V4L/DVB (12254): v4l: Makefile and config files for vpfe capture driver

This adds Makefile and Kconfig changes to build vpfe capture driver.

Reviewed by: Laurent Pinchart <laurent.pinchart@skynet.be>

Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index df20283..9b8f79a 100644 (file)
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -527,6 +527,55 @@ config VIDEO_VIVI
          Say Y here if you want to test video apps or debug V4L devices.
          In doubt, say N.
 
+config VIDEO_VPSS_SYSTEM
+       tristate "VPSS System module driver"
+       depends on ARCH_DAVINCI
+       help
+         Support for vpss system module for video driver
+       default y
+
+config VIDEO_VPFE_CAPTURE
+       tristate "VPFE Video Capture Driver"
+       depends on VIDEO_V4L2 && ARCH_DAVINCI
+       select VIDEOBUF_DMA_CONTIG
+       help
+         Support for DMXXXX VPFE based frame grabber. This is the
+         common V4L2 module for following DMXXX SoCs from Texas
+         Instruments:- DM6446 & DM355.
+
+         To compile this driver as a module, choose M here: the
+         module will be called vpfe-capture.
+
+config VIDEO_DM6446_CCDC
+       tristate "DM6446 CCDC HW module"
+       depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE
+       select VIDEO_VPSS_SYSTEM
+       default y
+       help
+          Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
+          with decoder modules such as TVP5146 over BT656 or
+          sensor module such as MT9T001 over a raw interface. This
+          module configures the interface and CCDC/ISIF to do
+          video frame capture from slave decoders.
+
+          To compile this driver as a module, choose M here: the
+          module will be called vpfe.
+
+config VIDEO_DM355_CCDC
+       tristate "DM355 CCDC HW module"
+       depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
+       select VIDEO_VPSS_SYSTEM
+       default y
+       help
+          Enables DM355 CCD hw module. DM355 CCDC hw interfaces
+          with decoder modules such as TVP5146 over BT656 or
+          sensor module such as MT9T001 over a raw interface. This
+          module configures the interface and CCDC/ISIF to do
+          video frame capture from a slave decoders
+
+          To compile this driver as a module, choose M here: the
+          module will be called vpfe.
+
 source "drivers/media/video/bt8xx/Kconfig"
 
 config VIDEO_PMS

diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 70804ca..040bc04 100644 (file)
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -154,6 +154,8 @@ obj-$(CONFIG_VIDEO_MX3)                     += mx3_camera.o
 obj-$(CONFIG_VIDEO_PXA27x)             += pxa_camera.o
 obj-$(CONFIG_VIDEO_SH_MOBILE_CEU)      += sh_mobile_ceu_camera.o
 
+obj-$(CONFIG_ARCH_DAVINCI)             += davinci/
+
 obj-$(CONFIG_VIDEO_AU0828) += au0828/
 
 obj-$(CONFIG_USB_VIDEO_CLASS)  += uvc/

diff --git a/drivers/media/video/davinci/Makefile b/drivers/media/video/davinci/Makefile
index 7fe9bce..f44cad2 100644 (file)
--- a/drivers/media/video/davinci/Makefile
+++ b/drivers/media/video/davinci/Makefile
@@ -7,3 +7,9 @@ obj-$(CONFIG_VIDEO_DAVINCI_VPIF) += vpif.o
 
 #DM646x EVM Display driver
 obj-$(CONFIG_DISPLAY_DAVINCI_DM646X_EVM) += vpif_display.o
+
+# Capture: DM6446 and DM355
+obj-$(CONFIG_VIDEO_VPSS_SYSTEM) += vpss.o
+obj-$(CONFIG_VIDEO_VPFE_CAPTURE) += vpfe_capture.o
+obj-$(CONFIG_VIDEO_DM6446_CCDC) += dm644x_ccdc.o
+obj-$(CONFIG_VIDEO_DM355_CCDC) += dm355_ccdc.o