[MIPS] IP27: Remove #if 0'ed code.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/include/asm-mips/sn/klconfig.h b/include/asm-mips/sn/klconfig.h
index ec469a3..5deaf1c 100644 (file)
--- a/include/asm-mips/sn/klconfig.h
+++ b/include/asm-mips/sn/klconfig.h
@@ -69,13 +69,6 @@ typedef s32 klconf_off_t;
 /*
  * Some IMPORTANT OFFSETS. These are the offsets on all NODES.
  */
-#if 0
-#define RAMBASE                 0
-#define ARCSSPB_OFF             0x1000 /* shift it to sys/arcs/spb.h */
-
-#define OFF_HWGRAPH            0
-#endif
-
 #define        MAX_MODULE_ID           255
 #define SIZE_PAD               4096 /* 4k padding for structures */
 /*
@@ -164,10 +157,6 @@ typedef struct kl_config_hdr {
 
 
 #define KL_CONFIG_HDR(_nasid)  ((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid)))
-#if 0
-#define KL_CONFIG_MALLOC_HDR(_nasid) \
-                                (KL_CONFIG_HDR(_nasid)->ch_malloc_hdr)
-#endif
 #define KL_CONFIG_INFO_OFFSET(_nasid)                                  \
         (KL_CONFIG_HDR(_nasid)->ch_board_info)
 #define KL_CONFIG_INFO_SET_OFFSET(_nasid, _off)                                \
@@ -601,18 +590,6 @@ typedef struct klport_s {
        klconf_off_t    port_offset;
 } klport_t;
 
-#if 0
-/*
- * This is very similar to the klport_s but instead of having a componant
- * offset it has a board offset.
- */
-typedef struct klxbow_port_s {
-       nasid_t         port_nasid;
-       unsigned char   port_flag;
-       klconf_off_t    board_offset;
-} klxbow_port_t;
-#endif
-
 typedef struct klcpu_s {                          /* CPU */
        klinfo_t        cpu_info;
        unsigned short  cpu_prid;       /* Processor PRID value */

diff --git a/include/asm-mips/sn/sn0/hubio.h b/include/asm-mips/sn/sn0/hubio.h
index f314da2..ef91b33 100644 (file)
--- a/include/asm-mips/sn/sn0/hubio.h
+++ b/include/asm-mips/sn/sn0/hubio.h
@@ -486,22 +486,6 @@ typedef union h1_icrba_u {
 #define ICRBN_A_CERR_SHFT      54
 #define ICRBN_A_ERR_MASK       0x3ff
 
-#if 0  /* Disabled, this causes namespace polution and break allmodconfig */
-/*
- * Easy access macros.
- */
-#define        a_error         icrba_fields_s.error
-#define        a_ecode         icrba_fields_s.ecode
-#define        a_lnetuce       icrba_fields_s.lnetuce
-#define        a_mark          icrba_fields_s.mark
-#define        a_xerr          icrba_fields_s.xerr
-#define        a_sidn          icrba_fields_s.sidn
-#define        a_tnum          icrba_fields_s.tnum
-#define        a_addr          icrba_fields_s.addr
-#define        a_valid         icrba_fields_s.valid
-#define        a_iow           icrba_fields_s.iow
-#endif
-
 #endif /* !__ASSEMBLY__ */
 
 #define        IIO_ICRB_ADDR_SHFT      2       /* Shift to get proper address */

diff --git a/include/asm-mips/sn/sn0/hubpi.h b/include/asm-mips/sn/sn0/hubpi.h
index 355bba8..e39f5f9 100644 (file)
--- a/include/asm-mips/sn/sn0/hubpi.h
+++ b/include/asm-mips/sn/sn0/hubpi.h
@@ -398,24 +398,6 @@ typedef u64        rtc_time_t;
 
 /* PI_RT_FILTER_CTRL mask and shift definitions */
 
-#if 0
-/*
- * XXX - This register's definition has changed, but it's only implemented
- * in Hub 2.
- */
-#define PRFC_DROP_COUNT_SHFT   27
-#define PRFC_DROP_COUNT_MASK   (UINT64_CAST 0x3ff << 27)
-#define PRFC_DROP_CTR_SHFT     18
-#define PRFC_DROP_CTR_MASK     (UINT64_CAST 0x1ff << 18)
-#define PRFC_MASK_ENABLE_SHFT  10
-#define PRFC_MASK_ENABLE_MASK  (UINT64_CAST 0x7f << 10)
-#define PRFC_MASK_CTR_SHFT     2
-#define PRFC_MASK_CTR_MASK     (UINT64_CAST 0xff << 2)
-#define PRFC_OFFSET_SHFT       0
-#define PRFC_OFFSET_MASK       (UINT64_CAST 3)
-#endif /* 0 */
-
-
 /*
  * Bits for NACK_CNT_A/B and NACK_CMP
  */