[PATCH] add support for Marvell 8385 CF cards
authorHolger Schurig <hs4233@mail.mn-solutions.de>
Thu, 4 Oct 2007 00:25:41 +0000 (17:25 -0700)
committerDavid S. Miller <davem@sunset.davemloft.net>
Wed, 10 Oct 2007 23:49:56 +0000 (16:49 -0700)
This patch adds support for Marvell based 8385 compact flash cards.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/wireless/Kconfig
drivers/net/wireless/libertas/Makefile
drivers/net/wireless/libertas/if_cs.c [new file with mode: 0644]

index adf0d20..8d1541b 100644 (file)
@@ -275,6 +275,13 @@ config LIBERTAS_USB
        ---help---
          A driver for Marvell Libertas 8388 USB devices.
 
+config LIBERTAS_CS
+       tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
+       depends on LIBERTAS && PCMCIA && EXPERIMENTAL
+       select FW_LOADER
+       ---help---
+         A driver for Marvell Libertas 8385 CompactFlash devices.
+
 config LIBERTAS_DEBUG
        bool "Enable full debugging output in the Libertas module."
        depends on LIBERTAS
index b56b4c5..c469d56 100644 (file)
@@ -6,6 +6,8 @@ libertas-objs := main.o wext.o \
                ethtool.o assoc.o
 
 usb8xxx-objs += if_usb.o
+libertas_cs-objs += if_cs.o
 
 obj-$(CONFIG_LIBERTAS)     += libertas.o
 obj-$(CONFIG_LIBERTAS_USB) += usb8xxx.o
+obj-$(CONFIG_LIBERTAS_CS)  += libertas_cs.o
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
new file mode 100644 (file)
index 0000000..888f023
--- /dev/null
@@ -0,0 +1,1005 @@
+/*
+
+  Driver for the Marvell 8385 based compact flash WLAN cards.
+
+  (C) 2007 by Holger Schurig <hs4233@mail.mn-solutions.de>
+
+  This program is free software; you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation; either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program; see the file COPYING.  If not, write to
+  the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+  Boston, MA 02110-1301, USA.
+
+*/
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/moduleparam.h>
+#include <linux/firmware.h>
+#include <linux/netdevice.h>
+
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+
+#include <linux/io.h>
+
+#define DRV_NAME "libertas_cs"
+
+#include "decl.h"
+#include "defs.h"
+#include "dev.h"
+
+
+/********************************************************************/
+/* Module stuff                                                     */
+/********************************************************************/
+
+MODULE_AUTHOR("Holger Schurig <hs4233@mail.mn-solutions.de>");
+MODULE_DESCRIPTION("Driver for Marvell 83xx compact flash WLAN cards");
+MODULE_LICENSE("GPL");
+
+
+
+/********************************************************************/
+/* Data structures                                                  */
+/********************************************************************/
+
+struct if_cs_card {
+       struct pcmcia_device *p_dev;
+       wlan_private *priv;
+       void __iomem *iobase;
+};
+
+
+
+/********************************************************************/
+/* Hardware access                                                  */
+/********************************************************************/
+
+/* This define enables wrapper functions which allow you
+   to dump all register accesses. You normally won't this,
+   except for development */
+/* #define DEBUG_IO */
+
+#ifdef DEBUG_IO
+static int debug_output = 0;
+#else
+/* This way the compiler optimizes the printk's away */
+#define debug_output 0
+#endif
+
+static inline unsigned int if_cs_read8(struct if_cs_card *card, uint reg)
+{
+       unsigned int val = ioread8(card->iobase + reg);
+       if (debug_output)
+               printk(KERN_INFO "##inb %08x<%02x\n", reg, val);
+       return val;
+}
+static inline unsigned int if_cs_read16(struct if_cs_card *card, uint reg)
+{
+       unsigned int val = ioread16(card->iobase + reg);
+       if (debug_output)
+               printk(KERN_INFO "##inw %08x<%04x\n", reg, val);
+       return val;
+}
+static inline void if_cs_read16_rep(
+       struct if_cs_card *card,
+       uint reg,
+       void *buf,
+       unsigned long count)
+{
+       if (debug_output)
+               printk(KERN_INFO "##insw %08x<(0x%lx words)\n",
+                       reg, count);
+       ioread16_rep(card->iobase + reg, buf, count);
+}
+
+static inline void if_cs_write8(struct if_cs_card *card, uint reg, u8 val)
+{
+       if (debug_output)
+               printk(KERN_INFO "##outb %08x>%02x\n", reg, val);
+       iowrite8(val, card->iobase + reg);
+}
+
+static inline void if_cs_write16(struct if_cs_card *card, uint reg, u16 val)
+{
+       if (debug_output)
+               printk(KERN_INFO "##outw %08x>%04x\n", reg, val);
+       iowrite16(val, card->iobase + reg);
+}
+
+static inline void if_cs_write16_rep(
+       struct if_cs_card *card,
+       uint reg,
+       void *buf,
+       unsigned long count)
+{
+       if (debug_output)
+               printk(KERN_INFO "##outsw %08x>(0x%lx words)\n",
+                       reg, count);
+       iowrite16_rep(card->iobase + reg, buf, count);
+}
+
+
+/*
+ * I know that polling/delaying is frowned upon. However, this procedure
+ * with polling is needed while downloading the firmware. At this stage,
+ * the hardware does unfortunately not create any interrupts.
+ *
+ * Fortunately, this function is never used once the firmware is in
+ * the card. :-)
+ *
+ * As a reference, see the "Firmware Specification v5.1", page 18
+ * and 19. I did not follow their suggested timing to the word,
+ * but this works nice & fast anyway.
+ */
+static int if_cs_poll_while_fw_download(struct if_cs_card *card, uint addr, u8 reg)
+{
+       int i;
+
+       for (i = 0; i < 500; i++) {
+               u8 val = if_cs_read8(card, addr);
+               if (val == reg)
+                       return i;
+               udelay(100);
+       }
+       return -ETIME;
+}
+
+
+
+/* Host control registers and their bit definitions */
+
+#define IF_CS_H_STATUS                 0x00000000
+#define IF_CS_H_STATUS_TX_OVER         0x0001
+#define IF_CS_H_STATUS_RX_OVER         0x0002
+#define IF_CS_H_STATUS_DNLD_OVER       0x0004
+
+#define IF_CS_H_INT_CAUSE              0x00000002
+#define IF_CS_H_IC_TX_OVER             0x0001
+#define IF_CS_H_IC_RX_OVER             0x0002
+#define IF_CS_H_IC_DNLD_OVER           0x0004
+#define IF_CS_H_IC_HOST_EVENT          0x0008
+#define IF_CS_H_IC_MASK                        0x001f
+
+#define IF_CS_H_INT_MASK               0x00000004
+#define        IF_CS_H_IM_MASK                 0x001f
+
+#define IF_CS_H_WRITE_LEN              0x00000014
+
+#define IF_CS_H_WRITE                  0x00000016
+
+#define IF_CS_H_CMD_LEN                        0x00000018
+
+#define IF_CS_H_CMD                    0x0000001A
+
+#define IF_CS_C_READ_LEN               0x00000024
+
+#define IF_CS_H_READ                   0x00000010
+
+/* Card control registers and their bit definitions */
+
+#define IF_CS_C_STATUS                 0x00000020
+#define IF_CS_C_S_TX_DNLD_RDY          0x0001
+#define IF_CS_C_S_RX_UPLD_RDY          0x0002
+#define IF_CS_C_S_CMD_DNLD_RDY         0x0004
+#define IF_CS_C_S_CMD_UPLD_RDY         0x0008
+#define IF_CS_C_S_CARDEVENT            0x0010
+#define IF_CS_C_S_MASK                 0x001f
+#define IF_CS_C_S_STATUS_MASK          0x7f00
+/* The following definitions should be the same as the MRVDRV_ ones */
+
+#if MRVDRV_CMD_DNLD_RDY != IF_CS_C_S_CMD_DNLD_RDY
+#error MRVDRV_CMD_DNLD_RDY and IF_CS_C_S_CMD_DNLD_RDY not in sync
+#endif
+#if MRVDRV_CMD_UPLD_RDY != IF_CS_C_S_CMD_UPLD_RDY
+#error MRVDRV_CMD_UPLD_RDY and IF_CS_C_S_CMD_UPLD_RDY not in sync
+#endif
+#if MRVDRV_CARDEVENT != IF_CS_C_S_CARDEVENT
+#error MRVDRV_CARDEVENT and IF_CS_C_S_CARDEVENT not in sync
+#endif
+
+#define IF_CS_C_INT_CAUSE              0x00000022
+#define        IF_CS_C_IC_MASK                 0x001f
+
+#define IF_CS_C_SQ_READ_LOW            0x00000028
+#define IF_CS_C_SQ_HELPER_OK           0x10
+
+#define IF_CS_C_CMD_LEN                        0x00000030
+
+#define IF_CS_C_CMD                    0x00000012
+
+#define IF_CS_SCRATCH                  0x0000003F
+
+
+
+/********************************************************************/
+/* Interrupts                                                       */
+/********************************************************************/
+
+static inline void if_cs_enable_ints(struct if_cs_card *card)
+{
+       lbs_deb_enter(LBS_DEB_CS);
+       if_cs_write16(card, IF_CS_H_INT_MASK, 0);
+}
+
+static inline void if_cs_disable_ints(struct if_cs_card *card)
+{
+       lbs_deb_enter(LBS_DEB_CS);
+       if_cs_write16(card, IF_CS_H_INT_MASK, IF_CS_H_IM_MASK);
+}
+
+static irqreturn_t if_cs_interrupt(int irq, void *data)
+{
+       struct if_cs_card *card = (struct if_cs_card *)data;
+       u16 int_cause;
+
+       lbs_deb_enter(LBS_DEB_CS);
+
+       int_cause = if_cs_read16(card, IF_CS_C_INT_CAUSE);
+       switch (int_cause) {
+       case 0x0000:
+               /* not for us */
+               return IRQ_NONE;
+       case 0xffff:
+               /* if one reads junk, then probably the card was removed */
+               card->priv->adapter->surpriseremoved = 1;
+               break;
+       case IF_CS_H_IC_TX_OVER:
+               if (card->priv->adapter->connect_status == LIBERTAS_CONNECTED)
+                       netif_wake_queue(card->priv->dev);
+               /* fallthrought */
+       default:
+               /* clear interrupt */
+               if_cs_write16(card, IF_CS_C_INT_CAUSE, int_cause & IF_CS_C_IC_MASK);
+               if_cs_disable_ints(card);
+       }
+
+       libertas_interrupt(card->priv->dev);
+
+       return IRQ_HANDLED;
+}
+
+
+
+
+/********************************************************************/
+/* I/O                                                              */
+/********************************************************************/
+
+/*
+ * Called from if_cs_host_to_card to send a command to the hardware
+ */
+static int if_cs_send_cmd(wlan_private *priv, u8 *buf, u16 nb)
+{
+       struct if_cs_card *card = (struct if_cs_card *)priv->card;
+       int ret = -1;
+       int loops = 0;
+
+       lbs_deb_enter(LBS_DEB_CS);
+
+       /* Is hardware ready? */
+       while (1) {
+               u16 val = if_cs_read16(card, IF_CS_C_STATUS);
+               if (val & IF_CS_C_S_CMD_DNLD_RDY)
+                       break;
+               if (++loops > 100) {
+                       lbs_pr_err("card not ready for commands\n");
+                       goto done;
+               }
+               mdelay(1);
+       }
+
+       if_cs_write16(card, IF_CS_H_CMD_LEN, nb);
+
+       if_cs_write16_rep(card, IF_CS_H_CMD, buf, nb / 2);
+       /* Are we supposed to transfer an odd amount of bytes? */
+       if (nb & 1)
+               if_cs_write8(card, IF_CS_H_CMD, buf[nb-1]);
+
+       /* "Assert the download over interrupt command in the Host
+        * status register" */
+       if_cs_write16(card, IF_CS_H_STATUS, IF_CS_H_STATUS_DNLD_OVER);
+
+       /* "Assert the download over interrupt command in the Card
+        * interrupt case register" */
+       if_cs_write16(card, IF_CS_H_INT_CAUSE, IF_CS_H_IC_DNLD_OVER);
+       ret = 0;
+
+done:
+       lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
+       return ret;
+}
+
+
+/*
+ * Called from if_cs_host_to_card to send a data to the hardware
+ */
+static void if_cs_send_data(wlan_private *priv, u8 *buf, u16 nb)
+{
+       struct if_cs_card *card = (struct if_cs_card *)priv->card;
+
+       lbs_deb_enter(LBS_DEB_CS);
+
+       if_cs_write16(card, IF_CS_H_WRITE_LEN, nb);
+
+       /* write even number of bytes, then odd byte if necessary */
+       if_cs_write16_rep(card, IF_CS_H_WRITE, buf, nb / 2);
+       if (nb & 1)
+               if_cs_write8(card, IF_CS_H_WRITE, buf[nb-1]);
+
+       if_cs_write16(card, IF_CS_H_STATUS, IF_CS_H_STATUS_TX_OVER);
+       if_cs_write16(card, IF_CS_H_INT_CAUSE, IF_CS_H_STATUS_TX_OVER);
+
+       lbs_deb_leave(LBS_DEB_CS);
+}
+
+
+/*
+ * Get the command result out of the card.
+ */
+static int if_cs_receive_cmdres(wlan_private *priv, u8* data, u32 *len)
+{
+       int ret = -1;
+       u16 val;
+
+       lbs_deb_enter(LBS_DEB_CS);
+
+       /* is hardware ready? */
+       val = if_cs_read16(priv->card, IF_CS_C_STATUS);
+       if ((val & IF_CS_C_S_CMD_UPLD_RDY) == 0) {
+               lbs_pr_err("card not ready for CMD\n");
+               goto out;
+       }
+
+       *len = if_cs_read16(priv->card, IF_CS_C_CMD_LEN);
+       if ((*len == 0) || (*len > MRVDRV_SIZE_OF_CMD_BUFFER)) {
+               lbs_pr_err("card cmd buffer has invalid # of bytes (%d)\n", *len);
+               goto out;
+       }
+
+       /* read even number of bytes, then odd byte if necessary */
+       if_cs_read16_rep(priv->card, IF_CS_C_CMD, data, *len/sizeof(u16));
+       if (*len & 1)
+               data[*len-1] = if_cs_read8(priv->card, IF_CS_C_CMD);
+
+       ret = 0;
+out:
+       lbs_deb_leave_args(LBS_DEB_CS, "ret %d, len %d", ret, *len);
+       return ret;
+}
+
+
+static struct sk_buff *if_cs_receive_data(wlan_private *priv)
+{
+       struct sk_buff *skb = NULL;
+       u16 len;
+       u8 *data;
+
+       lbs_deb_enter(LBS_DEB_CS);
+
+       len = if_cs_read16(priv->card, IF_CS_C_READ_LEN);
+       if (len == 0 || len > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
+               lbs_pr_err("card data buffer has invalid # of bytes (%d)\n", len);
+               priv->stats.rx_dropped++;
+               printk(KERN_INFO "##HS %s:%d TODO\n", __FUNCTION__, __LINE__);
+               goto dat_err;
+       }
+
+       //TODO: skb = dev_alloc_skb(len+ETH_FRAME_LEN+MRVDRV_SNAP_HEADER_LEN+EXTRA_LEN);
+       skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE);
+       if (!skb)
+               goto out;
+       data = skb_put(skb, len);
+
+       /* read even number of bytes, then odd byte if necessary */
+       if_cs_read16_rep(priv->card, IF_CS_H_READ, data, len/sizeof(u16));
+       if (len & 1)
+               data[len-1] = if_cs_read8(priv->card, IF_CS_H_READ);
+
+dat_err:
+       if_cs_write16(priv->card, IF_CS_H_STATUS, IF_CS_H_STATUS_RX_OVER);
+       if_cs_write16(priv->card, IF_CS_H_INT_CAUSE, IF_CS_H_IC_RX_OVER);
+
+out:
+       lbs_deb_leave_args(LBS_DEB_CS, "ret %p", skb);
+       return skb;
+}
+
+
+
+/********************************************************************/
+/* Firmware                                                         */
+/********************************************************************/
+
+/*
+ * Tries to program the helper firmware.
+ *
+ * Return 0 on success
+ */
+static int if_cs_prog_helper(struct if_cs_card *card)
+{
+       int ret = 0;
+       int sent = 0;
+       u8  scratch;
+       const struct firmware *fw;
+
+       lbs_deb_enter(LBS_DEB_CS);
+
+       scratch = if_cs_read8(card, IF_CS_SCRATCH);
+
+       /* "If the value is 0x5a, the firmware is already
+        * downloaded successfully"
+        */
+       if (scratch == 0x5a)
+               goto done;
+
+       /* "If the value is != 00, it is invalid value of register */
+       if (scratch != 0x00) {
+               ret = -ENODEV;
+               goto done;
+       }
+
+       /* TODO: make firmware file configurable */
+       ret = request_firmware(&fw, "libertas_cs_helper.fw",
+               &handle_to_dev(card->p_dev));
+       if (ret) {
+               lbs_pr_err("can't load helper firmware\n");
+               ret = -ENODEV;
+               goto done;
+       }
+       lbs_deb_cs("helper size %d\n", fw->size);
+
+       /* "Set the 5 bytes of the helper image to 0" */
+       /* Not needed, this contains an ARM branch instruction */
+
+       for (;;) {
+               /* "the number of bytes to send is 256" */
+               int count = 256;
+               int remain = fw->size - sent;
+
+               if (remain < count)
+                       count = remain;
+               /* printk(KERN_INFO "//HS %d loading %d of %d bytes\n",
+                       __LINE__, sent, fw->size); */
+
+               /* "write the number of bytes to be sent to the I/O Command
+                * write length register" */
+               if_cs_write16(card, IF_CS_H_CMD_LEN, count);
+
+               /* "write this to I/O Command port register as 16 bit writes */
+               if (count)
+                       if_cs_write16_rep(card, IF_CS_H_CMD,
+                               &fw->data[sent],
+                               count >> 1);
+
+               /* "Assert the download over interrupt command in the Host
+                * status register" */
+               if_cs_write8(card, IF_CS_H_STATUS, IF_CS_H_STATUS_DNLD_OVER);
+
+               /* "Assert the download over interrupt command in the Card
+                * interrupt case register" */
+               if_cs_write16(card, IF_CS_H_INT_CAUSE, IF_CS_H_IC_DNLD_OVER);
+
+               /* "The host polls the Card Status register ... for 50 ms before
+                  declaring a failure */
+               ret = if_cs_poll_while_fw_download(card, IF_CS_C_STATUS,
+                       IF_CS_C_S_CMD_DNLD_RDY);
+               if (ret < 0) {
+                       lbs_pr_err("can't download helper at 0x%x, ret %d\n",
+                               sent, ret);
+                       goto done;
+               }
+
+               if (count == 0)
+                       break;
+
+               sent += count;
+       }
+
+       release_firmware(fw);
+       ret = 0;
+
+done:
+       lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
+       return ret;
+}
+
+
+static int if_cs_prog_real(struct if_cs_card *card)
+{
+       const struct firmware *fw;
+       int ret = 0;
+       int retry = 0;
+       int len = 0;
+       int sent;
+
+       lbs_deb_enter(LBS_DEB_CS);
+
+       /* TODO: make firmware file configurable */
+       ret = request_firmware(&fw, "libertas_cs.fw",
+               &handle_to_dev(card->p_dev));
+       if (ret) {
+               lbs_pr_err("can't load firmware\n");
+               ret = -ENODEV;
+               goto done;
+       }
+       lbs_deb_cs("fw size %d\n", fw->size);
+
+       ret = if_cs_poll_while_fw_download(card, IF_CS_C_SQ_READ_LOW, IF_CS_C_SQ_HELPER_OK);
+       if (ret < 0) {
+               int i;
+               lbs_pr_err("helper firmware doesn't answer\n");
+               for (i = 0; i < 0x50; i += 2)
+                       printk(KERN_INFO "## HS %02x: %04x\n",
+                               i, if_cs_read16(card, i));
+               goto err_release;
+       }
+
+       for (sent = 0; sent < fw->size; sent += len) {
+               len = if_cs_read16(card, IF_CS_C_SQ_READ_LOW);
+               /* printk(KERN_INFO "//HS %d loading %d of %d bytes\n",
+                       __LINE__, sent, fw->size); */
+               if (len & 1) {
+                       retry++;
+                       lbs_pr_info("odd, need to retry this firmware block\n");
+               } else {
+                       retry = 0;
+               }
+
+               if (retry > 20) {
+                       lbs_pr_err("could not download firmware\n");
+                       ret = -ENODEV;
+                       goto err_release;
+               }
+               if (retry) {
+                       sent -= len;
+               }
+
+
+               if_cs_write16(card, IF_CS_H_CMD_LEN, len);
+
+               if_cs_write16_rep(card, IF_CS_H_CMD,
+                       &fw->data[sent],
+                       (len+1) >> 1);
+               if_cs_write8(card, IF_CS_H_STATUS, IF_CS_H_STATUS_DNLD_OVER);
+               if_cs_write16(card, IF_CS_H_INT_CAUSE, IF_CS_H_IC_DNLD_OVER);
+
+               ret = if_cs_poll_while_fw_download(card, IF_CS_C_STATUS,
+                       IF_CS_C_S_CMD_DNLD_RDY);
+               if (ret < 0) {
+                       lbs_pr_err("can't download firmware at 0x%x\n", sent);
+                       goto err_release;
+               }
+       }
+
+       ret = if_cs_poll_while_fw_download(card, IF_CS_SCRATCH, 0x5a);
+       if (ret < 0) {
+               lbs_pr_err("firmware download failed\n");
+               goto err_release;
+       }
+
+       ret = 0;
+       goto done;
+
+
+err_release:
+       release_firmware(fw);
+
+done:
+       lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
+       return ret;
+}
+
+
+
+/********************************************************************/
+/* Callback functions for libertas.ko                               */
+/********************************************************************/
+
+static int if_cs_register_dev(wlan_private *priv)
+{
+       struct if_cs_card *card = (struct if_cs_card *)priv->card;
+
+       lbs_deb_enter(LBS_DEB_CS);
+
+       card->priv = priv;
+
+       return 0;
+}
+
+
+static int if_cs_unregister_dev(wlan_private *priv)
+{
+       lbs_deb_enter(LBS_DEB_CS);
+
+       /*
+        * Nothing special here. Because the device's power gets turned off
+        * anyway, there's no need to send a RESET command like in if_usb.c
+        */
+
+       return 0;
+}
+
+
+/*
+ * This callback is a dummy. The reason is that the USB code needs
+ * to have various things set up in order to be able to download the
+ * firmware. That's not needed in our case.
+ *
+ * On the contrary, if libertas_add_card() has been called and we're
+ * then later called via libertas_activate_card(), but without a valid
+ * firmware, then it's quite tedious to tear down the half-installed
+ * card. Therefore, we download the firmware before calling adding/
+ * activating the card in the first place. If that doesn't work, we
+ * won't call into libertas.ko at all.
+ */
+
+static int if_cs_prog_firmware(wlan_private *priv)
+{
+       priv->adapter->fw_ready = 1;
+       return 0;
+}
+
+
+/* Send commands or data packets to the card */
+static int if_cs_host_to_card(wlan_private *priv, u8 type, u8 *buf, u16 nb)
+{
+       int ret = -1;
+
+       lbs_deb_enter_args(LBS_DEB_CS, "type %d, bytes %d", type, nb);
+
+       switch (type) {
+       case MVMS_DAT:
+               priv->dnld_sent = DNLD_CMD_SENT;
+               if_cs_send_data(priv, buf, nb);
+               ret = 0;
+               break;
+       case MVMS_CMD:
+               ret = if_cs_send_cmd(priv, buf, nb);
+               break;
+       default:
+               lbs_pr_err("%s: unsupported type %d\n", __FUNCTION__, type);
+       }
+
+       lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
+       return ret;
+}
+
+
+static int if_cs_get_int_status(wlan_private *priv, u8 *ireg)
+{
+       struct if_cs_card *card = (struct if_cs_card *)priv->card;
+       //wlan_adapter *adapter = priv->adapter;
+       int ret = 0;
+       u16 int_cause;
+       u8 *cmdbuf;
+       *ireg = 0;
+
+       lbs_deb_enter(LBS_DEB_CS);
+
+       if (priv->adapter->surpriseremoved)
+               goto out;
+
+       int_cause = if_cs_read16(card, IF_CS_C_INT_CAUSE) & IF_CS_C_IC_MASK;
+       if_cs_write16(card, IF_CS_C_INT_CAUSE, int_cause);
+
+       *ireg = if_cs_read16(card, IF_CS_C_STATUS) & IF_CS_C_S_MASK;
+       if_cs_enable_ints(card);
+
+       if (!*ireg)
+               goto sbi_get_int_status_exit;
+
+sbi_get_int_status_exit:
+
+       /* is there a data packet for us? */
+       if (*ireg & IF_CS_C_S_RX_UPLD_RDY) {
+               struct sk_buff *skb = if_cs_receive_data(priv);
+               libertas_process_rxed_packet(priv, skb);
+               *ireg &= ~IF_CS_C_S_RX_UPLD_RDY;
+       }
+
+       if (*ireg & IF_CS_C_S_TX_DNLD_RDY) {
+               priv->dnld_sent = DNLD_RES_RECEIVED;
+       }
+
+       /* Card has a command result for us */
+       if (*ireg & IF_CS_C_S_CMD_UPLD_RDY) {
+               spin_lock(&priv->adapter->driver_lock);
+               if (!priv->adapter->cur_cmd) {
+                       cmdbuf = priv->upld_buf;
+                       priv->adapter->hisregcpy &= ~IF_CS_C_S_RX_UPLD_RDY;
+               } else {
+                       cmdbuf = priv->adapter->cur_cmd->bufvirtualaddr;
+               }
+
+               ret = if_cs_receive_cmdres(priv, cmdbuf, &priv->upld_len);
+               spin_unlock(&priv->adapter->driver_lock);
+               if (ret < 0)
+                       lbs_pr_err("could not receive cmd from card\n");
+       }
+
+out:
+       lbs_deb_leave_args(LBS_DEB_CS, "ret %d, ireg 0x%x, hisregcpy 0x%x", ret, *ireg, priv->adapter->hisregcpy);
+       return ret;
+}
+
+
+static int if_cs_read_event_cause(wlan_private *priv)
+{
+       lbs_deb_enter(LBS_DEB_CS);
+
+       priv->adapter->eventcause = (if_cs_read16(priv->card, IF_CS_C_STATUS) & IF_CS_C_S_STATUS_MASK) >> 5;
+       if_cs_write16(priv->card, IF_CS_H_INT_CAUSE, IF_CS_H_IC_HOST_EVENT);
+
+       return 0;
+}
+
+
+
+/********************************************************************/
+/* Card Services                                                    */
+/********************************************************************/
+
+/*
+ * After a card is removed, if_cs_release() will unregister the
+ * device, and release the PCMCIA configuration.  If the device is
+ * still open, this will be postponed until it is closed.
+ */
+static void if_cs_release(struct pcmcia_device *p_dev)
+{
+       struct if_cs_card *card = p_dev->priv;
+
+       lbs_deb_enter(LBS_DEB_CS);
+
+       pcmcia_disable_device(p_dev);
+       free_irq(p_dev->irq.AssignedIRQ, card);
+       if (card->iobase)
+               ioport_unmap(card->iobase);
+
+       lbs_deb_leave(LBS_DEB_CS);
+}
+
+
+/*
+ * This creates an "instance" of the driver, allocating local data
+ * structures for one device.  The device is registered with Card
+ * Services.
+ *
+ * The dev_link structure is initialized, but we don't actually
+ * configure the card at this point -- we wait until we receive a card
+ * insertion event.
+ */
+static int if_cs_probe(struct pcmcia_device *p_dev)
+{
+       int ret = -ENOMEM;
+       wlan_private *priv;
+       struct if_cs_card *card;
+       /* CIS parsing */
+       tuple_t tuple;
+       cisparse_t parse;
+       cistpl_cftable_entry_t *cfg = &parse.cftable_entry;
+       cistpl_io_t *io = &cfg->io;
+       u_char buf[64];
+
+       lbs_deb_enter(LBS_DEB_CS);
+
+       card = kzalloc(sizeof(struct if_cs_card), GFP_KERNEL);
+       if (!card) {
+               lbs_pr_err("error in kzalloc\n");
+               goto out;
+       }
+       card->p_dev = p_dev;
+       p_dev->priv = card;
+
+       p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
+       p_dev->irq.Handler = NULL;
+       p_dev->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
+
+       p_dev->conf.Attributes = 0;
+       p_dev->conf.IntType = INT_MEMORY_AND_IO;
+
+       tuple.Attributes = 0;
+       tuple.TupleData = buf;
+       tuple.TupleDataMax = sizeof(buf);
+       tuple.TupleOffset = 0;
+
+       tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+       if ((ret = pcmcia_get_first_tuple(p_dev, &tuple)) != 0 ||
+           (ret = pcmcia_get_tuple_data(p_dev, &tuple)) != 0 ||
+           (ret = pcmcia_parse_tuple(p_dev, &tuple, &parse)) != 0)
+       {
+               lbs_pr_err("error in pcmcia_get_first_tuple etc\n");
+               goto out1;
+       }
+
+       p_dev->conf.ConfigIndex = cfg->index;
+
+       /* Do we need to allocate an interrupt? */
+       if (cfg->irq.IRQInfo1) {
+               p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+       }
+
+       /* IO window settings */
+       if (cfg->io.nwin != 1) {
+               lbs_pr_err("wrong CIS (check number of IO windows)\n");
+               ret = -ENODEV;
+               goto out1;
+       }
+       p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+       p_dev->io.BasePort1 = io->win[0].base;
+       p_dev->io.NumPorts1 = io->win[0].len;
+
+       /* This reserves IO space but doesn't actually enable it */
+       ret = pcmcia_request_io(p_dev, &p_dev->io);
+       if (ret) {
+               lbs_pr_err("error in pcmcia_request_io\n");
+               goto out1;
+       }
+
+       /*
+        * Allocate an interrupt line.  Note that this does not assign
+        * a handler to the interrupt, unless the 'Handler' member of
+        * the irq structure is initialized.
+        */
+       if (p_dev->conf.Attributes & CONF_ENABLE_IRQ) {
+               ret = pcmcia_request_irq(p_dev, &p_dev->irq);
+               if (ret) {
+                       lbs_pr_err("error in pcmcia_request_irq\n");
+                       goto out1;
+               }
+       }
+
+       /* Initialize io access */
+       card->iobase = ioport_map(p_dev->io.BasePort1, p_dev->io.NumPorts1);
+       if (!card->iobase) {
+               lbs_pr_err("error in ioport_map\n");
+               ret = -EIO;
+               goto out1;
+       }
+
+       /*
+        * This actually configures the PCMCIA socket -- setting up
+        * the I/O windows and the interrupt mapping, and putting the
+        * card and host interface into "Memory and IO" mode.
+        */
+       ret = pcmcia_request_configuration(p_dev, &p_dev->conf);
+       if (ret) {
+               lbs_pr_err("error in pcmcia_request_configuration\n");
+               goto out2;
+       }
+
+       /* Finally, report what we've done */
+       lbs_deb_cs("irq %d, io 0x%04x-0x%04x\n",
+              p_dev->irq.AssignedIRQ, p_dev->io.BasePort1,
+              p_dev->io.BasePort1 + p_dev->io.NumPorts1 - 1);
+
+       if_cs_enable_ints(card);
+
+       /* Load the firmware early, before calling into libertas.ko */
+       ret = if_cs_prog_helper(card);
+       if (ret == 0)
+               ret = if_cs_prog_real(card);
+       if (ret)
+               goto out2;
+
+       /* Make this card known to the libertas driver */
+       priv = libertas_add_card(card, &p_dev->dev);
+       if (!priv) {
+               ret = -ENOMEM;
+               goto out2;
+       }
+
+       /* Store pointers to our call-back functions */
+       priv->card = card;
+       priv->hw_register_dev     = if_cs_register_dev;
+       priv->hw_unregister_dev   = if_cs_unregister_dev;
+       priv->hw_prog_firmware    = if_cs_prog_firmware;
+       priv->hw_host_to_card     = if_cs_host_to_card;
+       priv->hw_get_int_status   = if_cs_get_int_status;
+       priv->hw_read_event_cause = if_cs_read_event_cause;
+
+       /* Now actually get the IRQ */
+       ret = request_irq(p_dev->irq.AssignedIRQ, if_cs_interrupt,
+               IRQF_SHARED, DRV_NAME, card);
+       if (ret) {
+               lbs_pr_err("error in request_irq\n");
+               goto out3;
+       }
+
+       /* And finally bring the card up */
+       if (libertas_activate_card(priv) != 0) {
+               lbs_pr_err("could not activate card\n");
+               goto out3;
+       }
+
+       ret = 0;
+       goto out;
+
+out3:
+       libertas_remove_card(priv);
+out2:
+       ioport_unmap(card->iobase);
+out1:
+       pcmcia_disable_device(p_dev);
+out:
+       lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
+       return ret;
+}
+
+
+/*
+ * This deletes a driver "instance".  The device is de-registered with
+ * Card Services.  If it has been released, all local data structures
+ * are freed.  Otherwise, the structures will be freed when the device
+ * is released.
+ */
+static void if_cs_detach(struct pcmcia_device *p_dev)
+{
+       struct if_cs_card *card = p_dev->priv;
+
+       lbs_deb_enter(LBS_DEB_CS);
+
+       libertas_remove_card(card->priv);
+       if_cs_release(p_dev);
+       kfree(card);
+
+       lbs_deb_leave(LBS_DEB_CS);
+}
+
+
+
+/********************************************************************/
+/* Module initialization                                            */
+/********************************************************************/
+
+static struct pcmcia_device_id if_cs_ids[] = {
+       PCMCIA_DEVICE_MANF_CARD(0x02df, 0x8103),
+       PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, if_cs_ids);
+
+
+static struct pcmcia_driver libertas_driver = {
+       .owner          = THIS_MODULE,
+       .drv            = {
+               .name   = DRV_NAME,
+       },
+       .probe          = if_cs_probe,
+       .remove         = if_cs_detach,
+       .id_table       = if_cs_ids,
+};
+
+
+static int __init if_cs_init(void)
+{
+       int ret;
+
+       lbs_deb_enter(LBS_DEB_CS);
+       ret = pcmcia_register_driver(&libertas_driver);
+       lbs_deb_leave(LBS_DEB_CS);
+       return ret;
+}
+
+
+static void __exit if_cs_exit(void)
+{
+       lbs_deb_enter(LBS_DEB_CS);
+       pcmcia_unregister_driver(&libertas_driver);
+       lbs_deb_leave(LBS_DEB_CS);
+}
+
+
+module_init(if_cs_init);
+module_exit(if_cs_exit);