommonCfg.NumOfBulkInIRP = RX_RING_SIZE;
- else
- pAd->CommonCfg.NumOfBulkInIRP = 1;
-#endif // RT2870 //
-
-
- //Init Ba Capability parameters.
- pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
- pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable;
- pAd->CommonCfg.DesiredHtPhy.AmsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
- pAd->CommonCfg.DesiredHtPhy.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
- // UPdata to HT IE
- pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
- pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
- pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
-
- printk("2. Phy Mode = %d\n", pAd->CommonCfg.PhyMode);
-
- // We should read EEPROM for all cases. rt2860b
- NICReadEEPROMParameters(pAd, mac);
-
- printk("3. Phy Mode = %d\n", pAd->CommonCfg.PhyMode);
-
- NICInitAsicFromEEPROM(pAd); //rt2860b
-
- // Set PHY to appropriate mode
- TmpPhy = pAd->CommonCfg.PhyMode;
- pAd->CommonCfg.PhyMode = 0xff;
- RTMPSetPhyMode(pAd, TmpPhy);
- SetCommonHT(pAd);
-
- // No valid channels.
- if (pAd->ChannelListNum == 0)
- {
- printk("Wrong configuration. No valid channel found. Check \"ContryCode\" and \"ChannelGeography\" setting.\n");
- goto err4;
- }
-
- printk("MCS Set = %02x %02x %02x %02x %02x\n", pAd->CommonCfg.HtCapability.MCSSet[0],
- pAd->CommonCfg.HtCapability.MCSSet[1], pAd->CommonCfg.HtCapability.MCSSet[2],
- pAd->CommonCfg.HtCapability.MCSSet[3], pAd->CommonCfg.HtCapability.MCSSet[4]);
-
-#ifdef RT2870
- //Init RT30xx RFRegisters after read RFIC type from EEPROM
- NICInitRT30xxRFRegisters(pAd);
-#endif // RT2870 //
-
-#ifdef IKANOS_VX_1X0
- VR_IKANOS_FP_Init(pAd->ApCfg.BssidNum, pAd->PermanentAddress);
-#endif // IKANOS_VX_1X0 //
-
- //
- // Initialize RF register to default value
- //
- AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
- AsicLockChannel(pAd, pAd->CommonCfg.Channel);
-
-#ifndef RT30xx
- // 8051 firmware require the signal during booting time.
- AsicSendCommandToMcu(pAd, 0x72, 0xFF, 0x00, 0x00);
-#endif
-
- if (pAd && (Status != NDIS_STATUS_SUCCESS))
- {
- //
- // Undo everything if it failed
- //
- if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
- {
- RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
- }
- }
- else if (pAd)
- {
- // Microsoft HCT require driver send a disconnect event after driver initialization.
- OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
- RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE);
-
- DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event B!\n"));
-
-
-#ifdef RT2870
- RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS);
- RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
-
- //
- // Support multiple BulkIn IRP,
- // the value on pAd->CommonCfg.NumOfBulkInIRP may be large than 1.
- //
- for(index=0; index<pAd->CommonCfg.NumOfBulkInIRP; index++)
- {
- RTUSBBulkReceive(pAd);
- DBGPRINT(RT_DEBUG_TRACE, ("RTUSBBulkReceive!\n" ));
- }
-#endif // RT2870 //
- }// end of else
-
-
- DBGPRINT_S(Status, ("<==== RTMPInitialize, Status=%x\n", Status));
-
- return TRUE;
-
-
-err4:
-err3:
- MlmeHalt(pAd);
-err2:
- RTMPFreeTxRxRingMemory(pAd);
-err1:
- os_free_mem(pAd, pAd->mpdu_blk_pool.mem); // free BA pool
- RT28XX_IRQ_RELEASE(net_dev);
-
- // shall not set ml_priv to NULL here because the ml_priv didn't been free yet.
- //net_dev->ml_priv = 0;
-
- printk("!!! %s Initialized fail !!!\n", RT28xx_CHIP_NAME);
- return FALSE;
-} /* End of rt28xx_init */
-
-
-/*
-========================================================================
-Routine Description:
- Open raxx interface.
-
-Arguments:
- *net_dev the raxx interface pointer
-
-Return Value:
- 0 Open OK
- otherwise Open Fail
-
-Note:
-========================================================================
-*/
-int rt28xx_open(IN PNET_DEV dev)
-{
- struct net_device * net_dev = (struct net_device *)dev;
- PRTMP_ADAPTER pAd = net_dev->ml_priv;
- int retval = 0;
- POS_COOKIE pObj;
-
-
- // Sanity check for pAd
- if (pAd == NULL)
- {
- /* if 1st open fail, pAd will be free;
- So the net_dev->ml_priv will be NULL in 2rd open */
- return -1;
- }
-
- // Init
- pObj = (POS_COOKIE)pAd->OS_Cookie;
-
- // reset Adapter flags
- RTMP_CLEAR_FLAGS(pAd);
-
- // Request interrupt service routine for PCI device
- // register the interrupt routine with the os
- RT28XX_IRQ_REQUEST(net_dev);
-
-
- // Init BssTab & ChannelInfo tabbles for auto channel select.
-
-
- // Chip & other init
- if (rt28xx_init(net_dev) == FALSE)
- goto err;
-
- NdisZeroMemory(pAd->StaCfg.dev_name, 16);
- NdisMoveMemory(pAd->StaCfg.dev_name, net_dev->name, strlen(net_dev->name));
-
- // Set up the Mac address
- NdisMoveMemory(net_dev->dev_addr, (void *) pAd->CurrentAddress, 6);
-
- // Init IRQ parameters
- RT28XX_IRQ_INIT(pAd);
-
- // Various AP function init
-
- // Enable Interrupt
- RT28XX_IRQ_ENABLE(pAd);
-
- // Now Enable RxTx
- RTMPEnableRxTx(pAd);
- RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP);
-
- {
- UINT32 reg = 0;
- RTMP_IO_READ32(pAd, 0x1300, ®); // clear garbage interrupts
- printk("0x1300 = %08x\n", reg);
- }
-
- return (retval);
-
-err:
- return (-1);
-} /* End of rt28xx_open */
-
-static const struct net_device_ops rt2870_netdev_ops = {
- .ndo_open = MainVirtualIF_open,
- .ndo_stop = MainVirtualIF_close,
- .ndo_do_ioctl = rt28xx_ioctl,
- .ndo_get_stats = RT28xx_get_ether_stats,
- .ndo_validate_addr = NULL,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_change_mtu = eth_change_mtu,
-#ifdef IKANOS_VX_1X0
- .ndo_start_xmit = IKANOS_DataFramesTx,
-#else
- .ndo_start_xmit = rt28xx_send_packets,
-#endif
-};
-
-/* Must not be called for mdev and apdev */
-static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd)
-{
- NDIS_STATUS Status;
- INT i=0;
- CHAR slot_name[IFNAMSIZ];
- struct net_device *device;
-
-#if WIRELESS_EXT >= 12
- if (pAd->OpMode == OPMODE_STA)
- {
- dev->wireless_handlers = &rt28xx_iw_handler_def;
- }
-#endif //WIRELESS_EXT >= 12
-
-#if WIRELESS_EXT < 21
- dev->get_wireless_stats = rt28xx_get_wireless_stats;
-#endif
- dev->priv_flags = INT_MAIN;
- dev->netdev_ops = &rt2870_netdev_ops;
- // find available device name
- for (i = 0; i < 8; i++)
- {
- sprintf(slot_name, "ra%d", i);
-
- device = dev_get_by_name(dev_net(dev), slot_name);
- if (device != NULL)
- dev_put(device);
-
- if (device == NULL)
- break;
- }
-
- if(i == 8)
- {
- DBGPRINT(RT_DEBUG_ERROR, ("No available slot name\n"));
- Status = NDIS_STATUS_FAILURE;
- }
- else
- {
- sprintf(dev->name, "ra%d", i);
- Status = NDIS_STATUS_SUCCESS;
- }
-
- return Status;
-
-}
-
-/*
-========================================================================
-Routine Description:
- Probe RT28XX chipset.
-
-Arguments:
- _dev_p Point to the PCI or USB device
- _dev_id_p Point to the PCI or USB device ID
-
-Return Value:
- 0 Probe OK
- -ENODEV Probe Fail
-
-Note:
-========================================================================
-*/
-INT __devinit rt28xx_probe(
- IN void *_dev_p,
- IN void *_dev_id_p,
- IN UINT argc,
- OUT PRTMP_ADAPTER *ppAd)
-{
- struct net_device *net_dev;
- PRTMP_ADAPTER pAd = (PRTMP_ADAPTER) NULL;
- INT status;
- PVOID handle;
-#ifdef RT2870
- struct usb_interface *intf = (struct usb_interface *)_dev_p;
- struct usb_device *dev_p = interface_to_usbdev(intf);
-
- dev_p = usb_get_dev(dev_p);
-#endif // RT2870 //
-
-
- DBGPRINT(RT_DEBUG_TRACE, ("STA Driver version-%s\n", STA_DRIVER_VERSION));
-
- net_dev = alloc_etherdev(sizeof(PRTMP_ADAPTER));
- if (net_dev == NULL)
- {
- printk("alloc_netdev failed\n");
-
- goto err_out;
- }
-
- netif_stop_queue(net_dev);
-
-/* for supporting Network Manager */
-/* Set the sysfs physical device reference for the network logical device
- * if set prior to registration will cause a symlink during initialization.
- */
- SET_NETDEV_DEV(net_dev, &(dev_p->dev));
-
- // Allocate RTMP_ADAPTER miniport adapter structure
- handle = kmalloc(sizeof(struct os_cookie), GFP_KERNEL);
- RT28XX_HANDLE_DEV_ASSIGN(handle, dev_p);
-
- status = RTMPAllocAdapterBlock(handle, &pAd);
- if (status != NDIS_STATUS_SUCCESS)
- goto err_out_free_netdev;
-
- net_dev->ml_priv = (PVOID)pAd;
- pAd->net_dev = net_dev; // must be before RT28XXNetDevInit()
-
- RT28XXNetDevInit(_dev_p, net_dev, pAd);
-
- pAd->StaCfg.OriDevType = net_dev->type;
-
- // Post config
- if (RT28XXProbePostConfig(_dev_p, pAd, 0) == FALSE)
- goto err_out_unmap;
-
- pAd->OpMode = OPMODE_STA;
-
- // sample move
- if (rt_ieee80211_if_setup(net_dev, pAd) != NDIS_STATUS_SUCCESS)
- goto err_out_unmap;
-
- // Register this device
- status = register_netdev(net_dev);
- if (status)
- goto err_out_unmap;
-
- // Set driver data
- RT28XX_DRVDATA_SET(_dev_p);
-
-
-
- *ppAd = pAd;
- return 0; // probe ok
-
-
- /* --------------------------- ERROR HANDLE --------------------------- */
-err_out_unmap:
- RTMPFreeAdapter(pAd);
- RT28XX_UNMAP();
-
-err_out_free_netdev:
- free_netdev(net_dev);
-
-err_out:
- RT28XX_PUT_DEVICE(dev_p);
-
- return -ENODEV; /* probe fail */
-} /* End of rt28xx_probe */
-
-
-/*
-========================================================================
-Routine Description:
- The entry point for Linux kernel sent packet to our driver.
-
-Arguments:
- sk_buff *skb the pointer refer to a sk_buffer.
-
-Return Value:
- 0
-
-Note:
- This function is the entry point of Tx Path for Os delivery packet to
- our driver. You only can put OS-depened & STA/AP common handle procedures
- in here.
-========================================================================
-*/
-int rt28xx_packet_xmit(struct sk_buff *skb)
-{
- struct net_device *net_dev = skb->dev;
- PRTMP_ADAPTER pAd = net_dev->ml_priv;
- int status = 0;
- PNDIS_PACKET pPacket = (PNDIS_PACKET) skb;
-
- {
- // Drop send request since we are in monitor mode
- if (MONITOR_ON(pAd))
- {
- RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
- goto done;
- }
- }
-
- // EapolStart size is 18
- if (skb->len < 14)
- {
- //printk("bad packet size: %d\n", pkt->len);
- hex_dump("bad packet", skb->data, skb->len);
- RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE);
- goto done;
- }
-
- RTMP_SET_PACKET_5VT(pPacket, 0);
-#ifdef CONFIG_5VT_ENHANCE
- if (*(int*)(skb->cb) == BRIDGE_TAG) {
- RTMP_SET_PACKET_5VT(pPacket, 1);
- }
-#endif
-
- STASendPackets((NDIS_HANDLE)pAd, (PPNDIS_PACKET) &pPacket, 1);
-
- status = 0;
-done:
-
- return status;
-}
-
-
-/*
-========================================================================
-Routine Description:
- Send a packet to WLAN.
-
-Arguments:
- skb_p points to our adapter
- dev_p which WLAN network interface
-
-Return Value:
- 0: transmit successfully
- otherwise: transmit fail
-
-Note:
-========================================================================
-*/
-INT rt28xx_send_packets(
- IN struct sk_buff *skb_p,
- IN struct net_device *net_dev)
-{
- RTMP_ADAPTER *pAd = net_dev->ml_priv;
-
- if (!(net_dev->flags & IFF_UP))
- {
- RELEASE_NDIS_PACKET(pAd, (PNDIS_PACKET)skb_p, NDIS_STATUS_FAILURE);
- return 0;
- }
-
- NdisZeroMemory((PUCHAR)&skb_p->cb[CB_OFF], 15);
- RTMP_SET_PACKET_NET_DEVICE_MBSSID(skb_p, MAIN_MBSSID);
-
- return rt28xx_packet_xmit(skb_p);
-} /* End of MBSS_VirtualIF_PacketSend */
-
-
-
-
-void CfgInitHook(PRTMP_ADAPTER pAd)
-{
- pAd->bBroadComHT = TRUE;
-} /* End of CfgInitHook */
-
-#if WIRELESS_EXT >= 12
-// This function will be called when query /proc
-struct iw_statistics *rt28xx_get_wireless_stats(
- IN struct net_device *net_dev)
-{
- PRTMP_ADAPTER pAd = net_dev->ml_priv;
-
-
- DBGPRINT(RT_DEBUG_TRACE, ("rt28xx_get_wireless_stats --->\n"));
-
- pAd->iw_stats.status = 0; // Status - device dependent for now
-
- // link quality
- pAd->iw_stats.qual.qual = ((pAd->Mlme.ChannelQuality * 12)/10 + 10);
- if(pAd->iw_stats.qual.qual > 100)
- pAd->iw_stats.qual.qual = 100;
-
- if (pAd->OpMode == OPMODE_STA)
- pAd->iw_stats.qual.level = RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2);
-
- pAd->iw_stats.qual.noise = pAd->BbpWriteLatch[66]; // noise level (dBm)
-
- pAd->iw_stats.qual.noise += 256 - 143;
- pAd->iw_stats.qual.updated = 1; // Flags to know if updated
-#ifdef IW_QUAL_DBM
- pAd->iw_stats.qual.updated |= IW_QUAL_DBM; // Level + Noise are dBm
-#endif // IW_QUAL_DBM //
-
- pAd->iw_stats.discard.nwid = 0; // Rx : Wrong nwid/essid
- pAd->iw_stats.miss.beacon = 0; // Missed beacons/superframe
-
- DBGPRINT(RT_DEBUG_TRACE, ("<--- rt28xx_get_wireless_stats\n"));
- return &pAd->iw_stats;
-} /* End of rt28xx_get_wireless_stats */
-#endif // WIRELESS_EXT //
-
-
-
-void tbtt_tasklet(unsigned long data)
-{
-#define MAX_TX_IN_TBTT (16)
-
-}
-
-INT rt28xx_ioctl(
- IN struct net_device *net_dev,
- IN OUT struct ifreq *rq,
- IN INT cmd)
-{
- VIRTUAL_ADAPTER *pVirtualAd = NULL;
- RTMP_ADAPTER *pAd = NULL;
- INT ret = 0;
-
- if (net_dev->priv_flags == INT_MAIN)
- {
- pAd = net_dev->ml_priv;
- }
- else
- {
- pVirtualAd = net_dev->ml_priv;
- pAd = pVirtualAd->RtmpDev->ml_priv;
- }
-
- if (pAd == NULL)
- {
- /* if 1st open fail, pAd will be free;
- So the net_dev->ml_priv will be NULL in 2rd open */
- return -ENETDOWN;
- }
-
- ret = rt28xx_sta_ioctl(net_dev, rq, cmd);
-
- return ret;
-}
-
-/*
- ========================================================================
-
- Routine Description:
- return ethernet statistics counter
-
- Arguments:
- net_dev Pointer to net_device
-
- Return Value:
- net_device_stats*
-
- Note:
-
- ========================================================================
-*/
-struct net_device_stats *RT28xx_get_ether_stats(
- IN struct net_device *net_dev)
-{
- RTMP_ADAPTER *pAd = NULL;
-
- if (net_dev)
- pAd = net_dev->ml_priv;
-
- if (pAd)
- {
-
- pAd->stats.rx_packets = pAd->WlanCounters.ReceivedFragmentCount.QuadPart;
- pAd->stats.tx_packets = pAd->WlanCounters.TransmittedFragmentCount.QuadPart;
-
- pAd->stats.rx_bytes = pAd->RalinkCounters.ReceivedByteCount;
- pAd->stats.tx_bytes = pAd->RalinkCounters.TransmittedByteCount;
-
- pAd->stats.rx_errors = pAd->Counters8023.RxErrors;
- pAd->stats.tx_errors = pAd->Counters8023.TxErrors;
-
- pAd->stats.rx_dropped = 0;
- pAd->stats.tx_dropped = 0;
-
- pAd->stats.multicast = pAd->WlanCounters.MulticastReceivedFrameCount.QuadPart; // multicast packets received
- pAd->stats.collisions = pAd->Counters8023.OneCollision + pAd->Counters8023.MoreCollisions; // Collision packets
-
- pAd->stats.rx_length_errors = 0;
- pAd->stats.rx_over_errors = pAd->Counters8023.RxNoBuffer; // receiver ring buff overflow
- pAd->stats.rx_crc_errors = 0;//pAd->WlanCounters.FCSErrorCount; // recved pkt with crc error
- pAd->stats.rx_frame_errors = pAd->Counters8023.RcvAlignmentErrors; // recv'd frame alignment error
- pAd->stats.rx_fifo_errors = pAd->Counters8023.RxNoBuffer; // recv'r fifo overrun
- pAd->stats.rx_missed_errors = 0; // receiver missed packet
-
- // detailed tx_errors
- pAd->stats.tx_aborted_errors = 0;
- pAd->stats.tx_carrier_errors = 0;
- pAd->stats.tx_fifo_errors = 0;
- pAd->stats.tx_heartbeat_errors = 0;
- pAd->stats.tx_window_errors = 0;
-
- // for cslip etc
- pAd->stats.rx_compressed = 0;
- pAd->stats.tx_compressed = 0;
-
- return &pAd->stats;
- }
- else
- return NULL;
-}
-
+#include "../rt2860/rt_main_dev.c"
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
- */
-
-#include "rt_config.h"
-
-static void HTParametersHook(
- IN PRTMP_ADAPTER pAd,
- IN CHAR *pValueStr,
- IN CHAR *pInput);
-
-#define ETH_MAC_ADDR_STR_LEN 17 // in format of xx:xx:xx:xx:xx:xx
-
-// We assume the s1 is a sting, s2 is a memory space with 6 bytes. and content of s1 will be changed.
-BOOLEAN rtstrmactohex(char *s1, char *s2)
-{
- int i = 0;
- char *ptokS = s1, *ptokE = s1;
-
- if (strlen(s1) != ETH_MAC_ADDR_STR_LEN)
- return FALSE;
-
- while((*ptokS) != '\0')
- {
- if((ptokE = strchr(ptokS, ':')) != NULL)
- *ptokE++ = '\0';
- if ((strlen(ptokS) != 2) || (!isxdigit(*ptokS)) || (!isxdigit(*(ptokS+1))))
- break; // fail
- AtoH(ptokS, &s2[i++], 1);
- ptokS = ptokE;
- if (i == 6)
- break; // parsing finished
- }
-
- return ( i == 6 ? TRUE : FALSE);
-
-}
-
-
-// we assume the s1 and s2 both are strings.
-BOOLEAN rtstrcasecmp(char *s1, char *s2)
-{
- char *p1 = s1, *p2 = s2;
-
- if (strlen(s1) != strlen(s2))
- return FALSE;
-
- while(*p1 != '\0')
- {
- if((*p1 != *p2) && ((*p1 ^ *p2) != 0x20))
- return FALSE;
- p1++;
- p2++;
- }
-
- return TRUE;
-}
-
-// we assume the s1 (buffer) and s2 (key) both are strings.
-char * rtstrstruncasecmp(char * s1, char * s2)
-{
- INT l1, l2, i;
- char temp1, temp2;
-
- l2 = strlen(s2);
- if (!l2)
- return (char *) s1;
-
- l1 = strlen(s1);
-
- while (l1 >= l2)
- {
- l1--;
-
- for(i=0; i<l2; i++)
- {
- temp1 = *(s1+i);
- temp2 = *(s2+i);
-
- if (('a' <= temp1) && (temp1 <= 'z'))
- temp1 = 'A'+(temp1-'a');
- if (('a' <= temp2) && (temp2 <= 'z'))
- temp2 = 'A'+(temp2-'a');
-
- if (temp1 != temp2)
- break;
- }
-
- if (i == l2)
- return (char *) s1;
-
- s1++;
- }
-
- return NULL; // not found
-}
-
-//add by kathy
-
- /**
- * strstr - Find the first substring in a %NUL terminated string
- * @s1: The string to be searched
- * @s2: The string to search for
- */
-char * rtstrstr(const char * s1,const char * s2)
-{
- INT l1, l2;
-
- l2 = strlen(s2);
- if (!l2)
- return (char *) s1;
-
- l1 = strlen(s1);
-
- while (l1 >= l2)
- {
- l1--;
- if (!memcmp(s1,s2,l2))
- return (char *) s1;
- s1++;
- }
-
- return NULL;
-}
-
-/**
- * rstrtok - Split a string into tokens
- * @s: The string to be searched
- * @ct: The characters to search for
- * * WARNING: strtok is deprecated, use strsep instead. However strsep is not compatible with old architecture.
- */
-char * __rstrtok;
-char * rstrtok(char * s,const char * ct)
-{
- char *sbegin, *send;
-
- sbegin = s ? s : __rstrtok;
- if (!sbegin)
- {
- return NULL;
- }
-
- sbegin += strspn(sbegin,ct);
- if (*sbegin == '\0')
- {
- __rstrtok = NULL;
- return( NULL );
- }
-
- send = strpbrk( sbegin, ct);
- if (send && *send != '\0')
- *send++ = '\0';
-
- __rstrtok = send;
-
- return (sbegin);
-}
-
-/**
- * delimitcnt - return the count of a given delimiter in a given string.
- * @s: The string to be searched.
- * @ct: The delimiter to search for.
- * Notice : We suppose the delimiter is a single-char string(for example : ";").
- */
-INT delimitcnt(char * s,const char * ct)
-{
- INT count = 0;
- /* point to the beginning of the line */
- const char *token = s;
-
- for ( ;; )
- {
- token = strpbrk(token, ct); /* search for delimiters */
-
- if ( token == NULL )
- {
- /* advanced to the terminating null character */
- break;
- }
- /* skip the delimiter */
- ++token;
-
- /*
- * Print the found text: use len with %.*s to specify field width.
- */
-
- /* accumulate delimiter count */
- ++count;
- }
- return count;
-}
-
-/*
- * converts the Internet host address from the standard numbers-and-dots notation
- * into binary data.
- * returns nonzero if the address is valid, zero if not.
- */
-int rtinet_aton(const char *cp, unsigned int *addr)
-{
- unsigned int val;
- int base, n;
- char c;
- unsigned int parts[4];
- unsigned int *pp = parts;
-
- for (;;)
- {
- /*
- * Collect number up to ``.''.
- * Values are specified as for C:
- * 0x=hex, 0=octal, other=decimal.
- */
- val = 0;
- base = 10;
- if (*cp == '0')
- {
- if (*++cp == 'x' || *cp == 'X')
- base = 16, cp++;
- else
- base = 8;
- }
- while ((c = *cp) != '\0')
- {
- if (isdigit((unsigned char) c))
- {
- val = (val * base) + (c - '0');
- cp++;
- continue;
- }
- if (base == 16 && isxdigit((unsigned char) c))
- {
- val = (val << 4) +
- (c + 10 - (islower((unsigned char) c) ? 'a' : 'A'));
- cp++;
- continue;
- }
- break;
- }
- if (*cp == '.')
- {
- /*
- * Internet format: a.b.c.d a.b.c (with c treated as 16-bits)
- * a.b (with b treated as 24 bits)
- */
- if (pp >= parts + 3 || val > 0xff)
- return 0;
- *pp++ = val, cp++;
- }
- else
- break;
- }
-
- /*
- * Check for trailing junk.
- */
- while (*cp)
- if (!isspace((unsigned char) *cp++))
- return 0;
-
- /*
- * Concoct the address according to the number of parts specified.
- */
- n = pp - parts + 1;
- switch (n)
- {
-
- case 1: /* a -- 32 bits */
- break;
-
- case 2: /* a.b -- 8.24 bits */
- if (val > 0xffffff)
- return 0;
- val |= parts[0] << 24;
- break;
-
- case 3: /* a.b.c -- 8.8.16 bits */
- if (val > 0xffff)
- return 0;
- val |= (parts[0] << 24) | (parts[1] << 16);
- break;
-
- case 4: /* a.b.c.d -- 8.8.8.8 bits */
- if (val > 0xff)
- return 0;
- val |= (parts[0] << 24) | (parts[1] << 16) | (parts[2] << 8);
- break;
- }
-
- *addr = htonl(val);
- return 1;
-
-}
-
-/*
- ========================================================================
-
- Routine Description:
- Find key section for Get key parameter.
-
- Arguments:
- buffer Pointer to the buffer to start find the key section
- section the key of the secion to be find
-
- Return Value:
- NULL Fail
- Others Success
- ========================================================================
-*/
-PUCHAR RTMPFindSection(
- IN PCHAR buffer)
-{
- CHAR temp_buf[32];
- PUCHAR ptr;
-
- strcpy(temp_buf, "Default");
-
- if((ptr = rtstrstr(buffer, temp_buf)) != NULL)
- return (ptr+strlen("\n"));
- else
- return NULL;
-}
-
-/*
- ========================================================================
-
- Routine Description:
- Get key parameter.
-
- Arguments:
- key Pointer to key string
- dest Pointer to destination
- destsize The datasize of the destination
- buffer Pointer to the buffer to start find the key
-
- Return Value:
- TRUE Success
- FALSE Fail
-
- Note:
- This routine get the value with the matched key (case case-sensitive)
- ========================================================================
-*/
-INT RTMPGetKeyParameter(
- IN PCHAR key,
- OUT PCHAR dest,
- IN INT destsize,
- IN PCHAR buffer)
-{
- UCHAR *temp_buf1 = NULL;
- UCHAR *temp_buf2 = NULL;
- CHAR *start_ptr;
- CHAR *end_ptr;
- CHAR *ptr;
- CHAR *offset = 0;
- INT len;
-
- //temp_buf1 = kmalloc(MAX_PARAM_BUFFER_SIZE, MEM_ALLOC_FLAG);
- os_alloc_mem(NULL, &temp_buf1, MAX_PARAM_BUFFER_SIZE);
-
- if(temp_buf1 == NULL)
- return (FALSE);
-
- //temp_buf2 = kmalloc(MAX_PARAM_BUFFER_SIZE, MEM_ALLOC_FLAG);
- os_alloc_mem(NULL, &temp_buf2, MAX_PARAM_BUFFER_SIZE);
- if(temp_buf2 == NULL)
- {
- os_free_mem(NULL, temp_buf1);
- return (FALSE);
- }
-
- //find section
- if((offset = RTMPFindSection(buffer)) == NULL)
- {
- os_free_mem(NULL, temp_buf1);
- os_free_mem(NULL, temp_buf2);
- return (FALSE);
- }
-
- strcpy(temp_buf1, "\n");
- strcat(temp_buf1, key);
- strcat(temp_buf1, "=");
-
- //search key
- if((start_ptr=rtstrstr(offset, temp_buf1))==NULL)
- {
- os_free_mem(NULL, temp_buf1);
- os_free_mem(NULL, temp_buf2);
- return (FALSE);
- }
-
- start_ptr+=strlen("\n");
- if((end_ptr=rtstrstr(start_ptr, "\n"))==NULL)
- end_ptr=start_ptr+strlen(start_ptr);
-
- if (end_ptr<start_ptr)
- {
- os_free_mem(NULL, temp_buf1);
- os_free_mem(NULL, temp_buf2);
- return (FALSE);
- }
-
- NdisMoveMemory(temp_buf2, start_ptr, end_ptr-start_ptr);
- temp_buf2[end_ptr-start_ptr]='\0';
- len = strlen(temp_buf2);
- strcpy(temp_buf1, temp_buf2);
- if((start_ptr=rtstrstr(temp_buf1, "=")) == NULL)
- {
- os_free_mem(NULL, temp_buf1);
- os_free_mem(NULL, temp_buf2);
- return (FALSE);
- }
-
- strcpy(temp_buf2, start_ptr+1);
- ptr = temp_buf2;
- //trim space or tab
- while(*ptr != 0x00)
- {
- if( (*ptr == ' ') || (*ptr == '\t') )
- ptr++;
- else
- break;
- }
-
- len = strlen(ptr);
- memset(dest, 0x00, destsize);
- strncpy(dest, ptr, len >= destsize ? destsize: len);
-
- os_free_mem(NULL, temp_buf1);
- os_free_mem(NULL, temp_buf2);
- return TRUE;
-}
-
-/*
- ========================================================================
-
- Routine Description:
- Get key parameter.
-
- Arguments:
- key Pointer to key string
- dest Pointer to destination
- destsize The datasize of the destination
- buffer Pointer to the buffer to start find the key
-
- Return Value:
- TRUE Success
- FALSE Fail
-
- Note:
- This routine get the value with the matched key (case case-sensitive).
- It is called for parsing SSID and any key string.
- ========================================================================
-*/
-INT RTMPGetCriticalParameter(
- IN PCHAR key,
- OUT PCHAR dest,
- IN INT destsize,
- IN PCHAR buffer)
-{
- UCHAR *temp_buf1 = NULL;
- UCHAR *temp_buf2 = NULL;
- CHAR *start_ptr;
- CHAR *end_ptr;
- CHAR *ptr;
- CHAR *offset = 0;
- INT len;
-
- //temp_buf1 = kmalloc(MAX_PARAM_BUFFER_SIZE, MEM_ALLOC_FLAG);
- os_alloc_mem(NULL, &temp_buf1, MAX_PARAM_BUFFER_SIZE);
-
- if(temp_buf1 == NULL)
- return (FALSE);
-
- //temp_buf2 = kmalloc(MAX_PARAM_BUFFER_SIZE, MEM_ALLOC_FLAG);
- os_alloc_mem(NULL, &temp_buf2, MAX_PARAM_BUFFER_SIZE);
- if(temp_buf2 == NULL)
- {
- os_free_mem(NULL, temp_buf1);
- return (FALSE);
- }
-
- //find section
- if((offset = RTMPFindSection(buffer)) == NULL)
- {
- os_free_mem(NULL, temp_buf1);
- os_free_mem(NULL, temp_buf2);
- return (FALSE);
- }
-
- strcpy(temp_buf1, "\n");
- strcat(temp_buf1, key);
- strcat(temp_buf1, "=");
-
- //search key
- if((start_ptr=rtstrstr(offset, temp_buf1))==NULL)
- {
- os_free_mem(NULL, temp_buf1);
- os_free_mem(NULL, temp_buf2);
- return (FALSE);
- }
-
- start_ptr+=strlen("\n");
- if((end_ptr=rtstrstr(start_ptr, "\n"))==NULL)
- end_ptr=start_ptr+strlen(start_ptr);
-
- if (end_ptr<start_ptr)
- {
- os_free_mem(NULL, temp_buf1);
- os_free_mem(NULL, temp_buf2);
- return (FALSE);
- }
-
- NdisMoveMemory(temp_buf2, start_ptr, end_ptr-start_ptr);
- temp_buf2[end_ptr-start_ptr]='\0';
- len = strlen(temp_buf2);
- strcpy(temp_buf1, temp_buf2);
- if((start_ptr=rtstrstr(temp_buf1, "=")) == NULL)
- {
- os_free_mem(NULL, temp_buf1);
- os_free_mem(NULL, temp_buf2);
- return (FALSE);
- }
-
- strcpy(temp_buf2, start_ptr+1);
- ptr = temp_buf2;
-
- //trim tab
- /* We cannot trim space(' ') for SSID and key string. */
- while(*ptr != 0x00)
- {
- //if( (*ptr == ' ') || (*ptr == '\t') )
- if( (*ptr == '\t') )
- ptr++;
- else
- break;
- }
-
- len = strlen(ptr);
- memset(dest, 0x00, destsize);
- strncpy(dest, ptr, len >= destsize ? destsize: len);
-
- os_free_mem(NULL, temp_buf1);
- os_free_mem(NULL, temp_buf2);
- return TRUE;
-}
-
-/*
- ========================================================================
-
- Routine Description:
- Get multiple key parameter.
-
- Arguments:
- key Pointer to key string
- dest Pointer to destination
- destsize The datasize of the destination
- buffer Pointer to the buffer to start find the key
-
- Return Value:
- TRUE Success
- FALSE Fail
-
- Note:
- This routine get the value with the matched key (case case-sensitive)
- ========================================================================
-*/
-INT RTMPGetKeyParameterWithOffset(
- IN PCHAR key,
- OUT PCHAR dest,
- OUT USHORT *end_offset,
- IN INT destsize,
- IN PCHAR buffer,
- IN BOOLEAN bTrimSpace)
-{
- UCHAR *temp_buf1 = NULL;
- UCHAR *temp_buf2 = NULL;
- CHAR *start_ptr;
- CHAR *end_ptr;
- CHAR *ptr;
- CHAR *offset = 0;
- INT len;
-
- if (*end_offset >= MAX_INI_BUFFER_SIZE)
- return (FALSE);
-
- os_alloc_mem(NULL, &temp_buf1, MAX_PARAM_BUFFER_SIZE);
-
- if(temp_buf1 == NULL)
- return (FALSE);
-
- os_alloc_mem(NULL, &temp_buf2, MAX_PARAM_BUFFER_SIZE);
- if(temp_buf2 == NULL)
- {
- os_free_mem(NULL, temp_buf1);
- return (FALSE);
- }
-
- //find section
- if(*end_offset == 0)
- {
- if ((offset = RTMPFindSection(buffer)) == NULL)
- {
- os_free_mem(NULL, temp_buf1);
- os_free_mem(NULL, temp_buf2);
- return (FALSE);
- }
- }
- else
- offset = buffer + (*end_offset);
-
- strcpy(temp_buf1, "\n");
- strcat(temp_buf1, key);
- strcat(temp_buf1, "=");
-
- //search key
- if((start_ptr=rtstrstr(offset, temp_buf1))==NULL)
- {
- os_free_mem(NULL, temp_buf1);
- os_free_mem(NULL, temp_buf2);
- return (FALSE);
- }
-
- start_ptr+=strlen("\n");
- if((end_ptr=rtstrstr(start_ptr, "\n"))==NULL)
- end_ptr=start_ptr+strlen(start_ptr);
-
- if (end_ptr<start_ptr)
- {
- os_free_mem(NULL, temp_buf1);
- os_free_mem(NULL, temp_buf2);
- return (FALSE);
- }
-
- *end_offset = end_ptr - buffer;
-
- NdisMoveMemory(temp_buf2, start_ptr, end_ptr-start_ptr);
- temp_buf2[end_ptr-start_ptr]='\0';
- len = strlen(temp_buf2);
- strcpy(temp_buf1, temp_buf2);
- if((start_ptr=rtstrstr(temp_buf1, "=")) == NULL)
- {
- os_free_mem(NULL, temp_buf1);
- os_free_mem(NULL, temp_buf2);
- return (FALSE);
- }
-
- strcpy(temp_buf2, start_ptr+1);
- ptr = temp_buf2;
- //trim space or tab
- while(*ptr != 0x00)
- {
- if((bTrimSpace && (*ptr == ' ')) || (*ptr == '\t') )
- ptr++;
- else
- break;
- }
-
- len = strlen(ptr);
- memset(dest, 0x00, destsize);
- strncpy(dest, ptr, len >= destsize ? destsize: len);
-
- os_free_mem(NULL, temp_buf1);
- os_free_mem(NULL, temp_buf2);
- return TRUE;
-}
-
-
-static int rtmp_parse_key_buffer_from_file(IN PRTMP_ADAPTER pAd,IN char *buffer,IN ULONG KeyType,IN INT BSSIdx,IN INT KeyIdx)
-{
- PUCHAR keybuff;
- INT i = BSSIdx, idx = KeyIdx;
- ULONG KeyLen;
- UCHAR CipherAlg = CIPHER_WEP64;
-
- keybuff = buffer;
- KeyLen = strlen(keybuff);
-
- if (KeyType == 1)
- {//Ascii
- if( (KeyLen == 5) || (KeyLen == 13))
- {
- pAd->SharedKey[i][idx].KeyLen = KeyLen;
- NdisMoveMemory(pAd->SharedKey[i][idx].Key, keybuff, KeyLen);
- if (KeyLen == 5)
- CipherAlg = CIPHER_WEP64;
- else
- CipherAlg = CIPHER_WEP128;
- pAd->SharedKey[i][idx].CipherAlg = CipherAlg;
-
- DBGPRINT(RT_DEBUG_TRACE, ("I/F(ra%d) Key%dStr=%s and type=%s\n", i, idx+1, keybuff, (KeyType == 0) ? "Hex":"Ascii"));
- return 1;
- }
- else
- {//Invalid key length
- DBGPRINT(RT_DEBUG_ERROR, ("Key%dStr is Invalid key length! KeyLen = %ld!\n", idx+1, KeyLen));
- return 0;
- }
- }
- else
- {//Hex type
- if( (KeyLen == 10) || (KeyLen == 26))
- {
- pAd->SharedKey[i][idx].KeyLen = KeyLen / 2;
- AtoH(keybuff, pAd->SharedKey[i][idx].Key, KeyLen / 2);
- if (KeyLen == 10)
- CipherAlg = CIPHER_WEP64;
- else
- CipherAlg = CIPHER_WEP128;
- pAd->SharedKey[i][idx].CipherAlg = CipherAlg;
-
- DBGPRINT(RT_DEBUG_TRACE, ("I/F(ra%d) Key%dStr=%s and type=%s\n", i, idx+1, keybuff, (KeyType == 0) ? "Hex":"Ascii"));
- return 1;
- }
- else
- {//Invalid key length
- DBGPRINT(RT_DEBUG_ERROR, ("I/F(ra%d) Key%dStr is Invalid key length! KeyLen = %ld!\n", i, idx+1, KeyLen));
- return 0;
- }
- }
-}
-static void rtmp_read_key_parms_from_file(IN PRTMP_ADAPTER pAd, char *tmpbuf, char *buffer)
-{
- char tok_str[16];
- PUCHAR macptr;
- INT i = 0, idx;
- ULONG KeyType[MAX_MBSSID_NUM];
- ULONG KeyIdx;
-
- NdisZeroMemory(KeyType, MAX_MBSSID_NUM);
-
- //DefaultKeyID
- if(RTMPGetKeyParameter("DefaultKeyID", tmpbuf, 25, buffer))
- {
- {
- KeyIdx = simple_strtol(tmpbuf, 0, 10);
- if((KeyIdx >= 1 ) && (KeyIdx <= 4))
- pAd->StaCfg.DefaultKeyId = (UCHAR) (KeyIdx - 1);
- else
- pAd->StaCfg.DefaultKeyId = 0;
-
- DBGPRINT(RT_DEBUG_TRACE, ("DefaultKeyID(0~3)=%d\n", pAd->StaCfg.DefaultKeyId));
- }
- }
-
-
- for (idx = 0; idx < 4; idx++)
- {
- sprintf(tok_str, "Key%dType", idx + 1);
- //Key1Type
- if (RTMPGetKeyParameter(tok_str, tmpbuf, 128, buffer))
- {
- for (i = 0, macptr = rstrtok(tmpbuf,";"); macptr; macptr = rstrtok(NULL,";"), i++)
- {
- KeyType[i] = simple_strtol(macptr, 0, 10);
- }
-
- {
- sprintf(tok_str, "Key%dStr", idx + 1);
- if (RTMPGetCriticalParameter(tok_str, tmpbuf, 128, buffer))
- {
- rtmp_parse_key_buffer_from_file(pAd, tmpbuf, KeyType[BSS0], BSS0, idx);
- }
- }
- }
- }
-}
-
-static void rtmp_read_sta_wmm_parms_from_file(IN PRTMP_ADAPTER pAd, char *tmpbuf, char *buffer)
-{
- PUCHAR macptr;
- INT i=0;
- BOOLEAN bWmmEnable = FALSE;
-
- //WmmCapable
- if(RTMPGetKeyParameter("WmmCapable", tmpbuf, 32, buffer))
- {
- if(simple_strtol(tmpbuf, 0, 10) != 0) //Enable
- {
- pAd->CommonCfg.bWmmCapable = TRUE;
- bWmmEnable = TRUE;
- }
- else //Disable
- {
- pAd->CommonCfg.bWmmCapable = FALSE;
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("WmmCapable=%d\n", pAd->CommonCfg.bWmmCapable));
- }
-
- //AckPolicy for AC_BK, AC_BE, AC_VI, AC_VO
- if(RTMPGetKeyParameter("AckPolicy", tmpbuf, 32, buffer))
- {
- for (i = 0, macptr = rstrtok(tmpbuf,";"); macptr; macptr = rstrtok(NULL,";"), i++)
- {
- pAd->CommonCfg.AckPolicy[i] = (UCHAR)simple_strtol(macptr, 0, 10);
-
- DBGPRINT(RT_DEBUG_TRACE, ("AckPolicy[%d]=%d\n", i, pAd->CommonCfg.AckPolicy[i]));
- }
- }
-
- if (bWmmEnable)
- {
- //APSDCapable
- if(RTMPGetKeyParameter("APSDCapable", tmpbuf, 10, buffer))
- {
- if(simple_strtol(tmpbuf, 0, 10) != 0) //Enable
- pAd->CommonCfg.bAPSDCapable = TRUE;
- else
- pAd->CommonCfg.bAPSDCapable = FALSE;
-
- DBGPRINT(RT_DEBUG_TRACE, ("APSDCapable=%d\n", pAd->CommonCfg.bAPSDCapable));
- }
-
- //APSDAC for AC_BE, AC_BK, AC_VI, AC_VO
- if(RTMPGetKeyParameter("APSDAC", tmpbuf, 32, buffer))
- {
- BOOLEAN apsd_ac[4];
-
- for (i = 0, macptr = rstrtok(tmpbuf,";"); macptr; macptr = rstrtok(NULL,";"), i++)
- {
- apsd_ac[i] = (BOOLEAN)simple_strtol(macptr, 0, 10);
-
- DBGPRINT(RT_DEBUG_TRACE, ("APSDAC%d %d\n", i, apsd_ac[i]));
- }
-
- pAd->CommonCfg.bAPSDAC_BE = apsd_ac[0];
- pAd->CommonCfg.bAPSDAC_BK = apsd_ac[1];
- pAd->CommonCfg.bAPSDAC_VI = apsd_ac[2];
- pAd->CommonCfg.bAPSDAC_VO = apsd_ac[3];
- }
- }
-
-}
-
-NDIS_STATUS RTMPReadParametersHook(
- IN PRTMP_ADAPTER pAd)
-{
- PUCHAR src = NULL;
- struct file *srcf;
- INT retval, orgfsuid, orgfsgid;
- mm_segment_t orgfs;
- CHAR *buffer;
- CHAR *tmpbuf;
- ULONG RtsThresh;
- ULONG FragThresh;
- UCHAR keyMaterial[40];
-
- PUCHAR macptr;
- INT i = 0;
-
- buffer = kmalloc(MAX_INI_BUFFER_SIZE, MEM_ALLOC_FLAG);
- if(buffer == NULL)
- return NDIS_STATUS_FAILURE;
-
- tmpbuf = kmalloc(MAX_PARAM_BUFFER_SIZE, MEM_ALLOC_FLAG);
- if(tmpbuf == NULL)
- {
- kfree(buffer);
- return NDIS_STATUS_FAILURE;
- }
-
- src = STA_PROFILE_PATH;
-
- // Save uid and gid used for filesystem access.
- // Set user and group to 0 (root)
-#ifndef RT30xx
- orgfsuid = current_fsuid();
- orgfsgid = current_fsgid();
- /* Hm, can't really do this nicely anymore, so rely on these files
- * being set to the proper permission to read them... */
- /* current->cred->fsuid = current->cred->fsgid = 0; */
-#endif
- orgfs = get_fs();
- set_fs(KERNEL_DS);
-
- if (src && *src)
- {
- srcf = filp_open(src, O_RDONLY, 0);
- if (IS_ERR(srcf))
- {
- DBGPRINT(RT_DEBUG_ERROR, ("--> Error %ld opening %s\n", -PTR_ERR(srcf),src));
- }
- else
- {
- // The object must have a read method
- if (srcf->f_op && srcf->f_op->read)
- {
- memset(buffer, 0x00, MAX_INI_BUFFER_SIZE);
- retval=srcf->f_op->read(srcf, buffer, MAX_INI_BUFFER_SIZE, &srcf->f_pos);
- if (retval < 0)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("--> Read %s error %d\n", src, -retval));
- }
- else
- {
- // set file parameter to portcfg
- //CountryRegion
- if(RTMPGetKeyParameter("CountryRegion", tmpbuf, 25, buffer))
- {
- pAd->CommonCfg.CountryRegion = (UCHAR) simple_strtol(tmpbuf, 0, 10);
- DBGPRINT(RT_DEBUG_TRACE, ("CountryRegion=%d\n", pAd->CommonCfg.CountryRegion));
- }
- //CountryRegionABand
- if(RTMPGetKeyParameter("CountryRegionABand", tmpbuf, 25, buffer))
- {
- pAd->CommonCfg.CountryRegionForABand= (UCHAR) simple_strtol(tmpbuf, 0, 10);
- DBGPRINT(RT_DEBUG_TRACE, ("CountryRegionABand=%d\n", pAd->CommonCfg.CountryRegionForABand));
- }
- //CountryCode
- if(RTMPGetKeyParameter("CountryCode", tmpbuf, 25, buffer))
- {
- NdisMoveMemory(pAd->CommonCfg.CountryCode, tmpbuf , 2);
-
- if (strlen(pAd->CommonCfg.CountryCode) != 0)
- {
- pAd->CommonCfg.bCountryFlag = TRUE;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("CountryCode=%s\n", pAd->CommonCfg.CountryCode));
- }
- //ChannelGeography
- if(RTMPGetKeyParameter("ChannelGeography", tmpbuf, 25, buffer))
- {
- UCHAR Geography = (UCHAR) simple_strtol(tmpbuf, 0, 10);
- if (Geography <= BOTH)
- {
- pAd->CommonCfg.Geography = Geography;
- pAd->CommonCfg.CountryCode[2] =
- (pAd->CommonCfg.Geography == BOTH) ? ' ' : ((pAd->CommonCfg.Geography == IDOR) ? 'I' : 'O');
- DBGPRINT(RT_DEBUG_TRACE, ("ChannelGeography=%d\n", pAd->CommonCfg.Geography));
- }
- }
- else
- {
- pAd->CommonCfg.Geography = BOTH;
- pAd->CommonCfg.CountryCode[2] = ' ';
- }
-
- {
- //SSID
- if (RTMPGetCriticalParameter("SSID", tmpbuf, 256, buffer))
- {
- if (strlen(tmpbuf) <= 32)
- {
- pAd->CommonCfg.SsidLen = (UCHAR) strlen(tmpbuf);
- NdisZeroMemory(pAd->CommonCfg.Ssid, NDIS_802_11_LENGTH_SSID);
- NdisMoveMemory(pAd->CommonCfg.Ssid, tmpbuf, pAd->CommonCfg.SsidLen);
- pAd->MlmeAux.AutoReconnectSsidLen = pAd->CommonCfg.SsidLen;
- NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, NDIS_802_11_LENGTH_SSID);
- NdisMoveMemory(pAd->MlmeAux.AutoReconnectSsid, tmpbuf, pAd->MlmeAux.AutoReconnectSsidLen);
- pAd->MlmeAux.SsidLen = pAd->CommonCfg.SsidLen;
- NdisZeroMemory(pAd->MlmeAux.Ssid, NDIS_802_11_LENGTH_SSID);
- NdisMoveMemory(pAd->MlmeAux.Ssid, tmpbuf, pAd->MlmeAux.SsidLen);
- DBGPRINT(RT_DEBUG_TRACE, ("%s::(SSID=%s)\n", __func__, tmpbuf));
- }
- }
- }
-
- {
- //NetworkType
- if (RTMPGetKeyParameter("NetworkType", tmpbuf, 25, buffer))
- {
- pAd->bConfigChanged = TRUE;
- if (strcmp(tmpbuf, "Adhoc") == 0)
- pAd->StaCfg.BssType = BSS_ADHOC;
- else //Default Infrastructure mode
- pAd->StaCfg.BssType = BSS_INFRA;
- // Reset Ralink supplicant to not use, it will be set to start when UI set PMK key
- pAd->StaCfg.WpaState = SS_NOTUSE;
- DBGPRINT(RT_DEBUG_TRACE, ("%s::(NetworkType=%d)\n", __func__, pAd->StaCfg.BssType));
- }
- }
-
- //Channel
- if(RTMPGetKeyParameter("Channel", tmpbuf, 10, buffer))
- {
- pAd->CommonCfg.Channel = (UCHAR) simple_strtol(tmpbuf, 0, 10);
- DBGPRINT(RT_DEBUG_TRACE, ("Channel=%d\n", pAd->CommonCfg.Channel));
- }
- //WirelessMode
- if(RTMPGetKeyParameter("WirelessMode", tmpbuf, 10, buffer))
- {
- int value = 0, maxPhyMode = PHY_11G;
-
- maxPhyMode = PHY_11N_5G;
-
- value = simple_strtol(tmpbuf, 0, 10);
-
- if (value <= maxPhyMode)
- {
- pAd->CommonCfg.PhyMode = value;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("PhyMode=%d\n", pAd->CommonCfg.PhyMode));
- }
- //BasicRate
- if(RTMPGetKeyParameter("BasicRate", tmpbuf, 10, buffer))
- {
- pAd->CommonCfg.BasicRateBitmap = (ULONG) simple_strtol(tmpbuf, 0, 10);
- DBGPRINT(RT_DEBUG_TRACE, ("BasicRate=%ld\n", pAd->CommonCfg.BasicRateBitmap));
- }
- //BeaconPeriod
- if(RTMPGetKeyParameter("BeaconPeriod", tmpbuf, 10, buffer))
- {
- pAd->CommonCfg.BeaconPeriod = (USHORT) simple_strtol(tmpbuf, 0, 10);
- DBGPRINT(RT_DEBUG_TRACE, ("BeaconPeriod=%d\n", pAd->CommonCfg.BeaconPeriod));
- }
- //TxPower
- if(RTMPGetKeyParameter("TxPower", tmpbuf, 10, buffer))
- {
- pAd->CommonCfg.TxPowerPercentage = (ULONG) simple_strtol(tmpbuf, 0, 10);
-
- pAd->CommonCfg.TxPowerDefault = pAd->CommonCfg.TxPowerPercentage;
-
- DBGPRINT(RT_DEBUG_TRACE, ("TxPower=%ld\n", pAd->CommonCfg.TxPowerPercentage));
- }
- //BGProtection
- if(RTMPGetKeyParameter("BGProtection", tmpbuf, 10, buffer))
- {
- switch (simple_strtol(tmpbuf, 0, 10))
- {
- case 1: //Always On
- pAd->CommonCfg.UseBGProtection = 1;
- break;
- case 2: //Always OFF
- pAd->CommonCfg.UseBGProtection = 2;
- break;
- case 0: //AUTO
- default:
- pAd->CommonCfg.UseBGProtection = 0;
- break;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("BGProtection=%ld\n", pAd->CommonCfg.UseBGProtection));
- }
- //OLBCDetection
- if(RTMPGetKeyParameter("DisableOLBC", tmpbuf, 10, buffer))
- {
- switch (simple_strtol(tmpbuf, 0, 10))
- {
- case 1: //disable OLBC Detection
- pAd->CommonCfg.DisableOLBCDetect = 1;
- break;
- case 0: //enable OLBC Detection
- pAd->CommonCfg.DisableOLBCDetect = 0;
- break;
- default:
- pAd->CommonCfg.DisableOLBCDetect= 0;
- break;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("OLBCDetection=%ld\n", pAd->CommonCfg.DisableOLBCDetect));
- }
- //TxPreamble
- if(RTMPGetKeyParameter("TxPreamble", tmpbuf, 10, buffer))
- {
- switch (simple_strtol(tmpbuf, 0, 10))
- {
- case Rt802_11PreambleShort:
- pAd->CommonCfg.TxPreamble = Rt802_11PreambleShort;
- break;
- case Rt802_11PreambleLong:
- default:
- pAd->CommonCfg.TxPreamble = Rt802_11PreambleLong;
- break;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("TxPreamble=%ld\n", pAd->CommonCfg.TxPreamble));
- }
- //RTSThreshold
- if(RTMPGetKeyParameter("RTSThreshold", tmpbuf, 10, buffer))
- {
- RtsThresh = simple_strtol(tmpbuf, 0, 10);
- if( (RtsThresh >= 1) && (RtsThresh <= MAX_RTS_THRESHOLD) )
- pAd->CommonCfg.RtsThreshold = (USHORT)RtsThresh;
- else
- pAd->CommonCfg.RtsThreshold = MAX_RTS_THRESHOLD;
-
- DBGPRINT(RT_DEBUG_TRACE, ("RTSThreshold=%d\n", pAd->CommonCfg.RtsThreshold));
- }
- //FragThreshold
- if(RTMPGetKeyParameter("FragThreshold", tmpbuf, 10, buffer))
- {
- FragThresh = simple_strtol(tmpbuf, 0, 10);
- pAd->CommonCfg.bUseZeroToDisableFragment = FALSE;
-
- if (FragThresh > MAX_FRAG_THRESHOLD || FragThresh < MIN_FRAG_THRESHOLD)
- { //illegal FragThresh so we set it to default
- pAd->CommonCfg.FragmentThreshold = MAX_FRAG_THRESHOLD;
- pAd->CommonCfg.bUseZeroToDisableFragment = TRUE;
- }
- else if (FragThresh % 2 == 1)
- {
- // The length of each fragment shall always be an even number of octets, except for the last fragment
- // of an MSDU or MMPDU, which may be either an even or an odd number of octets.
- pAd->CommonCfg.FragmentThreshold = (USHORT)(FragThresh - 1);
- }
- else
- {
- pAd->CommonCfg.FragmentThreshold = (USHORT)FragThresh;
- }
- //pAd->CommonCfg.AllowFragSize = (pAd->CommonCfg.FragmentThreshold) - LENGTH_802_11 - LENGTH_CRC;
- DBGPRINT(RT_DEBUG_TRACE, ("FragThreshold=%d\n", pAd->CommonCfg.FragmentThreshold));
- }
- //TxBurst
- if(RTMPGetKeyParameter("TxBurst", tmpbuf, 10, buffer))
- {
- if(simple_strtol(tmpbuf, 0, 10) != 0) //Enable
- pAd->CommonCfg.bEnableTxBurst = TRUE;
- else //Disable
- pAd->CommonCfg.bEnableTxBurst = FALSE;
- DBGPRINT(RT_DEBUG_TRACE, ("TxBurst=%d\n", pAd->CommonCfg.bEnableTxBurst));
- }
-
-#ifdef AGGREGATION_SUPPORT
- //PktAggregate
- if(RTMPGetKeyParameter("PktAggregate", tmpbuf, 10, buffer))
- {
- if(simple_strtol(tmpbuf, 0, 10) != 0) //Enable
- pAd->CommonCfg.bAggregationCapable = TRUE;
- else //Disable
- pAd->CommonCfg.bAggregationCapable = FALSE;
-#ifdef PIGGYBACK_SUPPORT
- pAd->CommonCfg.bPiggyBackCapable = pAd->CommonCfg.bAggregationCapable;
-#endif // PIGGYBACK_SUPPORT //
- DBGPRINT(RT_DEBUG_TRACE, ("PktAggregate=%d\n", pAd->CommonCfg.bAggregationCapable));
- }
-#else
- pAd->CommonCfg.bAggregationCapable = FALSE;
- pAd->CommonCfg.bPiggyBackCapable = FALSE;
-#endif // AGGREGATION_SUPPORT //
-
- // WmmCapable
- rtmp_read_sta_wmm_parms_from_file(pAd, tmpbuf, buffer);
-
- //ShortSlot
- if(RTMPGetKeyParameter("ShortSlot", tmpbuf, 10, buffer))
- {
- if(simple_strtol(tmpbuf, 0, 10) != 0) //Enable
- pAd->CommonCfg.bUseShortSlotTime = TRUE;
- else //Disable
- pAd->CommonCfg.bUseShortSlotTime = FALSE;
-
- DBGPRINT(RT_DEBUG_TRACE, ("ShortSlot=%d\n", pAd->CommonCfg.bUseShortSlotTime));
- }
- //IEEE80211H
- if(RTMPGetKeyParameter("IEEE80211H", tmpbuf, 10, buffer))
- {
- for (i = 0, macptr = rstrtok(tmpbuf,";"); macptr; macptr = rstrtok(NULL,";"), i++)
- {
- if(simple_strtol(macptr, 0, 10) != 0) //Enable
- pAd->CommonCfg.bIEEE80211H = TRUE;
- else //Disable
- pAd->CommonCfg.bIEEE80211H = FALSE;
-
- DBGPRINT(RT_DEBUG_TRACE, ("IEEE80211H=%d\n", pAd->CommonCfg.bIEEE80211H));
- }
- }
- //CSPeriod
- if(RTMPGetKeyParameter("CSPeriod", tmpbuf, 10, buffer))
- {
- if(simple_strtol(tmpbuf, 0, 10) != 0)
- pAd->CommonCfg.RadarDetect.CSPeriod = simple_strtol(tmpbuf, 0, 10);
- else
- pAd->CommonCfg.RadarDetect.CSPeriod = 0;
-
- DBGPRINT(RT_DEBUG_TRACE, ("CSPeriod=%d\n", pAd->CommonCfg.RadarDetect.CSPeriod));
- }
-
- //RDRegion
- if(RTMPGetKeyParameter("RDRegion", tmpbuf, 128, buffer))
- {
- if ((strncmp(tmpbuf, "JAP_W53", 7) == 0) || (strncmp(tmpbuf, "jap_w53", 7) == 0))
- {
- pAd->CommonCfg.RadarDetect.RDDurRegion = JAP_W53;
- pAd->CommonCfg.RadarDetect.DfsSessionTime = 15;
- }
- else if ((strncmp(tmpbuf, "JAP_W56", 7) == 0) || (strncmp(tmpbuf, "jap_w56", 7) == 0))
- {
- pAd->CommonCfg.RadarDetect.RDDurRegion = JAP_W56;
- pAd->CommonCfg.RadarDetect.DfsSessionTime = 13;
- }
- else if ((strncmp(tmpbuf, "JAP", 3) == 0) || (strncmp(tmpbuf, "jap", 3) == 0))
- {
- pAd->CommonCfg.RadarDetect.RDDurRegion = JAP;
- pAd->CommonCfg.RadarDetect.DfsSessionTime = 5;
- }
- else if ((strncmp(tmpbuf, "FCC", 3) == 0) || (strncmp(tmpbuf, "fcc", 3) == 0))
- {
- pAd->CommonCfg.RadarDetect.RDDurRegion = FCC;
- pAd->CommonCfg.RadarDetect.DfsSessionTime = 5;
- }
- else if ((strncmp(tmpbuf, "CE", 2) == 0) || (strncmp(tmpbuf, "ce", 2) == 0))
- {
- pAd->CommonCfg.RadarDetect.RDDurRegion = CE;
- pAd->CommonCfg.RadarDetect.DfsSessionTime = 13;
- }
- else
- {
- pAd->CommonCfg.RadarDetect.RDDurRegion = CE;
- pAd->CommonCfg.RadarDetect.DfsSessionTime = 13;
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("RDRegion=%d\n", pAd->CommonCfg.RadarDetect.RDDurRegion));
- }
- else
- {
- pAd->CommonCfg.RadarDetect.RDDurRegion = CE;
- pAd->CommonCfg.RadarDetect.DfsSessionTime = 13;
- }
-
- //WirelessEvent
- if(RTMPGetKeyParameter("WirelessEvent", tmpbuf, 10, buffer))
- {
-#if WIRELESS_EXT >= 15
- if(simple_strtol(tmpbuf, 0, 10) != 0)
- pAd->CommonCfg.bWirelessEvent = simple_strtol(tmpbuf, 0, 10);
- else
- pAd->CommonCfg.bWirelessEvent = 0; // disable
-#else
- pAd->CommonCfg.bWirelessEvent = 0; // disable
-#endif
- DBGPRINT(RT_DEBUG_TRACE, ("WirelessEvent=%d\n", pAd->CommonCfg.bWirelessEvent));
- }
- if(RTMPGetKeyParameter("WiFiTest", tmpbuf, 10, buffer))
- {
- if(simple_strtol(tmpbuf, 0, 10) != 0)
- pAd->CommonCfg.bWiFiTest= simple_strtol(tmpbuf, 0, 10);
- else
- pAd->CommonCfg.bWiFiTest = 0; // disable
-
- DBGPRINT(RT_DEBUG_TRACE, ("WiFiTest=%d\n", pAd->CommonCfg.bWiFiTest));
- }
- //AuthMode
- if(RTMPGetKeyParameter("AuthMode", tmpbuf, 128, buffer))
- {
- {
- if ((strcmp(tmpbuf, "WEPAUTO") == 0) || (strcmp(tmpbuf, "wepauto") == 0))
- pAd->StaCfg.AuthMode = Ndis802_11AuthModeAutoSwitch;
- else if ((strcmp(tmpbuf, "SHARED") == 0) || (strcmp(tmpbuf, "shared") == 0))
- pAd->StaCfg.AuthMode = Ndis802_11AuthModeShared;
- else if ((strcmp(tmpbuf, "WPAPSK") == 0) || (strcmp(tmpbuf, "wpapsk") == 0))
- pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPAPSK;
- else if ((strcmp(tmpbuf, "WPANONE") == 0) || (strcmp(tmpbuf, "wpanone") == 0))
- pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPANone;
- else if ((strcmp(tmpbuf, "WPA2PSK") == 0) || (strcmp(tmpbuf, "wpa2psk") == 0))
- pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPA2PSK;
- else if ((strcmp(tmpbuf, "WPA") == 0) || (strcmp(tmpbuf, "wpa") == 0))
- pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPA;
- else if ((strcmp(tmpbuf, "WPA2") == 0) || (strcmp(tmpbuf, "wpa2") == 0))
- pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPA2;
- else
- pAd->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-
- pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-
- DBGPRINT(RT_DEBUG_TRACE, ("%s::(EncrypType=%d)\n", __func__, pAd->StaCfg.WepStatus));
- }
- }
- //EncrypType
- if(RTMPGetKeyParameter("EncrypType", tmpbuf, 128, buffer))
- {
- {
- if ((strcmp(tmpbuf, "WEP") == 0) || (strcmp(tmpbuf, "wep") == 0))
- pAd->StaCfg.WepStatus = Ndis802_11WEPEnabled;
- else if ((strcmp(tmpbuf, "TKIP") == 0) || (strcmp(tmpbuf, "tkip") == 0))
- pAd->StaCfg.WepStatus = Ndis802_11Encryption2Enabled;
- else if ((strcmp(tmpbuf, "AES") == 0) || (strcmp(tmpbuf, "aes") == 0))
- pAd->StaCfg.WepStatus = Ndis802_11Encryption3Enabled;
- else
- pAd->StaCfg.WepStatus = Ndis802_11WEPDisabled;
-
- // Update all wepstatus related
- pAd->StaCfg.PairCipher = pAd->StaCfg.WepStatus;
- pAd->StaCfg.GroupCipher = pAd->StaCfg.WepStatus;
- pAd->StaCfg.OrigWepStatus = pAd->StaCfg.WepStatus;
- pAd->StaCfg.bMixCipher = FALSE;
-
- DBGPRINT(RT_DEBUG_TRACE, ("%s::(EncrypType=%d)\n", __func__, pAd->StaCfg.WepStatus));
- }
- }
-
- {
- if(RTMPGetCriticalParameter("WPAPSK", tmpbuf, 512, buffer))
- {
- int err=0;
-
- tmpbuf[strlen(tmpbuf)] = '\0'; // make STA can process .$^& for WPAPSK input
-
- if ((pAd->StaCfg.AuthMode != Ndis802_11AuthModeWPAPSK) &&
- (pAd->StaCfg.AuthMode != Ndis802_11AuthModeWPA2PSK) &&
- (pAd->StaCfg.AuthMode != Ndis802_11AuthModeWPANone)
- )
- {
- err = 1;
- }
- else if ((strlen(tmpbuf) >= 8) && (strlen(tmpbuf) < 64))
- {
- PasswordHash((char *)tmpbuf, pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen, keyMaterial);
- NdisMoveMemory(pAd->StaCfg.PMK, keyMaterial, 32);
-
- }
- else if (strlen(tmpbuf) == 64)
- {
- AtoH(tmpbuf, keyMaterial, 32);
- NdisMoveMemory(pAd->StaCfg.PMK, keyMaterial, 32);
- }
- else
- {
- err = 1;
- DBGPRINT(RT_DEBUG_ERROR, ("%s::(WPAPSK key-string required 8 ~ 64 characters!)\n", __func__));
- }
-
- if (err == 0)
- {
- if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
- (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK))
- {
- // Start STA supplicant state machine
- pAd->StaCfg.WpaState = SS_START;
- }
- else if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
- {
- pAd->StaCfg.WpaState = SS_NOTUSE;
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("%s::(WPAPSK=%s)\n", __func__, tmpbuf));
- }
- }
- }
-
- //DefaultKeyID, KeyType, KeyStr
- rtmp_read_key_parms_from_file(pAd, tmpbuf, buffer);
-
- HTParametersHook(pAd, tmpbuf, buffer);
-
- {
- //PSMode
- if (RTMPGetKeyParameter("PSMode", tmpbuf, 10, buffer))
- {
- if (pAd->StaCfg.BssType == BSS_INFRA)
- {
- if ((strcmp(tmpbuf, "MAX_PSP") == 0) || (strcmp(tmpbuf, "max_psp") == 0))
- {
- // do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
- // to exclude certain situations.
- // MlmeSetPsm(pAd, PWR_SAVE);
- OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
- if (pAd->StaCfg.bWindowsACCAMEnable == FALSE)
- pAd->StaCfg.WindowsPowerMode = Ndis802_11PowerModeMAX_PSP;
- pAd->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeMAX_PSP;
- pAd->StaCfg.DefaultListenCount = 5;
- }
- else if ((strcmp(tmpbuf, "Fast_PSP") == 0) || (strcmp(tmpbuf, "fast_psp") == 0)
- || (strcmp(tmpbuf, "FAST_PSP") == 0))
- {
- // do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
- // to exclude certain situations.
- // MlmeSetPsmBit(pAd, PWR_SAVE);
- OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
- if (pAd->StaCfg.bWindowsACCAMEnable == FALSE)
- pAd->StaCfg.WindowsPowerMode = Ndis802_11PowerModeFast_PSP;
- pAd->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeFast_PSP;
- pAd->StaCfg.DefaultListenCount = 3;
- }
- else if ((strcmp(tmpbuf, "Legacy_PSP") == 0) || (strcmp(tmpbuf, "legacy_psp") == 0)
- || (strcmp(tmpbuf, "LEGACY_PSP") == 0))
- {
- // do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
- // to exclude certain situations.
- // MlmeSetPsmBit(pAd, PWR_SAVE);
- OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
- if (pAd->StaCfg.bWindowsACCAMEnable == FALSE)
- pAd->StaCfg.WindowsPowerMode = Ndis802_11PowerModeLegacy_PSP;
- pAd->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeLegacy_PSP;
- pAd->StaCfg.DefaultListenCount = 3;
- }
- else
- { //Default Ndis802_11PowerModeCAM
- // clear PSM bit immediately
- MlmeSetPsmBit(pAd, PWR_ACTIVE);
- OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
- if (pAd->StaCfg.bWindowsACCAMEnable == FALSE)
- pAd->StaCfg.WindowsPowerMode = Ndis802_11PowerModeCAM;
- pAd->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeCAM;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("PSMode=%ld\n", pAd->StaCfg.WindowsPowerMode));
- }
- }
- // FastRoaming
- if (RTMPGetKeyParameter("FastRoaming", tmpbuf, 32, buffer))
- {
- if (simple_strtol(tmpbuf, 0, 10) == 0)
- pAd->StaCfg.bFastRoaming = FALSE;
- else
- pAd->StaCfg.bFastRoaming = TRUE;
-
- DBGPRINT(RT_DEBUG_TRACE, ("FastRoaming=%d\n", pAd->StaCfg.bFastRoaming));
- }
- // RoamThreshold
- if (RTMPGetKeyParameter("RoamThreshold", tmpbuf, 32, buffer))
- {
- long lInfo = simple_strtol(tmpbuf, 0, 10);
-
- if (lInfo > 90 || lInfo < 60)
- pAd->StaCfg.dBmToRoam = -70;
- else
- pAd->StaCfg.dBmToRoam = (CHAR)(-1)*lInfo;
-
- DBGPRINT(RT_DEBUG_TRACE, ("RoamThreshold=%d dBm\n", pAd->StaCfg.dBmToRoam));
- }
-
- if(RTMPGetKeyParameter("TGnWifiTest", tmpbuf, 10, buffer))
- {
- if(simple_strtol(tmpbuf, 0, 10) == 0)
- pAd->StaCfg.bTGnWifiTest = FALSE;
- else
- pAd->StaCfg.bTGnWifiTest = TRUE;
- DBGPRINT(RT_DEBUG_TRACE, ("TGnWifiTest=%d\n", pAd->StaCfg.bTGnWifiTest));
- }
- }
-
-#ifdef RT30xx
- {
- if(RTMPGetKeyParameter("AntDiversity", tmpbuf, 10, buffer))
- {
- for (i = 0, macptr = rstrtok(tmpbuf,";"); macptr; macptr = rstrtok(NULL,";"), i++)
- {
- if(simple_strtol(macptr, 0, 10) != 0) //Enable
- pAd->CommonCfg.bRxAntDiversity = TRUE;
- else //Disable
- pAd->CommonCfg.bRxAntDiversity = FALSE;
-
- DBGPRINT(RT_DEBUG_ERROR, ("AntDiversity=%d\n", pAd->CommonCfg.bRxAntDiversity));
- }
- }
- }
-#endif // RT30xx //
- }
- }
- else
- {
- DBGPRINT(RT_DEBUG_TRACE, ("--> %s does not have a write method\n", src));
- }
-
- retval=filp_close(srcf,NULL);
-
- if (retval)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("--> Error %d closing %s\n", -retval, src));
- }
- }
- }
-
- set_fs(orgfs);
-
- kfree(buffer);
- kfree(tmpbuf);
-
- return (NDIS_STATUS_SUCCESS);
-}
-
-static void HTParametersHook(
- IN PRTMP_ADAPTER pAd,
- IN CHAR *pValueStr,
- IN CHAR *pInput)
-{
-
- INT Value;
-
- if (RTMPGetKeyParameter("HT_PROTECT", pValueStr, 25, pInput))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value == 0)
- {
- pAd->CommonCfg.bHTProtect = FALSE;
- }
- else
- {
- pAd->CommonCfg.bHTProtect = TRUE;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: Protection = %s\n", (Value==0) ? "Disable" : "Enable"));
- }
-
- if (RTMPGetKeyParameter("HT_MIMOPSEnable", pValueStr, 25, pInput))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value == 0)
- {
- pAd->CommonCfg.bMIMOPSEnable = FALSE;
- }
- else
- {
- pAd->CommonCfg.bMIMOPSEnable = TRUE;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: MIMOPSEnable = %s\n", (Value==0) ? "Disable" : "Enable"));
- }
-
-
- if (RTMPGetKeyParameter("HT_MIMOPSMode", pValueStr, 25, pInput))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value > MMPS_ENABLE)
- {
- pAd->CommonCfg.BACapability.field.MMPSmode = MMPS_ENABLE;
- }
- else
- {
- //TODO: add mimo power saving mechanism
- pAd->CommonCfg.BACapability.field.MMPSmode = MMPS_ENABLE;
- //pAd->CommonCfg.BACapability.field.MMPSmode = Value;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: MIMOPS Mode = %d\n", Value));
- }
-
- if (RTMPGetKeyParameter("HT_BADecline", pValueStr, 25, pInput))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value == 0)
- {
- pAd->CommonCfg.bBADecline = FALSE;
- }
- else
- {
- pAd->CommonCfg.bBADecline = TRUE;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: BA Decline = %s\n", (Value==0) ? "Disable" : "Enable"));
- }
-
-
- if (RTMPGetKeyParameter("HT_DisableReordering", pValueStr, 25, pInput))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value == 0)
- {
- pAd->CommonCfg.bDisableReordering = FALSE;
- }
- else
- {
- pAd->CommonCfg.bDisableReordering = TRUE;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: DisableReordering = %s\n", (Value==0) ? "Disable" : "Enable"));
- }
-
- if (RTMPGetKeyParameter("HT_AutoBA", pValueStr, 25, pInput))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value == 0)
- {
- pAd->CommonCfg.BACapability.field.AutoBA = FALSE;
-#ifdef RT30xx
- pAd->CommonCfg.BACapability.field.Policy = BA_NOTUSE;
-#endif
- }
- else
- {
- pAd->CommonCfg.BACapability.field.AutoBA = TRUE;
-#ifdef RT30xx
- pAd->CommonCfg.BACapability.field.Policy = IMMED_BA;
-#endif
- }
- pAd->CommonCfg.REGBACapability.field.AutoBA = pAd->CommonCfg.BACapability.field.AutoBA;
-#ifdef RT30xx
- pAd->CommonCfg.REGBACapability.field.Policy = pAd->CommonCfg.BACapability.field.Policy;
-#endif
- DBGPRINT(RT_DEBUG_TRACE, ("HT: Auto BA = %s\n", (Value==0) ? "Disable" : "Enable"));
- }
-
- // Tx_+HTC frame
- if (RTMPGetKeyParameter("HT_HTC", pValueStr, 25, pInput))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value == 0)
- {
- pAd->HTCEnable = FALSE;
- }
- else
- {
- pAd->HTCEnable = TRUE;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: Tx +HTC frame = %s\n", (Value==0) ? "Disable" : "Enable"));
- }
-
- // Enable HT Link Adaptation Control
- if (RTMPGetKeyParameter("HT_LinkAdapt", pValueStr, 25, pInput))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value == 0)
- {
- pAd->bLinkAdapt = FALSE;
- }
- else
- {
- pAd->HTCEnable = TRUE;
- pAd->bLinkAdapt = TRUE;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: Link Adaptation Control = %s\n", (Value==0) ? "Disable" : "Enable(+HTC)"));
- }
-
- // Reverse Direction Mechanism
- if (RTMPGetKeyParameter("HT_RDG", pValueStr, 25, pInput))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value == 0)
- {
- pAd->CommonCfg.bRdg = FALSE;
- }
- else
- {
- pAd->HTCEnable = TRUE;
- pAd->CommonCfg.bRdg = TRUE;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: RDG = %s\n", (Value==0) ? "Disable" : "Enable(+HTC)"));
- }
-
-
-
-
- // Tx A-MSUD ?
- if (RTMPGetKeyParameter("HT_AMSDU", pValueStr, 25, pInput))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value == 0)
- {
- pAd->CommonCfg.BACapability.field.AmsduEnable = FALSE;
- }
- else
- {
- pAd->CommonCfg.BACapability.field.AmsduEnable = TRUE;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: Tx A-MSDU = %s\n", (Value==0) ? "Disable" : "Enable"));
- }
-
- // MPDU Density
- if (RTMPGetKeyParameter("HT_MpduDensity", pValueStr, 25, pInput))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value <=7 && Value >= 0)
- {
- pAd->CommonCfg.BACapability.field.MpduDensity = Value;
- DBGPRINT(RT_DEBUG_TRACE, ("HT: MPDU Density = %d\n", Value));
- }
- else
- {
- pAd->CommonCfg.BACapability.field.MpduDensity = 4;
- DBGPRINT(RT_DEBUG_TRACE, ("HT: MPDU Density = %d (Default)\n", 4));
- }
- }
-
- // Max Rx BA Window Size
- if (RTMPGetKeyParameter("HT_BAWinSize", pValueStr, 25, pInput))
- {
- Value = simple_strtol(pValueStr, 0, 10);
-
- if (Value >=1 && Value <= 64)
- {
- pAd->CommonCfg.REGBACapability.field.RxBAWinLimit = Value;
- pAd->CommonCfg.BACapability.field.RxBAWinLimit = Value;
- DBGPRINT(RT_DEBUG_TRACE, ("HT: BA Windw Size = %d\n", Value));
- }
- else
- {
- pAd->CommonCfg.REGBACapability.field.RxBAWinLimit = 64;
- pAd->CommonCfg.BACapability.field.RxBAWinLimit = 64;
- DBGPRINT(RT_DEBUG_TRACE, ("HT: BA Windw Size = 64 (Defualt)\n"));
- }
-
- }
-
- // Guard Interval
- if (RTMPGetKeyParameter("HT_GI", pValueStr, 25, pInput))
- {
- Value = simple_strtol(pValueStr, 0, 10);
-
- if (Value == GI_400)
- {
- pAd->CommonCfg.RegTransmitSetting.field.ShortGI = GI_400;
- }
- else
- {
- pAd->CommonCfg.RegTransmitSetting.field.ShortGI = GI_800;
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("HT: Guard Interval = %s\n", (Value==GI_400) ? "400" : "800" ));
- }
-
- // HT Operation Mode : Mixed Mode , Green Field
- if (RTMPGetKeyParameter("HT_OpMode", pValueStr, 25, pInput))
- {
- Value = simple_strtol(pValueStr, 0, 10);
-
- if (Value == HTMODE_GF)
- {
-
- pAd->CommonCfg.RegTransmitSetting.field.HTMODE = HTMODE_GF;
- }
- else
- {
- pAd->CommonCfg.RegTransmitSetting.field.HTMODE = HTMODE_MM;
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("HT: Operate Mode = %s\n", (Value==HTMODE_GF) ? "Green Field" : "Mixed Mode" ));
- }
-
- // Fixed Tx mode : CCK, OFDM
- if (RTMPGetKeyParameter("FixedTxMode", pValueStr, 25, pInput))
- {
- UCHAR fix_tx_mode;
-
- {
- fix_tx_mode = FIXED_TXMODE_HT;
-
- if (strcmp(pValueStr, "OFDM") == 0 || strcmp(pValueStr, "ofdm") == 0)
- {
- fix_tx_mode = FIXED_TXMODE_OFDM;
- }
- else if (strcmp(pValueStr, "CCK") == 0 || strcmp(pValueStr, "cck") == 0)
- {
- fix_tx_mode = FIXED_TXMODE_CCK;
- }
- else if (strcmp(pValueStr, "HT") == 0 || strcmp(pValueStr, "ht") == 0)
- {
- fix_tx_mode = FIXED_TXMODE_HT;
- }
- else
- {
- Value = simple_strtol(pValueStr, 0, 10);
- // 1 : CCK
- // 2 : OFDM
- // otherwise : HT
- if (Value == FIXED_TXMODE_CCK || Value == FIXED_TXMODE_OFDM)
- fix_tx_mode = Value;
- else
- fix_tx_mode = FIXED_TXMODE_HT;
- }
-
- pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode = fix_tx_mode;
- DBGPRINT(RT_DEBUG_TRACE, ("Fixed Tx Mode = %d\n", fix_tx_mode));
-
- }
- }
-
-
- // Channel Width
- if (RTMPGetKeyParameter("HT_BW", pValueStr, 25, pInput))
- {
- Value = simple_strtol(pValueStr, 0, 10);
-
- if (Value == BW_40)
- {
- pAd->CommonCfg.RegTransmitSetting.field.BW = BW_40;
- }
- else
- {
- pAd->CommonCfg.RegTransmitSetting.field.BW = BW_20;
- }
-
-#ifdef MCAST_RATE_SPECIFIC
- pAd->CommonCfg.MCastPhyMode.field.BW = pAd->CommonCfg.RegTransmitSetting.field.BW;
-#endif // MCAST_RATE_SPECIFIC //
-
- DBGPRINT(RT_DEBUG_TRACE, ("HT: Channel Width = %s\n", (Value==BW_40) ? "40 MHz" : "20 MHz" ));
- }
-
- if (RTMPGetKeyParameter("HT_EXTCHA", pValueStr, 25, pInput))
- {
- Value = simple_strtol(pValueStr, 0, 10);
-
- if (Value == 0)
- {
-
- pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_BELOW;
- }
- else
- {
- pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_ABOVE;
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("HT: Ext Channel = %s\n", (Value==0) ? "BELOW" : "ABOVE" ));
- }
-
- // MSC
- if (RTMPGetKeyParameter("HT_MCS", pValueStr, 50, pInput))
- {
- {
- Value = simple_strtol(pValueStr, 0, 10);
-
- if ((Value >= 0 && Value <= 23) || (Value == 32)) // 3*3
- {
- pAd->StaCfg.DesiredTransmitSetting.field.MCS = Value;
- pAd->StaCfg.bAutoTxRateSwitch = FALSE;
- DBGPRINT(RT_DEBUG_TRACE, ("HT: MCS = %d\n", pAd->StaCfg.DesiredTransmitSetting.field.MCS));
- }
- else
- {
- pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
- pAd->StaCfg.bAutoTxRateSwitch = TRUE;
- DBGPRINT(RT_DEBUG_TRACE, ("HT: MCS = AUTO\n"));
- }
- }
- }
-
- // STBC
- if (RTMPGetKeyParameter("HT_STBC", pValueStr, 25, pInput))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value == STBC_USE)
- {
- pAd->CommonCfg.RegTransmitSetting.field.STBC = STBC_USE;
- }
- else
- {
- pAd->CommonCfg.RegTransmitSetting.field.STBC = STBC_NONE;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: STBC = %d\n", pAd->CommonCfg.RegTransmitSetting.field.STBC));
- }
-
- // 40_Mhz_Intolerant
- if (RTMPGetKeyParameter("HT_40MHZ_INTOLERANT", pValueStr, 25, pInput))
- {
- Value = simple_strtol(pValueStr, 0, 10);
- if (Value == 0)
- {
- pAd->CommonCfg.bForty_Mhz_Intolerant = FALSE;
- }
- else
- {
- pAd->CommonCfg.bForty_Mhz_Intolerant = TRUE;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: 40MHZ INTOLERANT = %d\n", pAd->CommonCfg.bForty_Mhz_Intolerant));
- }
- //HT_TxStream
- if(RTMPGetKeyParameter("HT_TxStream", pValueStr, 10, pInput))
- {
- switch (simple_strtol(pValueStr, 0, 10))
- {
- case 1:
- pAd->CommonCfg.TxStream = 1;
- break;
- case 2:
- pAd->CommonCfg.TxStream = 2;
- break;
- case 3: // 3*3
- default:
- pAd->CommonCfg.TxStream = 3;
-
- if (pAd->MACVersion < RALINK_2883_VERSION)
- pAd->CommonCfg.TxStream = 2; // only 2 tx streams for RT2860 series
- break;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: Tx Stream = %d\n", pAd->CommonCfg.TxStream));
- }
- //HT_RxStream
- if(RTMPGetKeyParameter("HT_RxStream", pValueStr, 10, pInput))
- {
- switch (simple_strtol(pValueStr, 0, 10))
- {
- case 1:
- pAd->CommonCfg.RxStream = 1;
- break;
- case 2:
- pAd->CommonCfg.RxStream = 2;
- break;
- case 3:
- default:
- pAd->CommonCfg.RxStream = 3;
-
- if (pAd->MACVersion < RALINK_2883_VERSION)
- pAd->CommonCfg.RxStream = 2; // only 2 rx streams for RT2860 series
- break;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("HT: Rx Stream = %d\n", pAd->CommonCfg.RxStream));
- }
-
-}
+#include "../rt2860/rt_profile.c"
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
-
- Module Name:
- rtmp.h
-
- Abstract:
- Miniport generic portion header file
-
- Revision History:
- Who When What
- -------- ---------- ----------------------------------------------
- Paul Lin 2002-08-01 created
- James Tan 2002-09-06 modified (Revise NTCRegTable)
- John Chang 2004-09-06 modified for RT2600
-*/
-#ifndef __RTMP_H__
-#define __RTMP_H__
-
-#include "link_list.h"
-#include "spectrum_def.h"
-
-#include "aironet.h"
-
-//#define DBG_DIAGNOSE 1
-
-#define VIRTUAL_IF_INC(__pAd) ((__pAd)->VirtualIfCnt++)
-#define VIRTUAL_IF_DEC(__pAd) ((__pAd)->VirtualIfCnt--)
-#define VIRTUAL_IF_NUM(__pAd) ((__pAd)->VirtualIfCnt)
-
-#ifdef RT2870
-////////////////////////////////////////////////////////////////////////////
-// The TX_BUFFER structure forms the transmitted USB packet to the device
-////////////////////////////////////////////////////////////////////////////
-typedef struct __TX_BUFFER{
- union {
- UCHAR WirelessPacket[TX_BUFFER_NORMSIZE];
- HEADER_802_11 NullFrame;
- PSPOLL_FRAME PsPollPacket;
- RTS_FRAME RTSFrame;
- }field;
- UCHAR Aggregation[4]; //Buffer for save Aggregation size.
-} TX_BUFFER, *PTX_BUFFER;
-
-typedef struct __HTTX_BUFFER{
- union {
- UCHAR WirelessPacket[MAX_TXBULK_SIZE];
- HEADER_802_11 NullFrame;
- PSPOLL_FRAME PsPollPacket;
- RTS_FRAME RTSFrame;
- }field;
- UCHAR Aggregation[4]; //Buffer for save Aggregation size.
-} HTTX_BUFFER, *PHTTX_BUFFER;
-
-
-// used to track driver-generated write irps
-typedef struct _TX_CONTEXT
-{
- PVOID pAd; //Initialized in MiniportInitialize
- PURB pUrb; //Initialized in MiniportInitialize
- PIRP pIrp; //used to cancel pending bulk out.
- //Initialized in MiniportInitialize
- PTX_BUFFER TransferBuffer; //Initialized in MiniportInitialize
- ULONG BulkOutSize;
- UCHAR BulkOutPipeId;
- UCHAR SelfIdx;
- BOOLEAN InUse;
- BOOLEAN bWaitingBulkOut; // at least one packet is in this TxContext, ready for making IRP anytime.
- BOOLEAN bFullForBulkOut; // all tx buffer are full , so waiting for tx bulkout.
- BOOLEAN IRPPending;
- BOOLEAN LastOne;
- BOOLEAN bAggregatible;
- UCHAR Header_802_3[LENGTH_802_3];
- UCHAR Rsv[2];
- ULONG DataOffset;
- UINT TxRate;
- dma_addr_t data_dma; // urb dma on linux
-
-} TX_CONTEXT, *PTX_CONTEXT, **PPTX_CONTEXT;
-
-
-// used to track driver-generated write irps
-typedef struct _HT_TX_CONTEXT
-{
- PVOID pAd; //Initialized in MiniportInitialize
- PURB pUrb; //Initialized in MiniportInitialize
- PIRP pIrp; //used to cancel pending bulk out.
- //Initialized in MiniportInitialize
- PHTTX_BUFFER TransferBuffer; //Initialized in MiniportInitialize
- ULONG BulkOutSize; // Indicate the total bulk-out size in bytes in one bulk-transmission
- UCHAR BulkOutPipeId;
- BOOLEAN IRPPending;
- BOOLEAN LastOne;
- BOOLEAN bCurWriting;
- BOOLEAN bRingEmpty;
- BOOLEAN bCopySavePad;
- UCHAR SavedPad[8];
- UCHAR Header_802_3[LENGTH_802_3];
- ULONG CurWritePosition; // Indicate the buffer offset which packet will be inserted start from.
- ULONG CurWriteRealPos; // Indicate the buffer offset which packet now are writing to.
- ULONG NextBulkOutPosition; // Indicate the buffer start offset of a bulk-transmission
- ULONG ENextBulkOutPosition; // Indicate the buffer end offset of a bulk-transmission
- UINT TxRate;
- dma_addr_t data_dma; // urb dma on linux
-} HT_TX_CONTEXT, *PHT_TX_CONTEXT, **PPHT_TX_CONTEXT;
-
-
-//
-// Structure to keep track of receive packets and buffers to indicate
-// receive data to the protocol.
-//
-typedef struct _RX_CONTEXT
-{
- PUCHAR TransferBuffer;
- PVOID pAd;
- PIRP pIrp;//used to cancel pending bulk in.
- PURB pUrb;
- //These 2 Boolean shouldn't both be 1 at the same time.
- ULONG BulkInOffset; // number of packets waiting for reordering .
- BOOLEAN bRxHandling; // Notify this packet is being process now.
- BOOLEAN InUse; // USB Hardware Occupied. Wait for USB HW to put packet.
- BOOLEAN Readable; // Receive Complete back. OK for driver to indicate receiving packet.
- BOOLEAN IRPPending; // TODO: To be removed
- atomic_t IrpLock;
- NDIS_SPIN_LOCK RxContextLock;
- dma_addr_t data_dma; // urb dma on linux
-} RX_CONTEXT, *PRX_CONTEXT;
-#endif // RT2870 //
-
-
-//
-// NDIS Version definitions
-//
-#ifdef NDIS50_MINIPORT
-#define RTMP_NDIS_MAJOR_VERSION 5
-#define RTMP_NDIS_MINOR_VERSION 0
-#endif
-
-#ifdef NDIS51_MINIPORT
-#define RTMP_NDIS_MAJOR_VERSION 5
-#define RTMP_NDIS_MINOR_VERSION 1
-#endif
-
-extern char NIC_VENDOR_DESC[];
-extern int NIC_VENDOR_DESC_LEN;
-
-extern unsigned char SNAP_AIRONET[];
-extern unsigned char CipherSuiteCiscoCCKM[];
-extern unsigned char CipherSuiteCiscoCCKMLen;
-extern unsigned char CipherSuiteCiscoCCKM24[];
-extern unsigned char CipherSuiteCiscoCCKM24Len;
-extern unsigned char CipherSuiteCCXTkip[];
-extern unsigned char CipherSuiteCCXTkipLen;
-extern unsigned char CISCO_OUI[];
-extern UCHAR BaSizeArray[4];
-
-extern UCHAR BROADCAST_ADDR[MAC_ADDR_LEN];
-extern UCHAR MULTICAST_ADDR[MAC_ADDR_LEN];
-extern UCHAR ZERO_MAC_ADDR[MAC_ADDR_LEN];
-extern ULONG BIT32[32];
-extern UCHAR BIT8[8];
-extern char* CipherName[];
-extern char* MCSToMbps[];
-extern UCHAR RxwiMCSToOfdmRate[12];
-extern UCHAR SNAP_802_1H[6];
-extern UCHAR SNAP_BRIDGE_TUNNEL[6];
-extern UCHAR SNAP_AIRONET[8];
-extern UCHAR CKIP_LLC_SNAP[8];
-extern UCHAR EAPOL_LLC_SNAP[8];
-extern UCHAR EAPOL[2];
-extern UCHAR IPX[2];
-extern UCHAR APPLE_TALK[2];
-extern UCHAR RateIdToPlcpSignal[12]; // see IEEE802.11a-1999 p.14
-extern UCHAR OfdmRateToRxwiMCS[];
-extern UCHAR OfdmSignalToRateId[16] ;
-extern UCHAR default_cwmin[4];
-extern UCHAR default_cwmax[4];
-extern UCHAR default_sta_aifsn[4];
-extern UCHAR MapUserPriorityToAccessCategory[8];
-
-extern USHORT RateUpPER[];
-extern USHORT RateDownPER[];
-extern UCHAR Phy11BNextRateDownward[];
-extern UCHAR Phy11BNextRateUpward[];
-extern UCHAR Phy11BGNextRateDownward[];
-extern UCHAR Phy11BGNextRateUpward[];
-extern UCHAR Phy11ANextRateDownward[];
-extern UCHAR Phy11ANextRateUpward[];
-extern CHAR RssiSafeLevelForTxRate[];
-extern UCHAR RateIdToMbps[];
-extern USHORT RateIdTo500Kbps[];
-
-extern UCHAR CipherSuiteWpaNoneTkip[];
-extern UCHAR CipherSuiteWpaNoneTkipLen;
-
-extern UCHAR CipherSuiteWpaNoneAes[];
-extern UCHAR CipherSuiteWpaNoneAesLen;
-
-extern UCHAR SsidIe;
-extern UCHAR SupRateIe;
-extern UCHAR ExtRateIe;
-
-extern UCHAR HtCapIe;
-extern UCHAR AddHtInfoIe;
-extern UCHAR NewExtChanIe;
-
-extern UCHAR ErpIe;
-extern UCHAR DsIe;
-extern UCHAR TimIe;
-extern UCHAR WpaIe;
-extern UCHAR Wpa2Ie;
-extern UCHAR IbssIe;
-extern UCHAR Ccx2Ie;
-#ifdef RT30xx
-extern UCHAR WapiIe;
-#endif
-
-extern UCHAR WPA_OUI[];
-extern UCHAR RSN_OUI[];
-#ifdef RT30xx
-extern UCHAR WAPI_OUI[];
-#endif
-extern UCHAR WME_INFO_ELEM[];
-extern UCHAR WME_PARM_ELEM[];
-extern UCHAR Ccx2QosInfo[];
-extern UCHAR Ccx2IeInfo[];
-extern UCHAR RALINK_OUI[];
-extern UCHAR PowerConstraintIE[];
-
-
-extern UCHAR RateSwitchTable[];
-extern UCHAR RateSwitchTable11B[];
-extern UCHAR RateSwitchTable11G[];
-extern UCHAR RateSwitchTable11BG[];
-
-extern UCHAR RateSwitchTable11BGN1S[];
-extern UCHAR RateSwitchTable11BGN2S[];
-extern UCHAR RateSwitchTable11BGN2SForABand[];
-extern UCHAR RateSwitchTable11N1S[];
-extern UCHAR RateSwitchTable11N2S[];
-extern UCHAR RateSwitchTable11N2SForABand[];
-
-extern UCHAR PRE_N_HT_OUI[];
-
-#define MAXSEQ (0xFFF)
-
-struct reordering_mpdu
-{
- struct reordering_mpdu *next;
- PNDIS_PACKET pPacket; /* coverted to 802.3 frame */
- int Sequence; /* sequence number of MPDU */
- BOOLEAN bAMSDU;
-};
-
-struct reordering_list
-{
- struct reordering_mpdu *next;
- int qlen;
-};
-
-struct reordering_mpdu_pool
-{
- PVOID mem;
- NDIS_SPIN_LOCK lock;
- struct reordering_list freelist;
-};
-
-typedef struct _RSSI_SAMPLE {
- CHAR LastRssi0; // last received RSSI
- CHAR LastRssi1; // last received RSSI
- CHAR LastRssi2; // last received RSSI
- CHAR AvgRssi0;
- CHAR AvgRssi1;
- CHAR AvgRssi2;
- SHORT AvgRssi0X8;
- SHORT AvgRssi1X8;
- SHORT AvgRssi2X8;
-} RSSI_SAMPLE;
-
-//
-// Queue structure and macros
-//
-typedef struct _QUEUE_ENTRY {
- struct _QUEUE_ENTRY *Next;
-} QUEUE_ENTRY, *PQUEUE_ENTRY;
-
-// Queue structure
-typedef struct _QUEUE_HEADER {
- PQUEUE_ENTRY Head;
- PQUEUE_ENTRY Tail;
- ULONG Number;
-} QUEUE_HEADER, *PQUEUE_HEADER;
-
-#define InitializeQueueHeader(QueueHeader) \
-{ \
- (QueueHeader)->Head = (QueueHeader)->Tail = NULL; \
- (QueueHeader)->Number = 0; \
-}
-
-#define RemoveHeadQueue(QueueHeader) \
-(QueueHeader)->Head; \
-{ \
- PQUEUE_ENTRY pNext; \
- if ((QueueHeader)->Head != NULL) \
- { \
- pNext = (QueueHeader)->Head->Next; \
- (QueueHeader)->Head = pNext; \
- if (pNext == NULL) \
- (QueueHeader)->Tail = NULL; \
- (QueueHeader)->Number--; \
- } \
-}
-
-#define InsertHeadQueue(QueueHeader, QueueEntry) \
-{ \
- ((PQUEUE_ENTRY)QueueEntry)->Next = (QueueHeader)->Head; \
- (QueueHeader)->Head = (PQUEUE_ENTRY)(QueueEntry); \
- if ((QueueHeader)->Tail == NULL) \
- (QueueHeader)->Tail = (PQUEUE_ENTRY)(QueueEntry); \
- (QueueHeader)->Number++; \
-}
-
-#define InsertTailQueue(QueueHeader, QueueEntry) \
-{ \
- ((PQUEUE_ENTRY)QueueEntry)->Next = NULL; \
- if ((QueueHeader)->Tail) \
- (QueueHeader)->Tail->Next = (PQUEUE_ENTRY)(QueueEntry); \
- else \
- (QueueHeader)->Head = (PQUEUE_ENTRY)(QueueEntry); \
- (QueueHeader)->Tail = (PQUEUE_ENTRY)(QueueEntry); \
- (QueueHeader)->Number++; \
-}
-
-//
-// Macros for flag and ref count operations
-//
-#define RTMP_SET_FLAG(_M, _F) ((_M)->Flags |= (_F))
-#define RTMP_CLEAR_FLAG(_M, _F) ((_M)->Flags &= ~(_F))
-#define RTMP_CLEAR_FLAGS(_M) ((_M)->Flags = 0)
-#define RTMP_TEST_FLAG(_M, _F) (((_M)->Flags & (_F)) != 0)
-#define RTMP_TEST_FLAGS(_M, _F) (((_M)->Flags & (_F)) == (_F))
-
-#define OPSTATUS_SET_FLAG(_pAd, _F) ((_pAd)->CommonCfg.OpStatusFlags |= (_F))
-#define OPSTATUS_CLEAR_FLAG(_pAd, _F) ((_pAd)->CommonCfg.OpStatusFlags &= ~(_F))
-#define OPSTATUS_TEST_FLAG(_pAd, _F) (((_pAd)->CommonCfg.OpStatusFlags & (_F)) != 0)
-
-#define CLIENT_STATUS_SET_FLAG(_pEntry,_F) ((_pEntry)->ClientStatusFlags |= (_F))
-#define CLIENT_STATUS_CLEAR_FLAG(_pEntry,_F) ((_pEntry)->ClientStatusFlags &= ~(_F))
-#define CLIENT_STATUS_TEST_FLAG(_pEntry,_F) (((_pEntry)->ClientStatusFlags & (_F)) != 0)
-
-#define RX_FILTER_SET_FLAG(_pAd, _F) ((_pAd)->CommonCfg.PacketFilter |= (_F))
-#define RX_FILTER_CLEAR_FLAG(_pAd, _F) ((_pAd)->CommonCfg.PacketFilter &= ~(_F))
-#define RX_FILTER_TEST_FLAG(_pAd, _F) (((_pAd)->CommonCfg.PacketFilter & (_F)) != 0)
-
-#define STA_NO_SECURITY_ON(_p) (_p->StaCfg.WepStatus == Ndis802_11EncryptionDisabled)
-#define STA_WEP_ON(_p) (_p->StaCfg.WepStatus == Ndis802_11Encryption1Enabled)
-#define STA_TKIP_ON(_p) (_p->StaCfg.WepStatus == Ndis802_11Encryption2Enabled)
-#define STA_AES_ON(_p) (_p->StaCfg.WepStatus == Ndis802_11Encryption3Enabled)
-
-#define STA_TGN_WIFI_ON(_p) (_p->StaCfg.bTGnWifiTest == TRUE)
-
-#define CKIP_KP_ON(_p) ((((_p)->StaCfg.CkipFlag) & 0x10) && ((_p)->StaCfg.bCkipCmicOn == TRUE))
-#define CKIP_CMIC_ON(_p) ((((_p)->StaCfg.CkipFlag) & 0x08) && ((_p)->StaCfg.bCkipCmicOn == TRUE))
-
-
-#define INC_RING_INDEX(_idx, _RingSize) \
-{ \
- (_idx) = (_idx+1) % (_RingSize); \
-}
-
-#ifdef RT30xx
-// We will have a cost down version which mac version is 0x3090xxxx
-#define IS_RT3090(_pAd) ((((_pAd)->MACVersion & 0xffff0000) == 0x30710000) || (((_pAd)->MACVersion & 0xffff0000) == 0x30900000))
-#endif
-#define IS_RT3070(_pAd) (((_pAd)->MACVersion & 0xffff0000) == 0x30700000)
-#ifdef RT30xx
-#define IS_RT3071(_pAd) (((_pAd)->MACVersion & 0xffff0000) == 0x30710000)
-#define IS_RT2070(_pAd) (((_pAd)->RfIcType == RFIC_2020) || ((_pAd)->EFuseTag == 0x27))
-
-#define IS_RT30xx(_pAd) (((_pAd)->MACVersion & 0xfff00000) == 0x30700000)
-#endif
-
-#define RING_PACKET_INIT(_TxRing, _idx) \
-{ \
- _TxRing->Cell[_idx].pNdisPacket = NULL; \
- _TxRing->Cell[_idx].pNextNdisPacket = NULL; \
-}
-
-#define TXDT_INIT(_TxD) \
-{ \
- NdisZeroMemory(_TxD, TXD_SIZE); \
- _TxD->DMADONE = 1; \
-}
-
-//Set last data segment
-#define RING_SET_LASTDS(_TxD, _IsSD0) \
-{ \
- if (_IsSD0) {_TxD->LastSec0 = 1;} \
- else {_TxD->LastSec1 = 1;} \
-}
-
-// Increase TxTsc value for next transmission
-// TODO:
-// When i==6, means TSC has done one full cycle, do re-keying stuff follow specs
-// Should send a special event microsoft defined to request re-key
-#define INC_TX_TSC(_tsc) \
-{ \
- int i=0; \
- while (++_tsc[i] == 0x0) \
- { \
- i++; \
- if (i == 6) \
- break; \
- } \
-}
-
-// StaActive.SupportedHtPhy.MCSSet is copied from AP beacon. Don't need to update here.
-#define COPY_HTSETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(_pAd) \
-{ \
- _pAd->StaActive.SupportedHtPhy.ChannelWidth = _pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth; \
- _pAd->StaActive.SupportedHtPhy.MimoPs = _pAd->MlmeAux.HtCapability.HtCapInfo.MimoPs; \
- _pAd->StaActive.SupportedHtPhy.GF = _pAd->MlmeAux.HtCapability.HtCapInfo.GF; \
- _pAd->StaActive.SupportedHtPhy.ShortGIfor20 = _pAd->MlmeAux.HtCapability.HtCapInfo.ShortGIfor20; \
- _pAd->StaActive.SupportedHtPhy.ShortGIfor40 = _pAd->MlmeAux.HtCapability.HtCapInfo.ShortGIfor40; \
- _pAd->StaActive.SupportedHtPhy.TxSTBC = _pAd->MlmeAux.HtCapability.HtCapInfo.TxSTBC; \
- _pAd->StaActive.SupportedHtPhy.RxSTBC = _pAd->MlmeAux.HtCapability.HtCapInfo.RxSTBC; \
- _pAd->StaActive.SupportedHtPhy.ExtChanOffset = _pAd->MlmeAux.AddHtInfo.AddHtInfo.ExtChanOffset; \
- _pAd->StaActive.SupportedHtPhy.RecomWidth = _pAd->MlmeAux.AddHtInfo.AddHtInfo.RecomWidth; \
- _pAd->StaActive.SupportedHtPhy.OperaionMode = _pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode; \
- _pAd->StaActive.SupportedHtPhy.NonGfPresent = _pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent; \
- NdisMoveMemory((_pAd)->MacTab.Content[BSSID_WCID].HTCapability.MCSSet, (_pAd)->StaActive.SupportedPhyInfo.MCSSet, sizeof(UCHAR) * 16);\
-}
-
-#define COPY_AP_HTSETTINGS_FROM_BEACON(_pAd, _pHtCapability) \
-{ \
- _pAd->MacTab.Content[BSSID_WCID].AMsduSize = (UCHAR)(_pHtCapability->HtCapInfo.AMsduSize); \
- _pAd->MacTab.Content[BSSID_WCID].MmpsMode= (UCHAR)(_pHtCapability->HtCapInfo.MimoPs); \
- _pAd->MacTab.Content[BSSID_WCID].MaxRAmpduFactor = (UCHAR)(_pHtCapability->HtCapParm.MaxRAmpduFactor); \
-}
-
-//
-// BBP & RF are using indirect access. Before write any value into it.
-// We have to make sure there is no outstanding command pending via checking busy bit.
-//
-#define MAX_BUSY_COUNT 100 // Number of retry before failing access BBP & RF indirect register
-//
-
-#ifdef RT2870
-#define RTMP_RF_IO_WRITE32(_A, _V) RTUSBWriteRFRegister(_A, _V)
-#define RTMP_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV) RTUSBReadBBPRegister(_A, _I, _pV)
-#define RTMP_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V) RTUSBWriteBBPRegister(_A, _I, _V)
-
-#define BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V) RTUSBWriteBBPRegister(_A, _I, _V)
-#define BBP_IO_READ8_BY_REG_ID(_A, _I, _pV) RTUSBReadBBPRegister(_A, _I, _pV)
-#endif // RT2870 //
-
-#ifdef RT30xx
-#define RTMP_RF_IO_READ8_BY_REG_ID(_A, _I, _pV) RT30xxReadRFRegister(_A, _I, _pV)
-#define RTMP_RF_IO_WRITE8_BY_REG_ID(_A, _I, _V) RT30xxWriteRFRegister(_A, _I, _V)
-#endif // RT30xx //
-
-#define MAP_CHANNEL_ID_TO_KHZ(ch, khz) { \
- switch (ch) \
- { \
- case 1: khz = 2412000; break; \
- case 2: khz = 2417000; break; \
- case 3: khz = 2422000; break; \
- case 4: khz = 2427000; break; \
- case 5: khz = 2432000; break; \
- case 6: khz = 2437000; break; \
- case 7: khz = 2442000; break; \
- case 8: khz = 2447000; break; \
- case 9: khz = 2452000; break; \
- case 10: khz = 2457000; break; \
- case 11: khz = 2462000; break; \
- case 12: khz = 2467000; break; \
- case 13: khz = 2472000; break; \
- case 14: khz = 2484000; break; \
- case 36: /* UNII */ khz = 5180000; break; \
- case 40: /* UNII */ khz = 5200000; break; \
- case 44: /* UNII */ khz = 5220000; break; \
- case 48: /* UNII */ khz = 5240000; break; \
- case 52: /* UNII */ khz = 5260000; break; \
- case 56: /* UNII */ khz = 5280000; break; \
- case 60: /* UNII */ khz = 5300000; break; \
- case 64: /* UNII */ khz = 5320000; break; \
- case 149: /* UNII */ khz = 5745000; break; \
- case 153: /* UNII */ khz = 5765000; break; \
- case 157: /* UNII */ khz = 5785000; break; \
- case 161: /* UNII */ khz = 5805000; break; \
- case 165: /* UNII */ khz = 5825000; break; \
- case 100: /* HiperLAN2 */ khz = 5500000; break; \
- case 104: /* HiperLAN2 */ khz = 5520000; break; \
- case 108: /* HiperLAN2 */ khz = 5540000; break; \
- case 112: /* HiperLAN2 */ khz = 5560000; break; \
- case 116: /* HiperLAN2 */ khz = 5580000; break; \
- case 120: /* HiperLAN2 */ khz = 5600000; break; \
- case 124: /* HiperLAN2 */ khz = 5620000; break; \
- case 128: /* HiperLAN2 */ khz = 5640000; break; \
- case 132: /* HiperLAN2 */ khz = 5660000; break; \
- case 136: /* HiperLAN2 */ khz = 5680000; break; \
- case 140: /* HiperLAN2 */ khz = 5700000; break; \
- case 34: /* Japan MMAC */ khz = 5170000; break; \
- case 38: /* Japan MMAC */ khz = 5190000; break; \
- case 42: /* Japan MMAC */ khz = 5210000; break; \
- case 46: /* Japan MMAC */ khz = 5230000; break; \
- case 184: /* Japan */ khz = 4920000; break; \
- case 188: /* Japan */ khz = 4940000; break; \
- case 192: /* Japan */ khz = 4960000; break; \
- case 196: /* Japan */ khz = 4980000; break; \
- case 208: /* Japan, means J08 */ khz = 5040000; break; \
- case 212: /* Japan, means J12 */ khz = 5060000; break; \
- case 216: /* Japan, means J16 */ khz = 5080000; break; \
- default: khz = 2412000; break; \
- } \
- }
-
-#define MAP_KHZ_TO_CHANNEL_ID(khz, ch) { \
- switch (khz) \
- { \
- case 2412000: ch = 1; break; \
- case 2417000: ch = 2; break; \
- case 2422000: ch = 3; break; \
- case 2427000: ch = 4; break; \
- case 2432000: ch = 5; break; \
- case 2437000: ch = 6; break; \
- case 2442000: ch = 7; break; \
- case 2447000: ch = 8; break; \
- case 2452000: ch = 9; break; \
- case 2457000: ch = 10; break; \
- case 2462000: ch = 11; break; \
- case 2467000: ch = 12; break; \
- case 2472000: ch = 13; break; \
- case 2484000: ch = 14; break; \
- case 5180000: ch = 36; /* UNII */ break; \
- case 5200000: ch = 40; /* UNII */ break; \
- case 5220000: ch = 44; /* UNII */ break; \
- case 5240000: ch = 48; /* UNII */ break; \
- case 5260000: ch = 52; /* UNII */ break; \
- case 5280000: ch = 56; /* UNII */ break; \
- case 5300000: ch = 60; /* UNII */ break; \
- case 5320000: ch = 64; /* UNII */ break; \
- case 5745000: ch = 149; /* UNII */ break; \
- case 5765000: ch = 153; /* UNII */ break; \
- case 5785000: ch = 157; /* UNII */ break; \
- case 5805000: ch = 161; /* UNII */ break; \
- case 5825000: ch = 165; /* UNII */ break; \
- case 5500000: ch = 100; /* HiperLAN2 */ break; \
- case 5520000: ch = 104; /* HiperLAN2 */ break; \
- case 5540000: ch = 108; /* HiperLAN2 */ break; \
- case 5560000: ch = 112; /* HiperLAN2 */ break; \
- case 5580000: ch = 116; /* HiperLAN2 */ break; \
- case 5600000: ch = 120; /* HiperLAN2 */ break; \
- case 5620000: ch = 124; /* HiperLAN2 */ break; \
- case 5640000: ch = 128; /* HiperLAN2 */ break; \
- case 5660000: ch = 132; /* HiperLAN2 */ break; \
- case 5680000: ch = 136; /* HiperLAN2 */ break; \
- case 5700000: ch = 140; /* HiperLAN2 */ break; \
- case 5170000: ch = 34; /* Japan MMAC */ break; \
- case 5190000: ch = 38; /* Japan MMAC */ break; \
- case 5210000: ch = 42; /* Japan MMAC */ break; \
- case 5230000: ch = 46; /* Japan MMAC */ break; \
- case 4920000: ch = 184; /* Japan */ break; \
- case 4940000: ch = 188; /* Japan */ break; \
- case 4960000: ch = 192; /* Japan */ break; \
- case 4980000: ch = 196; /* Japan */ break; \
- case 5040000: ch = 208; /* Japan, means J08 */ break; \
- case 5060000: ch = 212; /* Japan, means J12 */ break; \
- case 5080000: ch = 216; /* Japan, means J16 */ break; \
- default: ch = 1; break; \
- } \
- }
-
-//
-// Common fragment list structure - Identical to the scatter gather frag list structure
-//
-#define NIC_MAX_PHYS_BUF_COUNT 8
-
-typedef struct _RTMP_SCATTER_GATHER_ELEMENT {
- PVOID Address;
- ULONG Length;
- PULONG Reserved;
-} RTMP_SCATTER_GATHER_ELEMENT, *PRTMP_SCATTER_GATHER_ELEMENT;
-
-
-typedef struct _RTMP_SCATTER_GATHER_LIST {
- ULONG NumberOfElements;
- PULONG Reserved;
- RTMP_SCATTER_GATHER_ELEMENT Elements[NIC_MAX_PHYS_BUF_COUNT];
-} RTMP_SCATTER_GATHER_LIST, *PRTMP_SCATTER_GATHER_LIST;
-
-//
-// Some utility macros
-//
-#ifndef min
-#define min(_a, _b) (((_a) < (_b)) ? (_a) : (_b))
-#endif
-
-#ifndef max
-#define max(_a, _b) (((_a) > (_b)) ? (_a) : (_b))
-#endif
-
-#define GET_LNA_GAIN(_pAd) ((_pAd->LatchRfRegs.Channel <= 14) ? (_pAd->BLNAGain) : ((_pAd->LatchRfRegs.Channel <= 64) ? (_pAd->ALNAGain0) : ((_pAd->LatchRfRegs.Channel <= 128) ? (_pAd->ALNAGain1) : (_pAd->ALNAGain2))))
-
-#define INC_COUNTER64(Val) (Val.QuadPart++)
-
-#define INFRA_ON(_p) (OPSTATUS_TEST_FLAG(_p, fOP_STATUS_INFRA_ON))
-#define ADHOC_ON(_p) (OPSTATUS_TEST_FLAG(_p, fOP_STATUS_ADHOC_ON))
-#define MONITOR_ON(_p) (((_p)->StaCfg.BssType) == BSS_MONITOR)
-#define IDLE_ON(_p) (!INFRA_ON(_p) && !ADHOC_ON(_p))
-
-// Check LEAP & CCKM flags
-#define LEAP_ON(_p) (((_p)->StaCfg.LeapAuthMode) == CISCO_AuthModeLEAP)
-#define LEAP_CCKM_ON(_p) ((((_p)->StaCfg.LeapAuthMode) == CISCO_AuthModeLEAP) && ((_p)->StaCfg.LeapAuthInfo.CCKM == TRUE))
-
-// if orginal Ethernet frame contains no LLC/SNAP, then an extra LLC/SNAP encap is required
-#define EXTRA_LLCSNAP_ENCAP_FROM_PKT_START(_pBufVA, _pExtraLlcSnapEncap) \
-{ \
- if (((*(_pBufVA + 12) << 8) + *(_pBufVA + 13)) > 1500) \
- { \
- _pExtraLlcSnapEncap = SNAP_802_1H; \
- if (NdisEqualMemory(IPX, _pBufVA + 12, 2) || \
- NdisEqualMemory(APPLE_TALK, _pBufVA + 12, 2)) \
- { \
- _pExtraLlcSnapEncap = SNAP_BRIDGE_TUNNEL; \
- } \
- } \
- else \
- { \
- _pExtraLlcSnapEncap = NULL; \
- } \
-}
-
-// New Define for new Tx Path.
-#define EXTRA_LLCSNAP_ENCAP_FROM_PKT_OFFSET(_pBufVA, _pExtraLlcSnapEncap) \
-{ \
- if (((*(_pBufVA) << 8) + *(_pBufVA + 1)) > 1500) \
- { \
- _pExtraLlcSnapEncap = SNAP_802_1H; \
- if (NdisEqualMemory(IPX, _pBufVA, 2) || \
- NdisEqualMemory(APPLE_TALK, _pBufVA, 2)) \
- { \
- _pExtraLlcSnapEncap = SNAP_BRIDGE_TUNNEL; \
- } \
- } \
- else \
- { \
- _pExtraLlcSnapEncap = NULL; \
- } \
-}
-
-
-#define MAKE_802_3_HEADER(_p, _pMac1, _pMac2, _pType) \
-{ \
- NdisMoveMemory(_p, _pMac1, MAC_ADDR_LEN); \
- NdisMoveMemory((_p + MAC_ADDR_LEN), _pMac2, MAC_ADDR_LEN); \
- NdisMoveMemory((_p + MAC_ADDR_LEN * 2), _pType, LENGTH_802_3_TYPE); \
-}
-
-// if pData has no LLC/SNAP (neither RFC1042 nor Bridge tunnel), keep it that way.
-// else if the received frame is LLC/SNAP-encaped IPX or APPLETALK, preserve the LLC/SNAP field
-// else remove the LLC/SNAP field from the result Ethernet frame
-// Patch for WHQL only, which did not turn on Netbios but use IPX within its payload
-// Note:
-// _pData & _DataSize may be altered (remove 8-byte LLC/SNAP) by this MACRO
-// _pRemovedLLCSNAP: pointer to removed LLC/SNAP; NULL is not removed
-#define CONVERT_TO_802_3(_p8023hdr, _pDA, _pSA, _pData, _DataSize, _pRemovedLLCSNAP) \
-{ \
- char LLC_Len[2]; \
- \
- _pRemovedLLCSNAP = NULL; \
- if (NdisEqualMemory(SNAP_802_1H, _pData, 6) || \
- NdisEqualMemory(SNAP_BRIDGE_TUNNEL, _pData, 6)) \
- { \
- PUCHAR pProto = _pData + 6; \
- \
- if ((NdisEqualMemory(IPX, pProto, 2) || NdisEqualMemory(APPLE_TALK, pProto, 2)) && \
- NdisEqualMemory(SNAP_802_1H, _pData, 6)) \
- { \
- LLC_Len[0] = (UCHAR)(_DataSize / 256); \
- LLC_Len[1] = (UCHAR)(_DataSize % 256); \
- MAKE_802_3_HEADER(_p8023hdr, _pDA, _pSA, LLC_Len); \
- } \
- else \
- { \
- MAKE_802_3_HEADER(_p8023hdr, _pDA, _pSA, pProto); \
- _pRemovedLLCSNAP = _pData; \
- _DataSize -= LENGTH_802_1_H; \
- _pData += LENGTH_802_1_H; \
- } \
- } \
- else \
- { \
- LLC_Len[0] = (UCHAR)(_DataSize / 256); \
- LLC_Len[1] = (UCHAR)(_DataSize % 256); \
- MAKE_802_3_HEADER(_p8023hdr, _pDA, _pSA, LLC_Len); \
- } \
-}
-
-#define SWITCH_AB( _pAA, _pBB) \
-{ \
- PVOID pCC; \
- pCC = _pBB; \
- _pBB = _pAA; \
- _pAA = pCC; \
-}
-
-// Enqueue this frame to MLME engine
-// We need to enqueue the whole frame because MLME need to pass data type
-// information from 802.11 header
-#ifdef RT2870
-#define REPORT_MGMT_FRAME_TO_MLME(_pAd, Wcid, _pFrame, _FrameSize, _Rssi0, _Rssi1, _Rssi2, _PlcpSignal) \
-{ \
- UINT32 High32TSF=0, Low32TSF=0; \
- MlmeEnqueueForRecv(_pAd, Wcid, High32TSF, Low32TSF, (UCHAR)_Rssi0, (UCHAR)_Rssi1,(UCHAR)_Rssi2,_FrameSize, _pFrame, (UCHAR)_PlcpSignal); \
-}
-#endif // RT2870 //
-
-#ifdef RT30xx
-//Need to collect each ant's rssi concurrently
-//rssi1 is report to pair2 Ant and rss2 is reprot to pair1 Ant when 4 Ant
-#define COLLECT_RX_ANTENNA_AVERAGE_RSSI(_pAd, _rssi1, _rssi2) \
-{ \
- SHORT AvgRssi; \
- UCHAR UsedAnt; \
- if (_pAd->RxAnt.EvaluatePeriod == 0) \
- { \
- UsedAnt = _pAd->RxAnt.Pair1PrimaryRxAnt; \
- AvgRssi = _pAd->RxAnt.Pair1AvgRssi[UsedAnt]; \
- if (AvgRssi < 0) \
- AvgRssi = AvgRssi - (AvgRssi >> 3) + _rssi1; \
- else \
- AvgRssi = _rssi1 << 3; \
- _pAd->RxAnt.Pair1AvgRssi[UsedAnt] = AvgRssi; \
- } \
- else \
- { \
- UsedAnt = _pAd->RxAnt.Pair1SecondaryRxAnt; \
- AvgRssi = _pAd->RxAnt.Pair1AvgRssi[UsedAnt]; \
- if ((AvgRssi < 0) && (_pAd->RxAnt.FirstPktArrivedWhenEvaluate)) \
- AvgRssi = AvgRssi - (AvgRssi >> 3) + _rssi1; \
- else \
- { \
- _pAd->RxAnt.FirstPktArrivedWhenEvaluate = TRUE; \
- AvgRssi = _rssi1 << 3; \
- } \
- _pAd->RxAnt.Pair1AvgRssi[UsedAnt] = AvgRssi; \
- _pAd->RxAnt.RcvPktNumWhenEvaluate++; \
- } \
-}
-#endif // RT30xx //
-
-
-#define NDIS_QUERY_BUFFER(_NdisBuf, _ppVA, _pBufLen) \
- NdisQueryBuffer(_NdisBuf, _ppVA, _pBufLen)
-
-#define MAC_ADDR_EQUAL(pAddr1,pAddr2) RTMPEqualMemory((PVOID)(pAddr1), (PVOID)(pAddr2), MAC_ADDR_LEN)
-#define SSID_EQUAL(ssid1, len1, ssid2, len2) ((len1==len2) && (RTMPEqualMemory(ssid1, ssid2, len1)))
-
-//
-// Check if it is Japan W53(ch52,56,60,64) channel.
-//
-#define JapanChannelCheck(channel) ((channel == 52) || (channel == 56) || (channel == 60) || (channel == 64))
-
-#define STA_PORT_SECURED(_pAd) \
-{ \
- _pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; \
- NdisAcquireSpinLock(&_pAd->MacTabLock); \
- _pAd->MacTab.Content[BSSID_WCID].PortSecured = _pAd->StaCfg.PortSecured; \
- NdisReleaseSpinLock(&_pAd->MacTabLock); \
-}
-
-//
-// Register set pair for initialzation register set definition
-//
-typedef struct _RTMP_REG_PAIR
-{
- ULONG Register;
- ULONG Value;
-} RTMP_REG_PAIR, *PRTMP_REG_PAIR;
-
-typedef struct _REG_PAIR
-{
- UCHAR Register;
- UCHAR Value;
-} REG_PAIR, *PREG_PAIR;
-
-//
-// Register set pair for initialzation register set definition
-//
-typedef struct _RTMP_RF_REGS
-{
- UCHAR Channel;
- ULONG R1;
- ULONG R2;
- ULONG R3;
- ULONG R4;
-} RTMP_RF_REGS, *PRTMP_RF_REGS;
-
-typedef struct _FREQUENCY_ITEM {
- UCHAR Channel;
- UCHAR N;
- UCHAR R;
- UCHAR K;
-} FREQUENCY_ITEM, *PFREQUENCY_ITEM;
-
-//
-// Data buffer for DMA operation, the buffer must be contiguous physical memory
-// Both DMA to / from CPU use the same structure.
-//
-typedef struct _RTMP_DMABUF
-{
- ULONG AllocSize;
- PVOID AllocVa; // TxBuf virtual address
- NDIS_PHYSICAL_ADDRESS AllocPa; // TxBuf physical address
-} RTMP_DMABUF, *PRTMP_DMABUF;
-
-
-typedef union _HEADER_802_11_SEQ{
- struct {
- USHORT Frag:4;
- USHORT Sequence:12;
- } field;
- USHORT value;
-} HEADER_802_11_SEQ, *PHEADER_802_11_SEQ;
-
-//
-// Data buffer for DMA operation, the buffer must be contiguous physical memory
-// Both DMA to / from CPU use the same structure.
-//
-typedef struct _RTMP_REORDERBUF
-{
- BOOLEAN IsFull;
- PVOID AllocVa; // TxBuf virtual address
- UCHAR Header802_3[14];
- HEADER_802_11_SEQ Sequence; //support compressed bitmap BA, so no consider fragment in BA
- UCHAR DataOffset;
- USHORT Datasize;
- ULONG AllocSize;
-#ifdef RT2870
- PUCHAR AllocPa;
-#endif // RT2870 //
-} RTMP_REORDERBUF, *PRTMP_REORDERBUF;
-
-//
-// Control block (Descriptor) for all ring descriptor DMA operation, buffer must be
-// contiguous physical memory. NDIS_PACKET stored the binding Rx packet descriptor
-// which won't be released, driver has to wait until upper layer return the packet
-// before giveing up this rx ring descriptor to ASIC. NDIS_BUFFER is assocaited pair
-// to describe the packet buffer. For Tx, NDIS_PACKET stored the tx packet descriptor
-// which driver should ACK upper layer when the tx is physically done or failed.
-//
-typedef struct _RTMP_DMACB
-{
- ULONG AllocSize; // Control block size
- PVOID AllocVa; // Control block virtual address
- NDIS_PHYSICAL_ADDRESS AllocPa; // Control block physical address
- PNDIS_PACKET pNdisPacket;
- PNDIS_PACKET pNextNdisPacket;
-
- RTMP_DMABUF DmaBuf; // Associated DMA buffer structure
-} RTMP_DMACB, *PRTMP_DMACB;
-
-typedef struct _RTMP_TX_BUF
-{
- PQUEUE_ENTRY Next;
- UCHAR Index;
- ULONG AllocSize; // Control block size
- PVOID AllocVa; // Control block virtual address
- NDIS_PHYSICAL_ADDRESS AllocPa; // Control block physical address
-} RTMP_TXBUF, *PRTMP_TXBUF;
-
-typedef struct _RTMP_RX_BUF
-{
- BOOLEAN InUse;
- ULONG ByBaRecIndex;
- RTMP_REORDERBUF MAP_RXBuf[MAX_RX_REORDERBUF];
-} RTMP_RXBUF, *PRTMP_RXBUF;
-typedef struct _RTMP_TX_RING
-{
- RTMP_DMACB Cell[TX_RING_SIZE];
- UINT32 TxCpuIdx;
- UINT32 TxDmaIdx;
- UINT32 TxSwFreeIdx; // software next free tx index
-} RTMP_TX_RING, *PRTMP_TX_RING;
-
-typedef struct _RTMP_RX_RING
-{
- RTMP_DMACB Cell[RX_RING_SIZE];
- UINT32 RxCpuIdx;
- UINT32 RxDmaIdx;
- INT32 RxSwReadIdx; // software next read index
-} RTMP_RX_RING, *PRTMP_RX_RING;
-
-typedef struct _RTMP_MGMT_RING
-{
- RTMP_DMACB Cell[MGMT_RING_SIZE];
- UINT32 TxCpuIdx;
- UINT32 TxDmaIdx;
- UINT32 TxSwFreeIdx; // software next free tx index
-} RTMP_MGMT_RING, *PRTMP_MGMT_RING;
-
-//
-// Statistic counter structure
-//
-typedef struct _COUNTER_802_3
-{
- // General Stats
- ULONG GoodTransmits;
- ULONG GoodReceives;
- ULONG TxErrors;
- ULONG RxErrors;
- ULONG RxNoBuffer;
-
- // Ethernet Stats
- ULONG RcvAlignmentErrors;
- ULONG OneCollision;
- ULONG MoreCollisions;
-
-} COUNTER_802_3, *PCOUNTER_802_3;
-
-typedef struct _COUNTER_802_11 {
- ULONG Length;
- LARGE_INTEGER LastTransmittedFragmentCount;
- LARGE_INTEGER TransmittedFragmentCount;
- LARGE_INTEGER MulticastTransmittedFrameCount;
- LARGE_INTEGER FailedCount;
- LARGE_INTEGER RetryCount;
- LARGE_INTEGER MultipleRetryCount;
- LARGE_INTEGER RTSSuccessCount;
- LARGE_INTEGER RTSFailureCount;
- LARGE_INTEGER ACKFailureCount;
- LARGE_INTEGER FrameDuplicateCount;
- LARGE_INTEGER ReceivedFragmentCount;
- LARGE_INTEGER MulticastReceivedFrameCount;
- LARGE_INTEGER FCSErrorCount;
-} COUNTER_802_11, *PCOUNTER_802_11;
-
-typedef struct _COUNTER_RALINK {
- ULONG TransmittedByteCount; // both successful and failure, used to calculate TX throughput
- ULONG ReceivedByteCount; // both CRC okay and CRC error, used to calculate RX throughput
- ULONG BeenDisassociatedCount;
- ULONG BadCQIAutoRecoveryCount;
- ULONG PoorCQIRoamingCount;
- ULONG MgmtRingFullCount;
- ULONG RxCountSinceLastNULL;
- ULONG RxCount;
- ULONG RxRingErrCount;
- ULONG KickTxCount;
- ULONG TxRingErrCount;
- LARGE_INTEGER RealFcsErrCount;
- ULONG PendingNdisPacketCount;
-
- ULONG OneSecOsTxCount[NUM_OF_TX_RING];
- ULONG OneSecDmaDoneCount[NUM_OF_TX_RING];
- UINT32 OneSecTxDoneCount;
- ULONG OneSecRxCount;
- UINT32 OneSecTxAggregationCount;
- UINT32 OneSecRxAggregationCount;
-
- UINT32 OneSecFrameDuplicateCount;
-
-#ifdef RT2870
- ULONG OneSecTransmittedByteCount; // both successful and failure, used to calculate TX throughput
-#endif // RT2870 //
-
- UINT32 OneSecTxNoRetryOkCount;
- UINT32 OneSecTxRetryOkCount;
- UINT32 OneSecTxFailCount;
- UINT32 OneSecFalseCCACnt; // CCA error count, for debug purpose, might move to global counter
- UINT32 OneSecRxOkCnt; // RX without error
- UINT32 OneSecRxOkDataCnt; // unicast-to-me DATA frame count
- UINT32 OneSecRxFcsErrCnt; // CRC error
- UINT32 OneSecBeaconSentCnt;
- UINT32 LastOneSecTotalTxCount; // OneSecTxNoRetryOkCount + OneSecTxRetryOkCount + OneSecTxFailCount
- UINT32 LastOneSecRxOkDataCnt; // OneSecRxOkDataCnt
- ULONG DuplicateRcv;
- ULONG TxAggCount;
- ULONG TxNonAggCount;
- ULONG TxAgg1MPDUCount;
- ULONG TxAgg2MPDUCount;
- ULONG TxAgg3MPDUCount;
- ULONG TxAgg4MPDUCount;
- ULONG TxAgg5MPDUCount;
- ULONG TxAgg6MPDUCount;
- ULONG TxAgg7MPDUCount;
- ULONG TxAgg8MPDUCount;
- ULONG TxAgg9MPDUCount;
- ULONG TxAgg10MPDUCount;
- ULONG TxAgg11MPDUCount;
- ULONG TxAgg12MPDUCount;
- ULONG TxAgg13MPDUCount;
- ULONG TxAgg14MPDUCount;
- ULONG TxAgg15MPDUCount;
- ULONG TxAgg16MPDUCount;
-
- LARGE_INTEGER TransmittedOctetsInAMSDU;
- LARGE_INTEGER TransmittedAMSDUCount;
- LARGE_INTEGER ReceivedOctesInAMSDUCount;
- LARGE_INTEGER ReceivedAMSDUCount;
- LARGE_INTEGER TransmittedAMPDUCount;
- LARGE_INTEGER TransmittedMPDUsInAMPDUCount;
- LARGE_INTEGER TransmittedOctetsInAMPDUCount;
- LARGE_INTEGER MPDUInReceivedAMPDUCount;
-} COUNTER_RALINK, *PCOUNTER_RALINK;
-
-typedef struct _PID_COUNTER {
- ULONG TxAckRequiredCount; // CRC error
- ULONG TxAggreCount;
- ULONG TxSuccessCount; // OneSecTxNoRetryOkCount + OneSecTxRetryOkCount + OneSecTxFailCount
- ULONG LastSuccessRate;
-} PID_COUNTER, *PPID_COUNTER;
-
-typedef struct _COUNTER_DRS {
- // to record the each TX rate's quality. 0 is best, the bigger the worse.
- USHORT TxQuality[MAX_STEP_OF_TX_RATE_SWITCH];
- UCHAR PER[MAX_STEP_OF_TX_RATE_SWITCH];
- UCHAR TxRateUpPenalty; // extra # of second penalty due to last unstable condition
- ULONG CurrTxRateStableTime; // # of second in current TX rate
- BOOLEAN fNoisyEnvironment;
- BOOLEAN fLastSecAccordingRSSI;
- UCHAR LastSecTxRateChangeAction; // 0: no change, 1:rate UP, 2:rate down
- UCHAR LastTimeTxRateChangeAction; //Keep last time value of LastSecTxRateChangeAction
- ULONG LastTxOkCount;
-} COUNTER_DRS, *PCOUNTER_DRS;
-
-//
-// Arcfour Structure Added by PaulWu
-//
-typedef struct _ARCFOUR
-{
- UINT X;
- UINT Y;
- UCHAR STATE[256];
-} ARCFOURCONTEXT, *PARCFOURCONTEXT;
-
-// MIMO Tx parameter, ShortGI, MCS, STBC, etc. these are fields in TXWI too. just copy to TXWI.
-typedef struct _RECEIVE_SETTING {
- USHORT NumOfRX:2; // MIMO. WE HAVE 3R
- USHORT Mode:2; //channel bandwidth 20MHz or 40 MHz
- USHORT ShortGI:1;
- USHORT STBC:2; //SPACE
- USHORT rsv:3;
- USHORT OFDM:1;
- USHORT MIMO:1;
- } RECEIVE_SETTING, *PRECEIVE_SETTING;
-
-// Shared key data structure
-typedef struct _WEP_KEY {
- UCHAR KeyLen; // Key length for each key, 0: entry is invalid
- UCHAR Key[MAX_LEN_OF_KEY]; // right now we implement 4 keys, 128 bits max
-} WEP_KEY, *PWEP_KEY;
-
-typedef struct _CIPHER_KEY {
- UCHAR Key[16]; // right now we implement 4 keys, 128 bits max
- UCHAR RxMic[8]; // make alignment
- UCHAR TxMic[8];
- UCHAR TxTsc[6]; // 48bit TSC value
- UCHAR RxTsc[6]; // 48bit TSC value
- UCHAR CipherAlg; // 0-none, 1:WEP64, 2:WEP128, 3:TKIP, 4:AES, 5:CKIP64, 6:CKIP128
- UCHAR KeyLen;
- UCHAR BssId[6];
- // Key length for each key, 0: entry is invalid
- UCHAR Type; // Indicate Pairwise/Group when reporting MIC error
-} CIPHER_KEY, *PCIPHER_KEY;
-
-typedef struct _BBP_TUNING_STRUCT {
- BOOLEAN Enable;
- UCHAR FalseCcaCountUpperBound; // 100 per sec
- UCHAR FalseCcaCountLowerBound; // 10 per sec
- UCHAR R17LowerBound; // specified in E2PROM
- UCHAR R17UpperBound; // 0x68 according to David Tung
- UCHAR CurrentR17Value;
-} BBP_TUNING, *PBBP_TUNING;
-
-typedef struct _SOFT_RX_ANT_DIVERSITY_STRUCT {
- UCHAR EvaluatePeriod; // 0:not evalute status, 1: evaluate status, 2: switching status
-#ifdef RT30xx
- UCHAR EvaluateStableCnt;
-#endif
- UCHAR Pair1PrimaryRxAnt; // 0:Ant-E1, 1:Ant-E2
- UCHAR Pair1SecondaryRxAnt; // 0:Ant-E1, 1:Ant-E2
- UCHAR Pair2PrimaryRxAnt; // 0:Ant-E3, 1:Ant-E4
- UCHAR Pair2SecondaryRxAnt; // 0:Ant-E3, 1:Ant-E4
- SHORT Pair1AvgRssi[2]; // AvgRssi[0]:E1, AvgRssi[1]:E2
- SHORT Pair2AvgRssi[2]; // AvgRssi[0]:E3, AvgRssi[1]:E4
- SHORT Pair1LastAvgRssi; //
- SHORT Pair2LastAvgRssi; //
- ULONG RcvPktNumWhenEvaluate;
- BOOLEAN FirstPktArrivedWhenEvaluate;
- RALINK_TIMER_STRUCT RxAntDiversityTimer;
-} SOFT_RX_ANT_DIVERSITY, *PSOFT_RX_ANT_DIVERSITY;
-
-typedef struct _LEAP_AUTH_INFO {
- BOOLEAN Enabled; //Ture: Enable LEAP Authentication
- BOOLEAN CCKM; //Ture: Use Fast Reauthentication with CCKM
- UCHAR Reserve[2];
- UCHAR UserName[256]; //LEAP, User name
- ULONG UserNameLen;
- UCHAR Password[256]; //LEAP, User Password
- ULONG PasswordLen;
-} LEAP_AUTH_INFO, *PLEAP_AUTH_INFO;
-
-typedef struct {
- UCHAR Addr[MAC_ADDR_LEN];
- UCHAR ErrorCode[2]; //00 01-Invalid authentication type
- //00 02-Authentication timeout
- //00 03-Challenge from AP failed
- //00 04-Challenge to AP failed
- BOOLEAN Reported;
-} ROGUEAP_ENTRY, *PROGUEAP_ENTRY;
-
-typedef struct {
- UCHAR RogueApNr;
- ROGUEAP_ENTRY RogueApEntry[MAX_LEN_OF_BSS_TABLE];
-} ROGUEAP_TABLE, *PROGUEAP_TABLE;
-
-typedef struct {
- BOOLEAN Enable;
- UCHAR Delta;
- BOOLEAN PlusSign;
-} CCK_TX_POWER_CALIBRATE, *PCCK_TX_POWER_CALIBRATE;
-
-//
-// Receive Tuple Cache Format
-//
-typedef struct _TUPLE_CACHE {
- BOOLEAN Valid;
- UCHAR MacAddress[MAC_ADDR_LEN];
- USHORT Sequence;
- USHORT Frag;
-} TUPLE_CACHE, *PTUPLE_CACHE;
-
-//
-// Fragment Frame structure
-//
-typedef struct _FRAGMENT_FRAME {
- PNDIS_PACKET pFragPacket;
- ULONG RxSize;
- USHORT Sequence;
- USHORT LastFrag;
- ULONG Flags; // Some extra frame information. bit 0: LLC presented
-} FRAGMENT_FRAME, *PFRAGMENT_FRAME;
-
-
-//
-// Packet information for NdisQueryPacket
-//
-typedef struct _PACKET_INFO {
- UINT PhysicalBufferCount; // Physical breaks of buffer descripor chained
- UINT BufferCount ; // Number of Buffer descriptor chained
- UINT TotalPacketLength ; // Self explained
- PNDIS_BUFFER pFirstBuffer; // Pointer to first buffer descriptor
-} PACKET_INFO, *PPACKET_INFO;
-
-//
-// Tkip Key structure which RC4 key & MIC calculation
-//
-typedef struct _TKIP_KEY_INFO {
- UINT nBytesInM; // # bytes in M for MICKEY
- ULONG IV16;
- ULONG IV32;
- ULONG K0; // for MICKEY Low
- ULONG K1; // for MICKEY Hig
- ULONG L; // Current state for MICKEY
- ULONG R; // Current state for MICKEY
- ULONG M; // Message accumulator for MICKEY
- UCHAR RC4KEY[16];
- UCHAR MIC[8];
-} TKIP_KEY_INFO, *PTKIP_KEY_INFO;
-
-//
-// Private / Misc data, counters for driver internal use
-//
-typedef struct __PRIVATE_STRUC {
- UINT SystemResetCnt; // System reset counter
- UINT TxRingFullCnt; // Tx ring full occurrance number
- UINT PhyRxErrCnt; // PHY Rx error count, for debug purpose, might move to global counter
- // Variables for WEP encryption / decryption in rtmp_wep.c
- UINT FCSCRC32;
- ARCFOURCONTEXT WEPCONTEXT;
- // Tkip stuff
- TKIP_KEY_INFO Tx;
- TKIP_KEY_INFO Rx;
-} PRIVATE_STRUC, *PPRIVATE_STRUC;
-
-// structure to tune BBP R66 (BBP TUNING)
-typedef struct _BBP_R66_TUNING {
- BOOLEAN bEnable;
- USHORT FalseCcaLowerThreshold; // default 100
- USHORT FalseCcaUpperThreshold; // default 512
- UCHAR R66Delta;
- UCHAR R66CurrentValue;
- BOOLEAN R66LowerUpperSelect; //Before LinkUp, Used LowerBound or UpperBound as R66 value.
-} BBP_R66_TUNING, *PBBP_R66_TUNING;
-
-// structure to store channel TX power
-typedef struct _CHANNEL_TX_POWER {
- USHORT RemainingTimeForUse; //unit: sec
- UCHAR Channel;
- CHAR Power;
- CHAR Power2;
- UCHAR MaxTxPwr;
- UCHAR DfsReq;
-} CHANNEL_TX_POWER, *PCHANNEL_TX_POWER;
-
-// structure to store 802.11j channel TX power
-typedef struct _CHANNEL_11J_TX_POWER {
- UCHAR Channel;
- UCHAR BW; // BW_10 or BW_20
- CHAR Power;
- CHAR Power2;
- USHORT RemainingTimeForUse; //unit: sec
-} CHANNEL_11J_TX_POWER, *PCHANNEL_11J_TX_POWER;
-
-typedef enum _ABGBAND_STATE_ {
- UNKNOWN_BAND,
- BG_BAND,
- A_BAND,
-} ABGBAND_STATE;
-
-typedef struct _MLME_STRUCT {
- // STA state machines
- STATE_MACHINE CntlMachine;
- STATE_MACHINE AssocMachine;
- STATE_MACHINE AuthMachine;
- STATE_MACHINE AuthRspMachine;
- STATE_MACHINE SyncMachine;
- STATE_MACHINE WpaPskMachine;
- STATE_MACHINE LeapMachine;
- STATE_MACHINE AironetMachine;
- STATE_MACHINE_FUNC AssocFunc[ASSOC_FUNC_SIZE];
- STATE_MACHINE_FUNC AuthFunc[AUTH_FUNC_SIZE];
- STATE_MACHINE_FUNC AuthRspFunc[AUTH_RSP_FUNC_SIZE];
- STATE_MACHINE_FUNC SyncFunc[SYNC_FUNC_SIZE];
- STATE_MACHINE_FUNC WpaPskFunc[WPA_PSK_FUNC_SIZE];
- STATE_MACHINE_FUNC AironetFunc[AIRONET_FUNC_SIZE];
- STATE_MACHINE_FUNC ActFunc[ACT_FUNC_SIZE];
- // Action
- STATE_MACHINE ActMachine;
-
- ULONG ChannelQuality; // 0..100, Channel Quality Indication for Roaming
- ULONG Now32; // latch the value of NdisGetSystemUpTime()
- ULONG LastSendNULLpsmTime;
-
- BOOLEAN bRunning;
- NDIS_SPIN_LOCK TaskLock;
- MLME_QUEUE Queue;
-
- UINT ShiftReg;
-
- RALINK_TIMER_STRUCT PeriodicTimer;
- RALINK_TIMER_STRUCT APSDPeriodicTimer;
- RALINK_TIMER_STRUCT LinkDownTimer;
- RALINK_TIMER_STRUCT LinkUpTimer;
- ULONG PeriodicRound;
- ULONG OneSecPeriodicRound;
-
- UCHAR RealRxPath;
- BOOLEAN bLowThroughput;
- BOOLEAN bEnableAutoAntennaCheck;
- RALINK_TIMER_STRUCT RxAntEvalTimer;
-
-#ifdef RT2870
- UCHAR CaliBW40RfR24;
- UCHAR CaliBW20RfR24;
-#endif // RT2870 //
-
-} MLME_STRUCT, *PMLME_STRUCT;
-
-// structure for radar detection and channel switch
-typedef struct _RADAR_DETECT_STRUCT {
- UCHAR CSCount; //Channel switch counter
- UCHAR CSPeriod; //Channel switch period (beacon count)
- UCHAR RDCount; //Radar detection counter
- UCHAR RDMode; //Radar Detection mode
- UCHAR RDDurRegion; //Radar detection duration region
- UCHAR BBPR16;
- UCHAR BBPR17;
- UCHAR BBPR18;
- UCHAR BBPR21;
- UCHAR BBPR22;
- UCHAR BBPR64;
- ULONG InServiceMonitorCount; // unit: sec
- UINT8 DfsSessionTime;
- BOOLEAN bFastDfs;
- UINT8 ChMovingTime;
- UINT8 LongPulseRadarTh;
-} RADAR_DETECT_STRUCT, *PRADAR_DETECT_STRUCT;
-
-typedef enum _REC_BLOCKACK_STATUS
-{
- Recipient_NONE=0,
- Recipient_USED,
- Recipient_HandleRes,
- Recipient_Accept
-} REC_BLOCKACK_STATUS, *PREC_BLOCKACK_STATUS;
-
-typedef enum _ORI_BLOCKACK_STATUS
-{
- Originator_NONE=0,
- Originator_USED,
- Originator_WaitRes,
- Originator_Done
-} ORI_BLOCKACK_STATUS, *PORI_BLOCKACK_STATUS;
-
-typedef struct _BA_ORI_ENTRY{
- UCHAR Wcid;
- UCHAR TID;
- UCHAR BAWinSize;
- UCHAR Token;
-// Sequence is to fill every outgoing QoS DATA frame's sequence field in 802.11 header.
- USHORT Sequence;
- USHORT TimeOutValue;
- ORI_BLOCKACK_STATUS ORI_BA_Status;
- RALINK_TIMER_STRUCT ORIBATimer;
- PVOID pAdapter;
-} BA_ORI_ENTRY, *PBA_ORI_ENTRY;
-
-typedef struct _BA_REC_ENTRY {
- UCHAR Wcid;
- UCHAR TID;
- UCHAR BAWinSize; // 7.3.1.14. each buffer is capable of holding a max AMSDU or MSDU.
- USHORT LastIndSeq;
- USHORT TimeOutValue;
- RALINK_TIMER_STRUCT RECBATimer;
- ULONG LastIndSeqAtTimer;
- ULONG nDropPacket;
- ULONG rcvSeq;
- REC_BLOCKACK_STATUS REC_BA_Status;
- NDIS_SPIN_LOCK RxReRingLock; // Rx Ring spinlock
- PVOID pAdapter;
- struct reordering_list list;
-} BA_REC_ENTRY, *PBA_REC_ENTRY;
-
-
-typedef struct {
- ULONG numAsRecipient; // I am recipient of numAsRecipient clients. These client are in the BARecEntry[]
- ULONG numAsOriginator; // I am originator of numAsOriginator clients. These clients are in the BAOriEntry[]
- BA_ORI_ENTRY BAOriEntry[MAX_LEN_OF_BA_ORI_TABLE];
- BA_REC_ENTRY BARecEntry[MAX_LEN_OF_BA_REC_TABLE];
-} BA_TABLE, *PBA_TABLE;
-
-//For QureyBATableOID use;
-typedef struct PACKED _OID_BA_REC_ENTRY{
- UCHAR MACAddr[MAC_ADDR_LEN];
- UCHAR BaBitmap; // if (BaBitmap&(1<<TID)), this session with{MACAddr, TID}exists, so read BufSize[TID] for BufferSize
- UCHAR rsv;
- UCHAR BufSize[8];
- REC_BLOCKACK_STATUS REC_BA_Status[8];
-} OID_BA_REC_ENTRY, *POID_BA_REC_ENTRY;
-
-//For QureyBATableOID use;
-typedef struct PACKED _OID_BA_ORI_ENTRY{
- UCHAR MACAddr[MAC_ADDR_LEN];
- UCHAR BaBitmap; // if (BaBitmap&(1<<TID)), this session with{MACAddr, TID}exists, so read BufSize[TID] for BufferSize, read ORI_BA_Status[TID] for status
- UCHAR rsv;
- UCHAR BufSize[8];
- ORI_BLOCKACK_STATUS ORI_BA_Status[8];
-} OID_BA_ORI_ENTRY, *POID_BA_ORI_ENTRY;
-
-typedef struct _QUERYBA_TABLE{
- OID_BA_ORI_ENTRY BAOriEntry[32];
- OID_BA_REC_ENTRY BARecEntry[32];
- UCHAR OriNum;// Number of below BAOriEntry
- UCHAR RecNum;// Number of below BARecEntry
-} QUERYBA_TABLE, *PQUERYBA_TABLE;
-
-typedef union _BACAP_STRUC {
- struct {
- UINT32 RxBAWinLimit:8;
- UINT32 TxBAWinLimit:8;
- UINT32 AutoBA:1; // automatically BA
- UINT32 Policy:2; // 0: DELAY_BA 1:IMMED_BA (//BA Policy subfiled value in ADDBA frame) 2:BA-not use
- UINT32 MpduDensity:3;
- UINT32 AmsduEnable:1; //Enable AMSDU transmisstion
- UINT32 AmsduSize:1; // 0:3839, 1:7935 bytes. UINT MSDUSizeToBytes[] = { 3839, 7935};
- UINT32 MMPSmode:2; // MIMO power save more, 0:static, 1:dynamic, 2:rsv, 3:mimo enable
- UINT32 bHtAdhoc:1; // adhoc can use ht rate.
- UINT32 b2040CoexistScanSup:1; //As Sta, support do 2040 coexistence scan for AP. As Ap, support monitor trigger event to check if can use BW 40MHz.
- UINT32 :4;
- } field;
- UINT32 word;
-} BACAP_STRUC, *PBACAP_STRUC;
-
-//This structure is for all 802.11n card InterOptibilityTest action. Reset all Num every n second. (Details see MLMEPeriodic)
-typedef struct _IOT_STRUC {
- UCHAR Threshold[2];
- UCHAR ReorderTimeOutNum[MAX_LEN_OF_BA_REC_TABLE]; // compare with threshold[0]
- UCHAR RefreshNum[MAX_LEN_OF_BA_REC_TABLE]; // compare with threshold[1]
- ULONG OneSecInWindowCount;
- ULONG OneSecFrameDuplicateCount;
- ULONG OneSecOutWindowCount;
- UCHAR DelOriAct;
- UCHAR DelRecAct;
- UCHAR RTSShortProt;
- UCHAR RTSLongProt;
- BOOLEAN bRTSLongProtOn;
- BOOLEAN bLastAtheros;
- BOOLEAN bCurrentAtheros;
- BOOLEAN bNowAtherosBurstOn;
- BOOLEAN bNextDisableRxBA;
- BOOLEAN bToggle;
-} IOT_STRUC, *PIOT_STRUC;
-
-// This is the registry setting for 802.11n transmit setting. Used in advanced page.
-typedef union _REG_TRANSMIT_SETTING {
- struct {
- UINT32 rsv0:10;
- UINT32 TxBF:1;
- UINT32 BW:1; //channel bandwidth 20MHz or 40 MHz
- UINT32 ShortGI:1;
- UINT32 STBC:1; //SPACE
- UINT32 TRANSNO:2;
- UINT32 HTMODE:1;
- UINT32 EXTCHA:2;
- UINT32 rsv:13;
- } field;
- UINT32 word;
-} REG_TRANSMIT_SETTING, *PREG_TRANSMIT_SETTING;
-
-typedef union _DESIRED_TRANSMIT_SETTING {
- struct {
- USHORT MCS:7; // MCS
- USHORT PhyMode:4;
- USHORT FixedTxMode:2; // If MCS isn't AUTO, fix rate in CCK, OFDM or HT mode.
- USHORT rsv:3;
- } field;
- USHORT word;
- } DESIRED_TRANSMIT_SETTING, *PDESIRED_TRANSMIT_SETTING;
-
-typedef struct {
- BOOLEAN IsRecipient;
- UCHAR MACAddr[MAC_ADDR_LEN];
- UCHAR TID;
- UCHAR nMSDU;
- USHORT TimeOut;
- BOOLEAN bAllTid; // If True, delete all TID for BA sessions with this MACaddr.
-} OID_ADD_BA_ENTRY, *POID_ADD_BA_ENTRY;
-
-//
-// Multiple SSID structure
-//
-#define WLAN_MAX_NUM_OF_TIM ((MAX_LEN_OF_MAC_TABLE >> 3) + 1) /* /8 + 1 */
-#define WLAN_CT_TIM_BCMC_OFFSET 0 /* unit: 32B */
-
-/* clear bcmc TIM bit */
-#define WLAN_MR_TIM_BCMC_CLEAR(apidx) \
- pAd->ApCfg.MBSSID[apidx].TimBitmaps[WLAN_CT_TIM_BCMC_OFFSET] &= ~BIT8[0];
-
-/* set bcmc TIM bit */
-#define WLAN_MR_TIM_BCMC_SET(apidx) \
- pAd->ApCfg.MBSSID[apidx].TimBitmaps[WLAN_CT_TIM_BCMC_OFFSET] |= BIT8[0];
-
-/* clear a station PS TIM bit */
-#define WLAN_MR_TIM_BIT_CLEAR(ad_p, apidx, wcid) \
- { UCHAR tim_offset = wcid >> 3; \
- UCHAR bit_offset = wcid & 0x7; \
- ad_p->ApCfg.MBSSID[apidx].TimBitmaps[tim_offset] &= (~BIT8[bit_offset]); }
-
-/* set a station PS TIM bit */
-#define WLAN_MR_TIM_BIT_SET(ad_p, apidx, wcid) \
- { UCHAR tim_offset = wcid >> 3; \
- UCHAR bit_offset = wcid & 0x7; \
- ad_p->ApCfg.MBSSID[apidx].TimBitmaps[tim_offset] |= BIT8[bit_offset]; }
-
-#ifdef RT2870
-#define BEACON_BITMAP_MASK 0xff
-typedef struct _BEACON_SYNC_STRUCT_
-{
- UCHAR BeaconBuf[HW_BEACON_MAX_COUNT][HW_BEACON_OFFSET];
- UCHAR BeaconTxWI[HW_BEACON_MAX_COUNT][TXWI_SIZE];
- ULONG TimIELocationInBeacon[HW_BEACON_MAX_COUNT];
- ULONG CapabilityInfoLocationInBeacon[HW_BEACON_MAX_COUNT];
- BOOLEAN EnableBeacon; // trigger to enable beacon transmission.
- UCHAR BeaconBitMap; // NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change.
- UCHAR DtimBitOn; // NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change.
-}BEACON_SYNC_STRUCT;
-#endif // RT2870 //
-
-typedef struct _MULTISSID_STRUCT {
- UCHAR Bssid[MAC_ADDR_LEN];
- UCHAR SsidLen;
- CHAR Ssid[MAX_LEN_OF_SSID];
- USHORT CapabilityInfo;
-
- PNET_DEV MSSIDDev;
-
- NDIS_802_11_AUTHENTICATION_MODE AuthMode;
- NDIS_802_11_WEP_STATUS WepStatus;
- NDIS_802_11_WEP_STATUS GroupKeyWepStatus;
- WPA_MIX_PAIR_CIPHER WpaMixPairCipher;
-
- ULONG TxCount;
- ULONG RxCount;
- ULONG ReceivedByteCount;
- ULONG TransmittedByteCount;
- ULONG RxErrorCount;
- ULONG RxDropCount;
-
- HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode;// For transmit phy setting in TXWI.
- RT_HT_PHY_INFO DesiredHtPhyInfo;
- DESIRED_TRANSMIT_SETTING DesiredTransmitSetting; // Desired transmit setting. this is for reading registry setting only. not useful.
- BOOLEAN bAutoTxRateSwitch;
-
- UCHAR DefaultKeyId;
-
- UCHAR TxRate; // RATE_1, RATE_2, RATE_5_5, RATE_11, ...
- UCHAR DesiredRates[MAX_LEN_OF_SUPPORTED_RATES];// OID_802_11_DESIRED_RATES
- UCHAR DesiredRatesIndex;
- UCHAR MaxTxRate; // RATE_1, RATE_2, RATE_5_5, RATE_11
-
- UCHAR TimBitmaps[WLAN_MAX_NUM_OF_TIM];
-
- // WPA
- UCHAR GMK[32];
- UCHAR PMK[32];
- UCHAR GTK[32];
- BOOLEAN IEEE8021X;
- BOOLEAN PreAuth;
- UCHAR GNonce[32];
- UCHAR PortSecured;
- NDIS_802_11_PRIVACY_FILTER PrivacyFilter;
- UCHAR BANClass3Data;
- ULONG IsolateInterStaTraffic;
-
- UCHAR RSNIE_Len[2];
- UCHAR RSN_IE[2][MAX_LEN_OF_RSNIE];
-
-
- UCHAR TimIELocationInBeacon;
- UCHAR CapabilityInfoLocationInBeacon;
- // outgoing BEACON frame buffer and corresponding TXWI
- // PTXWI_STRUC BeaconTxWI; //
- CHAR BeaconBuf[MAX_BEACON_SIZE]; // NOTE: BeaconBuf should be 4-byte aligned
-
- BOOLEAN bHideSsid;
- UINT16 StationKeepAliveTime; // unit: second
-
- USHORT VLAN_VID;
- USHORT VLAN_Priority;
-
- RT_802_11_ACL AccessControlList;
-
- // EDCA Qos
- BOOLEAN bWmmCapable; // 0:disable WMM, 1:enable WMM
- BOOLEAN bDLSCapable; // 0:disable DLS, 1:enable DLS
-
- UCHAR DlsPTK[64]; // Due to windows dirver count on meetinghouse to handle 4-way shake
-
- // For 802.1x daemon setting per BSS
- UCHAR radius_srv_num;
- RADIUS_SRV_INFO radius_srv_info[MAX_RADIUS_SRV_NUM];
-
-#ifdef RTL865X_SOC
- unsigned int mylinkid;
-#endif
-
-
- UINT32 RcvdConflictSsidCount;
- UINT32 RcvdSpoofedAssocRespCount;
- UINT32 RcvdSpoofedReassocRespCount;
- UINT32 RcvdSpoofedProbeRespCount;
- UINT32 RcvdSpoofedBeaconCount;
- UINT32 RcvdSpoofedDisassocCount;
- UINT32 RcvdSpoofedAuthCount;
- UINT32 RcvdSpoofedDeauthCount;
- UINT32 RcvdSpoofedUnknownMgmtCount;
- UINT32 RcvdReplayAttackCount;
-
- CHAR RssiOfRcvdConflictSsid;
- CHAR RssiOfRcvdSpoofedAssocResp;
- CHAR RssiOfRcvdSpoofedReassocResp;
- CHAR RssiOfRcvdSpoofedProbeResp;
- CHAR RssiOfRcvdSpoofedBeacon;
- CHAR RssiOfRcvdSpoofedDisassoc;
- CHAR RssiOfRcvdSpoofedAuth;
- CHAR RssiOfRcvdSpoofedDeauth;
- CHAR RssiOfRcvdSpoofedUnknownMgmt;
- CHAR RssiOfRcvdReplayAttack;
-
- BOOLEAN bBcnSntReq;
- UCHAR BcnBufIdx;
-} MULTISSID_STRUCT, *PMULTISSID_STRUCT;
-
-// configuration common to OPMODE_AP as well as OPMODE_STA
-typedef struct _COMMON_CONFIG {
-
- BOOLEAN bCountryFlag;
- UCHAR CountryCode[3];
- UCHAR Geography;
- UCHAR CountryRegion; // Enum of country region, 0:FCC, 1:IC, 2:ETSI, 3:SPAIN, 4:France, 5:MKK, 6:MKK1, 7:Israel
- UCHAR CountryRegionForABand; // Enum of country region for A band
- UCHAR PhyMode; // PHY_11A, PHY_11B, PHY_11BG_MIXED, PHY_ABG_MIXED
- USHORT Dsifs; // in units of usec
- ULONG PacketFilter; // Packet filter for receiving
-
- CHAR Ssid[MAX_LEN_OF_SSID]; // NOT NULL-terminated
- UCHAR SsidLen; // the actual ssid length in used
- UCHAR LastSsidLen; // the actual ssid length in used
- CHAR LastSsid[MAX_LEN_OF_SSID]; // NOT NULL-terminated
- UCHAR LastBssid[MAC_ADDR_LEN];
-
- UCHAR Bssid[MAC_ADDR_LEN];
- USHORT BeaconPeriod;
- UCHAR Channel;
- UCHAR CentralChannel; // Central Channel when using 40MHz is indicating. not real channel.
-
- UCHAR SupRate[MAX_LEN_OF_SUPPORTED_RATES];
- UCHAR SupRateLen;
- UCHAR ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
- UCHAR ExtRateLen;
- UCHAR DesireRate[MAX_LEN_OF_SUPPORTED_RATES]; // OID_802_11_DESIRED_RATES
- UCHAR MaxDesiredRate;
- UCHAR ExpectedACKRate[MAX_LEN_OF_SUPPORTED_RATES];
-
- ULONG BasicRateBitmap; // backup basic ratebitmap
-
- BOOLEAN bAPSDCapable;
- BOOLEAN bInServicePeriod;
- BOOLEAN bAPSDAC_BE;
- BOOLEAN bAPSDAC_BK;
- BOOLEAN bAPSDAC_VI;
- BOOLEAN bAPSDAC_VO;
- BOOLEAN bNeedSendTriggerFrame;
- BOOLEAN bAPSDForcePowerSave; // Force power save mode, should only use in APSD-STAUT
- ULONG TriggerTimerCount;
- UCHAR MaxSPLength;
- UCHAR BBPCurrentBW; // BW_10, BW_20, BW_40
- REG_TRANSMIT_SETTING RegTransmitSetting; //registry transmit setting. this is for reading registry setting only. not useful.
- UCHAR TxRate; // Same value to fill in TXD. TxRate is 6-bit
- UCHAR MaxTxRate; // RATE_1, RATE_2, RATE_5_5, RATE_11
- UCHAR TxRateIndex; // Tx rate index in RateSwitchTable
- UCHAR TxRateTableSize; // Valid Tx rate table size in RateSwitchTable
- UCHAR MinTxRate; // RATE_1, RATE_2, RATE_5_5, RATE_11
- UCHAR RtsRate; // RATE_xxx
- HTTRANSMIT_SETTING MlmeTransmit; // MGMT frame PHY rate setting when operatin at Ht rate.
- UCHAR MlmeRate; // RATE_xxx, used to send MLME frames
- UCHAR BasicMlmeRate; // Default Rate for sending MLME frames
-
- USHORT RtsThreshold; // in unit of BYTE
- USHORT FragmentThreshold; // in unit of BYTE
-
- UCHAR TxPower; // in unit of mW
- ULONG TxPowerPercentage; // 0~100 %
- ULONG TxPowerDefault; // keep for TxPowerPercentage
-
- BACAP_STRUC BACapability; // NO USE = 0XFF ; IMMED_BA =1 ; DELAY_BA=0
- BACAP_STRUC REGBACapability; // NO USE = 0XFF ; IMMED_BA =1 ; DELAY_BA=0
-
- IOT_STRUC IOTestParm; // 802.11n InterOpbility Test Parameter;
- ULONG TxPreamble; // Rt802_11PreambleLong, Rt802_11PreambleShort, Rt802_11PreambleAuto
- BOOLEAN bUseZeroToDisableFragment; // Microsoft use 0 as disable
- ULONG UseBGProtection; // 0: auto, 1: always use, 2: always not use
- BOOLEAN bUseShortSlotTime; // 0: disable, 1 - use short slot (9us)
- BOOLEAN bEnableTxBurst; // 1: enble TX PACKET BURST, 0: disable TX PACKET BURST
- BOOLEAN bAggregationCapable; // 1: enable TX aggregation when the peer supports it
- BOOLEAN bPiggyBackCapable; // 1: enable TX piggy-back according MAC's version
- BOOLEAN bIEEE80211H; // 1: enable IEEE802.11h spec.
- ULONG DisableOLBCDetect; // 0: enable OLBC detect; 1 disable OLBC detect
-
- BOOLEAN bRdg;
-
- BOOLEAN bWmmCapable; // 0:disable WMM, 1:enable WMM
- QOS_CAPABILITY_PARM APQosCapability; // QOS capability of the current associated AP
- EDCA_PARM APEdcaParm; // EDCA parameters of the current associated AP
- QBSS_LOAD_PARM APQbssLoad; // QBSS load of the current associated AP
- UCHAR AckPolicy[4]; // ACK policy of the specified AC. see ACK_xxx
- BOOLEAN bDLSCapable; // 0:disable DLS, 1:enable DLS
- // a bitmap of BOOLEAN flags. each bit represent an operation status of a particular
- // BOOLEAN control, either ON or OFF. These flags should always be accessed via
- // OPSTATUS_TEST_FLAG(), OPSTATUS_SET_FLAG(), OP_STATUS_CLEAR_FLAG() macros.
- // see fOP_STATUS_xxx in RTMP_DEF.C for detail bit definition
- ULONG OpStatusFlags;
-
- BOOLEAN NdisRadioStateOff; //For HCT 12.0, set this flag to TRUE instead of called MlmeRadioOff.
- ABGBAND_STATE BandState; // For setting BBP used on B/G or A mode.
-#ifdef RT30xx
- BOOLEAN bRxAntDiversity; // 0:disable, 1:enable Software Rx Antenna Diversity.
-#endif
-
- // IEEE802.11H--DFS.
- RADAR_DETECT_STRUCT RadarDetect;
-
- // HT
- UCHAR BASize; // USer desired BAWindowSize. Should not exceed our max capability
- //RT_HT_CAPABILITY SupportedHtPhy;
- RT_HT_CAPABILITY DesiredHtPhy;
- HT_CAPABILITY_IE HtCapability;
- ADD_HT_INFO_IE AddHTInfo; // Useful as AP.
- //This IE is used with channel switch announcement element when changing to a new 40MHz.
- //This IE is included in channel switch ammouncement frames 7.4.1.5, beacons, probe Rsp.
- NEW_EXT_CHAN_IE NewExtChanOffset; //7.3.2.20A, 1 if extension channel is above the control channel, 3 if below, 0 if not present
-
- BOOLEAN bHTProtect;
- BOOLEAN bMIMOPSEnable;
- BOOLEAN bBADecline;
- BOOLEAN bDisableReordering;
- BOOLEAN bForty_Mhz_Intolerant;
- BOOLEAN bExtChannelSwitchAnnouncement;
- BOOLEAN bRcvBSSWidthTriggerEvents;
- ULONG LastRcvBSSWidthTriggerEventsTime;
-
- UCHAR TxBASize;
-
- // Enable wireless event
- BOOLEAN bWirelessEvent;
- BOOLEAN bWiFiTest; // Enable this parameter for WiFi test
-
- // Tx & Rx Stream number selection
- UCHAR TxStream;
- UCHAR RxStream;
-
- // transmit phy mode, trasmit rate for Multicast.
-#ifdef MCAST_RATE_SPECIFIC
- UCHAR McastTransmitMcs;
- UCHAR McastTransmitPhyMode;
-#endif // MCAST_RATE_SPECIFIC //
-
- BOOLEAN bHardwareRadio; // Hardware controlled Radio enabled
-
-#ifdef RT2870
- BOOLEAN bMultipleIRP; // Multiple Bulk IN flag
- UCHAR NumOfBulkInIRP; // if bMultipleIRP == TRUE, NumOfBulkInIRP will be 4 otherwise be 1
- RT_HT_CAPABILITY SupportedHtPhy;
- ULONG MaxPktOneTxBulk;
- UCHAR TxBulkFactor;
- UCHAR RxBulkFactor;
-
- BEACON_SYNC_STRUCT *pBeaconSync;
- RALINK_TIMER_STRUCT BeaconUpdateTimer;
- UINT32 BeaconAdjust;
- UINT32 BeaconFactor;
- UINT32 BeaconRemain;
-#endif // RT2870 //
-
-
- NDIS_SPIN_LOCK MeasureReqTabLock;
- PMEASURE_REQ_TAB pMeasureReqTab;
-
- NDIS_SPIN_LOCK TpcReqTabLock;
- PTPC_REQ_TAB pTpcReqTab;
-
- // transmit phy mode, trasmit rate for Multicast.
-#ifdef MCAST_RATE_SPECIFIC
- HTTRANSMIT_SETTING MCastPhyMode;
-#endif // MCAST_RATE_SPECIFIC //
-} COMMON_CONFIG, *PCOMMON_CONFIG;
-
-/* Modified by Wu Xi-Kun 4/21/2006 */
-// STA configuration and status
-typedef struct _STA_ADMIN_CONFIG {
- // GROUP 1 -
- // User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe
- // the user intended configuration, but not necessary fully equal to the final
- // settings in ACTIVE BSS after negotiation/compromize with the BSS holder (either
- // AP or IBSS holder).
- // Once initialized, user configuration can only be changed via OID_xxx
- UCHAR BssType; // BSS_INFRA or BSS_ADHOC
- USHORT AtimWin; // used when starting a new IBSS
-
- // GROUP 2 -
- // User configuration loaded from Registry, E2PROM or OID_xxx. These settings describe
- // the user intended configuration, and should be always applied to the final
- // settings in ACTIVE BSS without compromising with the BSS holder.
- // Once initialized, user configuration can only be changed via OID_xxx
- UCHAR RssiTrigger;
- UCHAR RssiTriggerMode; // RSSI_TRIGGERED_UPON_BELOW_THRESHOLD or RSSI_TRIGGERED_UPON_EXCCEED_THRESHOLD
- USHORT DefaultListenCount; // default listen count;
- ULONG WindowsPowerMode; // Power mode for AC power
- ULONG WindowsBatteryPowerMode; // Power mode for battery if exists
- BOOLEAN bWindowsACCAMEnable; // Enable CAM power mode when AC on
- BOOLEAN bAutoReconnect; // Set to TRUE when setting OID_802_11_SSID with no matching BSSID
- ULONG WindowsPowerProfile; // Windows power profile, for NDIS5.1 PnP
-
- // MIB:ieee802dot11.dot11smt(1).dot11StationConfigTable(1)
- USHORT Psm; // power management mode (PWR_ACTIVE|PWR_SAVE)
- USHORT DisassocReason;
- UCHAR DisassocSta[MAC_ADDR_LEN];
- USHORT DeauthReason;
- UCHAR DeauthSta[MAC_ADDR_LEN];
- USHORT AuthFailReason;
- UCHAR AuthFailSta[MAC_ADDR_LEN];
-
- NDIS_802_11_PRIVACY_FILTER PrivacyFilter; // PrivacyFilter enum for 802.1X
- NDIS_802_11_AUTHENTICATION_MODE AuthMode; // This should match to whatever microsoft defined
- NDIS_802_11_WEP_STATUS WepStatus;
- NDIS_802_11_WEP_STATUS OrigWepStatus; // Original wep status set from OID
-
- // Add to support different cipher suite for WPA2/WPA mode
- NDIS_802_11_ENCRYPTION_STATUS GroupCipher; // Multicast cipher suite
- NDIS_802_11_ENCRYPTION_STATUS PairCipher; // Unicast cipher suite
- BOOLEAN bMixCipher; // Indicate current Pair & Group use different cipher suites
- USHORT RsnCapability;
-
- NDIS_802_11_WEP_STATUS GroupKeyWepStatus;
-
- UCHAR PMK[32]; // WPA PSK mode PMK
- UCHAR PTK[64]; // WPA PSK mode PTK
- UCHAR GTK[32]; // GTK from authenticator
- BSSID_INFO SavedPMK[PMKID_NO];
- UINT SavedPMKNum; // Saved PMKID number
-
- UCHAR DefaultKeyId;
-
-
- // WPA 802.1x port control, WPA_802_1X_PORT_SECURED, WPA_802_1X_PORT_NOT_SECURED
- UCHAR PortSecured;
-
- // For WPA countermeasures
- ULONG LastMicErrorTime; // record last MIC error time
- ULONG MicErrCnt; // Should be 0, 1, 2, then reset to zero (after disassoiciation).
- BOOLEAN bBlockAssoc; // Block associate attempt for 60 seconds after counter measure occurred.
- // For WPA-PSK supplicant state
- WPA_STATE WpaState; // Default is SS_NOTUSE and handled by microsoft 802.1x
- UCHAR ReplayCounter[8];
- UCHAR ANonce[32]; // ANonce for WPA-PSK from aurhenticator
- UCHAR SNonce[32]; // SNonce for WPA-PSK
-
- UCHAR LastSNR0; // last received BEACON's SNR
- UCHAR LastSNR1; // last received BEACON's SNR for 2nd antenna
- RSSI_SAMPLE RssiSample;
- ULONG NumOfAvgRssiSample;
-
- ULONG LastBeaconRxTime; // OS's timestamp of the last BEACON RX time
- ULONG Last11bBeaconRxTime; // OS's timestamp of the last 11B BEACON RX time
- ULONG Last11gBeaconRxTime; // OS's timestamp of the last 11G BEACON RX time
- ULONG Last20NBeaconRxTime; // OS's timestamp of the last 20MHz N BEACON RX time
-
- ULONG LastScanTime; // Record last scan time for issue BSSID_SCAN_LIST
- ULONG ScanCnt; // Scan counts since most recent SSID, BSSID, SCAN OID request
- BOOLEAN bSwRadio; // Software controlled Radio On/Off, TRUE: On
- BOOLEAN bHwRadio; // Hardware controlled Radio On/Off, TRUE: On
- BOOLEAN bRadio; // Radio state, And of Sw & Hw radio state
- BOOLEAN bHardwareRadio; // Hardware controlled Radio enabled
- BOOLEAN bShowHiddenSSID; // Show all known SSID in SSID list get operation
-
-
- // New for WPA, windows want us to to keep association information and
- // Fixed IEs from last association response
- NDIS_802_11_ASSOCIATION_INFORMATION AssocInfo;
- USHORT ReqVarIELen; // Length of next VIE include EID & Length
- UCHAR ReqVarIEs[MAX_VIE_LEN]; // The content saved here should be little-endian format.
- USHORT ResVarIELen; // Length of next VIE include EID & Length
- UCHAR ResVarIEs[MAX_VIE_LEN];
-
- UCHAR RSNIE_Len;
- UCHAR RSN_IE[MAX_LEN_OF_RSNIE]; // The content saved here should be little-endian format.
-
- // New variables used for CCX 1.0
- BOOLEAN bCkipOn;
- BOOLEAN bCkipCmicOn;
- UCHAR CkipFlag;
- UCHAR GIV[3]; //for CCX iv
- UCHAR RxSEQ[4];
- UCHAR TxSEQ[4];
- UCHAR CKIPMIC[4];
- UCHAR LeapAuthMode;
- LEAP_AUTH_INFO LeapAuthInfo;
- UCHAR HashPwd[16];
- UCHAR NetworkChallenge[8];
- UCHAR NetworkChallengeResponse[24];
- UCHAR PeerChallenge[8];
-
- UCHAR PeerChallengeResponse[24];
- UCHAR SessionKey[16]; //Network session keys (NSK)
- RALINK_TIMER_STRUCT LeapAuthTimer;
- ROGUEAP_TABLE RogueApTab; //Cisco CCX1 Rogue AP Detection
-
- // New control flags for CCX
- CCX_CONTROL CCXControl; // Master administration state
- BOOLEAN CCXEnable; // Actual CCX state
- UCHAR CCXScanChannel; // Selected channel for CCX beacon request
- USHORT CCXScanTime; // Time out to wait for beacon and probe response
- UCHAR CCXReqType; // Current processing CCX request type
- BSS_TABLE CCXBssTab; // BSS Table
- UCHAR FrameReportBuf[2048]; // Buffer for creating frame report
- USHORT FrameReportLen; // Current Frame report length
- ULONG CLBusyBytes; // Save the total bytes received durning channel load scan time
- USHORT RPIDensity[8]; // Array for RPI density collection
- // Start address of each BSS table within FrameReportBuf
- // It's important to update the RxPower of the corresponding Bss
- USHORT BssReportOffset[MAX_LEN_OF_BSS_TABLE];
- USHORT BeaconToken; // Token for beacon report
- ULONG LastBssIndex; // Most current reported Bss index
- RM_REQUEST_ACTION MeasurementRequest[16]; // Saved measurement request
- UCHAR RMReqCnt; // Number of measurement request saved.
- UCHAR CurrentRMReqIdx; // Number of measurement request saved.
- BOOLEAN ParallelReq; // Parallel measurement, only one request performed,
- // It must be the same channel with maximum duration
- USHORT ParallelDuration; // Maximum duration for parallel measurement
- UCHAR ParallelChannel; // Only one channel with parallel measurement
- USHORT IAPPToken; // IAPP dialog token
- UCHAR CCXQosECWMin; // Cisco QOS ECWMin for AC 0
- UCHAR CCXQosECWMax; // Cisco QOS ECWMax for AC 0
- // Hack for channel load and noise histogram parameters
- UCHAR NHFactor; // Parameter for Noise histogram
- UCHAR CLFactor; // Parameter for channel load
-
- UCHAR KRK[16]; //Key Refresh Key.
- UCHAR BTK[32]; //Base Transient Key
- BOOLEAN CCKMLinkUpFlag;
- ULONG CCKMRN; //(Re)Association request number.
- LARGE_INTEGER CCKMBeaconAtJoinTimeStamp; //TSF timer for Re-assocaite to the new AP
- UCHAR AironetCellPowerLimit; //in dBm
- UCHAR AironetIPAddress[4]; //eg. 192.168.1.1
- BOOLEAN CCXAdjacentAPReportFlag; //flag for determining report Assoc Lost time
- CHAR CCXAdjacentAPSsid[MAX_LEN_OF_SSID]; //Adjacent AP's SSID report
- UCHAR CCXAdjacentAPSsidLen; // the actual ssid length in used
- UCHAR CCXAdjacentAPBssid[MAC_ADDR_LEN]; //Adjacent AP's BSSID report
- USHORT CCXAdjacentAPChannel;
- ULONG CCXAdjacentAPLinkDownTime; //for Spec S32.
-
- RALINK_TIMER_STRUCT StaQuickResponeForRateUpTimer;
- BOOLEAN StaQuickResponeForRateUpTimerRunning;
-
- UCHAR DtimCount; // 0.. DtimPeriod-1
- UCHAR DtimPeriod; // default = 3
-
- ////////////////////////////////////////////////////////////////////////////////////////
- // This is only for WHQL test.
- BOOLEAN WhqlTest;
- ////////////////////////////////////////////////////////////////////////////////////////
-
- RALINK_TIMER_STRUCT WpaDisassocAndBlockAssocTimer;
- // Fast Roaming
- BOOLEAN bFastRoaming; // 0:disable fast roaming, 1:enable fast roaming
- CHAR dBmToRoam; // the condition to roam when receiving Rssi less than this value. It's negative value.
-
- BOOLEAN IEEE8021X;
- BOOLEAN IEEE8021x_required_keys;
- CIPHER_KEY DesireSharedKey[4]; // Record user desired WEP keys
- UCHAR DesireSharedKeyId;
-
- // 0: driver ignores wpa_supplicant
- // 1: wpa_supplicant initiates scanning and AP selection
- // 2: driver takes care of scanning, AP selection, and IEEE 802.11 association parameters
- UCHAR WpaSupplicantUP;
- UCHAR WpaSupplicantScanCount;
-
- CHAR dev_name[16];
- USHORT OriDevType;
-
- BOOLEAN bTGnWifiTest;
- BOOLEAN bScanReqIsFromWebUI;
-
- HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode;// For transmit phy setting in TXWI.
- DESIRED_TRANSMIT_SETTING DesiredTransmitSetting;
- RT_HT_PHY_INFO DesiredHtPhyInfo;
- BOOLEAN bAutoTxRateSwitch;
-} STA_ADMIN_CONFIG, *PSTA_ADMIN_CONFIG;
-
-// This data structure keep the current active BSS/IBSS's configuration that this STA
-// had agreed upon joining the network. Which means these parameters are usually decided
-// by the BSS/IBSS creator instead of user configuration. Data in this data structurre
-// is valid only when either ADHOC_ON(pAd) or INFRA_ON(pAd) is TRUE.
-// Normally, after SCAN or failed roaming attempts, we need to recover back to
-// the current active settings.
-typedef struct _STA_ACTIVE_CONFIG {
- USHORT Aid;
- USHORT AtimWin; // in kusec; IBSS parameter set element
- USHORT CapabilityInfo;
- USHORT CfpMaxDuration;
- USHORT CfpPeriod;
-
- // Copy supported rate from desired AP's beacon. We are trying to match
- // AP's supported and extended rate settings.
- UCHAR SupRate[MAX_LEN_OF_SUPPORTED_RATES];
- UCHAR ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
- UCHAR SupRateLen;
- UCHAR ExtRateLen;
- // Copy supported ht from desired AP's beacon. We are trying to match
- RT_HT_PHY_INFO SupportedPhyInfo;
- RT_HT_CAPABILITY SupportedHtPhy;
-} STA_ACTIVE_CONFIG, *PSTA_ACTIVE_CONFIG;
-
-#ifdef RT2870
-// for USB interface, avoid in interrupt when write key
-typedef struct RT_ADD_PAIRWISE_KEY_ENTRY {
- NDIS_802_11_MAC_ADDRESS MacAddr;
- USHORT MacTabMatchWCID; // ASIC
- CIPHER_KEY CipherKey;
-} RT_ADD_PAIRWISE_KEY_ENTRY,*PRT_ADD_PAIRWISE_KEY_ENTRY;
-#endif // RT2870 //
-
-// ----------- start of AP --------------------------
-// AUTH-RSP State Machine Aux data structure
-typedef struct _AP_MLME_AUX {
- UCHAR Addr[MAC_ADDR_LEN];
- USHORT Alg;
- CHAR Challenge[CIPHER_TEXT_LEN];
-} AP_MLME_AUX, *PAP_MLME_AUX;
-
-// structure to define WPA Group Key Rekey Interval
-typedef struct PACKED _RT_802_11_WPA_REKEY {
- ULONG ReKeyMethod; // mechanism for rekeying: 0:disable, 1: time-based, 2: packet-based
- ULONG ReKeyInterval; // time-based: seconds, packet-based: kilo-packets
-} RT_WPA_REKEY,*PRT_WPA_REKEY, RT_802_11_WPA_REKEY, *PRT_802_11_WPA_REKEY;
-
-typedef struct _MAC_TABLE_ENTRY {
- //Choose 1 from ValidAsWDS and ValidAsCLI to validize.
- BOOLEAN ValidAsCLI; // Sta mode, set this TRUE after Linkup,too.
- BOOLEAN ValidAsWDS; // This is WDS Entry. only for AP mode.
- BOOLEAN ValidAsApCli; //This is a AP-Client entry, only for AP mode which enable AP-Client functions.
- BOOLEAN ValidAsMesh;
- BOOLEAN ValidAsDls; // This is DLS Entry. only for STA mode.
- BOOLEAN isCached;
- BOOLEAN bIAmBadAtheros; // Flag if this is Atheros chip that has IOT problem. We need to turn on RTS/CTS protection.
-
- UCHAR EnqueueEapolStartTimerRunning; // Enqueue EAPoL-Start for triggering EAP SM
- //jan for wpa
- // record which entry revoke MIC Failure , if it leaves the BSS itself, AP won't update aMICFailTime MIB
- UCHAR CMTimerRunning;
- UCHAR apidx; // MBSS number
- UCHAR RSNIE_Len;
- UCHAR RSN_IE[MAX_LEN_OF_RSNIE];
- UCHAR ANonce[LEN_KEY_DESC_NONCE];
- UCHAR R_Counter[LEN_KEY_DESC_REPLAY];
- UCHAR PTK[64];
- UCHAR ReTryCounter;
- RALINK_TIMER_STRUCT RetryTimer;
- RALINK_TIMER_STRUCT EnqueueStartForPSKTimer; // A timer which enqueue EAPoL-Start for triggering PSK SM
- NDIS_802_11_AUTHENTICATION_MODE AuthMode; // This should match to whatever microsoft defined
- NDIS_802_11_WEP_STATUS WepStatus;
- AP_WPA_STATE WpaState;
- GTK_STATE GTKState;
- USHORT PortSecured;
- NDIS_802_11_PRIVACY_FILTER PrivacyFilter; // PrivacyFilter enum for 802.1X
- CIPHER_KEY PairwiseKey;
- PVOID pAd;
- INT PMKID_CacheIdx;
- UCHAR PMKID[LEN_PMKID];
-
-
- UCHAR Addr[MAC_ADDR_LEN];
- UCHAR PsMode;
- SST Sst;
- AUTH_STATE AuthState; // for SHARED KEY authentication state machine used only
- BOOLEAN IsReassocSta; // Indicate whether this is a reassociation procedure
- USHORT Aid;
- USHORT CapabilityInfo;
- UCHAR LastRssi;
- ULONG NoDataIdleCount;
- UINT16 StationKeepAliveCount; // unit: second
- ULONG PsQIdleCount;
- QUEUE_HEADER PsQueue;
-
- UINT32 StaConnectTime; // the live time of this station since associated with AP
-
- BOOLEAN bSendBAR;
- USHORT NoBADataCountDown;
-
- UINT32 CachedBuf[16]; // UINT (4 bytes) for alignment
- UINT TxBFCount; // 3*3
- UINT FIFOCount;
- UINT DebugFIFOCount;
- UINT DebugTxCount;
- BOOLEAN bDlsInit;
-
-
-//====================================================
-//WDS entry needs these
-// rt2860 add this. if ValidAsWDS==TRUE, MatchWDSTabIdx is the index in WdsTab.MacTab
- UINT MatchWDSTabIdx;
- UCHAR MaxSupportedRate;
- UCHAR CurrTxRate;
- UCHAR CurrTxRateIndex;
- // to record the each TX rate's quality. 0 is best, the bigger the worse.
- USHORT TxQuality[MAX_STEP_OF_TX_RATE_SWITCH];
- UINT32 OneSecTxNoRetryOkCount;
- UINT32 OneSecTxRetryOkCount;
- UINT32 OneSecTxFailCount;
- UINT32 ContinueTxFailCnt;
- UINT32 CurrTxRateStableTime; // # of second in current TX rate
- UCHAR TxRateUpPenalty; // extra # of second penalty due to last unstable condition
-//====================================================
-
- BOOLEAN fNoisyEnvironment;
- BOOLEAN fLastSecAccordingRSSI;
- UCHAR LastSecTxRateChangeAction; // 0: no change, 1:rate UP, 2:rate down
- CHAR LastTimeTxRateChangeAction; //Keep last time value of LastSecTxRateChangeAction
- ULONG LastTxOkCount;
- UCHAR PER[MAX_STEP_OF_TX_RATE_SWITCH];
-
- // a bitmap of BOOLEAN flags. each bit represent an operation status of a particular
- // BOOLEAN control, either ON or OFF. These flags should always be accessed via
- // CLIENT_STATUS_TEST_FLAG(), CLIENT_STATUS_SET_FLAG(), CLIENT_STATUS_CLEAR_FLAG() macros.
- // see fOP_STATUS_xxx in RTMP_DEF.C for detail bit definition. fCLIENT_STATUS_AMSDU_INUSED
- ULONG ClientStatusFlags;
-
- HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode;// For transmit phy setting in TXWI.
-
- // HT EWC MIMO-N used parameters
- USHORT RXBAbitmap; // fill to on-chip RXWI_BA_BITMASK in 8.1.3RX attribute entry format
- USHORT TXBAbitmap; // This bitmap as originator, only keep in software used to mark AMPDU bit in TXWI
- USHORT TXAutoBAbitmap;
- USHORT BADeclineBitmap;
- USHORT BARecWcidArray[NUM_OF_TID]; // The mapping wcid of recipient session. if RXBAbitmap bit is masked
- USHORT BAOriWcidArray[NUM_OF_TID]; // The mapping wcid of originator session. if TXBAbitmap bit is masked
- USHORT BAOriSequence[NUM_OF_TID]; // The mapping wcid of originator session. if TXBAbitmap bit is masked
-
- // 802.11n features.
- UCHAR MpduDensity;
- UCHAR MaxRAmpduFactor;
- UCHAR AMsduSize;
- UCHAR MmpsMode; // MIMO power save more.
-
- HT_CAPABILITY_IE HTCapability;
-
- BOOLEAN bAutoTxRateSwitch;
-
- UCHAR RateLen;
- struct _MAC_TABLE_ENTRY *pNext;
- USHORT TxSeq[NUM_OF_TID];
- USHORT NonQosDataSeq;
-
- RSSI_SAMPLE RssiSample;
-
- UINT32 TXMCSExpected[16];
- UINT32 TXMCSSuccessful[16];
- UINT32 TXMCSFailed[16];
- UINT32 TXMCSAutoFallBack[16][16];
-
- ULONG LastBeaconRxTime;
-} MAC_TABLE_ENTRY, *PMAC_TABLE_ENTRY;
-
-typedef struct _MAC_TABLE {
- USHORT Size;
- MAC_TABLE_ENTRY *Hash[HASH_TABLE_SIZE];
- MAC_TABLE_ENTRY Content[MAX_LEN_OF_MAC_TABLE];
- QUEUE_HEADER McastPsQueue;
- ULONG PsQIdleCount;
- BOOLEAN fAnyStationInPsm;
- BOOLEAN fAnyStationBadAtheros; // Check if any Station is atheros 802.11n Chip. We need to use RTS/CTS with Atheros 802,.11n chip.
- BOOLEAN fAnyTxOPForceDisable; // Check if it is necessary to disable BE TxOP
- BOOLEAN fAllStationAsRalink; // Check if all stations are ralink-chipset
- BOOLEAN fAnyStationIsLegacy; // Check if I use legacy rate to transmit to my BSS Station/
- BOOLEAN fAnyStationNonGF; // Check if any Station can't support GF.
- BOOLEAN fAnyStation20Only; // Check if any Station can't support GF.
- BOOLEAN fAnyStationMIMOPSDynamic; // Check if any Station is MIMO Dynamic
- BOOLEAN fAnyBASession; // Check if there is BA session. Force turn on RTS/CTS
-} MAC_TABLE, *PMAC_TABLE;
-
-#define IS_HT_STA(_pMacEntry) \
- (_pMacEntry->MaxHTPhyMode.field.MODE >= MODE_HTMIX)
-
-#define IS_HT_RATE(_pMacEntry) \
- (_pMacEntry->HTPhyMode.field.MODE >= MODE_HTMIX)
-
-#define PEER_IS_HT_RATE(_pMacEntry) \
- (_pMacEntry->HTPhyMode.field.MODE >= MODE_HTMIX)
-
-typedef struct _WDS_ENTRY {
- BOOLEAN Valid;
- UCHAR Addr[MAC_ADDR_LEN];
- ULONG NoDataIdleCount;
- struct _WDS_ENTRY *pNext;
-} WDS_ENTRY, *PWDS_ENTRY;
-
-typedef struct _WDS_TABLE_ENTRY {
- USHORT Size;
- UCHAR WdsAddr[MAC_ADDR_LEN];
- WDS_ENTRY *Hash[HASH_TABLE_SIZE];
- WDS_ENTRY Content[MAX_LEN_OF_MAC_TABLE];
- UCHAR MaxSupportedRate;
- UCHAR CurrTxRate;
- USHORT TxQuality[MAX_LEN_OF_SUPPORTED_RATES];
- USHORT OneSecTxOkCount;
- USHORT OneSecTxRetryOkCount;
- USHORT OneSecTxFailCount;
- ULONG CurrTxRateStableTime; // # of second in current TX rate
- UCHAR TxRateUpPenalty; // extra # of second penalty due to last unstable condition
-} WDS_TABLE_ENTRY, *PWDS_TABLE_ENTRY;
-
-typedef struct _RT_802_11_WDS_ENTRY {
- PNET_DEV dev;
- UCHAR Valid;
- UCHAR PhyMode;
- UCHAR PeerWdsAddr[MAC_ADDR_LEN];
- UCHAR MacTabMatchWCID; // ASIC
- NDIS_802_11_WEP_STATUS WepStatus;
- UCHAR KeyIdx;
- CIPHER_KEY WdsKey;
- HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode;
- RT_HT_PHY_INFO DesiredHtPhyInfo;
- BOOLEAN bAutoTxRateSwitch;
- DESIRED_TRANSMIT_SETTING DesiredTransmitSetting; // Desired transmit setting.
-} RT_802_11_WDS_ENTRY, *PRT_802_11_WDS_ENTRY;
-
-typedef struct _WDS_TABLE {
- UCHAR Mode;
- ULONG Size;
- RT_802_11_WDS_ENTRY WdsEntry[MAX_WDS_ENTRY];
-} WDS_TABLE, *PWDS_TABLE;
-
-typedef struct _APCLI_STRUCT {
- PNET_DEV dev;
-#ifdef RTL865X_SOC
- unsigned int mylinkid;
-#endif
- BOOLEAN Enable; // Set it as 1 if the apcli interface was configured to "1" or by iwpriv cmd "ApCliEnable"
- BOOLEAN Valid; // Set it as 1 if the apcli interface associated success to remote AP.
- UCHAR MacTabWCID; //WCID value, which point to the entry of ASIC Mac table.
- UCHAR SsidLen;
- CHAR Ssid[MAX_LEN_OF_SSID];
-
- UCHAR CfgSsidLen;
- CHAR CfgSsid[MAX_LEN_OF_SSID];
- UCHAR CfgApCliBssid[ETH_LENGTH_OF_ADDRESS];
- UCHAR CurrentAddress[ETH_LENGTH_OF_ADDRESS];
-
- ULONG ApCliRcvBeaconTime;
-
- ULONG CtrlCurrState;
- ULONG SyncCurrState;
- ULONG AuthCurrState;
- ULONG AssocCurrState;
- ULONG WpaPskCurrState;
-
- USHORT AuthReqCnt;
- USHORT AssocReqCnt;
-
- ULONG ClientStatusFlags;
- UCHAR MpduDensity;
-
- NDIS_802_11_AUTHENTICATION_MODE AuthMode; // This should match to whatever microsoft defined
- NDIS_802_11_WEP_STATUS WepStatus;
-
- // Add to support different cipher suite for WPA2/WPA mode
- NDIS_802_11_ENCRYPTION_STATUS GroupCipher; // Multicast cipher suite
- NDIS_802_11_ENCRYPTION_STATUS PairCipher; // Unicast cipher suite
- BOOLEAN bMixCipher; // Indicate current Pair & Group use different cipher suites
- USHORT RsnCapability;
-
- UCHAR PSK[100]; // reserve PSK key material
- UCHAR PSKLen;
- UCHAR PMK[32]; // WPA PSK mode PMK
- UCHAR GTK[32]; // GTK from authenticator
-
- CIPHER_KEY SharedKey[SHARE_KEY_NUM];
- UCHAR DefaultKeyId;
-
- // store RSN_IE built by driver
- UCHAR RSN_IE[MAX_LEN_OF_RSNIE]; // The content saved here should be convert to little-endian format.
- UCHAR RSNIE_Len;
-
- // For WPA countermeasures
- ULONG LastMicErrorTime; // record last MIC error time
- BOOLEAN bBlockAssoc; // Block associate attempt for 60 seconds after counter measure occurred.
-
- // For WPA-PSK supplicant state
- UCHAR SNonce[32]; // SNonce for WPA-PSK
- UCHAR GNonce[32]; // GNonce for WPA-PSK from authenticator
-
- HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode;
- RT_HT_PHY_INFO DesiredHtPhyInfo;
- BOOLEAN bAutoTxRateSwitch;
- DESIRED_TRANSMIT_SETTING DesiredTransmitSetting; // Desired transmit setting.
-} APCLI_STRUCT, *PAPCLI_STRUCT;
-
-// ----------- end of AP ----------------------------
-
-struct wificonf
-{
- BOOLEAN bShortGI;
- BOOLEAN bGreenField;
-};
-
-
-
-typedef struct _INF_PCI_CONFIG
-{
- PUCHAR CSRBaseAddress; // PCI MMIO Base Address, all access will use
-}INF_PCI_CONFIG;
-
-typedef struct _INF_USB_CONFIG
-{
- UINT BulkInEpAddr; // bulk-in endpoint address
- UINT BulkOutEpAddr[6]; // bulk-out endpoint address
-
-}INF_USB_CONFIG;
-
-#ifdef IKANOS_VX_1X0
- typedef void (*IkanosWlanTxCbFuncP)(void *, void *);
-
- struct IKANOS_TX_INFO
- {
- struct net_device *netdev;
- IkanosWlanTxCbFuncP *fp;
- };
-#endif // IKANOS_VX_1X0 //
-
-#ifdef DBG_DIAGNOSE
-#define DIAGNOSE_TIME 10 // 10 sec
-typedef struct _RtmpDiagStrcut_
-{ // Diagnosis Related element
- unsigned char inited;
- unsigned char qIdx;
- unsigned char ArrayStartIdx;
- unsigned char ArrayCurIdx;
- // Tx Related Count
- USHORT TxDataCnt[DIAGNOSE_TIME];
- USHORT TxFailCnt[DIAGNOSE_TIME];
- USHORT TxDescCnt[DIAGNOSE_TIME][24]; // 3*3 // TxDesc queue length in scale of 0~14, >=15
- USHORT TxMcsCnt[DIAGNOSE_TIME][24]; // 3*3
- USHORT TxSWQueCnt[DIAGNOSE_TIME][9]; // TxSwQueue length in scale of 0, 1, 2, 3, 4, 5, 6, 7, >=8
-
- USHORT TxAggCnt[DIAGNOSE_TIME];
- USHORT TxNonAggCnt[DIAGNOSE_TIME];
- USHORT TxAMPDUCnt[DIAGNOSE_TIME][24]; // 3*3 // 10 sec, TxDMA APMDU Aggregation count in range from 0 to 15, in setp of 1.
- USHORT TxRalinkCnt[DIAGNOSE_TIME]; // TxRalink Aggregation Count in 1 sec scale.
- USHORT TxAMSDUCnt[DIAGNOSE_TIME]; // TxAMSUD Aggregation Count in 1 sec scale.
-
- // Rx Related Count
- USHORT RxDataCnt[DIAGNOSE_TIME]; // Rx Total Data count.
- USHORT RxCrcErrCnt[DIAGNOSE_TIME];
- USHORT RxMcsCnt[DIAGNOSE_TIME][24]; // 3*3
-}RtmpDiagStruct;
-#endif // DBG_DIAGNOSE //
-
-
-//
-// The miniport adapter structure
-//
-typedef struct _RTMP_ADAPTER
-{
- PVOID OS_Cookie; // save specific structure relative to OS
- PNET_DEV net_dev;
- ULONG VirtualIfCnt;
-
-
-
- NDIS_SPIN_LOCK irq_lock;
- UCHAR irq_disabled;
-
-#ifdef RT2870
-/*****************************************************************************************/
-/* USB related parameters */
-/*****************************************************************************************/
- struct usb_config_descriptor *config;
- UINT BulkInEpAddr; // bulk-in endpoint address
- UINT BulkOutEpAddr[6]; // bulk-out endpoint address
-
- UINT NumberOfPipes;
- USHORT BulkOutMaxPacketSize;
- USHORT BulkInMaxPacketSize;
-
- //======Control Flags
- LONG PendingIoCount;
- ULONG BulkFlags;
- BOOLEAN bUsbTxBulkAggre; // Flags for bulk out data priority
-
-
- //======Timer Thread
- RT2870_TIMER_QUEUE TimerQ;
- NDIS_SPIN_LOCK TimerQLock;
-
-
- //======Cmd Thread
- CmdQ CmdQ;
- NDIS_SPIN_LOCK CmdQLock; // CmdQLock spinlock
-
- BOOLEAN TimerFunc_kill;
- BOOLEAN mlme_kill;
-
-
- //======Semaphores (event)
- struct semaphore mlme_semaphore; /* to sleep thread on */
- struct semaphore RTUSBCmd_semaphore; /* to sleep thread on */
- struct semaphore RTUSBTimer_semaphore;
-
- struct completion TimerQComplete;
- struct completion mlmeComplete;
- struct completion CmdQComplete;
- wait_queue_head_t *wait;
-#endif // RT2870 //
-
-
-/*****************************************************************************************/
- /* Both PCI/USB related parameters */
-/*****************************************************************************************/
-
-
-/*****************************************************************************************/
-/* Tx related parameters */
-/*****************************************************************************************/
- BOOLEAN DeQueueRunning[NUM_OF_TX_RING]; // for ensuring RTUSBDeQueuePacket get call once
- NDIS_SPIN_LOCK DeQueueLock[NUM_OF_TX_RING];
-
-#ifdef RT2870
- // Data related context and AC specified, 4 AC supported
- NDIS_SPIN_LOCK BulkOutLock[6]; // BulkOut spinlock for 4 ACs
- NDIS_SPIN_LOCK MLMEBulkOutLock; // MLME BulkOut lock
-
- HT_TX_CONTEXT TxContext[NUM_OF_TX_RING];
- NDIS_SPIN_LOCK TxContextQueueLock[NUM_OF_TX_RING]; // TxContextQueue spinlock
-
- // 4 sets of Bulk Out index and pending flag
- UCHAR NextBulkOutIndex[4]; // only used for 4 EDCA bulkout pipe
-
- BOOLEAN BulkOutPending[6]; // used for total 6 bulkout pipe
- UCHAR bulkResetPipeid;
- BOOLEAN MgmtBulkPending;
- ULONG bulkResetReq[6];
-#endif // RT2870 //
-
- // resource for software backlog queues
- QUEUE_HEADER TxSwQueue[NUM_OF_TX_RING]; // 4 AC + 1 HCCA
- NDIS_SPIN_LOCK TxSwQueueLock[NUM_OF_TX_RING]; // TxSwQueue spinlock
-
- RTMP_DMABUF MgmtDescRing; // Shared memory for MGMT descriptors
- RTMP_MGMT_RING MgmtRing;
- NDIS_SPIN_LOCK MgmtRingLock; // Prio Ring spinlock
-
-
-/*****************************************************************************************/
-/* Rx related parameters */
-/*****************************************************************************************/
-
-
-#ifdef RT2870
- RX_CONTEXT RxContext[RX_RING_SIZE]; // 1 for redundant multiple IRP bulk in.
- NDIS_SPIN_LOCK BulkInLock; // BulkIn spinlock for 4 ACs
- UCHAR PendingRx; // The Maxima pending Rx value should be RX_RING_SIZE.
- UCHAR NextRxBulkInIndex; // Indicate the current RxContext Index which hold by Host controller.
- UCHAR NextRxBulkInReadIndex; // Indicate the current RxContext Index which driver can read & process it.
- ULONG NextRxBulkInPosition; // Want to contatenate 2 URB buffer while 1st is bulkin failed URB. This Position is 1st URB TransferLength.
- ULONG TransferBufferLength; // current length of the packet buffer
- ULONG ReadPosition; // current read position in a packet buffer
-#endif // RT2870 //
-
-
-/*****************************************************************************************/
-/* ASIC related parameters */
-/*****************************************************************************************/
- UINT32 MACVersion; // MAC version. Record rt2860C(0x28600100) or rt2860D (0x28600101)..
-
- // ---------------------------
- // E2PROM
- // ---------------------------
- ULONG EepromVersion; // byte 0: version, byte 1: revision, byte 2~3: unused
- UCHAR EEPROMAddressNum; // 93c46=6 93c66=8
- USHORT EEPROMDefaultValue[NUM_EEPROM_BBP_PARMS];
-#ifdef RT30xx
- BOOLEAN EepromAccess;
- UCHAR EFuseTag;
-#endif
- ULONG FirmwareVersion; // byte 0: Minor version, byte 1: Major version, otherwise unused.
-
- // ---------------------------
- // BBP Control
- // ---------------------------
- UCHAR BbpWriteLatch[140]; // record last BBP register value written via BBP_IO_WRITE/BBP_IO_WRITE_VY_REG_ID
- UCHAR BbpRssiToDbmDelta;
- BBP_R66_TUNING BbpTuning;
-
- // ----------------------------
- // RFIC control
- // ----------------------------
- UCHAR RfIcType; // RFIC_xxx
- ULONG RfFreqOffset; // Frequency offset for channel switching
- RTMP_RF_REGS LatchRfRegs; // latch th latest RF programming value since RF IC doesn't support READ
-
- EEPROM_ANTENNA_STRUC Antenna; // Since ANtenna definition is different for a & g. We need to save it for future reference.
- EEPROM_NIC_CONFIG2_STRUC NicConfig2;
-
- // This soft Rx Antenna Diversity mechanism is used only when user set
- // RX Antenna = DIVERSITY ON
- SOFT_RX_ANT_DIVERSITY RxAnt;
-
- UCHAR RFProgSeq;
- CHANNEL_TX_POWER TxPower[MAX_NUM_OF_CHANNELS]; // Store Tx power value for all channels.
- CHANNEL_TX_POWER ChannelList[MAX_NUM_OF_CHANNELS]; // list all supported channels for site survey
- CHANNEL_11J_TX_POWER TxPower11J[MAX_NUM_OF_11JCHANNELS]; // 802.11j channel and bw
- CHANNEL_11J_TX_POWER ChannelList11J[MAX_NUM_OF_11JCHANNELS]; // list all supported channels for site survey
-
- UCHAR ChannelListNum; // number of channel in ChannelList[]
- UCHAR Bbp94;
- BOOLEAN BbpForCCK;
- ULONG Tx20MPwrCfgABand[5];
- ULONG Tx20MPwrCfgGBand[5];
- ULONG Tx40MPwrCfgABand[5];
- ULONG Tx40MPwrCfgGBand[5];
-
- BOOLEAN bAutoTxAgcA; // Enable driver auto Tx Agc control
- UCHAR TssiRefA; // Store Tssi reference value as 25 temperature.
- UCHAR TssiPlusBoundaryA[5]; // Tssi boundary for increase Tx power to compensate.
- UCHAR TssiMinusBoundaryA[5]; // Tssi boundary for decrease Tx power to compensate.
- UCHAR TxAgcStepA; // Store Tx TSSI delta increment / decrement value
- CHAR TxAgcCompensateA; // Store the compensation (TxAgcStep * (idx-1))
-
- BOOLEAN bAutoTxAgcG; // Enable driver auto Tx Agc control
- UCHAR TssiRefG; // Store Tssi reference value as 25 temperature.
- UCHAR TssiPlusBoundaryG[5]; // Tssi boundary for increase Tx power to compensate.
- UCHAR TssiMinusBoundaryG[5]; // Tssi boundary for decrease Tx power to compensate.
- UCHAR TxAgcStepG; // Store Tx TSSI delta increment / decrement value
- CHAR TxAgcCompensateG; // Store the compensation (TxAgcStep * (idx-1))
-
- //+++For RT2870, the parameteres is start from BGRssiOffset1 ~ BGRssiOffset3
- CHAR BGRssiOffset0; // Store B/G RSSI#0 Offset value on EEPROM 0x46h
- CHAR BGRssiOffset1; // Store B/G RSSI#1 Offset value
- CHAR BGRssiOffset2; // Store B/G RSSI#2 Offset value
- //---
-
- //+++For RT2870, the parameteres is start from ARssiOffset1 ~ ARssiOffset3
- CHAR ARssiOffset0; // Store A RSSI#0 Offset value on EEPROM 0x4Ah
- CHAR ARssiOffset1; // Store A RSSI#1 Offset value
- CHAR ARssiOffset2; // Store A RSSI#2 Offset value
- //---
-
- CHAR BLNAGain; // Store B/G external LNA#0 value on EEPROM 0x44h
- CHAR ALNAGain0; // Store A external LNA#0 value for ch36~64
- CHAR ALNAGain1; // Store A external LNA#1 value for ch100~128
- CHAR ALNAGain2; // Store A external LNA#2 value for ch132~165
-
- // ----------------------------
- // LED control
- // ----------------------------
- MCU_LEDCS_STRUC LedCntl;
- USHORT Led1; // read from EEPROM 0x3c
- USHORT Led2; // EEPROM 0x3e
- USHORT Led3; // EEPROM 0x40
- UCHAR LedIndicatorStregth;
- UCHAR RssiSingalstrengthOffet;
- BOOLEAN bLedOnScanning;
- UCHAR LedStatus;
-
-/*****************************************************************************************/
-/* 802.11 related parameters */
-/*****************************************************************************************/
- // outgoing BEACON frame buffer and corresponding TXD
- TXWI_STRUC BeaconTxWI;
- PUCHAR BeaconBuf;
- USHORT BeaconOffset[HW_BEACON_MAX_COUNT];
-
- // pre-build PS-POLL and NULL frame upon link up. for efficiency purpose.
- PSPOLL_FRAME PsPollFrame;
- HEADER_802_11 NullFrame;
-
-#ifdef RT2870
- TX_CONTEXT BeaconContext[BEACON_RING_SIZE];
- TX_CONTEXT NullContext;
- TX_CONTEXT PsPollContext;
- TX_CONTEXT RTSContext;
-#endif // RT2870 //
-
-
-
-//=========AP===========
-
-
-//=======STA===========
-/* Modified by Wu Xi-Kun 4/21/2006 */
- // -----------------------------------------------
- // STA specific configuration & operation status
- // used only when pAd->OpMode == OPMODE_STA
- // -----------------------------------------------
- STA_ADMIN_CONFIG StaCfg; // user desired settings
- STA_ACTIVE_CONFIG StaActive; // valid only when ADHOC_ON(pAd) || INFRA_ON(pAd)
- CHAR nickname[IW_ESSID_MAX_SIZE+1]; // nickname, only used in the iwconfig i/f
- NDIS_MEDIA_STATE PreMediaState;
-
-//=======Common===========
- // OP mode: either AP or STA
- UCHAR OpMode; // OPMODE_STA, OPMODE_AP
-
- NDIS_MEDIA_STATE IndicateMediaState; // Base on Indication state, default is NdisMediaStateDisConnected
-
-
- // configuration: read from Registry & E2PROM
- BOOLEAN bLocalAdminMAC; // Use user changed MAC
- UCHAR PermanentAddress[MAC_ADDR_LEN]; // Factory default MAC address
- UCHAR CurrentAddress[MAC_ADDR_LEN]; // User changed MAC address
-
- // ------------------------------------------------------
- // common configuration to both OPMODE_STA and OPMODE_AP
- // ------------------------------------------------------
- COMMON_CONFIG CommonCfg;
- MLME_STRUCT Mlme;
-
- // AP needs those vaiables for site survey feature.
- MLME_AUX MlmeAux; // temporary settings used during MLME state machine
- BSS_TABLE ScanTab; // store the latest SCAN result
-
- //About MacTab, the sta driver will use #0 and #1 for multicast and AP.
- MAC_TABLE MacTab; // ASIC on-chip WCID entry table. At TX, ASIC always use key according to this on-chip table.
- NDIS_SPIN_LOCK MacTabLock;
-
- BA_TABLE BATable;
-
- NDIS_SPIN_LOCK BATabLock;
- RALINK_TIMER_STRUCT RECBATimer;
-
- // encryption/decryption KEY tables
- CIPHER_KEY SharedKey[MAX_MBSSID_NUM][4]; // STA always use SharedKey[BSS0][0..3]
-
- // RX re-assembly buffer for fragmentation
- FRAGMENT_FRAME FragFrame; // Frame storage for fragment frame
-
- // various Counters
- COUNTER_802_3 Counters8023; // 802.3 counters
- COUNTER_802_11 WlanCounters; // 802.11 MIB counters
- COUNTER_RALINK RalinkCounters; // Ralink propriety counters
- COUNTER_DRS DrsCounters; // counters for Dynamic TX Rate Switching
- PRIVATE_STRUC PrivateInfo; // Private information & counters
-
- // flags, see fRTMP_ADAPTER_xxx flags
- ULONG Flags; // Represent current device status
-
- // current TX sequence #
- USHORT Sequence;
-
- // Control disconnect / connect event generation
- //+++Didn't used anymore
- ULONG LinkDownTime;
- //---
- ULONG LastRxRate;
- ULONG LastTxRate;
- //+++Used only for Station
- BOOLEAN bConfigChanged; // Config Change flag for the same SSID setting
- //---
-
- ULONG ExtraInfo; // Extra information for displaying status
- ULONG SystemErrorBitmap; // b0: E2PROM version error
-
- //+++Didn't used anymore
- ULONG MacIcVersion; // MAC/BBP serial interface issue solved after ver.D
- //---
-
- // ---------------------------
- // System event log
- // ---------------------------
- RT_802_11_EVENT_TABLE EventTab;
-
-
- BOOLEAN HTCEnable;
-
- /*****************************************************************************************/
- /* Statistic related parameters */
- /*****************************************************************************************/
-#ifdef RT2870
- ULONG BulkOutDataOneSecCount;
- ULONG BulkInDataOneSecCount;
- ULONG BulkLastOneSecCount; // BulkOutDataOneSecCount + BulkInDataOneSecCount
- ULONG watchDogRxCnt;
- ULONG watchDogRxOverFlowCnt;
- ULONG watchDogTxPendingCnt[NUM_OF_TX_RING];
-#endif // RT2870 //
-
- BOOLEAN bUpdateBcnCntDone;
- ULONG watchDogMacDeadlock; // prevent MAC/BBP into deadlock condition
- // ----------------------------
- // DEBUG paramerts
- // ----------------------------
- BOOLEAN bBanAllBaSetup;
- BOOLEAN bPromiscuous;
-
- // ----------------------------
- // rt2860c emulation-use Parameters
- // ----------------------------
- ULONG rtsaccu[30];
- ULONG ctsaccu[30];
- ULONG cfendaccu[30];
- ULONG bacontent[16];
- ULONG rxint[RX_RING_SIZE+1];
- UCHAR rcvba[60];
- BOOLEAN bLinkAdapt;
- BOOLEAN bForcePrintTX;
- BOOLEAN bForcePrintRX;
- BOOLEAN bDisablescanning; //defined in RT2870 USB
- BOOLEAN bStaFifoTest;
- BOOLEAN bProtectionTest;
- BOOLEAN bHCCATest;
- BOOLEAN bGenOneHCCA;
- BOOLEAN bBroadComHT;
- //+++Following add from RT2870 USB.
- ULONG BulkOutReq;
- ULONG BulkOutComplete;
- ULONG BulkOutCompleteOther;
- ULONG BulkOutCompleteCancel; // seems not use now?
- ULONG BulkInReq;
- ULONG BulkInComplete;
- ULONG BulkInCompleteFail;
- //---
-
- struct wificonf WIFItestbed;
-
- struct reordering_mpdu_pool mpdu_blk_pool;
-
- ULONG OneSecondnonBEpackets; // record non BE packets per second
-
-#if WIRELESS_EXT >= 12
- struct iw_statistics iw_stats;
-#endif
-
- struct net_device_stats stats;
-
- ULONG TbttTickCount;
-#ifdef PCI_MSI_SUPPORT
- BOOLEAN HaveMsi;
-#endif // PCI_MSI_SUPPORT //
-
-
- UCHAR is_on;
-
-#define TIME_BASE (1000000/OS_HZ)
-#define TIME_ONE_SECOND (1000000/TIME_BASE)
- UCHAR flg_be_adjust;
- ULONG be_adjust_last_time;
-
-
-#ifdef IKANOS_VX_1X0
- struct IKANOS_TX_INFO IkanosTxInfo;
- struct IKANOS_TX_INFO IkanosRxInfo[MAX_MBSSID_NUM + MAX_WDS_ENTRY + MAX_APCLI_NUM + MAX_MESH_NUM];
-#endif // IKANOS_VX_1X0 //
-
-
-#ifdef DBG_DIAGNOSE
- RtmpDiagStruct DiagStruct;
-#endif // DBG_DIAGNOSE //
-
-
- UINT8 PM_FlgSuspend;
-
-#ifdef RT30xx
-//======efuse
- BOOLEAN bUseEfuse;
- BOOLEAN bEEPROMFile;
-#endif // RT30xx //
-
-} RTMP_ADAPTER, *PRTMP_ADAPTER;
-
-//
-// Cisco IAPP format
-//
-typedef struct _CISCO_IAPP_CONTENT_
-{
- USHORT Length; //IAPP Length
- UCHAR MessageType; //IAPP type
- UCHAR FunctionCode; //IAPP function type
- UCHAR DestinaionMAC[MAC_ADDR_LEN];
- UCHAR SourceMAC[MAC_ADDR_LEN];
- USHORT Tag; //Tag(element IE) - Adjacent AP report
- USHORT TagLength; //Length of element not including 4 byte header
- UCHAR OUI[4]; //0x00, 0x40, 0x96, 0x00
- UCHAR PreviousAP[MAC_ADDR_LEN]; //MAC Address of access point
- USHORT Channel;
- USHORT SsidLen;
- UCHAR Ssid[MAX_LEN_OF_SSID];
- USHORT Seconds; //Seconds that the client has been disassociated.
-} CISCO_IAPP_CONTENT, *PCISCO_IAPP_CONTENT;
-
-#define DELAYINTMASK 0x0003fffb
-#define INTMASK 0x0003fffb
-#define IndMask 0x0003fffc
-#define RxINT 0x00000005 // Delayed Rx or indivi rx
-#define TxDataInt 0x000000fa // Delayed Tx or indivi tx
-#define TxMgmtInt 0x00000102 // Delayed Tx or indivi tx
-#define TxCoherent 0x00020000 // tx coherent
-#define RxCoherent 0x00010000 // rx coherent
-#define McuCommand 0x00000200 // mcu
-#define PreTBTTInt 0x00001000 // Pre-TBTT interrupt
-#define TBTTInt 0x00000800 // TBTT interrupt
-#define GPTimeOutInt 0x00008000 // GPtimeout interrupt
-#define AutoWakeupInt 0x00004000 // AutoWakeupInt interrupt
-#define FifoStaFullInt 0x00002000 // fifo statistics full interrupt
-
-
-typedef struct _RX_BLK_
-{
- RT28XX_RXD_STRUC RxD;
- PRXWI_STRUC pRxWI;
- PHEADER_802_11 pHeader;
- PNDIS_PACKET pRxPacket;
- UCHAR *pData;
- USHORT DataSize;
- USHORT Flags;
- UCHAR UserPriority; // for calculate TKIP MIC using
-} RX_BLK;
-
-
-#define RX_BLK_SET_FLAG(_pRxBlk, _flag) (_pRxBlk->Flags |= _flag)
-#define RX_BLK_TEST_FLAG(_pRxBlk, _flag) (_pRxBlk->Flags & _flag)
-#define RX_BLK_CLEAR_FLAG(_pRxBlk, _flag) (_pRxBlk->Flags &= ~(_flag))
-
-
-#define fRX_WDS 0x0001
-#define fRX_AMSDU 0x0002
-#define fRX_ARALINK 0x0004
-#define fRX_HTC 0x0008
-#define fRX_PAD 0x0010
-#define fRX_AMPDU 0x0020
-#define fRX_QOS 0x0040
-#define fRX_INFRA 0x0080
-#define fRX_EAP 0x0100
-#define fRX_MESH 0x0200
-#define fRX_APCLI 0x0400
-#define fRX_DLS 0x0800
-#define fRX_WPI 0x1000
-
-#define LENGTH_AMSDU_SUBFRAMEHEAD 14
-#define LENGTH_ARALINK_SUBFRAMEHEAD 14
-#define LENGTH_ARALINK_HEADER_FIELD 2
-
-#define TX_UNKOWN_FRAME 0x00
-#define TX_MCAST_FRAME 0x01
-#define TX_LEGACY_FRAME 0x02
-#define TX_AMPDU_FRAME 0x04
-#define TX_AMSDU_FRAME 0x08
-#define TX_RALINK_FRAME 0x10
-#define TX_FRAG_FRAME 0x20
-
-
-// Currently the sizeof(TX_BLK) is 148 bytes.
-typedef struct _TX_BLK_
-{
- UCHAR QueIdx;
- UCHAR TxFrameType; // Indicate the Transmission type of the all frames in one batch
- UCHAR TotalFrameNum; // Total frame number want to send-out in one batch
- USHORT TotalFragNum; // Total frame fragments required in one batch
- USHORT TotalFrameLen; // Total length of all frames want to send-out in one batch
-
- QUEUE_HEADER TxPacketList;
- MAC_TABLE_ENTRY *pMacEntry; // NULL: packet with 802.11 RA field is multicast/broadcast address
- HTTRANSMIT_SETTING *pTransmit;
-
- // Following structure used for the characteristics of a specific packet.
- PNDIS_PACKET pPacket;
- PUCHAR pSrcBufHeader; // Reference to the head of sk_buff->data
- PUCHAR pSrcBufData; // Reference to the sk_buff->data, will changed depends on hanlding progresss
- UINT SrcBufLen; // Length of packet payload which not including Layer 2 header
- PUCHAR pExtraLlcSnapEncap; // NULL means no extra LLC/SNAP is required
- UCHAR HeaderBuf[80]; // TempBuffer for TX_INFO + TX_WI + 802.11 Header + padding + AMSDU SubHeader + LLC/SNAP
- UCHAR MpduHeaderLen; // 802.11 header length NOT including the padding
- UCHAR HdrPadLen; // recording Header Padding Length;
- UCHAR apidx; // The interface associated to this packet
- UCHAR Wcid; // The MAC entry associated to this packet
- UCHAR UserPriority; // priority class of packet
- UCHAR FrameGap; // what kind of IFS this packet use
- UCHAR MpduReqNum; // number of fragments of this frame
- UCHAR TxRate; // TODO: Obsoleted? Should change to MCS?
- UCHAR CipherAlg; // cipher alogrithm
- PCIPHER_KEY pKey;
-
-
-
- USHORT Flags; //See following definitions for detail.
-
- //YOU SHOULD NOT TOUCH IT! Following parameters are used for hardware-depended layer.
- ULONG Priv; // Hardware specific value saved in here.
-} TX_BLK, *PTX_BLK;
-
-
-#define fTX_bRtsRequired 0x0001 // Indicate if need send RTS frame for protection. Not used in RT2860/RT2870.
-#define fTX_bAckRequired 0x0002 // the packet need ack response
-#define fTX_bPiggyBack 0x0004 // Legacy device use Piggback or not
-#define fTX_bHTRate 0x0008 // allow to use HT rate
-#define fTX_bForceNonQoS 0x0010 // force to transmit frame without WMM-QoS in HT mode
-#define fTX_bAllowFrag 0x0020 // allow to fragment the packet, A-MPDU, A-MSDU, A-Ralink is not allowed to fragment
-#define fTX_bMoreData 0x0040 // there are more data packets in PowerSave Queue
-#define fTX_bWMM 0x0080 // QOS Data
-
-#define fTX_bClearEAPFrame 0x0100
-
-#define TX_BLK_ASSIGN_FLAG(_pTxBlk, _flag, value) \
- do { \
- if (value) \
- (_pTxBlk->Flags |= _flag) \
- else \
- (_pTxBlk->Flags &= ~(_flag)) \
- }while(0)
-
-#define TX_BLK_SET_FLAG(_pTxBlk, _flag) (_pTxBlk->Flags |= _flag)
-#define TX_BLK_TEST_FLAG(_pTxBlk, _flag) (((_pTxBlk->Flags & _flag) == _flag) ? 1 : 0)
-#define TX_BLK_CLEAR_FLAG(_pTxBlk, _flag) (_pTxBlk->Flags &= ~(_flag))
-
-
-
-
-
-//------------------------------------------------------------------------------------------
-
-static inline VOID ConvertMulticastIP2MAC(
- IN PUCHAR pIpAddr,
- IN PUCHAR *ppMacAddr,
- IN UINT16 ProtoType)
-{
- if (pIpAddr == NULL)
- return;
-
- if (ppMacAddr == NULL || *ppMacAddr == NULL)
- return;
-
- switch (ProtoType)
- {
- case ETH_P_IPV6:
-// memset(*ppMacAddr, 0, ETH_LENGTH_OF_ADDRESS);
- *(*ppMacAddr) = 0x33;
- *(*ppMacAddr + 1) = 0x33;
- *(*ppMacAddr + 2) = pIpAddr[12];
- *(*ppMacAddr + 3) = pIpAddr[13];
- *(*ppMacAddr + 4) = pIpAddr[14];
- *(*ppMacAddr + 5) = pIpAddr[15];
- break;
-
- case ETH_P_IP:
- default:
-// memset(*ppMacAddr, 0, ETH_LENGTH_OF_ADDRESS);
- *(*ppMacAddr) = 0x01;
- *(*ppMacAddr + 1) = 0x00;
- *(*ppMacAddr + 2) = 0x5e;
- *(*ppMacAddr + 3) = pIpAddr[1] & 0x7f;
- *(*ppMacAddr + 4) = pIpAddr[2];
- *(*ppMacAddr + 5) = pIpAddr[3];
- break;
- }
-
- return;
-}
-
-BOOLEAN RTMPCheckForHang(
- IN NDIS_HANDLE MiniportAdapterContext
- );
-
-VOID RTMPHalt(
- IN NDIS_HANDLE MiniportAdapterContext
- );
-
-//
-// Private routines in rtmp_init.c
-//
-NDIS_STATUS RTMPAllocAdapterBlock(
- IN PVOID handle,
- OUT PRTMP_ADAPTER *ppAdapter
- );
-
-NDIS_STATUS RTMPAllocTxRxRingMemory(
- IN PRTMP_ADAPTER pAd
- );
-
-NDIS_STATUS RTMPFindAdapter(
- IN PRTMP_ADAPTER pAd,
- IN NDIS_HANDLE WrapperConfigurationContext
- );
-
-NDIS_STATUS RTMPReadParametersHook(
- IN PRTMP_ADAPTER pAd
- );
-
-VOID RTMPFreeAdapter(
- IN PRTMP_ADAPTER pAd
- );
-
-NDIS_STATUS NICReadRegParameters(
- IN PRTMP_ADAPTER pAd,
- IN NDIS_HANDLE WrapperConfigurationContext
- );
-
-#ifdef RT2870
-VOID NICInitRT30xxRFRegisters(
- IN PRTMP_ADAPTER pAd);
-#endif // RT2870 //
-
-VOID NICReadEEPROMParameters(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR mac_addr);
-
-VOID NICInitAsicFromEEPROM(
- IN PRTMP_ADAPTER pAd);
-
-VOID NICInitTxRxRingAndBacklogQueue(
- IN PRTMP_ADAPTER pAd);
-
-NDIS_STATUS NICInitializeAdapter(
- IN PRTMP_ADAPTER pAd,
- IN BOOLEAN bHardReset);
-
-NDIS_STATUS NICInitializeAsic(
- IN PRTMP_ADAPTER pAd,
- IN BOOLEAN bHardReset);
-
-VOID NICIssueReset(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTMPRingCleanUp(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR RingType);
-
-VOID RxTest(
- IN PRTMP_ADAPTER pAd);
-
-NDIS_STATUS DbgSendPacket(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket);
-
-VOID UserCfgInit(
- IN PRTMP_ADAPTER pAd);
-
-VOID NICResetFromError(
- IN PRTMP_ADAPTER pAd);
-
-VOID NICEraseFirmware(
- IN PRTMP_ADAPTER pAd);
-
-NDIS_STATUS NICLoadFirmware(
- IN PRTMP_ADAPTER pAd);
-
-NDIS_STATUS NICLoadRateSwitchingParams(
- IN PRTMP_ADAPTER pAd);
-
-BOOLEAN NICCheckForHang(
- IN PRTMP_ADAPTER pAd);
-
-VOID NICUpdateFifoStaCounters(
- IN PRTMP_ADAPTER pAd);
-
-VOID NICUpdateRawCounters(
- IN PRTMP_ADAPTER pAd);
-
-ULONG RTMPNotAllZero(
- IN PVOID pSrc1,
- IN ULONG Length);
-
-VOID RTMPZeroMemory(
- IN PVOID pSrc,
- IN ULONG Length);
-
-ULONG RTMPCompareMemory(
- IN PVOID pSrc1,
- IN PVOID pSrc2,
- IN ULONG Length);
-
-VOID RTMPMoveMemory(
- OUT PVOID pDest,
- IN PVOID pSrc,
- IN ULONG Length);
-
-VOID AtoH(
- char *src,
- UCHAR *dest,
- int destlen);
-
-UCHAR BtoH(
- char ch);
-
-VOID RTMPPatchMacBbpBug(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTMPPatchCardBus(
- IN PRTMP_ADAPTER pAdapter);
-
-VOID RTMPPatchRalinkCardBus(
- IN PRTMP_ADAPTER pAdapter,
- IN ULONG Bus);
-
-ULONG RTMPReadCBConfig(
- IN ULONG Bus,
- IN ULONG Slot,
- IN ULONG Func,
- IN ULONG Offset);
-
-VOID RTMPWriteCBConfig(
- IN ULONG Bus,
- IN ULONG Slot,
- IN ULONG Func,
- IN ULONG Offset,
- IN ULONG Value);
-
-VOID RTMPInitTimer(
- IN PRTMP_ADAPTER pAd,
- IN PRALINK_TIMER_STRUCT pTimer,
- IN PVOID pTimerFunc,
- IN PVOID pData,
- IN BOOLEAN Repeat);
-
-VOID RTMPSetTimer(
- IN PRALINK_TIMER_STRUCT pTimer,
- IN ULONG Value);
-
-
-VOID RTMPModTimer(
- IN PRALINK_TIMER_STRUCT pTimer,
- IN ULONG Value);
-
-VOID RTMPCancelTimer(
- IN PRALINK_TIMER_STRUCT pTimer,
- OUT BOOLEAN *pCancelled);
-
-VOID RTMPSetLED(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Status);
-
-VOID RTMPSetSignalLED(
- IN PRTMP_ADAPTER pAd,
- IN NDIS_802_11_RSSI Dbm);
-
-VOID RTMPEnableRxTx(
- IN PRTMP_ADAPTER pAd);
-
-//
-// prototype in action.c
-//
-VOID ActionStateMachineInit(
- IN PRTMP_ADAPTER pAd,
- IN STATE_MACHINE *S,
- OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID MlmeADDBAAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeDELBAAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeDLSAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeInvalidAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeQOSAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerAddBAReqAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerAddBARspAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerDelBAAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerBAAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID SendPSMPAction(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Wcid,
- IN UCHAR Psmp);
-
-VOID PeerRMAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerPublicAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID StaPublicAction(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Bss2040Coexist);
-
-VOID PeerBSSTranAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerHTAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerQOSAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID RECBATimerTimeout(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-VOID ORIBATimerTimeout(
- IN PRTMP_ADAPTER pAd);
-
-VOID SendRefreshBAR(
- IN PRTMP_ADAPTER pAd,
- IN MAC_TABLE_ENTRY *pEntry);
-
-VOID ActHeaderInit(
- IN PRTMP_ADAPTER pAd,
- IN OUT PHEADER_802_11 pHdr80211,
- IN PUCHAR Addr1,
- IN PUCHAR Addr2,
- IN PUCHAR Addr3);
-
-VOID BarHeaderInit(
- IN PRTMP_ADAPTER pAd,
- IN OUT PFRAME_BAR pCntlBar,
- IN PUCHAR pDA,
- IN PUCHAR pSA);
-
-VOID InsertActField(
- IN PRTMP_ADAPTER pAd,
- OUT PUCHAR pFrameBuf,
- OUT PULONG pFrameLen,
- IN UINT8 Category,
- IN UINT8 ActCode);
-
-BOOLEAN QosBADataParse(
- IN PRTMP_ADAPTER pAd,
- IN BOOLEAN bAMSDU,
- IN PUCHAR p8023Header,
- IN UCHAR WCID,
- IN UCHAR TID,
- IN USHORT Sequence,
- IN UCHAR DataOffset,
- IN USHORT Datasize,
- IN UINT CurRxIndex);
-
-BOOLEAN CntlEnqueueForRecv(
- IN PRTMP_ADAPTER pAd,
- IN ULONG Wcid,
- IN ULONG MsgLen,
- IN PFRAME_BA_REQ pMsg);
-
-VOID BaAutoManSwitch(
- IN PRTMP_ADAPTER pAd);
-
-VOID HTIOTCheck(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR BatRecIdx);
-
-//
-// Private routines in rtmp_data.c
-//
-BOOLEAN RTMPHandleRxDoneInterrupt(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTMPHandleTxDoneInterrupt(
- IN PRTMP_ADAPTER pAd);
-
-BOOLEAN RTMPHandleTxRingDmaDoneInterrupt(
- IN PRTMP_ADAPTER pAd,
- IN INT_SOURCE_CSR_STRUC TxRingBitmap);
-
-VOID RTMPHandleMgmtRingDmaDoneInterrupt(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTMPHandleTBTTInterrupt(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTMPHandlePreTBTTInterrupt(
- IN PRTMP_ADAPTER pAd);
-
-void RTMPHandleTwakeupInterrupt(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTMPHandleRxCoherentInterrupt(
- IN PRTMP_ADAPTER pAd);
-
-BOOLEAN TxFrameIsAggregatible(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pPrevAddr1,
- IN PUCHAR p8023hdr);
-
-BOOLEAN PeerIsAggreOn(
- IN PRTMP_ADAPTER pAd,
- IN ULONG TxRate,
- IN PMAC_TABLE_ENTRY pMacEntry);
-
-NDIS_STATUS Sniff2BytesFromNdisBuffer(
- IN PNDIS_BUFFER pFirstBuffer,
- IN UCHAR DesiredOffset,
- OUT PUCHAR pByte0,
- OUT PUCHAR pByte1);
-
-NDIS_STATUS STASendPacket(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket);
-
-VOID STASendPackets(
- IN NDIS_HANDLE MiniportAdapterContext,
- IN PPNDIS_PACKET ppPacketArray,
- IN UINT NumberOfPackets);
-
-VOID RTMPDeQueuePacket(
- IN PRTMP_ADAPTER pAd,
- IN BOOLEAN bIntContext,
- IN UCHAR QueIdx,
- IN UCHAR Max_Tx_Packets);
-
-NDIS_STATUS RTMPHardTransmit(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket,
- IN UCHAR QueIdx,
- OUT PULONG pFreeTXDLeft);
-
-NDIS_STATUS STAHardTransmit(
- IN PRTMP_ADAPTER pAd,
- IN TX_BLK *pTxBlk,
- IN UCHAR QueIdx);
-
-VOID STARxEAPOLFrameIndicate(
- IN PRTMP_ADAPTER pAd,
- IN MAC_TABLE_ENTRY *pEntry,
- IN RX_BLK *pRxBlk,
- IN UCHAR FromWhichBSSID);
-
-NDIS_STATUS RTMPFreeTXDRequest(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR RingType,
- IN UCHAR NumberRequired,
- IN PUCHAR FreeNumberIs);
-
-NDIS_STATUS MlmeHardTransmit(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR QueIdx,
- IN PNDIS_PACKET pPacket);
-
-NDIS_STATUS MlmeHardTransmitMgmtRing(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR QueIdx,
- IN PNDIS_PACKET pPacket);
-
-NDIS_STATUS MlmeHardTransmitTxRing(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR QueIdx,
- IN PNDIS_PACKET pPacket);
-
-USHORT RTMPCalcDuration(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Rate,
- IN ULONG Size);
-
-VOID RTMPWriteTxWI(
- IN PRTMP_ADAPTER pAd,
- IN PTXWI_STRUC pTxWI,
- IN BOOLEAN FRAG,
- IN BOOLEAN CFACK,
- IN BOOLEAN InsTimestamp,
- IN BOOLEAN AMPDU,
- IN BOOLEAN Ack,
- IN BOOLEAN NSeq, // HW new a sequence.
- IN UCHAR BASize,
- IN UCHAR WCID,
- IN ULONG Length,
- IN UCHAR PID,
- IN UCHAR TID,
- IN UCHAR TxRate,
- IN UCHAR Txopmode,
- IN BOOLEAN CfAck,
- IN HTTRANSMIT_SETTING *pTransmit);
-
-
-VOID RTMPWriteTxWI_Data(
- IN PRTMP_ADAPTER pAd,
- IN OUT PTXWI_STRUC pTxWI,
- IN TX_BLK *pTxBlk);
-
-
-VOID RTMPWriteTxWI_Cache(
- IN PRTMP_ADAPTER pAd,
- IN OUT PTXWI_STRUC pTxWI,
- IN TX_BLK *pTxBlk);
-
-VOID RTMPWriteTxDescriptor(
- IN PRTMP_ADAPTER pAd,
- IN PTXD_STRUC pTxD,
- IN BOOLEAN bWIV,
- IN UCHAR QSEL);
-
-VOID RTMPSuspendMsduTransmission(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTMPResumeMsduTransmission(
- IN PRTMP_ADAPTER pAd);
-
-NDIS_STATUS MiniportMMRequest(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR QueIdx,
- IN PUCHAR pData,
- IN UINT Length);
-
-NDIS_STATUS MiniportDataMMRequest(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR QueIdx,
- IN PUCHAR pData,
- IN UINT Length);
-
-VOID RTMPSendNullFrame(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR TxRate,
- IN BOOLEAN bQosNull);
-
-VOID RTMPSendDisassociationFrame(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTMPSendRTSFrame(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pDA,
- IN unsigned int NextMpduSize,
- IN UCHAR TxRate,
- IN UCHAR RTSRate,
- IN USHORT AckDuration,
- IN UCHAR QueIdx,
- IN UCHAR FrameGap);
-
-
-NDIS_STATUS RTMPApplyPacketFilter(
- IN PRTMP_ADAPTER pAd,
- IN PRT28XX_RXD_STRUC pRxD,
- IN PHEADER_802_11 pHeader);
-
-PQUEUE_HEADER RTMPCheckTxSwQueue(
- IN PRTMP_ADAPTER pAd,
- OUT UCHAR *QueIdx);
-
-VOID RTMPReportMicError(
- IN PRTMP_ADAPTER pAd,
- IN PCIPHER_KEY pWpaKey);
-
-VOID WpaMicFailureReportFrame(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID WpaDisassocApAndBlockAssoc(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-NDIS_STATUS RTMPCloneNdisPacket(
- IN PRTMP_ADAPTER pAd,
- IN BOOLEAN pInsAMSDUHdr,
- IN PNDIS_PACKET pInPacket,
- OUT PNDIS_PACKET *ppOutPacket);
-
-NDIS_STATUS RTMPAllocateNdisPacket(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET *pPacket,
- IN PUCHAR pHeader,
- IN UINT HeaderLen,
- IN PUCHAR pData,
- IN UINT DataLen);
-
-VOID RTMPFreeNdisPacket(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket);
-
-BOOLEAN RTMPFreeTXDUponTxDmaDone(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR QueIdx);
-
-BOOLEAN RTMPCheckDHCPFrame(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket);
-
-
-BOOLEAN RTMPCheckEtherType(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket);
-
-
-VOID RTMPCckBbpTuning(
- IN PRTMP_ADAPTER pAd,
- IN UINT TxRate);
-
-//
-// Private routines in rtmp_wep.c
-//
-VOID RTMPInitWepEngine(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pKey,
- IN UCHAR KeyId,
- IN UCHAR KeyLen,
- IN PUCHAR pDest);
-
-VOID RTMPEncryptData(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pSrc,
- IN PUCHAR pDest,
- IN UINT Len);
-
-BOOLEAN RTMPDecryptData(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR pSrc,
- IN UINT Len,
- IN UINT idx);
-
-BOOLEAN RTMPSoftDecryptWEP(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pData,
- IN ULONG DataByteCnt,
- IN PCIPHER_KEY pGroupKey);
-
-VOID RTMPSetICV(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pDest);
-
-VOID ARCFOUR_INIT(
- IN PARCFOURCONTEXT Ctx,
- IN PUCHAR pKey,
- IN UINT KeyLen);
-
-UCHAR ARCFOUR_BYTE(
- IN PARCFOURCONTEXT Ctx);
-
-VOID ARCFOUR_DECRYPT(
- IN PARCFOURCONTEXT Ctx,
- IN PUCHAR pDest,
- IN PUCHAR pSrc,
- IN UINT Len);
-
-VOID ARCFOUR_ENCRYPT(
- IN PARCFOURCONTEXT Ctx,
- IN PUCHAR pDest,
- IN PUCHAR pSrc,
- IN UINT Len);
-
-VOID WPAARCFOUR_ENCRYPT(
- IN PARCFOURCONTEXT Ctx,
- IN PUCHAR pDest,
- IN PUCHAR pSrc,
- IN UINT Len);
-
-UINT RTMP_CALC_FCS32(
- IN UINT Fcs,
- IN PUCHAR Cp,
- IN INT Len);
-
-//
-// MLME routines
-//
-
-// Asic/RF/BBP related functions
-
-VOID AsicAdjustTxPower(
- IN PRTMP_ADAPTER pAd);
-
-VOID AsicUpdateProtect(
- IN PRTMP_ADAPTER pAd,
- IN USHORT OperaionMode,
- IN UCHAR SetMask,
- IN BOOLEAN bDisableBGProtect,
- IN BOOLEAN bNonGFExist);
-
-VOID AsicSwitchChannel(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Channel,
- IN BOOLEAN bScan);
-
-VOID AsicLockChannel(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Channel) ;
-
-VOID AsicAntennaSelect(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Channel);
-
-VOID AsicAntennaSetting(
- IN PRTMP_ADAPTER pAd,
- IN ABGBAND_STATE BandState);
-
-VOID AsicRfTuningExec(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-VOID AsicSleepThenAutoWakeup(
- IN PRTMP_ADAPTER pAd,
- IN USHORT TbttNumToNextWakeUp);
-
-VOID AsicForceSleep(
- IN PRTMP_ADAPTER pAd);
-
-VOID AsicForceWakeup(
- IN PRTMP_ADAPTER pAd,
- IN BOOLEAN bFromTx);
-
-VOID AsicSetBssid(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pBssid);
-
-VOID AsicSetMcastWC(
- IN PRTMP_ADAPTER pAd);
-
-VOID AsicDelWcidTab(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Wcid);
-
-VOID AsicEnableRDG(
- IN PRTMP_ADAPTER pAd);
-
-VOID AsicDisableRDG(
- IN PRTMP_ADAPTER pAd);
-
-VOID AsicDisableSync(
- IN PRTMP_ADAPTER pAd);
-
-VOID AsicEnableBssSync(
- IN PRTMP_ADAPTER pAd);
-
-VOID AsicEnableIbssSync(
- IN PRTMP_ADAPTER pAd);
-
-VOID AsicSetEdcaParm(
- IN PRTMP_ADAPTER pAd,
- IN PEDCA_PARM pEdcaParm);
-
-VOID AsicSetSlotTime(
- IN PRTMP_ADAPTER pAd,
- IN BOOLEAN bUseShortSlotTime);
-
-VOID AsicAddSharedKeyEntry(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR BssIndex,
- IN UCHAR KeyIdx,
- IN UCHAR CipherAlg,
- IN PUCHAR pKey,
- IN PUCHAR pTxMic,
- IN PUCHAR pRxMic);
-
-VOID AsicRemoveSharedKeyEntry(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR BssIndex,
- IN UCHAR KeyIdx);
-
-VOID AsicUpdateWCIDAttribute(
- IN PRTMP_ADAPTER pAd,
- IN USHORT WCID,
- IN UCHAR BssIndex,
- IN UCHAR CipherAlg,
- IN BOOLEAN bUsePairewiseKeyTable);
-
-VOID AsicUpdateWCIDIVEIV(
- IN PRTMP_ADAPTER pAd,
- IN USHORT WCID,
- IN ULONG uIV,
- IN ULONG uEIV);
-
-VOID AsicUpdateRxWCIDTable(
- IN PRTMP_ADAPTER pAd,
- IN USHORT WCID,
- IN PUCHAR pAddr);
-
-VOID AsicAddKeyEntry(
- IN PRTMP_ADAPTER pAd,
- IN USHORT WCID,
- IN UCHAR BssIndex,
- IN UCHAR KeyIdx,
- IN PCIPHER_KEY pCipherKey,
- IN BOOLEAN bUsePairewiseKeyTable,
- IN BOOLEAN bTxKey);
-
-VOID AsicAddPairwiseKeyEntry(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pAddr,
- IN UCHAR WCID,
- IN CIPHER_KEY *pCipherKey);
-
-VOID AsicRemovePairwiseKeyEntry(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR BssIdx,
- IN UCHAR Wcid);
-
-BOOLEAN AsicSendCommandToMcu(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Command,
- IN UCHAR Token,
- IN UCHAR Arg0,
- IN UCHAR Arg1);
-
-
-VOID MacAddrRandomBssid(
- IN PRTMP_ADAPTER pAd,
- OUT PUCHAR pAddr);
-
-VOID MgtMacHeaderInit(
- IN PRTMP_ADAPTER pAd,
- IN OUT PHEADER_802_11 pHdr80211,
- IN UCHAR SubType,
- IN UCHAR ToDs,
- IN PUCHAR pDA,
- IN PUCHAR pBssid);
-
-VOID MlmeRadioOff(
- IN PRTMP_ADAPTER pAd);
-
-VOID MlmeRadioOn(
- IN PRTMP_ADAPTER pAd);
-
-
-VOID BssTableInit(
- IN BSS_TABLE *Tab);
-
-VOID BATableInit(
- IN PRTMP_ADAPTER pAd,
- IN BA_TABLE *Tab);
-
-ULONG BssTableSearch(
- IN BSS_TABLE *Tab,
- IN PUCHAR pBssid,
- IN UCHAR Channel);
-
-ULONG BssSsidTableSearch(
- IN BSS_TABLE *Tab,
- IN PUCHAR pBssid,
- IN PUCHAR pSsid,
- IN UCHAR SsidLen,
- IN UCHAR Channel);
-
-ULONG BssTableSearchWithSSID(
- IN BSS_TABLE *Tab,
- IN PUCHAR Bssid,
- IN PUCHAR pSsid,
- IN UCHAR SsidLen,
- IN UCHAR Channel);
-
-VOID BssTableDeleteEntry(
- IN OUT PBSS_TABLE pTab,
- IN PUCHAR pBssid,
- IN UCHAR Channel);
-
-VOID BATableDeleteORIEntry(
- IN OUT PRTMP_ADAPTER pAd,
- IN BA_ORI_ENTRY *pBAORIEntry);
-
-VOID BATableDeleteRECEntry(
- IN OUT PRTMP_ADAPTER pAd,
- IN BA_REC_ENTRY *pBARECEntry);
-
-VOID BATableTearORIEntry(
- IN OUT PRTMP_ADAPTER pAd,
- IN UCHAR TID,
- IN UCHAR Wcid,
- IN BOOLEAN bForceDelete,
- IN BOOLEAN ALL);
-
-VOID BATableTearRECEntry(
- IN OUT PRTMP_ADAPTER pAd,
- IN UCHAR TID,
- IN UCHAR WCID,
- IN BOOLEAN ALL);
-
-VOID BssEntrySet(
- IN PRTMP_ADAPTER pAd,
- OUT PBSS_ENTRY pBss,
- IN PUCHAR pBssid,
- IN CHAR Ssid[],
- IN UCHAR SsidLen,
- IN UCHAR BssType,
- IN USHORT BeaconPeriod,
- IN PCF_PARM CfParm,
- IN USHORT AtimWin,
- IN USHORT CapabilityInfo,
- IN UCHAR SupRate[],
- IN UCHAR SupRateLen,
- IN UCHAR ExtRate[],
- IN UCHAR ExtRateLen,
- IN HT_CAPABILITY_IE *pHtCapability,
- IN ADD_HT_INFO_IE *pAddHtInfo, // AP might use this additional ht info IE
- IN UCHAR HtCapabilityLen,
- IN UCHAR AddHtInfoLen,
- IN UCHAR NewExtChanOffset,
- IN UCHAR Channel,
- IN CHAR Rssi,
- IN LARGE_INTEGER TimeStamp,
- IN UCHAR CkipFlag,
- IN PEDCA_PARM pEdcaParm,
- IN PQOS_CAPABILITY_PARM pQosCapability,
- IN PQBSS_LOAD_PARM pQbssLoad,
- IN USHORT LengthVIE,
- IN PNDIS_802_11_VARIABLE_IEs pVIE);
-
-ULONG BssTableSetEntry(
- IN PRTMP_ADAPTER pAd,
- OUT PBSS_TABLE pTab,
- IN PUCHAR pBssid,
- IN CHAR Ssid[],
- IN UCHAR SsidLen,
- IN UCHAR BssType,
- IN USHORT BeaconPeriod,
- IN CF_PARM *CfParm,
- IN USHORT AtimWin,
- IN USHORT CapabilityInfo,
- IN UCHAR SupRate[],
- IN UCHAR SupRateLen,
- IN UCHAR ExtRate[],
- IN UCHAR ExtRateLen,
- IN HT_CAPABILITY_IE *pHtCapability,
- IN ADD_HT_INFO_IE *pAddHtInfo, // AP might use this additional ht info IE
- IN UCHAR HtCapabilityLen,
- IN UCHAR AddHtInfoLen,
- IN UCHAR NewExtChanOffset,
- IN UCHAR Channel,
- IN CHAR Rssi,
- IN LARGE_INTEGER TimeStamp,
- IN UCHAR CkipFlag,
- IN PEDCA_PARM pEdcaParm,
- IN PQOS_CAPABILITY_PARM pQosCapability,
- IN PQBSS_LOAD_PARM pQbssLoad,
- IN USHORT LengthVIE,
- IN PNDIS_802_11_VARIABLE_IEs pVIE);
-
-VOID BATableInsertEntry(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Aid,
- IN USHORT TimeOutValue,
- IN USHORT StartingSeq,
- IN UCHAR TID,
- IN UCHAR BAWinSize,
- IN UCHAR OriginatorStatus,
- IN BOOLEAN IsRecipient);
-
-VOID BssTableSsidSort(
- IN PRTMP_ADAPTER pAd,
- OUT BSS_TABLE *OutTab,
- IN CHAR Ssid[],
- IN UCHAR SsidLen);
-
-VOID BssTableSortByRssi(
- IN OUT BSS_TABLE *OutTab);
-
-VOID BssCipherParse(
- IN OUT PBSS_ENTRY pBss);
-
-NDIS_STATUS MlmeQueueInit(
- IN MLME_QUEUE *Queue);
-
-VOID MlmeQueueDestroy(
- IN MLME_QUEUE *Queue);
-
-BOOLEAN MlmeEnqueue(
- IN PRTMP_ADAPTER pAd,
- IN ULONG Machine,
- IN ULONG MsgType,
- IN ULONG MsgLen,
- IN VOID *Msg);
-
-BOOLEAN MlmeEnqueueForRecv(
- IN PRTMP_ADAPTER pAd,
- IN ULONG Wcid,
- IN ULONG TimeStampHigh,
- IN ULONG TimeStampLow,
- IN UCHAR Rssi0,
- IN UCHAR Rssi1,
- IN UCHAR Rssi2,
- IN ULONG MsgLen,
- IN PVOID Msg,
- IN UCHAR Signal);
-
-
-BOOLEAN MlmeDequeue(
- IN MLME_QUEUE *Queue,
- OUT MLME_QUEUE_ELEM **Elem);
-
-VOID MlmeRestartStateMachine(
- IN PRTMP_ADAPTER pAd);
-
-BOOLEAN MlmeQueueEmpty(
- IN MLME_QUEUE *Queue);
-
-BOOLEAN MlmeQueueFull(
- IN MLME_QUEUE *Queue);
-
-BOOLEAN MsgTypeSubst(
- IN PRTMP_ADAPTER pAd,
- IN PFRAME_802_11 pFrame,
- OUT INT *Machine,
- OUT INT *MsgType);
-
-VOID StateMachineInit(
- IN STATE_MACHINE *Sm,
- IN STATE_MACHINE_FUNC Trans[],
- IN ULONG StNr,
- IN ULONG MsgNr,
- IN STATE_MACHINE_FUNC DefFunc,
- IN ULONG InitState,
- IN ULONG Base);
-
-VOID StateMachineSetAction(
- IN STATE_MACHINE *S,
- IN ULONG St,
- ULONG Msg,
- IN STATE_MACHINE_FUNC F);
-
-VOID StateMachinePerformAction(
- IN PRTMP_ADAPTER pAd,
- IN STATE_MACHINE *S,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID Drop(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID AssocStateMachineInit(
- IN PRTMP_ADAPTER pAd,
- IN STATE_MACHINE *Sm,
- OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID ReassocTimeout(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-VOID AssocTimeout(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-VOID DisassocTimeout(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-//----------------------------------------------
-VOID MlmeDisassocReqAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeAssocReqAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeReassocReqAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeDisassocReqAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerAssocRspAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerReassocRspAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerDisassocAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID DisassocTimeoutAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID AssocTimeoutAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID ReassocTimeoutAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID Cls3errAction(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pAddr);
-
-VOID SwitchBetweenWepAndCkip(
- IN PRTMP_ADAPTER pAd);
-
-VOID InvalidStateWhenAssoc(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID InvalidStateWhenReassoc(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID InvalidStateWhenDisassociate(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-#ifdef RT2870
-VOID MlmeCntlConfirm(
- IN PRTMP_ADAPTER pAd,
- IN ULONG MsgType,
- IN USHORT Msg);
-#endif // RT2870 //
-
-VOID ComposePsPoll(
- IN PRTMP_ADAPTER pAd);
-
-VOID ComposeNullFrame(
- IN PRTMP_ADAPTER pAd);
-
-VOID AssocPostProc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pAddr2,
- IN USHORT CapabilityInfo,
- IN USHORT Aid,
- IN UCHAR SupRate[],
- IN UCHAR SupRateLen,
- IN UCHAR ExtRate[],
- IN UCHAR ExtRateLen,
- IN PEDCA_PARM pEdcaParm,
- IN HT_CAPABILITY_IE *pHtCapability,
- IN UCHAR HtCapabilityLen,
- IN ADD_HT_INFO_IE *pAddHtInfo);
-
-VOID AuthStateMachineInit(
- IN PRTMP_ADAPTER pAd,
- IN PSTATE_MACHINE sm,
- OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID AuthTimeout(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-VOID MlmeAuthReqAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerAuthRspAtSeq2Action(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerAuthRspAtSeq4Action(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID AuthTimeoutAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID Cls2errAction(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pAddr);
-
-VOID MlmeDeauthReqAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID InvalidStateWhenAuth(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-//=============================================
-
-VOID AuthRspStateMachineInit(
- IN PRTMP_ADAPTER pAd,
- IN PSTATE_MACHINE Sm,
- IN STATE_MACHINE_FUNC Trans[]);
-
-VOID PeerDeauthAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerAuthSimpleRspGenAndSend(
- IN PRTMP_ADAPTER pAd,
- IN PHEADER_802_11 pHdr80211,
- IN USHORT Alg,
- IN USHORT Seq,
- IN USHORT Reason,
- IN USHORT Status);
-
-//
-// Private routines in dls.c
-//
-
-//========================================
-
-VOID SyncStateMachineInit(
- IN PRTMP_ADAPTER pAd,
- IN STATE_MACHINE *Sm,
- OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID BeaconTimeout(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-VOID ScanTimeout(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-VOID MlmeScanReqAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID InvalidStateWhenScan(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID InvalidStateWhenJoin(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID InvalidStateWhenStart(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerBeacon(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID EnqueueProbeRequest(
- IN PRTMP_ADAPTER pAd);
-
-BOOLEAN ScanRunning(
- IN PRTMP_ADAPTER pAd);
-//=========================================
-
-VOID MlmeCntlInit(
- IN PRTMP_ADAPTER pAd,
- IN STATE_MACHINE *S,
- OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID MlmeCntlMachinePerformAction(
- IN PRTMP_ADAPTER pAd,
- IN STATE_MACHINE *S,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID CntlIdleProc(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID CntlOidScanProc(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID CntlOidSsidProc(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM * Elem);
-
-VOID CntlOidRTBssidProc(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM * Elem);
-
-VOID CntlMlmeRoamingProc(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM * Elem);
-
-VOID CntlWaitDisassocProc(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID CntlWaitJoinProc(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID CntlWaitReassocProc(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID CntlWaitStartProc(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID CntlWaitAuthProc(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID CntlWaitAuthProc2(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID CntlWaitAssocProc(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID LinkUp(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR BssType);
-
-VOID LinkDown(
- IN PRTMP_ADAPTER pAd,
- IN BOOLEAN IsReqFromAP);
-
-VOID IterateOnBssTab(
- IN PRTMP_ADAPTER pAd);
-
-VOID IterateOnBssTab2(
- IN PRTMP_ADAPTER pAd);;
-
-VOID JoinParmFill(
- IN PRTMP_ADAPTER pAd,
- IN OUT MLME_JOIN_REQ_STRUCT *JoinReq,
- IN ULONG BssIdx);
-
-VOID AssocParmFill(
- IN PRTMP_ADAPTER pAd,
- IN OUT MLME_ASSOC_REQ_STRUCT *AssocReq,
- IN PUCHAR pAddr,
- IN USHORT CapabilityInfo,
- IN ULONG Timeout,
- IN USHORT ListenIntv);
-
-VOID ScanParmFill(
- IN PRTMP_ADAPTER pAd,
- IN OUT MLME_SCAN_REQ_STRUCT *ScanReq,
- IN CHAR Ssid[],
- IN UCHAR SsidLen,
- IN UCHAR BssType,
- IN UCHAR ScanType);
-
-VOID DisassocParmFill(
- IN PRTMP_ADAPTER pAd,
- IN OUT MLME_DISASSOC_REQ_STRUCT *DisassocReq,
- IN PUCHAR pAddr,
- IN USHORT Reason);
-
-VOID StartParmFill(
- IN PRTMP_ADAPTER pAd,
- IN OUT MLME_START_REQ_STRUCT *StartReq,
- IN CHAR Ssid[],
- IN UCHAR SsidLen);
-
-VOID AuthParmFill(
- IN PRTMP_ADAPTER pAd,
- IN OUT MLME_AUTH_REQ_STRUCT *AuthReq,
- IN PUCHAR pAddr,
- IN USHORT Alg);
-
-VOID EnqueuePsPoll(
- IN PRTMP_ADAPTER pAd);
-
-VOID EnqueueBeaconFrame(
- IN PRTMP_ADAPTER pAd);
-
-VOID MlmeJoinReqAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeScanReqAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID MlmeStartReqAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID ScanTimeoutAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID BeaconTimeoutAtJoinAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerBeaconAtScanAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerBeaconAtJoinAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerBeacon(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerProbeReqAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID ScanNextChannel(
- IN PRTMP_ADAPTER pAd);
-
-ULONG MakeIbssBeacon(
- IN PRTMP_ADAPTER pAd);
-
-VOID CCXAdjacentAPReport(
- IN PRTMP_ADAPTER pAd);
-
-BOOLEAN MlmeScanReqSanity(
- IN PRTMP_ADAPTER pAd,
- IN VOID *Msg,
- IN ULONG MsgLen,
- OUT UCHAR *BssType,
- OUT CHAR ssid[],
- OUT UCHAR *SsidLen,
- OUT UCHAR *ScanType);
-
-BOOLEAN PeerBeaconAndProbeRspSanity(
- IN PRTMP_ADAPTER pAd,
- IN VOID *Msg,
- IN ULONG MsgLen,
- IN UCHAR MsgChannel,
- OUT PUCHAR pAddr2,
- OUT PUCHAR pBssid,
- OUT CHAR Ssid[],
- OUT UCHAR *pSsidLen,
- OUT UCHAR *pBssType,
- OUT USHORT *pBeaconPeriod,
- OUT UCHAR *pChannel,
- OUT UCHAR *pNewChannel,
- OUT LARGE_INTEGER *pTimestamp,
- OUT CF_PARM *pCfParm,
- OUT USHORT *pAtimWin,
- OUT USHORT *pCapabilityInfo,
- OUT UCHAR *pErp,
- OUT UCHAR *pDtimCount,
- OUT UCHAR *pDtimPeriod,
- OUT UCHAR *pBcastFlag,
- OUT UCHAR *pMessageToMe,
- OUT UCHAR SupRate[],
- OUT UCHAR *pSupRateLen,
- OUT UCHAR ExtRate[],
- OUT UCHAR *pExtRateLen,
- OUT UCHAR *pCkipFlag,
- OUT UCHAR *pAironetCellPowerLimit,
- OUT PEDCA_PARM pEdcaParm,
- OUT PQBSS_LOAD_PARM pQbssLoad,
- OUT PQOS_CAPABILITY_PARM pQosCapability,
- OUT ULONG *pRalinkIe,
- OUT UCHAR *pHtCapabilityLen,
- OUT UCHAR *pPreNHtCapabilityLen,
- OUT HT_CAPABILITY_IE *pHtCapability,
- OUT UCHAR *AddHtInfoLen,
- OUT ADD_HT_INFO_IE *AddHtInfo,
- OUT UCHAR *NewExtChannel,
- OUT USHORT *LengthVIE,
- OUT PNDIS_802_11_VARIABLE_IEs pVIE);
-
-BOOLEAN PeerAddBAReqActionSanity(
- IN PRTMP_ADAPTER pAd,
- IN VOID *pMsg,
- IN ULONG MsgLen,
- OUT PUCHAR pAddr2);
-
-BOOLEAN PeerAddBARspActionSanity(
- IN PRTMP_ADAPTER pAd,
- IN VOID *pMsg,
- IN ULONG MsgLen);
-
-BOOLEAN PeerDelBAActionSanity(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Wcid,
- IN VOID *pMsg,
- IN ULONG MsgLen);
-
-BOOLEAN MlmeAssocReqSanity(
- IN PRTMP_ADAPTER pAd,
- IN VOID *Msg,
- IN ULONG MsgLen,
- OUT PUCHAR pApAddr,
- OUT USHORT *CapabilityInfo,
- OUT ULONG *Timeout,
- OUT USHORT *ListenIntv);
-
-BOOLEAN MlmeAuthReqSanity(
- IN PRTMP_ADAPTER pAd,
- IN VOID *Msg,
- IN ULONG MsgLen,
- OUT PUCHAR pAddr,
- OUT ULONG *Timeout,
- OUT USHORT *Alg);
-
-BOOLEAN MlmeStartReqSanity(
- IN PRTMP_ADAPTER pAd,
- IN VOID *Msg,
- IN ULONG MsgLen,
- OUT CHAR Ssid[],
- OUT UCHAR *Ssidlen);
-
-BOOLEAN PeerAuthSanity(
- IN PRTMP_ADAPTER pAd,
- IN VOID *Msg,
- IN ULONG MsgLen,
- OUT PUCHAR pAddr,
- OUT USHORT *Alg,
- OUT USHORT *Seq,
- OUT USHORT *Status,
- OUT CHAR ChlgText[]);
-
-BOOLEAN PeerAssocRspSanity(
- IN PRTMP_ADAPTER pAd,
- IN VOID *pMsg,
- IN ULONG MsgLen,
- OUT PUCHAR pAddr2,
- OUT USHORT *pCapabilityInfo,
- OUT USHORT *pStatus,
- OUT USHORT *pAid,
- OUT UCHAR SupRate[],
- OUT UCHAR *pSupRateLen,
- OUT UCHAR ExtRate[],
- OUT UCHAR *pExtRateLen,
- OUT HT_CAPABILITY_IE *pHtCapability,
- OUT ADD_HT_INFO_IE *pAddHtInfo, // AP might use this additional ht info IE
- OUT UCHAR *pHtCapabilityLen,
- OUT UCHAR *pAddHtInfoLen,
- OUT UCHAR *pNewExtChannelOffset,
- OUT PEDCA_PARM pEdcaParm,
- OUT UCHAR *pCkipFlag);
-
-BOOLEAN PeerDisassocSanity(
- IN PRTMP_ADAPTER pAd,
- IN VOID *Msg,
- IN ULONG MsgLen,
- OUT PUCHAR pAddr2,
- OUT USHORT *Reason);
-
-BOOLEAN PeerWpaMessageSanity(
- IN PRTMP_ADAPTER pAd,
- IN PEAPOL_PACKET pMsg,
- IN ULONG MsgLen,
- IN UCHAR MsgType,
- IN MAC_TABLE_ENTRY *pEntry);
-
-BOOLEAN PeerDeauthSanity(
- IN PRTMP_ADAPTER pAd,
- IN VOID *Msg,
- IN ULONG MsgLen,
- OUT PUCHAR pAddr2,
- OUT USHORT *Reason);
-
-BOOLEAN PeerProbeReqSanity(
- IN PRTMP_ADAPTER pAd,
- IN VOID *Msg,
- IN ULONG MsgLen,
- OUT PUCHAR pAddr2,
- OUT CHAR Ssid[],
- OUT UCHAR *pSsidLen);
-
-BOOLEAN GetTimBit(
- IN CHAR *Ptr,
- IN USHORT Aid,
- OUT UCHAR *TimLen,
- OUT UCHAR *BcastFlag,
- OUT UCHAR *DtimCount,
- OUT UCHAR *DtimPeriod,
- OUT UCHAR *MessageToMe);
-
-UCHAR ChannelSanity(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR channel);
-
-NDIS_802_11_NETWORK_TYPE NetworkTypeInUseSanity(
- IN PBSS_ENTRY pBss);
-
-BOOLEAN MlmeDelBAReqSanity(
- IN PRTMP_ADAPTER pAd,
- IN VOID *Msg,
- IN ULONG MsgLen);
-
-BOOLEAN MlmeAddBAReqSanity(
- IN PRTMP_ADAPTER pAd,
- IN VOID *Msg,
- IN ULONG MsgLen,
- OUT PUCHAR pAddr2);
-
-ULONG MakeOutgoingFrame(
- OUT CHAR *Buffer,
- OUT ULONG *Length, ...);
-
-VOID LfsrInit(
- IN PRTMP_ADAPTER pAd,
- IN ULONG Seed);
-
-UCHAR RandomByte(
- IN PRTMP_ADAPTER pAd);
-
-VOID AsicUpdateAutoFallBackTable(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pTxRate);
-
-VOID MlmePeriodicExec(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-VOID LinkDownExec(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-VOID LinkUpExec(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-VOID STAMlmePeriodicExec(
- PRTMP_ADAPTER pAd);
-
-VOID MlmeAutoScan(
- IN PRTMP_ADAPTER pAd);
-
-VOID MlmeAutoReconnectLastSSID(
- IN PRTMP_ADAPTER pAd);
-
-BOOLEAN MlmeValidateSSID(
- IN PUCHAR pSsid,
- IN UCHAR SsidLen);
-
-VOID MlmeCheckForRoaming(
- IN PRTMP_ADAPTER pAd,
- IN ULONG Now32);
-
-VOID MlmeCheckForFastRoaming(
- IN PRTMP_ADAPTER pAd,
- IN ULONG Now);
-
-VOID MlmeDynamicTxRateSwitching(
- IN PRTMP_ADAPTER pAd);
-
-VOID MlmeSetTxRate(
- IN PRTMP_ADAPTER pAd,
- IN PMAC_TABLE_ENTRY pEntry,
- IN PRTMP_TX_RATE_SWITCH pTxRate);
-
-VOID MlmeSelectTxRateTable(
- IN PRTMP_ADAPTER pAd,
- IN PMAC_TABLE_ENTRY pEntry,
- IN PUCHAR *ppTable,
- IN PUCHAR pTableSize,
- IN PUCHAR pInitTxRateIdx);
-
-VOID MlmeCalculateChannelQuality(
- IN PRTMP_ADAPTER pAd,
- IN ULONG Now);
-
-VOID MlmeCheckPsmChange(
- IN PRTMP_ADAPTER pAd,
- IN ULONG Now32);
-
-VOID MlmeSetPsmBit(
- IN PRTMP_ADAPTER pAd,
- IN USHORT psm);
-
-VOID MlmeSetTxPreamble(
- IN PRTMP_ADAPTER pAd,
- IN USHORT TxPreamble);
-
-VOID UpdateBasicRateBitmap(
- IN PRTMP_ADAPTER pAd);
-
-VOID MlmeUpdateTxRates(
- IN PRTMP_ADAPTER pAd,
- IN BOOLEAN bLinkUp,
- IN UCHAR apidx);
-
-VOID MlmeUpdateHtTxRates(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR apidx);
-
-VOID RTMPCheckRates(
- IN PRTMP_ADAPTER pAd,
- IN OUT UCHAR SupRate[],
- IN OUT UCHAR *SupRateLen);
-
-BOOLEAN RTMPCheckChannel(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR CentralChannel,
- IN UCHAR Channel);
-
-BOOLEAN RTMPCheckHt(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Wcid,
- IN OUT HT_CAPABILITY_IE *pHtCapability,
- IN OUT ADD_HT_INFO_IE *pAddHtInfo);
-
-VOID StaQuickResponeForRateUpExec(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-VOID AsicBbpTuning1(
- IN PRTMP_ADAPTER pAd);
-
-VOID AsicBbpTuning2(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTMPUpdateMlmeRate(
- IN PRTMP_ADAPTER pAd);
-
-CHAR RTMPMaxRssi(
- IN PRTMP_ADAPTER pAd,
- IN CHAR Rssi0,
- IN CHAR Rssi1,
- IN CHAR Rssi2);
-
-#ifdef RT30xx
-VOID AsicSetRxAnt(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Ant);
-#endif
-
-VOID AsicEvaluateRxAnt(
- IN PRTMP_ADAPTER pAd);
-
-VOID AsicRxAntEvalTimeout(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-VOID APSDPeriodicExec(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-BOOLEAN RTMPCheckEntryEnableAutoRateSwitch(
- IN PRTMP_ADAPTER pAd,
- IN PMAC_TABLE_ENTRY pEntry);
-
-UCHAR RTMPStaFixedTxMode(
- IN PRTMP_ADAPTER pAd,
- IN PMAC_TABLE_ENTRY pEntry);
-
-VOID RTMPUpdateLegacyTxSetting(
- UCHAR fixed_tx_mode,
- PMAC_TABLE_ENTRY pEntry);
-
-BOOLEAN RTMPAutoRateSwitchCheck(
- IN PRTMP_ADAPTER pAd);
-
-NDIS_STATUS MlmeInit(
- IN PRTMP_ADAPTER pAd);
-
-VOID MlmeHandler(
- IN PRTMP_ADAPTER pAd);
-
-VOID MlmeHalt(
- IN PRTMP_ADAPTER pAd);
-
-VOID MlmeResetRalinkCounters(
- IN PRTMP_ADAPTER pAd);
-
-VOID BuildChannelList(
- IN PRTMP_ADAPTER pAd);
-
-UCHAR FirstChannel(
- IN PRTMP_ADAPTER pAd);
-
-UCHAR NextChannel(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR channel);
-
-VOID ChangeToCellPowerLimit(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR AironetCellPowerLimit);
-
-VOID RaiseClock(
- IN PRTMP_ADAPTER pAd,
- IN UINT32 *x);
-
-VOID LowerClock(
- IN PRTMP_ADAPTER pAd,
- IN UINT32 *x);
-
-USHORT ShiftInBits(
- IN PRTMP_ADAPTER pAd);
-
-VOID ShiftOutBits(
- IN PRTMP_ADAPTER pAd,
- IN USHORT data,
- IN USHORT count);
-
-VOID EEpromCleanup(
- IN PRTMP_ADAPTER pAd);
-
-VOID EWDS(
- IN PRTMP_ADAPTER pAd);
-
-VOID EWEN(
- IN PRTMP_ADAPTER pAd);
-
-USHORT RTMP_EEPROM_READ16(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset);
-
-VOID RTMP_EEPROM_WRITE16(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN USHORT Data);
-
-//
-// Prototypes of function definition in rtmp_tkip.c
-//
-VOID RTMPInitTkipEngine(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pTKey,
- IN UCHAR KeyId,
- IN PUCHAR pTA,
- IN PUCHAR pMICKey,
- IN PUCHAR pTSC,
- OUT PULONG pIV16,
- OUT PULONG pIV32);
-
-VOID RTMPInitMICEngine(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pKey,
- IN PUCHAR pDA,
- IN PUCHAR pSA,
- IN UCHAR UserPriority,
- IN PUCHAR pMICKey);
-
-BOOLEAN RTMPTkipCompareMICValue(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pSrc,
- IN PUCHAR pDA,
- IN PUCHAR pSA,
- IN PUCHAR pMICKey,
- IN UCHAR UserPriority,
- IN UINT Len);
-
-VOID RTMPCalculateMICValue(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket,
- IN PUCHAR pEncap,
- IN PCIPHER_KEY pKey,
- IN UCHAR apidx);
-
-BOOLEAN RTMPTkipCompareMICValueWithLLC(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pLLC,
- IN PUCHAR pSrc,
- IN PUCHAR pDA,
- IN PUCHAR pSA,
- IN PUCHAR pMICKey,
- IN UINT Len);
-
-VOID RTMPTkipAppendByte(
- IN PTKIP_KEY_INFO pTkip,
- IN UCHAR uChar);
-
-VOID RTMPTkipAppend(
- IN PTKIP_KEY_INFO pTkip,
- IN PUCHAR pSrc,
- IN UINT nBytes);
-
-VOID RTMPTkipGetMIC(
- IN PTKIP_KEY_INFO pTkip);
-
-BOOLEAN RTMPSoftDecryptTKIP(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pData,
- IN ULONG DataByteCnt,
- IN UCHAR UserPriority,
- IN PCIPHER_KEY pWpaKey);
-
-BOOLEAN RTMPSoftDecryptAES(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pData,
- IN ULONG DataByteCnt,
- IN PCIPHER_KEY pWpaKey);
-
-//
-// Prototypes of function definition in cmm_info.c
-//
-NDIS_STATUS RTMPWPARemoveKeyProc(
- IN PRTMP_ADAPTER pAd,
- IN PVOID pBuf);
-
-VOID RTMPWPARemoveAllKeys(
- IN PRTMP_ADAPTER pAd);
-
-BOOLEAN RTMPCheckStrPrintAble(
- IN CHAR *pInPutStr,
- IN UCHAR strLen);
-
-VOID RTMPSetPhyMode(
- IN PRTMP_ADAPTER pAd,
- IN ULONG phymode);
-
-VOID RTMPUpdateHTIE(
- IN RT_HT_CAPABILITY *pRtHt,
- IN UCHAR *pMcsSet,
- OUT HT_CAPABILITY_IE *pHtCapability,
- OUT ADD_HT_INFO_IE *pAddHtInfo);
-
-VOID RTMPAddWcidAttributeEntry(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR BssIdx,
- IN UCHAR KeyIdx,
- IN UCHAR CipherAlg,
- IN MAC_TABLE_ENTRY *pEntry);
-
-CHAR *GetEncryptType(
- CHAR enc);
-
-CHAR *GetAuthMode(
- CHAR auth);
-
-VOID RTMPIoctlGetSiteSurvey(
- IN PRTMP_ADAPTER pAdapter,
- IN struct iwreq *wrq);
-
-VOID RTMPIoctlGetMacTable(
- IN PRTMP_ADAPTER pAd,
- IN struct iwreq *wrq);
-
-VOID RTMPIndicateWPA2Status(
- IN PRTMP_ADAPTER pAdapter);
-
-VOID RTMPOPModeSwitching(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTMPAddBSSIDCipher(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Aid,
- IN PNDIS_802_11_KEY pKey,
- IN UCHAR CipherAlg);
-
-VOID RTMPSetHT(
- IN PRTMP_ADAPTER pAd,
- IN OID_SET_HT_PHYMODE *pHTPhyMode);
-
-VOID RTMPSetIndividualHT(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR apidx);
-
-VOID RTMPSendWirelessEvent(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Event_flag,
- IN PUCHAR pAddr,
- IN UCHAR BssIdx,
- IN CHAR Rssi);
-
-VOID NICUpdateCntlCounters(
- IN PRTMP_ADAPTER pAd,
- IN PHEADER_802_11 pHeader,
- IN UCHAR SubType,
- IN PRXWI_STRUC pRxWI);
-//
-// prototype in wpa.c
-//
-BOOLEAN WpaMsgTypeSubst(
- IN UCHAR EAPType,
- OUT INT *MsgType);
-
-VOID WpaPskStateMachineInit(
- IN PRTMP_ADAPTER pAd,
- IN STATE_MACHINE *S,
- OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID WpaEAPOLKeyAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID WpaPairMsg1Action(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID WpaPairMsg3Action(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID WpaGroupMsg1Action(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID WpaMacHeaderInit(
- IN PRTMP_ADAPTER pAd,
- IN OUT PHEADER_802_11 pHdr80211,
- IN UCHAR wep,
- IN PUCHAR pAddr1);
-
-VOID Wpa2PairMsg1Action(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID Wpa2PairMsg3Action(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-BOOLEAN ParseKeyData(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pKeyData,
- IN UCHAR KeyDataLen,
- IN UCHAR bPairewise);
-
-VOID RTMPToWirelessSta(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pHeader802_3,
- IN UINT HdrLen,
- IN PUCHAR pData,
- IN UINT DataLen,
- IN BOOLEAN is4wayFrame);
-
-VOID HMAC_SHA1(
- IN UCHAR *text,
- IN UINT text_len,
- IN UCHAR *key,
- IN UINT key_len,
- IN UCHAR *digest);
-
-VOID PRF(
- IN UCHAR *key,
- IN INT key_len,
- IN UCHAR *prefix,
- IN INT prefix_len,
- IN UCHAR *data,
- IN INT data_len,
- OUT UCHAR *output,
- IN INT len);
-
-VOID CCKMPRF(
- IN UCHAR *key,
- IN INT key_len,
- IN UCHAR *data,
- IN INT data_len,
- OUT UCHAR *output,
- IN INT len);
-
-VOID WpaCountPTK(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR *PMK,
- IN UCHAR *ANonce,
- IN UCHAR *AA,
- IN UCHAR *SNonce,
- IN UCHAR *SA,
- OUT UCHAR *output,
- IN UINT len);
-
-VOID GenRandom(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR *macAddr,
- OUT UCHAR *random);
-
-//
-// prototype in aironet.c
-//
-VOID AironetStateMachineInit(
- IN PRTMP_ADAPTER pAd,
- IN STATE_MACHINE *S,
- OUT STATE_MACHINE_FUNC Trans[]);
-
-VOID AironetMsgAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID AironetRequestAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID ChannelLoadRequestAction(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Index);
-
-VOID NoiseHistRequestAction(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Index);
-
-VOID BeaconRequestAction(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Index);
-
-VOID AironetReportAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID ChannelLoadReportAction(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Index);
-
-VOID NoiseHistReportAction(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Index);
-
-VOID AironetFinalReportAction(
- IN PRTMP_ADAPTER pAd);
-
-VOID BeaconReportAction(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Index);
-
-VOID AironetAddBeaconReport(
- IN PRTMP_ADAPTER pAd,
- IN ULONG Index,
- IN PMLME_QUEUE_ELEM pElem);
-
-VOID AironetCreateBeaconReportFromBssTable(
- IN PRTMP_ADAPTER pAd);
-
-VOID DBGPRINT_TX_RING(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR QueIdx);
-
-VOID DBGPRINT_RX_RING(
- IN PRTMP_ADAPTER pAd);
-
-CHAR ConvertToRssi(
- IN PRTMP_ADAPTER pAd,
- IN CHAR Rssi,
- IN UCHAR RssiNumber);
-
-VOID APAsicEvaluateRxAnt(
- IN PRTMP_ADAPTER pAd);
-
-
-VOID APAsicRxAntEvalTimeout(
- IN PRTMP_ADAPTER pAd);
-
-//
-// function prototype in cmm_wpa.c
-//
-BOOLEAN RTMPCheckWPAframe(
- IN PRTMP_ADAPTER pAd,
- IN PMAC_TABLE_ENTRY pEntry,
- IN PUCHAR pData,
- IN ULONG DataByteCount,
- IN UCHAR FromWhichBSSID);
-
-VOID AES_GTK_KEY_UNWRAP(
- IN UCHAR *key,
- OUT UCHAR *plaintext,
- IN UCHAR c_len,
- IN UCHAR *ciphertext);
-
-BOOLEAN RTMPCheckRSNIE(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pData,
- IN UCHAR DataLen,
- IN MAC_TABLE_ENTRY *pEntry,
- OUT UCHAR *Offset);
-
-BOOLEAN RTMPParseEapolKeyData(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pKeyData,
- IN UCHAR KeyDataLen,
- IN UCHAR GroupKeyIndex,
- IN UCHAR MsgType,
- IN BOOLEAN bWPA2,
- IN MAC_TABLE_ENTRY *pEntry);
-
-VOID ConstructEapolMsg(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR PeerAuthMode,
- IN UCHAR PeerWepStatus,
- IN UCHAR MyGroupKeyWepStatus,
- IN UCHAR MsgType,
- IN UCHAR DefaultKeyIdx,
- IN UCHAR *ReplayCounter,
- IN UCHAR *KeyNonce,
- IN UCHAR *TxRSC,
- IN UCHAR *PTK,
- IN UCHAR *GTK,
- IN UCHAR *RSNIE,
- IN UCHAR RSNIE_Len,
- OUT PEAPOL_PACKET pMsg);
-
-VOID CalculateMIC(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR PeerWepStatus,
- IN UCHAR *PTK,
- OUT PEAPOL_PACKET pMsg);
-
-NDIS_STATUS RTMPSoftDecryptBroadCastData(
- IN PRTMP_ADAPTER pAd,
- IN RX_BLK *pRxBlk,
- IN NDIS_802_11_ENCRYPTION_STATUS GroupCipher,
- IN PCIPHER_KEY pShard_key);
-
-VOID ConstructEapolKeyData(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR PeerAuthMode,
- IN UCHAR PeerWepStatus,
- IN UCHAR GroupKeyWepStatus,
- IN UCHAR MsgType,
- IN UCHAR DefaultKeyIdx,
- IN BOOLEAN bWPA2Capable,
- IN UCHAR *PTK,
- IN UCHAR *GTK,
- IN UCHAR *RSNIE,
- IN UCHAR RSNIE_LEN,
- OUT PEAPOL_PACKET pMsg);
-
-VOID RTMPMakeRSNIE(
- IN PRTMP_ADAPTER pAd,
- IN UINT AuthMode,
- IN UINT WepStatus,
- IN UCHAR apidx);
-
-//
-// function prototype in ap_wpa.c
-//
-
-BOOLEAN APWpaMsgTypeSubst(
- IN UCHAR EAPType,
- OUT INT *MsgType) ;
-
-MAC_TABLE_ENTRY *PACInquiry(
- IN PRTMP_ADAPTER pAd,
- IN ULONG Wcid);
-
-BOOLEAN RTMPCheckMcast(
- IN PRTMP_ADAPTER pAd,
- IN PEID_STRUCT eid_ptr,
- IN MAC_TABLE_ENTRY *pEntry);
-
-BOOLEAN RTMPCheckUcast(
- IN PRTMP_ADAPTER pAd,
- IN PEID_STRUCT eid_ptr,
- IN MAC_TABLE_ENTRY *pEntry);
-
-BOOLEAN RTMPCheckAUTH(
- IN PRTMP_ADAPTER pAd,
- IN PEID_STRUCT eid_ptr,
- IN MAC_TABLE_ENTRY *pEntry);
-
-VOID WPAStart4WayHS(
- IN PRTMP_ADAPTER pAd,
- IN MAC_TABLE_ENTRY *pEntry,
- IN ULONG TimeInterval);
-
-VOID WPAStart2WayGroupHS(
- IN PRTMP_ADAPTER pAd,
- IN MAC_TABLE_ENTRY *pEntry);
-
-VOID APWpaEAPPacketAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID APWpaEAPOLStartAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID APWpaEAPOLLogoffAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID APWpaEAPOLKeyAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID APWpaEAPOLASFAlertAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID HandleCounterMeasure(
- IN PRTMP_ADAPTER pAd,
- IN MAC_TABLE_ENTRY *pEntry);
-
-VOID PeerPairMsg2Action(
- IN PRTMP_ADAPTER pAd,
- IN MAC_TABLE_ENTRY *pEntry,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerPairMsg4Action(
- IN PRTMP_ADAPTER pAd,
- IN MAC_TABLE_ENTRY *pEntry,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID CMTimerExec(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-VOID WPARetryExec(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-VOID EnqueueStartForPSKExec(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-VOID RTMPHandleSTAKey(
- IN PRTMP_ADAPTER pAdapter,
- IN MAC_TABLE_ENTRY *pEntry,
- IN MLME_QUEUE_ELEM *Elem);
-
-VOID PeerGroupMsg2Action(
- IN PRTMP_ADAPTER pAd,
- IN PMAC_TABLE_ENTRY pEntry,
- IN VOID *Msg,
- IN UINT MsgLen);
-
-VOID PairDisAssocAction(
- IN PRTMP_ADAPTER pAd,
- IN PMAC_TABLE_ENTRY pEntry,
- IN USHORT Reason);
-
-VOID MlmeDeAuthAction(
- IN PRTMP_ADAPTER pAd,
- IN PMAC_TABLE_ENTRY pEntry,
- IN USHORT Reason);
-
-VOID GREKEYPeriodicExec(
- IN PVOID SystemSpecific1,
- IN PVOID FunctionContext,
- IN PVOID SystemSpecific2,
- IN PVOID SystemSpecific3);
-
-VOID CountGTK(
- IN UCHAR *PMK,
- IN UCHAR *GNonce,
- IN UCHAR *AA,
- OUT UCHAR *output,
- IN UINT len);
-
-VOID GetSmall(
- IN PVOID pSrc1,
- IN PVOID pSrc2,
- OUT PUCHAR out,
- IN ULONG Length);
-
-VOID GetLarge(
- IN PVOID pSrc1,
- IN PVOID pSrc2,
- OUT PUCHAR out,
- IN ULONG Length);
-
-VOID APGenRandom(
- IN PRTMP_ADAPTER pAd,
- OUT UCHAR *random);
-
-VOID AES_GTK_KEY_WRAP(
- IN UCHAR *key,
- IN UCHAR *plaintext,
- IN UCHAR p_len,
- OUT UCHAR *ciphertext);
-
-VOID WpaSend(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR pPacket,
- IN ULONG Len);
-
-VOID APToWirelessSta(
- IN PRTMP_ADAPTER pAd,
- IN MAC_TABLE_ENTRY *pEntry,
- IN PUCHAR pHeader802_3,
- IN UINT HdrLen,
- IN PUCHAR pData,
- IN UINT DataLen,
- IN BOOLEAN bClearFrame);
-
-VOID RTMPAddPMKIDCache(
- IN PRTMP_ADAPTER pAd,
- IN INT apidx,
- IN PUCHAR pAddr,
- IN UCHAR *PMKID,
- IN UCHAR *PMK);
-
-INT RTMPSearchPMKIDCache(
- IN PRTMP_ADAPTER pAd,
- IN INT apidx,
- IN PUCHAR pAddr);
-
-VOID RTMPDeletePMKIDCache(
- IN PRTMP_ADAPTER pAd,
- IN INT apidx,
- IN INT idx);
-
-VOID RTMPMaintainPMKIDCache(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTMPSendTriggerFrame(
- IN PRTMP_ADAPTER pAd,
- IN PVOID pBuffer,
- IN ULONG Length,
- IN UCHAR TxRate,
- IN BOOLEAN bQosNull);
-
-#ifdef RT30xx
-VOID RTMPFilterCalibration(
- IN PRTMP_ADAPTER pAd);
-#endif // RT30xx //
-
-/* timeout -- ms */
-VOID RTMP_SetPeriodicTimer(
- IN NDIS_MINIPORT_TIMER *pTimer,
- IN unsigned long timeout);
-
-VOID RTMP_OS_Init_Timer(
- IN PRTMP_ADAPTER pAd,
- IN NDIS_MINIPORT_TIMER *pTimer,
- IN TIMER_FUNCTION function,
- IN PVOID data);
-
-VOID RTMP_OS_Add_Timer(
- IN NDIS_MINIPORT_TIMER *pTimer,
- IN unsigned long timeout);
-
-VOID RTMP_OS_Mod_Timer(
- IN NDIS_MINIPORT_TIMER *pTimer,
- IN unsigned long timeout);
-
-
-VOID RTMP_OS_Del_Timer(
- IN NDIS_MINIPORT_TIMER *pTimer,
- OUT BOOLEAN *pCancelled);
-
-
-VOID RTMP_OS_Release_Packet(
- IN PRTMP_ADAPTER pAd,
- IN PQUEUE_ENTRY pEntry);
-
-VOID RTMPusecDelay(
- IN ULONG usec);
-
-NDIS_STATUS os_alloc_mem(
- IN PRTMP_ADAPTER pAd,
- OUT PUCHAR *mem,
- IN ULONG size);
-
-NDIS_STATUS os_free_mem(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR mem);
-
-
-void RTMP_AllocateSharedMemory(
- IN PRTMP_ADAPTER pAd,
- IN ULONG Length,
- IN BOOLEAN Cached,
- OUT PVOID *VirtualAddress,
- OUT PNDIS_PHYSICAL_ADDRESS PhysicalAddress);
-
-VOID RTMPFreeTxRxRingMemory(
- IN PRTMP_ADAPTER pAd);
-
-NDIS_STATUS AdapterBlockAllocateMemory(
- IN PVOID handle,
- OUT PVOID *ppAd);
-
-void RTMP_AllocateTxDescMemory(
- IN PRTMP_ADAPTER pAd,
- IN UINT Index,
- IN ULONG Length,
- IN BOOLEAN Cached,
- OUT PVOID *VirtualAddress,
- OUT PNDIS_PHYSICAL_ADDRESS PhysicalAddress);
-
-void RTMP_AllocateFirstTxBuffer(
- IN PRTMP_ADAPTER pAd,
- IN UINT Index,
- IN ULONG Length,
- IN BOOLEAN Cached,
- OUT PVOID *VirtualAddress,
- OUT PNDIS_PHYSICAL_ADDRESS PhysicalAddress);
-
-void RTMP_AllocateMgmtDescMemory(
- IN PRTMP_ADAPTER pAd,
- IN ULONG Length,
- IN BOOLEAN Cached,
- OUT PVOID *VirtualAddress,
- OUT PNDIS_PHYSICAL_ADDRESS PhysicalAddress);
-
-void RTMP_AllocateRxDescMemory(
- IN PRTMP_ADAPTER pAd,
- IN ULONG Length,
- IN BOOLEAN Cached,
- OUT PVOID *VirtualAddress,
- OUT PNDIS_PHYSICAL_ADDRESS PhysicalAddress);
-
-PNDIS_PACKET RTMP_AllocateRxPacketBuffer(
- IN PRTMP_ADAPTER pAd,
- IN ULONG Length,
- IN BOOLEAN Cached,
- OUT PVOID *VirtualAddress,
- OUT PNDIS_PHYSICAL_ADDRESS PhysicalAddress);
-
-PNDIS_PACKET RTMP_AllocateTxPacketBuffer(
- IN PRTMP_ADAPTER pAd,
- IN ULONG Length,
- IN BOOLEAN Cached,
- OUT PVOID *VirtualAddress);
-
-PNDIS_PACKET RTMP_AllocateFragPacketBuffer(
- IN PRTMP_ADAPTER pAd,
- IN ULONG Length);
-
-void RTMP_QueryPacketInfo(
- IN PNDIS_PACKET pPacket,
- OUT PACKET_INFO *pPacketInfo,
- OUT PUCHAR *pSrcBufVA,
- OUT UINT *pSrcBufLen);
-
-void RTMP_QueryNextPacketInfo(
- IN PNDIS_PACKET *ppPacket,
- OUT PACKET_INFO *pPacketInfo,
- OUT PUCHAR *pSrcBufVA,
- OUT UINT *pSrcBufLen);
-
-
-BOOLEAN RTMP_FillTxBlkInfo(
- IN RTMP_ADAPTER *pAd,
- IN TX_BLK *pTxBlk);
-
-
-PRTMP_SCATTER_GATHER_LIST
-rt_get_sg_list_from_packet(PNDIS_PACKET pPacket, RTMP_SCATTER_GATHER_LIST *sg);
-
-
- void announce_802_3_packet(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket);
-
-
-UINT BA_Reorder_AMSDU_Annnounce(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket);
-
-
-UINT Handle_AMSDU_Packet(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pData,
- IN ULONG DataSize,
- IN UCHAR FromWhichBSSID);
-
-
-void convert_802_11_to_802_3_packet(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket,
- IN PUCHAR p8023hdr,
- IN PUCHAR pData,
- IN ULONG DataSize,
- IN UCHAR FromWhichBSSID);
-
-
-PNET_DEV get_netdev_from_bssid(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR FromWhichBSSID);
-
-
-PNDIS_PACKET duplicate_pkt(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pHeader802_3,
- IN UINT HdrLen,
- IN PUCHAR pData,
- IN ULONG DataSize,
- IN UCHAR FromWhichBSSID);
-
-
-PNDIS_PACKET duplicate_pkt_with_TKIP_MIC(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pOldPkt);
-
-PNDIS_PACKET duplicate_pkt_with_VLAN(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pHeader802_3,
- IN UINT HdrLen,
- IN PUCHAR pData,
- IN ULONG DataSize,
- IN UCHAR FromWhichBSSID);
-
-PNDIS_PACKET duplicate_pkt_with_WPI(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket,
- IN UINT32 ext_head_len,
- IN UINT32 ext_tail_len);
-
-UCHAR VLAN_8023_Header_Copy(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pHeader802_3,
- IN UINT HdrLen,
- OUT PUCHAR pData,
- IN UCHAR FromWhichBSSID);
-
-void ba_flush_reordering_timeout_mpdus(
- IN PRTMP_ADAPTER pAd,
- IN PBA_REC_ENTRY pBAEntry,
- IN ULONG Now32);
-
-
-VOID BAOriSessionSetUp(
- IN PRTMP_ADAPTER pAd,
- IN MAC_TABLE_ENTRY *pEntry,
- IN UCHAR TID,
- IN USHORT TimeOut,
- IN ULONG DelayTime,
- IN BOOLEAN isForced);
-
-VOID BASessionTearDownALL(
- IN OUT PRTMP_ADAPTER pAd,
- IN UCHAR Wcid);
-
-BOOLEAN OS_Need_Clone_Packet(void);
-
-
-VOID build_tx_packet(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket,
- IN PUCHAR pFrame,
- IN ULONG FrameLen);
-
-
-VOID BAOriSessionTearDown(
- IN OUT PRTMP_ADAPTER pAd,
- IN UCHAR Wcid,
- IN UCHAR TID,
- IN BOOLEAN bPassive,
- IN BOOLEAN bForceSend);
-
-VOID BARecSessionTearDown(
- IN OUT PRTMP_ADAPTER pAd,
- IN UCHAR Wcid,
- IN UCHAR TID,
- IN BOOLEAN bPassive);
-
-BOOLEAN ba_reordering_resource_init(PRTMP_ADAPTER pAd, int num);
-void ba_reordering_resource_release(PRTMP_ADAPTER pAd);
-
-ULONG AutoChBssInsertEntry(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pBssid,
- IN CHAR Ssid[],
- IN UCHAR SsidLen,
- IN UCHAR ChannelNo,
- IN CHAR Rssi);
-
-void AutoChBssTableInit(
- IN PRTMP_ADAPTER pAd);
-
-void ChannelInfoInit(
- IN PRTMP_ADAPTER pAd);
-
-void AutoChBssTableDestroy(
- IN PRTMP_ADAPTER pAd);
-
-void ChannelInfoDestroy(
- IN PRTMP_ADAPTER pAd);
-
-UCHAR New_ApAutoSelectChannel(
- IN PRTMP_ADAPTER pAd);
-
-BOOLEAN rtstrmactohex(
- IN char *s1,
- IN char *s2);
-
-BOOLEAN rtstrcasecmp(
- IN char *s1,
- IN char *s2);
-
-char *rtstrstruncasecmp(
- IN char *s1,
- IN char *s2);
-
-char *rtstrstr(
- IN const char * s1,
- IN const char * s2);
-
-char *rstrtok(
- IN char * s,
- IN const char * ct);
-
-int rtinet_aton(
- const char *cp,
- unsigned int *addr);
-
-////////// common ioctl functions //////////
-INT Set_DriverVersion_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_CountryRegion_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_CountryRegionABand_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_WirelessMode_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_Channel_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_ShortSlot_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_TxPower_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_BGProtection_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_TxPreamble_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_RTSThreshold_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_FragThreshold_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_TxBurst_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-#ifdef AGGREGATION_SUPPORT
-INT Set_PktAggregate_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-#endif
-
-INT Set_IEEE80211H_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-#ifdef DBG
-INT Set_Debug_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-#endif
-
-INT Show_DescInfo_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_ResetStatCounter_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_BASetup_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_BADecline_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_BAOriTearDown_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_BARecTearDown_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_HtBw_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_HtMcs_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_HtGi_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_HtOpMode_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_HtStbc_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_HtHtc_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_HtExtcha_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_HtMpduDensity_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_HtBaWinSize_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_HtRdg_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_HtLinkAdapt_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_HtAmsdu_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_HtAutoBa_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_HtProtect_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_HtMimoPs_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-
-INT Set_ForceShortGI_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_ForceGF_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT SetCommonHT(
- IN PRTMP_ADAPTER pAd);
-
-INT Set_SendPSMPAction_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_HtMIMOPSmode_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-
-INT Set_HtTxBASize_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-//Dls , kathy
-VOID RTMPSendDLSTearDownFrame(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pDA);
-
-//Block ACK
-VOID QueryBATABLE(
- IN PRTMP_ADAPTER pAd,
- OUT PQUERYBA_TABLE pBAT);
-
-INT WpaCheckEapCode(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pFrame,
- IN USHORT FrameLen,
- IN USHORT OffSet);
-
-VOID WpaSendMicFailureToWpaSupplicant(
- IN PRTMP_ADAPTER pAd,
- IN BOOLEAN bUnicast);
-
-VOID SendAssocIEsToWpaSupplicant(
- IN PRTMP_ADAPTER pAd);
-
-int wext_notify_event_assoc(
- IN RTMP_ADAPTER *pAd);
-
-VOID Handle_BSS_Width_Trigger_Events(
- IN PRTMP_ADAPTER pAd);
-
-void build_ext_channel_switch_ie(
- IN PRTMP_ADAPTER pAd,
- IN HT_EXT_CHANNEL_SWITCH_ANNOUNCEMENT_IE *pIE);
-
-BOOLEAN APRxDoneInterruptHandle(
- IN PRTMP_ADAPTER pAd);
-
-BOOLEAN STARxDoneInterruptHandle(
- IN PRTMP_ADAPTER pAd,
- IN BOOLEAN argc);
-
-// AMPDU packet indication
-VOID Indicate_AMPDU_Packet(
- IN PRTMP_ADAPTER pAd,
- IN RX_BLK *pRxBlk,
- IN UCHAR FromWhichBSSID);
-
-// AMSDU packet indication
-VOID Indicate_AMSDU_Packet(
- IN PRTMP_ADAPTER pAd,
- IN RX_BLK *pRxBlk,
- IN UCHAR FromWhichBSSID);
-
-// Normal legacy Rx packet indication
-VOID Indicate_Legacy_Packet(
- IN PRTMP_ADAPTER pAd,
- IN RX_BLK *pRxBlk,
- IN UCHAR FromWhichBSSID);
-
-VOID Indicate_EAPOL_Packet(
- IN PRTMP_ADAPTER pAd,
- IN RX_BLK *pRxBlk,
- IN UCHAR FromWhichBSSID);
-
-void update_os_packet_info(
- IN PRTMP_ADAPTER pAd,
- IN RX_BLK *pRxBlk,
- IN UCHAR FromWhichBSSID);
-
-void wlan_802_11_to_802_3_packet(
- IN PRTMP_ADAPTER pAd,
- IN RX_BLK *pRxBlk,
- IN PUCHAR pHeader802_3,
- IN UCHAR FromWhichBSSID);
-
-UINT deaggregate_AMSDU_announce(
- IN PRTMP_ADAPTER pAd,
- PNDIS_PACKET pPacket,
- IN PUCHAR pData,
- IN ULONG DataSize);
-
-// remove LLC and get 802_3 Header
-#define RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(_pRxBlk, _pHeader802_3) \
-{ \
- PUCHAR _pRemovedLLCSNAP = NULL, _pDA, _pSA; \
- \
- if (RX_BLK_TEST_FLAG(_pRxBlk, fRX_MESH)) \
- { \
- _pDA = _pRxBlk->pHeader->Addr3; \
- _pSA = (PUCHAR)_pRxBlk->pHeader + sizeof(HEADER_802_11); \
- } \
- else \
- { \
- if (RX_BLK_TEST_FLAG(_pRxBlk, fRX_INFRA)) \
- { \
- _pDA = _pRxBlk->pHeader->Addr1; \
- if (RX_BLK_TEST_FLAG(_pRxBlk, fRX_DLS)) \
- _pSA = _pRxBlk->pHeader->Addr2; \
- else \
- _pSA = _pRxBlk->pHeader->Addr3; \
- } \
- else \
- { \
- _pDA = _pRxBlk->pHeader->Addr1; \
- _pSA = _pRxBlk->pHeader->Addr2; \
- } \
- } \
- \
- CONVERT_TO_802_3(_pHeader802_3, _pDA, _pSA, _pRxBlk->pData, \
- _pRxBlk->DataSize, _pRemovedLLCSNAP); \
-}
-
-BOOLEAN APFowardWirelessStaToWirelessSta(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket,
- IN ULONG FromWhichBSSID);
-
-VOID Announce_or_Forward_802_3_Packet(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket,
- IN UCHAR FromWhichBSSID);
-
-VOID Sta_Announce_or_Forward_802_3_Packet(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket,
- IN UCHAR FromWhichBSSID);
-
-#define ANNOUNCE_OR_FORWARD_802_3_PACKET(_pAd, _pPacket, _FromWhichBSS)\
- Sta_Announce_or_Forward_802_3_Packet(_pAd, _pPacket, _FromWhichBSS);
- //announce_802_3_packet(_pAd, _pPacket);
-
-PNDIS_PACKET DuplicatePacket(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket,
- IN UCHAR FromWhichBSSID);
-
-
-PNDIS_PACKET ClonePacket(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_PACKET pPacket,
- IN PUCHAR pData,
- IN ULONG DataSize);
-
-
-// Normal, AMPDU or AMSDU
-VOID CmmRxnonRalinkFrameIndicate(
- IN PRTMP_ADAPTER pAd,
- IN RX_BLK *pRxBlk,
- IN UCHAR FromWhichBSSID);
-
-VOID CmmRxRalinkFrameIndicate(
- IN PRTMP_ADAPTER pAd,
- IN MAC_TABLE_ENTRY *pEntry,
- IN RX_BLK *pRxBlk,
- IN UCHAR FromWhichBSSID);
-
-VOID Update_Rssi_Sample(
- IN PRTMP_ADAPTER pAd,
- IN RSSI_SAMPLE *pRssi,
- IN PRXWI_STRUC pRxWI);
-
-PNDIS_PACKET GetPacketFromRxRing(
- IN PRTMP_ADAPTER pAd,
- OUT PRT28XX_RXD_STRUC pSaveRxD,
- OUT BOOLEAN *pbReschedule,
- IN OUT UINT32 *pRxPending);
-
-PNDIS_PACKET RTMPDeFragmentDataFrame(
- IN PRTMP_ADAPTER pAd,
- IN RX_BLK *pRxBlk);
-
-////////////////////////////////////////
-enum {
- DIDmsg_lnxind_wlansniffrm = 0x00000044,
- DIDmsg_lnxind_wlansniffrm_hosttime = 0x00010044,
- DIDmsg_lnxind_wlansniffrm_mactime = 0x00020044,
- DIDmsg_lnxind_wlansniffrm_channel = 0x00030044,
- DIDmsg_lnxind_wlansniffrm_rssi = 0x00040044,
- DIDmsg_lnxind_wlansniffrm_sq = 0x00050044,
- DIDmsg_lnxind_wlansniffrm_signal = 0x00060044,
- DIDmsg_lnxind_wlansniffrm_noise = 0x00070044,
- DIDmsg_lnxind_wlansniffrm_rate = 0x00080044,
- DIDmsg_lnxind_wlansniffrm_istx = 0x00090044,
- DIDmsg_lnxind_wlansniffrm_frmlen = 0x000A0044
-};
-enum {
- P80211ENUM_msgitem_status_no_value = 0x00
-};
-enum {
- P80211ENUM_truth_false = 0x00,
- P80211ENUM_truth_true = 0x01
-};
-
-/* Definition from madwifi */
-typedef struct {
- UINT32 did;
- UINT16 status;
- UINT16 len;
- UINT32 data;
-} p80211item_uint32_t;
-
-typedef struct {
- UINT32 msgcode;
- UINT32 msglen;
-#define WLAN_DEVNAMELEN_MAX 16
- UINT8 devname[WLAN_DEVNAMELEN_MAX];
- p80211item_uint32_t hosttime;
- p80211item_uint32_t mactime;
- p80211item_uint32_t channel;
- p80211item_uint32_t rssi;
- p80211item_uint32_t sq;
- p80211item_uint32_t signal;
- p80211item_uint32_t noise;
- p80211item_uint32_t rate;
- p80211item_uint32_t istx;
- p80211item_uint32_t frmlen;
-} wlan_ng_prism2_header;
-
-/* The radio capture header precedes the 802.11 header. */
-typedef struct PACKED _ieee80211_radiotap_header {
- UINT8 it_version; /* Version 0. Only increases
- * for drastic changes,
- * introduction of compatible
- * new fields does not count.
- */
- UINT8 it_pad;
- UINT16 it_len; /* length of the whole
- * header in bytes, including
- * it_version, it_pad,
- * it_len, and data fields.
- */
- UINT32 it_present; /* A bitmap telling which
- * fields are present. Set bit 31
- * (0x80000000) to extend the
- * bitmap by another 32 bits.
- * Additional extensions are made
- * by setting bit 31.
- */
-}ieee80211_radiotap_header ;
-
-enum ieee80211_radiotap_type {
- IEEE80211_RADIOTAP_TSFT = 0,
- IEEE80211_RADIOTAP_FLAGS = 1,
- IEEE80211_RADIOTAP_RATE = 2,
- IEEE80211_RADIOTAP_CHANNEL = 3,
- IEEE80211_RADIOTAP_FHSS = 4,
- IEEE80211_RADIOTAP_DBM_ANTSIGNAL = 5,
- IEEE80211_RADIOTAP_DBM_ANTNOISE = 6,
- IEEE80211_RADIOTAP_LOCK_QUALITY = 7,
- IEEE80211_RADIOTAP_TX_ATTENUATION = 8,
- IEEE80211_RADIOTAP_DB_TX_ATTENUATION = 9,
- IEEE80211_RADIOTAP_DBM_TX_POWER = 10,
- IEEE80211_RADIOTAP_ANTENNA = 11,
- IEEE80211_RADIOTAP_DB_ANTSIGNAL = 12,
- IEEE80211_RADIOTAP_DB_ANTNOISE = 13
-};
-
-#define WLAN_RADIOTAP_PRESENT ( \
- (1 << IEEE80211_RADIOTAP_TSFT) | \
- (1 << IEEE80211_RADIOTAP_FLAGS) | \
- (1 << IEEE80211_RADIOTAP_RATE) | \
- 0)
-
-typedef struct _wlan_radiotap_header {
- ieee80211_radiotap_header wt_ihdr;
- INT64 wt_tsft;
- UINT8 wt_flags;
- UINT8 wt_rate;
-} wlan_radiotap_header;
-/* Definition from madwifi */
-
-void send_monitor_packets(
- IN PRTMP_ADAPTER pAd,
- IN RX_BLK *pRxBlk);
-
-#if WIRELESS_EXT >= 12
-// This function will be called when query /proc
-struct iw_statistics *rt28xx_get_wireless_stats(
- IN struct net_device *net_dev);
-#endif
-
-VOID RTMPSetDesiredRates(
- IN PRTMP_ADAPTER pAdapter,
- IN LONG Rates);
-
-INT Set_FixedTxMode_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-static inline char* GetPhyMode(
- int Mode)
-{
- switch(Mode)
- {
- case MODE_CCK:
- return "CCK";
-
- case MODE_OFDM:
- return "OFDM";
- case MODE_HTMIX:
- return "HTMIX";
-
- case MODE_HTGREENFIELD:
- return "GREEN";
- default:
- return "N/A";
- }
-}
-
-
-static inline char* GetBW(
- int BW)
-{
- switch(BW)
- {
- case BW_10:
- return "10M";
-
- case BW_20:
- return "20M";
- case BW_40:
- return "40M";
- default:
- return "N/A";
- }
-}
-
-
-VOID RT28xxThreadTerminate(
- IN RTMP_ADAPTER *pAd);
-
-BOOLEAN RT28XXChipsetCheck(
- IN void *_dev_p);
-
-BOOLEAN RT28XXNetDevInit(
- IN void *_dev_p,
- IN struct net_device *net_dev,
- IN RTMP_ADAPTER *pAd);
-
-BOOLEAN RT28XXProbePostConfig(
- IN void *_dev_p,
- IN RTMP_ADAPTER *pAd,
- IN INT32 argc);
-
-VOID RT28XXDMADisable(
- IN RTMP_ADAPTER *pAd);
-
-VOID RT28XXDMAEnable(
- IN RTMP_ADAPTER *pAd);
-
-VOID RT28xx_UpdateBeaconToAsic(
- IN RTMP_ADAPTER * pAd,
- IN INT apidx,
- IN ULONG BeaconLen,
- IN ULONG UpdatePos);
-
-INT rt28xx_ioctl(
- IN struct net_device *net_dev,
- IN OUT struct ifreq *rq,
- IN INT cmd);
-
-INT rt28xx_sta_ioctl(
- IN struct net_device *net_dev,
- IN OUT struct ifreq *rq,
- IN INT cmd);
-
-BOOLEAN RT28XXSecurityKeyAdd(
- IN PRTMP_ADAPTER pAd,
- IN ULONG apidx,
- IN ULONG KeyIdx,
- IN MAC_TABLE_ENTRY *pEntry);
-
-////////////////////////////////////////
-PNDIS_PACKET GetPacketFromRxRing(
- IN PRTMP_ADAPTER pAd,
- OUT PRT28XX_RXD_STRUC pSaveRxD,
- OUT BOOLEAN *pbReschedule,
- IN OUT UINT32 *pRxPending);
-
-
-void kill_thread_task(PRTMP_ADAPTER pAd);
-
-void tbtt_tasklet(unsigned long data);
-
-
-VOID AsicTurnOffRFClk(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Channel);
-
-VOID AsicTurnOnRFClk(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Channel);
-
-#ifdef RT30xx
-NTSTATUS RT30xxWriteRFRegister(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR RegID,
- IN UCHAR Value);
-
-NTSTATUS RT30xxReadRFRegister(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR RegID,
- IN PUCHAR pValue);
-
-//2008/09/11:KH add to support efuse<--
-UCHAR eFuseReadRegisters(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN USHORT Length,
- OUT USHORT* pData);
-
-VOID eFuseReadPhysical(
- IN PRTMP_ADAPTER pAd,
- IN PUSHORT lpInBuffer,
- IN ULONG nInBufferSize,
- OUT PUSHORT lpOutBuffer,
- IN ULONG nOutBufferSize
-);
-
-NTSTATUS eFuseRead(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- OUT PUCHAR pData,
- IN USHORT Length);
-
-VOID eFusePhysicalWriteRegisters(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN USHORT Length,
- OUT USHORT* pData);
-
-NTSTATUS eFuseWriteRegisters(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN USHORT Length,
- IN USHORT* pData);
-
-VOID eFuseWritePhysical(
- IN PRTMP_ADAPTER pAd,
- PUSHORT lpInBuffer,
- ULONG nInBufferSize,
- PUCHAR lpOutBuffer,
- ULONG nOutBufferSize
-);
-
-NTSTATUS eFuseWrite(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN PUCHAR pData,
- IN USHORT length);
-
-INT set_eFuseGetFreeBlockCount_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT set_eFusedump_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT set_eFuseLoadFromBin_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-NTSTATUS eFuseWriteRegistersFromBin(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN USHORT Length,
- IN USHORT* pData);
-
-VOID eFusePhysicalReadRegisters(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN USHORT Length,
- OUT USHORT* pData);
-
-NDIS_STATUS NICLoadEEPROM(
- IN PRTMP_ADAPTER pAd);
-
-BOOLEAN bNeedLoadEEPROM(
- IN PRTMP_ADAPTER pAd);
-//2008/09/11:KH add to support efuse-->
-#endif // RT30xx //
-
-#ifdef RT30xx
-// add by johnli, RF power sequence setup
-VOID RT30xxLoadRFNormalModeSetup(
- IN PRTMP_ADAPTER pAd);
-
-VOID RT30xxLoadRFSleepModeSetup(
- IN PRTMP_ADAPTER pAd);
-
-VOID RT30xxReverseRFSleepModeSetup(
- IN PRTMP_ADAPTER pAd);
-// end johnli
-#endif // RT30xx //
-
-#ifdef RT2870
-//
-// Function Prototype in rtusb_bulk.c
-//
-VOID RTUSBInitTxDesc(
- IN PRTMP_ADAPTER pAd,
- IN PTX_CONTEXT pTxContext,
- IN UCHAR BulkOutPipeId,
- IN usb_complete_t Func);
-
-VOID RTUSBInitHTTxDesc(
- IN PRTMP_ADAPTER pAd,
- IN PHT_TX_CONTEXT pTxContext,
- IN UCHAR BulkOutPipeId,
- IN ULONG BulkOutSize,
- IN usb_complete_t Func);
-
-VOID RTUSBInitRxDesc(
- IN PRTMP_ADAPTER pAd,
- IN PRX_CONTEXT pRxContext);
-
-VOID RTUSBCleanUpDataBulkOutQueue(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTUSBCancelPendingBulkOutIRP(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTUSBBulkOutDataPacket(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR BulkOutPipeId,
- IN UCHAR Index);
-
-VOID RTUSBBulkOutNullFrame(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTUSBBulkOutRTSFrame(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTUSBCancelPendingBulkInIRP(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTUSBCancelPendingIRPs(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTUSBBulkOutMLMEPacket(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Index);
-
-VOID RTUSBBulkOutPsPoll(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTUSBCleanUpMLMEBulkOutQueue(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTUSBKickBulkOut(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTUSBBulkReceive(
- IN PRTMP_ADAPTER pAd);
-
-VOID DoBulkIn(
- IN RTMP_ADAPTER *pAd);
-
-VOID RTUSBInitRxDesc(
- IN PRTMP_ADAPTER pAd,
- IN PRX_CONTEXT pRxContext);
-
-VOID RTUSBBulkRxHandle(
- IN unsigned long data);
-
-//
-// Function Prototype in rtusb_io.c
-//
-NTSTATUS RTUSBMultiRead(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- OUT PUCHAR pData,
- IN USHORT length);
-
-NTSTATUS RTUSBMultiWrite(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN PUCHAR pData,
- IN USHORT length);
-
-NTSTATUS RTUSBMultiWrite_OneByte(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN PUCHAR pData);
-
-NTSTATUS RTUSBReadBBPRegister(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Id,
- IN PUCHAR pValue);
-
-NTSTATUS RTUSBWriteBBPRegister(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR Id,
- IN UCHAR Value);
-
-NTSTATUS RTUSBWriteRFRegister(
- IN PRTMP_ADAPTER pAd,
- IN UINT32 Value);
-
-#ifndef RT30xx
-NTSTATUS RT30xxWriteRFRegister(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR RegID,
- IN UCHAR Value);
-
-NTSTATUS RT30xxReadRFRegister(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR RegID,
- IN PUCHAR pValue);
-#endif
-
-NTSTATUS RTUSB_VendorRequest(
- IN PRTMP_ADAPTER pAd,
- IN UINT32 TransferFlags,
- IN UCHAR ReservedBits,
- IN UCHAR Request,
- IN USHORT Value,
- IN USHORT Index,
- IN PVOID TransferBuffer,
- IN UINT32 TransferBufferLength);
-
-NTSTATUS RTUSBReadEEPROM(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- OUT PUCHAR pData,
- IN USHORT length);
-
-NTSTATUS RTUSBWriteEEPROM(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN PUCHAR pData,
- IN USHORT length);
-
-VOID RTUSBPutToSleep(
- IN PRTMP_ADAPTER pAd);
-
-NTSTATUS RTUSBWakeUp(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTUSBInitializeCmdQ(
- IN PCmdQ cmdq);
-
-NDIS_STATUS RTUSBEnqueueCmdFromNdis(
- IN PRTMP_ADAPTER pAd,
- IN NDIS_OID Oid,
- IN BOOLEAN SetInformation,
- IN PVOID pInformationBuffer,
- IN UINT32 InformationBufferLength);
-
-NDIS_STATUS RTUSBEnqueueInternalCmd(
- IN PRTMP_ADAPTER pAd,
- IN NDIS_OID Oid,
- IN PVOID pInformationBuffer,
- IN UINT32 InformationBufferLength);
-
-VOID RTUSBDequeueCmd(
- IN PCmdQ cmdq,
- OUT PCmdQElmt *pcmdqelmt);
-
-INT RTUSBCmdThread(
- IN OUT PVOID Context);
-
-INT TimerQThread(
- IN OUT PVOID Context);
-
-RT2870_TIMER_ENTRY *RT2870_TimerQ_Insert(
- IN RTMP_ADAPTER *pAd,
- IN RALINK_TIMER_STRUCT *pTimer);
-
-BOOLEAN RT2870_TimerQ_Remove(
- IN RTMP_ADAPTER *pAd,
- IN RALINK_TIMER_STRUCT *pTimer);
-
-void RT2870_TimerQ_Exit(
- IN RTMP_ADAPTER *pAd);
-
-void RT2870_TimerQ_Init(
- IN RTMP_ADAPTER *pAd);
-
-VOID RT2870_BssBeaconExit(
- IN RTMP_ADAPTER *pAd);
-
-VOID RT2870_BssBeaconStop(
- IN RTMP_ADAPTER *pAd);
-
-VOID RT2870_BssBeaconStart(
- IN RTMP_ADAPTER * pAd);
-
-VOID RT2870_BssBeaconInit(
- IN RTMP_ADAPTER *pAd);
-
-VOID RT2870_WatchDog(
- IN RTMP_ADAPTER *pAd);
-
-NTSTATUS RTUSBWriteMACRegister(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- IN UINT32 Value);
-
-NTSTATUS RTUSBReadMACRegister(
- IN PRTMP_ADAPTER pAd,
- IN USHORT Offset,
- OUT PUINT32 pValue);
-
-NTSTATUS RTUSBSingleWrite(
- IN RTMP_ADAPTER *pAd,
- IN USHORT Offset,
- IN USHORT Value);
-
-NTSTATUS RTUSBFirmwareRun(
- IN PRTMP_ADAPTER pAd);
-
-NTSTATUS RTUSBFirmwareWrite(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pFwImage,
- IN ULONG FwLen);
-
-NTSTATUS RTUSBFirmwareOpmode(
- IN PRTMP_ADAPTER pAd,
- OUT PUINT32 pValue);
-
-NTSTATUS RTUSBVenderReset(
- IN PRTMP_ADAPTER pAd);
-
-NDIS_STATUS RTUSBSetHardWareRegister(
- IN PRTMP_ADAPTER pAdapter,
- IN PVOID pBuf);
-
-NDIS_STATUS RTUSBQueryHardWareRegister(
- IN PRTMP_ADAPTER pAdapter,
- IN PVOID pBuf);
-
-VOID CMDHandler(
- IN PRTMP_ADAPTER pAd);
-
-
-NDIS_STATUS CreateThreads(
- IN struct net_device *net_dev );
-
-
-VOID MacTableInitialize(
- IN PRTMP_ADAPTER pAd);
-
-VOID MlmeSetPsm(
- IN PRTMP_ADAPTER pAd,
- IN USHORT psm);
-
-NDIS_STATUS RTMPWPAAddKeyProc(
- IN PRTMP_ADAPTER pAd,
- IN PVOID pBuf);
-
-VOID AsicRxAntEvalAction(
- IN PRTMP_ADAPTER pAd);
-
-void append_pkt(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pHeader802_3,
- IN UINT HdrLen,
- IN PUCHAR pData,
- IN ULONG DataSize,
- OUT PNDIS_PACKET *ppPacket);
-
-UINT deaggregate_AMSDU_announce(
- IN PRTMP_ADAPTER pAd,
- PNDIS_PACKET pPacket,
- IN PUCHAR pData,
- IN ULONG DataSize);
-
-NDIS_STATUS RTMPCheckRxError(
- IN PRTMP_ADAPTER pAd,
- IN PHEADER_802_11 pHeader,
- IN PRXWI_STRUC pRxWI,
- IN PRT28XX_RXD_STRUC pRxINFO);
-
-
-VOID RTUSBMlmeHardTransmit(
- IN PRTMP_ADAPTER pAd,
- IN PMGMT_STRUC pMgmt);
-
-INT MlmeThread(
- IN PVOID Context);
-
-//
-// Function Prototype in rtusb_data.c
-//
-NDIS_STATUS RTUSBFreeDescriptorRequest(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR BulkOutPipeId,
- IN UINT32 NumberRequired);
-
-
-BOOLEAN RTUSBNeedQueueBackForAgg(
- IN RTMP_ADAPTER *pAd,
- IN UCHAR BulkOutPipeId);
-
-
-VOID RTMPWriteTxInfo(
- IN PRTMP_ADAPTER pAd,
- IN PTXINFO_STRUC pTxInfo,
- IN USHORT USBDMApktLen,
- IN BOOLEAN bWiv,
- IN UCHAR QueueSel,
- IN UCHAR NextValid,
- IN UCHAR TxBurst);
-
-//
-// Function Prototype in cmm_data_2870.c
-//
-USHORT RtmpUSB_WriteSubTxResource(
- IN PRTMP_ADAPTER pAd,
- IN TX_BLK *pTxBlk,
- IN BOOLEAN bIsLast,
- OUT USHORT *FreeNumber);
-
-USHORT RtmpUSB_WriteSingleTxResource(
- IN PRTMP_ADAPTER pAd,
- IN TX_BLK *pTxBlk,
- IN BOOLEAN bIsLast,
- OUT USHORT *FreeNumber);
-
-USHORT RtmpUSB_WriteFragTxResource(
- IN PRTMP_ADAPTER pAd,
- IN TX_BLK *pTxBlk,
- IN UCHAR fragNum,
- OUT USHORT *FreeNumber);
-
-USHORT RtmpUSB_WriteMultiTxResource(
- IN PRTMP_ADAPTER pAd,
- IN TX_BLK *pTxBlk,
- IN UCHAR frameNum,
- OUT USHORT *FreeNumber);
-
-VOID RtmpUSB_FinalWriteTxResource(
- IN PRTMP_ADAPTER pAd,
- IN TX_BLK *pTxBlk,
- IN USHORT totalMPDUSize,
- IN USHORT TxIdx);
-
-VOID RtmpUSBDataLastTxIdx(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR QueIdx,
- IN USHORT TxIdx);
-
-VOID RtmpUSBDataKickOut(
- IN PRTMP_ADAPTER pAd,
- IN TX_BLK *pTxBlk,
- IN UCHAR QueIdx);
-
-
-int RtmpUSBMgmtKickOut(
- IN RTMP_ADAPTER *pAd,
- IN UCHAR QueIdx,
- IN PNDIS_PACKET pPacket,
- IN PUCHAR pSrcBufVA,
- IN UINT SrcBufLen);
-
-VOID RtmpUSBNullFrameKickOut(
- IN RTMP_ADAPTER *pAd,
- IN UCHAR QueIdx,
- IN UCHAR *pNullFrame,
- IN UINT32 frameLen);
-
-VOID RT28xxUsbStaAsicForceWakeup(
- IN PRTMP_ADAPTER pAd,
- IN BOOLEAN bFromTx);
-
-VOID RT28xxUsbStaAsicSleepThenAutoWakeup(
- IN PRTMP_ADAPTER pAd,
- IN USHORT TbttNumToNextWakeUp);
-
-VOID RT28xxUsbMlmeRadioOn(
- IN PRTMP_ADAPTER pAd);
-
-VOID RT28xxUsbMlmeRadioOFF(
- IN PRTMP_ADAPTER pAd);
-#endif // RT2870 //
-
-////////////////////////////////////////
-
-VOID QBSS_LoadInit(
- IN RTMP_ADAPTER *pAd);
-
-UINT32 QBSS_LoadElementAppend(
- IN RTMP_ADAPTER *pAd,
- OUT UINT8 *buf_p);
-
-VOID QBSS_LoadUpdate(
- IN RTMP_ADAPTER *pAd);
-
-///////////////////////////////////////
-INT RTMPShowCfgValue(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pName,
- IN PUCHAR pBuf);
-
-PCHAR RTMPGetRalinkAuthModeStr(
- IN NDIS_802_11_AUTHENTICATION_MODE authMode);
-
-PCHAR RTMPGetRalinkEncryModeStr(
- IN USHORT encryMode);
-//////////////////////////////////////
-
-VOID AsicStaBbpTuning(
- IN PRTMP_ADAPTER pAd);
-
-BOOLEAN StaAddMacTableEntry(
- IN PRTMP_ADAPTER pAd,
- IN PMAC_TABLE_ENTRY pEntry,
- IN UCHAR MaxSupportedRateIn500Kbps,
- IN HT_CAPABILITY_IE *pHtCapability,
- IN UCHAR HtCapabilityLen,
- IN USHORT CapabilityInfo);
-
-void RTMP_IndicateMediaState(
- IN PRTMP_ADAPTER pAd);
-
-VOID ReSyncBeaconTime(
- IN PRTMP_ADAPTER pAd);
-
-VOID RTMPSetAGCInitValue(
- IN PRTMP_ADAPTER pAd,
- IN UCHAR BandWidth);
-
-int rt28xx_close(IN PNET_DEV dev);
-int rt28xx_open(IN PNET_DEV dev);
-
-__inline INT VIRTUAL_IF_UP(PRTMP_ADAPTER pAd)
-{
-extern VOID MeshMakeBeacon(IN PRTMP_ADAPTER pAd, IN UCHAR idx);
-extern VOID MeshUpdateBeaconFrame(IN PRTMP_ADAPTER pAd, IN UCHAR idx);
-
- if (VIRTUAL_IF_NUM(pAd) == 0)
- {
- if (rt28xx_open(pAd->net_dev) != 0)
- return -1;
- }
- else
- {
- }
- VIRTUAL_IF_INC(pAd);
- return 0;
-}
-
-__inline VOID VIRTUAL_IF_DOWN(PRTMP_ADAPTER pAd)
-{
- VIRTUAL_IF_DEC(pAd);
- if (VIRTUAL_IF_NUM(pAd) == 0)
- rt28xx_close(pAd->net_dev);
- return;
-}
-
-
-#endif // __RTMP_H__
-
+#include "../rt2860/rtmp.h"
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
-
- Module Name:
- rtmp_ckipmic.h
-
- Abstract:
-
- Revision History:
- Who When What
- -------- ---------- ----------------------------------------------
- Name Date Modification logs
-*/
-#ifndef __RTMP_CKIPMIC_H__
-#define __RTMP_CKIPMIC_H__
-
-typedef struct _MIC_CONTEXT {
- /* --- MMH context */
- UCHAR CK[16]; /* the key */
- UCHAR coefficient[16]; /* current aes counter mode coefficients */
- ULONGLONG accum; /* accumulated mic, reduced to u32 in final() */
- UINT position; /* current position (byte offset) in message */
- UCHAR part[4]; /* for conversion of message to u32 for mmh */
-} MIC_CONTEXT, *PMIC_CONTEXT;
-
-VOID CKIP_key_permute(
- OUT UCHAR *PK, /* output permuted key */
- IN UCHAR *CK, /* input CKIP key */
- IN UCHAR toDsFromDs, /* input toDs/FromDs bits */
- IN UCHAR *piv); /* input pointer to IV */
-
-VOID RTMPCkipMicInit(
- IN PMIC_CONTEXT pContext,
- IN PUCHAR CK);
-
-VOID RTMPMicUpdate(
- IN PMIC_CONTEXT pContext,
- IN PUCHAR pOctets,
- IN INT len);
-
-ULONG RTMPMicGetCoefficient(
- IN PMIC_CONTEXT pContext);
-
-VOID xor_128(
- IN PUCHAR a,
- IN PUCHAR b,
- OUT PUCHAR out);
-
-UCHAR RTMPCkipSbox(
- IN UCHAR a);
-
-VOID xor_32(
- IN PUCHAR a,
- IN PUCHAR b,
- OUT PUCHAR out);
-
-VOID next_key(
- IN PUCHAR key,
- IN INT round);
-
-VOID byte_sub(
- IN PUCHAR in,
- OUT PUCHAR out);
-
-VOID shift_row(
- IN PUCHAR in,
- OUT PUCHAR out);
-
-VOID mix_column(
- IN PUCHAR in,
- OUT PUCHAR out);
-
-VOID RTMPAesEncrypt(
- IN PUCHAR key,
- IN PUCHAR data,
- IN PUCHAR ciphertext);
-
-VOID RTMPMicFinal(
- IN PMIC_CONTEXT pContext,
- OUT UCHAR digest[4]);
-
-VOID RTMPCkipInsertCMIC(
- IN PRTMP_ADAPTER pAd,
- OUT PUCHAR pMIC,
- IN PUCHAR p80211hdr,
- IN PNDIS_PACKET pPacket,
- IN PCIPHER_KEY pKey,
- IN PUCHAR mic_snap);
-
-#endif //__RTMP_CKIPMIC_H__
+#include "../rt2860/rtmp_ckipmic.h"
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
-
- Module Name:
- rtmp_def.h
-
- Abstract:
- Miniport related definition header
-
- Revision History:
- Who When What
- -------- ---------- ----------------------------------------------
- Paul Lin 08-01-2002 created
- John Chang 08-05-2003 add definition for 11g & other drafts
-*/
-#ifndef __RTMP_DEF_H__
-#define __RTMP_DEF_H__
-
-#include "oid.h"
-
-//
-// Debug information verbosity: lower values indicate higher urgency
-//
-#define RT_DEBUG_OFF 0
-#define RT_DEBUG_ERROR 1
-#define RT_DEBUG_WARN 2
-#define RT_DEBUG_TRACE 3
-#define RT_DEBUG_INFO 4
-#define RT_DEBUG_LOUD 5
-
-#define NIC_TAG ((ULONG)'0682')
-#define NIC_DBG_STRING ("**RT28xx**")
-
-#define RALINK_2883_VERSION ((UINT32)0x28830300)
-#define RALINK_2880E_VERSION ((UINT32)0x28720200)
-#define RALINK_3070_VERSION ((UINT32)0x30700200)
-
-//
-// NDIS version in use by the NIC driver.
-// The high byte is the major version. The low byte is the minor version.
-//
-#ifdef NDIS51_MINIPORT
-#define NIC_DRIVER_VERSION 0x0501
-#else
-#define NIC_DRIVER_VERSION 0x0500
-#endif
-
-//
-// NDIS media type, current is ethernet, change if native wireless supported
-//
-#define NIC_MEDIA_TYPE NdisMedium802_3
-#define NIC_PCI_HDR_LENGTH 0xe2
-#define NIC_MAX_PACKET_SIZE 2304
-#define NIC_HEADER_SIZE 14
-#define MAX_MAP_REGISTERS_NEEDED 32
-#define MIN_MAP_REGISTERS_NEEDED 2 //Todo: should consider fragment issue.
-
-//
-// interface type, we use PCI
-//
-#define NIC_INTERFACE_TYPE NdisInterfacePci
-#define NIC_INTERRUPT_MODE NdisInterruptLevelSensitive
-
-//
-// buffer size passed in NdisMQueryAdapterResources
-// We should only need three adapter resources (IO, interrupt and memory),
-// Some devices get extra resources, so have room for 10 resources
-// UF_SIZE (sizeof(NDIS_RESOURCE_LIST) + (10*sizeof(CM_PARTIAL_RESOURCE_DESCRIPTOR)))
-
-
-#define NIC_RESOURCE_B//
-// IO space length
-//
-#define NIC_MAP_IOSPACE_LENGTH sizeof(CSR_STRUC)
-
-#define MAX_RX_PKT_LEN 1520
-
-//
-// Entry number for each DMA descriptor ring
-//
-
-
-#ifdef RT2870
-#define TX_RING_SIZE 8 // 1
-#define PRIO_RING_SIZE 8
-#define MGMT_RING_SIZE 32 // PRIO_RING_SIZE
-#define RX_RING_SIZE 8
-#define MAX_TX_PROCESS 4
-#define LOCAL_TXBUF_SIZE 2048
-#endif // RT2870 //
-
-#define MAX_RX_PROCESS 128 //64 //32
-#define NUM_OF_LOCAL_TXBUF 2
-#define TXD_SIZE 16
-#define TXWI_SIZE 16
-#define RXD_SIZE 16
-#define RXWI_SIZE 16
-// TXINFO_SIZE + TXWI_SIZE + 802.11 Header Size + AMSDU sub frame header
-#define TX_DMA_1ST_BUFFER_SIZE 96 // only the 1st physical buffer is pre-allocated
-#define MGMT_DMA_BUFFER_SIZE 1536 //2048
-#define RX_BUFFER_AGGRESIZE 3840 //3904 //3968 //4096 //2048 //4096
-#define RX_BUFFER_NORMSIZE 3840 //3904 //3968 //4096 //2048 //4096
-#define TX_BUFFER_NORMSIZE RX_BUFFER_NORMSIZE
-#define MAX_FRAME_SIZE 2346 // Maximum 802.11 frame size
-#define MAX_AGGREGATION_SIZE 3840 //3904 //3968 //4096
-#define MAX_NUM_OF_TUPLE_CACHE 2
-#define MAX_MCAST_LIST_SIZE 32
-#define MAX_LEN_OF_VENDOR_DESC 64
-//#define MAX_SIZE_OF_MCAST_PSQ (NUM_OF_LOCAL_TXBUF >> 2) // AP won't spend more than 1/4 of total buffers on M/BCAST PSQ
-#define MAX_SIZE_OF_MCAST_PSQ 32
-
-#define MAX_RX_PROCESS_CNT (RX_RING_SIZE)
-
-
-#define MAX_PACKETS_IN_QUEUE (512) //(512) // to pass WMM A5-WPAPSK
-#define MAX_PACKETS_IN_MCAST_PS_QUEUE 32
-#define MAX_PACKETS_IN_PS_QUEUE 128 //32
-#define WMM_NUM_OF_AC 4 /* AC0, AC1, AC2, and AC3 */
-
-#ifdef RT30xx
-//2008/09/11:KH add to support efuse<--
-#define MAX_EEPROM_BIN_FILE_SIZE 1024
-//2008/09/11:KH add to support efuse-->
-#endif
-
-// RxFilter
-#define STANORMAL 0x17f97
-#define APNORMAL 0x15f97
-//
-// RTMP_ADAPTER flags
-//
-#define fRTMP_ADAPTER_MAP_REGISTER 0x00000001
-#define fRTMP_ADAPTER_INTERRUPT_IN_USE 0x00000002
-#define fRTMP_ADAPTER_HARDWARE_ERROR 0x00000004
-#define fRTMP_ADAPTER_SCATTER_GATHER 0x00000008
-#define fRTMP_ADAPTER_SEND_PACKET_ERROR 0x00000010
-#define fRTMP_ADAPTER_MLME_RESET_IN_PROGRESS 0x00000020
-#define fRTMP_ADAPTER_HALT_IN_PROGRESS 0x00000040
-#define fRTMP_ADAPTER_RESET_IN_PROGRESS 0x00000080
-#define fRTMP_ADAPTER_NIC_NOT_EXIST 0x00000100
-#define fRTMP_ADAPTER_TX_RING_ALLOCATED 0x00000200
-#define fRTMP_ADAPTER_REMOVE_IN_PROGRESS 0x00000400
-#define fRTMP_ADAPTER_MIMORATE_INUSED 0x00000800
-#define fRTMP_ADAPTER_RX_RING_ALLOCATED 0x00001000
-#define fRTMP_ADAPTER_INTERRUPT_ACTIVE 0x00002000
-#define fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS 0x00004000
-#define fRTMP_ADAPTER_REASSOC_IN_PROGRESS 0x00008000
-#define fRTMP_ADAPTER_MEDIA_STATE_PENDING 0x00010000
-#define fRTMP_ADAPTER_RADIO_OFF 0x00020000
-#define fRTMP_ADAPTER_BULKOUT_RESET 0x00040000
-#define fRTMP_ADAPTER_BULKIN_RESET 0x00080000
-#define fRTMP_ADAPTER_RDG_ACTIVE 0x00100000
-#define fRTMP_ADAPTER_DYNAMIC_BE_TXOP_ACTIVE 0x00200000
-#define fRTMP_ADAPTER_SCAN_2040 0x04000000
-#define fRTMP_ADAPTER_RADIO_MEASUREMENT 0x08000000
-
-#define fRTMP_ADAPTER_START_UP 0x10000000 //Devive already initialized and enabled Tx/Rx.
-#define fRTMP_ADAPTER_MEDIA_STATE_CHANGE 0x20000000
-#define fRTMP_ADAPTER_IDLE_RADIO_OFF 0x40000000
-
-//
-// STA operation status flags
-//
-#define fOP_STATUS_INFRA_ON 0x00000001
-#define fOP_STATUS_ADHOC_ON 0x00000002
-#define fOP_STATUS_BG_PROTECTION_INUSED 0x00000004
-#define fOP_STATUS_SHORT_SLOT_INUSED 0x00000008
-#define fOP_STATUS_SHORT_PREAMBLE_INUSED 0x00000010
-#define fOP_STATUS_RECEIVE_DTIM 0x00000020
-#define fOP_STATUS_MEDIA_STATE_CONNECTED 0x00000080
-#define fOP_STATUS_WMM_INUSED 0x00000100
-#define fOP_STATUS_AGGREGATION_INUSED 0x00000200
-#define fOP_STATUS_DOZE 0x00000400 // debug purpose
-#define fOP_STATUS_PIGGYBACK_INUSED 0x00000800 // piggy-back, and aggregation
-#define fOP_STATUS_APSD_INUSED 0x00001000
-#define fOP_STATUS_TX_AMSDU_INUSED 0x00002000
-#define fOP_STATUS_MAX_RETRY_ENABLED 0x00004000
-#define fOP_STATUS_WAKEUP_NOW 0x00008000
-#define fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE 0x00020000
-
-#define CCKSETPROTECT 0x1
-#define OFDMSETPROTECT 0x2
-#define MM20SETPROTECT 0x4
-#define MM40SETPROTECT 0x8
-#define GF20SETPROTECT 0x10
-#define GR40SETPROTECT 0x20
-#define ALLN_SETPROTECT (GR40SETPROTECT | GF20SETPROTECT | MM40SETPROTECT | MM20SETPROTECT)
-
-//
-// AP's client table operation status flags
-//
-#define fCLIENT_STATUS_WMM_CAPABLE 0x00000001 // CLIENT can parse QOS DATA frame
-#define fCLIENT_STATUS_AGGREGATION_CAPABLE 0x00000002 // CLIENT can receive Ralink's proprietary TX aggregation frame
-#define fCLIENT_STATUS_PIGGYBACK_CAPABLE 0x00000004 // CLIENT support piggy-back
-#define fCLIENT_STATUS_AMSDU_INUSED 0x00000008
-#define fCLIENT_STATUS_SGI20_CAPABLE 0x00000010
-#define fCLIENT_STATUS_SGI40_CAPABLE 0x00000020
-#define fCLIENT_STATUS_TxSTBC_CAPABLE 0x00000040
-#define fCLIENT_STATUS_RxSTBC_CAPABLE 0x00000080
-#define fCLIENT_STATUS_HTC_CAPABLE 0x00000100
-#define fCLIENT_STATUS_RDG_CAPABLE 0x00000200
-#define fCLIENT_STATUS_MCSFEEDBACK_CAPABLE 0x00000400
-#define fCLIENT_STATUS_APSD_CAPABLE 0x00000800 /* UAPSD STATION */
-
-#define fCLIENT_STATUS_RALINK_CHIPSET 0x00100000
-//
-// STA configuration flags
-//
-
-// 802.11n Operating Mode Definition. 0-3 also used in ASICUPdateProtect switch case
-#define HT_NO_PROTECT 0
-#define HT_LEGACY_PROTECT 1
-#define HT_40_PROTECT 2
-#define HT_2040_PROTECT 3
-#define HT_RTSCTS_6M 7
-//following is our own definition in order to turn on our ASIC protection register in INFRASTRUCTURE.
-#define HT_ATHEROS 8 // rt2860c has problem with atheros chip. we need to turn on RTS/CTS .
-#define HT_FORCERTSCTS 9 // Force turn on RTS/CTS first. then go to evaluate if this force RTS is necessary.
-
-//
-// RX Packet Filter control flags. Apply on pAd->PacketFilter
-//
-#define fRX_FILTER_ACCEPT_DIRECT NDIS_PACKET_TYPE_DIRECTED
-#define fRX_FILTER_ACCEPT_MULTICAST NDIS_PACKET_TYPE_MULTICAST
-#define fRX_FILTER_ACCEPT_BROADCAST NDIS_PACKET_TYPE_BROADCAST
-#define fRX_FILTER_ACCEPT_ALL_MULTICAST NDIS_PACKET_TYPE_ALL_MULTICAST
-
-//
-// Error code section
-//
-// NDIS_ERROR_CODE_ADAPTER_NOT_FOUND
-#define ERRLOG_READ_PCI_SLOT_FAILED 0x00000101L
-#define ERRLOG_WRITE_PCI_SLOT_FAILED 0x00000102L
-#define ERRLOG_VENDOR_DEVICE_NOMATCH 0x00000103L
-
-// NDIS_ERROR_CODE_ADAPTER_DISABLED
-#define ERRLOG_BUS_MASTER_DISABLED 0x00000201L
-
-// NDIS_ERROR_CODE_UNSUPPORTED_CONFIGURATION
-#define ERRLOG_INVALID_SPEED_DUPLEX 0x00000301L
-#define ERRLOG_SET_SECONDARY_FAILED 0x00000302L
-
-// NDIS_ERROR_CODE_OUT_OF_RESOURCES
-#define ERRLOG_OUT_OF_MEMORY 0x00000401L
-#define ERRLOG_OUT_OF_SHARED_MEMORY 0x00000402L
-#define ERRLOG_OUT_OF_MAP_REGISTERS 0x00000403L
-#define ERRLOG_OUT_OF_BUFFER_POOL 0x00000404L
-#define ERRLOG_OUT_OF_NDIS_BUFFER 0x00000405L
-#define ERRLOG_OUT_OF_PACKET_POOL 0x00000406L
-#define ERRLOG_OUT_OF_NDIS_PACKET 0x00000407L
-#define ERRLOG_OUT_OF_LOOKASIDE_MEMORY 0x00000408L
-
-// NDIS_ERROR_CODE_HARDWARE_FAILURE
-#define ERRLOG_SELFTEST_FAILED 0x00000501L
-#define ERRLOG_INITIALIZE_ADAPTER 0x00000502L
-#define ERRLOG_REMOVE_MINIPORT 0x00000503L
-
-// NDIS_ERROR_CODE_RESOURCE_CONFLICT
-#define ERRLOG_MAP_IO_SPACE 0x00000601L
-#define ERRLOG_QUERY_ADAPTER_RESOURCES 0x00000602L
-#define ERRLOG_NO_IO_RESOURCE 0x00000603L
-#define ERRLOG_NO_INTERRUPT_RESOURCE 0x00000604L
-#define ERRLOG_NO_MEMORY_RESOURCE 0x00000605L
-
-
-// WDS definition
-#define MAX_WDS_ENTRY 4
-#define WDS_PAIRWISE_KEY_OFFSET 60 // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table
-
-#define WDS_DISABLE_MODE 0
-#define WDS_RESTRICT_MODE 1
-#define WDS_BRIDGE_MODE 2
-#define WDS_REPEATER_MODE 3
-#define WDS_LAZY_MODE 4
-
-
-#define MAX_MESH_NUM 0
-
-#define MAX_APCLI_NUM 0
-
-#define MAX_MBSSID_NUM 1
-#ifdef RT30xx
-#ifdef MBSS_SUPPORT
-#undef MAX_MBSSID_NUM
-#define MAX_MBSSID_NUM (8 - MAX_MESH_NUM - MAX_APCLI_NUM)
-#endif // MBSS_SUPPORT //
-#endif
-
-/* sanity check for apidx */
-#define MBSS_MR_APIDX_SANITY_CHECK(apidx) \
- { if (apidx > MAX_MBSSID_NUM) { \
- printk("%s> Error! apidx = %d > MAX_MBSSID_NUM!\n", __func__, apidx); \
- apidx = MAIN_MBSSID; } }
-
-#define VALID_WCID(_wcid) ((_wcid) > 0 && (_wcid) < MAX_LEN_OF_MAC_TABLE )
-
-#define MAIN_MBSSID 0
-#define FIRST_MBSSID 1
-
-
-#define MAX_BEACON_SIZE 512
-// If the MAX_MBSSID_NUM is larger than 6,
-// it shall reserve some WCID space(wcid 222~253) for beacon frames.
-// - these wcid 238~253 are reserved for beacon#6(ra6).
-// - these wcid 222~237 are reserved for beacon#7(ra7).
-#if defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 8)
-#define HW_RESERVED_WCID 222
-#elif defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 7)
-#define HW_RESERVED_WCID 238
-#else
-#define HW_RESERVED_WCID 255
-#endif
-
-// Then dedicate wcid of DFS and Carrier-Sense.
-#define DFS_CTS_WCID (HW_RESERVED_WCID - 1)
-#define CS_CTS_WCID (HW_RESERVED_WCID - 2)
-#define LAST_SPECIFIC_WCID (HW_RESERVED_WCID - 2)
-
-// If MAX_MBSSID_NUM is 8, the maximum available wcid for the associated STA is 211.
-// If MAX_MBSSID_NUM is 7, the maximum available wcid for the associated STA is 228.
-#define MAX_AVAILABLE_CLIENT_WCID (LAST_SPECIFIC_WCID - MAX_MBSSID_NUM - 1)
-
-// TX need WCID to find Cipher Key
-// these wcid 212 ~ 219 are reserved for bc/mc packets if MAX_MBSSID_NUM is 8.
-#define GET_GroupKey_WCID(__wcid, __bssidx) \
- { \
- __wcid = LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM) + __bssidx; \
- }
-
-#define IsGroupKeyWCID(__wcid) (((__wcid) < LAST_SPECIFIC_WCID) && ((__wcid) >= (LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM))))
-
-
-// definition to support multiple BSSID
-#define BSS0 0
-#define BSS1 1
-#define BSS2 2
-#define BSS3 3
-#define BSS4 4
-#define BSS5 5
-#define BSS6 6
-#define BSS7 7
-
-
-//============================================================
-// Length definitions
-#define PEER_KEY_NO 2
-#define MAC_ADDR_LEN 6
-#define TIMESTAMP_LEN 8
-#define MAX_LEN_OF_SUPPORTED_RATES MAX_LENGTH_OF_SUPPORT_RATES // 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
-#define MAX_LEN_OF_KEY 32 // 32 octets == 256 bits, Redefine for WPA
-#define MAX_NUM_OF_CHANNELS MAX_NUM_OF_CHS // 14 channels @2.4G + 12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination
-#define MAX_NUM_OF_11JCHANNELS 20 // 14 channels @2.4G + 12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination
-#define MAX_LEN_OF_SSID 32
-#define CIPHER_TEXT_LEN 128
-#define HASH_TABLE_SIZE 256
-#define MAX_VIE_LEN 1024 // New for WPA cipher suite variable IE sizes.
-#define MAX_SUPPORT_MCS 32
-
-//============================================================
-// ASIC WCID Table definition.
-//============================================================
-#define BSSID_WCID 1 // in infra mode, always put bssid with this WCID
-#define MCAST_WCID 0x0
-#define BSS0Mcast_WCID 0x0
-#define BSS1Mcast_WCID 0xf8
-#define BSS2Mcast_WCID 0xf9
-#define BSS3Mcast_WCID 0xfa
-#define BSS4Mcast_WCID 0xfb
-#define BSS5Mcast_WCID 0xfc
-#define BSS6Mcast_WCID 0xfd
-#define BSS7Mcast_WCID 0xfe
-#define RESERVED_WCID 0xff
-
-#define MAX_NUM_OF_ACL_LIST MAX_NUMBER_OF_ACL
-
-#define MAX_LEN_OF_MAC_TABLE MAX_NUMBER_OF_MAC // if MAX_MBSSID_NUM is 8, this value can't be larger than 211
-
-#if MAX_LEN_OF_MAC_TABLE>MAX_AVAILABLE_CLIENT_WCID
-#error MAX_LEN_OF_MAC_TABLE can not be larger than MAX_AVAILABLE_CLIENT_WCID!!!!
-#endif
-
-#define MAX_NUM_OF_WDS_LINK_PERBSSID 3
-#define MAX_NUM_OF_WDS_LINK (MAX_NUM_OF_WDS_LINK_PERBSSID*MAX_MBSSID_NUM)
-#define MAX_NUM_OF_EVENT MAX_NUMBER_OF_EVENT
-#define WDS_LINK_START_WCID (MAX_LEN_OF_MAC_TABLE-1)
-
-#define NUM_OF_TID 8
-#define MAX_AID_BA 4
-#define MAX_LEN_OF_BA_REC_TABLE ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)// (NUM_OF_TID*MAX_AID_BA + 32) //Block ACK recipient
-#define MAX_LEN_OF_BA_ORI_TABLE ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)// (NUM_OF_TID*MAX_AID_BA + 32) // Block ACK originator
-#define MAX_LEN_OF_BSS_TABLE 64
-#define MAX_REORDERING_MPDU_NUM 512
-
-// key related definitions
-#define SHARE_KEY_NUM 4
-#define MAX_LEN_OF_SHARE_KEY 16 // byte count
-#define MAX_LEN_OF_PEER_KEY 16 // byte count
-#define PAIRWISE_KEY_NUM 64 // in MAC ASIC pairwise key table
-#define GROUP_KEY_NUM 4
-#define PMK_LEN 32
-#define WDS_PAIRWISE_KEY_OFFSET 60 // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table
-#define PMKID_NO 4 // Number of PMKID saved supported
-#define MAX_LEN_OF_MLME_BUFFER 2048
-
-// power status related definitions
-#define PWR_ACTIVE 0
-#define PWR_SAVE 1
-#define PWR_MMPS 2 //MIMO power save
-
-// Auth and Assoc mode related definitions
-#define AUTH_MODE_OPEN 0x00
-#define AUTH_MODE_KEY 0x01
-
-// BSS Type definitions
-#define BSS_ADHOC 0 // = Ndis802_11IBSS
-#define BSS_INFRA 1 // = Ndis802_11Infrastructure
-#define BSS_ANY 2 // = Ndis802_11AutoUnknown
-#define BSS_MONITOR 3 // = Ndis802_11Monitor
-
-
-// Reason code definitions
-#define REASON_RESERVED 0
-#define REASON_UNSPECIFY 1
-#define REASON_NO_LONGER_VALID 2
-#define REASON_DEAUTH_STA_LEAVING 3
-#define REASON_DISASSOC_INACTIVE 4
-#define REASON_DISASSPC_AP_UNABLE 5
-#define REASON_CLS2ERR 6
-#define REASON_CLS3ERR 7
-#define REASON_DISASSOC_STA_LEAVING 8
-#define REASON_STA_REQ_ASSOC_NOT_AUTH 9
-#define REASON_INVALID_IE 13
-#define REASON_MIC_FAILURE 14
-#define REASON_4_WAY_TIMEOUT 15
-#define REASON_GROUP_KEY_HS_TIMEOUT 16
-#define REASON_IE_DIFFERENT 17
-#define REASON_MCIPHER_NOT_VALID 18
-#define REASON_UCIPHER_NOT_VALID 19
-#define REASON_AKMP_NOT_VALID 20
-#define REASON_UNSUPPORT_RSNE_VER 21
-#define REASON_INVALID_RSNE_CAP 22
-#define REASON_8021X_AUTH_FAIL 23
-#define REASON_CIPHER_SUITE_REJECTED 24
-#define REASON_DECLINED 37
-
-#define REASON_QOS_UNSPECIFY 32
-#define REASON_QOS_LACK_BANDWIDTH 33
-#define REASON_POOR_CHANNEL_CONDITION 34
-#define REASON_QOS_OUTSIDE_TXOP_LIMITION 35
-#define REASON_QOS_QSTA_LEAVING_QBSS 36
-#define REASON_QOS_UNWANTED_MECHANISM 37
-#define REASON_QOS_MECH_SETUP_REQUIRED 38
-#define REASON_QOS_REQUEST_TIMEOUT 39
-#define REASON_QOS_CIPHER_NOT_SUPPORT 45
-
-// Status code definitions
-#define MLME_SUCCESS 0
-#define MLME_UNSPECIFY_FAIL 1
-#define MLME_CANNOT_SUPPORT_CAP 10
-#define MLME_REASSOC_DENY_ASSOC_EXIST 11
-#define MLME_ASSOC_DENY_OUT_SCOPE 12
-#define MLME_ALG_NOT_SUPPORT 13
-#define MLME_SEQ_NR_OUT_OF_SEQUENCE 14
-#define MLME_REJ_CHALLENGE_FAILURE 15
-#define MLME_REJ_TIMEOUT 16
-#define MLME_ASSOC_REJ_UNABLE_HANDLE_STA 17
-#define MLME_ASSOC_REJ_DATA_RATE 18
-
-#define MLME_ASSOC_REJ_NO_EXT_RATE 22
-#define MLME_ASSOC_REJ_NO_EXT_RATE_PBCC 23
-#define MLME_ASSOC_REJ_NO_CCK_OFDM 24
-
-#define MLME_QOS_UNSPECIFY 32
-#define MLME_REQUEST_DECLINED 37
-#define MLME_REQUEST_WITH_INVALID_PARAM 38
-#define MLME_DLS_NOT_ALLOW_IN_QBSS 48
-#define MLME_DEST_STA_NOT_IN_QBSS 49
-#define MLME_DEST_STA_IS_NOT_A_QSTA 50
-
-#define MLME_INVALID_FORMAT 0x51
-#define MLME_FAIL_NO_RESOURCE 0x52
-#define MLME_STATE_MACHINE_REJECT 0x53
-#define MLME_MAC_TABLE_FAIL 0x54
-
-// IE code
-#define IE_SSID 0
-#define IE_SUPP_RATES 1
-#define IE_FH_PARM 2
-#define IE_DS_PARM 3
-#define IE_CF_PARM 4
-#define IE_TIM 5
-#define IE_IBSS_PARM 6
-#define IE_COUNTRY 7 // 802.11d
-#define IE_802_11D_REQUEST 10 // 802.11d
-#define IE_QBSS_LOAD 11 // 802.11e d9
-#define IE_EDCA_PARAMETER 12 // 802.11e d9
-#define IE_TSPEC 13 // 802.11e d9
-#define IE_TCLAS 14 // 802.11e d9
-#define IE_SCHEDULE 15 // 802.11e d9
-#define IE_CHALLENGE_TEXT 16
-#define IE_POWER_CONSTRAINT 32 // 802.11h d3.3
-#define IE_POWER_CAPABILITY 33 // 802.11h d3.3
-#define IE_TPC_REQUEST 34 // 802.11h d3.3
-#define IE_TPC_REPORT 35 // 802.11h d3.3
-#define IE_SUPP_CHANNELS 36 // 802.11h d3.3
-#define IE_CHANNEL_SWITCH_ANNOUNCEMENT 37 // 802.11h d3.3
-#define IE_MEASUREMENT_REQUEST 38 // 802.11h d3.3
-#define IE_MEASUREMENT_REPORT 39 // 802.11h d3.3
-#define IE_QUIET 40 // 802.11h d3.3
-#define IE_IBSS_DFS 41 // 802.11h d3.3
-#define IE_ERP 42 // 802.11g
-#define IE_TS_DELAY 43 // 802.11e d9
-#define IE_TCLAS_PROCESSING 44 // 802.11e d9
-#define IE_QOS_CAPABILITY 46 // 802.11e d6
-#define IE_HT_CAP 45 // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD
-#define IE_AP_CHANNEL_REPORT 51 // 802.11k d6
-#define IE_HT_CAP2 52 // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD
-#define IE_RSN 48 // 802.11i d3.0
-#define IE_WPA2 48 // WPA2
-#define IE_EXT_SUPP_RATES 50 // 802.11g
-#define IE_SUPP_REG_CLASS 59 // 802.11y. Supported regulatory classes.
-#define IE_EXT_CHANNEL_SWITCH_ANNOUNCEMENT 60 // 802.11n
-#define IE_ADD_HT 61 // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD
-#define IE_ADD_HT2 53 // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD
-
-
-// For 802.11n D3.03
-//#define IE_NEW_EXT_CHA_OFFSET 62 // 802.11n d1. New extension channel offset elemet
-#define IE_SECONDARY_CH_OFFSET 62 // 802.11n D3.03 Secondary Channel Offset element
-#define IE_WAPI 68 // WAPI information element
-#define IE_2040_BSS_COEXIST 72 // 802.11n D3.0.3
-#define IE_2040_BSS_INTOLERANT_REPORT 73 // 802.11n D3.03
-#define IE_OVERLAPBSS_SCAN_PARM 74 // 802.11n D3.03
-#define IE_EXT_CAPABILITY 127 // 802.11n D3.03
-
-
-#define IE_WPA 221 // WPA
-#define IE_VENDOR_SPECIFIC 221 // Wifi WMM (WME)
-
-#define OUI_BROADCOM_HT 51 //
-#define OUI_BROADCOM_HTADD 52 //
-#define OUI_PREN_HT_CAP 51 //
-#define OUI_PREN_ADD_HT 52 //
-
-// CCX information
-#define IE_AIRONET_CKIP 133 // CCX1.0 ID 85H for CKIP
-#define IE_AP_TX_POWER 150 // CCX 2.0 for AP transmit power
-#define IE_MEASUREMENT_CAPABILITY 221 // CCX 2.0
-#define IE_CCX_V2 221
-#define IE_AIRONET_IPADDRESS 149 // CCX ID 95H for IP Address
-#define IE_AIRONET_CCKMREASSOC 156 // CCX ID 9CH for CCKM Reassociation Request element
-#define CKIP_NEGOTIATION_LENGTH 30
-#define AIRONET_IPADDRESS_LENGTH 10
-#define AIRONET_CCKMREASSOC_LENGTH 24
-
-// ========================================================
-// MLME state machine definition
-// ========================================================
-
-// STA MLME state mahcines
-#define ASSOC_STATE_MACHINE 1
-#define AUTH_STATE_MACHINE 2
-#define AUTH_RSP_STATE_MACHINE 3
-#define SYNC_STATE_MACHINE 4
-#define MLME_CNTL_STATE_MACHINE 5
-#define WPA_PSK_STATE_MACHINE 6
-#define LEAP_STATE_MACHINE 7
-#define AIRONET_STATE_MACHINE 8
-#define ACTION_STATE_MACHINE 9
-
-// AP MLME state machines
-#define AP_ASSOC_STATE_MACHINE 11
-#define AP_AUTH_STATE_MACHINE 12
-#define AP_AUTH_RSP_STATE_MACHINE 13
-#define AP_SYNC_STATE_MACHINE 14
-#define AP_CNTL_STATE_MACHINE 15
-#define AP_WPA_STATE_MACHINE 16
-
-#ifdef RT30xx
-#define WSC_STATE_MACHINE 17
-#define WSC_UPNP_STATE_MACHINE 18
-#endif
-
-//
-// STA's CONTROL/CONNECT state machine: states, events, total function #
-//
-#define CNTL_IDLE 0
-#define CNTL_WAIT_DISASSOC 1
-#define CNTL_WAIT_JOIN 2
-#define CNTL_WAIT_REASSOC 3
-#define CNTL_WAIT_START 4
-#define CNTL_WAIT_AUTH 5
-#define CNTL_WAIT_ASSOC 6
-#define CNTL_WAIT_AUTH2 7
-#define CNTL_WAIT_OID_LIST_SCAN 8
-#define CNTL_WAIT_OID_DISASSOC 9
-#ifdef RT2870
-#define CNTL_WAIT_SCAN_FOR_CONNECT 10
-#endif // RT2870 //
-
-#define MT2_ASSOC_CONF 34
-#define MT2_AUTH_CONF 35
-#define MT2_DEAUTH_CONF 36
-#define MT2_DISASSOC_CONF 37
-#define MT2_REASSOC_CONF 38
-#define MT2_PWR_MGMT_CONF 39
-#define MT2_JOIN_CONF 40
-#define MT2_SCAN_CONF 41
-#define MT2_START_CONF 42
-#define MT2_GET_CONF 43
-#define MT2_SET_CONF 44
-#define MT2_RESET_CONF 45
-#define MT2_MLME_ROAMING_REQ 52
-
-#define CNTL_FUNC_SIZE 1
-
-//
-// STA's ASSOC state machine: states, events, total function #
-//
-#define ASSOC_IDLE 0
-#define ASSOC_WAIT_RSP 1
-#define REASSOC_WAIT_RSP 2
-#define DISASSOC_WAIT_RSP 3
-#define MAX_ASSOC_STATE 4
-
-#define ASSOC_MACHINE_BASE 0
-#define MT2_MLME_ASSOC_REQ 0
-#define MT2_MLME_REASSOC_REQ 1
-#define MT2_MLME_DISASSOC_REQ 2
-#define MT2_PEER_DISASSOC_REQ 3
-#define MT2_PEER_ASSOC_REQ 4
-#define MT2_PEER_ASSOC_RSP 5
-#define MT2_PEER_REASSOC_REQ 6
-#define MT2_PEER_REASSOC_RSP 7
-#define MT2_DISASSOC_TIMEOUT 8
-#define MT2_ASSOC_TIMEOUT 9
-#define MT2_REASSOC_TIMEOUT 10
-#define MAX_ASSOC_MSG 11
-
-#define ASSOC_FUNC_SIZE (MAX_ASSOC_STATE * MAX_ASSOC_MSG)
-
-//
-// ACT state machine: states, events, total function #
-//
-#define ACT_IDLE 0
-#define MAX_ACT_STATE 1
-
-#define ACT_MACHINE_BASE 0
-
-//Those PEER_xx_CATE number is based on real Categary value in IEEE spec. Please don'es modify it by your self.
-//Category
-#define MT2_PEER_SPECTRUM_CATE 0
-#define MT2_PEER_QOS_CATE 1
-#define MT2_PEER_DLS_CATE 2
-#define MT2_PEER_BA_CATE 3
-#define MT2_PEER_PUBLIC_CATE 4
-#define MT2_PEER_RM_CATE 5
-#define MT2_PEER_HT_CATE 7 // 7.4.7
-#define MAX_PEER_CATE_MSG 7
-#define MT2_MLME_ADD_BA_CATE 8
-#define MT2_MLME_ORI_DELBA_CATE 9
-#define MT2_MLME_REC_DELBA_CATE 10
-#define MT2_MLME_QOS_CATE 11
-#define MT2_MLME_DLS_CATE 12
-#define MT2_ACT_INVALID 13
-#define MAX_ACT_MSG 14
-
-//Category field
-#define CATEGORY_SPECTRUM 0
-#define CATEGORY_QOS 1
-#define CATEGORY_DLS 2
-#define CATEGORY_BA 3
-#define CATEGORY_PUBLIC 4
-#define CATEGORY_RM 5
-#define CATEGORY_HT 7
-
-
-// DLS Action frame definition
-#define ACTION_DLS_REQUEST 0
-#define ACTION_DLS_RESPONSE 1
-#define ACTION_DLS_TEARDOWN 2
-
-//Spectrum Action field value 802.11h 7.4.1
-#define SPEC_MRQ 0 // Request
-#define SPEC_MRP 1 //Report
-#define SPEC_TPCRQ 2
-#define SPEC_TPCRP 3
-#define SPEC_CHANNEL_SWITCH 4
-
-
-//BA Action field value
-#define ADDBA_REQ 0
-#define ADDBA_RESP 1
-#define DELBA 2
-
-//Public's Action field value in Public Category. Some in 802.11y and some in 11n
-#define ACTION_BSS_2040_COEXIST 0 // 11n
-#define ACTION_DSE_ENABLEMENT 1 // 11y D9.0
-#define ACTION_DSE_DEENABLEMENT 2 // 11y D9.0
-#define ACTION_DSE_REG_LOCATION_ANNOUNCE 3 // 11y D9.0
-#define ACTION_EXT_CH_SWITCH_ANNOUNCE 4 // 11y D9.0
-#define ACTION_DSE_MEASUREMENT_REQ 5 // 11y D9.0
-#define ACTION_DSE_MEASUREMENT_REPORT 6 // 11y D9.0
-#define ACTION_MEASUREMENT_PILOT_ACTION 7 // 11y D9.0
-#define ACTION_DSE_POWER_CONSTRAINT 8 // 11y D9.0
-
-
-//HT Action field value
-#define NOTIFY_BW_ACTION 0
-#define SMPS_ACTION 1
-#define PSMP_ACTION 2
-#define SETPCO_ACTION 3
-#define MIMO_CHA_MEASURE_ACTION 4
-#define MIMO_N_BEACONFORM 5
-#define MIMO_BEACONFORM 6
-#define ANTENNA_SELECT 7
-#define HT_INFO_EXCHANGE 8
-
-#define ACT_FUNC_SIZE (MAX_ACT_STATE * MAX_ACT_MSG)
-//
-// STA's AUTHENTICATION state machine: states, evvents, total function #
-//
-#define AUTH_REQ_IDLE 0
-#define AUTH_WAIT_SEQ2 1
-#define AUTH_WAIT_SEQ4 2
-#define MAX_AUTH_STATE 3
-
-#define AUTH_MACHINE_BASE 0
-#define MT2_MLME_AUTH_REQ 0
-#define MT2_PEER_AUTH_EVEN 1
-#define MT2_AUTH_TIMEOUT 2
-#define MAX_AUTH_MSG 3
-
-#define AUTH_FUNC_SIZE (MAX_AUTH_STATE * MAX_AUTH_MSG)
-
-//
-// STA's AUTH_RSP state machine: states, events, total function #
-//
-#define AUTH_RSP_IDLE 0
-#define AUTH_RSP_WAIT_CHAL 1
-#define MAX_AUTH_RSP_STATE 2
-
-#define AUTH_RSP_MACHINE_BASE 0
-#define MT2_AUTH_CHALLENGE_TIMEOUT 0
-#define MT2_PEER_AUTH_ODD 1
-#define MT2_PEER_DEAUTH 2
-#define MAX_AUTH_RSP_MSG 3
-
-#define AUTH_RSP_FUNC_SIZE (MAX_AUTH_RSP_STATE * MAX_AUTH_RSP_MSG)
-
-//
-// STA's SYNC state machine: states, events, total function #
-//
-#define SYNC_IDLE 0 // merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state
-#define JOIN_WAIT_BEACON 1
-#define SCAN_LISTEN 2
-#define MAX_SYNC_STATE 3
-
-#define SYNC_MACHINE_BASE 0
-#define MT2_MLME_SCAN_REQ 0
-#define MT2_MLME_JOIN_REQ 1
-#define MT2_MLME_START_REQ 2
-#define MT2_PEER_BEACON 3
-#define MT2_PEER_PROBE_RSP 4
-#define MT2_PEER_ATIM 5
-#define MT2_SCAN_TIMEOUT 6
-#define MT2_BEACON_TIMEOUT 7
-#define MT2_ATIM_TIMEOUT 8
-#define MT2_PEER_PROBE_REQ 9
-#define MAX_SYNC_MSG 10
-
-#define SYNC_FUNC_SIZE (MAX_SYNC_STATE * MAX_SYNC_MSG)
-
-//Messages for the DLS state machine
-#define DLS_IDLE 0
-#define MAX_DLS_STATE 1
-
-#define DLS_MACHINE_BASE 0
-#define MT2_MLME_DLS_REQ 0
-#define MT2_PEER_DLS_REQ 1
-#define MT2_PEER_DLS_RSP 2
-#define MT2_MLME_DLS_TEAR_DOWN 3
-#define MT2_PEER_DLS_TEAR_DOWN 4
-#define MAX_DLS_MSG 5
-
-#define DLS_FUNC_SIZE (MAX_DLS_STATE * MAX_DLS_MSG)
-
-//
-// STA's WPA-PSK State machine: states, events, total function #
-//
-#define WPA_PSK_IDLE 0
-#define MAX_WPA_PSK_STATE 1
-
-#define WPA_MACHINE_BASE 0
-#define MT2_EAPPacket 0
-#define MT2_EAPOLStart 1
-#define MT2_EAPOLLogoff 2
-#define MT2_EAPOLKey 3
-#define MT2_EAPOLASFAlert 4
-#define MAX_WPA_PSK_MSG 5
-
-#define WPA_PSK_FUNC_SIZE (MAX_WPA_PSK_STATE * MAX_WPA_PSK_MSG)
-
-//
-// STA's CISCO-AIRONET State machine: states, events, total function #
-//
-#define AIRONET_IDLE 0
-#define AIRONET_SCANNING 1
-#define MAX_AIRONET_STATE 2
-
-#define AIRONET_MACHINE_BASE 0
-#define MT2_AIRONET_MSG 0
-#define MT2_AIRONET_SCAN_REQ 1
-#define MT2_AIRONET_SCAN_DONE 2
-#define MAX_AIRONET_MSG 3
-
-#define AIRONET_FUNC_SIZE (MAX_AIRONET_STATE * MAX_AIRONET_MSG)
-
-//
-// AP's CONTROL/CONNECT state machine: states, events, total function #
-//
-#define AP_CNTL_FUNC_SIZE 1
-
-//
-// AP's ASSOC state machine: states, events, total function #
-//
-#define AP_ASSOC_IDLE 0
-#define AP_MAX_ASSOC_STATE 1
-
-#define AP_ASSOC_MACHINE_BASE 0
-#define APMT2_MLME_DISASSOC_REQ 0
-#define APMT2_PEER_DISASSOC_REQ 1
-#define APMT2_PEER_ASSOC_REQ 2
-#define APMT2_PEER_REASSOC_REQ 3
-#define APMT2_CLS3ERR 4
-#define AP_MAX_ASSOC_MSG 5
-
-#define AP_ASSOC_FUNC_SIZE (AP_MAX_ASSOC_STATE * AP_MAX_ASSOC_MSG)
-
-//
-// AP's AUTHENTICATION state machine: states, events, total function #
-//
-#define AP_AUTH_REQ_IDLE 0
-#define AP_MAX_AUTH_STATE 1
-
-#define AP_AUTH_MACHINE_BASE 0
-#define APMT2_MLME_DEAUTH_REQ 0
-#define APMT2_CLS2ERR 1
-#define AP_MAX_AUTH_MSG 2
-
-#define AP_AUTH_FUNC_SIZE (AP_MAX_AUTH_STATE * AP_MAX_AUTH_MSG)
-
-//
-// AP's AUTH-RSP state machine: states, events, total function #
-//
-#define AP_AUTH_RSP_IDLE 0
-#define AP_MAX_AUTH_RSP_STATE 1
-
-#define AP_AUTH_RSP_MACHINE_BASE 0
-#define APMT2_AUTH_CHALLENGE_TIMEOUT 0
-#define APMT2_PEER_AUTH_ODD 1
-#define APMT2_PEER_DEAUTH 2
-#define AP_MAX_AUTH_RSP_MSG 3
-
-#define AP_AUTH_RSP_FUNC_SIZE (AP_MAX_AUTH_RSP_STATE * AP_MAX_AUTH_RSP_MSG)
-
-//
-// AP's SYNC state machine: states, events, total function #
-//
-#define AP_SYNC_IDLE 0
-#define AP_SCAN_LISTEN 1
-#define AP_MAX_SYNC_STATE 2
-
-#define AP_SYNC_MACHINE_BASE 0
-#define APMT2_PEER_PROBE_REQ 0
-#define APMT2_PEER_BEACON 1
-#define APMT2_MLME_SCAN_REQ 2
-#define APMT2_PEER_PROBE_RSP 3
-#define APMT2_SCAN_TIMEOUT 4
-#define APMT2_MLME_SCAN_CNCL 5
-#define AP_MAX_SYNC_MSG 6
-
-#define AP_SYNC_FUNC_SIZE (AP_MAX_SYNC_STATE * AP_MAX_SYNC_MSG)
-
-//
-// AP's WPA state machine: states, events, total function #
-//
-#define AP_WPA_PTK 0
-#define AP_MAX_WPA_PTK_STATE 1
-
-#define AP_WPA_MACHINE_BASE 0
-#define APMT2_EAPPacket 0
-#define APMT2_EAPOLStart 1
-#define APMT2_EAPOLLogoff 2
-#define APMT2_EAPOLKey 3
-#define APMT2_EAPOLASFAlert 4
-#define AP_MAX_WPA_MSG 5
-
-#define AP_WPA_FUNC_SIZE (AP_MAX_WPA_PTK_STATE * AP_MAX_WPA_MSG)
-
-// =============================================================================
-
-// value domain of 802.11 header FC.Tyte, which is b3..b2 of the 1st-byte of MAC header
-#define BTYPE_MGMT 0
-#define BTYPE_CNTL 1
-#define BTYPE_DATA 2
-
-// value domain of 802.11 MGMT frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
-#define SUBTYPE_ASSOC_REQ 0
-#define SUBTYPE_ASSOC_RSP 1
-#define SUBTYPE_REASSOC_REQ 2
-#define SUBTYPE_REASSOC_RSP 3
-#define SUBTYPE_PROBE_REQ 4
-#define SUBTYPE_PROBE_RSP 5
-#define SUBTYPE_BEACON 8
-#define SUBTYPE_ATIM 9
-#define SUBTYPE_DISASSOC 10
-#define SUBTYPE_AUTH 11
-#define SUBTYPE_DEAUTH 12
-#define SUBTYPE_ACTION 13
-#define SUBTYPE_ACTION_NO_ACK 14
-
-// value domain of 802.11 CNTL frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
-#define SUBTYPE_WRAPPER 7
-#define SUBTYPE_BLOCK_ACK_REQ 8
-#define SUBTYPE_BLOCK_ACK 9
-#define SUBTYPE_PS_POLL 10
-#define SUBTYPE_RTS 11
-#define SUBTYPE_CTS 12
-#define SUBTYPE_ACK 13
-#define SUBTYPE_CFEND 14
-#define SUBTYPE_CFEND_CFACK 15
-
-// value domain of 802.11 DATA frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
-#define SUBTYPE_DATA 0
-#define SUBTYPE_DATA_CFACK 1
-#define SUBTYPE_DATA_CFPOLL 2
-#define SUBTYPE_DATA_CFACK_CFPOLL 3
-#define SUBTYPE_NULL_FUNC 4
-#define SUBTYPE_CFACK 5
-#define SUBTYPE_CFPOLL 6
-#define SUBTYPE_CFACK_CFPOLL 7
-#define SUBTYPE_QDATA 8
-#define SUBTYPE_QDATA_CFACK 9
-#define SUBTYPE_QDATA_CFPOLL 10
-#define SUBTYPE_QDATA_CFACK_CFPOLL 11
-#define SUBTYPE_QOS_NULL 12
-#define SUBTYPE_QOS_CFACK 13
-#define SUBTYPE_QOS_CFPOLL 14
-#define SUBTYPE_QOS_CFACK_CFPOLL 15
-
-// ACK policy of QOS Control field bit 6:5
-#define NORMAL_ACK 0x00 // b6:5 = 00
-#define NO_ACK 0x20 // b6:5 = 01
-#define NO_EXPLICIT_ACK 0x40 // b6:5 = 10
-#define BLOCK_ACK 0x60 // b6:5 = 11
-
-//
-// rtmp_data.c use these definition
-//
-#define LENGTH_802_11 24
-#define LENGTH_802_11_AND_H 30
-#define LENGTH_802_11_CRC_H 34
-#define LENGTH_802_11_CRC 28
-#define LENGTH_802_11_WITH_ADDR4 30
-#define LENGTH_802_3 14
-#define LENGTH_802_3_TYPE 2
-#define LENGTH_802_1_H 8
-#define LENGTH_EAPOL_H 4
-#define LENGTH_WMMQOS_H 2
-#define LENGTH_CRC 4
-#define MAX_SEQ_NUMBER 0x0fff
-#define LENGTH_802_3_NO_TYPE 12
-#define LENGTH_802_1Q 4 /* VLAN related */
-
-// STA_CSR4.field.TxResult
-#define TX_RESULT_SUCCESS 0
-#define TX_RESULT_ZERO_LENGTH 1
-#define TX_RESULT_UNDER_RUN 2
-#define TX_RESULT_OHY_ERROR 4
-#define TX_RESULT_RETRY_FAIL 6
-
-// All PHY rate summary in TXD
-// Preamble MODE in TxD
-#define MODE_CCK 0
-#define MODE_OFDM 1
-#define MODE_HTMIX 2
-#define MODE_HTGREENFIELD 3
-
-// MCS for CCK. BW.SGI.STBC are reserved
-#define MCS_LONGP_RATE_1 0 // long preamble CCK 1Mbps
-#define MCS_LONGP_RATE_2 1 // long preamble CCK 1Mbps
-#define MCS_LONGP_RATE_5_5 2
-#define MCS_LONGP_RATE_11 3
-#define MCS_SHORTP_RATE_1 4 // long preamble CCK 1Mbps. short is forbidden in 1Mbps
-#define MCS_SHORTP_RATE_2 5 // short preamble CCK 2Mbps
-#define MCS_SHORTP_RATE_5_5 6
-#define MCS_SHORTP_RATE_11 7
-// To send duplicate legacy OFDM. set BW=BW_40. SGI.STBC are reserved
-#define MCS_RATE_6 0 // legacy OFDM
-#define MCS_RATE_9 1 // OFDM
-#define MCS_RATE_12 2 // OFDM
-#define MCS_RATE_18 3 // OFDM
-#define MCS_RATE_24 4 // OFDM
-#define MCS_RATE_36 5 // OFDM
-#define MCS_RATE_48 6 // OFDM
-#define MCS_RATE_54 7 // OFDM
-// HT
-#define MCS_0 0 // 1S
-#define MCS_1 1
-#define MCS_2 2
-#define MCS_3 3
-#define MCS_4 4
-#define MCS_5 5
-#define MCS_6 6
-#define MCS_7 7
-#define MCS_8 8 // 2S
-#define MCS_9 9
-#define MCS_10 10
-#define MCS_11 11
-#define MCS_12 12
-#define MCS_13 13
-#define MCS_14 14
-#define MCS_15 15
-#define MCS_16 16 // 3*3
-#define MCS_17 17
-#define MCS_18 18
-#define MCS_19 19
-#define MCS_20 20
-#define MCS_21 21
-#define MCS_22 22
-#define MCS_23 23
-#define MCS_32 32
-#define MCS_AUTO 33
-
-// OID_HTPHYMODE
-// MODE
-#define HTMODE_MM 0
-#define HTMODE_GF 1
-
-// Fixed Tx MODE - HT, CCK or OFDM
-#define FIXED_TXMODE_HT 0
-#define FIXED_TXMODE_CCK 1
-#define FIXED_TXMODE_OFDM 2
-// BW
-#define BW_20 BAND_WIDTH_20
-#define BW_40 BAND_WIDTH_40
-#define BW_BOTH BAND_WIDTH_BOTH
-#define BW_10 BAND_WIDTH_10 // 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field.
-
-// SHORTGI
-#define GI_400 GAP_INTERVAL_400 // only support in HT mode
-#define GI_BOTH GAP_INTERVAL_BOTH
-#define GI_800 GAP_INTERVAL_800
-// STBC
-#define STBC_NONE 0
-#define STBC_USE 1 // limited use in rt2860b phy
-#define RXSTBC_ONE 1 // rx support of one spatial stream
-#define RXSTBC_TWO 2 // rx support of 1 and 2 spatial stream
-#define RXSTBC_THR 3 // rx support of 1~3 spatial stream
-// MCS FEEDBACK
-#define MCSFBK_NONE 0 // not support mcs feedback /
-#define MCSFBK_RSV 1 // reserved
-#define MCSFBK_UNSOLICIT 2 // only support unsolict mcs feedback
-#define MCSFBK_MRQ 3 // response to both MRQ and unsolict mcs feedback
-
-// MIMO power safe
-#define MMPS_STATIC 0
-#define MMPS_DYNAMIC 1
-#define MMPS_RSV 2
-#define MMPS_ENABLE 3
-
-
-// A-MSDU size
-#define AMSDU_0 0
-#define AMSDU_1 1
-
-// MCS use 7 bits
-#define TXRATEMIMO 0x80
-#define TXRATEMCS 0x7F
-#define TXRATEOFDM 0x7F
-#define RATE_1 0
-#define RATE_2 1
-#define RATE_5_5 2
-#define RATE_11 3
-#define RATE_6 4 // OFDM
-#define RATE_9 5 // OFDM
-#define RATE_12 6 // OFDM
-#define RATE_18 7 // OFDM
-#define RATE_24 8 // OFDM
-#define RATE_36 9 // OFDM
-#define RATE_48 10 // OFDM
-#define RATE_54 11 // OFDM
-#define RATE_FIRST_OFDM_RATE RATE_6
-#define RATE_LAST_OFDM_RATE RATE_54
-#define RATE_6_5 12 // HT mix
-#define RATE_13 13 // HT mix
-#define RATE_19_5 14 // HT mix
-#define RATE_26 15 // HT mix
-#define RATE_39 16 // HT mix
-#define RATE_52 17 // HT mix
-#define RATE_58_5 18 // HT mix
-#define RATE_65 19 // HT mix
-#define RATE_78 20 // HT mix
-#define RATE_104 21 // HT mix
-#define RATE_117 22 // HT mix
-#define RATE_130 23 // HT mix
-//#define RATE_AUTO_SWITCH 255 // for StaCfg.FixedTxRate only
-#define HTRATE_0 12
-#define RATE_FIRST_MM_RATE HTRATE_0
-#define RATE_FIRST_HT_RATE HTRATE_0
-#define RATE_LAST_HT_RATE HTRATE_0
-
-// pTxWI->txop
-#define IFS_HTTXOP 0 // The txop will be handles by ASIC.
-#define IFS_PIFS 1
-#define IFS_SIFS 2
-#define IFS_BACKOFF 3
-
-// pTxD->RetryMode
-#define LONG_RETRY 1
-#define SHORT_RETRY 0
-
-// Country Region definition
-#define REGION_MINIMUM_BG_BAND 0
-#define REGION_0_BG_BAND 0 // 1-11
-#define REGION_1_BG_BAND 1 // 1-13
-#define REGION_2_BG_BAND 2 // 10-11
-#define REGION_3_BG_BAND 3 // 10-13
-#define REGION_4_BG_BAND 4 // 14
-#define REGION_5_BG_BAND 5 // 1-14
-#define REGION_6_BG_BAND 6 // 3-9
-#define REGION_7_BG_BAND 7 // 5-13
-#define REGION_31_BG_BAND 31 // 5-13
-#define REGION_MAXIMUM_BG_BAND 7
-
-#define REGION_MINIMUM_A_BAND 0
-#define REGION_0_A_BAND 0 // 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
-#define REGION_1_A_BAND 1 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
-#define REGION_2_A_BAND 2 // 36, 40, 44, 48, 52, 56, 60, 64
-#define REGION_3_A_BAND 3 // 52, 56, 60, 64, 149, 153, 157, 161
-#define REGION_4_A_BAND 4 // 149, 153, 157, 161, 165
-#define REGION_5_A_BAND 5 // 149, 153, 157, 161
-#define REGION_6_A_BAND 6 // 36, 40, 44, 48
-#define REGION_7_A_BAND 7 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
-#define REGION_8_A_BAND 8 // 52, 56, 60, 64
-#define REGION_9_A_BAND 9 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165
-#define REGION_10_A_BAND 10 // 36, 40, 44, 48, 149, 153, 157, 161, 165
-#define REGION_11_A_BAND 11 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161
-#define REGION_MAXIMUM_A_BAND 11
-
-// pTxD->CipherAlg
-#define CIPHER_NONE 0
-#define CIPHER_WEP64 1
-#define CIPHER_WEP128 2
-#define CIPHER_TKIP 3
-#define CIPHER_AES 4
-#define CIPHER_CKIP64 5
-#define CIPHER_CKIP128 6
-#define CIPHER_TKIP_NO_MIC 7 // MIC appended by driver: not a valid value in hardware key table
-#define CIPHER_SMS4 8
-
-// value domain of pAd->RfIcType
-#define RFIC_2820 1 // 2.4G 2T3R
-#define RFIC_2850 2 // 2.4G/5G 2T3R
-#define RFIC_2720 3 // 2.4G 1T2R
-#define RFIC_2750 4 // 2.4G/5G 1T2R
-#define RFIC_3020 5 // 2.4G 1T1R
-#define RFIC_2020 6 // 2.4G B/G
-#ifdef RT30xx
-#define RFIC_3021 7 // 2.4G 1T2R
-#define RFIC_3022 8 // 2.4G 2T2R
-#endif
-
-// LED Status.
-#define LED_LINK_DOWN 0
-#define LED_LINK_UP 1
-#define LED_RADIO_OFF 2
-#define LED_RADIO_ON 3
-#define LED_HALT 4
-#define LED_WPS 5
-#define LED_ON_SITE_SURVEY 6
-#define LED_POWER_UP 7
-
-// value domain of pAd->LedCntl.LedMode and E2PROM
-#define LED_MODE_DEFAULT 0
-#define LED_MODE_TWO_LED 1
-#define LED_MODE_SIGNAL_STREGTH 8 // EEPROM define =8
-
-// RC4 init value, used fro WEP & TKIP
-#define PPPINITFCS32 0xffffffff /* Initial FCS value */
-
-// value domain of pAd->StaCfg.PortSecured. 802.1X controlled port definition
-#define WPA_802_1X_PORT_SECURED 1
-#define WPA_802_1X_PORT_NOT_SECURED 2
-
-#define PAIRWISE_KEY 1
-#define GROUP_KEY 2
-
-//definition of DRS
-#define MAX_STEP_OF_TX_RATE_SWITCH 32
-
-
-// pre-allocated free NDIS PACKET/BUFFER poll for internal usage
-#define MAX_NUM_OF_FREE_NDIS_PACKET 128
-
-//Block ACK
-#define MAX_TX_REORDERBUF 64
-#define MAX_RX_REORDERBUF 64
-#define DEFAULT_TX_TIMEOUT 30
-#define DEFAULT_RX_TIMEOUT 30
-
-// definition of Recipient or Originator
-#define I_RECIPIENT TRUE
-#define I_ORIGINATOR FALSE
-
-#define DEFAULT_BBP_TX_POWER 0
-#define DEFAULT_RF_TX_POWER 5
-
-#define MAX_INI_BUFFER_SIZE 4096
-#define MAX_PARAM_BUFFER_SIZE (2048) // enough for ACL (18*64)
- //18 : the length of Mac address acceptable format "01:02:03:04:05:06;")
- //64 : MAX_NUM_OF_ACL_LIST
-// definition of pAd->OpMode
-#define OPMODE_STA 0
-#define OPMODE_AP 1
-//#define OPMODE_L3_BRG 2 // as AP and STA at the same time
-
-// ========================= AP rtmp_def.h ===========================
-// value domain for pAd->EventTab.Log[].Event
-#define EVENT_RESET_ACCESS_POINT 0 // Log = "hh:mm:ss Restart Access Point"
-#define EVENT_ASSOCIATED 1 // Log = "hh:mm:ss STA 00:01:02:03:04:05 associated"
-#define EVENT_DISASSOCIATED 2 // Log = "hh:mm:ss STA 00:01:02:03:04:05 left this BSS"
-#define EVENT_AGED_OUT 3 // Log = "hh:mm:ss STA 00:01:02:03:04:05 was aged-out and removed from this BSS"
-#define EVENT_COUNTER_M 4
-#define EVENT_INVALID_PSK 5
-#define EVENT_MAX_EVENT_TYPE 6
-// ==== end of AP rtmp_def.h ============
-
-// definition RSSI Number
-#define RSSI_0 0
-#define RSSI_1 1
-#define RSSI_2 2
-
-// definition of radar detection
-#define RD_NORMAL_MODE 0 // Not found radar signal
-#define RD_SWITCHING_MODE 1 // Found radar signal, and doing channel switch
-#define RD_SILENCE_MODE 2 // After channel switch, need to be silence a while to ensure radar not found
-
-//Driver defined cid for mapping status and command.
-#define SLEEPCID 0x11
-#define WAKECID 0x22
-#define QUERYPOWERCID 0x33
-#define OWNERMCU 0x1
-#define OWNERCPU 0x0
-
-// MBSSID definition
-#define ENTRY_NOT_FOUND 0xFF
-
-
-/* After Linux 2.6.9,
- * VLAN module use Private (from user) interface flags (netdevice->priv_flags).
- * #define IFF_802_1Q_VLAN 0x1 -- 802.1Q VLAN device. in if.h
- * ref to ip_sabotage_out() [ out->priv_flags & IFF_802_1Q_VLAN ] in br_netfilter.c
- *
- * For this reason, we MUST use EVEN value in priv_flags
- */
-#define INT_MAIN 0x0100
-#define INT_MBSSID 0x0200
-#define INT_WDS 0x0300
-#define INT_APCLI 0x0400
-#define INT_MESH 0x0500
-
-// Use bitmap to allow coexist of ATE_TXFRAME and ATE_RXFRAME(i.e.,to support LoopBack mode)
-
-// WEP Key TYPE
-#define WEP_HEXADECIMAL_TYPE 0
-#define WEP_ASCII_TYPE 1
-
-
-
-// WIRELESS EVENTS definition
-/* Max number of char in custom event, refer to wireless_tools.28/wireless.20.h */
-#define IW_CUSTOM_MAX_LEN 255 /* In bytes */
-
-// For system event - start
-#define IW_SYS_EVENT_FLAG_START 0x0200
-#define IW_ASSOC_EVENT_FLAG 0x0200
-#define IW_DISASSOC_EVENT_FLAG 0x0201
-#define IW_DEAUTH_EVENT_FLAG 0x0202
-#define IW_AGEOUT_EVENT_FLAG 0x0203
-#define IW_COUNTER_MEASURES_EVENT_FLAG 0x0204
-#define IW_REPLAY_COUNTER_DIFF_EVENT_FLAG 0x0205
-#define IW_RSNIE_DIFF_EVENT_FLAG 0x0206
-#define IW_MIC_DIFF_EVENT_FLAG 0x0207
-#define IW_ICV_ERROR_EVENT_FLAG 0x0208
-#define IW_MIC_ERROR_EVENT_FLAG 0x0209
-#define IW_GROUP_HS_TIMEOUT_EVENT_FLAG 0x020A
-#define IW_PAIRWISE_HS_TIMEOUT_EVENT_FLAG 0x020B
-#define IW_RSNIE_SANITY_FAIL_EVENT_FLAG 0x020C
-#define IW_SET_KEY_DONE_WPA1_EVENT_FLAG 0x020D
-#define IW_SET_KEY_DONE_WPA2_EVENT_FLAG 0x020E
-#define IW_STA_LINKUP_EVENT_FLAG 0x020F
-#define IW_STA_LINKDOWN_EVENT_FLAG 0x0210
-#define IW_SCAN_COMPLETED_EVENT_FLAG 0x0211
-#define IW_SCAN_ENQUEUE_FAIL_EVENT_FLAG 0x0212
-// if add new system event flag, please upadte the IW_SYS_EVENT_FLAG_END
-#define IW_SYS_EVENT_FLAG_END 0x0212
-#define IW_SYS_EVENT_TYPE_NUM (IW_SYS_EVENT_FLAG_END - IW_SYS_EVENT_FLAG_START + 1)
-// For system event - end
-
-// For spoof attack event - start
-#define IW_SPOOF_EVENT_FLAG_START 0x0300
-#define IW_CONFLICT_SSID_EVENT_FLAG 0x0300
-#define IW_SPOOF_ASSOC_RESP_EVENT_FLAG 0x0301
-#define IW_SPOOF_REASSOC_RESP_EVENT_FLAG 0x0302
-#define IW_SPOOF_PROBE_RESP_EVENT_FLAG 0x0303
-#define IW_SPOOF_BEACON_EVENT_FLAG 0x0304
-#define IW_SPOOF_DISASSOC_EVENT_FLAG 0x0305
-#define IW_SPOOF_AUTH_EVENT_FLAG 0x0306
-#define IW_SPOOF_DEAUTH_EVENT_FLAG 0x0307
-#define IW_SPOOF_UNKNOWN_MGMT_EVENT_FLAG 0x0308
-#define IW_REPLAY_ATTACK_EVENT_FLAG 0x0309
-// if add new spoof attack event flag, please upadte the IW_SPOOF_EVENT_FLAG_END
-#define IW_SPOOF_EVENT_FLAG_END 0x0309
-#define IW_SPOOF_EVENT_TYPE_NUM (IW_SPOOF_EVENT_FLAG_END - IW_SPOOF_EVENT_FLAG_START + 1)
-// For spoof attack event - end
-
-// For flooding attack event - start
-#define IW_FLOOD_EVENT_FLAG_START 0x0400
-#define IW_FLOOD_AUTH_EVENT_FLAG 0x0400
-#define IW_FLOOD_ASSOC_REQ_EVENT_FLAG 0x0401
-#define IW_FLOOD_REASSOC_REQ_EVENT_FLAG 0x0402
-#define IW_FLOOD_PROBE_REQ_EVENT_FLAG 0x0403
-#define IW_FLOOD_DISASSOC_EVENT_FLAG 0x0404
-#define IW_FLOOD_DEAUTH_EVENT_FLAG 0x0405
-#define IW_FLOOD_EAP_REQ_EVENT_FLAG 0x0406
-// if add new flooding attack event flag, please upadte the IW_FLOOD_EVENT_FLAG_END
-#define IW_FLOOD_EVENT_FLAG_END 0x0406
-#define IW_FLOOD_EVENT_TYPE_NUM (IW_FLOOD_EVENT_FLAG_END - IW_FLOOD_EVENT_FLAG_START + 1)
-// For flooding attack - end
-
-// End - WIRELESS EVENTS definition
-
-// definition for DLS, kathy
-#define MAX_NUM_OF_INIT_DLS_ENTRY 1
-#define MAX_NUM_OF_DLS_ENTRY MAX_NUMBER_OF_DLS_ENTRY
-
-//Block ACK , rt2860, kathy
-#define MAX_TX_REORDERBUF 64
-#define MAX_RX_REORDERBUF 64
-#define DEFAULT_TX_TIMEOUT 30
-#define DEFAULT_RX_TIMEOUT 30
-#define MAX_BARECI_SESSION 8
-
-#ifndef IW_ESSID_MAX_SIZE
-/* Maximum size of the ESSID and pAd->nickname strings */
-#define IW_ESSID_MAX_SIZE 32
-#endif
-
-#ifdef MCAST_RATE_SPECIFIC
-#define MCAST_DISABLE 0
-#define MCAST_CCK 1
-#define MCAST_OFDM 2
-#define MCAST_HTMIX 3
-#endif // MCAST_RATE_SPECIFIC //
-
-// For AsicRadioOff/AsicRadioOn function
-#define DOT11POWERSAVE 0
-#define GUIRADIO_OFF 1
-#define RTMP_HALT 2
-#define GUI_IDLE_POWER_SAVE 3
-// --
-
-
-// definition for WpaSupport flag
-#define WPA_SUPPLICANT_DISABLE 0
-#define WPA_SUPPLICANT_ENABLE 1
-#define WPA_SUPPLICANT_ENABLE_WITH_WEB_UI 2
-
-// Endian byte swapping codes
-#define SWAP16(x) \
- ((UINT16)( \
- (((UINT16)(x) & (UINT16) 0x00ffU) << 8) | \
- (((UINT16)(x) & (UINT16) 0xff00U) >> 8) ))
-
-#define SWAP32(x) \
- ((UINT32)( \
- (((UINT32)(x) & (UINT32) 0x000000ffUL) << 24) | \
- (((UINT32)(x) & (UINT32) 0x0000ff00UL) << 8) | \
- (((UINT32)(x) & (UINT32) 0x00ff0000UL) >> 8) | \
- (((UINT32)(x) & (UINT32) 0xff000000UL) >> 24) ))
-
-#define SWAP64(x) \
- ((UINT64)( \
- (UINT64)(((UINT64)(x) & (UINT64) 0x00000000000000ffULL) << 56) | \
- (UINT64)(((UINT64)(x) & (UINT64) 0x000000000000ff00ULL) << 40) | \
- (UINT64)(((UINT64)(x) & (UINT64) 0x0000000000ff0000ULL) << 24) | \
- (UINT64)(((UINT64)(x) & (UINT64) 0x00000000ff000000ULL) << 8) | \
- (UINT64)(((UINT64)(x) & (UINT64) 0x000000ff00000000ULL) >> 8) | \
- (UINT64)(((UINT64)(x) & (UINT64) 0x0000ff0000000000ULL) >> 24) | \
- (UINT64)(((UINT64)(x) & (UINT64) 0x00ff000000000000ULL) >> 40) | \
- (UINT64)(((UINT64)(x) & (UINT64) 0xff00000000000000ULL) >> 56) ))
-
-#define cpu2le64(x) ((UINT64)(x))
-#define le2cpu64(x) ((UINT64)(x))
-#define cpu2le32(x) ((UINT32)(x))
-#define le2cpu32(x) ((UINT32)(x))
-#define cpu2le16(x) ((UINT16)(x))
-#define le2cpu16(x) ((UINT16)(x))
-#define cpu2be64(x) SWAP64((x))
-#define be2cpu64(x) SWAP64((x))
-#define cpu2be32(x) SWAP32((x))
-#define be2cpu32(x) SWAP32((x))
-#define cpu2be16(x) SWAP16((x))
-#define be2cpu16(x) SWAP16((x))
-
-#endif // __RTMP_DEF_H__
-
-
+#include "../rt2860/rtmp_def.h"
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
-
- Module Name:
- rtmp_type.h
-
- Abstract:
-
- Revision History:
- Who When What
- -------- ---------- ----------------------------------------------
- Name Date Modification logs
- Paul Lin 1-2-2004
-*/
-#ifndef __RTMP_TYPE_H__
-#define __RTMP_TYPE_H__
-
-#define PACKED __attribute__ ((packed))
-
-// Put platform dependent declaration here
-// For example, linux type definition
-typedef unsigned char UINT8;
-typedef unsigned short UINT16;
-typedef unsigned int UINT32;
-typedef unsigned long long UINT64;
-typedef int INT32;
-typedef long long INT64;
-
-typedef unsigned char * PUINT8;
-typedef unsigned short * PUINT16;
-typedef unsigned int * PUINT32;
-typedef unsigned long long * PUINT64;
-typedef int * PINT32;
-typedef long long * PINT64;
-
-typedef signed char CHAR;
-typedef signed short SHORT;
-typedef signed int INT;
-typedef signed long LONG;
-typedef signed long long LONGLONG;
-
-
-typedef unsigned char UCHAR;
-typedef unsigned short USHORT;
-typedef unsigned int UINT;
-typedef unsigned long ULONG;
-typedef unsigned long long ULONGLONG;
-
-typedef unsigned char BOOLEAN;
-typedef void VOID;
-
-typedef VOID * PVOID;
-typedef CHAR * PCHAR;
-typedef UCHAR * PUCHAR;
-typedef USHORT * PUSHORT;
-typedef LONG * PLONG;
-typedef ULONG * PULONG;
-typedef UINT * PUINT;
-
-typedef unsigned int NDIS_MEDIA_STATE;
-
-typedef union _LARGE_INTEGER {
- struct {
- UINT LowPart;
- INT32 HighPart;
- } u;
- INT64 QuadPart;
-} LARGE_INTEGER;
-
-#endif // __RTMP_TYPE_H__
-
+#include "../rt2860/rtmp_type.h"
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
- */
-
-#ifndef __SPECTRUM_H__
-#define __SPECTRUM_H__
-
-#include "rtmp_type.h"
-#include "spectrum_def.h"
-
-typedef struct PACKED _TPC_REPORT_INFO
-{
- UINT8 TxPwr;
- UINT8 LinkMargin;
-} TPC_REPORT_INFO, *PTPC_REPORT_INFO;
-
-typedef struct PACKED _CH_SW_ANN_INFO
-{
- UINT8 ChSwMode;
- UINT8 Channel;
- UINT8 ChSwCnt;
-} CH_SW_ANN_INFO, *PCH_SW_ANN_INFO;
-
-typedef union PACKED _MEASURE_REQ_MODE
-{
- struct PACKED
- {
- UINT8 Rev0:1;
- UINT8 Enable:1;
- UINT8 Request:1;
- UINT8 Report:1;
- UINT8 Rev1:4;
- } field;
- UINT8 word;
-} MEASURE_REQ_MODE, *PMEASURE_REQ_MODE;
-
-typedef struct PACKED _MEASURE_REQ
-{
- UINT8 ChNum;
- UINT64 MeasureStartTime;
- UINT16 MeasureDuration;
-} MEASURE_REQ, *PMEASURE_REQ;
-
-typedef struct PACKED _MEASURE_REQ_INFO
-{
- UINT8 Token;
- MEASURE_REQ_MODE ReqMode;
- UINT8 ReqType;
- MEASURE_REQ MeasureReq;
-} MEASURE_REQ_INFO, *PMEASURE_REQ_INFO;
-
-typedef union PACKED _MEASURE_BASIC_REPORT_MAP
-{
- struct PACKED
- {
- UINT8 BSS:1;
- UINT8 OfdmPreamble:1;
- UINT8 UnidentifiedSignal:1;
- UINT8 Radar:1;
- UINT8 Unmeasure:1;
- UINT8 Rev:3;
- } field;
- UINT8 word;
-} MEASURE_BASIC_REPORT_MAP, *PMEASURE_BASIC_REPORT_MAP;
-
-typedef struct PACKED _MEASURE_BASIC_REPORT
-{
- UINT8 ChNum;
- UINT64 MeasureStartTime;
- UINT16 MeasureDuration;
- MEASURE_BASIC_REPORT_MAP Map;
-} MEASURE_BASIC_REPORT, *PMEASURE_BASIC_REPORT;
-
-typedef struct PACKED _MEASURE_CCA_REPORT
-{
- UINT8 ChNum;
- UINT64 MeasureStartTime;
- UINT16 MeasureDuration;
- UINT8 CCA_Busy_Fraction;
-} MEASURE_CCA_REPORT, *PMEASURE_CCA_REPORT;
-
-typedef struct PACKED _MEASURE_RPI_REPORT
-{
- UINT8 ChNum;
- UINT64 MeasureStartTime;
- UINT16 MeasureDuration;
- UINT8 RPI_Density[8];
-} MEASURE_RPI_REPORT, *PMEASURE_RPI_REPORT;
-
-typedef union PACKED _MEASURE_REPORT_MODE
-{
- struct PACKED
- {
- UINT8 Late:1;
- UINT8 Incapable:1;
- UINT8 Refused:1;
- UINT8 Rev:5;
- } field;
- UINT8 word;
-} MEASURE_REPORT_MODE, *PMEASURE_REPORT_MODE;
-
-typedef struct PACKED _MEASURE_REPORT_INFO
-{
- UINT8 Token;
- MEASURE_REPORT_MODE ReportMode;
- UINT8 ReportType;
- UINT8 Octect[0];
-} MEASURE_REPORT_INFO, *PMEASURE_REPORT_INFO;
-
-typedef struct PACKED _QUIET_INFO
-{
- UINT8 QuietCnt;
- UINT8 QuietPeriod;
- UINT8 QuietDuration;
- UINT8 QuietOffset;
-} QUIET_INFO, *PQUIET_INFO;
-
-/*
- ==========================================================================
- Description:
- Prepare Measurement request action frame and enqueue it into
- management queue waiting for transmition.
-
- Parametrs:
- 1. the destination mac address of the frame.
-
- Return : None.
- ==========================================================================
- */
-VOID EnqueueMeasurementReq(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pDA,
- IN UINT8 MeasureToken,
- IN UINT8 MeasureReqMode,
- IN UINT8 MeasureReqType,
- IN UINT8 MeasureCh,
- IN UINT16 MeasureDuration);
-
-/*
- ==========================================================================
- Description:
- Prepare Measurement report action frame and enqueue it into
- management queue waiting for transmition.
-
- Parametrs:
- 1. the destination mac address of the frame.
-
- Return : None.
- ==========================================================================
- */
-VOID EnqueueMeasurementRep(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pDA,
- IN UINT8 DialogToken,
- IN UINT8 MeasureToken,
- IN UINT8 MeasureReqMode,
- IN UINT8 MeasureReqType,
- IN UINT8 ReportInfoLen,
- IN PUINT8 pReportInfo);
-
-/*
- ==========================================================================
- Description:
- Prepare TPC Request action frame and enqueue it into
- management queue waiting for transmition.
-
- Parametrs:
- 1. the destination mac address of the frame.
-
- Return : None.
- ==========================================================================
- */
-VOID EnqueueTPCReq(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pDA,
- IN UCHAR DialogToken);
-
-/*
- ==========================================================================
- Description:
- Prepare TPC Report action frame and enqueue it into
- management queue waiting for transmition.
-
- Parametrs:
- 1. the destination mac address of the frame.
-
- Return : None.
- ==========================================================================
- */
-VOID EnqueueTPCRep(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pDA,
- IN UINT8 DialogToken,
- IN UINT8 TxPwr,
- IN UINT8 LinkMargin);
-
-/*
- ==========================================================================
- Description:
- Prepare Channel Switch Announcement action frame and enqueue it into
- management queue waiting for transmition.
-
- Parametrs:
- 1. the destination mac address of the frame.
- 2. Channel switch announcement mode.
- 2. a New selected channel.
-
- Return : None.
- ==========================================================================
- */
-VOID EnqueueChSwAnn(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pDA,
- IN UINT8 ChSwMode,
- IN UINT8 NewCh);
-
-/*
- ==========================================================================
- Description:
- Spectrun action frames Handler such as channel switch annoucement,
- measurement report, measurement request actions frames.
-
- Parametrs:
- Elme - MLME message containing the received frame
-
- Return : None.
- ==========================================================================
- */
-VOID PeerSpectrumAction(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem);
-
-/*
- ==========================================================================
- Description:
-
- Parametrs:
-
- Return : None.
- ==========================================================================
- */
-INT Set_MeasureReq_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_TpcReq_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-VOID MeasureReqTabInit(
- IN PRTMP_ADAPTER pAd);
-
-VOID MeasureReqTabExit(
- IN PRTMP_ADAPTER pAd);
-
-VOID TpcReqTabInit(
- IN PRTMP_ADAPTER pAd);
-
-VOID TpcReqTabExit(
- IN PRTMP_ADAPTER pAd);
-
-VOID NotifyChSwAnnToPeerAPs(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pRA,
- IN PUCHAR pTA,
- IN UINT8 ChSwMode,
- IN UINT8 Channel);
-#endif // __SPECTRUM_H__ //
-
+#include "../rt2860/spectrum.h"
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
-
- Module Name:
- spectrum_def.h
-
- Abstract:
- Handle association related requests either from WSTA or from local MLME
-
- Revision History:
- Who When What
- --------- ---------- ----------------------------------------------
- Fonchi Wu 2008 created for 802.11h
- */
-
-#ifndef __SPECTRUM_DEF_H__
-#define __SPECTRUM_DEF_H__
-
-#define MAX_MEASURE_REQ_TAB_SIZE 3
-#define MAX_HASH_MEASURE_REQ_TAB_SIZE MAX_MEASURE_REQ_TAB_SIZE
-
-#define MAX_TPC_REQ_TAB_SIZE 3
-#define MAX_HASH_TPC_REQ_TAB_SIZE MAX_TPC_REQ_TAB_SIZE
-
-#define MIN_RCV_PWR 100 /* Negative value ((dBm) */
-
-#define RM_TPC_REQ 0
-#define RM_MEASURE_REQ 1
-
-#define RM_BASIC 0
-#define RM_CCA 1
-#define RM_RPI_HISTOGRAM 2
-
-#define TPC_REQ_AGE_OUT 500 /* ms */
-#define MQ_REQ_AGE_OUT 500 /* ms */
-
-#define TPC_DIALOGTOKEN_HASH_INDEX(_DialogToken) ((_DialogToken) % MAX_HASH_TPC_REQ_TAB_SIZE)
-#define MQ_DIALOGTOKEN_HASH_INDEX(_DialogToken) ((_DialogToken) % MAX_MEASURE_REQ_TAB_SIZE)
-
-typedef struct _MEASURE_REQ_ENTRY
-{
- struct _MEASURE_REQ_ENTRY *pNext;
- ULONG lastTime;
- BOOLEAN Valid;
- UINT8 DialogToken;
- UINT8 MeasureDialogToken[3]; // 0:basic measure, 1: CCA measure, 2: RPI_Histogram measure.
-} MEASURE_REQ_ENTRY, *PMEASURE_REQ_ENTRY;
-
-typedef struct _MEASURE_REQ_TAB
-{
- UCHAR Size;
- PMEASURE_REQ_ENTRY Hash[MAX_HASH_MEASURE_REQ_TAB_SIZE];
- MEASURE_REQ_ENTRY Content[MAX_MEASURE_REQ_TAB_SIZE];
-} MEASURE_REQ_TAB, *PMEASURE_REQ_TAB;
-
-typedef struct _TPC_REQ_ENTRY
-{
- struct _TPC_REQ_ENTRY *pNext;
- ULONG lastTime;
- BOOLEAN Valid;
- UINT8 DialogToken;
-} TPC_REQ_ENTRY, *PTPC_REQ_ENTRY;
-
-typedef struct _TPC_REQ_TAB
-{
- UCHAR Size;
- PTPC_REQ_ENTRY Hash[MAX_HASH_TPC_REQ_TAB_SIZE];
- TPC_REQ_ENTRY Content[MAX_TPC_REQ_TAB_SIZE];
-} TPC_REQ_TAB, *PTPC_REQ_TAB;
-
-#endif // __SPECTRUM_DEF_H__ //
-
+#include "../rt2860/spectrum_def.h"
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
-
- Module Name:
- sta_ioctl.c
-
- Abstract:
- IOCTL related subroutines
-
- Revision History:
- Who When What
- -------- ---------- ----------------------------------------------
- Rory Chen 01-03-2003 created
- Rory Chen 02-14-2005 modify to support RT61
-*/
-
-#include "rt_config.h"
-
-#ifdef DBG
-extern ULONG RTDebugLevel;
-#endif
-
-#define NR_WEP_KEYS 4
-#define WEP_SMALL_KEY_LEN (40/8)
-#define WEP_LARGE_KEY_LEN (104/8)
-
-#define GROUP_KEY_NO 4
-
-extern UCHAR CipherWpa2Template[];
-extern UCHAR CipherWpaPskTkip[];
-extern UCHAR CipherWpaPskTkipLen;
-
-typedef struct PACKED _RT_VERSION_INFO{
- UCHAR DriverVersionW;
- UCHAR DriverVersionX;
- UCHAR DriverVersionY;
- UCHAR DriverVersionZ;
- UINT DriverBuildYear;
- UINT DriverBuildMonth;
- UINT DriverBuildDay;
-} RT_VERSION_INFO, *PRT_VERSION_INFO;
-
-struct iw_priv_args privtab[] = {
-{ RTPRIV_IOCTL_SET,
- IW_PRIV_TYPE_CHAR | 1024, 0,
- "set"},
-
-{ RTPRIV_IOCTL_SHOW, 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
- ""},
-{ RTPRIV_IOCTL_SHOW, IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
- ""},
-/* --- sub-ioctls definitions --- */
- { SHOW_CONN_STATUS,
- 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "connStatus" },
- { SHOW_DRVIER_VERION,
- 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "driverVer" },
- { SHOW_BA_INFO,
- 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "bainfo" },
- { SHOW_DESC_INFO,
- 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "descinfo" },
- { RAIO_OFF,
- 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "radio_off" },
- { RAIO_ON,
- 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "radio_on" },
- { SHOW_CFG_VALUE,
- IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "show" },
-#ifndef RT30xx
- { SHOW_ADHOC_ENTRY_INFO,
- 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "adhocEntry" },
-#endif
-/* --- sub-ioctls relations --- */
-
-#ifdef DBG
-{ RTPRIV_IOCTL_BBP,
- IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
- "bbp"},
-{ RTPRIV_IOCTL_MAC,
- IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | 1024,
- "mac"},
-#ifdef RT30xx
-{ RTPRIV_IOCTL_RF,
- IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
- "rf"},
-#endif // RT30xx //
-{ RTPRIV_IOCTL_E2P,
- IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | 1024,
- "e2p"},
-#endif /* DBG */
-
-{ RTPRIV_IOCTL_STATISTICS,
- 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
- "stat"},
-{ RTPRIV_IOCTL_GSITESURVEY,
- 0, IW_PRIV_TYPE_CHAR | 1024,
- "get_site_survey"},
-};
-
-INT Set_SSID_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg);
-
-#ifdef WMM_SUPPORT
-INT Set_WmmCapable_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-#endif
-
-INT Set_NetworkType_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg);
-
-INT Set_AuthMode_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg);
-
-INT Set_EncrypType_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg);
-
-INT Set_DefaultKeyID_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg);
-
-INT Set_Key1_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg);
-
-INT Set_Key2_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg);
-
-INT Set_Key3_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg);
-
-INT Set_Key4_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg);
-
-INT Set_WPAPSK_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg);
-
-
-INT Set_PSMode_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg);
-
-INT Set_Wpa_Support(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-#ifdef DBG
-#ifndef RT30xx
-VOID RTMPIoctlBBP(
- IN PRTMP_ADAPTER pAdapter,
- IN struct iwreq *wrq);
-#endif
-
-VOID RTMPIoctlMAC(
- IN PRTMP_ADAPTER pAdapter,
- IN struct iwreq *wrq);
-
-VOID RTMPIoctlE2PROM(
- IN PRTMP_ADAPTER pAdapter,
- IN struct iwreq *wrq);
-
-#ifdef RT30xx
-VOID RTMPIoctlRF(
- IN PRTMP_ADAPTER pAdapter,
- IN struct iwreq *wrq);
-#endif // RT30xx //
-#endif // DBG //
-
-
-NDIS_STATUS RTMPWPANoneAddKeyProc(
- IN PRTMP_ADAPTER pAd,
- IN PVOID pBuf);
-
-INT Set_FragTest_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg);
-
-INT Set_TGnWifiTest_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg);
-
-INT Set_LongRetryLimit_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg);
-
-INT Set_ShortRetryLimit_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg);
-
-#ifndef RT30xx
-INT Show_Adhoc_MacTable_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PCHAR extra);
-#endif
-
-static struct {
- CHAR *name;
- INT (*set_proc)(PRTMP_ADAPTER pAdapter, PUCHAR arg);
-} *PRTMP_PRIVATE_SET_PROC, RTMP_PRIVATE_SUPPORT_PROC[] = {
- {"DriverVersion", Set_DriverVersion_Proc},
- {"CountryRegion", Set_CountryRegion_Proc},
- {"CountryRegionABand", Set_CountryRegionABand_Proc},
- {"SSID", Set_SSID_Proc},
- {"WirelessMode", Set_WirelessMode_Proc},
- {"TxBurst", Set_TxBurst_Proc},
- {"TxPreamble", Set_TxPreamble_Proc},
- {"TxPower", Set_TxPower_Proc},
- {"Channel", Set_Channel_Proc},
- {"BGProtection", Set_BGProtection_Proc},
- {"RTSThreshold", Set_RTSThreshold_Proc},
- {"FragThreshold", Set_FragThreshold_Proc},
- {"HtBw", Set_HtBw_Proc},
- {"HtMcs", Set_HtMcs_Proc},
- {"HtGi", Set_HtGi_Proc},
- {"HtOpMode", Set_HtOpMode_Proc},
- {"HtExtcha", Set_HtExtcha_Proc},
- {"HtMpduDensity", Set_HtMpduDensity_Proc},
- {"HtBaWinSize", Set_HtBaWinSize_Proc},
- {"HtRdg", Set_HtRdg_Proc},
- {"HtAmsdu", Set_HtAmsdu_Proc},
- {"HtAutoBa", Set_HtAutoBa_Proc},
- {"HtBaDecline", Set_BADecline_Proc},
- {"HtProtect", Set_HtProtect_Proc},
- {"HtMimoPs", Set_HtMimoPs_Proc},
-#ifdef AGGREGATION_SUPPORT
- {"PktAggregate", Set_PktAggregate_Proc},
-#endif
-
-#ifdef WMM_SUPPORT
- {"WmmCapable", Set_WmmCapable_Proc},
-#endif
- {"IEEE80211H", Set_IEEE80211H_Proc},
- {"NetworkType", Set_NetworkType_Proc},
- {"AuthMode", Set_AuthMode_Proc},
- {"EncrypType", Set_EncrypType_Proc},
- {"DefaultKeyID", Set_DefaultKeyID_Proc},
- {"Key1", Set_Key1_Proc},
- {"Key2", Set_Key2_Proc},
- {"Key3", Set_Key3_Proc},
- {"Key4", Set_Key4_Proc},
- {"WPAPSK", Set_WPAPSK_Proc},
- {"ResetCounter", Set_ResetStatCounter_Proc},
- {"PSMode", Set_PSMode_Proc},
-#ifdef DBG
- {"Debug", Set_Debug_Proc},
-#endif
- {"WpaSupport", Set_Wpa_Support},
- {"FixedTxMode", Set_FixedTxMode_Proc},
- {"TGnWifiTest", Set_TGnWifiTest_Proc},
- {"ForceGF", Set_ForceGF_Proc},
- {"LongRetry", Set_LongRetryLimit_Proc},
- {"ShortRetry", Set_ShortRetryLimit_Proc},
-//2008/09/11:KH add to support efuse<--
-#ifdef RT30xx
- {"efuseFreeNumber", set_eFuseGetFreeBlockCount_Proc},
- {"efuseDump", set_eFusedump_Proc},
- {"efuseLoadFromBin", set_eFuseLoadFromBin_Proc},
-#endif // RT30xx //
-//2008/09/11:KH add to support efuse-->
- {NULL,}
-};
-
-
-VOID RTMPAddKey(
- IN PRTMP_ADAPTER pAd,
- IN PNDIS_802_11_KEY pKey)
-{
- ULONG KeyIdx;
- MAC_TABLE_ENTRY *pEntry;
-
- DBGPRINT(RT_DEBUG_TRACE, ("RTMPAddKey ------>\n"));
-
- if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
- {
- if (pKey->KeyIndex & 0x80000000)
- {
- if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
- {
- NdisZeroMemory(pAd->StaCfg.PMK, 32);
- NdisMoveMemory(pAd->StaCfg.PMK, pKey->KeyMaterial, pKey->KeyLength);
- goto end;
- }
- // Update PTK
- NdisZeroMemory(&pAd->SharedKey[BSS0][0], sizeof(CIPHER_KEY));
- pAd->SharedKey[BSS0][0].KeyLen = LEN_TKIP_EK;
- NdisMoveMemory(pAd->SharedKey[BSS0][0].Key, pKey->KeyMaterial, LEN_TKIP_EK);
-
- if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled)
- {
- NdisMoveMemory(pAd->SharedKey[BSS0][0].RxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK);
- NdisMoveMemory(pAd->SharedKey[BSS0][0].TxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
- }
- else
- {
- NdisMoveMemory(pAd->SharedKey[BSS0][0].TxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK);
- NdisMoveMemory(pAd->SharedKey[BSS0][0].RxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
- }
-
- // Decide its ChiperAlg
- if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled)
- pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_TKIP;
- else if (pAd->StaCfg.PairCipher == Ndis802_11Encryption3Enabled)
- pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_AES;
- else
- pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_NONE;
-
- // Update these related information to MAC_TABLE_ENTRY
- pEntry = &pAd->MacTab.Content[BSSID_WCID];
- NdisMoveMemory(pEntry->PairwiseKey.Key, pAd->SharedKey[BSS0][0].Key, LEN_TKIP_EK);
- NdisMoveMemory(pEntry->PairwiseKey.RxMic, pAd->SharedKey[BSS0][0].RxMic, LEN_TKIP_RXMICK);
- NdisMoveMemory(pEntry->PairwiseKey.TxMic, pAd->SharedKey[BSS0][0].TxMic, LEN_TKIP_TXMICK);
- pEntry->PairwiseKey.CipherAlg = pAd->SharedKey[BSS0][0].CipherAlg;
-
- // Update pairwise key information to ASIC Shared Key Table
- AsicAddSharedKeyEntry(pAd,
- BSS0,
- 0,
- pAd->SharedKey[BSS0][0].CipherAlg,
- pAd->SharedKey[BSS0][0].Key,
- pAd->SharedKey[BSS0][0].TxMic,
- pAd->SharedKey[BSS0][0].RxMic);
-
- // Update ASIC WCID attribute table and IVEIV table
- RTMPAddWcidAttributeEntry(pAd,
- BSS0,
- 0,
- pAd->SharedKey[BSS0][0].CipherAlg,
- pEntry);
-
- if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA2)
- {
- // set 802.1x port control
- STA_PORT_SECURED(pAd);
-
- // Indicate Connected for GUI
- pAd->IndicateMediaState = NdisMediaStateConnected;
- }
- }
- else
- {
- // Update GTK
- pAd->StaCfg.DefaultKeyId = (pKey->KeyIndex & 0xFF);
- NdisZeroMemory(&pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId], sizeof(CIPHER_KEY));
- pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].KeyLen = LEN_TKIP_EK;
- NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key, pKey->KeyMaterial, LEN_TKIP_EK);
-
- if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption2Enabled)
- {
- NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK);
- NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
- }
- else
- {
- NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK);
- NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
- }
-
- // Update Shared Key CipherAlg
- pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_NONE;
- if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption2Enabled)
- pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_TKIP;
- else if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled)
- pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_AES;
-
- // Update group key information to ASIC Shared Key Table
- AsicAddSharedKeyEntry(pAd,
- BSS0,
- pAd->StaCfg.DefaultKeyId,
- pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg,
- pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key,
- pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic,
- pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic);
-
- // Update ASIC WCID attribute table and IVEIV table
- RTMPAddWcidAttributeEntry(pAd,
- BSS0,
- pAd->StaCfg.DefaultKeyId,
- pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg,
- NULL);
-
- // set 802.1x port control
- STA_PORT_SECURED(pAd);
-
- // Indicate Connected for GUI
- pAd->IndicateMediaState = NdisMediaStateConnected;
- }
- }
- else // dynamic WEP from wpa_supplicant
- {
- UCHAR CipherAlg;
- PUCHAR Key;
-
- if(pKey->KeyLength == 32)
- goto end;
-
- KeyIdx = pKey->KeyIndex & 0x0fffffff;
-
- if (KeyIdx < 4)
- {
- // it is a default shared key, for Pairwise key setting
- if (pKey->KeyIndex & 0x80000000)
- {
- pEntry = MacTableLookup(pAd, pKey->BSSID);
-
- if (pEntry)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("RTMPAddKey: Set Pair-wise Key\n"));
-
- // set key material and key length
- pEntry->PairwiseKey.KeyLen = (UCHAR)pKey->KeyLength;
- NdisMoveMemory(pEntry->PairwiseKey.Key, &pKey->KeyMaterial, pKey->KeyLength);
-
- // set Cipher type
- if (pKey->KeyLength == 5)
- pEntry->PairwiseKey.CipherAlg = CIPHER_WEP64;
- else
- pEntry->PairwiseKey.CipherAlg = CIPHER_WEP128;
-
- // Add Pair-wise key to Asic
- AsicAddPairwiseKeyEntry(
- pAd,
- pEntry->Addr,
- (UCHAR)pEntry->Aid,
- &pEntry->PairwiseKey);
-
- // update WCID attribute table and IVEIV table for this entry
- RTMPAddWcidAttributeEntry(
- pAd,
- BSS0,
- KeyIdx, // The value may be not zero
- pEntry->PairwiseKey.CipherAlg,
- pEntry);
-
- }
- }
- else
- {
- // Default key for tx (shared key)
- pAd->StaCfg.DefaultKeyId = (UCHAR) KeyIdx;
-
- // set key material and key length
- pAd->SharedKey[BSS0][KeyIdx].KeyLen = (UCHAR) pKey->KeyLength;
- NdisMoveMemory(pAd->SharedKey[BSS0][KeyIdx].Key, &pKey->KeyMaterial, pKey->KeyLength);
-
- // Set Ciper type
- if (pKey->KeyLength == 5)
- pAd->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_WEP64;
- else
- pAd->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_WEP128;
-
- CipherAlg = pAd->SharedKey[BSS0][KeyIdx].CipherAlg;
- Key = pAd->SharedKey[BSS0][KeyIdx].Key;
-
- // Set Group key material to Asic
- AsicAddSharedKeyEntry(pAd, BSS0, KeyIdx, CipherAlg, Key, NULL, NULL);
-
- // Update WCID attribute table and IVEIV table for this group key table
- RTMPAddWcidAttributeEntry(pAd, BSS0, KeyIdx, CipherAlg, NULL);
-
- }
- }
- }
-end:
- return;
-}
-
-char * rtstrchr(const char * s, int c)
-{
- for(; *s != (char) c; ++s)
- if (*s == '\0')
- return NULL;
- return (char *) s;
-}
-
-/*
-This is required for LinEX2004/kernel2.6.7 to provide iwlist scanning function
-*/
-
-int
-rt_ioctl_giwname(struct net_device *dev,
- struct iw_request_info *info,
- char *name, char *extra)
-{
-// PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
-#ifdef RT2870
- strncpy(name, "RT2870 Wireless", IFNAMSIZ);
-#endif // RT2870 //
- return 0;
-}
-
-int rt_ioctl_siwfreq(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_freq *freq, char *extra)
-{
- PRTMP_ADAPTER pAdapter = dev->ml_priv;
- int chan = -1;
-
- //check if the interface is down
- if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
- return -ENETDOWN;
- }
-
-
- if (freq->e > 1)
- return -EINVAL;
-
- if((freq->e == 0) && (freq->m <= 1000))
- chan = freq->m; // Setting by channel number
- else
- MAP_KHZ_TO_CHANNEL_ID( (freq->m /100) , chan); // Setting by frequency - search the table , like 2.412G, 2.422G,
-
- if (ChannelSanity(pAdapter, chan) == TRUE)
- {
- pAdapter->CommonCfg.Channel = chan;
- DBGPRINT(RT_DEBUG_ERROR, ("==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x%x] (Channel=%d)\n", SIOCSIWFREQ, pAdapter->CommonCfg.Channel));
- }
- else
- return -EINVAL;
-
- return 0;
-}
-int rt_ioctl_giwfreq(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_freq *freq, char *extra)
-{
- VIRTUAL_ADAPTER *pVirtualAd = NULL;
-#ifndef RT30xx
- PRTMP_ADAPTER pAdapter = NULL;
-#endif
-#ifdef RT30xx
- PRTMP_ADAPTER pAdapter;
-#endif
- UCHAR ch;
- ULONG m;
-
- if (dev->priv_flags == INT_MAIN)
- {
- pAdapter = dev->ml_priv;
- }
- else
- {
- pVirtualAd = dev->ml_priv;
-#ifndef RT30xx
- if (pVirtualAd && pVirtualAd->RtmpDev)
-#endif
- pAdapter = pVirtualAd->RtmpDev->ml_priv;
- }
-
- if (pAdapter == NULL)
- {
- /* if 1st open fail, pAd will be free;
- So the net_dev->ml_priv will be NULL in 2rd open */
- return -ENETDOWN;
- }
-
- ch = pAdapter->CommonCfg.Channel;
-
- DBGPRINT(RT_DEBUG_TRACE,("==>rt_ioctl_giwfreq %d\n", ch));
-
- MAP_CHANNEL_ID_TO_KHZ(ch, m);
- freq->m = m * 100;
- freq->e = 1;
- return 0;
-}
-
-int rt_ioctl_siwmode(struct net_device *dev,
- struct iw_request_info *info,
- __u32 *mode, char *extra)
-{
- PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
- //check if the interface is down
- if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
- return -ENETDOWN;
- }
-
- switch (*mode)
- {
- case IW_MODE_ADHOC:
- Set_NetworkType_Proc(pAdapter, "Adhoc");
- break;
- case IW_MODE_INFRA:
- Set_NetworkType_Proc(pAdapter, "Infra");
- break;
- case IW_MODE_MONITOR:
- Set_NetworkType_Proc(pAdapter, "Monitor");
- break;
- default:
- DBGPRINT(RT_DEBUG_TRACE, ("===>rt_ioctl_siwmode::SIOCSIWMODE (unknown %d)\n", *mode));
- return -EINVAL;
- }
-
- // Reset Ralink supplicant to not use, it will be set to start when UI set PMK key
- pAdapter->StaCfg.WpaState = SS_NOTUSE;
-
- return 0;
-}
-
-int rt_ioctl_giwmode(struct net_device *dev,
- struct iw_request_info *info,
- __u32 *mode, char *extra)
-{
-#ifndef RT30xx
- PRTMP_ADAPTER pAdapter = NULL;
- VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
- if (dev->priv_flags == INT_MAIN)
- {
- pAdapter = dev->ml_priv;
- }
- else
- {
- pVirtualAd = dev->ml_priv;
- if (pVirtualAd && pVirtualAd->RtmpDev)
- pAdapter = pVirtualAd->RtmpDev->ml_priv;
- }
-
- if (pAdapter == NULL)
- {
- /* if 1st open fail, pAd will be free;
- So the net_dev->ml_priv will be NULL in 2rd open */
- return -ENETDOWN;
- }
-#endif
-#ifdef RT30xx
- PRTMP_ADAPTER pAdapter = dev->ml_priv;
-#endif
-
- if (ADHOC_ON(pAdapter))
- *mode = IW_MODE_ADHOC;
- else if (INFRA_ON(pAdapter))
- *mode = IW_MODE_INFRA;
- else if (MONITOR_ON(pAdapter))
- {
- *mode = IW_MODE_MONITOR;
- }
- else
- *mode = IW_MODE_AUTO;
-
- DBGPRINT(RT_DEBUG_TRACE, ("==>rt_ioctl_giwmode(mode=%d)\n", *mode));
- return 0;
-}
-
-int rt_ioctl_siwsens(struct net_device *dev,
- struct iw_request_info *info,
- char *name, char *extra)
-{
- PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
- //check if the interface is down
- if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
- return -ENETDOWN;
- }
-
- return 0;
-}
-
-int rt_ioctl_giwsens(struct net_device *dev,
- struct iw_request_info *info,
- char *name, char *extra)
-{
- return 0;
-}
-
-int rt_ioctl_giwrange(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *data, char *extra)
-{
-#ifndef RT30xx
- PRTMP_ADAPTER pAdapter = NULL;
- VIRTUAL_ADAPTER *pVirtualAd = NULL;
-#endif
-#ifdef RT30xx
- PRTMP_ADAPTER pAdapter = dev->ml_priv;
-#endif
- struct iw_range *range = (struct iw_range *) extra;
- u16 val;
- int i;
-
-#ifndef RT30xx
- if (dev->priv_flags == INT_MAIN)
- {
- pAdapter = dev->ml_priv;
- }
- else
- {
- pVirtualAd = dev->ml_priv;
- if (pVirtualAd && pVirtualAd->RtmpDev)
- pAdapter = pVirtualAd->RtmpDev->ml_priv;
- }
-
- if (pAdapter == NULL)
- {
- /* if 1st open fail, pAd will be free;
- So the net_dev->ml_priv will be NULL in 2rd open */
- return -ENETDOWN;
- }
-#endif
-
- DBGPRINT(RT_DEBUG_TRACE ,("===>rt_ioctl_giwrange\n"));
- data->length = sizeof(struct iw_range);
- memset(range, 0, sizeof(struct iw_range));
-
- range->txpower_capa = IW_TXPOW_DBM;
-
- if (INFRA_ON(pAdapter)||ADHOC_ON(pAdapter))
- {
- range->min_pmp = 1 * 1024;
- range->max_pmp = 65535 * 1024;
- range->min_pmt = 1 * 1024;
- range->max_pmt = 1000 * 1024;
- range->pmp_flags = IW_POWER_PERIOD;
- range->pmt_flags = IW_POWER_TIMEOUT;
- range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT |
- IW_POWER_UNICAST_R | IW_POWER_ALL_R;
- }
-
- range->we_version_compiled = WIRELESS_EXT;
- range->we_version_source = 14;
-
- range->retry_capa = IW_RETRY_LIMIT;
- range->retry_flags = IW_RETRY_LIMIT;
- range->min_retry = 0;
- range->max_retry = 255;
-
- range->num_channels = pAdapter->ChannelListNum;
-
- val = 0;
- for (i = 1; i <= range->num_channels; i++)
- {
- u32 m;
- range->freq[val].i = pAdapter->ChannelList[i-1].Channel;
- MAP_CHANNEL_ID_TO_KHZ(pAdapter->ChannelList[i-1].Channel, m);
- range->freq[val].m = m * 100; /* HZ */
-
- range->freq[val].e = 1;
- val++;
- if (val == IW_MAX_FREQUENCIES)
- break;
- }
- range->num_frequency = val;
-
- range->max_qual.qual = 100; /* what is correct max? This was not
- * documented exactly. At least
- * 69 has been observed. */
- range->max_qual.level = 0; /* dB */
- range->max_qual.noise = 0; /* dB */
-
- /* What would be suitable values for "average/typical" qual? */
- range->avg_qual.qual = 20;
- range->avg_qual.level = -60;
- range->avg_qual.noise = -95;
- range->sensitivity = 3;
-
- range->max_encoding_tokens = NR_WEP_KEYS;
- range->num_encoding_sizes = 2;
- range->encoding_size[0] = 5;
- range->encoding_size[1] = 13;
-
- range->min_rts = 0;
- range->max_rts = 2347;
- range->min_frag = 256;
- range->max_frag = 2346;
-
-#if WIRELESS_EXT > 17
- /* IW_ENC_CAPA_* bit field */
- range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
- IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP;
-#endif
-
- return 0;
-}
-
-int rt_ioctl_siwap(struct net_device *dev,
- struct iw_request_info *info,
- struct sockaddr *ap_addr, char *extra)
-{
- PRTMP_ADAPTER pAdapter = dev->ml_priv;
- NDIS_802_11_MAC_ADDRESS Bssid;
-
- //check if the interface is down
- if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
- return -ENETDOWN;
- }
-
- if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
- {
- RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
- DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
- }
-
- // tell CNTL state machine to call NdisMSetInformationComplete() after completing
- // this request, because this request is initiated by NDIS.
- pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE;
- // Prevent to connect AP again in STAMlmePeriodicExec
- pAdapter->MlmeAux.AutoReconnectSsidLen= 32;
-
- memset(Bssid, 0, MAC_ADDR_LEN);
- memcpy(Bssid, ap_addr->sa_data, MAC_ADDR_LEN);
- MlmeEnqueue(pAdapter,
- MLME_CNTL_STATE_MACHINE,
- OID_802_11_BSSID,
- sizeof(NDIS_802_11_MAC_ADDRESS),
- (VOID *)&Bssid);
-
- DBGPRINT(RT_DEBUG_TRACE, ("IOCTL::SIOCSIWAP %02x:%02x:%02x:%02x:%02x:%02x\n",
- Bssid[0], Bssid[1], Bssid[2], Bssid[3], Bssid[4], Bssid[5]));
-
- return 0;
-}
-
-int rt_ioctl_giwap(struct net_device *dev,
- struct iw_request_info *info,
- struct sockaddr *ap_addr, char *extra)
-{
-#ifndef RT30xx
- PRTMP_ADAPTER pAdapter = NULL;
- VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
- if (dev->priv_flags == INT_MAIN)
- {
- pAdapter = dev->ml_priv;
- }
- else
- {
- pVirtualAd = dev->ml_priv;
- if (pVirtualAd && pVirtualAd->RtmpDev)
- pAdapter = pVirtualAd->RtmpDev->ml_priv;
- }
-
- if (pAdapter == NULL)
- {
- /* if 1st open fail, pAd will be free;
- So the net_dev->ml_priv will be NULL in 2rd open */
- return -ENETDOWN;
- }
-#endif
-#ifdef RT30xx
- PRTMP_ADAPTER pAdapter = dev->ml_priv;
-#endif
-
- if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter))
- {
- ap_addr->sa_family = ARPHRD_ETHER;
- memcpy(ap_addr->sa_data, &pAdapter->CommonCfg.Bssid, ETH_ALEN);
- }
- // Add for RT2870
- else if (pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
- {
- ap_addr->sa_family = ARPHRD_ETHER;
- memcpy(ap_addr->sa_data, &pAdapter->MlmeAux.Bssid, ETH_ALEN);
- }
- else
- {
- DBGPRINT(RT_DEBUG_TRACE, ("IOCTL::SIOCGIWAP(=EMPTY)\n"));
- return -ENOTCONN;
- }
-
- return 0;
-}
-
-/*
- * Units are in db above the noise floor. That means the
- * rssi values reported in the tx/rx descriptors in the
- * driver are the SNR expressed in db.
- *
- * If you assume that the noise floor is -95, which is an
- * excellent assumption 99.5 % of the time, then you can
- * derive the absolute signal level (i.e. -95 + rssi).
- * There are some other slight factors to take into account
- * depending on whether the rssi measurement is from 11b,
- * 11g, or 11a. These differences are at most 2db and
- * can be documented.
- *
- * NB: various calculations are based on the orinoco/wavelan
- * drivers for compatibility
- */
-static void set_quality(PRTMP_ADAPTER pAdapter,
- struct iw_quality *iq,
- signed char rssi)
-{
- __u8 ChannelQuality;
-
- // Normalize Rssi
- if (rssi >= -50)
- ChannelQuality = 100;
- else if (rssi >= -80) // between -50 ~ -80dbm
- ChannelQuality = (__u8)(24 + ((rssi + 80) * 26)/10);
- else if (rssi >= -90) // between -80 ~ -90dbm
- ChannelQuality = (__u8)((rssi + 90) * 26)/10;
- else
- ChannelQuality = 0;
-
- iq->qual = (__u8)ChannelQuality;
-
- iq->level = (__u8)(rssi);
- iq->noise = (pAdapter->BbpWriteLatch[66] > pAdapter->BbpTuning.FalseCcaUpperThreshold) ? ((__u8)pAdapter->BbpTuning.FalseCcaUpperThreshold) : ((__u8) pAdapter->BbpWriteLatch[66]); // noise level (dBm)
- iq->noise += 256 - 143;
- iq->updated = pAdapter->iw_stats.qual.updated;
-}
-
-int rt_ioctl_iwaplist(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *data, char *extra)
-{
- PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
- struct sockaddr addr[IW_MAX_AP];
- struct iw_quality qual[IW_MAX_AP];
- int i;
-
- //check if the interface is down
- if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
- data->length = 0;
- return 0;
- //return -ENETDOWN;
- }
-
- for (i = 0; i <IW_MAX_AP ; i++)
- {
- if (i >= pAdapter->ScanTab.BssNr)
- break;
- addr[i].sa_family = ARPHRD_ETHER;
- memcpy(addr[i].sa_data, &pAdapter->ScanTab.BssEntry[i].Bssid, MAC_ADDR_LEN);
- set_quality(pAdapter, &qual[i], pAdapter->ScanTab.BssEntry[i].Rssi);
- }
- data->length = i;
- memcpy(extra, &addr, i*sizeof(addr[0]));
- data->flags = 1; /* signal quality present (sort of) */
- memcpy(extra + i*sizeof(addr[0]), &qual, i*sizeof(qual[i]));
-
- return 0;
-}
-
-#ifdef SIOCGIWSCAN
-int rt_ioctl_siwscan(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *data, char *extra)
-{
- PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
- ULONG Now;
- int Status = NDIS_STATUS_SUCCESS;
-
- //check if the interface is down
- if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
- return -ENETDOWN;
- }
-
- if (MONITOR_ON(pAdapter))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("!!! Driver is in Monitor Mode now !!!\n"));
- return -EINVAL;
- }
-
-
- if (pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE)
- {
- pAdapter->StaCfg.WpaSupplicantScanCount++;
- }
-
- pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
- if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
- return 0;
- do{
- Now = jiffies;
-
- if ((pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE) &&
- (pAdapter->StaCfg.WpaSupplicantScanCount > 3))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("!!! WpaSupplicantScanCount > 3\n"));
- Status = NDIS_STATUS_SUCCESS;
- break;
- }
-
- if ((OPSTATUS_TEST_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED)) &&
- ((pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
- (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK)) &&
- (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("!!! Link UP, Port Not Secured! ignore this set::OID_802_11_BSSID_LIST_SCAN\n"));
- Status = NDIS_STATUS_SUCCESS;
- break;
- }
-
- if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
- {
- RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
- DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
- }
-
- // tell CNTL state machine to call NdisMSetInformationComplete() after completing
- // this request, because this request is initiated by NDIS.
- pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE;
- // Reset allowed scan retries
- pAdapter->StaCfg.ScanCnt = 0;
- pAdapter->StaCfg.LastScanTime = Now;
-
- MlmeEnqueue(pAdapter,
- MLME_CNTL_STATE_MACHINE,
- OID_802_11_BSSID_LIST_SCAN,
- 0,
- NULL);
-
- Status = NDIS_STATUS_SUCCESS;
- RT28XX_MLME_HANDLER(pAdapter);
- }while(0);
- return 0;
-}
-
-int rt_ioctl_giwscan(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *data, char *extra)
-{
-
- PRTMP_ADAPTER pAdapter = dev->ml_priv;
- int i=0;
- char *current_ev = extra, *previous_ev = extra;
- char *end_buf;
- char *current_val, custom[MAX_CUSTOM_LEN] = {0};
-#ifndef IWEVGENIE
- char idx;
-#endif // IWEVGENIE //
- struct iw_event iwe;
-
- if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
- {
- /*
- * Still scanning, indicate the caller should try again.
- */
- return -EAGAIN;
- }
-
- if (pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE)
- {
- pAdapter->StaCfg.WpaSupplicantScanCount = 0;
- }
-
- if (pAdapter->ScanTab.BssNr == 0)
- {
- data->length = 0;
- return 0;
- }
-
-#if WIRELESS_EXT >= 17
- if (data->length > 0)
- end_buf = extra + data->length;
- else
- end_buf = extra + IW_SCAN_MAX_DATA;
-#else
- end_buf = extra + IW_SCAN_MAX_DATA;
-#endif
-
- for (i = 0; i < pAdapter->ScanTab.BssNr; i++)
- {
- if (current_ev >= end_buf)
- {
-#if WIRELESS_EXT >= 17
- return -E2BIG;
-#else
- break;
-#endif
- }
-
- //MAC address
- //================================
- memset(&iwe, 0, sizeof(iwe));
- iwe.cmd = SIOCGIWAP;
- iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
- memcpy(iwe.u.ap_addr.sa_data, &pAdapter->ScanTab.BssEntry[i].Bssid, ETH_ALEN);
-
- previous_ev = current_ev;
- current_ev = iwe_stream_add_event(info, current_ev,end_buf, &iwe, IW_EV_ADDR_LEN);
-#ifdef RT30xx
- if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
- return -E2BIG;
-#else
- break;
-#endif
-
- /*
- Protocol:
- it will show scanned AP's WirelessMode .
- it might be
- 802.11a
- 802.11a/n
- 802.11g/n
- 802.11b/g/n
- 802.11g
- 802.11b/g
- */
- memset(&iwe, 0, sizeof(iwe));
- iwe.cmd = SIOCGIWNAME;
-
-
- {
- PBSS_ENTRY pBssEntry=&pAdapter->ScanTab.BssEntry[i];
- BOOLEAN isGonly=FALSE;
- int rateCnt=0;
-
- if (pBssEntry->Channel>14)
- {
- if (pBssEntry->HtCapabilityLen!=0)
- strcpy(iwe.u.name,"802.11a/n");
- else
- strcpy(iwe.u.name,"802.11a");
- }
- else
- {
- /*
- if one of non B mode rate is set supported rate . it mean G only.
- */
- for (rateCnt=0;rateCnt<pBssEntry->SupRateLen;rateCnt++)
- {
- /*
- 6Mbps(140) 9Mbps(146) and >=12Mbps(152) are supported rate , it mean G only.
- */
- if (pBssEntry->SupRate[rateCnt]==140 || pBssEntry->SupRate[rateCnt]==146 || pBssEntry->SupRate[rateCnt]>=152)
- isGonly=TRUE;
- }
-
- for (rateCnt=0;rateCnt<pBssEntry->ExtRateLen;rateCnt++)
- {
- if (pBssEntry->ExtRate[rateCnt]==140 || pBssEntry->ExtRate[rateCnt]==146 || pBssEntry->ExtRate[rateCnt]>=152)
- isGonly=TRUE;
- }
-
-
- if (pBssEntry->HtCapabilityLen!=0)
- {
- if (isGonly==TRUE)
- strcpy(iwe.u.name,"802.11g/n");
- else
- strcpy(iwe.u.name,"802.11b/g/n");
- }
- else
- {
- if (isGonly==TRUE)
- strcpy(iwe.u.name,"802.11g");
- else
- {
- if (pBssEntry->SupRateLen==4 && pBssEntry->ExtRateLen==0)
- strcpy(iwe.u.name,"802.11b");
- else
- strcpy(iwe.u.name,"802.11b/g");
- }
- }
- }
- }
-
- previous_ev = current_ev;
- current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_ADDR_LEN);
-#endif /* RT30xx */
- if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
- return -E2BIG;
-#else
- break;
-#endif
-
- //ESSID
- //================================
- memset(&iwe, 0, sizeof(iwe));
- iwe.cmd = SIOCGIWESSID;
- iwe.u.data.length = pAdapter->ScanTab.BssEntry[i].SsidLen;
- iwe.u.data.flags = 1;
-
- previous_ev = current_ev;
- current_ev = iwe_stream_add_point(info, current_ev,end_buf, &iwe, pAdapter->ScanTab.BssEntry[i].Ssid);
- if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
- return -E2BIG;
-#else
- break;
-#endif
-
- //Network Type
- //================================
- memset(&iwe, 0, sizeof(iwe));
- iwe.cmd = SIOCGIWMODE;
- if (pAdapter->ScanTab.BssEntry[i].BssType == Ndis802_11IBSS)
- {
- iwe.u.mode = IW_MODE_ADHOC;
- }
- else if (pAdapter->ScanTab.BssEntry[i].BssType == Ndis802_11Infrastructure)
- {
- iwe.u.mode = IW_MODE_INFRA;
- }
- else
- {
- iwe.u.mode = IW_MODE_AUTO;
- }
- iwe.len = IW_EV_UINT_LEN;
-
- previous_ev = current_ev;
- current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_UINT_LEN);
- if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
- return -E2BIG;
-#else
- break;
-#endif
-
- //Channel and Frequency
- //================================
- memset(&iwe, 0, sizeof(iwe));
- iwe.cmd = SIOCGIWFREQ;
- if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter))
- iwe.u.freq.m = pAdapter->ScanTab.BssEntry[i].Channel;
- else
- iwe.u.freq.m = pAdapter->ScanTab.BssEntry[i].Channel;
- iwe.u.freq.e = 0;
- iwe.u.freq.i = 0;
-
- previous_ev = current_ev;
- current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_FREQ_LEN);
- if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
- return -E2BIG;
-#else
- break;
-#endif
-
- //Add quality statistics
- //================================
- memset(&iwe, 0, sizeof(iwe));
- iwe.cmd = IWEVQUAL;
- iwe.u.qual.level = 0;
- iwe.u.qual.noise = 0;
- set_quality(pAdapter, &iwe.u.qual, pAdapter->ScanTab.BssEntry[i].Rssi);
- current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_QUAL_LEN);
- if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
- return -E2BIG;
-#else
- break;
-#endif
-
- //Encyption key
- //================================
- memset(&iwe, 0, sizeof(iwe));
- iwe.cmd = SIOCGIWENCODE;
- if (CAP_IS_PRIVACY_ON (pAdapter->ScanTab.BssEntry[i].CapabilityInfo ))
- iwe.u.data.flags =IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
- else
- iwe.u.data.flags = IW_ENCODE_DISABLED;
-
- previous_ev = current_ev;
- current_ev = iwe_stream_add_point(info, current_ev, end_buf,&iwe, (char *)pAdapter->SharedKey[BSS0][(iwe.u.data.flags & IW_ENCODE_INDEX)-1].Key);
- if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
- return -E2BIG;
-#else
- break;
-#endif
-
- //Bit Rate
- //================================
- if (pAdapter->ScanTab.BssEntry[i].SupRateLen)
- {
- UCHAR tmpRate = pAdapter->ScanTab.BssEntry[i].SupRate[pAdapter->ScanTab.BssEntry[i].SupRateLen-1];
- memset(&iwe, 0, sizeof(iwe));
- iwe.cmd = SIOCGIWRATE;
- current_val = current_ev + IW_EV_LCP_LEN;
- if (tmpRate == 0x82)
- iwe.u.bitrate.value = 1 * 1000000;
- else if (tmpRate == 0x84)
- iwe.u.bitrate.value = 2 * 1000000;
- else if (tmpRate == 0x8B)
- iwe.u.bitrate.value = 5.5 * 1000000;
- else if (tmpRate == 0x96)
- iwe.u.bitrate.value = 11 * 1000000;
- else
- iwe.u.bitrate.value = (tmpRate/2) * 1000000;
-
- iwe.u.bitrate.disabled = 0;
- current_val = iwe_stream_add_value(info, current_ev,
- current_val, end_buf, &iwe,
- IW_EV_PARAM_LEN);
-
- if((current_val-current_ev)>IW_EV_LCP_LEN)
- current_ev = current_val;
- else
-#if WIRELESS_EXT >= 17
- return -E2BIG;
-#else
- break;
-#endif
- }
-
-#ifdef IWEVGENIE
- //WPA IE
- if (pAdapter->ScanTab.BssEntry[i].WpaIE.IELen > 0)
- {
- memset(&iwe, 0, sizeof(iwe));
- memset(&custom[0], 0, MAX_CUSTOM_LEN);
- memcpy(custom, &(pAdapter->ScanTab.BssEntry[i].WpaIE.IE[0]),
- pAdapter->ScanTab.BssEntry[i].WpaIE.IELen);
- iwe.cmd = IWEVGENIE;
- iwe.u.data.length = pAdapter->ScanTab.BssEntry[i].WpaIE.IELen;
- current_ev = iwe_stream_add_point(info, current_ev, end_buf, &iwe, custom);
- if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
- return -E2BIG;
-#else
- break;
-#endif
- }
-
- //WPA2 IE
- if (pAdapter->ScanTab.BssEntry[i].RsnIE.IELen > 0)
- {
- memset(&iwe, 0, sizeof(iwe));
- memset(&custom[0], 0, MAX_CUSTOM_LEN);
- memcpy(custom, &(pAdapter->ScanTab.BssEntry[i].RsnIE.IE[0]),
- pAdapter->ScanTab.BssEntry[i].RsnIE.IELen);
- iwe.cmd = IWEVGENIE;
- iwe.u.data.length = pAdapter->ScanTab.BssEntry[i].RsnIE.IELen;
- current_ev = iwe_stream_add_point(info, current_ev, end_buf, &iwe, custom);
- if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
- return -E2BIG;
-#else
- break;
-#endif
- }
-#else
- //WPA IE
- //================================
- if (pAdapter->ScanTab.BssEntry[i].WpaIE.IELen > 0)
- {
- NdisZeroMemory(&iwe, sizeof(iwe));
- memset(&custom[0], 0, MAX_CUSTOM_LEN);
- iwe.cmd = IWEVCUSTOM;
- iwe.u.data.length = (pAdapter->ScanTab.BssEntry[i].WpaIE.IELen * 2) + 7;
- NdisMoveMemory(custom, "wpa_ie=", 7);
- for (idx = 0; idx < pAdapter->ScanTab.BssEntry[i].WpaIE.IELen; idx++)
- sprintf(custom + strlen(custom), "%02x", pAdapter->ScanTab.BssEntry[i].WpaIE.IE[idx]);
- previous_ev = current_ev;
- current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, custom);
- if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
- return -E2BIG;
-#else
- break;
-#endif
- }
-
- //WPA2 IE
- if (pAdapter->ScanTab.BssEntry[i].RsnIE.IELen > 0)
- {
- NdisZeroMemory(&iwe, sizeof(iwe));
- memset(&custom[0], 0, MAX_CUSTOM_LEN);
- iwe.cmd = IWEVCUSTOM;
- iwe.u.data.length = (pAdapter->ScanTab.BssEntry[i].RsnIE.IELen * 2) + 7;
- NdisMoveMemory(custom, "rsn_ie=", 7);
- for (idx = 0; idx < pAdapter->ScanTab.BssEntry[i].RsnIE.IELen; idx++)
- sprintf(custom + strlen(custom), "%02x", pAdapter->ScanTab.BssEntry[i].RsnIE.IE[idx]);
- previous_ev = current_ev;
- current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, custom);
- if (current_ev == previous_ev)
-#if WIRELESS_EXT >= 17
- return -E2BIG;
-#else
- break;
-#endif
- }
-#endif // IWEVGENIE //
- }
-
- data->length = current_ev - extra;
- pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE;
- DBGPRINT(RT_DEBUG_ERROR ,("===>rt_ioctl_giwscan. %d(%d) BSS returned, data->length = %d\n",i , pAdapter->ScanTab.BssNr, data->length));
- return 0;
-}
-#endif
-
-int rt_ioctl_siwessid(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *data, char *essid)
-{
- PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
- //check if the interface is down
- if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
- return -ENETDOWN;
- }
-
- if (data->flags)
- {
- PCHAR pSsidString = NULL;
-
- // Includes null character.
- if (data->length > (IW_ESSID_MAX_SIZE + 1))
- return -E2BIG;
-
- pSsidString = (CHAR *) kmalloc(MAX_LEN_OF_SSID+1, MEM_ALLOC_FLAG);
- if (pSsidString)
- {
- NdisZeroMemory(pSsidString, MAX_LEN_OF_SSID+1);
- NdisMoveMemory(pSsidString, essid, data->length);
- if (Set_SSID_Proc(pAdapter, pSsidString) == FALSE)
- return -EINVAL;
- }
- else
- return -ENOMEM;
- }
- else
- {
- // ANY ssid
- if (Set_SSID_Proc(pAdapter, "") == FALSE)
- return -EINVAL;
- }
- return 0;
-}
-
-int rt_ioctl_giwessid(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *data, char *essid)
-{
-#ifndef RT30xx
- PRTMP_ADAPTER pAdapter = NULL;
- VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
- if (dev->priv_flags == INT_MAIN)
- {
- pAdapter = dev->ml_priv;
- }
- else
- {
- pVirtualAd = dev->ml_priv;
- if (pVirtualAd && pVirtualAd->RtmpDev)
- pAdapter = pVirtualAd->RtmpDev->ml_priv;
- }
-
- if (pAdapter == NULL)
- {
- /* if 1st open fail, pAd will be free;
- So the net_dev->ml_priv will be NULL in 2rd open */
- return -ENETDOWN;
- }
-#endif
-#ifdef RT30xx
- PRTMP_ADAPTER pAdapter = dev->ml_priv;
-#endif
-
- data->flags = 1;
- if (MONITOR_ON(pAdapter))
- {
- data->length = 0;
- return 0;
- }
-
- if (OPSTATUS_TEST_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED))
- {
- DBGPRINT(RT_DEBUG_TRACE ,("MediaState is connected\n"));
- data->length = pAdapter->CommonCfg.SsidLen;
- memcpy(essid, pAdapter->CommonCfg.Ssid, pAdapter->CommonCfg.SsidLen);
- }
-#ifdef RT2870
- // Add for RT2870
- else if (pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
- {
- data->length = pAdapter->CommonCfg.SsidLen;
- memcpy(essid, pAdapter->CommonCfg.Ssid, pAdapter->CommonCfg.SsidLen);
- }
-#endif // RT2870 //
- else
- {//the ANY ssid was specified
- data->length = 0;
- DBGPRINT(RT_DEBUG_TRACE ,("MediaState is not connected, ess\n"));
- }
-
- return 0;
-
-}
-
-int rt_ioctl_siwnickn(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *data, char *nickname)
-{
- PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
- //check if the interface is down
- if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
- {
- DBGPRINT(RT_DEBUG_TRACE ,("INFO::Network is down!\n"));
- return -ENETDOWN;
- }
-
- if (data->length > IW_ESSID_MAX_SIZE)
- return -EINVAL;
-
- memset(pAdapter->nickname, 0, IW_ESSID_MAX_SIZE + 1);
- memcpy(pAdapter->nickname, nickname, data->length);
-
-
- return 0;
-}
-
-int rt_ioctl_giwnickn(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *data, char *nickname)
-{
-#ifndef RT30xx
- PRTMP_ADAPTER pAdapter = NULL;
- VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
- if (dev->priv_flags == INT_MAIN)
- {
- pAdapter = dev->ml_priv;
- }
- else
- {
- pVirtualAd = dev->ml_priv;
- if (pVirtualAd && pVirtualAd->RtmpDev)
- pAdapter = pVirtualAd->RtmpDev->ml_priv;
- }
-
- if (pAdapter == NULL)
- {
- /* if 1st open fail, pAd will be free;
- So the net_dev->ml_priv will be NULL in 2rd open */
- return -ENETDOWN;
- }
-#endif
-#ifdef RT30xx
- PRTMP_ADAPTER pAdapter = dev->ml_priv;
-#endif
-
- if (data->length > strlen(pAdapter->nickname) + 1)
- data->length = strlen(pAdapter->nickname) + 1;
- if (data->length > 0) {
- memcpy(nickname, pAdapter->nickname, data->length-1);
- nickname[data->length-1] = '\0';
- }
- return 0;
-}
-
-int rt_ioctl_siwrts(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *rts, char *extra)
-{
- PRTMP_ADAPTER pAdapter = dev->ml_priv;
- u16 val;
-
- //check if the interface is down
- if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
- return -ENETDOWN;
- }
-
- if (rts->disabled)
- val = MAX_RTS_THRESHOLD;
- else if (rts->value < 0 || rts->value > MAX_RTS_THRESHOLD)
- return -EINVAL;
- else if (rts->value == 0)
- val = MAX_RTS_THRESHOLD;
- else
- val = rts->value;
-
- if (val != pAdapter->CommonCfg.RtsThreshold)
- pAdapter->CommonCfg.RtsThreshold = val;
-
- return 0;
-}
-
-int rt_ioctl_giwrts(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *rts, char *extra)
-{
-#ifndef RT30xx
- PRTMP_ADAPTER pAdapter = NULL;
- VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
- if (dev->priv_flags == INT_MAIN)
- {
- pAdapter = dev->ml_priv;
- }
- else
- {
- pVirtualAd = dev->ml_priv;
- if (pVirtualAd && pVirtualAd->RtmpDev)
- pAdapter = pVirtualAd->RtmpDev->ml_priv;
- }
-
- if (pAdapter == NULL)
- {
- /* if 1st open fail, pAd will be free;
- So the net_dev->ml_priv will be NULL in 2rd open */
- return -ENETDOWN;
- }
-#endif
-#ifdef RT30xx
- PRTMP_ADAPTER pAdapter = dev->ml_priv;
-#endif
-
- //check if the interface is down
- if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
- return -ENETDOWN;
- }
-
- rts->value = pAdapter->CommonCfg.RtsThreshold;
- rts->disabled = (rts->value == MAX_RTS_THRESHOLD);
- rts->fixed = 1;
-
- return 0;
-}
-
-int rt_ioctl_siwfrag(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *frag, char *extra)
-{
- PRTMP_ADAPTER pAdapter = dev->ml_priv;
- u16 val;
-
- //check if the interface is down
- if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
- return -ENETDOWN;
- }
-
- if (frag->disabled)
- val = MAX_FRAG_THRESHOLD;
- else if (frag->value >= MIN_FRAG_THRESHOLD || frag->value <= MAX_FRAG_THRESHOLD)
- val = __cpu_to_le16(frag->value & ~0x1); /* even numbers only */
- else if (frag->value == 0)
- val = MAX_FRAG_THRESHOLD;
- else
- return -EINVAL;
-
- pAdapter->CommonCfg.FragmentThreshold = val;
- return 0;
-}
-
-int rt_ioctl_giwfrag(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_param *frag, char *extra)
-{
-#ifndef RT30xx
- PRTMP_ADAPTER pAdapter = NULL;
- VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
- if (dev->priv_flags == INT_MAIN)
- {
- pAdapter = dev->ml_priv;
- }
- else
- {
- pVirtualAd = dev->ml_priv;
- if (pVirtualAd && pVirtualAd->RtmpDev)
- pAdapter = pVirtualAd->RtmpDev->ml_priv;
- }
-
- if (pAdapter == NULL)
- {
- /* if 1st open fail, pAd will be free;
- So the net_dev->ml_priv will be NULL in 2rd open */
- return -ENETDOWN;
- }
-#endif
-#ifdef RT30xx
- PRTMP_ADAPTER pAdapter = dev->ml_priv;
-#endif
-
- //check if the interface is down
- if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
- return -ENETDOWN;
- }
-
- frag->value = pAdapter->CommonCfg.FragmentThreshold;
- frag->disabled = (frag->value == MAX_FRAG_THRESHOLD);
- frag->fixed = 1;
-
- return 0;
-}
-
-#define MAX_WEP_KEY_SIZE 13
-#define MIN_WEP_KEY_SIZE 5
-int rt_ioctl_siwencode(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *erq, char *extra)
-{
- PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
- //check if the interface is down
- if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
- return -ENETDOWN;
- }
-
- if ((erq->length == 0) &&
- (erq->flags & IW_ENCODE_DISABLED))
- {
- pAdapter->StaCfg.PairCipher = Ndis802_11WEPDisabled;
- pAdapter->StaCfg.GroupCipher = Ndis802_11WEPDisabled;
- pAdapter->StaCfg.WepStatus = Ndis802_11WEPDisabled;
- pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
- goto done;
- }
-#ifndef RT30xx
- else if ((erq->length == 0) &&
- (erq->flags & IW_ENCODE_RESTRICTED || erq->flags & IW_ENCODE_OPEN))
-#endif
-#ifdef RT30xx
- else if (erq->flags & IW_ENCODE_RESTRICTED || erq->flags & IW_ENCODE_OPEN)
-#endif
- {
- STA_PORT_SECURED(pAdapter);
- pAdapter->StaCfg.PairCipher = Ndis802_11WEPEnabled;
- pAdapter->StaCfg.GroupCipher = Ndis802_11WEPEnabled;
- pAdapter->StaCfg.WepStatus = Ndis802_11WEPEnabled;
- pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
- if (erq->flags & IW_ENCODE_RESTRICTED)
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeShared;
- else
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
-#ifndef RT30xx
- goto done;
-#endif
- }
-
- if (erq->length > 0)
- {
- int keyIdx = (erq->flags & IW_ENCODE_INDEX) - 1;
- /* Check the size of the key */
- if (erq->length > MAX_WEP_KEY_SIZE)
- {
- return -EINVAL;
- }
- /* Check key index */
- if ((keyIdx < 0) || (keyIdx >= NR_WEP_KEYS))
- {
- DBGPRINT(RT_DEBUG_TRACE ,("==>rt_ioctl_siwencode::Wrong keyIdx=%d! Using default key instead (%d)\n",
- keyIdx, pAdapter->StaCfg.DefaultKeyId));
-
- //Using default key
- keyIdx = pAdapter->StaCfg.DefaultKeyId;
- }
-#ifdef RT30xx
- else
- {
- pAdapter->StaCfg.DefaultKeyId=keyIdx;
- }
-#endif
-
- NdisZeroMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, 16);
-
- if (erq->length == MAX_WEP_KEY_SIZE)
- {
- pAdapter->SharedKey[BSS0][keyIdx].KeyLen = MAX_WEP_KEY_SIZE;
- pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_WEP128;
- }
- else if (erq->length == MIN_WEP_KEY_SIZE)
- {
- pAdapter->SharedKey[BSS0][keyIdx].KeyLen = MIN_WEP_KEY_SIZE;
- pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_WEP64;
- }
- else
- /* Disable the key */
- pAdapter->SharedKey[BSS0][keyIdx].KeyLen = 0;
-
- /* Check if the key is not marked as invalid */
- if(!(erq->flags & IW_ENCODE_NOKEY))
- {
- /* Copy the key in the driver */
- NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, extra, erq->length);
- }
- }
- else
- {
- /* Do we want to just set the transmit key index ? */
- int index = (erq->flags & IW_ENCODE_INDEX) - 1;
- if ((index >= 0) && (index < 4))
- {
- pAdapter->StaCfg.DefaultKeyId = index;
- }
- else
- /* Don't complain if only change the mode */
- if (!(erq->flags & IW_ENCODE_MODE))
- {
- return -EINVAL;
- }
- }
-
-done:
- DBGPRINT(RT_DEBUG_TRACE ,("==>rt_ioctl_siwencode::erq->flags=%x\n",erq->flags));
- DBGPRINT(RT_DEBUG_TRACE ,("==>rt_ioctl_siwencode::AuthMode=%x\n",pAdapter->StaCfg.AuthMode));
- DBGPRINT(RT_DEBUG_TRACE ,("==>rt_ioctl_siwencode::DefaultKeyId=%x, KeyLen = %d\n",pAdapter->StaCfg.DefaultKeyId , pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen));
- DBGPRINT(RT_DEBUG_TRACE ,("==>rt_ioctl_siwencode::WepStatus=%x\n",pAdapter->StaCfg.WepStatus));
- return 0;
-}
-
-int
-rt_ioctl_giwencode(struct net_device *dev,
- struct iw_request_info *info,
- struct iw_point *erq, char *key)
-{
-#ifdef RT30xx
- PRTMP_ADAPTER pAdapter = dev->ml_priv;
-#endif
- int kid;
-#ifndef RT30xx
- PRTMP_ADAPTER pAdapter = NULL;
- VIRTUAL_ADAPTER *pVirtualAd = NULL;
-
- if (dev->priv_flags == INT_MAIN)
- {
- pAdapter = dev->ml_priv;
- }
- else
- {
- pVirtualAd = dev->ml_priv;
- if (pVirtualAd && pVirtualAd->RtmpDev)
- pAdapter = pVirtualAd->RtmpDev->ml_priv;
- }
-
- if (pAdapter == NULL)
- {
- /* if 1st open fail, pAd will be free;
- So the net_dev->ml_priv will be NULL in 2rd open */
- return -ENETDOWN;
- }
-#endif
-
- //check if the interface is down
- if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
- return -ENETDOWN;
- }
-
- kid = erq->flags & IW_ENCODE_INDEX;
- DBGPRINT(RT_DEBUG_TRACE, ("===>rt_ioctl_giwencode %d\n", erq->flags & IW_ENCODE_INDEX));
-
- if (pAdapter->StaCfg.WepStatus == Ndis802_11WEPDisabled)
- {
- erq->length = 0;
- erq->flags = IW_ENCODE_DISABLED;
- }
- else if ((kid > 0) && (kid <=4))
- {
- // copy wep key
- erq->flags = kid ; /* NB: base 1 */
- if (erq->length > pAdapter->SharedKey[BSS0][kid-1].KeyLen)
- erq->length = pAdapter->SharedKey[BSS0][kid-1].KeyLen;
- memcpy(key, pAdapter->SharedKey[BSS0][kid-1].Key, erq->length);
- //if ((kid == pAdapter->PortCfg.DefaultKeyId))
- //erq->flags |= IW_ENCODE_ENABLED; /* XXX */
- if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeShared)
- erq->flags |= IW_ENCODE_RESTRICTED; /* XXX */
- else
- erq->flags |= IW_ENCODE_OPEN; /* XXX */
-
- }
- else if (kid == 0)
- {
- if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeShared)
- erq->flags |= IW_ENCODE_RESTRICTED; /* XXX */
- else
- erq->flags |= IW_ENCODE_OPEN; /* XXX */
- erq->length = pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].KeyLen;
- memcpy(key, pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId].Key, erq->length);
- // copy default key ID
- if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeShared)
- erq->flags |= IW_ENCODE_RESTRICTED; /* XXX */
- else
- erq->flags |= IW_ENCODE_OPEN; /* XXX */
- erq->flags = pAdapter->StaCfg.DefaultKeyId + 1; /* NB: base 1 */
- erq->flags |= IW_ENCODE_ENABLED; /* XXX */
- }
-
- return 0;
-
-}
-
-static int
-rt_ioctl_setparam(struct net_device *dev, struct iw_request_info *info,
- void *w, char *extra)
-{
- VIRTUAL_ADAPTER *pVirtualAd = NULL;
- PRTMP_ADAPTER pAdapter;
- POS_COOKIE pObj;
- char *this_char = extra;
- char *value;
- int Status=0;
-
- if (dev->priv_flags == INT_MAIN)
- {
- pAdapter = dev->ml_priv;
- }
- else
- {
- pVirtualAd = dev->ml_priv;
- pAdapter = pVirtualAd->RtmpDev->ml_priv;
- }
- pObj = (POS_COOKIE) pAdapter->OS_Cookie;
-
- if (pAdapter == NULL)
- {
- /* if 1st open fail, pAd will be free;
- So the net_dev->ml_priv will be NULL in 2rd open */
- return -ENETDOWN;
- }
-
- {
- pObj->ioctl_if_type = INT_MAIN;
- pObj->ioctl_if = MAIN_MBSSID;
- }
-
- //check if the interface is down
- if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
- return -ENETDOWN;
- }
-
- if (!*this_char)
- return -EINVAL;
-
- if ((value = rtstrchr(this_char, '=')) != NULL)
- *value++ = 0;
-
- if (!value)
- return -EINVAL;
-
- // reject setting nothing besides ANY ssid(ssidLen=0)
- if (!*value && (strcmp(this_char, "SSID") != 0))
- return -EINVAL;
-
- for (PRTMP_PRIVATE_SET_PROC = RTMP_PRIVATE_SUPPORT_PROC; PRTMP_PRIVATE_SET_PROC->name; PRTMP_PRIVATE_SET_PROC++)
- {
- if (strcmp(this_char, PRTMP_PRIVATE_SET_PROC->name) == 0)
- {
- if(!PRTMP_PRIVATE_SET_PROC->set_proc(pAdapter, value))
- { //FALSE:Set private failed then return Invalid argument
- Status = -EINVAL;
- }
- break; //Exit for loop.
- }
- }
-
- if(PRTMP_PRIVATE_SET_PROC->name == NULL)
- { //Not found argument
- Status = -EINVAL;
- DBGPRINT(RT_DEBUG_TRACE, ("===>rt_ioctl_setparam:: (iwpriv) Not Support Set Command [%s=%s]\n", this_char, value));
- }
-
- return Status;
-}
-
-
-static int
-rt_private_get_statistics(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra)
-{
- INT Status = 0;
- PRTMP_ADAPTER pAd = dev->ml_priv;
-
- if (extra == NULL)
- {
- wrq->length = 0;
- return -EIO;
- }
-
- memset(extra, 0x00, IW_PRIV_SIZE_MASK);
- sprintf(extra, "\n\n");
-
- {
- sprintf(extra+strlen(extra), "Tx success = %ld\n", (ULONG)pAd->WlanCounters.TransmittedFragmentCount.QuadPart);
- sprintf(extra+strlen(extra), "Tx success without retry = %ld\n", (ULONG)pAd->WlanCounters.TransmittedFragmentCount.QuadPart - (ULONG)pAd->WlanCounters.RetryCount.QuadPart);
- }
- sprintf(extra+strlen(extra), "Tx success after retry = %ld\n", (ULONG)pAd->WlanCounters.RetryCount.QuadPart);
- sprintf(extra+strlen(extra), "Tx fail to Rcv ACK after retry = %ld\n", (ULONG)pAd->WlanCounters.FailedCount.QuadPart);
- sprintf(extra+strlen(extra), "RTS Success Rcv CTS = %ld\n", (ULONG)pAd->WlanCounters.RTSSuccessCount.QuadPart);
- sprintf(extra+strlen(extra), "RTS Fail Rcv CTS = %ld\n", (ULONG)pAd->WlanCounters.RTSFailureCount.QuadPart);
-
- sprintf(extra+strlen(extra), "Rx success = %ld\n", (ULONG)pAd->WlanCounters.ReceivedFragmentCount.QuadPart);
- sprintf(extra+strlen(extra), "Rx with CRC = %ld\n", (ULONG)pAd->WlanCounters.FCSErrorCount.QuadPart);
- sprintf(extra+strlen(extra), "Rx drop due to out of resource = %ld\n", (ULONG)pAd->Counters8023.RxNoBuffer);
- sprintf(extra+strlen(extra), "Rx duplicate frame = %ld\n", (ULONG)pAd->WlanCounters.FrameDuplicateCount.QuadPart);
-
- sprintf(extra+strlen(extra), "False CCA (one second) = %ld\n", (ULONG)pAd->RalinkCounters.OneSecFalseCCACnt);
- {
- sprintf(extra+strlen(extra), "RSSI-A = %ld\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi0 - pAd->BbpRssiToDbmDelta));
- sprintf(extra+strlen(extra), "RSSI-B (if available) = %ld\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi1 - pAd->BbpRssiToDbmDelta));
- sprintf(extra+strlen(extra), "RSSI-C (if available) = %ld\n\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi2 - pAd->BbpRssiToDbmDelta));
- }
- sprintf(extra+strlen(extra), "WpaSupplicantUP = %d\n\n", pAd->StaCfg.WpaSupplicantUP);
-
- wrq->length = strlen(extra) + 1; // 1: size of '\0'
- DBGPRINT(RT_DEBUG_TRACE, ("<== rt_private_get_statistics, wrq->length = %d\n", wrq->length));
-
- return Status;
-}
-
-void getBaInfo(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR pOutBuf)
-{
- INT i, j;
- BA_ORI_ENTRY *pOriBAEntry;
- BA_REC_ENTRY *pRecBAEntry;
-
- for (i=0; i<MAX_LEN_OF_MAC_TABLE; i++)
- {
- PMAC_TABLE_ENTRY pEntry = &pAd->MacTab.Content[i];
- if (((pEntry->ValidAsCLI || pEntry->ValidAsApCli) && (pEntry->Sst == SST_ASSOC))
- || (pEntry->ValidAsWDS) || (pEntry->ValidAsMesh))
- {
- sprintf(pOutBuf + strlen(pOutBuf), "\n%02X:%02X:%02X:%02X:%02X:%02X (Aid = %d) (AP) -\n",
- pEntry->Addr[0], pEntry->Addr[1], pEntry->Addr[2],
- pEntry->Addr[3], pEntry->Addr[4], pEntry->Addr[5], pEntry->Aid);
-
- sprintf(pOutBuf, "%s[Recipient]\n", pOutBuf);
- for (j=0; j < NUM_OF_TID; j++)
- {
- if (pEntry->BARecWcidArray[j] != 0)
- {
- pRecBAEntry =&pAd->BATable.BARecEntry[pEntry->BARecWcidArray[j]];
- sprintf(pOutBuf + strlen(pOutBuf), "TID=%d, BAWinSize=%d, LastIndSeq=%d, ReorderingPkts=%d\n", j, pRecBAEntry->BAWinSize, pRecBAEntry->LastIndSeq, pRecBAEntry->list.qlen);
- }
- }
- sprintf(pOutBuf, "%s\n", pOutBuf);
-
- sprintf(pOutBuf, "%s[Originator]\n", pOutBuf);
- for (j=0; j < NUM_OF_TID; j++)
- {
- if (pEntry->BAOriWcidArray[j] != 0)
- {
- pOriBAEntry =&pAd->BATable.BAOriEntry[pEntry->BAOriWcidArray[j]];
- sprintf(pOutBuf + strlen(pOutBuf), "TID=%d, BAWinSize=%d, StartSeq=%d, CurTxSeq=%d\n", j, pOriBAEntry->BAWinSize, pOriBAEntry->Sequence, pEntry->TxSeq[j]);
- }
- }
- sprintf(pOutBuf, "%s\n\n", pOutBuf);
- }
- if (strlen(pOutBuf) > (IW_PRIV_SIZE_MASK - 30))
- break;
- }
-
- return;
-}
-
-static int
-rt_private_show(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra)
-{
- INT Status = 0;
- VIRTUAL_ADAPTER *pVirtualAd = NULL;
- PRTMP_ADAPTER pAd;
- POS_COOKIE pObj;
- u32 subcmd = wrq->flags;
-
- if (dev->priv_flags == INT_MAIN)
- pAd = dev->ml_priv;
- else
- {
- pVirtualAd = dev->ml_priv;
- pAd = pVirtualAd->RtmpDev->ml_priv;
- }
- pObj = (POS_COOKIE) pAd->OS_Cookie;
-
- if (pAd == NULL)
- {
- /* if 1st open fail, pAd will be free;
- So the net_dev->ml_priv will be NULL in 2rd open */
- return -ENETDOWN;
- }
-
- if (extra == NULL)
- {
- wrq->length = 0;
- return -EIO;
- }
- memset(extra, 0x00, IW_PRIV_SIZE_MASK);
-
- {
- pObj->ioctl_if_type = INT_MAIN;
- pObj->ioctl_if = MAIN_MBSSID;
- }
-
- switch(subcmd)
- {
-
- case SHOW_CONN_STATUS:
- if (MONITOR_ON(pAd))
- {
- if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
- pAd->CommonCfg.RegTransmitSetting.field.BW)
- sprintf(extra, "Monitor Mode(CentralChannel %d)\n", pAd->CommonCfg.CentralChannel);
- else
- sprintf(extra, "Monitor Mode(Channel %d)\n", pAd->CommonCfg.Channel);
- }
- else
- {
- if (pAd->IndicateMediaState == NdisMediaStateConnected)
- {
- if (INFRA_ON(pAd))
- {
- sprintf(extra, "Connected(AP: %s[%02X:%02X:%02X:%02X:%02X:%02X])\n",
- pAd->CommonCfg.Ssid,
- pAd->CommonCfg.Bssid[0],
- pAd->CommonCfg.Bssid[1],
- pAd->CommonCfg.Bssid[2],
- pAd->CommonCfg.Bssid[3],
- pAd->CommonCfg.Bssid[4],
- pAd->CommonCfg.Bssid[5]);
- DBGPRINT(RT_DEBUG_TRACE ,("Ssid=%s ,Ssidlen = %d\n",pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen));
- }
- else if (ADHOC_ON(pAd))
- sprintf(extra, "Connected\n");
- }
- else
- {
- sprintf(extra, "Disconnected\n");
- DBGPRINT(RT_DEBUG_TRACE ,("ConnStatus is not connected\n"));
- }
- }
- wrq->length = strlen(extra) + 1; // 1: size of '\0'
- break;
- case SHOW_DRVIER_VERION:
- sprintf(extra, "Driver version-%s, %s %s\n", STA_DRIVER_VERSION, __DATE__, __TIME__ );
- wrq->length = strlen(extra) + 1; // 1: size of '\0'
- break;
- case SHOW_BA_INFO:
- getBaInfo(pAd, extra);
- wrq->length = strlen(extra) + 1; // 1: size of '\0'
- break;
- case SHOW_DESC_INFO:
- {
- Show_DescInfo_Proc(pAd, NULL);
- wrq->length = 0; // 1: size of '\0'
- }
- break;
- case RAIO_OFF:
- if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
- {
- sprintf(extra, "Scanning\n");
- wrq->length = strlen(extra) + 1; // 1: size of '\0'
- break;
- }
- pAd->StaCfg.bSwRadio = FALSE;
- if (pAd->StaCfg.bRadio != (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio))
- {
- pAd->StaCfg.bRadio = (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio);
- if (pAd->StaCfg.bRadio == FALSE)
- {
- MlmeRadioOff(pAd);
- // Update extra information
- pAd->ExtraInfo = SW_RADIO_OFF;
- }
- }
- sprintf(extra, "Radio Off\n");
- wrq->length = strlen(extra) + 1; // 1: size of '\0'
- break;
- case RAIO_ON:
- if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
- {
- sprintf(extra, "Scanning\n");
- wrq->length = strlen(extra) + 1; // 1: size of '\0'
- break;
- }
- pAd->StaCfg.bSwRadio = TRUE;
- //if (pAd->StaCfg.bRadio != (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio))
- {
- pAd->StaCfg.bRadio = (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio);
- if (pAd->StaCfg.bRadio == TRUE)
- {
- MlmeRadioOn(pAd);
- // Update extra information
- pAd->ExtraInfo = EXTRA_INFO_CLEAR;
- }
- }
- sprintf(extra, "Radio On\n");
- wrq->length = strlen(extra) + 1; // 1: size of '\0'
- break;
-
- case SHOW_CFG_VALUE:
- {
- Status = RTMPShowCfgValue(pAd, wrq->pointer, extra);
- if (Status == 0)
- wrq->length = strlen(extra) + 1; // 1: size of '\0'
- }
- break;
-#ifndef RT30xx
- case SHOW_ADHOC_ENTRY_INFO:
- Show_Adhoc_MacTable_Proc(pAd, extra);
- wrq->length = strlen(extra) + 1; // 1: size of '\0'
- break;
-#endif
- default:
- DBGPRINT(RT_DEBUG_TRACE, ("%s - unknow subcmd = %d\n", __func__, subcmd));
- break;
- }
-
- return Status;
-}
-
-#ifdef SIOCSIWMLME
-int rt_ioctl_siwmlme(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- PRTMP_ADAPTER pAd = dev->ml_priv;
- struct iw_mlme *pMlme = (struct iw_mlme *)wrqu->data.pointer;
- MLME_QUEUE_ELEM MsgElem;
- MLME_DISASSOC_REQ_STRUCT DisAssocReq;
- MLME_DEAUTH_REQ_STRUCT DeAuthReq;
-
- DBGPRINT(RT_DEBUG_TRACE, ("====> %s\n", __func__));
-
- if (pMlme == NULL)
- return -EINVAL;
-
- switch(pMlme->cmd)
- {
-#ifdef IW_MLME_DEAUTH
- case IW_MLME_DEAUTH:
- DBGPRINT(RT_DEBUG_TRACE, ("====> %s - IW_MLME_DEAUTH\n", __func__));
- COPY_MAC_ADDR(DeAuthReq.Addr, pAd->CommonCfg.Bssid);
- DeAuthReq.Reason = pMlme->reason_code;
- MsgElem.MsgLen = sizeof(MLME_DEAUTH_REQ_STRUCT);
- NdisMoveMemory(MsgElem.Msg, &DeAuthReq, sizeof(MLME_DEAUTH_REQ_STRUCT));
- MlmeDeauthReqAction(pAd, &MsgElem);
- if (INFRA_ON(pAd))
- {
- LinkDown(pAd, FALSE);
- pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
- }
- break;
-#endif // IW_MLME_DEAUTH //
-#ifdef IW_MLME_DISASSOC
- case IW_MLME_DISASSOC:
- DBGPRINT(RT_DEBUG_TRACE, ("====> %s - IW_MLME_DISASSOC\n", __func__));
- COPY_MAC_ADDR(DisAssocReq.Addr, pAd->CommonCfg.Bssid);
- DisAssocReq.Reason = pMlme->reason_code;
-
- MsgElem.Machine = ASSOC_STATE_MACHINE;
- MsgElem.MsgType = MT2_MLME_DISASSOC_REQ;
- MsgElem.MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
- NdisMoveMemory(MsgElem.Msg, &DisAssocReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
-
- pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
- MlmeDisassocReqAction(pAd, &MsgElem);
- break;
-#endif // IW_MLME_DISASSOC //
- default:
- DBGPRINT(RT_DEBUG_TRACE, ("====> %s - Unknow Command\n", __func__));
- break;
- }
-
- return 0;
-}
-#endif // SIOCSIWMLME //
-
-#if WIRELESS_EXT > 17
-int rt_ioctl_siwauth(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- PRTMP_ADAPTER pAdapter = dev->ml_priv;
- struct iw_param *param = &wrqu->param;
-
- //check if the interface is down
- if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
- return -ENETDOWN;
- }
- switch (param->flags & IW_AUTH_INDEX) {
- case IW_AUTH_WPA_VERSION:
- if (param->value == IW_AUTH_WPA_VERSION_WPA)
- {
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPAPSK;
- if (pAdapter->StaCfg.BssType == BSS_ADHOC)
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPANone;
- }
- else if (param->value == IW_AUTH_WPA_VERSION_WPA2)
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2PSK;
-
- DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_WPA_VERSION - param->value = %d!\n", __func__, param->value));
- break;
- case IW_AUTH_CIPHER_PAIRWISE:
- if (param->value == IW_AUTH_CIPHER_NONE)
- {
- pAdapter->StaCfg.WepStatus = Ndis802_11WEPDisabled;
- pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
- pAdapter->StaCfg.PairCipher = Ndis802_11WEPDisabled;
- }
- else if (param->value == IW_AUTH_CIPHER_WEP40 ||
- param->value == IW_AUTH_CIPHER_WEP104)
- {
- pAdapter->StaCfg.WepStatus = Ndis802_11WEPEnabled;
- pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
- pAdapter->StaCfg.PairCipher = Ndis802_11WEPEnabled;
- pAdapter->StaCfg.IEEE8021X = FALSE;
- }
- else if (param->value == IW_AUTH_CIPHER_TKIP)
- {
- pAdapter->StaCfg.WepStatus = Ndis802_11Encryption2Enabled;
- pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
- pAdapter->StaCfg.PairCipher = Ndis802_11Encryption2Enabled;
- }
- else if (param->value == IW_AUTH_CIPHER_CCMP)
- {
- pAdapter->StaCfg.WepStatus = Ndis802_11Encryption3Enabled;
- pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
- pAdapter->StaCfg.PairCipher = Ndis802_11Encryption3Enabled;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_CIPHER_PAIRWISE - param->value = %d!\n", __func__, param->value));
- break;
- case IW_AUTH_CIPHER_GROUP:
- if (param->value == IW_AUTH_CIPHER_NONE)
- {
- pAdapter->StaCfg.GroupCipher = Ndis802_11WEPDisabled;
- }
- else if (param->value == IW_AUTH_CIPHER_WEP40 ||
- param->value == IW_AUTH_CIPHER_WEP104)
- {
- pAdapter->StaCfg.GroupCipher = Ndis802_11WEPEnabled;
- }
- else if (param->value == IW_AUTH_CIPHER_TKIP)
- {
- pAdapter->StaCfg.GroupCipher = Ndis802_11Encryption2Enabled;
- }
- else if (param->value == IW_AUTH_CIPHER_CCMP)
- {
- pAdapter->StaCfg.GroupCipher = Ndis802_11Encryption3Enabled;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_CIPHER_GROUP - param->value = %d!\n", __func__, param->value));
- break;
- case IW_AUTH_KEY_MGMT:
- if (param->value == IW_AUTH_KEY_MGMT_802_1X)
- {
- if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK)
- {
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA;
- pAdapter->StaCfg.IEEE8021X = FALSE;
- }
- else if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
- {
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2;
- pAdapter->StaCfg.IEEE8021X = FALSE;
- }
- else
- // WEP 1x
- pAdapter->StaCfg.IEEE8021X = TRUE;
- }
- else if (param->value == 0)
- {
- STA_PORT_SECURED(pAdapter);
- }
- DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_KEY_MGMT - param->value = %d!\n", __func__, param->value));
- break;
- case IW_AUTH_RX_UNENCRYPTED_EAPOL:
- break;
- case IW_AUTH_PRIVACY_INVOKED:
- DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_PRIVACY_INVOKED - param->value = %d!\n", __func__, param->value));
- break;
- case IW_AUTH_DROP_UNENCRYPTED:
- if (param->value != 0)
- pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
- else
- {
- STA_PORT_SECURED(pAdapter);
- }
- DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_WPA_VERSION - param->value = %d!\n", __func__, param->value));
- break;
- case IW_AUTH_80211_AUTH_ALG:
- if (param->value & IW_AUTH_ALG_SHARED_KEY)
- {
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeShared;
- }
- else if (param->value & IW_AUTH_ALG_OPEN_SYSTEM)
- {
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
- }
- else
- return -EINVAL;
- DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_80211_AUTH_ALG - param->value = %d!\n", __func__, param->value));
- break;
- case IW_AUTH_WPA_ENABLED:
- DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_AUTH_WPA_ENABLED - Driver supports WPA!(param->value = %d)\n", __func__, param->value));
- break;
- default:
- return -EOPNOTSUPP;
-}
-
- return 0;
-}
-
-int rt_ioctl_giwauth(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- PRTMP_ADAPTER pAdapter = dev->ml_priv;
- struct iw_param *param = &wrqu->param;
-
- //check if the interface is down
- if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
- return -ENETDOWN;
- }
-
- switch (param->flags & IW_AUTH_INDEX) {
- case IW_AUTH_DROP_UNENCRYPTED:
- param->value = (pAdapter->StaCfg.WepStatus == Ndis802_11WEPDisabled) ? 0 : 1;
- break;
-
- case IW_AUTH_80211_AUTH_ALG:
- param->value = (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeShared) ? IW_AUTH_ALG_SHARED_KEY : IW_AUTH_ALG_OPEN_SYSTEM;
- break;
-
- case IW_AUTH_WPA_ENABLED:
- param->value = (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA) ? 1 : 0;
- break;
-
- default:
- return -EOPNOTSUPP;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("rt_ioctl_giwauth::param->value = %d!\n", param->value));
- return 0;
-}
-
-void fnSetCipherKey(
- IN PRTMP_ADAPTER pAdapter,
- IN INT keyIdx,
- IN UCHAR CipherAlg,
- IN BOOLEAN bGTK,
- IN struct iw_encode_ext *ext)
-{
- NdisZeroMemory(&pAdapter->SharedKey[BSS0][keyIdx], sizeof(CIPHER_KEY));
- pAdapter->SharedKey[BSS0][keyIdx].KeyLen = LEN_TKIP_EK;
- NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, ext->key, LEN_TKIP_EK);
- NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].TxMic, ext->key + LEN_TKIP_EK, LEN_TKIP_TXMICK);
- NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].RxMic, ext->key + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK);
- pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CipherAlg;
-
- // Update group key information to ASIC Shared Key Table
- AsicAddSharedKeyEntry(pAdapter,
- BSS0,
- keyIdx,
- pAdapter->SharedKey[BSS0][keyIdx].CipherAlg,
- pAdapter->SharedKey[BSS0][keyIdx].Key,
- pAdapter->SharedKey[BSS0][keyIdx].TxMic,
- pAdapter->SharedKey[BSS0][keyIdx].RxMic);
-
- if (bGTK)
- // Update ASIC WCID attribute table and IVEIV table
- RTMPAddWcidAttributeEntry(pAdapter,
- BSS0,
- keyIdx,
- pAdapter->SharedKey[BSS0][keyIdx].CipherAlg,
- NULL);
- else
- // Update ASIC WCID attribute table and IVEIV table
- RTMPAddWcidAttributeEntry(pAdapter,
- BSS0,
- keyIdx,
- pAdapter->SharedKey[BSS0][keyIdx].CipherAlg,
- &pAdapter->MacTab.Content[BSSID_WCID]);
-}
-
-int rt_ioctl_siwencodeext(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
- {
- PRTMP_ADAPTER pAdapter = dev->ml_priv;
- struct iw_point *encoding = &wrqu->encoding;
- struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
- int keyIdx, alg = ext->alg;
-
- //check if the interface is down
- if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
- return -ENETDOWN;
- }
-
- if (encoding->flags & IW_ENCODE_DISABLED)
- {
- keyIdx = (encoding->flags & IW_ENCODE_INDEX) - 1;
- // set BSSID wcid entry of the Pair-wise Key table as no-security mode
- AsicRemovePairwiseKeyEntry(pAdapter, BSS0, BSSID_WCID);
- pAdapter->SharedKey[BSS0][keyIdx].KeyLen = 0;
- pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_NONE;
- AsicRemoveSharedKeyEntry(pAdapter, 0, (UCHAR)keyIdx);
- NdisZeroMemory(&pAdapter->SharedKey[BSS0][keyIdx], sizeof(CIPHER_KEY));
- DBGPRINT(RT_DEBUG_TRACE, ("%s::Remove all keys!(encoding->flags = %x)\n", __func__, encoding->flags));
- }
- else
- {
- // Get Key Index and convet to our own defined key index
- keyIdx = (encoding->flags & IW_ENCODE_INDEX) - 1;
- if((keyIdx < 0) || (keyIdx >= NR_WEP_KEYS))
- return -EINVAL;
-
- if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
- {
- pAdapter->StaCfg.DefaultKeyId = keyIdx;
- DBGPRINT(RT_DEBUG_TRACE, ("%s::DefaultKeyId = %d\n", __func__, pAdapter->StaCfg.DefaultKeyId));
- }
-
- switch (alg) {
- case IW_ENCODE_ALG_NONE:
- DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_ENCODE_ALG_NONE\n", __func__));
- break;
- case IW_ENCODE_ALG_WEP:
- DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_ENCODE_ALG_WEP - ext->key_len = %d, keyIdx = %d\n", __func__, ext->key_len, keyIdx));
- if (ext->key_len == MAX_WEP_KEY_SIZE)
- {
- pAdapter->SharedKey[BSS0][keyIdx].KeyLen = MAX_WEP_KEY_SIZE;
- pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_WEP128;
- }
- else if (ext->key_len == MIN_WEP_KEY_SIZE)
- {
- pAdapter->SharedKey[BSS0][keyIdx].KeyLen = MIN_WEP_KEY_SIZE;
- pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_WEP64;
- }
- else
- return -EINVAL;
-
- NdisZeroMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, 16);
- NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, ext->key, ext->key_len);
-#ifndef RT30xx
- if (pAdapter->StaCfg.GroupCipher == Ndis802_11GroupWEP40Enabled ||
- pAdapter->StaCfg.GroupCipher == Ndis802_11GroupWEP104Enabled)
- {
- // Set Group key material to Asic
- AsicAddSharedKeyEntry(pAdapter, BSS0, keyIdx, pAdapter->SharedKey[BSS0][keyIdx].CipherAlg, pAdapter->SharedKey[BSS0][keyIdx].Key, NULL, NULL);
-
- // Update WCID attribute table and IVEIV table for this group key table
- RTMPAddWcidAttributeEntry(pAdapter, BSS0, keyIdx, pAdapter->SharedKey[BSS0][keyIdx].CipherAlg, NULL);
-
- STA_PORT_SECURED(pAdapter);
-
- // Indicate Connected for GUI
- pAdapter->IndicateMediaState = NdisMediaStateConnected;
- }
-#endif
- break;
- case IW_ENCODE_ALG_TKIP:
- DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_ENCODE_ALG_TKIP - keyIdx = %d, ext->key_len = %d\n", __func__, keyIdx, ext->key_len));
- if (ext->key_len == 32)
- {
- if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
- {
- fnSetCipherKey(pAdapter, keyIdx, CIPHER_TKIP, FALSE, ext);
- if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA2)
- {
- STA_PORT_SECURED(pAdapter);
- }
- }
- else if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY)
- {
- fnSetCipherKey(pAdapter, keyIdx, CIPHER_TKIP, TRUE, ext);
-
- // set 802.1x port control
- STA_PORT_SECURED(pAdapter);
- }
- }
- else
- return -EINVAL;
- break;
- case IW_ENCODE_ALG_CCMP:
- if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
- {
- fnSetCipherKey(pAdapter, keyIdx, CIPHER_AES, FALSE, ext);
- if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA2)
- STA_PORT_SECURED(pAdapter);
- }
- else if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY)
- {
- fnSetCipherKey(pAdapter, keyIdx, CIPHER_AES, TRUE, ext);
-
- // set 802.1x port control
- STA_PORT_SECURED(pAdapter);
- }
- break;
- default:
- return -EINVAL;
- }
- }
-
- return 0;
-}
-
-int
-rt_ioctl_giwencodeext(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- PRTMP_ADAPTER pAd = dev->ml_priv;
- PCHAR pKey = NULL;
- struct iw_point *encoding = &wrqu->encoding;
- struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
- int idx, max_key_len;
-
- DBGPRINT(RT_DEBUG_TRACE ,("===> rt_ioctl_giwencodeext\n"));
-
- max_key_len = encoding->length - sizeof(*ext);
- if (max_key_len < 0)
- return -EINVAL;
-
- idx = encoding->flags & IW_ENCODE_INDEX;
- if (idx)
- {
- if (idx < 1 || idx > 4)
- return -EINVAL;
- idx--;
-
- if ((pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) ||
- (pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled))
- {
- if (idx != pAd->StaCfg.DefaultKeyId)
- {
- ext->key_len = 0;
- return 0;
- }
- }
- }
- else
- idx = pAd->StaCfg.DefaultKeyId;
-
- encoding->flags = idx + 1;
- memset(ext, 0, sizeof(*ext));
-
- ext->key_len = 0;
- switch(pAd->StaCfg.WepStatus) {
- case Ndis802_11WEPDisabled:
- ext->alg = IW_ENCODE_ALG_NONE;
- encoding->flags |= IW_ENCODE_DISABLED;
- break;
- case Ndis802_11WEPEnabled:
- ext->alg = IW_ENCODE_ALG_WEP;
- if (pAd->SharedKey[BSS0][idx].KeyLen > max_key_len)
- return -E2BIG;
- else
- {
- ext->key_len = pAd->SharedKey[BSS0][idx].KeyLen;
- pKey = &(pAd->SharedKey[BSS0][idx].Key[0]);
- }
- break;
- case Ndis802_11Encryption2Enabled:
- case Ndis802_11Encryption3Enabled:
- if (pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled)
- ext->alg = IW_ENCODE_ALG_TKIP;
- else
- ext->alg = IW_ENCODE_ALG_CCMP;
-
- if (max_key_len < 32)
- return -E2BIG;
- else
- {
- ext->key_len = 32;
- pKey = &pAd->StaCfg.PMK[0];
- }
- break;
- default:
- return -EINVAL;
- }
-
- if (ext->key_len && pKey)
- {
- encoding->flags |= IW_ENCODE_ENABLED;
- memcpy(ext->key, pKey, ext->key_len);
- }
-
- return 0;
-}
-
-#ifdef SIOCSIWGENIE
-int rt_ioctl_siwgenie(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- PRTMP_ADAPTER pAd = dev->ml_priv;
-
- if (wrqu->data.length > MAX_LEN_OF_RSNIE ||
- (wrqu->data.length && extra == NULL))
- return -EINVAL;
-
- if (wrqu->data.length)
- {
- pAd->StaCfg.RSNIE_Len = wrqu->data.length;
- NdisMoveMemory(&pAd->StaCfg.RSN_IE[0], extra, pAd->StaCfg.RSNIE_Len);
- }
- else
- {
- pAd->StaCfg.RSNIE_Len = 0;
- NdisZeroMemory(&pAd->StaCfg.RSN_IE[0], MAX_LEN_OF_RSNIE);
- }
-
- return 0;
-}
-#endif // SIOCSIWGENIE //
-
-int rt_ioctl_giwgenie(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- PRTMP_ADAPTER pAd = dev->ml_priv;
-
- if ((pAd->StaCfg.RSNIE_Len == 0) ||
- (pAd->StaCfg.AuthMode < Ndis802_11AuthModeWPA))
- {
- wrqu->data.length = 0;
- return 0;
- }
-
-#ifdef SIOCSIWGENIE
- if (pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE)
- {
- if (wrqu->data.length < pAd->StaCfg.RSNIE_Len)
- return -E2BIG;
-
- wrqu->data.length = pAd->StaCfg.RSNIE_Len;
- memcpy(extra, &pAd->StaCfg.RSN_IE[0], pAd->StaCfg.RSNIE_Len);
- }
- else
-#endif // SIOCSIWGENIE //
- {
- UCHAR RSNIe = IE_WPA;
-
- if (wrqu->data.length < (pAd->StaCfg.RSNIE_Len + 2)) // ID, Len
- return -E2BIG;
- wrqu->data.length = pAd->StaCfg.RSNIE_Len + 2;
-
- if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK) ||
- (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2))
- RSNIe = IE_RSN;
-
- extra[0] = (char)RSNIe;
- extra[1] = pAd->StaCfg.RSNIE_Len;
- memcpy(extra+2, &pAd->StaCfg.RSN_IE[0], pAd->StaCfg.RSNIE_Len);
- }
-
- return 0;
-}
-
-int rt_ioctl_siwpmksa(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu,
- char *extra)
-{
- PRTMP_ADAPTER pAd = dev->ml_priv;
- struct iw_pmksa *pPmksa = (struct iw_pmksa *)wrqu->data.pointer;
- INT CachedIdx = 0, idx = 0;
-
- if (pPmksa == NULL)
- return -EINVAL;
-
- DBGPRINT(RT_DEBUG_TRACE ,("===> rt_ioctl_siwpmksa\n"));
- switch(pPmksa->cmd)
- {
- case IW_PMKSA_FLUSH:
- NdisZeroMemory(pAd->StaCfg.SavedPMK, sizeof(BSSID_INFO)*PMKID_NO);
- DBGPRINT(RT_DEBUG_TRACE ,("rt_ioctl_siwpmksa - IW_PMKSA_FLUSH\n"));
- break;
- case IW_PMKSA_REMOVE:
- for (CachedIdx = 0; CachedIdx < pAd->StaCfg.SavedPMKNum; CachedIdx++)
- {
- // compare the BSSID
- if (NdisEqualMemory(pPmksa->bssid.sa_data, pAd->StaCfg.SavedPMK[CachedIdx].BSSID, MAC_ADDR_LEN))
- {
- NdisZeroMemory(pAd->StaCfg.SavedPMK[CachedIdx].BSSID, MAC_ADDR_LEN);
- NdisZeroMemory(pAd->StaCfg.SavedPMK[CachedIdx].PMKID, 16);
- for (idx = CachedIdx; idx < (pAd->StaCfg.SavedPMKNum - 1); idx++)
- {
- NdisMoveMemory(&pAd->StaCfg.SavedPMK[idx].BSSID[0], &pAd->StaCfg.SavedPMK[idx+1].BSSID[0], MAC_ADDR_LEN);
- NdisMoveMemory(&pAd->StaCfg.SavedPMK[idx].PMKID[0], &pAd->StaCfg.SavedPMK[idx+1].PMKID[0], 16);
- }
- pAd->StaCfg.SavedPMKNum--;
- break;
- }
- }
-
- DBGPRINT(RT_DEBUG_TRACE ,("rt_ioctl_siwpmksa - IW_PMKSA_REMOVE\n"));
- break;
- case IW_PMKSA_ADD:
- for (CachedIdx = 0; CachedIdx < pAd->StaCfg.SavedPMKNum; CachedIdx++)
- {
- // compare the BSSID
- if (NdisEqualMemory(pPmksa->bssid.sa_data, pAd->StaCfg.SavedPMK[CachedIdx].BSSID, MAC_ADDR_LEN))
- break;
- }
-
- // Found, replace it
- if (CachedIdx < PMKID_NO)
- {
- DBGPRINT(RT_DEBUG_OFF, ("Update PMKID, idx = %d\n", CachedIdx));
- NdisMoveMemory(&pAd->StaCfg.SavedPMK[CachedIdx].BSSID[0], pPmksa->bssid.sa_data, MAC_ADDR_LEN);
- NdisMoveMemory(&pAd->StaCfg.SavedPMK[CachedIdx].PMKID[0], pPmksa->pmkid, 16);
- pAd->StaCfg.SavedPMKNum++;
- }
- // Not found, replace the last one
- else
- {
- // Randomly replace one
- CachedIdx = (pPmksa->bssid.sa_data[5] % PMKID_NO);
- DBGPRINT(RT_DEBUG_OFF, ("Update PMKID, idx = %d\n", CachedIdx));
- NdisMoveMemory(&pAd->StaCfg.SavedPMK[CachedIdx].BSSID[0], pPmksa->bssid.sa_data, MAC_ADDR_LEN);
- NdisMoveMemory(&pAd->StaCfg.SavedPMK[CachedIdx].PMKID[0], pPmksa->pmkid, 16);
- }
-
- DBGPRINT(RT_DEBUG_TRACE ,("rt_ioctl_siwpmksa - IW_PMKSA_ADD\n"));
- break;
- default:
- DBGPRINT(RT_DEBUG_TRACE ,("rt_ioctl_siwpmksa - Unknow Command!!\n"));
- break;
- }
-
- return 0;
-}
-#endif // #if WIRELESS_EXT > 17
-
-#ifdef DBG
-static int
-rt_private_ioctl_bbp(struct net_device *dev, struct iw_request_info *info,
- struct iw_point *wrq, char *extra)
- {
- CHAR *this_char;
- CHAR *value = NULL;
- UCHAR regBBP = 0;
- UINT32 bbpId;
- UINT32 bbpValue;
- BOOLEAN bIsPrintAllBBP = FALSE;
- INT Status = 0;
- PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
-
- memset(extra, 0x00, IW_PRIV_SIZE_MASK);
-
- if (wrq->length > 1) //No parameters.
- {
- sprintf(extra, "\n");
-
- //Parsing Read or Write
- this_char = wrq->pointer;
- DBGPRINT(RT_DEBUG_TRACE, ("this_char=%s\n", this_char));
- if (!*this_char)
- goto next;
-
- if ((value = rtstrchr(this_char, '=')) != NULL)
- *value++ = 0;
-
- if (!value || !*value)
- { //Read
- DBGPRINT(RT_DEBUG_TRACE, ("this_char=%s, value=%s\n", this_char, value));
- if (sscanf(this_char, "%d", &(bbpId)) == 1)
- {
-#ifndef RT30xx
- if (bbpId <= 136)
-#endif // RT30xx //
-#ifdef RT30xx
- if (bbpId <= 138) // edit by johnli, RF power sequence setup, add BBP R138 for ADC dynamic on/off control
-#endif // RT30xx //
- {
- {
- RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP);
- }
- sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X\n", bbpId, bbpId*2, regBBP);
- wrq->length = strlen(extra) + 1; // 1: size of '\0'
- DBGPRINT(RT_DEBUG_TRACE, ("msg=%s\n", extra));
- }
- else
- {//Invalid parametes, so default printk all bbp
- bIsPrintAllBBP = TRUE;
- goto next;
- }
- }
- else
- { //Invalid parametes, so default printk all bbp
- bIsPrintAllBBP = TRUE;
- goto next;
- }
- }
- else
- { //Write
- if ((sscanf(this_char, "%d", &(bbpId)) == 1) && (sscanf(value, "%x", &(bbpValue)) == 1))
- {
-#ifndef RT30xx
- if (bbpId <= 136)
-#endif // RT30xx //
-#ifdef RT30xx
- if (bbpId <= 138) // edit by johnli, RF power sequence setup, add BBP R138 for ADC dynamic on/off control
-#endif // RT30xx //
- {
- {
- RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue);
- //Read it back for showing
- RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP);
- }
- sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X\n", bbpId, bbpId*2, regBBP);
- wrq->length = strlen(extra) + 1; // 1: size of '\0'
- DBGPRINT(RT_DEBUG_TRACE, ("msg=%s\n", extra));
- }
- else
- {//Invalid parametes, so default printk all bbp
- bIsPrintAllBBP = TRUE;
- goto next;
- }
- }
- else
- { //Invalid parametes, so default printk all bbp
- bIsPrintAllBBP = TRUE;
- goto next;
- }
- }
- }
- else
- bIsPrintAllBBP = TRUE;
-
-next:
- if (bIsPrintAllBBP)
- {
- memset(extra, 0x00, IW_PRIV_SIZE_MASK);
- sprintf(extra, "\n");
-#ifndef RT30xx
- for (bbpId = 0; bbpId <= 136; bbpId++)
-#endif // RT30xx //
-#ifdef RT30xx
- for (bbpId = 0; bbpId <= 138; bbpId++) // edit by johnli, RF power sequence setup, add BBP R138 for ADC dynamic on/off control
-#endif // RT30xx //
- {
- if (strlen(extra) >= (IW_PRIV_SIZE_MASK - 10))
- break;
- RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP);
-#ifndef RT30xx
- sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X ", bbpId, bbpId*2, regBBP);
- if (bbpId%5 == 4)
- sprintf(extra+strlen(extra), "\n");
-#endif
-#ifdef RT30xx
- sprintf(extra+strlen(extra), "%03d = %02X\n", bbpId, regBBP); // edit by johnli, change display format
-#endif
- }
-
- wrq->length = strlen(extra) + 1; // 1: size of '\0'
- DBGPRINT(RT_DEBUG_TRACE, ("wrq->length = %d\n", wrq->length));
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("<==rt_private_ioctl_bbp\n\n"));
-
- return Status;
-}
-#endif // DBG //
-
-int rt_ioctl_siwrate(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- PRTMP_ADAPTER pAd = dev->ml_priv;
- UINT32 rate = wrqu->bitrate.value, fixed = wrqu->bitrate.fixed;
-
- //check if the interface is down
- if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("rt_ioctl_siwrate::Network is down!\n"));
- return -ENETDOWN;
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("rt_ioctl_siwrate::(rate = %d, fixed = %d)\n", rate, fixed));
- /* rate = -1 => auto rate
- rate = X, fixed = 1 => (fixed rate X)
- */
- if (rate == -1)
- {
- //Auto Rate
- pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
- pAd->StaCfg.bAutoTxRateSwitch = TRUE;
- if ((pAd->CommonCfg.PhyMode <= PHY_11G) ||
- (pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE <= MODE_OFDM))
- RTMPSetDesiredRates(pAd, -1);
-
- SetCommonHT(pAd);
- }
- else
- {
- if (fixed)
- {
- pAd->StaCfg.bAutoTxRateSwitch = FALSE;
- if ((pAd->CommonCfg.PhyMode <= PHY_11G) ||
- (pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE <= MODE_OFDM))
- RTMPSetDesiredRates(pAd, rate);
- else
- {
- pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
- SetCommonHT(pAd);
- }
- DBGPRINT(RT_DEBUG_TRACE, ("rt_ioctl_siwrate::(HtMcs=%d)\n",pAd->StaCfg.DesiredTransmitSetting.field.MCS));
- }
- else
- {
- // TODO: rate = X, fixed = 0 => (rates <= X)
- return -EOPNOTSUPP;
- }
- }
-
- return 0;
-}
-
-int rt_ioctl_giwrate(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- PRTMP_ADAPTER pAd = dev->ml_priv;
- int rate_index = 0, rate_count = 0;
- HTTRANSMIT_SETTING ht_setting;
- __s32 ralinkrate[] =
- {2, 4, 11, 22, // CCK
- 12, 18, 24, 36, 48, 72, 96, 108, // OFDM
- 13, 26, 39, 52, 78, 104, 117, 130, 26, 52, 78, 104, 156, 208, 234, 260, // 20MHz, 800ns GI, MCS: 0 ~ 15
- 39, 78, 117, 156, 234, 312, 351, 390, // 20MHz, 800ns GI, MCS: 16 ~ 23
- 27, 54, 81, 108, 162, 216, 243, 270, 54, 108, 162, 216, 324, 432, 486, 540, // 40MHz, 800ns GI, MCS: 0 ~ 15
- 81, 162, 243, 324, 486, 648, 729, 810, // 40MHz, 800ns GI, MCS: 16 ~ 23
- 14, 29, 43, 57, 87, 115, 130, 144, 29, 59, 87, 115, 173, 230, 260, 288, // 20MHz, 400ns GI, MCS: 0 ~ 15
- 43, 87, 130, 173, 260, 317, 390, 433, // 20MHz, 400ns GI, MCS: 16 ~ 23
- 30, 60, 90, 120, 180, 240, 270, 300, 60, 120, 180, 240, 360, 480, 540, 600, // 40MHz, 400ns GI, MCS: 0 ~ 15
- 90, 180, 270, 360, 540, 720, 810, 900}; // 40MHz, 400ns GI, MCS: 16 ~ 23
-
- rate_count = sizeof(ralinkrate)/sizeof(__s32);
- //check if the interface is down
- if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
- return -ENETDOWN;
- }
-
- if ((pAd->StaCfg.bAutoTxRateSwitch == FALSE) &&
- (INFRA_ON(pAd)) &&
- ((pAd->CommonCfg.PhyMode <= PHY_11G) || (pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE <= MODE_OFDM)))
- ht_setting.word = pAd->StaCfg.HTPhyMode.word;
- else
- ht_setting.word = pAd->MacTab.Content[BSSID_WCID].HTPhyMode.word;
-
- if (ht_setting.field.MODE >= MODE_HTMIX)
- {
- rate_index = 12 + ((UCHAR)ht_setting.field.BW *24) + ((UCHAR)ht_setting.field.ShortGI *48) + ((UCHAR)ht_setting.field.MCS);
- }
- else
- if (ht_setting.field.MODE == MODE_OFDM)
- rate_index = (UCHAR)(ht_setting.field.MCS) + 4;
- else if (ht_setting.field.MODE == MODE_CCK)
- rate_index = (UCHAR)(ht_setting.field.MCS);
-
- if (rate_index < 0)
- rate_index = 0;
-
- if (rate_index > rate_count)
- rate_index = rate_count;
-
- wrqu->bitrate.value = ralinkrate[rate_index] * 500000;
- wrqu->bitrate.disabled = 0;
-
- return 0;
-}
-
-static const iw_handler rt_handler[] =
-{
- (iw_handler) NULL, /* SIOCSIWCOMMIT */
- (iw_handler) rt_ioctl_giwname, /* SIOCGIWNAME */
- (iw_handler) NULL, /* SIOCSIWNWID */
- (iw_handler) NULL, /* SIOCGIWNWID */
- (iw_handler) rt_ioctl_siwfreq, /* SIOCSIWFREQ */
- (iw_handler) rt_ioctl_giwfreq, /* SIOCGIWFREQ */
- (iw_handler) rt_ioctl_siwmode, /* SIOCSIWMODE */
- (iw_handler) rt_ioctl_giwmode, /* SIOCGIWMODE */
- (iw_handler) NULL, /* SIOCSIWSENS */
- (iw_handler) NULL, /* SIOCGIWSENS */
- (iw_handler) NULL /* not used */, /* SIOCSIWRANGE */
- (iw_handler) rt_ioctl_giwrange, /* SIOCGIWRANGE */
- (iw_handler) NULL /* not used */, /* SIOCSIWPRIV */
- (iw_handler) NULL /* kernel code */, /* SIOCGIWPRIV */
- (iw_handler) NULL /* not used */, /* SIOCSIWSTATS */
- (iw_handler) rt28xx_get_wireless_stats /* kernel code */, /* SIOCGIWSTATS */
- (iw_handler) NULL, /* SIOCSIWSPY */
- (iw_handler) NULL, /* SIOCGIWSPY */
- (iw_handler) NULL, /* SIOCSIWTHRSPY */
- (iw_handler) NULL, /* SIOCGIWTHRSPY */
- (iw_handler) rt_ioctl_siwap, /* SIOCSIWAP */
- (iw_handler) rt_ioctl_giwap, /* SIOCGIWAP */
-#ifdef SIOCSIWMLME
- (iw_handler) rt_ioctl_siwmlme, /* SIOCSIWMLME */
-#else
- (iw_handler) NULL, /* SIOCSIWMLME */
-#endif // SIOCSIWMLME //
- (iw_handler) rt_ioctl_iwaplist, /* SIOCGIWAPLIST */
-#ifdef SIOCGIWSCAN
- (iw_handler) rt_ioctl_siwscan, /* SIOCSIWSCAN */
- (iw_handler) rt_ioctl_giwscan, /* SIOCGIWSCAN */
-#else
- (iw_handler) NULL, /* SIOCSIWSCAN */
- (iw_handler) NULL, /* SIOCGIWSCAN */
-#endif /* SIOCGIWSCAN */
- (iw_handler) rt_ioctl_siwessid, /* SIOCSIWESSID */
- (iw_handler) rt_ioctl_giwessid, /* SIOCGIWESSID */
- (iw_handler) rt_ioctl_siwnickn, /* SIOCSIWNICKN */
- (iw_handler) rt_ioctl_giwnickn, /* SIOCGIWNICKN */
- (iw_handler) NULL, /* -- hole -- */
- (iw_handler) NULL, /* -- hole -- */
- (iw_handler) rt_ioctl_siwrate, /* SIOCSIWRATE */
- (iw_handler) rt_ioctl_giwrate, /* SIOCGIWRATE */
- (iw_handler) rt_ioctl_siwrts, /* SIOCSIWRTS */
- (iw_handler) rt_ioctl_giwrts, /* SIOCGIWRTS */
- (iw_handler) rt_ioctl_siwfrag, /* SIOCSIWFRAG */
- (iw_handler) rt_ioctl_giwfrag, /* SIOCGIWFRAG */
- (iw_handler) NULL, /* SIOCSIWTXPOW */
- (iw_handler) NULL, /* SIOCGIWTXPOW */
- (iw_handler) NULL, /* SIOCSIWRETRY */
- (iw_handler) NULL, /* SIOCGIWRETRY */
- (iw_handler) rt_ioctl_siwencode, /* SIOCSIWENCODE */
- (iw_handler) rt_ioctl_giwencode, /* SIOCGIWENCODE */
- (iw_handler) NULL, /* SIOCSIWPOWER */
- (iw_handler) NULL, /* SIOCGIWPOWER */
- (iw_handler) NULL, /* -- hole -- */
- (iw_handler) NULL, /* -- hole -- */
-#if WIRELESS_EXT > 17
- (iw_handler) rt_ioctl_siwgenie, /* SIOCSIWGENIE */
- (iw_handler) rt_ioctl_giwgenie, /* SIOCGIWGENIE */
- (iw_handler) rt_ioctl_siwauth, /* SIOCSIWAUTH */
- (iw_handler) rt_ioctl_giwauth, /* SIOCGIWAUTH */
- (iw_handler) rt_ioctl_siwencodeext, /* SIOCSIWENCODEEXT */
- (iw_handler) rt_ioctl_giwencodeext, /* SIOCGIWENCODEEXT */
- (iw_handler) rt_ioctl_siwpmksa, /* SIOCSIWPMKSA */
-#endif
-};
-
-static const iw_handler rt_priv_handlers[] = {
- (iw_handler) NULL, /* + 0x00 */
- (iw_handler) NULL, /* + 0x01 */
- (iw_handler) rt_ioctl_setparam, /* + 0x02 */
-#ifdef DBG
- (iw_handler) rt_private_ioctl_bbp, /* + 0x03 */
-#else
- (iw_handler) NULL, /* + 0x03 */
-#endif
- (iw_handler) NULL, /* + 0x04 */
- (iw_handler) NULL, /* + 0x05 */
- (iw_handler) NULL, /* + 0x06 */
- (iw_handler) NULL, /* + 0x07 */
- (iw_handler) NULL, /* + 0x08 */
- (iw_handler) rt_private_get_statistics, /* + 0x09 */
- (iw_handler) NULL, /* + 0x0A */
- (iw_handler) NULL, /* + 0x0B */
- (iw_handler) NULL, /* + 0x0C */
- (iw_handler) NULL, /* + 0x0D */
- (iw_handler) NULL, /* + 0x0E */
- (iw_handler) NULL, /* + 0x0F */
- (iw_handler) NULL, /* + 0x10 */
- (iw_handler) rt_private_show, /* + 0x11 */
- (iw_handler) NULL, /* + 0x12 */
- (iw_handler) NULL, /* + 0x13 */
- (iw_handler) NULL, /* + 0x15 */
- (iw_handler) NULL, /* + 0x17 */
- (iw_handler) NULL, /* + 0x18 */
-};
-
-const struct iw_handler_def rt28xx_iw_handler_def =
-{
-#define N(a) (sizeof (a) / sizeof (a[0]))
- .standard = (iw_handler *) rt_handler,
- .num_standard = sizeof(rt_handler) / sizeof(iw_handler),
- .private = (iw_handler *) rt_priv_handlers,
- .num_private = N(rt_priv_handlers),
- .private_args = (struct iw_priv_args *) privtab,
- .num_private_args = N(privtab),
-#if IW_HANDLER_VERSION >= 7
- .get_wireless_stats = rt28xx_get_wireless_stats,
-#endif
-};
-
-INT RTMPSetInformation(
- IN PRTMP_ADAPTER pAdapter,
- IN OUT struct ifreq *rq,
- IN INT cmd)
-{
- struct iwreq *wrq = (struct iwreq *) rq;
- NDIS_802_11_SSID Ssid;
- NDIS_802_11_MAC_ADDRESS Bssid;
- RT_802_11_PHY_MODE PhyMode;
- RT_802_11_STA_CONFIG StaConfig;
- NDIS_802_11_RATES aryRates;
- RT_802_11_PREAMBLE Preamble;
- NDIS_802_11_WEP_STATUS WepStatus;
- NDIS_802_11_AUTHENTICATION_MODE AuthMode = Ndis802_11AuthModeMax;
- NDIS_802_11_NETWORK_INFRASTRUCTURE BssType;
- NDIS_802_11_RTS_THRESHOLD RtsThresh;
- NDIS_802_11_FRAGMENTATION_THRESHOLD FragThresh;
- NDIS_802_11_POWER_MODE PowerMode;
- PNDIS_802_11_KEY pKey = NULL;
- PNDIS_802_11_WEP pWepKey =NULL;
- PNDIS_802_11_REMOVE_KEY pRemoveKey = NULL;
- NDIS_802_11_CONFIGURATION Config, *pConfig = NULL;
- NDIS_802_11_NETWORK_TYPE NetType;
- ULONG Now;
- UINT KeyIdx = 0;
- INT Status = NDIS_STATUS_SUCCESS, MaxPhyMode = PHY_11G;
- ULONG PowerTemp;
- BOOLEAN RadioState;
- BOOLEAN StateMachineTouched = FALSE;
- OID_SET_HT_PHYMODE HT_PhyMode; //11n ,kathy
- PNDIS_802_11_PMKID pPmkId = NULL;
- BOOLEAN IEEE8021xState = FALSE;
- BOOLEAN IEEE8021x_required_keys = FALSE;
- UCHAR wpa_supplicant_enable = 0;
-
- MaxPhyMode = PHY_11N_5G;
-
- DBGPRINT(RT_DEBUG_TRACE, ("-->RTMPSetInformation(), 0x%08x\n", cmd&0x7FFF));
- switch(cmd & 0x7FFF) {
- case RT_OID_802_11_COUNTRY_REGION:
- if (wrq->u.data.length < sizeof(UCHAR))
- Status = -EINVAL;
- // Only avaliable when EEPROM not programming
- else if (!(pAdapter->CommonCfg.CountryRegion & 0x80) && !(pAdapter->CommonCfg.CountryRegionForABand & 0x80))
- {
- ULONG Country;
- UCHAR TmpPhy;
-
- Status = copy_from_user(&Country, wrq->u.data.pointer, wrq->u.data.length);
- pAdapter->CommonCfg.CountryRegion = (UCHAR)(Country & 0x000000FF);
- pAdapter->CommonCfg.CountryRegionForABand = (UCHAR)((Country >> 8) & 0x000000FF);
- TmpPhy = pAdapter->CommonCfg.PhyMode;
- pAdapter->CommonCfg.PhyMode = 0xff;
- // Build all corresponding channel information
- RTMPSetPhyMode(pAdapter, TmpPhy);
- SetCommonHT(pAdapter);
- DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_COUNTRY_REGION (A:%d B/G:%d)\n", pAdapter->CommonCfg.CountryRegionForABand,
- pAdapter->CommonCfg.CountryRegion));
- }
- break;
- case OID_802_11_BSSID_LIST_SCAN:
- Now = jiffies;
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_BSSID_LIST_SCAN, TxCnt = %d \n", pAdapter->RalinkCounters.LastOneSecTotalTxCount));
-
- if (MONITOR_ON(pAdapter))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("!!! Driver is in Monitor Mode now !!!\n"));
- break;
- }
-
- //Benson add 20080527, when radio off, sta don't need to scan
- if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_RADIO_OFF))
- break;
-
- if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("!!! Driver is scanning now !!!\n"));
- pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
- Status = NDIS_STATUS_SUCCESS;
- break;
- }
-
- if (pAdapter->RalinkCounters.LastOneSecTotalTxCount > 100)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("!!! Link UP, ignore this set::OID_802_11_BSSID_LIST_SCAN\n"));
- Status = NDIS_STATUS_SUCCESS;
- pAdapter->StaCfg.ScanCnt = 99; // Prevent auto scan triggered by this OID
- break;
- }
-
- if ((OPSTATUS_TEST_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED)) &&
- ((pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
- (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
- (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) ||
- (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)) &&
- (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("!!! Link UP, Port Not Secured! ignore this set::OID_802_11_BSSID_LIST_SCAN\n"));
- Status = NDIS_STATUS_SUCCESS;
- pAdapter->StaCfg.ScanCnt = 99; // Prevent auto scan triggered by this OID
- break;
- }
-
-
- if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
- {
- RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
- DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
- }
-
- // tell CNTL state machine to call NdisMSetInformationComplete() after completing
- // this request, because this request is initiated by NDIS.
- pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE;
- // Reset allowed scan retries
- pAdapter->StaCfg.ScanCnt = 0;
- pAdapter->StaCfg.LastScanTime = Now;
-
- pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
- RTMP_SET_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
- MlmeEnqueue(pAdapter,
- MLME_CNTL_STATE_MACHINE,
- OID_802_11_BSSID_LIST_SCAN,
- 0,
- NULL);
-
- Status = NDIS_STATUS_SUCCESS;
- StateMachineTouched = TRUE;
- break;
- case OID_802_11_SSID:
- if (wrq->u.data.length != sizeof(NDIS_802_11_SSID))
- Status = -EINVAL;
- else
- {
- PCHAR pSsidString = NULL;
- Status = copy_from_user(&Ssid, wrq->u.data.pointer, wrq->u.data.length);
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_SSID (Len=%d,Ssid=%s)\n", Ssid.SsidLength, Ssid.Ssid));
- if (Ssid.SsidLength > MAX_LEN_OF_SSID)
- Status = -EINVAL;
- else
- {
- if (Ssid.SsidLength == 0)
- {
- Set_SSID_Proc(pAdapter, "");
- }
- else
- {
- pSsidString = (CHAR *) kmalloc(MAX_LEN_OF_SSID+1, MEM_ALLOC_FLAG);
- if (pSsidString)
- {
- NdisZeroMemory(pSsidString, MAX_LEN_OF_SSID+1);
- NdisMoveMemory(pSsidString, Ssid.Ssid, Ssid.SsidLength);
- Set_SSID_Proc(pAdapter, pSsidString);
- kfree(pSsidString);
- }
- else
- Status = -ENOMEM;
- }
- }
- }
- break;
- case OID_802_11_BSSID:
- if (wrq->u.data.length != sizeof(NDIS_802_11_MAC_ADDRESS))
- Status = -EINVAL;
- else
- {
- Status = copy_from_user(&Bssid, wrq->u.data.pointer, wrq->u.data.length);
-
- // tell CNTL state machine to call NdisMSetInformationComplete() after completing
- // this request, because this request is initiated by NDIS.
- pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE;
-
- // Prevent to connect AP again in STAMlmePeriodicExec
- pAdapter->MlmeAux.AutoReconnectSsidLen= 32;
-
- // Reset allowed scan retries
- pAdapter->StaCfg.ScanCnt = 0;
-
- if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
- {
- RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
- DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
- }
- MlmeEnqueue(pAdapter,
- MLME_CNTL_STATE_MACHINE,
- OID_802_11_BSSID,
- sizeof(NDIS_802_11_MAC_ADDRESS),
- (VOID *)&Bssid);
- Status = NDIS_STATUS_SUCCESS;
- StateMachineTouched = TRUE;
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_BSSID %02x:%02x:%02x:%02x:%02x:%02x\n",
- Bssid[0], Bssid[1], Bssid[2], Bssid[3], Bssid[4], Bssid[5]));
- }
- break;
- case RT_OID_802_11_RADIO:
- if (wrq->u.data.length != sizeof(BOOLEAN))
- Status = -EINVAL;
- else
- {
- Status = copy_from_user(&RadioState, wrq->u.data.pointer, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_RADIO (=%d)\n", RadioState));
- if (pAdapter->StaCfg.bSwRadio != RadioState)
- {
- pAdapter->StaCfg.bSwRadio = RadioState;
- if (pAdapter->StaCfg.bRadio != (pAdapter->StaCfg.bHwRadio && pAdapter->StaCfg.bSwRadio))
- {
- pAdapter->StaCfg.bRadio = (pAdapter->StaCfg.bHwRadio && pAdapter->StaCfg.bSwRadio);
- if (pAdapter->StaCfg.bRadio == TRUE)
- {
- MlmeRadioOn(pAdapter);
- // Update extra information
- pAdapter->ExtraInfo = EXTRA_INFO_CLEAR;
- }
- else
- {
- MlmeRadioOff(pAdapter);
- // Update extra information
- pAdapter->ExtraInfo = SW_RADIO_OFF;
- }
- }
- }
- }
- break;
- case RT_OID_802_11_PHY_MODE:
- if (wrq->u.data.length != sizeof(RT_802_11_PHY_MODE))
- Status = -EINVAL;
- else
- {
- Status = copy_from_user(&PhyMode, wrq->u.data.pointer, wrq->u.data.length);
- if (PhyMode <= MaxPhyMode)
- {
- RTMPSetPhyMode(pAdapter, PhyMode);
- SetCommonHT(pAdapter);
- }
- DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_PHY_MODE (=%d)\n", PhyMode));
- }
- break;
- case RT_OID_802_11_STA_CONFIG:
- if (wrq->u.data.length != sizeof(RT_802_11_STA_CONFIG))
- Status = -EINVAL;
- else
- {
- Status = copy_from_user(&StaConfig, wrq->u.data.pointer, wrq->u.data.length);
- pAdapter->CommonCfg.bEnableTxBurst = StaConfig.EnableTxBurst;
- pAdapter->CommonCfg.UseBGProtection = StaConfig.UseBGProtection;
- pAdapter->CommonCfg.bUseShortSlotTime = 1; // 2003-10-30 always SHORT SLOT capable
- if ((pAdapter->CommonCfg.PhyMode != StaConfig.AdhocMode) &&
- (StaConfig.AdhocMode <= MaxPhyMode))
- {
- // allow dynamic change of "USE OFDM rate or not" in ADHOC mode
- // if setting changed, need to reset current TX rate as well as BEACON frame format
-#ifdef RT30xx
- pAdapter->CommonCfg.PhyMode = StaConfig.AdhocMode;
-#endif
- if (pAdapter->StaCfg.BssType == BSS_ADHOC)
- {
-#ifndef RT30xx
- pAdapter->CommonCfg.PhyMode = StaConfig.AdhocMode;
-#endif
- RTMPSetPhyMode(pAdapter, PhyMode);
- MlmeUpdateTxRates(pAdapter, FALSE, 0);
- MakeIbssBeacon(pAdapter); // re-build BEACON frame
- AsicEnableIbssSync(pAdapter); // copy to on-chip memory
- }
- }
- DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_STA_CONFIG (Burst=%d, Protection=%ld,ShortSlot=%d\n",
- pAdapter->CommonCfg.bEnableTxBurst,
- pAdapter->CommonCfg.UseBGProtection,
- pAdapter->CommonCfg.bUseShortSlotTime));
- }
- break;
- case OID_802_11_DESIRED_RATES:
- if (wrq->u.data.length != sizeof(NDIS_802_11_RATES))
- Status = -EINVAL;
- else
- {
- Status = copy_from_user(&aryRates, wrq->u.data.pointer, wrq->u.data.length);
- NdisZeroMemory(pAdapter->CommonCfg.DesireRate, MAX_LEN_OF_SUPPORTED_RATES);
- NdisMoveMemory(pAdapter->CommonCfg.DesireRate, &aryRates, sizeof(NDIS_802_11_RATES));
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_DESIRED_RATES (%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x)\n",
- pAdapter->CommonCfg.DesireRate[0],pAdapter->CommonCfg.DesireRate[1],
- pAdapter->CommonCfg.DesireRate[2],pAdapter->CommonCfg.DesireRate[3],
- pAdapter->CommonCfg.DesireRate[4],pAdapter->CommonCfg.DesireRate[5],
- pAdapter->CommonCfg.DesireRate[6],pAdapter->CommonCfg.DesireRate[7] ));
- // Changing DesiredRate may affect the MAX TX rate we used to TX frames out
- MlmeUpdateTxRates(pAdapter, FALSE, 0);
- }
- break;
- case RT_OID_802_11_PREAMBLE:
- if (wrq->u.data.length != sizeof(RT_802_11_PREAMBLE))
- Status = -EINVAL;
- else
- {
- Status = copy_from_user(&Preamble, wrq->u.data.pointer, wrq->u.data.length);
- if (Preamble == Rt802_11PreambleShort)
- {
- pAdapter->CommonCfg.TxPreamble = Preamble;
- MlmeSetTxPreamble(pAdapter, Rt802_11PreambleShort);
- }
- else if ((Preamble == Rt802_11PreambleLong) || (Preamble == Rt802_11PreambleAuto))
- {
- // if user wants AUTO, initialize to LONG here, then change according to AP's
- // capability upon association.
- pAdapter->CommonCfg.TxPreamble = Preamble;
- MlmeSetTxPreamble(pAdapter, Rt802_11PreambleLong);
- }
- else
- {
- Status = -EINVAL;
- break;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_PREAMBLE (=%d)\n", Preamble));
- }
- break;
- case OID_802_11_WEP_STATUS:
- if (wrq->u.data.length != sizeof(NDIS_802_11_WEP_STATUS))
- Status = -EINVAL;
- else
- {
- Status = copy_from_user(&WepStatus, wrq->u.data.pointer, wrq->u.data.length);
- // Since TKIP, AES, WEP are all supported. It should not have any invalid setting
- if (WepStatus <= Ndis802_11Encryption3KeyAbsent)
- {
- if (pAdapter->StaCfg.WepStatus != WepStatus)
- {
- // Config has changed
- pAdapter->bConfigChanged = TRUE;
- }
- pAdapter->StaCfg.WepStatus = WepStatus;
- pAdapter->StaCfg.OrigWepStatus = WepStatus;
- pAdapter->StaCfg.PairCipher = WepStatus;
- pAdapter->StaCfg.GroupCipher = WepStatus;
- }
- else
- {
- Status = -EINVAL;
- break;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_WEP_STATUS (=%d)\n",WepStatus));
- }
- break;
- case OID_802_11_AUTHENTICATION_MODE:
- if (wrq->u.data.length != sizeof(NDIS_802_11_AUTHENTICATION_MODE))
- Status = -EINVAL;
- else
- {
- Status = copy_from_user(&AuthMode, wrq->u.data.pointer, wrq->u.data.length);
- if (AuthMode > Ndis802_11AuthModeMax)
- {
- Status = -EINVAL;
- break;
- }
- else
- {
- if (pAdapter->StaCfg.AuthMode != AuthMode)
- {
- // Config has changed
- pAdapter->bConfigChanged = TRUE;
- }
- pAdapter->StaCfg.AuthMode = AuthMode;
- }
- pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_AUTHENTICATION_MODE (=%d) \n",pAdapter->StaCfg.AuthMode));
- }
- break;
- case OID_802_11_INFRASTRUCTURE_MODE:
- if (wrq->u.data.length != sizeof(NDIS_802_11_NETWORK_INFRASTRUCTURE))
- Status = -EINVAL;
- else
- {
- Status = copy_from_user(&BssType, wrq->u.data.pointer, wrq->u.data.length);
-
- if (BssType == Ndis802_11IBSS)
- Set_NetworkType_Proc(pAdapter, "Adhoc");
- else if (BssType == Ndis802_11Infrastructure)
- Set_NetworkType_Proc(pAdapter, "Infra");
- else if (BssType == Ndis802_11Monitor)
- Set_NetworkType_Proc(pAdapter, "Monitor");
- else
- {
- Status = -EINVAL;
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_INFRASTRUCTURE_MODE (unknown)\n"));
- }
- }
- break;
- case OID_802_11_REMOVE_WEP:
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_WEP\n"));
- if (wrq->u.data.length != sizeof(NDIS_802_11_KEY_INDEX))
- {
- Status = -EINVAL;
- }
- else
- {
- KeyIdx = *(NDIS_802_11_KEY_INDEX *) wrq->u.data.pointer;
-
- if (KeyIdx & 0x80000000)
- {
- // Should never set default bit when remove key
- Status = -EINVAL;
- }
- else
- {
- KeyIdx = KeyIdx & 0x0fffffff;
- if (KeyIdx >= 4){
- Status = -EINVAL;
- }
- else
- {
- pAdapter->SharedKey[BSS0][KeyIdx].KeyLen = 0;
- pAdapter->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_NONE;
- AsicRemoveSharedKeyEntry(pAdapter, 0, (UCHAR)KeyIdx);
- }
- }
- }
- break;
- case RT_OID_802_11_RESET_COUNTERS:
- NdisZeroMemory(&pAdapter->WlanCounters, sizeof(COUNTER_802_11));
- NdisZeroMemory(&pAdapter->Counters8023, sizeof(COUNTER_802_3));
- NdisZeroMemory(&pAdapter->RalinkCounters, sizeof(COUNTER_RALINK));
- pAdapter->Counters8023.RxNoBuffer = 0;
- pAdapter->Counters8023.GoodReceives = 0;
- pAdapter->Counters8023.RxNoBuffer = 0;
-#ifdef RT2870
- pAdapter->BulkOutComplete = 0;
- pAdapter->BulkOutCompleteOther= 0;
- pAdapter->BulkOutCompleteCancel = 0;
- pAdapter->BulkOutReq = 0;
- pAdapter->BulkInReq= 0;
- pAdapter->BulkInComplete = 0;
- pAdapter->BulkInCompleteFail = 0;
-#endif // RT2870 //
- DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_RESET_COUNTERS \n"));
- break;
- case OID_802_11_RTS_THRESHOLD:
- if (wrq->u.data.length != sizeof(NDIS_802_11_RTS_THRESHOLD))
- Status = -EINVAL;
- else
- {
- Status = copy_from_user(&RtsThresh, wrq->u.data.pointer, wrq->u.data.length);
- if (RtsThresh > MAX_RTS_THRESHOLD)
- Status = -EINVAL;
- else
- pAdapter->CommonCfg.RtsThreshold = (USHORT)RtsThresh;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_RTS_THRESHOLD (=%ld)\n",RtsThresh));
- break;
- case OID_802_11_FRAGMENTATION_THRESHOLD:
- if (wrq->u.data.length != sizeof(NDIS_802_11_FRAGMENTATION_THRESHOLD))
- Status = -EINVAL;
- else
- {
- Status = copy_from_user(&FragThresh, wrq->u.data.pointer, wrq->u.data.length);
- pAdapter->CommonCfg.bUseZeroToDisableFragment = FALSE;
- if (FragThresh > MAX_FRAG_THRESHOLD || FragThresh < MIN_FRAG_THRESHOLD)
- {
- if (FragThresh == 0)
- {
- pAdapter->CommonCfg.FragmentThreshold = MAX_FRAG_THRESHOLD;
- pAdapter->CommonCfg.bUseZeroToDisableFragment = TRUE;
- }
- else
- Status = -EINVAL;
- }
- else
- pAdapter->CommonCfg.FragmentThreshold = (USHORT)FragThresh;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_FRAGMENTATION_THRESHOLD (=%ld) \n",FragThresh));
- break;
- case OID_802_11_POWER_MODE:
- if (wrq->u.data.length != sizeof(NDIS_802_11_POWER_MODE))
- Status = -EINVAL;
- else
- {
- Status = copy_from_user(&PowerMode, wrq->u.data.pointer, wrq->u.data.length);
- if (PowerMode == Ndis802_11PowerModeCAM)
- Set_PSMode_Proc(pAdapter, "CAM");
- else if (PowerMode == Ndis802_11PowerModeMAX_PSP)
- Set_PSMode_Proc(pAdapter, "Max_PSP");
- else if (PowerMode == Ndis802_11PowerModeFast_PSP)
- Set_PSMode_Proc(pAdapter, "Fast_PSP");
- else if (PowerMode == Ndis802_11PowerModeLegacy_PSP)
- Set_PSMode_Proc(pAdapter, "Legacy_PSP");
- else
- Status = -EINVAL;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_POWER_MODE (=%d)\n",PowerMode));
- break;
- case RT_OID_802_11_TX_POWER_LEVEL_1:
- if (wrq->u.data.length < sizeof(ULONG))
- Status = -EINVAL;
- else
- {
- Status = copy_from_user(&PowerTemp, wrq->u.data.pointer, wrq->u.data.length);
- if (PowerTemp > 100)
- PowerTemp = 0xffffffff; // AUTO
- pAdapter->CommonCfg.TxPowerDefault = PowerTemp; //keep current setting.
- pAdapter->CommonCfg.TxPowerPercentage = pAdapter->CommonCfg.TxPowerDefault;
- DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_TX_POWER_LEVEL_1 (=%ld)\n", pAdapter->CommonCfg.TxPowerPercentage));
- }
- break;
- case OID_802_11_NETWORK_TYPE_IN_USE:
- if (wrq->u.data.length != sizeof(NDIS_802_11_NETWORK_TYPE))
- Status = -EINVAL;
- else
- {
- Status = copy_from_user(&NetType, wrq->u.data.pointer, wrq->u.data.length);
-
- if (NetType == Ndis802_11DS)
- RTMPSetPhyMode(pAdapter, PHY_11B);
- else if (NetType == Ndis802_11OFDM24)
- RTMPSetPhyMode(pAdapter, PHY_11BG_MIXED);
- else if (NetType == Ndis802_11OFDM5)
- RTMPSetPhyMode(pAdapter, PHY_11A);
- else
- Status = -EINVAL;
-
- if (Status == NDIS_STATUS_SUCCESS)
- SetCommonHT(pAdapter);
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_NETWORK_TYPE_IN_USE (=%d)\n",NetType));
- }
- break;
- // For WPA PSK PMK key
- case RT_OID_802_11_ADD_WPA:
- pKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
- if(pKey == NULL)
- {
- Status = -ENOMEM;
- break;
- }
-
- Status = copy_from_user(pKey, wrq->u.data.pointer, wrq->u.data.length);
- if (pKey->Length != wrq->u.data.length)
- {
- Status = -EINVAL;
- DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_WPA, Failed!!\n"));
- }
- else
- {
- if ((pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPAPSK) &&
- (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPA2PSK) &&
- (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPANone) )
- {
- Status = -EOPNOTSUPP;
- DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_WPA, Failed!! [AuthMode != WPAPSK/WPA2PSK/WPANONE]\n"));
- }
- else if ((pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
- (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK) ||
- (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPANone) ) // Only for WPA PSK mode
- {
- NdisMoveMemory(pAdapter->StaCfg.PMK, &pKey->KeyMaterial, pKey->KeyLength);
- // Use RaConfig as PSK agent.
- // Start STA supplicant state machine
- if (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPANone)
- pAdapter->StaCfg.WpaState = SS_START;
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_WPA (id=0x%x, Len=%d-byte)\n", pKey->KeyIndex, pKey->KeyLength));
- }
- else
- {
- pAdapter->StaCfg.WpaState = SS_NOTUSE;
- DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_WPA (id=0x%x, Len=%d-byte)\n", pKey->KeyIndex, pKey->KeyLength));
- }
- }
- kfree(pKey);
- break;
- case OID_802_11_REMOVE_KEY:
- pRemoveKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
- if(pRemoveKey == NULL)
- {
- Status = -ENOMEM;
- break;
- }
-
- Status = copy_from_user(pRemoveKey, wrq->u.data.pointer, wrq->u.data.length);
- if (pRemoveKey->Length != wrq->u.data.length)
- {
- Status = -EINVAL;
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY, Failed!!\n"));
- }
- else
- {
- if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
- {
- RTMPWPARemoveKeyProc(pAdapter, pRemoveKey);
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY, Remove WPA Key!!\n"));
- }
- else
- {
- KeyIdx = pRemoveKey->KeyIndex;
-
- if (KeyIdx & 0x80000000)
- {
- // Should never set default bit when remove key
- Status = -EINVAL;
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY, Failed!!(Should never set default bit when remove key)\n"));
- }
- else
- {
- KeyIdx = KeyIdx & 0x0fffffff;
- if (KeyIdx > 3)
- {
- Status = -EINVAL;
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY, Failed!!(KeyId[%d] out of range)\n", KeyIdx));
- }
- else
- {
- pAdapter->SharedKey[BSS0][KeyIdx].KeyLen = 0;
- pAdapter->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_NONE;
- AsicRemoveSharedKeyEntry(pAdapter, 0, (UCHAR)KeyIdx);
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_REMOVE_KEY (id=0x%x, Len=%d-byte)\n", pRemoveKey->KeyIndex, pRemoveKey->Length));
- }
- }
- }
- }
- kfree(pRemoveKey);
- break;
- // New for WPA
- case OID_802_11_ADD_KEY:
- pKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
- if(pKey == NULL)
- {
- Status = -ENOMEM;
- break;
- }
- Status = copy_from_user(pKey, wrq->u.data.pointer, wrq->u.data.length);
- if (pKey->Length != wrq->u.data.length)
- {
- Status = -EINVAL;
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_KEY, Failed!!\n"));
- }
- else
- {
- RTMPAddKey(pAdapter, pKey);
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_KEY (id=0x%x, Len=%d-byte)\n", pKey->KeyIndex, pKey->KeyLength));
- }
- kfree(pKey);
- break;
- case OID_802_11_CONFIGURATION:
- if (wrq->u.data.length != sizeof(NDIS_802_11_CONFIGURATION))
- Status = -EINVAL;
- else
- {
- Status = copy_from_user(&Config, wrq->u.data.pointer, wrq->u.data.length);
- pConfig = &Config;
-
- if ((pConfig->BeaconPeriod >= 20) && (pConfig->BeaconPeriod <=400))
- pAdapter->CommonCfg.BeaconPeriod = (USHORT) pConfig->BeaconPeriod;
-
- pAdapter->StaActive.AtimWin = (USHORT) pConfig->ATIMWindow;
- MAP_KHZ_TO_CHANNEL_ID(pConfig->DSConfig, pAdapter->CommonCfg.Channel);
- //
- // Save the channel on MlmeAux for CntlOidRTBssidProc used.
- //
- pAdapter->MlmeAux.Channel = pAdapter->CommonCfg.Channel;
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_CONFIGURATION (BeacnPeriod=%ld,AtimW=%ld,Ch=%d)\n",
- pConfig->BeaconPeriod, pConfig->ATIMWindow, pAdapter->CommonCfg.Channel));
- // Config has changed
- pAdapter->bConfigChanged = TRUE;
- }
- break;
- case RT_OID_802_11_SET_HT_PHYMODE:
- if (wrq->u.data.length != sizeof(OID_SET_HT_PHYMODE))
- Status = -EINVAL;
- else
- {
- POID_SET_HT_PHYMODE pHTPhyMode = &HT_PhyMode;
-
- Status = copy_from_user(&HT_PhyMode, wrq->u.data.pointer, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Set::pHTPhyMode (PhyMode = %d,TransmitNo = %d, HtMode = %d, ExtOffset = %d , MCS = %d, BW = %d, STBC = %d, SHORTGI = %d) \n",
- pHTPhyMode->PhyMode, pHTPhyMode->TransmitNo,pHTPhyMode->HtMode,pHTPhyMode->ExtOffset,
- pHTPhyMode->MCS, pHTPhyMode->BW, pHTPhyMode->STBC, pHTPhyMode->SHORTGI));
- if (pAdapter->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
- RTMPSetHT(pAdapter, pHTPhyMode);
- }
- DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_HT_PHYMODE(MCS=%d,BW=%d,SGI=%d,STBC=%d)\n",
- pAdapter->StaCfg.HTPhyMode.field.MCS, pAdapter->StaCfg.HTPhyMode.field.BW, pAdapter->StaCfg.HTPhyMode.field.ShortGI,
- pAdapter->StaCfg.HTPhyMode.field.STBC));
- break;
- case RT_OID_802_11_SET_APSD_SETTING:
- if (wrq->u.data.length != sizeof(ULONG))
- Status = -EINVAL;
- else
- {
- ULONG apsd ;
- Status = copy_from_user(&apsd, wrq->u.data.pointer, wrq->u.data.length);
-
- /*-------------------------------------------------------------------
- |B31~B7 | B6~B5 | B4 | B3 | B2 | B1 | B0 |
- ---------------------------------------------------------------------
- | Rsvd | Max SP Len | AC_VO | AC_VI | AC_BK | AC_BE | APSD Capable |
- ---------------------------------------------------------------------*/
- pAdapter->CommonCfg.bAPSDCapable = (apsd & 0x00000001) ? TRUE : FALSE;
- pAdapter->CommonCfg.bAPSDAC_BE = ((apsd & 0x00000002) >> 1) ? TRUE : FALSE;
- pAdapter->CommonCfg.bAPSDAC_BK = ((apsd & 0x00000004) >> 2) ? TRUE : FALSE;
- pAdapter->CommonCfg.bAPSDAC_VI = ((apsd & 0x00000008) >> 3) ? TRUE : FALSE;
- pAdapter->CommonCfg.bAPSDAC_VO = ((apsd & 0x00000010) >> 4) ? TRUE : FALSE;
- pAdapter->CommonCfg.MaxSPLength = (UCHAR)((apsd & 0x00000060) >> 5);
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_APSD_SETTING (apsd=0x%lx, APSDCap=%d, [BE,BK,VI,VO]=[%d/%d/%d/%d], MaxSPLen=%d)\n", apsd, pAdapter->CommonCfg.bAPSDCapable,
- pAdapter->CommonCfg.bAPSDAC_BE, pAdapter->CommonCfg.bAPSDAC_BK, pAdapter->CommonCfg.bAPSDAC_VI, pAdapter->CommonCfg.bAPSDAC_VO, pAdapter->CommonCfg.MaxSPLength));
- }
- break;
-
- case RT_OID_802_11_SET_APSD_PSM:
- if (wrq->u.data.length != sizeof(ULONG))
- Status = -EINVAL;
- else
- {
- // Driver needs to notify AP when PSM changes
- Status = copy_from_user(&pAdapter->CommonCfg.bAPSDForcePowerSave, wrq->u.data.pointer, wrq->u.data.length);
- if (pAdapter->CommonCfg.bAPSDForcePowerSave != pAdapter->StaCfg.Psm)
- {
- MlmeSetPsmBit(pAdapter, pAdapter->CommonCfg.bAPSDForcePowerSave);
- RTMPSendNullFrame(pAdapter, pAdapter->CommonCfg.TxRate, TRUE);
- }
- DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_APSD_PSM (bAPSDForcePowerSave:%d)\n", pAdapter->CommonCfg.bAPSDForcePowerSave));
- }
- break;
-
- case RT_OID_802_11_SET_WMM:
- if (wrq->u.data.length != sizeof(BOOLEAN))
- Status = -EINVAL;
- else
- {
- Status = copy_from_user(&pAdapter->CommonCfg.bWmmCapable, wrq->u.data.pointer, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_SET_WMM (=%d) \n", pAdapter->CommonCfg.bWmmCapable));
- }
- break;
-
- case OID_802_11_DISASSOCIATE:
- //
- // Set NdisRadioStateOff to TRUE, instead of called MlmeRadioOff.
- // Later on, NDIS_802_11_BSSID_LIST_EX->NumberOfItems should be 0
- // when query OID_802_11_BSSID_LIST.
- //
- // TRUE: NumberOfItems will set to 0.
- // FALSE: NumberOfItems no change.
- //
- pAdapter->CommonCfg.NdisRadioStateOff = TRUE;
- // Set to immediately send the media disconnect event
- pAdapter->MlmeAux.CurrReqIsFromNdis = TRUE;
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_DISASSOCIATE \n"));
-
- if (INFRA_ON(pAdapter))
- {
- if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
- {
- RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
- DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
- }
-
- MlmeEnqueue(pAdapter,
- MLME_CNTL_STATE_MACHINE,
- OID_802_11_DISASSOCIATE,
- 0,
- NULL);
-
- StateMachineTouched = TRUE;
- }
- break;
- case RT_OID_802_11_SET_IMME_BA_CAP:
- if (wrq->u.data.length != sizeof(OID_BACAP_STRUC))
- Status = -EINVAL;
- else
- {
- OID_BACAP_STRUC Orde ;
- Status = copy_from_user(&Orde, wrq->u.data.pointer, wrq->u.data.length);
- if (Orde.Policy > BA_NOTUSE)
- {
- Status = NDIS_STATUS_INVALID_DATA;
- }
- else if (Orde.Policy == BA_NOTUSE)
- {
- pAdapter->CommonCfg.BACapability.field.Policy = BA_NOTUSE;
- pAdapter->CommonCfg.BACapability.field.MpduDensity = Orde.MpduDensity;
- pAdapter->CommonCfg.DesiredHtPhy.MpduDensity = Orde.MpduDensity;
- pAdapter->CommonCfg.DesiredHtPhy.AmsduEnable = Orde.AmsduEnable;
- pAdapter->CommonCfg.DesiredHtPhy.AmsduSize= Orde.AmsduSize;
- pAdapter->CommonCfg.DesiredHtPhy.MimoPs= Orde.MMPSmode;
- pAdapter->CommonCfg.BACapability.field.MMPSmode = Orde.MMPSmode;
- // UPdata to HT IE
- pAdapter->CommonCfg.HtCapability.HtCapInfo.MimoPs = Orde.MMPSmode;
- pAdapter->CommonCfg.HtCapability.HtCapInfo.AMsduSize = Orde.AmsduSize;
- pAdapter->CommonCfg.HtCapability.HtCapParm.MpduDensity = Orde.MpduDensity;
- }
- else
- {
- pAdapter->CommonCfg.BACapability.field.AutoBA = Orde.AutoBA;
- pAdapter->CommonCfg.BACapability.field.Policy = IMMED_BA; // we only support immediate BA.
- pAdapter->CommonCfg.BACapability.field.MpduDensity = Orde.MpduDensity;
- pAdapter->CommonCfg.DesiredHtPhy.MpduDensity = Orde.MpduDensity;
- pAdapter->CommonCfg.DesiredHtPhy.AmsduEnable = Orde.AmsduEnable;
- pAdapter->CommonCfg.DesiredHtPhy.AmsduSize= Orde.AmsduSize;
- pAdapter->CommonCfg.DesiredHtPhy.MimoPs = Orde.MMPSmode;
- pAdapter->CommonCfg.BACapability.field.MMPSmode = Orde.MMPSmode;
-
- // UPdata to HT IE
- pAdapter->CommonCfg.HtCapability.HtCapInfo.MimoPs = Orde.MMPSmode;
- pAdapter->CommonCfg.HtCapability.HtCapInfo.AMsduSize = Orde.AmsduSize;
- pAdapter->CommonCfg.HtCapability.HtCapParm.MpduDensity = Orde.MpduDensity;
-
- if (pAdapter->CommonCfg.BACapability.field.RxBAWinLimit > MAX_RX_REORDERBUF)
- pAdapter->CommonCfg.BACapability.field.RxBAWinLimit = MAX_RX_REORDERBUF;
-
- }
-
- pAdapter->CommonCfg.REGBACapability.word = pAdapter->CommonCfg.BACapability.word;
- DBGPRINT(RT_DEBUG_TRACE, ("Set::(Orde.AutoBA = %d) (Policy=%d)(ReBAWinLimit=%d)(TxBAWinLimit=%d)(AutoMode=%d)\n",Orde.AutoBA, pAdapter->CommonCfg.BACapability.field.Policy,
- pAdapter->CommonCfg.BACapability.field.RxBAWinLimit,pAdapter->CommonCfg.BACapability.field.TxBAWinLimit, pAdapter->CommonCfg.BACapability.field.AutoBA));
- DBGPRINT(RT_DEBUG_TRACE, ("Set::(MimoPs = %d)(AmsduEnable = %d) (AmsduSize=%d)(MpduDensity=%d)\n",pAdapter->CommonCfg.DesiredHtPhy.MimoPs, pAdapter->CommonCfg.DesiredHtPhy.AmsduEnable,
- pAdapter->CommonCfg.DesiredHtPhy.AmsduSize, pAdapter->CommonCfg.DesiredHtPhy.MpduDensity));
- }
-
- break;
- case RT_OID_802_11_ADD_IMME_BA:
- DBGPRINT(RT_DEBUG_TRACE, (" Set :: RT_OID_802_11_ADD_IMME_BA \n"));
- if (wrq->u.data.length != sizeof(OID_ADD_BA_ENTRY))
- Status = -EINVAL;
- else
- {
- UCHAR index;
- OID_ADD_BA_ENTRY BA;
- MAC_TABLE_ENTRY *pEntry;
-
- Status = copy_from_user(&BA, wrq->u.data.pointer, wrq->u.data.length);
- if (BA.TID > 15)
- {
- Status = NDIS_STATUS_INVALID_DATA;
- break;
- }
- else
- {
- //BATableInsertEntry
- //As ad-hoc mode, BA pair is not limited to only BSSID. so add via OID.
- index = BA.TID;
- // in ad hoc mode, when adding BA pair, we should insert this entry into MACEntry too
- pEntry = MacTableLookup(pAdapter, BA.MACAddr);
- if (!pEntry)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("RT_OID_802_11_ADD_IMME_BA. break on no connection.----:%x:%x\n", BA.MACAddr[4], BA.MACAddr[5]));
- break;
- }
- if (BA.IsRecipient == FALSE)
- {
- if (pEntry->bIAmBadAtheros == TRUE)
- pAdapter->CommonCfg.BACapability.field.RxBAWinLimit = 0x10;
-
- BAOriSessionSetUp(pAdapter, pEntry, index, 0, 100, TRUE);
- }
- else
- {
- //BATableInsertEntry(pAdapter, pEntry->Aid, BA.MACAddr, 0, 0xffff, BA.TID, BA.nMSDU, BA.IsRecipient);
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_ADD_IMME_BA. Rec = %d. Mac = %x:%x:%x:%x:%x:%x . \n",
- BA.IsRecipient, BA.MACAddr[0], BA.MACAddr[1], BA.MACAddr[2], BA.MACAddr[2]
- , BA.MACAddr[4], BA.MACAddr[5]));
- }
- }
- break;
-
- case RT_OID_802_11_TEAR_IMME_BA:
- DBGPRINT(RT_DEBUG_TRACE, ("Set :: RT_OID_802_11_TEAR_IMME_BA \n"));
- if (wrq->u.data.length != sizeof(OID_ADD_BA_ENTRY))
- Status = -EINVAL;
- else
- {
- POID_ADD_BA_ENTRY pBA;
- MAC_TABLE_ENTRY *pEntry;
-
- pBA = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-
- if (pBA == NULL)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("Set :: RT_OID_802_11_TEAR_IMME_BA kmalloc() can't allocate enough memory\n"));
- Status = NDIS_STATUS_FAILURE;
- }
- else
- {
- Status = copy_from_user(pBA, wrq->u.data.pointer, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Set :: RT_OID_802_11_TEAR_IMME_BA(TID=%d, bAllTid=%d)\n", pBA->TID, pBA->bAllTid));
-
- if (!pBA->bAllTid && (pBA->TID > NUM_OF_TID))
- {
- Status = NDIS_STATUS_INVALID_DATA;
- break;
- }
-
- if (pBA->IsRecipient == FALSE)
- {
- pEntry = MacTableLookup(pAdapter, pBA->MACAddr);
- DBGPRINT(RT_DEBUG_TRACE, (" pBA->IsRecipient == FALSE\n"));
- if (pEntry)
- {
- DBGPRINT(RT_DEBUG_TRACE, (" pBA->pEntry\n"));
- BAOriSessionTearDown(pAdapter, pEntry->Aid, pBA->TID, FALSE, TRUE);
- }
- else
- DBGPRINT(RT_DEBUG_TRACE, ("Set :: Not found pEntry \n"));
- }
- else
- {
- pEntry = MacTableLookup(pAdapter, pBA->MACAddr);
- if (pEntry)
- {
- BARecSessionTearDown( pAdapter, (UCHAR)pEntry->Aid, pBA->TID, TRUE);
- }
- else
- DBGPRINT(RT_DEBUG_TRACE, ("Set :: Not found pEntry \n"));
- }
- kfree(pBA);
- }
- }
- break;
- // For WPA_SUPPLICANT to set static wep key
- case OID_802_11_ADD_WEP:
- pWepKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-
- if(pWepKey == NULL)
- {
- Status = -ENOMEM;
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP, Failed!!\n"));
- break;
- }
- Status = copy_from_user(pWepKey, wrq->u.data.pointer, wrq->u.data.length);
- if (Status)
- {
- Status = -EINVAL;
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP, Failed (length mismatch)!!\n"));
- }
- else
- {
- KeyIdx = pWepKey->KeyIndex & 0x0fffffff;
- // KeyIdx must be 0 ~ 3
- if (KeyIdx > 4)
- {
- Status = -EINVAL;
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP, Failed (KeyIdx must be smaller than 4)!!\n"));
- }
- else
- {
- UCHAR CipherAlg = 0;
- PUCHAR Key;
-
- // set key material and key length
- NdisZeroMemory(pAdapter->SharedKey[BSS0][KeyIdx].Key, 16);
- pAdapter->SharedKey[BSS0][KeyIdx].KeyLen = (UCHAR) pWepKey->KeyLength;
- NdisMoveMemory(pAdapter->SharedKey[BSS0][KeyIdx].Key, &pWepKey->KeyMaterial, pWepKey->KeyLength);
-
- switch(pWepKey->KeyLength)
- {
- case 5:
- CipherAlg = CIPHER_WEP64;
- break;
- case 13:
- CipherAlg = CIPHER_WEP128;
- break;
- default:
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP, only support CIPHER_WEP64(len:5) & CIPHER_WEP128(len:13)!!\n"));
- Status = -EINVAL;
- break;
- }
- pAdapter->SharedKey[BSS0][KeyIdx].CipherAlg = CipherAlg;
-
- // Default key for tx (shared key)
- if (pWepKey->KeyIndex & 0x80000000)
- {
- // set key material and key length
- NdisZeroMemory(pAdapter->StaCfg.DesireSharedKey[KeyIdx].Key, 16);
- pAdapter->StaCfg.DesireSharedKey[KeyIdx].KeyLen = (UCHAR) pWepKey->KeyLength;
- NdisMoveMemory(pAdapter->StaCfg.DesireSharedKey[KeyIdx].Key, &pWepKey->KeyMaterial, pWepKey->KeyLength);
- pAdapter->StaCfg.DesireSharedKeyId = KeyIdx;
- pAdapter->StaCfg.DesireSharedKey[KeyIdx].CipherAlg = CipherAlg;
- pAdapter->StaCfg.DefaultKeyId = (UCHAR) KeyIdx;
- }
-#ifndef RT30xx
- if ((pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE) &&
- (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA))
- {
- Key = pWepKey->KeyMaterial;
-
- // Set Group key material to Asic
- AsicAddSharedKeyEntry(pAdapter, BSS0, KeyIdx, CipherAlg, Key, NULL, NULL);
-
- // Update WCID attribute table and IVEIV table for this group key table
- RTMPAddWcidAttributeEntry(pAdapter, BSS0, KeyIdx, CipherAlg, NULL);
-
- STA_PORT_SECURED(pAdapter);
-
- // Indicate Connected for GUI
- pAdapter->IndicateMediaState = NdisMediaStateConnected;
- }
- else if (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED)
-#endif
-#ifdef RT30xx
- if (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED)
-#endif
- {
- Key = pAdapter->SharedKey[BSS0][KeyIdx].Key;
-
- // Set key material and cipherAlg to Asic
- AsicAddSharedKeyEntry(pAdapter, BSS0, KeyIdx, CipherAlg, Key, NULL, NULL);
-
- if (pWepKey->KeyIndex & 0x80000000)
- {
- PMAC_TABLE_ENTRY pEntry = &pAdapter->MacTab.Content[BSSID_WCID];
- // Assign group key info
- RTMPAddWcidAttributeEntry(pAdapter, BSS0, KeyIdx, CipherAlg, NULL);
- // Assign pairwise key info
- RTMPAddWcidAttributeEntry(pAdapter, BSS0, KeyIdx, CipherAlg, pEntry);
- }
- }
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_ADD_WEP (id=0x%x, Len=%d-byte), %s\n", pWepKey->KeyIndex, pWepKey->KeyLength, (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED) ? "Port Secured":"Port NOT Secured"));
- }
- }
- kfree(pWepKey);
- break;
- case OID_SET_COUNTERMEASURES:
- if (wrq->u.data.length != sizeof(int))
- Status = -EINVAL;
- else
- {
- int enabled = 0;
- Status = copy_from_user(&enabled, wrq->u.data.pointer, wrq->u.data.length);
- if (enabled == 1)
- pAdapter->StaCfg.bBlockAssoc = TRUE;
- else
- // WPA MIC error should block association attempt for 60 seconds
- pAdapter->StaCfg.bBlockAssoc = FALSE;
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_SET_COUNTERMEASURES bBlockAssoc=%s\n", pAdapter->StaCfg.bBlockAssoc ? "TRUE":"FALSE"));
- }
- break;
- case RT_OID_WPA_SUPPLICANT_SUPPORT:
- if (wrq->u.data.length != sizeof(UCHAR))
- Status = -EINVAL;
- else
- {
- Status = copy_from_user(&wpa_supplicant_enable, wrq->u.data.pointer, wrq->u.data.length);
- pAdapter->StaCfg.WpaSupplicantUP = wpa_supplicant_enable;
- DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_WPA_SUPPLICANT_SUPPORT (=%d)\n", pAdapter->StaCfg.WpaSupplicantUP));
- }
- break;
- case OID_802_11_DEAUTHENTICATION:
- if (wrq->u.data.length != sizeof(MLME_DEAUTH_REQ_STRUCT))
- Status = -EINVAL;
- else
- {
- MLME_DEAUTH_REQ_STRUCT *pInfo;
- MLME_QUEUE_ELEM *MsgElem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
-
- pInfo = (MLME_DEAUTH_REQ_STRUCT *) MsgElem->Msg;
- Status = copy_from_user(pInfo, wrq->u.data.pointer, wrq->u.data.length);
- MlmeDeauthReqAction(pAdapter, MsgElem);
- kfree(MsgElem);
-
- if (INFRA_ON(pAdapter))
- {
- LinkDown(pAdapter, FALSE);
- pAdapter->Mlme.AssocMachine.CurrState = ASSOC_IDLE;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_DEAUTHENTICATION (Reason=%d)\n", pInfo->Reason));
- }
- break;
- case OID_802_11_DROP_UNENCRYPTED:
- if (wrq->u.data.length != sizeof(int))
- Status = -EINVAL;
- else
- {
- int enabled = 0;
- Status = copy_from_user(&enabled, wrq->u.data.pointer, wrq->u.data.length);
- if (enabled == 1)
- pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
- else
- pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED;
- NdisAcquireSpinLock(&pAdapter->MacTabLock);
- pAdapter->MacTab.Content[BSSID_WCID].PortSecured = pAdapter->StaCfg.PortSecured;
- NdisReleaseSpinLock(&pAdapter->MacTabLock);
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_DROP_UNENCRYPTED (=%d)\n", enabled));
- }
- break;
- case OID_802_11_SET_IEEE8021X:
- if (wrq->u.data.length != sizeof(BOOLEAN))
- Status = -EINVAL;
- else
- {
- Status = copy_from_user(&IEEE8021xState, wrq->u.data.pointer, wrq->u.data.length);
- pAdapter->StaCfg.IEEE8021X = IEEE8021xState;
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_SET_IEEE8021X (=%d)\n", IEEE8021xState));
- }
- break;
- case OID_802_11_SET_IEEE8021X_REQUIRE_KEY:
- if (wrq->u.data.length != sizeof(BOOLEAN))
- Status = -EINVAL;
- else
- {
- Status = copy_from_user(&IEEE8021x_required_keys, wrq->u.data.pointer, wrq->u.data.length);
- pAdapter->StaCfg.IEEE8021x_required_keys = IEEE8021x_required_keys;
- DBGPRINT(RT_DEBUG_TRACE, ("Set::OID_802_11_SET_IEEE8021X_REQUIRE_KEY (%d)\n", IEEE8021x_required_keys));
- }
- break;
- case OID_802_11_PMKID:
- pPmkId = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
-
- if(pPmkId == NULL) {
- Status = -ENOMEM;
- break;
- }
- Status = copy_from_user(pPmkId, wrq->u.data.pointer, wrq->u.data.length);
-
- // check the PMKID information
- if (pPmkId->BSSIDInfoCount == 0)
- NdisZeroMemory(pAdapter->StaCfg.SavedPMK, sizeof(BSSID_INFO)*PMKID_NO);
- else
- {
- PBSSID_INFO pBssIdInfo;
- UINT BssIdx;
- UINT CachedIdx;
-
- for (BssIdx = 0; BssIdx < pPmkId->BSSIDInfoCount; BssIdx++)
- {
- // point to the indexed BSSID_INFO structure
- pBssIdInfo = (PBSSID_INFO) ((PUCHAR) pPmkId + 2 * sizeof(UINT) + BssIdx * sizeof(BSSID_INFO));
- // Find the entry in the saved data base.
- for (CachedIdx = 0; CachedIdx < pAdapter->StaCfg.SavedPMKNum; CachedIdx++)
- {
- // compare the BSSID
- if (NdisEqualMemory(pBssIdInfo->BSSID, pAdapter->StaCfg.SavedPMK[CachedIdx].BSSID, sizeof(NDIS_802_11_MAC_ADDRESS)))
- break;
- }
-
- // Found, replace it
- if (CachedIdx < PMKID_NO)
- {
- DBGPRINT(RT_DEBUG_OFF, ("Update OID_802_11_PMKID, idx = %d\n", CachedIdx));
- NdisMoveMemory(&pAdapter->StaCfg.SavedPMK[CachedIdx], pBssIdInfo, sizeof(BSSID_INFO));
- pAdapter->StaCfg.SavedPMKNum++;
- }
- // Not found, replace the last one
- else
- {
- // Randomly replace one
- CachedIdx = (pBssIdInfo->BSSID[5] % PMKID_NO);
- DBGPRINT(RT_DEBUG_OFF, ("Update OID_802_11_PMKID, idx = %d\n", CachedIdx));
- NdisMoveMemory(&pAdapter->StaCfg.SavedPMK[CachedIdx], pBssIdInfo, sizeof(BSSID_INFO));
- }
- }
- }
- if(pPmkId)
- kfree(pPmkId);
- break;
- default:
- DBGPRINT(RT_DEBUG_TRACE, ("Set::unknown IOCTL's subcmd = 0x%08x\n", cmd));
- Status = -EOPNOTSUPP;
- break;
- }
-
-
- return Status;
-}
-
-INT RTMPQueryInformation(
- IN PRTMP_ADAPTER pAdapter,
- IN OUT struct ifreq *rq,
- IN INT cmd)
-{
- struct iwreq *wrq = (struct iwreq *) rq;
- NDIS_802_11_BSSID_LIST_EX *pBssidList = NULL;
- PNDIS_WLAN_BSSID_EX pBss;
- NDIS_802_11_SSID Ssid;
- NDIS_802_11_CONFIGURATION *pConfiguration = NULL;
- RT_802_11_LINK_STATUS *pLinkStatus = NULL;
- RT_802_11_STA_CONFIG *pStaConfig = NULL;
- NDIS_802_11_STATISTICS *pStatistics = NULL;
- NDIS_802_11_RTS_THRESHOLD RtsThresh;
- NDIS_802_11_FRAGMENTATION_THRESHOLD FragThresh;
- NDIS_802_11_POWER_MODE PowerMode;
- NDIS_802_11_NETWORK_INFRASTRUCTURE BssType;
- RT_802_11_PREAMBLE PreamType;
- NDIS_802_11_AUTHENTICATION_MODE AuthMode;
- NDIS_802_11_WEP_STATUS WepStatus;
- NDIS_MEDIA_STATE MediaState;
- ULONG BssBufSize, ulInfo=0, NetworkTypeList[4], apsd = 0;
- USHORT BssLen = 0;
- PUCHAR pBuf = NULL, pPtr;
- INT Status = NDIS_STATUS_SUCCESS;
- UINT we_version_compiled;
- UCHAR i, Padding = 0;
- BOOLEAN RadioState;
- UCHAR driverVersion[8];
- OID_SET_HT_PHYMODE *pHTPhyMode = NULL;
-
- switch(cmd)
- {
- case RT_OID_DEVICE_NAME:
- wrq->u.data.length = sizeof(STA_NIC_DEVICE_NAME);
- Status = copy_to_user(wrq->u.data.pointer, STA_NIC_DEVICE_NAME, wrq->u.data.length);
- break;
- case RT_OID_VERSION_INFO:
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_VERSION_INFO \n"));
- wrq->u.data.length = 8*sizeof(UCHAR);
- sprintf(&driverVersion[0], "%s", STA_DRIVER_VERSION);
- driverVersion[7] = '\0';
- if (copy_to_user(wrq->u.data.pointer, &driverVersion, wrq->u.data.length))
- {
- Status = -EFAULT;
- }
- break;
- case OID_802_11_BSSID_LIST:
- if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
- {
- /*
- * Still scanning, indicate the caller should try again.
- */
- DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BSSID_LIST (Still scanning)\n"));
- return -EAGAIN;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BSSID_LIST (%d BSS returned)\n",pAdapter->ScanTab.BssNr));
- pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE;
- // Claculate total buffer size required
- BssBufSize = sizeof(ULONG);
-
- for (i = 0; i < pAdapter->ScanTab.BssNr; i++)
- {
- // Align pointer to 4 bytes boundary.
- //Padding = 4 - (pAdapter->ScanTab.BssEntry[i].VarIELen & 0x0003);
- //if (Padding == 4)
- // Padding = 0;
- BssBufSize += (sizeof(NDIS_WLAN_BSSID_EX) - 1 + sizeof(NDIS_802_11_FIXED_IEs) + pAdapter->ScanTab.BssEntry[i].VarIELen + Padding);
- }
-
- // For safety issue, we add 256 bytes just in case
- BssBufSize += 256;
- // Allocate the same size as passed from higher layer
- pBuf = kmalloc(BssBufSize, MEM_ALLOC_FLAG);
- if(pBuf == NULL)
- {
- Status = -ENOMEM;
- break;
- }
- // Init 802_11_BSSID_LIST_EX structure
- NdisZeroMemory(pBuf, BssBufSize);
- pBssidList = (PNDIS_802_11_BSSID_LIST_EX) pBuf;
- pBssidList->NumberOfItems = pAdapter->ScanTab.BssNr;
-
- // Calculate total buffer length
- BssLen = 4; // Consist of NumberOfItems
- // Point to start of NDIS_WLAN_BSSID_EX
- // pPtr = pBuf + sizeof(ULONG);
- pPtr = (PUCHAR) &pBssidList->Bssid[0];
- for (i = 0; i < pAdapter->ScanTab.BssNr; i++)
- {
- pBss = (PNDIS_WLAN_BSSID_EX) pPtr;
- NdisMoveMemory(&pBss->MacAddress, &pAdapter->ScanTab.BssEntry[i].Bssid, MAC_ADDR_LEN);
- if ((pAdapter->ScanTab.BssEntry[i].Hidden == 1) && (pAdapter->StaCfg.bShowHiddenSSID == FALSE))
- {
- //
- // We must return this SSID during 4way handshaking, otherwise Aegis will failed to parse WPA infomation
- // and then failed to send EAPOl farame.
- //
- if ((pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA) && (pAdapter->StaCfg.PortSecured != WPA_802_1X_PORT_SECURED))
- {
- pBss->Ssid.SsidLength = pAdapter->ScanTab.BssEntry[i].SsidLen;
- NdisMoveMemory(pBss->Ssid.Ssid, pAdapter->ScanTab.BssEntry[i].Ssid, pAdapter->ScanTab.BssEntry[i].SsidLen);
- }
- else
- pBss->Ssid.SsidLength = 0;
- }
- else
- {
- pBss->Ssid.SsidLength = pAdapter->ScanTab.BssEntry[i].SsidLen;
- NdisMoveMemory(pBss->Ssid.Ssid, pAdapter->ScanTab.BssEntry[i].Ssid, pAdapter->ScanTab.BssEntry[i].SsidLen);
- }
- pBss->Privacy = pAdapter->ScanTab.BssEntry[i].Privacy;
- pBss->Rssi = pAdapter->ScanTab.BssEntry[i].Rssi - pAdapter->BbpRssiToDbmDelta;
- pBss->NetworkTypeInUse = NetworkTypeInUseSanity(&pAdapter->ScanTab.BssEntry[i]);
- pBss->Configuration.Length = sizeof(NDIS_802_11_CONFIGURATION);
- pBss->Configuration.BeaconPeriod = pAdapter->ScanTab.BssEntry[i].BeaconPeriod;
- pBss->Configuration.ATIMWindow = pAdapter->ScanTab.BssEntry[i].AtimWin;
-
- MAP_CHANNEL_ID_TO_KHZ(pAdapter->ScanTab.BssEntry[i].Channel, pBss->Configuration.DSConfig);
-
- if (pAdapter->ScanTab.BssEntry[i].BssType == BSS_INFRA)
- pBss->InfrastructureMode = Ndis802_11Infrastructure;
- else
- pBss->InfrastructureMode = Ndis802_11IBSS;
-
- NdisMoveMemory(pBss->SupportedRates, pAdapter->ScanTab.BssEntry[i].SupRate, pAdapter->ScanTab.BssEntry[i].SupRateLen);
- NdisMoveMemory(pBss->SupportedRates + pAdapter->ScanTab.BssEntry[i].SupRateLen,
- pAdapter->ScanTab.BssEntry[i].ExtRate,
- pAdapter->ScanTab.BssEntry[i].ExtRateLen);
-
- if (pAdapter->ScanTab.BssEntry[i].VarIELen == 0)
- {
- pBss->IELength = sizeof(NDIS_802_11_FIXED_IEs);
- NdisMoveMemory(pBss->IEs, &pAdapter->ScanTab.BssEntry[i].FixIEs, sizeof(NDIS_802_11_FIXED_IEs));
- pPtr = pPtr + sizeof(NDIS_WLAN_BSSID_EX) - 1 + sizeof(NDIS_802_11_FIXED_IEs);
- }
- else
- {
- pBss->IELength = (ULONG)(sizeof(NDIS_802_11_FIXED_IEs) + pAdapter->ScanTab.BssEntry[i].VarIELen);
- pPtr = pPtr + sizeof(NDIS_WLAN_BSSID_EX) - 1 + sizeof(NDIS_802_11_FIXED_IEs);
- NdisMoveMemory(pBss->IEs, &pAdapter->ScanTab.BssEntry[i].FixIEs, sizeof(NDIS_802_11_FIXED_IEs));
- NdisMoveMemory(pBss->IEs + sizeof(NDIS_802_11_FIXED_IEs), pAdapter->ScanTab.BssEntry[i].VarIEs, pAdapter->ScanTab.BssEntry[i].VarIELen);
- pPtr += pAdapter->ScanTab.BssEntry[i].VarIELen;
- }
- pBss->Length = (ULONG)(sizeof(NDIS_WLAN_BSSID_EX) - 1 + sizeof(NDIS_802_11_FIXED_IEs) + pAdapter->ScanTab.BssEntry[i].VarIELen + Padding);
-
-#if WIRELESS_EXT < 17
- if ((BssLen + pBss->Length) < wrq->u.data.length)
- BssLen += pBss->Length;
- else
- {
- pBssidList->NumberOfItems = i;
- break;
- }
-#else
- BssLen += pBss->Length;
-#endif
- }
-
-#if WIRELESS_EXT < 17
- wrq->u.data.length = BssLen;
-#else
- if (BssLen > wrq->u.data.length)
- {
- kfree(pBssidList);
- return -E2BIG;
- }
- else
- wrq->u.data.length = BssLen;
-#endif
- Status = copy_to_user(wrq->u.data.pointer, pBssidList, BssLen);
- kfree(pBssidList);
- break;
- case OID_802_3_CURRENT_ADDRESS:
- wrq->u.data.length = MAC_ADDR_LEN;
- Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CurrentAddress, wrq->u.data.length);
- break;
- case OID_GEN_MEDIA_CONNECT_STATUS:
- if (pAdapter->IndicateMediaState == NdisMediaStateConnected)
- MediaState = NdisMediaStateConnected;
- else
- MediaState = NdisMediaStateDisconnected;
-
- wrq->u.data.length = sizeof(NDIS_MEDIA_STATE);
- Status = copy_to_user(wrq->u.data.pointer, &MediaState, wrq->u.data.length);
- break;
- case OID_802_11_BSSID:
- if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter))
- {
- Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.Bssid, sizeof(NDIS_802_11_MAC_ADDRESS));
-
- }
- else
- {
- DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BSSID(=EMPTY)\n"));
- Status = -ENOTCONN;
- }
- break;
- case OID_802_11_SSID:
- NdisZeroMemory(&Ssid, sizeof(NDIS_802_11_SSID));
- NdisZeroMemory(Ssid.Ssid, MAX_LEN_OF_SSID);
- Ssid.SsidLength = pAdapter->CommonCfg.SsidLen;
- memcpy(Ssid.Ssid, pAdapter->CommonCfg.Ssid, Ssid.SsidLength);
- wrq->u.data.length = sizeof(NDIS_802_11_SSID);
- Status = copy_to_user(wrq->u.data.pointer, &Ssid, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_SSID (Len=%d, ssid=%s)\n", Ssid.SsidLength,Ssid.Ssid));
- break;
- case RT_OID_802_11_QUERY_LINK_STATUS:
- pLinkStatus = (RT_802_11_LINK_STATUS *) kmalloc(sizeof(RT_802_11_LINK_STATUS), MEM_ALLOC_FLAG);
- if (pLinkStatus)
- {
- pLinkStatus->CurrTxRate = RateIdTo500Kbps[pAdapter->CommonCfg.TxRate]; // unit : 500 kbps
- pLinkStatus->ChannelQuality = pAdapter->Mlme.ChannelQuality;
- pLinkStatus->RxByteCount = pAdapter->RalinkCounters.ReceivedByteCount;
- pLinkStatus->TxByteCount = pAdapter->RalinkCounters.TransmittedByteCount;
- pLinkStatus->CentralChannel = pAdapter->CommonCfg.CentralChannel;
- wrq->u.data.length = sizeof(RT_802_11_LINK_STATUS);
- Status = copy_to_user(wrq->u.data.pointer, pLinkStatus, wrq->u.data.length);
- kfree(pLinkStatus);
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_LINK_STATUS\n"));
- }
- else
- {
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_LINK_STATUS(kmalloc failed)\n"));
- Status = -EFAULT;
- }
- break;
- case OID_802_11_CONFIGURATION:
- pConfiguration = (NDIS_802_11_CONFIGURATION *) kmalloc(sizeof(NDIS_802_11_CONFIGURATION), MEM_ALLOC_FLAG);
- if (pConfiguration)
- {
- pConfiguration->Length = sizeof(NDIS_802_11_CONFIGURATION);
- pConfiguration->BeaconPeriod = pAdapter->CommonCfg.BeaconPeriod;
- pConfiguration->ATIMWindow = pAdapter->StaActive.AtimWin;
- MAP_CHANNEL_ID_TO_KHZ(pAdapter->CommonCfg.Channel, pConfiguration->DSConfig);
- wrq->u.data.length = sizeof(NDIS_802_11_CONFIGURATION);
- Status = copy_to_user(wrq->u.data.pointer, pConfiguration, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_CONFIGURATION(BeaconPeriod=%ld,AtimW=%ld,Channel=%d) \n",
- pConfiguration->BeaconPeriod, pConfiguration->ATIMWindow, pAdapter->CommonCfg.Channel));
- kfree(pConfiguration);
- }
- else
- {
- DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_CONFIGURATION(kmalloc failed)\n"));
- Status = -EFAULT;
- }
- break;
- case RT_OID_802_11_SNR_0:
- if ((pAdapter->StaCfg.LastSNR0 > 0))
- {
- ulInfo = ((0xeb - pAdapter->StaCfg.LastSNR0) * 3) / 16 ;
- wrq->u.data.length = sizeof(ulInfo);
- Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_SNR_0(0x=%lx)\n", ulInfo));
- }
- else
- Status = -EFAULT;
- break;
- case RT_OID_802_11_SNR_1:
- if ((pAdapter->Antenna.field.RxPath > 1) &&
- (pAdapter->StaCfg.LastSNR1 > 0))
- {
- ulInfo = ((0xeb - pAdapter->StaCfg.LastSNR1) * 3) / 16 ;
- wrq->u.data.length = sizeof(ulInfo);
- Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE,("Query::RT_OID_802_11_SNR_1(0x=%lx)\n",ulInfo));
- }
- else
- Status = -EFAULT;
- DBGPRINT(RT_DEBUG_TRACE,("Query::RT_OID_802_11_SNR_1(pAdapter->StaCfg.LastSNR1=%d)\n",pAdapter->StaCfg.LastSNR1));
- break;
- case OID_802_11_RSSI_TRIGGER:
- ulInfo = pAdapter->StaCfg.RssiSample.LastRssi0 - pAdapter->BbpRssiToDbmDelta;
- wrq->u.data.length = sizeof(ulInfo);
- Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_RSSI_TRIGGER(=%ld)\n", ulInfo));
- break;
- case OID_802_11_RSSI:
- case RT_OID_802_11_RSSI:
- ulInfo = pAdapter->StaCfg.RssiSample.LastRssi0;
- wrq->u.data.length = sizeof(ulInfo);
- Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
- break;
- case RT_OID_802_11_RSSI_1:
- ulInfo = pAdapter->StaCfg.RssiSample.LastRssi1;
- wrq->u.data.length = sizeof(ulInfo);
- Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
- break;
- case RT_OID_802_11_RSSI_2:
- ulInfo = pAdapter->StaCfg.RssiSample.LastRssi2;
- wrq->u.data.length = sizeof(ulInfo);
- Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
- break;
- case OID_802_11_STATISTICS:
- pStatistics = (NDIS_802_11_STATISTICS *) kmalloc(sizeof(NDIS_802_11_STATISTICS), MEM_ALLOC_FLAG);
- if (pStatistics)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_STATISTICS \n"));
- // add the most up-to-date h/w raw counters into software counters
- NICUpdateRawCounters(pAdapter);
-
- // Sanity check for calculation of sucessful count
- if (pAdapter->WlanCounters.TransmittedFragmentCount.QuadPart < pAdapter->WlanCounters.RetryCount.QuadPart)
- pAdapter->WlanCounters.TransmittedFragmentCount.QuadPart = pAdapter->WlanCounters.RetryCount.QuadPart;
-
- pStatistics->TransmittedFragmentCount.QuadPart = pAdapter->WlanCounters.TransmittedFragmentCount.QuadPart;
- pStatistics->MulticastTransmittedFrameCount.QuadPart = pAdapter->WlanCounters.MulticastTransmittedFrameCount.QuadPart;
- pStatistics->FailedCount.QuadPart = pAdapter->WlanCounters.FailedCount.QuadPart;
- pStatistics->RetryCount.QuadPart = pAdapter->WlanCounters.RetryCount.QuadPart;
- pStatistics->MultipleRetryCount.QuadPart = pAdapter->WlanCounters.MultipleRetryCount.QuadPart;
- pStatistics->RTSSuccessCount.QuadPart = pAdapter->WlanCounters.RTSSuccessCount.QuadPart;
- pStatistics->RTSFailureCount.QuadPart = pAdapter->WlanCounters.RTSFailureCount.QuadPart;
- pStatistics->ACKFailureCount.QuadPart = pAdapter->WlanCounters.ACKFailureCount.QuadPart;
- pStatistics->FrameDuplicateCount.QuadPart = pAdapter->WlanCounters.FrameDuplicateCount.QuadPart;
- pStatistics->ReceivedFragmentCount.QuadPart = pAdapter->WlanCounters.ReceivedFragmentCount.QuadPart;
- pStatistics->MulticastReceivedFrameCount.QuadPart = pAdapter->WlanCounters.MulticastReceivedFrameCount.QuadPart;
-#ifdef DBG
- pStatistics->FCSErrorCount = pAdapter->RalinkCounters.RealFcsErrCount;
-#else
- pStatistics->FCSErrorCount.QuadPart = pAdapter->WlanCounters.FCSErrorCount.QuadPart;
- pStatistics->FrameDuplicateCount.u.LowPart = pAdapter->WlanCounters.FrameDuplicateCount.u.LowPart / 100;
-#endif
- wrq->u.data.length = sizeof(NDIS_802_11_STATISTICS);
- Status = copy_to_user(wrq->u.data.pointer, pStatistics, wrq->u.data.length);
- kfree(pStatistics);
- }
- else
- {
- DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_STATISTICS(kmalloc failed)\n"));
- Status = -EFAULT;
- }
- break;
- case OID_GEN_RCV_OK:
- ulInfo = pAdapter->Counters8023.GoodReceives;
- wrq->u.data.length = sizeof(ulInfo);
- Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
- break;
- case OID_GEN_RCV_NO_BUFFER:
- ulInfo = pAdapter->Counters8023.RxNoBuffer;
- wrq->u.data.length = sizeof(ulInfo);
- Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
- break;
- case RT_OID_802_11_PHY_MODE:
- ulInfo = (ULONG)pAdapter->CommonCfg.PhyMode;
- wrq->u.data.length = sizeof(ulInfo);
- Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PHY_MODE (=%ld)\n", ulInfo));
- break;
- case RT_OID_802_11_STA_CONFIG:
- pStaConfig = (RT_802_11_STA_CONFIG *) kmalloc(sizeof(RT_802_11_STA_CONFIG), MEM_ALLOC_FLAG);
- if (pStaConfig)
- {
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_STA_CONFIG\n"));
- pStaConfig->EnableTxBurst = pAdapter->CommonCfg.bEnableTxBurst;
- pStaConfig->EnableTurboRate = 0;
- pStaConfig->UseBGProtection = pAdapter->CommonCfg.UseBGProtection;
- pStaConfig->UseShortSlotTime = pAdapter->CommonCfg.bUseShortSlotTime;
- //pStaConfig->AdhocMode = pAdapter->StaCfg.AdhocMode;
- pStaConfig->HwRadioStatus = (pAdapter->StaCfg.bHwRadio == TRUE) ? 1 : 0;
- pStaConfig->Rsv1 = 0;
- pStaConfig->SystemErrorBitmap = pAdapter->SystemErrorBitmap;
- wrq->u.data.length = sizeof(RT_802_11_STA_CONFIG);
- Status = copy_to_user(wrq->u.data.pointer, pStaConfig, wrq->u.data.length);
- kfree(pStaConfig);
- }
- else
- {
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_STA_CONFIG(kmalloc failed)\n"));
- Status = -EFAULT;
- }
- break;
- case OID_802_11_RTS_THRESHOLD:
- RtsThresh = pAdapter->CommonCfg.RtsThreshold;
- wrq->u.data.length = sizeof(RtsThresh);
- Status = copy_to_user(wrq->u.data.pointer, &RtsThresh, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_RTS_THRESHOLD(=%ld)\n", RtsThresh));
- break;
- case OID_802_11_FRAGMENTATION_THRESHOLD:
- FragThresh = pAdapter->CommonCfg.FragmentThreshold;
- if (pAdapter->CommonCfg.bUseZeroToDisableFragment == TRUE)
- FragThresh = 0;
- wrq->u.data.length = sizeof(FragThresh);
- Status = copy_to_user(wrq->u.data.pointer, &FragThresh, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_FRAGMENTATION_THRESHOLD(=%ld)\n", FragThresh));
- break;
- case OID_802_11_POWER_MODE:
- PowerMode = pAdapter->StaCfg.WindowsPowerMode;
- wrq->u.data.length = sizeof(PowerMode);
- Status = copy_to_user(wrq->u.data.pointer, &PowerMode, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_POWER_MODE(=%d)\n", PowerMode));
- break;
- case RT_OID_802_11_RADIO:
- RadioState = (BOOLEAN) pAdapter->StaCfg.bSwRadio;
- wrq->u.data.length = sizeof(RadioState);
- Status = copy_to_user(wrq->u.data.pointer, &RadioState, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_RADIO (=%d)\n", RadioState));
- break;
- case OID_802_11_INFRASTRUCTURE_MODE:
- if (pAdapter->StaCfg.BssType == BSS_ADHOC)
- BssType = Ndis802_11IBSS;
- else if (pAdapter->StaCfg.BssType == BSS_INFRA)
- BssType = Ndis802_11Infrastructure;
- else if (pAdapter->StaCfg.BssType == BSS_MONITOR)
- BssType = Ndis802_11Monitor;
- else
- BssType = Ndis802_11AutoUnknown;
-
- wrq->u.data.length = sizeof(BssType);
- Status = copy_to_user(wrq->u.data.pointer, &BssType, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_INFRASTRUCTURE_MODE(=%d)\n", BssType));
- break;
- case RT_OID_802_11_PREAMBLE:
- PreamType = pAdapter->CommonCfg.TxPreamble;
- wrq->u.data.length = sizeof(PreamType);
- Status = copy_to_user(wrq->u.data.pointer, &PreamType, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PREAMBLE(=%d)\n", PreamType));
- break;
- case OID_802_11_AUTHENTICATION_MODE:
- AuthMode = pAdapter->StaCfg.AuthMode;
- wrq->u.data.length = sizeof(AuthMode);
- Status = copy_to_user(wrq->u.data.pointer, &AuthMode, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_AUTHENTICATION_MODE(=%d)\n", AuthMode));
- break;
- case OID_802_11_WEP_STATUS:
- WepStatus = pAdapter->StaCfg.WepStatus;
- wrq->u.data.length = sizeof(WepStatus);
- Status = copy_to_user(wrq->u.data.pointer, &WepStatus, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_WEP_STATUS(=%d)\n", WepStatus));
- break;
- case OID_802_11_TX_POWER_LEVEL:
- wrq->u.data.length = sizeof(ULONG);
- Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.TxPower, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_TX_POWER_LEVEL %x\n",pAdapter->CommonCfg.TxPower));
- break;
- case RT_OID_802_11_TX_POWER_LEVEL_1:
- wrq->u.data.length = sizeof(ULONG);
- Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.TxPowerPercentage, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_TX_POWER_LEVEL_1 (=%ld)\n", pAdapter->CommonCfg.TxPowerPercentage));
- break;
- case OID_802_11_NETWORK_TYPES_SUPPORTED:
- if ((pAdapter->RfIcType == RFIC_2850) || (pAdapter->RfIcType == RFIC_2750))
- {
- NetworkTypeList[0] = 3; // NumberOfItems = 3
- NetworkTypeList[1] = Ndis802_11DS; // NetworkType[1] = 11b
- NetworkTypeList[2] = Ndis802_11OFDM24; // NetworkType[2] = 11g
- NetworkTypeList[3] = Ndis802_11OFDM5; // NetworkType[3] = 11a
- wrq->u.data.length = 16;
- Status = copy_to_user(wrq->u.data.pointer, &NetworkTypeList[0], wrq->u.data.length);
- }
- else
- {
- NetworkTypeList[0] = 2; // NumberOfItems = 2
- NetworkTypeList[1] = Ndis802_11DS; // NetworkType[1] = 11b
- NetworkTypeList[2] = Ndis802_11OFDM24; // NetworkType[2] = 11g
- wrq->u.data.length = 12;
- Status = copy_to_user(wrq->u.data.pointer, &NetworkTypeList[0], wrq->u.data.length);
- }
- DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_NETWORK_TYPES_SUPPORTED\n"));
- break;
- case OID_802_11_NETWORK_TYPE_IN_USE:
- wrq->u.data.length = sizeof(ULONG);
- if (pAdapter->CommonCfg.PhyMode == PHY_11A)
- ulInfo = Ndis802_11OFDM5;
- else if ((pAdapter->CommonCfg.PhyMode == PHY_11BG_MIXED) || (pAdapter->CommonCfg.PhyMode == PHY_11G))
- ulInfo = Ndis802_11OFDM24;
- else
- ulInfo = Ndis802_11DS;
- Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
- break;
- case RT_OID_802_11_QUERY_LAST_RX_RATE:
- ulInfo = (ULONG)pAdapter->LastRxRate;
- wrq->u.data.length = sizeof(ulInfo);
- Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_LAST_RX_RATE (=%ld)\n", ulInfo));
- break;
- case RT_OID_802_11_QUERY_LAST_TX_RATE:
- //ulInfo = (ULONG)pAdapter->LastTxRate;
- ulInfo = (ULONG)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.word;
- wrq->u.data.length = sizeof(ulInfo);
- Status = copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_LAST_TX_RATE (=%lx)\n", ulInfo));
- break;
- case RT_OID_802_11_QUERY_EEPROM_VERSION:
- wrq->u.data.length = sizeof(ULONG);
- Status = copy_to_user(wrq->u.data.pointer, &pAdapter->EepromVersion, wrq->u.data.length);
- break;
- case RT_OID_802_11_QUERY_FIRMWARE_VERSION:
- wrq->u.data.length = sizeof(ULONG);
- Status = copy_to_user(wrq->u.data.pointer, &pAdapter->FirmwareVersion, wrq->u.data.length);
- break;
- case RT_OID_802_11_QUERY_NOISE_LEVEL:
- wrq->u.data.length = sizeof(UCHAR);
- Status = copy_to_user(wrq->u.data.pointer, &pAdapter->BbpWriteLatch[66], wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_NOISE_LEVEL (=%d)\n", pAdapter->BbpWriteLatch[66]));
- break;
- case RT_OID_802_11_EXTRA_INFO:
- wrq->u.data.length = sizeof(ULONG);
- Status = copy_to_user(wrq->u.data.pointer, &pAdapter->ExtraInfo, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_EXTRA_INFO (=%ld)\n", pAdapter->ExtraInfo));
- break;
- case RT_OID_WE_VERSION_COMPILED:
- wrq->u.data.length = sizeof(UINT);
- we_version_compiled = WIRELESS_EXT;
- Status = copy_to_user(wrq->u.data.pointer, &we_version_compiled, wrq->u.data.length);
- break;
- case RT_OID_802_11_QUERY_APSD_SETTING:
- apsd = (pAdapter->CommonCfg.bAPSDCapable | (pAdapter->CommonCfg.bAPSDAC_BE << 1) | (pAdapter->CommonCfg.bAPSDAC_BK << 2)
- | (pAdapter->CommonCfg.bAPSDAC_VI << 3) | (pAdapter->CommonCfg.bAPSDAC_VO << 4) | (pAdapter->CommonCfg.MaxSPLength << 5));
-
- wrq->u.data.length = sizeof(ULONG);
- Status = copy_to_user(wrq->u.data.pointer, &apsd, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_APSD_SETTING (=0x%lx,APSDCap=%d,AC_BE=%d,AC_BK=%d,AC_VI=%d,AC_VO=%d,MAXSPLen=%d)\n",
- apsd,pAdapter->CommonCfg.bAPSDCapable,pAdapter->CommonCfg.bAPSDAC_BE,pAdapter->CommonCfg.bAPSDAC_BK,pAdapter->CommonCfg.bAPSDAC_VI,pAdapter->CommonCfg.bAPSDAC_VO,pAdapter->CommonCfg.MaxSPLength));
- break;
- case RT_OID_802_11_QUERY_APSD_PSM:
- wrq->u.data.length = sizeof(ULONG);
- Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.bAPSDForcePowerSave, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_APSD_PSM (=%d)\n", pAdapter->CommonCfg.bAPSDForcePowerSave));
- break;
- case RT_OID_802_11_QUERY_WMM:
- wrq->u.data.length = sizeof(BOOLEAN);
- Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.bWmmCapable, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_WMM (=%d)\n", pAdapter->CommonCfg.bWmmCapable));
- break;
- case RT_OID_NEW_DRIVER:
- {
- UCHAR enabled = 1;
- wrq->u.data.length = sizeof(UCHAR);
- Status = copy_to_user(wrq->u.data.pointer, &enabled, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_NEW_DRIVER (=%d)\n", enabled));
- }
- break;
- case RT_OID_WPA_SUPPLICANT_SUPPORT:
- wrq->u.data.length = sizeof(UCHAR);
- Status = copy_to_user(wrq->u.data.pointer, &pAdapter->StaCfg.WpaSupplicantUP, wrq->u.data.length);
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_WPA_SUPPLICANT_SUPPORT (=%d)\n", pAdapter->StaCfg.WpaSupplicantUP));
- break;
- case RT_OID_DRIVER_DEVICE_NAME:
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_DRIVER_DEVICE_NAME \n"));
- wrq->u.data.length = 16;
- if (copy_to_user(wrq->u.data.pointer, pAdapter->StaCfg.dev_name, wrq->u.data.length))
- {
- Status = -EFAULT;
- }
- break;
- case RT_OID_802_11_QUERY_HT_PHYMODE:
- pHTPhyMode = (OID_SET_HT_PHYMODE *) kmalloc(sizeof(OID_SET_HT_PHYMODE), MEM_ALLOC_FLAG);
- if (pHTPhyMode)
- {
- pHTPhyMode->PhyMode = pAdapter->CommonCfg.PhyMode;
- pHTPhyMode->HtMode = (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE;
- pHTPhyMode->BW = (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.BW;
- pHTPhyMode->MCS= (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.MCS;
- pHTPhyMode->SHORTGI= (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.ShortGI;
- pHTPhyMode->STBC= (UCHAR)pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.field.STBC;
-
- pHTPhyMode->ExtOffset = ((pAdapter->CommonCfg.CentralChannel < pAdapter->CommonCfg.Channel) ? (EXTCHA_BELOW) : (EXTCHA_ABOVE));
- wrq->u.data.length = sizeof(OID_SET_HT_PHYMODE);
- if (copy_to_user(wrq->u.data.pointer, pHTPhyMode, wrq->u.data.length))
- {
- Status = -EFAULT;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_HT_PHYMODE (PhyMode = %d, MCS =%d, BW = %d, STBC = %d, ExtOffset=%d)\n",
- pHTPhyMode->HtMode, pHTPhyMode->MCS, pHTPhyMode->BW, pHTPhyMode->STBC, pHTPhyMode->ExtOffset));
- DBGPRINT(RT_DEBUG_TRACE, (" MlmeUpdateTxRates (.word = %x )\n", pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.word));
- }
- else
- {
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_STA_CONFIG(kmalloc failed)\n"));
- Status = -EFAULT;
- }
- break;
- case RT_OID_802_11_COUNTRY_REGION:
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_COUNTRY_REGION \n"));
- wrq->u.data.length = sizeof(ulInfo);
- ulInfo = pAdapter->CommonCfg.CountryRegionForABand;
- ulInfo = (ulInfo << 8)|(pAdapter->CommonCfg.CountryRegion);
- if (copy_to_user(wrq->u.data.pointer, &ulInfo, wrq->u.data.length))
- {
- Status = -EFAULT;
- }
- break;
- case RT_OID_802_11_QUERY_DAT_HT_PHYMODE:
- pHTPhyMode = (OID_SET_HT_PHYMODE *) kmalloc(sizeof(OID_SET_HT_PHYMODE), MEM_ALLOC_FLAG);
- if (pHTPhyMode)
- {
- pHTPhyMode->PhyMode = pAdapter->CommonCfg.PhyMode;
- pHTPhyMode->HtMode = (UCHAR)pAdapter->CommonCfg.RegTransmitSetting.field.HTMODE;
- pHTPhyMode->BW = (UCHAR)pAdapter->CommonCfg.RegTransmitSetting.field.BW;
- pHTPhyMode->MCS= (UCHAR)pAdapter->StaCfg.DesiredTransmitSetting.field.MCS;
- pHTPhyMode->SHORTGI= (UCHAR)pAdapter->CommonCfg.RegTransmitSetting.field.ShortGI;
- pHTPhyMode->STBC= (UCHAR)pAdapter->CommonCfg.RegTransmitSetting.field.STBC;
-
- wrq->u.data.length = sizeof(OID_SET_HT_PHYMODE);
- if (copy_to_user(wrq->u.data.pointer, pHTPhyMode, wrq->u.data.length))
- {
- Status = -EFAULT;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_HT_PHYMODE (PhyMode = %d, MCS =%d, BW = %d, STBC = %d, ExtOffset=%d)\n",
- pHTPhyMode->HtMode, pHTPhyMode->MCS, pHTPhyMode->BW, pHTPhyMode->STBC, pHTPhyMode->ExtOffset));
- DBGPRINT(RT_DEBUG_TRACE, (" MlmeUpdateTxRates (.word = %x )\n", pAdapter->MacTab.Content[BSSID_WCID].HTPhyMode.word));
- }
- else
- {
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_STA_CONFIG(kmalloc failed)\n"));
- Status = -EFAULT;
- }
- break;
- case RT_OID_QUERY_MULTIPLE_CARD_SUPPORT:
- wrq->u.data.length = sizeof(UCHAR);
- i = 0;
- if (copy_to_user(wrq->u.data.pointer, &i, wrq->u.data.length))
- {
- Status = -EFAULT;
- }
- DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_QUERY_MULTIPLE_CARD_SUPPORT(=%d) \n", i));
- break;
-
- case OID_802_11_BUILD_CHANNEL_EX:
- {
- UCHAR value;
- DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_BUILD_CHANNEL_EX \n"));
- wrq->u.data.length = sizeof(UCHAR);
- DBGPRINT(RT_DEBUG_TRACE, ("Doesn't support EXT_BUILD_CHANNEL_LIST.\n"));
- value = 0;
- Status = copy_to_user(wrq->u.data.pointer, &value, 1);
- DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
- }
- break;
-
- case OID_802_11_GET_CH_LIST:
- {
- PRT_CHANNEL_LIST_INFO pChListBuf;
-
- DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_GET_CH_LIST \n"));
- if (pAdapter->ChannelListNum == 0)
- {
- wrq->u.data.length = 0;
- break;
- }
-
- pChListBuf = (RT_CHANNEL_LIST_INFO *) kmalloc(sizeof(RT_CHANNEL_LIST_INFO), MEM_ALLOC_FLAG);
- if (pChListBuf == NULL)
- {
- wrq->u.data.length = 0;
- break;
- }
-
- pChListBuf->ChannelListNum = pAdapter->ChannelListNum;
- for (i = 0; i < pChListBuf->ChannelListNum; i++)
- pChListBuf->ChannelList[i] = pAdapter->ChannelList[i].Channel;
-
- wrq->u.data.length = sizeof(RT_CHANNEL_LIST_INFO);
- Status = copy_to_user(wrq->u.data.pointer, pChListBuf, sizeof(RT_CHANNEL_LIST_INFO));
- DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
-
- if (pChListBuf)
- kfree(pChListBuf);
- }
- break;
-
- case OID_802_11_GET_COUNTRY_CODE:
- DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_GET_COUNTRY_CODE \n"));
- wrq->u.data.length = 2;
- Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.CountryCode, 2);
- DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
- break;
-
- case OID_802_11_GET_CHANNEL_GEOGRAPHY:
- DBGPRINT(RT_DEBUG_TRACE, ("Query::OID_802_11_GET_CHANNEL_GEOGRAPHY \n"));
- wrq->u.data.length = 1;
- Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.Geography, 1);
- DBGPRINT(RT_DEBUG_TRACE, ("Status=%d\n", Status));
- break;
-
- default:
- DBGPRINT(RT_DEBUG_TRACE, ("Query::unknown IOCTL's subcmd = 0x%08x\n", cmd));
- Status = -EOPNOTSUPP;
- break;
- }
- return Status;
-}
-
-INT rt28xx_sta_ioctl(
- IN struct net_device *net_dev,
- IN OUT struct ifreq *rq,
- IN INT cmd)
-{
- POS_COOKIE pObj;
- VIRTUAL_ADAPTER *pVirtualAd = NULL;
- RTMP_ADAPTER *pAd = NULL;
- struct iwreq *wrq = (struct iwreq *) rq;
- BOOLEAN StateMachineTouched = FALSE;
- INT Status = NDIS_STATUS_SUCCESS;
- USHORT subcmd;
-
- if (net_dev->priv_flags == INT_MAIN)
- {
- pAd = net_dev->ml_priv;
- }
- else
- {
- pVirtualAd = net_dev->ml_priv;
- pAd = pVirtualAd->RtmpDev->ml_priv;
- }
- pObj = (POS_COOKIE) pAd->OS_Cookie;
-
- if (pAd == NULL)
- {
- /* if 1st open fail, pAd will be free;
- So the net_dev->ml_priv will be NULL in 2rd open */
- return -ENETDOWN;
- }
-
- //check if the interface is down
- if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
- {
- {
- DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n"));
- return -ENETDOWN;
- }
- }
-
- { // determine this ioctl command is comming from which interface.
- pObj->ioctl_if_type = INT_MAIN;
- pObj->ioctl_if = MAIN_MBSSID;
- }
-
- switch(cmd)
- {
- case SIOCGIFHWADDR:
- DBGPRINT(RT_DEBUG_TRACE, ("IOCTL::SIOCGIFHWADDR\n"));
- memcpy(wrq->u.name, pAd->CurrentAddress, ETH_ALEN);
- break;
- case SIOCGIWNAME:
- {
- char *name=&wrq->u.name[0];
- rt_ioctl_giwname(net_dev, NULL, name, NULL);
- break;
- }
- case SIOCGIWESSID: //Get ESSID
- {
- struct iw_point *essid=&wrq->u.essid;
- rt_ioctl_giwessid(net_dev, NULL, essid, essid->pointer);
- break;
- }
- case SIOCSIWESSID: //Set ESSID
- {
- struct iw_point *essid=&wrq->u.essid;
- rt_ioctl_siwessid(net_dev, NULL, essid, essid->pointer);
- break;
- }
- case SIOCSIWNWID: // set network id (the cell)
- case SIOCGIWNWID: // get network id
- Status = -EOPNOTSUPP;
- break;
- case SIOCSIWFREQ: //set channel/frequency (Hz)
- {
- struct iw_freq *freq=&wrq->u.freq;
- rt_ioctl_siwfreq(net_dev, NULL, freq, NULL);
- break;
- }
- case SIOCGIWFREQ: // get channel/frequency (Hz)
- {
- struct iw_freq *freq=&wrq->u.freq;
- rt_ioctl_giwfreq(net_dev, NULL, freq, NULL);
- break;
- }
- case SIOCSIWNICKN: //set node name/nickname
- {
- struct iw_point *data=&wrq->u.data;
- rt_ioctl_siwnickn(net_dev, NULL, data, NULL);
- break;
- }
- case SIOCGIWNICKN: //get node name/nickname
- {
- struct iw_point *data=&wrq->u.data;
- rt_ioctl_giwnickn(net_dev, NULL, data, NULL);
- break;
- }
- case SIOCGIWRATE: //get default bit rate (bps)
- rt_ioctl_giwrate(net_dev, NULL, &wrq->u, NULL);
- break;
- case SIOCSIWRATE: //set default bit rate (bps)
- rt_ioctl_siwrate(net_dev, NULL, &wrq->u, NULL);
- break;
- case SIOCGIWRTS: // get RTS/CTS threshold (bytes)
- {
- struct iw_param *rts=&wrq->u.rts;
- rt_ioctl_giwrts(net_dev, NULL, rts, NULL);
- break;
- }
- case SIOCSIWRTS: //set RTS/CTS threshold (bytes)
- {
- struct iw_param *rts=&wrq->u.rts;
- rt_ioctl_siwrts(net_dev, NULL, rts, NULL);
- break;
- }
- case SIOCGIWFRAG: //get fragmentation thr (bytes)
- {
- struct iw_param *frag=&wrq->u.frag;
- rt_ioctl_giwfrag(net_dev, NULL, frag, NULL);
- break;
- }
- case SIOCSIWFRAG: //set fragmentation thr (bytes)
- {
- struct iw_param *frag=&wrq->u.frag;
- rt_ioctl_siwfrag(net_dev, NULL, frag, NULL);
- break;
- }
- case SIOCGIWENCODE: //get encoding token & mode
- {
- struct iw_point *erq=&wrq->u.encoding;
- if(erq->pointer)
- rt_ioctl_giwencode(net_dev, NULL, erq, erq->pointer);
- break;
- }
- case SIOCSIWENCODE: //set encoding token & mode
- {
- struct iw_point *erq=&wrq->u.encoding;
- if(erq->pointer)
- rt_ioctl_siwencode(net_dev, NULL, erq, erq->pointer);
- break;
- }
- case SIOCGIWAP: //get access point MAC addresses
- {
- struct sockaddr *ap_addr=&wrq->u.ap_addr;
- rt_ioctl_giwap(net_dev, NULL, ap_addr, ap_addr->sa_data);
- break;
- }
- case SIOCSIWAP: //set access point MAC addresses
- {
- struct sockaddr *ap_addr=&wrq->u.ap_addr;
- rt_ioctl_siwap(net_dev, NULL, ap_addr, ap_addr->sa_data);
- break;
- }
- case SIOCGIWMODE: //get operation mode
- {
- __u32 *mode=&wrq->u.mode;
- rt_ioctl_giwmode(net_dev, NULL, mode, NULL);
- break;
- }
- case SIOCSIWMODE: //set operation mode
- {
- __u32 *mode=&wrq->u.mode;
- rt_ioctl_siwmode(net_dev, NULL, mode, NULL);
- break;
- }
- case SIOCGIWSENS: //get sensitivity (dBm)
- case SIOCSIWSENS: //set sensitivity (dBm)
- case SIOCGIWPOWER: //get Power Management settings
- case SIOCSIWPOWER: //set Power Management settings
- case SIOCGIWTXPOW: //get transmit power (dBm)
- case SIOCSIWTXPOW: //set transmit power (dBm)
- case SIOCGIWRANGE: //Get range of parameters
- case SIOCGIWRETRY: //get retry limits and lifetime
- case SIOCSIWRETRY: //set retry limits and lifetime
- Status = -EOPNOTSUPP;
- break;
- case RT_PRIV_IOCTL:
-#ifdef RT30xx
- case RT_PRIV_IOCTL_EXT:
-#endif
- subcmd = wrq->u.data.flags;
- if( subcmd & OID_GET_SET_TOGGLE)
- Status = RTMPSetInformation(pAd, rq, subcmd);
- else
- Status = RTMPQueryInformation(pAd, rq, subcmd);
- break;
- case SIOCGIWPRIV:
- if (wrq->u.data.pointer)
- {
- if ( access_ok(VERIFY_WRITE, wrq->u.data.pointer, sizeof(privtab)) != TRUE)
- break;
- wrq->u.data.length = sizeof(privtab) / sizeof(privtab[0]);
- if (copy_to_user(wrq->u.data.pointer, privtab, sizeof(privtab)))
- Status = -EFAULT;
- }
- break;
- case RTPRIV_IOCTL_SET:
- if(access_ok(VERIFY_READ, wrq->u.data.pointer, wrq->u.data.length) != TRUE)
- break;
- rt_ioctl_setparam(net_dev, NULL, NULL, wrq->u.data.pointer);
- break;
- case RTPRIV_IOCTL_GSITESURVEY:
- RTMPIoctlGetSiteSurvey(pAd, wrq);
- break;
-#ifdef DBG
- case RTPRIV_IOCTL_MAC:
- RTMPIoctlMAC(pAd, wrq);
- break;
- case RTPRIV_IOCTL_E2P:
- RTMPIoctlE2PROM(pAd, wrq);
- break;
-#ifdef RT30xx
- case RTPRIV_IOCTL_RF:
- RTMPIoctlRF(pAd, wrq);
- break;
-#endif // RT30xx //
-#endif // DBG //
- case SIOCETHTOOL:
- break;
- default:
- DBGPRINT(RT_DEBUG_ERROR, ("IOCTL::unknown IOCTL's cmd = 0x%08x\n", cmd));
- Status = -EOPNOTSUPP;
- break;
- }
-
- if(StateMachineTouched) // Upper layer sent a MLME-related operations
- RT28XX_MLME_HANDLER(pAd);
-
- return Status;
-}
-
-/*
- ==========================================================================
- Description:
- Set SSID
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_SSID_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg)
-{
- NDIS_802_11_SSID Ssid, *pSsid=NULL;
- BOOLEAN StateMachineTouched = FALSE;
- int success = TRUE;
-
- if( strlen(arg) <= MAX_LEN_OF_SSID)
- {
- NdisZeroMemory(&Ssid, sizeof(NDIS_802_11_SSID));
- if (strlen(arg) != 0)
- {
- NdisMoveMemory(Ssid.Ssid, arg, strlen(arg));
- Ssid.SsidLength = strlen(arg);
- }
- else //ANY ssid
- {
- Ssid.SsidLength = 0;
- memcpy(Ssid.Ssid, "", 0);
- pAdapter->StaCfg.BssType = BSS_INFRA;
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
- pAdapter->StaCfg.WepStatus = Ndis802_11EncryptionDisabled;
- }
- pSsid = &Ssid;
-
- if (pAdapter->Mlme.CntlMachine.CurrState != CNTL_IDLE)
- {
- RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
- DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n"));
- }
-
- pAdapter->MlmeAux.CurrReqIsFromNdis = TRUE;
- pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE;
- pAdapter->bConfigChanged = TRUE;
-
- MlmeEnqueue(pAdapter,
- MLME_CNTL_STATE_MACHINE,
- OID_802_11_SSID,
- sizeof(NDIS_802_11_SSID),
- (VOID *)pSsid);
-
- StateMachineTouched = TRUE;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_SSID_Proc::(Len=%d,Ssid=%s)\n", Ssid.SsidLength, Ssid.Ssid));
- }
- else
- success = FALSE;
-
- if (StateMachineTouched) // Upper layer sent a MLME-related operations
- RT28XX_MLME_HANDLER(pAdapter);
-
- return success;
-}
-
-#ifdef WMM_SUPPORT
-/*
- ==========================================================================
- Description:
- Set WmmCapable Enable or Disable
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_WmmCapable_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- BOOLEAN bWmmCapable;
-
- bWmmCapable = simple_strtol(arg, 0, 10);
-
- if ((bWmmCapable == 1)
-#ifdef RT2870
- && (pAd->NumberOfPipes >= 5)
-#endif // RT2870 //
- )
- pAd->CommonCfg.bWmmCapable = TRUE;
- else if (bWmmCapable == 0)
- pAd->CommonCfg.bWmmCapable = FALSE;
- else
- return FALSE; //Invalid argument
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_WmmCapable_Proc::(bWmmCapable=%d)\n",
- pAd->CommonCfg.bWmmCapable));
-
- return TRUE;
-}
-#endif // WMM_SUPPORT //
-
-/*
- ==========================================================================
- Description:
- Set Network Type(Infrastructure/Adhoc mode)
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_NetworkType_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg)
-{
- UINT32 Value = 0;
-
- if (strcmp(arg, "Adhoc") == 0)
- {
- if (pAdapter->StaCfg.BssType != BSS_ADHOC)
- {
- // Config has changed
- pAdapter->bConfigChanged = TRUE;
- if (MONITOR_ON(pAdapter))
- {
- RTMP_IO_WRITE32(pAdapter, RX_FILTR_CFG, STANORMAL);
- RTMP_IO_READ32(pAdapter, MAC_SYS_CTRL, &Value);
- Value &= (~0x80);
- RTMP_IO_WRITE32(pAdapter, MAC_SYS_CTRL, Value);
- OPSTATUS_CLEAR_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED);
- pAdapter->StaCfg.bAutoReconnect = TRUE;
- LinkDown(pAdapter, FALSE);
- }
- if (INFRA_ON(pAdapter))
- {
- //BOOLEAN Cancelled;
- // Set the AutoReconnectSsid to prevent it reconnect to old SSID
- // Since calling this indicate user don't want to connect to that SSID anymore.
- pAdapter->MlmeAux.AutoReconnectSsidLen= 32;
- NdisZeroMemory(pAdapter->MlmeAux.AutoReconnectSsid, pAdapter->MlmeAux.AutoReconnectSsidLen);
-
- LinkDown(pAdapter, FALSE);
-
- DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event BB!\n"));
- }
- }
- pAdapter->StaCfg.BssType = BSS_ADHOC;
- pAdapter->net_dev->type = pAdapter->StaCfg.OriDevType;
- DBGPRINT(RT_DEBUG_TRACE, ("===>Set_NetworkType_Proc::(AD-HOC)\n"));
- }
- else if (strcmp(arg, "Infra") == 0)
- {
- if (pAdapter->StaCfg.BssType != BSS_INFRA)
- {
- // Config has changed
- pAdapter->bConfigChanged = TRUE;
- if (MONITOR_ON(pAdapter))
- {
- RTMP_IO_WRITE32(pAdapter, RX_FILTR_CFG, STANORMAL);
- RTMP_IO_READ32(pAdapter, MAC_SYS_CTRL, &Value);
- Value &= (~0x80);
- RTMP_IO_WRITE32(pAdapter, MAC_SYS_CTRL, Value);
- OPSTATUS_CLEAR_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED);
- pAdapter->StaCfg.bAutoReconnect = TRUE;
- LinkDown(pAdapter, FALSE);
- }
- if (ADHOC_ON(pAdapter))
- {
- // Set the AutoReconnectSsid to prevent it reconnect to old SSID
- // Since calling this indicate user don't want to connect to that SSID anymore.
- pAdapter->MlmeAux.AutoReconnectSsidLen= 32;
- NdisZeroMemory(pAdapter->MlmeAux.AutoReconnectSsid, pAdapter->MlmeAux.AutoReconnectSsidLen);
-
- LinkDown(pAdapter, FALSE);
- }
- }
- pAdapter->StaCfg.BssType = BSS_INFRA;
- pAdapter->net_dev->type = pAdapter->StaCfg.OriDevType;
- DBGPRINT(RT_DEBUG_TRACE, ("===>Set_NetworkType_Proc::(INFRA)\n"));
-
- pAdapter->StaCfg.BssType = BSS_INFRA;
- }
- else if (strcmp(arg, "Monitor") == 0)
- {
- UCHAR bbpValue = 0;
- BCN_TIME_CFG_STRUC csr;
- OPSTATUS_CLEAR_FLAG(pAdapter, fOP_STATUS_INFRA_ON);
- OPSTATUS_CLEAR_FLAG(pAdapter, fOP_STATUS_ADHOC_ON);
- OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED);
- // disable all periodic state machine
- pAdapter->StaCfg.bAutoReconnect = FALSE;
- // reset all mlme state machine
- RT28XX_MLME_RESET_STATE_MACHINE(pAdapter);
- DBGPRINT(RT_DEBUG_TRACE, ("fOP_STATUS_MEDIA_STATE_CONNECTED \n"));
- if (pAdapter->CommonCfg.CentralChannel == 0)
- {
- if (pAdapter->CommonCfg.PhyMode == PHY_11AN_MIXED)
- pAdapter->CommonCfg.CentralChannel = 36;
- else
- pAdapter->CommonCfg.CentralChannel = 6;
- }
- else
- N_ChannelCheck(pAdapter);
-
- if (pAdapter->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
- pAdapter->CommonCfg.RegTransmitSetting.field.BW == BW_40 &&
- pAdapter->CommonCfg.RegTransmitSetting.field.EXTCHA == EXTCHA_ABOVE)
- {
- // 40MHz ,control channel at lower
- RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R4, &bbpValue);
- bbpValue &= (~0x18);
- bbpValue |= 0x10;
- RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R4, bbpValue);
- pAdapter->CommonCfg.BBPCurrentBW = BW_40;
- // RX : control channel at lower
- RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R3, &bbpValue);
- bbpValue &= (~0x20);
- RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R3, bbpValue);
-
- RTMP_IO_READ32(pAdapter, TX_BAND_CFG, &Value);
- Value &= 0xfffffffe;
- RTMP_IO_WRITE32(pAdapter, TX_BAND_CFG, Value);
- pAdapter->CommonCfg.CentralChannel = pAdapter->CommonCfg.Channel + 2;
- AsicSwitchChannel(pAdapter, pAdapter->CommonCfg.CentralChannel, FALSE);
- AsicLockChannel(pAdapter, pAdapter->CommonCfg.CentralChannel);
- DBGPRINT(RT_DEBUG_TRACE, ("BW_40 ,control_channel(%d), CentralChannel(%d) \n",
- pAdapter->CommonCfg.Channel,
- pAdapter->CommonCfg.CentralChannel));
- }
- else if (pAdapter->CommonCfg.PhyMode >= PHY_11ABGN_MIXED &&
- pAdapter->CommonCfg.RegTransmitSetting.field.BW == BW_40 &&
- pAdapter->CommonCfg.RegTransmitSetting.field.EXTCHA == EXTCHA_BELOW)
- {
- // 40MHz ,control channel at upper
- RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R4, &bbpValue);
- bbpValue &= (~0x18);
- bbpValue |= 0x10;
- RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R4, bbpValue);
- pAdapter->CommonCfg.BBPCurrentBW = BW_40;
- RTMP_IO_READ32(pAdapter, TX_BAND_CFG, &Value);
- Value |= 0x1;
- RTMP_IO_WRITE32(pAdapter, TX_BAND_CFG, Value);
-
- RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R3, &bbpValue);
- bbpValue |= (0x20);
- RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R3, bbpValue);
- pAdapter->CommonCfg.CentralChannel = pAdapter->CommonCfg.Channel - 2;
- AsicSwitchChannel(pAdapter, pAdapter->CommonCfg.CentralChannel, FALSE);
- AsicLockChannel(pAdapter, pAdapter->CommonCfg.CentralChannel);
- DBGPRINT(RT_DEBUG_TRACE, ("BW_40 ,control_channel(%d), CentralChannel(%d) \n",
- pAdapter->CommonCfg.Channel,
- pAdapter->CommonCfg.CentralChannel));
- }
- else
- {
- // 20MHz
- RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R4, &bbpValue);
- bbpValue &= (~0x18);
- RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R4, bbpValue);
- pAdapter->CommonCfg.BBPCurrentBW = BW_20;
- AsicSwitchChannel(pAdapter, pAdapter->CommonCfg.Channel, FALSE);
- AsicLockChannel(pAdapter, pAdapter->CommonCfg.Channel);
- DBGPRINT(RT_DEBUG_TRACE, ("BW_20, Channel(%d)\n", pAdapter->CommonCfg.Channel));
- }
- // Enable Rx with promiscuous reception
- RTMP_IO_WRITE32(pAdapter, RX_FILTR_CFG, 0x3);
- // ASIC supporsts sniffer function with replacing RSSI with timestamp.
- //RTMP_IO_READ32(pAdapter, MAC_SYS_CTRL, &Value);
- //Value |= (0x80);
- //RTMP_IO_WRITE32(pAdapter, MAC_SYS_CTRL, Value);
- // disable sync
- RTMP_IO_READ32(pAdapter, BCN_TIME_CFG, &csr.word);
- csr.field.bBeaconGen = 0;
- csr.field.bTBTTEnable = 0;
- csr.field.TsfSyncMode = 0;
- RTMP_IO_WRITE32(pAdapter, BCN_TIME_CFG, csr.word);
-
- pAdapter->StaCfg.BssType = BSS_MONITOR;
- pAdapter->net_dev->type = ARPHRD_IEEE80211_PRISM; //ARPHRD_IEEE80211; // IEEE80211
- DBGPRINT(RT_DEBUG_TRACE, ("===>Set_NetworkType_Proc::(MONITOR)\n"));
- }
-
- // Reset Ralink supplicant to not use, it will be set to start when UI set PMK key
- pAdapter->StaCfg.WpaState = SS_NOTUSE;
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_NetworkType_Proc::(NetworkType=%d)\n", pAdapter->StaCfg.BssType));
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set Authentication mode
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_AuthMode_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg)
-{
- if ((strcmp(arg, "WEPAUTO") == 0) || (strcmp(arg, "wepauto") == 0))
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeAutoSwitch;
- else if ((strcmp(arg, "OPEN") == 0) || (strcmp(arg, "open") == 0))
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
- else if ((strcmp(arg, "SHARED") == 0) || (strcmp(arg, "shared") == 0))
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeShared;
- else if ((strcmp(arg, "WPAPSK") == 0) || (strcmp(arg, "wpapsk") == 0))
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPAPSK;
- else if ((strcmp(arg, "WPANONE") == 0) || (strcmp(arg, "wpanone") == 0))
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPANone;
- else if ((strcmp(arg, "WPA2PSK") == 0) || (strcmp(arg, "wpa2psk") == 0))
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2PSK;
- else if ((strcmp(arg, "WPA") == 0) || (strcmp(arg, "wpa") == 0))
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA;
- else if ((strcmp(arg, "WPA2") == 0) || (strcmp(arg, "wpa2") == 0))
- pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2;
- else
- return FALSE;
-
- pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_AuthMode_Proc::(AuthMode=%d)\n", pAdapter->StaCfg.AuthMode));
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set Encryption Type
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_EncrypType_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg)
-{
- if ((strcmp(arg, "NONE") == 0) || (strcmp(arg, "none") == 0))
- {
- if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
- return TRUE; // do nothing
-
- pAdapter->StaCfg.WepStatus = Ndis802_11WEPDisabled;
- pAdapter->StaCfg.PairCipher = Ndis802_11WEPDisabled;
- pAdapter->StaCfg.GroupCipher = Ndis802_11WEPDisabled;
- }
- else if ((strcmp(arg, "WEP") == 0) || (strcmp(arg, "wep") == 0))
- {
- if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
- return TRUE; // do nothing
-
- pAdapter->StaCfg.WepStatus = Ndis802_11WEPEnabled;
- pAdapter->StaCfg.PairCipher = Ndis802_11WEPEnabled;
- pAdapter->StaCfg.GroupCipher = Ndis802_11WEPEnabled;
- }
- else if ((strcmp(arg, "TKIP") == 0) || (strcmp(arg, "tkip") == 0))
- {
- if (pAdapter->StaCfg.AuthMode < Ndis802_11AuthModeWPA)
- return TRUE; // do nothing
-
- pAdapter->StaCfg.WepStatus = Ndis802_11Encryption2Enabled;
- pAdapter->StaCfg.PairCipher = Ndis802_11Encryption2Enabled;
- pAdapter->StaCfg.GroupCipher = Ndis802_11Encryption2Enabled;
- }
- else if ((strcmp(arg, "AES") == 0) || (strcmp(arg, "aes") == 0))
- {
- if (pAdapter->StaCfg.AuthMode < Ndis802_11AuthModeWPA)
- return TRUE; // do nothing
-
- pAdapter->StaCfg.WepStatus = Ndis802_11Encryption3Enabled;
- pAdapter->StaCfg.PairCipher = Ndis802_11Encryption3Enabled;
- pAdapter->StaCfg.GroupCipher = Ndis802_11Encryption3Enabled;
- }
- else
- return FALSE;
-
- pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_EncrypType_Proc::(EncrypType=%d)\n", pAdapter->StaCfg.WepStatus));
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set Default Key ID
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_DefaultKeyID_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg)
-{
- ULONG KeyIdx;
-
- KeyIdx = simple_strtol(arg, 0, 10);
- if((KeyIdx >= 1 ) && (KeyIdx <= 4))
- pAdapter->StaCfg.DefaultKeyId = (UCHAR) (KeyIdx - 1 );
- else
- return FALSE; //Invalid argument
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_DefaultKeyID_Proc::(DefaultKeyID=%d)\n", pAdapter->StaCfg.DefaultKeyId));
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set WEP KEY1
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_Key1_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg)
-{
- int KeyLen;
- int i;
- UCHAR CipherAlg=CIPHER_WEP64;
-
- if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
- return TRUE; // do nothing
-
- KeyLen = strlen(arg);
-
- switch (KeyLen)
- {
- case 5: //wep 40 Ascii type
- pAdapter->SharedKey[BSS0][0].KeyLen = KeyLen;
- memcpy(pAdapter->SharedKey[BSS0][0].Key, arg, KeyLen);
- CipherAlg = CIPHER_WEP64;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::(Key1=%s and type=%s)\n", arg, "Ascii"));
- break;
- case 10: //wep 40 Hex type
- for(i=0; i < KeyLen; i++)
- {
- if( !isxdigit(*(arg+i)) )
- return FALSE; //Not Hex value;
- }
- pAdapter->SharedKey[BSS0][0].KeyLen = KeyLen / 2 ;
- AtoH(arg, pAdapter->SharedKey[BSS0][0].Key, KeyLen / 2);
- CipherAlg = CIPHER_WEP64;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::(Key1=%s and type=%s)\n", arg, "Hex"));
- break;
- case 13: //wep 104 Ascii type
- pAdapter->SharedKey[BSS0][0].KeyLen = KeyLen;
- memcpy(pAdapter->SharedKey[BSS0][0].Key, arg, KeyLen);
- CipherAlg = CIPHER_WEP128;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::(Key1=%s and type=%s)\n", arg, "Ascii"));
- break;
- case 26: //wep 104 Hex type
- for(i=0; i < KeyLen; i++)
- {
- if( !isxdigit(*(arg+i)) )
- return FALSE; //Not Hex value;
- }
- pAdapter->SharedKey[BSS0][0].KeyLen = KeyLen / 2 ;
- AtoH(arg, pAdapter->SharedKey[BSS0][0].Key, KeyLen / 2);
- CipherAlg = CIPHER_WEP128;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::(Key1=%s and type=%s)\n", arg, "Hex"));
- break;
- default: //Invalid argument
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key1_Proc::Invalid argument (=%s)\n", arg));
- return FALSE;
- }
-
- pAdapter->SharedKey[BSS0][0].CipherAlg = CipherAlg;
-
- // Set keys (into ASIC)
- if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
- ; // not support
- else // Old WEP stuff
- {
- AsicAddSharedKeyEntry(pAdapter,
- 0,
- 0,
- pAdapter->SharedKey[BSS0][0].CipherAlg,
- pAdapter->SharedKey[BSS0][0].Key,
- NULL,
- NULL);
- }
-
- return TRUE;
-}
-/*
- ==========================================================================
-
- Description:
- Set WEP KEY2
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_Key2_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg)
-{
- int KeyLen;
- int i;
- UCHAR CipherAlg=CIPHER_WEP64;
-
- if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
- return TRUE; // do nothing
-
- KeyLen = strlen(arg);
-
- switch (KeyLen)
- {
- case 5: //wep 40 Ascii type
- pAdapter->SharedKey[BSS0][1].KeyLen = KeyLen;
- memcpy(pAdapter->SharedKey[BSS0][1].Key, arg, KeyLen);
- CipherAlg = CIPHER_WEP64;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::(Key2=%s and type=%s)\n", arg, "Ascii"));
- break;
- case 10: //wep 40 Hex type
- for(i=0; i < KeyLen; i++)
- {
- if( !isxdigit(*(arg+i)) )
- return FALSE; //Not Hex value;
- }
- pAdapter->SharedKey[BSS0][1].KeyLen = KeyLen / 2 ;
- AtoH(arg, pAdapter->SharedKey[BSS0][1].Key, KeyLen / 2);
- CipherAlg = CIPHER_WEP64;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::(Key2=%s and type=%s)\n", arg, "Hex"));
- break;
- case 13: //wep 104 Ascii type
- pAdapter->SharedKey[BSS0][1].KeyLen = KeyLen;
- memcpy(pAdapter->SharedKey[BSS0][1].Key, arg, KeyLen);
- CipherAlg = CIPHER_WEP128;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::(Key2=%s and type=%s)\n", arg, "Ascii"));
- break;
- case 26: //wep 104 Hex type
- for(i=0; i < KeyLen; i++)
- {
- if( !isxdigit(*(arg+i)) )
- return FALSE; //Not Hex value;
- }
- pAdapter->SharedKey[BSS0][1].KeyLen = KeyLen / 2 ;
- AtoH(arg, pAdapter->SharedKey[BSS0][1].Key, KeyLen / 2);
- CipherAlg = CIPHER_WEP128;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::(Key2=%s and type=%s)\n", arg, "Hex"));
- break;
- default: //Invalid argument
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key2_Proc::Invalid argument (=%s)\n", arg));
- return FALSE;
- }
- pAdapter->SharedKey[BSS0][1].CipherAlg = CipherAlg;
-
- // Set keys (into ASIC)
- if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
- ; // not support
- else // Old WEP stuff
- {
- AsicAddSharedKeyEntry(pAdapter,
- 0,
- 1,
- pAdapter->SharedKey[BSS0][1].CipherAlg,
- pAdapter->SharedKey[BSS0][1].Key,
- NULL,
- NULL);
- }
-
- return TRUE;
-}
-/*
- ==========================================================================
- Description:
- Set WEP KEY3
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_Key3_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg)
-{
- int KeyLen;
- int i;
- UCHAR CipherAlg=CIPHER_WEP64;
-
- if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
- return TRUE; // do nothing
-
- KeyLen = strlen(arg);
-
- switch (KeyLen)
- {
- case 5: //wep 40 Ascii type
- pAdapter->SharedKey[BSS0][2].KeyLen = KeyLen;
- memcpy(pAdapter->SharedKey[BSS0][2].Key, arg, KeyLen);
- CipherAlg = CIPHER_WEP64;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::(Key3=%s and type=Ascii)\n", arg));
- break;
- case 10: //wep 40 Hex type
- for(i=0; i < KeyLen; i++)
- {
- if( !isxdigit(*(arg+i)) )
- return FALSE; //Not Hex value;
- }
- pAdapter->SharedKey[BSS0][2].KeyLen = KeyLen / 2 ;
- AtoH(arg, pAdapter->SharedKey[BSS0][2].Key, KeyLen / 2);
- CipherAlg = CIPHER_WEP64;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::(Key3=%s and type=Hex)\n", arg));
- break;
- case 13: //wep 104 Ascii type
- pAdapter->SharedKey[BSS0][2].KeyLen = KeyLen;
- memcpy(pAdapter->SharedKey[BSS0][2].Key, arg, KeyLen);
- CipherAlg = CIPHER_WEP128;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::(Key3=%s and type=Ascii)\n", arg));
- break;
- case 26: //wep 104 Hex type
- for(i=0; i < KeyLen; i++)
- {
- if( !isxdigit(*(arg+i)) )
- return FALSE; //Not Hex value;
- }
- pAdapter->SharedKey[BSS0][2].KeyLen = KeyLen / 2 ;
- AtoH(arg, pAdapter->SharedKey[BSS0][2].Key, KeyLen / 2);
- CipherAlg = CIPHER_WEP128;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::(Key3=%s and type=Hex)\n", arg));
- break;
- default: //Invalid argument
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key3_Proc::Invalid argument (=%s)\n", arg));
- return FALSE;
- }
- pAdapter->SharedKey[BSS0][2].CipherAlg = CipherAlg;
-
- // Set keys (into ASIC)
- if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
- ; // not support
- else // Old WEP stuff
- {
- AsicAddSharedKeyEntry(pAdapter,
- 0,
- 2,
- pAdapter->SharedKey[BSS0][2].CipherAlg,
- pAdapter->SharedKey[BSS0][2].Key,
- NULL,
- NULL);
- }
-
- return TRUE;
-}
-/*
- ==========================================================================
- Description:
- Set WEP KEY4
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_Key4_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg)
-{
- int KeyLen;
- int i;
- UCHAR CipherAlg=CIPHER_WEP64;
-
- if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
- return TRUE; // do nothing
-
- KeyLen = strlen(arg);
-
- switch (KeyLen)
- {
- case 5: //wep 40 Ascii type
- pAdapter->SharedKey[BSS0][3].KeyLen = KeyLen;
- memcpy(pAdapter->SharedKey[BSS0][3].Key, arg, KeyLen);
- CipherAlg = CIPHER_WEP64;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::(Key4=%s and type=%s)\n", arg, "Ascii"));
- break;
- case 10: //wep 40 Hex type
- for(i=0; i < KeyLen; i++)
- {
- if( !isxdigit(*(arg+i)) )
- return FALSE; //Not Hex value;
- }
- pAdapter->SharedKey[BSS0][3].KeyLen = KeyLen / 2 ;
- AtoH(arg, pAdapter->SharedKey[BSS0][3].Key, KeyLen / 2);
- CipherAlg = CIPHER_WEP64;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::(Key4=%s and type=%s)\n", arg, "Hex"));
- break;
- case 13: //wep 104 Ascii type
- pAdapter->SharedKey[BSS0][3].KeyLen = KeyLen;
- memcpy(pAdapter->SharedKey[BSS0][3].Key, arg, KeyLen);
- CipherAlg = CIPHER_WEP128;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::(Key4=%s and type=%s)\n", arg, "Ascii"));
- break;
- case 26: //wep 104 Hex type
- for(i=0; i < KeyLen; i++)
- {
- if( !isxdigit(*(arg+i)) )
- return FALSE; //Not Hex value;
- }
- pAdapter->SharedKey[BSS0][3].KeyLen = KeyLen / 2 ;
- AtoH(arg, pAdapter->SharedKey[BSS0][3].Key, KeyLen / 2);
- CipherAlg = CIPHER_WEP128;
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::(Key4=%s and type=%s)\n", arg, "Hex"));
- break;
- default: //Invalid argument
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Key4_Proc::Invalid argument (=%s)\n", arg));
- return FALSE;
- }
- pAdapter->SharedKey[BSS0][3].CipherAlg = CipherAlg;
-
- // Set keys (into ASIC)
- if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
- ; // not support
- else // Old WEP stuff
- {
- AsicAddSharedKeyEntry(pAdapter,
- 0,
- 3,
- pAdapter->SharedKey[BSS0][3].CipherAlg,
- pAdapter->SharedKey[BSS0][3].Key,
- NULL,
- NULL);
- }
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set WPA PSK key
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_WPAPSK_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg)
-{
- UCHAR keyMaterial[40];
-
- if ((pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPAPSK) &&
- (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPA2PSK) &&
- (pAdapter->StaCfg.AuthMode != Ndis802_11AuthModeWPANone)
- )
- return TRUE; // do nothing
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_WPAPSK_Proc::(WPAPSK=%s)\n", arg));
-
- NdisZeroMemory(keyMaterial, 40);
-
- if ((strlen(arg) < 8) || (strlen(arg) > 64))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("Set failed!!(WPAPSK=%s), WPAPSK key-string required 8 ~ 64 characters \n", arg));
- return FALSE;
- }
-
- if (strlen(arg) == 64)
- {
- AtoH(arg, keyMaterial, 32);
- NdisMoveMemory(pAdapter->StaCfg.PMK, keyMaterial, 32);
-
- }
- else
- {
- PasswordHash((char *)arg, pAdapter->MlmeAux.Ssid, pAdapter->MlmeAux.SsidLen, keyMaterial);
- NdisMoveMemory(pAdapter->StaCfg.PMK, keyMaterial, 32);
- }
-
-
-
- if(pAdapter->StaCfg.BssType == BSS_ADHOC &&
- pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPANone)
- {
- pAdapter->StaCfg.WpaState = SS_NOTUSE;
- }
- else
- {
- // Start STA supplicant state machine
- pAdapter->StaCfg.WpaState = SS_START;
- }
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set Power Saving mode
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_PSMode_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg)
-{
- if (pAdapter->StaCfg.BssType == BSS_INFRA)
- {
- if ((strcmp(arg, "Max_PSP") == 0) ||
- (strcmp(arg, "max_psp") == 0) ||
- (strcmp(arg, "MAX_PSP") == 0))
- {
- // do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
- // to exclude certain situations.
- if (pAdapter->StaCfg.bWindowsACCAMEnable == FALSE)
- pAdapter->StaCfg.WindowsPowerMode = Ndis802_11PowerModeMAX_PSP;
- pAdapter->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeMAX_PSP;
- OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
- pAdapter->StaCfg.DefaultListenCount = 5;
-
- }
- else if ((strcmp(arg, "Fast_PSP") == 0) ||
- (strcmp(arg, "fast_psp") == 0) ||
- (strcmp(arg, "FAST_PSP") == 0))
- {
- // do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
- // to exclude certain situations.
- OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
- if (pAdapter->StaCfg.bWindowsACCAMEnable == FALSE)
- pAdapter->StaCfg.WindowsPowerMode = Ndis802_11PowerModeFast_PSP;
- pAdapter->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeFast_PSP;
- pAdapter->StaCfg.DefaultListenCount = 3;
- }
- else if ((strcmp(arg, "Legacy_PSP") == 0) ||
- (strcmp(arg, "legacy_psp") == 0) ||
- (strcmp(arg, "LEGACY_PSP") == 0))
- {
- // do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
- // to exclude certain situations.
- OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
- if (pAdapter->StaCfg.bWindowsACCAMEnable == FALSE)
- pAdapter->StaCfg.WindowsPowerMode = Ndis802_11PowerModeLegacy_PSP;
- pAdapter->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeLegacy_PSP;
- pAdapter->StaCfg.DefaultListenCount = 3;
- }
- else
- {
- //Default Ndis802_11PowerModeCAM
- // clear PSM bit immediately
- MlmeSetPsmBit(pAdapter, PWR_ACTIVE);
- OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
- if (pAdapter->StaCfg.bWindowsACCAMEnable == FALSE)
- pAdapter->StaCfg.WindowsPowerMode = Ndis802_11PowerModeCAM;
- pAdapter->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeCAM;
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_PSMode_Proc::(PSMode=%ld)\n", pAdapter->StaCfg.WindowsPowerMode));
- }
- else
- return FALSE;
-
-
- return TRUE;
-}
-
-/*
- ==========================================================================
- Description:
- Set WpaSupport flag.
- Value:
- 0: Driver ignore wpa_supplicant.
- 1: wpa_supplicant initiates scanning and AP selection.
- 2: driver takes care of scanning, AP selection, and IEEE 802.11 association parameters.
- Return:
- TRUE if all parameters are OK, FALSE otherwise
- ==========================================================================
-*/
-INT Set_Wpa_Support(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
-
- if ( simple_strtol(arg, 0, 10) == 0)
- pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_DISABLE;
- else if ( simple_strtol(arg, 0, 10) == 1)
- pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_ENABLE;
- else if ( simple_strtol(arg, 0, 10) == 2)
- pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_ENABLE_WITH_WEB_UI;
- else
- pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_DISABLE;
-
- DBGPRINT(RT_DEBUG_TRACE, ("Set_Wpa_Support::(WpaSupplicantUP=%d)\n", pAd->StaCfg.WpaSupplicantUP));
-
- return TRUE;
-}
-
-#ifdef DBG
-/*
- ==========================================================================
- Description:
- Read / Write MAC
- Arguments:
- pAdapter Pointer to our adapter
- wrq Pointer to the ioctl argument
-
- Return Value:
- None
-
- Note:
- Usage:
- 1.) iwpriv ra0 mac 0 ==> read MAC where Addr=0x0
- 2.) iwpriv ra0 mac 0=12 ==> write MAC where Addr=0x0, value=12
- ==========================================================================
-*/
-VOID RTMPIoctlMAC(
- IN PRTMP_ADAPTER pAdapter,
- IN struct iwreq *wrq)
-{
- CHAR *this_char;
- CHAR *value;
- INT j = 0, k = 0;
- CHAR msg[1024];
- CHAR arg[255];
- ULONG macAddr = 0;
- UCHAR temp[16], temp2[16];
- UINT32 macValue = 0;
- INT Status;
-#ifdef RT30xx
- BOOLEAN bIsPrintAllMAC = FALSE;
-#endif
-
- memset(msg, 0x00, 1024);
- if (wrq->u.data.length > 1) //No parameters.
- {
- Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length);
- sprintf(msg, "\n");
-
- //Parsing Read or Write
- this_char = arg;
- if (!*this_char)
- goto next;
-
- if ((value = rtstrchr(this_char, '=')) != NULL)
- *value++ = 0;
-
- if (!value || !*value)
- { //Read
- // Sanity check
- if(strlen(this_char) > 4)
- goto next;
-
- j = strlen(this_char);
- while(j-- > 0)
- {
- if(this_char[j] > 'f' || this_char[j] < '0')
- return;
- }
-
- // Mac Addr
- k = j = strlen(this_char);
- while(j-- > 0)
- {
- this_char[4-k+j] = this_char[j];
- }
-
- while(k < 4)
- this_char[3-k++]='0';
- this_char[4]='\0';
-
- if(strlen(this_char) == 4)
- {
- AtoH(this_char, temp, 2);
- macAddr = *temp*256 + temp[1];
- if (macAddr < 0xFFFF)
- {
- RTMP_IO_READ32(pAdapter, macAddr, &macValue);
- DBGPRINT(RT_DEBUG_TRACE, ("MacAddr=%lx, MacValue=%x\n", macAddr, macValue));
- sprintf(msg+strlen(msg), "[0x%08lX]:%08X ", macAddr , macValue);
- }
- else
-#ifndef RT30xx
- {//Invalid parametes, so default printk all bbp
-#endif
-#ifdef RT30xx
- {//Invalid parametes, so default printk all mac
- bIsPrintAllMAC = TRUE;
-#endif
- goto next;
- }
- }
- }
- else
- { //Write
- memcpy(&temp2, value, strlen(value));
- temp2[strlen(value)] = '\0';
-
- // Sanity check
- if((strlen(this_char) > 4) || strlen(temp2) > 8)
- goto next;
-
- j = strlen(this_char);
- while(j-- > 0)
- {
- if(this_char[j] > 'f' || this_char[j] < '0')
- return;
- }
-
- j = strlen(temp2);
- while(j-- > 0)
- {
- if(temp2[j] > 'f' || temp2[j] < '0')
- return;
- }
-
- //MAC Addr
- k = j = strlen(this_char);
- while(j-- > 0)
- {
- this_char[4-k+j] = this_char[j];
- }
-
- while(k < 4)
- this_char[3-k++]='0';
- this_char[4]='\0';
-
- //MAC value
- k = j = strlen(temp2);
- while(j-- > 0)
- {
- temp2[8-k+j] = temp2[j];
- }
-
- while(k < 8)
- temp2[7-k++]='0';
- temp2[8]='\0';
-
- {
- AtoH(this_char, temp, 2);
- macAddr = *temp*256 + temp[1];
-
- AtoH(temp2, temp, 4);
- macValue = *temp*256*256*256 + temp[1]*256*256 + temp[2]*256 + temp[3];
-
- // debug mode
- if (macAddr == (HW_DEBUG_SETTING_BASE + 4))
- {
- // 0x2bf4: byte0 non-zero: enable R17 tuning, 0: disable R17 tuning
- if (macValue & 0x000000ff)
- {
- pAdapter->BbpTuning.bEnable = TRUE;
- DBGPRINT(RT_DEBUG_TRACE,("turn on R17 tuning\n"));
- }
- else
- {
- UCHAR R66;
- pAdapter->BbpTuning.bEnable = FALSE;
- R66 = 0x26 + GET_LNA_GAIN(pAdapter);
- RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R66, (0x26 + GET_LNA_GAIN(pAdapter)));
- DBGPRINT(RT_DEBUG_TRACE,("turn off R17 tuning, restore to 0x%02x\n", R66));
- }
- return;
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("MacAddr=%02lx, MacValue=0x%x\n", macAddr, macValue));
-
- RTMP_IO_WRITE32(pAdapter, macAddr, macValue);
- sprintf(msg+strlen(msg), "[0x%08lX]:%08X ", macAddr, macValue);
- }
- }
- }
-#ifdef RT30xx
- else
- bIsPrintAllMAC = TRUE;
-#endif
-next:
-#ifdef RT30xx
- if (bIsPrintAllMAC)
- {
- struct file *file_w;
- PCHAR fileName = "MacDump.txt";
- mm_segment_t orig_fs;
-
- orig_fs = get_fs();
- set_fs(KERNEL_DS);
-
- // open file
- file_w = filp_open(fileName, O_WRONLY|O_CREAT, 0);
- if (IS_ERR(file_w))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("-->2) %s: Error %ld opening %s\n", __func__, -PTR_ERR(file_w), fileName));
- }
- else
- {
- if (file_w->f_op && file_w->f_op->write)
- {
- file_w->f_pos = 0;
- macAddr = 0x1000;
-
- while (macAddr <= 0x1800)
- {
- RTMP_IO_READ32(pAdapter, macAddr, &macValue);
- sprintf(msg, "%08lx = %08X\n", macAddr, macValue);
-
- // write data to file
- file_w->f_op->write(file_w, msg, strlen(msg), &file_w->f_pos);
-
- printk("%s", msg);
- macAddr += 4;
- }
- sprintf(msg, "\nDump all MAC values to %s\n", fileName);
- }
- filp_close(file_w, NULL);
- }
- set_fs(orig_fs);
- }
-#endif /* RT30xx */
- if(strlen(msg) == 1)
- sprintf(msg+strlen(msg), "===>Error command format!");
-
- // Copy the information into the user buffer
- wrq->u.data.length = strlen(msg);
- Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
-
- DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlMAC\n\n"));
-}
-
-/*
- ==========================================================================
- Description:
- Read / Write E2PROM
- Arguments:
- pAdapter Pointer to our adapter
- wrq Pointer to the ioctl argument
-
- Return Value:
- None
-
- Note:
- Usage:
- 1.) iwpriv ra0 e2p 0 ==> read E2PROM where Addr=0x0
- 2.) iwpriv ra0 e2p 0=1234 ==> write E2PROM where Addr=0x0, value=1234
- ==========================================================================
-*/
-VOID RTMPIoctlE2PROM(
- IN PRTMP_ADAPTER pAdapter,
- IN struct iwreq *wrq)
-{
- CHAR *this_char;
- CHAR *value;
- INT j = 0, k = 0;
- CHAR msg[1024];
- CHAR arg[255];
- USHORT eepAddr = 0;
- UCHAR temp[16], temp2[16];
- USHORT eepValue;
- int Status;
-#ifdef RT30xx
- BOOLEAN bIsPrintAllE2P = FALSE;
-#endif
-
- memset(msg, 0x00, 1024);
- if (wrq->u.data.length > 1) //No parameters.
- {
- Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length);
- sprintf(msg, "\n");
-
- //Parsing Read or Write
- this_char = arg;
-
-
- if (!*this_char)
- goto next;
-
- if ((value = rtstrchr(this_char, '=')) != NULL)
- *value++ = 0;
-
- if (!value || !*value)
- { //Read
-
- // Sanity check
- if(strlen(this_char) > 4)
- goto next;
-
- j = strlen(this_char);
- while(j-- > 0)
- {
- if(this_char[j] > 'f' || this_char[j] < '0')
- return;
- }
-
- // E2PROM addr
- k = j = strlen(this_char);
- while(j-- > 0)
- {
- this_char[4-k+j] = this_char[j];
- }
-
- while(k < 4)
- this_char[3-k++]='0';
- this_char[4]='\0';
-
- if(strlen(this_char) == 4)
- {
- AtoH(this_char, temp, 2);
- eepAddr = *temp*256 + temp[1];
- if (eepAddr < 0xFFFF)
- {
- RT28xx_EEPROM_READ16(pAdapter, eepAddr, eepValue);
- sprintf(msg+strlen(msg), "[0x%04X]:0x%04X ", eepAddr , eepValue);
- }
- else
- {//Invalid parametes, so default printk all bbp
-#ifdef RT30xx
- bIsPrintAllE2P = TRUE;
-#endif
- goto next;
- }
- }
- }
- else
- { //Write
- memcpy(&temp2, value, strlen(value));
- temp2[strlen(value)] = '\0';
-
- // Sanity check
- if((strlen(this_char) > 4) || strlen(temp2) > 8)
- goto next;
-
- j = strlen(this_char);
- while(j-- > 0)
- {
- if(this_char[j] > 'f' || this_char[j] < '0')
- return;
- }
- j = strlen(temp2);
- while(j-- > 0)
- {
- if(temp2[j] > 'f' || temp2[j] < '0')
- return;
- }
-
- //MAC Addr
- k = j = strlen(this_char);
- while(j-- > 0)
- {
- this_char[4-k+j] = this_char[j];
- }
-
- while(k < 4)
- this_char[3-k++]='0';
- this_char[4]='\0';
-
- //MAC value
- k = j = strlen(temp2);
- while(j-- > 0)
- {
- temp2[4-k+j] = temp2[j];
- }
-
- while(k < 4)
- temp2[3-k++]='0';
- temp2[4]='\0';
-
- AtoH(this_char, temp, 2);
- eepAddr = *temp*256 + temp[1];
-
- AtoH(temp2, temp, 2);
- eepValue = *temp*256 + temp[1];
-
- RT28xx_EEPROM_WRITE16(pAdapter, eepAddr, eepValue);
- sprintf(msg+strlen(msg), "[0x%02X]:%02X ", eepAddr, eepValue);
- }
- }
-#ifdef RT30xx
- else
- bIsPrintAllE2P = TRUE;
-#endif
-next:
-#ifdef RT30xx
- if (bIsPrintAllE2P)
- {
- struct file *file_w;
- PCHAR fileName = "EEPROMDump.txt";
- mm_segment_t orig_fs;
-
- orig_fs = get_fs();
- set_fs(KERNEL_DS);
-
- // open file
- file_w = filp_open(fileName, O_WRONLY|O_CREAT, 0);
- if (IS_ERR(file_w))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("-->2) %s: Error %ld opening %s\n", __func__, -PTR_ERR(file_w), fileName));
- }
- else
- {
- if (file_w->f_op && file_w->f_op->write)
- {
- file_w->f_pos = 0;
- eepAddr = 0x00;
-
- while (eepAddr <= 0xFE)
- {
- RT28xx_EEPROM_READ16(pAdapter, eepAddr, eepValue);
- sprintf(msg, "%08x = %04x\n", eepAddr , eepValue);
-
- // write data to file
- file_w->f_op->write(file_w, msg, strlen(msg), &file_w->f_pos);
-
- printk("%s", msg);
- eepAddr += 2;
- }
- sprintf(msg, "\nDump all EEPROM values to %s\n", fileName);
- }
- filp_close(file_w, NULL);
- }
- set_fs(orig_fs);
- }
-#endif /* RT30xx */
- if(strlen(msg) == 1)
- sprintf(msg+strlen(msg), "===>Error command format!");
-
-
- // Copy the information into the user buffer
- wrq->u.data.length = strlen(msg);
- Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
-
- DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlE2PROM\n"));
-}
-#ifdef RT30xx
-/*
- ==========================================================================
- Description:
- Read / Write RF register
-Arguments:
- pAdapter Pointer to our adapter
- wrq Pointer to the ioctl argument
-
- Return Value:
- None
-
- Note:
- Usage:
- 1.) iwpriv ra0 rf ==> read all RF registers
- 2.) iwpriv ra0 rf 1 ==> read RF where RegID=1
- 3.) iwpriv ra0 rf 1=10 ==> write RF R1=0x10
- ==========================================================================
-*/
-VOID RTMPIoctlRF(
- IN PRTMP_ADAPTER pAdapter,
- IN struct iwreq *wrq)
-{
- CHAR *this_char;
- CHAR *value;
- UCHAR regRF = 0;
- CHAR msg[2048];
- CHAR arg[255];
- INT rfId;
- LONG rfValue;
- int Status;
- BOOLEAN bIsPrintAllRF = FALSE;
-
-
- memset(msg, 0x00, 2048);
- if (wrq->u.data.length > 1) //No parameters.
- {
- Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length);
- sprintf(msg, "\n");
-
- //Parsing Read or Write
- this_char = arg;
- if (!*this_char)
- goto next;
-
- if ((value = strchr(this_char, '=')) != NULL)
- *value++ = 0;
-
- if (!value || !*value)
- { //Read
- if (sscanf(this_char, "%d", &(rfId)) == 1)
- {
- if (rfId <= 31)
- {
- // In RT2860 ATE mode, we do not load 8051 firmware.
- //We must access RF directly.
- // For RT2870 ATE mode, ATE_RF_IO_WRITE8(/READ8)_BY_REG_ID are redefined.
- // according to Andy, Gary, David require.
- // the command rf shall read rf register directly for dubug.
- // BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP);
- RT30xxReadRFRegister(pAdapter, rfId, ®RF);
-
- sprintf(msg+strlen(msg), "R%02d[0x%02x]:%02X ", rfId, rfId*2, regRF);
- }
- else
- {//Invalid parametes, so default printk all RF
- bIsPrintAllRF = TRUE;
- goto next;
- }
- }
- else
- { //Invalid parametes, so default printk all RF
- bIsPrintAllRF = TRUE;
- goto next;
- }
- }
- else
- { //Write
- if ((sscanf(this_char, "%d", &(rfId)) == 1) && (sscanf(value, "%lx", &(rfValue)) == 1))
- {
- if (rfId <= 31)
- {
- // In RT2860 ATE mode, we do not load 8051 firmware.
- // We should access RF registers directly.
- // For RT2870 ATE mode, ATE_RF_IO_WRITE8/READ8_BY_REG_ID are redefined.
- {
- // according to Andy, Gary, David require.
- // the command RF shall read/write RF register directly for dubug.
- //BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP);
- //BBP_IO_WRITE8_BY_REG_ID(pAdapter, (UCHAR)bbpId,(UCHAR) bbpValue);
- RT30xxReadRFRegister(pAdapter, rfId, ®RF);
- RT30xxWriteRFRegister(pAdapter, (UCHAR)rfId,(UCHAR) rfValue);
- //Read it back for showing
- //BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP);
- RT30xxReadRFRegister(pAdapter, rfId, ®RF);
- sprintf(msg+strlen(msg), "R%02d[0x%02X]:%02X\n", rfId, rfId*2, regRF);
- }
- }
- else
- {//Invalid parametes, so default printk all RF
- bIsPrintAllRF = TRUE;
- }
- }
- else
- { //Invalid parametes, so default printk all RF
- bIsPrintAllRF = TRUE;
- }
- }
- }
- else
- bIsPrintAllRF = TRUE;
-next:
- if (bIsPrintAllRF)
- {
- memset(msg, 0x00, 2048);
- sprintf(msg, "\n");
- for (rfId = 0; rfId <= 31; rfId++)
- {
- // according to Andy, Gary, David require.
- // the command RF shall read/write RF register directly for dubug.
- RT30xxReadRFRegister(pAdapter, rfId, ®RF);
- sprintf(msg+strlen(msg), "%03d = %02X\n", rfId, regRF);
- }
- // Copy the information into the user buffer
- DBGPRINT(RT_DEBUG_TRACE, ("strlen(msg)=%d\n", (UINT32)strlen(msg)));
- wrq->u.data.length = strlen(msg);
- if (copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length))
- {
- DBGPRINT(RT_DEBUG_TRACE, ("%s: copy_to_user() fail\n", __func__));
- }
- }
- else
- {
- if(strlen(msg) == 1)
- sprintf(msg+strlen(msg), "===>Error command format!");
-
- DBGPRINT(RT_DEBUG_TRACE, ("copy to user [msg=%s]\n", msg));
- // Copy the information into the user buffer
- DBGPRINT(RT_DEBUG_TRACE, ("strlen(msg) =%d\n", (UINT32)strlen(msg)));
-
- // Copy the information into the user buffer
- wrq->u.data.length = strlen(msg);
- Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
- }
-
- DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlRF\n\n"));
-}
-#endif // RT30xx //
-#endif // DBG //
-
-
-
-
-INT Set_TGnWifiTest_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- if (simple_strtol(arg, 0, 10) == 0)
- pAd->StaCfg.bTGnWifiTest = FALSE;
- else
- pAd->StaCfg.bTGnWifiTest = TRUE;
-
- DBGPRINT(RT_DEBUG_TRACE, ("IF Set_TGnWifiTest_Proc::(bTGnWifiTest=%d)\n", pAd->StaCfg.bTGnWifiTest));
- return TRUE;
-}
-
-INT Set_LongRetryLimit_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg)
-{
- TX_RTY_CFG_STRUC tx_rty_cfg;
- UCHAR LongRetryLimit = (UCHAR)simple_strtol(arg, 0, 10);
-
- RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
- tx_rty_cfg.field.LongRtyLimit = LongRetryLimit;
- RTMP_IO_WRITE32(pAdapter, TX_RTY_CFG, tx_rty_cfg.word);
- DBGPRINT(RT_DEBUG_TRACE, ("IF Set_LongRetryLimit_Proc::(tx_rty_cfg=0x%x)\n", tx_rty_cfg.word));
- return TRUE;
-}
-
-INT Set_ShortRetryLimit_Proc(
- IN PRTMP_ADAPTER pAdapter,
- IN PUCHAR arg)
-{
- TX_RTY_CFG_STRUC tx_rty_cfg;
- UCHAR ShortRetryLimit = (UCHAR)simple_strtol(arg, 0, 10);
-
- RTMP_IO_READ32(pAdapter, TX_RTY_CFG, &tx_rty_cfg.word);
- tx_rty_cfg.field.ShortRtyLimit = ShortRetryLimit;
- RTMP_IO_WRITE32(pAdapter, TX_RTY_CFG, tx_rty_cfg.word);
- DBGPRINT(RT_DEBUG_TRACE, ("IF Set_ShortRetryLimit_Proc::(tx_rty_cfg=0x%x)\n", tx_rty_cfg.word));
- return TRUE;
-}
-
-#ifndef RT30xx
-INT Show_Adhoc_MacTable_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PCHAR extra)
-{
- INT i;
-
- sprintf(extra, "\n");
-
- sprintf(extra + strlen(extra), "HT Operating Mode : %d\n", pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode);
-
- sprintf(extra + strlen(extra), "\n%-19s%-4s%-4s%-7s%-7s%-7s%-10s%-6s%-6s%-6s%-6s\n",
- "MAC", "AID", "BSS", "RSSI0", "RSSI1", "RSSI2", "PhMd", "BW", "MCS", "SGI", "STBC");
-
- for (i=1; i<MAX_LEN_OF_MAC_TABLE; i++)
- {
- PMAC_TABLE_ENTRY pEntry = &pAd->MacTab.Content[i];
-
- if (strlen(extra) > (IW_PRIV_SIZE_MASK - 30))
- break;
- if ((pEntry->ValidAsCLI || pEntry->ValidAsApCli) && (pEntry->Sst == SST_ASSOC))
- {
- sprintf(extra + strlen(extra), "%02X:%02X:%02X:%02X:%02X:%02X ",
- pEntry->Addr[0], pEntry->Addr[1], pEntry->Addr[2],
- pEntry->Addr[3], pEntry->Addr[4], pEntry->Addr[5]);
- sprintf(extra + strlen(extra), "%-4d", (int)pEntry->Aid);
- sprintf(extra + strlen(extra), "%-4d", (int)pEntry->apidx);
- sprintf(extra + strlen(extra), "%-7d", pEntry->RssiSample.AvgRssi0);
- sprintf(extra + strlen(extra), "%-7d", pEntry->RssiSample.AvgRssi1);
- sprintf(extra + strlen(extra), "%-7d", pEntry->RssiSample.AvgRssi2);
- sprintf(extra + strlen(extra), "%-10s", GetPhyMode(pEntry->HTPhyMode.field.MODE));
- sprintf(extra + strlen(extra), "%-6s", GetBW(pEntry->HTPhyMode.field.BW));
- sprintf(extra + strlen(extra), "%-6d", pEntry->HTPhyMode.field.MCS);
- sprintf(extra + strlen(extra), "%-6d", pEntry->HTPhyMode.field.ShortGI);
- sprintf(extra + strlen(extra), "%-6d", pEntry->HTPhyMode.field.STBC);
- sprintf(extra + strlen(extra), "%-10d, %d, %d%%\n", pEntry->DebugFIFOCount, pEntry->DebugTxCount,
- (pEntry->DebugTxCount) ? ((pEntry->DebugTxCount-pEntry->DebugFIFOCount)*100/pEntry->DebugTxCount) : 0);
- sprintf(extra, "%s\n", extra);
- }
- }
-
- return TRUE;
-}
-#endif /* RT30xx */
+#include "../rt2860/sta_ioctl.c"
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- * *
- *************************************************************************
-
- Module Name:
- wpa.h
-
- Abstract:
-
- Revision History:
- Who When What
- -------- ---------- ----------------------------------------------
- Name Date Modification logs
-*/
-
-#ifndef __WPA_H__
-#define __WPA_H__
-
-// EAPOL Key descripter frame format related length
-#define LEN_KEY_DESC_NONCE 32
-#define LEN_KEY_DESC_IV 16
-#define LEN_KEY_DESC_RSC 8
-#define LEN_KEY_DESC_ID 8
-#define LEN_KEY_DESC_REPLAY 8
-#define LEN_KEY_DESC_MIC 16
-
-// The length is the EAPoL-Key frame except key data field.
-// Please refer to 802.11i-2004 ,Figure 43u in p.78
-#define LEN_EAPOL_KEY_MSG (sizeof(KEY_DESCRIPTER) - MAX_LEN_OF_RSNIE)
-
-// EAP Code Type.
-#define EAP_CODE_REQUEST 1
-#define EAP_CODE_RESPONSE 2
-#define EAP_CODE_SUCCESS 3
-#define EAP_CODE_FAILURE 4
-
-// EAPOL frame Protocol Version
-#define EAPOL_VER 1
-#define EAPOL_VER2 2
-
-// EAPOL-KEY Descriptor Type
-#define WPA1_KEY_DESC 0xfe
-#define WPA2_KEY_DESC 0x02
-
-// Key Descriptor Version of Key Information
-#define DESC_TYPE_TKIP 1
-#define DESC_TYPE_AES 2
-#define DESC_TYPE_MESH 3
-
-#define LEN_MSG1_2WAY 0x7f
-#define MAX_LEN_OF_EAP_HS 256
-
-#define LEN_MASTER_KEY 32
-
-// EAPOL EK, MK
-#define LEN_EAP_EK 16
-#define LEN_EAP_MICK 16
-#define LEN_EAP_KEY ((LEN_EAP_EK)+(LEN_EAP_MICK))
-// TKIP key related
-#define LEN_PMKID 16
-#define LEN_TKIP_EK 16
-#define LEN_TKIP_RXMICK 8
-#define LEN_TKIP_TXMICK 8
-#define LEN_AES_EK 16
-#define LEN_AES_KEY LEN_AES_EK
-#define LEN_TKIP_KEY ((LEN_TKIP_EK)+(LEN_TKIP_RXMICK)+(LEN_TKIP_TXMICK))
-#define TKIP_AP_TXMICK_OFFSET ((LEN_EAP_KEY)+(LEN_TKIP_EK))
-#define TKIP_AP_RXMICK_OFFSET (TKIP_AP_TXMICK_OFFSET+LEN_TKIP_TXMICK)
-#define TKIP_GTK_LENGTH ((LEN_TKIP_EK)+(LEN_TKIP_RXMICK)+(LEN_TKIP_TXMICK))
-#define LEN_PTK ((LEN_EAP_KEY)+(LEN_TKIP_KEY))
-#ifndef RT30xx
-#define MIN_LEN_OF_GTK 5
-#endif
-
-// RSN IE Length definition
-#define MAX_LEN_OF_RSNIE 90
-#define MIN_LEN_OF_RSNIE 8
-
-//EAP Packet Type
-#define EAPPacket 0
-#define EAPOLStart 1
-#define EAPOLLogoff 2
-#define EAPOLKey 3
-#define EAPOLASFAlert 4
-#define EAPTtypeMax 5
-
-#define EAPOL_MSG_INVALID 0
-#define EAPOL_PAIR_MSG_1 1
-#define EAPOL_PAIR_MSG_2 2
-#define EAPOL_PAIR_MSG_3 3
-#define EAPOL_PAIR_MSG_4 4
-#define EAPOL_GROUP_MSG_1 5
-#define EAPOL_GROUP_MSG_2 6
-
-#define PAIRWISEKEY 1
-#define GROUPKEY 0
-
-// Retry timer counter initial value
-#define PEER_MSG1_RETRY_TIMER_CTR 0
-#define PEER_MSG3_RETRY_TIMER_CTR 10
-#define GROUP_MSG1_RETRY_TIMER_CTR 20
-
-
-#define EAPOL_START_DISABLE 0
-#define EAPOL_START_PSK 1
-#define EAPOL_START_1X 2
-
-#define MIX_CIPHER_WPA_TKIP_ON(x) (((x) & 0x08) != 0)
-#define MIX_CIPHER_WPA_AES_ON(x) (((x) & 0x04) != 0)
-#define MIX_CIPHER_WPA2_TKIP_ON(x) (((x) & 0x02) != 0)
-#define MIX_CIPHER_WPA2_AES_ON(x) (((x) & 0x01) != 0)
-
-#define ROUND_UP(__x, __y) \
- (((ULONG)((__x)+((__y)-1))) & ((ULONG)~((__y)-1)))
-
-#define ADD_ONE_To_64BIT_VAR(_V) \
-{ \
- UCHAR cnt = LEN_KEY_DESC_REPLAY; \
- do \
- { \
- cnt--; \
- _V[cnt]++; \
- if (cnt == 0) \
- break; \
- }while (_V[cnt] == 0); \
-}
-
-#define IS_WPA_CAPABILITY(a) (((a) >= Ndis802_11AuthModeWPA) && ((a) <= Ndis802_11AuthModeWPA1PSKWPA2PSK))
-
-// EAPOL Key Information definition within Key descriptor format
-typedef struct PACKED _KEY_INFO
-{
- UCHAR KeyMic:1;
- UCHAR Secure:1;
- UCHAR Error:1;
- UCHAR Request:1;
- UCHAR EKD_DL:1; // EKD for AP; DL for STA
- UCHAR Rsvd:3;
- UCHAR KeyDescVer:3;
- UCHAR KeyType:1;
- UCHAR KeyIndex:2;
- UCHAR Install:1;
- UCHAR KeyAck:1;
-} KEY_INFO, *PKEY_INFO;
-
-// EAPOL Key descriptor format
-typedef struct PACKED _KEY_DESCRIPTER
-{
- UCHAR Type;
- KEY_INFO KeyInfo;
- UCHAR KeyLength[2];
- UCHAR ReplayCounter[LEN_KEY_DESC_REPLAY];
- UCHAR KeyNonce[LEN_KEY_DESC_NONCE];
- UCHAR KeyIv[LEN_KEY_DESC_IV];
- UCHAR KeyRsc[LEN_KEY_DESC_RSC];
- UCHAR KeyId[LEN_KEY_DESC_ID];
- UCHAR KeyMic[LEN_KEY_DESC_MIC];
- UCHAR KeyDataLen[2];
- UCHAR KeyData[MAX_LEN_OF_RSNIE];
-} KEY_DESCRIPTER, *PKEY_DESCRIPTER;
-
-typedef struct PACKED _EAPOL_PACKET
-{
- UCHAR ProVer;
- UCHAR ProType;
- UCHAR Body_Len[2];
- KEY_DESCRIPTER KeyDesc;
-} EAPOL_PACKET, *PEAPOL_PACKET;
-
-//802.11i D10 page 83
-typedef struct PACKED _GTK_ENCAP
-{
- UCHAR Kid:2;
- UCHAR tx:1;
- UCHAR rsv:5;
- UCHAR rsv1;
- UCHAR GTK[TKIP_GTK_LENGTH];
-} GTK_ENCAP, *PGTK_ENCAP;
-
-typedef struct PACKED _KDE_ENCAP
-{
- UCHAR Type;
- UCHAR Len;
- UCHAR OUI[3];
- UCHAR DataType;
- GTK_ENCAP GTKEncap;
-} KDE_ENCAP, *PKDE_ENCAP;
-
-// For WPA1
-typedef struct PACKED _RSNIE {
- UCHAR oui[4];
- USHORT version;
- UCHAR mcast[4];
- USHORT ucount;
- struct PACKED {
- UCHAR oui[4];
- }ucast[1];
-} RSNIE, *PRSNIE;
-
-// For WPA2
-typedef struct PACKED _RSNIE2 {
- USHORT version;
- UCHAR mcast[4];
- USHORT ucount;
- struct PACKED {
- UCHAR oui[4];
- }ucast[1];
-} RSNIE2, *PRSNIE2;
-
-// AKM Suite
-typedef struct PACKED _RSNIE_AUTH {
- USHORT acount;
- struct PACKED {
- UCHAR oui[4];
- }auth[1];
-} RSNIE_AUTH,*PRSNIE_AUTH;
-
-typedef union PACKED _RSN_CAPABILITIES {
- struct PACKED {
- USHORT PreAuth:1;
- USHORT No_Pairwise:1;
- USHORT PTKSA_R_Counter:2;
- USHORT GTKSA_R_Counter:2;
- USHORT Rsvd:10;
- } field;
- USHORT word;
-} RSN_CAPABILITIES, *PRSN_CAPABILITIES;
-
-typedef struct PACKED _EAP_HDR {
- UCHAR ProVer;
- UCHAR ProType;
- UCHAR Body_Len[2];
- UCHAR code;
- UCHAR identifier;
- UCHAR length[2]; // including code and identifier, followed by length-2 octets of data
-} EAP_HDR, *PEAP_HDR;
-
-// For supplicant state machine states. 802.11i Draft 4.1, p. 97
-// We simplified it
-typedef enum _WpaState
-{
- SS_NOTUSE, // 0
- SS_START, // 1
- SS_WAIT_MSG_3, // 2
- SS_WAIT_GROUP, // 3
- SS_FINISH, // 4
- SS_KEYUPDATE, // 5
-} WPA_STATE;
-
-//
-// The definition of the cipher combination
-//
-// bit3 bit2 bit1 bit0
-// +------------+------------+
-// | WPA | WPA2 |
-// +------+-----+------+-----+
-// | TKIP | AES | TKIP | AES |
-// | 0 | 1 | 1 | 0 | -> 0x06
-// | 0 | 1 | 1 | 1 | -> 0x07
-// | 1 | 0 | 0 | 1 | -> 0x09
-// | 1 | 0 | 1 | 1 | -> 0x0B
-// | 1 | 1 | 0 | 1 | -> 0x0D
-// | 1 | 1 | 1 | 0 | -> 0x0E
-// | 1 | 1 | 1 | 1 | -> 0x0F
-// +------+-----+------+-----+
-//
-typedef enum _WpaMixPairCipher
-{
- MIX_CIPHER_NOTUSE = 0x00,
- WPA_NONE_WPA2_TKIPAES = 0x03, // WPA2-TKIPAES
- WPA_AES_WPA2_TKIP = 0x06,
- WPA_AES_WPA2_TKIPAES = 0x07,
- WPA_TKIP_WPA2_AES = 0x09,
- WPA_TKIP_WPA2_TKIPAES = 0x0B,
- WPA_TKIPAES_WPA2_NONE = 0x0C, // WPA-TKIPAES
- WPA_TKIPAES_WPA2_AES = 0x0D,
- WPA_TKIPAES_WPA2_TKIP = 0x0E,
- WPA_TKIPAES_WPA2_TKIPAES = 0x0F,
-} WPA_MIX_PAIR_CIPHER;
-
-typedef struct PACKED _RSN_IE_HEADER_STRUCT {
- UCHAR Eid;
- UCHAR Length;
- USHORT Version; // Little endian format
-} RSN_IE_HEADER_STRUCT, *PRSN_IE_HEADER_STRUCT;
-
-// Cipher suite selector types
-typedef struct PACKED _CIPHER_SUITE_STRUCT {
- UCHAR Oui[3];
- UCHAR Type;
-} CIPHER_SUITE_STRUCT, *PCIPHER_SUITE_STRUCT;
-
-// Authentication and Key Management suite selector
-typedef struct PACKED _AKM_SUITE_STRUCT {
- UCHAR Oui[3];
- UCHAR Type;
-} AKM_SUITE_STRUCT, *PAKM_SUITE_STRUCT;
-
-// RSN capability
-typedef struct PACKED _RSN_CAPABILITY {
- USHORT Rsv:10;
- USHORT GTKSAReplayCnt:2;
- USHORT PTKSAReplayCnt:2;
- USHORT NoPairwise:1;
- USHORT PreAuth:1;
-} RSN_CAPABILITY, *PRSN_CAPABILITY;
-
-#endif
+#include "../rt2860/wpa.h"
git.openpandora.org / pandora-kernel.git / commitdiff