xfs simplify and speed up direct I/O completions
authorChristoph Hellwig <hch@infradead.org>
Sun, 18 Jul 2010 21:17:11 +0000 (21:17 +0000)
committerAlex Elder <aelder@sgi.com>
Mon, 26 Jul 2010 21:09:19 +0000 (16:09 -0500)
Our current handling of direct I/O completions is rather suboptimal,
because we defer it to a workqueue more often than needed, and we
perform a much to aggressive flush of the workqueue in case unwritten
extent conversions happen.

This patch changes the direct I/O reads to not even use a completion
handler, as we don't bother to use it at all, and to perform the unwritten
extent conversions in caller context for synchronous direct I/O.

For a small I/O size direct I/O workload on a consumer grade SSD, such as
the untar of a kernel tree inside qemu this patch gives speedups of
about 5%.  Getting us much closer to the speed of a native block device,
or a fully allocated XFS file.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
fs/xfs/linux-2.6/xfs_aops.c

index 13622d5..d24e78f 100644 (file)
@@ -202,23 +202,17 @@ xfs_setfilesize(
 }
 
 /*
- * Schedule IO completion handling on a xfsdatad if this was
- * the final hold on this ioend. If we are asked to wait,
- * flush the workqueue.
+ * Schedule IO completion handling on the final put of an ioend.
  */
 STATIC void
 xfs_finish_ioend(
-       xfs_ioend_t     *ioend,
-       int             wait)
+       struct xfs_ioend        *ioend)
 {
        if (atomic_dec_and_test(&ioend->io_remaining)) {
-               struct workqueue_struct *wq;
-
-               wq = (ioend->io_type == IO_UNWRITTEN) ?
-                       xfsconvertd_workqueue : xfsdatad_workqueue;
-               queue_work(wq, &ioend->io_work);
-               if (wait)
-                       flush_workqueue(wq);
+               if (ioend->io_type == IO_UNWRITTEN)
+                       queue_work(xfsconvertd_workqueue, &ioend->io_work);
+               else
+                       queue_work(xfsdatad_workqueue, &ioend->io_work);
        }
 }
 
@@ -262,7 +256,7 @@ xfs_end_io(
         */
        if (error == EAGAIN) {
                atomic_inc(&ioend->io_remaining);
-               xfs_finish_ioend(ioend, 0);
+               xfs_finish_ioend(ioend);
                /* ensure we don't spin on blocked ioends */
                delay(1);
        } else {
@@ -272,6 +266,17 @@ xfs_end_io(
        }
 }
 
+/*
+ * Call IO completion handling in caller context on the final put of an ioend.
+ */
+STATIC void
+xfs_finish_ioend_sync(
+       struct xfs_ioend        *ioend)
+{
+       if (atomic_dec_and_test(&ioend->io_remaining))
+               xfs_end_io(&ioend->io_work);
+}
+
 /*
  * Allocate and initialise an IO completion structure.
  * We need to track unwritten extent write completion here initially.
@@ -353,7 +358,7 @@ xfs_end_bio(
        bio->bi_end_io = NULL;
        bio_put(bio);
 
-       xfs_finish_ioend(ioend, 0);
+       xfs_finish_ioend(ioend);
 }
 
 STATIC void
@@ -495,7 +500,7 @@ xfs_submit_ioend(
                }
                if (bio)
                        xfs_submit_ioend_bio(wbc, ioend, bio);
-               xfs_finish_ioend(ioend, 0);
+               xfs_finish_ioend(ioend);
        } while ((ioend = next) != NULL);
 }
 
@@ -1406,70 +1411,56 @@ xfs_get_blocks_direct(
        return __xfs_get_blocks(inode, iblock, bh_result, create, 1);
 }
 
+/*
+ * Complete a direct I/O write request.
+ *
+ * If the private argument is non-NULL __xfs_get_blocks signals us that we
+ * need to issue a transaction to convert the range from unwritten to written
+ * extents.  In case this is regular synchronous I/O we just call xfs_end_io
+ * to do this and we are done.  But in case this was a successfull AIO
+ * request this handler is called from interrupt context, from which we
+ * can't start transactions.  In that case offload the I/O completion to
+ * the workqueues we also use for buffered I/O completion.
+ */
 STATIC void
-xfs_end_io_direct(
-       struct kiocb    *iocb,
-       loff_t          offset,
-       ssize_t         size,
-       void            *private,
-       int             ret,
-       bool            is_async)
+xfs_end_io_direct_write(
+       struct kiocb            *iocb,
+       loff_t                  offset,
+       ssize_t                 size,
+       void                    *private,
+       int                     ret,
+       bool                    is_async)
 {
-       xfs_ioend_t     *ioend = iocb->private;
-       bool            complete_aio = is_async;
+       struct xfs_ioend        *ioend = iocb->private;
 
        /*
-        * Non-NULL private data means we need to issue a transaction to
-        * convert a range from unwritten to written extents.  This needs
-        * to happen from process context but aio+dio I/O completion
-        * happens from irq context so we need to defer it to a workqueue.
-        * This is not necessary for synchronous direct I/O, but we do
-        * it anyway to keep the code uniform and simpler.
-        *
-        * Well, if only it were that simple. Because synchronous direct I/O
-        * requires extent conversion to occur *before* we return to userspace,
-        * we have to wait for extent conversion to complete. Look at the
-        * iocb that has been passed to us to determine if this is AIO or
-        * not. If it is synchronous, tell xfs_finish_ioend() to kick the
-        * workqueue and wait for it to complete.
-        *
-        * The core direct I/O code might be changed to always call the
-        * completion handler in the future, in which case all this can
-        * go away.
+        * blockdev_direct_IO can return an error even after the I/O
+        * completion handler was called.  Thus we need to protect
+        * against double-freeing.
         */
+       iocb->private = NULL;
+
        ioend->io_offset = offset;
        ioend->io_size = size;
-       if (ioend->io_type == IO_READ) {
-               xfs_finish_ioend(ioend, 0);
-       } else if (private && size > 0) {
-               if (is_async) {
+       if (private && size > 0)
+               ioend->io_type = IO_UNWRITTEN;
+
+       if (is_async) {
+               /*
+                * If we are converting an unwritten extent we need to delay
+                * the AIO completion until after the unwrittent extent
+                * conversion has completed, otherwise do it ASAP.
+                */
+               if (ioend->io_type == IO_UNWRITTEN) {
                        ioend->io_iocb = iocb;
                        ioend->io_result = ret;
-                       complete_aio = false;
-                       xfs_finish_ioend(ioend, 0);
                } else {
-                       xfs_finish_ioend(ioend, 1);
+                       aio_complete(iocb, ret, 0);
                }
+               xfs_finish_ioend(ioend);
        } else {
-               /*
-                * A direct I/O write ioend starts it's life in unwritten
-                * state in case they map an unwritten extent.  This write
-                * didn't map an unwritten extent so switch it's completion
-                * handler.
-                */
-               ioend->io_type = IO_NEW;
-               xfs_finish_ioend(ioend, 0);
+               xfs_finish_ioend_sync(ioend);
        }
-
-       /*
-        * blockdev_direct_IO can return an error even after the I/O
-        * completion handler was called.  Thus we need to protect
-        * against double-freeing.
-        */
-       iocb->private = NULL;
-
-       if (complete_aio)
-               aio_complete(iocb, ret, 0);
 }
 
 STATIC ssize_t
@@ -1480,23 +1471,26 @@ xfs_vm_direct_IO(
        loff_t                  offset,
        unsigned long           nr_segs)
 {
-       struct file     *file = iocb->ki_filp;
-       struct inode    *inode = file->f_mapping->host;
-       struct block_device *bdev;
-       ssize_t         ret;
-
-       bdev = xfs_find_bdev_for_inode(inode);
-
-       iocb->private = xfs_alloc_ioend(inode, rw == WRITE ?
-                                       IO_UNWRITTEN : IO_READ);
-
-       ret = blockdev_direct_IO_no_locking(rw, iocb, inode, bdev, iov,
-                                           offset, nr_segs,
-                                           xfs_get_blocks_direct,
-                                           xfs_end_io_direct);
+       struct inode            *inode = iocb->ki_filp->f_mapping->host;
+       struct block_device     *bdev = xfs_find_bdev_for_inode(inode);
+       ssize_t                 ret;
+
+       if (rw & WRITE) {
+               iocb->private = xfs_alloc_ioend(inode, IO_NEW);
+
+               ret = blockdev_direct_IO_no_locking(rw, iocb, inode, bdev, iov,
+                                                   offset, nr_segs,
+                                                   xfs_get_blocks_direct,
+                                                   xfs_end_io_direct_write);
+               if (ret != -EIOCBQUEUED && iocb->private)
+                       xfs_destroy_ioend(iocb->private);
+       } else {
+               ret = blockdev_direct_IO_no_locking(rw, iocb, inode, bdev, iov,
+                                                   offset, nr_segs,
+                                                   xfs_get_blocks_direct,
+                                                   NULL);
+       }
 
-       if (unlikely(ret != -EIOCBQUEUED && iocb->private))
-               xfs_destroy_ioend(iocb->private);
        return ret;
 }