siimage: remove proc_reports_siimage()

* proc_reports_siimage() is now only called by init_chipset_siimage()
  so inline it there.

* Use array instead of switch statement for reporting clock modes.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index cf8a759..590ce7b 100644 (file)
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -439,30 +439,6 @@ static void sil_sata_pre_reset(ide_drive_t *drive)
        }
 }
 
-/**
- *     proc_reports_siimage            -       add siimage controller to proc
- *     @dev: PCI device
- *     @clocking: SCSC value
- *     @name: controller name
- *
- *     Report the clocking mode of the controller and add it to
- *     the /proc interface layer
- */
- 
-static void proc_reports_siimage (struct pci_dev *dev, u8 clocking, const char *name)
-{
-       if (!pdev_is_sata(dev)) {
-               printk(KERN_INFO "%s: BASE CLOCK ", name);
-               clocking &= 0x03;
-               switch (clocking) {
-                       case 0x03: printk("DISABLED!\n"); break;
-                       case 0x02: printk("== 2X PCI\n"); break;
-                       case 0x01: printk("== 133\n"); break;
-                       case 0x00: printk("== 100\n"); break;
-               }
-       }
-}
-
 /**
  *     setup_mmio_siimage      -       switch an SI controller into MMIO
  *     @dev: PCI device we are configuring
@@ -585,7 +561,14 @@ static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev, const ch
                writel(0x00680000, ioaddr + 0x1C8);
        }
 
-       proc_reports_siimage(dev, tmp >> 4, name);
+       /* report the clocking mode of the controller */
+       if (!pdev_is_sata(dev)) {
+               static const char *clk_str[] =
+                       { "== 100", "== 133", "== 2X PCI", "DISABLED!" };
+
+               tmp >>= 4;
+               printk(KERN_INFO "%s: BASE CLOCK %s\n", name, clk_str[tmp & 3]);
+       }
 
        return 0;
 }