--- /dev/null
+/*
+ * mx27vis_wm8974.c -- SoC audio for mx27vis
+ *
+ * Copyright 2009 Vista Silicon S.L.
+ * Author: Javier Martin
+ * javier.martin@vista-silicon.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+
+#include "../codecs/wm8974.h"
+#include "mx1_mx2-pcm.h"
+#include "mxc-ssi.h"
+#include <mach/gpio.h>
+#include <mach/iomux.h>
+
+#define IGNORED_ARG 0
+
+
+static struct snd_soc_card mx27vis;
+
+/**
+ * This function connects SSI1 (HPCR1) as slave to
+ * SSI1 external signals (PPCR1)
+ * As slave, HPCR1 must set TFSDIR and TCLKDIR as inputs from
+ * port 4
+ */
+void audmux_connect_1_4(void)
+{
+ pr_debug("AUDMUX: normal operation mode\n");
+ /* Reset HPCR1 and PPCR1 */
+
+ DAM_HPCR1 = 0x00000000;
+ DAM_PPCR1 = 0x00000000;
+
+ /* set to synchronous */
+ DAM_HPCR1 |= AUDMUX_HPCR_SYN;
+ DAM_PPCR1 |= AUDMUX_PPCR_SYN;
+
+
+ /* set Rx sources 1 <--> 4 */
+ DAM_HPCR1 |= AUDMUX_HPCR_RXDSEL(3); /* port 4 */
+ DAM_PPCR1 |= AUDMUX_PPCR_RXDSEL(0); /* port 1 */
+
+ /* set Tx frame and Clock direction and source 4 --> 1 output */
+ DAM_HPCR1 |= AUDMUX_HPCR_TFSDIR | AUDMUX_HPCR_TCLKDIR;
+ DAM_HPCR1 |= AUDMUX_HPCR_TFCSEL(3); /* TxDS and TxCclk from port 4 */
+
+ return;
+}
+
+static int mx27vis_hifi_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ unsigned int pll_out = 0, bclk = 0, fmt = 0, mclk = 0;
+ int ret = 0;
+
+ /*
+ * The WM8974 is better at generating accurate audio clocks than the
+ * MX27 SSI controller, so we will use it as master when we can.
+ */
+ switch (params_rate(params)) {
+ case 8000:
+ fmt = SND_SOC_DAIFMT_CBM_CFM;
+ mclk = WM8974_MCLKDIV_12;
+ pll_out = 24576000;
+ break;
+ case 16000:
+ fmt = SND_SOC_DAIFMT_CBM_CFM;
+ pll_out = 12288000;
+ break;
+ case 48000:
+ fmt = SND_SOC_DAIFMT_CBM_CFM;
+ bclk = WM8974_BCLKDIV_4;
+ pll_out = 12288000;
+ break;
+ case 96000:
+ fmt = SND_SOC_DAIFMT_CBM_CFM;
+ bclk = WM8974_BCLKDIV_2;
+ pll_out = 12288000;
+ break;
+ case 11025:
+ fmt = SND_SOC_DAIFMT_CBM_CFM;
+ bclk = WM8974_BCLKDIV_16;
+ pll_out = 11289600;
+ break;
+ case 22050:
+ fmt = SND_SOC_DAIFMT_CBM_CFM;
+ bclk = WM8974_BCLKDIV_8;
+ pll_out = 11289600;
+ break;
+ case 44100:
+ fmt = SND_SOC_DAIFMT_CBM_CFM;
+ bclk = WM8974_BCLKDIV_4;
+ mclk = WM8974_MCLKDIV_2;
+ pll_out = 11289600;
+ break;
+ case 88200:
+ fmt = SND_SOC_DAIFMT_CBM_CFM;
+ bclk = WM8974_BCLKDIV_2;
+ pll_out = 11289600;
+ break;
+ }
+
+ /* set codec DAI configuration */
+ ret = codec_dai->ops->set_fmt(codec_dai,
+ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_IF |
+ SND_SOC_DAIFMT_SYNC | fmt);
+ if (ret < 0) {
+ printk(KERN_ERR "Error from codec DAI configuration\n");
+ return ret;
+ }
+
+ /* set cpu DAI configuration */
+ ret = cpu_dai->ops->set_fmt(cpu_dai,
+ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_SYNC | fmt);
+ if (ret < 0) {
+ printk(KERN_ERR "Error from cpu DAI configuration\n");
+ return ret;
+ }
+
+ /* Put DC field of STCCR to 1 (not zero) */
+ ret = cpu_dai->ops->set_tdm_slot(cpu_dai, 0, 2);
+
+ /* set the SSI system clock as input */
+ ret = cpu_dai->ops->set_sysclk(cpu_dai, IMX_SSP_SYS_CLK, 0,
+ SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ printk(KERN_ERR "Error when setting system SSI clk\n");
+ return ret;
+ }
+
+ /* set codec BCLK division for sample rate */
+ ret = codec_dai->ops->set_clkdiv(codec_dai, WM8974_BCLKDIV, bclk);
+ if (ret < 0) {
+ printk(KERN_ERR "Error when setting BCLK division\n");
+ return ret;
+ }
+
+
+ /* codec PLL input is 25 MHz */
+ ret = codec_dai->ops->set_pll(codec_dai, IGNORED_ARG,
+ 25000000, pll_out);
+ if (ret < 0) {
+ printk(KERN_ERR "Error when setting PLL input\n");
+ return ret;
+ }
+
+ /*set codec MCLK division for sample rate */
+ ret = codec_dai->ops->set_clkdiv(codec_dai, WM8974_MCLKDIV, mclk);
+ if (ret < 0) {
+ printk(KERN_ERR "Error when setting MCLK division\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mx27vis_hifi_hw_free(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+
+ /* disable the PLL */
+ return codec_dai->ops->set_pll(codec_dai, IGNORED_ARG, 0, 0);
+}
+
+/*
+ * mx27vis WM8974 HiFi DAI opserations.
+ */
+static struct snd_soc_ops mx27vis_hifi_ops = {
+ .hw_params = mx27vis_hifi_hw_params,
+ .hw_free = mx27vis_hifi_hw_free,
+};
+
+
+static int mx27vis_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ return 0;
+}
+
+static int mx27vis_resume(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static int mx27vis_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+
+ ret = get_ssi_clk(0, &pdev->dev);
+
+ if (ret < 0) {
+ printk(KERN_ERR "%s: cant get ssi clock\n", __func__);
+ return ret;
+ }
+
+
+ return 0;
+}
+
+static int mx27vis_remove(struct platform_device *pdev)
+{
+ put_ssi_clk(0);
+ return 0;
+}
+
+static struct snd_soc_dai_link mx27vis_dai[] = {
+{ /* Hifi Playback*/
+ .name = "WM8974",
+ .stream_name = "WM8974 HiFi",
+ .cpu_dai = &imx_ssi_pcm_dai[0],
+ .codec_dai = &wm8974_dai,
+ .ops = &mx27vis_hifi_ops,
+},
+};
+
+static struct snd_soc_card mx27vis = {
+ .name = "mx27vis",
+ .platform = &mx1_mx2_soc_platform,
+ .probe = mx27vis_probe,
+ .remove = mx27vis_remove,
+ .suspend_pre = mx27vis_suspend,
+ .resume_post = mx27vis_resume,
+ .dai_link = mx27vis_dai,
+ .num_links = ARRAY_SIZE(mx27vis_dai),
+};
+
+static struct snd_soc_device mx27vis_snd_devdata = {
+ .card = &mx27vis,
+ .codec_dev = &soc_codec_dev_wm8974,
+};
+
+static struct platform_device *mx27vis_snd_device;
+
+/* Temporal definition of board specific behaviour */
+void gpio_ssi_active(int ssi_num)
+{
+ int ret = 0;
+
+ unsigned int ssi1_pins[] = {
+ PC20_PF_SSI1_FS,
+ PC21_PF_SSI1_RXD,
+ PC22_PF_SSI1_TXD,
+ PC23_PF_SSI1_CLK,
+ };
+ unsigned int ssi2_pins[] = {
+ PC24_PF_SSI2_FS,
+ PC25_PF_SSI2_RXD,
+ PC26_PF_SSI2_TXD,
+ PC27_PF_SSI2_CLK,
+ };
+ if (ssi_num == 0)
+ ret = mxc_gpio_setup_multiple_pins(ssi1_pins,
+ ARRAY_SIZE(ssi1_pins), "USB OTG");
+ else
+ ret = mxc_gpio_setup_multiple_pins(ssi2_pins,
+ ARRAY_SIZE(ssi2_pins), "USB OTG");
+ if (ret)
+ printk(KERN_ERR "Error requesting ssi %x pins\n", ssi_num);
+}
+
+
+static int __init mx27vis_init(void)
+{
+ int ret;
+
+ mx27vis_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!mx27vis_snd_device)
+ return -ENOMEM;
+
+ platform_set_drvdata(mx27vis_snd_device, &mx27vis_snd_devdata);
+ mx27vis_snd_devdata.dev = &mx27vis_snd_device->dev;
+ ret = platform_device_add(mx27vis_snd_device);
+
+ if (ret) {
+ printk(KERN_ERR "ASoC: Platform device allocation failed\n");
+ platform_device_put(mx27vis_snd_device);
+ }
+
+ /* WM8974 uses SSI1 (HPCR1) via AUDMUX port 4 for audio (PPCR1) */
+ gpio_ssi_active(0);
+ audmux_connect_1_4();
+
+ return ret;
+}
+
+static void __exit mx27vis_exit(void)
+{
+ /* We should call some "ssi_gpio_inactive()" properly */
+}
+
+module_init(mx27vis_init);
+module_exit(mx27vis_exit);
+
+
+MODULE_AUTHOR("Javier Martin, javier.martin@vista-silicon.com");
+MODULE_DESCRIPTION("ALSA SoC WM8974 mx27vis");
+MODULE_LICENSE("GPL");
git.openpandora.org / pandora-kernel.git / commitdiff