bnx2x: Fix 848xx duplex settings
authorYaniv Rosner <yanivr@broadcom.com>
Sun, 22 Sep 2013 11:59:26 +0000 (14:59 +0300)
committerDavid S. Miller <davem@davemloft.net>
Mon, 23 Sep 2013 06:10:20 +0000 (02:10 -0400)
On 848xx PHY (10G-baseT), half-duplex was always advertised regardless of the
actual configuration. Change the 848xx duplex settings to advertise half-duplex
only if configured.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

index dc67566..5146822 100644 (file)
@@ -9765,32 +9765,41 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy,
                         MDIO_AN_DEVAD, MDIO_AN_REG_8481_1000T_CTRL,
                         an_1000_val);
 
-       /* set 100 speed advertisement */
-       if ((phy->req_line_speed == SPEED_AUTO_NEG) &&
-            (phy->speed_cap_mask &
-             (PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL |
-              PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF))) {
-               an_10_100_val |= (1<<7);
-               /* Enable autoneg and restart autoneg for legacy speeds */
-               autoneg_val |= (1<<9 | 1<<12);
-
-               if (phy->req_duplex == DUPLEX_FULL)
+       /* Set 10/100 speed advertisement */
+       if (phy->req_line_speed == SPEED_AUTO_NEG) {
+               if (phy->speed_cap_mask &
+                   PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) {
+                       /* Enable autoneg and restart autoneg for legacy speeds
+                        */
+                       autoneg_val |= (1<<9 | 1<<12);
                        an_10_100_val |= (1<<8);
-               DP(NETIF_MSG_LINK, "Advertising 100M\n");
-       }
-       /* set 10 speed advertisement */
-       if (((phy->req_line_speed == SPEED_AUTO_NEG) &&
-            (phy->speed_cap_mask &
-             (PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL |
-              PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)) &&
-            (phy->supported &
-             (SUPPORTED_10baseT_Half |
-              SUPPORTED_10baseT_Full)))) {
-               an_10_100_val |= (1<<5);
-               autoneg_val |= (1<<9 | 1<<12);
-               if (phy->req_duplex == DUPLEX_FULL)
+                       DP(NETIF_MSG_LINK, "Advertising 100M-FD\n");
+               }
+
+               if (phy->speed_cap_mask &
+                   PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) {
+                       /* Enable autoneg and restart autoneg for legacy speeds
+                        */
+                       autoneg_val |= (1<<9 | 1<<12);
+                       an_10_100_val |= (1<<7);
+                       DP(NETIF_MSG_LINK, "Advertising 100M-HD\n");
+               }
+
+               if ((phy->speed_cap_mask &
+                    PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) &&
+                   (phy->supported & SUPPORTED_10baseT_Full)) {
                        an_10_100_val |= (1<<6);
-               DP(NETIF_MSG_LINK, "Advertising 10M\n");
+                       autoneg_val |= (1<<9 | 1<<12);
+                       DP(NETIF_MSG_LINK, "Advertising 10M-FD\n");
+               }
+
+               if ((phy->speed_cap_mask &
+                    PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) &&
+                   (phy->supported & SUPPORTED_10baseT_Half)) {
+                       an_10_100_val |= (1<<5);
+                       autoneg_val |= (1<<9 | 1<<12);
+                       DP(NETIF_MSG_LINK, "Advertising 10M-HD\n");
+               }
        }
 
        /* Only 10/100 are allowed to work in FORCE mode */