* 'at91-3.4-cleanup2-DT2' of git://github.com/at91linux/linux-at91: (23 commits)
ARM: at91: dt: enable usb ehci for sam9g45 and sam9x5
ARM: at91: usb ehci add dt support
ARM: at91: dt: enable usb ohci for sam9g20, sam9g45 amd sam9x5
ARM: at91: usb ohci add dt support
ARM: at91: add Shutdown Controller (SHDWC) DT support
ARM: at91: add ram controller DT support
ARM: at91: add RSTC (Reset Controller) dt support
ARM: at91: always enable sam9 restart
ARM: at91: add pmc DT support
ARM: at91/dt: add specific DT soc init
ARM: at91/dt: add Calao DAB-MMX daugther board support for USB-A9G20
ARM: at91: sam9x5 add i2c DT support
ARM: at91: sam9g45 add i2c DT support
ARM: at91: usb_a9g20 add DT i2c support
ARM: at91: sam9g20 add i2c DT support
i2c/gpio: add DT support
ARM: at91: sam9x5 add nand support
atmel/nand: add DT support
of/mtd/nand: add generic bindings and helpers
of: introduce helper to manage boolean
...
i.MX6 Quad SABRE Lite Board
Required root node properties:
- compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
+
+Generic i.MX boards
+-------------------
+
+No iomux setup is done for these boards, so this must have been configured
+by the bootloader for boards to work with the generic bindings.
+
+i.MX27 generic board
+Required root node properties:
+ - compatible = "fsl,imx27";
+
+i.MX51 generic board
+Required root node properties:
+ - compatible = "fsl,imx51";
+
+i.MX53 generic board
+Required root node properties:
+ - compatible = "fsl,imx53";
+
+i.MX6q generic board
+Required root node properties:
+ - compatible = "fsl,imx6q";
--- /dev/null
+Marvell Platforms Device Tree Bindings
+----------------------------------------------------
+
+PXA168 Aspenite Board
+Required root node properties:
+ - compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168";
--- /dev/null
+* OMAP Interrupt Controller
+
+OMAP2/3 are using a TI interrupt controller that can support several
+configurable number of interrupts.
+
+Main node required properties:
+
+- compatible : should be:
+ "ti,omap2-intc"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The type shall be a <u32> and the value shall be 1.
+
+ The cell contains the interrupt number in the range [0-128].
+- ti,intc-size: Number of interrupts handled by the interrupt controller.
+- reg: physical base address and size of the intc registers map.
+
+Example:
+
+ intc: interrupt-controller@1 {
+ compatible = "ti,omap2-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ ti,intc-size = <96>;
+ reg = <0x48200000 0x1000>;
+ };
+
--- /dev/null
+Embedded Memory Controller
+
+Properties:
+- name : Should be emc
+- #address-cells : Should be 1
+- #size-cells : Should be 0
+- compatible : Should contain "nvidia,tegra20-emc".
+- reg : Offset and length of the register set for the device
+- nvidia,use-ram-code : If present, the sub-nodes will be addressed
+ and chosen using the ramcode board selector. If omitted, only one
+ set of tables can be present and said tables will be used
+ irrespective of ram-code configuration.
+
+Child device nodes describe the memory settings for different configurations and clock rates.
+
+Example:
+
+ emc@7000f400 {
+ #address-cells = < 1 >;
+ #size-cells = < 0 >;
+ compatible = "nvidia,tegra20-emc";
+ reg = <0x7000f4000 0x200>;
+ }
+
+
+Embedded Memory Controller ram-code table
+
+If the emc node has the nvidia,use-ram-code property present, then the
+next level of nodes below the emc table are used to specify which settings
+apply for which ram-code settings.
+
+If the emc node lacks the nvidia,use-ram-code property, this level is omitted
+and the tables are stored directly under the emc node (see below).
+
+Properties:
+
+- name : Should be emc-tables
+- nvidia,ram-code : the binary representation of the ram-code board strappings
+ for which this node (and children) are valid.
+
+
+
+Embedded Memory Controller configuration table
+
+This is a table containing the EMC register settings for the various
+operating speeds of the memory controller. They are always located as
+subnodes of the emc controller node.
+
+There are two ways of specifying which tables to use:
+
+* The simplest is if there is just one set of tables in the device tree,
+ and they will always be used (based on which frequency is used).
+ This is the preferred method, especially when firmware can fill in
+ this information based on the specific system information and just
+ pass it on to the kernel.
+
+* The slightly more complex one is when more than one memory configuration
+ might exist on the system. The Tegra20 platform handles this during
+ early boot by selecting one out of possible 4 memory settings based
+ on a 2-pin "ram code" bootstrap setting on the board. The values of
+ these strappings can be read through a register in the SoC, and thus
+ used to select which tables to use.
+
+Properties:
+- name : Should be emc-table
+- compatible : Should contain "nvidia,tegra20-emc-table".
+- reg : either an opaque enumerator to tell different tables apart, or
+ the valid frequency for which the table should be used (in kHz).
+- clock-frequency : the clock frequency for the EMC at which this
+ table should be used (in kHz).
+- nvidia,emc-registers : a 46 word array of EMC registers to be programmed
+ for operation at the 'clock-frequency' setting.
+ The order and contents of the registers are:
+ RC, RFC, RAS, RP, R2W, W2R, R2P, W2P, RD_RCD, WR_RCD, RRD, REXT,
+ WDV, QUSE, QRST, QSAFE, RDV, REFRESH, BURST_REFRESH_NUM, PDEX2WR,
+ PDEX2RD, PCHG2PDEN, ACT2PDEN, AR2PDEN, RW2PDEN, TXSR, TCKE, TFAW,
+ TRPAB, TCLKSTABLE, TCLKSTOP, TREFBW, QUSE_EXTRA, FBIO_CFG6, ODT_WRITE,
+ ODT_READ, FBIO_CFG5, CFG_DIG_DLL, DLL_XFORM_DQS, DLL_XFORM_QUSE,
+ ZCAL_REF_CNT, ZCAL_WAIT_CNT, AUTO_CAL_INTERVAL, CFG_CLKTRIM_0,
+ CFG_CLKTRIM_1, CFG_CLKTRIM_2
+
+ emc-table@166000 {
+ reg = <166000>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = < 166000 >;
+ nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 >;
+ };
+
+ emc-table@333000 {
+ reg = <333000>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = < 333000 >;
+ nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 >;
+ };
--- /dev/null
+NVIDIA Tegra Power Management Controller (PMC)
+
+Properties:
+- name : Should be pmc
+- compatible : Should contain "nvidia,tegra<chip>-pmc".
+- reg : Offset and length of the register set for the device
+- nvidia,invert-interrupt : If present, inverts the PMU interrupt signal.
+ The PMU is an external Power Management Unit, whose interrupt output
+ signal is fed into the PMC. This signal is optionally inverted, and then
+ fed into the ARM GIC. The PMC is not involved in the detection or
+ handling of this interrupt signal, merely its inversion.
+
+Example:
+
+pmc@7000f400 {
+ compatible = "nvidia,tegra20-pmc";
+ reg = <0x7000e400 0x400>;
+ nvidia,invert-interrupt;
+};
--- /dev/null
+ARM Versatile Express boards family
+-----------------------------------
+
+ARM's Versatile Express platform consists of a motherboard and one
+or more daughterboards (tiles). The motherboard provides a set of
+peripherals. Processor and RAM "live" on the tiles.
+
+The motherboard and each core tile should be described by a separate
+Device Tree source file, with the tile's description including
+the motherboard file using a /include/ directive. As the motherboard
+can be initialized in one of two different configurations ("memory
+maps"), care must be taken to include the correct one.
+
+Required properties in the root node:
+- compatible value:
+ compatible = "arm,vexpress,<model>", "arm,vexpress";
+ where <model> is the full tile model name (as used in the tile's
+ Technical Reference Manual), eg.:
+ - for Coretile Express A5x2 (V2P-CA5s):
+ compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
+ - for Coretile Express A9x4 (V2P-CA9):
+ compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
+ If a tile comes in several variants or can be used in more then one
+ configuration, the compatible value should be:
+ compatible = "arm,vexpress,<model>,<variant>", \
+ "arm,vexpress,<model>", "arm,vexpress";
+ eg:
+ - Coretile Express A15x2 (V2P-CA15) with Tech Chip 1:
+ compatible = "arm,vexpress,v2p-ca15,tc1", \
+ "arm,vexpress,v2p-ca15", "arm,vexpress";
+ - LogicTile Express 13MG (V2F-2XV6) running Cortex-A7 (3 cores) SMM:
+ compatible = "arm,vexpress,v2f-2xv6,ca7x3", \
+ "arm,vexpress,v2f-2xv6", "arm,vexpress";
+
+Optional properties in the root node:
+- tile model name (use name from the tile's Technical Reference
+ Manual, eg. "V2P-CA5s")
+ model = "<model>";
+- tile's HBI number (unique ARM's board model ID, visible on the
+ PCB's silkscreen) in hexadecimal transcription:
+ arm,hbi = <0xhbi>
+ eg:
+ - for Coretile Express A5x2 (V2P-CA5s) HBI-0191:
+ arm,hbi = <0x191>;
+ - Coretile Express A9x4 (V2P-CA9) HBI-0225:
+ arm,hbi = <0x225>;
+
+Top-level standard "cpus" node is required. It must contain a node
+with device_type = "cpu" property for every available core, eg.:
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ reg = <0>;
+ };
+ };
+
+The motherboard description file provides a single "motherboard" node
+using 2 address cells corresponding to the Static Memory Bus used
+between the motherboard and the tile. The first cell defines the Chip
+Select (CS) line number, the second cell address offset within the CS.
+All interrupt lines between the motherboard and the tile are active
+high and are described using single cell.
+
+Optional properties of the "motherboard" node:
+- motherboard's memory map variant:
+ arm,v2m-memory-map = "<name>";
+ where name is one of:
+ - "rs1" - for RS1 map (i.a. peripherals on CS3); this map is also
+ referred to as "ARM Cortex-A Series memory map":
+ arm,v2m-memory-map = "rs1";
+ When this property is missing, the motherboard is using the original
+ memory map (also known as the "Legacy memory map", primarily used
+ with the original CoreTile Express A9x4) with peripherals on CS7.
+
+Motherboard .dtsi files provide a set of labelled peripherals that
+can be used to obtain required phandle in the tile's "aliases" node:
+- UARTs, note that the numbers correspond to the physical connectors
+ on the motherboard's back panel:
+ v2m_serial0, v2m_serial1, v2m_serial2 and v2m_serial3
+- I2C controllers:
+ v2m_i2c_dvi and v2m_i2c_pcie
+- SP804 timers:
+ v2m_timer01 and v2m_timer23
+
+Current Linux implementation requires a "arm,v2m_timer" alias
+pointing at one of the motherboard's SP804 timers, if it is to be
+used as the system timer. This alias should be defined in the
+motherboard files.
+
+The tile description must define "ranges", "interrupt-map-mask" and
+"interrupt-map" properties to translate the motherboard's address
+and interrupt space into one used by the tile's processor.
+
+Abbreviated example:
+
+/dts-v1/;
+
+/ {
+ model = "V2P-CA5s";
+ arm,hbi = <0x225>;
+ compatible = "arm,vexpress-v2p-ca5s", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen { };
+
+ aliases {
+ serial0 = &v2m_serial0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ reg = <0>;
+ };
+ };
+
+ gic: interrupt-controller@2c001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x2c001000 0x1000>,
+ <0x2c000100 0x100>;
+ };
+
+ motherboard {
+ /* CS0 is visible at 0x08000000 */
+ ranges = <0 0 0x08000000 0x04000000>;
+ interrupt-map-mask = <0 0 63>;
+ /* Active high IRQ 0 is connected to GIC's SPI0 */
+ interrupt-map = <0 0 0 &gic 0 0 4>;
+ };
+};
+
+/include/ "vexpress-v2m-rs1.dtsi"
--- /dev/null
+* NVIDIA Tegra APB DMA controller
+
+Required properties:
+- compatible: Should be "nvidia,<chip>-apbdma"
+- reg: Should contain DMA registers location and length. This shuld include
+ all of the per-channel registers.
+- interrupts: Should contain all of the per-channel DMA interrupts.
+
+Examples:
+
+apbdma: dma@6000a000 {
+ compatible = "nvidia,tegra20-apbdma";
+ reg = <0x6000a000 0x1200>;
+ interrupts = < 0 136 0x04
+ 0 137 0x04
+ 0 138 0x04
+ 0 139 0x04
+ 0 140 0x04
+ 0 141 0x04
+ 0 142 0x04
+ 0 143 0x04
+ 0 144 0x04
+ 0 145 0x04
+ 0 146 0x04
+ 0 147 0x04
+ 0 148 0x04
+ 0 149 0x04
+ 0 150 0x04
+ 0 151 0x04 >;
+};
Required properties:
- compatible : "nvidia,tegra20-gpio"
+- reg : Physical base address and length of the controller's registers.
+- interrupts : The interrupt outputs from the controller.
- #gpio-cells : Should be two. The first cell is the pin number and the
second cell is used to specify optional parameters:
- bit 0 specifies polarity (0 for normal, 1 for inverted)
- gpio-controller : Marks the device node as a GPIO controller.
+
+Example:
+
+gpio: gpio@6000d000 {
+ compatible = "nvidia,tegra20-gpio";
+ reg = < 0x6000d000 0x1000 >;
+ interrupts = < 0 32 0x04
+ 0 33 0x04
+ 0 34 0x04
+ 0 35 0x04
+ 0 55 0x04
+ 0 87 0x04
+ 0 89 0x04 >;
+ #gpio-cells = <2>;
+ gpio-controller;
+};
--- /dev/null
+* Marvell PXA GPIO controller
+
+Required properties:
+- compatible : Should be "mrvl,pxa-gpio" or "mrvl,mmp-gpio"
+- reg : Address and length of the register set for the device
+- interrupts : Should be the port interrupt shared by all gpio pins, if
+- interrupt-name : Should be the name of irq resource.
+ one number.
+- gpio-controller : Marks the device node as a gpio controller.
+- #gpio-cells : Should be one. It is the pin number.
+
+Example:
+
+ gpio: gpio@d4019000 {
+ compatible = "mrvl,mmp-gpio", "mrvl,pxa-gpio";
+ reg = <0xd4019000 0x1000>;
+ interrupts = <49>, <17>, <18>;
+ interrupt-name = "gpio_mux", "gpio0", "gpio1";
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
--- /dev/null
+* I2C
+
+Required properties :
+
+ - reg : Offset and length of the register set for the device
+ - compatible : should be "mrvl,mmp-twsi" where CHIP is the name of a
+ compatible processor, e.g. pxa168, pxa910, mmp2, mmp3.
+ For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required
+ as shown in the example below.
+
+Recommended properties :
+
+ - interrupts : <a b> where a is the interrupt number and b is a
+ field that represents an encoding of the sense and level
+ information for the interrupt. This should be encoded based on
+ the information in section 2) depending on the type of interrupt
+ controller you have.
+ - interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+ - mrvl,i2c-polling : Disable interrupt of i2c controller. Polling
+ status register of i2c controller instead.
+ - mrvl,i2c-fast-mode : Enable fast mode of i2c controller.
+
+Examples:
+ twsi1: i2c@d4011000 {
+ compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+ reg = <0xd4011000 0x1000>;
+ interrupts = <7>;
+ mrvl,i2c-fast-mode;
+ };
+
+ twsi2: i2c@d4025000 {
+ compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+ reg = <0xd4025000 0x1000>;
+ interrupts = <58>;
+ };
+
--- /dev/null
+* Marvell Real Time Clock controller
+
+Required properties:
+- compatible: should be "mrvl,sa1100-rtc"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: Should be two. The first interrupt number is the rtc alarm
+ interrupt and the second interrupt number is the rtc hz interrupt.
+- interrupt-names: Assign name of irq resource.
+
+Example:
+ rtc: rtc@d4010000 {
+ compatible = "mrvl,mmp-rtc";
+ reg = <0xd4010000 0x1000>;
+ interrupts = <5>, <6>;
+ interrupt-name = "rtc 1Hz", "rtc alarm";
+ };
--- /dev/null
+PXA UART controller
+
+Required properties:
+- compatible : should be "mrvl,mmp-uart" or "mrvl,pxa-uart".
F: drivers/platform/x86/wmi.c
AD1889 ALSA SOUND DRIVER
-M: Kyle McMartin <kyle@mcmartin.ca>
M: Thibaut Varene <T-Bone@parisc-linux.org>
W: http://wiki.parisc-linux.org/AD1889
L: linux-parisc@vger.kernel.org
F: include/linux/hwspinlock.h
HARMONY SOUND DRIVER
-M: Kyle McMartin <kyle@mcmartin.ca>
L: linux-parisc@vger.kernel.org
S: Maintained
F: sound/parisc/harmony.*
KERNEL AUTOMOUNTER v4 (AUTOFS4)
M: Ian Kent <raven@themaw.net>
-L: autofs@linux.kernel.org
+L: autofs@vger.kernel.org
S: Maintained
F: fs/autofs4/
M: Anton Altaparmakov <anton@tuxera.com>
L: linux-ntfs-dev@lists.sourceforge.net
W: http://www.tuxera.com/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs.git
S: Supported
F: Documentation/filesystems/ntfs.txt
F: fs/ntfs/
F: drivers/block/paride/
PARISC ARCHITECTURE
-M: Kyle McMartin <kyle@mcmartin.ca>
-M: Helge Deller <deller@gmx.de>
M: "James E.J. Bottomley" <jejb@parisc-linux.org>
+M: Helge Deller <deller@gmx.de>
L: linux-parisc@vger.kernel.org
W: http://www.parisc-linux.org/
Q: http://patchwork.kernel.org/project/linux-parisc/list/
F: drivers/mmc/host/sdhci-spear.c
SECURITY SUBSYSTEM
-M: James Morris <jmorris@namei.org>
+M: James Morris <james.l.morris@oracle.com>
L: linux-security-module@vger.kernel.org (suggested Cc:)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security.git
W: http://security.wiki.kernel.org/
SELINUX SECURITY MODULE
M: Stephen Smalley <sds@tycho.nsa.gov>
-M: James Morris <jmorris@namei.org>
+M: James Morris <james.l.morris@oracle.com>
M: Eric Paris <eparis@parisplace.org>
L: selinux@tycho.nsa.gov (subscribers-only, general discussion)
W: http://selinuxproject.org
M: Wim Van Sebroeck <wim@iguana.be>
L: linux-watchdog@vger.kernel.org
W: http://www.linux-watchdog.org/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git
+T: git git://www.linux-watchdog.org/linux-watchdog.git
S: Maintained
F: Documentation/watchdog/
F: drivers/watchdog/
VERSION = 3
PATCHLEVEL = 3
SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc6
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
--- /dev/null
+/*
+ * Copyright (C) 2011 Ilya Yanok, EmCraft Systems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+ model = "TeeJet Mt.Ventoux";
+ compatible = "teejet,mt_ventoux", "ti,omap3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ /* AM35xx doesn't have IVA */
+ soc {
+ iva {
+ status = "disabled";
+ };
+ };
+};
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
+ cpu-offset = <0x8000>;
reg = <0x10490000 0x1000>, <0x10480000 0x100>;
};
--- /dev/null
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx27.dtsi"
+
+/ {
+ model = "Phytec pcm038";
+ compatible = "phytec,imx27-pcm038", "fsl,imx27";
+
+ memory {
+ reg = <0x0 0x0>;
+ };
+
+ soc {
+ aipi@10000000 { /* aipi */
+
+ wdog@10002000 {
+ status = "okay";
+ };
+
+ uart@1000a000 {
+ fsl,uart-has-rtscts;
+ status = "okay";
+ };
+
+ uart@1000b000 {
+ fsl,uart-has-rtscts;
+ status = "okay";
+ };
+
+ uart@1000c000 {
+ fsl,uart-has-rtscts;
+ status = "okay";
+ };
+
+ fec@1002b000 {
+ status = "okay";
+ };
+
+ i2c@1001d000 {
+ clock-frequency = <400000>;
+ status = "okay";
+ at24@4c {
+ compatible = "at,24c32";
+ pagesize = <32>;
+ reg = <0x52>;
+ };
+ pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ lm75@4a {
+ compatible = "national,lm75";
+ reg = <0x4a>;
+ };
+ };
+ };
+ };
+
+ nor_flash@c0000000 {
+ compatible = "cfi-flash";
+ bank-width = <2>;
+ reg = <0xc0000000 0x02000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
--- /dev/null
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &uart6;
+ };
+
+ avic: avic-interrupt-controller@e0000000 {
+ compatible = "fsl,imx27-avic", "fsl,avic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x10040000 0x1000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc26m {
+ compatible = "fsl,imx-osc26m", "fixed-clock";
+ clock-frequency = <26000000>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&avic>;
+ ranges;
+
+ aipi@10000000 { /* AIPI1 */
+ compatible = "fsl,aipi-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x10000000 0x10000000>;
+ ranges;
+
+ wdog@10002000 {
+ compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
+ reg = <0x10002000 0x4000>;
+ interrupts = <27>;
+ status = "disabled";
+ };
+
+ uart1: uart@1000a000 {
+ compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+ reg = <0x1000a000 0x1000>;
+ interrupts = <20>;
+ status = "disabled";
+ };
+
+ uart2: uart@1000b000 {
+ compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+ reg = <0x1000b000 0x1000>;
+ interrupts = <19>;
+ status = "disabled";
+ };
+
+ uart3: uart@1000c000 {
+ compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+ reg = <0x1000c000 0x1000>;
+ interrupts = <18>;
+ status = "disabled";
+ };
+
+ uart4: uart@1000d000 {
+ compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+ reg = <0x1000d000 0x1000>;
+ interrupts = <17>;
+ status = "disabled";
+ };
+
+ cspi1: cspi@1000e000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx27-cspi";
+ reg = <0x1000e000 0x1000>;
+ interrupts = <16>;
+ status = "disabled";
+ };
+
+ cspi2: cspi@1000f000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx27-cspi";
+ reg = <0x1000f000 0x1000>;
+ interrupts = <15>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@10012000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx27-i2c", "fsl,imx1-i2c";
+ reg = <0x10012000 0x1000>;
+ interrupts = <12>;
+ status = "disabled";
+ };
+
+ gpio1: gpio@10015000 {
+ compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+ reg = <0x10015000 0x100>;
+ interrupts = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio2: gpio@10015100 {
+ compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+ reg = <0x10015100 0x100>;
+ interrupts = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio3: gpio@10015200 {
+ compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+ reg = <0x10015200 0x100>;
+ interrupts = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio4: gpio@10015300 {
+ compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+ reg = <0x10015300 0x100>;
+ interrupts = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio5: gpio@10015400 {
+ compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+ reg = <0x10015400 0x100>;
+ interrupts = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio6: gpio@10015500 {
+ compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+ reg = <0x10015500 0x100>;
+ interrupts = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ cspi3: cspi@10017000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx27-cspi";
+ reg = <0x10017000 0x1000>;
+ interrupts = <6>;
+ status = "disabled";
+ };
+
+ uart5: uart@1001b000 {
+ compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+ reg = <0x1001b000 0x1000>;
+ interrupts = <49>;
+ status = "disabled";
+ };
+
+ uart6: uart@1001c000 {
+ compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+ reg = <0x1001c000 0x1000>;
+ interrupts = <48>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@1001d000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx27-i2c", "fsl,imx1-i2c";
+ reg = <0x1001d000 0x1000>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ fec: fec@1002b000 {
+ compatible = "fsl,imx27-fec";
+ reg = <0x1002b000 0x4000>;
+ interrupts = <50>;
+ status = "disabled";
+ };
+ };
+ };
+};
compatible = "fsl,mc13892";
spi-max-frequency = <6000000>;
reg = <0>;
- mc13xxx-irq-gpios = <&gpio1 8 0>;
- fsl,mc13xxx-uses-regulator;
+ interrupt-parent = <&gpio1>;
+ interrupts = <8>;
+
+ regulators {
+ sw1_reg: sw1 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3_reg: sw3 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vpll_reg: vpll {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdig_reg: vdig {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ };
+
+ vsd_reg: vsd {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3150000>;
+ };
+
+ vusb2_reg: vusb2 {
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vvideo_reg: vvideo {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ };
+
+ vaudio_reg: vaudio {
+ regulator-min-microvolt = <2300000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vcam_reg: vcam {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-always-on;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-always-on;
+ };
+ };
};
flash: at45db321d@1 {
usdhc@02198000 { /* uSDHC3 */
cd-gpios = <&gpio6 11 0>;
wp-gpios = <&gpio6 14 0>;
+ vmmc-supply = <®_3p3v>;
status = "okay";
};
usdhc@0219c000 { /* uSDHC4 */
fsl,card-wired;
+ vmmc-supply = <®_3p3v>;
status = "okay";
};
};
};
+ regulators {
+ compatible = "simple-bus";
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+
leds {
compatible = "gpio-leds";
usdhc@02198000 { /* uSDHC3 */
cd-gpios = <&gpio7 0 0>;
wp-gpios = <&gpio7 1 0>;
+ vmmc-supply = <®_3p3v>;
status = "okay";
};
usdhc@0219c000 { /* uSDHC4 */
cd-gpios = <&gpio2 6 0>;
wp-gpios = <&gpio2 7 0>;
+ vmmc-supply = <®_3p3v>;
status = "okay";
};
uart2: uart@021e8000 {
status = "okay";
};
+
+ i2c@021a0000 { /* I2C1 */
+ status = "okay";
+ clock-frequency = <100000>;
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_2p5v: 2p5v {
+ compatible = "regulator-fixed";
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
};
};
model = "TI OMAP3 BeagleBoard";
compatible = "ti,omap3-beagle", "ti,omap3";
- /*
- * Since the initial device tree board file does not create any
- * devices (MMC, network...), the only way to boot is to provide a
- * ramdisk.
- */
- chosen {
- bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug earlyprintk";
- };
-
memory {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
--- /dev/null
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+ model = "TI OMAP3 EVM (OMAP3530, AM/DM37x)";
+ compatible = "ti,omap3-evm", "ti,omap3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+};
ranges;
ti,hwmods = "l3_main";
- intc: interrupt-controller@1 {
- compatible = "ti,omap3-intc";
+ intc: interrupt-controller@48200000 {
+ compatible = "ti,omap2-intc";
interrupt-controller;
#interrupt-cells = <1>;
+ ti,intc-size = <96>;
+ reg = <0x48200000 0x1000>;
};
- uart1: serial@0x4806a000 {
+ uart1: serial@4806a000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart1";
clock-frequency = <48000000>;
};
- uart2: serial@0x4806c000 {
+ uart2: serial@4806c000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart2";
clock-frequency = <48000000>;
};
- uart3: serial@0x49020000 {
+ uart3: serial@49020000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
- uart4: serial@0x49042000 {
+ uart4: serial@49042000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
+
+ i2c1: i2c@48070000 {
+ compatible = "ti,omap3-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c1";
+ };
+
+ i2c2: i2c@48072000 {
+ compatible = "ti,omap3-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c2";
+ };
+
+ i2c3: i2c@48060000 {
+ compatible = "ti,omap3-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c3";
+ };
};
};
model = "TI OMAP4 PandaBoard";
compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
- /*
- * Since the initial device tree board file does not create any
- * devices (MMC, network...), the only way to boot is to provide a
- * ramdisk.
- */
- chosen {
- bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
- };
-
memory {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
model = "TI OMAP4 SDP board";
compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
- /*
- * Since the initial device tree board file does not create any
- * devices (MMC, network...), the only way to boot is to provide a
- * ramdisk.
- */
- chosen {
- bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
- };
-
memory {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
gic: interrupt-controller@48241000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <3>;
reg = <0x48241000 0x1000>,
<0x48240100 0x0100>;
};
- uart1: serial@0x4806a000 {
+ uart1: serial@4806a000 {
compatible = "ti,omap4-uart";
ti,hwmods = "uart1";
clock-frequency = <48000000>;
};
- uart2: serial@0x4806c000 {
+ uart2: serial@4806c000 {
compatible = "ti,omap4-uart";
ti,hwmods = "uart2";
clock-frequency = <48000000>;
};
- uart3: serial@0x48020000 {
+ uart3: serial@48020000 {
compatible = "ti,omap4-uart";
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
- uart4: serial@0x4806e000 {
+ uart4: serial@4806e000 {
compatible = "ti,omap4-uart";
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
+
+ i2c1: i2c@48070000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c1";
+ };
+
+ i2c2: i2c@48072000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c2";
+ };
+
+ i2c3: i2c@48060000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c3";
+ };
+
+ i2c4: i2c@48350000 {
+ compatible = "ti,omap4-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c4";
+ };
};
};
--- /dev/null
+/*
+ * Copyright (C) 2012 Marvell Technology Group Ltd.
+ * Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/include/ "pxa168.dtsi"
+
+/ {
+ model = "Marvell PXA168 Aspenite Development Board";
+ compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
+ };
+
+ memory {
+ reg = <0x00000000 0x04000000>;
+ };
+
+ soc {
+ apb@d4000000 {
+ uart1: uart@d4017000 {
+ status = "okay";
+ };
+ twsi1: i2c@d4011000 {
+ status = "okay";
+ };
+ rtc: rtc@d4010000 {
+ status = "okay";
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2012 Marvell Technology Group Ltd.
+ * Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ i2c0 = &twsi1;
+ i2c1 = &twsi2;
+ };
+
+ intc: intc-interrupt-controller@d4282000 {
+ compatible = "mrvl,mmp-intc", "mrvl,intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xd4282000 0x1000>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ apb@d4000000 { /* APB */
+ compatible = "mrvl,apb-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xd4000000 0x00200000>;
+ ranges;
+
+ uart1: uart@d4017000 {
+ compatible = "mrvl,mmp-uart", "mrvl,pxa-uart";
+ reg = <0xd4017000 0x1000>;
+ interrupts = <27>;
+ status = "disabled";
+ };
+
+ uart2: uart@d4018000 {
+ compatible = "mrvl,mmp-uart", "mrvl,pxa-uart";
+ reg = <0xd4018000 0x1000>;
+ interrupts = <28>;
+ status = "disabled";
+ };
+
+ uart3: uart@d4026000 {
+ compatible = "mrvl,mmp-uart", "mrvl,pxa-uart";
+ reg = <0xd4026000 0x1000>;
+ interrupts = <29>;
+ status = "disabled";
+ };
+
+ gpio: gpio@d4019000 {
+ compatible = "mrvl,mmp-gpio", "mrvl,pxa-gpio";
+ reg = <0xd4019000 0x1000>;
+ interrupts = <49>;
+ interrupt-names = "gpio_mux";
+ gpio-controller;
+ #gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ twsi1: i2c@d4011000 {
+ compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+ reg = <0xd4011000 0x1000>;
+ interrupts = <7>;
+ mrvl,i2c-fast-mode;
+ status = "disabled";
+ };
+
+ twsi2: i2c@d4025000 {
+ compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+ reg = <0xd4025000 0x1000>;
+ interrupts = <58>;
+ status = "disabled";
+ };
+
+ rtc: rtc@d4010000 {
+ compatible = "mrvl,mmp-rtc";
+ reg = <0xd4010000 0x1000>;
+ interrupts = <5 6>;
+ interrupt-names = "rtc 1Hz", "rtc alarm";
+ status = "disabled";
+ };
+ };
+ };
+};
i2c@7000d000 {
clock-frequency = <100000>;
};
+
+ sdhci@78000000 {
+ cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ wp-gpios = <&gpio 155 0>; /* gpio PT3 */
+ power-gpios = <&gpio 31 0>; /* gpio PD7 */
+ };
+
+ sdhci@78000200 {
+ status = "disable";
+ };
+
+ sdhci@78000400 {
+ status = "disable";
+ };
+
+ sdhci@78000400 {
+ support-8bit;
+ };
};
reg = < 0x00000000 0x40000000 >;
};
+ pmc@7000f400 {
+ nvidia,invert-interrupt;
+ };
+
i2c@7000c000 {
clock-frequency = <400000>;
- codec: wm8903@1a {
+ wm8903: wm8903@1a {
compatible = "wlf,wm8903";
reg = <0x1a>;
- interrupts = < 347 >;
+ interrupt-parent = <&gpio>;
+ interrupts = < 187 0x04 >;
gpio-controller;
#gpio-cells = <2>;
- /* 0x8000 = Not configured */
- gpio-cfg = < 0x8000 0x8000 0 0x8000 0x8000 >;
+ micdet-cfg = <0>;
+ micdet-delay = <100>;
+ gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >;
};
};
clock-frequency = <400000>;
};
- sound {
- compatible = "nvidia,harmony-sound", "nvidia,tegra-wm8903";
+ i2s@70002a00 {
+ status = "disable";
+ };
- spkr-en-gpios = <&codec 2 0>;
- hp-det-gpios = <&gpio 178 0>;
- int-mic-en-gpios = <&gpio 184 0>;
- ext-mic-en-gpios = <&gpio 185 0>;
+ sound {
+ compatible = "nvidia,tegra-audio-wm8903-harmony",
+ "nvidia,tegra-audio-wm8903";
+ nvidia,model = "NVIDIA Tegra Harmony";
+
+ nvidia,audio-routing =
+ "Headphone Jack", "HPOUTR",
+ "Headphone Jack", "HPOUTL",
+ "Int Spk", "ROP",
+ "Int Spk", "RON",
+ "Int Spk", "LOP",
+ "Int Spk", "LON",
+ "Mic Jack", "MICBIAS",
+ "IN1L", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&wm8903>;
+
+ nvidia,spkr-en-gpios = <&wm8903 2 0>;
+ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+ nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
+ nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
};
serial@70006000 {
i2c@7000c000 {
clock-frequency = <400000>;
+
+ alc5632: alc5632@1e {
+ compatible = "realtek,alc5632";
+ reg = <0x1e>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
i2c@7000c400 {
clock-frequency = <400000>;
};
+ i2s@70002a00 {
+ status = "disable";
+ };
+
+ sound {
+ compatible = "nvidia,tegra-audio-alc5632-paz00",
+ "nvidia,tegra-audio-alc5632";
+
+ nvidia,model = "Compal PAZ00";
+
+ nvidia,audio-routing =
+ "Int Spk", "SPKOUT",
+ "Int Spk", "SPKOUTN",
+ "Headset Mic", "MICBIAS1",
+ "MIC1", "Headset Mic",
+ "Headset Stereophone", "HPR",
+ "Headset Stereophone", "HPL",
+ "DMICDAT", "Digital Mic";
+
+ nvidia,audio-codec = <&alc5632>;
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+ };
+
serial@70006000 {
clock-frequency = <216000000>;
};
};
serial@70006200 {
- status = "disable";
+ clock-frequency = <216000000>;
};
serial@70006300 {
- clock-frequency = <216000000>;
+ status = "disable";
};
serial@70006400 {
sdhci@c8000000 {
cd-gpios = <&gpio 173 0>; /* gpio PV5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 155 0>; /* gpio PT3 */
+ power-gpios = <&gpio 169 0>; /* gpio PV1 */
};
sdhci@c8000200 {
i2c@7000c000 {
clock-frequency = <400000>;
+
+ wm8903: wm8903@1a {
+ compatible = "wlf,wm8903";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio>;
+ interrupts = < 187 0x04 >;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ micdet-cfg = <0>;
+ micdet-delay = <100>;
+ gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >;
+ };
};
i2c@7000c400 {
};
};
+ i2s@70002a00 {
+ status = "disable";
+ };
+
+ sound {
+ compatible = "nvidia,tegra-audio-wm8903-seaboard",
+ "nvidia,tegra-audio-wm8903";
+ nvidia,model = "NVIDIA Tegra Seaboard";
+
+ nvidia,audio-routing =
+ "Headphone Jack", "HPOUTR",
+ "Headphone Jack", "HPOUTL",
+ "Int Spk", "ROP",
+ "Int Spk", "RON",
+ "Int Spk", "LOP",
+ "Int Spk", "LON",
+ "Mic Jack", "MICBIAS",
+ "IN1R", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&wm8903>;
+
+ nvidia,spkr-en-gpios = <&wm8903 2 0>;
+ nvidia,hp-det-gpios = <&gpio 185 0>; /* gpio PX1 */
+ };
+
serial@70006000 {
status = "disable";
};
gpio-key,wakeup;
};
};
+
+ emc@7000f400 {
+ emc-table@190000 {
+ reg = < 190000 >;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = < 190000 >;
+ nvidia,emc-registers = < 0x0000000c 0x00000026
+ 0x00000009 0x00000003 0x00000004 0x00000004
+ 0x00000002 0x0000000c 0x00000003 0x00000003
+ 0x00000002 0x00000001 0x00000004 0x00000005
+ 0x00000004 0x00000009 0x0000000d 0x0000059f
+ 0x00000000 0x00000003 0x00000003 0x00000003
+ 0x00000003 0x00000001 0x0000000b 0x000000c8
+ 0x00000003 0x00000007 0x00000004 0x0000000f
+ 0x00000002 0x00000000 0x00000000 0x00000002
+ 0x00000000 0x00000000 0x00000083 0xa06204ae
+ 0x007dc010 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000 >;
+ };
+
+ emc-table@380000 {
+ reg = < 380000 >;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = < 380000 >;
+ nvidia,emc-registers = < 0x00000017 0x0000004b
+ 0x00000012 0x00000006 0x00000004 0x00000005
+ 0x00000003 0x0000000c 0x00000006 0x00000006
+ 0x00000003 0x00000001 0x00000004 0x00000005
+ 0x00000004 0x00000009 0x0000000d 0x00000b5f
+ 0x00000000 0x00000003 0x00000003 0x00000006
+ 0x00000006 0x00000001 0x00000011 0x000000c8
+ 0x00000003 0x0000000e 0x00000007 0x0000000f
+ 0x00000002 0x00000000 0x00000000 0x00000002
+ 0x00000000 0x00000000 0x00000083 0xe044048b
+ 0x007d8010 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000 >;
+ };
+ };
};
status = "disable";
};
+ i2s@70002800 {
+ status = "disable";
+ };
+
+ i2s@70002a00 {
+ status = "disable";
+ };
+
+ das@70000c00 {
+ status = "disable";
+ };
+
serial@70006000 {
clock-frequency = < 216000000 >;
};
i2c@7000c000 {
clock-frequency = <400000>;
+
+ wm8903: wm8903@1a {
+ compatible = "wlf,wm8903";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio>;
+ interrupts = < 187 0x04 >;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ micdet-cfg = <0>;
+ micdet-delay = <100>;
+ gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >;
+ };
};
i2c@7000c400 {
clock-frequency = <400000>;
};
+ i2s@70002a00 {
+ status = "disable";
+ };
+
+ sound {
+ compatible = "nvidia,tegra-audio-wm8903-ventana",
+ "nvidia,tegra-audio-wm8903";
+ nvidia,model = "NVIDIA Tegra Ventana";
+
+ nvidia,audio-routing =
+ "Headphone Jack", "HPOUTR",
+ "Headphone Jack", "HPOUTL",
+ "Int Spk", "ROP",
+ "Int Spk", "RON",
+ "Int Spk", "LOP",
+ "Int Spk", "LON",
+ "Mic Jack", "MICBIAS",
+ "IN1L", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&wm8903>;
+
+ nvidia,spkr-en-gpios = <&wm8903 2 0>;
+ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+ nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
+ nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
+ };
+
serial@70006000 {
status = "disable";
};
compatible = "nvidia,tegra20";
interrupt-parent = <&intc>;
+ pmc@7000f400 {
+ compatible = "nvidia,tegra20-pmc";
+ reg = <0x7000e400 0x400>;
+ };
+
intc: interrupt-controller@50041000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
< 0x50040100 0x0100 >;
};
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <0 56 0x04
+ 0 57 0x04>;
+ };
+
+ apbdma: dma@6000a000 {
+ compatible = "nvidia,tegra20-apbdma";
+ reg = <0x6000a000 0x1200>;
+ interrupts = < 0 104 0x04
+ 0 105 0x04
+ 0 106 0x04
+ 0 107 0x04
+ 0 108 0x04
+ 0 109 0x04
+ 0 110 0x04
+ 0 111 0x04
+ 0 112 0x04
+ 0 113 0x04
+ 0 114 0x04
+ 0 115 0x04
+ 0 116 0x04
+ 0 117 0x04
+ 0 118 0x04
+ 0 119 0x04 >;
+ };
+
i2c@7000c000 {
#address-cells = <1>;
#size-cells = <0>;
interrupts = < 0 53 0x04 >;
};
- i2s@70002800 {
+ tegra_i2s1: i2s@70002800 {
compatible = "nvidia,tegra20-i2s";
reg = <0x70002800 0x200>;
interrupts = < 0 13 0x04 >;
- dma-channel = < 2 >;
+ nvidia,dma-request-selector = < &apbdma 2 >;
};
- i2s@70002a00 {
+ tegra_i2s2: i2s@70002a00 {
compatible = "nvidia,tegra20-i2s";
reg = <0x70002a00 0x200>;
interrupts = < 0 3 0x04 >;
- dma-channel = < 1 >;
+ nvidia,dma-request-selector = < &apbdma 1 >;
};
das@70000c00 {
interrupts = < 0 91 0x04 >;
};
+ emc@7000f400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nvidia,tegra20-emc";
+ reg = <0x7000f400 0x200>;
+ };
+
sdhci@c8000000 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000000 0x200>;
compatible = "nvidia,tegra30";
interrupt-parent = <&intc>;
+ pmc@7000f400 {
+ compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc";
+ reg = <0x7000e400 0x400>;
+ };
+
intc: interrupt-controller@50041000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
< 0x50040100 0x0100 >;
};
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <0 144 0x04
+ 0 145 0x04
+ 0 146 0x04
+ 0 147 0x04>;
+ };
+
+ apbdma: dma@6000a000 {
+ compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
+ reg = <0x6000a000 0x1400>;
+ interrupts = < 0 104 0x04
+ 0 105 0x04
+ 0 106 0x04
+ 0 107 0x04
+ 0 108 0x04
+ 0 109 0x04
+ 0 110 0x04
+ 0 111 0x04
+ 0 112 0x04
+ 0 113 0x04
+ 0 114 0x04
+ 0 115 0x04
+ 0 116 0x04
+ 0 117 0x04
+ 0 118 0x04
+ 0 119 0x04
+ 0 128 0x04
+ 0 129 0x04
+ 0 130 0x04
+ 0 131 0x04
+ 0 132 0x04
+ 0 133 0x04
+ 0 134 0x04
+ 0 135 0x04
+ 0 136 0x04
+ 0 137 0x04
+ 0 138 0x04
+ 0 139 0x04
+ 0 140 0x04
+ 0 141 0x04
+ 0 142 0x04
+ 0 143 0x04 >;
+ };
+
i2c@7000c000 {
#address-cells = <1>;
#size-cells = <0>;
gpio: gpio@6000d000 {
compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio";
reg = < 0x6000d000 0x1000 >;
- interrupts = < 0 32 0x04 0 33 0x04 0 34 0x04 0 35 0x04 0 55 0x04 0 87 0x04 0 89 0x04 >;
+ interrupts = < 0 32 0x04
+ 0 33 0x04
+ 0 34 0x04
+ 0 35 0x04
+ 0 55 0x04
+ 0 87 0x04
+ 0 89 0x04
+ 0 125 0x04 >;
#gpio-cells = <2>;
gpio-controller;
};
--- /dev/null
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * Motherboard Express uATX
+ * V2M-P1
+ *
+ * HBI-0190D
+ *
+ * RS1 memory map ("ARM Cortex-A Series memory map" in the board's
+ * Technical Reference Manual)
+ *
+ * WARNING! The hardware described in this file is independent from the
+ * original variant (vexpress-v2m.dtsi), but there is a strong
+ * correspondence between the two configurations.
+ *
+ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
+ * CHANGES TO vexpress-v2m.dtsi!
+ */
+
+/ {
+ aliases {
+ arm,v2m_timer = &v2m_timer01;
+ };
+
+ motherboard {
+ compatible = "simple-bus";
+ arm,v2m-memory-map = "rs1";
+ #address-cells = <2>; /* SMB chipselect number and offset */
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+
+ flash@0,00000000 {
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ reg = <0 0x00000000 0x04000000>,
+ <4 0x00000000 0x04000000>;
+ bank-width = <4>;
+ };
+
+ psram@1,00000000 {
+ compatible = "arm,vexpress-psram", "mtd-ram";
+ reg = <1 0x00000000 0x02000000>;
+ bank-width = <4>;
+ };
+
+ vram@2,00000000 {
+ compatible = "arm,vexpress-vram";
+ reg = <2 0x00000000 0x00800000>;
+ };
+
+ ethernet@2,02000000 {
+ compatible = "smsc,lan9118", "smsc,lan9115";
+ reg = <2 0x02000000 0x10000>;
+ interrupts = <15>;
+ phy-mode = "mii";
+ reg-io-width = <4>;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
+ };
+
+ usb@2,03000000 {
+ compatible = "nxp,usb-isp1761";
+ reg = <2 0x03000000 0x20000>;
+ interrupts = <16>;
+ port1-otg;
+ };
+
+ iofpga@3,00000000 {
+ compatible = "arm,amba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 3 0 0x200000>;
+
+ sysreg@010000 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x010000 0x1000>;
+ };
+
+ sysctl@020000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x020000 0x1000>;
+ };
+
+ /* PCI-E I2C bus */
+ v2m_i2c_pcie: i2c@030000 {
+ compatible = "arm,versatile-i2c";
+ reg = <0x030000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pcie-switch@60 {
+ compatible = "idt,89hpes32h8";
+ reg = <0x60>;
+ };
+ };
+
+ aaci@040000 {
+ compatible = "arm,pl041", "arm,primecell";
+ reg = <0x040000 0x1000>;
+ interrupts = <11>;
+ };
+
+ mmci@050000 {
+ compatible = "arm,pl180", "arm,primecell";
+ reg = <0x050000 0x1000>;
+ interrupts = <9 10>;
+ };
+
+ kmi@060000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x060000 0x1000>;
+ interrupts = <12>;
+ };
+
+ kmi@070000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x070000 0x1000>;
+ interrupts = <13>;
+ };
+
+ v2m_serial0: uart@090000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x090000 0x1000>;
+ interrupts = <5>;
+ };
+
+ v2m_serial1: uart@0a0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0a0000 0x1000>;
+ interrupts = <6>;
+ };
+
+ v2m_serial2: uart@0b0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0b0000 0x1000>;
+ interrupts = <7>;
+ };
+
+ v2m_serial3: uart@0c0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0c0000 0x1000>;
+ interrupts = <8>;
+ };
+
+ wdt@0f0000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0f0000 0x1000>;
+ interrupts = <0>;
+ };
+
+ v2m_timer01: timer@110000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x110000 0x1000>;
+ interrupts = <2>;
+ };
+
+ v2m_timer23: timer@120000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x120000 0x1000>;
+ };
+
+ /* DVI I2C bus */
+ v2m_i2c_dvi: i2c@160000 {
+ compatible = "arm,versatile-i2c";
+ reg = <0x160000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dvi-transmitter@39 {
+ compatible = "sil,sii9022-tpi", "sil,sii9022";
+ reg = <0x39>;
+ };
+
+ dvi-transmitter@60 {
+ compatible = "sil,sii9022-cpi", "sil,sii9022";
+ reg = <0x60>;
+ };
+ };
+
+ rtc@170000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x170000 0x1000>;
+ interrupts = <4>;
+ };
+
+ compact-flash@1a0000 {
+ compatible = "arm,vexpress-cf", "ata-generic";
+ reg = <0x1a0000 0x100
+ 0x1a0100 0xf00>;
+ reg-shift = <2>;
+ };
+
+ clcd@1f0000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x1f0000 0x1000>;
+ interrupts = <14>;
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * Motherboard Express uATX
+ * V2M-P1
+ *
+ * HBI-0190D
+ *
+ * Original memory map ("Legacy memory map" in the board's
+ * Technical Reference Manual)
+ *
+ * WARNING! The hardware described in this file is independent from the
+ * RS1 variant (vexpress-v2m-rs1.dtsi), but there is a strong
+ * correspondence between the two configurations.
+ *
+ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
+ * CHANGES TO vexpress-v2m-rs1.dtsi!
+ */
+
+/ {
+ aliases {
+ arm,v2m_timer = &v2m_timer01;
+ };
+
+ motherboard {
+ compatible = "simple-bus";
+ #address-cells = <2>; /* SMB chipselect number and offset */
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+
+ flash@0,00000000 {
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ reg = <0 0x00000000 0x04000000>,
+ <1 0x00000000 0x04000000>;
+ bank-width = <4>;
+ };
+
+ psram@2,00000000 {
+ compatible = "arm,vexpress-psram", "mtd-ram";
+ reg = <2 0x00000000 0x02000000>;
+ bank-width = <4>;
+ };
+
+ vram@3,00000000 {
+ compatible = "arm,vexpress-vram";
+ reg = <3 0x00000000 0x00800000>;
+ };
+
+ ethernet@3,02000000 {
+ compatible = "smsc,lan9118", "smsc,lan9115";
+ reg = <3 0x02000000 0x10000>;
+ interrupts = <15>;
+ phy-mode = "mii";
+ reg-io-width = <4>;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
+ };
+
+ usb@3,03000000 {
+ compatible = "nxp,usb-isp1761";
+ reg = <3 0x03000000 0x20000>;
+ interrupts = <16>;
+ port1-otg;
+ };
+
+ iofpga@7,00000000 {
+ compatible = "arm,amba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 7 0 0x20000>;
+
+ sysreg@00000 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x00000 0x1000>;
+ };
+
+ sysctl@01000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x01000 0x1000>;
+ };
+
+ /* PCI-E I2C bus */
+ v2m_i2c_pcie: i2c@02000 {
+ compatible = "arm,versatile-i2c";
+ reg = <0x02000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pcie-switch@60 {
+ compatible = "idt,89hpes32h8";
+ reg = <0x60>;
+ };
+ };
+
+ aaci@04000 {
+ compatible = "arm,pl041", "arm,primecell";
+ reg = <0x04000 0x1000>;
+ interrupts = <11>;
+ };
+
+ mmci@05000 {
+ compatible = "arm,pl180", "arm,primecell";
+ reg = <0x05000 0x1000>;
+ interrupts = <9 10>;
+ };
+
+ kmi@06000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x06000 0x1000>;
+ interrupts = <12>;
+ };
+
+ kmi@07000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x07000 0x1000>;
+ interrupts = <13>;
+ };
+
+ v2m_serial0: uart@09000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x09000 0x1000>;
+ interrupts = <5>;
+ };
+
+ v2m_serial1: uart@0a000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0a000 0x1000>;
+ interrupts = <6>;
+ };
+
+ v2m_serial2: uart@0b000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0b000 0x1000>;
+ interrupts = <7>;
+ };
+
+ v2m_serial3: uart@0c000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0c000 0x1000>;
+ interrupts = <8>;
+ };
+
+ wdt@0f000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0f000 0x1000>;
+ interrupts = <0>;
+ };
+
+ v2m_timer01: timer@11000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x11000 0x1000>;
+ interrupts = <2>;
+ };
+
+ v2m_timer23: timer@12000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x12000 0x1000>;
+ };
+
+ /* DVI I2C bus */
+ v2m_i2c_dvi: i2c@16000 {
+ compatible = "arm,versatile-i2c";
+ reg = <0x16000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dvi-transmitter@39 {
+ compatible = "sil,sii9022-tpi", "sil,sii9022";
+ reg = <0x39>;
+ };
+
+ dvi-transmitter@60 {
+ compatible = "sil,sii9022-cpi", "sil,sii9022";
+ reg = <0x60>;
+ };
+ };
+
+ rtc@17000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x17000 0x1000>;
+ interrupts = <4>;
+ };
+
+ compact-flash@1a000 {
+ compatible = "arm,vexpress-cf", "ata-generic";
+ reg = <0x1a000 0x100
+ 0x1a100 0xf00>;
+ reg-shift = <2>;
+ };
+
+ clcd@1f000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x1f000 0x1000>;
+ interrupts = <14>;
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A15x2 (version with Test Chip 1)
+ * Cortex-A15 MPCore (V2P-CA15)
+ *
+ * HBI-0237A
+ */
+
+/dts-v1/;
+
+/ {
+ model = "V2P-CA15";
+ arm,hbi = <0x237>;
+ compatible = "arm,vexpress,v2p-ca15,tc1", "arm,vexpress,v2p-ca15", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen { };
+
+ aliases {
+ serial0 = &v2m_serial0;
+ serial1 = &v2m_serial1;
+ serial2 = &v2m_serial2;
+ serial3 = &v2m_serial3;
+ i2c0 = &v2m_i2c_dvi;
+ i2c1 = &v2m_i2c_pcie;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <1>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ hdlcd@2b000000 {
+ compatible = "arm,hdlcd";
+ reg = <0x2b000000 0x1000>;
+ interrupts = <0 85 4>;
+ };
+
+ memory-controller@2b0a0000 {
+ compatible = "arm,pl341", "arm,primecell";
+ reg = <0x2b0a0000 0x1000>;
+ };
+
+ wdt@2b060000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x2b060000 0x1000>;
+ interrupts = <98>;
+ };
+
+ gic: interrupt-controller@2c001000 {
+ compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x2c001000 0x1000>,
+ <0x2c002000 0x100>;
+ };
+
+ memory-controller@7ffd0000 {
+ compatible = "arm,pl354", "arm,primecell";
+ reg = <0x7ffd0000 0x1000>;
+ interrupts = <0 86 4>,
+ <0 87 4>;
+ };
+
+ dma@7ffb0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x7ffb0000 0x1000>;
+ interrupts = <0 92 4>,
+ <0 88 4>,
+ <0 89 4>,
+ <0 90 4>,
+ <0 91 4>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
+ interrupts = <0 68 4>,
+ <0 69 4>;
+ };
+
+ motherboard {
+ ranges = <0 0 0x08000000 0x04000000>,
+ <1 0 0x14000000 0x04000000>,
+ <2 0 0x18000000 0x04000000>,
+ <3 0 0x1c000000 0x04000000>,
+ <4 0 0x0c000000 0x04000000>,
+ <5 0 0x10000000 0x04000000>;
+
+ interrupt-map-mask = <0 0 63>;
+ interrupt-map = <0 0 0 &gic 0 0 4>,
+ <0 0 1 &gic 0 1 4>,
+ <0 0 2 &gic 0 2 4>,
+ <0 0 3 &gic 0 3 4>,
+ <0 0 4 &gic 0 4 4>,
+ <0 0 5 &gic 0 5 4>,
+ <0 0 6 &gic 0 6 4>,
+ <0 0 7 &gic 0 7 4>,
+ <0 0 8 &gic 0 8 4>,
+ <0 0 9 &gic 0 9 4>,
+ <0 0 10 &gic 0 10 4>,
+ <0 0 11 &gic 0 11 4>,
+ <0 0 12 &gic 0 12 4>,
+ <0 0 13 &gic 0 13 4>,
+ <0 0 14 &gic 0 14 4>,
+ <0 0 15 &gic 0 15 4>,
+ <0 0 16 &gic 0 16 4>,
+ <0 0 17 &gic 0 17 4>,
+ <0 0 18 &gic 0 18 4>,
+ <0 0 19 &gic 0 19 4>,
+ <0 0 20 &gic 0 20 4>,
+ <0 0 21 &gic 0 21 4>,
+ <0 0 22 &gic 0 22 4>,
+ <0 0 23 &gic 0 23 4>,
+ <0 0 24 &gic 0 24 4>,
+ <0 0 25 &gic 0 25 4>,
+ <0 0 26 &gic 0 26 4>,
+ <0 0 27 &gic 0 27 4>,
+ <0 0 28 &gic 0 28 4>,
+ <0 0 29 &gic 0 29 4>,
+ <0 0 30 &gic 0 30 4>,
+ <0 0 31 &gic 0 31 4>,
+ <0 0 32 &gic 0 32 4>,
+ <0 0 33 &gic 0 33 4>,
+ <0 0 34 &gic 0 34 4>,
+ <0 0 35 &gic 0 35 4>,
+ <0 0 36 &gic 0 36 4>,
+ <0 0 37 &gic 0 37 4>,
+ <0 0 38 &gic 0 38 4>,
+ <0 0 39 &gic 0 39 4>,
+ <0 0 40 &gic 0 40 4>,
+ <0 0 41 &gic 0 41 4>,
+ <0 0 42 &gic 0 42 4>;
+ };
+};
+
+/include/ "vexpress-v2m-rs1.dtsi"
--- /dev/null
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A5x2
+ * Cortex-A5 MPCore (V2P-CA5s)
+ *
+ * HBI-0225B
+ */
+
+/dts-v1/;
+
+/ {
+ model = "V2P-CA5s";
+ arm,hbi = <0x225>;
+ compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen { };
+
+ aliases {
+ serial0 = &v2m_serial0;
+ serial1 = &v2m_serial1;
+ serial2 = &v2m_serial2;
+ serial3 = &v2m_serial3;
+ i2c0 = &v2m_i2c_dvi;
+ i2c1 = &v2m_i2c_pcie;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ hdlcd@2a110000 {
+ compatible = "arm,hdlcd";
+ reg = <0x2a110000 0x1000>;
+ interrupts = <0 85 4>;
+ };
+
+ memory-controller@2a150000 {
+ compatible = "arm,pl341", "arm,primecell";
+ reg = <0x2a150000 0x1000>;
+ };
+
+ memory-controller@2a190000 {
+ compatible = "arm,pl354", "arm,primecell";
+ reg = <0x2a190000 0x1000>;
+ interrupts = <0 86 4>,
+ <0 87 4>;
+ };
+
+ scu@2c000000 {
+ compatible = "arm,cortex-a5-scu";
+ reg = <0x2c000000 0x58>;
+ };
+
+ timer@2c000600 {
+ compatible = "arm,cortex-a5-twd-timer";
+ reg = <0x2c000600 0x38>;
+ interrupts = <1 2 0x304>,
+ <1 3 0x304>;
+ };
+
+ gic: interrupt-controller@2c001000 {
+ compatible = "arm,corex-a5-gic", "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x2c001000 0x1000>,
+ <0x2c000100 0x100>;
+ };
+
+ L2: cache-controller@2c0f0000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x2c0f0000 0x1000>;
+ interrupts = <0 84 4>;
+ cache-level = <2>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a5-pmu", "arm,cortex-a9-pmu";
+ interrupts = <0 68 4>,
+ <0 69 4>;
+ };
+
+ motherboard {
+ ranges = <0 0 0x08000000 0x04000000>,
+ <1 0 0x14000000 0x04000000>,
+ <2 0 0x18000000 0x04000000>,
+ <3 0 0x1c000000 0x04000000>,
+ <4 0 0x0c000000 0x04000000>,
+ <5 0 0x10000000 0x04000000>;
+
+ interrupt-map-mask = <0 0 63>;
+ interrupt-map = <0 0 0 &gic 0 0 4>,
+ <0 0 1 &gic 0 1 4>,
+ <0 0 2 &gic 0 2 4>,
+ <0 0 3 &gic 0 3 4>,
+ <0 0 4 &gic 0 4 4>,
+ <0 0 5 &gic 0 5 4>,
+ <0 0 6 &gic 0 6 4>,
+ <0 0 7 &gic 0 7 4>,
+ <0 0 8 &gic 0 8 4>,
+ <0 0 9 &gic 0 9 4>,
+ <0 0 10 &gic 0 10 4>,
+ <0 0 11 &gic 0 11 4>,
+ <0 0 12 &gic 0 12 4>,
+ <0 0 13 &gic 0 13 4>,
+ <0 0 14 &gic 0 14 4>,
+ <0 0 15 &gic 0 15 4>,
+ <0 0 16 &gic 0 16 4>,
+ <0 0 17 &gic 0 17 4>,
+ <0 0 18 &gic 0 18 4>,
+ <0 0 19 &gic 0 19 4>,
+ <0 0 20 &gic 0 20 4>,
+ <0 0 21 &gic 0 21 4>,
+ <0 0 22 &gic 0 22 4>,
+ <0 0 23 &gic 0 23 4>,
+ <0 0 24 &gic 0 24 4>,
+ <0 0 25 &gic 0 25 4>,
+ <0 0 26 &gic 0 26 4>,
+ <0 0 27 &gic 0 27 4>,
+ <0 0 28 &gic 0 28 4>,
+ <0 0 29 &gic 0 29 4>,
+ <0 0 30 &gic 0 30 4>,
+ <0 0 31 &gic 0 31 4>,
+ <0 0 32 &gic 0 32 4>,
+ <0 0 33 &gic 0 33 4>,
+ <0 0 34 &gic 0 34 4>,
+ <0 0 35 &gic 0 35 4>,
+ <0 0 36 &gic 0 36 4>,
+ <0 0 37 &gic 0 37 4>,
+ <0 0 38 &gic 0 38 4>,
+ <0 0 39 &gic 0 39 4>,
+ <0 0 40 &gic 0 40 4>,
+ <0 0 41 &gic 0 41 4>,
+ <0 0 42 &gic 0 42 4>;
+ };
+};
+
+/include/ "vexpress-v2m-rs1.dtsi"
--- /dev/null
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A9x4
+ * Cortex-A9 MPCore (V2P-CA9)
+ *
+ * HBI-0191B
+ */
+
+/dts-v1/;
+
+/ {
+ model = "V2P-CA9";
+ arm,hbi = <0x191>;
+ compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen { };
+
+ aliases {
+ serial0 = &v2m_serial0;
+ serial1 = &v2m_serial1;
+ serial2 = &v2m_serial2;
+ serial3 = &v2m_serial3;
+ i2c0 = &v2m_i2c_dvi;
+ i2c1 = &v2m_i2c_pcie;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <2>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <3>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x40000000>;
+ };
+
+ clcd@10020000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x10020000 0x1000>;
+ interrupts = <0 44 4>;
+ };
+
+ memory-controller@100e0000 {
+ compatible = "arm,pl341", "arm,primecell";
+ reg = <0x100e0000 0x1000>;
+ };
+
+ memory-controller@100e1000 {
+ compatible = "arm,pl354", "arm,primecell";
+ reg = <0x100e1000 0x1000>;
+ interrupts = <0 45 4>,
+ <0 46 4>;
+ };
+
+ timer@100e4000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x100e4000 0x1000>;
+ interrupts = <0 48 4>,
+ <0 49 4>;
+ };
+
+ watchdog@100e5000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x100e5000 0x1000>;
+ interrupts = <0 51 4>;
+ };
+
+ scu@1e000000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0x1e000000 0x58>;
+ };
+
+ timer@1e000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x1e000600 0x20>;
+ interrupts = <1 2 0xf04>,
+ <1 3 0xf04>;
+ };
+
+ gic: interrupt-controller@1e001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1e001000 0x1000>,
+ <0x1e000100 0x100>;
+ };
+
+ L2: cache-controller@1e00a000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x1e00a000 0x1000>;
+ interrupts = <0 43 4>;
+ cache-level = <2>;
+ arm,data-latency = <1 1 1>;
+ arm,tag-latency = <1 1 1>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <0 60 4>,
+ <0 61 4>,
+ <0 62 4>,
+ <0 63 4>;
+ };
+
+ motherboard {
+ ranges = <0 0 0x40000000 0x04000000>,
+ <1 0 0x44000000 0x04000000>,
+ <2 0 0x48000000 0x04000000>,
+ <3 0 0x4c000000 0x04000000>,
+ <7 0 0x10000000 0x00020000>;
+
+ interrupt-map-mask = <0 0 63>;
+ interrupt-map = <0 0 0 &gic 0 0 4>,
+ <0 0 1 &gic 0 1 4>,
+ <0 0 2 &gic 0 2 4>,
+ <0 0 3 &gic 0 3 4>,
+ <0 0 4 &gic 0 4 4>,
+ <0 0 5 &gic 0 5 4>,
+ <0 0 6 &gic 0 6 4>,
+ <0 0 7 &gic 0 7 4>,
+ <0 0 8 &gic 0 8 4>,
+ <0 0 9 &gic 0 9 4>,
+ <0 0 10 &gic 0 10 4>,
+ <0 0 11 &gic 0 11 4>,
+ <0 0 12 &gic 0 12 4>,
+ <0 0 13 &gic 0 13 4>,
+ <0 0 14 &gic 0 14 4>,
+ <0 0 15 &gic 0 15 4>,
+ <0 0 16 &gic 0 16 4>,
+ <0 0 17 &gic 0 17 4>,
+ <0 0 18 &gic 0 18 4>,
+ <0 0 19 &gic 0 19 4>,
+ <0 0 20 &gic 0 20 4>,
+ <0 0 21 &gic 0 21 4>,
+ <0 0 22 &gic 0 22 4>,
+ <0 0 23 &gic 0 23 4>,
+ <0 0 24 &gic 0 24 4>,
+ <0 0 25 &gic 0 25 4>,
+ <0 0 26 &gic 0 26 4>,
+ <0 0 27 &gic 0 27 4>,
+ <0 0 28 &gic 0 28 4>,
+ <0 0 29 &gic 0 29 4>,
+ <0 0 30 &gic 0 30 4>,
+ <0 0 31 &gic 0 31 4>,
+ <0 0 32 &gic 0 32 4>,
+ <0 0 33 &gic 0 33 4>,
+ <0 0 34 &gic 0 34 4>,
+ <0 0 35 &gic 0 35 4>,
+ <0 0 36 &gic 0 36 4>,
+ <0 0 37 &gic 0 37 4>,
+ <0 0 38 &gic 0 38 4>,
+ <0 0 39 &gic 0 39 4>,
+ <0 0 40 &gic 0 40 4>,
+ <0 0 41 &gic 0 41 4>,
+ <0 0 42 &gic 0 42 4>;
+ };
+};
+
+/include/ "vexpress-v2m.dtsi"
return -EBUSY;
}
-/*
- * If we set up a device for bus mastering, we need to check the latency
- * timer as we don't have even crappy BIOSes to set it properly.
- * The implementation is from arch/i386/pci/i386.c
- */
-unsigned int pcibios_max_latency = 255;
-
/* ITE bridge requires setting latency timer to avoid early bus access
termination by PCI bus master devices
*/
struct pl330_thread *thrd = ch_id;
struct pl330_dmac *pl330;
unsigned long flags;
- int ret = 0, active = thrd->req_running;
+ int ret = 0, active;
if (!thrd || thrd->free || thrd->dmac->state == DYING)
return -EINVAL;
pl330 = thrd->dmac;
+ active = thrd->req_running;
spin_lock_irqsave(&pl330->lock, flags);
disable_irq
.endm
+ .macro save_and_disable_irqs_notrace, oldcpsr
+ mrs \oldcpsr, cpsr
+ disable_irq_notrace
+ .endm
+
/*
* Restore interrupt state previously stored in a register. We don't
* guarantee that this will preserve the flags.
*
* Integrator AP has 16-bit timers, Integrator CP, Versatile and Realview
* can have 16-bit or 32-bit selectable via a bit in the control register.
+ *
+ * Every SP804 contains two identical timers.
*/
+#define TIMER_1_BASE 0x00
+#define TIMER_2_BASE 0x20
+
#define TIMER_LOAD 0x00 /* ACVR rw */
#define TIMER_VALUE 0x04 /* ACVR ro */
#define TIMER_CTRL 0x08 /* ACVR rw */
DCCTRL1, /* Bufferable only */
DCCTRL2, /* Cacheable, but do not allocate */
DCCTRL3, /* Cacheable and bufferable, but do not allocate */
- DINVALID1 = 8,
+ DINVALID1, /* AWCACHE = 0x1000 */
DINVALID2,
DCCTRL6, /* Cacheable write-through, allocate on writes only */
DCCTRL7, /* Cacheable write-back, allocate on writes only */
#include <asm/hw_breakpoint.h>
#include <asm/ptrace.h>
#include <asm/types.h>
+#include <asm/system.h>
#ifdef __KERNEL__
#define STACK_TOP ((current->personality & ADDR_LIMIT_32BIT) ? \
#include <linux/perf_event.h>
#include <linux/hw_breakpoint.h>
#include <linux/regset.h>
+#include <linux/audit.h>
#include <asm/pgtable.h>
#include <asm/system.h>
return ret;
}
+#ifdef __ARMEB__
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB
+#else
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARM
+#endif
+
asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
{
unsigned long ip;
if (!ip)
audit_syscall_exit(regs);
else
- audit_syscall_entry(AUDIT_ARCH_ARMEB, scno, regs->ARM_r0,
+ audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0,
regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
if (!test_thread_flag(TIF_SYSCALL_TRACE))
static int twd_cpufreq_init(void)
{
- if (!IS_ERR(twd_clk))
+ if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk))
return cpufreq_register_notifier(&twd_cpufreq_nb,
CPUFREQ_TRANSITION_NOTIFIER);
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
* CF/IDE
* -------------------------------------------------------------------- */
-#if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) || \
- defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
+#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
static struct at91_cf_data cf0_data;
if (data->flags & AT91_CF_TRUE_IDE)
#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE)
pdev->name = "pata_at91";
-#elif defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
- pdev->name = "at91_ide";
#else
-#warning "board requires AT91_CF_TRUE_IDE: enable either at91_ide or pata_at91"
+#warning "board requires AT91_CF_TRUE_IDE: enable pata_at91"
#endif
else
pdev->name = "at91_cf";
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
* Compact Flash (PCMCIA or IDE)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \
- defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
+ defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
static struct at91_cf_data cf0_data;
at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */
at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
- pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf";
+ pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "pata_at91" : "at91_cf";
platform_device_register(pdev);
}
#else
#include <mach/cpu.h>
+#ifndef __ASSEMBLY__
+struct sam9_smc_config {
+ /* Setup register */
+ u8 ncs_read_setup;
+ u8 nrd_setup;
+ u8 ncs_write_setup;
+ u8 nwe_setup;
+
+ /* Pulse register */
+ u8 ncs_read_pulse;
+ u8 nrd_pulse;
+ u8 ncs_write_pulse;
+ u8 nwe_pulse;
+
+ /* Cycle register */
+ u16 read_cycle;
+ u16 write_cycle;
+
+ /* Mode register */
+ u32 mode;
+ u8 tdf_cycles:4;
+};
+
+extern void sam9_smc_configure(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_read(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_read_mode(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_write_mode(int id, int cs, struct sam9_smc_config *config);
+#endif
+
#define AT91_SMC_SETUP 0x00 /* Setup Register for CS n */
#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
#define AT91_SMC_NWESETUP_(x) ((x) << 0)
* linux/arch/arm/mach-at91/sam9_smc.c
*
* Copyright (C) 2008 Andrew Victor
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
static void __iomem *smc_base_addr[2];
-static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_config* config)
+static void sam9_smc_cs_write_mode(void __iomem *base,
+ struct sam9_smc_config *config)
+{
+ __raw_writel(config->mode
+ | AT91_SMC_TDF_(config->tdf_cycles),
+ base + AT91_SMC_MODE);
+}
+
+void sam9_smc_write_mode(int id, int cs,
+ struct sam9_smc_config *config)
+{
+ sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config);
+}
+
+static void sam9_smc_cs_configure(void __iomem *base,
+ struct sam9_smc_config *config)
{
/* Setup register */
base + AT91_SMC_CYCLE);
/* Mode register */
- __raw_writel(config->mode
- | AT91_SMC_TDF_(config->tdf_cycles),
- base + AT91_SMC_MODE);
+ sam9_smc_cs_write_mode(base, config);
}
-void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config)
+void sam9_smc_configure(int id, int cs,
+ struct sam9_smc_config *config)
{
sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config);
}
+static void sam9_smc_cs_read_mode(void __iomem *base,
+ struct sam9_smc_config *config)
+{
+ u32 val = __raw_readl(base + AT91_SMC_MODE);
+
+ config->mode = (val & ~AT91_SMC_NWECYCLE);
+ config->tdf_cycles = (val & AT91_SMC_NWECYCLE) >> 16 ;
+}
+
+void sam9_smc_read_mode(int id, int cs,
+ struct sam9_smc_config *config)
+{
+ sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config);
+}
+
+static void sam9_smc_cs_read(void __iomem *base,
+ struct sam9_smc_config *config)
+{
+ u32 val;
+
+ /* Setup register */
+ val = __raw_readl(base + AT91_SMC_SETUP);
+
+ config->nwe_setup = val & AT91_SMC_NWESETUP;
+ config->ncs_write_setup = (val & AT91_SMC_NCS_WRSETUP) >> 8;
+ config->nrd_setup = (val & AT91_SMC_NRDSETUP) >> 16;
+ config->ncs_read_setup = (val & AT91_SMC_NCS_RDSETUP) >> 24;
+
+ /* Pulse register */
+ val = __raw_readl(base + AT91_SMC_PULSE);
+
+ config->nwe_setup = val & AT91_SMC_NWEPULSE;
+ config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8;
+ config->nrd_pulse = (val & AT91_SMC_NRDPULSE) >> 16;
+ config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24;
+
+ /* Cycle register */
+ val = __raw_readl(base + AT91_SMC_CYCLE);
+
+ config->write_cycle = val & AT91_SMC_NWECYCLE;
+ config->read_cycle = (val & AT91_SMC_NRDCYCLE) >> 16;
+
+ /* Mode register */
+ sam9_smc_cs_read_mode(base, config);
+}
+
+void sam9_smc_read(int id, int cs, struct sam9_smc_config *config)
+{
+ sam9_smc_cs_read(AT91_SMC_CS(id, cs), config);
+}
+
void __init at91sam9_ioremap_smc(int id, u32 addr)
{
if (id > 1) {
* published by the Free Software Foundation.
*/
-struct sam9_smc_config {
- /* Setup register */
- u8 ncs_read_setup;
- u8 nrd_setup;
- u8 ncs_write_setup;
- u8 nwe_setup;
-
- /* Pulse register */
- u8 ncs_read_pulse;
- u8 nrd_pulse;
- u8 ncs_write_pulse;
- u8 nwe_pulse;
-
- /* Cycle register */
- u16 read_cycle;
- u16 write_cycle;
-
- /* Mode register */
- u32 mode;
- u8 tdf_cycles:4;
-};
-
-extern void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config);
extern void __init at91sam9_ioremap_smc(int id, u32 addr);
#include <asm/mach/arch.h>
#include <linux/irq.h>
#include <plat/time.h>
+#include <plat/ehci-orion.h>
#include <plat/common.h>
#include <plat/addr-map.h>
#include "common.h"
****************************************************************************/
void __init dove_ehci0_init(void)
{
- orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0);
+ orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0, EHCI_PHY_NA);
}
/*****************************************************************************
#include <mach/hardware.h>
#include <mach/fb.h>
#include <mach/ep93xx_spi.h>
+#include <mach/gpio-ep93xx.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
}, {
I2C_BOARD_INFO("pca9539", 0x74),
.platform_data = &pca953x_74_gpio_data,
- .irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)),
}, {
I2C_BOARD_INFO("pca9539", 0x75),
.platform_data = &pca953x_75_gpio_data,
"pca9539:74"))
pr_warn("cannot request interrupt gpio for pca9539:74\n");
+ vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7));
+
ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info,
ARRAY_SIZE(vision_i2c_info));
ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
#include "common.h"
+#ifdef CONFIG_PM_SLEEP
static struct sleep_save exynos4210_clock_save[] = {
SAVE_ITEM(S5P_CLKSRC_IMAGE),
SAVE_ITEM(S5P_CLKSRC_LCD1),
SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210),
};
+#endif
static struct clksrc_clk *sysclks[] = {
/* nothing here yet */
#include "common.h"
+#ifdef CONFIG_PM_SLEEP
static struct sleep_save exynos4212_clock_save[] = {
SAVE_ITEM(S5P_CLKSRC_IMAGE),
SAVE_ITEM(S5P_CLKDIV_IMAGE),
SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212),
SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212),
};
+#endif
static struct clk *clk_src_mpll_user_list[] = {
[0] = &clk_fin_mpll,
#include "common.h"
+#ifdef CONFIG_PM_SLEEP
static struct sleep_save exynos4_clock_save[] = {
SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
SAVE_ITEM(S5P_CLKGATE_IP_CPU),
};
+#endif
struct clk clk_sclk_hdmi27m = {
.name = "sclk_hdmi27m",
#include <linux/serial_core.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
#include <mach/map.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
-#include <plat/exynos4.h>
+
+#include "common.h"
/*
* The following lookup table is used to override device names when devices
static void __init exynos4210_dt_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
}
/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
.init_irq = exynos4_init_irq,
.map_io = exynos4210_dt_map_io,
+ .handle_irq = gic_handle_irq,
.init_machine = exynos4210_dt_machine_init,
.timer = &exynos4_timer,
.dt_compat = exynos4210_dt_compat,
+ .restart = exynos4_restart,
MACHINE_END
.lower_margin = 1,
.hsync_len = 48,
.vsync_len = 3,
- .xres = 1280,
- .yres = 800,
+ .xres = 1024,
+ .yres = 600,
.refresh = 60,
},
.max_bpp = 24,
.default_bpp = 16,
- .virtual_x = 1280,
- .virtual_y = 800,
+ .virtual_x = 1024,
+ .virtual_y = 2 * 600,
};
static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
.bus_type = FIMC_MIPI_CSI2,
.board_info = &m5mols_board_info,
.i2c_bus_num = 0,
- .clk_frequency = 21600000UL,
+ .clk_frequency = 24000000UL,
.csi_data_align = 32,
},
};
}
-static int exynos4_pm_add(struct device *dev)
+static int exynos4_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = exynos4_pm_prepare;
pm_cpu_sleep = exynos4_cpu_suspend;
exynos4_restore_pll();
+#ifdef CONFIG_SMP
scu_enable(S5P_VA_SCU);
+#endif
#ifdef CONFIG_CACHE_L2X0
s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save));
Include support for IMX27 IPCAM platform. This includes specific
configurations for the board and its peripherals.
+config MACH_IMX27_DT
+ bool "Support i.MX27 platforms from device tree"
+ select SOC_IMX27
+ select USE_OF
+ help
+ Include support for Freescale i.MX27 based platforms
+ using the device tree for discovery
+
endif
if ARCH_IMX_V6_V7
obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
obj-$(CONFIG_MACH_IMX27IPCAM) += mach-imx27ipcam.o
+obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o
# i.MX31 based machines
obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o
params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100
initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000
+dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb
+dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \
+ imx53-qsb.dtb imx53-smd.dtb
dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \
imx6q-sabrelite.dtb
#include <linux/io.h>
#include <linux/module.h>
#include <linux/clkdev.h>
+#include <linux/of.h>
#include <asm/div64.h>
return 0;
}
+#ifdef CONFIG_OF
+int __init mx27_clocks_init_dt(void)
+{
+ struct device_node *np;
+ u32 fref = 26000000; /* default */
+
+ for_each_compatible_node(np, NULL, "fixed-clock") {
+ if (!of_device_is_compatible(np, "fsl,imx-osc26m"))
+ continue;
+
+ if (!of_property_read_u32(np, "clock-frequency", &fref))
+ break;
+ }
+
+ return mx27_clocks_init(fref);
+}
+#endif
--- /dev/null
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/mx27.h>
+
+static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART1_BASE_ADDR, "imx21-uart.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART2_BASE_ADDR, "imx21-uart.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART3_BASE_ADDR, "imx21-uart.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx27-fec", MX27_FEC_BASE_ADDR, "imx27-fec.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI1_BASE_ADDR, "imx27-cspi.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI2_BASE_ADDR, "imx27-cspi.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI3_BASE_ADDR, "imx27-cspi.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx27-wdt", MX27_WDOG_BASE_ADDR, "imx2-wdt.0", NULL),
+ { /* sentinel */ }
+};
+
+static int __init imx27_avic_add_irq_domain(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ irq_domain_add_simple(np, 0);
+ return 0;
+}
+
+static int __init imx27_gpio_add_irq_domain(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
+
+ irq_domain_add_simple(np, gpio_irq_base);
+
+ return 0;
+}
+
+static const struct of_device_id imx27_irq_match[] __initconst = {
+ { .compatible = "fsl,imx27-avic", .data = imx27_avic_add_irq_domain, },
+ { .compatible = "fsl,imx27-gpio", .data = imx27_gpio_add_irq_domain, },
+ { /* sentinel */ }
+};
+
+static void __init imx27_dt_init(void)
+{
+ of_irq_init(imx27_irq_match);
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ imx27_auxdata_lookup, NULL);
+}
+
+static void __init imx27_timer_init(void)
+{
+ mx27_clocks_init_dt();
+}
+
+static struct sys_timer imx27_timer = {
+ .init = imx27_timer_init,
+};
+
+static const char *imx27_dt_board_compat[] __initdata = {
+ "fsl,imx27",
+ NULL
+};
+
+DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
+ .map_io = mx27_map_io,
+ .init_early = imx27_init_early,
+ .init_irq = mx27_init_irq,
+ .handle_irq = imx27_handle_irq,
+ .timer = &imx27_timer,
+ .init_machine = imx27_dt_init,
+ .dt_compat = imx27_dt_board_compat,
+ .restart = mxc_restart,
+MACHINE_END
static const char *imx51_dt_board_compat[] __initdata = {
"fsl,imx51-babbage",
+ "fsl,imx51",
NULL
};
"fsl,imx53-evk",
"fsl,imx53-qsb",
"fsl,imx53-smd",
+ "fsl,imx53",
NULL
};
static const char *imx6q_dt_compat[] __initdata = {
"fsl,imx6q-arm2",
"fsl,imx6q-sabrelite",
+ "fsl,imx6q",
NULL,
};
#include <plat/cache-feroceon-l2.h>
#include <plat/mvsdio.h>
#include <plat/orion_nand.h>
+#include <plat/ehci-orion.h>
#include <plat/common.h>
#include <plat/time.h>
#include <plat/addr-map.h>
void __init kirkwood_ehci_init(void)
{
kirkwood_clk_ctrl |= CGC_USB0;
- orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB);
+ orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA);
}
#define MPP_F6282_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 0, 1 )
#define MPP0_GPIO MPP( 0, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP0_NF_IO2 MPP( 0, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 1, 1, 1, 1, 1, 1 )
+#define MPP0_NF_IO2 MPP( 0, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 0, 1, 1, 1, 1, 1 )
#define MPP1_GPO MPP( 1, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP1_NF_IO3 MPP( 1, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 1, 1, 1, 1, 1, 1 )
+#define MPP1_NF_IO3 MPP( 1, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 0, 1, 1, 1, 1, 1 )
#define MPP2_GPO MPP( 2, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP2_NF_IO4 MPP( 2, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 1, 1, 1, 1, 1, 1 )
+#define MPP2_NF_IO4 MPP( 2, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 0, 1, 1, 1, 1, 1 )
#define MPP3_GPO MPP( 3, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP3_NF_IO5 MPP( 3, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP3_SPI_MISO MPP( 3, 0x2, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP3_NF_IO5 MPP( 3, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP3_SPI_MISO MPP( 3, 0x2, 0, 0, 1, 1, 1, 1, 1 )
#define MPP4_GPIO MPP( 4, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP4_NF_IO6 MPP( 4, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP4_UART0_RXD MPP( 4, 0x2, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP4_NF_IO6 MPP( 4, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP4_UART0_RXD MPP( 4, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 0, 0, 0, 1, 1, 1 )
#define MPP4_LCD_VGA_HSYNC MPP( 4, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP4_PTP_CLK MPP( 4, 0xd, 1, 0, 1, 1, 1, 1, 0 )
+#define MPP4_PTP_CLK MPP( 4, 0xd, 0, 0, 1, 1, 1, 1, 0 )
#define MPP5_GPO MPP( 5, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP5_NF_IO7 MPP( 5, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 1, 1, 1, 1, 1, 0 )
-#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP5_NF_IO7 MPP( 5, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 0, 0, 1, 1, 1, 1 )
#define MPP5_LCD_VGA_VSYNC MPP( 5, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 1, 1, 1, 1, 1, 0 )
+#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 0, 1, 1, 1, 1, 0 )
#define MPP7_GPO MPP( 7, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 1, 1, 1, 1, 1, 0 )
-#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 1, 1, 1, 1, 1, 0 )
-#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP8_TW0_SDA MPP( 8, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP8_MII0_RXERR MPP( 8, 0x4, 1, 0, 0, 1, 1, 1, 1 )
-#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP8_PTP_CLK MPP( 8, 0xc, 1, 0, 1, 1, 1, 1, 0 )
-#define MPP8_MII0_COL MPP( 8, 0xd, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP8_TW0_SDA MPP( 8, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP8_MII0_RXERR MPP( 8, 0x4, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP8_PTP_CLK MPP( 8, 0xc, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP8_MII0_COL MPP( 8, 0xd, 0, 0, 1, 1, 1, 1, 1 )
#define MPP9_GPIO MPP( 9, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP9_TW0_SCK MPP( 9, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP9_UART0_CTS MPP( 9, 0x2, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP9_UART1_CTS MPP( 9, 0x3, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 1, 0, 1, 1, 1, 1 )
-#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 1, 0, 1, 1, 1, 1, 0 )
-#define MPP9_MII0_CRS MPP( 9, 0xd, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP9_TW0_SCK MPP( 9, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP9_UART0_CTS MPP( 9, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP9_UART1_CTS MPP( 9, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP9_MII0_CRS MPP( 9, 0xd, 0, 0, 1, 1, 1, 1, 1 )
#define MPP10_GPO MPP( 10, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 1, 1, 1, 1, 1, 0 )
+#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 0, 1, 1, 1, 1, 0 )
#define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP11_SPI_MISO MPP( 11, 0x2, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP11_UART0_RXD MPP( 11, 0x3, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 1, 0, 1, 1, 1, 1, 0 )
-#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 1, 1, 1, 1, 1, 0 )
-#define MPP11_PTP_CLK MPP( 11, 0xd, 1, 0, 1, 1, 1, 1, 0 )
-#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP11_SPI_MISO MPP( 11, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP11_UART0_RXD MPP( 11, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP11_PTP_CLK MPP( 11, 0xd, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 0, 0, 1, 1, 1, 1 )
#define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 )
#define MPP12_GPIO MPP( 12, 0x0, 1, 1, 0, 0, 0, 1, 0 )
-#define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP12_TW1_SDA MPP( 12, 0xd, 1, 0, 0, 0, 0, 0, 1 )
+#define MPP12_SD_CLK MPP( 12, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP12_TW1_SDA MPP( 12, 0xd, 0, 0, 0, 0, 0, 0, 1 )
#define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP13_SD_CMD MPP( 13, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP13_LCDPWM MPP( 13, 0xb, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP13_SD_CMD MPP( 13, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP13_LCDPWM MPP( 13, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP14_GPIO MPP( 14, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP14_SD_D0 MPP( 14, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP14_UART1_RXD MPP( 14, 0x3, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP14_AU_SPDIFI MPP( 14, 0xa, 1, 0, 0, 0, 0, 0, 1 )
-#define MPP14_AU_I2SDI MPP( 14, 0xb, 1, 0, 0, 0, 0, 0, 1 )
-#define MPP14_MII0_COL MPP( 14, 0xd, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP14_SD_D0 MPP( 14, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP14_UART1_RXD MPP( 14, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP14_AU_SPDIFI MPP( 14, 0xa, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP14_AU_I2SDI MPP( 14, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP14_MII0_COL MPP( 14, 0xd, 0, 0, 1, 1, 1, 1, 1 )
#define MPP15_GPIO MPP( 15, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP15_SD_D1 MPP( 15, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 1, 0, 1, 1, 1, 1 )
-#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP15_SD_D1 MPP( 15, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP16_GPIO MPP( 16, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP16_SD_D2 MPP( 16, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP16_UART0_CTS MPP( 16, 0x2, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP16_UART1_RXD MPP( 16, 0x3, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 1, 0, 0, 0, 0, 0, 1 )
-#define MPP16_MII0_CRS MPP( 16, 0xd, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP16_SD_D2 MPP( 16, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP16_UART0_CTS MPP( 16, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP16_UART1_RXD MPP( 16, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP16_MII0_CRS MPP( 16, 0xd, 0, 0, 1, 1, 1, 1, 1 )
#define MPP17_GPIO MPP( 17, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP17_SD_D3 MPP( 17, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 1, 0, 1, 1, 1, 1 )
-#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP17_TW1_SCK MPP( 17, 0xd, 1, 1, 0, 0, 0, 0, 1 )
+#define MPP17_SD_D3 MPP( 17, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP17_TW1_SCK MPP( 17, 0xd, 0, 0, 0, 0, 0, 0, 1 )
#define MPP18_GPO MPP( 18, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP18_NF_IO0 MPP( 18, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP18_NF_IO0 MPP( 18, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 0, 0, 0, 0, 0, 1 )
#define MPP19_GPO MPP( 19, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP19_NF_IO1 MPP( 19, 0x1, 1, 1, 1, 1, 1, 1, 1 )
+#define MPP19_NF_IO1 MPP( 19, 0x1, 0, 0, 1, 1, 1, 1, 1 )
#define MPP20_GPIO MPP( 20, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP20_TSMP0 MPP( 20, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP20_TSMP0 MPP( 20, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP20_GE1_TXD0 MPP( 20, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP20_AU_SPDIFI MPP( 20, 0x4, 1, 0, 0, 0, 1, 1, 1 )
-#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP20_AU_SPDIFI MPP( 20, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 0, 0, 0, 1, 1, 1 )
#define MPP20_LCD_D0 MPP( 20, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP21_GPIO MPP( 21, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP21_TSMP1 MPP( 21, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP21_TSMP1 MPP( 21, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP21_GE1_TXD1 MPP( 21, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 0, 0, 1, 1, 1, 1 )
#define MPP21_LCD_D1 MPP( 21, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP22_GPIO MPP( 22, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP22_TSMP2 MPP( 22, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP22_TSMP2 MPP( 22, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP22_GE1_TXD2 MPP( 22, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 0, 0, 0, 1, 1, 1 )
#define MPP22_LCD_D2 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP23_GPIO MPP( 23, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP23_TSMP3 MPP( 23, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 1, 0, 0, 0, 1, 1, 1 )
+#define MPP23_TSMP3 MPP( 23, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP23_GE1_TXD3 MPP( 23, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 0, 0, 1, 1, 1, 1 )
#define MPP23_LCD_D3 MPP( 23, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP24_GPIO MPP( 24, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP24_TSMP4 MPP( 24, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP24_TSMP4 MPP( 24, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP24_GE1_RXD0 MPP( 24, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 0, 0, 0, 1, 1, 1 )
#define MPP24_LCD_D4 MPP( 24, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP25_GPIO MPP( 25, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP25_TSMP5 MPP( 25, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP25_TSMP5 MPP( 25, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP25_GE1_RXD1 MPP( 25, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 0, 0, 0, 1, 1, 1 )
#define MPP25_LCD_D5 MPP( 25, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP26_GPIO MPP( 26, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP26_TSMP6 MPP( 26, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 1, 0, 0, 0, 1, 1, 1 )
+#define MPP26_TSMP6 MPP( 26, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP26_GE1_RXD2 MPP( 26, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 0, 0, 0, 1, 1, 1 )
#define MPP26_LCD_D6 MPP( 26, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP27_GPIO MPP( 27, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP27_TSMP7 MPP( 27, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP27_TSMP7 MPP( 27, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP27_GE1_RXD3 MPP( 27, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP27_AU_I2SDI MPP( 27, 0x4, 1, 0, 0, 0, 1, 1, 1 )
+#define MPP27_AU_I2SDI MPP( 27, 0x4, 0, 0, 0, 0, 1, 1, 1 )
#define MPP27_LCD_D7 MPP( 27, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP28_GPIO MPP( 28, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP28_TSMP8 MPP( 28, 0x1, 1, 1, 0, 0, 1, 1, 1 )
+#define MPP28_TSMP8 MPP( 28, 0x1, 0, 0, 0, 0, 1, 1, 1 )
#define MPP28_TDM_CODEC_INTn MPP( 28, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP28_GE1_COL MPP( 28, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP28_AU_EXTCLK MPP( 28, 0x4, 1, 0, 0, 0, 1, 1, 1 )
+#define MPP28_AU_EXTCLK MPP( 28, 0x4, 0, 0, 0, 0, 1, 1, 1 )
#define MPP28_LCD_D8 MPP( 28, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP29_GPIO MPP( 29, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP29_TSMP9 MPP( 29, 0x1, 1, 1, 0, 0, 1, 1, 1 )
+#define MPP29_TSMP9 MPP( 29, 0x1, 0, 0, 0, 0, 1, 1, 1 )
#define MPP29_TDM_CODEC_RSTn MPP( 29, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP29_GE1_TCLK MPP( 29, 0x3, 0, 0, 0, 1, 1, 1, 1 )
#define MPP29_LCD_D9 MPP( 29, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP30_GPIO MPP( 30, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP30_TSMP10 MPP( 30, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP30_TDM_PCLK MPP( 30, 0x2, 1, 1, 0, 0, 1, 1, 1 )
+#define MPP30_TSMP10 MPP( 30, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP30_TDM_PCLK MPP( 30, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP30_GE1_RXCTL MPP( 30, 0x3, 0, 0, 0, 1, 1, 1, 1 )
#define MPP30_LCD_D10 MPP( 30, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP31_GPIO MPP( 31, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP31_TSMP11 MPP( 31, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP31_TDM_FS MPP( 31, 0x2, 1, 1, 0, 0, 1, 1, 1 )
+#define MPP31_TSMP11 MPP( 31, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP31_TDM_FS MPP( 31, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP31_GE1_RXCLK MPP( 31, 0x3, 0, 0, 0, 1, 1, 1, 1 )
#define MPP31_LCD_D11 MPP( 31, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP32_GPIO MPP( 32, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP32_TSMP12 MPP( 32, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP32_TDM_DRX MPP( 32, 0x2, 1, 0, 0, 0, 1, 1, 1 )
+#define MPP32_TSMP12 MPP( 32, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP32_TDM_DRX MPP( 32, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP32_GE1_TCLKOUT MPP( 32, 0x3, 0, 0, 0, 1, 1, 1, 1 )
#define MPP32_LCD_D12 MPP( 32, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP33_GPO MPP( 33, 0x0, 0, 1, 0, 1, 1, 1, 1 )
-#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP33_GE1_TXCTL MPP( 33, 0x3, 0, 0, 0, 1, 1, 1, 1 )
#define MPP33_LCD_D13 MPP( 33, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP34_GE1_TXEN MPP( 34, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 1, 0, 0, 0, 1, 1 )
+#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 0, 0, 0, 0, 1, 1 )
#define MPP34_LCD_D14 MPP( 34, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP35_GE1_RXERR MPP( 35, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 0, 0, 1, 1, 1, 1 )
#define MPP35_LCD_D15 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP35_MII0_RXERR MPP( 35, 0xc, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP35_MII0_RXERR MPP( 35, 0xc, 0, 0, 1, 1, 1, 1, 1 )
#define MPP36_GPIO MPP( 36, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP36_TSMP0 MPP( 36, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP36_AU_SPDIFI MPP( 36, 0x4, 1, 0, 1, 0, 0, 1, 1 )
-#define MPP36_TW1_SDA MPP( 36, 0xb, 1, 1, 0, 0, 0, 0, 1 )
+#define MPP36_TSMP0 MPP( 36, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP36_AU_SPDIFI MPP( 36, 0x4, 0, 0, 1, 0, 0, 1, 1 )
+#define MPP36_TW1_SDA MPP( 36, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP37_GPIO MPP( 37, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP37_TSMP1 MPP( 37, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 1, 1, 0, 0, 1, 1 )
-#define MPP37_TW1_SCK MPP( 37, 0xb, 1, 1, 0, 0, 0, 0, 1 )
+#define MPP37_TSMP1 MPP( 37, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 0, 1, 0, 0, 1, 1 )
+#define MPP37_TW1_SCK MPP( 37, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP38_GPIO MPP( 38, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP38_TSMP2 MPP( 38, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 1, 1, 0, 0, 1, 1 )
+#define MPP38_TSMP2 MPP( 38, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP38_LCD_D18 MPP( 38, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP39_GPIO MPP( 39, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP39_TSMP3 MPP( 39, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 1, 1, 0, 0, 1, 1 )
+#define MPP39_TSMP3 MPP( 39, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP39_LCD_D19 MPP( 39, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP40_GPIO MPP( 40, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP40_TSMP4 MPP( 40, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 1, 1, 0, 0, 1, 1 )
+#define MPP40_TSMP4 MPP( 40, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP40_LCD_D20 MPP( 40, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP41_GPIO MPP( 41, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP41_TSMP5 MPP( 41, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 1, 0, 0, 0, 0, 1, 1 )
-#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 1, 1, 0, 0, 1, 1 )
+#define MPP41_TSMP5 MPP( 41, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP41_LCD_D21 MPP( 41, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP42_GPIO MPP( 42, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP42_TSMP6 MPP( 42, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 1, 1, 0, 0, 1, 1 )
+#define MPP42_TSMP6 MPP( 42, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP42_LCD_D22 MPP( 42, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP43_GPIO MPP( 43, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP43_TSMP7 MPP( 43, 0x1, 1, 1, 0, 0, 0, 1, 1 )
+#define MPP43_TSMP7 MPP( 43, 0x1, 0, 0, 0, 0, 0, 1, 1 )
#define MPP43_TDM_CODEC_INTn MPP( 43, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP43_AU_I2SDI MPP( 43, 0x4, 1, 0, 1, 0, 0, 1, 1 )
+#define MPP43_AU_I2SDI MPP( 43, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP43_LCD_D23 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP44_GPIO MPP( 44, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP44_TSMP8 MPP( 44, 0x1, 1, 1, 0, 0, 0, 1, 1 )
+#define MPP44_TSMP8 MPP( 44, 0x1, 0, 0, 0, 0, 0, 1, 1 )
#define MPP44_TDM_CODEC_RSTn MPP( 44, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP44_AU_EXTCLK MPP( 44, 0x4, 1, 0, 1, 0, 0, 1, 1 )
+#define MPP44_AU_EXTCLK MPP( 44, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP44_LCD_CLK MPP( 44, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP45_GPIO MPP( 45, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP45_TSMP9 MPP( 45, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP45_TDM_PCLK MPP( 45, 0x2, 1, 1, 0, 0, 0, 1, 1 )
+#define MPP45_TSMP9 MPP( 45, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP45_TDM_PCLK MPP( 45, 0x2, 0, 0, 0, 0, 0, 1, 1 )
#define MPP245_LCD_E MPP( 45, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP46_GPIO MPP( 46, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP46_TSMP10 MPP( 46, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP46_TDM_FS MPP( 46, 0x2, 1, 1, 0, 0, 0, 1, 1 )
+#define MPP46_TSMP10 MPP( 46, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP46_TDM_FS MPP( 46, 0x2, 0, 0, 0, 0, 0, 1, 1 )
#define MPP46_LCD_HSYNC MPP( 46, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP47_GPIO MPP( 47, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP47_TSMP11 MPP( 47, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP47_TDM_DRX MPP( 47, 0x2, 1, 0, 0, 0, 0, 1, 1 )
+#define MPP47_TSMP11 MPP( 47, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP47_TDM_DRX MPP( 47, 0x2, 0, 0, 0, 0, 0, 1, 1 )
#define MPP47_LCD_VSYNC MPP( 47, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP48_TSMP12 MPP( 48, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 1, 0, 0, 0, 1, 1 )
+#define MPP48_TSMP12 MPP( 48, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 0, 0, 0, 0, 1, 1 )
#define MPP48_LCD_D16 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1, 0 )
#define MPP49_GPO MPP( 49, 0x0, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP49_TSMP9 MPP( 49, 0x1, 1, 1, 0, 0, 0, 1, 0 )
-#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP49_PTP_CLK MPP( 49, 0x5, 1, 0, 0, 0, 0, 1, 0 )
-#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP49_TSMP9 MPP( 49, 0x1, 0, 0, 0, 0, 0, 1, 0 )
+#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP49_PTP_CLK MPP( 49, 0x5, 0, 0, 0, 0, 0, 1, 0 )
+#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 0, 0, 0, 0, 0, 1 )
#define MPP49_LCD_D17 MPP( 49, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP_MAX 49
*/
#define IRQ_LPC32XX_JTAG_COMM_TX LPC32XX_SIC1_IRQ(1)
#define IRQ_LPC32XX_JTAG_COMM_RX LPC32XX_SIC1_IRQ(2)
-#define IRQ_LPC32XX_GPI_11 LPC32XX_SIC1_IRQ(4)
+#define IRQ_LPC32XX_GPI_28 LPC32XX_SIC1_IRQ(4)
#define IRQ_LPC32XX_TS_P LPC32XX_SIC1_IRQ(6)
#define IRQ_LPC32XX_TS_IRQ LPC32XX_SIC1_IRQ(7)
#define IRQ_LPC32XX_TS_AUX LPC32XX_SIC1_IRQ(8)
.event_group = &lpc32xx_event_pin_regs,
.mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT,
},
+ [IRQ_LPC32XX_GPI_28] = {
+ .event_group = &lpc32xx_event_pin_regs,
+ .mask = LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT,
+ },
[IRQ_LPC32XX_GPIO_00] = {
.event_group = &lpc32xx_event_int_regs,
.mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT,
if (state)
eventreg |= lpc32xx_events[d->irq].mask;
- else
+ else {
eventreg &= ~lpc32xx_events[d->irq].mask;
+ /*
+ * When disabling the wakeup, clear the latched
+ * event
+ */
+ __raw_writel(lpc32xx_events[d->irq].mask,
+ lpc32xx_events[d->irq].
+ event_group->rawstat_reg);
+ }
+
__raw_writel(eventreg,
lpc32xx_events[d->irq].event_group->enab_reg);
/* Setup SIC1 */
__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE));
- __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
- __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
+ __raw_writel(SIC1_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
+ __raw_writel(SIC1_ATR_DEFAULT,
+ LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
/* Setup SIC2 */
__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE));
- __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
- __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
+ __raw_writel(SIC2_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
+ __raw_writel(SIC2_ATR_DEFAULT,
+ LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
/* Configure supported IRQ's */
for (i = 0; i < NR_IRQS; i++) {
char *uart_ck_name;
u32 ck_mode_mask;
void __iomem *pdiv_clk_reg;
+ resource_size_t mapbase;
};
static struct uartinit uartinit_data[] __initdata = {
.ck_mode_mask =
LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5),
.pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL,
+ .mapbase = LPC32XX_UART5_BASE,
},
#endif
#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
.ck_mode_mask =
LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3),
.pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL,
+ .mapbase = LPC32XX_UART3_BASE,
},
#endif
#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
.ck_mode_mask =
LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4),
.pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL,
+ .mapbase = LPC32XX_UART4_BASE,
},
#endif
#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
.ck_mode_mask =
LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6),
.pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL,
+ .mapbase = LPC32XX_UART6_BASE,
},
#endif
};
/* pre-UART clock divider set to 1 */
__raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg);
+
+ /*
+ * Force a flush of the RX FIFOs to work around a
+ * HW bug
+ */
+ puart = uartinit_data[i].mapbase;
+ __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
+ __raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
+ j = LPC32XX_SUART_FIFO_SIZE;
+ while (j--)
+ tmp = __raw_readl(
+ LPC32XX_UART_DLL_FIFO(puart));
+ __raw_writel(0, LPC32XX_UART_IIR_FCR(puart));
}
/* This needs to be done after all UART clocks are setup */
__raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE);
- for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) {
+ for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
/* Force a flush of the RX FIFOs to work around a HW bug */
puart = serial_std_platform_data[i].mapbase;
__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
menu "Marvell PXA168/910/MMP2 Implmentations"
+config MACH_MMP_DT
+ bool "Support MMP2 platforms from device tree"
+ select CPU_PXA168
+ select CPU_PXA910
+ select USE_OF
+ help
+ Include support for Marvell MMP2 based platforms using
+ the device tree. Needn't select any other machine while
+ MACH_MMP_DT is enabled.
+
config MACH_ASPENITE
bool "Marvell's PXA168 Aspenite Development Board"
select CPU_PXA168
obj-$(CONFIG_MACH_BROWNSTONE) += brownstone.o
obj-$(CONFIG_MACH_FLINT) += flint.o
obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
+obj-$(CONFIG_MACH_MMP_DT) += mmp-dt.o
obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o
obj-$(CONFIG_MACH_GPLUGD) += gplugd.o
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/interrupt.h>
-#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
--- /dev/null
+/*
+ * linux/arch/arm/mach-mmp/mmp-dt.c
+ *
+ * Copyright (C) 2012 Marvell Technology Group Ltd.
+ * Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <mach/irqs.h>
+
+#include "common.h"
+
+extern struct sys_timer pxa168_timer;
+extern void __init icu_init_irq(void);
+
+static const struct of_dev_auxdata mmp_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL),
+ OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL),
+ OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4026000, "pxa2xx-uart.2", NULL),
+ OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL),
+ OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL),
+ OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL),
+ OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
+ {}
+};
+
+static int __init mmp_intc_add_irq_domain(struct device_node *np,
+ struct device_node *parent)
+{
+ irq_domain_add_simple(np, 0);
+ return 0;
+}
+
+static int __init mmp_gpio_add_irq_domain(struct device_node *np,
+ struct device_node *parent)
+{
+ irq_domain_add_simple(np, IRQ_GPIO_START);
+ return 0;
+}
+
+static const struct of_device_id mmp_irq_match[] __initconst = {
+ { .compatible = "mrvl,mmp-intc", .data = mmp_intc_add_irq_domain, },
+ { .compatible = "mrvl,mmp-gpio", .data = mmp_gpio_add_irq_domain, },
+ {}
+};
+
+static void __init mmp_dt_init(void)
+{
+
+ of_irq_init(mmp_irq_match);
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ mmp_auxdata_lookup, NULL);
+}
+
+static const char *pxa168_dt_board_compat[] __initdata = {
+ "mrvl,pxa168-aspenite",
+ NULL,
+};
+
+DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)")
+ .map_io = mmp_map_io,
+ .init_irq = icu_init_irq,
+ .timer = &pxa168_timer,
+ .init_machine = mmp_dt_init,
+ .dt_compat = pxa168_dt_board_compat,
+MACHINE_END
#include <mach/dma.h>
#include <mach/devices.h>
#include <mach/mfp.h>
-#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <mach/pxa168.h>
static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
static APBC_CLK(gpio, PXA168_GPIO, 0, 13000000);
static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
+static APBC_CLK(rtc, PXA168_RTC, 8, 32768);
static APMU_CLK(nand, NAND, 0x19b, 156000000);
static APMU_CLK(lcd, LCD, 0x7f, 312000000);
INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"),
+ INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
};
static int __init pxa168_init(void)
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/smc91x.h>
-#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/mv78xx0.h>
#include <mach/bridge-regs.h>
#include <plat/cache-feroceon-l2.h>
+#include <plat/ehci-orion.h>
#include <plat/orion_nand.h>
#include <plat/time.h>
#include <plat/common.h>
****************************************************************************/
void __init mv78xx0_ehci0_init(void)
{
- orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0);
+ orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0, EHCI_PHY_NA);
}
#define MPP_78100_A0_MASK MPP(0, 0x0, 0, 0, 1)
#define MPP0_GPIO MPP(0, 0x0, 1, 1, 1)
-#define MPP0_GE0_COL MPP(0, 0x1, 1, 0, 1)
-#define MPP0_GE1_TXCLK MPP(0, 0x2, 0, 1, 1)
+#define MPP0_GE0_COL MPP(0, 0x1, 0, 0, 1)
+#define MPP0_GE1_TXCLK MPP(0, 0x2, 0, 0, 1)
#define MPP0_UNUSED MPP(0, 0x3, 0, 0, 1)
#define MPP1_GPIO MPP(1, 0x0, 1, 1, 1)
-#define MPP1_GE0_RXERR MPP(1, 0x1, 1, 0, 1)
-#define MPP1_GE1_TXCTL MPP(1, 0x2, 0, 1, 1)
+#define MPP1_GE0_RXERR MPP(1, 0x1, 0, 0, 1)
+#define MPP1_GE1_TXCTL MPP(1, 0x2, 0, 0, 1)
#define MPP1_UNUSED MPP(1, 0x3, 0, 0, 1)
#define MPP2_GPIO MPP(2, 0x0, 1, 1, 1)
-#define MPP2_GE0_CRS MPP(2, 0x1, 1, 0, 1)
-#define MPP2_GE1_RXCTL MPP(2, 0x2, 1, 0, 1)
+#define MPP2_GE0_CRS MPP(2, 0x1, 0, 0, 1)
+#define MPP2_GE1_RXCTL MPP(2, 0x2, 0, 0, 1)
#define MPP2_UNUSED MPP(2, 0x3, 0, 0, 1)
#define MPP3_GPIO MPP(3, 0x0, 1, 1, 1)
-#define MPP3_GE0_TXERR MPP(3, 0x1, 0, 1, 1)
-#define MPP3_GE1_RXCLK MPP(3, 0x2, 1, 0, 1)
+#define MPP3_GE0_TXERR MPP(3, 0x1, 0, 0, 1)
+#define MPP3_GE1_RXCLK MPP(3, 0x2, 0, 0, 1)
#define MPP3_UNUSED MPP(3, 0x3, 0, 0, 1)
#define MPP4_GPIO MPP(4, 0x0, 1, 1, 1)
-#define MPP4_GE0_TXD4 MPP(4, 0x1, 0, 1, 1)
-#define MPP4_GE1_TXD0 MPP(4, 0x2, 0, 1, 1)
+#define MPP4_GE0_TXD4 MPP(4, 0x1, 0, 0, 1)
+#define MPP4_GE1_TXD0 MPP(4, 0x2, 0, 0, 1)
#define MPP4_UNUSED MPP(4, 0x3, 0, 0, 1)
#define MPP5_GPIO MPP(5, 0x0, 1, 1, 1)
-#define MPP5_GE0_TXD5 MPP(5, 0x1, 0, 1, 1)
-#define MPP5_GE1_TXD1 MPP(5, 0x2, 0, 1, 1)
+#define MPP5_GE0_TXD5 MPP(5, 0x1, 0, 0, 1)
+#define MPP5_GE1_TXD1 MPP(5, 0x2, 0, 0, 1)
#define MPP5_UNUSED MPP(5, 0x3, 0, 0, 1)
#define MPP6_GPIO MPP(6, 0x0, 1, 1, 1)
-#define MPP6_GE0_TXD6 MPP(6, 0x1, 0, 1, 1)
-#define MPP6_GE1_TXD2 MPP(6, 0x2, 0, 1, 1)
+#define MPP6_GE0_TXD6 MPP(6, 0x1, 0, 0, 1)
+#define MPP6_GE1_TXD2 MPP(6, 0x2, 0, 0, 1)
#define MPP6_UNUSED MPP(6, 0x3, 0, 0, 1)
#define MPP7_GPIO MPP(7, 0x0, 1, 1, 1)
-#define MPP7_GE0_TXD7 MPP(7, 0x1, 0, 1, 1)
-#define MPP7_GE1_TXD3 MPP(7, 0x2, 0, 1, 1)
+#define MPP7_GE0_TXD7 MPP(7, 0x1, 0, 0, 1)
+#define MPP7_GE1_TXD3 MPP(7, 0x2, 0, 0, 1)
#define MPP7_UNUSED MPP(7, 0x3, 0, 0, 1)
#define MPP8_GPIO MPP(8, 0x0, 1, 1, 1)
-#define MPP8_GE0_RXD4 MPP(8, 0x1, 1, 0, 1)
-#define MPP8_GE1_RXD0 MPP(8, 0x2, 1, 0, 1)
+#define MPP8_GE0_RXD4 MPP(8, 0x1, 0, 0, 1)
+#define MPP8_GE1_RXD0 MPP(8, 0x2, 0, 0, 1)
#define MPP8_UNUSED MPP(8, 0x3, 0, 0, 1)
#define MPP9_GPIO MPP(9, 0x0, 1, 1, 1)
-#define MPP9_GE0_RXD5 MPP(9, 0x1, 1, 0, 1)
-#define MPP9_GE1_RXD1 MPP(9, 0x2, 1, 0, 1)
+#define MPP9_GE0_RXD5 MPP(9, 0x1, 0, 0, 1)
+#define MPP9_GE1_RXD1 MPP(9, 0x2, 0, 0, 1)
#define MPP9_UNUSED MPP(9, 0x3, 0, 0, 1)
#define MPP10_GPIO MPP(10, 0x0, 1, 1, 1)
-#define MPP10_GE0_RXD6 MPP(10, 0x1, 1, 0, 1)
-#define MPP10_GE1_RXD2 MPP(10, 0x2, 1, 0, 1)
+#define MPP10_GE0_RXD6 MPP(10, 0x1, 0, 0, 1)
+#define MPP10_GE1_RXD2 MPP(10, 0x2, 0, 0, 1)
#define MPP10_UNUSED MPP(10, 0x3, 0, 0, 1)
#define MPP11_GPIO MPP(11, 0x0, 1, 1, 1)
-#define MPP11_GE0_RXD7 MPP(11, 0x1, 1, 0, 1)
-#define MPP11_GE1_RXD3 MPP(11, 0x2, 1, 0, 1)
+#define MPP11_GE0_RXD7 MPP(11, 0x1, 0, 0, 1)
+#define MPP11_GE1_RXD3 MPP(11, 0x2, 0, 0, 1)
#define MPP11_UNUSED MPP(11, 0x3, 0, 0, 1)
#define MPP12_GPIO MPP(12, 0x0, 1, 1, 1)
-#define MPP12_M_BB MPP(12, 0x3, 1, 0, 1)
-#define MPP12_UA0_CTSn MPP(12, 0x4, 1, 0, 1)
-#define MPP12_NAND_FLASH_REn0 MPP(12, 0x5, 0, 1, 1)
-#define MPP12_TDM0_SCSn MPP(12, 0X6, 0, 1, 1)
+#define MPP12_M_BB MPP(12, 0x3, 0, 0, 1)
+#define MPP12_UA0_CTSn MPP(12, 0x4, 0, 0, 1)
+#define MPP12_NAND_FLASH_REn0 MPP(12, 0x5, 0, 0, 1)
+#define MPP12_TDM0_SCSn MPP(12, 0X6, 0, 0, 1)
#define MPP12_UNUSED MPP(12, 0x1, 0, 0, 1)
#define MPP13_GPIO MPP(13, 0x0, 1, 1, 1)
-#define MPP13_SYSRST_OUTn MPP(13, 0x3, 0, 1, 1)
-#define MPP13_UA0_RTSn MPP(13, 0x4, 0, 1, 1)
-#define MPP13_NAN_FLASH_WEn0 MPP(13, 0x5, 0, 1, 1)
-#define MPP13_TDM_SCLK MPP(13, 0x6, 0, 1, 1)
+#define MPP13_SYSRST_OUTn MPP(13, 0x3, 0, 0, 1)
+#define MPP13_UA0_RTSn MPP(13, 0x4, 0, 0, 1)
+#define MPP13_NAN_FLASH_WEn0 MPP(13, 0x5, 0, 0, 1)
+#define MPP13_TDM_SCLK MPP(13, 0x6, 0, 0, 1)
#define MPP13_UNUSED MPP(13, 0x1, 0, 0, 1)
#define MPP14_GPIO MPP(14, 0x0, 1, 1, 1)
-#define MPP14_SATA1_ACTn MPP(14, 0x3, 0, 1, 1)
-#define MPP14_UA1_CTSn MPP(14, 0x4, 1, 0, 1)
-#define MPP14_NAND_FLASH_REn1 MPP(14, 0x5, 0, 1, 1)
-#define MPP14_TDM_SMOSI MPP(14, 0x6, 0, 1, 1)
+#define MPP14_SATA1_ACTn MPP(14, 0x3, 0, 0, 1)
+#define MPP14_UA1_CTSn MPP(14, 0x4, 0, 0, 1)
+#define MPP14_NAND_FLASH_REn1 MPP(14, 0x5, 0, 0, 1)
+#define MPP14_TDM_SMOSI MPP(14, 0x6, 0, 0, 1)
#define MPP14_UNUSED MPP(14, 0x1, 0, 0, 1)
#define MPP15_GPIO MPP(15, 0x0, 1, 1, 1)
-#define MPP15_SATA0_ACTn MPP(15, 0x3, 0, 1, 1)
-#define MPP15_UA1_RTSn MPP(15, 0x4, 0, 1, 1)
-#define MPP15_NAND_FLASH_WEn1 MPP(15, 0x5, 0, 1, 1)
-#define MPP15_TDM_SMISO MPP(15, 0x6, 1, 0, 1)
+#define MPP15_SATA0_ACTn MPP(15, 0x3, 0, 0, 1)
+#define MPP15_UA1_RTSn MPP(15, 0x4, 0, 0, 1)
+#define MPP15_NAND_FLASH_WEn1 MPP(15, 0x5, 0, 0, 1)
+#define MPP15_TDM_SMISO MPP(15, 0x6, 0, 0, 1)
#define MPP15_UNUSED MPP(15, 0x1, 0, 0, 1)
#define MPP16_GPIO MPP(16, 0x0, 1, 1, 1)
-#define MPP16_SATA1_PRESENTn MPP(16, 0x3, 0, 1, 1)
-#define MPP16_UA2_TXD MPP(16, 0x4, 0, 1, 1)
-#define MPP16_NAND_FLASH_REn3 MPP(16, 0x5, 0, 1, 1)
-#define MPP16_TDM_INTn MPP(16, 0x6, 1, 0, 1)
+#define MPP16_SATA1_PRESENTn MPP(16, 0x3, 0, 0, 1)
+#define MPP16_UA2_TXD MPP(16, 0x4, 0, 0, 1)
+#define MPP16_NAND_FLASH_REn3 MPP(16, 0x5, 0, 0, 1)
+#define MPP16_TDM_INTn MPP(16, 0x6, 0, 0, 1)
#define MPP16_UNUSED MPP(16, 0x1, 0, 0, 1)
#define MPP17_GPIO MPP(17, 0x0, 1, 1, 1)
-#define MPP17_SATA0_PRESENTn MPP(17, 0x3, 0, 1, 1)
-#define MPP17_UA2_RXD MPP(17, 0x4, 1, 0, 1)
-#define MPP17_NAND_FLASH_WEn3 MPP(17, 0x5, 0, 1, 1)
-#define MPP17_TDM_RSTn MPP(17, 0x6, 0, 1, 1)
+#define MPP17_SATA0_PRESENTn MPP(17, 0x3, 0, 0, 1)
+#define MPP17_UA2_RXD MPP(17, 0x4, 0, 0, 1)
+#define MPP17_NAND_FLASH_WEn3 MPP(17, 0x5, 0, 0, 1)
+#define MPP17_TDM_RSTn MPP(17, 0x6, 0, 0, 1)
#define MPP17_UNUSED MPP(17, 0x1, 0, 0, 1)
#define MPP18_GPIO MPP(18, 0x0, 1, 1, 1)
-#define MPP18_UA0_CTSn MPP(18, 0x4, 1, 0, 1)
-#define MPP18_BOOT_FLASH_REn MPP(18, 0x5, 0, 1, 1)
+#define MPP18_UA0_CTSn MPP(18, 0x4, 0, 0, 1)
+#define MPP18_BOOT_FLASH_REn MPP(18, 0x5, 0, 0, 1)
#define MPP18_UNUSED MPP(18, 0x1, 0, 0, 1)
#define MPP19_GPIO MPP(19, 0x0, 1, 1, 1)
-#define MPP19_UA0_CTSn MPP(19, 0x4, 0, 1, 1)
-#define MPP19_BOOT_FLASH_WEn MPP(19, 0x5, 0, 1, 1)
+#define MPP19_UA0_CTSn MPP(19, 0x4, 0, 0, 1)
+#define MPP19_BOOT_FLASH_WEn MPP(19, 0x5, 0, 0, 1)
#define MPP19_UNUSED MPP(19, 0x1, 0, 0, 1)
#define MPP20_GPIO MPP(20, 0x0, 1, 1, 1)
-#define MPP20_UA1_CTSs MPP(20, 0x4, 1, 0, 1)
-#define MPP20_TDM_PCLK MPP(20, 0x6, 1, 1, 0)
+#define MPP20_UA1_CTSs MPP(20, 0x4, 0, 0, 1)
+#define MPP20_TDM_PCLK MPP(20, 0x6, 0, 0, 0)
#define MPP20_UNUSED MPP(20, 0x1, 0, 0, 1)
#define MPP21_GPIO MPP(21, 0x0, 1, 1, 1)
-#define MPP21_UA1_CTSs MPP(21, 0x4, 0, 1, 1)
-#define MPP21_TDM_FSYNC MPP(21, 0x6, 1, 1, 0)
+#define MPP21_UA1_CTSs MPP(21, 0x4, 0, 0, 1)
+#define MPP21_TDM_FSYNC MPP(21, 0x6, 0, 0, 0)
#define MPP21_UNUSED MPP(21, 0x1, 0, 0, 1)
#define MPP22_GPIO MPP(22, 0x0, 1, 1, 1)
-#define MPP22_UA3_TDX MPP(22, 0x4, 0, 1, 1)
-#define MPP22_NAND_FLASH_REn2 MPP(22, 0x5, 0, 1, 1)
-#define MPP22_TDM_DRX MPP(22, 0x6, 1, 0, 1)
+#define MPP22_UA3_TDX MPP(22, 0x4, 0, 0, 1)
+#define MPP22_NAND_FLASH_REn2 MPP(22, 0x5, 0, 0, 1)
+#define MPP22_TDM_DRX MPP(22, 0x6, 0, 0, 1)
#define MPP22_UNUSED MPP(22, 0x1, 0, 0, 1)
#define MPP23_GPIO MPP(23, 0x0, 1, 1, 1)
-#define MPP23_UA3_RDX MPP(23, 0x4, 1, 0, 1)
-#define MPP23_NAND_FLASH_WEn2 MPP(23, 0x5, 0, 1, 1)
-#define MPP23_TDM_DTX MPP(23, 0x6, 0, 1, 1)
+#define MPP23_UA3_RDX MPP(23, 0x4, 0, 0, 1)
+#define MPP23_NAND_FLASH_WEn2 MPP(23, 0x5, 0, 0, 1)
+#define MPP23_TDM_DTX MPP(23, 0x6, 0, 0, 1)
#define MPP23_UNUSED MPP(23, 0x1, 0, 0, 1)
#define MPP24_GPIO MPP(24, 0x0, 1, 1, 1)
-#define MPP24_UA2_TXD MPP(24, 0x4, 0, 1, 1)
-#define MPP24_TDM_INTn MPP(24, 0x6, 1, 0, 1)
+#define MPP24_UA2_TXD MPP(24, 0x4, 0, 0, 1)
+#define MPP24_TDM_INTn MPP(24, 0x6, 0, 0, 1)
#define MPP24_UNUSED MPP(24, 0x1, 0, 0, 1)
#define MPP25_GPIO MPP(25, 0x0, 1, 1, 1)
-#define MPP25_UA2_RXD MPP(25, 0x4, 1, 0, 1)
-#define MPP25_TDM_RSTn MPP(25, 0x6, 0, 1, 1)
+#define MPP25_UA2_RXD MPP(25, 0x4, 0, 0, 1)
+#define MPP25_TDM_RSTn MPP(25, 0x6, 0, 0, 1)
#define MPP25_UNUSED MPP(25, 0x1, 0, 0, 1)
#define MPP26_GPIO MPP(26, 0x0, 1, 1, 1)
-#define MPP26_UA2_CTSn MPP(26, 0x4, 1, 0, 1)
-#define MPP26_TDM_PCLK MPP(26, 0x6, 1, 1, 1)
+#define MPP26_UA2_CTSn MPP(26, 0x4, 0, 0, 1)
+#define MPP26_TDM_PCLK MPP(26, 0x6, 0, 0, 1)
#define MPP26_UNUSED MPP(26, 0x1, 0, 0, 1)
#define MPP27_GPIO MPP(27, 0x0, 1, 1, 1)
-#define MPP27_UA2_RTSn MPP(27, 0x4, 0, 1, 1)
-#define MPP27_TDM_FSYNC MPP(27, 0x6, 1, 1, 1)
+#define MPP27_UA2_RTSn MPP(27, 0x4, 0, 0, 1)
+#define MPP27_TDM_FSYNC MPP(27, 0x6, 0, 0, 1)
#define MPP27_UNUSED MPP(27, 0x1, 0, 0, 1)
#define MPP28_GPIO MPP(28, 0x0, 1, 1, 1)
-#define MPP28_UA3_TXD MPP(28, 0x4, 0, 1, 1)
-#define MPP28_TDM_DRX MPP(28, 0x6, 1, 0, 1)
+#define MPP28_UA3_TXD MPP(28, 0x4, 0, 0, 1)
+#define MPP28_TDM_DRX MPP(28, 0x6, 0, 0, 1)
#define MPP28_UNUSED MPP(28, 0x1, 0, 0, 1)
#define MPP29_GPIO MPP(29, 0x0, 1, 1, 1)
-#define MPP29_UA3_RXD MPP(29, 0x4, 1, 0, 1)
-#define MPP29_SYSRST_OUTn MPP(29, 0x5, 0, 1, 1)
-#define MPP29_TDM_DTX MPP(29, 0x6, 0, 1, 1)
+#define MPP29_UA3_RXD MPP(29, 0x4, 0, 0, 1)
+#define MPP29_SYSRST_OUTn MPP(29, 0x5, 0, 0, 1)
+#define MPP29_TDM_DTX MPP(29, 0x6, 0, 0, 1)
#define MPP29_UNUSED MPP(29, 0x1, 0, 0, 1)
#define MPP30_GPIO MPP(30, 0x0, 1, 1, 1)
-#define MPP30_UA3_CTSn MPP(30, 0x4, 1, 0, 1)
+#define MPP30_UA3_CTSn MPP(30, 0x4, 0, 0, 1)
#define MPP30_UNUSED MPP(30, 0x1, 0, 0, 1)
#define MPP31_GPIO MPP(31, 0x0, 1, 1, 1)
-#define MPP31_UA3_RTSn MPP(31, 0x4, 0, 1, 1)
-#define MPP31_TDM1_SCSn MPP(31, 0x6, 0, 1, 1)
+#define MPP31_UA3_RTSn MPP(31, 0x4, 0, 0, 1)
+#define MPP31_TDM1_SCSn MPP(31, 0x6, 0, 0, 1)
#define MPP31_UNUSED MPP(31, 0x1, 0, 0, 1)
#define MPP32_GPIO MPP(32, 0x1, 1, 1, 1)
-#define MPP32_UA3_TDX MPP(32, 0x4, 0, 1, 1)
-#define MPP32_SYSRST_OUTn MPP(32, 0x5, 0, 1, 1)
-#define MPP32_TDM0_RXQ MPP(32, 0x6, 0, 1, 1)
+#define MPP32_UA3_TDX MPP(32, 0x4, 0, 0, 1)
+#define MPP32_SYSRST_OUTn MPP(32, 0x5, 0, 0, 1)
+#define MPP32_TDM0_RXQ MPP(32, 0x6, 0, 0, 1)
#define MPP32_UNUSED MPP(32, 0x3, 0, 0, 1)
#define MPP33_GPIO MPP(33, 0x1, 1, 1, 1)
-#define MPP33_UA3_RDX MPP(33, 0x4, 1, 0, 1)
-#define MPP33_TDM0_TXQ MPP(33, 0x6, 0, 1, 1)
+#define MPP33_UA3_RDX MPP(33, 0x4, 0, 0, 1)
+#define MPP33_TDM0_TXQ MPP(33, 0x6, 0, 0, 1)
#define MPP33_UNUSED MPP(33, 0x3, 0, 0, 1)
#define MPP34_GPIO MPP(34, 0x1, 1, 1, 1)
-#define MPP34_UA2_TDX MPP(34, 0x4, 0, 1, 1)
-#define MPP34_TDM1_RXQ MPP(34, 0x6, 0, 1, 1)
+#define MPP34_UA2_TDX MPP(34, 0x4, 0, 0, 1)
+#define MPP34_TDM1_RXQ MPP(34, 0x6, 0, 0, 1)
#define MPP34_UNUSED MPP(34, 0x3, 0, 0, 1)
#define MPP35_GPIO MPP(35, 0x1, 1, 1, 1)
-#define MPP35_UA2_RDX MPP(35, 0x4, 1, 0, 1)
-#define MPP35_TDM1_TXQ MPP(35, 0x6, 0, 1, 1)
+#define MPP35_UA2_RDX MPP(35, 0x4, 0, 0, 1)
+#define MPP35_TDM1_TXQ MPP(35, 0x6, 0, 0, 1)
#define MPP35_UNUSED MPP(35, 0x3, 0, 0, 1)
#define MPP36_GPIO MPP(36, 0x1, 1, 1, 1)
-#define MPP36_UA0_CTSn MPP(36, 0x2, 1, 0, 1)
-#define MPP36_UA2_TDX MPP(36, 0x4, 0, 1, 1)
-#define MPP36_TDM0_SCSn MPP(36, 0x6, 0, 1, 1)
+#define MPP36_UA0_CTSn MPP(36, 0x2, 0, 0, 1)
+#define MPP36_UA2_TDX MPP(36, 0x4, 0, 0, 1)
+#define MPP36_TDM0_SCSn MPP(36, 0x6, 0, 0, 1)
#define MPP36_UNUSED MPP(36, 0x3, 0, 0, 1)
#define MPP37_GPIO MPP(37, 0x1, 1, 1, 1)
-#define MPP37_UA0_RTSn MPP(37, 0x2, 0, 1, 1)
-#define MPP37_UA2_RXD MPP(37, 0x4, 1, 0, 1)
-#define MPP37_SYSRST_OUTn MPP(37, 0x5, 0, 1, 1)
-#define MPP37_TDM_SCLK MPP(37, 0x6, 0, 1, 1)
+#define MPP37_UA0_RTSn MPP(37, 0x2, 0, 0, 1)
+#define MPP37_UA2_RXD MPP(37, 0x4, 0, 0, 1)
+#define MPP37_SYSRST_OUTn MPP(37, 0x5, 0, 0, 1)
+#define MPP37_TDM_SCLK MPP(37, 0x6, 0, 0, 1)
#define MPP37_UNUSED MPP(37, 0x3, 0, 0, 1)
#define MPP38_GPIO MPP(38, 0x1, 1, 1, 1)
-#define MPP38_UA1_CTSn MPP(38, 0x2, 1, 0, 1)
-#define MPP38_UA3_TXD MPP(38, 0x4, 0, 1, 1)
-#define MPP38_SYSRST_OUTn MPP(38, 0x5, 0, 1, 1)
-#define MPP38_TDM_SMOSI MPP(38, 0x6, 0, 1, 1)
+#define MPP38_UA1_CTSn MPP(38, 0x2, 0, 0, 1)
+#define MPP38_UA3_TXD MPP(38, 0x4, 0, 0, 1)
+#define MPP38_SYSRST_OUTn MPP(38, 0x5, 0, 0, 1)
+#define MPP38_TDM_SMOSI MPP(38, 0x6, 0, 0, 1)
#define MPP38_UNUSED MPP(38, 0x3, 0, 0, 1)
#define MPP39_GPIO MPP(39, 0x1, 1, 1, 1)
-#define MPP39_UA1_RTSn MPP(39, 0x2, 0, 1, 1)
-#define MPP39_UA3_RXD MPP(39, 0x4, 1, 0, 1)
-#define MPP39_SYSRST_OUTn MPP(39, 0x5, 0, 1, 1)
-#define MPP39_TDM_SMISO MPP(39, 0x6, 1, 0, 1)
+#define MPP39_UA1_RTSn MPP(39, 0x2, 0, 0, 1)
+#define MPP39_UA3_RXD MPP(39, 0x4, 0, 0, 1)
+#define MPP39_SYSRST_OUTn MPP(39, 0x5, 0, 0, 1)
+#define MPP39_TDM_SMISO MPP(39, 0x6, 0, 0, 1)
#define MPP39_UNUSED MPP(39, 0x3, 0, 0, 1)
#define MPP40_GPIO MPP(40, 0x1, 1, 1, 1)
-#define MPP40_TDM_INTn MPP(40, 0x6, 1, 0, 1)
+#define MPP40_TDM_INTn MPP(40, 0x6, 0, 0, 1)
#define MPP40_UNUSED MPP(40, 0x0, 0, 0, 1)
#define MPP41_GPIO MPP(41, 0x1, 1, 1, 1)
-#define MPP41_TDM_RSTn MPP(41, 0x6, 0, 1, 1)
+#define MPP41_TDM_RSTn MPP(41, 0x6, 0, 0, 1)
#define MPP41_UNUSED MPP(41, 0x0, 0, 0, 1)
#define MPP42_GPIO MPP(42, 0x1, 1, 1, 1)
-#define MPP42_TDM_PCLK MPP(42, 0x6, 1, 1, 1)
+#define MPP42_TDM_PCLK MPP(42, 0x6, 0, 0, 1)
#define MPP42_UNUSED MPP(42, 0x0, 0, 0, 1)
#define MPP43_GPIO MPP(43, 0x1, 1, 1, 1)
-#define MPP43_TDM_FSYNC MPP(43, 0x6, 1, 1, 1)
+#define MPP43_TDM_FSYNC MPP(43, 0x6, 0, 0, 1)
#define MPP43_UNUSED MPP(43, 0x0, 0, 0, 1)
#define MPP44_GPIO MPP(44, 0x1, 1, 1, 1)
-#define MPP44_TDM_DRX MPP(44, 0x6, 1, 0, 1)
+#define MPP44_TDM_DRX MPP(44, 0x6, 0, 0, 1)
#define MPP44_UNUSED MPP(44, 0x0, 0, 0, 1)
#define MPP45_GPIO MPP(45, 0x1, 1, 1, 1)
-#define MPP45_SATA0_ACTn MPP(45, 0x3, 0, 1, 1)
-#define MPP45_TDM_DRX MPP(45, 0x6, 0, 1, 1)
+#define MPP45_SATA0_ACTn MPP(45, 0x3, 0, 0, 1)
+#define MPP45_TDM_DRX MPP(45, 0x6, 0, 0, 1)
#define MPP45_UNUSED MPP(45, 0x0, 0, 0, 1)
#define MPP46_GPIO MPP(46, 0x1, 1, 1, 1)
-#define MPP46_TDM_SCSn MPP(46, 0x6, 0, 1, 1)
+#define MPP46_TDM_SCSn MPP(46, 0x6, 0, 0, 1)
#define MPP46_UNUSED MPP(46, 0x0, 0, 0, 1)
#define MPP48_GPIO MPP(48, 0x1, 1, 1, 1)
-#define MPP48_SATA1_ACTn MPP(48, 0x3, 0, 1, 1)
+#define MPP48_SATA1_ACTn MPP(48, 0x3, 0, 0, 1)
#define MPP48_UNUSED MPP(48, 0x2, 0, 0, 1)
#define MPP49_GPIO MPP(49, 0x1, 1, 1, 1)
-#define MPP49_SATA0_ACTn MPP(49, 0x3, 0, 1, 1)
-#define MPP49_M_BB MPP(49, 0x4, 1, 0, 1)
+#define MPP49_SATA0_ACTn MPP(49, 0x3, 0, 0, 1)
+#define MPP49_M_BB MPP(49, 0x4, 0, 0, 1)
#define MPP49_UNUSED MPP(49, 0x2, 0, 0, 1)
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
omap1_usb_init(&innovator1510_usb_config);
- innovator_config[1].data = &innovator1510_lcd_config;
+ innovator_config[0].data = &innovator1510_lcd_config;
}
#endif
#ifdef CONFIG_ARCH_OMAP16XX
if (cpu_is_omap1610()) {
omap1_usb_init(&h2_usb_config);
- innovator_config[1].data = &innovator1610_lcd_config;
+ innovator_config[0].data = &innovator1610_lcd_config;
}
#endif
omap_board_config = innovator_config;
config MACH_OMAP_GENERIC
bool "Generic OMAP2+ board"
depends on ARCH_OMAP2PLUS
- select USE_OF
default y
help
Support for generic TI OMAP2+ boards using Flattened Device Tree.
going on could result in system crashes;
config OMAP4_ERRATA_I688
- bool "OMAP4 errata: Async Bridge Corruption (BROKEN)"
- depends on ARCH_OMAP4 && BROKEN
+ bool "OMAP4 errata: Async Bridge Corruption"
+ depends on ARCH_OMAP4
select ARCH_HAS_BARRIERS
help
If a data is stalled inside asynchronous bridge because of back
omap_hwmod_common_data.o
clock-common = clock.o clock_common_data.o \
clkt_dpll.o clkt_clksel.o
-secure-common = omap-smc.o omap-secure.o
+secure-common = omap-smc.o omap-secure.o
-obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
.reset_gpio_port[2] = -EINVAL
};
-static void cm_t35_init_usbh(void)
+static void __init cm_t35_init_usbh(void)
{
int err;
* published by the Free Software Foundation.
*/
#include <linux/io.h>
+#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/irqdomain.h>
#include <linux/i2c/twl.h>
#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
#include <plat/board.h>
#include "common.h"
#include "common-board-devices.h"
-/*
- * XXX: Still needed to boot until the i2c & twl driver is adapted to
- * device-tree
- */
-#ifdef CONFIG_ARCH_OMAP4
-static struct twl4030_platform_data sdp4430_twldata = {
- .irq_base = TWL6030_IRQ_BASE,
- .irq_end = TWL6030_IRQ_END,
-};
-
-static void __init omap4_i2c_init(void)
-{
- omap4_pmic_init("twl6030", &sdp4430_twldata);
-}
+#if !(defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3))
+#define omap_intc_of_init NULL
+#endif
+#ifndef CONFIG_ARCH_OMAP4
+#define gic_of_init NULL
#endif
-#ifdef CONFIG_ARCH_OMAP3
-static struct twl4030_platform_data beagle_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
+static struct of_device_id irq_match[] __initdata = {
+ { .compatible = "ti,omap2-intc", .data = omap_intc_of_init, },
+ { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+ { }
};
-static void __init omap3_i2c_init(void)
+static void __init omap_init_irq(void)
{
- omap3_pmic_init("twl4030", &beagle_twldata);
+ of_irq_init(irq_match);
}
-#endif
static struct of_device_id omap_dt_match_table[] __initdata = {
{ .compatible = "simple-bus", },
{ }
};
-static struct of_device_id intc_match[] __initdata = {
- { .compatible = "ti,omap3-intc", },
- { .compatible = "arm,cortex-a9-gic", },
- { }
-};
-
static void __init omap_generic_init(void)
{
- struct device_node *node = of_find_matching_node(NULL, intc_match);
- if (node)
- irq_domain_add_legacy(node, 32, 0, 0, &irq_domain_simple_ops, NULL);
-
omap_sdrc_init(NULL, NULL);
of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
}
-#ifdef CONFIG_ARCH_OMAP4
-static void __init omap4_init(void)
-{
- omap4_i2c_init();
- omap_generic_init();
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-static void __init omap3_init(void)
-{
- omap3_i2c_init();
- omap_generic_init();
-}
-#endif
-
-#if defined(CONFIG_SOC_OMAP2420)
+#ifdef CONFIG_SOC_OMAP2420
static const char *omap242x_boards_compat[] __initdata = {
"ti,omap2420",
NULL,
};
DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
- .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
- .init_irq = omap2_init_irq,
+ .init_irq = omap_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
.init_machine = omap_generic_init,
.timer = &omap2_timer,
.dt_compat = omap242x_boards_compat,
MACHINE_END
#endif
-#if defined(CONFIG_SOC_OMAP2430)
+#ifdef CONFIG_SOC_OMAP2430
static const char *omap243x_boards_compat[] __initdata = {
"ti,omap2430",
NULL,
};
DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
- .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap243x_map_io,
.init_early = omap2430_init_early,
- .init_irq = omap2_init_irq,
+ .init_irq = omap_init_irq,
.handle_irq = omap2_intc_handle_irq,
.init_machine = omap_generic_init,
.timer = &omap2_timer,
MACHINE_END
#endif
-#if defined(CONFIG_ARCH_OMAP3)
+#ifdef CONFIG_ARCH_OMAP3
+static struct twl4030_platform_data beagle_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+};
+
+static void __init omap3_i2c_init(void)
+{
+ omap3_pmic_init("twl4030", &beagle_twldata);
+}
+
+static void __init omap3_init(void)
+{
+ omap3_i2c_init();
+ omap_generic_init();
+}
+
static const char *omap3_boards_compat[] __initdata = {
"ti,omap3",
NULL,
};
DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
- .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3430_init_early,
- .init_irq = omap3_init_irq,
+ .init_irq = omap_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_init,
.timer = &omap3_timer,
.dt_compat = omap3_boards_compat,
MACHINE_END
#endif
-#if defined(CONFIG_ARCH_OMAP4)
+#ifdef CONFIG_ARCH_OMAP4
+static struct twl4030_platform_data sdp4430_twldata = {
+ .irq_base = TWL6030_IRQ_BASE,
+ .irq_end = TWL6030_IRQ_END,
+};
+
+static void __init omap4_i2c_init(void)
+{
+ omap4_pmic_init("twl6030", &sdp4430_twldata);
+}
+
+static void __init omap4_init(void)
+{
+ omap4_i2c_init();
+ omap_generic_init();
+}
+
static const char *omap4_boards_compat[] __initdata = {
"ti,omap4",
NULL,
};
DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
- .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
- .init_irq = gic_init_irq,
+ .init_irq = omap_init_irq,
+ .handle_irq = gic_handle_irq,
.init_machine = omap4_init,
.timer = &omap4_timer,
.dt_compat = omap4_boards_compat,
else
*openp = 0;
+#ifdef CONFIG_MMC_OMAP
omap_mmc_notify_cover_event(mmc_device, index, *openp);
+#else
+ pr_warn("MMC: notify cover event not available\n");
+#endif
}
static int n8x0_mmc_late_init(struct device *dev)
gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
- gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+ gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1;
platform_device_register(&leds_gpio);
void am33xx_map_io(void);
void omap4_map_io(void);
void ti81xx_map_io(void);
+void omap_barriers_init(void);
/**
* omap_test_timeout - busy-loop, testing a condition
extern void __iomem *omap4_get_l2cache_base(void);
#endif
+struct device_node;
+#ifdef CONFIG_OF
+int __init omap_intc_of_init(struct device_node *node,
+ struct device_node *parent);
+#else
+int __init omap_intc_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ return 0;
+}
+#endif
+
#ifdef CONFIG_SMP
extern void __iomem *omap4_get_scu_base(void);
#else
struct timespec ts_preidle, ts_postidle, ts_idle;
u32 cpu1_state;
int idle_time;
- int new_state_idx;
int cpu_id = smp_processor_id();
/* Used to keep track of the total time in idle */
*/
cpu1_state = pwrdm_read_pwrst(cpu1_pd);
if (cpu1_state != PWRDM_POWER_OFF) {
- new_state_idx = drv->safe_state_index;
- cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]);
+ index = drv->safe_state_index;
+ cx = cpuidle_get_statedata(&dev->states_usage[index]);
}
if (index > 0)
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <plat/board.h>
#include <plat/gpmc.h>
.flags = SMSC911X_USE_16BIT,
};
+static struct regulator_consumer_supply gpmc_smsc911x_supply[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
+/* Generic regulator definition to satisfy smsc911x */
+static struct regulator_init_data gpmc_smsc911x_reg_init_data = {
+ .constraints = {
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(gpmc_smsc911x_supply),
+ .consumer_supplies = gpmc_smsc911x_supply,
+};
+
+static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = {
+ .supply_name = "gpmc_smsc911x",
+ .microvolts = 3300000,
+ .gpio = -EINVAL,
+ .startup_delay = 0,
+ .enable_high = 0,
+ .enabled_at_boot = 1,
+ .init_data = &gpmc_smsc911x_reg_init_data,
+};
+
+/*
+ * Platform device id of 42 is a temporary fix to avoid conflicts
+ * with other reg-fixed-voltage devices. The real fix should
+ * involve the driver core providing a way of dynamically
+ * assigning a unique id on registration for platform devices
+ * in the same name space.
+ */
+static struct platform_device gpmc_smsc911x_regulator = {
+ .name = "reg-fixed-voltage",
+ .id = 42,
+ .dev = {
+ .platform_data = &gpmc_smsc911x_fixed_reg_data,
+ },
+};
+
/*
* Initialize smsc911x device connected to the GPMC. Note that we
* assume that pin multiplexing is done in the board-*.c file,
gpmc_cfg = board_data;
+ ret = platform_device_register(&gpmc_smsc911x_regulator);
+ if (ret < 0) {
+ pr_err("Unable to register smsc911x regulators: %d\n", ret);
+ return;
+ }
+
if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
pr_err("Failed to request GPMC mem region\n");
return;
return 0;
}
+static int omap_hsmmc_done;
#define MAX_OMAP_MMC_HWMOD_NAME_LEN 16
void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
{
u32 reg;
+ if (omap_hsmmc_done)
+ return;
+
+ omap_hsmmc_done = 1;
+
if (!cpu_is_omap44xx()) {
if (cpu_is_omap2430()) {
control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
void __init omap44xx_map_common_io(void)
{
iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+ omap_barriers_init();
}
#endif
* for more details.
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/exception.h>
#include <asm/mach/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
/* selected INTC register offsets */
},
};
+static struct irq_domain *domain;
+
/* Structure to save interrupt controller context */
struct omap3_intc_regs {
u32 sysconfig;
IRQ_NOREQUEST | IRQ_NOPROBE, 0);
}
-static void __init omap_init_irq(u32 base, int nr_irqs)
+static void __init omap_init_irq(u32 base, int nr_irqs,
+ struct device_node *node)
{
void __iomem *omap_irq_base;
unsigned long nr_of_irqs = 0;
unsigned int nr_banks = 0;
- int i, j;
+ int i, j, irq_base;
omap_irq_base = ioremap(base, SZ_4K);
if (WARN_ON(!omap_irq_base))
return;
+ irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0);
+ if (irq_base < 0) {
+ pr_warn("Couldn't allocate IRQ numbers\n");
+ irq_base = 0;
+ }
+
+ domain = irq_domain_add_legacy(node, nr_irqs, irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+
for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
struct omap_irq_bank *bank = irq_banks + i;
/* Static mapping, never released */
bank->base_reg = ioremap(base, SZ_4K);
if (!bank->base_reg) {
- printk(KERN_ERR "Could not ioremap irq bank%i\n", i);
+ pr_err("Could not ioremap irq bank%i\n", i);
continue;
}
omap_irq_bank_init_one(bank);
for (j = 0; j < bank->nr_irqs; j += 32)
- omap_alloc_gc(bank->base_reg + j, j, 32);
+ omap_alloc_gc(bank->base_reg + j, j + irq_base, 32);
nr_of_irqs += bank->nr_irqs;
nr_banks++;
}
- printk(KERN_INFO "Total of %ld interrupts on %d active controller%s\n",
- nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : "");
+ pr_info("Total of %ld interrupts on %d active controller%s\n",
+ nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : "");
}
void __init omap2_init_irq(void)
{
- omap_init_irq(OMAP24XX_IC_BASE, 96);
+ omap_init_irq(OMAP24XX_IC_BASE, 96, NULL);
}
void __init omap3_init_irq(void)
{
- omap_init_irq(OMAP34XX_IC_BASE, 96);
+ omap_init_irq(OMAP34XX_IC_BASE, 96, NULL);
}
void __init ti81xx_init_irq(void)
{
- omap_init_irq(OMAP34XX_IC_BASE, 128);
+ omap_init_irq(OMAP34XX_IC_BASE, 128, NULL);
}
static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs *regs)
irqnr = readl_relaxed(base_addr + INTCPS_SIR_IRQ_OFFSET);
irqnr &= ACTIVEIRQ_MASK;
- if (irqnr)
+ if (irqnr) {
+ irqnr = irq_find_mapping(domain, irqnr);
handle_IRQ(irqnr, regs);
+ }
} while (irqnr);
}
omap_intc_handle_irq(base_addr, regs);
}
+int __init omap_intc_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ struct resource res;
+ u32 nr_irqs = 96;
+
+ if (WARN_ON(!node))
+ return -ENODEV;
+
+ if (of_address_to_resource(node, 0, &res)) {
+ WARN(1, "unable to get intc registers\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32(node, "ti,intc-size", &nr_irqs))
+ pr_warn("unable to get intc-size, default to %d\n", nr_irqs);
+
+ omap_init_irq(res.start, nr_irqs, of_node_get(node));
+
+ return 0;
+}
+
#ifdef CONFIG_ARCH_OMAP3
static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)];
.ops = &omap2_mbox_ops,
.priv = &omap2_mbox_iva_priv,
};
+#endif
-struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL };
+#ifdef CONFIG_ARCH_OMAP2
+struct omap_mbox *omap2_mboxes[] = {
+ &mbox_dsp_info,
+#ifdef CONFIG_SOC_OMAP2420
+ &mbox_iva_info,
+#endif
+ NULL
+};
#endif
#if defined(CONFIG_ARCH_OMAP4)
platform_driver_unregister(&omap2_mbox_driver);
}
-module_init(omap2_mbox_init);
+/* must be ready before omap3isp is probed */
+subsys_initcall(omap2_mbox_init);
module_exit(omap2_mbox_exit);
MODULE_LICENSE("GPL v2");
return -ENODEV;
}
-static int __init
+static int
omap_mux_get_by_name(const char *muxname,
struct omap_mux_partition **found_partition,
struct omap_mux **found_mux)
#include <plat/irqs.h>
#include <plat/sram.h>
+#include <plat/omap-secure.h>
#include <mach/hardware.h>
#include <mach/omap-wakeupgen.h>
void __iomem *dram_sync, *sram_sync;
+static phys_addr_t paddr;
+static u32 size;
+
void omap_bus_sync(void)
{
if (dram_sync && sram_sync) {
}
}
-static int __init omap_barriers_init(void)
+/* Steal one page physical memory for barrier implementation */
+int __init omap_barrier_reserve_memblock(void)
{
- struct map_desc dram_io_desc[1];
- phys_addr_t paddr;
- u32 size;
-
- if (!cpu_is_omap44xx())
- return -ENODEV;
size = ALIGN(PAGE_SIZE, SZ_1M);
paddr = arm_memblock_steal(size, SZ_1M);
+ return 0;
+}
+
+void __init omap_barriers_init(void)
+{
+ struct map_desc dram_io_desc[1];
+
dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA;
dram_io_desc[0].pfn = __phys_to_pfn(paddr);
dram_io_desc[0].length = size;
pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n",
(long long) paddr, dram_io_desc[0].virtual);
- return 0;
}
-core_initcall(omap_barriers_init);
+#else
+void __init omap_barriers_init(void)
+{}
#endif
void __init gic_init_irq(void)
freq = clk->rate;
clk_put(clk);
+ rcu_read_lock();
opp = opp_find_freq_ceil(dev, &freq);
if (IS_ERR(opp)) {
+ rcu_read_unlock();
pr_err("%s: unable to find boot up OPP for vdd_%s\n",
__func__, vdd_name);
goto exit;
}
bootup_volt = opp_get_voltage(opp);
+ rcu_read_unlock();
if (!bootup_volt) {
pr_err("%s: unable to find voltage corresponding "
"to the bootup OPP for vdd_%s\n", __func__, vdd_name);
static int __init omap2_common_pm_late_init(void)
{
+ /*
+ * In the case of DT, the PMIC and SR initialization will be done using
+ * a completely different mechanism.
+ * Disable this part if a DT blob is available.
+ */
+ if (of_have_populated_dt())
+ return 0;
+
/* Init the voltage layer */
omap_pmic_late_init();
omap_voltage_late_init();
f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
- /* Ignore UART clocks. These are handled by UART core (serial.c) */
- f1 &= ~(OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_UART2_MASK);
- f2 &= ~OMAP24XX_EN_UART3_MASK;
-
- if (f1 | f2)
- return 1;
- return 0;
+ return (f1 | f2) ? 1 : 0;
}
static void omap2_enter_full_retention(void)
void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
{
struct omap_hwmod *oh[2];
- struct omap_device *od;
+ struct platform_device *pdev;
int bus_id = -1;
int i;
return;
}
- od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
+ pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
(void *)&usbhs_data, sizeof(usbhs_data),
omap_uhhtll_latency,
ARRAY_SIZE(omap_uhhtll_latency), false);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
pr_err("Could not build hwmod devices %s,%s\n",
USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME);
return;
* XXX Will depend on the process, validation, and binning
* for the currently-running IC
*/
+#ifdef CONFIG_PM_OPP
if (cpu_is_omap3630()) {
omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data;
omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data;
omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data;
omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data;
}
+#endif
if (cpu_is_omap3517() || cpu_is_omap3505())
voltdms = voltagedomains_am35xx;
* XXX Will depend on the process, validation, and binning
* for the currently-running IC
*/
+#ifdef CONFIG_PM_OPP
omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data;
omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data;
omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data;
+#endif
for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++)
voltdm->sys_clk.name = sys_clk_name;
#include <mach/hardware.h>
#include <mach/orion5x.h>
#include <plat/orion_nand.h>
+#include <plat/ehci-orion.h>
#include <plat/time.h>
#include <plat/common.h>
#include <plat/addr-map.h>
****************************************************************************/
void __init orion5x_ehci0_init(void)
{
- orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL);
+ orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL,
+ EHCI_PHY_ORION);
}
#include <mach/hx4700.h>
#include <mach/irda.h>
+#include <sound/ak4641.h>
#include <video/platform_lcd.h>
#include <video/w100fb.h>
},
};
+/*
+ * Asahi Kasei AK4641 on I2C
+ */
+
+static struct ak4641_platform_data ak4641_info = {
+ .gpio_power = GPIO27_HX4700_CODEC_ON,
+ .gpio_npdn = GPIO109_HX4700_CODEC_nPDN,
+};
+
+static struct i2c_board_info i2c_board_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("ak4641", 0x12),
+ .platform_data = &ak4641_info,
+ },
+};
+
+static struct platform_device audio = {
+ .name = "hx4700-audio",
+ .id = -1,
+};
+
+
/*
* PCMCIA
*/
&gpio_vbus,
&power_supply,
&strataflash,
+ &audio,
&pcmcia,
};
pxa_set_ficp_info(&ficp_info);
pxa27x_set_i2c_power_info(NULL);
pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info));
i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
#include <linux/suspend.h>
#include <linux/syscore_ops.h>
#include <linux/irq.h>
-#include <linux/gpio.h>
#include <asm/mach/map.h>
#include <asm/suspend.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/i2c/pxa-i2c.h>
-#include <linux/gpio.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/mfd/88pm860x.h>
-#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#define MAXCTRL_SEL_SH 4
#define MAXCTRL_STR (1u << 7)
+extern int max1111_read_channel(int);
/*
* Read MAX1111 ADC
*/
if (machine_is_tosa())
return 0;
- extern int max1111_read_channel(int);
-
/* max1111 accepts channels from 0-3, however,
* it is encoded from 0-7 here in the code.
*/
static unsigned long spitz_charger_wakeup(void)
{
unsigned long ret;
- ret = (!gpio_get_value(SPITZ_GPIO_KEY_INT)
+ ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT)
<< GPIO_bit(SPITZ_GPIO_KEY_INT))
- | (!gpio_get_value(SPITZ_GPIO_SYNC)
- << GPIO_bit(SPITZ_GPIO_SYNC));
+ | gpio_get_value(SPITZ_GPIO_SYNC));
return ret;
}
.debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
};
-static int s3c2410_cpufreq_add(struct device *dev)
+static int s3c2410_cpufreq_add(struct device *dev,
+ struct subsys_interface *sif)
{
return s3c_cpufreq_register(&s3c2410_cpufreq_info);
}
arch_initcall(s3c2410_cpufreq_init);
-static int s3c2410a_cpufreq_add(struct device *dev)
+static int s3c2410a_cpufreq_add(struct device *dev,
+ struct subsys_interface *sif)
{
/* alter the maximum freq settings for S3C2410A. If a board knows
* it only has a maximum of 200, then it should register its own
s3c2410_cpufreq_info.max.pclk = 66500000;
s3c2410_cpufreq_info.name = "s3c2410a";
- return s3c2410_cpufreq_add(dev);
+ return s3c2410_cpufreq_add(dev, sif);
}
static struct subsys_interface s3c2410a_cpufreq_interface = {
},
};
-static int __init s3c2410_dma_add(struct device *dev)
+static int __init s3c2410_dma_add(struct device *dev,
+ struct subsys_interface *sif)
{
s3c2410_dma_init();
s3c24xx_dma_order_set(&s3c2410_dma_order);
static int __init s3c2410_dma_drvinit(void)
{
- return subsys_interface_register(&s3c2410_interface);
+ return subsys_interface_register(&s3c2410_dma_interface);
}
arch_initcall(s3c2410_dma_drvinit);
{ .frequency = 270000000, .index = PLLVAL(127, 1, 1), },
};
-static int s3c2410_plls_add(struct device *dev)
+static int s3c2410_plls_add(struct device *dev, struct subsys_interface *sif)
{
return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
}
.resume = s3c2410_pm_resume,
};
-static int s3c2410_pm_add(struct device *dev)
+static int s3c2410_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = s3c2410_pm_prepare;
pm_cpu_sleep = s3c2410_cpu_suspend;
.debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
};
-static int s3c2412_cpufreq_add(struct device *dev)
+static int s3c2412_cpufreq_add(struct device *dev,
+ struct subsys_interface *sif)
{
unsigned long fclk_rate;
.map_size = ARRAY_SIZE(s3c2412_dma_mappings),
};
-static int __init s3c2412_dma_add(struct device *dev)
+static int __init s3c2412_dma_add(struct device *dev,
+ struct subsys_interface *sif)
{
s3c2410_dma_init();
return s3c24xx_dma_init_map(&s3c2412_dma_sel);
static struct irq_chip s3c2412_irq_rtc_chip;
-static int s3c2412_irq_add(struct device *dev)
+static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif)
{
unsigned int irqno;
{
}
-static int s3c2412_pm_add(struct device *dev)
+static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = s3c2412_pm_prepare;
pm_cpu_sleep = s3c2412_cpu_suspend;
return 0;
}
-static int __init s3c2416_irq_add(struct device *dev)
+static int __init s3c2416_irq_add(struct device *dev,
+ struct subsys_interface *sif)
{
printk(KERN_INFO "S3C2416: IRQ Support\n");
__raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1);
}
-static int s3c2416_pm_add(struct device *dev)
+static int s3c2416_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = s3c2416_pm_prepare;
pm_cpu_sleep = s3c2416_cpu_suspend;
CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
};
-static int s3c2440_clk_add(struct device *dev)
+static int s3c2440_clk_add(struct device *dev, struct subsys_interface *sif)
{
struct clk *clock_upll;
struct clk *clock_h;
},
};
-static int __init s3c2440_dma_add(struct device *dev)
+static int __init s3c2440_dma_add(struct device *dev,
+ struct subsys_interface *sif)
{
s3c2410_dma_init();
s3c24xx_dma_order_set(&s3c2440_dma_order);
.irq_ack = s3c_irq_wdtac97_ack,
};
-static int s3c2440_irq_add(struct device *dev)
+static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif)
{
unsigned int irqno;
.debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
};
-static int s3c2440_cpufreq_add(struct device *dev)
+static int s3c2440_cpufreq_add(struct device *dev,
+ struct subsys_interface *sif)
{
xtal = s3c_cpufreq_clk_get(NULL, "xtal");
hclk = s3c_cpufreq_clk_get(NULL, "hclk");
{ .frequency = 400000000, .index = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */
};
-static int s3c2440_plls12_add(struct device *dev)
+static int s3c2440_plls12_add(struct device *dev, struct subsys_interface *sif)
{
struct clk *xtal_clk;
unsigned long xtal;
{ .frequency = 402192000, .index = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */
};
-static int s3c2440_plls169344_add(struct device *dev)
+static int s3c2440_plls169344_add(struct device *dev,
+ struct subsys_interface *sif)
{
struct clk *xtal_clk;
unsigned long xtal;
},
};
-static int s3c2442_clk_add(struct device *dev)
+static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif)
{
struct clk *clock_upll;
struct clk *clock_h;
},
};
-static int s3c244x_clk_add(struct device *dev)
+static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif)
{
unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
unsigned long clkdivn;
.irq_ack = s3c_irq_cam_ack,
};
-static int s3c244x_irq_add(struct device *dev)
+static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif)
{
unsigned int irqno;
.map_size = ARRAY_SIZE(s3c2443_dma_mappings),
};
-static int __init s3c2443_dma_add(struct device *dev)
+static int __init s3c2443_dma_add(struct device *dev,
+ struct subsys_interface *sif)
{
s3c24xx_dma_init(6, IRQ_S3C2443_DMA0, 0x100);
return s3c24xx_dma_init_map(&s3c2443_dma_sel);
return 0;
}
-static int __init s3c2443_irq_add(struct device *dev)
+static int __init s3c2443_irq_add(struct device *dev,
+ struct subsys_interface *sif)
{
printk("S3C2443: IRQ Support\n");
.ctrlbit = S3C_CLKCON_PCLK_TSADC,
}, {
.name = "i2c",
+#ifdef CONFIG_S3C_DEV_I2C1
+ .devname = "s3c2440-i2c.0",
+#else
+ .devname = "s3c2440-i2c",
+#endif
.parent = &clk_p,
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_IIC,
/* uart registration process */
-void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
}
}
-static int s5p64x0_pm_add(struct device *dev)
+static int s5p64x0_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = s5p64x0_pm_prepare;
pm_cpu_sleep = s5p64x0_cpu_suspend;
return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable);
}
-static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+static int s5pv210_clk_hdmiphy_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
}
}, {
.name = "hdmiphy",
.devname = "s5pv210-hdmi",
- .enable = exynos4_clk_hdmiphy_ctrl,
+ .enable = s5pv210_clk_hdmiphy_ctrl,
.ctrlbit = (1 << 0),
}, {
.name = "dacphy",
s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save));
}
-static int s5pv210_pm_add(struct device *dev)
+static int s5pv210_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = s5pv210_pm_prepare;
pm_cpu_sleep = s5pv210_cpu_suspend;
#include <linux/serial_sci.h>
#include <linux/smsc911x.h>
#include <linux/gpio.h>
+#include <linux/videodev2.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/sh_clk.h>
-#include <linux/dma-mapping.h>
#include <video/sh_mobile_lcdc.h>
#include <video/sh_mipi_dsi.h>
#include <sound/sh_fsi.h>
},
};
-static struct sh_mmcif_dma sh_mmcif_dma = {
- .chan_priv_rx = {
- .slave_id = SHDMA_SLAVE_MMCIF_RX,
- },
- .chan_priv_tx = {
- .slave_id = SHDMA_SLAVE_MMCIF_TX,
- },
-};
static struct sh_mmcif_plat_data sh_mmcif_platdata = {
.sup_pclk = 0,
.ocr = MMC_VDD_165_195,
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
- .dma = &sh_mmcif_dma,
+ .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
+ .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct platform_device mmc_device = {
},
};
-#define DSI0PHYCR 0xe615006c
static int sh_mipi_set_dot_clock(struct platform_device *pdev,
void __iomem *base,
int enable)
{
- struct clk *pck;
+ struct clk *pck, *phy;
int ret;
pck = clk_get(&pdev->dev, "dsip_clk");
goto sh_mipi_set_dot_clock_pck_err;
}
+ phy = clk_get(&pdev->dev, "dsiphy_clk");
+ if (IS_ERR(phy)) {
+ ret = PTR_ERR(phy);
+ goto sh_mipi_set_dot_clock_phy_err;
+ }
+
if (enable) {
clk_set_rate(pck, clk_round_rate(pck, 24000000));
- __raw_writel(0x2a809010, DSI0PHYCR);
+ clk_set_rate(phy, clk_round_rate(pck, 510000000));
clk_enable(pck);
+ clk_enable(phy);
} else {
clk_disable(pck);
+ clk_disable(phy);
}
ret = 0;
+ clk_put(phy);
+sh_mipi_set_dot_clock_phy_err:
clk_put(pck);
-
sh_mipi_set_dot_clock_pck_err:
return ret;
}
},
};
-static struct sh_mmcif_dma sh_mmcif_dma = {
- .chan_priv_rx = {
- .slave_id = SHDMA_SLAVE_MMCIF_RX,
- },
- .chan_priv_tx = {
- .slave_id = SHDMA_SLAVE_MMCIF_TX,
- },
-};
-
static struct sh_mmcif_plat_data sh_mmcif_plat = {
.sup_pclk = 0,
.ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
MMC_CAP_8_BIT_DATA |
MMC_CAP_NEEDS_POLL,
.get_cd = slot_cn7_get_cd,
- .dma = &sh_mmcif_dma,
+ .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
+ .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct platform_device sh_mmcif_device = {
static struct gpio_keys_platform_data gpio_key_info = {
.buttons = gpio_buttons,
.nbuttons = ARRAY_SIZE(gpio_buttons),
- .poll_interval = 250, /* polled for now */
};
static struct platform_device gpio_keys_device = {
- .name = "gpio-keys-polled", /* polled for now */
+ .name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &gpio_key_info,
#include <linux/smsc911x.h>
#include <linux/sh_intc.h>
#include <linux/tca6416_keypad.h>
-#include <linux/usb/r8a66597.h>
#include <linux/usb/renesas_usbhs.h>
#include <linux/dma-mapping.h>
* 1-2 short | VBUS 5V | Host
* open | external VBUS | Function
*
- * *1
- * CN31 is used as
- * CONFIG_USB_R8A66597_HCD Host
- * CONFIG_USB_RENESAS_USBHS Function
- *
* CAUTION
*
* renesas_usbhs driver can use external interrupt mode
* mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0",
* because Touchscreen is using IRQ7-PORT40.
* It is impossible to use IRQ7 demux on this board.
- *
- * We can use external interrupt mode USB-Function on "USB1".
- * USB1 can become Host by r8a66597, and become Function by renesas_usbhs.
- * But don't select both drivers in same time.
- * These uses same IRQ number for request_irq(), and aren't supporting
- * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE.
- *
- * Actually these are old/new version of USB driver.
- * This mean its register will be broken if it supports shared IRQ,
*/
/*
*
*/
+/*
+ * FSI - AK4642
+ *
+ * it needs amixer settings for playing
+ *
+ * amixer set "Headphone" on
+ * amixer set "HPOUTL Mixer DACH" on
+ * amixer set "HPOUTR Mixer DACH" on
+ */
+
/*
* FIXME !!
*
* Use J30 to select between Host and Function. This setting
* can however not be detected by software. Hotplug of USBHS1
* is provided via IRQ8.
+ *
+ * Current USB1 works as "USB Host".
+ * - set J30 "short"
+ *
+ * If you want to use it as "USB gadget",
+ * - J30 "open"
+ * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
+ * - add .get_vbus = usbhs_get_vbus in usbhs1_private
*/
#define IRQ8 evt2irq(0x0300)
-
-/* USBHS1 USB Host support via r8a66597_hcd */
-static void usb1_host_port_power(int port, int power)
-{
- if (!power) /* only power-on is supported for now */
- return;
-
- /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
- __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008);
-}
-
-static struct r8a66597_platdata usb1_host_data = {
- .on_chip = 1,
- .port_power = usb1_host_port_power,
-};
-
-static struct resource usb1_host_resources[] = {
- [0] = {
- .name = "USBHS1",
- .start = 0xe68b0000,
- .end = 0xe68b00e6 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x1ce0) /* USB1_USB1I0 */,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usb1_host_device = {
- .name = "r8a66597_hcd",
- .id = 1,
- .dev = {
- .dma_mask = NULL, /* not use dma */
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usb1_host_data,
- },
- .num_resources = ARRAY_SIZE(usb1_host_resources),
- .resource = usb1_host_resources,
-};
-
-/* USBHS1 USB Function support via renesas_usbhs */
-
#define USB_PHY_MODE (1 << 4)
#define USB_PHY_INT_EN ((1 << 3) | (1 << 2))
#define USB_PHY_ON (1 << 1)
static int usbhs1_get_id(struct platform_device *pdev)
{
- return USBHS_GADGET;
+ return USBHS_HOST;
}
static u32 usbhs1_pipe_cfg[] = {
.hardware_exit = usbhs1_hardware_exit,
.get_id = usbhs1_get_id,
.phy_reset = usbhs_phy_reset,
- .get_vbus = usbhs_get_vbus,
},
.driver_param = {
.buswait_bwait = 4,
},
};
-static struct sh_mmcif_dma sh_mmcif_dma = {
- .chan_priv_rx = {
- .slave_id = SHDMA_SLAVE_MMCIF_RX,
- },
- .chan_priv_tx = {
- .slave_id = SHDMA_SLAVE_MMCIF_TX,
- },
-};
-
static struct sh_mmcif_plat_data sh_mmcif_plat = {
.sup_pclk = 0,
.ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
MMC_CAP_8_BIT_DATA |
MMC_CAP_NEEDS_POLL,
.get_cd = slot_cn7_get_cd,
- .dma = &sh_mmcif_dma,
+ .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
+ .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct platform_device sh_mmcif_device = {
&nor_flash_device,
&smc911x_device,
&lcdc_device,
- &usb1_host_device,
&usbhs1_device,
&usbhs0_device,
&leds_device,
gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
gpio_request(GPIO_FN_IDIN_1_113, NULL);
- /* USB phy tweak to make the r8a66597_hcd host driver work */
- __raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */
-
/* enable FSI2 port A (ak4643) */
gpio_request(GPIO_FN_FSIAIBT, NULL);
gpio_request(GPIO_FN_FSIAILR, NULL);
dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3),
};
+/* DSI DIV */
+static unsigned long dsiphy_recalc(struct clk *clk)
+{
+ u32 value;
+
+ value = __raw_readl(clk->mapping->base);
+
+ /* FIXME */
+ if (!(value & 0x000B8000))
+ return clk->parent->rate;
+
+ value &= 0x3f;
+ value += 1;
+
+ if ((value < 12) ||
+ (value > 33)) {
+ pr_err("DSIPHY has wrong value (%d)", value);
+ return 0;
+ }
+
+ return clk->parent->rate / value;
+}
+
+static long dsiphy_round_rate(struct clk *clk, unsigned long rate)
+{
+ return clk_rate_mult_range_round(clk, 12, 33, rate);
+}
+
+static void dsiphy_disable(struct clk *clk)
+{
+ u32 value;
+
+ value = __raw_readl(clk->mapping->base);
+ value &= ~0x000B8000;
+
+ __raw_writel(value , clk->mapping->base);
+}
+
+static int dsiphy_enable(struct clk *clk)
+{
+ u32 value;
+ int multi;
+
+ value = __raw_readl(clk->mapping->base);
+ multi = (value & 0x3f) + 1;
+
+ if ((multi < 12) || (multi > 33))
+ return -EIO;
+
+ __raw_writel(value | 0x000B8000, clk->mapping->base);
+
+ return 0;
+}
+
+static int dsiphy_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 value;
+ int idx;
+
+ idx = rate / clk->parent->rate;
+ if ((idx < 12) || (idx > 33))
+ return -EINVAL;
+
+ idx += -1;
+
+ value = __raw_readl(clk->mapping->base);
+ value = (value & ~0x3f) + idx;
+
+ __raw_writel(value, clk->mapping->base);
+
+ return 0;
+}
+
+static struct clk_ops dsiphy_clk_ops = {
+ .recalc = dsiphy_recalc,
+ .round_rate = dsiphy_round_rate,
+ .set_rate = dsiphy_set_rate,
+ .enable = dsiphy_enable,
+ .disable = dsiphy_disable,
+};
+
+static struct clk_mapping dsi0phy_clk_mapping = {
+ .phys = DSI0PHYCR,
+ .len = 4,
+};
+
+static struct clk_mapping dsi1phy_clk_mapping = {
+ .phys = DSI1PHYCR,
+ .len = 4,
+};
+
+static struct clk dsi0phy_clk = {
+ .ops = &dsiphy_clk_ops,
+ .parent = &div6_clks[DIV6_DSI0P], /* late install */
+ .mapping = &dsi0phy_clk_mapping,
+};
+
+static struct clk dsi1phy_clk = {
+ .ops = &dsiphy_clk_ops,
+ .parent = &div6_clks[DIV6_DSI1P], /* late install */
+ .mapping = &dsi1phy_clk_mapping,
+};
+
+static struct clk *late_main_clks[] = {
+ &dsi0phy_clk,
+ &dsi1phy_clk,
+};
+
enum { MSTP001,
MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
MSTP219,
CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
+ CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk),
+ CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk),
/* MSTP32 clocks */
CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
if (!ret)
ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+ for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
+ ret = clk_register(late_main_clks[k]);
+
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
if (!ret)
SHDMA_SLAVE_MMCIF_RX,
};
-/* PINT interrupts are located at Linux IRQ 768 and up */
-#define SH73A0_PINT0_IRQ(irq) ((irq) + 768)
-#define SH73A0_PINT1_IRQ(irq) ((irq) + 800)
+/* PINT interrupts are located at Linux IRQ 800 and up */
+#define SH73A0_PINT0_IRQ(irq) ((irq) + 800)
+#define SH73A0_PINT1_IRQ(irq) ((irq) + 832)
#endif /* __ASM_SH73A0_H__ */
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/sh_intc.h>
setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]);
n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k)));
+ WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n);
irq_set_chip_and_handler_name(n, &intca_gic_irq_chip,
handle_level_irq, "level");
set_irq_flags(n, IRQF_VALID); /* yuck */
FN_AUDATA3, 0, 0, 0 }
},
{ PINMUX_CFG_REG_VAR("IPSR4", 0xfffc0030, 32,
- 3, 1, 1, 1, 1, 1, 1, 3, 3, 1,
+ 3, 1, 1, 1, 1, 1, 1, 3, 3,
1, 1, 1, 1, 1, 1, 3, 3, 3, 2) {
/* IP4_31_29 [3] */
FN_DU1_DB0, FN_VI2_DATA4_VI2_B4, FN_SCL2_B, FN_SD3_DAT0,
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/gpio.h>
+#include <mach/irqs.h>
#include <mach/sh7372.h>
#define CPU_ALL_PORT(fn, pfx, sfx) \
{ },
};
+#define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5))
+#define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5))
+static struct pinmux_irq pinmux_irqs[] = {
+ PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0),
+};
+
static struct pinmux_info sh7372_pinmux_info = {
.name = "sh7372_pfc",
.reserved_id = PINMUX_RESERVED,
.gpio_data = pinmux_data,
.gpio_data_size = ARRAY_SIZE(pinmux_data),
+
+ .gpio_irq = pinmux_irqs,
+ .gpio_irq_size = ARRAY_SIZE(pinmux_irqs),
};
void sh7372_pinmux_init(void)
/* enable cache coherency */
modify_scu_cpu_psr(0, 3 << (cpu * 8));
- if (((__raw_readw(__io(PSTR)) >> (4 * cpu)) & 3) == 3)
+ if (((__raw_readl(__io(PSTR)) >> (4 * cpu)) & 3) == 3)
__raw_writel(1 << cpu, __io(WUPCR)); /* wake up */
else
__raw_writel(1 << cpu, __io(SRESCR)); /* reset */
.uartclk = 216000000,
}, {
/* serial port on mini-pcie */
- .membase = IO_ADDRESS(TEGRA_UARTD_BASE),
- .mapbase = TEGRA_UARTD_BASE,
- .irq = INT_UARTD,
+ .membase = IO_ADDRESS(TEGRA_UARTC_BASE),
+ .mapbase = TEGRA_UARTC_BASE,
+ .irq = INT_UARTC,
.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
.type = PORT_TEGRA,
.iotype = UPIO_MEM,
static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
/* name parent rate enabled */
{ "uarta", "pll_p", 216000000, true },
- { "uartd", "pll_p", 216000000, true },
+ { "uartc", "pll_p", 216000000, true },
{ "pll_p_out4", "pll_p", 24000000, true },
{ "usbd", "clk_m", 12000000, false },
/* SDCARD */
#define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5
#define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1
-#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3
+#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PV1
/* ULPI */
#define TEGRA_ULPI_RST TEGRA_GPIO_PV0
#include <linux/list.h>
-#if defined(CONFIG_TEGRA_SYSTEM_DMA)
-
-struct tegra_dma_req;
-struct tegra_dma_channel;
-
#define TEGRA_DMA_REQ_SEL_CNTR 0
#define TEGRA_DMA_REQ_SEL_I2S_2 1
#define TEGRA_DMA_REQ_SEL_I2S_1 2
#define TEGRA_DMA_REQ_SEL_OWR 25
#define TEGRA_DMA_REQ_SEL_INVALID 31
+#if defined(CONFIG_TEGRA_SYSTEM_DMA)
+
+struct tegra_dma_req;
+struct tegra_dma_channel;
+
enum tegra_dma_mode {
TEGRA_DMA_SHARED = 1,
TEGRA_DMA_MODE_CONTINOUS = 2,
menu "Versatile Express platform type"
depends on ARCH_VEXPRESS
+config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
+ bool
+ select ARM_ERRATA_720789
+ select ARM_ERRATA_751472
+ select PL310_ERRATA_753970 if CACHE_PL310
+ help
+ Provides common dependencies for Versatile Express platforms
+ based on Cortex-A5 and Cortex-A9 processors. In order to
+ build a working kernel, you must also enable relevant core
+ tile support or Flattened Device Tree based support options.
+
config ARCH_VEXPRESS_CA9X4
bool "Versatile Express Cortex-A9x4 tile"
+ select ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
+ select ARM_GIC
select CPU_V7
+ select HAVE_SMP
+ select MIGHT_HAVE_CACHE_L2X0
+
+config ARCH_VEXPRESS_DT
+ bool "Device Tree support for Versatile Express platforms"
+ select ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
select ARM_GIC
- select ARM_ERRATA_720789
- select ARM_ERRATA_751472
- select ARM_ERRATA_753970
+ select ARM_PATCH_PHYS_VIRT
+ select AUTO_ZRELADDR
+ select CPU_V7
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
+ select USE_OF
+ help
+ New Versatile Express platforms require Flattened Device Tree to
+ be passed to the kernel.
+
+ This option enables support for systems using Cortex processor based
+ ARM core and logic (FPGA) tiles on the Versatile Express motherboard,
+ for example:
+
+ - CoreTile Express A5x2 (V2P-CA5s)
+ - CoreTile Express A9x4 (V2P-CA9)
+ - CoreTile Express A15x2 (V2P-CA15)
+ - LogicTile Express 13MG (V2F-2XV6) with A5, A7, A9 or A15 SMMs
+ (Soft Macrocell Models)
+ - Versatile Express RTSMs (Models)
+
+ You must boot using a Flattened Device Tree in order to use these
+ platforms. The traditional (ATAGs) boot method is not usable on
+ these boards with this option.
+
+ If your bootloader supports Flattened Device Tree based booting,
+ say Y here.
endmenu
+# Those numbers are used only by the non-DT V2P-CA9 platform
+# The DT-enabled ones require CONFIG_AUTO_ZRELADDR=y
zreladdr-y += 0x60008000
params_phys-y := 0x60000100
initrd_phys-y := 0x60800000
+
+dtb-$(CONFIG_ARCH_VEXPRESS_DT) += vexpress-v2p-ca5s.dtb \
+ vexpress-v2p-ca9.dtb \
+ vexpress-v2p-ca15-tc1.dtb
-#define __MMIO_P2V(x) (((x) & 0xfffff) | (((x) & 0x0f000000) >> 4) | 0xf8000000)
-#define MMIO_P2V(x) ((void __iomem *)__MMIO_P2V(x))
+/* 2MB large area for motherboard's peripherals static mapping */
+#define V2M_PERIPH 0xf8000000
+
+/* Tile's peripherals static mappings should start here */
+#define V2T_PERIPH 0xf8200000
+
+void vexpress_dt_smp_map_io(void);
#include <plat/clcd.h>
-#define V2M_PA_CS7 0x10000000
-
static struct map_desc ct_ca9x4_io_desc[] __initdata = {
{
- .virtual = __MMIO_P2V(CT_CA9X4_MPIC),
- .pfn = __phys_to_pfn(CT_CA9X4_MPIC),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = __MMIO_P2V(CT_CA9X4_SP804_TIMER),
- .pfn = __phys_to_pfn(CT_CA9X4_SP804_TIMER),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = __MMIO_P2V(CT_CA9X4_L2CC),
- .pfn = __phys_to_pfn(CT_CA9X4_L2CC),
- .length = SZ_4K,
- .type = MT_DEVICE,
+ .virtual = V2T_PERIPH,
+ .pfn = __phys_to_pfn(CT_CA9X4_MPIC),
+ .length = SZ_8K,
+ .type = MT_DEVICE,
},
};
static void __init ct_ca9x4_map_io(void)
{
+ iotable_init(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
#ifdef CONFIG_LOCAL_TIMERS
- twd_base = MMIO_P2V(A9_MPCORE_TWD);
+ twd_base = ioremap(A9_MPCORE_TWD, SZ_32);
#endif
- iotable_init(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
}
static void __init ct_ca9x4_init_irq(void)
{
- gic_init(0, 29, MMIO_P2V(A9_MPCORE_GIC_DIST),
- MMIO_P2V(A9_MPCORE_GIC_CPU));
-}
-
-#if 0
-static void __init ct_ca9x4_timer_init(void)
-{
- writel(0, MMIO_P2V(CT_CA9X4_TIMER0) + TIMER_CTRL);
- writel(0, MMIO_P2V(CT_CA9X4_TIMER1) + TIMER_CTRL);
-
- sp804_clocksource_init(MMIO_P2V(CT_CA9X4_TIMER1), "ct-timer1");
- sp804_clockevents_init(MMIO_P2V(CT_CA9X4_TIMER0), IRQ_CT_CA9X4_TIMER0,
- "ct-timer0");
+ gic_init(0, 29, ioremap(A9_MPCORE_GIC_DIST, SZ_4K),
+ ioremap(A9_MPCORE_GIC_CPU, SZ_256));
}
-static struct sys_timer ct_ca9x4_timer = {
- .init = ct_ca9x4_timer_init,
-};
-#endif
-
static void ct_ca9x4_clcd_enable(struct clcd_fb *fb)
{
v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE_DB1, 0);
int i;
#ifdef CONFIG_CACHE_L2X0
- void __iomem *l2x0_base = MMIO_P2V(CT_CA9X4_L2CC);
+ void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K);
/* set RAM latencies to 1 cycle for this core tile. */
writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
}
#ifdef CONFIG_SMP
+static void *ct_ca9x4_scu_base __initdata;
+
static void __init ct_ca9x4_init_cpu_map(void)
{
- int i, ncores = scu_get_core_count(MMIO_P2V(A9_MPCORE_SCU));
+ int i, ncores;
+
+ ct_ca9x4_scu_base = ioremap(A9_MPCORE_SCU, SZ_128);
+ if (WARN_ON(!ct_ca9x4_scu_base))
+ return;
+
+ ncores = scu_get_core_count(ct_ca9x4_scu_base);
if (ncores > nr_cpu_ids) {
pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
static void __init ct_ca9x4_smp_enable(unsigned int max_cpus)
{
- scu_enable(MMIO_P2V(A9_MPCORE_SCU));
+ scu_enable(ct_ca9x4_scu_base);
}
#endif
#define CT_CA9X4_SYSWDT (0x1e007000)
#define CT_CA9X4_L2CC (0x1e00a000)
-#define CT_CA9X4_TIMER0 (CT_CA9X4_SP804_TIMER + 0x000)
-#define CT_CA9X4_TIMER1 (CT_CA9X4_SP804_TIMER + 0x020)
-
#define A9_MPCORE_SCU (CT_CA9X4_MPIC + 0x0000)
#define A9_MPCORE_GIC_CPU (CT_CA9X4_MPIC + 0x0100)
#define A9_MPCORE_GIT (CT_CA9X4_MPIC + 0x0200)
* published by the Free Software Foundation.
*/
-#define DEBUG_LL_UART_OFFSET 0x00009000
+#define DEBUG_LL_PHYS_BASE 0x10000000
+#define DEBUG_LL_UART_OFFSET 0x00009000
+
+#define DEBUG_LL_PHYS_BASE_RS1 0x1c000000
+#define DEBUG_LL_UART_OFFSET_RS1 0x00090000
+
+#define DEBUG_LL_VIRT_BASE 0xf8000000
.macro addruart,rp,rv,tmp
- mov \rp, #DEBUG_LL_UART_OFFSET
- orr \rv, \rp, #0xf8000000 @ virtual base
- orr \rp, \rp, #0x10000000 @ physical base
+
+ @ Make an educated guess regarding the memory map:
+ @ - the original A9 core tile, which has MPCore peripherals
+ @ located at 0x1e000000, should use UART at 0x10009000
+ @ - all other (RS1 complaint) tiles use UART mapped
+ @ at 0x1c090000
+ mrc p15, 4, \tmp, c15, c0, 0
+ cmp \tmp, #0x1e000000
+
+ @ Original memory map
+ moveq \rp, #DEBUG_LL_UART_OFFSET
+ orreq \rv, \rp, #DEBUG_LL_VIRT_BASE
+ orreq \rp, \rp, #DEBUG_LL_PHYS_BASE
+
+ @ RS1 memory map
+ movne \rp, #DEBUG_LL_UART_OFFSET_RS1
+ orrne \rv, \rp, #DEBUG_LL_VIRT_BASE
+ orrne \rp, \rp, #DEBUG_LL_PHYS_BASE_RS1
+
.endm
#include <asm/hardware/debug-pl01x.S>
#define IRQ_LOCALTIMER 29
#define IRQ_LOCALWDOG 30
-#define NR_IRQS 128
+#define NR_IRQS 256
#define V2M_CF (V2M_PA_CS7 + 0x0001a000)
#define V2M_CLCD (V2M_PA_CS7 + 0x0001f000)
-#define V2M_SYS_ID (V2M_SYSREGS + 0x000)
-#define V2M_SYS_SW (V2M_SYSREGS + 0x004)
-#define V2M_SYS_LED (V2M_SYSREGS + 0x008)
-#define V2M_SYS_100HZ (V2M_SYSREGS + 0x024)
-#define V2M_SYS_FLAGS (V2M_SYSREGS + 0x030)
-#define V2M_SYS_FLAGSSET (V2M_SYSREGS + 0x030)
-#define V2M_SYS_FLAGSCLR (V2M_SYSREGS + 0x034)
-#define V2M_SYS_NVFLAGS (V2M_SYSREGS + 0x038)
-#define V2M_SYS_NVFLAGSSET (V2M_SYSREGS + 0x038)
-#define V2M_SYS_NVFLAGSCLR (V2M_SYSREGS + 0x03c)
-#define V2M_SYS_MCI (V2M_SYSREGS + 0x048)
-#define V2M_SYS_FLASH (V2M_SYSREGS + 0x03c)
-#define V2M_SYS_CFGSW (V2M_SYSREGS + 0x058)
-#define V2M_SYS_24MHZ (V2M_SYSREGS + 0x05c)
-#define V2M_SYS_MISC (V2M_SYSREGS + 0x060)
-#define V2M_SYS_DMA (V2M_SYSREGS + 0x064)
-#define V2M_SYS_PROCID0 (V2M_SYSREGS + 0x084)
-#define V2M_SYS_PROCID1 (V2M_SYSREGS + 0x088)
-#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0)
-#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4)
-#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8)
-
-#define V2M_TIMER0 (V2M_TIMER01 + 0x000)
-#define V2M_TIMER1 (V2M_TIMER01 + 0x020)
-
-#define V2M_TIMER2 (V2M_TIMER23 + 0x000)
-#define V2M_TIMER3 (V2M_TIMER23 + 0x020)
+/*
+ * Offsets from SYSREGS base
+ */
+#define V2M_SYS_ID 0x000
+#define V2M_SYS_SW 0x004
+#define V2M_SYS_LED 0x008
+#define V2M_SYS_100HZ 0x024
+#define V2M_SYS_FLAGS 0x030
+#define V2M_SYS_FLAGSSET 0x030
+#define V2M_SYS_FLAGSCLR 0x034
+#define V2M_SYS_NVFLAGS 0x038
+#define V2M_SYS_NVFLAGSSET 0x038
+#define V2M_SYS_NVFLAGSCLR 0x03c
+#define V2M_SYS_MCI 0x048
+#define V2M_SYS_FLASH 0x03c
+#define V2M_SYS_CFGSW 0x058
+#define V2M_SYS_24MHZ 0x05c
+#define V2M_SYS_MISC 0x060
+#define V2M_SYS_DMA 0x064
+#define V2M_SYS_PROCID0 0x084
+#define V2M_SYS_PROCID1 0x088
+#define V2M_SYS_CFGDATA 0x0a0
+#define V2M_SYS_CFGCTRL 0x0a4
+#define V2M_SYS_CFGSTAT 0x0a8
/*
int v2m_cfg_write(u32 devfn, u32 data);
int v2m_cfg_read(u32 devfn, u32 *data);
+void v2m_flags_set(u32 data);
+
+/*
+ * Miscellaneous
+ */
+#define SYS_MISC_MASTERSITE (1 << 14)
+#define SYS_PROCIDx_HBI_MASK 0xfff
/*
* Core tile IDs
#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30))
#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18))
-#define get_uart_base() (0x10000000 + 0x00009000)
+#define UART_BASE 0x10009000
+#define UART_BASE_RS1 0x1c090000
+
+static unsigned long get_uart_base(void)
+{
+ unsigned long mpcore_periph;
+
+ /*
+ * Make an educated guess regarding the memory map:
+ * - the original A9 core tile, which has MPCore peripherals
+ * located at 0x1e000000, should use UART at 0x10009000
+ * - all other (RS1 complaint) tiles use UART mapped
+ * at 0x1c090000
+ */
+ asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (mpcore_periph));
+
+ if (mpcore_periph == 0x1e000000)
+ return UART_BASE;
+ else
+ return UART_BASE_RS1;
+}
/*
* This does not append a newline
#include <linux/errno.h>
#include <linux/smp.h>
#include <linux/io.h>
+#include <linux/of_fdt.h>
+
+#include <asm/smp_scu.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
#include <mach/motherboard.h>
-#define V2M_PA_CS7 0x10000000
#include "core.h"
extern void versatile_secondary_startup(void);
+#if defined(CONFIG_OF)
+
+static enum {
+ GENERIC_SCU,
+ CORTEX_A9_SCU,
+} vexpress_dt_scu __initdata = GENERIC_SCU;
+
+static struct map_desc vexpress_dt_cortex_a9_scu_map __initdata = {
+ .virtual = V2T_PERIPH,
+ /* .pfn set in vexpress_dt_init_cortex_a9_scu() */
+ .length = SZ_128,
+ .type = MT_DEVICE,
+};
+
+static void *vexpress_dt_cortex_a9_scu_base __initdata;
+
+const static char *vexpress_dt_cortex_a9_match[] __initconst = {
+ "arm,cortex-a5-scu",
+ "arm,cortex-a9-scu",
+ NULL
+};
+
+static int __init vexpress_dt_find_scu(unsigned long node,
+ const char *uname, int depth, void *data)
+{
+ if (of_flat_dt_match(node, vexpress_dt_cortex_a9_match)) {
+ phys_addr_t phys_addr;
+ __be32 *reg = of_get_flat_dt_prop(node, "reg", NULL);
+
+ if (WARN_ON(!reg))
+ return -EINVAL;
+
+ phys_addr = be32_to_cpup(reg);
+ vexpress_dt_scu = CORTEX_A9_SCU;
+
+ vexpress_dt_cortex_a9_scu_map.pfn = __phys_to_pfn(phys_addr);
+ iotable_init(&vexpress_dt_cortex_a9_scu_map, 1);
+ vexpress_dt_cortex_a9_scu_base = ioremap(phys_addr, SZ_256);
+ if (WARN_ON(!vexpress_dt_cortex_a9_scu_base))
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+void __init vexpress_dt_smp_map_io(void)
+{
+ if (initial_boot_params)
+ WARN_ON(of_scan_flat_dt(vexpress_dt_find_scu, NULL));
+}
+
+static int __init vexpress_dt_cpus_num(unsigned long node, const char *uname,
+ int depth, void *data)
+{
+ static int prev_depth = -1;
+ static int nr_cpus = -1;
+
+ if (prev_depth > depth && nr_cpus > 0)
+ return nr_cpus;
+
+ if (nr_cpus < 0 && strcmp(uname, "cpus") == 0)
+ nr_cpus = 0;
+
+ if (nr_cpus >= 0) {
+ const char *device_type = of_get_flat_dt_prop(node,
+ "device_type", NULL);
+
+ if (device_type && strcmp(device_type, "cpu") == 0)
+ nr_cpus++;
+ }
+
+ prev_depth = depth;
+
+ return 0;
+}
+
+static void __init vexpress_dt_smp_init_cpus(void)
+{
+ int ncores = 0, i;
+
+ switch (vexpress_dt_scu) {
+ case GENERIC_SCU:
+ ncores = of_scan_flat_dt(vexpress_dt_cpus_num, NULL);
+ break;
+ case CORTEX_A9_SCU:
+ ncores = scu_get_core_count(vexpress_dt_cortex_a9_scu_base);
+ break;
+ default:
+ WARN_ON(1);
+ break;
+ }
+
+ if (ncores < 2)
+ return;
+
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
+ }
+
+ for (i = 0; i < ncores; ++i)
+ set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
+}
+
+static void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus)
+{
+ int i;
+
+ switch (vexpress_dt_scu) {
+ case GENERIC_SCU:
+ for (i = 0; i < max_cpus; i++)
+ set_cpu_present(i, true);
+ break;
+ case CORTEX_A9_SCU:
+ scu_enable(vexpress_dt_cortex_a9_scu_base);
+ break;
+ default:
+ WARN_ON(1);
+ break;
+ }
+}
+
+#else
+
+static void __init vexpress_dt_smp_init_cpus(void)
+{
+ WARN_ON(1);
+}
+
+void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus)
+{
+ WARN_ON(1);
+}
+
+#endif
+
/*
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
void __init smp_init_cpus(void)
{
- ct_desc->init_cpu_map();
+ if (ct_desc)
+ ct_desc->init_cpu_map();
+ else
+ vexpress_dt_smp_init_cpus();
+
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
* Initialise the present map, which describes the set of CPUs
* actually populated at the present time.
*/
- ct_desc->smp_enable(max_cpus);
+ if (ct_desc)
+ ct_desc->smp_enable(max_cpus);
+ else
+ vexpress_dt_smp_prepare_cpus(max_cpus);
/*
* Write the address of secondary startup into the
* until it receives a soft interrupt, and then the
* secondary CPU branches to this address.
*/
- writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR));
- writel(virt_to_phys(versatile_secondary_startup),
- MMIO_P2V(V2M_SYS_FLAGSSET));
+ v2m_flags_set(virt_to_phys(versatile_secondary_startup));
}
#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/smsc911x.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/hardware/arm_timer.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
#include <asm/hardware/timer-sp.h>
#include <asm/hardware/sp810.h>
#include <asm/hardware/gic.h>
static struct map_desc v2m_io_desc[] __initdata = {
{
- .virtual = __MMIO_P2V(V2M_PA_CS7),
+ .virtual = V2M_PERIPH,
.pfn = __phys_to_pfn(V2M_PA_CS7),
.length = SZ_128K,
.type = MT_DEVICE,
},
};
-static void __init v2m_timer_init(void)
+static void __iomem *v2m_sysreg_base;
+
+static void __init v2m_sysctl_init(void __iomem *base)
{
u32 scctrl;
+ if (WARN_ON(!base))
+ return;
+
/* Select 1MHz TIMCLK as the reference clock for SP804 timers */
- scctrl = readl(MMIO_P2V(V2M_SYSCTL + SCCTRL));
+ scctrl = readl(base + SCCTRL);
scctrl |= SCCTRL_TIMEREN0SEL_TIMCLK;
scctrl |= SCCTRL_TIMEREN1SEL_TIMCLK;
- writel(scctrl, MMIO_P2V(V2M_SYSCTL + SCCTRL));
+ writel(scctrl, base + SCCTRL);
+}
+
+static void __init v2m_sp804_init(void __iomem *base, unsigned int irq)
+{
+ if (WARN_ON(!base || irq == NO_IRQ))
+ return;
+
+ writel(0, base + TIMER_1_BASE + TIMER_CTRL);
+ writel(0, base + TIMER_2_BASE + TIMER_CTRL);
- writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL);
- writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL);
+ sp804_clocksource_init(base + TIMER_2_BASE, "v2m-timer1");
+ sp804_clockevents_init(base + TIMER_1_BASE, irq, "v2m-timer0");
+}
- sp804_clocksource_init(MMIO_P2V(V2M_TIMER1), "v2m-timer1");
- sp804_clockevents_init(MMIO_P2V(V2M_TIMER0), IRQ_V2M_TIMER0,
- "v2m-timer0");
+static void __init v2m_timer_init(void)
+{
+ v2m_sysctl_init(ioremap(V2M_SYSCTL, SZ_4K));
+ v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0);
}
static struct sys_timer v2m_timer = {
devfn |= SYS_CFG_START | SYS_CFG_WRITE;
spin_lock(&v2m_cfg_lock);
- val = readl(MMIO_P2V(V2M_SYS_CFGSTAT));
- writel(val & ~SYS_CFG_COMPLETE, MMIO_P2V(V2M_SYS_CFGSTAT));
+ val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT);
+ writel(val & ~SYS_CFG_COMPLETE, v2m_sysreg_base + V2M_SYS_CFGSTAT);
- writel(data, MMIO_P2V(V2M_SYS_CFGDATA));
- writel(devfn, MMIO_P2V(V2M_SYS_CFGCTRL));
+ writel(data, v2m_sysreg_base + V2M_SYS_CFGDATA);
+ writel(devfn, v2m_sysreg_base + V2M_SYS_CFGCTRL);
do {
- val = readl(MMIO_P2V(V2M_SYS_CFGSTAT));
+ val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT);
} while (val == 0);
spin_unlock(&v2m_cfg_lock);
devfn |= SYS_CFG_START;
spin_lock(&v2m_cfg_lock);
- writel(0, MMIO_P2V(V2M_SYS_CFGSTAT));
- writel(devfn, MMIO_P2V(V2M_SYS_CFGCTRL));
+ writel(0, v2m_sysreg_base + V2M_SYS_CFGSTAT);
+ writel(devfn, v2m_sysreg_base + V2M_SYS_CFGCTRL);
mb();
do {
cpu_relax();
- val = readl(MMIO_P2V(V2M_SYS_CFGSTAT));
+ val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT);
} while (val == 0);
- *data = readl(MMIO_P2V(V2M_SYS_CFGDATA));
+ *data = readl(v2m_sysreg_base + V2M_SYS_CFGDATA);
spin_unlock(&v2m_cfg_lock);
return !!(val & SYS_CFG_ERR);
}
+void __init v2m_flags_set(u32 data)
+{
+ writel(~0, v2m_sysreg_base + V2M_SYS_FLAGSCLR);
+ writel(data, v2m_sysreg_base + V2M_SYS_FLAGSSET);
+}
+
static struct resource v2m_pcie_i2c_resource = {
.start = V2M_SERIAL_BUS_PCI,
static void v2m_flash_set_vpp(struct platform_device *pdev, int on)
{
- writel(on != 0, MMIO_P2V(V2M_SYS_FLASH));
+ writel(on != 0, v2m_sysreg_base + V2M_SYS_FLASH);
}
static struct physmap_flash_data v2m_flash_data = {
static unsigned int v2m_mmci_status(struct device *dev)
{
- return readl(MMIO_P2V(V2M_SYS_MCI)) & (1 << 0);
+ return readl(v2m_sysreg_base + V2M_SYS_MCI) & (1 << 0);
}
static struct mmci_platform_data v2m_mmci_data = {
{
ct_desc->init_early();
clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups));
- versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000);
+ versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000);
}
static void v2m_power_off(void)
u32 current_tile_id;
ct_desc = NULL;
- current_tile_id = readl(MMIO_P2V(V2M_SYS_PROCID0)) & V2M_CT_ID_MASK;
+ current_tile_id = readl(v2m_sysreg_base + V2M_SYS_PROCID0)
+ & V2M_CT_ID_MASK;
for (i = 0; i < ARRAY_SIZE(ct_descs) && !ct_desc; ++i)
if (ct_descs[i]->id == current_tile_id)
ct_desc = ct_descs[i];
if (!ct_desc)
- panic("vexpress: failed to populate core tile description "
- "for tile ID 0x%8x\n", current_tile_id);
+ panic("vexpress: this kernel does not support core tile ID 0x%08x when booting via ATAGs.\n"
+ "You may need a device tree blob or a different kernel to boot on this board.\n",
+ current_tile_id);
}
static void __init v2m_map_io(void)
{
iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc));
+ v2m_sysreg_base = ioremap(V2M_SYSREGS, SZ_4K);
v2m_populate_ct_desc();
ct_desc->map_io();
}
.init_machine = v2m_init,
.restart = v2m_restart,
MACHINE_END
+
+#if defined(CONFIG_ARCH_VEXPRESS_DT)
+
+static struct map_desc v2m_rs1_io_desc __initdata = {
+ .virtual = V2M_PERIPH,
+ .pfn = __phys_to_pfn(0x1c000000),
+ .length = SZ_2M,
+ .type = MT_DEVICE,
+};
+
+static int __init v2m_dt_scan_memory_map(unsigned long node, const char *uname,
+ int depth, void *data)
+{
+ const char **map = data;
+
+ if (strcmp(uname, "motherboard") != 0)
+ return 0;
+
+ *map = of_get_flat_dt_prop(node, "arm,v2m-memory-map", NULL);
+
+ return 1;
+}
+
+void __init v2m_dt_map_io(void)
+{
+ const char *map = NULL;
+
+ of_scan_flat_dt(v2m_dt_scan_memory_map, &map);
+
+ if (map && strcmp(map, "rs1") == 0)
+ iotable_init(&v2m_rs1_io_desc, 1);
+ else
+ iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc));
+
+#if defined(CONFIG_SMP)
+ vexpress_dt_smp_map_io();
+#endif
+}
+
+static struct clk_lookup v2m_dt_lookups[] = {
+ { /* AMBA bus clock */
+ .con_id = "apb_pclk",
+ .clk = &dummy_apb_pclk,
+ }, { /* SP804 timers */
+ .dev_id = "sp804",
+ .con_id = "v2m-timer0",
+ .clk = &v2m_sp804_clk,
+ }, { /* SP804 timers */
+ .dev_id = "sp804",
+ .con_id = "v2m-timer1",
+ .clk = &v2m_sp804_clk,
+ }, { /* PL180 MMCI */
+ .dev_id = "mb:mmci", /* 10005000.mmci */
+ .clk = &osc2_clk,
+ }, { /* PL050 KMI0 */
+ .dev_id = "10006000.kmi",
+ .clk = &osc2_clk,
+ }, { /* PL050 KMI1 */
+ .dev_id = "10007000.kmi",
+ .clk = &osc2_clk,
+ }, { /* PL011 UART0 */
+ .dev_id = "10009000.uart",
+ .clk = &osc2_clk,
+ }, { /* PL011 UART1 */
+ .dev_id = "1000a000.uart",
+ .clk = &osc2_clk,
+ }, { /* PL011 UART2 */
+ .dev_id = "1000b000.uart",
+ .clk = &osc2_clk,
+ }, { /* PL011 UART3 */
+ .dev_id = "1000c000.uart",
+ .clk = &osc2_clk,
+ }, { /* SP805 WDT */
+ .dev_id = "1000f000.wdt",
+ .clk = &v2m_ref_clk,
+ }, { /* PL111 CLCD */
+ .dev_id = "1001f000.clcd",
+ .clk = &osc1_clk,
+ },
+ /* RS1 memory map */
+ { /* PL180 MMCI */
+ .dev_id = "mb:mmci", /* 1c050000.mmci */
+ .clk = &osc2_clk,
+ }, { /* PL050 KMI0 */
+ .dev_id = "1c060000.kmi",
+ .clk = &osc2_clk,
+ }, { /* PL050 KMI1 */
+ .dev_id = "1c070000.kmi",
+ .clk = &osc2_clk,
+ }, { /* PL011 UART0 */
+ .dev_id = "1c090000.uart",
+ .clk = &osc2_clk,
+ }, { /* PL011 UART1 */
+ .dev_id = "1c0a0000.uart",
+ .clk = &osc2_clk,
+ }, { /* PL011 UART2 */
+ .dev_id = "1c0b0000.uart",
+ .clk = &osc2_clk,
+ }, { /* PL011 UART3 */
+ .dev_id = "1c0c0000.uart",
+ .clk = &osc2_clk,
+ }, { /* SP805 WDT */
+ .dev_id = "1c0f0000.wdt",
+ .clk = &v2m_ref_clk,
+ }, { /* PL111 CLCD */
+ .dev_id = "1c1f0000.clcd",
+ .clk = &osc1_clk,
+ },
+};
+
+void __init v2m_dt_init_early(void)
+{
+ struct device_node *node;
+ u32 dt_hbi;
+
+ node = of_find_compatible_node(NULL, NULL, "arm,vexpress-sysreg");
+ v2m_sysreg_base = of_iomap(node, 0);
+ if (WARN_ON(!v2m_sysreg_base))
+ return;
+
+ /* Confirm board type against DT property, if available */
+ if (of_property_read_u32(allnodes, "arm,hbi", &dt_hbi) == 0) {
+ u32 misc = readl(v2m_sysreg_base + V2M_SYS_MISC);
+ u32 id = readl(v2m_sysreg_base + (misc & SYS_MISC_MASTERSITE ?
+ V2M_SYS_PROCID1 : V2M_SYS_PROCID0));
+ u32 hbi = id & SYS_PROCIDx_HBI_MASK;
+
+ if (WARN_ON(dt_hbi != hbi))
+ pr_warning("vexpress: DT HBI (%x) is not matching "
+ "hardware (%x)!\n", dt_hbi, hbi);
+ }
+
+ clkdev_add_table(v2m_dt_lookups, ARRAY_SIZE(v2m_dt_lookups));
+ versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000);
+}
+
+static struct of_device_id vexpress_irq_match[] __initdata = {
+ { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+ {}
+};
+
+static void __init v2m_dt_init_irq(void)
+{
+ of_irq_init(vexpress_irq_match);
+}
+
+static void __init v2m_dt_timer_init(void)
+{
+ struct device_node *node;
+ const char *path;
+ int err;
+
+ node = of_find_compatible_node(NULL, NULL, "arm,sp810");
+ v2m_sysctl_init(of_iomap(node, 0));
+
+ err = of_property_read_string(of_aliases, "arm,v2m_timer", &path);
+ if (WARN_ON(err))
+ return;
+ node = of_find_node_by_path(path);
+ v2m_sp804_init(of_iomap(node, 0), irq_of_parse_and_map(node, 0));
+}
+
+static struct sys_timer v2m_dt_timer = {
+ .init = v2m_dt_timer_init,
+};
+
+static struct of_dev_auxdata v2m_dt_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("arm,vexpress-flash", V2M_NOR0, "physmap-flash",
+ &v2m_flash_data),
+ OF_DEV_AUXDATA("arm,primecell", V2M_MMCI, "mb:mmci", &v2m_mmci_data),
+ /* RS1 memory map */
+ OF_DEV_AUXDATA("arm,vexpress-flash", 0x08000000, "physmap-flash",
+ &v2m_flash_data),
+ OF_DEV_AUXDATA("arm,primecell", 0x1c050000, "mb:mmci", &v2m_mmci_data),
+ {}
+};
+
+static void __init v2m_dt_init(void)
+{
+ l2x0_of_init(0x00400000, 0xfe0fffff);
+ of_platform_populate(NULL, of_default_bus_match_table,
+ v2m_dt_auxdata_lookup, NULL);
+ pm_power_off = v2m_power_off;
+}
+
+const static char *v2m_dt_match[] __initconst = {
+ "arm,vexpress",
+ NULL,
+};
+
+DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express")
+ .dt_compat = v2m_dt_match,
+ .map_io = v2m_dt_map_io,
+ .init_early = v2m_dt_init_early,
+ .init_irq = v2m_dt_init_irq,
+ .timer = &v2m_dt_timer,
+ .init_machine = v2m_dt_init,
+ .handle_irq = gic_handle_irq,
+ .restart = v2m_restart,
+MACHINE_END
+
+#endif
config ARM_LPAE
bool "Support for the Large Physical Address Extension"
- depends on MMU && CPU_V7
+ depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \
+ !CPU_32v4 && !CPU_32v3
help
Say Y if you have an ARMv7 processor supporting the LPAE page
table format and you would like to access memory beyond the
cmp r1, #2 @ see what cache we have at this level
blt skip @ skip if no cache, or just i-cache
#ifdef CONFIG_PREEMPT
- save_and_disable_irqs r9 @ make cssr&csidr read atomic
+ save_and_disable_irqs_notrace r9 @ make cssr&csidr read atomic
#endif
mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
isb @ isb to sych the new cssr&csidr
unsigned long ckih1, unsigned long ckih2);
extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
+extern int mx27_clocks_init_dt(void);
extern int mx51_clocks_init_dt(void);
extern int mx53_clocks_init_dt(void);
extern int mx6q_clocks_init(void);
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
select HAVE_IDE
select NEED_MACH_MEMORY_H
help
select CLKDEV_LOOKUP
select GENERIC_IRQ_CHIP
select OMAP_DM_TIMER
+ select USE_OF
+ select PROC_DEVICETREE if PROC_FS
help
"Systems based on OMAP2, OMAP3 or OMAP4"
omap_vram_reserve_sdram_memblock();
omap_dsp_reserve_sdram_memblock();
omap_secure_ram_reserve_memblock();
+ omap_barrier_reserve_memblock();
}
void __init omap_init_consistent_dma_size(void)
#include <linux/types.h>
-#ifdef CONFIG_ARCH_OMAP2PLUS
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
extern int omap_secure_ram_reserve_memblock(void);
#else
static inline void omap_secure_ram_reserve_memblock(void)
{ }
#endif
+#ifdef CONFIG_OMAP4_ERRATA_I688
+extern int omap_barrier_reserve_memblock(void);
+#else
+static inline void omap_barrier_reserve_memblock(void)
+{ }
+#endif
#endif /* __OMAP_SECURE_H__ */
oh_cnt = of_property_count_strings(node, "ti,hwmods");
if (!oh_cnt || IS_ERR_VALUE(oh_cnt)) {
- dev_warn(&pdev->dev, "No 'hwmods' to build omap_device\n");
+ dev_dbg(&pdev->dev, "No 'hwmods' to build omap_device\n");
return -ENODEV;
}
/*****************************************************************************
* EHCI
****************************************************************************/
-static struct orion_ehci_data orion_ehci_data = {
- .phy_version = EHCI_PHY_NA,
-};
-
+static struct orion_ehci_data orion_ehci_data;
static u64 ehci_dmamask = DMA_BIT_MASK(32);
};
void __init orion_ehci_init(unsigned long mapbase,
- unsigned long irq)
+ unsigned long irq,
+ enum orion_ehci_phy_ver phy_version)
{
+ orion_ehci_data.phy_version = phy_version;
fill_resources(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1,
irq);
unsigned long irq_1);
void __init orion_ehci_init(unsigned long mapbase,
- unsigned long irq);
+ unsigned long irq,
+ enum orion_ehci_phy_ver phy_version);
void __init orion_ehci_1_init(unsigned long mapbase,
unsigned long irq);
gpio_mode |= GPIO_INPUT_OK;
if (*mpp_list & MPP_OUTPUT_MASK)
gpio_mode |= GPIO_OUTPUT_OK;
- if (sel != 0)
- gpio_mode = 0;
+
orion_gpio_set_valid(num, gpio_mode);
}
{
struct s3c2410_platform_i2c *npd;
- if (!pd)
+ if (!pd) {
pd = &default_i2c_data;
+ pd->bus_num = 0;
+ }
npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
&s3c_device_i2c0);
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/clockchips.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include <asm/smp_twd.h>
#include <asm/localtimer.h>
#include <mach/irqs.h>
+const static struct of_device_id twd_of_match[] __initconst = {
+ { .compatible = "arm,cortex-a9-twd-timer", },
+ { .compatible = "arm,cortex-a5-twd-timer", },
+ { .compatible = "arm,arm11mp-twd-timer", },
+ { },
+};
+
/*
* Setup the local clock events for a CPU.
*/
int __cpuinit local_timer_setup(struct clock_event_device *evt)
{
+#if defined(CONFIG_OF)
+ static int dt_node_probed;
+
+ /* Look for TWD node only once */
+ if (!dt_node_probed) {
+ struct device_node *node = of_find_matching_node(NULL,
+ twd_of_match);
+
+ if (node)
+ twd_base = of_iomap(node, 0);
+
+ dt_node_probed = 1;
+ }
+#endif
+ if (!twd_base)
+ return -ENXIO;
+
evt->irq = IRQ_LOCALTIMER;
twd_timer_setup(evt);
return 0;
endif
$(obj)/%.dtb: $(src)/dts/%.dts FORCE
- $(call cmd,dtc)
+ $(call if_changed_dep,dtc)
quiet_cmd_cp = CP $< $@$2
cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
| CF_PAGE_READABLE \
| CF_PAGE_WRITABLE \
| CF_PAGE_EXEC \
- | CF_PAGE_SYSTEM)
+ | CF_PAGE_SYSTEM \
+ | CF_PAGE_SHARED)
#define PAGE_COPY __pgprot(CF_PAGE_VALID \
| CF_PAGE_ACCESSED \
int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word)
{
- unsigned long flags, mmuar;
+ unsigned long flags, mmuar, mmutr;
struct mm_struct *mm;
pgd_t *pgd;
pmd_t *pmd;
if (!pte_dirty(*pte) && !KMAPAREA(mmuar))
set_pte(pte, pte_wrprotect(*pte));
- mmu_write(MMUTR, (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) |
- (((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK)
- >> CF_PAGE_MMUTR_SHIFT) | MMUTR_V);
+ mmutr = (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) | MMUTR_V;
+ if ((mmuar < TASK_UNMAPPED_BASE) || (mmuar >= TASK_SIZE))
+ mmutr |= (pte->pte & CF_PAGE_MMUTR_MASK) >> CF_PAGE_MMUTR_SHIFT;
+ mmu_write(MMUTR, mmutr);
mmu_write(MMUDR, (pte_val(*pte) & PAGE_MASK) |
((pte->pte) & CF_PAGE_MMUDR_MASK) | MMUDR_SZ_8KB | MMUDR_X);
movel %sp,%d1 /* get thread_info pointer */
andl #-THREAD_SIZE,%d1 /* at base of kernel stack */
movel %d1,%a0
- movel %a0@(TINFO_FLAGS),%d1 /* get thread_info->flags */
+ moveb %a0@(TINFO_FLAGS+3),%d1 /* thread_info->flags (low 8 bits) */
jne Lwork_to_do /* still work to do */
Lreturn:
btst #TIF_NEED_RESCHED,%d1
jne reschedule
- /* GERG: do we need something here for TRACEing?? */
-
Lsignal_return:
subql #4,%sp /* dummy return address */
SAVE_SWITCH_STACK
long syscallno; /* Syscall number (used by strace) */
long dummy; /* Cheap alignment fix */
};
-#endif /* __ASSEMBLY__ */
/* TODO: Rename this to REDZONE because that's what it is */
#define STACK_FRAME_OVERHEAD 128 /* size of minimum stack frame */
#define user_stack_pointer(regs) ((unsigned long)(regs)->sp)
#define profile_pc(regs) instruction_pointer(regs)
+static inline long regs_return_value(struct pt_regs *regs)
+{
+ return regs->gpr[11];
+}
+
+#endif /* __ASSEMBLY__ */
+
/*
* Offsets used by 'ptrace' system call interface.
*/
#include <linux/init_task.h>
#include <linux/mqueue.h>
+#include <linux/export.h>
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/kernel_stat.h>
+#include <linux/export.h>
#include <linux/irqflags.h>
*/
ret = -1L;
- /* Are these regs right??? */
- if (unlikely(current->audit_context))
- audit_syscall_entry(audit_arch(), regs->syscallno,
- regs->gpr[3], regs->gpr[4],
- regs->gpr[5], regs->gpr[6]);
+ audit_syscall_entry(audit_arch(), regs->syscallno,
+ regs->gpr[3], regs->gpr[4],
+ regs->gpr[5], regs->gpr[6]);
return ret ? : regs->syscallno;
}
{
int step;
- if (unlikely(current->audit_context))
- audit_syscall_exit(AUDITSC_RESULT(regs->gpr[11]),
- regs->gpr[11]);
+ audit_syscall_exit(regs);
step = test_thread_flag(TIF_SINGLESTEP);
if (step || test_thread_flag(TIF_SYSCALL_TRACE))
UTS_MACHINE := parisc64
CHECKFLAGS += -D__LP64__=1 -m64
WIDTH := 64
+
+# FIXME: if no default set, should really try to locate dynamically
+ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := hppa64-linux-gnu-
+endif
else # 32-bit
WIDTH :=
endif
CONFIG_SCANLOG=m
CONFIG_PPC_SMLPAR=y
CONFIG_DTL=y
-CONFIG_PPC_ISERIES=y
-CONFIG_VIODASD=y
-CONFIG_VIOCD=m
-CONFIG_VIOTAPE=m
CONFIG_PPC_MAPLE=y
CONFIG_PPC_PASEMI=y
CONFIG_PPC_PASEMI_IOMMU=y
CONFIG_MLX4_EN=m
CONFIG_QLGE=m
CONFIG_BE2NET=m
-CONFIG_ISERIES_VETH=m
CONFIG_PPP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
return pdev ? pci_name(pdev) : "<null>";
}
+static inline const char *eeh_driver_name(struct pci_dev *pdev)
+{
+ return (pdev && pdev->driver) ? pdev->driver->name : "<null>";
+}
+
#endif /* CONFIG_EEH */
#else /* CONFIG_PCI */
#ifndef __ASSEMBLY__
-#define instruction_pointer(regs) ((regs)->nip)
-#define user_stack_pointer(regs) ((regs)->gpr[1])
+#define GET_IP(regs) ((regs)->nip)
+#define GET_USP(regs) ((regs)->gpr[1])
+#define GET_FP(regs) (0)
+#define SET_FP(regs, val)
+
+#ifdef CONFIG_SMP
+extern unsigned long profile_pc(struct pt_regs *regs);
+#define profile_pc profile_pc
+#endif
+
+#include <asm-generic/ptrace.h>
+
#define kernel_stack_pointer(regs) ((regs)->gpr[1])
static inline int is_syscall_success(struct pt_regs *regs)
{
return -regs->gpr[3];
}
-#ifdef CONFIG_SMP
-extern unsigned long profile_pc(struct pt_regs *regs);
-#else
-#define profile_pc(regs) instruction_pointer(regs)
-#endif
-
#ifdef __powerpc64__
#define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1)
#else
stw r3,_TRAP(r1)
2: addi r3,r1,STACK_FRAME_OVERHEAD
mr r4,r9
- bl do_signal
+ bl do_notify_resume
REST_NVGPRS(r1)
b recheck
andi. r0,r4,_TIF_NEED_RESCHED
beq 1f
+ li r5,1
+ TRACE_AND_RESTORE_IRQ(r5);
bl .schedule
b .ret_from_except_lite
1: bl .save_nvgprs
+ li r5,1
+ TRACE_AND_RESTORE_IRQ(r5);
addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_signal
+ bl .do_notify_resume
b .ret_from_except
unrecov_restore:
program_check_common:
EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
bl .save_nvgprs
+ DISABLE_INTS
addi r3,r1,STACK_FRAME_OVERHEAD
- ENABLE_INTS
bl .program_check_exception
b .ret_from_except
static inline notrace void decrementer_check_overflow(void)
{
u64 now = get_tb_or_rtc();
- u64 *next_tb = &__get_cpu_var(decrementers_next_tb);
+ u64 *next_tb;
+
+ preempt_disable();
+ next_tb = &__get_cpu_var(decrementers_next_tb);
if (now >= *next_tb)
set_dec(1);
+ preempt_enable();
}
notrace void arch_local_irq_restore(unsigned long en)
{
unsigned long flags;
s64 left;
+ unsigned long val;
if (!event->hw.idx || !event->hw.sample_period)
return;
event->hw.state = 0;
left = local64_read(&event->hw.period_left);
- write_pmc(event->hw.idx, left);
+
+ val = 0;
+ if (left < 0x80000000L)
+ val = 0x80000000L - left;
+
+ write_pmc(event->hw.idx, val);
perf_event_update_userpage(event);
perf_pmu_enable(event->pmu);
*/
if (!__kernel_text_address(pc) ||
__get_user(instr, (unsigned int __user *)pc)) {
- printk("XXXXXXXX ");
+ printk(KERN_CONT "XXXXXXXX ");
} else {
if (regs->nip == pc)
- printk("<%08x> ", instr);
+ printk(KERN_CONT "<%08x> ", instr);
else
- printk("%08x ", instr);
+ printk(KERN_CONT "%08x ", instr);
}
pc += sizeof(int);
int cpu;
slb_set_size(SLB_MIN_SIZE);
- stop_topology_update();
printk(KERN_DEBUG "calling ibm,suspend-me on cpu %i\n", smp_processor_id());
while (rc == H_MULTI_THREADS_ACTIVE && !atomic_read(&data->done) &&
rc = atomic_read(&data->error);
atomic_set(&data->error, rc);
- start_topology_update();
pSeries_coalesce_init();
if (wake_when_done) {
atomic_set(&data.error, 0);
data.token = rtas_token("ibm,suspend-me");
data.complete = &done;
+ stop_topology_update();
/* Call function on all CPUs. One of us will make the
* rtas call
if (atomic_read(&data.error) != 0)
printk(KERN_ERR "Error doing global join\n");
+ start_topology_update();
+
return atomic_read(&data.error);
}
#else /* CONFIG_PPC_PSERIES */
#include <linux/tracehook.h>
#include <linux/signal.h>
+#include <linux/key.h>
#include <asm/hw_breakpoint.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
}
}
-static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
+static int do_signal(struct pt_regs *regs)
{
+ sigset_t *oldset;
siginfo_t info;
int signr;
struct k_sigaction ka;
if (current_thread_info()->local_flags & _TLF_RESTORE_SIGMASK)
oldset = ¤t->saved_sigmask;
- else if (!oldset)
+ else
oldset = ¤t->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
return ret;
}
-void do_signal(struct pt_regs *regs, unsigned long thread_info_flags)
+void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags)
{
if (thread_info_flags & _TIF_SIGPENDING)
- do_signal_pending(NULL, regs);
+ do_signal(regs);
if (thread_info_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
}
}
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-extern void do_signal(struct pt_regs *regs, unsigned long thread_info_flags);
+extern void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags);
extern void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
size_t frame_size, int is_32);
static unsigned int pnv_get_one_msi(struct pnv_phb *phb)
{
- unsigned int id;
+ unsigned long flags;
+ unsigned int id, rc;
+
+ spin_lock_irqsave(&phb->lock, flags);
- spin_lock(&phb->lock);
id = find_next_zero_bit(phb->msi_map, phb->msi_count, phb->msi_next);
if (id >= phb->msi_count && phb->msi_next)
id = find_next_zero_bit(phb->msi_map, phb->msi_count, 0);
if (id >= phb->msi_count) {
- spin_unlock(&phb->lock);
- return 0;
+ rc = 0;
+ goto out;
}
__set_bit(id, phb->msi_map);
- spin_unlock(&phb->lock);
- return id + phb->msi_base;
+ rc = id + phb->msi_base;
+out:
+ spin_unlock_irqrestore(&phb->lock, flags);
+ return rc;
}
static void pnv_put_msi(struct pnv_phb *phb, unsigned int hwirq)
{
+ unsigned long flags;
unsigned int id;
if (WARN_ON(hwirq < phb->msi_base ||
hwirq >= (phb->msi_base + phb->msi_count)))
return;
id = hwirq - phb->msi_base;
- spin_lock(&phb->lock);
+
+ spin_lock_irqsave(&phb->lock, flags);
__clear_bit(id, phb->msi_map);
- spin_unlock(&phb->lock);
+ spin_unlock_irqrestore(&phb->lock, flags);
}
static int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
printk (KERN_ERR "EEH: %d reads ignored for recovering device at "
"location=%s driver=%s pci addr=%s\n",
pdn->eeh_check_count, location,
- dev->driver->name, eeh_pci_name(dev));
+ eeh_driver_name(dev), eeh_pci_name(dev));
printk (KERN_ERR "EEH: Might be infinite loop in %s driver\n",
- dev->driver->name);
+ eeh_driver_name(dev));
dump_stack();
}
goto dn_unlock;
#include <asm/machdep.h>
#include <asm/mmu.h>
#include <asm/rtas.h>
+#include <asm/topology.h>
static u64 stream_id;
static struct device suspend_dev;
ssleep(1);
} while (rc == -EAGAIN);
- if (!rc)
+ if (!rc) {
+ stop_topology_update();
rc = pm_suspend(PM_SUSPEND_MEM);
+ start_topology_update();
+ }
stream_id = 0;
* For the moment only implement delivery to all cpus or one cpu.
* Get current irq_server for the given irq
*/
- ret = cache_hwirq_map(ics, d->irq, cpumask);
+ ret = cache_hwirq_map(ics, hw_irq, cpumask);
if (ret == -1) {
char cpulist[128];
cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask);
static int __init smp_a2_probe(void)
{
- return cpus_weight(cpu_possible_map);
+ return num_possible_cpus();
}
static struct smp_ops_t a2_smp_ops = {
#define DUMP_REG(x) \
pr_debug("%-30s : 0x%016llx\n", #x, in_be64(hose->cfg_data + x))
-#ifdef CONFIG_WSP_DD1_WORKAROUND_BAD_PCIE_CLASS
- /* WSP DD1 has a bogus class code by default in the PCI-E
- * root complex's built-in P2P bridge */
+ /*
+ * Some WSP variants has a bogus class code by default in the PCI-E
+ * root complex's built-in P2P bridge
+ */
val = in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1);
pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", val);
out_be64(hose->cfg_data + PCIE_REG_SYS_CFG1,
(val & ~PCIE_REG_SYS_CFG1_CLASS_CODE) | (PCI_CLASS_BRIDGE_PCI << 8));
pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1));
-#endif /* CONFIG_WSP_DD1_WORKAROUND_BAD_PCIE_CLASS */
#ifdef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
/* XXX Disable TCE caching, it doesn't work on DD1 */
void fsl_pcibios_fixup_bus(struct pci_bus *bus)
{
struct pci_controller *hose = pci_bus_to_host(bus);
- int i;
-
- if ((bus->parent == hose->bus) &&
- ((fsl_pcie_bus_fixup &&
- early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) ||
- (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK)))
- {
- for (i = 0; i < 4; ++i) {
+ int i, is_pcie = 0, no_link;
+
+ /* The root complex bridge comes up with bogus resources,
+ * we copy the PHB ones in.
+ *
+ * With the current generic PCI code, the PHB bus no longer
+ * has bus->resource[0..4] set, so things are a bit more
+ * tricky.
+ */
+
+ if (fsl_pcie_bus_fixup)
+ is_pcie = early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP);
+ no_link = !!(hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK);
+
+ if (bus->parent == hose->bus && (is_pcie || no_link)) {
+ for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; ++i) {
struct resource *res = bus->resource[i];
- struct resource *par = bus->parent->resource[i];
- if (res) {
- res->start = 0;
- res->end = 0;
- res->flags = 0;
- }
- if (res && par) {
- res->start = par->start;
- res->end = par->end;
- res->flags = par->flags;
- }
+ struct resource *par;
+
+ if (!res)
+ continue;
+ if (i == 0)
+ par = &hose->io_resource;
+ else if (i < 4)
+ par = &hose->mem_resources[i-1];
+ else par = NULL;
+
+ res->start = par ? par->start : 0;
+ res->end = par ? par->end : 0;
+ res->flags = par ? par->flags : 0;
}
}
}
config SYSVIPC_COMPAT
def_bool y if COMPAT && SYSVIPC
+config KEYS_COMPAT
+ def_bool y if COMPAT && KEYS
+
config AUDIT_ARCH
def_bool y
return is_32bit_task();
}
-#else
-
-static inline int is_compat_task(void)
-{
- return 0;
-}
-
#endif
static inline void __user *arch_compat_alloc_user_space(long len)
ENTRY(sys32_poll_wrapper)
llgtr %r2,%r2 # struct pollfd *
llgfr %r3,%r3 # unsigned int
- lgfr %r4,%r4 # long
+ lgfr %r4,%r4 # int
jg sys_poll # branch to system call
ENTRY(sys32_setresgid16_wrapper)
#include <linux/module.h>
#include <linux/gfp.h>
#include <linux/slab.h>
-#include <linux/crash_dump.h>
#include <linux/bootmem.h>
#include <linux/elf.h>
#include <asm/ipl.h>
#include <asm/irq.h>
#include <asm/timer.h>
#include <asm/nmi.h>
-#include <asm/compat.h>
#include <asm/smp.h>
#include "entry.h"
if (test_thread_flag(TIF_MCCK_PENDING)) {
local_mcck_enable();
local_irq_enable();
- s390_handle_mcck();
return;
}
trace_hardirqs_on();
for (;;) {
tick_nohz_idle_enter();
rcu_idle_enter();
- while (!need_resched())
+ while (!need_resched() && !test_thread_flag(TIF_MCCK_PENDING))
default_idle();
rcu_idle_exit();
tick_nohz_idle_exit();
+ if (test_thread_flag(TIF_MCCK_PENDING))
+ s390_handle_mcck();
preempt_enable_no_resched();
schedule();
preempt_disable();
#include <linux/regset.h>
#include <linux/tracehook.h>
#include <linux/seccomp.h>
+#include <linux/compat.h>
#include <trace/syscall.h>
-#include <asm/compat.h>
#include <asm/segment.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <linux/kexec.h>
#include <linux/crash_dump.h>
#include <linux/memory.h>
+#include <linux/compat.h>
#include <asm/ipl.h>
#include <asm/uaccess.h>
#include <asm/ptrace.h>
#include <asm/sections.h>
#include <asm/ebcdic.h>
-#include <asm/compat.h>
#include <asm/kvm_virtio.h>
#include <asm/diag.h>
#include <asm/ucontext.h>
#include <asm/uaccess.h>
#include <asm/lowcore.h>
-#include <asm/compat.h>
#include "entry.h"
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
static int s390_next_ktime(ktime_t expires,
struct clock_event_device *evt)
{
+ struct timespec ts;
u64 nsecs;
- nsecs = ktime_to_ns(ktime_sub(expires, ktime_get_monotonic_offset()));
+ ts.tv_sec = ts.tv_nsec = 0;
+ monotonic_to_bootbased(&ts);
+ nsecs = ktime_to_ns(ktime_add(timespec_to_ktime(ts), expires));
do_div(nsecs, 125);
- S390_lowcore.clock_comparator = TOD_UNIX_EPOCH + (nsecs << 9);
+ S390_lowcore.clock_comparator = sched_clock_base_cc + (nsecs << 9);
set_clock_comparator(S390_lowcore.clock_comparator);
return 0;
}
#include <asm/pgtable.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
-#include <asm/compat.h>
#include "../kernel/entry.h"
#ifndef CONFIG_64BIT
#ifdef CONFIG_MEMORY_HOTPLUG
int arch_add_memory(int nid, u64 start, u64 size)
{
- struct pglist_data *pgdat;
+ unsigned long zone_start_pfn, zone_end_pfn, nr_pages;
+ unsigned long start_pfn = PFN_DOWN(start);
+ unsigned long size_pages = PFN_DOWN(size);
struct zone *zone;
int rc;
- pgdat = NODE_DATA(nid);
- zone = pgdat->node_zones + ZONE_MOVABLE;
rc = vmem_add_mapping(start, size);
if (rc)
return rc;
- rc = __add_pages(nid, zone, PFN_DOWN(start), PFN_DOWN(size));
+ for_each_zone(zone) {
+ if (zone_idx(zone) != ZONE_MOVABLE) {
+ /* Add range within existing zone limits */
+ zone_start_pfn = zone->zone_start_pfn;
+ zone_end_pfn = zone->zone_start_pfn +
+ zone->spanned_pages;
+ } else {
+ /* Add remaining range to ZONE_MOVABLE */
+ zone_start_pfn = start_pfn;
+ zone_end_pfn = start_pfn + size_pages;
+ }
+ if (start_pfn < zone_start_pfn || start_pfn >= zone_end_pfn)
+ continue;
+ nr_pages = (start_pfn + size_pages > zone_end_pfn) ?
+ zone_end_pfn - start_pfn : size_pages;
+ rc = __add_pages(nid, zone, start_pfn, nr_pages);
+ if (rc)
+ break;
+ start_pfn += nr_pages;
+ size_pages -= nr_pages;
+ if (!size_pages)
+ break;
+ }
if (rc)
vmem_remove_mapping(start, size);
return rc;
#include <linux/mman.h>
#include <linux/module.h>
#include <linux/random.h>
+#include <linux/compat.h>
#include <asm/pgalloc.h>
-#include <asm/compat.h>
static unsigned long stack_maxrandom_size(void)
{
page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
mp = (struct gmap_pgtable *) page->index;
BUG_ON(!list_empty(&mp->mapper));
- pgtable_page_ctor(page);
+ pgtable_page_dtor(page);
atomic_set(&page->_mapcount, -1);
kfree(mp);
__free_page(page);
.start = 0xfee00800,
.end = 0xfee00fff,
.flags = IORESOURCE_MEM,
+ }, {
+ /* TSU */
+ .start = 0xfee01800,
+ .end = 0xfee01fff,
+ .flags = IORESOURCE_MEM,
}, {
.start = 316,
.end = 316,
},
};
-static struct sh_mmcif_dma sh7757lcr_mmcif_dma = {
- .chan_priv_tx = {
- .slave_id = SHDMA_SLAVE_MMCIF_TX,
- },
- .chan_priv_rx = {
- .slave_id = SHDMA_SLAVE_MMCIF_RX,
- }
-};
-
static struct sh_mmcif_plat_data sh_mmcif_plat = {
- .dma = &sh7757lcr_mmcif_dma,
.sup_pclk = 0x0f,
- .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
+ MMC_CAP_NONREMOVABLE,
.ocr = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
+ .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct platform_device sh_mmcif_device = {
#include <linux/i2c.h>
#include <linux/smsc911x.h>
#include <linux/gpio.h>
+#include <linux/videodev2.h>
#include <media/ov772x.h>
#include <media/soc_camera.h>
#include <media/soc_camera_platform.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
#include <linux/sh_eth.h>
+#include <linux/videodev2.h>
#include <video/sh_mobile_lcdc.h>
#include <sound/sh_fsi.h>
#include <media/sh_mobile_ceu.h>
+#include <media/soc_camera.h>
#include <media/tw9910.h>
#include <media/mt9t112.h>
#include <asm/heartbeat.h>
#include <linux/input/sh_keysc.h>
#include <linux/i2c.h>
#include <linux/usb/r8a66597.h>
+#include <linux/videodev2.h>
#include <media/rj54n1cb0c.h>
#include <media/soc_camera.h>
#include <media/sh_mobile_ceu.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/gpio.h>
+#include <linux/videodev2.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
#include <media/ov772x.h>
+#include <media/soc_camera.h>
#include <media/tw9910.h>
#include <asm/clock.h>
#include <asm/machvec.h>
#include <linux/input/sh_keysc.h>
#include <linux/usb/r8a66597.h>
#include <linux/sh_eth.h>
+#include <linux/videodev2.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
#include <sound/sh_fsi.h>
{ SH4_PCIINT_MLCK, "master lock error" },
{ SH4_PCIINT_TABT, "target-target abort" },
{ SH4_PCIINT_TRET, "target retry time out" },
- { SH4_PCIINT_MFDE, "master function disable erorr" },
+ { SH4_PCIINT_MFDE, "master function disable error" },
{ SH4_PCIINT_PRTY, "address parity error" },
{ SH4_PCIINT_SERR, "SERR" },
{ SH4_PCIINT_TWDP, "data parity error for target write" },
*
* This file is released under the GPLv2
*/
+#ifndef __ASM_SH_DEVICE_H
+#define __ASM_SH_DEVICE_H
-struct dev_archdata {
-};
+#include <asm-generic/device.h>
struct platform_device;
/* allocate contiguous memory chunk and fill in struct resource */
void plat_early_device_setup(void);
-struct pdev_archdata {
-};
+#endif /* __ASM_SH_DEVICE_H */
CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[HWBLK_CEU1]),
CLKDEV_CON_ID("beu1", &mstp_clks[HWBLK_BEU1]),
CLKDEV_CON_ID("2ddmac0", &mstp_clks[HWBLK_2DDMAC]),
- CLKDEV_CON_ID("spu0", &mstp_clks[HWBLK_SPU]),
+ CLKDEV_DEV_ID("sh_fsi.0", &mstp_clks[HWBLK_SPU]),
CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]),
CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]),
CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU0]),
[0] = {
.start = 0xfe002000,
.end = 0xfe0020ff,
- .flags = IORESOURCE_MEM,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
},
[1] = {
.start = 86,
.resource = spi0_resources,
};
+static struct resource spi1_resources[] = {
+ {
+ .start = 0xffd8ee70,
+ .end = 0xffd8eeff,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+ },
+ {
+ .start = 54,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device spi1_device = {
+ .name = "sh_spi",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(spi1_resources),
+ .resource = spi1_resources,
+};
+
static struct resource usb_ehci_resources[] = {
[0] = {
.start = 0xfe4f1000,
&dma2_device,
&dma3_device,
&spi0_device,
+ &spi1_device,
&usb_ehci_device,
&usb_ohci_device,
};
mp_ops->prepare_cpus(max_cpus);
#ifndef CONFIG_HOTPLUG_CPU
- init_cpu_present(&cpu_possible_map);
+ init_cpu_present(cpu_possible_mask);
#endif
}
* Presently all SH-X3 SMP cores are multi-cores, so just keep it
* simple until we have a method for determining topology..
*/
- return cpu_possible_map;
+ return *cpu_possible_mask;
}
const struct cpumask *cpu_coregroup_mask(unsigned int cpu)
#define MAX_OCACHE_PAGES 32
#define MAX_ICACHE_PAGES 32
+#ifdef CONFIG_CACHE_WRITEBACK
static void sh2a_flush_oc_line(unsigned long v, int way)
{
unsigned long addr = (v & 0x000007f0) | (way << 11);
__raw_writel(data, CACHE_OC_ADDRESS_ARRAY | addr);
}
}
+#endif
static void sh2a_invalidate_line(unsigned long cache_addr, unsigned long v)
{
extern void mxcsr_feature_mask_init(void);
extern int init_fpu(struct task_struct *child);
extern void math_state_restore(void);
-extern void __math_state_restore(void);
extern int dump_fpu(struct pt_regs *, struct user_i387_struct *);
+DECLARE_PER_CPU(struct task_struct *, fpu_owner_task);
+
extern user_regset_active_fn fpregs_active, xfpregs_active;
extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get,
xstateregs_get;
#endif /* CONFIG_X86_64 */
-/* We need a safe address that is cheap to find and that is already
- in L1 during context switch. The best choices are unfortunately
- different for UP and SMP */
-#ifdef CONFIG_SMP
-#define safe_address (__per_cpu_offset[0])
-#else
-#define safe_address (__get_cpu_var(kernel_cpustat).cpustat[CPUTIME_USER])
-#endif
-
/*
- * These must be called with preempt disabled
+ * These must be called with preempt disabled. Returns
+ * 'true' if the FPU state is still intact.
*/
-static inline void fpu_save_init(struct fpu *fpu)
+static inline int fpu_save_init(struct fpu *fpu)
{
if (use_xsave()) {
fpu_xsave(fpu);
* xsave header may indicate the init state of the FP.
*/
if (!(fpu->state->xsave.xsave_hdr.xstate_bv & XSTATE_FP))
- return;
+ return 1;
} else if (use_fxsr()) {
fpu_fxsave(fpu);
} else {
asm volatile("fnsave %[fx]; fwait"
: [fx] "=m" (fpu->state->fsave));
- return;
+ return 0;
}
- if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES))
+ /*
+ * If exceptions are pending, we need to clear them so
+ * that we don't randomly get exceptions later.
+ *
+ * FIXME! Is this perhaps only true for the old-style
+ * irq13 case? Maybe we could leave the x87 state
+ * intact otherwise?
+ */
+ if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES)) {
asm volatile("fnclex");
-
- /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
- is pending. Clear the x87 state here by setting it to fixed
- values. safe_address is a random variable that should be in L1 */
- alternative_input(
- ASM_NOP8 ASM_NOP2,
- "emms\n\t" /* clear stack tags */
- "fildl %P[addr]", /* set F?P to defined value */
- X86_FEATURE_FXSAVE_LEAK,
- [addr] "m" (safe_address));
+ return 0;
+ }
+ return 1;
}
-static inline void __save_init_fpu(struct task_struct *tsk)
+static inline int __save_init_fpu(struct task_struct *tsk)
{
- fpu_save_init(&tsk->thread.fpu);
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
+ return fpu_save_init(&tsk->thread.fpu);
}
static inline int fpu_fxrstor_checking(struct fpu *fpu)
static inline int restore_fpu_checking(struct task_struct *tsk)
{
+ /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
+ is pending. Clear the x87 state here by setting it to fixed
+ values. "m" is a random variable that should be in L1 */
+ alternative_input(
+ ASM_NOP8 ASM_NOP2,
+ "emms\n\t" /* clear stack tags */
+ "fildl %P[addr]", /* set F?P to defined value */
+ X86_FEATURE_FXSAVE_LEAK,
+ [addr] "m" (tsk->thread.fpu.has_fpu));
+
return fpu_restore_checking(&tsk->thread.fpu);
}
/*
- * Signal frame handlers...
+ * Software FPU state helpers. Careful: these need to
+ * be preemption protection *and* they need to be
+ * properly paired with the CR0.TS changes!
*/
-extern int save_i387_xstate(void __user *buf);
-extern int restore_i387_xstate(void __user *buf);
+static inline int __thread_has_fpu(struct task_struct *tsk)
+{
+ return tsk->thread.fpu.has_fpu;
+}
-static inline void __unlazy_fpu(struct task_struct *tsk)
+/* Must be paired with an 'stts' after! */
+static inline void __thread_clear_has_fpu(struct task_struct *tsk)
{
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
- __save_init_fpu(tsk);
- stts();
- } else
- tsk->fpu_counter = 0;
+ tsk->thread.fpu.has_fpu = 0;
+ percpu_write(fpu_owner_task, NULL);
+}
+
+/* Must be paired with a 'clts' before! */
+static inline void __thread_set_has_fpu(struct task_struct *tsk)
+{
+ tsk->thread.fpu.has_fpu = 1;
+ percpu_write(fpu_owner_task, tsk);
+}
+
+/*
+ * Encapsulate the CR0.TS handling together with the
+ * software flag.
+ *
+ * These generally need preemption protection to work,
+ * do try to avoid using these on their own.
+ */
+static inline void __thread_fpu_end(struct task_struct *tsk)
+{
+ __thread_clear_has_fpu(tsk);
+ stts();
}
+static inline void __thread_fpu_begin(struct task_struct *tsk)
+{
+ clts();
+ __thread_set_has_fpu(tsk);
+}
+
+/*
+ * FPU state switching for scheduling.
+ *
+ * This is a two-stage process:
+ *
+ * - switch_fpu_prepare() saves the old state and
+ * sets the new state of the CR0.TS bit. This is
+ * done within the context of the old process.
+ *
+ * - switch_fpu_finish() restores the new state as
+ * necessary.
+ */
+typedef struct { int preload; } fpu_switch_t;
+
+/*
+ * FIXME! We could do a totally lazy restore, but we need to
+ * add a per-cpu "this was the task that last touched the FPU
+ * on this CPU" variable, and the task needs to have a "I last
+ * touched the FPU on this CPU" and check them.
+ *
+ * We don't do that yet, so "fpu_lazy_restore()" always returns
+ * false, but some day..
+ */
+static inline int fpu_lazy_restore(struct task_struct *new, unsigned int cpu)
+{
+ return new == percpu_read_stable(fpu_owner_task) &&
+ cpu == new->thread.fpu.last_cpu;
+}
+
+static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct task_struct *new, int cpu)
+{
+ fpu_switch_t fpu;
+
+ fpu.preload = tsk_used_math(new) && new->fpu_counter > 5;
+ if (__thread_has_fpu(old)) {
+ if (!__save_init_fpu(old))
+ cpu = ~0;
+ old->thread.fpu.last_cpu = cpu;
+ old->thread.fpu.has_fpu = 0; /* But leave fpu_owner_task! */
+
+ /* Don't change CR0.TS if we just switch! */
+ if (fpu.preload) {
+ new->fpu_counter++;
+ __thread_set_has_fpu(new);
+ prefetch(new->thread.fpu.state);
+ } else
+ stts();
+ } else {
+ old->fpu_counter = 0;
+ old->thread.fpu.last_cpu = ~0;
+ if (fpu.preload) {
+ new->fpu_counter++;
+ if (fpu_lazy_restore(new, cpu))
+ fpu.preload = 0;
+ else
+ prefetch(new->thread.fpu.state);
+ __thread_fpu_begin(new);
+ }
+ }
+ return fpu;
+}
+
+/*
+ * By the time this gets called, we've already cleared CR0.TS and
+ * given the process the FPU if we are going to preload the FPU
+ * state - all we need to do is to conditionally restore the register
+ * state itself.
+ */
+static inline void switch_fpu_finish(struct task_struct *new, fpu_switch_t fpu)
+{
+ if (fpu.preload) {
+ if (unlikely(restore_fpu_checking(new)))
+ __thread_fpu_end(new);
+ }
+}
+
+/*
+ * Signal frame handlers...
+ */
+extern int save_i387_xstate(void __user *buf);
+extern int restore_i387_xstate(void __user *buf);
+
static inline void __clear_fpu(struct task_struct *tsk)
{
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
+ if (__thread_has_fpu(tsk)) {
/* Ignore delayed exceptions from user space */
asm volatile("1: fwait\n"
"2:\n"
_ASM_EXTABLE(1b, 2b));
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
- stts();
+ __thread_fpu_end(tsk);
}
}
* Were we in an interrupt that interrupted kernel mode?
*
* We can do a kernel_fpu_begin/end() pair *ONLY* if that
- * pair does nothing at all: TS_USEDFPU must be clear (so
+ * pair does nothing at all: the thread must not have fpu (so
* that we don't try to save the FPU state), and TS must
* be set (so that the clts/stts pair does nothing that is
* visible in the interrupted kernel thread).
*/
static inline bool interrupted_kernel_fpu_idle(void)
{
- return !(current_thread_info()->status & TS_USEDFPU) &&
+ return !__thread_has_fpu(current) &&
(read_cr0() & X86_CR0_TS);
}
static inline void kernel_fpu_begin(void)
{
- struct thread_info *me = current_thread_info();
+ struct task_struct *me = current;
WARN_ON_ONCE(!irq_fpu_usable());
preempt_disable();
- if (me->status & TS_USEDFPU)
- __save_init_fpu(me->task);
- else
+ if (__thread_has_fpu(me)) {
+ __save_init_fpu(me);
+ __thread_clear_has_fpu(me);
+ /* We do 'stts()' in kernel_fpu_end() */
+ } else {
+ percpu_write(fpu_owner_task, NULL);
clts();
+ }
}
static inline void kernel_fpu_end(void)
stts();
}
+/*
+ * The question "does this thread have fpu access?"
+ * is slightly racy, since preemption could come in
+ * and revoke it immediately after the test.
+ *
+ * However, even in that very unlikely scenario,
+ * we can just assume we have FPU access - typically
+ * to save the FP state - we'll just take a #NM
+ * fault and get the FPU access back.
+ *
+ * The actual user_fpu_begin/end() functions
+ * need to be preemption-safe, though.
+ *
+ * NOTE! user_fpu_end() must be used only after you
+ * have saved the FP state, and user_fpu_begin() must
+ * be used only immediately before restoring it.
+ * These functions do not do any save/restore on
+ * their own.
+ */
+static inline int user_has_fpu(void)
+{
+ return __thread_has_fpu(current);
+}
+
+static inline void user_fpu_end(void)
+{
+ preempt_disable();
+ __thread_fpu_end(current);
+ preempt_enable();
+}
+
+static inline void user_fpu_begin(void)
+{
+ preempt_disable();
+ if (!user_has_fpu())
+ __thread_fpu_begin(current);
+ preempt_enable();
+}
+
/*
* These disable preemption on their own and are safe
*/
static inline void save_init_fpu(struct task_struct *tsk)
{
- WARN_ON_ONCE(task_thread_info(tsk)->status & TS_USEDFPU);
+ WARN_ON_ONCE(!__thread_has_fpu(tsk));
preempt_disable();
__save_init_fpu(tsk);
- stts();
+ __thread_fpu_end(tsk);
preempt_enable();
}
static inline void unlazy_fpu(struct task_struct *tsk)
{
preempt_disable();
- __unlazy_fpu(tsk);
+ if (__thread_has_fpu(tsk)) {
+ __save_init_fpu(tsk);
+ __thread_fpu_end(tsk);
+ } else
+ tsk->fpu_counter = 0;
preempt_enable();
}
static inline void perf_events_lapic_init(void) { }
#endif
+#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_AMD)
+ extern void amd_pmu_enable_virt(void);
+ extern void amd_pmu_disable_virt(void);
+#else
+ static inline void amd_pmu_enable_virt(void) { }
+ static inline void amd_pmu_disable_virt(void) { }
+#endif
+
#endif /* _ASM_X86_PERF_EVENT_H */
};
struct fpu {
+ unsigned int last_cpu;
+ unsigned int has_fpu;
union thread_xstate *state;
};
* ever touches our thread-synchronous status, so we don't
* have to worry about atomic accesses.
*/
-#define TS_USEDFPU 0x0001 /* FPU was used by this task
- this quantum (SMP) */
#define TS_COMPAT 0x0002 /* 32bit syscall active (64BIT)*/
#define TS_POLLING 0x0004 /* idle task polling need_resched,
skip sending interrupt */
DEFINE_PER_CPU(unsigned int, irq_count) = -1;
+DEFINE_PER_CPU(struct task_struct *, fpu_owner_task);
+EXPORT_PER_CPU_SYMBOL(fpu_owner_task);
+
/*
* Special IST stacks which the CPU switches to when it calls
* an IST-marked descriptor entry. Up to 7 stacks (hardware
DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
EXPORT_PER_CPU_SYMBOL(current_task);
+DEFINE_PER_CPU(struct task_struct *, fpu_owner_task);
+EXPORT_PER_CPU_SYMBOL(fpu_owner_task);
#ifdef CONFIG_CC_STACKPROTECTOR
DEFINE_PER_CPU_ALIGNED(struct stack_canary, stack_canary);
l3->indices = (max(max3(sc0, sc1, sc2), sc3) << 10) - 1;
}
-static void __cpuinit amd_init_l3_cache(struct _cpuid4_info_regs *this_leaf,
- int index)
+static void __cpuinit amd_init_l3_cache(struct _cpuid4_info_regs *this_leaf, int index)
{
int node;
#define CPUID4_INFO_IDX(x, y) (&((per_cpu(ici_cpuid4_info, x))[y]))
#ifdef CONFIG_SMP
-static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
+
+static int __cpuinit cache_shared_amd_cpu_map_setup(unsigned int cpu, int index)
{
- struct _cpuid4_info *this_leaf, *sibling_leaf;
- unsigned long num_threads_sharing;
- int index_msb, i, sibling;
+ struct _cpuid4_info *this_leaf;
+ int ret, i, sibling;
struct cpuinfo_x86 *c = &cpu_data(cpu);
- if ((index == 3) && (c->x86_vendor == X86_VENDOR_AMD)) {
+ ret = 0;
+ if (index == 3) {
+ ret = 1;
for_each_cpu(i, cpu_llc_shared_mask(cpu)) {
if (!per_cpu(ici_cpuid4_info, i))
continue;
set_bit(sibling, this_leaf->shared_cpu_map);
}
}
- return;
+ } else if ((c->x86 == 0x15) && ((index == 1) || (index == 2))) {
+ ret = 1;
+ for_each_cpu(i, cpu_sibling_mask(cpu)) {
+ if (!per_cpu(ici_cpuid4_info, i))
+ continue;
+ this_leaf = CPUID4_INFO_IDX(i, index);
+ for_each_cpu(sibling, cpu_sibling_mask(cpu)) {
+ if (!cpu_online(sibling))
+ continue;
+ set_bit(sibling, this_leaf->shared_cpu_map);
+ }
+ }
}
+
+ return ret;
+}
+
+static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
+{
+ struct _cpuid4_info *this_leaf, *sibling_leaf;
+ unsigned long num_threads_sharing;
+ int index_msb, i;
+ struct cpuinfo_x86 *c = &cpu_data(cpu);
+
+ if (c->x86_vendor == X86_VENDOR_AMD) {
+ if (cache_shared_amd_cpu_map_setup(cpu, index))
+ return;
+ }
+
this_leaf = CPUID4_INFO_IDX(cpu, index);
num_threads_sharing = 1 + this_leaf->base.eax.split.num_threads_sharing;
sprintf(name, "threshold_bank%i", bank);
+#ifdef CONFIG_SMP
if (cpu_data(cpu).cpu_core_id && shared_bank[bank]) { /* symlink */
i = cpumask_first(cpu_llc_shared_mask(cpu));
goto out;
}
+#endif
b = kzalloc(sizeof(struct threshold_bank), GFP_KERNEL);
if (!b) {
/*
* AMD specific bits
*/
- struct amd_nb *amd_nb;
+ struct amd_nb *amd_nb;
+ /* Inverted mask of bits to clear in the perf_ctr ctrl registers */
+ u64 perf_ctr_virt_mask;
void *kfree_on_online;
};
static inline void __x86_pmu_enable_event(struct hw_perf_event *hwc,
u64 enable_mask)
{
+ u64 disable_mask = __this_cpu_read(cpu_hw_events.perf_ctr_virt_mask);
+
if (hwc->extra_reg.reg)
wrmsrl(hwc->extra_reg.reg, hwc->extra_reg.config);
- wrmsrl(hwc->config_base, hwc->config | enable_mask);
+ wrmsrl(hwc->config_base, (hwc->config | enable_mask) & ~disable_mask);
}
void x86_pmu_enable_all(int added);
#include <linux/perf_event.h>
+#include <linux/export.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/slab.h>
struct amd_nb *nb;
int i, nb_id;
- if (boot_cpu_data.x86_max_cores < 2)
+ cpuc->perf_ctr_virt_mask = AMD_PERFMON_EVENTSEL_HOSTONLY;
+
+ if (boot_cpu_data.x86_max_cores < 2 || boot_cpu_data.x86 == 0x15)
return;
nb_id = amd_get_nb_id(cpu);
.put_event_constraints = amd_put_event_constraints,
.cpu_prepare = amd_pmu_cpu_prepare,
- .cpu_starting = amd_pmu_cpu_starting,
.cpu_dead = amd_pmu_cpu_dead,
#endif
+ .cpu_starting = amd_pmu_cpu_starting,
};
__init int amd_pmu_init(void)
return 0;
}
+
+void amd_pmu_enable_virt(void)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+ cpuc->perf_ctr_virt_mask = 0;
+
+ /* Reload all events */
+ x86_pmu_disable_all();
+ x86_pmu_enable_all(0);
+}
+EXPORT_SYMBOL_GPL(amd_pmu_enable_virt);
+
+void amd_pmu_disable_virt(void)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+ /*
+ * We only mask out the Host-only bit so that host-only counting works
+ * when SVM is disabled. If someone sets up a guest-only counter when
+ * SVM is disabled the Guest-only bits still gets set and the counter
+ * will not count anything.
+ */
+ cpuc->perf_ctr_virt_mask = AMD_PERFMON_EVENTSEL_HOSTONLY;
+
+ /* Reload all events */
+ x86_pmu_disable_all();
+ x86_pmu_enable_all(0);
+}
+EXPORT_SYMBOL_GPL(amd_pmu_disable_virt);
/* Use %rdx as out temp variable throughout */
pushq_cfi %rdx
+ /*
+ * If %cs was not the kernel segment, then the NMI triggered in user
+ * space, which means it is definitely not nested.
+ */
+ cmpl $__KERNEL_CS, 16(%rsp)
+ jne first_nmi
+
/*
* Check the special variable on the stack to see if NMIs are
* executing.
*/
- cmp $1, -8(%rsp)
+ cmpl $1, -8(%rsp)
je nested_nmi
/*
static enum ucode_state
request_microcode_user(int cpu, const void __user *buf, size_t size)
{
- pr_info("AMD microcode update via /dev/cpu/microcode not supported\n");
return UCODE_ERROR;
}
task_user_gs(p) = get_user_gs(regs);
+ p->fpu_counter = 0;
p->thread.io_bitmap_ptr = NULL;
tsk = current;
err = -ENOMEM;
*next = &next_p->thread;
int cpu = smp_processor_id();
struct tss_struct *tss = &per_cpu(init_tss, cpu);
- bool preload_fpu;
+ fpu_switch_t fpu;
/* never put a printk in __switch_to... printk() calls wake_up*() indirectly */
- /*
- * If the task has used fpu the last 5 timeslices, just do a full
- * restore of the math state immediately to avoid the trap; the
- * chances of needing FPU soon are obviously high now
- */
- preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5;
-
- __unlazy_fpu(prev_p);
-
- /* we're going to use this soon, after a few expensive things */
- if (preload_fpu)
- prefetch(next->fpu.state);
+ fpu = switch_fpu_prepare(prev_p, next_p, cpu);
/*
* Reload esp0.
task_thread_info(next_p)->flags & _TIF_WORK_CTXSW_NEXT))
__switch_to_xtra(prev_p, next_p, tss);
- /* If we're going to preload the fpu context, make sure clts
- is run while we're batching the cpu state updates. */
- if (preload_fpu)
- clts();
-
/*
* Leave lazy mode, flushing any hypercalls made here.
* This must be done before restoring TLS segments so
*/
arch_end_context_switch(next_p);
- if (preload_fpu)
- __math_state_restore();
-
/*
* Restore %gs if needed (which is common)
*/
if (prev->gs | next->gs)
lazy_load_gs(next->gs);
+ switch_fpu_finish(next_p, fpu);
+
percpu_write(current_task, next_p);
return prev_p;
set_tsk_thread_flag(p, TIF_FORK);
+ p->fpu_counter = 0;
p->thread.io_bitmap_ptr = NULL;
savesegment(gs, p->thread.gsindex);
int cpu = smp_processor_id();
struct tss_struct *tss = &per_cpu(init_tss, cpu);
unsigned fsindex, gsindex;
- bool preload_fpu;
+ fpu_switch_t fpu;
- /*
- * If the task has used fpu the last 5 timeslices, just do a full
- * restore of the math state immediately to avoid the trap; the
- * chances of needing FPU soon are obviously high now
- */
- preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5;
-
- /* we're going to use this soon, after a few expensive things */
- if (preload_fpu)
- prefetch(next->fpu.state);
+ fpu = switch_fpu_prepare(prev_p, next_p, cpu);
/*
* Reload esp0, LDT and the page table pointer:
load_TLS(next, cpu);
- /* Must be after DS reload */
- __unlazy_fpu(prev_p);
-
- /* Make sure cpu is ready for new context */
- if (preload_fpu)
- clts();
-
/*
* Leave lazy mode, flushing any hypercalls made here.
* This must be done before restoring TLS segments so
wrmsrl(MSR_KERNEL_GS_BASE, next->gs);
prev->gsindex = gsindex;
+ switch_fpu_finish(next_p, fpu);
+
/*
* Switch the PDA and FPU contexts.
*/
task_thread_info(prev_p)->flags & _TIF_WORK_CTXSW_PREV))
__switch_to_xtra(prev_p, next_p, tss);
- /*
- * Preload the FPU context, now that we've determined that the
- * task is likely to be using it.
- */
- if (preload_fpu)
- __math_state_restore();
-
return prev_p;
}
{
}
-/*
- * __math_state_restore assumes that cr0.TS is already clear and the
- * fpu state is all ready for use. Used during context switch.
- */
-void __math_state_restore(void)
-{
- struct thread_info *thread = current_thread_info();
- struct task_struct *tsk = thread->task;
-
- /*
- * Paranoid restore. send a SIGSEGV if we fail to restore the state.
- */
- if (unlikely(restore_fpu_checking(tsk))) {
- stts();
- force_sig(SIGSEGV, tsk);
- return;
- }
-
- thread->status |= TS_USEDFPU; /* So we fnsave on switch_to() */
- tsk->fpu_counter++;
-}
-
/*
* 'math_state_restore()' saves the current math information in the
* old math state array, and gets the new ones from the current task
*/
void math_state_restore(void)
{
- struct thread_info *thread = current_thread_info();
- struct task_struct *tsk = thread->task;
+ struct task_struct *tsk = current;
if (!tsk_used_math(tsk)) {
local_irq_enable();
local_irq_disable();
}
- clts(); /* Allow maths ops (or we recurse) */
+ __thread_fpu_begin(tsk);
+ /*
+ * Paranoid restore. send a SIGSEGV if we fail to restore the state.
+ */
+ if (unlikely(restore_fpu_checking(tsk))) {
+ __thread_fpu_end(tsk);
+ force_sig(SIGSEGV, tsk);
+ return;
+ }
- __math_state_restore();
+ tsk->fpu_counter++;
}
EXPORT_SYMBOL_GPL(math_state_restore);
dotraplinkage void __kprobes
do_device_not_available(struct pt_regs *regs, long error_code)
{
- WARN_ON_ONCE(!user_mode_vm(regs));
#ifdef CONFIG_MATH_EMULATION
if (read_cr0() & X86_CR0_EM) {
struct math_emu_info info = { };
if (!fx)
return;
- BUG_ON(task_thread_info(tsk)->status & TS_USEDFPU);
+ BUG_ON(__thread_has_fpu(tsk));
xstate_bv = tsk->thread.fpu.state->xsave.xsave_hdr.xstate_bv;
if (!used_math())
return 0;
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
+ if (user_has_fpu()) {
if (use_xsave())
err = xsave_user(buf);
else
if (err)
return err;
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
- stts();
+ user_fpu_end();
} else {
sanitize_i387_state(tsk);
if (__copy_to_user(buf, &tsk->thread.fpu.state->fxsave,
return err;
}
- if (!(task_thread_info(current)->status & TS_USEDFPU)) {
- clts();
- task_thread_info(current)->status |= TS_USEDFPU;
- }
+ user_fpu_begin();
if (use_xsave())
err = restore_user_xstate(buf);
else
#include <linux/ftrace_event.h>
#include <linux/slab.h>
+#include <asm/perf_event.h>
#include <asm/tlbflush.h>
#include <asm/desc.h>
#include <asm/kvm_para.h>
wrmsrl(MSR_AMD64_TSC_RATIO, TSC_RATIO_DEFAULT);
cpu_svm_disable();
+
+ amd_pmu_disable_virt();
}
static int svm_hardware_enable(void *garbage)
svm_init_erratum_383();
+ amd_pmu_enable_virt();
+
return 0;
}
#ifdef CONFIG_X86_64
wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
#endif
- if (current_thread_info()->status & TS_USEDFPU)
+ if (__thread_has_fpu(current))
clts();
load_gdt(&__get_cpu_var(host_gdt));
}
int __init pci_xen_hvm_init(void)
{
- if (!xen_feature(XENFEAT_hvm_pirqs))
+ if (!xen_have_vector_callback || !xen_feature(XENFEAT_hvm_pirqs))
return 0;
#ifdef CONFIG_ACPI
/* Prevent unwanted bits from being set in PTEs. */
__supported_pte_mask &= ~_PAGE_GLOBAL;
+#if 0
if (!xen_initial_domain())
+#endif
__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
__supported_pte_mask |= _PAGE_IOMAP;
pgd = (pgd_t *)xen_start_info->pt_base;
- if (!xen_initial_domain())
- __supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
-
- __supported_pte_mask |= _PAGE_IOMAP;
/* Don't do the full vcpu_info placement stuff until we have a
possible map and a non-dummy shared_info. */
per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
static pteval_t xen_pte_val(pte_t pte)
{
pteval_t pteval = pte.pte;
-
+#if 0
/* If this is a WC pte, convert back from Xen WC to Linux WC */
if ((pteval & (_PAGE_PAT | _PAGE_PCD | _PAGE_PWT)) == _PAGE_PAT) {
WARN_ON(!pat_enabled);
pteval = (pteval & ~_PAGE_PAT) | _PAGE_PWT;
}
-
+#endif
if (xen_initial_domain() && (pteval & _PAGE_IOMAP))
return pteval;
static pte_t xen_make_pte(pteval_t pte)
{
phys_addr_t addr = (pte & PTE_PFN_MASK);
-
+#if 0
/* If Linux is trying to set a WC pte, then map to the Xen WC.
* If _PAGE_PAT is set, then it probably means it is really
* _PAGE_PSE, so avoid fiddling with the PAT mapping and hope
if ((pte & (_PAGE_PCD | _PAGE_PWT)) == _PAGE_PWT)
pte = (pte & ~(_PAGE_PCD | _PAGE_PWT)) | _PAGE_PAT;
}
-
+#endif
/*
* Unprivileged domains are allowed to do IOMAPpings for
* PCI passthrough, but not map ISA space. The ISA
play_dead_common();
HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
cpu_bringup();
+ /*
+ * Balance out the preempt calls - as we are running in cpu_idle
+ * loop which has been called at bootup from cpu_bringup_and_idle.
+ * The cpucpu_bringup_and_idle called cpu_bringup which made a
+ * preempt_disable() So this preempt_enable will balance it out.
+ */
+ preempt_enable();
}
#else /* !CONFIG_HOTPLUG_CPU */
* ldm - Support for Windows Logical Disk Manager (Dynamic Disks)
*
* Copyright (C) 2001,2002 Richard Russon <ldm@flatcap.org>
- * Copyright (c) 2001-2007 Anton Altaparmakov
+ * Copyright (c) 2001-2012 Anton Altaparmakov
* Copyright (C) 2001,2002 Jakob Kemi <jakob.kemi@telia.com>
*
* Documentation is available at http://www.linux-ntfs.org/doku.php?id=downloads
ldm_error("REC value (%d) exceeds NUM value (%d)", rec, f->num);
return false;
}
-
if (f->map & (1 << rec)) {
ldm_error ("Duplicate VBLK, part %d.", rec);
f->map &= 0x7F; /* Mark the group as broken */
return false;
}
-
f->map |= (1 << rec);
-
+ if (!rec)
+ memcpy(f->data, data, VBLK_SIZE_HEAD);
data += VBLK_SIZE_HEAD;
size -= VBLK_SIZE_HEAD;
-
- memcpy (f->data+rec*(size-VBLK_SIZE_HEAD)+VBLK_SIZE_HEAD, data, size);
-
+ memcpy(f->data + VBLK_SIZE_HEAD + rec * size, data, size);
return true;
}
return (x & y) | (z & (x | y));
}
-static inline u64 RORu64(u64 x, u64 y)
-{
- return (x >> y) | (x << (64 - y));
-}
-
static const u64 sha512_K[80] = {
0x428a2f98d728ae22ULL, 0x7137449123ef65cdULL, 0xb5c0fbcfec4d3b2fULL,
0xe9b5dba58189dbbcULL, 0x3956c25bf348b538ULL, 0x59f111f1b605d019ULL,
0x5fcb6fab3ad6faecULL, 0x6c44198c4a475817ULL,
};
-#define e0(x) (RORu64(x,28) ^ RORu64(x,34) ^ RORu64(x,39))
-#define e1(x) (RORu64(x,14) ^ RORu64(x,18) ^ RORu64(x,41))
-#define s0(x) (RORu64(x, 1) ^ RORu64(x, 8) ^ (x >> 7))
-#define s1(x) (RORu64(x,19) ^ RORu64(x,61) ^ (x >> 6))
+#define e0(x) (ror64(x,28) ^ ror64(x,34) ^ ror64(x,39))
+#define e1(x) (ror64(x,14) ^ ror64(x,18) ^ ror64(x,41))
+#define s0(x) (ror64(x, 1) ^ ror64(x, 8) ^ (x >> 7))
+#define s1(x) (ror64(x,19) ^ ror64(x,61) ^ (x >> 6))
static inline void LOAD_OP(int I, u64 *W, const u8 *input)
{
{
int ret = 0;
int use_iordy;
+ struct sam9_smc_config smc;
unsigned int t6z; /* data tristate time in ns */
unsigned int cycle; /* SMC Cycle width in MCK ticks */
unsigned int setup; /* SMC Setup width in MCK ticks */
unsigned int pulse; /* CFIOR and CFIOW pulse width in MCK ticks */
- unsigned int cs_setup = 0;/* CS4 or CS5 setup width in MCK ticks */
unsigned int cs_pulse; /* CS4 or CS5 pulse width in MCK ticks*/
unsigned int tdf_cycles; /* SMC TDF MCK ticks */
unsigned long mck_hz; /* MCK frequency in Hz */
}
dev_dbg(dev, "Use IORDY=%u, TDF Cycles=%u\n", use_iordy, tdf_cycles);
- info->mode |= AT91_SMC_TDF_(tdf_cycles);
-
- /* write SMC Setup Register */
- at91_sys_write(AT91_SMC_SETUP(info->cs),
- AT91_SMC_NWESETUP_(setup) |
- AT91_SMC_NRDSETUP_(setup) |
- AT91_SMC_NCS_WRSETUP_(cs_setup) |
- AT91_SMC_NCS_RDSETUP_(cs_setup));
- /* write SMC Pulse Register */
- at91_sys_write(AT91_SMC_PULSE(info->cs),
- AT91_SMC_NWEPULSE_(pulse) |
- AT91_SMC_NRDPULSE_(pulse) |
- AT91_SMC_NCS_WRPULSE_(cs_pulse) |
- AT91_SMC_NCS_RDPULSE_(cs_pulse));
- /* write SMC Cycle Register */
- at91_sys_write(AT91_SMC_CYCLE(info->cs),
- AT91_SMC_NWECYCLE_(cycle) |
- AT91_SMC_NRDCYCLE_(cycle));
- /* write SMC Mode Register*/
- at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
+
+ /* SMC Setup Register */
+ smc.nwe_setup = smc.nrd_setup = setup;
+ smc.ncs_write_setup = smc.ncs_read_setup = 0;
+ /* SMC Pulse Register */
+ smc.nwe_pulse = smc.nrd_pulse = pulse;
+ smc.ncs_write_pulse = smc.ncs_read_pulse = cs_pulse;
+ /* SMC Cycle Register */
+ smc.write_cycle = smc.read_cycle = cycle;
+ /* SMC Mode Register*/
+ smc.tdf_cycles = tdf_cycles;
+ smc.mode = info->mode;
+
+ sam9_smc_configure(0, info->cs, &smc);
}
static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev)
struct at91_ide_info *info = dev->link->ap->host->private_data;
unsigned int consumed;
unsigned long flags;
- unsigned int mode;
+ struct sam9_smc_config smc;
local_irq_save(flags);
- mode = at91_sys_read(AT91_SMC_MODE(info->cs));
+ sam9_smc_read_mode(0, info->cs, &smc);
/* set 16bit mode before writing data */
- at91_sys_write(AT91_SMC_MODE(info->cs),
- (mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_16);
+ smc.mode = (smc.mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_16;
+ sam9_smc_write_mode(0, info->cs, &smc);
consumed = ata_sff_data_xfer(dev, buf, buflen, rw);
/* restore 8bit mode after data is written */
- at91_sys_write(AT91_SMC_MODE(info->cs),
- (mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_8);
+ smc.mode = (smc.mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_8;
+ sam9_smc_write_mode(0, info->cs, &smc);
local_irq_restore(flags);
return consumed;
out_unmap_both:
pci_set_drvdata(dev, NULL);
- pci_iounmap(dev, card->config_regs);
- out_unmap_config:
pci_iounmap(dev, card->buffers);
+ out_unmap_config:
+ pci_iounmap(dev, card->config_regs);
out_release_regions:
pci_release_regions(dev);
out:
for (count = 0, i = 0; i < map->num_reg_defaults_raw; i++) {
val = regcache_get_val(map->reg_defaults_raw,
i, map->cache_word_size);
- if (!val)
+ if (regmap_volatile(map, i))
continue;
count++;
}
for (i = 0, j = 0; i < map->num_reg_defaults_raw; i++) {
val = regcache_get_val(map->reg_defaults_raw,
i, map->cache_word_size);
- if (!val)
+ if (regmap_volatile(map, i))
continue;
map->reg_defaults[j].reg = i;
map->reg_defaults[j].def = val;
#include <linux/types.h>
#include <linux/version.h>
+#include <asm-generic/io-64-nonatomic-lo-hi.h>
+
#define NVME_Q_DEPTH 1024
#define SQ_SIZE(depth) (depth * sizeof(struct nvme_command))
#define CQ_SIZE(depth) (depth * sizeof(struct nvme_completion))
/* Broadcom BCM20702A0 */
{ USB_DEVICE(0x0a5c, 0x21e3) },
+ { USB_DEVICE(0x0a5c, 0x21f3) },
{ USB_DEVICE(0x413c, 0x8197) },
{ } /* Terminating entry */
usb_fill_bulk_urb(urb, data->udev, pipe,
skb->data, skb->len, btusb_tx_complete, skb);
- if (skb->priority >= HCI_PRIO_MAX - 1)
- urb->transfer_flags = URB_ISO_ASAP;
-
hdev->stat.acl_tx++;
break;
config CPU_IDLE
bool "CPU idle PM support"
- default ACPI
+ default y if ACPI || PPC_PSERIES
help
CPU idle is a generic framework for supporting software-controlled
idle processor power management. It includes modular cross-platform
{
struct mv_req_hash_ctx *ctx = ahash_request_ctx(req);
+ ahash_request_set_crypt(req, NULL, req->result, 0);
mv_update_hash_req_ctx(ctx, 1, 0);
return mv_handle_req(&req->base);
}
#include <linux/io.h>
#include "edac_core.h"
+#include <asm-generic/io-64-nonatomic-lo-hi.h>
+
#define I3200_REVISION "1.1"
#define EDAC_MOD_STR "i3200_edac"
static int nr_channels;
-#ifndef readq
-static inline __u64 readq(const volatile void __iomem *addr)
-{
- const volatile u32 __iomem *p = addr;
- u32 low, high;
-
- low = readl(p);
- high = readl(p + 1);
-
- return low + ((u64)high << 32);
-}
-#endif
-
static int how_many_channels(struct pci_dev *pdev)
{
unsigned char capid0_8b; /* 8th byte of CAPID0 */
#include "drmP.h"
#include "drm_crtc_helper.h"
+#include <drm/exynos_drm.h>
#include "exynos_drm_drv.h"
#include "exynos_drm_encoder.h"
/* convert exynos_video_timings to drm_display_mode */
static inline void
convert_to_display_mode(struct drm_display_mode *mode,
- struct fb_videomode *timing)
+ struct exynos_drm_panel_info *panel)
{
+ struct fb_videomode *timing = &panel->timing;
DRM_DEBUG_KMS("%s\n", __FILE__);
mode->clock = timing->pixclock / 1000;
mode->vsync_start = mode->vdisplay + timing->upper_margin;
mode->vsync_end = mode->vsync_start + timing->vsync_len;
mode->vtotal = mode->vsync_end + timing->lower_margin;
+ mode->width_mm = panel->width_mm;
+ mode->height_mm = panel->height_mm;
if (timing->vmode & FB_VMODE_INTERLACED)
mode->flags |= DRM_MODE_FLAG_INTERLACE;
connector->display_info.raw_edid = edid;
} else {
struct drm_display_mode *mode = drm_mode_create(connector->dev);
- struct fb_videomode *timing;
+ struct exynos_drm_panel_info *panel;
- if (display_ops->get_timing)
- timing = display_ops->get_timing(manager->dev);
+ if (display_ops->get_panel)
+ panel = display_ops->get_panel(manager->dev);
else {
drm_mode_destroy(connector->dev, mode);
return 0;
}
- convert_to_display_mode(mode, timing);
+ convert_to_display_mode(mode, panel);
+ connector->display_info.width_mm = mode->width_mm;
+ connector->display_info.height_mm = mode->height_mm;
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
drm_mode_set_name(mode);
return err;
}
+ /* setup possible_clones. */
+ exynos_drm_encoder_setup(drm_dev);
+
/*
* if any specific driver such as fimd or hdmi driver called
* exynos_drm_subdrv_register() later than drm_load(),
*/
event->pipe = exynos_crtc->pipe;
- list_add_tail(&event->base.link,
- &dev_priv->pageflip_event_list);
-
ret = drm_vblank_get(dev, exynos_crtc->pipe);
if (ret) {
DRM_DEBUG("failed to acquire vblank counter\n");
goto out;
}
+ list_add_tail(&event->base.link,
+ &dev_priv->pageflip_event_list);
+
crtc->fb = fb;
ret = exynos_drm_crtc_update(crtc);
if (ret) {
#include "exynos_drm_drv.h"
#include "exynos_drm_crtc.h"
+#include "exynos_drm_encoder.h"
#include "exynos_drm_fbdev.h"
#include "exynos_drm_fb.h"
#include "exynos_drm_gem.h"
if (ret)
goto err_vblank;
+ /* setup possible_clones. */
+ exynos_drm_encoder_setup(dev);
+
/*
* create and configure fb helper and also exynos specific
* fbdev object.
}
static void exynos_drm_preclose(struct drm_device *dev,
- struct drm_file *file_priv)
+ struct drm_file *file)
{
- struct exynos_drm_private *dev_priv = dev->dev_private;
+ DRM_DEBUG_DRIVER("%s\n", __FILE__);
- /*
- * drm framework frees all events at release time,
- * so private event list should be cleared.
- */
- if (!list_empty(&dev_priv->pageflip_event_list))
- INIT_LIST_HEAD(&dev_priv->pageflip_event_list);
+}
+
+static void exynos_drm_postclose(struct drm_device *dev, struct drm_file *file)
+{
+ DRM_DEBUG_DRIVER("%s\n", __FILE__);
+
+ if (!file->driver_priv)
+ return;
+
+ kfree(file->driver_priv);
+ file->driver_priv = NULL;
}
static void exynos_drm_lastclose(struct drm_device *dev)
.unload = exynos_drm_unload,
.preclose = exynos_drm_preclose,
.lastclose = exynos_drm_lastclose,
+ .postclose = exynos_drm_postclose,
.get_vblank_counter = drm_vblank_count,
.enable_vblank = exynos_drm_crtc_enable_vblank,
.disable_vblank = exynos_drm_crtc_disable_vblank,
* @type: one of EXYNOS_DISPLAY_TYPE_LCD and HDMI.
* @is_connected: check for that display is connected or not.
* @get_edid: get edid modes from display driver.
- * @get_timing: get timing object from display driver.
+ * @get_panel: get panel object from display driver.
* @check_timing: check if timing is valid or not.
* @power_on: display device on or off.
*/
bool (*is_connected)(struct device *dev);
int (*get_edid)(struct device *dev, struct drm_connector *connector,
u8 *edid, int len);
- void *(*get_timing)(struct device *dev);
+ void *(*get_panel)(struct device *dev);
int (*check_timing)(struct device *dev, void *timing);
int (*power_on)(struct device *dev, int mode);
};
.destroy = exynos_drm_encoder_destroy,
};
+static unsigned int exynos_drm_encoder_clones(struct drm_encoder *encoder)
+{
+ struct drm_encoder *clone;
+ struct drm_device *dev = encoder->dev;
+ struct exynos_drm_encoder *exynos_encoder = to_exynos_encoder(encoder);
+ struct exynos_drm_display_ops *display_ops =
+ exynos_encoder->manager->display_ops;
+ unsigned int clone_mask = 0;
+ int cnt = 0;
+
+ list_for_each_entry(clone, &dev->mode_config.encoder_list, head) {
+ switch (display_ops->type) {
+ case EXYNOS_DISPLAY_TYPE_LCD:
+ case EXYNOS_DISPLAY_TYPE_HDMI:
+ clone_mask |= (1 << (cnt++));
+ break;
+ default:
+ continue;
+ }
+ }
+
+ return clone_mask;
+}
+
+void exynos_drm_encoder_setup(struct drm_device *dev)
+{
+ struct drm_encoder *encoder;
+
+ DRM_DEBUG_KMS("%s\n", __FILE__);
+
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
+ encoder->possible_clones = exynos_drm_encoder_clones(encoder);
+}
+
struct drm_encoder *
exynos_drm_encoder_create(struct drm_device *dev,
struct exynos_drm_manager *manager,
struct exynos_drm_manager;
+void exynos_drm_encoder_setup(struct drm_device *dev);
struct drm_encoder *exynos_drm_encoder_create(struct drm_device *dev,
struct exynos_drm_manager *mgr,
unsigned int possible_crtcs);
return ret;
}
-static bool
-exynos_drm_fbdev_is_samefb(struct drm_framebuffer *fb,
- struct drm_fb_helper_surface_size *sizes)
-{
- if (fb->width != sizes->surface_width)
- return false;
- if (fb->height != sizes->surface_height)
- return false;
- if (fb->bits_per_pixel != sizes->surface_bpp)
- return false;
- if (fb->depth != sizes->surface_depth)
- return false;
-
- return true;
-}
-
-static int exynos_drm_fbdev_recreate(struct drm_fb_helper *helper,
- struct drm_fb_helper_surface_size *sizes)
-{
- struct drm_device *dev = helper->dev;
- struct exynos_drm_fbdev *exynos_fbdev = to_exynos_fbdev(helper);
- struct exynos_drm_gem_obj *exynos_gem_obj;
- struct drm_framebuffer *fb = helper->fb;
- struct drm_mode_fb_cmd2 mode_cmd = { 0 };
- unsigned long size;
-
- DRM_DEBUG_KMS("%s\n", __FILE__);
-
- if (exynos_drm_fbdev_is_samefb(fb, sizes))
- return 0;
-
- mode_cmd.width = sizes->surface_width;
- mode_cmd.height = sizes->surface_height;
- mode_cmd.pitches[0] = sizes->surface_width * (sizes->surface_bpp >> 3);
- mode_cmd.pixel_format = drm_mode_legacy_fb_format(sizes->surface_bpp,
- sizes->surface_depth);
-
- if (exynos_fbdev->exynos_gem_obj)
- exynos_drm_gem_destroy(exynos_fbdev->exynos_gem_obj);
-
- if (fb->funcs->destroy)
- fb->funcs->destroy(fb);
-
- size = mode_cmd.pitches[0] * mode_cmd.height;
- exynos_gem_obj = exynos_drm_gem_create(dev, size);
- if (IS_ERR(exynos_gem_obj))
- return PTR_ERR(exynos_gem_obj);
-
- exynos_fbdev->exynos_gem_obj = exynos_gem_obj;
-
- helper->fb = exynos_drm_framebuffer_init(dev, &mode_cmd,
- &exynos_gem_obj->base);
- if (IS_ERR_OR_NULL(helper->fb)) {
- DRM_ERROR("failed to create drm framebuffer.\n");
- return PTR_ERR(helper->fb);
- }
-
- return exynos_drm_fbdev_update(helper, helper->fb);
-}
-
static int exynos_drm_fbdev_probe(struct drm_fb_helper *helper,
struct drm_fb_helper_surface_size *sizes)
{
DRM_DEBUG_KMS("%s\n", __FILE__);
+ /*
+ * with !helper->fb, it means that this funcion is called first time
+ * and after that, the helper->fb would be used as clone mode.
+ */
if (!helper->fb) {
ret = exynos_drm_fbdev_create(helper, sizes);
if (ret < 0) {
* because register_framebuffer() should be called.
*/
ret = 1;
- } else {
- ret = exynos_drm_fbdev_recreate(helper, sizes);
- if (ret < 0) {
- DRM_ERROR("failed to reconfigure fbdev\n");
- return ret;
- }
}
return ret;
bool suspended;
struct mutex lock;
- struct fb_videomode *timing;
+ struct exynos_drm_panel_info *panel;
};
static bool fimd_display_is_connected(struct device *dev)
return true;
}
-static void *fimd_get_timing(struct device *dev)
+static void *fimd_get_panel(struct device *dev)
{
struct fimd_context *ctx = get_fimd_context(dev);
DRM_DEBUG_KMS("%s\n", __FILE__);
- return ctx->timing;
+ return ctx->panel;
}
static int fimd_check_timing(struct device *dev, void *timing)
static struct exynos_drm_display_ops fimd_display_ops = {
.type = EXYNOS_DISPLAY_TYPE_LCD,
.is_connected = fimd_display_is_connected,
- .get_timing = fimd_get_timing,
+ .get_panel = fimd_get_panel,
.check_timing = fimd_check_timing,
.power_on = fimd_display_power_on,
};
static void fimd_commit(struct device *dev)
{
struct fimd_context *ctx = get_fimd_context(dev);
- struct fb_videomode *timing = ctx->timing;
+ struct exynos_drm_panel_info *panel = ctx->panel;
+ struct fb_videomode *timing = &panel->timing;
u32 val;
if (ctx->suspended)
}
if (is_checked) {
- drm_vblank_put(drm_dev, crtc);
+ /*
+ * call drm_vblank_put only in case that drm_vblank_get was
+ * called.
+ */
+ if (atomic_read(&drm_dev->vblank_refcount[crtc]) > 0)
+ drm_vblank_put(drm_dev, crtc);
/*
* don't off vblank if vblank_disable_allowed is 1,
struct fimd_context *ctx;
struct exynos_drm_subdrv *subdrv;
struct exynos_drm_fimd_pdata *pdata;
- struct fb_videomode *timing;
+ struct exynos_drm_panel_info *panel;
struct resource *res;
int win;
int ret = -EINVAL;
return -EINVAL;
}
- timing = &pdata->timing;
- if (!timing) {
- dev_err(dev, "timing is null.\n");
+ panel = &pdata->panel;
+ if (!panel) {
+ dev_err(dev, "panel is null.\n");
return -EINVAL;
}
goto err_req_irq;
}
- ctx->clkdiv = fimd_calc_clkdiv(ctx, timing);
+ ctx->clkdiv = fimd_calc_clkdiv(ctx, &panel->timing);
ctx->vidcon0 = pdata->vidcon0;
ctx->vidcon1 = pdata->vidcon1;
ctx->default_win = pdata->default_win;
- ctx->timing = timing;
+ ctx->panel = panel;
- timing->pixclock = clk_get_rate(ctx->lcd_clk) / ctx->clkdiv;
+ panel->timing.pixclock = clk_get_rate(ctx->lcd_clk) / ctx->clkdiv;
DRM_DEBUG_KMS("pixel clock = %d, clkdiv = %d\n",
- timing->pixclock, ctx->clkdiv);
+ panel->timing.pixclock, ctx->clkdiv);
subdrv = &ctx->subdrv;
}
if (is_checked)
- drm_vblank_put(drm_dev, crtc);
+ /*
+ * call drm_vblank_put only in case that drm_vblank_get was
+ * called.
+ */
+ if (atomic_read(&drm_dev->vblank_refcount[crtc]) > 0)
+ drm_vblank_put(drm_dev, crtc);
spin_unlock_irqrestore(&drm_dev->event_lock, flags);
}
mixer_reg_writemask(res, MXR_STATUS, MXR_STATUS_16_BURST,
MXR_STATUS_BURST_MASK);
- /* setting default layer priority: layer1 > video > layer0
+ /* setting default layer priority: layer1 > layer0 > video
* because typical usage scenario would be
+ * layer1 - OSD
* layer0 - framebuffer
* video - video overlay
- * layer1 - OSD
*/
- val = MXR_LAYER_CFG_GRP0_VAL(1);
- val |= MXR_LAYER_CFG_VP_VAL(2);
- val |= MXR_LAYER_CFG_GRP1_VAL(3);
+ val = MXR_LAYER_CFG_GRP1_VAL(3);
+ val |= MXR_LAYER_CFG_GRP0_VAL(2);
+ val |= MXR_LAYER_CFG_VP_VAL(1);
mixer_reg_write(res, MXR_LAYER_CFG, val);
/* setting background color */
platform_get_drvdata(pdev);
struct mixer_context *ctx = (struct mixer_context *)drm_hdmi_ctx->ctx;
- dev_info(dev, "remove sucessful\n");
+ dev_info(dev, "remove successful\n");
mixer_resource_poweroff(ctx);
mixer_resources_cleanup(ctx);
#define DISP_TILE_SURFACE_SWIZZLING (1<<13)
#define DISP_FBC_WM_DIS (1<<15)
+/* GEN7 chicken */
+#define GEN7_COMMON_SLICE_CHICKEN1 0x7010
+# define GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC ((1<<10) | (1<<26))
+
+#define GEN7_L3CNTLREG1 0xB01C
+#define GEN7_WA_FOR_GEN7_L3_CONTROL 0x3C4FFF8C
+
+#define GEN7_L3_CHICKEN_MODE_REGISTER 0xB030
+#define GEN7_WA_L3_CHICKEN_MODE 0x20000000
+
+/* WaCatErrorRejectionIssue */
+#define GEN7_SQ_CHICKEN_MBCUNIT_CONFIG 0x9030
+#define GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB (1<<11)
+
/* PCH */
/* south display engine interrupt */
#define GT_FIFO_NUM_RESERVED_ENTRIES 20
#define GEN6_UCGCTL2 0x9404
+# define GEN6_RCZUNIT_CLOCK_GATE_DISABLE (1 << 13)
# define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE (1 << 12)
# define GEN6_RCCUNIT_CLOCK_GATE_DISABLE (1 << 11)
crtc = intel_get_crtc_for_plane(dev, plane);
clock = crtc->mode.clock;
+ if (!clock) {
+ *sprite_wm = 0;
+ return false;
+ }
line_time_us = (sprite_width * 1000) / clock;
+ if (!line_time_us) {
+ *sprite_wm = 0;
+ return false;
+ }
+
line_count = (latency_ns / line_time_us + 1000) / 1000;
line_size = sprite_width * pixel_size;
int i;
/* The clocks have to be on to load the palette. */
- if (!crtc->enabled)
+ if (!crtc->enabled || !intel_crtc->active)
return;
/* use legacy palette for Ironlake */
mode_cmd.height = mode->vdisplay;
mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
bpp);
- mode_cmd.pixel_format = 0;
+ mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
return intel_framebuffer_create(dev, &mode_cmd, obj);
}
I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */
if (intel_enable_rc6(dev_priv->dev))
- rc6_mask = GEN6_RC_CTL_RC6p_ENABLE |
- GEN6_RC_CTL_RC6_ENABLE;
+ rc6_mask = GEN6_RC_CTL_RC6_ENABLE |
+ ((IS_GEN7(dev_priv->dev)) ? GEN6_RC_CTL_RC6p_ENABLE : 0);
I915_WRITE(GEN6_RC_CONTROL,
rc6_mask |
I915_WRITE(WM2_LP_ILK, 0);
I915_WRITE(WM1_LP_ILK, 0);
+ /* According to the spec, bit 13 (RCZUNIT) must be set on IVB.
+ * This implements the WaDisableRCZUnitClockGating workaround.
+ */
+ I915_WRITE(GEN6_UCGCTL2, GEN6_RCZUNIT_CLOCK_GATE_DISABLE);
+
I915_WRITE(ILK_DSPCLK_GATE, IVB_VRHUNIT_CLK_GATE);
I915_WRITE(IVB_CHICKEN3,
CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE |
CHICKEN3_DGMG_DONE_FIX_DISABLE);
+ /* Apply the WaDisableRHWOOptimizationForRenderHang workaround. */
+ I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1,
+ GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC);
+
+ /* WaApplyL3ControlAndL3ChickenMode requires those two on Ivy Bridge */
+ I915_WRITE(GEN7_L3CNTLREG1,
+ GEN7_WA_FOR_GEN7_L3_CONTROL);
+ I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER,
+ GEN7_WA_L3_CHICKEN_MODE);
+
+ /* This is required by WaCatErrorRejectionIssue */
+ I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
+ I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
+ GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
+
for_each_pipe(pipe) {
I915_WRITE(DSPCNTR(pipe),
I915_READ(DSPCNTR(pipe)) |
I915_WRITE_CTL(ring,
((ring->size - PAGE_SIZE) & RING_NR_PAGES)
- | RING_REPORT_64K | RING_VALID);
+ | RING_VALID);
/* If the head is still not zero, the ring is dead */
if ((I915_READ_CTL(ring) & RING_VALID) == 0 ||
struct drm_device *dev = ring->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long end;
- u32 head;
-
- /* If the reported head position has wrapped or hasn't advanced,
- * fallback to the slow and accurate path.
- */
- head = intel_read_status_page(ring, 4);
- if (head > ring->head) {
- ring->head = head;
- ring->space = ring_space(ring);
- if (ring->space >= n)
- return 0;
- }
trace_i915_ring_wait_begin(ring);
if (drm_core_check_feature(dev, DRIVER_GEM))
r = evergreen_startup(rdev);
if (r) {
DRM_ERROR("evergreen startup failed on resume\n");
+ rdev->accel_working = false;
return r;
}
r = cayman_startup(rdev);
if (r) {
DRM_ERROR("cayman startup failed on resume\n");
+ rdev->accel_working = false;
return r;
}
return r;
WREG32(RADEON_AIC_CNTL, msi_rearm | RS400_MSI_REARM);
break;
default:
- msi_rearm = RREG32(RADEON_MSI_REARM_EN) & ~RV370_MSI_REARM_EN;
- WREG32(RADEON_MSI_REARM_EN, msi_rearm);
- WREG32(RADEON_MSI_REARM_EN, msi_rearm | RV370_MSI_REARM_EN);
+ WREG32(RADEON_MSI_REARM_EN, RV370_MSI_REARM_EN);
break;
}
}
int r100_resume(struct radeon_device *rdev)
{
+ int r;
+
/* Make sur GART are not working */
if (rdev->flags & RADEON_IS_PCI)
r100_pci_gart_disable(rdev);
radeon_surface_init(rdev);
rdev->accel_working = true;
- return r100_startup(rdev);
+ r = r100_startup(rdev);
+ if (r) {
+ rdev->accel_working = false;
+ }
+ return r;
}
int r100_suspend(struct radeon_device *rdev)
int r300_resume(struct radeon_device *rdev)
{
+ int r;
+
/* Make sur GART are not working */
if (rdev->flags & RADEON_IS_PCIE)
rv370_pcie_gart_disable(rdev);
radeon_surface_init(rdev);
rdev->accel_working = true;
- return r300_startup(rdev);
+ r = r300_startup(rdev);
+ if (r) {
+ rdev->accel_working = false;
+ }
+ return r;
}
int r300_suspend(struct radeon_device *rdev)
int r420_resume(struct radeon_device *rdev)
{
+ int r;
+
/* Make sur GART are not working */
if (rdev->flags & RADEON_IS_PCIE)
rv370_pcie_gart_disable(rdev);
radeon_surface_init(rdev);
rdev->accel_working = true;
- return r420_startup(rdev);
+ r = r420_startup(rdev);
+ if (r) {
+ rdev->accel_working = false;
+ }
+ return r;
}
int r420_suspend(struct radeon_device *rdev)
int r520_resume(struct radeon_device *rdev)
{
+ int r;
+
/* Make sur GART are not working */
if (rdev->flags & RADEON_IS_PCIE)
rv370_pcie_gart_disable(rdev);
radeon_surface_init(rdev);
rdev->accel_working = true;
- return r520_startup(rdev);
+ r = r520_startup(rdev);
+ if (r) {
+ rdev->accel_working = false;
+ }
+ return r;
}
int r520_init(struct radeon_device *rdev)
r = r600_startup(rdev);
if (r) {
DRM_ERROR("r600 startup failed on resume\n");
+ rdev->accel_working = false;
return r;
}
h0 = G_038004_TEX_HEIGHT(word1) + 1;
d0 = G_038004_TEX_DEPTH(word1);
nfaces = 1;
+ array = 0;
switch (G_038000_DIM(word0)) {
case V_038000_SQ_TEX_DIM_1D:
case V_038000_SQ_TEX_DIM_2D:
bios_6_scratch &= ~ATOM_S6_ACC_REQ_DFP5;
}
}
+ if ((radeon_encoder->devices & ATOM_DEVICE_DFP6_SUPPORT) &&
+ (radeon_connector->devices & ATOM_DEVICE_DFP6_SUPPORT)) {
+ if (connected) {
+ DRM_DEBUG_KMS("DFP6 connected\n");
+ bios_0_scratch |= ATOM_S0_DFP6;
+ bios_3_scratch |= ATOM_S3_DFP6_ACTIVE;
+ bios_6_scratch |= ATOM_S6_ACC_REQ_DFP6;
+ } else {
+ DRM_DEBUG_KMS("DFP6 disconnected\n");
+ bios_0_scratch &= ~ATOM_S0_DFP6;
+ bios_3_scratch &= ~ATOM_S3_DFP6_ACTIVE;
+ bios_6_scratch &= ~ATOM_S6_ACC_REQ_DFP6;
+ }
+ }
if (rdev->family >= CHIP_R600) {
WREG32(R600_BIOS_0_SCRATCH, bios_0_scratch);
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
uint32_t bios_3_scratch;
+ if (ASIC_IS_DCE4(rdev))
+ return;
+
if (rdev->family >= CHIP_R600)
bios_3_scratch = RREG32(R600_BIOS_3_SCRATCH);
else
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
uint32_t bios_2_scratch;
+ if (ASIC_IS_DCE4(rdev))
+ return;
+
if (rdev->family >= CHIP_R600)
bios_2_scratch = RREG32(R600_BIOS_2_SCRATCH);
else
(connector->connector_type == DRM_MODE_CONNECTOR_LVDS)) {
struct drm_display_mode *mode;
- if (!radeon_dig_connector->edp_on)
- atombios_set_edp_panel_power(connector,
- ATOM_TRANSMITTER_ACTION_POWER_ON);
- ret = radeon_ddc_get_modes(radeon_connector);
- if (!radeon_dig_connector->edp_on)
- atombios_set_edp_panel_power(connector,
- ATOM_TRANSMITTER_ACTION_POWER_OFF);
+ if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+ if (!radeon_dig_connector->edp_on)
+ atombios_set_edp_panel_power(connector,
+ ATOM_TRANSMITTER_ACTION_POWER_ON);
+ ret = radeon_ddc_get_modes(radeon_connector);
+ if (!radeon_dig_connector->edp_on)
+ atombios_set_edp_panel_power(connector,
+ ATOM_TRANSMITTER_ACTION_POWER_OFF);
+ } else {
+ /* need to setup ddc on the bridge */
+ if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) !=
+ ENCODER_OBJECT_ID_NONE) {
+ if (encoder)
+ radeon_atom_ext_encoder_setup_ddc(encoder);
+ }
+ ret = radeon_ddc_get_modes(radeon_connector);
+ }
if (ret > 0) {
if (encoder) {
return ret;
}
- encoder = radeon_best_single_encoder(connector);
if (!encoder)
return 0;
int r;
radeon_mutex_lock(&rdev->cs_mutex);
+ if (!rdev->accel_working) {
+ radeon_mutex_unlock(&rdev->cs_mutex);
+ return -EBUSY;
+ }
/* initialize parser */
memset(&parser, 0, sizeof(struct radeon_cs_parser));
parser.filp = filp;
int not_processed = 0;
read_lock_irqsave(&rdev->fence_lock, irq_flags);
- if (!rdev->fence_drv[ring].initialized)
+ if (!rdev->fence_drv[ring].initialized) {
+ read_unlock_irqrestore(&rdev->fence_lock, irq_flags);
return 0;
+ }
if (!list_empty(&rdev->fence_drv[ring].emitted)) {
struct list_head *ptr;
if (bo_va == NULL)
return 0;
- list_del(&bo_va->bo_list);
mutex_lock(&vm->mutex);
radeon_mutex_lock(&rdev->cs_mutex);
radeon_vm_bo_update_pte(rdev, vm, bo, NULL);
radeon_mutex_unlock(&rdev->cs_mutex);
list_del(&bo_va->vm_list);
mutex_unlock(&vm->mutex);
+ list_del(&bo_va->bo_list);
kfree(bo_va);
return 0;
int radeon_debugfs_ring_init(struct radeon_device *rdev)
{
#if defined(CONFIG_DEBUG_FS)
- return radeon_debugfs_add_files(rdev, radeon_debugfs_ring_info_list,
- ARRAY_SIZE(radeon_debugfs_ring_info_list));
+ if (rdev->family >= CHIP_CAYMAN)
+ return radeon_debugfs_add_files(rdev, radeon_debugfs_ring_info_list,
+ ARRAY_SIZE(radeon_debugfs_ring_info_list));
+ else
+ return radeon_debugfs_add_files(rdev, radeon_debugfs_ring_info_list, 1);
#else
return 0;
#endif
int rs400_resume(struct radeon_device *rdev)
{
+ int r;
+
/* Make sur GART are not working */
rs400_gart_disable(rdev);
/* Resume clock before doing reset */
radeon_surface_init(rdev);
rdev->accel_working = true;
- return rs400_startup(rdev);
+ r = rs400_startup(rdev);
+ if (r) {
+ rdev->accel_working = false;
+ }
+ return r;
}
int rs400_suspend(struct radeon_device *rdev)
WREG32(RADEON_BUS_CNTL, msi_rearm | RS600_MSI_REARM);
break;
default:
- msi_rearm = RREG32(RADEON_MSI_REARM_EN) & ~RV370_MSI_REARM_EN;
- WREG32(RADEON_MSI_REARM_EN, msi_rearm);
- WREG32(RADEON_MSI_REARM_EN, msi_rearm | RV370_MSI_REARM_EN);
+ WREG32(RADEON_MSI_REARM_EN, RV370_MSI_REARM_EN);
break;
}
}
int rs600_resume(struct radeon_device *rdev)
{
+ int r;
+
/* Make sur GART are not working */
rs600_gart_disable(rdev);
/* Resume clock before doing reset */
radeon_surface_init(rdev);
rdev->accel_working = true;
- return rs600_startup(rdev);
+ r = rs600_startup(rdev);
+ if (r) {
+ rdev->accel_working = false;
+ }
+ return r;
}
int rs600_suspend(struct radeon_device *rdev)
int rs690_resume(struct radeon_device *rdev)
{
+ int r;
+
/* Make sur GART are not working */
rs400_gart_disable(rdev);
/* Resume clock before doing reset */
radeon_surface_init(rdev);
rdev->accel_working = true;
- return rs690_startup(rdev);
+ r = rs690_startup(rdev);
+ if (r) {
+ rdev->accel_working = false;
+ }
+ return r;
}
int rs690_suspend(struct radeon_device *rdev)
int rv515_resume(struct radeon_device *rdev)
{
+ int r;
+
/* Make sur GART are not working */
if (rdev->flags & RADEON_IS_PCIE)
rv370_pcie_gart_disable(rdev);
radeon_surface_init(rdev);
rdev->accel_working = true;
- return rv515_startup(rdev);
+ r = rv515_startup(rdev);
+ if (r) {
+ rdev->accel_working = false;
+ }
+ return r;
}
int rv515_suspend(struct radeon_device *rdev)
r = rv770_startup(rdev);
if (r) {
DRM_ERROR("r600 startup failed on resume\n");
+ rdev->accel_working = false;
return r;
}
continue;
err = device_create_file(&client->dev, &ads1015_in[k].dev_attr);
if (err)
- goto exit_free;
+ goto exit_remove;
}
data->hwmon_dev = hwmon_device_register(&client->dev);
exit_remove:
for (k = 0; k < ADS1015_CHANNELS; ++k)
device_remove_file(&client->dev, &ads1015_in[k].dev_attr);
-exit_free:
kfree(data);
exit:
return err;
i2c_smbus_write_byte_data(client, reg + 1, (value & 0xFF));
}
+static void f75375_write_pwm(struct i2c_client *client, int nr)
+{
+ struct f75375_data *data = i2c_get_clientdata(client);
+ if (data->kind == f75387)
+ f75375_write16(client, F75375_REG_FAN_EXP(nr), data->pwm[nr]);
+ else
+ f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
+ data->pwm[nr]);
+}
+
static struct f75375_data *f75375_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
return 1500000 / rpm;
}
+static bool duty_mode_enabled(u8 pwm_enable)
+{
+ switch (pwm_enable) {
+ case 0: /* Manual, duty mode (full speed) */
+ case 1: /* Manual, duty mode */
+ case 4: /* Auto, duty mode */
+ return true;
+ case 2: /* Auto, speed mode */
+ case 3: /* Manual, speed mode */
+ return false;
+ default:
+ BUG();
+ }
+}
+
+static bool auto_mode_enabled(u8 pwm_enable)
+{
+ switch (pwm_enable) {
+ case 0: /* Manual, duty mode (full speed) */
+ case 1: /* Manual, duty mode */
+ case 3: /* Manual, speed mode */
+ return false;
+ case 2: /* Auto, speed mode */
+ case 4: /* Auto, duty mode */
+ return true;
+ default:
+ BUG();
+ }
+}
+
static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
if (err < 0)
return err;
+ if (auto_mode_enabled(data->pwm_enable[nr]))
+ return -EINVAL;
+ if (data->kind == f75387 && duty_mode_enabled(data->pwm_enable[nr]))
+ return -EINVAL;
+
mutex_lock(&data->update_lock);
data->fan_target[nr] = rpm_to_reg(val);
f75375_write16(client, F75375_REG_FAN_EXP(nr), data->fan_target[nr]);
if (err < 0)
return err;
+ if (auto_mode_enabled(data->pwm_enable[nr]) ||
+ !duty_mode_enabled(data->pwm_enable[nr]))
+ return -EINVAL;
+
mutex_lock(&data->update_lock);
data->pwm[nr] = SENSORS_LIMIT(val, 0, 255);
- f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), data->pwm[nr]);
+ f75375_write_pwm(client, nr);
mutex_unlock(&data->update_lock);
return count;
}
struct f75375_data *data = i2c_get_clientdata(client);
u8 fanmode;
- if (val < 0 || val > 3)
+ if (val < 0 || val > 4)
return -EINVAL;
fanmode = f75375_read8(client, F75375_REG_FAN_TIMER);
if (data->kind == f75387) {
+ /* For now, deny dangerous toggling of duty mode */
+ if (duty_mode_enabled(data->pwm_enable[nr]) !=
+ duty_mode_enabled(val))
+ return -EOPNOTSUPP;
/* clear each fanX_mode bit before setting them properly */
fanmode &= ~(1 << F75387_FAN_DUTY_MODE(nr));
fanmode &= ~(1 << F75387_FAN_MANU_MODE(nr));
fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
data->pwm[nr] = 255;
- f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
- data->pwm[nr]);
break;
case 1: /* PWM */
fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
break;
- case 2: /* AUTOMATIC*/
- fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
+ case 2: /* Automatic, speed mode */
break;
case 3: /* fan speed */
fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
break;
+ case 4: /* Automatic, pwm */
+ fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
+ break;
}
} else {
/* clear each fanX_mode bit before setting them properly */
case 0: /* full speed */
fanmode |= (3 << FAN_CTRL_MODE(nr));
data->pwm[nr] = 255;
- f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
- data->pwm[nr]);
break;
case 1: /* PWM */
fanmode |= (3 << FAN_CTRL_MODE(nr));
break;
case 3: /* fan speed */
break;
+ case 4: /* Automatic pwm */
+ return -EINVAL;
}
}
f75375_write8(client, F75375_REG_FAN_TIMER, fanmode);
data->pwm_enable[nr] = val;
+ if (val == 0)
+ f75375_write_pwm(client, nr);
return 0;
}
manu = ((mode >> F75387_FAN_MANU_MODE(nr)) & 1);
duty = ((mode >> F75387_FAN_DUTY_MODE(nr)) & 1);
- if (manu && duty)
- /* speed */
+ if (!manu && duty)
+ /* auto, pwm */
+ data->pwm_enable[nr] = 4;
+ else if (manu && !duty)
+ /* manual, speed */
data->pwm_enable[nr] = 3;
- else if (!manu && duty)
- /* automatic */
+ else if (!manu && !duty)
+ /* automatic, speed */
data->pwm_enable[nr] = 2;
else
- /* manual */
+ /* manual, pwm */
data->pwm_enable[nr] = 1;
} else {
if (!(conf & (1 << F75375_FAN_CTRL_LINEAR(nr))))
set_pwm_enable_direct(client, 0, f75375s_pdata->pwm_enable[0]);
set_pwm_enable_direct(client, 1, f75375s_pdata->pwm_enable[1]);
for (nr = 0; nr < 2; nr++) {
+ if (auto_mode_enabled(f75375s_pdata->pwm_enable[nr]) ||
+ !duty_mode_enabled(f75375s_pdata->pwm_enable[nr]))
+ continue;
data->pwm[nr] = SENSORS_LIMIT(f75375s_pdata->pwm[nr], 0, 255);
- f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
- data->pwm[nr]);
+ f75375_write_pwm(client, nr);
}
}
if (err)
goto exit_free;
- if (data->kind == f75375) {
+ if (data->kind != f75373) {
err = sysfs_chmod_file(&client->dev.kobj,
&sensor_dev_attr_pwm1_mode.dev_attr.attr,
S_IRUGO | S_IWUSR);
static const int rpm_ranges[] = { 2000, 4000, 8000, 16000 };
-#define FAN_FROM_REG(val, div, rpm_range) ((val) == 0 ? -1 : \
- (val) == 255 ? 0 : (rpm_ranges[rpm_range] * 30) / ((div + 1) * (val)))
+#define FAN_FROM_REG(val, rpm_range) ((val) == 0 || (val) == 255 ? \
+ 0 : (rpm_ranges[rpm_range] * 30) / (val))
#define TEMP_LIMIT_TO_REG(val) SENSORS_LIMIT((val) / 1000, 0, 255)
/*
return PTR_ERR(data);
return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index],
- data->ppr, data->rpm_range));
+ data->rpm_range));
}
static ssize_t show_alarm(struct device *dev,
struct max6639_data *data = i2c_get_clientdata(client);
struct max6639_platform_data *max6639_info =
client->dev.platform_data;
- int i = 0;
+ int i;
int rpm_range = 1; /* default: 4000 RPM */
- int err = 0;
+ int err;
/* Reset chip to default values, see below for GCONFIG setup */
err = i2c_smbus_write_byte_data(client, MAX6639_REG_GCONFIG,
else
data->ppr = 2;
data->ppr -= 1;
- err = i2c_smbus_write_byte_data(client,
- MAX6639_REG_FAN_PPR(i),
- data->ppr << 5);
- if (err)
- goto exit;
if (max6639_info)
rpm_range = rpm_range_to_reg(max6639_info->rpm_range);
for (i = 0; i < 2; i++) {
+ /* Set Fan pulse per revolution */
+ err = i2c_smbus_write_byte_data(client,
+ MAX6639_REG_FAN_PPR(i),
+ data->ppr << 6);
+ if (err)
+ goto exit;
+
/* Fans config PWM, RPM */
err = i2c_smbus_write_byte_data(client,
MAX6639_REG_FAN_CONFIG1(i),
case PMBUS_VIRT_RESET_TEMP_HISTORY:
ret = pmbus_write_word_data(client, page,
MAX34440_MFR_TEMPERATURE_PEAK,
- 0xffff);
+ 0x8000);
break;
default:
ret = -ENODATA;
#define MXS_I2C_QUEUESTAT (0x70)
#define MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY 0x00002000
+#define MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK 0x0000001F
#define MXS_I2C_QUEUECMD (0x80)
int ret;
int flags;
- init_completion(&i2c->cmd_complete);
-
dev_dbg(i2c->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
msg->addr, msg->len, msg->flags, stop);
if (msg->len == 0)
return -EINVAL;
+ init_completion(&i2c->cmd_complete);
+
flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0;
if (msg->flags & I2C_M_RD)
{
struct mxs_i2c_dev *i2c = dev_id;
u32 stat = readl(i2c->regs + MXS_I2C_CTRL1) & MXS_I2C_IRQ_MASK;
+ bool is_last_cmd;
if (!stat)
return IRQ_NONE;
else
i2c->cmd_err = 0;
- complete(&i2c->cmd_complete);
+ is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) &
+ MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0;
+
+ if (is_last_cmd || i2c->cmd_err)
+ complete(&i2c->cmd_complete);
writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR);
+
return IRQ_HANDLED;
}
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/i2c-pxa.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/of_i2c.h>
#include <linux/platform_device.h>
#include <linux/err.h>
.functionality = i2c_pxa_functionality,
};
-static int i2c_pxa_probe(struct platform_device *dev)
+static struct of_device_id i2c_pxa_dt_ids[] = {
+ { .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX },
+ { .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX },
+ { .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA2XX },
+ {}
+};
+MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids);
+
+static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c,
+ enum pxa_i2c_types *i2c_types)
{
- struct pxa_i2c *i2c;
- struct resource *res;
- struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
- const struct platform_device_id *id = platform_get_device_id(dev);
- enum pxa_i2c_types i2c_type = id->driver_data;
+ struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *of_id =
+ of_match_device(i2c_pxa_dt_ids, &pdev->dev);
int ret;
- int irq;
- res = platform_get_resource(dev, IORESOURCE_MEM, 0);
- irq = platform_get_irq(dev, 0);
- if (res == NULL || irq < 0)
- return -ENODEV;
+ if (!of_id)
+ return 1;
+ ret = of_alias_get_id(np, "i2c");
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
+ return ret;
+ }
+ pdev->id = ret;
+ if (of_get_property(np, "mrvl,i2c-polling", NULL))
+ i2c->use_pio = 1;
+ if (of_get_property(np, "mrvl,i2c-fast-mode", NULL))
+ i2c->fast_mode = 1;
+ *i2c_types = (u32)(of_id->data);
+ return 0;
+}
- if (!request_mem_region(res->start, resource_size(res), res->name))
- return -ENOMEM;
+static int i2c_pxa_probe_pdata(struct platform_device *pdev,
+ struct pxa_i2c *i2c,
+ enum pxa_i2c_types *i2c_types)
+{
+ struct i2c_pxa_platform_data *plat = pdev->dev.platform_data;
+ const struct platform_device_id *id = platform_get_device_id(pdev);
+
+ *i2c_types = id->driver_data;
+ if (plat) {
+ i2c->use_pio = plat->use_pio;
+ i2c->fast_mode = plat->fast_mode;
+ }
+ return 0;
+}
+
+static int i2c_pxa_probe(struct platform_device *dev)
+{
+ struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
+ enum pxa_i2c_types i2c_type;
+ struct pxa_i2c *i2c;
+ struct resource *res = NULL;
+ int ret, irq;
i2c = kzalloc(sizeof(struct pxa_i2c), GFP_KERNEL);
if (!i2c) {
goto emalloc;
}
+ ret = i2c_pxa_probe_dt(dev, i2c, &i2c_type);
+ if (ret > 0)
+ ret = i2c_pxa_probe_pdata(dev, i2c, &i2c_type);
+ if (ret < 0)
+ goto eclk;
+
+ res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ irq = platform_get_irq(dev, 0);
+ if (res == NULL || irq < 0) {
+ ret = -ENODEV;
+ goto eclk;
+ }
+
+ if (!request_mem_region(res->start, resource_size(res), res->name)) {
+ ret = -ENOMEM;
+ goto eclk;
+ }
+
i2c->adap.owner = THIS_MODULE;
i2c->adap.retries = 5;
i2c->slave_addr = I2C_PXA_SLAVE_ADDR;
-#ifdef CONFIG_I2C_PXA_SLAVE
if (plat) {
+#ifdef CONFIG_I2C_PXA_SLAVE
i2c->slave_addr = plat->slave_addr;
i2c->slave = plat->slave;
- }
#endif
-
- clk_enable(i2c->clk);
-
- if (plat) {
i2c->adap.class = plat->class;
- i2c->use_pio = plat->use_pio;
- i2c->fast_mode = plat->fast_mode;
}
+ clk_enable(i2c->clk);
+
if (i2c->use_pio) {
i2c->adap.algo = &i2c_pxa_pio_algorithm;
} else {
.name = "pxa2xx-i2c",
.owner = THIS_MODULE,
.pm = I2C_PXA_DEV_PM_OPS,
+ .of_match_table = i2c_pxa_dt_ids,
},
.id_table = i2c_pxa_id_table,
};
static struct platform_driver tegra_i2c_driver = {
.probe = tegra_i2c_probe,
- .remove = tegra_i2c_remove,
+ .remove = __devexit_p(tegra_i2c_remove),
#ifdef CONFIG_PM
.suspend = tegra_i2c_suspend,
.resume = tegra_i2c_resume,
obj-$(CONFIG_BLK_DEV_IDE_TX4938) += tx4938ide.o
obj-$(CONFIG_BLK_DEV_IDE_TX4939) += tx4939ide.o
-obj-$(CONFIG_BLK_DEV_IDE_AT91) += at91_ide.o
+++ /dev/null
-/*
- * IDE host driver for AT91 (SAM9, CAP9, AT572D940HF) Static Memory Controller
- * with Compact Flash True IDE logic
- *
- * Copyright (c) 2008, 2009 Kelvatek Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/ide.h>
-#include <linux/platform_device.h>
-
-#include <mach/board.h>
-#include <asm/gpio.h>
-#include <mach/at91sam9_smc.h>
-
-#define DRV_NAME "at91_ide"
-
-#define perr(fmt, args...) pr_err(DRV_NAME ": " fmt, ##args)
-#define pdbg(fmt, args...) pr_debug("%s " fmt, __func__, ##args)
-
-/*
- * Access to IDE device is possible through EBI Static Memory Controller
- * with Compact Flash logic. For details see EBI and SMC datasheet sections
- * of any microcontroller from AT91SAM9 family.
- *
- * Within SMC chip select address space, lines A[23:21] distinguish Compact
- * Flash modes (I/O, common memory, attribute memory, True IDE). IDE modes are:
- * 0x00c0000 - True IDE
- * 0x00e0000 - Alternate True IDE (Alt Status Register)
- *
- * On True IDE mode Task File and Data Register are mapped at the same address.
- * To distinguish access between these two different bus data width is used:
- * 8Bit for Task File, 16Bit for Data I/O.
- *
- * After initialization we do 8/16 bit flipping (changes in SMC MODE register)
- * only inside IDE callback routines which are serialized by IDE layer,
- * so no additional locking needed.
- */
-
-#define TASK_FILE 0x00c00000
-#define ALT_MODE 0x00e00000
-#define REGS_SIZE 8
-
-#define enter_16bit(cs, mode) do { \
- mode = at91_sys_read(AT91_SMC_MODE(cs)); \
- at91_sys_write(AT91_SMC_MODE(cs), mode | AT91_SMC_DBW_16); \
-} while (0)
-
-#define leave_16bit(cs, mode) at91_sys_write(AT91_SMC_MODE(cs), mode);
-
-static void set_smc_timings(const u8 chipselect, const u16 cycle,
- const u16 setup, const u16 pulse,
- const u16 data_float, int use_iordy)
-{
- unsigned long mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_BAT_SELECT;
-
- /* disable or enable waiting for IORDY signal */
- if (use_iordy)
- mode |= AT91_SMC_EXNWMODE_READY;
-
- /* add data float cycles if needed */
- if (data_float)
- mode |= AT91_SMC_TDF_(data_float);
-
- at91_sys_write(AT91_SMC_MODE(chipselect), mode);
-
- /* setup timings in SMC */
- at91_sys_write(AT91_SMC_SETUP(chipselect), AT91_SMC_NWESETUP_(setup) |
- AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(setup) |
- AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(chipselect), AT91_SMC_NWEPULSE_(pulse) |
- AT91_SMC_NCS_WRPULSE_(cycle) |
- AT91_SMC_NRDPULSE_(pulse) |
- AT91_SMC_NCS_RDPULSE_(cycle));
- at91_sys_write(AT91_SMC_CYCLE(chipselect), AT91_SMC_NWECYCLE_(cycle) |
- AT91_SMC_NRDCYCLE_(cycle));
-}
-
-static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz)
-{
- u64 tmp = ns;
-
- tmp *= mck_hz;
- tmp += 1000*1000*1000 - 1; /* round up */
- do_div(tmp, 1000*1000*1000);
- return (unsigned int) tmp;
-}
-
-static void apply_timings(const u8 chipselect, const u8 pio,
- const struct ide_timing *timing, int use_iordy)
-{
- unsigned int t0, t1, t2, t6z;
- unsigned int cycle, setup, pulse, data_float;
- unsigned int mck_hz;
- struct clk *mck;
-
- /* see table 22 of Compact Flash standard 4.1 for the meaning,
- * we do not stretch active (t2) time, so setup (t1) + hold time (th)
- * assure at least minimal recovery (t2i) time */
- t0 = timing->cyc8b;
- t1 = timing->setup;
- t2 = timing->act8b;
- t6z = (pio < 5) ? 30 : 20;
-
- pdbg("t0=%u t1=%u t2=%u t6z=%u\n", t0, t1, t2, t6z);
-
- mck = clk_get(NULL, "mck");
- BUG_ON(IS_ERR(mck));
- mck_hz = clk_get_rate(mck);
- pdbg("mck_hz=%u\n", mck_hz);
-
- cycle = calc_mck_cycles(t0, mck_hz);
- setup = calc_mck_cycles(t1, mck_hz);
- pulse = calc_mck_cycles(t2, mck_hz);
- data_float = calc_mck_cycles(t6z, mck_hz);
-
- pdbg("cycle=%u setup=%u pulse=%u data_float=%u\n",
- cycle, setup, pulse, data_float);
-
- set_smc_timings(chipselect, cycle, setup, pulse, data_float, use_iordy);
-}
-
-static void at91_ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
- void *buf, unsigned int len)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- u8 chipselect = hwif->select_data;
- unsigned long mode;
-
- pdbg("cs %u buf %p len %d\n", chipselect, buf, len);
-
- len++;
-
- enter_16bit(chipselect, mode);
- readsw((void __iomem *)io_ports->data_addr, buf, len / 2);
- leave_16bit(chipselect, mode);
-}
-
-static void at91_ide_output_data(ide_drive_t *drive, struct ide_cmd *cmd,
- void *buf, unsigned int len)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- u8 chipselect = hwif->select_data;
- unsigned long mode;
-
- pdbg("cs %u buf %p len %d\n", chipselect, buf, len);
-
- enter_16bit(chipselect, mode);
- writesw((void __iomem *)io_ports->data_addr, buf, len / 2);
- leave_16bit(chipselect, mode);
-}
-
-static void at91_ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct ide_timing *timing;
- u8 chipselect = hwif->select_data;
- int use_iordy = 0;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
-
- pdbg("chipselect %u pio %u\n", chipselect, pio);
-
- timing = ide_timing_find_mode(XFER_PIO_0 + pio);
- BUG_ON(!timing);
-
- if (ide_pio_need_iordy(drive, pio))
- use_iordy = 1;
-
- apply_timings(chipselect, pio, timing, use_iordy);
-}
-
-static const struct ide_tp_ops at91_ide_tp_ops = {
- .exec_command = ide_exec_command,
- .read_status = ide_read_status,
- .read_altstatus = ide_read_altstatus,
- .write_devctl = ide_write_devctl,
-
- .dev_select = ide_dev_select,
- .tf_load = ide_tf_load,
- .tf_read = ide_tf_read,
-
- .input_data = at91_ide_input_data,
- .output_data = at91_ide_output_data,
-};
-
-static const struct ide_port_ops at91_ide_port_ops = {
- .set_pio_mode = at91_ide_set_pio_mode,
-};
-
-static const struct ide_port_info at91_ide_port_info __initdata = {
- .port_ops = &at91_ide_port_ops,
- .tp_ops = &at91_ide_tp_ops,
- .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA | IDE_HFLAG_SINGLE |
- IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_UNMASK_IRQS,
- .pio_mask = ATA_PIO6,
- .chipset = ide_generic,
-};
-
-/*
- * If interrupt is delivered through GPIO, IRQ are triggered on falling
- * and rising edge of signal. Whereas IDE device request interrupt on high
- * level (rising edge in our case). This mean we have fake interrupts, so
- * we need to check interrupt pin and exit instantly from ISR when line
- * is on low level.
- */
-
-irqreturn_t at91_irq_handler(int irq, void *dev_id)
-{
- int ntries = 8;
- int pin_val1, pin_val2;
-
- /* additional deglitch, line can be noisy in badly designed PCB */
- do {
- pin_val1 = at91_get_gpio_value(irq);
- pin_val2 = at91_get_gpio_value(irq);
- } while (pin_val1 != pin_val2 && --ntries > 0);
-
- if (pin_val1 == 0 || ntries <= 0)
- return IRQ_HANDLED;
-
- return ide_intr(irq, dev_id);
-}
-
-static int __init at91_ide_probe(struct platform_device *pdev)
-{
- int ret;
- struct ide_hw hw, *hws[] = { &hw };
- struct ide_host *host;
- struct resource *res;
- unsigned long tf_base = 0, ctl_base = 0;
- struct at91_cf_data *board = pdev->dev.platform_data;
-
- if (!board)
- return -ENODEV;
-
- if (board->det_pin && at91_get_gpio_value(board->det_pin) != 0) {
- perr("no device detected\n");
- return -ENODEV;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- perr("can't get memory resource\n");
- return -ENODEV;
- }
-
- if (!devm_request_mem_region(&pdev->dev, res->start + TASK_FILE,
- REGS_SIZE, "ide") ||
- !devm_request_mem_region(&pdev->dev, res->start + ALT_MODE,
- REGS_SIZE, "alt")) {
- perr("memory resources in use\n");
- return -EBUSY;
- }
-
- pdbg("chipselect %u irq %u res %08lx\n", board->chipselect,
- board->irq_pin, (unsigned long) res->start);
-
- tf_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + TASK_FILE,
- REGS_SIZE);
- ctl_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + ALT_MODE,
- REGS_SIZE);
- if (!tf_base || !ctl_base) {
- perr("can't map memory regions\n");
- return -EBUSY;
- }
-
- memset(&hw, 0, sizeof(hw));
-
- if (board->flags & AT91_IDE_SWAP_A0_A2) {
- /* workaround for stupid hardware bug */
- hw.io_ports.data_addr = tf_base + 0;
- hw.io_ports.error_addr = tf_base + 4;
- hw.io_ports.nsect_addr = tf_base + 2;
- hw.io_ports.lbal_addr = tf_base + 6;
- hw.io_ports.lbam_addr = tf_base + 1;
- hw.io_ports.lbah_addr = tf_base + 5;
- hw.io_ports.device_addr = tf_base + 3;
- hw.io_ports.command_addr = tf_base + 7;
- hw.io_ports.ctl_addr = ctl_base + 3;
- } else
- ide_std_init_ports(&hw, tf_base, ctl_base + 6);
-
- hw.irq = board->irq_pin;
- hw.dev = &pdev->dev;
-
- host = ide_host_alloc(&at91_ide_port_info, hws, 1);
- if (!host) {
- perr("failed to allocate ide host\n");
- return -ENOMEM;
- }
-
- /* setup Static Memory Controller - PIO 0 as default */
- apply_timings(board->chipselect, 0, ide_timing_find_mode(XFER_PIO_0), 0);
-
- /* with GPIO interrupt we have to do quirks in handler */
- if (gpio_is_valid(board->irq_pin))
- host->irq_handler = at91_irq_handler;
-
- host->ports[0]->select_data = board->chipselect;
-
- ret = ide_host_register(host, &at91_ide_port_info, hws);
- if (ret) {
- perr("failed to register ide host\n");
- goto err_free_host;
- }
- platform_set_drvdata(pdev, host);
- return 0;
-
-err_free_host:
- ide_host_free(host);
- return ret;
-}
-
-static int __exit at91_ide_remove(struct platform_device *pdev)
-{
- struct ide_host *host = platform_get_drvdata(pdev);
-
- ide_host_remove(host);
- return 0;
-}
-
-static struct platform_driver at91_ide_driver = {
- .driver = {
- .name = DRV_NAME,
- .owner = THIS_MODULE,
- },
- .remove = __exit_p(at91_ide_remove),
-};
-
-static int __init at91_ide_init(void)
-{
- return platform_driver_probe(&at91_ide_driver, at91_ide_probe);
-}
-
-static void __exit at91_ide_exit(void)
-{
- platform_driver_unregister(&at91_ide_driver);
-}
-
-module_init(at91_ide_init);
-module_exit(at91_ide_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Stanislaw Gruszka <stf_xl@wp.pl>");
-
static ssize_t debug_read_regs(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
- struct omap_iommu *obj = file->private_data;
+ struct device *dev = file->private_data;
+ struct omap_iommu *obj = dev_to_omap_iommu(dev);
char *p, *buf;
ssize_t bytes;
static ssize_t debug_read_tlb(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
- struct omap_iommu *obj = file->private_data;
+ struct device *dev = file->private_data;
+ struct omap_iommu *obj = dev_to_omap_iommu(dev);
char *p, *buf;
ssize_t bytes, rest;
struct iotlb_entry e;
struct cr_regs cr;
int err;
- struct omap_iommu *obj = file->private_data;
+ struct device *dev = file->private_data;
+ struct omap_iommu *obj = dev_to_omap_iommu(dev);
char buf[MAXCOLUMN], *p = buf;
count = min(count, sizeof(buf));
static ssize_t debug_read_pagetable(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
- struct omap_iommu *obj = file->private_data;
+ struct device *dev = file->private_data;
+ struct omap_iommu *obj = dev_to_omap_iommu(dev);
char *p, *buf;
size_t bytes;
static ssize_t debug_read_mmap(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
- struct omap_iommu *obj = file->private_data;
+ struct device *dev = file->private_data;
+ struct omap_iommu *obj = dev_to_omap_iommu(dev);
char *p, *buf;
struct iovm_struct *tmp;
int uninitialized_var(i);
static ssize_t debug_read_mem(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
- struct omap_iommu *obj = file->private_data;
+ struct device *dev = file->private_data;
char *p, *buf;
struct iovm_struct *area;
ssize_t bytes;
mutex_lock(&iommu_debug_lock);
- area = omap_find_iovm_area(obj, (u32)ppos);
- if (IS_ERR(area)) {
+ area = omap_find_iovm_area(dev, (u32)ppos);
+ if (!area) {
bytes = -EINVAL;
goto err_out;
}
static ssize_t debug_write_mem(struct file *file, const char __user *userbuf,
size_t count, loff_t *ppos)
{
- struct omap_iommu *obj = file->private_data;
+ struct device *dev = file->private_data;
struct iovm_struct *area;
char *p, *buf;
goto err_out;
}
- area = omap_find_iovm_area(obj, (u32)ppos);
- if (IS_ERR(area)) {
+ area = omap_find_iovm_area(dev, (u32)ppos);
+ if (!area) {
count = -EINVAL;
goto err_out;
}
{ \
struct dentry *dent; \
dent = debugfs_create_file(#attr, mode, parent, \
- obj, &debug_##attr##_fops); \
+ dev, &debug_##attr##_fops); \
if (!dent) \
return -ENOMEM; \
}
{
struct platform_device *pdev = to_platform_device(dev);
struct omap_iommu *obj = platform_get_drvdata(pdev);
+ struct omap_iommu_arch_data *arch_data;
struct dentry *d, *parent;
if (!obj || !obj->dev)
return -EINVAL;
+ arch_data = kzalloc(sizeof(*arch_data), GFP_KERNEL);
+ if (!arch_data)
+ return -ENOMEM;
+
+ arch_data->iommu_dev = obj;
+
+ dev->archdata.iommu = arch_data;
+
d = debugfs_create_dir(obj->name, iommu_debug_root);
if (!d)
- return -ENOMEM;
+ goto nomem;
parent = d;
d = debugfs_create_u8("nr_tlb_entries", 400, parent,
(u8 *)&obj->nr_tlb_entries);
if (!d)
- return -ENOMEM;
+ goto nomem;
DEBUG_ADD_FILE_RO(ver);
DEBUG_ADD_FILE_RO(regs);
DEBUG_ADD_FILE_RO(mmap);
DEBUG_ADD_FILE(mem);
+ return 0;
+
+nomem:
+ kfree(arch_data);
+ return -ENOMEM;
+}
+
+static int iommu_debug_unregister(struct device *dev, void *data)
+{
+ if (!dev->archdata.iommu)
+ return 0;
+
+ kfree(dev->archdata.iommu);
+
+ dev->archdata.iommu = NULL;
+
return 0;
}
static void __exit iommu_debugfs_exit(void)
{
debugfs_remove_recursive(iommu_debug_root);
+ omap_foreach_iommu_device(NULL, iommu_debug_unregister);
}
module_exit(iommu_debugfs_exit)
return platform_driver_register(&omap_iommu_driver);
}
-module_init(omap_iommu_init);
+/* must be ready before omap3isp is probed */
+subsys_initcall(omap_iommu_init);
static void __exit omap_iommu_exit(void)
{
req = NULL;
spin_lock_irqsave(&state->lock, flags);
add_wait_queue(&state->wait_queue, &wait);
- current->state = TASK_INTERRUPTIBLE;
+ set_current_state(TASK_INTERRUPTIBLE);
for (;;) {
req = state->completed;
spin_lock_irqsave(&state->lock, flags);
}
- current->state = TASK_RUNNING;
+ set_current_state(TASK_RUNNING);
remove_wait_queue(&state->wait_queue, &wait);
spin_unlock_irqrestore(&state->lock, flags);
menu "Texas Instruments WL128x FM driver (ST based)"
config RADIO_WL128X
tristate "Texas Instruments WL128x FM Radio"
- depends on VIDEO_V4L2 && RFKILL
- select TI_ST if NET && GPIOLIB
+ depends on VIDEO_V4L2 && RFKILL && GPIOLIB
+ select TI_ST if NET
help
Choose Y here if you have this FM radio chip.
#define MOD_AUTHOR "Jarod Wilson <jarod@wilsonet.com>"
#define MOD_DESC "Driver for SoundGraph iMON MultiMedia IR/Display"
#define MOD_NAME "imon"
-#define MOD_VERSION "0.9.3"
+#define MOD_VERSION "0.9.4"
#define DISPLAY_MINOR_BASE 144
#define DEVICE_NAME "lcd%d"
return;
ictx = (struct imon_context *)urb->context;
- if (!ictx || !ictx->dev_present_intf0)
+ if (!ictx)
return;
+ /*
+ * if we get a callback before we're done configuring the hardware, we
+ * can't yet process the data, as there's nowhere to send it, but we
+ * still need to submit a new rx URB to avoid wedging the hardware
+ */
+ if (!ictx->dev_present_intf0)
+ goto out;
+
switch (urb->status) {
case -ENOENT: /* usbcore unlink successful! */
return;
break;
}
+out:
usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC);
}
return;
ictx = (struct imon_context *)urb->context;
- if (!ictx || !ictx->dev_present_intf1)
+ if (!ictx)
return;
+ /*
+ * if we get a callback before we're done configuring the hardware, we
+ * can't yet process the data, as there's nowhere to send it, but we
+ * still need to submit a new rx URB to avoid wedging the hardware
+ */
+ if (!ictx->dev_present_intf1)
+ goto out;
+
switch (urb->status) {
case -ENOENT: /* usbcore unlink successful! */
return;
break;
}
+out:
usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC);
}
mutex_unlock(&ictx->lock);
usb_free_urb(rx_urb);
rx_urb_alloc_failed:
- dev_err(ictx->dev, "unable to initialize intf0, err %d\n", ret);
+ dev_err(ictx->dev, "unable to initialize intf1, err %d\n", ret);
return NULL;
}
}
#endif
+ dev->fw_ver = dev->usbc_buf[1];
+
v4l2_info(&dev->v4l2_dev, "firmware version 0x%x dated %s\n",
- dev->usbc_buf[1], &dev->usbc_buf[2]);
+ dev->fw_ver, &dev->usbc_buf[2]);
+
+ if (dev->fw_ver > 0x15) {
+ dev->options.brightness = 0x80;
+ dev->options.contrast = 0x40;
+ dev->options.hue = 0xf;
+ dev->options.saturation = 0x40;
+ dev->options.sharpness = 0x80;
+ }
- switch (dev->usbc_buf[1]) {
+ switch (dev->fw_ver) {
case HDPVR_FIRMWARE_VERSION:
dev->flags &= ~HDPVR_FLAG_AC3_CAP;
break;
default:
v4l2_info(&dev->v4l2_dev, "untested firmware, the driver might"
" not work.\n");
- if (dev->usbc_buf[1] >= HDPVR_FIRMWARE_VERSION_AC3)
+ if (dev->fw_ver >= HDPVR_FIRMWARE_VERSION_AC3)
dev->flags |= HDPVR_FLAG_AC3_CAP;
else
dev->flags &= ~HDPVR_FLAG_AC3_CAP;
.bitrate_mode = HDPVR_CONSTANT,
.gop_mode = HDPVR_SIMPLE_IDR_GOP,
.audio_codec = V4L2_MPEG_AUDIO_ENCODING_AAC,
+ /* original picture controls for firmware version <= 0x15 */
+ /* updated in device_authorization() for newer firmware */
.brightness = 0x86,
.contrast = 0x80,
.hue = 0x80,
hdpvr_config_call(dev, CTRL_START_STREAMING_VALUE, 0x00);
+ dev->status = STATUS_STREAMING;
+
INIT_WORK(&dev->worker, hdpvr_transmit_buffers);
queue_work(dev->workqueue, &dev->worker);
v4l2_dbg(MSG_BUFFER, hdpvr_debug, &dev->v4l2_dev,
"streaming started\n");
- dev->status = STATUS_STREAMING;
return 0;
}
};
static int fill_queryctrl(struct hdpvr_options *opt, struct v4l2_queryctrl *qc,
- int ac3)
+ int ac3, int fw_ver)
{
int err;
+ if (fw_ver > 0x15) {
+ switch (qc->id) {
+ case V4L2_CID_BRIGHTNESS:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+ case V4L2_CID_CONTRAST:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x40);
+ case V4L2_CID_SATURATION:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x40);
+ case V4L2_CID_HUE:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0x1e, 1, 0xf);
+ case V4L2_CID_SHARPNESS:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+ }
+ } else {
+ switch (qc->id) {
+ case V4L2_CID_BRIGHTNESS:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x86);
+ case V4L2_CID_CONTRAST:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+ case V4L2_CID_SATURATION:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+ case V4L2_CID_HUE:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+ case V4L2_CID_SHARPNESS:
+ return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
+ }
+ }
+
switch (qc->id) {
- case V4L2_CID_BRIGHTNESS:
- return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x86);
- case V4L2_CID_CONTRAST:
- return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
- case V4L2_CID_SATURATION:
- return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
- case V4L2_CID_HUE:
- return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
- case V4L2_CID_SHARPNESS:
- return v4l2_ctrl_query_fill(qc, 0x0, 0xff, 1, 0x80);
case V4L2_CID_MPEG_AUDIO_ENCODING:
return v4l2_ctrl_query_fill(
qc, V4L2_MPEG_AUDIO_ENCODING_AAC,
if (qc->id == supported_v4l2_ctrls[i])
return fill_queryctrl(&dev->options, qc,
- dev->flags & HDPVR_FLAG_AC3_CAP);
+ dev->flags & HDPVR_FLAG_AC3_CAP,
+ dev->fw_ver);
if (qc->id < supported_v4l2_ctrls[i])
break;
/* usb control transfer buffer and lock */
struct mutex usbc_mutex;
u8 *usbc_buf;
+ u8 fw_ver;
};
static inline struct hdpvr_device *to_hdpvr_dev(struct v4l2_device *v4l2_dev)
static void ccdc_hs_vs_isr(struct isp_ccdc_device *ccdc)
{
struct isp_pipeline *pipe = to_isp_pipeline(&ccdc->subdev.entity);
- struct video_device *vdev = &ccdc->subdev.devnode;
+ struct video_device *vdev = ccdc->subdev.devnode;
struct v4l2_event event;
memset(&event, 0, sizeof(event));
md->power_ro_lock.show = power_ro_lock_show;
md->power_ro_lock.store = power_ro_lock_store;
+ sysfs_attr_init(&md->power_ro_lock.attr);
md->power_ro_lock.attr.mode = mode;
md->power_ro_lock.attr.name =
"ro_lock_until_next_power_on";
static void mmc_pre_req(struct mmc_host *host, struct mmc_request *mrq,
bool is_first_req)
{
- if (host->ops->pre_req)
+ if (host->ops->pre_req) {
+ mmc_host_clk_hold(host);
host->ops->pre_req(host, mrq, is_first_req);
+ mmc_host_clk_release(host);
+ }
}
/**
static void mmc_post_req(struct mmc_host *host, struct mmc_request *mrq,
int err)
{
- if (host->ops->post_req)
+ if (host->ops->post_req) {
+ mmc_host_clk_hold(host);
host->ops->post_req(host, mrq, err);
+ mmc_host_clk_release(host);
+ }
}
/**
int err;
host->en_dis_recurs = 1;
+ mmc_host_clk_hold(host);
err = host->ops->enable(host);
+ mmc_host_clk_release(host);
host->en_dis_recurs = 0;
if (err) {
int err;
host->en_dis_recurs = 1;
+ mmc_host_clk_hold(host);
err = host->ops->disable(host, lazy);
+ mmc_host_clk_release(host);
host->en_dis_recurs = 0;
if (err < 0) {
* might not allow this operation
*/
voltage = regulator_get_voltage(supply);
+
+ if (mmc->caps2 & MMC_CAP2_BROKEN_VOLTAGE)
+ min_uV = max_uV = voltage;
+
if (voltage < 0)
result = voltage;
else if (voltage < min_uV || voltage > max_uV)
host->ios.signal_voltage = signal_voltage;
- if (host->ops->start_signal_voltage_switch)
+ if (host->ops->start_signal_voltage_switch) {
+ mmc_host_clk_hold(host);
err = host->ops->start_signal_voltage_switch(host, &host->ios);
+ mmc_host_clk_release(host);
+ }
return err;
}
int err = 0;
card = host->card;
+ mmc_claim_host(host);
/*
* Send power notify command only if card
/* Set the card state to no notification after the poweroff */
card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION;
}
+ mmc_release_host(host);
}
/*
void mmc_power_off(struct mmc_host *host)
{
+ int err = 0;
mmc_host_clk_hold(host);
host->ios.clock = 0;
host->ios.vdd = 0;
- mmc_poweroff_notify(host);
+ /*
+ * For eMMC 4.5 device send AWAKE command before
+ * POWER_OFF_NOTIFY command, because in sleep state
+ * eMMC 4.5 devices respond to only RESET and AWAKE cmd
+ */
+ if (host->card && mmc_card_is_sleep(host->card) &&
+ host->bus_ops->resume) {
+ err = host->bus_ops->resume(host);
+
+ if (!err)
+ mmc_poweroff_notify(host);
+ else
+ pr_warning("%s: error %d during resume "
+ "(continue with poweroff sequence)\n",
+ mmc_hostname(host), err);
+ }
/*
* Reset ocr mask to be the highest possible voltage supported for
*/
if (mmc_try_claim_host(host)) {
if (host->bus_ops->suspend) {
- /*
- * For eMMC 4.5 device send notify command
- * before sleep, because in sleep state eMMC 4.5
- * devices respond to only RESET and AWAKE cmd
- */
- mmc_poweroff_notify(host);
err = host->bus_ops->suspend(host);
}
mmc_do_release_host(host);
int mmc_register_host_class(void);
void mmc_unregister_host_class(void);
-
-#ifdef CONFIG_MMC_CLKGATE
-void mmc_host_clk_hold(struct mmc_host *host);
-void mmc_host_clk_release(struct mmc_host *host);
-unsigned int mmc_host_clk_rate(struct mmc_host *host);
-
-#else
-static inline void mmc_host_clk_hold(struct mmc_host *host)
-{
-}
-
-static inline void mmc_host_clk_release(struct mmc_host *host)
-{
-}
-
-static inline unsigned int mmc_host_clk_rate(struct mmc_host *host)
-{
- return host->ios.clock;
-}
-#endif
-
void mmc_host_deeper_disable(struct work_struct *work);
#endif
}
card->ext_csd.raw_hc_erase_gap_size =
- ext_csd[EXT_CSD_PARTITION_ATTRIBUTE];
+ ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
card->ext_csd.raw_sec_trim_mult =
ext_csd[EXT_CSD_SEC_TRIM_MULT];
card->ext_csd.raw_sec_erase_mult =
goto out;
/* only compare read only fields */
- err = (!(card->ext_csd.raw_partition_support ==
+ err = !((card->ext_csd.raw_partition_support ==
bw_ext_csd[EXT_CSD_PARTITION_SUPPORT]) &&
(card->ext_csd.raw_erased_mem_count ==
bw_ext_csd[EXT_CSD_ERASED_MEM_CONT]) &&
err = mmc_select_hs200(card);
else if (host->caps & MMC_CAP_MMC_HIGHSPEED)
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_HS_TIMING, 1, 0);
+ EXT_CSD_HS_TIMING, 1,
+ card->ext_csd.generic_cmd6_time);
if (err && err != -EBADMSG)
goto free_card;
* Activate wide bus and DDR (if supported).
*/
if (!mmc_card_hs200(card) &&
- (card->csd.mmca_vsn >= CSD_SPEC_VER_3) &&
+ (card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
(host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) {
static unsigned ext_csd_bits[][2] = {
{ EXT_CSD_BUS_WIDTH_8, EXT_CSD_DDR_BUS_WIDTH_8 },
BUG_ON(!host->card);
mmc_claim_host(host);
- if (mmc_card_can_sleep(host))
+ if (mmc_card_can_sleep(host)) {
err = mmc_card_sleep(host);
- else if (!mmc_host_is_spi(host))
+ if (!err)
+ mmc_card_set_sleep(host->card);
+ } else if (!mmc_host_is_spi(host))
mmc_deselect_cards(host);
- host->card->state &= ~MMC_STATE_HIGHSPEED;
+ host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
mmc_release_host(host);
return err;
BUG_ON(!host->card);
mmc_claim_host(host);
- err = mmc_init_card(host, host->ocr, host->card);
+ if (mmc_card_is_sleep(host->card)) {
+ err = mmc_card_awake(host);
+ mmc_card_clr_sleep(host->card);
+ } else
+ err = mmc_init_card(host, host->ocr, host->card);
mmc_release_host(host);
return err;
{
int ret;
- host->card->state &= ~MMC_STATE_HIGHSPEED;
+ host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
+ mmc_card_clr_sleep(host->card);
mmc_claim_host(host);
ret = mmc_init_card(host, host->ocr, host->card);
mmc_release_host(host);
* information and let the hardware specific code
* return what is possible given the options
*/
+ mmc_host_clk_hold(card->host);
drive_strength = card->host->ops->select_drive_strength(
card->sw_caps.uhs_max_dtr,
host_drv_type, card_drv_type);
+ mmc_host_clk_release(card->host);
err = mmc_sd_switch(card, 1, 2, drive_strength, status);
if (err)
goto out;
/* SPI mode doesn't define CMD19 */
- if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning)
+ if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning) {
+ mmc_host_clk_hold(card->host);
err = card->host->ops->execute_tuning(card->host,
MMC_SEND_TUNING_BLOCK);
+ mmc_host_clk_release(card->host);
+ }
out:
kfree(status);
if (!reinit) {
int ro = -1;
- if (host->ops->get_ro)
+ if (host->ops->get_ro) {
+ mmc_host_clk_hold(card->host);
ro = host->ops->get_ro(host);
+ mmc_host_clk_release(card->host);
+ }
if (ro < 0) {
pr_warning("%s: host does not "
* Since initialization is now complete, enable preset
* value registers for UHS-I cards.
*/
- if (host->ops->enable_preset_value)
+ if (host->ops->enable_preset_value) {
+ mmc_host_clk_hold(card->host);
host->ops->enable_preset_value(host, true);
+ mmc_host_clk_release(card->host);
+ }
} else {
/*
* Attempt to change to high-speed (if supported)
return err;
/* Disable preset value enable if already set since last time */
- if (host->ops->enable_preset_value)
+ if (host->ops->enable_preset_value) {
+ mmc_host_clk_hold(host);
host->ops->enable_preset_value(host, false);
+ mmc_host_clk_release(host);
+ }
err = mmc_send_app_op_cond(host, 0, &ocr);
if (err)
return ret;
}
-static int sdio_read_cccr(struct mmc_card *card)
+static int sdio_read_cccr(struct mmc_card *card, u32 ocr)
{
int ret;
int cccr_vsn;
+ int uhs = ocr & R4_18V_PRESENT;
unsigned char data;
unsigned char speed;
card->scr.sda_spec3 = 0;
card->sw_caps.sd3_bus_mode = 0;
card->sw_caps.sd3_drv_type = 0;
- if (cccr_vsn >= SDIO_CCCR_REV_3_00) {
+ if (cccr_vsn >= SDIO_CCCR_REV_3_00 && uhs) {
card->scr.sda_spec3 = 1;
ret = mmc_io_rw_direct(card, 0, 0,
SDIO_CCCR_UHS, 0, &data);
/*
* Read the common registers.
*/
- err = sdio_read_cccr(card);
+ err = sdio_read_cccr(card, ocr);
if (err)
goto remove;
}
set_current_state(TASK_INTERRUPTIBLE);
- if (host->caps & MMC_CAP_SDIO_IRQ)
+ if (host->caps & MMC_CAP_SDIO_IRQ) {
+ mmc_host_clk_hold(host);
host->ops->enable_sdio_irq(host, 1);
+ mmc_host_clk_release(host);
+ }
if (!kthread_should_stop())
schedule_timeout(period);
set_current_state(TASK_RUNNING);
} while (!kthread_should_stop());
- if (host->caps & MMC_CAP_SDIO_IRQ)
+ if (host->caps & MMC_CAP_SDIO_IRQ) {
+ mmc_host_clk_hold(host);
host->ops->enable_sdio_irq(host, 0);
+ mmc_host_clk_release(host);
+ }
pr_debug("%s: IRQ thread exiting with code %d\n",
mmc_hostname(host), ret);
host->data_status = 0;
if (host->need_reset) {
+ iflags = atmci_readl(host, ATMCI_IMR);
+ iflags &= (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB);
atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
atmci_writel(host, ATMCI_MR, host->mode_reg);
if (host->caps.has_cfg_reg)
atmci_writel(host, ATMCI_CFG, host->cfg_reg);
+ atmci_writel(host, ATMCI_IER, iflags);
host->need_reset = false;
}
atmci_writel(host, ATMCI_SDCR, slot->sdc_reg);
#include <linux/ioport.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/scatterlist.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/stat.h>
host->dir_status = DW_MCI_SEND_STATUS;
if (dw_mci_submit_data_dma(host, data)) {
+ int flags = SG_MITER_ATOMIC;
+ if (host->data->flags & MMC_DATA_READ)
+ flags |= SG_MITER_TO_SG;
+ else
+ flags |= SG_MITER_FROM_SG;
+
+ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
host->sg = data->sg;
- host->pio_offset = 0;
host->part_buf_start = 0;
host->part_buf_count = 0;
* generates a block interrupt, hence setting
* the scatter-gather pointer to NULL.
*/
+ sg_miter_stop(&host->sg_miter);
host->sg = NULL;
ctrl = mci_readl(host, CTRL);
ctrl |= SDMMC_CTRL_FIFO_RESET;
static void dw_mci_read_data_pio(struct dw_mci *host)
{
- struct scatterlist *sg = host->sg;
- void *buf = sg_virt(sg);
- unsigned int offset = host->pio_offset;
+ struct sg_mapping_iter *sg_miter = &host->sg_miter;
+ void *buf;
+ unsigned int offset;
struct mmc_data *data = host->data;
int shift = host->data_shift;
u32 status;
unsigned int nbytes = 0, len;
+ unsigned int remain, fcnt;
do {
- len = host->part_buf_count +
- (SDMMC_GET_FCNT(mci_readl(host, STATUS)) << shift);
- if (offset + len <= sg->length) {
+ if (!sg_miter_next(sg_miter))
+ goto done;
+
+ host->sg = sg_miter->__sg;
+ buf = sg_miter->addr;
+ remain = sg_miter->length;
+ offset = 0;
+
+ do {
+ fcnt = (SDMMC_GET_FCNT(mci_readl(host, STATUS))
+ << shift) + host->part_buf_count;
+ len = min(remain, fcnt);
+ if (!len)
+ break;
dw_mci_pull_data(host, (void *)(buf + offset), len);
-
offset += len;
nbytes += len;
-
- if (offset == sg->length) {
- flush_dcache_page(sg_page(sg));
- host->sg = sg = sg_next(sg);
- if (!sg)
- goto done;
-
- offset = 0;
- buf = sg_virt(sg);
- }
- } else {
- unsigned int remaining = sg->length - offset;
- dw_mci_pull_data(host, (void *)(buf + offset),
- remaining);
- nbytes += remaining;
-
- flush_dcache_page(sg_page(sg));
- host->sg = sg = sg_next(sg);
- if (!sg)
- goto done;
-
- offset = len - remaining;
- buf = sg_virt(sg);
- dw_mci_pull_data(host, buf, offset);
- nbytes += offset;
- }
+ remain -= len;
+ } while (remain);
+ sg_miter->consumed = offset;
status = mci_readl(host, MINTSTS);
mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
if (status & DW_MCI_DATA_ERROR_FLAGS) {
host->data_status = status;
data->bytes_xfered += nbytes;
+ sg_miter_stop(sg_miter);
+ host->sg = NULL;
smp_wmb();
set_bit(EVENT_DATA_ERROR, &host->pending_events);
return;
}
} while (status & SDMMC_INT_RXDR); /*if the RXDR is ready read again*/
- host->pio_offset = offset;
data->bytes_xfered += nbytes;
+
+ if (!remain) {
+ if (!sg_miter_next(sg_miter))
+ goto done;
+ sg_miter->consumed = 0;
+ }
+ sg_miter_stop(sg_miter);
return;
done:
data->bytes_xfered += nbytes;
+ sg_miter_stop(sg_miter);
+ host->sg = NULL;
smp_wmb();
set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
}
static void dw_mci_write_data_pio(struct dw_mci *host)
{
- struct scatterlist *sg = host->sg;
- void *buf = sg_virt(sg);
- unsigned int offset = host->pio_offset;
+ struct sg_mapping_iter *sg_miter = &host->sg_miter;
+ void *buf;
+ unsigned int offset;
struct mmc_data *data = host->data;
int shift = host->data_shift;
u32 status;
unsigned int nbytes = 0, len;
+ unsigned int fifo_depth = host->fifo_depth;
+ unsigned int remain, fcnt;
do {
- len = ((host->fifo_depth -
- SDMMC_GET_FCNT(mci_readl(host, STATUS))) << shift)
- - host->part_buf_count;
- if (offset + len <= sg->length) {
+ if (!sg_miter_next(sg_miter))
+ goto done;
+
+ host->sg = sg_miter->__sg;
+ buf = sg_miter->addr;
+ remain = sg_miter->length;
+ offset = 0;
+
+ do {
+ fcnt = ((fifo_depth -
+ SDMMC_GET_FCNT(mci_readl(host, STATUS)))
+ << shift) - host->part_buf_count;
+ len = min(remain, fcnt);
+ if (!len)
+ break;
host->push_data(host, (void *)(buf + offset), len);
-
offset += len;
nbytes += len;
- if (offset == sg->length) {
- host->sg = sg = sg_next(sg);
- if (!sg)
- goto done;
-
- offset = 0;
- buf = sg_virt(sg);
- }
- } else {
- unsigned int remaining = sg->length - offset;
-
- host->push_data(host, (void *)(buf + offset),
- remaining);
- nbytes += remaining;
-
- host->sg = sg = sg_next(sg);
- if (!sg)
- goto done;
-
- offset = len - remaining;
- buf = sg_virt(sg);
- host->push_data(host, (void *)buf, offset);
- nbytes += offset;
- }
+ remain -= len;
+ } while (remain);
+ sg_miter->consumed = offset;
status = mci_readl(host, MINTSTS);
mci_writel(host, RINTSTS, SDMMC_INT_TXDR);
if (status & DW_MCI_DATA_ERROR_FLAGS) {
host->data_status = status;
data->bytes_xfered += nbytes;
+ sg_miter_stop(sg_miter);
+ host->sg = NULL;
smp_wmb();
return;
}
} while (status & SDMMC_INT_TXDR); /* if TXDR write again */
- host->pio_offset = offset;
data->bytes_xfered += nbytes;
+
+ if (!remain) {
+ if (!sg_miter_next(sg_miter))
+ goto done;
+ sg_miter->consumed = 0;
+ }
+ sg_miter_stop(sg_miter);
return;
done:
data->bytes_xfered += nbytes;
+ sg_miter_stop(sg_miter);
+ host->sg = NULL;
smp_wmb();
set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
}
* block interrupt, hence setting the
* scatter-gather pointer to NULL.
*/
+ sg_miter_stop(&host->sg_miter);
host->sg = NULL;
ctrl = mci_readl(host, CTRL);
const int j = i * 2;
u32 mask;
- mask = mmc_vddrange_to_ocrmask(voltage_ranges[j],
- voltage_ranges[j + 1]);
+ mask = mmc_vddrange_to_ocrmask(be32_to_cpu(voltage_ranges[j]),
+ be32_to_cpu(voltage_ranges[j + 1]));
if (!mask) {
ret = -EINVAL;
dev_err(dev, "OF: voltage-range #%d is invalid\n", i);
int base = reg & ~0x3;
int shift = (reg & 0x3) * 8;
u8 ret = (in_be32(host->ioaddr + base) >> shift) & 0xff;
+
+ /*
+ * "DMA select" locates at offset 0x28 in SD specification, but on
+ * P5020 or P3041, it locates at 0x29.
+ */
+ if (reg == SDHCI_HOST_CONTROL) {
+ u32 dma_bits;
+
+ dma_bits = in_be32(host->ioaddr + reg);
+ /* DMA select is 22,23 bits in Protocol Control Register */
+ dma_bits = (dma_bits >> 5) & SDHCI_CTRL_DMA_MASK;
+
+ /* fixup the result */
+ ret &= ~SDHCI_CTRL_DMA_MASK;
+ ret |= dma_bits;
+ }
+
return ret;
}
static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg)
{
+ /*
+ * "DMA select" location is offset 0x28 in SD specification, but on
+ * P5020 or P3041, it's located at 0x29.
+ */
+ if (reg == SDHCI_HOST_CONTROL) {
+ u32 dma_bits;
+
+ /* DMA select is 22,23 bits in Protocol Control Register */
+ dma_bits = (val & SDHCI_CTRL_DMA_MASK) << 5;
+ clrsetbits_be32(host->ioaddr + reg , SDHCI_CTRL_DMA_MASK << 5,
+ dma_bits);
+ val &= ~SDHCI_CTRL_DMA_MASK;
+ val |= in_be32(host->ioaddr + reg) & SDHCI_CTRL_DMA_MASK;
+ }
+
/* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */
if (reg == SDHCI_HOST_CONTROL)
val &= ~ESDHC_HOST_CONTROL_RES;
static int mfd_sdio_probe_slot(struct sdhci_pci_slot *slot)
{
- slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD;
+ slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE;
return 0;
}
* sdhci-pltfm.c Support for SDHCI platform devices
* Copyright (c) 2009 Intel Corporation
*
- * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2007, 2011 Freescale Semiconductor, Inc.
* Copyright (c) 2009 MontaVista Software, Inc.
*
* Authors: Xiaobo Xie <X.Xie@freescale.com>
if (sdhci_of_wp_inverted(np))
host->quirks |= SDHCI_QUIRK_INVERTED_WRITE_PROTECT;
+ if (of_device_is_compatible(np, "fsl,p2020-rev1-esdhc"))
+ host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
+
+ if (of_device_is_compatible(np, "fsl,p2020-esdhc") ||
+ of_device_is_compatible(np, "fsl,p1010-esdhc") ||
+ of_device_is_compatible(np, "fsl,mpc8536-esdhc"))
+ host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+
clk = of_get_property(np, "clock-frequency", &size);
if (clk && size == sizeof(*clk) && *clk)
pltfm_host->clock = be32_to_cpup(clk);
if (ret < 0)
goto clean_up2;
- mmc_add_host(mmc);
+ INIT_DELAYED_WORK(&host->timeout_work, mmcif_timeout_work);
sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL);
}
ret = request_threaded_irq(irq[1], sh_mmcif_intr, sh_mmcif_irqt, 0, "sh_mmc:int", host);
if (ret) {
- free_irq(irq[0], host);
dev_err(&pdev->dev, "request_irq error (sh_mmc:int)\n");
- goto clean_up3;
+ goto clean_up4;
}
- INIT_DELAYED_WORK(&host->timeout_work, mmcif_timeout_work);
-
- mmc_detect_change(host->mmc, 0);
+ ret = mmc_add_host(mmc);
+ if (ret < 0)
+ goto clean_up5;
dev_info(&pdev->dev, "driver version %s\n", DRIVER_VERSION);
dev_dbg(&pdev->dev, "chip ver H'%04x\n",
sh_mmcif_readl(host->addr, MMCIF_CE_VERSION) & 0x0000ffff);
return ret;
+clean_up5:
+ free_irq(irq[1], host);
+clean_up4:
+ free_irq(irq[0], host);
clean_up3:
- mmc_remove_host(mmc);
pm_runtime_suspend(&pdev->dev);
clean_up2:
pm_runtime_disable(&pdev->dev);
#include <linux/mmc/tmio.h>
#include <linux/mutex.h>
#include <linux/pagemap.h>
-#include <linux/spinlock.h>
#include <linux/scatterlist.h>
+#include <linux/spinlock.h>
/* Definitions for values the CTRL_SDIO_STATUS register can take. */
#define TMIO_SDIO_STAT_IOIRQ 0x0001
void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable);
void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdata);
void tmio_mmc_release_dma(struct tmio_mmc_host *host);
+void tmio_mmc_abort_dma(struct tmio_mmc_host *host);
#else
static inline void tmio_mmc_start_dma(struct tmio_mmc_host *host,
struct mmc_data *data)
static inline void tmio_mmc_release_dma(struct tmio_mmc_host *host)
{
}
+
+static inline void tmio_mmc_abort_dma(struct tmio_mmc_host *host)
+{
+}
#endif
#ifdef CONFIG_PM
#endif
}
+void tmio_mmc_abort_dma(struct tmio_mmc_host *host)
+{
+ tmio_mmc_enable_dma(host, false);
+
+ if (host->chan_rx)
+ dmaengine_terminate_all(host->chan_rx);
+ if (host->chan_tx)
+ dmaengine_terminate_all(host->chan_tx);
+
+ tmio_mmc_enable_dma(host, true);
+}
+
static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host)
{
struct scatterlist *sg = host->sg_ptr, *sg_tmp;
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/scatterlist.h>
-#include <linux/workqueue.h>
#include <linux/spinlock.h>
+#include <linux/workqueue.h>
#include "tmio_mmc.h"
/* Ready for new calls */
host->mrq = NULL;
+ tmio_mmc_abort_dma(host);
mmc_request_done(host->mmc, mrq);
}
host->mrq = NULL;
spin_unlock_irqrestore(&host->lock, flags);
+ if (mrq->cmd->error || (mrq->data && mrq->data->error))
+ tmio_mmc_abort_dma(host);
+
mmc_request_done(host->mmc, mrq);
}
spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
}
+static int sja1000_is_absent(struct sja1000_priv *priv)
+{
+ return (priv->read_reg(priv, REG_MOD) == 0xFF);
+}
+
static int sja1000_probe_chip(struct net_device *dev)
{
struct sja1000_priv *priv = netdev_priv(dev);
- if (priv->reg_base && (priv->read_reg(priv, 0) == 0xFF)) {
+ if (priv->reg_base && sja1000_is_absent(priv)) {
printk(KERN_INFO "%s: probing @0x%lX failed\n",
DRV_NAME, dev->base_addr);
return 0;
while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) {
n++;
status = priv->read_reg(priv, REG_SR);
+ /* check for absent controller due to hw unplug */
+ if (status == 0xFF && sja1000_is_absent(priv))
+ return IRQ_NONE;
if (isrc & IRQ_WUI)
dev_warn(dev->dev.parent, "wakeup interrupt\n");
while (status & SR_RBS) {
sja1000_rx(dev);
status = priv->read_reg(priv, REG_SR);
+ /* check for absent controller */
+ if (status == 0xFF && sja1000_is_absent(priv))
+ return IRQ_NONE;
}
}
if (isrc & (IRQ_DOI | IRQ_EI | IRQ_BEI | IRQ_EPI | IRQ_ALI)) {
ok = 1;
}
- if (!netif_carrier_ok(dev))
+ if (dev->flags & IFF_SLAVE || !netif_carrier_ok(dev))
next_tick = 5*HZ;
if (vp->medialock)
dev_info(&adapter->pdev->dev, "tx locked\n");
return NETDEV_TX_LOCKED;
}
- if (skb->mark == 0x01)
- type = atl1c_trans_high;
- else
- type = atl1c_trans_normal;
if (atl1c_tpd_avail(adapter, type) < tpd_req) {
/* no enough descriptor, just stop queue */
return err;
}
-static inline void __exit b44_pci_exit(void)
+static inline void b44_pci_exit(void)
{
#ifdef CONFIG_B44_PCI
ssb_pcihost_unregister(&b44_pci_driver);
if (priv->has_phy) {
/* connect to PHY */
snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
- priv->mac_id ? "1" : "0", priv->phy_id);
+ priv->mii_bus->id, priv->phy_id);
phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link, 0,
PHY_INTERFACE_MODE_MII);
module_param(dropless_fc, int, 0);
MODULE_PARM_DESC(dropless_fc, " Pause on exhausted host ring");
-static int poll;
-module_param(poll, int, 0);
-MODULE_PARM_DESC(poll, " Use polling (for debug)");
-
static int mrrs = -1;
module_param(mrrs, int, 0);
MODULE_PARM_DESC(mrrs, " Force Max Read Req Size (0..3) (for debug)");
static void bnx2x_timer(unsigned long data)
{
- u8 cos;
struct bnx2x *bp = (struct bnx2x *) data;
if (!netif_running(bp->dev))
return;
- if (poll) {
- struct bnx2x_fastpath *fp = &bp->fp[0];
-
- for_each_cos_in_tx_queue(fp, cos)
- bnx2x_tx_int(bp, &fp->txdata[cos]);
- bnx2x_rx_int(fp, 1000);
- }
-
if (!BP_NOMCP(bp)) {
int mb_idx = BP_FW_MB_IDX(bp);
u32 drv_pulse;
static int __devinit bnx2x_init_bp(struct bnx2x *bp)
{
int func;
- int timer_interval;
int rc;
mutex_init(&bp->port.phy_mutex);
bp->tx_ticks = (50 / BNX2X_BTR) * BNX2X_BTR;
bp->rx_ticks = (25 / BNX2X_BTR) * BNX2X_BTR;
- timer_interval = (CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ);
- bp->current_interval = (poll ? poll : timer_interval);
+ bp->current_interval = CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ;
init_timer(&bp->timer);
bp->timer.expires = jiffies + bp->current_interval;
estats->rx_stat_ifhcinbadoctets_lo);
ADD_64(fstats->total_bytes_received_hi,
- tfunc->rcv_error_bytes.hi,
+ le32_to_cpu(tfunc->rcv_error_bytes.hi),
fstats->total_bytes_received_lo,
- tfunc->rcv_error_bytes.lo);
+ le32_to_cpu(tfunc->rcv_error_bytes.lo));
memcpy(estats, &(fstats->total_bytes_received_hi),
sizeof(struct host_func_stats) - 2*sizeof(u32));
ADD_64(estats->error_bytes_received_hi,
- tfunc->rcv_error_bytes.hi,
+ le32_to_cpu(tfunc->rcv_error_bytes.hi),
estats->error_bytes_received_lo,
- tfunc->rcv_error_bytes.lo);
+ le32_to_cpu(tfunc->rcv_error_bytes.lo));
ADD_64(estats->etherstatsoverrsizepkts_hi,
estats->rx_stat_dot3statsframestoolong_hi,
fl6.flowi6_oif = dst_addr->sin6_scope_id;
*dst = ip6_route_output(&init_net, NULL, &fl6);
- if (*dst)
+ if ((*dst)->error) {
+ dst_release(*dst);
+ *dst = NULL;
+ return -ENETUNREACH;
+ } else
return 0;
#endif
CQ_ENET_RQ_DESC_FCOE_FC_CRC_OK) ? 1 : 0;
*fcoe_enc_error = (desc->flags &
CQ_ENET_RQ_DESC_FCOE_ENC_ERROR) ? 1 : 0;
- *fcoe_eof = (u8)((desc->checksum_fcoe >>
+ *fcoe_eof = (u8)((le16_to_cpu(desc->checksum_fcoe) >>
CQ_ENET_RQ_DESC_FCOE_EOF_SHIFT) &
CQ_ENET_RQ_DESC_FCOE_EOF_MASK);
*checksum = 0;
struct enic_port_profile *pp;
struct vic_provinfo *vp;
const u8 oui[3] = VIC_PROVINFO_CISCO_OUI;
- const u16 os_type = htons(VIC_GENERIC_PROV_OS_TYPE_LINUX);
+ const __be16 os_type = htons(VIC_GENERIC_PROV_OS_TYPE_LINUX);
char uuid_str[38];
char client_mac_str[18];
u8 *client_mac;
printk(KERN_INFO
"%s: no PHY, assuming direct connection to switch\n",
ndev->name);
- strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE);
+ strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE);
phy_id = 0;
}
((new_mtu) < IPV6_MIN_MTU))
return -EINVAL;
- if (new_mtu > 4000) {
- jme->reg_rxcs &= ~RXCS_FIFOTHNP;
- jme->reg_rxcs |= RXCS_FIFOTHNP_64QW;
- jme_restart_rx_engine(jme);
- } else {
- jme->reg_rxcs &= ~RXCS_FIFOTHNP;
- jme->reg_rxcs |= RXCS_FIFOTHNP_128QW;
- jme_restart_rx_engine(jme);
- }
netdev->mtu = new_mtu;
netdev_update_features(netdev);
+ jme_restart_rx_engine(jme);
jme_reset_link(jme);
return 0;
RXCS_RETRYCNT_60 = 0x00000F00,
RXCS_DEFAULT = RXCS_FIFOTHTP_128T |
- RXCS_FIFOTHNP_128QW |
+ RXCS_FIFOTHNP_16QW |
RXCS_DMAREQSZ_128B |
RXCS_RETRYGAP_256ns |
RXCS_RETRYCNT_32,
int err;
int i;
- priv->eq_table.uar_map = kcalloc(sizeof *priv->eq_table.uar_map,
- mlx4_num_eq_uar(dev), GFP_KERNEL);
+ priv->eq_table.uar_map = kcalloc(mlx4_num_eq_uar(dev),
+ sizeof *priv->eq_table.uar_map,
+ GFP_KERNEL);
if (!priv->eq_table.uar_map) {
err = -ENOMEM;
goto err_out_free;
struct mlx4_priv *priv = mlx4_priv(dev);
int vec = 0, err = 0, i;
- spin_lock(&priv->msix_ctl.pool_lock);
+ mutex_lock(&priv->msix_ctl.pool_lock);
for (i = 0; !vec && i < dev->caps.comp_pool; i++) {
if (~priv->msix_ctl.pool_bm & 1ULL << i) {
priv->msix_ctl.pool_bm |= 1ULL << i;
eq_set_ci(&priv->eq_table.eq[vec], 1);
}
}
- spin_unlock(&priv->msix_ctl.pool_lock);
+ mutex_unlock(&priv->msix_ctl.pool_lock);
if (vec) {
*vector = vec;
if (likely(i >= 0)) {
/*sanity check , making sure were not trying to free irq's
Belonging to a legacy EQ*/
- spin_lock(&priv->msix_ctl.pool_lock);
+ mutex_lock(&priv->msix_ctl.pool_lock);
if (priv->msix_ctl.pool_bm & 1ULL << i) {
free_irq(priv->eq_table.eq[vec].irq,
&priv->eq_table.eq[vec]);
priv->msix_ctl.pool_bm &= ~(1ULL << i);
}
- spin_unlock(&priv->msix_ctl.pool_lock);
+ mutex_unlock(&priv->msix_ctl.pool_lock);
}
}
return err;
}
-static int mlx4_QUERY_PORT(struct mlx4_dev *dev, void *ptr, u8 port)
+int mlx4_QUERY_PORT(struct mlx4_dev *dev, void *ptr, u8 port)
{
struct mlx4_cmd_mailbox *outbox = ptr;
for (port = 0; port < dev->caps.num_ports; port++) {
/* Change the port type only if the new type is different
* from the current, and not set to Auto */
- if (port_types[port] != dev->caps.port_type[port + 1]) {
+ if (port_types[port] != dev->caps.port_type[port + 1])
change = 1;
- dev->caps.port_type[port + 1] = port_types[port];
- }
}
if (change) {
mlx4_unregister_device(dev);
for (port = 1; port <= dev->caps.num_ports; port++) {
mlx4_CLOSE_PORT(dev, port);
+ dev->caps.port_type[port] = port_types[port - 1];
err = mlx4_SET_PORT(dev, port);
if (err) {
mlx4_err(dev, "Failed to set port %d, "
resource_size_t bf_len;
int err = 0;
+ if (!dev->caps.bf_reg_size)
+ return -ENXIO;
+
bf_start = pci_resource_start(dev->pdev, 2) +
(dev->caps.num_uars << PAGE_SHIFT);
bf_len = pci_resource_len(dev->pdev, 2) -
goto err_master_mfunc;
priv->msix_ctl.pool_bm = 0;
- spin_lock_init(&priv->msix_ctl.pool_lock);
+ mutex_init(&priv->msix_ctl.pool_lock);
mlx4_enable_msi_x(dev);
if ((mlx4_is_mfunc(dev)) &&
struct mlx4_msix_ctl {
u64 pool_bm;
- spinlock_t pool_lock;
+ struct mutex pool_lock;
};
struct mlx4_steer {
MLX4_CMD_TIME_CLASS_B, MLX4_CMD_WRAPPED);
}
-static int mlx4_mr_reserve_range(struct mlx4_dev *dev, int cnt, int align,
+int mlx4_mr_reserve_range(struct mlx4_dev *dev, int cnt, int align,
u32 *base_mridx)
{
struct mlx4_priv *priv = mlx4_priv(dev);
}
EXPORT_SYMBOL_GPL(mlx4_mr_reserve_range);
-static void mlx4_mr_release_range(struct mlx4_dev *dev, u32 base_mridx, int cnt)
+void mlx4_mr_release_range(struct mlx4_dev *dev, u32 base_mridx, int cnt)
{
struct mlx4_priv *priv = mlx4_priv(dev);
mlx4_bitmap_free_range(&priv->mr_table.mpt_bitmap, base_mridx, cnt);
}
EXPORT_SYMBOL_GPL(mlx4_mr_release_range);
-static int mlx4_mr_alloc_reserved(struct mlx4_dev *dev, u32 mridx, u32 pd,
+int mlx4_mr_alloc_reserved(struct mlx4_dev *dev, u32 mridx, u32 pd,
u64 iova, u64 size, u32 access, int npages,
int page_shift, struct mlx4_mr *mr)
{
}
EXPORT_SYMBOL_GPL(mlx4_mr_alloc);
-static void mlx4_mr_free_reserved(struct mlx4_dev *dev, struct mlx4_mr *mr)
+void mlx4_mr_free_reserved(struct mlx4_dev *dev, struct mlx4_mr *mr)
{
int err;
}
EXPORT_SYMBOL_GPL(mlx4_fmr_alloc);
-static int mlx4_fmr_alloc_reserved(struct mlx4_dev *dev, u32 mridx,
+int mlx4_fmr_alloc_reserved(struct mlx4_dev *dev, u32 mridx,
u32 pd, u32 access, int max_pages,
int max_maps, u8 page_shift, struct mlx4_fmr *fmr)
{
}
EXPORT_SYMBOL_GPL(mlx4_fmr_free);
-static int mlx4_fmr_free_reserved(struct mlx4_dev *dev, struct mlx4_fmr *fmr)
+int mlx4_fmr_free_reserved(struct mlx4_dev *dev, struct mlx4_fmr *fmr)
{
if (fmr->maps)
return -EBUSY;
struct list_head list;
u8 gid[16];
enum mlx4_protocol prot;
+ enum mlx4_steer_type steer;
};
enum res_qp_states {
ret->com.res_id = id;
ret->com.state = RES_QP_RESERVED;
+ ret->local_qpn = id;
INIT_LIST_HEAD(&ret->mcg_list);
spin_lock_init(&ret->mcg_spl);
}
static int add_mcg_res(struct mlx4_dev *dev, int slave, struct res_qp *rqp,
- u8 *gid, enum mlx4_protocol prot)
+ u8 *gid, enum mlx4_protocol prot,
+ enum mlx4_steer_type steer)
{
struct res_gid *res;
int err;
} else {
memcpy(res->gid, gid, 16);
res->prot = prot;
+ res->steer = steer;
list_add_tail(&res->list, &rqp->mcg_list);
err = 0;
}
}
static int rem_mcg_res(struct mlx4_dev *dev, int slave, struct res_qp *rqp,
- u8 *gid, enum mlx4_protocol prot)
+ u8 *gid, enum mlx4_protocol prot,
+ enum mlx4_steer_type steer)
{
struct res_gid *res;
int err;
spin_lock_irq(&rqp->mcg_spl);
res = find_gid(dev, slave, rqp, gid);
- if (!res || res->prot != prot)
+ if (!res || res->prot != prot || res->steer != steer)
err = -EINVAL;
else {
list_del(&res->list);
int attach = vhcr->op_modifier;
int block_loopback = vhcr->in_modifier >> 31;
u8 steer_type_mask = 2;
- enum mlx4_steer_type type = gid[7] & steer_type_mask;
+ enum mlx4_steer_type type = (gid[7] & steer_type_mask) >> 1;
qpn = vhcr->in_modifier & 0xffffff;
err = get_res(dev, slave, qpn, RES_QP, &rqp);
qp.qpn = qpn;
if (attach) {
- err = add_mcg_res(dev, slave, rqp, gid, prot);
+ err = add_mcg_res(dev, slave, rqp, gid, prot, type);
if (err)
goto ex_put;
if (err)
goto ex_rem;
} else {
- err = rem_mcg_res(dev, slave, rqp, gid, prot);
+ err = rem_mcg_res(dev, slave, rqp, gid, prot, type);
if (err)
goto ex_put;
err = mlx4_qp_detach_common(dev, &qp, gid, prot, type);
ex_rem:
/* ignore error return below, already in error */
- err1 = rem_mcg_res(dev, slave, rqp, gid, prot);
+ err1 = rem_mcg_res(dev, slave, rqp, gid, prot, type);
ex_put:
put_res(dev, slave, qpn, RES_QP);
list_for_each_entry_safe(rgid, tmp, &rqp->mcg_list, list) {
qp.qpn = rqp->local_qpn;
err = mlx4_qp_detach_common(dev, &qp, rgid->gid, rgid->prot,
- MLX4_MC_STEER);
+ rgid->steer);
list_del(&rgid->list);
kfree(rgid);
}
ks8851_dbg_dumpkkt(ks, rxpkt);
skb->protocol = eth_type_trans(skb, ks->netdev);
- netif_rx(skb);
+ netif_rx_ni(skb);
ks->netdev->stats.rx_packets++;
ks->netdev->stats.rx_bytes += rxlen;
* @msg_enable : The message flags controlling driver output (see ethtool).
* @frame_cnt : number of frames received.
* @bus_width : i/o bus width.
- * @irq : irq number assigned to this device.
* @rc_rxqcr : Cached copy of KS_RXQCR.
* @rc_txcr : Cached copy of KS_TXCR.
* @rc_ier : Cached copy of KS_IER.
u32 msg_enable;
u32 frame_cnt;
int bus_width;
- int irq;
u16 rc_rxqcr;
u16 rc_txcr;
netif_dbg(ks, ifup, ks->netdev, "%s - entry\n", __func__);
/* reset the HW */
- err = request_irq(ks->irq, ks_irq, KS_INT_FLAGS, DRV_NAME, netdev);
+ err = request_irq(netdev->irq, ks_irq, KS_INT_FLAGS, DRV_NAME, netdev);
if (err) {
- pr_err("Failed to request IRQ: %d: %d\n", ks->irq, err);
+ pr_err("Failed to request IRQ: %d: %d\n", netdev->irq, err);
return err;
}
/* set powermode to soft power down to save power */
ks_set_powermode(ks, PMECR_PM_SOFTDOWN);
- free_irq(ks->irq, netdev);
+ free_irq(netdev->irq, netdev);
mutex_unlock(&ks->lock);
return 0;
}
if (!ks->hw_addr_cmd)
goto err_ioremap1;
- ks->irq = platform_get_irq(pdev, 0);
+ netdev->irq = platform_get_irq(pdev, 0);
- if (ks->irq < 0) {
- err = ks->irq;
+ if ((int)netdev->irq < 0) {
+ err = netdev->irq;
goto err_get_irq;
}
static int octeon_mgmt_init_phy(struct net_device *netdev)
{
struct octeon_mgmt *p = netdev_priv(netdev);
- char phy_id[20];
+ char phy_id[MII_BUS_ID_SIZE + 3];
if (octeon_is_simulation()) {
/* No PHYs in the simulator. */
return 0;
}
- snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, "0", p->port);
+ snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, "mdio-octeon-0", p->port);
p->phydev = phy_connect(netdev, phy_id, octeon_mgmt_adjust_link, 0,
PHY_INTERFACE_MODE_MII);
if (unlikely(!skb))
return -ENOMEM;
- /* Adjust the SKB for padding and checksum */
+ /* Adjust the SKB for padding */
skb_reserve(skb, NET_IP_ALIGN);
rx_buf->len = skb_len - NET_IP_ALIGN;
rx_buf->is_page = false;
- skb->ip_summed = CHECKSUM_UNNECESSARY;
rx_buf->dma_addr = pci_map_single(efx->pci_dev,
skb->data, rx_buf->len,
EFX_BUG_ON_PARANOID(!checksummed);
rx_buf->u.skb = NULL;
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
gro_result = napi_gro_receive(napi, skb);
}
unsigned long ipc_csum_error;
unsigned long rx_collision;
unsigned long rx_crc;
+ unsigned long dribbling_bit;
unsigned long rx_length;
unsigned long rx_mii;
unsigned long rx_multicast;
if (unlikely(p->des01.erx.dribbling)) {
CHIP_DBG(KERN_ERR "GMAC RX: dribbling error\n");
- ret = discard_frame;
+ x->dribbling_bit++;
}
if (unlikely(p->des01.erx.sa_filter_fail)) {
CHIP_DBG(KERN_ERR "GMAC RX : Source Address filter fail\n");
ret = discard_frame;
}
if (unlikely(p->des01.rx.dribbling))
- ret = discard_frame;
+ x->dribbling_bit++;
if (unlikely(p->des01.rx.length_error)) {
x->rx_length++;
*******************************************************************************/
#define STMMAC_RESOURCE_NAME "stmmaceth"
-#define DRV_MODULE_VERSION "Dec_2011"
+#define DRV_MODULE_VERSION "Feb_2012"
#include <linux/stmmac.h>
#include <linux/phy.h>
#include "common.h"
int stmmac_suspend(struct net_device *ndev);
int stmmac_dvr_remove(struct net_device *ndev);
struct stmmac_priv *stmmac_dvr_probe(struct device *device,
- struct plat_stmmacenet_data *plat_dat);
+ struct plat_stmmacenet_data *plat_dat,
+ void __iomem *addr);
offsetof(struct stmmac_priv, xstats.m)}
static const struct stmmac_stats stmmac_gstrings_stats[] = {
+ /* Transmit errors */
STMMAC_STAT(tx_underflow),
STMMAC_STAT(tx_carrier),
STMMAC_STAT(tx_losscarrier),
STMMAC_STAT(vlan_tag),
STMMAC_STAT(tx_deferred),
STMMAC_STAT(tx_vlan),
- STMMAC_STAT(rx_vlan),
STMMAC_STAT(tx_jabber),
STMMAC_STAT(tx_frame_flushed),
STMMAC_STAT(tx_payload_error),
STMMAC_STAT(tx_ip_header_error),
+ /* Receive errors */
STMMAC_STAT(rx_desc),
STMMAC_STAT(sa_filter_fail),
STMMAC_STAT(overflow_error),
STMMAC_STAT(ipc_csum_error),
STMMAC_STAT(rx_collision),
STMMAC_STAT(rx_crc),
+ STMMAC_STAT(dribbling_bit),
STMMAC_STAT(rx_length),
STMMAC_STAT(rx_mii),
STMMAC_STAT(rx_multicast),
STMMAC_STAT(sa_rx_filter_fail),
STMMAC_STAT(rx_missed_cntr),
STMMAC_STAT(rx_overflow_cntr),
+ STMMAC_STAT(rx_vlan),
+ /* Tx/Rx IRQ errors */
STMMAC_STAT(tx_undeflow_irq),
STMMAC_STAT(tx_process_stopped_irq),
STMMAC_STAT(tx_jabber_irq),
STMMAC_STAT(rx_watchdog_irq),
STMMAC_STAT(tx_early_irq),
STMMAC_STAT(fatal_bus_error_irq),
+ /* Extra info */
STMMAC_STAT(threshold),
STMMAC_STAT(tx_pkt_n),
STMMAC_STAT(rx_pkt_n),
case 1000:
if (likely(priv->plat->has_gmac))
ctrl &= ~priv->hw->link.port;
- stmmac_hw_fix_mac_speed(priv);
+ stmmac_hw_fix_mac_speed(priv);
break;
case 100:
case 10:
u32 uid = ((hwid & 0x0000ff00) >> 8);
u32 synid = (hwid & 0x000000ff);
- pr_info("STMMAC - user ID: 0x%x, Synopsys ID: 0x%x\n",
+ pr_info("stmmac - user ID: 0x%x, Synopsys ID: 0x%x\n",
uid, synid);
return synid;
return hw_cap;
}
-/**
- * stmmac_mac_device_setup
- * @dev : device pointer
- * Description: this is to attach the GMAC or MAC 10/100
- * main core structures that will be completed during the
- * open step.
- */
-static int stmmac_mac_device_setup(struct net_device *dev)
-{
- struct stmmac_priv *priv = netdev_priv(dev);
-
- struct mac_device_info *device;
-
- if (priv->plat->has_gmac)
- device = dwmac1000_setup(priv->ioaddr);
- else
- device = dwmac100_setup(priv->ioaddr);
-
- if (!device)
- return -ENOMEM;
-
- priv->hw = device;
- priv->hw->ring = &ring_mode_ops;
-
- if (device_can_wakeup(priv->device)) {
- priv->wolopts = WAKE_MAGIC; /* Magic Frame as default */
- enable_irq_wake(priv->wol_irq);
- }
-
- return 0;
-}
-
static void stmmac_check_ether_addr(struct stmmac_priv *priv)
{
/* verify if the MAC address is valid, in case of failures it
struct stmmac_priv *priv = netdev_priv(dev);
int ret;
- /* MAC HW device setup */
- ret = stmmac_mac_device_setup(dev);
- if (ret < 0)
- return ret;
-
stmmac_check_ether_addr(priv);
- stmmac_verify_args();
-
- /* Override with kernel parameters if supplied XXX CRS XXX
- * this needs to have multiple instances */
- if ((phyaddr >= 0) && (phyaddr <= 31))
- priv->plat->phy_addr = phyaddr;
-
/* MDIO bus Registration */
ret = stmmac_mdio_register(dev);
if (ret < 0) {
goto open_error;
}
- stmmac_get_synopsys_id(priv);
-
- priv->hw_cap_support = stmmac_get_hw_features(priv);
-
- if (priv->hw_cap_support) {
- pr_info(" Support DMA HW capability register");
-
- /* We can override some gmac/dma configuration fields: e.g.
- * enh_desc, tx_coe (e.g. that are passed through the
- * platform) with the values from the HW capability
- * register (if supported).
- */
- priv->plat->enh_desc = priv->dma_cap.enh_desc;
- priv->plat->tx_coe = priv->dma_cap.tx_coe;
- priv->plat->pmt = priv->dma_cap.pmt_remote_wake_up;
-
- /* By default disable wol on magic frame if not supported */
- if (!priv->dma_cap.pmt_magic_frame)
- priv->wolopts &= ~WAKE_MAGIC;
-
- } else
- pr_info(" No HW DMA feature register supported");
-
- /* Select the enhnaced/normal descriptor structures */
- stmmac_selec_desc_mode(priv);
-
- /* PMT module is not integrated in all the MAC devices. */
- if (priv->plat->pmt) {
- pr_info(" Remote wake-up capable\n");
- device_set_wakeup_capable(priv->device, 1);
- }
-
- priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr);
- if (priv->rx_coe)
- pr_info(" Checksum Offload Engine supported\n");
- if (priv->plat->tx_coe)
- pr_info(" Checksum insertion supported\n");
-
/* Create and initialize the TX/RX descriptors chains. */
priv->dma_tx_size = STMMAC_ALIGN(dma_txsize);
priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize);
/* Copy the MAC addr into the HW */
priv->hw->mac->set_umac_addr(priv->ioaddr, dev->dev_addr, 0);
+
/* If required, perform hw setup of the bus. */
if (priv->plat->bus_setup)
priv->plat->bus_setup(priv->ioaddr);
+
/* Initialize the MAC Core */
priv->hw->mac->core_init(priv->ioaddr);
- netdev_update_features(dev);
-
/* Request the IRQ lines */
ret = request_irq(dev->irq, stmmac_interrupt,
IRQF_SHARED, dev->name, dev);
goto open_error;
}
+ /* Request the Wake IRQ in case of another line is used for WoL */
+ if (priv->wol_irq != dev->irq) {
+ ret = request_irq(priv->wol_irq, stmmac_interrupt,
+ IRQF_SHARED, dev->name, dev);
+ if (unlikely(ret < 0)) {
+ pr_err("%s: ERROR: allocating the ext WoL IRQ %d "
+ "(error: %d)\n", __func__, priv->wol_irq, ret);
+ goto open_error_wolirq;
+ }
+ }
+
/* Enable the MAC Rx/Tx */
stmmac_set_mac(priv->ioaddr, true);
#ifdef CONFIG_STMMAC_DEBUG_FS
ret = stmmac_init_fs(dev);
if (ret < 0)
- pr_warning("\tFailed debugFS registration");
+ pr_warning("%s: failed debugFS registration\n", __func__);
#endif
/* Start the ball rolling... */
DBG(probe, DEBUG, "%s: DMA RX/TX processes started...\n", dev->name);
#ifdef CONFIG_STMMAC_TIMER
priv->tm->timer_start(tmrate);
#endif
+
/* Dump DMA/MAC registers */
if (netif_msg_hw(priv)) {
priv->hw->mac->dump_regs(priv->ioaddr);
return 0;
+open_error_wolirq:
+ free_irq(dev->irq, dev);
+
open_error:
#ifdef CONFIG_STMMAC_TIMER
kfree(priv->tm);
/* Free the IRQ lines */
free_irq(dev->irq, dev);
+ if (priv->wol_irq != dev->irq)
+ free_irq(priv->wol_irq, dev);
/* Stop TX/RX DMA and clear the descriptors */
priv->hw->dma->stop_tx(priv->ioaddr);
.ndo_set_mac_address = eth_mac_addr,
};
+/**
+ * stmmac_hw_init - Init the MAC device
+ * @priv : pointer to the private device structure.
+ * Description: this function detects which MAC device
+ * (GMAC/MAC10-100) has to attached, checks the HW capability
+ * (if supported) and sets the driver's features (for example
+ * to use the ring or chaine mode or support the normal/enh
+ * descriptor structure).
+ */
+static int stmmac_hw_init(struct stmmac_priv *priv)
+{
+ int ret = 0;
+ struct mac_device_info *mac;
+
+ /* Identify the MAC HW device */
+ if (priv->plat->has_gmac)
+ mac = dwmac1000_setup(priv->ioaddr);
+ else
+ mac = dwmac100_setup(priv->ioaddr);
+ if (!mac)
+ return -ENOMEM;
+
+ priv->hw = mac;
+
+ /* To use the chained or ring mode */
+ priv->hw->ring = &ring_mode_ops;
+
+ /* Get and dump the chip ID */
+ stmmac_get_synopsys_id(priv);
+
+ /* Get the HW capability (new GMAC newer than 3.50a) */
+ priv->hw_cap_support = stmmac_get_hw_features(priv);
+ if (priv->hw_cap_support) {
+ pr_info(" DMA HW capability register supported");
+
+ /* We can override some gmac/dma configuration fields: e.g.
+ * enh_desc, tx_coe (e.g. that are passed through the
+ * platform) with the values from the HW capability
+ * register (if supported).
+ */
+ priv->plat->enh_desc = priv->dma_cap.enh_desc;
+ priv->plat->tx_coe = priv->dma_cap.tx_coe;
+ priv->plat->pmt = priv->dma_cap.pmt_remote_wake_up;
+ } else
+ pr_info(" No HW DMA feature register supported");
+
+ /* Select the enhnaced/normal descriptor structures */
+ stmmac_selec_desc_mode(priv);
+
+ priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr);
+ if (priv->rx_coe)
+ pr_info(" RX Checksum Offload Engine supported\n");
+ if (priv->plat->tx_coe)
+ pr_info(" TX Checksum insertion supported\n");
+
+ if (priv->plat->pmt) {
+ pr_info(" Wake-Up On Lan supported\n");
+ device_set_wakeup_capable(priv->device, 1);
+ }
+
+ return ret;
+}
+
/**
* stmmac_dvr_probe
* @device: device pointer
* call the alloc_etherdev, allocate the priv structure.
*/
struct stmmac_priv *stmmac_dvr_probe(struct device *device,
- struct plat_stmmacenet_data *plat_dat)
+ struct plat_stmmacenet_data *plat_dat,
+ void __iomem *addr)
{
int ret = 0;
struct net_device *ndev = NULL;
ether_setup(ndev);
- ndev->netdev_ops = &stmmac_netdev_ops;
stmmac_set_ethtool_ops(ndev);
+ priv->pause = pause;
+ priv->plat = plat_dat;
+ priv->ioaddr = addr;
+ priv->dev->base_addr = (unsigned long)addr;
+
+ /* Verify driver arguments */
+ stmmac_verify_args();
+
+ /* Override with kernel parameters if supplied XXX CRS XXX
+ * this needs to have multiple instances */
+ if ((phyaddr >= 0) && (phyaddr <= 31))
+ priv->plat->phy_addr = phyaddr;
+
+ /* Init MAC and get the capabilities */
+ stmmac_hw_init(priv);
+
+ ndev->netdev_ops = &stmmac_netdev_ops;
- ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+ ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+ NETIF_F_RXCSUM;
ndev->features |= ndev->hw_features | NETIF_F_HIGHDMA;
ndev->watchdog_timeo = msecs_to_jiffies(watchdog);
#ifdef STMMAC_VLAN_TAG_USED
if (flow_ctrl)
priv->flow_ctrl = FLOW_AUTO; /* RX/TX pause on */
- priv->pause = pause;
- priv->plat = plat_dat;
netif_napi_add(ndev, &priv->napi, stmmac_poll, 64);
spin_lock_init(&priv->lock);
ret = register_netdev(ndev);
if (ret) {
- pr_err("%s: ERROR %i registering the device\n",
- __func__, ret);
+ pr_err("%s: ERROR %i registering the device\n", __func__, ret);
goto error;
}
- DBG(probe, DEBUG, "%s: Scatter/Gather: %s - HW checksums: %s\n",
- ndev->name, (ndev->features & NETIF_F_SG) ? "on" : "off",
- (ndev->features & NETIF_F_IP_CSUM) ? "on" : "off");
-
return priv;
error:
stmmac_default_data();
- priv = stmmac_dvr_probe(&(pdev->dev), &plat_dat);
+ priv = stmmac_dvr_probe(&(pdev->dev), &plat_dat, addr);
if (!priv) {
- pr_err("%s: main drivr probe failed", __func__);
+ pr_err("%s: main driver probe failed", __func__);
goto err_out;
}
- priv->ioaddr = addr;
- priv->dev->base_addr = (unsigned long)addr;
priv->dev->irq = pdev->irq;
priv->wol_irq = pdev->irq;
goto out_release_region;
}
plat_dat = pdev->dev.platform_data;
- priv = stmmac_dvr_probe(&(pdev->dev), plat_dat);
+
+ /* Custom initialisation (if needed)*/
+ if (plat_dat->init) {
+ ret = plat_dat->init(pdev);
+ if (unlikely(ret))
+ goto out_unmap;
+ }
+
+ priv = stmmac_dvr_probe(&(pdev->dev), plat_dat, addr);
if (!priv) {
- pr_err("%s: main drivr probe failed", __func__);
+ pr_err("%s: main driver probe failed", __func__);
goto out_unmap;
}
- priv->ioaddr = addr;
- /* Set the I/O base addr */
- priv->dev->base_addr = (unsigned long)addr;
-
/* Get the MAC information */
priv->dev->irq = platform_get_irq_byname(pdev, "macirq");
if (priv->dev->irq == -ENXIO) {
platform_set_drvdata(pdev, priv->dev);
- /* Custom initialisation */
- if (priv->plat->init) {
- ret = priv->plat->init(pdev);
- if (unlikely(ret))
- goto out_unmap;
- }
-
pr_debug("STMMAC platform driver registration completed");
return 0;
pdata = pdev->dev.platform_data;
if (external_switch || dumb_switch) {
- strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
+ strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE); /* fixed phys bus */
phy_id = pdev->id;
} else {
for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
if (phy_id == PHY_MAX_ADDR) {
dev_err(&pdev->dev, "no PHY present, falling back "
"to switch on MDIO bus 0\n");
- strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
+ strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE); /* fixed phys bus */
phy_id = pdev->id;
}
int ret;
/* free and bail if we are shutting down */
- if (unlikely(!netif_running(ndev) || !netif_carrier_ok(ndev))) {
+ if (unlikely(!netif_running(ndev))) {
dev_kfree_skb_any(skb);
return;
}
recycle:
ret = cpdma_chan_submit(priv->rxchan, skb, skb->data,
skb_tailroom(skb), GFP_KERNEL);
- if (WARN_ON(ret < 0))
+
+ WARN_ON(ret == -ENOMEM);
+ if (unlikely(ret < 0))
dev_kfree_skb_any(skb);
}
__raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
udelay(50);
- snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, "0", plat->phy);
+ snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
+ mdio_bus->id, plat->phy);
port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0,
PHY_INTERFACE_MODE_MII);
if (IS_ERR(port->phydev)) {
#include <asm/irq.h>
#include <asm/uaccess.h>
-MODULE_DESCRIPTION("ICPlus IP175C/IP101A/IC1001 PHY drivers");
+MODULE_DESCRIPTION("ICPlus IP175C/IP101A/IP101G/IC1001 PHY drivers");
MODULE_AUTHOR("Michael Barkowski");
MODULE_LICENSE("GPL");
-/* IP101A/IP1001 */
-#define IP10XX_SPEC_CTRL_STATUS 16 /* Spec. Control Register */
-#define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */
-#define IP1001_PHASE_SEL_MASK 3 /* IP1001 RX/TXPHASE_SEL */
-#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */
-#define IP101A_APS_ON 2 /* IP101A APS Mode bit */
+/* IP101A/G - IP1001 */
+#define IP10XX_SPEC_CTRL_STATUS 16 /* Spec. Control Register */
+#define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */
+#define IP1001_PHASE_SEL_MASK 3 /* IP1001 RX/TXPHASE_SEL */
+#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */
+#define IP101A_G_APS_ON 2 /* IP101A/G APS Mode bit */
static int ip175c_config_init(struct phy_device *phydev)
{
static int ip1xx_reset(struct phy_device *phydev)
{
- int err, bmcr;
+ int bmcr;
/* Software Reset PHY */
bmcr = phy_read(phydev, MII_BMCR);
+ if (bmcr < 0)
+ return bmcr;
bmcr |= BMCR_RESET;
- err = phy_write(phydev, MII_BMCR, bmcr);
- if (err < 0)
- return err;
+ bmcr = phy_write(phydev, MII_BMCR, bmcr);
+ if (bmcr < 0)
+ return bmcr;
do {
bmcr = phy_read(phydev, MII_BMCR);
+ if (bmcr < 0)
+ return bmcr;
} while (bmcr & BMCR_RESET);
- return err;
+ return 0;
}
static int ip1001_config_init(struct phy_device *phydev)
/* Enable Auto Power Saving mode */
c = phy_read(phydev, IP1001_SPEC_CTRL_STATUS_2);
+ if (c < 0)
+ return c;
c |= IP1001_APS_ON;
+ c = phy_write(phydev, IP1001_SPEC_CTRL_STATUS_2, c);
if (c < 0)
return c;
/* Additional delay (2ns) used to adjust RX clock phase
* at RGMII interface */
c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
+ if (c < 0)
+ return c;
+
c |= IP1001_PHASE_SEL_MASK;
c = phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c);
+ if (c < 0)
+ return c;
}
- return c;
+ return 0;
}
-static int ip101a_config_init(struct phy_device *phydev)
+static int ip101a_g_config_init(struct phy_device *phydev)
{
int c;
/* Enable Auto Power Saving mode */
c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
- c |= IP101A_APS_ON;
+ c |= IP101A_G_APS_ON;
return c;
}
.phy_id_mask = 0x0ffffff0,
.features = PHY_GBIT_FEATURES | SUPPORTED_Pause |
SUPPORTED_Asym_Pause,
+ .flags = PHY_HAS_INTERRUPT,
.config_init = &ip1001_config_init,
.config_aneg = &genphy_config_aneg,
.read_status = &genphy_read_status,
.driver = { .owner = THIS_MODULE,},
};
-static struct phy_driver ip101a_driver = {
+static struct phy_driver ip101a_g_driver = {
.phy_id = 0x02430c54,
- .name = "ICPlus IP101A",
+ .name = "ICPlus IP101A/G",
.phy_id_mask = 0x0ffffff0,
.features = PHY_BASIC_FEATURES | SUPPORTED_Pause |
SUPPORTED_Asym_Pause,
- .config_init = &ip101a_config_init,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &ip101a_g_config_init,
.config_aneg = &genphy_config_aneg,
.read_status = &genphy_read_status,
.suspend = genphy_suspend,
if (ret < 0)
return -ENODEV;
- ret = phy_driver_register(&ip101a_driver);
+ ret = phy_driver_register(&ip101a_g_driver);
if (ret < 0)
return -ENODEV;
static void __exit icplus_exit(void)
{
phy_driver_unregister(&ip1001_driver);
- phy_driver_unregister(&ip101a_driver);
+ phy_driver_unregister(&ip101a_g_driver);
phy_driver_unregister(&ip175c_driver);
}
static struct mdio_device_id __maybe_unused icplus_tbl[] = {
{ 0x02430d80, 0x0ffffff0 },
{ 0x02430d90, 0x0ffffff0 },
+ { 0x02430c54, 0x0ffffff0 },
{ }
};
continue;
}
if (PPP_MP_CB(p)->sequence != seq) {
+ u32 oldseq;
/* Fragment `seq' is missing. If it is after
minseq, it might arrive later, so stop here. */
if (seq_after(seq, minseq))
break;
/* Fragment `seq' is lost, keep going. */
lost = 1;
+ oldseq = seq;
seq = seq_before(minseq, PPP_MP_CB(p)->sequence)?
minseq + 1: PPP_MP_CB(p)->sequence;
+
+ if (ppp->debug & 1)
+ netdev_printk(KERN_DEBUG, ppp->dev,
+ "lost frag %u..%u\n",
+ oldseq, seq-1);
+
goto again;
}
struct sk_buff *tmp2;
skb_queue_reverse_walk_from_safe(list, p, tmp2) {
+ if (ppp->debug & 1)
+ netdev_printk(KERN_DEBUG, ppp->dev,
+ "discarding frag %u\n",
+ PPP_MP_CB(p)->sequence);
__skb_unlink(p, list);
kfree_skb(p);
}
/* If we have discarded any fragments,
signal a receive error. */
if (PPP_MP_CB(head)->sequence != ppp->nextseq) {
+ skb_queue_walk_safe(list, p, tmp) {
+ if (p == head)
+ break;
+ if (ppp->debug & 1)
+ netdev_printk(KERN_DEBUG, ppp->dev,
+ "discarding frag %u\n",
+ PPP_MP_CB(p)->sequence);
+ __skb_unlink(p, list);
+ kfree_skb(p);
+ }
+
if (ppp->debug & 1)
netdev_printk(KERN_DEBUG, ppp->dev,
" missed pkts %u..%u\n",
.driver_info = 0,
},
+/* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = 0,
+},
+
/*
* WHITELIST!!!
*
struct hso_serial *serial = get_serial_by_tty(tty);
struct hso_tiocmget *tiocmget = serial->tiocmget;
- memset(&icount, 0, sizeof(struct serial_icounter_struct));
+ memset(icount, 0, sizeof(struct serial_icounter_struct));
if (!tiocmget)
return -ENOENT;
#define USB_PRODUCT_IPHONE_3GS 0x1294
#define USB_PRODUCT_IPHONE_4 0x1297
#define USB_PRODUCT_IPHONE_4_VZW 0x129c
+#define USB_PRODUCT_IPHONE_4S 0x12a0
#define IPHETH_USBINTF_CLASS 255
#define IPHETH_USBINTF_SUBCLASS 253
USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4_VZW,
IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
IPHETH_USBINTF_PROTO) },
+ { USB_DEVICE_AND_INTERFACE_INFO(
+ USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4S,
+ IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+ IPHETH_USBINTF_PROTO) },
{ }
};
MODULE_DEVICE_TABLE(usb, ipheth_table);
.idProduct = 0x9031, /* C-750 C-760 */
ZAURUS_MASTER_INTERFACE,
.driver_info = ZAURUS_PXA_INFO,
+}, {
+ /* C-750/C-760/C-860/SL-C3000 PDA in MDLM mode */
+ USB_DEVICE_AND_INTERFACE_INFO(0x04DD, 0x9031, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &bogus_mdlm_info,
}, {
.match_flags = USB_DEVICE_ID_MATCH_INT_INFO
| USB_DEVICE_ID_MATCH_DEVICE,
ZAURUS_MASTER_INTERFACE,
.driver_info = OLYMPUS_MXL_INFO,
},
+
+/* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &bogus_mdlm_info,
+},
{ }, // END
};
MODULE_DEVICE_TABLE(usb, products);
unregister_netdevice_queue(peer, head);
}
-static const struct nla_policy veth_policy[VETH_INFO_MAX + 1];
+static const struct nla_policy veth_policy[VETH_INFO_MAX + 1] = {
+ [VETH_INFO_PEER] = { .len = sizeof(struct ifinfomsg) },
+};
static struct rtnl_link_ops veth_link_ops = {
.kind = DRV_NAME,
/* for simplicity, don't copy L4 headers */
ctx->l4_hdr_size = 0;
}
- ctx->copy_size = ctx->eth_ip_hdr_size +
- ctx->l4_hdr_size;
+ ctx->copy_size = min(ctx->eth_ip_hdr_size +
+ ctx->l4_hdr_size, skb->len);
} else {
ctx->eth_ip_hdr_size = 0;
ctx->l4_hdr_size = 0;
fc = hdr->frame_control;
for (i = 0; i < sc->hw->max_rates; i++) {
struct ieee80211_tx_rate *rate = &tx_info->status.rates[i];
- if (!rate->count)
+ if (rate->idx < 0 || !rate->count)
break;
final_ts_idx = i;
ret = mwifiex_set_rf_channel(priv, channel,
priv->adapter->channel_type);
- ret = mwifiex_set_encode(priv, NULL, 0, 0, 1); /* Disable keys */
+ /* As this is new association, clear locally stored
+ * keys and security related flags */
+ priv->sec_info.wpa_enabled = false;
+ priv->sec_info.wpa2_enabled = false;
+ priv->wep_key_curr_index = 0;
+ ret = mwifiex_set_encode(priv, NULL, 0, 0, 1);
if (mode == NL80211_IFTYPE_ADHOC) {
/* "privacy" is set only for ad-hoc mode */
dev_dbg(priv->adapter->dev,
"info: setting wep encryption"
" with key len %d\n", sme->key_len);
+ priv->wep_key_curr_index = sme->key_idx;
ret = mwifiex_set_encode(priv, sme->key, sme->key_len,
sme->key_idx, 0);
}
return err;
}
- return 1;
+ return 0;
}
static int rtl_pci_start(struct ieee80211_hw *hw)
}
/* Init PCI sw */
- err = !rtl_pci_init(hw, pdev);
+ err = rtl_pci_init(hw, pdev);
if (err) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
("Failed to init PCI.\n"));
+#include <linux/prefetch.h>
+
/**
* iommu_fill_pdir - Insert coalesced scatter/gather chunks into the I/O Pdir.
* @ioc: The I/O Controller.
return rc;
}
- pci_write_config_dword(dev, iov->pos + PCI_SRIOV_SYS_PGSIZE, iov->pgsz);
-
iov->ctrl |= PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE;
pci_cfg_access_lock(dev);
pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
return -EIO;
pgsz &= ~(pgsz - 1);
+ pci_write_config_dword(dev, pos + PCI_SRIOV_SYS_PGSIZE, pgsz);
nres = 0;
for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
dev_dbg(&dev->dev, "scanning [bus %02x-%02x] behind bridge, pass %d\n",
secondary, subordinate, pass);
+ if (!primary && (primary != bus->number) && secondary && subordinate) {
+ dev_warn(&dev->dev, "Primary bus is hard wired to 0\n");
+ primary = bus->number;
+ }
+
/* Check if setup is sensible at all */
if (!pass &&
(primary != bus->number || secondary <= bus->number)) {
}
EXPORT_SYMBOL(pci_remove_bus);
+static void __pci_remove_behind_bridge(struct pci_dev *dev);
/**
* pci_remove_bus_device - remove a PCI device and any children
* @dev: the device to remove
if (dev->subordinate) {
struct pci_bus *b = dev->subordinate;
- pci_remove_behind_bridge(dev);
+ __pci_remove_behind_bridge(dev);
pci_remove_bus(b);
dev->subordinate = NULL;
}
__pci_remove_bus_device(dev);
}
+static void __pci_remove_behind_bridge(struct pci_dev *dev)
+{
+ struct list_head *l, *n;
+
+ if (dev->subordinate)
+ list_for_each_safe(l, n, &dev->subordinate->devices)
+ __pci_remove_bus_device(pci_dev_b(l));
+}
+
+static void pci_stop_behind_bridge(struct pci_dev *dev)
+{
+ struct list_head *l, *n;
+
+ if (dev->subordinate)
+ list_for_each_safe(l, n, &dev->subordinate->devices)
+ pci_stop_bus_device(pci_dev_b(l));
+}
+
/**
* pci_remove_behind_bridge - remove all devices behind a PCI bridge
* @dev: PCI bridge device
*/
void pci_remove_behind_bridge(struct pci_dev *dev)
{
- struct list_head *l, *n;
-
- if (dev->subordinate)
- list_for_each_safe(l, n, &dev->subordinate->devices)
- __pci_remove_bus_device(pci_dev_b(l));
+ pci_stop_behind_bridge(dev);
+ __pci_remove_behind_bridge(dev);
}
static void pci_stop_bus_devices(struct pci_bus *bus)
if (verbose_request)
dev_info(&pdev->xdev->dev,
- "read dev=%04x:%02x:%02x.%01x - offset %x size %d\n",
+ "read dev=%04x:%02x:%02x.%d - offset %x size %d\n",
pci_domain_nr(bus), bus->number, PCI_SLOT(devfn),
PCI_FUNC(devfn), where, size);
if (verbose_request)
dev_info(&pdev->xdev->dev,
- "write dev=%04x:%02x:%02x.%01x - "
+ "write dev=%04x:%02x:%02x.%d - "
"offset %x size %d val %x\n",
pci_domain_nr(bus), bus->number,
PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, val);
d = pci_scan_single_device(b, devfn);
if (d)
dev_info(&pdev->xdev->dev, "New device on "
- "%04x:%02x:%02x.%02x found.\n", domain, bus,
+ "%04x:%02x:%02x.%d found.\n", domain, bus,
PCI_SLOT(devfn), PCI_FUNC(devfn));
}
pci_dev = pci_get_slot(pci_bus, PCI_DEVFN(slot, func));
if (!pci_dev) {
dev_dbg(&pdev->xdev->dev,
- "Cannot get PCI device %04x:%02x:%02x.%02x\n",
+ "Cannot get PCI device %04x:%02x:%02x.%d\n",
domain, bus, slot, func);
continue;
}
pci_dev_put(pci_dev);
dev_dbg(&pdev->xdev->dev,
- "PCI device %04x:%02x:%02x.%02x removed.\n",
+ "PCI device %04x:%02x:%02x.%d removed.\n",
domain, bus, slot, func);
}
goto err1;
}
- if (ret) {
- while (--i >= 0)
- soc_pcmcia_remove_one(&sinfo->skt[i]);
- kfree(sinfo);
- clk_put(clk);
- } else {
- pxa2xx_configure_sockets(&dev->dev);
- dev_set_drvdata(&dev->dev, sinfo);
- }
+ pxa2xx_configure_sockets(&dev->dev);
+ dev_set_drvdata(&dev->dev, sinfo);
return 0;
err1:
while (--i >= 0)
soc_pcmcia_remove_one(&sinfo->skt[i]);
+ clk_put(clk);
kfree(sinfo);
err0:
return ret;
pindesc->pctldev = pctldev;
/* Copy basic pin info */
- if (pindesc->name) {
+ if (name) {
pindesc->name = name;
} else {
pindesc->name = kasprintf(GFP_KERNEL, "PIN%u", number);
#include <linux/mutex.h>
#include <asm/bios_ebda.h>
+#include <asm-generic/io-64-nonatomic-lo-hi.h>
+
static bool force;
module_param(force, bool, 0);
MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
static u8 rtl_cmd_type;
static u8 rtl_cmd_width;
-#ifndef readq
-static inline __u64 readq(const volatile void __iomem *addr)
-{
- const volatile u32 __iomem *p = addr;
- u32 low, high;
-
- low = readl(p);
- high = readl(p + 1);
-
- return low + ((u64)high << 32);
-}
-#endif
-
static void __iomem *rtl_port_map(phys_addr_t addr, unsigned long len)
{
if (rtl_cmd_type == RTL_ADDR_TYPE_MMIO)
#include <asm/processor.h>
#include "intel_ips.h"
+#include <asm-generic/io-64-nonatomic-lo-hi.h>
+
#define PCI_DEVICE_ID_INTEL_THERMAL_SENSOR 0x3b32
/*
static bool
ips_gpu_turbo_enabled(struct ips_driver *ips);
-#ifndef readq
-static inline __u64 readq(const volatile void __iomem *addr)
-{
- const volatile u32 __iomem *p = addr;
- u32 low, high;
-
- low = readl(p);
- high = readl(p + 1);
-
- return low + ((u64)high << 32);
-}
-#endif
-
/**
* ips_cpu_busy - is CPU busy?
* @ips: IPS driver struct
};
static const unsigned int LDO13_table[] = {
- 1300000, 1800000, 2000000, 2500000, 2800000, 3000000, 0, 0,
+ 1200000, 1300000, 1800000, 2000000, 2500000, 2800000, 3000000, 0,
};
static const unsigned int LDO13_suspend_table[] = {
PM8607_LDO( 7, LDO7, 0, 3, SUPPLIES_EN12, 1),
PM8607_LDO( 8, LDO8, 0, 3, SUPPLIES_EN12, 2),
PM8607_LDO( 9, LDO9, 0, 3, SUPPLIES_EN12, 3),
- PM8607_LDO(10, LDO10, 0, 3, SUPPLIES_EN12, 4),
+ PM8607_LDO(10, LDO10, 0, 4, SUPPLIES_EN12, 4),
PM8607_LDO(12, LDO12, 0, 4, SUPPLIES_EN12, 5),
PM8607_LDO(13, VIBRATOR_SET, 1, 3, VIBRATOR_SET, 0),
- PM8607_LDO(14, LDO14, 0, 4, SUPPLIES_EN12, 6),
+ PM8607_LDO(14, LDO14, 0, 3, SUPPLIES_EN12, 6),
};
static int __devinit pm8607_regulator_probe(struct platform_device *pdev)
if (ret != 0)
return ret;
val &= MAX8649_VOL_MASK;
- voltage = max8649_list_voltage(rdev, (unsigned char)ret); /* uV */
+ voltage = max8649_list_voltage(rdev, (unsigned char)val); /* uV */
/* get rate */
ret = regmap_read(info->regmap, MAX8649_RAMP, &val);
return num;
}
+EXPORT_SYMBOL_GPL(mc13xxx_get_num_regulators_dt);
struct mc13xxx_regulator_init_data * __devinit mc13xxx_parse_regulators_dt(
struct platform_device *pdev, struct mc13xxx_regulator *regulators,
return data;
}
+EXPORT_SYMBOL_GPL(mc13xxx_parse_regulators_dt);
#endif
MODULE_LICENSE("GPL v2");
#include <linux/hdreg.h> /* HDIO_GETGEO */
#include <linux/bio.h>
#include <linux/module.h>
+#include <linux/compat.h>
#include <linux/init.h>
#include <asm/debug.h>
#include <asm/idals.h>
#include <asm/ebcdic.h>
-#include <asm/compat.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/cio.h>
#define KMSG_COMPONENT "dasd"
#include <linux/interrupt.h>
+#include <linux/compat.h>
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/blkpg.h>
struct tty_struct *tty; /* pointer to tty structure if present */
struct raw3215_req *queued_read; /* pointer to queued read requests */
struct raw3215_req *queued_write;/* pointer to queued write requests */
+ struct tasklet_struct tlet; /* tasklet to invoke tty_wakeup */
wait_queue_head_t empty_wait; /* wait queue for flushing */
struct timer_list timer; /* timer for delayed output */
int line_pos; /* position on the line (for tabs) */
}
}
+/*
+ * Call tty_wakeup from tasklet context
+ */
+static void raw3215_wakeup(unsigned long data)
+{
+ struct raw3215_info *raw = (struct raw3215_info *) data;
+ tty_wakeup(raw->tty);
+}
+
/*
* Try to start the next IO and wake up processes waiting on the tty.
*/
static void raw3215_next_io(struct raw3215_info *raw)
{
- struct tty_struct *tty;
-
raw3215_mk_write_req(raw);
raw3215_try_io(raw);
- tty = raw->tty;
- if (tty != NULL &&
- RAW3215_BUFFER_SIZE - raw->count >= RAW3215_MIN_SPACE) {
- tty_wakeup(tty);
- }
+ if (raw->tty && RAW3215_BUFFER_SIZE - raw->count >= RAW3215_MIN_SPACE)
+ tasklet_schedule(&raw->tlet);
}
/*
return -ENOMEM;
}
init_waitqueue_head(&raw->empty_wait);
+ tasklet_init(&raw->tlet, raw3215_wakeup, (unsigned long) raw);
dev_set_drvdata(&cdev->dev, raw);
cdev->handler = raw3215_irq;
raw->flags |= RAW3215_FIXED;
init_waitqueue_head(&raw->empty_wait);
+ tasklet_init(&raw->tlet, raw3215_wakeup, (unsigned long) raw);
/* Request the console irq */
if (raw3215_startup(raw) != 0) {
tty->closing = 1;
/* Shutdown the terminal */
raw3215_shutdown(raw);
+ tasklet_kill(&raw->tlet);
tty->closing = 0;
raw->tty = NULL;
}
#include <linux/console.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/compat.h>
#include <linux/module.h>
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/init.h>
+#include <linux/compat.h>
#include <linux/kernel.h>
#include <linux/miscdevice.h>
#include <linux/slab.h>
*/
#include <linux/slab.h>
+#include <linux/compat.h>
#include <linux/device.h>
#include <linux/module.h>
#include <linux/uaccess.h>
#define KMSG_COMPONENT "zfcp"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+#include <linux/compat.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/miscdevice.h>
struct rdac_controller *ctlr;
ctlr = container_of(kref, struct rdac_controller, kref);
- flush_workqueue(kmpath_rdacd);
- spin_lock(&list_lock);
list_del(&ctlr->node);
- spin_unlock(&list_lock);
kfree(ctlr);
}
{
struct rdac_controller *ctlr, *tmp;
- spin_lock(&list_lock);
-
list_for_each_entry(tmp, &ctlr_list, node) {
if ((memcmp(tmp->array_id, array_id, UNIQUE_ID_LEN) == 0) &&
(tmp->index == index) &&
(tmp->host == sdev->host)) {
kref_get(&tmp->kref);
- spin_unlock(&list_lock);
return tmp;
}
}
ctlr = kmalloc(sizeof(*ctlr), GFP_ATOMIC);
if (!ctlr)
- goto done;
+ return NULL;
/* initialize fields of controller */
memcpy(ctlr->array_id, array_id, UNIQUE_ID_LEN);
INIT_WORK(&ctlr->ms_work, send_mode_select);
INIT_LIST_HEAD(&ctlr->ms_head);
list_add(&ctlr->node, &ctlr_list);
-done:
- spin_unlock(&list_lock);
+
return ctlr;
}
index = 0;
else
index = 1;
+
+ spin_lock(&list_lock);
h->ctlr = get_controller(index, array_name, array_id, sdev);
if (!h->ctlr)
err = SCSI_DH_RES_TEMP_UNAVAIL;
+ spin_unlock(&list_lock);
}
return err;
}
return 0;
clean_ctlr:
+ spin_lock(&list_lock);
kref_put(&h->ctlr->kref, release_controller);
+ spin_unlock(&list_lock);
failed:
kfree(scsi_dh_data);
struct rdac_dh_data *h;
unsigned long flags;
- spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
scsi_dh_data = sdev->scsi_dh_data;
+ h = (struct rdac_dh_data *) scsi_dh_data->buf;
+ if (h->ctlr && h->ctlr->ms_queued)
+ flush_workqueue(kmpath_rdacd);
+
+ spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
sdev->scsi_dh_data = NULL;
spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
- h = (struct rdac_dh_data *) scsi_dh_data->buf;
+ spin_lock(&list_lock);
if (h->ctlr)
kref_put(&h->ctlr->kref, release_controller);
+ spin_unlock(&list_lock);
kfree(scsi_dh_data);
module_put(THIS_MODULE);
sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", RDAC_NAME);
ENTER;
ioa_cfg = (struct ipr_ioa_cfg *) scsi_cmd->device->host->hostdata;
- dev_err(&ioa_cfg->pdev->dev,
- "Adapter being reset as a result of error recovery.\n");
+ if (!ioa_cfg->in_reset_reload) {
+ dev_err(&ioa_cfg->pdev->dev,
+ "Adapter being reset as a result of error recovery.\n");
- if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
- ioa_cfg->sdt_state = GET_DUMP;
+ if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
+ ioa_cfg->sdt_state = GET_DUMP;
+ }
rc = ipr_reset_reload(ioa_cfg, IPR_SHUTDOWN_ABBREV);
struct ipr_ioa_cfg *ioa_cfg;
struct ipr_resource_entry *res;
struct ipr_cmd_pkt *cmd_pkt;
- u32 ioasc;
+ u32 ioasc, int_reg;
int op_found = 0;
ENTER;
*/
if (ioa_cfg->in_reset_reload || ioa_cfg->ioa_is_dead)
return FAILED;
- if (!res || !ipr_is_gscsi(res))
+ if (!res)
+ return FAILED;
+
+ /*
+ * If we are aborting a timed out op, chances are that the timeout was caused
+ * by a still not detected EEH error. In such cases, reading a register will
+ * trigger the EEH recovery infrastructure.
+ */
+ int_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
+
+ if (!ipr_is_gscsi(res))
return FAILED;
list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) {
if (state == SCIC_RESET ||
state == SCIC_INITIALIZING ||
state == SCIC_INITIALIZED) {
+ u8 oem_version = pci_info->orom ? pci_info->orom->hdr.version :
+ ISCI_ROM_VER_1_0;
if (sci_oem_parameters_validate(&ihost->oem_parameters,
- pci_info->orom->hdr.version))
+ oem_version))
return SCI_FAILURE_INVALID_PARAMETER_VALUE;
return SCI_SUCCESS;
printk(MPT2SAS_ERR_FMT "%s: pci error recovery reset\n",
ioc->name, __func__);
r = 0;
- goto out;
+ goto out_unlocked;
}
if (mpt2sas_fwfault_debug)
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
mutex_unlock(&ioc->reset_in_progress_mutex);
+ out_unlocked:
dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit\n", ioc->name,
__func__));
return r;
#ifndef SCSI_OSD_MAJOR
# define SCSI_OSD_MAJOR 260
#endif
-#define SCSI_OSD_MAX_MINOR 64
+#define SCSI_OSD_MAX_MINOR MINORMASK
static const char osd_name[] = "osd";
-static const char *osd_version_string = "open-osd 0.2.0";
+static const char *osd_version_string = "open-osd 0.2.1";
MODULE_AUTHOR("Boaz Harrosh <bharrosh@panasas.com>");
MODULE_DESCRIPTION("open-osd Upper-Layer-Driver osd.ko");
vha->device_flags & DFLG_NO_CABLE)
len = snprintf(buf, PAGE_SIZE, "Link Down\n");
else if (atomic_read(&vha->loop_state) != LOOP_READY ||
- test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
+ qla2x00_reset_active(vha))
len = snprintf(buf, PAGE_SIZE, "Unknown Link State\n");
else {
len = snprintf(buf, PAGE_SIZE, "Link Up - ");
return snprintf(buf, PAGE_SIZE, "\n");
temp = frac = 0;
- if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
+ if (qla2x00_reset_active(vha))
ql_log(ql_log_warn, vha, 0x707b,
"ISP reset active.\n");
else if (!vha->hw->flags.eeh_busy)
int rval = QLA_FUNCTION_FAILED;
uint16_t state[5];
- if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
+ if (qla2x00_reset_active(vha))
ql_log(ql_log_warn, vha, 0x707c,
"ISP reset active.\n");
else if (!vha->hw->flags.eeh_busy)
if (IS_FWI2_CAPABLE(ha)) {
rval = qla24xx_get_isp_stats(base_vha, stats, stats_dma);
} else if (atomic_read(&base_vha->loop_state) == LOOP_READY &&
- !test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) &&
- !test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) &&
- !ha->dpc_active) {
+ !qla2x00_reset_active(vha) && !ha->dpc_active) {
/* Must be in a 'READY' state for statistics retrieval. */
rval = qla2x00_get_link_status(base_vha, base_vha->loop_id,
stats, stats_dma);
goto exit_fcp_prio_cfg;
}
- if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
- test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
- ret = -EBUSY;
- goto exit_fcp_prio_cfg;
- }
-
/* Get the sub command */
oper = bsg_job->request->rqst_data.h_vendor.vendor_cmd[1];
dma_addr_t rsp_data_dma;
uint32_t rsp_data_len;
- if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
- test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
- ql_log(ql_log_warn, vha, 0x7018, "Abort active or needed.\n");
- return -EBUSY;
- }
-
if (!vha->flags.online) {
ql_log(ql_log_warn, vha, 0x7019, "Host is not online.\n");
return -EIO;
int rval = 0;
uint32_t flag;
- if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
- test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
- ql_log(ql_log_warn, vha, 0x702e, "Abort active or needed.\n");
- return -EBUSY;
- }
-
if (!IS_QLA84XX(ha)) {
ql_dbg(ql_dbg_user, vha, 0x702f, "Not 84xx, exiting.\n");
return -EINVAL;
uint32_t flag;
uint32_t fw_ver;
- if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
- test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_RETRY, &vha->dpc_flags))
- return -EBUSY;
-
if (!IS_QLA84XX(ha)) {
ql_dbg(ql_dbg_user, vha, 0x7032,
"Not 84xx, exiting.\n");
uint32_t data_len = 0;
uint32_t dma_direction = DMA_NONE;
- if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
- test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
- ql_log(ql_log_warn, vha, 0x7039,
- "Abort active or needed.\n");
- return -EBUSY;
- }
-
if (!IS_QLA84XX(ha)) {
ql_log(ql_log_warn, vha, 0x703a,
"Not 84xx, exiting.\n");
bsg_job->reply->reply_payload_rcv_len = 0;
- if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
- test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
- test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
- ql_log(ql_log_warn, vha, 0x7045, "abort active or needed.\n");
- return -EBUSY;
- }
-
if (!IS_IIDMA_CAPABLE(vha->hw)) {
ql_log(ql_log_info, vha, 0x7046, "iiDMA not supported.\n");
return -EINVAL;
vha = shost_priv(host);
}
+ if (qla2x00_reset_active(vha)) {
+ ql_dbg(ql_dbg_user, vha, 0x709f,
+ "BSG: ISP abort active/needed -- cmd=%d.\n",
+ bsg_job->request->msgcode);
+ bsg_job->reply->result = (DID_ERROR << 16);
+ bsg_job->job_done(bsg_job);
+ return -EBUSY;
+ }
+
ql_dbg(ql_dbg_user, vha, 0x7000,
"Entered %s msgcode=0x%x.\n", __func__, bsg_job->request->msgcode);
* | DPC Thread | 0x401c | |
* | Async Events | 0x5057 | 0x5052 |
* | Timer Routines | 0x6011 | 0x600e,0x600f |
- * | User Space Interactions | 0x709e | |
+ * | User Space Interactions | 0x709e | 0x7018,0x702e |
+ * | | | 0x7039,0x7045 |
* | Task Management | 0x803c | 0x8025-0x8026 |
* | | | 0x800b,0x8039 |
* | AER/EEH | 0x900f | |
* ISP2100 HBAs.
*/
#define MAILBOX_REGISTER_COUNT_2100 8
+#define MAILBOX_REGISTER_COUNT_2200 24
#define MAILBOX_REGISTER_COUNT 32
#define QLA2200A_RISC_ROM_VER 4
}
return 0;
}
+
+static inline int
+qla2x00_reset_active(scsi_qla_host_t *vha)
+{
+ scsi_qla_host_t *base_vha = pci_get_drvdata(vha->hw->pdev);
+
+ /* Test appropriate base-vha and vha flags. */
+ return test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) ||
+ test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) ||
+ test_bit(ISP_ABORT_RETRY, &base_vha->dpc_flags) ||
+ test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
+ test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
+}
break;
case CT_IOCB_TYPE:
qla24xx_els_ct_entry(vha, rsp->req, pkt, CT_IOCB_TYPE);
- clear_bit(MBX_INTERRUPT, &vha->hw->mbx_cmd_flags);
break;
case ELS_IOCB_TYPE:
qla24xx_els_ct_entry(vha, rsp->req, pkt, ELS_IOCB_TYPE);
set_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
clear_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
+ /* Allow next mbx cmd to come in. */
+ complete(&ha->mbx_cmd_comp);
if (ha->isp_ops->abort_isp(vha)) {
/* Failed. retry later. */
set_bit(ISP_ABORT_NEEDED,
clear_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
ql_dbg(ql_dbg_mbx, base_vha, 0x101f,
"Finished abort_isp.\n");
+ goto mbx_done;
}
}
}
/* Allow next mbx cmd to come in. */
complete(&ha->mbx_cmd_comp);
+mbx_done:
if (rval) {
ql_dbg(ql_dbg_mbx, base_vha, 0x1020,
"**** Failed mbx[0]=%x, mb[1]=%x, mb[2]=%x, cmd=%x ****.\n",
ql_dbg(ql_dbg_mbx, vha, 0x10a1, "Entered %s.\n", __func__);
mcp->mb[0] = MBC_STOP_FIRMWARE;
- mcp->out_mb = MBX_0;
+ mcp->mb[1] = 0;
+ mcp->out_mb = MBX_1|MBX_0;
mcp->in_mb = MBX_0;
mcp->tov = 5;
mcp->flags = 0;
qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xfeffffff);
else
qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xffffffff);
-
- /* reset ms */
- val = qla82xx_rd_32(ha, QLA82XX_CRB_QDR_NET + 0xe4);
- val |= (1 << 1);
- qla82xx_wr_32(ha, QLA82XX_CRB_QDR_NET + 0xe4, val);
- msleep(20);
-
- /* unreset ms */
- val = qla82xx_rd_32(ha, QLA82XX_CRB_QDR_NET + 0xe4);
- val &= ~(1 << 1);
- qla82xx_wr_32(ha, QLA82XX_CRB_QDR_NET + 0xe4, val);
- msleep(20);
-
qla82xx_rom_unlock(ha);
/* Read the signature value from the flash.
QLA82XX_CRB_PEG_NET_3 + 0x3c),
qla82xx_rd_32(ha,
QLA82XX_CRB_PEG_NET_4 + 0x3c));
- if (LSW(MSB(halt_status)) == 0x67)
+ if (((halt_status & 0x1fffff00) >> 8) == 0x67)
ql_log(ql_log_warn, vha, 0xb052,
"Firmware aborted with "
"error code 0x00006700. Device is "
cmd->result = DID_NO_CONNECT << 16;
goto qc24_fail_command;
}
+
+ if (!fcport) {
+ cmd->result = DID_NO_CONNECT << 16;
+ goto qc24_fail_command;
+ }
+
if (atomic_read(&fcport->state) != FCS_ONLINE) {
if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
atomic_read(&base_vha->loop_state) == LOOP_DEAD) {
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (ha->isp_ops->abort_command(sp)) {
+ ret = FAILED;
ql_dbg(ql_dbg_taskm, vha, 0x8003,
"Abort command mbx failed cmd=%p.\n", cmd);
} else {
qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
{
scsi_qla_host_t *vha = shost_priv(cmd->device->host);
- fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
struct qla_hw_data *ha = vha->hw;
int ret = FAILED;
unsigned int id, lun;
id = cmd->device->id;
lun = cmd->device->lun;
- if (!fcport) {
- return ret;
- }
-
- ret = fc_block_scsi_eh(cmd);
- if (ret != 0)
- return ret;
- ret = FAILED;
-
ql_log(ql_log_info, vha, 0x8018,
"ADAPTER RESET ISSUED nexus=%ld:%d:%d.\n", vha->host_no, id, lun);
ha->nvram_data_off = ~0;
ha->isp_ops = &qla2100_isp_ops;
} else if (IS_QLA2200(ha)) {
- ha->mbx_count = MAILBOX_REGISTER_COUNT;
+ ha->mbx_count = MAILBOX_REGISTER_COUNT_2200;
req_length = REQUEST_ENTRY_CNT_2200;
rsp_length = RESPONSE_ENTRY_CNT_2100;
ha->max_loop_id = SNS_LAST_LOOP_ID_2100;
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.07.12-k"
+#define QLA2XXX_VERSION "8.03.07.13-k"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
#include "ql4_def.h"
#include "ql4_glbl.h"
+#include <asm-generic/io-64-nonatomic-lo-hi.h>
+
#define MASK(n) DMA_BIT_MASK(n)
#define MN_WIN(addr) (((addr & 0x1fc0000) >> 1) | ((addr >> 25) & 0x3ff))
#define OCM_WIN(addr) (((addr & 0x1ff0000) >> 1) | ((addr >> 25) & 0x3ff))
return 0;
}
-#ifndef readq
-static inline __u64 readq(const volatile void __iomem *addr)
-{
- const volatile u32 __iomem *p = addr;
- u32 low, high;
-
- low = readl(p);
- high = readl(p + 1);
-
- return low + ((u64)high << 32);
-}
-#endif
-
-#ifndef writeq
-static inline void writeq(__u64 val, volatile void __iomem *addr)
-{
- writel(val, addr);
- writel(val >> 32, addr+4);
-}
-#endif
-
static int qla4_8xxx_pci_mem_read_direct(struct scsi_qla_host *ha,
u64 off, void *data, int size)
{
#include <linux/pm_runtime.h>
#include <linux/export.h>
+#include <linux/async.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
return err;
}
+static int scsi_bus_prepare(struct device *dev)
+{
+ if (scsi_is_sdev_device(dev)) {
+ /* sd probing uses async_schedule. Wait until it finishes. */
+ async_synchronize_full();
+
+ } else if (scsi_is_host_device(dev)) {
+ /* Wait until async scanning is finished */
+ scsi_complete_async_scans();
+ }
+ return 0;
+}
+
static int scsi_bus_suspend(struct device *dev)
{
return scsi_bus_suspend_common(dev, PMSG_SUSPEND);
#else /* CONFIG_PM_SLEEP */
#define scsi_bus_resume_common NULL
+#define scsi_bus_prepare NULL
#define scsi_bus_suspend NULL
#define scsi_bus_freeze NULL
#define scsi_bus_poweroff NULL
#endif /* CONFIG_PM_RUNTIME */
const struct dev_pm_ops scsi_bus_pm_ops = {
+ .prepare = scsi_bus_prepare,
.suspend = scsi_bus_suspend,
.resume = scsi_bus_resume_common,
.freeze = scsi_bus_freeze,
#endif /* CONFIG_PROC_FS */
/* scsi_scan.c */
+extern int scsi_complete_async_scans(void);
extern int scsi_scan_host_selected(struct Scsi_Host *, unsigned int,
unsigned int, unsigned int, int);
extern void scsi_forget_host(struct Scsi_Host *);
}
spin_unlock(&async_scan_lock);
+ scsi_autopm_put_host(shost);
scsi_host_put(shost);
kfree(data);
}
do_scsi_scan_host(shost);
scsi_finish_async_scan(data);
- scsi_autopm_put_host(shost);
return 0;
}
p = kthread_run(do_scan_async, data, "scsi_scan_%d", shost->host_no);
if (IS_ERR(p))
do_scan_async(data);
- /* scsi_autopm_put_host(shost) is called in do_scan_async() */
+ /* scsi_autopm_put_host(shost) is called in scsi_finish_async_scan() */
}
EXPORT_SYMBOL(scsi_scan_host);
return -EINVAL;
}
- clk->parent = clk->parent_table[val];
+ clk_reparent(clk, clk->parent_table[val]);
if (!clk->parent) {
pr_err("sh_clk_init_parent: unable to set parent");
return -EINVAL;
#include <linux/circ_buf.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/io.h>
#include <linux/slab.h>
+#define PXA_NAME_LEN 8
+
struct uart_pxa_port {
struct uart_port port;
unsigned char ier;
unsigned char mcr;
unsigned int lsr_break_flag;
struct clk *clk;
- char *name;
+ char name[PXA_NAME_LEN];
};
static inline unsigned int serial_in(struct uart_pxa_port *up, int offset)
};
#endif
+static struct of_device_id serial_pxa_dt_ids[] = {
+ { .compatible = "mrvl,pxa-uart", },
+ { .compatible = "mrvl,mmp-uart", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, serial_pxa_dt_ids);
+
+static int serial_pxa_probe_dt(struct platform_device *pdev,
+ struct uart_pxa_port *sport)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int ret;
+
+ if (!np)
+ return 1;
+
+ ret = of_alias_get_id(np, "serial");
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
+ return ret;
+ }
+ sport->port.line = ret;
+ return 0;
+}
+
static int serial_pxa_probe(struct platform_device *dev)
{
struct uart_pxa_port *sport;
sport->port.irq = irqres->start;
sport->port.fifosize = 64;
sport->port.ops = &serial_pxa_pops;
- sport->port.line = dev->id;
sport->port.dev = &dev->dev;
sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
sport->port.uartclk = clk_get_rate(sport->clk);
- switch (dev->id) {
- case 0: sport->name = "FFUART"; break;
- case 1: sport->name = "BTUART"; break;
- case 2: sport->name = "STUART"; break;
- case 3: sport->name = "HWUART"; break;
- default:
- sport->name = "???";
- break;
- }
+ ret = serial_pxa_probe_dt(dev, sport);
+ if (ret > 0)
+ sport->port.line = dev->id;
+ else if (ret < 0)
+ goto err_clk;
+ snprintf(sport->name, PXA_NAME_LEN - 1, "UART%d", sport->port.line + 1);
sport->port.membase = ioremap(mmres->start, resource_size(mmres));
if (!sport->port.membase) {
goto err_clk;
}
- serial_pxa_ports[dev->id] = sport;
+ serial_pxa_ports[sport->port.line] = sport;
uart_add_one_port(&serial_pxa_reg, &sport->port);
platform_set_drvdata(dev, sport);
#ifdef CONFIG_PM
.pm = &serial_pxa_pm_ops,
#endif
+ .of_match_table = serial_pxa_dt_ids,
},
};
return -ENODEV;
dev->current_state = PCI_D0;
- if (!dev->irq) {
+ /* The xHCI driver supports MSI and MSI-X,
+ * so don't fail if the BIOS doesn't provide a legacy IRQ.
+ */
+ if (!dev->irq && (driver->flags & HCD_MASK) != HCD_USB3) {
dev_err(&dev->dev,
"Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
pci_name(dev));
&& device_can_wakeup(&hcd->self.root_hub->dev))
dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
- /* enable irqs just before we start the controller */
- if (usb_hcd_is_primary_hcd(hcd)) {
+ /* enable irqs just before we start the controller,
+ * if the BIOS provides legacy PCI irqs.
+ */
+ if (usb_hcd_is_primary_hcd(hcd) && irqnum) {
retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
if (retval)
goto err_request_irq;
if (type == HUB_INIT3)
goto init3;
- /* After a resume, port power should still be on.
+ /* The superspeed hub except for root hub has to use Hub Depth
+ * value as an offset into the route string to locate the bits
+ * it uses to determine the downstream port number. So hub driver
+ * should send a set hub depth request to superspeed hub after
+ * the superspeed hub is set configuration in initialization or
+ * reset procedure.
+ *
+ * After a resume, port power should still be on.
* For any other type of activation, turn it on.
*/
if (type != HUB_RESUME) {
+ if (hdev->parent && hub_is_superspeed(hdev)) {
+ ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+ HUB_SET_DEPTH, USB_RT_HUB,
+ hdev->level - 1, 0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ if (ret < 0)
+ dev_err(hub->intfdev,
+ "set hub depth failed\n");
+ }
/* Speed up system boot by using a delayed_work for the
* hub's initial power-up delays. This is pretty awkward
goto fail;
}
- if (hub_is_superspeed(hdev) && (hdev->parent != NULL)) {
- ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
- HUB_SET_DEPTH, USB_RT_HUB,
- hdev->level - 1, 0, NULL, 0,
- USB_CTRL_SET_TIMEOUT);
-
- if (ret < 0) {
- message = "can't set hub depth";
- goto fail;
- }
- }
-
/* Request the entire hub descriptor.
* hub->descriptor can handle USB_MAXCHILDREN ports,
* but the hub can/will return fewer bytes here.
*/
if (pdev->vendor == 0x184e) /* vendor Netlogic */
return;
+ if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI &&
+ pdev->class != PCI_CLASS_SERIAL_USB_OHCI &&
+ pdev->class != PCI_CLASS_SERIAL_USB_EHCI &&
+ pdev->class != PCI_CLASS_SERIAL_USB_XHCI)
+ return;
+ if (pci_enable_device(pdev) < 0) {
+ dev_warn(&pdev->dev, "Can't enable PCI device, "
+ "BIOS handoff failed.\n");
+ return;
+ }
if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
quirk_usb_handoff_uhci(pdev);
else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)
quirk_usb_disable_ehci(pdev);
else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI)
quirk_usb_handoff_xhci(pdev);
+ pci_disable_device(pdev);
}
DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
*/
memset(port_removable, 0, sizeof(port_removable));
for (i = 0; i < ports; i++) {
- portsc = xhci_readl(xhci, xhci->usb3_ports[i]);
+ portsc = xhci_readl(xhci, xhci->usb2_ports[i]);
/* If a device is removable, PORTSC reports a 0, same as in the
* hub descriptor DeviceRemovable bits.
*/
}
/*
- * Convert bInterval expressed in frames (in 1-255 range) to exponent of
+ * Convert bInterval expressed in microframes (in 1-255 range) to exponent of
* microframes, rounded down to nearest power of 2.
*/
-static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
- struct usb_host_endpoint *ep)
+static unsigned int xhci_microframes_to_exponent(struct usb_device *udev,
+ struct usb_host_endpoint *ep, unsigned int desc_interval,
+ unsigned int min_exponent, unsigned int max_exponent)
{
unsigned int interval;
- interval = fls(8 * ep->desc.bInterval) - 1;
- interval = clamp_val(interval, 3, 10);
- if ((1 << interval) != 8 * ep->desc.bInterval)
+ interval = fls(desc_interval) - 1;
+ interval = clamp_val(interval, min_exponent, max_exponent);
+ if ((1 << interval) != desc_interval)
dev_warn(&udev->dev,
"ep %#x - rounding interval to %d microframes, ep desc says %d microframes\n",
ep->desc.bEndpointAddress,
1 << interval,
- 8 * ep->desc.bInterval);
+ desc_interval);
return interval;
}
+static unsigned int xhci_parse_microframe_interval(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ return xhci_microframes_to_exponent(udev, ep,
+ ep->desc.bInterval, 0, 15);
+}
+
+
+static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ return xhci_microframes_to_exponent(udev, ep,
+ ep->desc.bInterval * 8, 3, 10);
+}
+
/* Return the polling or NAK interval.
*
* The polling interval is expressed in "microframes". If xHCI's Interval field
/* Max NAK rate */
if (usb_endpoint_xfer_control(&ep->desc) ||
usb_endpoint_xfer_bulk(&ep->desc)) {
- interval = ep->desc.bInterval;
+ interval = xhci_parse_microframe_interval(udev, ep);
break;
}
/* Fall through - SS and HS isoc/int have same decoding */
/* hcd->irq is -1, we have MSI */
return 0;
+ if (!pdev->irq) {
+ xhci_err(xhci, "No msi-x/msi found and no IRQ in BIOS\n");
+ return -EINVAL;
+ }
+
/* fall back to legacy interrupt*/
ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
hcd->irq_descr, hcd);
{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
{ USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
{ USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
+ { USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
+ { USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff),
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
- /* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0026, 0xff, 0xff, 0xff) }, */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
- /* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0053, 0xff, 0xff, 0xff) }, */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff),
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0067, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0069, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0076, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0077, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0078, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0095, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0096, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0097, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0098, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0099, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0104, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0105, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0143, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0144, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0145, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0146, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0148, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0149, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0150, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0151, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0153, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0155, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0160, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0164, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1401, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1403, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1404, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1405, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1406, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1407, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1408, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1409, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1410, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1411, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1412, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1413, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1414, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1415, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1416, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1417, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1418, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1419, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1420, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1421, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1422, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1423, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1424, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1425, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1427, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1429, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1430, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1431, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1432, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1433, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1434, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1435, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1436, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1437, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1438, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1439, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1440, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1441, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1442, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1443, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1444, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1445, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1446, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1447, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1448, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1449, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1450, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1451, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1452, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1453, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1454, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1455, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1456, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1457, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1458, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1459, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1460, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1461, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1462, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1463, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1464, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1465, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1466, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1467, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1468, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1469, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1470, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1471, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1472, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1473, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1474, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1475, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1476, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1477, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1478, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1479, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1480, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1481, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1482, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1483, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1484, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1485, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1486, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1487, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1488, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1489, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1490, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1491, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1492, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1493, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1494, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1495, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1496, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1497, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1498, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1499, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1500, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1501, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1502, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1503, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1504, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1505, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1506, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1507, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1508, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1509, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1510, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
+ 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
+
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0027, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
- 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff) },
+
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
/* the array dimension is the number of default entries plus */
/* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
/* null entry */
-static struct usb_device_id ti_id_table_3410[13+TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_3410[14+TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
+ { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
};
static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
};
-static struct usb_device_id ti_id_table_combined[17+2*TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_combined[18+2*TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
+ { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
{ }
};
#define MTS_MT9234ZBA_PRODUCT_ID 0xF115
#define MTS_MT9234ZBAOLD_PRODUCT_ID 0x0319
+/* Abbott Diabetics vendor and product ids */
+#define ABBOTT_VENDOR_ID 0x1a61
+#define ABBOTT_PRODUCT_ID 0x3410
+
/* Commands */
#define TI_GET_VERSION 0x01
#define TI_GET_PORT_STATUS 0x02
struct Scsi_Host *host = us_to_host(us);
/* If the device is really gone, cut short reset delays */
- if (us->pusb_dev->state == USB_STATE_NOTATTACHED)
+ if (us->pusb_dev->state == USB_STATE_NOTATTACHED) {
set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
+ wake_up(&us->delay_wait);
+ }
- /* Prevent SCSI-scanning (if it hasn't started yet)
- * and wait for the SCSI-scanning thread to stop.
+ /* Prevent SCSI scanning (if it hasn't started yet)
+ * or wait for the SCSI-scanning routine to stop.
*/
- set_bit(US_FLIDX_DONT_SCAN, &us->dflags);
- wake_up(&us->delay_wait);
- wait_for_completion(&us->scanning_done);
+ cancel_delayed_work_sync(&us->scan_dwork);
+
+ /* Balance autopm calls if scanning was cancelled */
+ if (test_bit(US_FLIDX_SCAN_PENDING, &us->dflags))
+ usb_autopm_put_interface_no_suspend(us->pusb_intf);
/* Removing the host will perform an orderly shutdown: caches
* synchronized, disks spun down, etc.
scsi_host_put(us_to_host(us));
}
-/* Thread to carry out delayed SCSI-device scanning */
-static int usb_stor_scan_thread(void * __us)
+/* Delayed-work routine to carry out SCSI-device scanning */
+static void usb_stor_scan_dwork(struct work_struct *work)
{
- struct us_data *us = (struct us_data *)__us;
+ struct us_data *us = container_of(work, struct us_data,
+ scan_dwork.work);
struct device *dev = &us->pusb_intf->dev;
- dev_dbg(dev, "device found\n");
-
- set_freezable();
+ dev_dbg(dev, "starting scan\n");
- /*
- * Wait for the timeout to expire or for a disconnect
- *
- * We can't freeze in this thread or we risk causing khubd to
- * fail to freeze, but we can't be non-freezable either. Nor can
- * khubd freeze while waiting for scanning to complete as it may
- * hold the device lock, causing a hang when suspending devices.
- * So instead of using wait_event_freezable(), explicitly test
- * for (DONT_SCAN || freezing) in interruptible wait and proceed
- * if any of DONT_SCAN, freezing or timeout has happened.
- */
- if (delay_use > 0) {
- dev_dbg(dev, "waiting for device to settle "
- "before scanning\n");
- wait_event_interruptible_timeout(us->delay_wait,
- test_bit(US_FLIDX_DONT_SCAN, &us->dflags) ||
- freezing(current), delay_use * HZ);
+ /* For bulk-only devices, determine the max LUN value */
+ if (us->protocol == USB_PR_BULK && !(us->fflags & US_FL_SINGLE_LUN)) {
+ mutex_lock(&us->dev_mutex);
+ us->max_lun = usb_stor_Bulk_max_lun(us);
+ mutex_unlock(&us->dev_mutex);
}
+ scsi_scan_host(us_to_host(us));
+ dev_dbg(dev, "scan complete\n");
- /* If the device is still connected, perform the scanning */
- if (!test_bit(US_FLIDX_DONT_SCAN, &us->dflags)) {
-
- /* For bulk-only devices, determine the max LUN value */
- if (us->protocol == USB_PR_BULK &&
- !(us->fflags & US_FL_SINGLE_LUN)) {
- mutex_lock(&us->dev_mutex);
- us->max_lun = usb_stor_Bulk_max_lun(us);
- mutex_unlock(&us->dev_mutex);
- }
- scsi_scan_host(us_to_host(us));
- dev_dbg(dev, "scan complete\n");
-
- /* Should we unbind if no devices were detected? */
- }
+ /* Should we unbind if no devices were detected? */
usb_autopm_put_interface(us->pusb_intf);
- complete_and_exit(&us->scanning_done, 0);
+ clear_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
}
static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf)
init_completion(&us->cmnd_ready);
init_completion(&(us->notify));
init_waitqueue_head(&us->delay_wait);
- init_completion(&us->scanning_done);
+ INIT_DELAYED_WORK(&us->scan_dwork, usb_stor_scan_dwork);
/* Associate the us_data structure with the USB device */
result = associate_dev(us, intf);
/* Second part of general USB mass-storage probing */
int usb_stor_probe2(struct us_data *us)
{
- struct task_struct *th;
int result;
struct device *dev = &us->pusb_intf->dev;
goto BadDevice;
}
- /* Start up the thread for delayed SCSI-device scanning */
- th = kthread_create(usb_stor_scan_thread, us, "usb-stor-scan");
- if (IS_ERR(th)) {
- dev_warn(dev,
- "Unable to start the device-scanning thread\n");
- complete(&us->scanning_done);
- quiesce_and_remove_host(us);
- result = PTR_ERR(th);
- goto BadDevice;
- }
-
+ /* Submit the delayed_work for SCSI-device scanning */
usb_autopm_get_interface_no_resume(us->pusb_intf);
- wake_up_process(th);
+ set_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
+ if (delay_use > 0)
+ dev_dbg(dev, "waiting for device to settle before scanning\n");
+ queue_delayed_work(system_freezable_wq, &us->scan_dwork,
+ delay_use * HZ);
return 0;
/* We come here if there are any problems */
#include <linux/blkdev.h>
#include <linux/completion.h>
#include <linux/mutex.h>
+#include <linux/workqueue.h>
#include <scsi/scsi_host.h>
struct us_data;
#define US_FLIDX_DISCONNECTING 3 /* disconnect in progress */
#define US_FLIDX_RESETTING 4 /* device reset in progress */
#define US_FLIDX_TIMED_OUT 5 /* SCSI midlayer timed out */
-#define US_FLIDX_DONT_SCAN 6 /* don't scan (disconnect) */
+#define US_FLIDX_SCAN_PENDING 6 /* scanning not yet done */
#define US_FLIDX_REDO_READ10 7 /* redo READ(10) command */
#define US_FLIDX_READ10_WORKED 8 /* previous READ(10) succeeded */
/* mutual exclusion and synchronization structures */
struct completion cmnd_ready; /* to sleep thread on */
struct completion notify; /* thread begin/end */
- wait_queue_head_t delay_wait; /* wait during scan, reset */
- struct completion scanning_done; /* wait for scan thread */
+ wait_queue_head_t delay_wait; /* wait during reset */
+ struct delayed_work scan_dwork; /* for async scanning */
/* subdriver information */
void *extra; /* Any extra data */
config PANEL_DVI
tristate "DVI output"
- depends on OMAP2_DSS_DPI
+ depends on OMAP2_DSS_DPI && I2C
help
Driver for external monitors, connected via DVI. The driver uses i2c
to read EDID information from the monitor.
spin_unlock_irqrestore(&data_lock, flags);
+ /* wait for overlay to be enabled */
+ wait_pending_extra_info_updates();
+
mutex_unlock(&apply_lock);
return 0;
spin_unlock_irqrestore(&data_lock, flags);
+ /* wait for the overlay to be disabled */
+ wait_pending_extra_info_updates();
+
mutex_unlock(&apply_lock);
return 0;
DSSDBG("hdmi_runtime_get\n");
+ /*
+ * HACK: Add dss_runtime_get() to ensure DSS clock domain is enabled.
+ * This should be removed later.
+ */
+ r = dss_runtime_get();
+ if (r < 0)
+ goto err_get_dss;
+
r = pm_runtime_get_sync(&hdmi.pdev->dev);
WARN_ON(r < 0);
- return r < 0 ? r : 0;
+ if (r < 0)
+ goto err_get_hdmi;
+
+ return 0;
+
+err_get_hdmi:
+ dss_runtime_put();
+err_get_dss:
+ return r;
}
static void hdmi_runtime_put(void)
r = pm_runtime_put_sync(&hdmi.pdev->dev);
WARN_ON(r < 0);
+
+ /*
+ * HACK: This is added to complement the dss_runtime_get() call in
+ * hdmi_runtime_get(). This should be removed later.
+ */
+ dss_runtime_put();
}
int hdmi_init_display(struct omap_dss_device *dssdev)
bool ti_hdmi_4xxx_detect(struct hdmi_ip_data *ip_data)
{
- int r;
-
- void __iomem *base = hdmi_core_sys_base(ip_data);
-
- /* HPD */
- r = REG_GET(base, HDMI_CORE_SYS_SYS_STAT, 1, 1);
-
- return r == 1;
+ return gpio_get_value(ip_data->hpd_gpio);
}
static void hdmi_core_init(struct hdmi_core_video_config *video_cfg,
int (*init)(void);
void (*exit)(void);
char name[16];
-} board_driver[] = {
+} board_driver[] __refdata = {
#ifdef CONFIG_SH_DREAMCAST
{ pvr2fb_dc_init, pvr2fb_dc_exit, "Sega DC PVR2" },
#endif
break;
}
+ /* magic required on VX900 for correct modesetting on IGA1 */
+ via_write_reg_mask(VIACR, 0x45, 0x00, 0x01);
+
/* probably this should go to the scaling code one day */
+ via_write_reg_mask(VIACR, 0xFD, 0, 0x80); /* VX900 hw scale on IGA2 */
viafb_write_regx(scaling_parameters, ARRAY_SIZE(scaling_parameters));
/* Fill VPIT Parameters */
#ifdef CONFIG_PM
static int virtballoon_freeze(struct virtio_device *vdev)
{
+ struct virtio_balloon *vb = vdev->priv;
+
/*
* The kthread is already frozen by the PM core before this
* function is called.
*/
+ while (vb->num_pages)
+ leak_balloon(vb, vb->num_pages);
+ update_balloon_size(vb);
+
/* Ensure we don't get any more requests from the host */
vdev->config->reset(vdev);
vdev->config->del_vqs(vdev);
return 0;
}
+static int restore_common(struct virtio_device *vdev)
+{
+ struct virtio_balloon *vb = vdev->priv;
+ int ret;
+
+ ret = init_vqs(vdev->priv);
+ if (ret)
+ return ret;
+
+ fill_balloon(vb, towards_target(vb));
+ update_balloon_size(vb);
+ return 0;
+}
+
static int virtballoon_thaw(struct virtio_device *vdev)
{
- return init_vqs(vdev->priv);
+ return restore_common(vdev);
}
static int virtballoon_restore(struct virtio_device *vdev)
{
struct virtio_balloon *vb = vdev->priv;
- struct page *page, *page2;
-
- /* We're starting from a clean slate */
- vb->num_pages = 0;
/*
* If a request wasn't complete at the time of freezing, this
*/
vb->need_stats_update = 0;
- /* We don't have these pages in the balloon anymore! */
- list_for_each_entry_safe(page, page2, &vb->pages, lru) {
- list_del(&page->lru);
- totalram_pages++;
- }
- return init_vqs(vdev->priv);
+ return restore_common(vdev);
}
#endif
For Freescale Book-E processors, this is a number between 0 and 63.
For other Book-E processors, this is a number between 0 and 3.
- The value can be overidden by the wdt_period command-line parameter.
+ The value can be overridden by the wdt_period command-line parameter.
# PPC64 Architecture
booke_wdt_period = tmp;
#endif
booke_wdt_set();
- return 0;
+ /* Fall */
case WDIOC_GETTIMEOUT:
+#ifdef CONFIG_FSL_BOOKE
+ return put_user(period_to_sec(booke_wdt_period), p);
+#else
return put_user(booke_wdt_period, p);
+#endif
default:
return -ENOTTY;
}
cmn_regs.u1.reax = CRU_BIOS_SIGNATURE_VALUE;
- set_memory_x((unsigned long)bios32_entrypoint, (2 * PAGE_SIZE));
+ set_memory_x((unsigned long)bios32_map, 2);
asminline_call(&cmn_regs, bios32_entrypoint);
if (cmn_regs.u1.ral != 0) {
cru_rom_addr =
ioremap(cru_physical_address, cru_length);
if (cru_rom_addr) {
- set_memory_x((unsigned long)cru_rom_addr, cru_length);
+ set_memory_x((unsigned long)cru_rom_addr & PAGE_MASK,
+ (cru_length + PAGE_SIZE - 1) >> PAGE_SHIFT);
retval = 0;
}
}
wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (wdt_mem == NULL) {
printk(KERN_INFO MODULE_NAME
- "failed to get memory region resouce\n");
+ "failed to get memory region resource\n");
return -ENOENT;
}
dev = &pdev->dev;
wdt_dev = &pdev->dev;
- /* get the memory region for the watchdog timer */
-
wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (wdt_mem == NULL) {
dev_err(dev, "no memory resource specified\n");
return -ENOENT;
}
+ wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (wdt_irq == NULL) {
+ dev_err(dev, "no irq resource specified\n");
+ ret = -ENOENT;
+ goto err;
+ }
+
+ /* get the memory region for the watchdog timer */
+
size = resource_size(wdt_mem);
if (!request_mem_region(wdt_mem->start, size, pdev->name)) {
dev_err(dev, "failed to get memory region\n");
- return -EBUSY;
+ ret = -EBUSY;
+ goto err;
}
wdt_base = ioremap(wdt_mem->start, size);
DBG("probe: mapped wdt_base=%p\n", wdt_base);
- wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (wdt_irq == NULL) {
- dev_err(dev, "no irq resource specified\n");
- ret = -ENOENT;
- goto err_map;
- }
-
- ret = request_irq(wdt_irq->start, s3c2410wdt_irq, 0, pdev->name, pdev);
- if (ret != 0) {
- dev_err(dev, "failed to install irq (%d)\n", ret);
- goto err_map;
- }
-
wdt_clock = clk_get(&pdev->dev, "watchdog");
if (IS_ERR(wdt_clock)) {
dev_err(dev, "failed to find watchdog clock source\n");
ret = PTR_ERR(wdt_clock);
- goto err_irq;
+ goto err_map;
}
clk_enable(wdt_clock);
- if (s3c2410wdt_cpufreq_register() < 0) {
+ ret = s3c2410wdt_cpufreq_register();
+ if (ret < 0) {
printk(KERN_ERR PFX "failed to register cpufreq\n");
goto err_clk;
}
"cannot start\n");
}
+ ret = request_irq(wdt_irq->start, s3c2410wdt_irq, 0, pdev->name, pdev);
+ if (ret != 0) {
+ dev_err(dev, "failed to install irq (%d)\n", ret);
+ goto err_cpufreq;
+ }
+
watchdog_set_nowayout(&s3c2410_wdd, nowayout);
ret = watchdog_register_device(&s3c2410_wdd);
if (ret) {
dev_err(dev, "cannot register watchdog (%d)\n", ret);
- goto err_cpufreq;
+ goto err_irq;
}
if (tmr_atboot && started == 0) {
return 0;
+ err_irq:
+ free_irq(wdt_irq->start, pdev);
+
err_cpufreq:
s3c2410wdt_cpufreq_deregister();
err_clk:
clk_disable(wdt_clock);
clk_put(wdt_clock);
-
- err_irq:
- free_irq(wdt_irq->start, pdev);
+ wdt_clock = NULL;
err_map:
iounmap(wdt_base);
err_req:
release_mem_region(wdt_mem->start, size);
- wdt_mem = NULL;
+ err:
+ wdt_irq = NULL;
+ wdt_mem = NULL;
return ret;
}
{
watchdog_unregister_device(&s3c2410_wdd);
+ free_irq(wdt_irq->start, dev);
+
s3c2410wdt_cpufreq_deregister();
clk_disable(wdt_clock);
clk_put(wdt_clock);
wdt_clock = NULL;
- free_irq(wdt_irq->start, dev);
- wdt_irq = NULL;
-
iounmap(wdt_base);
release_mem_region(wdt_mem->start, resource_size(wdt_mem));
+ wdt_irq = NULL;
wdt_mem = NULL;
return 0;
}
sprintf(dir, "cpu/%u", cpu);
err = xenbus_scanf(XBT_NIL, dir, "availability", "%s", state);
if (err != 1) {
- printk(KERN_ERR "XENBUS: Unable to read cpu state\n");
+ if (!xen_initial_domain())
+ printk(KERN_ERR "XENBUS: Unable to read cpu state\n");
return err;
}
int err;
err =
- sscanf(buf, " %04x:%02x:%02x.%1x-%08x:%1x:%08x", domain, bus, slot,
+ sscanf(buf, " %04x:%02x:%02x.%d-%08x:%1x:%08x", domain, bus, slot,
func, reg, size, mask);
if (err == 7)
return 0;
pci_dev_id->bus = bus;
pci_dev_id->devfn = PCI_DEVFN(slot, func);
- pr_debug(DRV_NAME ": wants to seize %04x:%02x:%02x.%01x\n",
+ pr_debug(DRV_NAME ": wants to seize %04x:%02x:%02x.%d\n",
domain, bus, slot, func);
spin_lock_irqsave(&device_ids_lock, flags);
err = 0;
- pr_debug(DRV_NAME ": removed %04x:%02x:%02x.%01x from "
+ pr_debug(DRV_NAME ": removed %04x:%02x:%02x.%d from "
"seize list\n", domain, bus, slot, func);
}
}
break;
count += scnprintf(buf + count, PAGE_SIZE - count,
- "%04x:%02x:%02x.%01x\n",
+ "%04x:%02x:%02x.%d\n",
pci_dev_id->domain, pci_dev_id->bus,
PCI_SLOT(pci_dev_id->devfn),
PCI_FUNC(pci_dev_id->devfn));
goto out;
}
+ /* Note: The PV protocol uses %02x, don't change it */
err = xenbus_printf(XBT_NIL, pdev->xdev->nodename, str,
"%04x:%02x:%02x.%02x", domain, bus,
PCI_SLOT(devfn), PCI_FUNC(devfn));
err = -EINVAL;
xenbus_dev_fatal(pdev->xdev, err,
"Couldn't locate PCI device "
- "(%04x:%02x:%02x.%01x)! "
+ "(%04x:%02x:%02x.%d)! "
"perhaps already in-use?",
domain, bus, slot, func);
goto out;
if (!dev) {
err = -EINVAL;
dev_dbg(&pdev->xdev->dev, "Couldn't locate PCI device "
- "(%04x:%02x:%02x.%01x)! not owned by this domain\n",
+ "(%04x:%02x:%02x.%d)! not owned by this domain\n",
domain, bus, slot, func);
goto out;
}
goto out;
}
token++;
+ if (memchr(token, 0, u->u.msg.len - (token - path)) == NULL) {
+ rc = -EILSEQ;
+ goto out;
+ }
if (msg_type == XS_WATCH) {
watch = alloc_watch_adapter(path, token);
int sub_version;
int min_proto;
int max_proto;
+ int compat_daemon;
unsigned long exp_timeout;
unsigned int type;
int reghost_enabled;
sbi->pipefd = pipefd;
sbi->pipe = pipe;
sbi->catatonic = 0;
+ sbi->compat_daemon = is_compat_task();
}
out:
mutex_unlock(&sbi->wq_mutex);
/* Negative dentry - try next */
if (!simple_positive(q)) {
spin_unlock(&p->d_lock);
+ lock_set_subclass(&q->d_lock.dep_map, 0, _RET_IP_);
p = q;
goto again;
}
/* Negative dentry - try next */
if (!simple_positive(ret)) {
spin_unlock(&p->d_lock);
+ lock_set_subclass(&ret->d_lock.dep_map, 0, _RET_IP_);
p = ret;
goto again;
}
#include <linux/parser.h>
#include <linux/bitops.h>
#include <linux/magic.h>
+#include <linux/compat.h>
#include "autofs_i.h"
#include <linux/module.h>
set_autofs_type_indirect(&sbi->type);
sbi->min_proto = 0;
sbi->max_proto = 0;
+ sbi->compat_daemon = is_compat_task();
mutex_init(&sbi->wq_mutex);
mutex_init(&sbi->pipe_mutex);
spin_lock_init(&sbi->fs_lock);
return (bytes > 0);
}
-
+
+/*
+ * The autofs_v5 packet was misdesigned.
+ *
+ * The packets are identical on x86-32 and x86-64, but have different
+ * alignment. Which means that 'sizeof()' will give different results.
+ * Fix it up for the case of running 32-bit user mode on a 64-bit kernel.
+ */
+static noinline size_t autofs_v5_packet_size(struct autofs_sb_info *sbi)
+{
+ size_t pktsz = sizeof(struct autofs_v5_packet);
+#if defined(CONFIG_X86_64) && defined(CONFIG_COMPAT)
+ if (sbi->compat_daemon > 0)
+ pktsz -= 4;
+#endif
+ return pktsz;
+}
+
static void autofs4_notify_daemon(struct autofs_sb_info *sbi,
struct autofs_wait_queue *wq,
int type)
{
struct autofs_v5_packet *packet = &pkt.v5_pkt.v5_packet;
- pktsz = sizeof(*packet);
-
+ pktsz = autofs_v5_packet_size(sbi);
packet->wait_queue_token = wq->wait_queue_token;
packet->len = wq->name.len;
memcpy(packet->name, wq->name.name, wq->name.len);
for (i = 1; i < view->n; ++i) {
const struct user_regset *regset = &view->regsets[i];
do_thread_regset_writeback(t->task, regset);
- if (regset->core_note_type &&
+ if (regset->core_note_type && regset->get &&
(!regset->active || regset->active(t->task, regset))) {
int ret;
size_t size = regset->n * regset->size;
if (eb != eb_in)
free_extent_buffer(eb);
ret = inode_ref_info(parent, 0, fs_root, path, &found_key);
+ if (ret > 0)
+ ret = -ENOENT;
if (ret)
break;
next_inum = found_key.offset;
static int btrfsic_process_superblock(struct btrfsic_state *state,
struct btrfs_fs_devices *fs_devices)
{
- int ret;
+ int ret = 0;
struct btrfs_super_block *selected_super;
struct list_head *dev_head = &fs_devices->devices;
struct btrfs_device *device;
page_offset(bio->bi_io_vec->bv_page),
PAGE_CACHE_SIZE);
read_unlock(&em_tree->lock);
+ if (!em)
+ return -EIO;
compressed_len = em->block_len;
cb = kmalloc(compressed_bio_size(root, compressed_len), GFP_NOFS);
u64 reserved;
struct btrfs_space_info *space_info;
spinlock_t lock;
- unsigned int full:1;
+ unsigned int full;
};
/*
goto fail_sb_buffer;
}
+ if (sectorsize < PAGE_SIZE) {
+ printk(KERN_WARNING "btrfs: Incompatible sector size "
+ "found on %s\n", sb->s_id);
+ goto fail_sb_buffer;
+ }
+
mutex_lock(&fs_info->chunk_mutex);
ret = btrfs_read_sys_array(tree_root);
mutex_unlock(&fs_info->chunk_mutex);
btrfs_close_extra_devices(fs_devices);
+ if (!fs_devices->latest_bdev) {
+ printk(KERN_CRIT "btrfs: failed to read devices on %s\n",
+ sb->s_id);
+ goto fail_tree_roots;
+ }
+
retry_root_backup:
blocksize = btrfs_level_size(tree_root,
btrfs_super_root_level(disk_super));
}
data_sinfo->bytes_may_use += bytes;
trace_btrfs_space_reservation(root->fs_info, "space_info",
- (u64)data_sinfo, bytes, 1);
+ (u64)(unsigned long)data_sinfo,
+ bytes, 1);
spin_unlock(&data_sinfo->lock);
return 0;
spin_lock(&data_sinfo->lock);
data_sinfo->bytes_may_use -= bytes;
trace_btrfs_space_reservation(root->fs_info, "space_info",
- (u64)data_sinfo, bytes, 0);
+ (u64)(unsigned long)data_sinfo,
+ bytes, 0);
spin_unlock(&data_sinfo->lock);
}
if (space_info != delayed_rsv->space_info)
return -ENOSPC;
+ spin_lock(&space_info->lock);
spin_lock(&delayed_rsv->lock);
- if (delayed_rsv->size < bytes) {
+ if (space_info->bytes_pinned + delayed_rsv->size < bytes) {
spin_unlock(&delayed_rsv->lock);
+ spin_unlock(&space_info->lock);
return -ENOSPC;
}
spin_unlock(&delayed_rsv->lock);
+ spin_unlock(&space_info->lock);
commit:
trans = btrfs_join_transaction(root);
if (used + orig_bytes <= space_info->total_bytes) {
space_info->bytes_may_use += orig_bytes;
trace_btrfs_space_reservation(root->fs_info,
- "space_info",
- (u64)space_info,
- orig_bytes, 1);
+ "space_info",
+ (u64)(unsigned long)space_info,
+ orig_bytes, 1);
ret = 0;
} else {
/*
if (used + num_bytes < space_info->total_bytes + avail) {
space_info->bytes_may_use += orig_bytes;
trace_btrfs_space_reservation(root->fs_info,
- "space_info",
- (u64)space_info,
- orig_bytes, 1);
+ "space_info",
+ (u64)(unsigned long)space_info,
+ orig_bytes, 1);
ret = 0;
} else {
wait_ordered = true;
spin_lock(&space_info->lock);
space_info->bytes_may_use -= num_bytes;
trace_btrfs_space_reservation(fs_info, "space_info",
- (u64)space_info,
- num_bytes, 0);
+ (u64)(unsigned long)space_info,
+ num_bytes, 0);
space_info->reservation_progress++;
spin_unlock(&space_info->lock);
}
num_bytes += div64_u64(data_used + meta_used, 50);
if (num_bytes * 3 > meta_used)
- num_bytes = div64_u64(meta_used, 3);
+ num_bytes = div64_u64(meta_used, 3) * 2;
return ALIGN(num_bytes, fs_info->extent_root->leafsize << 10);
}
block_rsv->reserved += num_bytes;
sinfo->bytes_may_use += num_bytes;
trace_btrfs_space_reservation(fs_info, "space_info",
- (u64)sinfo, num_bytes, 1);
+ (u64)(unsigned long)sinfo, num_bytes, 1);
}
if (block_rsv->reserved >= block_rsv->size) {
num_bytes = block_rsv->reserved - block_rsv->size;
sinfo->bytes_may_use -= num_bytes;
trace_btrfs_space_reservation(fs_info, "space_info",
- (u64)sinfo, num_bytes, 0);
+ (u64)(unsigned long)sinfo, num_bytes, 0);
sinfo->reservation_progress++;
block_rsv->reserved = block_rsv->size;
block_rsv->full = 1;
if (!trans->bytes_reserved)
return;
- trace_btrfs_space_reservation(root->fs_info, "transaction", (u64)trans,
+ trace_btrfs_space_reservation(root->fs_info, "transaction",
+ (u64)(unsigned long)trans,
trans->bytes_reserved, 0);
btrfs_block_rsv_release(root, trans->block_rsv, trans->bytes_reserved);
trans->bytes_reserved = 0;
space_info->bytes_reserved += num_bytes;
if (reserve == RESERVE_ALLOC) {
trace_btrfs_space_reservation(cache->fs_info,
- "space_info",
- (u64)space_info,
- num_bytes, 0);
+ "space_info",
+ (u64)(unsigned long)space_info,
+ num_bytes, 0);
space_info->bytes_may_use -= num_bytes;
}
}
u64 start;
u64 end;
u64 trimmed = 0;
+ u64 total_bytes = btrfs_super_total_bytes(fs_info->super_copy);
int ret = 0;
- cache = btrfs_lookup_block_group(fs_info, range->start);
+ /*
+ * try to trim all FS space, our block group may start from non-zero.
+ */
+ if (range->len == total_bytes)
+ cache = btrfs_lookup_first_block_group(fs_info, range->start);
+ else
+ cache = btrfs_lookup_block_group(fs_info, range->start);
while (cache) {
if (cache->key.objectid >= (range->start + range->len)) {
WARN_ON(state->end < start);
last_end = state->end;
+ if (state->end < end && !need_resched())
+ next_node = rb_next(&state->rb_node);
+ else
+ next_node = NULL;
+
+ /* the state doesn't have the wanted bits, go ahead */
+ if (!(state->state & bits))
+ goto next;
+
/*
* | ---- desired range ---- |
* | state | or
goto out;
}
- if (state->end < end && prealloc && !need_resched())
- next_node = rb_next(&state->rb_node);
- else
- next_node = NULL;
-
set |= clear_state_bit(tree, state, &bits, wake);
+next:
if (last_end == (u64)-1)
goto out;
start = last_end + 1;
if (start <= end && next_node) {
state = rb_entry(next_node, struct extent_state,
rb_node);
- if (state->start == start)
- goto hit_next;
+ goto hit_next;
}
goto search_again;
set_state_bits(tree, state, &bits);
clear_state_bit(tree, state, &clear_bits, 0);
-
- merge_state(tree, state);
if (last_end == (u64)-1)
goto out;
if (state->end <= end) {
set_state_bits(tree, state, &bits);
clear_state_bit(tree, state, &clear_bits, 0);
- merge_state(tree, state);
if (last_end == (u64)-1)
goto out;
start = last_end + 1;
set_state_bits(tree, prealloc, &bits);
clear_state_bit(tree, prealloc, &clear_bits, 0);
-
- merge_state(tree, prealloc);
prealloc = NULL;
goto out;
}
"this_mirror=%d, num_copies=%d, in_validation=%d\n", read_mode,
failrec->this_mirror, num_copies, failrec->in_validation);
- tree->ops->submit_bio_hook(inode, read_mode, bio, failrec->this_mirror,
- failrec->bio_flags, 0);
- return 0;
+ ret = tree->ops->submit_bio_hook(inode, read_mode, bio,
+ failrec->this_mirror,
+ failrec->bio_flags, 0);
+ return ret;
}
/* lots and lots of room for performance fixes in the end_bio funcs */
+int end_extent_writepage(struct page *page, int err, u64 start, u64 end)
+{
+ int uptodate = (err == 0);
+ struct extent_io_tree *tree;
+ int ret;
+
+ tree = &BTRFS_I(page->mapping->host)->io_tree;
+
+ if (tree->ops && tree->ops->writepage_end_io_hook) {
+ ret = tree->ops->writepage_end_io_hook(page, start,
+ end, NULL, uptodate);
+ if (ret)
+ uptodate = 0;
+ }
+
+ if (!uptodate && tree->ops &&
+ tree->ops->writepage_io_failed_hook) {
+ ret = tree->ops->writepage_io_failed_hook(NULL, page,
+ start, end, NULL);
+ /* Writeback already completed */
+ if (ret == 0)
+ return 1;
+ }
+
+ if (!uptodate) {
+ clear_extent_uptodate(tree, start, end, NULL, GFP_NOFS);
+ ClearPageUptodate(page);
+ SetPageError(page);
+ }
+ return 0;
+}
+
/*
* after a writepage IO is done, we need to:
* clear the uptodate bits on error
*/
static void end_bio_extent_writepage(struct bio *bio, int err)
{
- int uptodate = err == 0;
struct bio_vec *bvec = bio->bi_io_vec + bio->bi_vcnt - 1;
struct extent_io_tree *tree;
u64 start;
u64 end;
int whole_page;
- int ret;
do {
struct page *page = bvec->bv_page;
if (--bvec >= bio->bi_io_vec)
prefetchw(&bvec->bv_page->flags);
- if (tree->ops && tree->ops->writepage_end_io_hook) {
- ret = tree->ops->writepage_end_io_hook(page, start,
- end, NULL, uptodate);
- if (ret)
- uptodate = 0;
- }
-
- if (!uptodate && tree->ops &&
- tree->ops->writepage_io_failed_hook) {
- ret = tree->ops->writepage_io_failed_hook(bio, page,
- start, end, NULL);
- if (ret == 0) {
- uptodate = (err == 0);
- continue;
- }
- }
- if (!uptodate) {
- clear_extent_uptodate(tree, start, end, NULL, GFP_NOFS);
- ClearPageUptodate(page);
- SetPageError(page);
- }
+ if (end_extent_writepage(page, err, start, end))
+ continue;
if (whole_page)
end_page_writeback(page);
delalloc_start = delalloc_end + 1;
continue;
}
- tree->ops->fill_delalloc(inode, page, delalloc_start,
- delalloc_end, &page_started,
- &nr_written);
+ ret = tree->ops->fill_delalloc(inode, page,
+ delalloc_start,
+ delalloc_end,
+ &page_started,
+ &nr_written);
+ BUG_ON(ret);
/*
* delalloc_end is already one less than the total
* length, so we don't subtract one from
if (tree->ops && tree->ops->writepage_start_hook) {
ret = tree->ops->writepage_start_hook(page, start,
page_end);
- if (ret == -EAGAIN) {
- redirty_page_for_writepage(wbc, page);
+ if (ret) {
+ /* Fixup worker will requeue */
+ if (ret == -EBUSY)
+ wbc->pages_skipped++;
+ else
+ redirty_page_for_writepage(wbc, page);
update_nr_written(page, wbc, nr_written);
unlock_page(page);
ret = 0;
len = end - start + 1;
write_lock(&map->lock);
em = lookup_extent_mapping(map, start, len);
- if (IS_ERR_OR_NULL(em)) {
+ if (!em) {
write_unlock(&map->lock);
break;
}
num_pages = num_extent_pages(eb->start, eb->len);
clear_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags);
- if (eb_straddles_pages(eb)) {
- clear_extent_uptodate(tree, eb->start, eb->start + eb->len - 1,
- cached_state, GFP_NOFS);
- }
+ clear_extent_uptodate(tree, eb->start, eb->start + eb->len - 1,
+ cached_state, GFP_NOFS);
+
for (i = 0; i < num_pages; i++) {
page = extent_buffer_page(eb, i);
if (page)
int repair_io_failure(struct btrfs_mapping_tree *map_tree, u64 start,
u64 length, u64 logical, struct page *page,
int mirror_num);
+int end_extent_writepage(struct page *page, int err, u64 start, u64 end);
#endif
unsigned long flags;
struct block_device *bdev;
atomic_t refs;
- unsigned int in_tree:1;
- unsigned int compress_type:4;
+ unsigned int in_tree;
+ unsigned int compress_type;
};
struct extent_map_tree {
if (mode & ~FALLOC_FL_KEEP_SIZE)
return -EOPNOTSUPP;
+ /*
+ * Make sure we have enough space before we do the
+ * allocation.
+ */
+ ret = btrfs_check_data_free_space(inode, len);
+ if (ret)
+ return ret;
+
/*
* wait for ordered IO before we have any locks. We'll loop again
* below with the locks held.
if (em->block_start == EXTENT_MAP_HOLE ||
(cur_offset >= inode->i_size &&
!test_bit(EXTENT_FLAG_PREALLOC, &em->flags))) {
-
- /*
- * Make sure we have enough space before we do the
- * allocation.
- */
- ret = btrfs_check_data_free_space(inode, last_byte -
- cur_offset);
- if (ret) {
- free_extent_map(em);
- break;
- }
-
ret = btrfs_prealloc_file_range(inode, mode, cur_offset,
last_byte - cur_offset,
1 << inode->i_blkbits,
offset + len,
&alloc_hint);
- /* Let go of our reservation. */
- btrfs_free_reserved_data_space(inode, last_byte -
- cur_offset);
if (ret < 0) {
free_extent_map(em);
break;
&cached_state, GFP_NOFS);
out:
mutex_unlock(&inode->i_mutex);
+ /* Let go of our reservation. */
+ btrfs_free_reserved_data_space(inode, len);
return ret;
}
start - root->sectorsize,
root->sectorsize, 0);
if (IS_ERR(em)) {
- ret = -ENXIO;
+ ret = PTR_ERR(em);
goto out;
}
last_end = em->start + em->len;
while (1) {
em = btrfs_get_extent_fiemap(inode, NULL, 0, start, len, 0);
if (IS_ERR(em)) {
- ret = -ENXIO;
+ ret = PTR_ERR(em);
break;
}
spin_lock(&block_group->lock);
if (block_group->disk_cache_state != BTRFS_DC_WRITTEN) {
spin_unlock(&block_group->lock);
+ btrfs_free_path(path);
goto out;
}
spin_unlock(&block_group->lock);
trans->bytes_reserved);
if (ret)
goto out;
- trace_btrfs_space_reservation(root->fs_info, "ino_cache", (u64)trans,
+ trace_btrfs_space_reservation(root->fs_info, "ino_cache",
+ (u64)(unsigned long)trans,
trans->bytes_reserved, 1);
again:
inode = lookup_free_ino_inode(root, path);
out_put:
iput(inode);
out_release:
- trace_btrfs_space_reservation(root->fs_info, "ino_cache", (u64)trans,
+ trace_btrfs_space_reservation(root->fs_info, "ino_cache",
+ (u64)(unsigned long)trans,
trans->bytes_reserved, 0);
btrfs_block_rsv_release(root, trans->block_rsv, trans->bytes_reserved);
out:
struct inode *inode;
u64 page_start;
u64 page_end;
+ int ret;
fixup = container_of(work, struct btrfs_writepage_fixup, work);
page = fixup->page;
page_end, &cached_state, GFP_NOFS);
unlock_page(page);
btrfs_start_ordered_extent(inode, ordered, 1);
+ btrfs_put_ordered_extent(ordered);
goto again;
}
- BUG();
+ ret = btrfs_delalloc_reserve_space(inode, PAGE_CACHE_SIZE);
+ if (ret) {
+ mapping_set_error(page->mapping, ret);
+ end_extent_writepage(page, ret, page_start, page_end);
+ ClearPageChecked(page);
+ goto out;
+ }
+
btrfs_set_extent_delalloc(inode, page_start, page_end, &cached_state);
ClearPageChecked(page);
+ set_page_dirty(page);
out:
unlock_extent_cached(&BTRFS_I(inode)->io_tree, page_start, page_end,
&cached_state, GFP_NOFS);
fixup->work.func = btrfs_writepage_fixup_worker;
fixup->page = page;
btrfs_queue_worker(&root->fs_info->fixup_workers, &fixup->work);
- return -EAGAIN;
+ return -EBUSY;
}
static int insert_reserved_file_extent(struct btrfs_trans_handle *trans,
ret = btrfs_insert_dir_item(trans, root, name, name_len,
parent_inode, &key,
btrfs_inode_type(inode), index);
- BUG_ON(ret);
+ if (ret)
+ goto fail_dir_item;
btrfs_i_size_write(parent_inode, parent_inode->i_size +
name_len * 2);
ret = btrfs_update_inode(trans, root, parent_inode);
}
return ret;
+
+fail_dir_item:
+ if (unlikely(ino == BTRFS_FIRST_FREE_OBJECTID)) {
+ u64 local_index;
+ int err;
+ err = btrfs_del_root_ref(trans, root->fs_info->tree_root,
+ key.objectid, root->root_key.objectid,
+ parent_ino, &local_index, name, name_len);
+
+ } else if (add_backref) {
+ u64 local_index;
+ int err;
+
+ err = btrfs_del_inode_ref(trans, root, name, name_len,
+ ino, parent_ino, &local_index);
+ }
+ return ret;
}
static int btrfs_add_nondir(struct btrfs_trans_handle *trans,
int err;
u64 index = 0;
- inode = btrfs_new_inode(trans, new_root, NULL, "..", 2, new_dirid,
- new_dirid, S_IFDIR | 0700, &index);
+ inode = btrfs_new_inode(trans, new_root, NULL, "..", 2,
+ new_dirid, new_dirid,
+ S_IFDIR | (~current_umask() & S_IRWXUGO),
+ &index);
if (IS_ERR(inode))
return PTR_ERR(inode);
inode->i_op = &btrfs_dir_inode_operations;
int i_done;
struct btrfs_ordered_extent *ordered;
struct extent_state *cached_state = NULL;
+ struct extent_io_tree *tree;
gfp_t mask = btrfs_alloc_write_mask(inode->i_mapping);
if (isize == 0)
num_pages << PAGE_CACHE_SHIFT);
if (ret)
return ret;
-again:
- ret = 0;
i_done = 0;
+ tree = &BTRFS_I(inode)->io_tree;
/* step one, lock all the pages */
for (i = 0; i < num_pages; i++) {
struct page *page;
+again:
page = find_or_create_page(inode->i_mapping,
- start_index + i, mask);
+ start_index + i, mask);
if (!page)
break;
+ page_start = page_offset(page);
+ page_end = page_start + PAGE_CACHE_SIZE - 1;
+ while (1) {
+ lock_extent(tree, page_start, page_end, GFP_NOFS);
+ ordered = btrfs_lookup_ordered_extent(inode,
+ page_start);
+ unlock_extent(tree, page_start, page_end, GFP_NOFS);
+ if (!ordered)
+ break;
+
+ unlock_page(page);
+ btrfs_start_ordered_extent(inode, ordered, 1);
+ btrfs_put_ordered_extent(ordered);
+ lock_page(page);
+ }
+
if (!PageUptodate(page)) {
btrfs_readpage(NULL, page);
lock_page(page);
break;
}
}
+
isize = i_size_read(inode);
file_end = (isize - 1) >> PAGE_CACHE_SHIFT;
- if (!isize || page->index > file_end ||
- page->mapping != inode->i_mapping) {
+ if (!isize || page->index > file_end) {
/* whoops, we blew past eof, skip this page */
unlock_page(page);
page_cache_release(page);
break;
}
+
+ if (page->mapping != inode->i_mapping) {
+ unlock_page(page);
+ page_cache_release(page);
+ goto again;
+ }
+
pages[i] = page;
i_done++;
}
lock_extent_bits(&BTRFS_I(inode)->io_tree,
page_start, page_end - 1, 0, &cached_state,
GFP_NOFS);
- ordered = btrfs_lookup_first_ordered_extent(inode, page_end - 1);
- if (ordered &&
- ordered->file_offset + ordered->len > page_start &&
- ordered->file_offset < page_end) {
- btrfs_put_ordered_extent(ordered);
- unlock_extent_cached(&BTRFS_I(inode)->io_tree,
- page_start, page_end - 1,
- &cached_state, GFP_NOFS);
- for (i = 0; i < i_done; i++) {
- unlock_page(pages[i]);
- page_cache_release(pages[i]);
- }
- btrfs_wait_ordered_range(inode, page_start,
- page_end - page_start);
- goto again;
- }
- if (ordered)
- btrfs_put_ordered_extent(ordered);
-
clear_extent_bit(&BTRFS_I(inode)->io_tree, page_start,
page_end - 1, EXTENT_DIRTY | EXTENT_DELALLOC |
EXTENT_DO_ACCOUNTING, 0, 0, &cached_state,
goto out;
}
+ if (name[0] == '.' &&
+ (namelen == 1 || (name[1] == '.' && namelen == 2))) {
+ ret = -EEXIST;
+ goto out;
+ }
+
if (subvol) {
ret = btrfs_mksubvol(&file->f_path, name, namelen,
NULL, transid, readonly);
}
static noinline_for_stack int scrub_chunk(struct scrub_dev *sdev,
- u64 chunk_tree, u64 chunk_objectid, u64 chunk_offset, u64 length)
+ u64 chunk_tree, u64 chunk_objectid, u64 chunk_offset, u64 length,
+ u64 dev_offset)
{
struct btrfs_mapping_tree *map_tree =
&sdev->dev->dev_root->fs_info->mapping_tree;
goto out;
for (i = 0; i < map->num_stripes; ++i) {
- if (map->stripes[i].dev == sdev->dev) {
+ if (map->stripes[i].dev == sdev->dev &&
+ map->stripes[i].physical == dev_offset) {
ret = scrub_stripe(sdev, map, i, chunk_offset, length);
if (ret)
goto out;
break;
}
ret = scrub_chunk(sdev, chunk_tree, chunk_objectid,
- chunk_offset, length);
+ chunk_offset, length, found_key.offset);
btrfs_put_block_group(cache);
if (ret)
break;
if (num_bytes) {
trace_btrfs_space_reservation(root->fs_info, "transaction",
- (u64)h, num_bytes, 1);
+ (u64)(unsigned long)h,
+ num_bytes, 1);
h->block_rsv = &root->fs_info->trans_block_rsv;
h->bytes_reserved = num_bytes;
}
dentry->d_name.name, dentry->d_name.len,
parent_inode, &key,
BTRFS_FT_DIR, index);
- BUG_ON(ret);
+ if (ret) {
+ pending->error = -EEXIST;
+ dput(parent);
+ goto fail;
+ }
btrfs_i_size_write(parent_inode, parent_inode->i_size +
dentry->d_name.len * 2);
{
struct btrfs_pending_snapshot *pending;
struct list_head *head = &trans->transaction->pending_snapshots;
- int ret;
- list_for_each_entry(pending, head, list) {
- ret = create_pending_snapshot(trans, fs_info, pending);
- BUG_ON(ret);
- }
+ list_for_each_entry(pending, head, list)
+ create_pending_snapshot(trans, fs_info, pending);
return 0;
}
{
struct btrfs_device *device, *next;
+ struct block_device *latest_bdev = NULL;
+ u64 latest_devid = 0;
+ u64 latest_transid = 0;
+
mutex_lock(&uuid_mutex);
again:
/* This is the initialized path, it is safe to release the devices. */
list_for_each_entry_safe(device, next, &fs_devices->devices, dev_list) {
- if (device->in_fs_metadata)
+ if (device->in_fs_metadata) {
+ if (!latest_transid ||
+ device->generation > latest_transid) {
+ latest_devid = device->devid;
+ latest_transid = device->generation;
+ latest_bdev = device->bdev;
+ }
continue;
+ }
if (device->bdev) {
blkdev_put(device->bdev, device->mode);
goto again;
}
+ fs_devices->latest_bdev = latest_bdev;
+ fs_devices->latest_devid = latest_devid;
+ fs_devices->latest_trans = latest_transid;
+
mutex_unlock(&uuid_mutex);
return 0;
}
em = lookup_extent_mapping(em_tree, chunk_offset, 1);
read_unlock(&em_tree->lock);
- BUG_ON(em->start > chunk_offset ||
+ BUG_ON(!em || em->start > chunk_offset ||
em->start + em->len < chunk_offset);
map = (struct map_lookup *)em->bdev;
return -ENOMEM;
btrfs_set_buffer_uptodate(sb);
btrfs_set_buffer_lockdep_class(root->root_key.objectid, sb, 0);
+ /*
+ * The sb extent buffer is artifical and just used to read the system array.
+ * btrfs_set_buffer_uptodate() call does not properly mark all it's
+ * pages up-to-date when the page is larger: extent does not cover the
+ * whole page and consequently check_page_uptodate does not find all
+ * the page's extents up-to-date (the hole beyond sb),
+ * write_extent_buffer then triggers a WARN_ON.
+ *
+ * Regular short extents go through mark_extent_buffer_dirty/writeback cycle,
+ * but sb spans only this function. Add an explicit SetPageUptodate call
+ * to silence the warning eg. on PowerPC 64.
+ */
+ if (PAGE_CACHE_SIZE > BTRFS_SUPER_INFO_SIZE)
+ SetPageUptodate(sb->first_page);
write_extent_buffer(sb, super_copy, 0, BTRFS_SUPER_INFO_SIZE);
array_size = btrfs_super_sys_array_size(super_copy);
static int cp_compat_stat(struct kstat *stat, struct compat_stat __user *ubuf)
{
- compat_ino_t ino = stat->ino;
- typeof(ubuf->st_uid) uid = 0;
- typeof(ubuf->st_gid) gid = 0;
- int err;
+ struct compat_stat tmp;
- SET_UID(uid, stat->uid);
- SET_GID(gid, stat->gid);
+ if (!old_valid_dev(stat->dev) || !old_valid_dev(stat->rdev))
+ return -EOVERFLOW;
- if ((u64) stat->size > MAX_NON_LFS ||
- !old_valid_dev(stat->dev) ||
- !old_valid_dev(stat->rdev))
+ memset(&tmp, 0, sizeof(tmp));
+ tmp.st_dev = old_encode_dev(stat->dev);
+ tmp.st_ino = stat->ino;
+ if (sizeof(tmp.st_ino) < sizeof(stat->ino) && tmp.st_ino != stat->ino)
return -EOVERFLOW;
- if (sizeof(ino) < sizeof(stat->ino) && ino != stat->ino)
+ tmp.st_mode = stat->mode;
+ tmp.st_nlink = stat->nlink;
+ if (tmp.st_nlink != stat->nlink)
return -EOVERFLOW;
-
- if (clear_user(ubuf, sizeof(*ubuf)))
- return -EFAULT;
-
- err = __put_user(old_encode_dev(stat->dev), &ubuf->st_dev);
- err |= __put_user(ino, &ubuf->st_ino);
- err |= __put_user(stat->mode, &ubuf->st_mode);
- err |= __put_user(stat->nlink, &ubuf->st_nlink);
- err |= __put_user(uid, &ubuf->st_uid);
- err |= __put_user(gid, &ubuf->st_gid);
- err |= __put_user(old_encode_dev(stat->rdev), &ubuf->st_rdev);
- err |= __put_user(stat->size, &ubuf->st_size);
- err |= __put_user(stat->atime.tv_sec, &ubuf->st_atime);
- err |= __put_user(stat->atime.tv_nsec, &ubuf->st_atime_nsec);
- err |= __put_user(stat->mtime.tv_sec, &ubuf->st_mtime);
- err |= __put_user(stat->mtime.tv_nsec, &ubuf->st_mtime_nsec);
- err |= __put_user(stat->ctime.tv_sec, &ubuf->st_ctime);
- err |= __put_user(stat->ctime.tv_nsec, &ubuf->st_ctime_nsec);
- err |= __put_user(stat->blksize, &ubuf->st_blksize);
- err |= __put_user(stat->blocks, &ubuf->st_blocks);
- return err;
+ SET_UID(tmp.st_uid, stat->uid);
+ SET_GID(tmp.st_gid, stat->gid);
+ tmp.st_rdev = old_encode_dev(stat->rdev);
+ if ((u64) stat->size > MAX_NON_LFS)
+ return -EOVERFLOW;
+ tmp.st_size = stat->size;
+ tmp.st_atime = stat->atime.tv_sec;
+ tmp.st_atime_nsec = stat->atime.tv_nsec;
+ tmp.st_mtime = stat->mtime.tv_sec;
+ tmp.st_mtime_nsec = stat->mtime.tv_nsec;
+ tmp.st_ctime = stat->ctime.tv_sec;
+ tmp.st_ctime_nsec = stat->ctime.tv_nsec;
+ tmp.st_blocks = stat->blocks;
+ tmp.st_blksize = stat->blksize;
+ return copy_to_user(ubuf, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
asmlinkage long compat_sys_newstat(const char __user * filename,
static struct hlist_bl_head *dentry_hashtable __read_mostly;
-static inline struct hlist_bl_head *d_hash(struct dentry *parent,
+static inline struct hlist_bl_head *d_hash(const struct dentry *parent,
unsigned long hash)
{
hash += ((unsigned long) parent ^ GOLDEN_RATIO_PRIME) / L1_CACHE_BYTES;
* child is looked up. Thus, an interlocking stepping of sequence lock checks
* is formed, giving integrity down the path walk.
*/
-struct dentry *__d_lookup_rcu(struct dentry *parent, struct qstr *name,
- unsigned *seq, struct inode **inode)
+struct dentry *__d_lookup_rcu(const struct dentry *parent,
+ const struct qstr *name,
+ unsigned *seqp, struct inode **inode)
{
unsigned int len = name->len;
unsigned int hash = name->hash;
* See Documentation/filesystems/path-lookup.txt for more details.
*/
hlist_bl_for_each_entry_rcu(dentry, node, b, d_hash) {
+ unsigned seq;
struct inode *i;
const char *tname;
int tlen;
continue;
seqretry:
- *seq = read_seqcount_begin(&dentry->d_seq);
+ seq = read_seqcount_begin(&dentry->d_seq);
if (dentry->d_parent != parent)
continue;
if (d_unhashed(dentry))
* edge of memory when walking. If we could load this
* atomically some other way, we could drop this check.
*/
- if (read_seqcount_retry(&dentry->d_seq, *seq))
+ if (read_seqcount_retry(&dentry->d_seq, seq))
goto seqretry;
if (unlikely(parent->d_flags & DCACHE_OP_COMPARE)) {
if (parent->d_op->d_compare(parent, *inode,
* order to do anything useful with the returned dentry
* anyway.
*/
+ *seqp = seq;
*inode = i;
return dentry;
}
static void __init dcache_init_early(void)
{
- int loop;
+ unsigned int loop;
/* If hashes are distributed across NUMA nodes, defer
* hash allocation until vmalloc space is available.
&d_hash_mask,
0);
- for (loop = 0; loop < (1 << d_hash_shift); loop++)
+ for (loop = 0; loop < (1U << d_hash_shift); loop++)
INIT_HLIST_BL_HEAD(dentry_hashtable + loop);
}
static void __init dcache_init(void)
{
- int loop;
+ unsigned int loop;
/*
* A constructor could be added for stable state like the lists,
&d_hash_mask,
0);
- for (loop = 0; loop < (1 << d_hash_shift); loop++)
+ for (loop = 0; loop < (1U << d_hash_shift); loop++)
INIT_HLIST_BL_HEAD(dentry_hashtable + loop);
}
if (atomic_read(&inode->i_dio_count))
__inode_dio_wait(inode);
}
-EXPORT_SYMBOL_GPL(inode_dio_wait);
+EXPORT_SYMBOL(inode_dio_wait);
/*
* inode_dio_done - signal finish of a direct I/O requests
if (atomic_dec_and_test(&inode->i_dio_count))
wake_up_bit(&inode->i_state, __I_DIO_WAKEUP);
}
-EXPORT_SYMBOL_GPL(inode_dio_done);
+EXPORT_SYMBOL(inode_dio_done);
/*
* How many pages are in the queue?
return;
}
+static size_t ecryptfs_max_decoded_size(size_t encoded_size)
+{
+ /* Not exact; conservatively long. Every block of 4
+ * encoded characters decodes into a block of 3
+ * decoded characters. This segment of code provides
+ * the caller with the maximum amount of allocated
+ * space that @dst will need to point to in a
+ * subsequent call. */
+ return ((encoded_size + 1) * 3) / 4;
+}
+
/**
* ecryptfs_decode_from_filename
* @dst: If NULL, this function only sets @dst_size and returns. If
size_t dst_byte_offset = 0;
if (dst == NULL) {
- /* Not exact; conservatively long. Every block of 4
- * encoded characters decodes into a block of 3
- * decoded characters. This segment of code provides
- * the caller with the maximum amount of allocated
- * space that @dst will need to point to in a
- * subsequent call. */
- (*dst_size) = (((src_size + 1) * 3) / 4);
+ (*dst_size) = ecryptfs_max_decoded_size(src_size);
goto out;
}
while (src_byte_offset < src_size) {
out:
return rc;
}
+
+#define ENC_NAME_MAX_BLOCKLEN_8_OR_16 143
+
+int ecryptfs_set_f_namelen(long *namelen, long lower_namelen,
+ struct ecryptfs_mount_crypt_stat *mount_crypt_stat)
+{
+ struct blkcipher_desc desc;
+ struct mutex *tfm_mutex;
+ size_t cipher_blocksize;
+ int rc;
+
+ if (!(mount_crypt_stat->flags & ECRYPTFS_GLOBAL_ENCRYPT_FILENAMES)) {
+ (*namelen) = lower_namelen;
+ return 0;
+ }
+
+ rc = ecryptfs_get_tfm_and_mutex_for_cipher_name(&desc.tfm, &tfm_mutex,
+ mount_crypt_stat->global_default_fn_cipher_name);
+ if (unlikely(rc)) {
+ (*namelen) = 0;
+ return rc;
+ }
+
+ mutex_lock(tfm_mutex);
+ cipher_blocksize = crypto_blkcipher_blocksize(desc.tfm);
+ mutex_unlock(tfm_mutex);
+
+ /* Return an exact amount for the common cases */
+ if (lower_namelen == NAME_MAX
+ && (cipher_blocksize == 8 || cipher_blocksize == 16)) {
+ (*namelen) = ENC_NAME_MAX_BLOCKLEN_8_OR_16;
+ return 0;
+ }
+
+ /* Return a safe estimate for the uncommon cases */
+ (*namelen) = lower_namelen;
+ (*namelen) -= ECRYPTFS_FNEK_ENCRYPTED_FILENAME_PREFIX_SIZE;
+ /* Since this is the max decoded size, subtract 1 "decoded block" len */
+ (*namelen) = ecryptfs_max_decoded_size(*namelen) - 3;
+ (*namelen) -= ECRYPTFS_TAG_70_MAX_METADATA_SIZE;
+ (*namelen) -= ECRYPTFS_FILENAME_MIN_RANDOM_PREPEND_BYTES;
+ /* Worst case is that the filename is padded nearly a full block size */
+ (*namelen) -= cipher_blocksize - 1;
+
+ if ((*namelen) < 0)
+ (*namelen) = 0;
+
+ return 0;
+}
#define ECRYPTFS_NON_NULL 0x42 /* A reasonable substitute for NULL */
#define MD5_DIGEST_SIZE 16
#define ECRYPTFS_TAG_70_DIGEST_SIZE MD5_DIGEST_SIZE
+#define ECRYPTFS_TAG_70_MIN_METADATA_SIZE (1 + ECRYPTFS_MIN_PKT_LEN_SIZE \
+ + ECRYPTFS_SIG_SIZE + 1 + 1)
+#define ECRYPTFS_TAG_70_MAX_METADATA_SIZE (1 + ECRYPTFS_MAX_PKT_LEN_SIZE \
+ + ECRYPTFS_SIG_SIZE + 1 + 1)
#define ECRYPTFS_FEK_ENCRYPTED_FILENAME_PREFIX "ECRYPTFS_FEK_ENCRYPTED."
#define ECRYPTFS_FEK_ENCRYPTED_FILENAME_PREFIX_SIZE 23
#define ECRYPTFS_FNEK_ENCRYPTED_FILENAME_PREFIX "ECRYPTFS_FNEK_ENCRYPTED."
size_t *packet_size,
struct ecryptfs_mount_crypt_stat *mount_crypt_stat,
char *data, size_t max_packet_size);
+int ecryptfs_set_f_namelen(long *namelen, long lower_namelen,
+ struct ecryptfs_mount_crypt_stat *mount_crypt_stat);
int ecryptfs_derive_iv(char *iv, struct ecryptfs_crypt_stat *crypt_stat,
loff_t offset);
}
rc = vfs_setxattr(lower_dentry, name, value, size, flags);
+ if (!rc)
+ fsstack_copy_attr_all(dentry->d_inode, lower_dentry->d_inode);
out:
return rc;
}
* Octets N3-N4: Block-aligned encrypted filename
* - Consists of a minimum number of random characters, a \0
* separator, and then the filename */
- s->max_packet_size = (1 /* Tag 70 identifier */
- + 3 /* Max Tag 70 packet size */
- + ECRYPTFS_SIG_SIZE /* FNEK sig */
- + 1 /* Cipher identifier */
+ s->max_packet_size = (ECRYPTFS_TAG_70_MAX_METADATA_SIZE
+ s->block_aligned_filename_size);
if (dest == NULL) {
(*packet_size) = s->max_packet_size;
goto out;
}
s->desc.flags = CRYPTO_TFM_REQ_MAY_SLEEP;
- if (max_packet_size < (1 + 1 + ECRYPTFS_SIG_SIZE + 1 + 1)) {
+ if (max_packet_size < ECRYPTFS_TAG_70_MIN_METADATA_SIZE) {
printk(KERN_WARNING "%s: max_packet_size is [%zd]; it must be "
"at least [%d]\n", __func__, max_packet_size,
- (1 + 1 + ECRYPTFS_SIG_SIZE + 1 + 1));
+ ECRYPTFS_TAG_70_MIN_METADATA_SIZE);
rc = -EINVAL;
goto out;
}
goto memdup;
} else if (count < MIN_MSG_PKT_SIZE || count > MAX_MSG_PKT_SIZE) {
printk(KERN_WARNING "%s: Acceptable packet size range is "
- "[%d-%lu], but amount of data written is [%zu].",
+ "[%d-%zu], but amount of data written is [%zu].",
__func__, MIN_MSG_PKT_SIZE, MAX_MSG_PKT_SIZE, count);
return -EINVAL;
}
/* This is a header extent */
char *page_virt;
- page_virt = kmap_atomic(page, KM_USER0);
+ page_virt = kmap_atomic(page);
memset(page_virt, 0, PAGE_CACHE_SIZE);
/* TODO: Support more than one header extent */
if (view_extent_num == 0) {
crypt_stat,
&written);
}
- kunmap_atomic(page_virt, KM_USER0);
+ kunmap_atomic(page_virt);
flush_dcache_page(page);
if (rc) {
printk(KERN_ERR "%s: Error reading xattr "
ecryptfs_page_idx, rc);
goto out;
}
- ecryptfs_page_virt = kmap_atomic(ecryptfs_page, KM_USER0);
+ ecryptfs_page_virt = kmap_atomic(ecryptfs_page);
/*
* pos: where we're now writing, offset: where the request was
(data + data_offset), num_bytes);
data_offset += num_bytes;
}
- kunmap_atomic(ecryptfs_page_virt, KM_USER0);
+ kunmap_atomic(ecryptfs_page_virt);
flush_dcache_page(ecryptfs_page);
SetPageUptodate(ecryptfs_page);
unlock_page(ecryptfs_page);
#include <linux/seq_file.h>
#include <linux/file.h>
#include <linux/crypto.h>
+#include <linux/statfs.h>
+#include <linux/magic.h>
#include "ecryptfs_kernel.h"
struct kmem_cache *ecryptfs_inode_info_cache;
static int ecryptfs_statfs(struct dentry *dentry, struct kstatfs *buf)
{
struct dentry *lower_dentry = ecryptfs_dentry_to_lower(dentry);
+ int rc;
if (!lower_dentry->d_sb->s_op->statfs)
return -ENOSYS;
- return lower_dentry->d_sb->s_op->statfs(lower_dentry, buf);
+
+ rc = lower_dentry->d_sb->s_op->statfs(lower_dentry, buf);
+ if (rc)
+ return rc;
+
+ buf->f_type = ECRYPTFS_SUPER_MAGIC;
+ rc = ecryptfs_set_f_namelen(&buf->f_namelen, buf->f_namelen,
+ &ecryptfs_superblock_to_private(dentry->d_sb)->mount_crypt_stat);
+
+ return rc;
}
/**
return !list_empty(p);
}
+static inline struct eppoll_entry *ep_pwq_from_wait(wait_queue_t *p)
+{
+ return container_of(p, struct eppoll_entry, wait);
+}
+
/* Get the "struct epitem" from a wait queue pointer */
static inline struct epitem *ep_item_from_wait(wait_queue_t *p)
{
put_cpu();
}
+static void ep_remove_wait_queue(struct eppoll_entry *pwq)
+{
+ wait_queue_head_t *whead;
+
+ rcu_read_lock();
+ /* If it is cleared by POLLFREE, it should be rcu-safe */
+ whead = rcu_dereference(pwq->whead);
+ if (whead)
+ remove_wait_queue(whead, &pwq->wait);
+ rcu_read_unlock();
+}
+
/*
* This function unregisters poll callbacks from the associated file
* descriptor. Must be called with "mtx" held (or "epmutex" if called from
pwq = list_first_entry(lsthead, struct eppoll_entry, llink);
list_del(&pwq->llink);
- remove_wait_queue(pwq->whead, &pwq->wait);
+ ep_remove_wait_queue(pwq);
kmem_cache_free(pwq_cache, pwq);
}
}
struct epitem *epi = ep_item_from_wait(wait);
struct eventpoll *ep = epi->ep;
+ if ((unsigned long)key & POLLFREE) {
+ ep_pwq_from_wait(wait)->whead = NULL;
+ /*
+ * whead = NULL above can race with ep_remove_wait_queue()
+ * which can do another remove_wait_queue() after us, so we
+ * can't use __remove_wait_queue(). whead->lock is held by
+ * the caller.
+ */
+ list_del_init(&wait->task_list);
+ }
+
spin_lock_irqsave(&ep->lock, flags);
/*
spin_unlock(&lru_lock);
}
-static void gfs2_glock_remove_from_lru(struct gfs2_glock *gl)
+static void __gfs2_glock_remove_from_lru(struct gfs2_glock *gl)
{
- spin_lock(&lru_lock);
if (!list_empty(&gl->gl_lru)) {
list_del_init(&gl->gl_lru);
atomic_dec(&lru_count);
clear_bit(GLF_LRU, &gl->gl_flags);
}
+}
+
+static void gfs2_glock_remove_from_lru(struct gfs2_glock *gl)
+{
+ spin_lock(&lru_lock);
+ __gfs2_glock_remove_from_lru(gl);
spin_unlock(&lru_lock);
}
struct gfs2_sbd *sdp = gl->gl_sbd;
struct address_space *mapping = gfs2_glock2aspace(gl);
- if (atomic_dec_and_test(&gl->gl_ref)) {
+ if (atomic_dec_and_lock(&gl->gl_ref, &lru_lock)) {
+ __gfs2_glock_remove_from_lru(gl);
+ spin_unlock(&lru_lock);
spin_lock_bucket(gl->gl_hash);
hlist_bl_del_rcu(&gl->gl_list);
spin_unlock_bucket(gl->gl_hash);
- gfs2_glock_remove_from_lru(gl);
GLOCK_BUG_ON(gl, !list_empty(&gl->gl_holders));
GLOCK_BUG_ON(gl, mapping && mapping->nrpages);
trace_gfs2_glock_put(gl);
int error;
int dblocks = 1;
- error = gfs2_rindex_update(sdp);
- if (error)
- fs_warn(sdp, "rindex update returns %d\n", error);
-
error = gfs2_inplace_reserve(dip, RES_DINODE);
if (error)
goto out;
rgd = gfs2_blk2rgrpd(sdp, ip->i_no_addr);
if (!rgd)
goto out_inodes;
+
gfs2_holder_init(rgd->rd_gl, LM_ST_EXCLUSIVE, 0, ghs + 2);
fs_err(sdp, "can't get quota file inode: %d\n", error);
goto fail_rindex;
}
+
+ error = gfs2_rindex_update(sdp);
+ if (error)
+ goto fail_qinode;
+
return 0;
fail_qinode:
struct gfs2_glock *gl = ip->i_gl;
struct gfs2_holder ri_gh;
int error = 0;
+ int unlock_required = 0;
/* Read new copy from disk if we don't have the latest */
if (!sdp->sd_rindex_uptodate) {
mutex_lock(&sdp->sd_rindex_mutex);
- error = gfs2_glock_nq_init(gl, LM_ST_SHARED, 0, &ri_gh);
- if (error)
- return error;
+ if (!gfs2_glock_is_locked_by_me(gl)) {
+ error = gfs2_glock_nq_init(gl, LM_ST_SHARED, 0, &ri_gh);
+ if (error)
+ return error;
+ unlock_required = 1;
+ }
if (!sdp->sd_rindex_uptodate)
error = gfs2_ri_update(ip);
- gfs2_glock_dq_uninit(&ri_gh);
+ if (unlock_required)
+ gfs2_glock_dq_uninit(&ri_gh);
mutex_unlock(&sdp->sd_rindex_mutex);
}
*/
void __init inode_init_early(void)
{
- int loop;
+ unsigned int loop;
/* If hashes are distributed across NUMA nodes, defer
* hash allocation until vmalloc space is available.
&i_hash_mask,
0);
- for (loop = 0; loop < (1 << i_hash_shift); loop++)
+ for (loop = 0; loop < (1U << i_hash_shift); loop++)
INIT_HLIST_HEAD(&inode_hashtable[loop]);
}
void __init inode_init(void)
{
- int loop;
+ unsigned int loop;
/* inode slab cache */
inode_cachep = kmem_cache_create("inode_cache",
&i_hash_mask,
0);
- for (loop = 0; loop < (1 << i_hash_shift); loop++)
+ for (loop = 0; loop < (1U << i_hash_shift); loop++)
INIT_HLIST_HEAD(&inode_hashtable[loop]);
}
struct dentry *old;
/* Don't create child dentry for a dead directory. */
- if (unlikely(IS_DEADDIR(inode)))
+ if (unlikely(IS_DEADDIR(inode))) {
+ dput(dentry);
return ERR_PTR(-ENOENT);
+ }
old = inode->i_op->lookup(inode, dentry, nd);
if (unlikely(old)) {
return 1;
}
+unsigned int full_name_hash(const unsigned char *name, unsigned int len)
+{
+ unsigned long hash = init_name_hash();
+ while (len--)
+ hash = partial_name_hash(*name++, hash);
+ return end_name_hash(hash);
+}
+EXPORT_SYMBOL(full_name_hash);
+
+/*
+ * We know there's a real path component here of at least
+ * one character.
+ */
+static inline unsigned long hash_name(const char *name, unsigned int *hashp)
+{
+ unsigned long hash = init_name_hash();
+ unsigned long len = 0, c;
+
+ c = (unsigned char)*name;
+ do {
+ len++;
+ hash = partial_name_hash(c, hash);
+ c = (unsigned char)name[len];
+ } while (c && c != '/');
+ *hashp = end_name_hash(hash);
+ return len;
+}
+
/*
* Name resolution.
* This is the basic name resolution function, turning a pathname into
/* At this point we know we have a real path component. */
for(;;) {
- unsigned long hash;
struct qstr this;
- unsigned int c;
+ long len;
int type;
err = may_lookup(nd);
if (err)
break;
+ len = hash_name(name, &this.hash);
this.name = name;
- c = *(const unsigned char *)name;
-
- hash = init_name_hash();
- do {
- name++;
- hash = partial_name_hash(c, hash);
- c = *(const unsigned char *)name;
- } while (c && (c != '/'));
- this.len = name - (const char *) this.name;
- this.hash = end_name_hash(hash);
+ this.len = len;
type = LAST_NORM;
- if (this.name[0] == '.') switch (this.len) {
+ if (name[0] == '.') switch (len) {
case 2:
- if (this.name[1] == '.') {
+ if (name[1] == '.') {
type = LAST_DOTDOT;
nd->flags |= LOOKUP_JUMPED;
}
}
}
- /* remove trailing slashes? */
- if (!c)
+ if (!name[len])
goto last_component;
- while (*++name == '/');
- if (!*name)
+ /*
+ * If it wasn't NUL, we know it was '/'. Skip that
+ * slash, and continue until no more slashes.
+ */
+ do {
+ len++;
+ } while (unlikely(name[len] == '/'));
+ if (!name[len])
goto last_component;
+ name += len;
err = walk_component(nd, &next, &this, type, LOOKUP_FOLLOW);
if (err < 0)
struct dentry *lookup_one_len(const char *name, struct dentry *base, int len)
{
struct qstr this;
- unsigned long hash;
unsigned int c;
WARN_ON_ONCE(!mutex_is_locked(&base->d_inode->i_mutex));
this.name = name;
this.len = len;
+ this.hash = full_name_hash(name, len);
if (!len)
return ERR_PTR(-EACCES);
- hash = init_name_hash();
while (len--) {
c = *(const unsigned char *)name++;
if (c == '/' || c == '\0')
return ERR_PTR(-EACCES);
- hash = partial_name_hash(c, hash);
}
- this.hash = end_name_hash(hash);
/*
* See if the low-level filesystem might want
* to use its own hash..
}
if (npages > 1) {
/* for decoding across pages */
- args.acl_scratch = alloc_page(GFP_KERNEL);
- if (!args.acl_scratch)
+ res.acl_scratch = alloc_page(GFP_KERNEL);
+ if (!res.acl_scratch)
goto out_free;
}
args.acl_len = npages * PAGE_SIZE;
for (i = 0; i < npages; i++)
if (pages[i])
__free_page(pages[i]);
- if (args.acl_scratch)
- __free_page(args.acl_scratch);
+ if (res.acl_scratch)
+ __free_page(res.acl_scratch);
return ret;
}
clp->cl_rpcclient->cl_auth->au_flavor);
res.server_scope = kzalloc(sizeof(struct server_scope), GFP_KERNEL);
- if (unlikely(!res.server_scope))
- return -ENOMEM;
+ if (unlikely(!res.server_scope)) {
+ status = -ENOMEM;
+ goto out;
+ }
status = rpc_call_sync(clp->cl_rpcclient, &msg, RPC_TASK_TIMEOUT);
if (!status)
clp->server_scope = NULL;
}
- if (!clp->server_scope)
+ if (!clp->server_scope) {
clp->server_scope = res.server_scope;
- else
- kfree(res.server_scope);
+ goto out;
+ }
}
-
+ kfree(res.server_scope);
+out:
dprintk("<-- %s status= %d\n", __func__, status);
return status;
}
return status;
}
+static struct nfs4_slot *nfs4_alloc_slots(u32 max_slots, gfp_t gfp_flags)
+{
+ return kcalloc(max_slots, sizeof(struct nfs4_slot), gfp_flags);
+}
+
+static void nfs4_add_and_init_slots(struct nfs4_slot_table *tbl,
+ struct nfs4_slot *new,
+ u32 max_slots,
+ u32 ivalue)
+{
+ struct nfs4_slot *old = NULL;
+ u32 i;
+
+ spin_lock(&tbl->slot_tbl_lock);
+ if (new) {
+ old = tbl->slots;
+ tbl->slots = new;
+ tbl->max_slots = max_slots;
+ }
+ tbl->highest_used_slotid = -1; /* no slot is currently used */
+ for (i = 0; i < tbl->max_slots; i++)
+ tbl->slots[i].seq_nr = ivalue;
+ spin_unlock(&tbl->slot_tbl_lock);
+ kfree(old);
+}
+
/*
- * Reset a slot table
+ * (re)Initialise a slot table
*/
-static int nfs4_reset_slot_table(struct nfs4_slot_table *tbl, u32 max_reqs,
- int ivalue)
+static int nfs4_realloc_slot_table(struct nfs4_slot_table *tbl, u32 max_reqs,
+ u32 ivalue)
{
struct nfs4_slot *new = NULL;
- int i;
- int ret = 0;
+ int ret = -ENOMEM;
dprintk("--> %s: max_reqs=%u, tbl->max_slots %d\n", __func__,
max_reqs, tbl->max_slots);
/* Does the newly negotiated max_reqs match the existing slot table? */
if (max_reqs != tbl->max_slots) {
- ret = -ENOMEM;
- new = kmalloc(max_reqs * sizeof(struct nfs4_slot),
- GFP_NOFS);
+ new = nfs4_alloc_slots(max_reqs, GFP_NOFS);
if (!new)
goto out;
- ret = 0;
- kfree(tbl->slots);
}
- spin_lock(&tbl->slot_tbl_lock);
- if (new) {
- tbl->slots = new;
- tbl->max_slots = max_reqs;
- }
- for (i = 0; i < tbl->max_slots; ++i)
- tbl->slots[i].seq_nr = ivalue;
- spin_unlock(&tbl->slot_tbl_lock);
+ ret = 0;
+
+ nfs4_add_and_init_slots(tbl, new, max_reqs, ivalue);
dprintk("%s: tbl=%p slots=%p max_slots=%d\n", __func__,
tbl, tbl->slots, tbl->max_slots);
out:
return;
}
-/*
- * Initialize slot table
- */
-static int nfs4_init_slot_table(struct nfs4_slot_table *tbl,
- int max_slots, int ivalue)
-{
- struct nfs4_slot *slot;
- int ret = -ENOMEM;
-
- BUG_ON(max_slots > NFS4_MAX_SLOT_TABLE);
-
- dprintk("--> %s: max_reqs=%u\n", __func__, max_slots);
-
- slot = kcalloc(max_slots, sizeof(struct nfs4_slot), GFP_NOFS);
- if (!slot)
- goto out;
- ret = 0;
-
- spin_lock(&tbl->slot_tbl_lock);
- tbl->max_slots = max_slots;
- tbl->slots = slot;
- tbl->highest_used_slotid = -1; /* no slot is currently used */
- spin_unlock(&tbl->slot_tbl_lock);
- dprintk("%s: tbl=%p slots=%p max_slots=%d\n", __func__,
- tbl, tbl->slots, tbl->max_slots);
-out:
- dprintk("<-- %s: return %d\n", __func__, ret);
- return ret;
-}
-
/*
* Initialize or reset the forechannel and backchannel tables
*/
dprintk("--> %s\n", __func__);
/* Fore channel */
tbl = &ses->fc_slot_table;
- if (tbl->slots == NULL) {
- status = nfs4_init_slot_table(tbl, ses->fc_attrs.max_reqs, 1);
- if (status) /* -ENOMEM */
- return status;
- } else {
- status = nfs4_reset_slot_table(tbl, ses->fc_attrs.max_reqs, 1);
- if (status)
- return status;
- }
+ status = nfs4_realloc_slot_table(tbl, ses->fc_attrs.max_reqs, 1);
+ if (status) /* -ENOMEM */
+ return status;
/* Back channel */
tbl = &ses->bc_slot_table;
- if (tbl->slots == NULL) {
- status = nfs4_init_slot_table(tbl, ses->bc_attrs.max_reqs, 0);
- if (status)
- /* Fore and back channel share a connection so get
- * both slot tables or neither */
- nfs4_destroy_slot_tables(ses);
- } else
- status = nfs4_reset_slot_table(tbl, ses->bc_attrs.max_reqs, 0);
+ status = nfs4_realloc_slot_table(tbl, ses->bc_attrs.max_reqs, 0);
+ if (status && tbl->slots == NULL)
+ /* Fore and back channel share a connection so get
+ * both slot tables or neither */
+ nfs4_destroy_slot_tables(ses);
return status;
}
{
struct nfs_client *clp = server->nfs_client;
+ if (test_and_clear_bit(NFS_DELEGATED_STATE, &state->flags))
+ nfs_async_inode_return_delegation(state->inode, &state->stateid);
nfs4_state_mark_reclaim_nograce(clp, state);
nfs4_schedule_state_manager(clp);
}
xdr_inline_pages(&req->rq_rcv_buf, replen << 2,
args->acl_pages, args->acl_pgbase, args->acl_len);
- xdr_set_scratch_buffer(xdr, page_address(args->acl_scratch), PAGE_SIZE);
encode_nops(&hdr);
}
struct compound_hdr hdr;
int status;
+ if (res->acl_scratch != NULL) {
+ void *p = page_address(res->acl_scratch);
+ xdr_set_scratch_buffer(xdr, p, PAGE_SIZE);
+ }
status = decode_compound_hdr(xdr, &hdr);
if (status)
goto out;
/**
* attrib.c - NTFS attribute operations. Part of the Linux-NTFS project.
*
- * Copyright (c) 2001-2007 Anton Altaparmakov
+ * Copyright (c) 2001-2012 Anton Altaparmakov and Tuxera Inc.
* Copyright (c) 2002 Richard Russon
*
* This program/include file is free software; you can redistribute it and/or
unsigned long flags;
bool is_retry = false;
+ BUG_ON(!ni);
ntfs_debug("Entering for i_ino 0x%lx, vcn 0x%llx, %s_locked.",
ni->mft_no, (unsigned long long)vcn,
write_locked ? "write" : "read");
- BUG_ON(!ni);
BUG_ON(!NInoNonResident(ni));
BUG_ON(vcn < 0);
if (!ni->runlist.rl) {
int err = 0;
bool is_retry = false;
+ BUG_ON(!ni);
ntfs_debug("Entering for i_ino 0x%lx, vcn 0x%llx, with%s ctx.",
ni->mft_no, (unsigned long long)vcn, ctx ? "" : "out");
- BUG_ON(!ni);
BUG_ON(!NInoNonResident(ni));
BUG_ON(vcn < 0);
if (!ni->runlist.rl) {
/**
* mft.c - NTFS kernel mft record operations. Part of the Linux-NTFS project.
*
- * Copyright (c) 2001-2011 Anton Altaparmakov and Tuxera Inc.
+ * Copyright (c) 2001-2012 Anton Altaparmakov and Tuxera Inc.
* Copyright (c) 2002 Richard Russon
*
* This program/include file is free software; you can redistribute it and/or
ntfs_error(vol->sb, "Failed to merge runlists for mft "
"bitmap.");
if (ntfs_cluster_free_from_rl(vol, rl2)) {
- ntfs_error(vol->sb, "Failed to dealocate "
+ ntfs_error(vol->sb, "Failed to deallocate "
"allocated cluster.%s", es);
NVolSetErrors(vol);
}
ntfs_error(vol->sb, "Failed to merge runlists for mft data "
"attribute.");
if (ntfs_cluster_free_from_rl(vol, rl2)) {
- ntfs_error(vol->sb, "Failed to dealocate clusters "
+ ntfs_error(vol->sb, "Failed to deallocate clusters "
"from the mft data attribute.%s", es);
NVolSetErrors(vol);
}
/*
* super.c - NTFS kernel super block handling. Part of the Linux-NTFS project.
*
- * Copyright (c) 2001-2011 Anton Altaparmakov and Tuxera Inc.
+ * Copyright (c) 2001-2012 Anton Altaparmakov and Tuxera Inc.
* Copyright (c) 2001,2002 Richard Russon
*
* This program/include file is free software; you can redistribute it and/or
{
MFT_REF mref;
struct inode *vi;
- ntfs_inode *ni;
struct page *page;
u32 *kaddr, *kend;
ntfs_name *name = NULL;
"is not the system volume.", i_size_read(vi));
goto iput_out;
}
- ni = NTFS_I(vi);
page = ntfs_map_page(vi->i_mapping, 0);
if (IS_ERR(page)) {
ntfs_error(vol->sb, "Failed to read from hiberfil.sys.");
handle_t *handle = NULL;
struct buffer_head *old_dir_bh = NULL;
struct buffer_head *new_dir_bh = NULL;
- nlink_t old_dir_nlink = old_dir->i_nlink;
+ u32 old_dir_nlink = old_dir->i_nlink;
struct ocfs2_dinode *old_di;
struct ocfs2_dir_lookup_result old_inode_dot_dot_res = { NULL, };
struct ocfs2_dir_lookup_result target_lookup_res = { NULL, };
}
}
+/* Return 1 if 'cmd' will block on frozen filesystem */
+static int quotactl_cmd_write(int cmd)
+{
+ switch (cmd) {
+ case Q_GETFMT:
+ case Q_GETINFO:
+ case Q_SYNC:
+ case Q_XGETQSTAT:
+ case Q_XGETQUOTA:
+ case Q_XQUOTASYNC:
+ return 0;
+ }
+ return 1;
+}
+
/*
* look up a superblock on which quota ops will be performed
* - use the name of a block device to find the superblock thereon
*/
-static struct super_block *quotactl_block(const char __user *special)
+static struct super_block *quotactl_block(const char __user *special, int cmd)
{
#ifdef CONFIG_BLOCK
struct block_device *bdev;
putname(tmp);
if (IS_ERR(bdev))
return ERR_CAST(bdev);
- sb = get_super(bdev);
+ if (quotactl_cmd_write(cmd))
+ sb = get_super_thawed(bdev);
+ else
+ sb = get_super(bdev);
bdput(bdev);
if (!sb)
return ERR_PTR(-ENODEV);
pathp = &path;
}
- sb = quotactl_block(special);
+ sb = quotactl_block(special, cmds);
if (IS_ERR(sb)) {
ret = PTR_ERR(sb);
goto out;
}
SYSCALL_DEFINE3(poll, struct pollfd __user *, ufds, unsigned int, nfds,
- long, timeout_msecs)
+ int, timeout_msecs)
{
struct timespec end_time, *to = NULL;
int ret;
#include <linux/signalfd.h>
#include <linux/syscalls.h>
+void signalfd_cleanup(struct sighand_struct *sighand)
+{
+ wait_queue_head_t *wqh = &sighand->signalfd_wqh;
+ /*
+ * The lockless check can race with remove_wait_queue() in progress,
+ * but in this case its caller should run under rcu_read_lock() and
+ * sighand_cachep is SLAB_DESTROY_BY_RCU, we can safely return.
+ */
+ if (likely(!waitqueue_active(wqh)))
+ return;
+
+ /* wait_queue_t->func(POLLFREE) should do remove_wait_queue() */
+ wake_up_poll(wqh, POLLHUP | POLLFREE);
+}
+
struct signalfd_ctx {
sigset_t sigmask;
};
EXPORT_SYMBOL(get_super);
+/**
+ * get_super_thawed - get thawed superblock of a device
+ * @bdev: device to get the superblock for
+ *
+ * Scans the superblock list and finds the superblock of the file system
+ * mounted on the device. The superblock is returned once it is thawed
+ * (or immediately if it was not frozen). %NULL is returned if no match
+ * is found.
+ */
+struct super_block *get_super_thawed(struct block_device *bdev)
+{
+ while (1) {
+ struct super_block *s = get_super(bdev);
+ if (!s || s->s_frozen == SB_UNFROZEN)
+ return s;
+ up_read(&s->s_umount);
+ vfs_check_frozen(s, SB_FREEZE_WRITE);
+ put_super(s);
+ }
+}
+EXPORT_SYMBOL(get_super_thawed);
+
/**
* get_active_super - get an active reference to the superblock of a device
* @bdev: device to get the superblock for
if (!d->d_btimer) {
if ((d->d_blk_softlimit &&
- (be64_to_cpu(d->d_bcount) >=
+ (be64_to_cpu(d->d_bcount) >
be64_to_cpu(d->d_blk_softlimit))) ||
(d->d_blk_hardlimit &&
- (be64_to_cpu(d->d_bcount) >=
+ (be64_to_cpu(d->d_bcount) >
be64_to_cpu(d->d_blk_hardlimit)))) {
d->d_btimer = cpu_to_be32(get_seconds() +
mp->m_quotainfo->qi_btimelimit);
}
} else {
if ((!d->d_blk_softlimit ||
- (be64_to_cpu(d->d_bcount) <
+ (be64_to_cpu(d->d_bcount) <=
be64_to_cpu(d->d_blk_softlimit))) &&
(!d->d_blk_hardlimit ||
- (be64_to_cpu(d->d_bcount) <
+ (be64_to_cpu(d->d_bcount) <=
be64_to_cpu(d->d_blk_hardlimit)))) {
d->d_btimer = 0;
}
if (!d->d_itimer) {
if ((d->d_ino_softlimit &&
- (be64_to_cpu(d->d_icount) >=
+ (be64_to_cpu(d->d_icount) >
be64_to_cpu(d->d_ino_softlimit))) ||
(d->d_ino_hardlimit &&
- (be64_to_cpu(d->d_icount) >=
+ (be64_to_cpu(d->d_icount) >
be64_to_cpu(d->d_ino_hardlimit)))) {
d->d_itimer = cpu_to_be32(get_seconds() +
mp->m_quotainfo->qi_itimelimit);
}
} else {
if ((!d->d_ino_softlimit ||
- (be64_to_cpu(d->d_icount) <
+ (be64_to_cpu(d->d_icount) <=
be64_to_cpu(d->d_ino_softlimit))) &&
(!d->d_ino_hardlimit ||
- (be64_to_cpu(d->d_icount) <
+ (be64_to_cpu(d->d_icount) <=
be64_to_cpu(d->d_ino_hardlimit)))) {
d->d_itimer = 0;
}
if (!d->d_rtbtimer) {
if ((d->d_rtb_softlimit &&
- (be64_to_cpu(d->d_rtbcount) >=
+ (be64_to_cpu(d->d_rtbcount) >
be64_to_cpu(d->d_rtb_softlimit))) ||
(d->d_rtb_hardlimit &&
- (be64_to_cpu(d->d_rtbcount) >=
+ (be64_to_cpu(d->d_rtbcount) >
be64_to_cpu(d->d_rtb_hardlimit)))) {
d->d_rtbtimer = cpu_to_be32(get_seconds() +
mp->m_quotainfo->qi_rtbtimelimit);
}
} else {
if ((!d->d_rtb_softlimit ||
- (be64_to_cpu(d->d_rtbcount) <
+ (be64_to_cpu(d->d_rtbcount) <=
be64_to_cpu(d->d_rtb_softlimit))) &&
(!d->d_rtb_hardlimit ||
- (be64_to_cpu(d->d_rtbcount) <
+ (be64_to_cpu(d->d_rtbcount) <=
be64_to_cpu(d->d_rtb_hardlimit)))) {
d->d_rtbtimer = 0;
}
if (!errs && ddq->d_id) {
if (ddq->d_blk_softlimit &&
- be64_to_cpu(ddq->d_bcount) >=
+ be64_to_cpu(ddq->d_bcount) >
be64_to_cpu(ddq->d_blk_softlimit)) {
if (!ddq->d_btimer) {
if (flags & XFS_QMOPT_DOWARN)
}
}
if (ddq->d_ino_softlimit &&
- be64_to_cpu(ddq->d_icount) >=
+ be64_to_cpu(ddq->d_icount) >
be64_to_cpu(ddq->d_ino_softlimit)) {
if (!ddq->d_itimer) {
if (flags & XFS_QMOPT_DOWARN)
}
}
if (ddq->d_rtb_softlimit &&
- be64_to_cpu(ddq->d_rtbcount) >=
+ be64_to_cpu(ddq->d_rtbcount) >
be64_to_cpu(ddq->d_rtb_softlimit)) {
if (!ddq->d_rtbtimer) {
if (flags & XFS_QMOPT_DOWARN)
(XFS_IS_OQUOTA_ENFORCED(mp) &&
(dst->d_flags & (FS_PROJ_QUOTA | FS_GROUP_QUOTA)))) &&
dst->d_id != 0) {
- if (((int) dst->d_bcount >= (int) dst->d_blk_softlimit) &&
+ if (((int) dst->d_bcount > (int) dst->d_blk_softlimit) &&
(dst->d_blk_softlimit > 0)) {
ASSERT(dst->d_btimer != 0);
}
- if (((int) dst->d_icount >= (int) dst->d_ino_softlimit) &&
+ if (((int) dst->d_icount > (int) dst->d_ino_softlimit) &&
(dst->d_ino_softlimit > 0)) {
ASSERT(dst->d_itimer != 0);
}
{
struct xfs_log_item_desc *lidp;
- ASSERT(lip->li_mountp = tp->t_mountp);
- ASSERT(lip->li_ailp = tp->t_mountp->m_ail);
+ ASSERT(lip->li_mountp == tp->t_mountp);
+ ASSERT(lip->li_ailp == tp->t_mountp->m_ail);
lidp = kmem_zone_zalloc(xfs_log_item_desc_zone, KM_SLEEP | KM_NOFS);
* nblks.
*/
if (hardlimit > 0ULL &&
- hardlimit <= nblks + *resbcountp) {
+ hardlimit < nblks + *resbcountp) {
xfs_quota_warn(mp, dqp, QUOTA_NL_BHARDWARN);
goto error_return;
}
if (softlimit > 0ULL &&
- softlimit <= nblks + *resbcountp) {
+ softlimit < nblks + *resbcountp) {
if ((timer != 0 && get_seconds() > timer) ||
(warns != 0 && warns >= warnlimit)) {
xfs_quota_warn(mp, dqp,
if (!softlimit)
softlimit = q->qi_isoftlimit;
- if (hardlimit > 0ULL && count >= hardlimit) {
+ if (hardlimit > 0ULL &&
+ hardlimit < ninos + count) {
xfs_quota_warn(mp, dqp, QUOTA_NL_IHARDWARN);
goto error_return;
}
- if (softlimit > 0ULL && count >= softlimit) {
+ if (softlimit > 0ULL &&
+ softlimit < ninos + count) {
if ((timer != 0 && get_seconds() > timer) ||
(warns != 0 && warns >= warnlimit)) {
xfs_quota_warn(mp, dqp,
--- /dev/null
+#ifndef _ASM_IO_64_NONATOMIC_HI_LO_H_
+#define _ASM_IO_64_NONATOMIC_HI_LO_H_
+
+#include <linux/io.h>
+#include <asm-generic/int-ll64.h>
+
+#ifndef readq
+static inline __u64 readq(const volatile void __iomem *addr)
+{
+ const volatile u32 __iomem *p = addr;
+ u32 low, high;
+
+ high = readl(p + 1);
+ low = readl(p);
+
+ return low + ((u64)high << 32);
+}
+#endif
+
+#ifndef writeq
+static inline void writeq(__u64 val, volatile void __iomem *addr)
+{
+ writel(val >> 32, addr + 4);
+ writel(val, addr);
+}
+#endif
+
+#endif /* _ASM_IO_64_NONATOMIC_HI_LO_H_ */
--- /dev/null
+#ifndef _ASM_IO_64_NONATOMIC_LO_HI_H_
+#define _ASM_IO_64_NONATOMIC_LO_HI_H_
+
+#include <linux/io.h>
+#include <asm-generic/int-ll64.h>
+
+#ifndef readq
+static inline __u64 readq(const volatile void __iomem *addr)
+{
+ const volatile u32 __iomem *p = addr;
+ u32 low, high;
+
+ low = readl(p);
+ high = readl(p + 1);
+
+ return low + ((u64)high << 32);
+}
+#endif
+
+#ifndef writeq
+static inline void writeq(__u64 val, volatile void __iomem *addr)
+{
+ writel(val, addr);
+ writel(val >> 32, addr + 4);
+}
+#endif
+
+#endif /* _ASM_IO_64_NONATOMIC_LO_HI_H_ */
/* Destroy a virtual mapping cookie for a PCI BAR (memory or IO) */
struct pci_dev;
extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
-#else
+#elif defined(CONFIG_GENERIC_IOMAP)
struct pci_dev;
static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
{ }
#define __pci_ioport_map(dev, port, nr) ioport_map((port), (nr))
#endif
-#else
+#elif defined(CONFIG_GENERIC_PCI_IOMAP)
static inline void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
{
return NULL;
#define POLLRDHUP 0x2000
#endif
+#define POLLFREE 0x4000 /* currently only for epoll */
+
struct pollfd {
int fd;
short events;
header-y += drm_fourcc.h
header-y += drm_mode.h
header-y += drm_sarea.h
+header-y += exynos_drm.h
header-y += i810_drm.h
header-y += i915_drm.h
header-y += mga_drm.h
#define DRM_IOCTL_EXYNOS_PLANE_SET_ZPOS DRM_IOWR(DRM_COMMAND_BASE + \
DRM_EXYNOS_PLANE_SET_ZPOS, struct drm_exynos_plane_set_zpos)
+#ifdef __KERNEL__
+
/**
- * Platform Specific Structure for DRM based FIMD.
+ * A structure for lcd panel information.
*
* @timing: default video mode for initializing
+ * @width_mm: physical size of lcd width.
+ * @height_mm: physical size of lcd height.
+ */
+struct exynos_drm_panel_info {
+ struct fb_videomode timing;
+ u32 width_mm;
+ u32 height_mm;
+};
+
+/**
+ * Platform Specific Structure for DRM based FIMD.
+ *
+ * @panel: default panel info for initializing
* @default_win: default window layer number to be used for UI.
* @bpp: default bit per pixel.
*/
struct exynos_drm_fimd_pdata {
- struct fb_videomode timing;
+ struct exynos_drm_panel_info panel;
u32 vidcon0;
u32 vidcon1;
unsigned int default_win;
unsigned int bpp;
};
-#endif
+#endif /* __KERNEL__ */
+#endif /* _EXYNOS_DRM_H_ */
return sizeof(w) == 4 ? hweight32(w) : hweight64(w);
}
+/**
+ * rol64 - rotate a 64-bit value left
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u64 rol64(__u64 word, unsigned int shift)
+{
+ return (word << shift) | (word >> (64 - shift));
+}
+
+/**
+ * ror64 - rotate a 64-bit value right
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u64 ror64(__u64 word, unsigned int shift)
+{
+ return (word >> shift) | (word << (64 - shift));
+}
+
/**
* rol32 - rotate a 32-bit value left
* @word: value to rotate
unsigned long liovcnt, const struct compat_iovec __user *rvec,
unsigned long riovcnt, unsigned long flags);
+#else
+
+#define is_compat_task() (0)
+
#endif /* CONFIG_COMPAT */
#endif /* _LINUX_COMPAT_H */
static inline int dentry_cmp(const unsigned char *cs, size_t scount,
const unsigned char *ct, size_t tcount)
{
- int ret;
if (scount != tcount)
return 1;
+
do {
- ret = (*cs != *ct);
- if (ret)
- break;
+ if (*cs != *ct)
+ return 1;
cs++;
ct++;
tcount--;
} while (tcount);
- return ret;
+ return 0;
}
/* Name hashing routines. Initial hash value */
}
/* Compute the hash for a name string. */
-static inline unsigned int
-full_name_hash(const unsigned char *name, unsigned int len)
-{
- unsigned long hash = init_name_hash();
- while (len--)
- hash = partial_name_hash(*name++, hash);
- return end_name_hash(hash);
-}
+extern unsigned int full_name_hash(const unsigned char *, unsigned int);
/*
* Try to keep struct dentry aligned on 64 byte cachelines (this will
extern struct dentry *d_lookup(struct dentry *, struct qstr *);
extern struct dentry *d_hash_and_lookup(struct dentry *, struct qstr *);
extern struct dentry *__d_lookup(struct dentry *, struct qstr *);
-extern struct dentry *__d_lookup_rcu(struct dentry *parent, struct qstr *name,
+extern struct dentry *__d_lookup_rcu(const struct dentry *parent,
+ const struct qstr *name,
unsigned *seq, struct inode **inode);
/**
struct pubkey_hdr {
uint8_t version; /* key format version */
- time_t timestamp; /* key made, always 0 for now */
+ uint32_t timestamp; /* key made, always 0 for now */
uint8_t algo;
uint8_t nmpi;
char mpi[0];
struct signature_hdr {
uint8_t version; /* signature format version */
- time_t timestamp; /* signature made */
+ uint32_t timestamp; /* signature made */
uint8_t algo;
uint8_t hash;
uint8_t keyid[8];
extern void put_filesystem(struct file_system_type *fs);
extern struct file_system_type *get_fs_type(const char *name);
extern struct super_block *get_super(struct block_device *);
+extern struct super_block *get_super_thawed(struct block_device *);
extern struct super_block *get_active_super(struct block_device *bdev);
extern void drop_super(struct super_block *sb);
extern void iterate_supers(void (*)(struct super_block *, void *), void *);
IFLA_AF_SPEC,
IFLA_GROUP, /* Group the device belongs to */
IFLA_NET_NS_FD,
+ IFLA_EXT_MASK, /* Extended info mask, VFs, etc */
__IFLA_MAX
};
#define MMC_CARD_SDXC (1<<6) /* card is SDXC */
#define MMC_CARD_REMOVED (1<<7) /* card has been removed */
#define MMC_STATE_HIGHSPEED_200 (1<<8) /* card is in HS200 mode */
+#define MMC_STATE_SLEEP (1<<9) /* card is in sleep state */
unsigned int quirks; /* card quirks */
#define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */
#define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */
#define mmc_sd_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED)
#define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC)
#define mmc_card_removed(c) ((c) && ((c)->state & MMC_CARD_REMOVED))
+#define mmc_card_is_sleep(c) ((c)->state & MMC_STATE_SLEEP)
#define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT)
#define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
#define mmc_sd_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)
#define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC)
#define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED)
+#define mmc_card_set_sleep(c) ((c)->state |= MMC_STATE_SLEEP)
+#define mmc_card_clr_sleep(c) ((c)->state &= ~MMC_STATE_SLEEP)
/*
* Quirk add/remove for MMC products.
*/
#ifndef LINUX_MMC_DW_MMC_H
#define LINUX_MMC_DW_MMC_H
+#include <linux/scatterlist.h>
+
#define MAX_MCI_SLOTS 2
enum dw_mci_state {
* @lock: Spinlock protecting the queue and associated data.
* @regs: Pointer to MMIO registers.
* @sg: Scatterlist entry currently being processed by PIO code, if any.
- * @pio_offset: Offset into the current scatterlist entry.
+ * @sg_miter: PIO mapping scatterlist iterator.
* @cur_slot: The slot which is currently using the controller.
* @mrq: The request currently being processed on @cur_slot,
* or NULL if the controller is idle.
void __iomem *regs;
struct scatterlist *sg;
- unsigned int pio_offset;
+ struct sg_mapping_iter sg_miter;
struct dw_mci_slot *cur_slot;
struct mmc_request *mrq;
#define MMC_CAP2_HS200_1_2V_SDR (1 << 6) /* can support */
#define MMC_CAP2_HS200 (MMC_CAP2_HS200_1_8V_SDR | \
MMC_CAP2_HS200_1_2V_SDR)
+#define MMC_CAP2_BROKEN_VOLTAGE (1 << 7) /* Use the broken voltage */
mmc_pm_flag_t pm_caps; /* supported pm features */
unsigned int power_notify_type;
return !(host->caps2 & MMC_CAP2_BOOTPART_NOACC);
}
+#ifdef CONFIG_MMC_CLKGATE
+void mmc_host_clk_hold(struct mmc_host *host);
+void mmc_host_clk_release(struct mmc_host *host);
+unsigned int mmc_host_clk_rate(struct mmc_host *host);
+
+#else
+static inline void mmc_host_clk_hold(struct mmc_host *host)
+{
+}
+
+static inline void mmc_host_clk_release(struct mmc_host *host)
+{
+}
+
+static inline unsigned int mmc_host_clk_rate(struct mmc_host *host)
+{
+ return host->ios.clock;
+}
+#endif
#endif /* LINUX_MMC_HOST_H */
struct module *me;
};
-#define EBT_ALIGN(s) (((s) + (__alignof__(struct ebt_replace)-1)) & \
- ~(__alignof__(struct ebt_replace)-1))
+#define EBT_ALIGN(s) (((s) + (__alignof__(struct _xt_align)-1)) & \
+ ~(__alignof__(struct _xt_align)-1))
extern struct ebt_table *ebt_register_table(struct net *net,
const struct ebt_table *table);
extern void ebt_unregister_table(struct net *net, struct ebt_table *table);
size_t acl_len;
unsigned int acl_pgbase;
struct page ** acl_pages;
- struct page * acl_scratch;
struct nfs4_sequence_args seq_args;
};
size_t acl_len;
size_t acl_data_offset;
int acl_flags;
+ struct page * acl_scratch;
struct nfs4_sequence_res seq_res;
};
{
const struct user_regset *regset = &view->regsets[setno];
+ if (!regset->get)
+ return -EOPNOTSUPP;
+
if (!access_ok(VERIFY_WRITE, data, size))
- return -EIO;
+ return -EFAULT;
return regset->get(target, regset, offset, size, NULL, data);
}
{
const struct user_regset *regset = &view->regsets[setno];
+ if (!regset->set)
+ return -EOPNOTSUPP;
+
if (!access_ok(VERIFY_READ, data, size))
- return -EIO;
+ return -EFAULT;
return regset->set(target, regset, offset, size, NULL, data);
}
#define TCA_ACT_TAB 1 /* attr type must be >=1 */
#define TCAA_MAX 1
+/* New extended info filters for IFLA_EXT_MASK */
+#define RTEXT_FILTER_VF (1 << 0)
+
/* End of information exported to user level */
#ifdef __KERNEL__
wake_up(&tsk->sighand->signalfd_wqh);
}
+extern void signalfd_cleanup(struct sighand_struct *sighand);
+
#else /* CONFIG_SIGNALFD */
static inline void signalfd_notify(struct task_struct *tsk, int sig) { }
+static inline void signalfd_cleanup(struct sighand_struct *sighand) { }
+
#endif /* CONFIG_SIGNALFD */
#endif /* __KERNEL__ */
#endif /* _LINUX_SIGNALFD_H */
-
}
#endif /* NET_SKBUFF_DATA_USES_OFFSET */
+static inline void skb_mac_header_rebuild(struct sk_buff *skb)
+{
+ if (skb_mac_header_was_set(skb)) {
+ const unsigned char *old_mac = skb_mac_header(skb);
+
+ skb_set_mac_header(skb, -skb->mac_len);
+ memmove(skb_mac_header(skb), old_mac, skb->mac_len);
+ }
+}
+
static inline int skb_checksum_start_offset(const struct sk_buff *skb)
{
return skb->csum_start - skb_headroom(skb);
asmlinkage long sys_socketcall(int call, unsigned long __user *args);
asmlinkage long sys_listen(int, int);
asmlinkage long sys_poll(struct pollfd __user *ufds, unsigned int nfds,
- long timeout);
+ int timeout);
asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp,
fd_set __user *exp, struct timeval __user *tvp);
asmlinkage long sys_old_select(struct sel_arg_struct __user *arg);
#define USB_PORT_FEAT_TEST 21
#define USB_PORT_FEAT_INDICATOR 22
#define USB_PORT_FEAT_C_PORT_L1 23
-#define USB_PORT_FEAT_C_PORT_LINK_STATE 25
-#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26
-#define USB_PORT_FEAT_PORT_REMOTE_WAKE_MASK 27
-#define USB_PORT_FEAT_BH_PORT_RESET 28
-#define USB_PORT_FEAT_C_BH_PORT_RESET 29
-#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30
/*
* Port feature selectors added by USB 3.0 spec.
#define USB_PORT_FEAT_LINK_STATE 5
#define USB_PORT_FEAT_U1_TIMEOUT 23
#define USB_PORT_FEAT_U2_TIMEOUT 24
-#define USB_PORT_FEAT_C_LINK_STATE 25
-#define USB_PORT_FEAT_C_CONFIG_ERR 26
+#define USB_PORT_FEAT_C_PORT_LINK_STATE 25
+#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26
#define USB_PORT_FEAT_REMOTE_WAKE_MASK 27
#define USB_PORT_FEAT_BH_PORT_RESET 28
#define USB_PORT_FEAT_C_BH_PORT_RESET 29
int sco_init(void);
void sco_exit(void);
+void bt_sock_reclassify_lock(struct sock *sk, int proto);
+
#endif /* __BLUETOOTH_H */
static inline void hci_conn_hold(struct hci_conn *conn)
{
atomic_inc(&conn->refcnt);
- cancel_delayed_work_sync(&conn->disc_work);
+ cancel_delayed_work(&conn->disc_work);
}
static inline void hci_conn_put(struct hci_conn *conn)
} else {
timeo = msecs_to_jiffies(10);
}
- cancel_delayed_work_sync(&conn->disc_work);
+ cancel_delayed_work(&conn->disc_work);
queue_delayed_work(conn->hdev->workqueue,
- &conn->disc_work, jiffies + timeo);
+ &conn->disc_work, timeo);
}
}
{
BT_DBG("chan %p state %d timeout %ld", chan, chan->state, timeout);
- if (!__cancel_delayed_work(work))
+ if (!cancel_delayed_work(work))
l2cap_chan_hold(chan);
schedule_delayed_work(work, timeout);
}
static inline void l2cap_clear_timer(struct l2cap_chan *chan,
struct delayed_work *work)
{
- if (__cancel_delayed_work(work))
+ if (cancel_delayed_work(work))
l2cap_chan_put(chan);
}
#define __set_chan_timer(c, t) l2cap_set_timer(c, &c->chan_timer, (t))
#define __clear_chan_timer(c) l2cap_clear_timer(c, &c->chan_timer)
#define __set_retrans_timer(c) l2cap_set_timer(c, &c->retrans_timer, \
- L2CAP_DEFAULT_RETRANS_TO);
+ msecs_to_jiffies(L2CAP_DEFAULT_RETRANS_TO));
#define __clear_retrans_timer(c) l2cap_clear_timer(c, &c->retrans_timer)
#define __set_monitor_timer(c) l2cap_set_timer(c, &c->monitor_timer, \
- L2CAP_DEFAULT_MONITOR_TO);
+ msecs_to_jiffies(L2CAP_DEFAULT_MONITOR_TO));
#define __clear_monitor_timer(c) l2cap_clear_timer(c, &c->monitor_timer)
#define __set_ack_timer(c) l2cap_set_timer(c, &chan->ack_timer, \
- L2CAP_DEFAULT_ACK_TO);
+ msecs_to_jiffies(L2CAP_DEFAULT_ACK_TO));
#define __clear_ack_timer(c) l2cap_clear_timer(c, &c->ack_timer)
static inline int __seq_offset(struct l2cap_chan *chan, __u16 seq1, __u16 seq2)
struct l2cap_chan *l2cap_chan_create(struct sock *sk);
void l2cap_chan_close(struct l2cap_chan *chan, int reason);
void l2cap_chan_destroy(struct l2cap_chan *chan);
-inline int l2cap_chan_connect(struct l2cap_chan *chan, __le16 psm, u16 cid,
+int l2cap_chan_connect(struct l2cap_chan *chan, __le16 psm, u16 cid,
bdaddr_t *dst);
int l2cap_chan_send(struct l2cap_chan *chan, struct msghdr *msg, size_t len,
u32 priority);
__nf_conntrack_find(struct net *net, u16 zone,
const struct nf_conntrack_tuple *tuple);
-extern void nf_conntrack_hash_insert(struct nf_conn *ct);
+extern int nf_conntrack_hash_check_insert(struct nf_conn *ct);
extern void nf_ct_delete_from_lists(struct nf_conn *ct);
extern void nf_ct_insert_dying_list(struct nf_conn *ct);
typedef int (*rtnl_doit_func)(struct sk_buff *, struct nlmsghdr *, void *);
typedef int (*rtnl_dumpit_func)(struct sk_buff *, struct netlink_callback *);
-typedef u16 (*rtnl_calcit_func)(struct sk_buff *);
+typedef u16 (*rtnl_calcit_func)(struct sk_buff *, struct nlmsghdr *);
extern int __rtnl_register(int protocol, int msgtype,
rtnl_doit_func, rtnl_dumpit_func,
(unsigned long long)__entry->vruntime)
);
-#ifdef CREATE_TRACE_POINTS
-static inline u64 trace_get_sleeptime(struct task_struct *tsk)
-{
-#ifdef CONFIG_SCHEDSTATS
- u64 block, sleep;
-
- block = tsk->se.statistics.block_start;
- sleep = tsk->se.statistics.sleep_start;
- tsk->se.statistics.block_start = 0;
- tsk->se.statistics.sleep_start = 0;
-
- return block ? block : sleep ? sleep : 0;
-#else
- return 0;
-#endif
-}
-#endif
-
-/*
- * Tracepoint for accounting sleeptime (time the task is sleeping
- * or waiting for I/O).
- */
-TRACE_EVENT(sched_stat_sleeptime,
-
- TP_PROTO(struct task_struct *tsk, u64 now),
-
- TP_ARGS(tsk, now),
-
- TP_STRUCT__entry(
- __array( char, comm, TASK_COMM_LEN )
- __field( pid_t, pid )
- __field( u64, sleeptime )
- ),
-
- TP_fast_assign(
- memcpy(__entry->comm, tsk->comm, TASK_COMM_LEN);
- __entry->pid = tsk->pid;
- __entry->sleeptime = trace_get_sleeptime(tsk);
- __entry->sleeptime = __entry->sleeptime ?
- now - __entry->sleeptime : 0;
- )
- TP_perf_assign(
- __perf_count(__entry->sleeptime);
- ),
-
- TP_printk("comm=%s pid=%d sleeptime=%Lu [ns]",
- __entry->comm, __entry->pid,
- (unsigned long long)__entry->sleeptime)
-);
-
/*
* Tracepoint for showing priority inheritance modifying a tasks
* priority.
err_alloc:
for_each_possible_cpu(err_cpu) {
- if (err_cpu == cpu)
- break;
for (i = 0; i < TYPE_MAX; i++)
kfree(per_cpu(nr_task_bp_pinned[i], cpu));
+ if (err_cpu == cpu)
+ break;
}
return -ENOMEM;
#include <linux/user-return-notifier.h>
#include <linux/oom.h>
#include <linux/khugepaged.h>
+#include <linux/signalfd.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
void __cleanup_sighand(struct sighand_struct *sighand)
{
- if (atomic_dec_and_test(&sighand->count))
+ if (atomic_dec_and_test(&sighand->count)) {
+ signalfd_cleanup(sighand);
kmem_cache_free(sighand_cachep, sighand);
+ }
}
if (desc->irq_data.chip->irq_set_type)
desc->irq_data.chip->irq_set_type(&desc->irq_data,
IRQ_TYPE_PROBE);
- irq_startup(desc);
+ irq_startup(desc, false);
}
raw_spin_unlock_irq(&desc->lock);
}
raw_spin_lock_irq(&desc->lock);
if (!desc->action && irq_settings_can_probe(desc)) {
desc->istate |= IRQS_AUTODETECT | IRQS_WAITING;
- if (irq_startup(desc))
+ if (irq_startup(desc, false))
desc->istate |= IRQS_PENDING;
}
raw_spin_unlock_irq(&desc->lock);
irqd_set(&desc->irq_data, IRQD_IRQ_MASKED);
}
-int irq_startup(struct irq_desc *desc)
+int irq_startup(struct irq_desc *desc, bool resend)
{
+ int ret = 0;
+
irq_state_clr_disabled(desc);
desc->depth = 0;
if (desc->irq_data.chip->irq_startup) {
- int ret = desc->irq_data.chip->irq_startup(&desc->irq_data);
+ ret = desc->irq_data.chip->irq_startup(&desc->irq_data);
irq_state_clr_masked(desc);
- return ret;
+ } else {
+ irq_enable(desc);
}
-
- irq_enable(desc);
- return 0;
+ if (resend)
+ check_irq_resend(desc, desc->irq_data.irq);
+ return ret;
}
void irq_shutdown(struct irq_desc *desc)
}
EXPORT_SYMBOL_GPL(handle_simple_irq);
+/*
+ * Called unconditionally from handle_level_irq() and only for oneshot
+ * interrupts from handle_fasteoi_irq()
+ */
+static void cond_unmask_irq(struct irq_desc *desc)
+{
+ /*
+ * We need to unmask in the following cases:
+ * - Standard level irq (IRQF_ONESHOT is not set)
+ * - Oneshot irq which did not wake the thread (caused by a
+ * spurious interrupt or a primary handler handling it
+ * completely).
+ */
+ if (!irqd_irq_disabled(&desc->irq_data) &&
+ irqd_irq_masked(&desc->irq_data) && !desc->threads_oneshot)
+ unmask_irq(desc);
+}
+
/**
* handle_level_irq - Level type irq handler
* @irq: the interrupt number
handle_irq_event(desc);
- if (!irqd_irq_disabled(&desc->irq_data) && !(desc->istate & IRQS_ONESHOT))
- unmask_irq(desc);
+ cond_unmask_irq(desc);
+
out_unlock:
raw_spin_unlock(&desc->lock);
}
preflow_handler(desc);
handle_irq_event(desc);
+ if (desc->istate & IRQS_ONESHOT)
+ cond_unmask_irq(desc);
+
out_eoi:
desc->irq_data.chip->irq_eoi(&desc->irq_data);
out_unlock:
irq_settings_set_noprobe(desc);
irq_settings_set_norequest(desc);
irq_settings_set_nothread(desc);
- irq_startup(desc);
+ irq_startup(desc, true);
}
out:
irq_put_desc_busunlock(desc, flags);
extern void __disable_irq(struct irq_desc *desc, unsigned int irq, bool susp);
extern void __enable_irq(struct irq_desc *desc, unsigned int irq, bool resume);
-extern int irq_startup(struct irq_desc *desc);
+extern int irq_startup(struct irq_desc *desc, bool resend);
extern void irq_shutdown(struct irq_desc *desc);
extern void irq_enable(struct irq_desc *desc);
extern void irq_disable(struct irq_desc *desc);
desc->istate |= IRQS_ONESHOT;
if (irq_settings_can_autoenable(desc))
- irq_startup(desc);
+ irq_startup(desc, true);
else
/* Undo nested disables: */
desc->depth = 1;
*/
void __init pidhash_init(void)
{
- int i, pidhash_size;
+ unsigned int i, pidhash_size;
pid_hash = alloc_large_system_hash("PID", sizeof(*pid_hash), 0, 18,
HASH_EARLY | HASH_SMALL,
&pidhash_shift, NULL, 4096);
- pidhash_size = 1 << pidhash_shift;
+ pidhash_size = 1U << pidhash_shift;
for (i = 0; i < pidhash_size; i++)
INIT_HLIST_HEAD(&pid_hash[i]);
local_irq_enable();
#endif /* __ARCH_WANT_INTERRUPTS_ON_CTXSW */
finish_lock_switch(rq, prev);
- trace_sched_stat_sleeptime(current, rq->clock);
fire_sched_in_preempt_notifiers(current);
if (mm)
static int cpuset_cpu_active(struct notifier_block *nfb, unsigned long action,
void *hcpu)
{
- switch (action & ~CPU_TASKS_FROZEN) {
+ switch (action) {
case CPU_ONLINE:
case CPU_DOWN_FAILED:
cpuset_update_active_cpus();
static int cpuset_cpu_inactive(struct notifier_block *nfb, unsigned long action,
void *hcpu)
{
- switch (action & ~CPU_TASKS_FROZEN) {
+ switch (action) {
case CPU_DOWN_PREPARE:
cpuset_update_active_cpus();
return NOTIFY_OK;
if (unlikely(delta > se->statistics.sleep_max))
se->statistics.sleep_max = delta;
+ se->statistics.sleep_start = 0;
se->statistics.sum_sleep_runtime += delta;
if (tsk) {
if (unlikely(delta > se->statistics.block_max))
se->statistics.block_max = delta;
+ se->statistics.block_start = 0;
se->statistics.sum_sleep_runtime += delta;
if (tsk) {
phys_addr_t this_start, this_end, cand;
u64 i;
- /* align @size to avoid excessive fragmentation on reserved array */
- size = round_up(size, align);
-
/* pump up @end */
if (end == MEMBLOCK_ALLOC_ACCESSIBLE)
end = memblock.current_limit;
{
phys_addr_t found;
+ /* align @size to avoid excessive fragmentation on reserved array */
+ size = round_up(size, align);
+
found = memblock_find_in_range_node(0, max_addr, size, align, nid);
if (found && !memblock_reserve(found, size))
return found;
*/
BUG_ON(!thresholds);
+ if (!thresholds->primary)
+ goto unlock;
+
usage = mem_cgroup_usage(memcg, type == _MEMSWAP);
/* Check if a threshold crossed before removing */
/* To be sure that nobody uses thresholds */
synchronize_rcu();
-
+unlock:
mutex_unlock(&memcg->thresholds_lock);
}
if (vma->vm_file) {
mapping = vma->vm_file->f_mapping;
+ mutex_lock(&mapping->i_mmap_mutex);
flush_dcache_mmap_lock(mapping);
vma_prio_tree_insert(vma, &mapping->i_mmap);
flush_dcache_mmap_unlock(mapping);
+ mutex_unlock(&mapping->i_mmap_mutex);
}
/* add the VMA to the tree */
if (vma->vm_file) {
mapping = vma->vm_file->f_mapping;
+ mutex_lock(&mapping->i_mmap_mutex);
flush_dcache_mmap_lock(mapping);
vma_prio_tree_remove(vma, &mapping->i_mmap);
flush_dcache_mmap_unlock(mapping);
+ mutex_unlock(&mapping->i_mmap_mutex);
}
/* remove from the MM's tree and list */
if (vma->vm_next)
vma->vm_next->vm_prev = vma->vm_prev;
-
- vma->vm_mm = NULL;
}
/*
high = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
down_write(&nommu_region_sem);
+ mutex_lock(&inode->i_mapping->i_mmap_mutex);
/* search for VMAs that fall within the dead zone */
vma_prio_tree_foreach(vma, &iter, &inode->i_mapping->i_mmap,
/* found one - only interested if it's shared out of the page
* cache */
if (vma->vm_flags & VM_SHARED) {
+ mutex_unlock(&inode->i_mapping->i_mmap_mutex);
up_write(&nommu_region_sem);
return -ETXTBSY; /* not quite true, but near enough */
}
}
}
+ mutex_unlock(&inode->i_mapping->i_mmap_mutex);
up_write(&nommu_region_sem);
return 0;
}
max = ((unsigned long long)nr_all_pages << PAGE_SHIFT) >> 4;
do_div(max, bucketsize);
}
+ max = min(max, 0x80000000ULL);
if (numentries > max)
numentries = max;
static struct net_device *clip_devs;
static struct atm_vcc *atmarpd;
-static struct neigh_table clip_tbl;
static struct timer_list idle_timer;
+static const struct neigh_ops clip_neigh_ops;
static int to_atmarpd(enum atmarp_ctrl_type type, int itf, __be32 ip)
{
struct atmarp_entry *entry = neighbour_priv(n);
struct clip_vcc *cv;
+ if (n->ops != &clip_neigh_ops)
+ return 0;
for (cv = entry->vccs; cv; cv = cv->next) {
unsigned long exp = cv->last_use + cv->idle_timeout;
static void idle_timer_check(unsigned long dummy)
{
- write_lock(&clip_tbl.lock);
- __neigh_for_each_release(&clip_tbl, neigh_check_cb);
+ write_lock(&arp_tbl.lock);
+ __neigh_for_each_release(&arp_tbl, neigh_check_cb);
mod_timer(&idle_timer, jiffies + CLIP_CHECK_INTERVAL * HZ);
- write_unlock(&clip_tbl.lock);
+ write_unlock(&arp_tbl.lock);
}
static int clip_arp_rcv(struct sk_buff *skb)
"slock-AF_BLUETOOTH-BTPROTO_AVDTP",
};
-static inline void bt_sock_reclassify_lock(struct socket *sock, int proto)
+void bt_sock_reclassify_lock(struct sock *sk, int proto)
{
- struct sock *sk = sock->sk;
-
- if (!sk)
- return;
-
+ BUG_ON(!sk);
BUG_ON(sock_owned_by_user(sk));
sock_lock_init_class_and_name(sk,
bt_slock_key_strings[proto], &bt_slock_key[proto],
bt_key_strings[proto], &bt_lock_key[proto]);
}
+EXPORT_SYMBOL(bt_sock_reclassify_lock);
int bt_sock_register(int proto, const struct net_proto_family *ops)
{
if (bt_proto[proto] && try_module_get(bt_proto[proto]->owner)) {
err = bt_proto[proto]->create(net, sock, proto, kern);
- bt_sock_reclassify_lock(sock, proto);
+ if (!err)
+ bt_sock_reclassify_lock(sock->sk, proto);
module_put(bt_proto[proto]->owner);
}
if (!test_and_set_bit(HCI_CONN_AUTH_PEND, &conn->pend)) {
struct hci_cp_auth_requested cp;
+
+ /* encrypt must be pending if auth is also pending */
+ set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend);
+
cp.handle = cpu_to_le16(conn->handle);
hci_send_cmd(conn->hdev, HCI_OP_AUTH_REQUESTED,
sizeof(cp), &cp);
/* Reset device */
skb_queue_purge(&hdev->cmd_q);
atomic_set(&hdev->cmd_cnt, 1);
- if (!test_bit(HCI_RAW, &hdev->flags)) {
+ if (!test_bit(HCI_RAW, &hdev->flags) &&
+ test_bit(HCI_QUIRK_NO_RESET, &hdev->quirks)) {
set_bit(HCI_INIT, &hdev->flags);
__hci_request(hdev, hci_reset_req, 0,
msecs_to_jiffies(250));
hci_chan_del(conn->hchan);
if (conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_SENT)
- __cancel_delayed_work(&conn->info_timer);
+ cancel_delayed_work_sync(&conn->info_timer);
if (test_and_clear_bit(HCI_CONN_LE_SMP_PEND, &hcon->pend)) {
- __cancel_delayed_work(&conn->security_timer);
+ cancel_delayed_work_sync(&conn->security_timer);
smp_chan_destroy(conn);
}
return c1;
}
-inline int l2cap_chan_connect(struct l2cap_chan *chan, __le16 psm, u16 cid, bdaddr_t *dst)
+int l2cap_chan_connect(struct l2cap_chan *chan, __le16 psm, u16 cid, bdaddr_t *dst)
{
struct sock *sk = chan->sk;
bdaddr_t *src = &bt_sk(sk)->src;
if ((conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_SENT) &&
cmd->ident == conn->info_ident) {
- __cancel_delayed_work(&conn->info_timer);
+ cancel_delayed_work(&conn->info_timer);
conn->info_state |= L2CAP_INFO_FEAT_MASK_REQ_DONE;
conn->info_ident = 0;
default:
sk->sk_err = ECONNRESET;
- __set_chan_timer(chan, L2CAP_DISC_REJ_TIMEOUT);
+ __set_chan_timer(chan,
+ msecs_to_jiffies(L2CAP_DISC_REJ_TIMEOUT));
l2cap_send_disconn_req(conn, chan, ECONNRESET);
goto done;
}
conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_DONE)
return 0;
- __cancel_delayed_work(&conn->info_timer);
+ cancel_delayed_work(&conn->info_timer);
if (result != L2CAP_IR_SUCCESS) {
conn->info_state |= L2CAP_INFO_FEAT_MASK_REQ_DONE;
if (encrypt == 0x00) {
if (chan->sec_level == BT_SECURITY_MEDIUM) {
__clear_chan_timer(chan);
- __set_chan_timer(chan, L2CAP_ENC_TIMEOUT);
+ __set_chan_timer(chan,
+ msecs_to_jiffies(L2CAP_ENC_TIMEOUT));
} else if (chan->sec_level == BT_SECURITY_HIGH)
l2cap_chan_close(chan, ECONNREFUSED);
} else {
if (hcon->type == LE_LINK) {
smp_distribute_keys(conn, 0);
- __cancel_delayed_work(&conn->security_timer);
+ cancel_delayed_work(&conn->security_timer);
}
rcu_read_lock();
L2CAP_CONN_REQ, sizeof(req), &req);
} else {
__clear_chan_timer(chan);
- __set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
+ __set_chan_timer(chan,
+ msecs_to_jiffies(L2CAP_DISC_TIMEOUT));
}
} else if (chan->state == BT_CONNECT2) {
struct l2cap_conn_rsp rsp;
}
} else {
l2cap_state_change(chan, BT_DISCONN);
- __set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
+ __set_chan_timer(chan,
+ msecs_to_jiffies(L2CAP_DISC_TIMEOUT));
res = L2CAP_CR_SEC_BLOCK;
stat = L2CAP_CS_NO_INFO;
}
if (!sk)
return NULL;
+ bt_sock_reclassify_lock(sk, BTPROTO_L2CAP);
+
l2cap_sock_init(sk, parent);
return l2cap_pi(sk)->chan;
INIT_LIST_HEAD(&bt_sk(sk)->accept_q);
sk->sk_destruct = l2cap_sock_destruct;
- sk->sk_sndtimeo = L2CAP_CONN_TIMEOUT;
+ sk->sk_sndtimeo = msecs_to_jiffies(L2CAP_CONN_TIMEOUT);
sock_reset_flag(sk, SOCK_ZAPPED);
break;
case BT_DISCONN:
- /* When socket is closed and we are not RFCOMM
- * initiator rfcomm_process_rx already calls
- * rfcomm_session_put() */
- if (s->sock->sk->sk_state != BT_CLOSED)
- if (list_empty(&s->dlcs))
- rfcomm_session_put(s);
+ /* rfcomm_session_put is called later so don't do
+ * anything here otherwise we will mess up the session
+ * reference counter:
+ *
+ * (a) when we are the initiator dlc_unlink will drive
+ * the reference counter to 0 (there is no initial put
+ * after session_add)
+ *
+ * (b) when we are not the initiator rfcomm_rx_process
+ * will explicitly call put to balance the initial hold
+ * done after session add.
+ */
break;
}
}
if (!sk)
goto done;
+ bt_sock_reclassify_lock(sk, BTPROTO_RFCOMM);
+
rfcomm_sock_init(sk, parent);
bacpy(&bt_sk(sk)->src, &src);
bacpy(&bt_sk(sk)->dst, &dst);
write_unlock_bh(&tbl->lock);
cond_resched();
write_lock_bh(&tbl->lock);
+ nht = rcu_dereference_protected(tbl->nht,
+ lockdep_is_held(&tbl->lock));
}
/* Cycle through all hash buckets every base_reachable_time/2 ticks.
* ARP entry timeouts range from 1/2 base_reachable_time to 3/2
poll_napi(dev);
- if (dev->priv_flags & IFF_SLAVE) {
+ if (dev->flags & IFF_SLAVE) {
if (dev->npinfo) {
struct net_device *bond_dev = dev->master;
struct sk_buff *skb;
};
static DEFINE_MUTEX(rtnl_mutex);
-static u16 min_ifinfo_dump_size;
void rtnl_lock(void)
{
}
/* All VF info */
-static inline int rtnl_vfinfo_size(const struct net_device *dev)
+static inline int rtnl_vfinfo_size(const struct net_device *dev,
+ u32 ext_filter_mask)
{
- if (dev->dev.parent && dev_is_pci(dev->dev.parent)) {
-
+ if (dev->dev.parent && dev_is_pci(dev->dev.parent) &&
+ (ext_filter_mask & RTEXT_FILTER_VF)) {
int num_vfs = dev_num_vf(dev->dev.parent);
size_t size = nla_total_size(sizeof(struct nlattr));
size += nla_total_size(num_vfs * sizeof(struct nlattr));
return port_self_size;
}
-static noinline size_t if_nlmsg_size(const struct net_device *dev)
+static noinline size_t if_nlmsg_size(const struct net_device *dev,
+ u32 ext_filter_mask)
{
return NLMSG_ALIGN(sizeof(struct ifinfomsg))
+ nla_total_size(IFNAMSIZ) /* IFLA_IFNAME */
+ nla_total_size(4) /* IFLA_MASTER */
+ nla_total_size(1) /* IFLA_OPERSTATE */
+ nla_total_size(1) /* IFLA_LINKMODE */
- + nla_total_size(4) /* IFLA_NUM_VF */
- + rtnl_vfinfo_size(dev) /* IFLA_VFINFO_LIST */
+ + nla_total_size(ext_filter_mask
+ & RTEXT_FILTER_VF ? 4 : 0) /* IFLA_NUM_VF */
+ + rtnl_vfinfo_size(dev, ext_filter_mask) /* IFLA_VFINFO_LIST */
+ rtnl_port_size(dev) /* IFLA_VF_PORTS + IFLA_PORT_SELF */
+ rtnl_link_get_size(dev) /* IFLA_LINKINFO */
+ rtnl_link_get_af_size(dev); /* IFLA_AF_SPEC */
static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev,
int type, u32 pid, u32 seq, u32 change,
- unsigned int flags)
+ unsigned int flags, u32 ext_filter_mask)
{
struct ifinfomsg *ifm;
struct nlmsghdr *nlh;
goto nla_put_failure;
copy_rtnl_link_stats64(nla_data(attr), stats);
- if (dev->dev.parent)
+ if (dev->dev.parent && (ext_filter_mask & RTEXT_FILTER_VF))
NLA_PUT_U32(skb, IFLA_NUM_VF, dev_num_vf(dev->dev.parent));
- if (dev->netdev_ops->ndo_get_vf_config && dev->dev.parent) {
+ if (dev->netdev_ops->ndo_get_vf_config && dev->dev.parent
+ && (ext_filter_mask & RTEXT_FILTER_VF)) {
int i;
struct nlattr *vfinfo, *vf;
struct net_device *dev;
struct hlist_head *head;
struct hlist_node *node;
+ struct nlattr *tb[IFLA_MAX+1];
+ u32 ext_filter_mask = 0;
s_h = cb->args[0];
s_idx = cb->args[1];
rcu_read_lock();
cb->seq = net->dev_base_seq;
+ nlmsg_parse(cb->nlh, sizeof(struct rtgenmsg), tb, IFLA_MAX,
+ ifla_policy);
+
+ if (tb[IFLA_EXT_MASK])
+ ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]);
+
for (h = s_h; h < NETDEV_HASHENTRIES; h++, s_idx = 0) {
idx = 0;
head = &net->dev_index_head[h];
if (rtnl_fill_ifinfo(skb, dev, RTM_NEWLINK,
NETLINK_CB(cb->skb).pid,
cb->nlh->nlmsg_seq, 0,
- NLM_F_MULTI) <= 0)
+ NLM_F_MULTI,
+ ext_filter_mask) <= 0)
goto out;
nl_dump_check_consistent(cb, nlmsg_hdr(skb));
[IFLA_VF_PORTS] = { .type = NLA_NESTED },
[IFLA_PORT_SELF] = { .type = NLA_NESTED },
[IFLA_AF_SPEC] = { .type = NLA_NESTED },
+ [IFLA_EXT_MASK] = { .type = NLA_U32 },
};
EXPORT_SYMBOL(ifla_policy);
if (send_addr_notify)
call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
- min_ifinfo_dump_size = max_t(u16, if_nlmsg_size(dev),
- min_ifinfo_dump_size);
return err;
}
struct net_device *dev = NULL;
struct sk_buff *nskb;
int err;
+ u32 ext_filter_mask = 0;
err = nlmsg_parse(nlh, sizeof(*ifm), tb, IFLA_MAX, ifla_policy);
if (err < 0)
if (tb[IFLA_IFNAME])
nla_strlcpy(ifname, tb[IFLA_IFNAME], IFNAMSIZ);
+ if (tb[IFLA_EXT_MASK])
+ ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]);
+
ifm = nlmsg_data(nlh);
if (ifm->ifi_index > 0)
dev = __dev_get_by_index(net, ifm->ifi_index);
if (dev == NULL)
return -ENODEV;
- nskb = nlmsg_new(if_nlmsg_size(dev), GFP_KERNEL);
+ nskb = nlmsg_new(if_nlmsg_size(dev, ext_filter_mask), GFP_KERNEL);
if (nskb == NULL)
return -ENOBUFS;
err = rtnl_fill_ifinfo(nskb, dev, RTM_NEWLINK, NETLINK_CB(skb).pid,
- nlh->nlmsg_seq, 0, 0);
+ nlh->nlmsg_seq, 0, 0, ext_filter_mask);
if (err < 0) {
/* -EMSGSIZE implies BUG in if_nlmsg_size */
WARN_ON(err == -EMSGSIZE);
return err;
}
-static u16 rtnl_calcit(struct sk_buff *skb)
+static u16 rtnl_calcit(struct sk_buff *skb, struct nlmsghdr *nlh)
{
+ struct net *net = sock_net(skb->sk);
+ struct net_device *dev;
+ struct nlattr *tb[IFLA_MAX+1];
+ u32 ext_filter_mask = 0;
+ u16 min_ifinfo_dump_size = 0;
+
+ nlmsg_parse(nlh, sizeof(struct rtgenmsg), tb, IFLA_MAX, ifla_policy);
+
+ if (tb[IFLA_EXT_MASK])
+ ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]);
+
+ if (!ext_filter_mask)
+ return NLMSG_GOODSIZE;
+ /*
+ * traverse the list of net devices and compute the minimum
+ * buffer size based upon the filter mask.
+ */
+ list_for_each_entry(dev, &net->dev_base_head, dev_list) {
+ min_ifinfo_dump_size = max_t(u16, min_ifinfo_dump_size,
+ if_nlmsg_size(dev,
+ ext_filter_mask));
+ }
+
return min_ifinfo_dump_size;
}
int err = -ENOBUFS;
size_t if_info_size;
- skb = nlmsg_new((if_info_size = if_nlmsg_size(dev)), GFP_KERNEL);
+ skb = nlmsg_new((if_info_size = if_nlmsg_size(dev, 0)), GFP_KERNEL);
if (skb == NULL)
goto errout;
- min_ifinfo_dump_size = max_t(u16, if_info_size, min_ifinfo_dump_size);
-
- err = rtnl_fill_ifinfo(skb, dev, type, 0, 0, change, 0);
+ err = rtnl_fill_ifinfo(skb, dev, type, 0, 0, change, 0, 0);
if (err < 0) {
/* -EMSGSIZE implies BUG in if_nlmsg_size() */
WARN_ON(err == -EMSGSIZE);
return -EOPNOTSUPP;
calcit = rtnl_get_calcit(family, type);
if (calcit)
- min_dump_alloc = calcit(skb);
+ min_dump_alloc = calcit(skb, nlh);
__rtnl_unlock();
rtnl = net->rtnl;
it is infeasible task. The most general solutions would be
to keep skb->encapsulation counter (sort of local ttl),
and silently drop packet when it expires. It is a good
- solution, but it supposes maintaing new variable in ALL
+ solution, but it supposes maintaining new variable in ALL
skb, even if no tunneling is used.
Current solution: xmit_recursion breaks dead loops. This is a percpu
One of them is to parse packet trying to detect inner encapsulation
made by our node. It is difficult or even impossible, especially,
- taking into account fragmentation. TO be short, tt is not solution at all.
+ taking into account fragmentation. TO be short, ttl is not solution at all.
Current solution: The solution was UNEXPECTEDLY SIMPLE.
We force DF flag on tunnels with preconfigured hop limit,
that is ALL. :-) Well, it does not remove the problem completely,
but exponential growth of network traffic is changed to linear
(branches, that exceed pmtu are pruned) and tunnel mtu
- fastly degrades to value <68, where looping stops.
+ rapidly degrades to value <68, where looping stops.
Yes, it is not good if there exists a router in the loop,
which does not force DF, even when encapsulating packets have DF set.
But it is not our problem! Nobody could accuse us, we made
GRE tunnels with enabled checksum. Tell them "thank you".
Well, I wonder, rfc1812 was written by Cisco employee,
- what the hell these idiots break standrads established
- by themself???
+ what the hell these idiots break standards established
+ by themselves???
*/
const struct iphdr *iph = (const struct iphdr *)skb->data;
pr_debug("ping_recvmsg(sk=%p,sk->num=%u)\n", isk, isk->inet_num);
+ err = -EOPNOTSUPP;
if (flags & MSG_OOB)
goto out;
{
struct sk_buff *skb = NULL;
unsigned long limit;
- int i, max_share, cnt;
+ int max_share, cnt;
+ unsigned int i;
unsigned long jiffy = jiffies;
BUILD_BUG_ON(sizeof(struct tcp_skb_cb) > sizeof(skb->cb));
&tcp_hashinfo.bhash_size,
NULL,
64 * 1024);
- tcp_hashinfo.bhash_size = 1 << tcp_hashinfo.bhash_size;
+ tcp_hashinfo.bhash_size = 1U << tcp_hashinfo.bhash_size;
for (i = 0; i < tcp_hashinfo.bhash_size; i++) {
spin_lock_init(&tcp_hashinfo.bhash[i].lock);
INIT_HLIST_HEAD(&tcp_hashinfo.bhash[i].chain);
return in_sack;
}
-static u8 tcp_sacktag_one(const struct sk_buff *skb, struct sock *sk,
- struct tcp_sacktag_state *state,
+/* Mark the given newly-SACKed range as such, adjusting counters and hints. */
+static u8 tcp_sacktag_one(struct sock *sk,
+ struct tcp_sacktag_state *state, u8 sacked,
+ u32 start_seq, u32 end_seq,
int dup_sack, int pcount)
{
struct tcp_sock *tp = tcp_sk(sk);
- u8 sacked = TCP_SKB_CB(skb)->sacked;
int fack_count = state->fack_count;
/* Account D-SACK for retransmitted packet. */
if (dup_sack && (sacked & TCPCB_RETRANS)) {
if (tp->undo_marker && tp->undo_retrans &&
- after(TCP_SKB_CB(skb)->end_seq, tp->undo_marker))
+ after(end_seq, tp->undo_marker))
tp->undo_retrans--;
if (sacked & TCPCB_SACKED_ACKED)
state->reord = min(fack_count, state->reord);
}
/* Nothing to do; acked frame is about to be dropped (was ACKed). */
- if (!after(TCP_SKB_CB(skb)->end_seq, tp->snd_una))
+ if (!after(end_seq, tp->snd_una))
return sacked;
if (!(sacked & TCPCB_SACKED_ACKED)) {
/* New sack for not retransmitted frame,
* which was in hole. It is reordering.
*/
- if (before(TCP_SKB_CB(skb)->seq,
+ if (before(start_seq,
tcp_highest_sack_seq(tp)))
state->reord = min(fack_count,
state->reord);
/* SACK enhanced F-RTO (RFC4138; Appendix B) */
- if (!after(TCP_SKB_CB(skb)->end_seq, tp->frto_highmark))
+ if (!after(end_seq, tp->frto_highmark))
state->flag |= FLAG_ONLY_ORIG_SACKED;
}
/* Lost marker hint past SACKed? Tweak RFC3517 cnt */
if (!tcp_is_fack(tp) && (tp->lost_skb_hint != NULL) &&
- before(TCP_SKB_CB(skb)->seq,
- TCP_SKB_CB(tp->lost_skb_hint)->seq))
+ before(start_seq, TCP_SKB_CB(tp->lost_skb_hint)->seq))
tp->lost_cnt_hint += pcount;
if (fack_count > tp->fackets_out)
return sacked;
}
+/* Shift newly-SACKed bytes from this skb to the immediately previous
+ * already-SACKed sk_buff. Mark the newly-SACKed bytes as such.
+ */
static int tcp_shifted_skb(struct sock *sk, struct sk_buff *skb,
struct tcp_sacktag_state *state,
unsigned int pcount, int shifted, int mss,
{
struct tcp_sock *tp = tcp_sk(sk);
struct sk_buff *prev = tcp_write_queue_prev(sk, skb);
+ u32 start_seq = TCP_SKB_CB(skb)->seq; /* start of newly-SACKed */
+ u32 end_seq = start_seq + shifted; /* end of newly-SACKed */
BUG_ON(!pcount);
- if (skb == tp->lost_skb_hint)
+ /* Adjust hint for FACK. Non-FACK is handled in tcp_sacktag_one(). */
+ if (tcp_is_fack(tp) && (skb == tp->lost_skb_hint))
tp->lost_cnt_hint += pcount;
TCP_SKB_CB(prev)->end_seq += shifted;
skb_shinfo(skb)->gso_type = 0;
}
- /* We discard results */
- tcp_sacktag_one(skb, sk, state, dup_sack, pcount);
+ /* Adjust counters and hints for the newly sacked sequence range but
+ * discard the return value since prev is already marked.
+ */
+ tcp_sacktag_one(sk, state, TCP_SKB_CB(skb)->sacked,
+ start_seq, end_seq, dup_sack, pcount);
/* Difference in this won't matter, both ACKed by the same cumul. ACK */
TCP_SKB_CB(prev)->sacked |= (TCP_SKB_CB(skb)->sacked & TCPCB_EVER_RETRANS);
break;
if (in_sack) {
- TCP_SKB_CB(skb)->sacked = tcp_sacktag_one(skb, sk,
- state,
- dup_sack,
- tcp_skb_pcount(skb));
+ TCP_SKB_CB(skb)->sacked =
+ tcp_sacktag_one(sk,
+ state,
+ TCP_SKB_CB(skb)->sacked,
+ TCP_SKB_CB(skb)->seq,
+ TCP_SKB_CB(skb)->end_seq,
+ dup_sack,
+ tcp_skb_pcount(skb));
if (!before(TCP_SKB_CB(skb)->seq,
tcp_highest_sack_seq(tp)))
skb_push(skb, sizeof(*iph));
skb_reset_network_header(skb);
-
- memmove(skb->data - skb->mac_len, skb_mac_header(skb),
- skb->mac_len);
- skb_set_mac_header(skb, -skb->mac_len);
+ skb_mac_header_rebuild(skb);
xfrm4_beet_make_header(skb);
static int xfrm4_mode_tunnel_input(struct xfrm_state *x, struct sk_buff *skb)
{
- const unsigned char *old_mac;
int err = -EINVAL;
if (XFRM_MODE_SKB_CB(skb)->protocol != IPPROTO_IPIP)
if (!(x->props.flags & XFRM_STATE_NOECN))
ipip_ecn_decapsulate(skb);
- old_mac = skb_mac_header(skb);
- skb_set_mac_header(skb, -skb->mac_len);
- memmove(skb_mac_header(skb), old_mac, skb->mac_len);
skb_reset_network_header(skb);
+ skb_mac_header_rebuild(skb);
+
err = 0;
out:
};
dst = ip6_route_output(net, NULL, &fl6);
- if (!dst)
+ if (dst->error) {
+ dst_release(dst);
goto out_free;
+ }
skb_dst_drop(skb);
skb_dst_set(skb, dst);
&saddr_buf, &ipv6_hdr(skb)->saddr, dev->ifindex);
dst = ip6_route_output(net, NULL, &fl6);
- if (dst == NULL)
+ if (dst->error) {
+ dst_release(dst);
return;
-
+ }
dst = xfrm_lookup(net, dst, flowi6_to_flowi(&fl6), NULL, 0);
if (IS_ERR(dst))
return;
static int xfrm6_beet_input(struct xfrm_state *x, struct sk_buff *skb)
{
struct ipv6hdr *ip6h;
- const unsigned char *old_mac;
int size = sizeof(struct ipv6hdr);
int err;
__skb_push(skb, size);
skb_reset_network_header(skb);
-
- old_mac = skb_mac_header(skb);
- skb_set_mac_header(skb, -skb->mac_len);
- memmove(skb_mac_header(skb), old_mac, skb->mac_len);
+ skb_mac_header_rebuild(skb);
xfrm6_beet_make_header(skb);
static int xfrm6_mode_tunnel_input(struct xfrm_state *x, struct sk_buff *skb)
{
int err = -EINVAL;
- const unsigned char *old_mac;
if (XFRM_MODE_SKB_CB(skb)->protocol != IPPROTO_IPV6)
goto out;
if (!(x->props.flags & XFRM_STATE_NOECN))
ipip6_ecn_decapsulate(skb);
- old_mac = skb_mac_header(skb);
- skb_set_mac_header(skb, -skb->mac_len);
- memmove(skb_mac_header(skb), old_mac, skb->mac_len);
skb_reset_network_header(skb);
+ skb_mac_header_rebuild(skb);
+
err = 0;
out:
test_sta_flag(sta, WLAN_STA_##flg) ? #flg "\n" : ""
int res = scnprintf(buf, sizeof(buf),
- "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
+ "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
TEST(AUTH), TEST(ASSOC), TEST(PS_STA),
TEST(PS_DRIVER), TEST(AUTHORIZED),
TEST(SHORT_PREAMBLE),
TEST(WME), TEST(WDS), TEST(CLEAR_PS_FILT),
TEST(MFP), TEST(BLOCK_BA), TEST(PSPOLL),
TEST(UAPSD), TEST(SP), TEST(TDLS_PEER),
- TEST(TDLS_PEER_AUTH));
+ TEST(TDLS_PEER_AUTH), TEST(RATE_CONTROL));
#undef TEST
return simple_read_from_buffer(userbuf, count, ppos, buf, res);
}
wiphy_debug(local->hw.wiphy, "Failed to initialize wep: %d\n",
result);
+ ieee80211_led_init(local);
+
rtnl_lock();
result = ieee80211_init_rate_ctrl_alg(local,
rtnl_unlock();
- ieee80211_led_init(local);
-
local->network_latency_notifier.notifier_call =
ieee80211_max_network_latency;
result = pm_qos_add_notifier(PM_QOS_NETWORK_LATENCY,
int i;
u32 mask;
- if (sta) {
+ if (sta && test_sta_flag(sta, WLAN_STA_RATE_CONTROL)) {
ista = &sta->sta;
priv_sta = sta->rate_ctrl_priv;
}
struct ieee80211_sta *ista = &sta->sta;
void *priv_sta = sta->rate_ctrl_priv;
- if (!ref)
+ if (!ref || !test_sta_flag(sta, WLAN_STA_RATE_CONTROL))
return;
ref->ops->tx_status(ref->priv, sband, ista, priv_sta, skb);
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
ref->ops->rate_init(ref->priv, sband, ista, priv_sta);
+ set_sta_flag(sta, WLAN_STA_RATE_CONTROL);
}
static inline void rate_control_rate_update(struct ieee80211_local *local,
* @WLAN_STA_SP: Station is in a service period, so don't try to
* reply to other uAPSD trigger frames or PS-Poll.
* @WLAN_STA_4ADDR_EVENT: 4-addr event was already sent for this frame.
+ * @WLAN_STA_RATE_CONTROL: rate control was initialized for this station.
*/
enum ieee80211_sta_info_flags {
WLAN_STA_AUTH,
WLAN_STA_UAPSD,
WLAN_STA_SP,
WLAN_STA_4ADDR_EVENT,
+ WLAN_STA_RATE_CONTROL,
};
enum ieee80211_sta_state {
__be16 dport = 0; /* destination port to forward */
unsigned int flags;
struct ip_vs_conn_param param;
+ const union nf_inet_addr fwmark = { .ip = htonl(svc->fwmark) };
union nf_inet_addr snet; /* source network of the client,
after masking */
{
int protocol = iph.protocol;
const union nf_inet_addr *vaddr = &iph.daddr;
- const union nf_inet_addr fwmark = { .ip = htonl(svc->fwmark) };
__be16 vport = 0;
if (dst_port == svc->port) {
&net->ct.hash[repl_hash]);
}
-void nf_conntrack_hash_insert(struct nf_conn *ct)
+int
+nf_conntrack_hash_check_insert(struct nf_conn *ct)
{
struct net *net = nf_ct_net(ct);
unsigned int hash, repl_hash;
+ struct nf_conntrack_tuple_hash *h;
+ struct hlist_nulls_node *n;
u16 zone;
zone = nf_ct_zone(ct);
- hash = hash_conntrack(net, zone, &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
- repl_hash = hash_conntrack(net, zone, &ct->tuplehash[IP_CT_DIR_REPLY].tuple);
+ hash = hash_conntrack(net, zone,
+ &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
+ repl_hash = hash_conntrack(net, zone,
+ &ct->tuplehash[IP_CT_DIR_REPLY].tuple);
+
+ spin_lock_bh(&nf_conntrack_lock);
+ /* See if there's one in the list already, including reverse */
+ hlist_nulls_for_each_entry(h, n, &net->ct.hash[hash], hnnode)
+ if (nf_ct_tuple_equal(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple,
+ &h->tuple) &&
+ zone == nf_ct_zone(nf_ct_tuplehash_to_ctrack(h)))
+ goto out;
+ hlist_nulls_for_each_entry(h, n, &net->ct.hash[repl_hash], hnnode)
+ if (nf_ct_tuple_equal(&ct->tuplehash[IP_CT_DIR_REPLY].tuple,
+ &h->tuple) &&
+ zone == nf_ct_zone(nf_ct_tuplehash_to_ctrack(h)))
+ goto out;
+
+ add_timer(&ct->timeout);
+ nf_conntrack_get(&ct->ct_general);
__nf_conntrack_hash_insert(ct, hash, repl_hash);
+ NF_CT_STAT_INC(net, insert);
+ spin_unlock_bh(&nf_conntrack_lock);
+
+ return 0;
+
+out:
+ NF_CT_STAT_INC(net, insert_failed);
+ spin_unlock_bh(&nf_conntrack_lock);
+ return -EEXIST;
}
-EXPORT_SYMBOL_GPL(nf_conntrack_hash_insert);
+EXPORT_SYMBOL_GPL(nf_conntrack_hash_check_insert);
/* Confirm a connection given skb; places it in hash table */
int
nf_ct_protonum(ct));
if (helper == NULL) {
rcu_read_unlock();
- spin_unlock_bh(&nf_conntrack_lock);
#ifdef CONFIG_MODULES
if (request_module("nfct-helper-%s", helpname) < 0) {
- spin_lock_bh(&nf_conntrack_lock);
err = -EOPNOTSUPP;
goto err1;
}
- spin_lock_bh(&nf_conntrack_lock);
rcu_read_lock();
helper = __nf_conntrack_helper_find(helpname,
nf_ct_l3num(ct),
if (tstamp)
tstamp->start = ktime_to_ns(ktime_get_real());
- add_timer(&ct->timeout);
- nf_conntrack_hash_insert(ct);
+ err = nf_conntrack_hash_check_insert(ct);
+ if (err < 0)
+ goto err2;
+
rcu_read_unlock();
return ct;
struct nf_conntrack_tuple otuple, rtuple;
struct nf_conntrack_tuple_hash *h = NULL;
struct nfgenmsg *nfmsg = nlmsg_data(nlh);
+ struct nf_conn *ct;
u_int8_t u3 = nfmsg->nfgen_family;
u16 zone;
int err;
return err;
}
- spin_lock_bh(&nf_conntrack_lock);
if (cda[CTA_TUPLE_ORIG])
- h = __nf_conntrack_find(net, zone, &otuple);
+ h = nf_conntrack_find_get(net, zone, &otuple);
else if (cda[CTA_TUPLE_REPLY])
- h = __nf_conntrack_find(net, zone, &rtuple);
+ h = nf_conntrack_find_get(net, zone, &rtuple);
if (h == NULL) {
err = -ENOENT;
if (nlh->nlmsg_flags & NLM_F_CREATE) {
- struct nf_conn *ct;
enum ip_conntrack_events events;
ct = ctnetlink_create_conntrack(net, zone, cda, &otuple,
&rtuple, u3);
- if (IS_ERR(ct)) {
- err = PTR_ERR(ct);
- goto out_unlock;
- }
+ if (IS_ERR(ct))
+ return PTR_ERR(ct);
+
err = 0;
- nf_conntrack_get(&ct->ct_general);
- spin_unlock_bh(&nf_conntrack_lock);
if (test_bit(IPS_EXPECTED_BIT, &ct->status))
events = IPCT_RELATED;
else
ct, NETLINK_CB(skb).pid,
nlmsg_report(nlh));
nf_ct_put(ct);
- } else
- spin_unlock_bh(&nf_conntrack_lock);
+ }
return err;
}
/* implicit 'else' */
- /* We manipulate the conntrack inside the global conntrack table lock,
- * so there's no need to increase the refcount */
err = -EEXIST;
+ ct = nf_ct_tuplehash_to_ctrack(h);
if (!(nlh->nlmsg_flags & NLM_F_EXCL)) {
- struct nf_conn *ct = nf_ct_tuplehash_to_ctrack(h);
-
+ spin_lock_bh(&nf_conntrack_lock);
err = ctnetlink_change_conntrack(ct, cda);
+ spin_unlock_bh(&nf_conntrack_lock);
if (err == 0) {
- nf_conntrack_get(&ct->ct_general);
- spin_unlock_bh(&nf_conntrack_lock);
nf_conntrack_eventmask_report((1 << IPCT_REPLY) |
(1 << IPCT_ASSURED) |
(1 << IPCT_HELPER) |
(1 << IPCT_MARK),
ct, NETLINK_CB(skb).pid,
nlmsg_report(nlh));
- nf_ct_put(ct);
- } else
- spin_unlock_bh(&nf_conntrack_lock);
-
- return err;
+ }
}
-out_unlock:
- spin_unlock_bh(&nf_conntrack_lock);
+ nf_ct_put(ct);
return err;
}
return status;
}
+#ifdef CONFIG_BRIDGE_NETFILTER
+/* When called from bridge netfilter, skb->data must point to MAC header
+ * before calling skb_gso_segment(). Else, original MAC header is lost
+ * and segmented skbs will be sent to wrong destination.
+ */
+static void nf_bridge_adjust_skb_data(struct sk_buff *skb)
+{
+ if (skb->nf_bridge)
+ __skb_push(skb, skb->network_header - skb->mac_header);
+}
+
+static void nf_bridge_adjust_segmented_data(struct sk_buff *skb)
+{
+ if (skb->nf_bridge)
+ __skb_pull(skb, skb->network_header - skb->mac_header);
+}
+#else
+#define nf_bridge_adjust_skb_data(s) do {} while (0)
+#define nf_bridge_adjust_segmented_data(s) do {} while (0)
+#endif
+
int nf_queue(struct sk_buff *skb,
struct list_head *elem,
u_int8_t pf, unsigned int hook,
unsigned int queuenum)
{
struct sk_buff *segs;
- int err;
+ int err = -EINVAL;
unsigned int queued;
if (!skb_is_gso(skb))
break;
}
+ nf_bridge_adjust_skb_data(skb);
segs = skb_gso_segment(skb, 0);
/* Does not use PTR_ERR to limit the number of error codes that can be
* returned by nf_queue. For instance, callers rely on -ECANCELED to mean
* 'ignore this hook'.
*/
if (IS_ERR(segs))
- return -EINVAL;
-
+ goto out_err;
queued = 0;
err = 0;
do {
struct sk_buff *nskb = segs->next;
segs->next = NULL;
- if (err == 0)
+ if (err == 0) {
+ nf_bridge_adjust_segmented_data(segs);
err = __nf_queue(segs, elem, pf, hook, indev,
outdev, okfn, queuenum);
+ }
if (err == 0)
queued++;
else
segs = nskb;
} while (segs);
- /* also free orig skb if only some segments were queued */
- if (unlikely(err && queued))
- err = 0;
- if (err == 0)
+ if (queued) {
kfree_skb(skb);
+ return 0;
+ }
+ out_err:
+ nf_bridge_adjust_segmented_data(skb);
return err;
}
fl6.flowlabel = ((iph->flow_lbl[0] & 0xF) << 16) |
(iph->flow_lbl[1] << 8) | iph->flow_lbl[2];
dst = ip6_route_output(net, NULL, &fl6);
- if (dst == NULL)
+ if (dst->error) {
+ dst_release(dst);
return false;
-
+ }
skb_dst_drop(skb);
skb_dst_set(skb, dst);
skb->dev = dst->dev;
if (toklen <= (n_parts + 1) * 4)
return -EINVAL;
- princ->name_parts = kcalloc(sizeof(char *), n_parts, GFP_KERNEL);
+ princ->name_parts = kcalloc(n_parts, sizeof(char *), GFP_KERNEL);
if (!princ->name_parts)
return -ENOMEM;
_debug("n_elem %d", n_elem);
- td = kcalloc(sizeof(struct krb5_tagged_data), n_elem,
+ td = kcalloc(n_elem, sizeof(struct krb5_tagged_data),
GFP_KERNEL);
if (!td)
return -ENOMEM;
/* if more time remaining? */
if (cb->time_to_send <= psched_get_time()) {
- skb = qdisc_dequeue_tail(sch);
- if (unlikely(!skb))
- goto qdisc_dequeue;
+ __skb_unlink(skb, &sch->q);
+ sch->qstats.backlog -= qdisc_pkt_len(skb);
#ifdef CONFIG_NET_CLS_ACT
/*
qdisc_watchdog_schedule(&q->watchdog, cb->time_to_send);
}
-qdisc_dequeue:
if (q->qdisc) {
skb = q->qdisc->ops->dequeue(q->qdisc);
if (skb)
# FLAGS="-ignore_unknown_options -very_quiet"
# OPTIONS=$*
- if [ "$KBUILD_EXTMOD" = "" ] ; then
- # Workaround for Coccinelle < 0.2.3
- FLAGS="-I $srctree/include -very_quiet"
- shift $(( $# - 1 ))
- OPTIONS=$1
- else
- echo M= is not currently supported when C=1 or C=2
- exit 1
- fi
+# Workaround for Coccinelle < 0.2.3
+ FLAGS="-I $srctree/include -very_quiet"
+ shift $(( $# - 1 ))
+ OPTIONS=$1
else
ONLINE=0
FLAGS="-very_quiet"
DEPMOD=$1
KERNELRELEASE=$2
-if ! "$DEPMOD" -V 2>/dev/null | grep -q module-init-tools; then
- echo "Warning: you may need to install module-init-tools" >&2
- echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt" >&2
- sleep 1
-fi
-
if ! test -r System.map -a -x "$DEPMOD"; then
exit 0
fi
void *function;
};
+#define ___cat(a,b) a ## b
+#define __cat(a,b) ___cat(a,b)
+
+/* we need some special handling for this host tool running eventually on
+ * Darwin. The Mach-O section handling is a bit different than ELF section
+ * handling. The differnces in detail are:
+ * a) we have segments which have sections
+ * b) we need a API call to get the respective section symbols */
+#if defined(__MACH__)
+#include <mach-o/getsect.h>
+
+#define INIT_SECTION(name) do { \
+ unsigned long name ## _len; \
+ char *__cat(pstart_,name) = getsectdata("__TEXT", \
+ #name, &__cat(name,_len)); \
+ char *__cat(pstop_,name) = __cat(pstart_,name) + \
+ __cat(name, _len); \
+ __cat(__start_,name) = (void *)__cat(pstart_,name); \
+ __cat(__stop_,name) = (void *)__cat(pstop_,name); \
+ } while (0)
+#define SECTION(name) __attribute__((section("__TEXT, " #name)))
+
+struct devtable **__start___devtable, **__stop___devtable;
+#else
+#define INIT_SECTION(name) /* no-op for ELF */
+#define SECTION(name) __attribute__((section(#name)))
+
/* We construct a table of pointers in an ELF section (pointers generally
* go unpadded by gcc). ld creates boundary syms for us. */
extern struct devtable *__start___devtable[], *__stop___devtable[];
-#define ___cat(a,b) a ## b
-#define __cat(a,b) ___cat(a,b)
+#endif /* __MACH__ */
#if __GNUC__ == 3 && __GNUC_MINOR__ < 3
# define __used __attribute__((__unused__))
(type *)NULL, \
(char *)NULL)), \
sizeof(type), (function) }; \
- static struct devtable *__attribute__((section("__devtable"))) \
- __used __cat(devtable_ptr,__LINE__) = &__cat(devtable,__LINE__)
+ static struct devtable *SECTION(__devtable) __used \
+ __cat(devtable_ptr,__LINE__) = &__cat(devtable,__LINE__)
#define ADD(str, sep, cond, field) \
do { \
do_pnp_card_entries(symval, sym->st_size, mod);
else {
struct devtable **p;
+ INIT_SECTION(__devtable);
for (p = __start___devtable; p < __stop___devtable; p++) {
if (sym_is(name, namelen, (*p)->device_id)) {
return 0;
}
+#ifndef R_ARM_CALL
+#define R_ARM_CALL 28
+#endif
+#ifndef R_ARM_JUMP24
+#define R_ARM_JUMP24 29
+#endif
+
static int addend_arm_rel(struct elf_info *elf, Elf_Shdr *sechdr, Elf_Rela *r)
{
unsigned int r_typ = ELF_R_TYPE(r->r_info);
(elf->symtab_start + ELF_R_SYM(r->r_info));
break;
case R_ARM_PC24:
+ case R_ARM_CALL:
+ case R_ARM_JUMP24:
/* From ARM ABI: ((S + A) | T) - P */
r->r_addend = (int)(long)(elf->hdr +
sechdr->sh_offset +
fi
# Build header package
-(cd $srctree; find . -name Makefile -o -name Kconfig\* -o -name \*.pl > /tmp/files$$)
-(cd $srctree; find arch/$SRCARCH/include include scripts -type f >> /tmp/files$$)
-(cd $objtree; find .config Module.symvers include scripts -type f >> /tmp/objfiles$$)
+(cd $srctree; find . -name Makefile -o -name Kconfig\* -o -name \*.pl > "$objtree/debian/hdrsrcfiles")
+(cd $srctree; find arch/$SRCARCH/include include scripts -type f >> "$objtree/debian/hdrsrcfiles")
+(cd $objtree; find .config Module.symvers include scripts -type f >> "$objtree/debian/hdrobjfiles")
destdir=$kernel_headers_dir/usr/src/linux-headers-$version
mkdir -p "$destdir"
-(cd $srctree; tar -c -f - -T /tmp/files$$) | (cd $destdir; tar -xf -)
-(cd $objtree; tar -c -f - -T /tmp/objfiles$$) | (cd $destdir; tar -xf -)
-rm -f /tmp/files$$ /tmp/objfiles$$
+(cd $srctree; tar -c -f - -T "$objtree/debian/hdrsrcfiles") | (cd $destdir; tar -xf -)
+(cd $objtree; tar -c -f - -T "$objtree/debian/hdrobjfiles") | (cd $destdir; tar -xf -)
+rm -f "$objtree/debian/hdrsrcfiles" "$objtree/debian/hdrobjfiles"
arch=$(dpkg --print-architecture)
cat <<EOF >> debian/control
err = snd_opl3_hwdep_new(opl3, 0, 1, NULL);
if (err < 0)
goto out_err;
+ opl3->private_data = chip;
}
- opl3->private_data = chip;
-
sprintf(card->longname, "%s at 0x%lx, irq %i",
card->shortname, chip->ctrl_io, chip->irq);
parm = ch ? AC_AMP_SET_RIGHT : AC_AMP_SET_LEFT;
parm |= direction == HDA_OUTPUT ? AC_AMP_SET_OUTPUT : AC_AMP_SET_INPUT;
parm |= index << AC_AMP_SET_INDEX_SHIFT;
- parm |= val;
+ if ((val & HDA_AMP_MUTE) && !(info->amp_caps & AC_AMPCAP_MUTE) &&
+ (info->amp_caps & AC_AMPCAP_MIN_MUTE))
+ ; /* set the zero value as a fake mute */
+ else
+ parm |= val;
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, parm);
info->vol[ch] = val;
}
val1 = -((caps & AC_AMPCAP_OFFSET) >> AC_AMPCAP_OFFSET_SHIFT);
val1 += ofs;
val1 = ((int)val1) * ((int)val2);
- if (min_mute)
+ if (min_mute || (caps & AC_AMPCAP_MIN_MUTE))
val2 |= TLV_DB_SCALE_MUTE;
if (put_user(SNDRV_CTL_TLVT_DB_SCALE, _tlv))
return -EFAULT;
const char *pfx = "", *sfx = "";
/* handle as a speaker if it's a fixed line-out */
- if (!strcmp(name, "Line-Out") && attr == INPUT_PIN_ATTR_INT)
+ if (!strcmp(name, "Line Out") && attr == INPUT_PIN_ATTR_INT)
name = "Speaker";
/* check the location */
switch (attr) {
switch (get_defcfg_device(def_conf)) {
case AC_JACK_LINE_OUT:
- return fill_audio_out_name(codec, nid, cfg, "Line-Out",
+ return fill_audio_out_name(codec, nid, cfg, "Line Out",
label, maxlen, indexp);
case AC_JACK_SPEAKER:
return fill_audio_out_name(codec, nid, cfg, "Speaker",
#define AC_AMPCAP_MUTE (1<<31) /* mute capable */
#define AC_AMPCAP_MUTE_SHIFT 31
+/* driver-specific amp-caps: using bits 24-30 */
+#define AC_AMPCAP_MIN_MUTE (1 << 30) /* min-volume = mute */
+
/* Connection list */
#define AC_CLIST_LENGTH (0x7f<<0)
#define AC_CLIST_LONG (1<<7)
"Front Speaker", "Surround Speaker", "Bass Speaker"
};
static const char * const line_outs[] = {
- "Front Line-Out", "Surround Line-Out", "Bass Line-Out"
+ "Front Line Out", "Surround Line Out", "Bass Line Out"
};
fix_volume_caps(codec, dac);
if (num_ctls > 1)
name = line_outs[idx];
else
- name = "Line-Out";
+ name = "Line Out";
break;
}
"Disabled", "Enabled"
};
static const char * const texts3[] = {
- "Disabled", "Speaker Only", "Line-Out+Speaker"
+ "Disabled", "Speaker Only", "Line Out+Speaker"
};
const char * const *texts;
err = snd_hda_ctl_add(codec, nid, kctl);
if (err < 0)
return err;
- if (!(query_amp_caps(codec, nid, hda_dir) & AC_AMPCAP_MUTE))
+ if (!(query_amp_caps(codec, nid, hda_dir) &
+ (AC_AMPCAP_MUTE | AC_AMPCAP_MIN_MUTE)))
break;
}
return 0;
{}
};
+/* add "fake" mute amp-caps to DACs on cx5051 so that mixer mute switches
+ * can be created (bko#42825)
+ */
+static void add_cx5051_fake_mutes(struct hda_codec *codec)
+{
+ static hda_nid_t out_nids[] = {
+ 0x10, 0x11, 0
+ };
+ hda_nid_t *p;
+
+ for (p = out_nids; *p; p++)
+ snd_hda_override_amp_caps(codec, *p, HDA_OUTPUT,
+ AC_AMPCAP_MIN_MUTE |
+ query_amp_caps(codec, *p, HDA_OUTPUT));
+}
+
static int patch_conexant_auto(struct hda_codec *codec)
{
struct conexant_spec *spec;
case 0x14f15045:
spec->single_adc_amp = 1;
break;
+ case 0x14f15051:
+ add_cx5051_fake_mutes(codec);
+ break;
}
apply_pin_fixup(codec, cxt_fixups, cxt_pincfg_tbl);
ALC_AUTOMUTE_MIXER, /* mute/unmute mixer widget AMP */
};
+#define MAX_VOL_NIDS 0x40
+
struct alc_spec {
/* codec parameterization */
const struct snd_kcontrol_new *mixers[5]; /* mixer arrays */
const hda_nid_t *capsrc_nids;
hda_nid_t dig_in_nid; /* digital-in NID; optional */
hda_nid_t mixer_nid; /* analog-mixer NID */
- DECLARE_BITMAP(vol_ctls, 0x20 << 1);
- DECLARE_BITMAP(sw_ctls, 0x20 << 1);
+ DECLARE_BITMAP(vol_ctls, MAX_VOL_NIDS << 1);
+ DECLARE_BITMAP(sw_ctls, MAX_VOL_NIDS << 1);
/* capture setup for dynamic dual-adc switch */
hda_nid_t cur_adc;
"Disabled", "Enabled"
};
static const char * const texts3[] = {
- "Disabled", "Speaker Only", "Line-Out+Speaker"
+ "Disabled", "Speaker Only", "Line Out+Speaker"
};
const char * const *texts;
"Headphone Playback Volume",
"Speaker Playback Volume",
"Mono Playback Volume",
- "Line-Out Playback Volume",
+ "Line Out Playback Volume",
"CLFE Playback Volume",
"Bass Speaker Playback Volume",
"PCM Playback Volume",
"Speaker Playback Switch",
"Mono Playback Switch",
"IEC958 Playback Switch",
- "Line-Out Playback Switch",
+ "Line Out Playback Switch",
"CLFE Playback Switch",
"Bass Speaker Playback Switch",
"PCM Playback Switch",
static inline unsigned int get_ctl_pos(unsigned int data)
{
hda_nid_t nid = get_amp_nid_(data);
- unsigned int dir = get_amp_direction_(data);
+ unsigned int dir;
+ if (snd_BUG_ON(nid >= MAX_VOL_NIDS))
+ return 0;
+ dir = get_amp_direction_(data);
return (nid << 1) | dir;
}
else
nums = spec->num_adc_nids;
for (c = 0; c < nums; c++)
- alc_mux_select(codec, 0, spec->cur_mux[c], true);
+ alc_mux_select(codec, c, spec->cur_mux[c], true);
}
/* add mic boosts if needed */
const struct alc_fixup *fix, int action)
{
if (action == ALC_FIXUP_ACT_PRE_PROBE) {
+ /* fake the connections during parsing the tree */
hda_nid_t conn1[2] = { 0x0c, 0x0d };
hda_nid_t conn2[2] = { 0x0e, 0x0f };
snd_hda_override_conn_list(codec, 0x14, 2, conn1);
snd_hda_override_conn_list(codec, 0x15, 2, conn1);
snd_hda_override_conn_list(codec, 0x18, 2, conn2);
snd_hda_override_conn_list(codec, 0x1a, 2, conn2);
+ } else if (action == ALC_FIXUP_ACT_PROBE) {
+ /* restore the connections */
+ hda_nid_t conn[5] = { 0x0c, 0x0d, 0x0e, 0x0f, 0x26 };
+ snd_hda_override_conn_list(codec, 0x14, 5, conn);
+ snd_hda_override_conn_list(codec, 0x15, 5, conn);
+ snd_hda_override_conn_list(codec, 0x18, 5, conn);
+ snd_hda_override_conn_list(codec, 0x1a, 5, conn);
}
}
unsigned int val = AC_PINCTL_OUT_EN | AC_PINCTL_HP_EN;
if (no_hp_sensing(spec, i))
continue;
- if (presence)
+ if (1 /*presence*/)
stac92xx_set_pinctl(codec, cfg->hp_pins[i], val);
#if 0 /* FIXME */
/* Resetting the pinctl like below may lead to (a sort of) regressions
SOC_DOUBLE_R_TLV("Digital Playback Volume", L_DVC, R_DVC,
0, 0xFF, 1, out_tlv),
-
- SOC_SINGLE("Headphone Switch", PW_MGMT2, 6, 1, 0),
};
-static const struct snd_kcontrol_new ak4642_hpout_mixer_controls[] = {
- SOC_DAPM_SINGLE("DACH", MD_CTL4, 0, 1, 0),
-};
+static const struct snd_kcontrol_new ak4642_headphone_control =
+ SOC_DAPM_SINGLE("Switch", PW_MGMT2, 6, 1, 0);
static const struct snd_kcontrol_new ak4642_lout_mixer_controls[] = {
SOC_DAPM_SINGLE("DACL", SG_SL1, 4, 1, 0),
SND_SOC_DAPM_OUTPUT("HPOUTR"),
SND_SOC_DAPM_OUTPUT("LINEOUT"),
- SND_SOC_DAPM_MIXER("HPOUTL Mixer", PW_MGMT2, 5, 0,
- &ak4642_hpout_mixer_controls[0],
- ARRAY_SIZE(ak4642_hpout_mixer_controls)),
+ SND_SOC_DAPM_PGA("HPL Out", PW_MGMT2, 5, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("HPR Out", PW_MGMT2, 4, 0, NULL, 0),
+ SND_SOC_DAPM_SWITCH("Headphone Enable", SND_SOC_NOPM, 0, 0,
+ &ak4642_headphone_control),
- SND_SOC_DAPM_MIXER("HPOUTR Mixer", PW_MGMT2, 4, 0,
- &ak4642_hpout_mixer_controls[0],
- ARRAY_SIZE(ak4642_hpout_mixer_controls)),
+ SND_SOC_DAPM_PGA("DACH", MD_CTL4, 0, 0, NULL, 0),
SND_SOC_DAPM_MIXER("LINEOUT Mixer", PW_MGMT1, 3, 0,
&ak4642_lout_mixer_controls[0],
static const struct snd_soc_dapm_route ak4642_intercon[] = {
/* Outputs */
- {"HPOUTL", NULL, "HPOUTL Mixer"},
- {"HPOUTR", NULL, "HPOUTR Mixer"},
+ {"HPOUTL", NULL, "HPL Out"},
+ {"HPOUTR", NULL, "HPR Out"},
{"LINEOUT", NULL, "LINEOUT Mixer"},
- {"HPOUTL Mixer", "DACH", "DAC"},
- {"HPOUTR Mixer", "DACH", "DAC"},
+ {"HPL Out", NULL, "Headphone Enable"},
+ {"HPR Out", NULL, "Headphone Enable"},
+
+ {"Headphone Enable", "Switch", "DACH"},
+
+ {"DACH", NULL, "DAC"},
+
{"LINEOUT Mixer", "DACL", "DAC"},
};
return 0;
}
-static const char *st_text[] = { "None", "Right", "Left" };
+static const char *st_text[] = { "None", "Left", "Right" };
static const struct soc_enum str_enum =
SOC_ENUM_SINGLE(WM8962_DAC_DSP_MIXING_1, 2, 3, st_text);
break;
case SND_SOC_DAIFMT_DSP_A:
/* data on rising edge of bclk, frame high 1clk before data */
- strcr |= SSI_STCR_TFSL | SSI_STCR_TEFS;
+ strcr |= SSI_STCR_TFSL | SSI_STCR_TXBIT0 | SSI_STCR_TEFS;
break;
}
* standby.
*/
if (powerdown) {
- snd_soc_dapm_set_bias_level(dapm, SND_SOC_BIAS_PREPARE);
+ if (dapm->bias_level == SND_SOC_BIAS_ON)
+ snd_soc_dapm_set_bias_level(dapm,
+ SND_SOC_BIAS_PREPARE);
dapm_seq_run(dapm, &down_list, 0, false);
- snd_soc_dapm_set_bias_level(dapm, SND_SOC_BIAS_STANDBY);
+ if (dapm->bias_level == SND_SOC_BIAS_PREPARE)
+ snd_soc_dapm_set_bias_level(dapm,
+ SND_SOC_BIAS_STANDBY);
}
}
list_for_each_entry(codec, &card->codec_dev_list, list) {
soc_dapm_shutdown_codec(&codec->dapm);
- snd_soc_dapm_set_bias_level(&codec->dapm, SND_SOC_BIAS_OFF);
+ if (codec->dapm.bias_level == SND_SOC_BIAS_STANDBY)
+ snd_soc_dapm_set_bias_level(&codec->dapm,
+ SND_SOC_BIAS_OFF);
}
}
spin_lock(&dev->spinlock);
- if (dev->input_panic || dev->output_panic)
+ if (dev->input_panic || dev->output_panic) {
ptr = SNDRV_PCM_POS_XRUN;
+ goto unlock;
+ }
if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK)
ptr = bytes_to_frames(sub->runtime,
ptr = bytes_to_frames(sub->runtime,
dev->audio_in_buf_pos[index]);
+unlock:
spin_unlock(&dev->spinlock);
return ptr;
}
#ifndef __USBAUDIO_CARD_H
#define __USBAUDIO_CARD_H
+#define MAX_NR_RATES 1024
#define MAX_PACKS 20
#define MAX_PACKS_HS (MAX_PACKS * 8) /* in high speed mode */
#define MAX_URBS 8
return 0;
}
-#define MAX_UAC2_NR_RATES 1024
-
/*
* Helper function to walk the array of sample rate triplets reported by
* the device. The problem is that we need to parse whole array first to
fp->rates |= snd_pcm_rate_to_rate_bit(rate);
nr_rates++;
- if (nr_rates >= MAX_UAC2_NR_RATES) {
+ if (nr_rates >= MAX_NR_RATES) {
snd_printk(KERN_ERR "invalid uac2 rates\n");
break;
}
unsigned *rate_table = NULL;
fp = kmemdup(quirk->data, sizeof(*fp), GFP_KERNEL);
- if (! fp) {
+ if (!fp) {
snd_printk(KERN_ERR "cannot memdup\n");
return -ENOMEM;
}
+ if (fp->nr_rates > MAX_NR_RATES) {
+ kfree(fp);
+ return -EINVAL;
+ }
if (fp->nr_rates > 0) {
rate_table = kmemdup(fp->rate_table,
sizeof(int) * fp->nr_rates, GFP_KERNEL);
if (size >= len)
size = len - 1;
memcpy(comm, name, size);
+ comm[size] = '\0';
} else if (memcmp(bf, "Tgid:", 5) == 0) {
char *tgids = bf + 5;
hlist_for_each_entry(sid, pos, head, node)
if (sid->id == id)
return sid->evsel;
+
+ if (!perf_evlist__sample_id_all(evlist))
+ return list_entry(evlist->entries.next, struct perf_evsel, node);
+
return NULL;
}
tev->point.symbol);
ret = -ENOENT;
goto error;
+ } else if (tev->point.offset > sym->end - sym->start) {
+ pr_warning("Offset specified is greater than size of %s\n",
+ tev->point.symbol);
+ ret = -ENOENT;
+ goto error;
+
}
return 1;
static int convert_to_trace_point(Dwarf_Die *sp_die, Dwarf_Addr paddr,
bool retprobe, struct probe_trace_point *tp)
{
- Dwarf_Addr eaddr;
+ Dwarf_Addr eaddr, highaddr;
const char *name;
/* Copy the name of probe point */
dwarf_diename(sp_die));
return -ENOENT;
}
+ if (dwarf_highpc(sp_die, &highaddr) != 0) {
+ pr_warning("Failed to get end address of %s\n",
+ dwarf_diename(sp_die));
+ return -ENOENT;
+ }
+ if (paddr > highaddr) {
+ pr_warning("Offset specified is greater than size of %s\n",
+ dwarf_diename(sp_die));
+ return -EINVAL;
+ }
tp->symbol = strdup(name);
if (tp->symbol == NULL)
return -ENOMEM;
$in_bisect = 1;
my $failed = 0;
- build "oldconfig";
- start_monitor_and_boot or $failed = 1;
- end_monitor;
+ build "oldconfig" or $failed = 1;
+ if (!$failed) {
+ start_monitor_and_boot or $failed = 1;
+ end_monitor;
+ }
$in_bisect = 0;