atmel_tc library
authorDavid Brownell <david-b@pacbell.net>
Sat, 23 Feb 2008 01:23:23 +0000 (17:23 -0800)
committerHaavard Skinnemoen <hskinnemoen@atmel.com>
Tue, 4 Mar 2008 12:41:23 +0000 (13:41 +0100)
Create <linux/atmel_tc.h> based on <asm-arm/arch-at91/at91-tc.h> and the
at91sam9263 and at32ap7000 datasheets.  Most AT91 and AT32 SOCs have one
or two of these TC blocks, which include three 16-bit timers that can be
interconnected in various ways.

These TC blocks can be used for external interfacing (such as PWM and
measurement), or used as somewhat quirky sixteen-bit timers.

Changes relative to the original version:
  * Drop unneeded inclusion of <linux/mutex.h>
  * Support an arbitrary number of TC blocks
  * Return a struct with information about a TC block from
    atmel_tc_alloc() instead of using a combination of return values
    and "out" parameters.
  * ioremap() the I/O registers on allocation
  * Look up clocks and irqs for all channels
  * Add "name" parameter to atmel_tc_alloc() and use this when
    requesting the iomem resource.
  * Check if the platform provided the necessary resources at probe()
    time instead of when the TCB is allocated.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
drivers/misc/Kconfig
drivers/misc/Makefile
drivers/misc/atmel_tclib.c [new file with mode: 0644]
include/linux/atmel_tc.h [new file with mode: 0644]

index 982e27b..b3ba681 100644 (file)
@@ -22,6 +22,14 @@ config ATMEL_PWM
          purposes including software controlled power-efficent backlights
          on LCD displays, motor control, and waveform generation.
 
+config ATMEL_TCLIB
+       bool "Atmel AT32/AT91 Timer/Counter Library"
+       depends on (AVR32 || ARCH_AT91)
+       help
+         Select this if you want a library to allocate the Timer/Counter
+         blocks found on many Atmel processors.  This facilitates using
+         these blocks by different drivers despite processor differences.
+
 config IBM_ASM
        tristate "Device driver for IBM RSA service processor"
        depends on X86 && PCI && INPUT && EXPERIMENTAL
index 3b12f5d..c975028 100644 (file)
@@ -10,6 +10,7 @@ obj-$(CONFIG_ACER_WMI)     += acer-wmi.o
 obj-$(CONFIG_ASUS_LAPTOP)     += asus-laptop.o
 obj-$(CONFIG_ATMEL_PWM)                += atmel_pwm.o
 obj-$(CONFIG_ATMEL_SSC)                += atmel-ssc.o
+obj-$(CONFIG_ATMEL_TCLIB)      += atmel_tclib.o
 obj-$(CONFIG_TC1100_WMI)       += tc1100-wmi.o
 obj-$(CONFIG_LKDTM)            += lkdtm.o
 obj-$(CONFIG_TIFM_CORE)        += tifm_core.o
diff --git a/drivers/misc/atmel_tclib.c b/drivers/misc/atmel_tclib.c
new file mode 100644 (file)
index 0000000..05dc8a3
--- /dev/null
@@ -0,0 +1,161 @@
+#include <linux/atmel_tc.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+/* Number of bytes to reserve for the iomem resource */
+#define ATMEL_TC_IOMEM_SIZE    256
+
+
+/*
+ * This is a thin library to solve the problem of how to portably allocate
+ * one of the TC blocks.  For simplicity, it doesn't currently expect to
+ * share individual timers between different drivers.
+ */
+
+#if defined(CONFIG_AVR32)
+/* AVR32 has these divide PBB */
+const u8 atmel_tc_divisors[5] = { 0, 4, 8, 16, 32, };
+EXPORT_SYMBOL(atmel_tc_divisors);
+
+#elif defined(CONFIG_ARCH_AT91)
+/* AT91 has these divide MCK */
+const u8 atmel_tc_divisors[5] = { 2, 8, 32, 128, 0, };
+EXPORT_SYMBOL(atmel_tc_divisors);
+
+#endif
+
+static DEFINE_SPINLOCK(tc_list_lock);
+static LIST_HEAD(tc_list);
+
+/**
+ * atmel_tc_alloc - allocate a specified TC block
+ * @block: which block to allocate
+ * @name: name to be associated with the iomem resource
+ *
+ * Caller allocates a block.  If it is available, a pointer to a
+ * pre-initialized struct atmel_tc is returned. The caller can access
+ * the registers directly through the "regs" field.
+ */
+struct atmel_tc *atmel_tc_alloc(unsigned block, const char *name)
+{
+       struct atmel_tc         *tc;
+       struct platform_device  *pdev = NULL;
+       struct resource         *r;
+
+       spin_lock(&tc_list_lock);
+       list_for_each_entry(tc, &tc_list, node) {
+               if (tc->pdev->id == block) {
+                       pdev = tc->pdev;
+                       break;
+               }
+       }
+
+       if (!pdev || tc->iomem)
+               goto fail;
+
+       r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       r = request_mem_region(r->start, ATMEL_TC_IOMEM_SIZE, name);
+       if (!r)
+               goto fail;
+
+       tc->regs = ioremap(r->start, ATMEL_TC_IOMEM_SIZE);
+       if (!tc->regs)
+               goto fail_ioremap;
+
+       tc->iomem = r;
+
+out:
+       spin_unlock(&tc_list_lock);
+       return tc;
+
+fail_ioremap:
+       release_resource(r);
+fail:
+       tc = NULL;
+       goto out;
+}
+EXPORT_SYMBOL_GPL(atmel_tc_alloc);
+
+/**
+ * atmel_tc_free - release a specified TC block
+ * @tc: Timer/counter block that was returned by atmel_tc_alloc()
+ *
+ * This reverses the effect of atmel_tc_alloc(), unmapping the I/O
+ * registers, invalidating the resource returned by that routine and
+ * making the TC available to other drivers.
+ */
+void atmel_tc_free(struct atmel_tc *tc)
+{
+       spin_lock(&tc_list_lock);
+       if (tc->regs) {
+               iounmap(tc->regs);
+               release_resource(tc->iomem);
+               tc->regs = NULL;
+               tc->iomem = NULL;
+       }
+       spin_unlock(&tc_list_lock);
+}
+EXPORT_SYMBOL_GPL(atmel_tc_free);
+
+static int __init tc_probe(struct platform_device *pdev)
+{
+       struct atmel_tc *tc;
+       struct clk      *clk;
+       int             irq;
+
+       if (!platform_get_resource(pdev, IORESOURCE_MEM, 0))
+               return -EINVAL;
+
+       irq = platform_get_irq(pdev, 0);
+       if (irq < 0)
+               return -EINVAL;
+
+       tc = kzalloc(sizeof(struct atmel_tc), GFP_KERNEL);
+       if (!tc)
+               return -ENOMEM;
+
+       tc->pdev = pdev;
+
+       clk = clk_get(&pdev->dev, "t0_clk");
+       if (IS_ERR(clk)) {
+               kfree(tc);
+               return -EINVAL;
+       }
+
+       tc->clk[0] = clk;
+       tc->clk[1] = clk_get(&pdev->dev, "t1_clk");
+       if (IS_ERR(tc->clk[1]))
+               tc->clk[1] = clk;
+       tc->clk[2] = clk_get(&pdev->dev, "t2_clk");
+       if (IS_ERR(tc->clk[2]))
+               tc->clk[2] = clk;
+
+       tc->irq[0] = irq;
+       tc->irq[1] = platform_get_irq(pdev, 1);
+       if (tc->irq[1] < 0)
+               tc->irq[1] = irq;
+       tc->irq[2] = platform_get_irq(pdev, 2);
+       if (tc->irq[2] < 0)
+               tc->irq[2] = irq;
+
+       spin_lock(&tc_list_lock);
+       list_add_tail(&tc->node, &tc_list);
+       spin_unlock(&tc_list_lock);
+
+       return 0;
+}
+
+static struct platform_driver tc_driver = {
+       .driver.name    = "atmel_tcb",
+};
+
+static int __init tc_init(void)
+{
+       return platform_driver_probe(&tc_driver, tc_probe);
+}
+arch_initcall(tc_init);
diff --git a/include/linux/atmel_tc.h b/include/linux/atmel_tc.h
new file mode 100644 (file)
index 0000000..53ba65e
--- /dev/null
@@ -0,0 +1,252 @@
+/*
+ * Timer/Counter Unit (TC) registers.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef ATMEL_TC_H
+#define ATMEL_TC_H
+
+#include <linux/compiler.h>
+#include <linux/list.h>
+
+/*
+ * Many 32-bit Atmel SOCs include one or more TC blocks, each of which holds
+ * three general-purpose 16-bit timers.  These timers share one register bank.
+ * Depending on the SOC, each timer may have its own clock and IRQ, or those
+ * may be shared by the whole TC block.
+ *
+ * These TC blocks may have up to nine external pins:  TCLK0..2 signals for
+ * clocks or clock gates, and per-timer TIOA and TIOB signals used for PWM
+ * or triggering.  Those pins need to be set up for use with the TC block,
+ * else they will be used as GPIOs or for a different controller.
+ *
+ * Although we expect each TC block to have a platform_device node, those
+ * nodes are not what drivers bind to.  Instead, they ask for a specific
+ * TC block, by number ... which is a common approach on systems with many
+ * timers.  Then they use clk_get() and platform_get_irq() to get clock and
+ * IRQ resources.
+ */
+
+struct clk;
+
+/**
+ * struct atmel_tc - information about a Timer/Counter Block
+ * @pdev: physical device
+ * @iomem: resource associated with the I/O register
+ * @regs: mapping through which the I/O registers can be accessed
+ * @irq: irq for each of the three channels
+ * @clk: internal clock source for each of the three channels
+ * @node: list node, for tclib internal use
+ *
+ * On some platforms, each TC channel has its own clocks and IRQs,
+ * while on others, all TC channels share the same clock and IRQ.
+ * Drivers should clk_enable() all the clocks they need even though
+ * all the entries in @clk may point to the same physical clock.
+ * Likewise, drivers should request irqs independently for each
+ * channel, but they must use IRQF_SHARED in case some of the entries
+ * in @irq are actually the same IRQ.
+ */
+struct atmel_tc {
+       struct platform_device  *pdev;
+       struct resource         *iomem;
+       void __iomem            *regs;
+       int                     irq[3];
+       struct clk              *clk[3];
+       struct list_head        node;
+};
+
+extern struct atmel_tc *atmel_tc_alloc(unsigned block, const char *name);
+extern void atmel_tc_free(struct atmel_tc *tc);
+
+/* platform-specific ATMEL_TC_TIMER_CLOCKx divisors (0 means 32KiHz) */
+extern const u8 atmel_tc_divisors[5];
+
+
+/*
+ * Two registers have block-wide controls.  These are: configuring the three
+ * "external" clocks (or event sources) used by the timer channels; and
+ * synchronizing the timers by resetting them all at once.
+ *
+ * "External" can mean "external to chip" using the TCLK0, TCLK1, or TCLK2
+ * signals.  Or, it can mean "external to timer", using the TIOA output from
+ * one of the other two timers that's being run in waveform mode.
+ */
+
+#define ATMEL_TC_BCR   0xc0            /* TC Block Control Register */
+#define     ATMEL_TC_SYNC      (1 << 0)        /* synchronize timers */
+
+#define ATMEL_TC_BMR   0xc4            /* TC Block Mode Register */
+#define     ATMEL_TC_TC0XC0S   (3 << 0)        /* external clock 0 source */
+#define        ATMEL_TC_TC0XC0S_TCLK0  (0 << 0)
+#define        ATMEL_TC_TC0XC0S_NONE   (1 << 0)
+#define        ATMEL_TC_TC0XC0S_TIOA1  (2 << 0)
+#define        ATMEL_TC_TC0XC0S_TIOA2  (3 << 0)
+#define     ATMEL_TC_TC1XC1S   (3 << 2)        /* external clock 1 source */
+#define        ATMEL_TC_TC1XC1S_TCLK1  (0 << 2)
+#define        ATMEL_TC_TC1XC1S_NONE   (1 << 2)
+#define        ATMEL_TC_TC1XC1S_TIOA0  (2 << 2)
+#define        ATMEL_TC_TC1XC1S_TIOA2  (3 << 2)
+#define     ATMEL_TC_TC2XC2S   (3 << 4)        /* external clock 2 source */
+#define        ATMEL_TC_TC2XC2S_TCLK2  (0 << 4)
+#define        ATMEL_TC_TC2XC2S_NONE   (1 << 4)
+#define        ATMEL_TC_TC2XC2S_TIOA0  (2 << 4)
+#define        ATMEL_TC_TC2XC2S_TIOA1  (3 << 4)
+
+
+/*
+ * Each TC block has three "channels", each with one counter and controls.
+ *
+ * Note that the semantics of ATMEL_TC_TIMER_CLOCKx (input clock selection
+ * when it's not "external") is silicon-specific.  AT91 platforms use one
+ * set of definitions; AVR32 platforms use a different set.  Don't hard-wire
+ * such knowledge into your code, use the global "atmel_tc_divisors" ...
+ * where index N is the divisor for clock N+1, else zero to indicate it uses
+ * the 32 KiHz clock.
+ *
+ * The timers can be chained in various ways, and operated in "waveform"
+ * generation mode (including PWM) or "capture" mode (to time events).  In
+ * both modes, behavior can be configured in many ways.
+ *
+ * Each timer has two I/O pins, TIOA and TIOB.  Waveform mode uses TIOA as a
+ * PWM output, and TIOB as either another PWM or as a trigger.  Capture mode
+ * uses them only as inputs.
+ */
+#define ATMEL_TC_CHAN(idx)     ((idx)*0x40)
+#define ATMEL_TC_REG(idx, reg) (ATMEL_TC_CHAN(idx) + ATMEL_TC_ ## reg)
+
+#define ATMEL_TC_CCR   0x00            /* Channel Control Register */
+#define     ATMEL_TC_CLKEN     (1 << 0)        /* clock enable */
+#define     ATMEL_TC_CLKDIS    (1 << 1)        /* clock disable */
+#define     ATMEL_TC_SWTRG     (1 << 2)        /* software trigger */
+
+#define ATMEL_TC_CMR   0x04            /* Channel Mode Register */
+
+/* Both modes share some CMR bits */
+#define     ATMEL_TC_TCCLKS    (7 << 0)        /* clock source */
+#define        ATMEL_TC_TIMER_CLOCK1   (0 << 0)
+#define        ATMEL_TC_TIMER_CLOCK2   (1 << 0)
+#define        ATMEL_TC_TIMER_CLOCK3   (2 << 0)
+#define        ATMEL_TC_TIMER_CLOCK4   (3 << 0)
+#define        ATMEL_TC_TIMER_CLOCK5   (4 << 0)
+#define        ATMEL_TC_XC0            (5 << 0)
+#define        ATMEL_TC_XC1            (6 << 0)
+#define        ATMEL_TC_XC2            (7 << 0)
+#define     ATMEL_TC_CLKI      (1 << 3)        /* clock invert */
+#define     ATMEL_TC_BURST     (3 << 4)        /* clock gating */
+#define        ATMEL_TC_GATE_NONE      (0 << 4)
+#define        ATMEL_TC_GATE_XC0       (1 << 4)
+#define        ATMEL_TC_GATE_XC1       (2 << 4)
+#define        ATMEL_TC_GATE_XC2       (3 << 4)
+#define     ATMEL_TC_WAVE      (1 << 15)       /* true = Waveform mode */
+
+/* CAPTURE mode CMR bits */
+#define     ATMEL_TC_LDBSTOP   (1 << 6)        /* counter stops on RB load */
+#define     ATMEL_TC_LDBDIS    (1 << 7)        /* counter disable on RB load */
+#define     ATMEL_TC_ETRGEDG   (3 << 8)        /* external trigger edge */
+#define        ATMEL_TC_ETRGEDG_NONE   (0 << 8)
+#define        ATMEL_TC_ETRGEDG_RISING (1 << 8)
+#define        ATMEL_TC_ETRGEDG_FALLING        (2 << 8)
+#define        ATMEL_TC_ETRGEDG_BOTH   (3 << 8)
+#define     ATMEL_TC_ABETRG    (1 << 10)       /* external trigger is TIOA? */
+#define     ATMEL_TC_CPCTRG    (1 << 14)       /* RC compare trigger enable */
+#define     ATMEL_TC_LDRA      (3 << 16)       /* RA loading edge (of TIOA) */
+#define        ATMEL_TC_LDRA_NONE      (0 << 16)
+#define        ATMEL_TC_LDRA_RISING    (1 << 16)
+#define        ATMEL_TC_LDRA_FALLING   (2 << 16)
+#define        ATMEL_TC_LDRA_BOTH      (3 << 16)
+#define     ATMEL_TC_LDRB      (3 << 18)       /* RB loading edge (of TIOA) */
+#define        ATMEL_TC_LDRB_NONE      (0 << 18)
+#define        ATMEL_TC_LDRB_RISING    (1 << 18)
+#define        ATMEL_TC_LDRB_FALLING   (2 << 18)
+#define        ATMEL_TC_LDRB_BOTH      (3 << 18)
+
+/* WAVEFORM mode CMR bits */
+#define     ATMEL_TC_CPCSTOP   (1 <<  6)       /* RC compare stops counter */
+#define     ATMEL_TC_CPCDIS    (1 <<  7)       /* RC compare disables counter */
+#define     ATMEL_TC_EEVTEDG   (3 <<  8)       /* external event edge */
+#define        ATMEL_TC_EEVTEDG_NONE   (0 << 8)
+#define        ATMEL_TC_EEVTEDG_RISING (1 << 8)
+#define        ATMEL_TC_EEVTEDG_FALLING        (2 << 8)
+#define        ATMEL_TC_EEVTEDG_BOTH   (3 << 8)
+#define     ATMEL_TC_EEVT      (3 << 10)       /* external event source */
+#define        ATMEL_TC_EEVT_TIOB      (0 << 10)
+#define        ATMEL_TC_EEVT_XC0       (1 << 10)
+#define        ATMEL_TC_EEVT_XC1       (2 << 10)
+#define        ATMEL_TC_EEVT_XC2       (3 << 10)
+#define     ATMEL_TC_ENETRG    (1 << 12)       /* external event is trigger */
+#define     ATMEL_TC_WAVESEL   (3 << 13)       /* waveform type */
+#define        ATMEL_TC_WAVESEL_UP     (0 << 13)
+#define        ATMEL_TC_WAVESEL_UPDOWN (1 << 13)
+#define        ATMEL_TC_WAVESEL_UP_AUTO        (2 << 13)
+#define        ATMEL_TC_WAVESEL_UPDOWN_AUTO (3 << 13)
+#define     ATMEL_TC_ACPA      (3 << 16)       /* RA compare changes TIOA */
+#define        ATMEL_TC_ACPA_NONE      (0 << 16)
+#define        ATMEL_TC_ACPA_SET       (1 << 16)
+#define        ATMEL_TC_ACPA_CLEAR     (2 << 16)
+#define        ATMEL_TC_ACPA_TOGGLE    (3 << 16)
+#define     ATMEL_TC_ACPC      (3 << 18)       /* RC compare changes TIOA */
+#define        ATMEL_TC_ACPC_NONE      (0 << 18)
+#define        ATMEL_TC_ACPC_SET       (1 << 18)
+#define        ATMEL_TC_ACPC_CLEAR     (2 << 18)
+#define        ATMEL_TC_ACPC_TOGGLE    (3 << 18)
+#define     ATMEL_TC_AEEVT     (3 << 20)       /* external event changes TIOA */
+#define        ATMEL_TC_AEEVT_NONE     (0 << 20)
+#define        ATMEL_TC_AEEVT_SET      (1 << 20)
+#define        ATMEL_TC_AEEVT_CLEAR    (2 << 20)
+#define        ATMEL_TC_AEEVT_TOGGLE   (3 << 20)
+#define     ATMEL_TC_ASWTRG    (3 << 22)       /* software trigger changes TIOA */
+#define        ATMEL_TC_ASWTRG_NONE    (0 << 22)
+#define        ATMEL_TC_ASWTRG_SET     (1 << 22)
+#define        ATMEL_TC_ASWTRG_CLEAR   (2 << 22)
+#define        ATMEL_TC_ASWTRG_TOGGLE  (3 << 22)
+#define     ATMEL_TC_BCPB      (3 << 24)       /* RB compare changes TIOB */
+#define        ATMEL_TC_BCPB_NONE      (0 << 24)
+#define        ATMEL_TC_BCPB_SET       (1 << 24)
+#define        ATMEL_TC_BCPB_CLEAR     (2 << 24)
+#define        ATMEL_TC_BCPB_TOGGLE    (3 << 24)
+#define     ATMEL_TC_BCPC      (3 << 26)       /* RC compare changes TIOB */
+#define        ATMEL_TC_BCPC_NONE      (0 << 26)
+#define        ATMEL_TC_BCPC_SET       (1 << 26)
+#define        ATMEL_TC_BCPC_CLEAR     (2 << 26)
+#define        ATMEL_TC_BCPC_TOGGLE    (3 << 26)
+#define     ATMEL_TC_BEEVT     (3 << 28)       /* external event changes TIOB */
+#define        ATMEL_TC_BEEVT_NONE     (0 << 28)
+#define        ATMEL_TC_BEEVT_SET      (1 << 28)
+#define        ATMEL_TC_BEEVT_CLEAR    (2 << 28)
+#define        ATMEL_TC_BEEVT_TOGGLE   (3 << 28)
+#define     ATMEL_TC_BSWTRG    (3 << 30)       /* software trigger changes TIOB */
+#define        ATMEL_TC_BSWTRG_NONE    (0 << 30)
+#define        ATMEL_TC_BSWTRG_SET     (1 << 30)
+#define        ATMEL_TC_BSWTRG_CLEAR   (2 << 30)
+#define        ATMEL_TC_BSWTRG_TOGGLE  (3 << 30)
+
+#define ATMEL_TC_CV    0x10            /* counter Value */
+#define ATMEL_TC_RA    0x14            /* register A */
+#define ATMEL_TC_RB    0x18            /* register B */
+#define ATMEL_TC_RC    0x1c            /* register C */
+
+#define ATMEL_TC_SR    0x20            /* status (read-only) */
+/* Status-only flags */
+#define     ATMEL_TC_CLKSTA    (1 << 16)       /* clock enabled */
+#define     ATMEL_TC_MTIOA     (1 << 17)       /* TIOA mirror */
+#define     ATMEL_TC_MTIOB     (1 << 18)       /* TIOB mirror */
+
+#define ATMEL_TC_IER   0x24            /* interrupt enable (write-only) */
+#define ATMEL_TC_IDR   0x28            /* interrupt disable (write-only) */
+#define ATMEL_TC_IMR   0x2c            /* interrupt mask (read-only) */
+
+/* Status and IRQ flags */
+#define     ATMEL_TC_COVFS     (1 <<  0)       /* counter overflow */
+#define     ATMEL_TC_LOVRS     (1 <<  1)       /* load overrun */
+#define     ATMEL_TC_CPAS      (1 <<  2)       /* RA compare */
+#define     ATMEL_TC_CPBS      (1 <<  3)       /* RB compare */
+#define     ATMEL_TC_CPCS      (1 <<  4)       /* RC compare */
+#define     ATMEL_TC_LDRAS     (1 <<  5)       /* RA loading */
+#define     ATMEL_TC_LDRBS     (1 <<  6)       /* RB loading */
+#define     ATMEL_TC_ETRGS     (1 <<  7)       /* external trigger */
+
+#endif