[PATCH] e100: Fix TX hang and RMCP Ping issue (due to a microcode loading issue)

e100: Fix TX hang and RMCP Ping issue (due to a microcode loading issue)

Set the end of list bit to cause the hardware's transmit state machine to
work correctly and not prevent management (BMC) traffic.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 4726722..67b9935 100644 (file)
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -160,7 +160,7 @@
 
 #define DRV_NAME               "e100"
 #define DRV_EXT                "-NAPI"
-#define DRV_VERSION            "3.4.14-k4"DRV_EXT
+#define DRV_VERSION            "3.5.10-k2"DRV_EXT
 #define DRV_DESCRIPTION                "Intel(R) PRO/100 Network Driver"
 #define DRV_COPYRIGHT          "Copyright(c) 1999-2005 Intel Corporation"
 #define PFX                    DRV_NAME ": "
@@ -1170,7 +1170,7 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 0x00000000, 0x00000000, 0x00000000, 0x00000000, \
 }
 
-static void e100_load_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+static void e100_setup_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 {
 /* *INDENT-OFF* */
        static struct {
@@ -1284,12 +1284,46 @@ static void e100_load_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 
                for (i = 0; i < UCODE_SIZE; i++)
                        cb->u.ucode[i] = cpu_to_le32(ucode[i]);
-               cb->command = cpu_to_le16(cb_ucode);
+               cb->command = cpu_to_le16(cb_ucode | cb_el);
                return;
        }
 
 noloaducode:
-       cb->command = cpu_to_le16(cb_nop);
+       cb->command = cpu_to_le16(cb_nop | cb_el);
+}
+
+static inline int e100_exec_cb_wait(struct nic *nic, struct sk_buff *skb,
+       void (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *))
+{
+       int err = 0, counter = 50;
+       struct cb *cb = nic->cb_to_clean;
+
+       if ((err = e100_exec_cb(nic, NULL, e100_setup_ucode)))
+               DPRINTK(PROBE,ERR, "ucode cmd failed with error %d\n", err);
+               
+       /* must restart cuc */
+       nic->cuc_cmd = cuc_start;
+
+       /* wait for completion */
+       e100_write_flush(nic);
+       udelay(10);
+
+       /* wait for possibly (ouch) 500ms */
+       while (!(cb->status & cpu_to_le16(cb_complete))) {
+               msleep(10);
+               if (!--counter) break;
+       }
+       
+       /* ack any interupts, something could have been set */
+       writeb(~0, &nic->csr->scb.stat_ack);
+
+       /* if the command failed, or is not OK, notify and return */
+       if (!counter || !(cb->status & cpu_to_le16(cb_ok))) {
+               DPRINTK(PROBE,ERR, "ucode load failed\n");
+               err = -EPERM;
+       }
+       
+       return err;
 }
 
 static void e100_setup_iaaddr(struct nic *nic, struct cb *cb,
@@ -1388,7 +1422,7 @@ static int e100_hw_init(struct nic *nic)
                return err;
        if((err = e100_exec_cmd(nic, ruc_load_base, 0)))
                return err;
-       if((err = e100_exec_cb(nic, NULL, e100_load_ucode)))
+       if ((err = e100_exec_cb_wait(nic, NULL, e100_setup_ucode)))
                return err;
        if((err = e100_exec_cb(nic, NULL, e100_configure)))
                return err;