[ARM] Kirkwood: Correct MPP for SATA activity/presence LEDs of QNAP TS-119/TS-219.

For the QNAP TS-119 and TS-219 the wrong MPPs were used for the SATA
activity/presence LEDs. The new settings make these LEDs work as
expected.

Signed-off-by: Thomas Reitmayr <treitmayr@devbase.at>
Tested-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>

diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index dda5743..01aa213 100644 (file)
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -142,6 +142,8 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
        MPP1_SPI_MOSI,
        MPP2_SPI_SCK,
        MPP3_SPI_MISO,
+       MPP4_SATA1_ACTn,
+       MPP5_SATA0_ACTn,
        MPP8_TW_SDA,
        MPP9_TW_SCK,
        MPP10_UART0_TXD,
@@ -150,10 +152,6 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
        MPP14_UART1_RXD,        /* PIC controller */
        MPP15_GPIO,             /* USB Copy button */
        MPP16_GPIO,             /* Reset button */
-       MPP20_SATA1_ACTn,
-       MPP21_SATA0_ACTn,
-       MPP22_SATA1_PRESENTn,
-       MPP23_SATA0_PRESENTn,
        0
 };