interrupt-parent = <&mpc5200_pic>;
};
- pci@0d00 {
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- compatible = "mpc5200-pci";
- reg = <d00 100>;
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3
- c000 0 0 2 &mpc5200_pic 0 0 3
- c000 0 0 3 &mpc5200_pic 0 0 3
- c000 0 0 4 &mpc5200_pic 0 0 3>;
- clock-frequency = <0>; // From boot loader
- interrupts = <2 8 0 2 9 0 2 a 0>;
- interrupt-parent = <&mpc5200_pic>;
- bus-range = <0 0>;
- ranges = <42000000 0 80000000 80000000 0 20000000
- 02000000 0 a0000000 a0000000 0 10000000
- 01000000 0 00000000 b0000000 0 01000000>;
- };
-
spi@f00 {
device_type = "spi";
compatible = "mpc5200-spi";
reg = <8000 4000>;
};
};
+
+ pci@f0000d00 {
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ compatible = "mpc5200-pci";
+ reg = <f0000d00 100>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3
+ c000 0 0 2 &mpc5200_pic 0 0 3
+ c000 0 0 3 &mpc5200_pic 0 0 3
+ c000 0 0 4 &mpc5200_pic 0 0 3>;
+ clock-frequency = <0>; // From boot loader
+ interrupts = <2 8 0 2 9 0 2 a 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ bus-range = <0 0>;
+ ranges = <42000000 0 80000000 80000000 0 20000000
+ 02000000 0 a0000000 a0000000 0 10000000
+ 01000000 0 00000000 b0000000 0 01000000>;
+ };
};
interrupt-parent = <&mpc5200_pic>;
};
- pci@0d00 {
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- compatible = "mpc5200b-pci\0mpc5200-pci";
- reg = <d00 100>;
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
- c000 0 0 2 &mpc5200_pic 1 1 3
- c000 0 0 3 &mpc5200_pic 1 2 3
- c000 0 0 4 &mpc5200_pic 1 3 3
-
- c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
- c800 0 0 2 &mpc5200_pic 1 2 3
- c800 0 0 3 &mpc5200_pic 1 3 3
- c800 0 0 4 &mpc5200_pic 0 0 3>;
- clock-frequency = <0>; // From boot loader
- interrupts = <2 8 0 2 9 0 2 a 0>;
- interrupt-parent = <&mpc5200_pic>;
- bus-range = <0 0>;
- ranges = <42000000 0 80000000 80000000 0 20000000
- 02000000 0 a0000000 a0000000 0 10000000
- 01000000 0 00000000 b0000000 0 01000000>;
- };
-
spi@f00 {
device_type = "spi";
compatible = "mpc5200b-spi\0mpc5200-spi";
reg = <8000 4000>;
};
};
+
+ pci@f0000d00 {
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ compatible = "mpc5200b-pci\0mpc5200-pci";
+ reg = <f0000d00 100>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
+ c000 0 0 2 &mpc5200_pic 1 1 3
+ c000 0 0 3 &mpc5200_pic 1 2 3
+ c000 0 0 4 &mpc5200_pic 1 3 3
+
+ c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
+ c800 0 0 2 &mpc5200_pic 1 2 3
+ c800 0 0 3 &mpc5200_pic 1 3 3
+ c800 0 0 4 &mpc5200_pic 0 0 3>;
+ clock-frequency = <0>; // From boot loader
+ interrupts = <2 8 0 2 9 0 2 a 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ bus-range = <0 0>;
+ ranges = <42000000 0 80000000 80000000 0 20000000
+ 02000000 0 a0000000 a0000000 0 10000000
+ 01000000 0 00000000 b0000000 0 01000000>;
+ };
};
interrupt-parent = < &ipic >;
};
- pci@8500 {
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
-
- /* IDSEL 0x0E -mini PCI */
- 7000 0 0 1 &ipic 12 8
- 7000 0 0 2 &ipic 12 8
- 7000 0 0 3 &ipic 12 8
- 7000 0 0 4 &ipic 12 8
-
- /* IDSEL 0x0F - PCI slot */
- 7800 0 0 1 &ipic 11 8
- 7800 0 0 2 &ipic 12 8
- 7800 0 0 3 &ipic 11 8
- 7800 0 0 4 &ipic 12 8>;
- interrupt-parent = < &ipic >;
- interrupts = <42 8>;
- bus-range = <0 0>;
- ranges = <02000000 0 90000000 90000000 0 10000000
- 42000000 0 80000000 80000000 0 10000000
- 01000000 0 00000000 e2000000 0 00100000>;
- clock-frequency = <3f940aa>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <8500 100>;
- compatible = "fsl,mpc8349-pci";
- device_type = "pci";
- };
-
crypto@30000 {
device_type = "crypto";
model = "SEC2";
device_type = "ipic";
};
};
+
+ pci@e0008500 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x0E -mini PCI */
+ 7000 0 0 1 &ipic 12 8
+ 7000 0 0 2 &ipic 12 8
+ 7000 0 0 3 &ipic 12 8
+ 7000 0 0 4 &ipic 12 8
+
+ /* IDSEL 0x0F - PCI slot */
+ 7800 0 0 1 &ipic 11 8
+ 7800 0 0 2 &ipic 12 8
+ 7800 0 0 3 &ipic 11 8
+ 7800 0 0 4 &ipic 12 8>;
+ interrupt-parent = < &ipic >;
+ interrupts = <42 8>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 90000000 90000000 0 10000000
+ 42000000 0 80000000 80000000 0 10000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e0008500 100>;
+ compatible = "fsl,mpc8349-pci";
+ device_type = "pci";
+ };
};
descriptor-types-mask = <0122003f>;
};
- pci@8500 {
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x11 AD17 */
- 8800 0 0 1 &ipic 14 8
- 8800 0 0 2 &ipic 15 8
- 8800 0 0 3 &ipic 16 8
- 8800 0 0 4 &ipic 17 8
-
- /* IDSEL 0x12 AD18 */
- 9000 0 0 1 &ipic 16 8
- 9000 0 0 2 &ipic 17 8
- 9000 0 0 3 &ipic 14 8
- 9000 0 0 4 &ipic 15 8
-
- /* IDSEL 0x13 AD19 */
- 9800 0 0 1 &ipic 17 8
- 9800 0 0 2 &ipic 14 8
- 9800 0 0 3 &ipic 15 8
- 9800 0 0 4 &ipic 16 8
-
- /* IDSEL 0x15 AD21*/
- a800 0 0 1 &ipic 14 8
- a800 0 0 2 &ipic 15 8
- a800 0 0 3 &ipic 16 8
- a800 0 0 4 &ipic 17 8
-
- /* IDSEL 0x16 AD22*/
- b000 0 0 1 &ipic 17 8
- b000 0 0 2 &ipic 14 8
- b000 0 0 3 &ipic 15 8
- b000 0 0 4 &ipic 16 8
-
- /* IDSEL 0x17 AD23*/
- b800 0 0 1 &ipic 16 8
- b800 0 0 2 &ipic 17 8
- b800 0 0 3 &ipic 14 8
- b800 0 0 4 &ipic 15 8
-
- /* IDSEL 0x18 AD24*/
- c000 0 0 1 &ipic 15 8
- c000 0 0 2 &ipic 16 8
- c000 0 0 3 &ipic 17 8
- c000 0 0 4 &ipic 14 8>;
- interrupt-parent = < &ipic >;
- interrupts = <42 8>;
- bus-range = <0 0>;
- ranges = <02000000 0 90000000 90000000 0 10000000
- 42000000 0 80000000 80000000 0 10000000
- 01000000 0 00000000 d0000000 0 00100000>;
- clock-frequency = <0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <8500 100>;
- compatible = "fsl,mpc8349-pci";
- device_type = "pci";
- };
-
ipic: pic@700 {
interrupt-controller;
#address-cells = <0>;
interrupt-parent = < &ipic >;
};
};
+
+ pci@e0008500 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x11 AD17 */
+ 8800 0 0 1 &ipic 14 8
+ 8800 0 0 2 &ipic 15 8
+ 8800 0 0 3 &ipic 16 8
+ 8800 0 0 4 &ipic 17 8
+
+ /* IDSEL 0x12 AD18 */
+ 9000 0 0 1 &ipic 16 8
+ 9000 0 0 2 &ipic 17 8
+ 9000 0 0 3 &ipic 14 8
+ 9000 0 0 4 &ipic 15 8
+
+ /* IDSEL 0x13 AD19 */
+ 9800 0 0 1 &ipic 17 8
+ 9800 0 0 2 &ipic 14 8
+ 9800 0 0 3 &ipic 15 8
+ 9800 0 0 4 &ipic 16 8
+
+ /* IDSEL 0x15 AD21*/
+ a800 0 0 1 &ipic 14 8
+ a800 0 0 2 &ipic 15 8
+ a800 0 0 3 &ipic 16 8
+ a800 0 0 4 &ipic 17 8
+
+ /* IDSEL 0x16 AD22*/
+ b000 0 0 1 &ipic 17 8
+ b000 0 0 2 &ipic 14 8
+ b000 0 0 3 &ipic 15 8
+ b000 0 0 4 &ipic 16 8
+
+ /* IDSEL 0x17 AD23*/
+ b800 0 0 1 &ipic 16 8
+ b800 0 0 2 &ipic 17 8
+ b800 0 0 3 &ipic 14 8
+ b800 0 0 4 &ipic 15 8
+
+ /* IDSEL 0x18 AD24*/
+ c000 0 0 1 &ipic 15 8
+ c000 0 0 2 &ipic 16 8
+ c000 0 0 3 &ipic 17 8
+ c000 0 0 4 &ipic 14 8>;
+ interrupt-parent = < &ipic >;
+ interrupts = <42 8>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 90000000 90000000 0 10000000
+ 42000000 0 80000000 80000000 0 10000000
+ 01000000 0 00000000 d0000000 0 00100000>;
+ clock-frequency = <0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e0008500 100>;
+ compatible = "fsl,mpc8349-pci";
+ device_type = "pci";
+ };
};
descriptor-types-mask = <0122003f>;
};
- pci@8500 {
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x10 AD16 (USB) */
- 8000 0 0 1 &pic 11 8
-
- /* IDSEL 0x11 AD17 (Mini1)*/
- 8800 0 0 1 &pic 12 8
- 8800 0 0 2 &pic 13 8
- 8800 0 0 3 &pic 14 8
- 8800 0 0 4 &pic 30 8
-
- /* IDSEL 0x12 AD18 (PCI/Mini2) */
- 9000 0 0 1 &pic 13 8
- 9000 0 0 2 &pic 14 8
- 9000 0 0 3 &pic 30 8
- 9000 0 0 4 &pic 11 8>;
-
- interrupt-parent = <&pic>;
- interrupts = <42 8>;
- bus-range = <0 0>;
- ranges = <42000000 0 80000000 80000000 0 10000000
- 02000000 0 90000000 90000000 0 10000000
- 01000000 0 d0000000 d0000000 0 04000000>;
- clock-frequency = <0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <8500 100>;
- compatible = "fsl,mpc8349-pci";
- device_type = "pci";
- };
-
pic:pic@700 {
interrupt-controller;
#address-cells = <0>;
interrupt-parent = <&pic>;
};
};
+
+ pci@e0008500 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x10 AD16 (USB) */
+ 8000 0 0 1 &pic 11 8
+
+ /* IDSEL 0x11 AD17 (Mini1)*/
+ 8800 0 0 1 &pic 12 8
+ 8800 0 0 2 &pic 13 8
+ 8800 0 0 3 &pic 14 8
+ 8800 0 0 4 &pic 30 8
+
+ /* IDSEL 0x12 AD18 (PCI/Mini2) */
+ 9000 0 0 1 &pic 13 8
+ 9000 0 0 2 &pic 14 8
+ 9000 0 0 3 &pic 30 8
+ 9000 0 0 4 &pic 11 8>;
+
+ interrupt-parent = <&pic>;
+ interrupts = <42 8>;
+ bus-range = <0 0>;
+ ranges = <42000000 0 80000000 80000000 0 10000000
+ 02000000 0 90000000 90000000 0 10000000
+ 01000000 0 d0000000 d0000000 0 04000000>;
+ clock-frequency = <0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e0008500 100>;
+ compatible = "fsl,mpc8349-pci";
+ device_type = "pci";
+ };
};
interrupt-parent = < &ipic >;
};
- pci@8500 {
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x10 - SATA */
- 8000 0 0 1 &ipic 16 8 /* SATA_INTA */
- >;
- interrupt-parent = < &ipic >;
- interrupts = <42 8>;
- bus-range = <0 0>;
- ranges = <42000000 0 80000000 80000000 0 10000000
- 02000000 0 90000000 90000000 0 10000000
- 01000000 0 00000000 e2000000 0 01000000>;
- clock-frequency = <3f940aa>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <8500 100>;
- compatible = "fsl,mpc8349-pci";
- device_type = "pci";
- };
-
- pci@8600 {
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0E - MiniPCI Slot */
- 7000 0 0 1 &ipic 15 8 /* PCI_INTA */
-
- /* IDSEL 0x0F - PCI Slot */
- 7800 0 0 1 &ipic 14 8 /* PCI_INTA */
- 7800 0 0 2 &ipic 15 8 /* PCI_INTB */
- >;
- interrupt-parent = < &ipic >;
- interrupts = <43 8>;
- bus-range = <1 1>;
- ranges = <42000000 0 a0000000 a0000000 0 10000000
- 02000000 0 b0000000 b0000000 0 10000000
- 01000000 0 00000000 e3000000 0 01000000>;
- clock-frequency = <3f940aa>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <8600 100>;
- compatible = "fsl,mpc8349-pci";
- device_type = "pci";
- };
-
crypto@30000 {
device_type = "crypto";
model = "SEC2";
device_type = "ipic";
};
};
+
+ pci@e0008500 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x10 - SATA */
+ 8000 0 0 1 &ipic 16 8 /* SATA_INTA */
+ >;
+ interrupt-parent = < &ipic >;
+ interrupts = <42 8>;
+ bus-range = <0 0>;
+ ranges = <42000000 0 80000000 80000000 0 10000000
+ 02000000 0 90000000 90000000 0 10000000
+ 01000000 0 00000000 e2000000 0 01000000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e0008500 100>;
+ compatible = "fsl,mpc8349-pci";
+ device_type = "pci";
+ };
+
+ pci@e0008600 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0E - MiniPCI Slot */
+ 7000 0 0 1 &ipic 15 8 /* PCI_INTA */
+
+ /* IDSEL 0x0F - PCI Slot */
+ 7800 0 0 1 &ipic 14 8 /* PCI_INTA */
+ 7800 0 0 2 &ipic 15 8 /* PCI_INTB */
+ >;
+ interrupt-parent = < &ipic >;
+ interrupts = <43 8>;
+ bus-range = <0 0>;
+ ranges = <42000000 0 a0000000 a0000000 0 10000000
+ 02000000 0 b0000000 b0000000 0 10000000
+ 01000000 0 00000000 e3000000 0 01000000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e0008600 100>;
+ compatible = "fsl,mpc8349-pci";
+ device_type = "pci";
+ };
+
+
+
};
interrupt-parent = < &ipic >;
};
- pci@8600 {
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0F - PCI Slot */
- 7800 0 0 1 &ipic 14 8 /* PCI_INTA */
- 7800 0 0 2 &ipic 15 8 /* PCI_INTB */
- >;
- interrupt-parent = < &ipic >;
- interrupts = <43 8>;
- bus-range = <1 1>;
- ranges = <42000000 0 a0000000 a0000000 0 10000000
- 02000000 0 b0000000 b0000000 0 10000000
- 01000000 0 00000000 e3000000 0 01000000>;
- clock-frequency = <3f940aa>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <8600 100>;
- compatible = "fsl,mpc8349-pci";
- device_type = "pci";
- };
-
crypto@30000 {
device_type = "crypto";
model = "SEC2";
device_type = "ipic";
};
};
+
+ pci@e0008600 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0F - PCI Slot */
+ 7800 0 0 1 &ipic 14 8 /* PCI_INTA */
+ 7800 0 0 2 &ipic 15 8 /* PCI_INTB */
+ >;
+ interrupt-parent = < &ipic >;
+ interrupts = <43 8>;
+ bus-range = <1 1>;
+ ranges = <42000000 0 a0000000 a0000000 0 10000000
+ 02000000 0 b0000000 b0000000 0 10000000
+ 01000000 0 00000000 e3000000 0 01000000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e0008600 100>;
+ compatible = "fsl,mpc8349-pci";
+ device_type = "pci";
+ };
};
interrupt-parent = < &ipic >;
};
- pci@8500 {
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
-
- /* IDSEL 0x11 */
- 8800 0 0 1 &ipic 14 8
- 8800 0 0 2 &ipic 15 8
- 8800 0 0 3 &ipic 16 8
- 8800 0 0 4 &ipic 17 8
-
- /* IDSEL 0x12 */
- 9000 0 0 1 &ipic 16 8
- 9000 0 0 2 &ipic 17 8
- 9000 0 0 3 &ipic 14 8
- 9000 0 0 4 &ipic 15 8
-
- /* IDSEL 0x13 */
- 9800 0 0 1 &ipic 17 8
- 9800 0 0 2 &ipic 14 8
- 9800 0 0 3 &ipic 15 8
- 9800 0 0 4 &ipic 16 8
-
- /* IDSEL 0x15 */
- a800 0 0 1 &ipic 14 8
- a800 0 0 2 &ipic 15 8
- a800 0 0 3 &ipic 16 8
- a800 0 0 4 &ipic 17 8
-
- /* IDSEL 0x16 */
- b000 0 0 1 &ipic 17 8
- b000 0 0 2 &ipic 14 8
- b000 0 0 3 &ipic 15 8
- b000 0 0 4 &ipic 16 8
-
- /* IDSEL 0x17 */
- b800 0 0 1 &ipic 16 8
- b800 0 0 2 &ipic 17 8
- b800 0 0 3 &ipic 14 8
- b800 0 0 4 &ipic 15 8
-
- /* IDSEL 0x18 */
- c000 0 0 1 &ipic 15 8
- c000 0 0 2 &ipic 16 8
- c000 0 0 3 &ipic 17 8
- c000 0 0 4 &ipic 14 8>;
- interrupt-parent = < &ipic >;
- interrupts = <42 8>;
- bus-range = <0 0>;
- ranges = <02000000 0 90000000 90000000 0 10000000
- 42000000 0 80000000 80000000 0 10000000
- 01000000 0 00000000 e2000000 0 00100000>;
- clock-frequency = <3f940aa>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <8500 100>;
- compatible = "fsl,mpc8349-pci";
- device_type = "pci";
- };
-
- pci@8600 {
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
-
- /* IDSEL 0x11 */
- 8800 0 0 1 &ipic 14 8
- 8800 0 0 2 &ipic 15 8
- 8800 0 0 3 &ipic 16 8
- 8800 0 0 4 &ipic 17 8
-
- /* IDSEL 0x12 */
- 9000 0 0 1 &ipic 16 8
- 9000 0 0 2 &ipic 17 8
- 9000 0 0 3 &ipic 14 8
- 9000 0 0 4 &ipic 15 8
-
- /* IDSEL 0x13 */
- 9800 0 0 1 &ipic 17 8
- 9800 0 0 2 &ipic 14 8
- 9800 0 0 3 &ipic 15 8
- 9800 0 0 4 &ipic 16 8
-
- /* IDSEL 0x15 */
- a800 0 0 1 &ipic 14 8
- a800 0 0 2 &ipic 15 8
- a800 0 0 3 &ipic 16 8
- a800 0 0 4 &ipic 17 8
-
- /* IDSEL 0x16 */
- b000 0 0 1 &ipic 17 8
- b000 0 0 2 &ipic 14 8
- b000 0 0 3 &ipic 15 8
- b000 0 0 4 &ipic 16 8
-
- /* IDSEL 0x17 */
- b800 0 0 1 &ipic 16 8
- b800 0 0 2 &ipic 17 8
- b800 0 0 3 &ipic 14 8
- b800 0 0 4 &ipic 15 8
-
- /* IDSEL 0x18 */
- c000 0 0 1 &ipic 15 8
- c000 0 0 2 &ipic 16 8
- c000 0 0 3 &ipic 17 8
- c000 0 0 4 &ipic 14 8>;
- interrupt-parent = < &ipic >;
- interrupts = <42 8>;
- bus-range = <0 0>;
- ranges = <02000000 0 b0000000 b0000000 0 10000000
- 42000000 0 a0000000 a0000000 0 10000000
- 01000000 0 00000000 e2100000 0 00100000>;
- clock-frequency = <3f940aa>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <8600 100>;
- compatible = "fsl,mpc8349-pci";
- device_type = "pci";
- };
-
/* May need to remove if on a part without crypto engine */
crypto@30000 {
device_type = "crypto";
device_type = "ipic";
};
};
+
+ pci@e0008500 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x11 */
+ 8800 0 0 1 &ipic 14 8
+ 8800 0 0 2 &ipic 15 8
+ 8800 0 0 3 &ipic 16 8
+ 8800 0 0 4 &ipic 17 8
+
+ /* IDSEL 0x12 */
+ 9000 0 0 1 &ipic 16 8
+ 9000 0 0 2 &ipic 17 8
+ 9000 0 0 3 &ipic 14 8
+ 9000 0 0 4 &ipic 15 8
+
+ /* IDSEL 0x13 */
+ 9800 0 0 1 &ipic 17 8
+ 9800 0 0 2 &ipic 14 8
+ 9800 0 0 3 &ipic 15 8
+ 9800 0 0 4 &ipic 16 8
+
+ /* IDSEL 0x15 */
+ a800 0 0 1 &ipic 14 8
+ a800 0 0 2 &ipic 15 8
+ a800 0 0 3 &ipic 16 8
+ a800 0 0 4 &ipic 17 8
+
+ /* IDSEL 0x16 */
+ b000 0 0 1 &ipic 17 8
+ b000 0 0 2 &ipic 14 8
+ b000 0 0 3 &ipic 15 8
+ b000 0 0 4 &ipic 16 8
+
+ /* IDSEL 0x17 */
+ b800 0 0 1 &ipic 16 8
+ b800 0 0 2 &ipic 17 8
+ b800 0 0 3 &ipic 14 8
+ b800 0 0 4 &ipic 15 8
+
+ /* IDSEL 0x18 */
+ c000 0 0 1 &ipic 15 8
+ c000 0 0 2 &ipic 16 8
+ c000 0 0 3 &ipic 17 8
+ c000 0 0 4 &ipic 14 8>;
+ interrupt-parent = < &ipic >;
+ interrupts = <42 8>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 90000000 90000000 0 10000000
+ 42000000 0 80000000 80000000 0 10000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e0008500 100>;
+ compatible = "fsl,mpc8349-pci";
+ device_type = "pci";
+ };
+
+ pci@e0008600 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x11 */
+ 8800 0 0 1 &ipic 14 8
+ 8800 0 0 2 &ipic 15 8
+ 8800 0 0 3 &ipic 16 8
+ 8800 0 0 4 &ipic 17 8
+
+ /* IDSEL 0x12 */
+ 9000 0 0 1 &ipic 16 8
+ 9000 0 0 2 &ipic 17 8
+ 9000 0 0 3 &ipic 14 8
+ 9000 0 0 4 &ipic 15 8
+
+ /* IDSEL 0x13 */
+ 9800 0 0 1 &ipic 17 8
+ 9800 0 0 2 &ipic 14 8
+ 9800 0 0 3 &ipic 15 8
+ 9800 0 0 4 &ipic 16 8
+
+ /* IDSEL 0x15 */
+ a800 0 0 1 &ipic 14 8
+ a800 0 0 2 &ipic 15 8
+ a800 0 0 3 &ipic 16 8
+ a800 0 0 4 &ipic 17 8
+
+ /* IDSEL 0x16 */
+ b000 0 0 1 &ipic 17 8
+ b000 0 0 2 &ipic 14 8
+ b000 0 0 3 &ipic 15 8
+ b000 0 0 4 &ipic 16 8
+
+ /* IDSEL 0x17 */
+ b800 0 0 1 &ipic 16 8
+ b800 0 0 2 &ipic 17 8
+ b800 0 0 3 &ipic 14 8
+ b800 0 0 4 &ipic 15 8
+
+ /* IDSEL 0x18 */
+ c000 0 0 1 &ipic 15 8
+ c000 0 0 2 &ipic 16 8
+ c000 0 0 3 &ipic 17 8
+ c000 0 0 4 &ipic 14 8>;
+ interrupt-parent = < &ipic >;
+ interrupts = <42 8>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 b0000000 b0000000 0 10000000
+ 42000000 0 a0000000 a0000000 0 10000000
+ 01000000 0 00000000 e2100000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e0008600 100>;
+ compatible = "fsl,mpc8349-pci";
+ device_type = "pci";
+ };
};
descriptor-types-mask = <01010ebf>;
};
- pci@8500 {
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
-
- /* IDSEL 0x11 AD17 */
- 8800 0 0 1 &ipic 14 8
- 8800 0 0 2 &ipic 15 8
- 8800 0 0 3 &ipic 16 8
- 8800 0 0 4 &ipic 17 8
-
- /* IDSEL 0x12 AD18 */
- 9000 0 0 1 &ipic 16 8
- 9000 0 0 2 &ipic 17 8
- 9000 0 0 3 &ipic 14 8
- 9000 0 0 4 &ipic 15 8
-
- /* IDSEL 0x13 AD19 */
- 9800 0 0 1 &ipic 17 8
- 9800 0 0 2 &ipic 14 8
- 9800 0 0 3 &ipic 15 8
- 9800 0 0 4 &ipic 16 8
-
- /* IDSEL 0x15 AD21*/
- a800 0 0 1 &ipic 14 8
- a800 0 0 2 &ipic 15 8
- a800 0 0 3 &ipic 16 8
- a800 0 0 4 &ipic 17 8
-
- /* IDSEL 0x16 AD22*/
- b000 0 0 1 &ipic 17 8
- b000 0 0 2 &ipic 14 8
- b000 0 0 3 &ipic 15 8
- b000 0 0 4 &ipic 16 8
-
- /* IDSEL 0x17 AD23*/
- b800 0 0 1 &ipic 16 8
- b800 0 0 2 &ipic 17 8
- b800 0 0 3 &ipic 14 8
- b800 0 0 4 &ipic 15 8
-
- /* IDSEL 0x18 AD24*/
- c000 0 0 1 &ipic 15 8
- c000 0 0 2 &ipic 16 8
- c000 0 0 3 &ipic 17 8
- c000 0 0 4 &ipic 14 8>;
- interrupt-parent = < &ipic >;
- interrupts = <42 8>;
- bus-range = <0 0>;
- ranges = <02000000 0 a0000000 a0000000 0 10000000
- 42000000 0 80000000 80000000 0 10000000
- 01000000 0 00000000 e2000000 0 00100000>;
- clock-frequency = <3f940aa>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <8500 100>;
- compatible = "fsl,mpc8349-pci";
- device_type = "pci";
- };
-
ipic: pic@700 {
interrupt-controller;
#address-cells = <0>;
interrupts = <20 8 21 8>; //high:32 low:33
interrupt-parent = < &ipic >;
};
+ };
+ pci@e0008500 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x11 AD17 */
+ 8800 0 0 1 &ipic 14 8
+ 8800 0 0 2 &ipic 15 8
+ 8800 0 0 3 &ipic 16 8
+ 8800 0 0 4 &ipic 17 8
+
+ /* IDSEL 0x12 AD18 */
+ 9000 0 0 1 &ipic 16 8
+ 9000 0 0 2 &ipic 17 8
+ 9000 0 0 3 &ipic 14 8
+ 9000 0 0 4 &ipic 15 8
+
+ /* IDSEL 0x13 AD19 */
+ 9800 0 0 1 &ipic 17 8
+ 9800 0 0 2 &ipic 14 8
+ 9800 0 0 3 &ipic 15 8
+ 9800 0 0 4 &ipic 16 8
+
+ /* IDSEL 0x15 AD21*/
+ a800 0 0 1 &ipic 14 8
+ a800 0 0 2 &ipic 15 8
+ a800 0 0 3 &ipic 16 8
+ a800 0 0 4 &ipic 17 8
+
+ /* IDSEL 0x16 AD22*/
+ b000 0 0 1 &ipic 17 8
+ b000 0 0 2 &ipic 14 8
+ b000 0 0 3 &ipic 15 8
+ b000 0 0 4 &ipic 16 8
+
+ /* IDSEL 0x17 AD23*/
+ b800 0 0 1 &ipic 16 8
+ b800 0 0 2 &ipic 17 8
+ b800 0 0 3 &ipic 14 8
+ b800 0 0 4 &ipic 15 8
+
+ /* IDSEL 0x18 AD24*/
+ c000 0 0 1 &ipic 15 8
+ c000 0 0 2 &ipic 16 8
+ c000 0 0 3 &ipic 17 8
+ c000 0 0 4 &ipic 14 8>;
+ interrupt-parent = < &ipic >;
+ interrupts = <42 8>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 a0000000 a0000000 0 10000000
+ 42000000 0 80000000 80000000 0 10000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e0008500 100>;
+ compatible = "fsl,mpc8349-pci";
+ device_type = "pci";
};
};
interrupts = <2a 2>;
interrupt-parent = <&mpic>;
};
- pci@8000 {
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
+ mpic: pic@40000 {
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <40000 40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ big-endian;
+ };
+ };
- /* IDSEL 0x02 */
- 1000 0 0 1 &mpic 1 1
- 1000 0 0 2 &mpic 2 1
- 1000 0 0 3 &mpic 3 1
- 1000 0 0 4 &mpic 4 1
+ pci@e0008000 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
- /* IDSEL 0x03 */
- 1800 0 0 1 &mpic 4 1
- 1800 0 0 2 &mpic 1 1
- 1800 0 0 3 &mpic 2 1
- 1800 0 0 4 &mpic 3 1
+ /* IDSEL 0x02 */
+ 1000 0 0 1 &mpic 1 1
+ 1000 0 0 2 &mpic 2 1
+ 1000 0 0 3 &mpic 3 1
+ 1000 0 0 4 &mpic 4 1
- /* IDSEL 0x04 */
- 2000 0 0 1 &mpic 3 1
- 2000 0 0 2 &mpic 4 1
- 2000 0 0 3 &mpic 1 1
- 2000 0 0 4 &mpic 2 1
+ /* IDSEL 0x03 */
+ 1800 0 0 1 &mpic 4 1
+ 1800 0 0 2 &mpic 1 1
+ 1800 0 0 3 &mpic 2 1
+ 1800 0 0 4 &mpic 3 1
- /* IDSEL 0x05 */
- 2800 0 0 1 &mpic 2 1
- 2800 0 0 2 &mpic 3 1
- 2800 0 0 3 &mpic 4 1
- 2800 0 0 4 &mpic 1 1
+ /* IDSEL 0x04 */
+ 2000 0 0 1 &mpic 3 1
+ 2000 0 0 2 &mpic 4 1
+ 2000 0 0 3 &mpic 1 1
+ 2000 0 0 4 &mpic 2 1
- /* IDSEL 0x0c */
- 6000 0 0 1 &mpic 1 1
- 6000 0 0 2 &mpic 2 1
- 6000 0 0 3 &mpic 3 1
- 6000 0 0 4 &mpic 4 1
+ /* IDSEL 0x05 */
+ 2800 0 0 1 &mpic 2 1
+ 2800 0 0 2 &mpic 3 1
+ 2800 0 0 3 &mpic 4 1
+ 2800 0 0 4 &mpic 1 1
- /* IDSEL 0x0d */
- 6800 0 0 1 &mpic 4 1
- 6800 0 0 2 &mpic 1 1
- 6800 0 0 3 &mpic 2 1
- 6800 0 0 4 &mpic 3 1
+ /* IDSEL 0x0c */
+ 6000 0 0 1 &mpic 1 1
+ 6000 0 0 2 &mpic 2 1
+ 6000 0 0 3 &mpic 3 1
+ 6000 0 0 4 &mpic 4 1
- /* IDSEL 0x0e */
- 7000 0 0 1 &mpic 3 1
- 7000 0 0 2 &mpic 4 1
- 7000 0 0 3 &mpic 1 1
- 7000 0 0 4 &mpic 2 1
+ /* IDSEL 0x0d */
+ 6800 0 0 1 &mpic 4 1
+ 6800 0 0 2 &mpic 1 1
+ 6800 0 0 3 &mpic 2 1
+ 6800 0 0 4 &mpic 3 1
- /* IDSEL 0x0f */
- 7800 0 0 1 &mpic 2 1
- 7800 0 0 2 &mpic 3 1
- 7800 0 0 3 &mpic 4 1
- 7800 0 0 4 &mpic 1 1
+ /* IDSEL 0x0e */
+ 7000 0 0 1 &mpic 3 1
+ 7000 0 0 2 &mpic 4 1
+ 7000 0 0 3 &mpic 1 1
+ 7000 0 0 4 &mpic 2 1
- /* IDSEL 0x12 */
- 9000 0 0 1 &mpic 1 1
- 9000 0 0 2 &mpic 2 1
- 9000 0 0 3 &mpic 3 1
- 9000 0 0 4 &mpic 4 1
+ /* IDSEL 0x0f */
+ 7800 0 0 1 &mpic 2 1
+ 7800 0 0 2 &mpic 3 1
+ 7800 0 0 3 &mpic 4 1
+ 7800 0 0 4 &mpic 1 1
- /* IDSEL 0x13 */
- 9800 0 0 1 &mpic 4 1
- 9800 0 0 2 &mpic 1 1
- 9800 0 0 3 &mpic 2 1
- 9800 0 0 4 &mpic 3 1
+ /* IDSEL 0x12 */
+ 9000 0 0 1 &mpic 1 1
+ 9000 0 0 2 &mpic 2 1
+ 9000 0 0 3 &mpic 3 1
+ 9000 0 0 4 &mpic 4 1
- /* IDSEL 0x14 */
- a000 0 0 1 &mpic 3 1
- a000 0 0 2 &mpic 4 1
- a000 0 0 3 &mpic 1 1
- a000 0 0 4 &mpic 2 1
+ /* IDSEL 0x13 */
+ 9800 0 0 1 &mpic 4 1
+ 9800 0 0 2 &mpic 1 1
+ 9800 0 0 3 &mpic 2 1
+ 9800 0 0 4 &mpic 3 1
- /* IDSEL 0x15 */
- a800 0 0 1 &mpic 2 1
- a800 0 0 2 &mpic 3 1
- a800 0 0 3 &mpic 4 1
- a800 0 0 4 &mpic 1 1>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- bus-range = <0 0>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e2000000 0 00100000>;
- clock-frequency = <3f940aa>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <8000 1000>;
- compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
- device_type = "pci";
- };
+ /* IDSEL 0x14 */
+ a000 0 0 1 &mpic 3 1
+ a000 0 0 2 &mpic 4 1
+ a000 0 0 3 &mpic 1 1
+ a000 0 0 4 &mpic 2 1
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <40000 40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- big-endian;
- };
+ /* IDSEL 0x15 */
+ a800 0 0 1 &mpic 2 1
+ a800 0 0 2 &mpic 3 1
+ a800 0 0 3 &mpic 4 1
+ a800 0 0 4 &mpic 1 1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 80000000 80000000 0 20000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e0008000 1000>;
+ compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+ device_type = "pci";
};
};
#size-cells = <1>;
device_type = "soc";
ranges = <0 e0000000 00100000>;
- reg = <e0000000 00100000>; // CCSRBAR 1M
+ reg = <e0000000 00001000>; // CCSRBAR 1M
bus-frequency = <0>;
memory-controller@2000 {
interrupt-parent = <&mpic>;
};
- pci1: pci@8000 {
- interrupt-map-mask = <1f800 0 0 7>;
- interrupt-map = <
-
- /* IDSEL 0x10 */
- 08000 0 0 1 &mpic 0 1
- 08000 0 0 2 &mpic 1 1
- 08000 0 0 3 &mpic 2 1
- 08000 0 0 4 &mpic 3 1
-
- /* IDSEL 0x11 */
- 08800 0 0 1 &mpic 0 1
- 08800 0 0 2 &mpic 1 1
- 08800 0 0 3 &mpic 2 1
- 08800 0 0 4 &mpic 3 1
-
- /* IDSEL 0x12 (Slot 1) */
- 09000 0 0 1 &mpic 0 1
- 09000 0 0 2 &mpic 1 1
- 09000 0 0 3 &mpic 2 1
- 09000 0 0 4 &mpic 3 1
-
- /* IDSEL 0x13 (Slot 2) */
- 09800 0 0 1 &mpic 1 1
- 09800 0 0 2 &mpic 2 1
- 09800 0 0 3 &mpic 3 1
- 09800 0 0 4 &mpic 0 1
-
- /* IDSEL 0x14 (Slot 3) */
- 0a000 0 0 1 &mpic 2 1
- 0a000 0 0 2 &mpic 3 1
- 0a000 0 0 3 &mpic 0 1
- 0a000 0 0 4 &mpic 1 1
-
- /* IDSEL 0x15 (Slot 4) */
- 0a800 0 0 1 &mpic 3 1
- 0a800 0 0 2 &mpic 0 1
- 0a800 0 0 3 &mpic 1 1
- 0a800 0 0 4 &mpic 2 1
-
- /* Bus 1 (Tundra Bridge) */
- /* IDSEL 0x12 (ISA bridge) */
- 19000 0 0 1 &mpic 0 1
- 19000 0 0 2 &mpic 1 1
- 19000 0 0 3 &mpic 2 1
- 19000 0 0 4 &mpic 3 1>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- bus-range = <0 0>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e2000000 0 00100000>;
- clock-frequency = <3f940aa>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <8000 1000>;
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
-
- i8259@19000 {
- interrupt-controller;
- device_type = "interrupt-controller";
- reg = <19000 0 0 0 1>;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <1>;
- interrupt-parent = <&pci1>;
- };
- };
-
- pci@9000 {
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
-
- /* IDSEL 0x15 */
- a800 0 0 1 &mpic b 1
- a800 0 0 2 &mpic b 1
- a800 0 0 3 &mpic b 1
- a800 0 0 4 &mpic b 1>;
- interrupt-parent = <&mpic>;
- interrupts = <19 2>;
- bus-range = <0 0>;
- ranges = <02000000 0 a0000000 a0000000 0 20000000
- 01000000 0 00000000 e3000000 0 00100000>;
- clock-frequency = <3f940aa>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <9000 1000>;
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
- };
-
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
big-endian;
};
};
+
+ pci1: pci@e0008000 {
+ interrupt-map-mask = <1f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x10 */
+ 08000 0 0 1 &mpic 0 1
+ 08000 0 0 2 &mpic 1 1
+ 08000 0 0 3 &mpic 2 1
+ 08000 0 0 4 &mpic 3 1
+
+ /* IDSEL 0x11 */
+ 08800 0 0 1 &mpic 0 1
+ 08800 0 0 2 &mpic 1 1
+ 08800 0 0 3 &mpic 2 1
+ 08800 0 0 4 &mpic 3 1
+
+ /* IDSEL 0x12 (Slot 1) */
+ 09000 0 0 1 &mpic 0 1
+ 09000 0 0 2 &mpic 1 1
+ 09000 0 0 3 &mpic 2 1
+ 09000 0 0 4 &mpic 3 1
+
+ /* IDSEL 0x13 (Slot 2) */
+ 09800 0 0 1 &mpic 1 1
+ 09800 0 0 2 &mpic 2 1
+ 09800 0 0 3 &mpic 3 1
+ 09800 0 0 4 &mpic 0 1
+
+ /* IDSEL 0x14 (Slot 3) */
+ 0a000 0 0 1 &mpic 2 1
+ 0a000 0 0 2 &mpic 3 1
+ 0a000 0 0 3 &mpic 0 1
+ 0a000 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x15 (Slot 4) */
+ 0a800 0 0 1 &mpic 3 1
+ 0a800 0 0 2 &mpic 0 1
+ 0a800 0 0 3 &mpic 1 1
+ 0a800 0 0 4 &mpic 2 1
+
+ /* Bus 1 (Tundra Bridge) */
+ /* IDSEL 0x12 (ISA bridge) */
+ 19000 0 0 1 &mpic 0 1
+ 19000 0 0 2 &mpic 1 1
+ 19000 0 0 3 &mpic 2 1
+ 19000 0 0 4 &mpic 3 1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 80000000 80000000 0 20000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e0008000 1000>;
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+
+ i8259@19000 {
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ reg = <19000 0 0 0 1>;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+ interrupts = <1>;
+ interrupt-parent = <&pci1>;
+ };
+ };
+
+ pci@e0009000 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x15 */
+ a800 0 0 1 &mpic b 1
+ a800 0 0 2 &mpic b 1
+ a800 0 0 3 &mpic b 1
+ a800 0 0 4 &mpic b 1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <19 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 a0000000 a0000000 0 20000000
+ 01000000 0 00000000 e3000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e0009000 1000>;
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ };
};
#size-cells = <1>;
device_type = "soc";
-
- ranges = <00001000 e0001000 000ff000
- 80000000 80000000 20000000
- a0000000 a0000000 10000000
- b0000000 b0000000 00100000
- c0000000 c0000000 20000000
- b0100000 b0100000 00100000
- e1000000 e1000000 00010000
- e1010000 e1010000 00010000
- e1020000 e1020000 00010000>;
+ ranges = <00000000 e0000000 00100000>;
reg = <e0000000 00001000>; // CCSRBAR 1M
bus-frequency = <0>; // Filled out by uboot.
interrupt-parent = <&mpic>;
};
- pci@8000 {
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
-
- /* IDSEL 0x11 J17 Slot 1 */
- 8800 0 0 1 &mpic 2 1
- 8800 0 0 2 &mpic 3 1
- 8800 0 0 3 &mpic 4 1
- 8800 0 0 4 &mpic 1 1
+ global-utilities@e0000 { //global utilities block
+ compatible = "fsl,mpc8548-guts";
+ reg = <e0000 1000>;
+ fsl,has-rstcr;
+ };
- /* IDSEL 0x12 J16 Slot 2 */
+ mpic: pic@40000 {
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <40000 40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ big-endian;
+ };
+ };
- 9000 0 0 1 &mpic 3 1
- 9000 0 0 2 &mpic 4 1
- 9000 0 0 3 &mpic 2 1
- 9000 0 0 4 &mpic 1 1>;
+ pci@e0008000 {
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x11 J17 Slot 1 */
+ 8800 0 0 1 &mpic 2 1
+ 8800 0 0 2 &mpic 3 1
+ 8800 0 0 3 &mpic 4 1
+ 8800 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x12 J16 Slot 2 */
+
+ 9000 0 0 1 &mpic 3 1
+ 9000 0 0 2 &mpic 4 1
+ 9000 0 0 3 &mpic 2 1
+ 9000 0 0 4 &mpic 1 1>;
+
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ bus-range = <0 ff>;
+ ranges = <02000000 0 c0000000 c0000000 0 20000000
+ 01000000 0 00000000 e1000000 0 00010000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e0008000 1000>;
+ };
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- bus-range = <0 ff>;
- ranges = <02000000 0 c0000000 c0000000 0 20000000
- 01000000 0 00000000 e1000000 0 00010000>;
- clock-frequency = <3f940aa>;
- #interrupt-cells = <1>;
+ pcie@e0009000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e0009000 1000>;
+ bus-range = <0 ff>;
+ ranges = <02000000 0 80000000 80000000 0 20000000
+ 01000000 0 00000000 e1010000 0 00010000>;
+ clock-frequency = <1fca055>;
+ interrupt-parent = <&mpic>;
+ interrupts = <1a 2>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 4 1
+ 0000 0 0 2 &mpic 5 1
+ 0000 0 0 3 &mpic 6 1
+ 0000 0 0 4 &mpic 7 1
+ >;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <8000 1000>;
- };
-
- pcie@9000 {
- compatible = "fsl,mpc8548-pcie";
device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <9000 1000>;
- bus-range = <0 ff>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e1010000 0 00010000>;
- clock-frequency = <1fca055>;
- interrupt-parent = <&mpic>;
- interrupts = <1a 2>;
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
- >;
+ ranges = <02000000 0 80000000
+ 02000000 0 80000000
+ 0 20000000
+
+ 01000000 0 00000000
+ 01000000 0 00000000
+ 0 00010000>;
};
+ };
- pcie@a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
+ pcie@e000a000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e000a000 1000>;
+ bus-range = <0 ff>;
+ ranges = <02000000 0 a0000000 a0000000 0 10000000
+ 01000000 0 00000000 e1020000 0 00010000>;
+ clock-frequency = <1fca055>;
+ interrupt-parent = <&mpic>;
+ interrupts = <19 2>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 0 1
+ 0000 0 0 2 &mpic 1 1
+ 0000 0 0 3 &mpic 2 1
+ 0000 0 0 4 &mpic 3 1
+ >;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <a000 1000>;
- bus-range = <0 ff>;
- ranges = <02000000 0 a0000000 a0000000 0 10000000
- 01000000 0 00000000 e1020000 0 00010000>;
- clock-frequency = <1fca055>;
- interrupt-parent = <&mpic>;
- interrupts = <19 2>;
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
- >;
+ device_type = "pci";
+ ranges = <02000000 0 a0000000
+ 02000000 0 a0000000
+ 0 10000000
+
+ 01000000 0 00000000
+ 01000000 0 00000000
+ 0 00010000>;
};
+ };
- pcie@b000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
+ pcie@e000b000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e000b000 1000>;
+ bus-range = <0 ff>;
+ ranges = <02000000 0 b0000000 b0000000 0 00100000
+ 01000000 0 00000000 b0100000 0 00100000>;
+ clock-frequency = <1fca055>;
+ interrupt-parent = <&mpic>;
+ interrupts = <1b 2>;
+ interrupt-map-mask = <fb00 0 0 0>;
+ interrupt-map = <
+ // IDSEL 0x1c USB
+ e000 0 0 0 &i8259 c 2
+ e100 0 0 0 &i8259 9 2
+ e200 0 0 0 &i8259 a 2
+ e300 0 0 0 &i8259 b 2
+
+ // IDSEL 0x1d Audio
+ e800 0 0 0 &i8259 6 2
+
+ // IDSEL 0x1e Legacy
+ f000 0 0 0 &i8259 7 2
+ f100 0 0 0 &i8259 7 2
+
+ // IDSEL 0x1f IDE/SATA
+ f800 0 0 0 &i8259 e 2
+ f900 0 0 0 &i8259 5 2
+ >;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <b000 1000>;
- bus-range = <0 ff>;
- ranges = <02000000 0 b0000000 b0000000 0 00100000
- 01000000 0 00000000 b0100000 0 00100000>;
- clock-frequency = <1fca055>;
- interrupt-parent = <&mpic>;
- interrupts = <1b 2>;
- interrupt-map-mask = <fb00 0 0 0>;
- interrupt-map = <
- // IDSEL 0x1c USB
- e000 0 0 0 &i8259 c 2
- e100 0 0 0 &i8259 9 2
- e200 0 0 0 &i8259 a 2
- e300 0 0 0 &i8259 b 2
-
- // IDSEL 0x1d Audio
- e800 0 0 0 &i8259 6 2
-
- // IDSEL 0x1e Legacy
- f000 0 0 0 &i8259 7 2
- f100 0 0 0 &i8259 7 2
-
- // IDSEL 0x1f IDE/SATA
- f800 0 0 0 &i8259 e 2
- f900 0 0 0 &i8259 5 2
- >;
+ device_type = "pci";
+ ranges = <02000000 0 b0000000
+ 02000000 0 b0000000
+ 0 00100000
+
+ 01000000 0 00000000
+ 01000000 0 00000000
+ 0 00100000>;
+
uli1575@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
ranges = <02000000 0 b0000000
02000000 0 b0000000
0 00100000
+
01000000 0 00000000
01000000 0 00000000
0 00100000>;
-
- pci_bridge@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <02000000 0 b0000000
- 02000000 0 b0000000
- 0 00100000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00100000>;
-
- isa@1e {
- device_type = "isa";
+ isa@1e {
+ device_type = "isa";
+ #interrupt-cells = <2>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <f000 0 0 0 0>;
+ ranges = <1 0
+ 01000000 0 0
+ 00001000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ reg = <1 20 2
+ 1 a0 2
+ 1 4d0 2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
#interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <f000 0 0 0 0>;
- ranges = <1 0
- 01000000 0 0
- 00001000>;
+ compatible = "chrp,iic";
+ interrupts = <9 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ i8042@60 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <1 60 1 1 64 1>;
+ interrupts = <1 3 c 3>;
interrupt-parent = <&i8259>;
- i8259: interrupt-controller@20 {
- reg = <1 20 2
- 1 a0 2
- 1 4d0 2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
+ keyboard@0 {
+ reg = <0>;
+ compatible = "pnpPNP,303";
};
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <1 60 1 1 64 1>;
- interrupts = <1 3 c 3>;
- interrupt-parent = <&i8259>;
-
- keyboard@0 {
- reg = <0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <1>;
- compatible = "pnpPNP,f03";
- };
+ mouse@1 {
+ reg = <1>;
+ compatible = "pnpPNP,f03";
};
+ };
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <1 70 2>;
- };
+ rtc@70 {
+ compatible = "pnpPNP,b00";
+ reg = <1 70 2>;
+ };
- gpio@400 {
- reg = <1 400 80>;
- };
+ gpio@400 {
+ reg = <1 400 80>;
};
};
};
-
};
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8548-guts";
- reg = <e0000 1000>;
- fsl,has-rstcr;
- };
-
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <40000 40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- big-endian;
- };
};
};
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- ranges = <00001000 e0001000 000ff000
- 80000000 80000000 10000000
- e2000000 e2000000 00800000
- 90000000 90000000 10000000
- e2800000 e2800000 00800000
- a0000000 a0000000 20000000
- e3000000 e3000000 01000000>;
+ ranges = <00000000 e0000000 00100000>;
reg = <e0000000 00001000>; // CCSRBAR
bus-frequency = <0>;
fsl,has-rstcr;
};
- pci@8000 {
+ mpic: pic@40000 {
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <40000 40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ big-endian;
+ };
+ };
+
+ pci@e0008000 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x4 (PCIX Slot 2) */
+ 02000 0 0 1 &mpic 0 1
+ 02000 0 0 2 &mpic 1 1
+ 02000 0 0 3 &mpic 2 1
+ 02000 0 0 4 &mpic 3 1
+
+ /* IDSEL 0x5 (PCIX Slot 3) */
+ 02800 0 0 1 &mpic 1 1
+ 02800 0 0 2 &mpic 2 1
+ 02800 0 0 3 &mpic 3 1
+ 02800 0 0 4 &mpic 0 1
+
+ /* IDSEL 0x6 (PCIX Slot 4) */
+ 03000 0 0 1 &mpic 2 1
+ 03000 0 0 2 &mpic 3 1
+ 03000 0 0 3 &mpic 0 1
+ 03000 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x8 (PCIX Slot 5) */
+ 04000 0 0 1 &mpic 0 1
+ 04000 0 0 2 &mpic 1 1
+ 04000 0 0 3 &mpic 2 1
+ 04000 0 0 4 &mpic 3 1
+
+ /* IDSEL 0xC (Tsi310 bridge) */
+ 06000 0 0 1 &mpic 0 1
+ 06000 0 0 2 &mpic 1 1
+ 06000 0 0 3 &mpic 2 1
+ 06000 0 0 4 &mpic 3 1
+
+ /* IDSEL 0x14 (Slot 2) */
+ 0a000 0 0 1 &mpic 0 1
+ 0a000 0 0 2 &mpic 1 1
+ 0a000 0 0 3 &mpic 2 1
+ 0a000 0 0 4 &mpic 3 1
+
+ /* IDSEL 0x15 (Slot 3) */
+ 0a800 0 0 1 &mpic 1 1
+ 0a800 0 0 2 &mpic 2 1
+ 0a800 0 0 3 &mpic 3 1
+ 0a800 0 0 4 &mpic 0 1
+
+ /* IDSEL 0x16 (Slot 4) */
+ 0b000 0 0 1 &mpic 2 1
+ 0b000 0 0 2 &mpic 3 1
+ 0b000 0 0 3 &mpic 0 1
+ 0b000 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x18 (Slot 5) */
+ 0c000 0 0 1 &mpic 0 1
+ 0c000 0 0 2 &mpic 1 1
+ 0c000 0 0 3 &mpic 2 1
+ 0c000 0 0 4 &mpic 3 1
+
+ /* IDSEL 0x1C (Tsi310 bridge PCI primary) */
+ 0E000 0 0 1 &mpic 0 1
+ 0E000 0 0 2 &mpic 1 1
+ 0E000 0 0 3 &mpic 2 1
+ 0E000 0 0 4 &mpic 3 1>;
+
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 80000000 80000000 0 10000000
+ 01000000 0 00000000 e2000000 0 00800000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e0008000 1000>;
+ compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+ device_type = "pci";
+
+ pci_bridge@1c {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
- /* IDSEL 0x4 (PCIX Slot 2) */
- 02000 0 0 1 &mpic 0 1
- 02000 0 0 2 &mpic 1 1
- 02000 0 0 3 &mpic 2 1
- 02000 0 0 4 &mpic 3 1
-
- /* IDSEL 0x5 (PCIX Slot 3) */
- 02800 0 0 1 &mpic 1 1
- 02800 0 0 2 &mpic 2 1
- 02800 0 0 3 &mpic 3 1
- 02800 0 0 4 &mpic 0 1
-
- /* IDSEL 0x6 (PCIX Slot 4) */
- 03000 0 0 1 &mpic 2 1
- 03000 0 0 2 &mpic 3 1
- 03000 0 0 3 &mpic 0 1
- 03000 0 0 4 &mpic 1 1
-
- /* IDSEL 0x8 (PCIX Slot 5) */
- 04000 0 0 1 &mpic 0 1
- 04000 0 0 2 &mpic 1 1
- 04000 0 0 3 &mpic 2 1
- 04000 0 0 4 &mpic 3 1
-
- /* IDSEL 0xC (Tsi310 bridge) */
- 06000 0 0 1 &mpic 0 1
- 06000 0 0 2 &mpic 1 1
- 06000 0 0 3 &mpic 2 1
- 06000 0 0 4 &mpic 3 1
-
- /* IDSEL 0x14 (Slot 2) */
- 0a000 0 0 1 &mpic 0 1
- 0a000 0 0 2 &mpic 1 1
- 0a000 0 0 3 &mpic 2 1
- 0a000 0 0 4 &mpic 3 1
-
- /* IDSEL 0x15 (Slot 3) */
- 0a800 0 0 1 &mpic 1 1
- 0a800 0 0 2 &mpic 2 1
- 0a800 0 0 3 &mpic 3 1
- 0a800 0 0 4 &mpic 0 1
-
- /* IDSEL 0x16 (Slot 4) */
- 0b000 0 0 1 &mpic 2 1
- 0b000 0 0 2 &mpic 3 1
- 0b000 0 0 3 &mpic 0 1
- 0b000 0 0 4 &mpic 1 1
-
- /* IDSEL 0x18 (Slot 5) */
- 0c000 0 0 1 &mpic 0 1
- 0c000 0 0 2 &mpic 1 1
- 0c000 0 0 3 &mpic 2 1
- 0c000 0 0 4 &mpic 3 1
-
- /* IDSEL 0x1C (Tsi310 bridge PCI primary) */
- 0E000 0 0 1 &mpic 0 1
- 0E000 0 0 2 &mpic 1 1
- 0E000 0 0 3 &mpic 2 1
- 0E000 0 0 4 &mpic 3 1>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- bus-range = <0 0>;
- ranges = <02000000 0 80000000 80000000 0 10000000
- 01000000 0 00000000 e2000000 0 00800000>;
- clock-frequency = <3f940aa>;
+ /* IDSEL 0x00 (PrPMC Site) */
+ 0000 0 0 1 &mpic 0 1
+ 0000 0 0 2 &mpic 1 1
+ 0000 0 0 3 &mpic 2 1
+ 0000 0 0 4 &mpic 3 1
+
+ /* IDSEL 0x04 (VIA chip) */
+ 2000 0 0 1 &mpic 0 1
+ 2000 0 0 2 &mpic 1 1
+ 2000 0 0 3 &mpic 2 1
+ 2000 0 0 4 &mpic 3 1
+
+ /* IDSEL 0x05 (8139) */
+ 2800 0 0 1 &mpic 1 1
+
+ /* IDSEL 0x06 (Slot 6) */
+ 3000 0 0 1 &mpic 2 1
+ 3000 0 0 2 &mpic 3 1
+ 3000 0 0 3 &mpic 0 1
+ 3000 0 0 4 &mpic 1 1
+
+ /* IDESL 0x07 (Slot 7) */
+ 3800 0 0 1 &mpic 3 1
+ 3800 0 0 2 &mpic 0 1
+ 3800 0 0 3 &mpic 1 1
+ 3800 0 0 4 &mpic 2 1>;
+
+ reg = <e000 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <8000 1000>;
- compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
- device_type = "pci";
+ ranges = <02000000 0 80000000
+ 02000000 0 80000000
+ 0 20000000
+ 01000000 0 00000000
+ 01000000 0 00000000
+ 0 00080000>;
+ clock-frequency = <1fca055>;
- pci_bridge@1c {
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
-
- /* IDSEL 0x00 (PrPMC Site) */
- 0000 0 0 1 &mpic 0 1
- 0000 0 0 2 &mpic 1 1
- 0000 0 0 3 &mpic 2 1
- 0000 0 0 4 &mpic 3 1
-
- /* IDSEL 0x04 (VIA chip) */
- 2000 0 0 1 &mpic 0 1
- 2000 0 0 2 &mpic 1 1
- 2000 0 0 3 &mpic 2 1
- 2000 0 0 4 &mpic 3 1
-
- /* IDSEL 0x05 (8139) */
- 2800 0 0 1 &mpic 1 1
-
- /* IDSEL 0x06 (Slot 6) */
- 3000 0 0 1 &mpic 2 1
- 3000 0 0 2 &mpic 3 1
- 3000 0 0 3 &mpic 0 1
- 3000 0 0 4 &mpic 1 1
-
- /* IDESL 0x07 (Slot 7) */
- 3800 0 0 1 &mpic 3 1
- 3800 0 0 2 &mpic 0 1
- 3800 0 0 3 &mpic 1 1
- 3800 0 0 4 &mpic 2 1>;
-
- reg = <e000 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <02000000 0 80000000
- 02000000 0 80000000
- 0 20000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00080000>;
- clock-frequency = <1fca055>;
-
- isa@4 {
- device_type = "isa";
+ isa@4 {
+ device_type = "isa";
+ #interrupt-cells = <2>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <2000 0 0 0 0>;
+ ranges = <1 0 01000000 0 0 00001000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ reg = <1 20 2
+ 1 a0 2
+ 1 4d0 2>;
+ #address-cells = <0>;
#interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <2000 0 0 0 0>;
- ranges = <1 0 01000000 0 0 00001000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- interrupt-controller;
- device_type = "interrupt-controller";
- reg = <1 20 2
- 1 a0 2
- 1 4d0 2>;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <0 1>;
- interrupt-parent = <&mpic>;
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <1 70 2>;
- };
+ compatible = "chrp,iic";
+ interrupts = <0 1>;
+ interrupt-parent = <&mpic>;
};
- };
- };
- pci@9000 {
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
-
- /* IDSEL 0x15 */
- a800 0 0 1 &mpic b 1
- a800 0 0 2 &mpic 1 1
- a800 0 0 3 &mpic 2 1
- a800 0 0 4 &mpic 3 1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <19 2>;
- bus-range = <0 0>;
- ranges = <02000000 0 90000000 90000000 0 10000000
- 01000000 0 00000000 e2800000 0 00800000>;
- clock-frequency = <3f940aa>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <9000 1000>;
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
+ rtc@70 {
+ compatible = "pnpPNP,b00";
+ reg = <1 70 2>;
+ };
+ };
};
- /* PCI Express */
- pcie@a000 {
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
+ };
- /* IDSEL 0x0 (PEX) */
- 00000 0 0 1 &mpic 0 1
- 00000 0 0 2 &mpic 1 1
- 00000 0 0 3 &mpic 2 1
- 00000 0 0 4 &mpic 3 1>;
+ pci@e0009000 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x15 */
+ a800 0 0 1 &mpic b 1
+ a800 0 0 2 &mpic 1 1
+ a800 0 0 3 &mpic 2 1
+ a800 0 0 4 &mpic 3 1>;
+
+ interrupt-parent = <&mpic>;
+ interrupts = <19 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 90000000 90000000 0 10000000
+ 01000000 0 00000000 e2800000 0 00800000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e0009000 1000>;
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ };
- interrupt-parent = <&mpic>;
- interrupts = <1a 2>;
- bus-range = <0 ff>;
- ranges = <02000000 0 a0000000 a0000000 0 20000000
- 01000000 0 00000000 e3000000 0 08000000>;
- clock-frequency = <1fca055>;
- #interrupt-cells = <1>;
+ pcie@e000a000 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x0 (PEX) */
+ 00000 0 0 1 &mpic 0 1
+ 00000 0 0 2 &mpic 1 1
+ 00000 0 0 3 &mpic 2 1
+ 00000 0 0 4 &mpic 3 1>;
+
+ interrupt-parent = <&mpic>;
+ interrupts = <1a 2>;
+ bus-range = <0 ff>;
+ ranges = <02000000 0 a0000000 a0000000 0 20000000
+ 01000000 0 00000000 e3000000 0 08000000>;
+ clock-frequency = <1fca055>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e000a000 1000>;
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ pcie@0 {
+ reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <a000 1000>;
- compatible = "fsl,mpc8548-pcie";
device_type = "pci";
- };
+ ranges = <02000000 0 a0000000
+ 02000000 0 a0000000
+ 0 20000000
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <40000 40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- big-endian;
+ 01000000 0 00000000
+ 01000000 0 00000000
+ 0 08000000>;
};
};
};
#size-cells = <1>;
device_type = "soc";
ranges = <0 e0000000 00100000>;
- reg = <e0000000 00100000>; // CCSRBAR 1M
+ reg = <e0000000 00001000>; // CCSRBAR 1M
bus-frequency = <0>;
memory-controller@2000 {
interrupt-parent = <&mpic>;
};
- pci1: pci@8000 {
- interrupt-map-mask = <1f800 0 0 7>;
- interrupt-map = <
-
- /* IDSEL 0x10 */
- 08000 0 0 1 &mpic 0 1
- 08000 0 0 2 &mpic 1 1
- 08000 0 0 3 &mpic 2 1
- 08000 0 0 4 &mpic 3 1
-
- /* IDSEL 0x11 */
- 08800 0 0 1 &mpic 0 1
- 08800 0 0 2 &mpic 1 1
- 08800 0 0 3 &mpic 2 1
- 08800 0 0 4 &mpic 3 1
-
- /* IDSEL 0x12 (Slot 1) */
- 09000 0 0 1 &mpic 0 1
- 09000 0 0 2 &mpic 1 1
- 09000 0 0 3 &mpic 2 1
- 09000 0 0 4 &mpic 3 1
-
- /* IDSEL 0x13 (Slot 2) */
- 09800 0 0 1 &mpic 1 1
- 09800 0 0 2 &mpic 2 1
- 09800 0 0 3 &mpic 3 1
- 09800 0 0 4 &mpic 0 1
-
- /* IDSEL 0x14 (Slot 3) */
- 0a000 0 0 1 &mpic 2 1
- 0a000 0 0 2 &mpic 3 1
- 0a000 0 0 3 &mpic 0 1
- 0a000 0 0 4 &mpic 1 1
-
- /* IDSEL 0x15 (Slot 4) */
- 0a800 0 0 1 &mpic 3 1
- 0a800 0 0 2 &mpic 0 1
- 0a800 0 0 3 &mpic 1 1
- 0a800 0 0 4 &mpic 2 1
-
- /* Bus 1 (Tundra Bridge) */
- /* IDSEL 0x12 (ISA bridge) */
- 19000 0 0 1 &mpic 0 1
- 19000 0 0 2 &mpic 1 1
- 19000 0 0 3 &mpic 2 1
- 19000 0 0 4 &mpic 3 1>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- bus-range = <0 0>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e2000000 0 00100000>;
- clock-frequency = <3f940aa>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <8000 1000>;
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
-
- i8259@19000 {
- interrupt-controller;
- device_type = "interrupt-controller";
- reg = <19000 0 0 0 1>;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <1>;
- interrupt-parent = <&pci1>;
- };
- };
-
- pci@9000 {
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
-
- /* IDSEL 0x15 */
- a800 0 0 1 &mpic b 1
- a800 0 0 2 &mpic b 1
- a800 0 0 3 &mpic b 1
- a800 0 0 4 &mpic b 1>;
- interrupt-parent = <&mpic>;
- interrupts = <19 2>;
- bus-range = <0 0>;
- ranges = <02000000 0 a0000000 a0000000 0 20000000
- 01000000 0 00000000 e3000000 0 00100000>;
- clock-frequency = <3f940aa>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <9000 1000>;
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
- };
-
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
big-endian;
};
};
+
+ pci1: pci@e0008000 {
+ interrupt-map-mask = <1f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x10 */
+ 08000 0 0 1 &mpic 0 1
+ 08000 0 0 2 &mpic 1 1
+ 08000 0 0 3 &mpic 2 1
+ 08000 0 0 4 &mpic 3 1
+
+ /* IDSEL 0x11 */
+ 08800 0 0 1 &mpic 0 1
+ 08800 0 0 2 &mpic 1 1
+ 08800 0 0 3 &mpic 2 1
+ 08800 0 0 4 &mpic 3 1
+
+ /* IDSEL 0x12 (Slot 1) */
+ 09000 0 0 1 &mpic 0 1
+ 09000 0 0 2 &mpic 1 1
+ 09000 0 0 3 &mpic 2 1
+ 09000 0 0 4 &mpic 3 1
+
+ /* IDSEL 0x13 (Slot 2) */
+ 09800 0 0 1 &mpic 1 1
+ 09800 0 0 2 &mpic 2 1
+ 09800 0 0 3 &mpic 3 1
+ 09800 0 0 4 &mpic 0 1
+
+ /* IDSEL 0x14 (Slot 3) */
+ 0a000 0 0 1 &mpic 2 1
+ 0a000 0 0 2 &mpic 3 1
+ 0a000 0 0 3 &mpic 0 1
+ 0a000 0 0 4 &mpic 1 1
+
+ /* IDSEL 0x15 (Slot 4) */
+ 0a800 0 0 1 &mpic 3 1
+ 0a800 0 0 2 &mpic 0 1
+ 0a800 0 0 3 &mpic 1 1
+ 0a800 0 0 4 &mpic 2 1
+
+ /* Bus 1 (Tundra Bridge) */
+ /* IDSEL 0x12 (ISA bridge) */
+ 19000 0 0 1 &mpic 0 1
+ 19000 0 0 2 &mpic 1 1
+ 19000 0 0 3 &mpic 2 1
+ 19000 0 0 4 &mpic 3 1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 80000000 80000000 0 20000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e0008000 1000>;
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+
+ i8259@19000 {
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ reg = <19000 0 0 0 1>;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+ interrupts = <1>;
+ interrupt-parent = <&pci1>;
+ };
+ };
+
+ pci@e0009000 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x15 */
+ a800 0 0 1 &mpic b 1
+ a800 0 0 2 &mpic b 1
+ a800 0 0 3 &mpic b 1
+ a800 0 0 4 &mpic b 1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <19 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 a0000000 a0000000 0 20000000
+ 01000000 0 00000000 e3000000 0 00100000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e0009000 1000>;
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ };
};
phy-handle = <&phy1>;
};
- pci@8000 {
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
- device_type = "pci";
- reg = <8000 1000>;
- clock-frequency = <3f940aa>;
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
-
- /* IDSEL 0x2 */
- 1000 0 0 1 &mpic 1 1
- 1000 0 0 2 &mpic 2 1
- 1000 0 0 3 &mpic 3 1
- 1000 0 0 4 &mpic 4 1
-
- /* IDSEL 0x3 */
- 1800 0 0 1 &mpic 4 1
- 1800 0 0 2 &mpic 1 1
- 1800 0 0 3 &mpic 2 1
- 1800 0 0 4 &mpic 3 1
-
- /* IDSEL 0x4 */
- 2000 0 0 1 &mpic 3 1
- 2000 0 0 2 &mpic 4 1
- 2000 0 0 3 &mpic 1 1
- 2000 0 0 4 &mpic 2 1
-
- /* IDSEL 0x5 */
- 2800 0 0 1 &mpic 2 1
- 2800 0 0 2 &mpic 3 1
- 2800 0 0 3 &mpic 4 1
- 2800 0 0 4 &mpic 1 1
-
- /* IDSEL 12 */
- 6000 0 0 1 &mpic 1 1
- 6000 0 0 2 &mpic 2 1
- 6000 0 0 3 &mpic 3 1
- 6000 0 0 4 &mpic 4 1
-
- /* IDSEL 13 */
- 6800 0 0 1 &mpic 4 1
- 6800 0 0 2 &mpic 1 1
- 6800 0 0 3 &mpic 2 1
- 6800 0 0 4 &mpic 3 1
-
- /* IDSEL 14*/
- 7000 0 0 1 &mpic 3 1
- 7000 0 0 2 &mpic 4 1
- 7000 0 0 3 &mpic 1 1
- 7000 0 0 4 &mpic 2 1
-
- /* IDSEL 15 */
- 7800 0 0 1 &mpic 2 1
- 7800 0 0 2 &mpic 3 1
- 7800 0 0 3 &mpic 4 1
- 7800 0 0 4 &mpic 1 1
-
- /* IDSEL 18 */
- 9000 0 0 1 &mpic 1 1
- 9000 0 0 2 &mpic 2 1
- 9000 0 0 3 &mpic 3 1
- 9000 0 0 4 &mpic 4 1
-
- /* IDSEL 19 */
- 9800 0 0 1 &mpic 4 1
- 9800 0 0 2 &mpic 1 1
- 9800 0 0 3 &mpic 2 1
- 9800 0 0 4 &mpic 3 1
-
- /* IDSEL 20 */
- a000 0 0 1 &mpic 3 1
- a000 0 0 2 &mpic 4 1
- a000 0 0 3 &mpic 1 1
- a000 0 0 4 &mpic 2 1
-
- /* IDSEL 21 */
- a800 0 0 1 &mpic 2 1
- a800 0 0 2 &mpic 3 1
- a800 0 0 3 &mpic 4 1
- a800 0 0 4 &mpic 1 1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- bus-range = <0 0>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e2000000 0 01000000>;
- };
-
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
};
};
};
+
+ pci@e0008000 {
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+ device_type = "pci";
+ reg = <e0008000 1000>;
+ clock-frequency = <3f940aa>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x2 */
+ 1000 0 0 1 &mpic 1 1
+ 1000 0 0 2 &mpic 2 1
+ 1000 0 0 3 &mpic 3 1
+ 1000 0 0 4 &mpic 4 1
+
+ /* IDSEL 0x3 */
+ 1800 0 0 1 &mpic 4 1
+ 1800 0 0 2 &mpic 1 1
+ 1800 0 0 3 &mpic 2 1
+ 1800 0 0 4 &mpic 3 1
+
+ /* IDSEL 0x4 */
+ 2000 0 0 1 &mpic 3 1
+ 2000 0 0 2 &mpic 4 1
+ 2000 0 0 3 &mpic 1 1
+ 2000 0 0 4 &mpic 2 1
+
+ /* IDSEL 0x5 */
+ 2800 0 0 1 &mpic 2 1
+ 2800 0 0 2 &mpic 3 1
+ 2800 0 0 3 &mpic 4 1
+ 2800 0 0 4 &mpic 1 1
+
+ /* IDSEL 12 */
+ 6000 0 0 1 &mpic 1 1
+ 6000 0 0 2 &mpic 2 1
+ 6000 0 0 3 &mpic 3 1
+ 6000 0 0 4 &mpic 4 1
+
+ /* IDSEL 13 */
+ 6800 0 0 1 &mpic 4 1
+ 6800 0 0 2 &mpic 1 1
+ 6800 0 0 3 &mpic 2 1
+ 6800 0 0 4 &mpic 3 1
+
+ /* IDSEL 14*/
+ 7000 0 0 1 &mpic 3 1
+ 7000 0 0 2 &mpic 4 1
+ 7000 0 0 3 &mpic 1 1
+ 7000 0 0 4 &mpic 2 1
+
+ /* IDSEL 15 */
+ 7800 0 0 1 &mpic 2 1
+ 7800 0 0 2 &mpic 3 1
+ 7800 0 0 3 &mpic 4 1
+ 7800 0 0 4 &mpic 1 1
+
+ /* IDSEL 18 */
+ 9000 0 0 1 &mpic 1 1
+ 9000 0 0 2 &mpic 2 1
+ 9000 0 0 3 &mpic 3 1
+ 9000 0 0 4 &mpic 4 1
+
+ /* IDSEL 19 */
+ 9800 0 0 1 &mpic 4 1
+ 9800 0 0 2 &mpic 1 1
+ 9800 0 0 3 &mpic 2 1
+ 9800 0 0 4 &mpic 3 1
+
+ /* IDSEL 20 */
+ a000 0 0 1 &mpic 3 1
+ a000 0 0 2 &mpic 4 1
+ a000 0 0 3 &mpic 1 1
+ a000 0 0 4 &mpic 2 1
+
+ /* IDSEL 21 */
+ a800 0 0 1 &mpic 2 1
+ a800 0 0 2 &mpic 3 1
+ a800 0 0 3 &mpic 4 1
+ a800 0 0 4 &mpic 1 1>;
+
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ bus-range = <0 0>;
+ ranges = <02000000 0 80000000 80000000 0 20000000
+ 01000000 0 00000000 e2000000 0 01000000>;
+ };
};
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- ranges = <00001000 f8001000 000ff000
- 80000000 80000000 20000000
- e2000000 e2000000 00100000
- a0000000 a0000000 20000000
- e3000000 e3000000 00100000>;
+ ranges = <00000000 f8000000 00100000>;
reg = <f8000000 00001000>; // CCSRBAR
bus-frequency = <0>;
interrupt-parent = <&mpic>;
};
- pcie@8000 {
- compatible = "fsl,mpc8641-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <8000 1000>;
- bus-range = <0 ff>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e2000000 0 00100000>;
- clock-frequency = <1fca055>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- interrupt-map-mask = <fb00 0 0 0>;
- interrupt-map = <
- /* IDSEL 0x11 */
- 8800 0 0 1 &i8259 9 2
- 8800 0 0 2 &i8259 a 2
- 8800 0 0 3 &i8259 b 2
- 8800 0 0 4 &i8259 c 2
+ mpic: pic@40000 {
+ clock-frequency = <0>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <40000 40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ big-endian;
+ };
+ };
- /* IDSEL 0x12 */
- 9000 0 0 1 &i8259 a 2
- 9000 0 0 2 &i8259 b 2
- 9000 0 0 3 &i8259 c 2
- 9000 0 0 4 &i8259 9 2
+ pcie@f8008000 {
+ compatible = "fsl,mpc8641-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <f8008000 1000>;
+ bus-range = <0 ff>;
+ ranges = <02000000 0 80000000 80000000 0 20000000
+ 01000000 0 00000000 e2000000 0 00100000>;
+ clock-frequency = <1fca055>;
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ interrupt-map-mask = <fb00 0 0 0>;
+ interrupt-map = <
+ /* IDSEL 0x11 */
+ 8800 0 0 1 &i8259 9 2
+ 8800 0 0 2 &i8259 a 2
+ 8800 0 0 3 &i8259 b 2
+ 8800 0 0 4 &i8259 c 2
- // IDSEL 0x1c USB
- e000 0 0 0 &i8259 c 2
- e100 0 0 0 &i8259 9 2
- e200 0 0 0 &i8259 a 2
- e300 0 0 0 &i8259 b 2
+ /* IDSEL 0x12 */
+ 9000 0 0 1 &i8259 a 2
+ 9000 0 0 2 &i8259 b 2
+ 9000 0 0 3 &i8259 c 2
+ 9000 0 0 4 &i8259 9 2
- // IDSEL 0x1d Audio
- e800 0 0 0 &i8259 6 2
+ // IDSEL 0x1c USB
+ e000 0 0 0 &i8259 c 2
+ e100 0 0 0 &i8259 9 2
+ e200 0 0 0 &i8259 a 2
+ e300 0 0 0 &i8259 b 2
- // IDSEL 0x1e Legacy
- f000 0 0 0 &i8259 7 2
- f100 0 0 0 &i8259 7 2
+ // IDSEL 0x1d Audio
+ e800 0 0 0 &i8259 6 2
- // IDSEL 0x1f IDE/SATA
- f800 0 0 0 &i8259 e 2
- f900 0 0 0 &i8259 5 2
- >;
+ // IDSEL 0x1e Legacy
+ f000 0 0 0 &i8259 7 2
+ f100 0 0 0 &i8259 7 2
+
+ // IDSEL 0x1f IDE/SATA
+ f800 0 0 0 &i8259 e 2
+ f900 0 0 0 &i8259 5 2
+ >;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <02000000 0 80000000
+ 02000000 0 80000000
+ 0 20000000
+
+ 01000000 0 00000000
+ 01000000 0 00000000
+ 0 00100000>;
uli1575@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
01000000 0 00000000
01000000 0 00000000
0 00100000>;
+ isa@1e {
+ device_type = "isa";
+ #interrupt-cells = <2>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <f000 0 0 0 0>;
+ ranges = <1 0 01000000 0 0
+ 00001000>;
+ interrupt-parent = <&i8259>;
- pci_bridge@0 {
- reg = <0 0 0 0 0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <02000000 0 80000000
- 02000000 0 80000000
- 0 20000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00100000>;
-
- isa@1e {
- device_type = "isa";
+ i8259: interrupt-controller@20 {
+ reg = <1 20 2
+ 1 a0 2
+ 1 4d0 2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
#interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <f000 0 0 0 0>;
- ranges = <1 0 01000000 0 0
- 00001000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <1 20 2
- 1 a0 2
- 1 4d0 2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent =
- <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <1 60 1 1 64 1>;
- interrupts = <1 3 c 3>;
- interrupt-parent =
- <&i8259>;
+ compatible = "chrp,iic";
+ interrupts = <9 2>;
+ interrupt-parent = <&mpic>;
+ };
- keyboard@0 {
- reg = <0>;
- compatible = "pnpPNP,303";
- };
+ i8042@60 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <1 60 1 1 64 1>;
+ interrupts = <1 3 c 3>;
+ interrupt-parent =
+ <&i8259>;
- mouse@1 {
- reg = <1>;
- compatible = "pnpPNP,f03";
- };
+ keyboard@0 {
+ reg = <0>;
+ compatible = "pnpPNP,303";
};
- rtc@70 {
- compatible =
- "pnpPNP,b00";
- reg = <1 70 2>;
+ mouse@1 {
+ reg = <1>;
+ compatible = "pnpPNP,f03";
};
+ };
- gpio@400 {
- reg = <1 400 80>;
- };
+ rtc@70 {
+ compatible =
+ "pnpPNP,b00";
+ reg = <1 70 2>;
+ };
+
+ gpio@400 {
+ reg = <1 400 80>;
};
};
};
-
};
- pcie@9000 {
- compatible = "fsl,mpc8641-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
+ };
+
+ pcie@f8009000 {
+ compatible = "fsl,mpc8641-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <f8009000 1000>;
+ bus-range = <0 ff>;
+ ranges = <02000000 0 a0000000 a0000000 0 20000000
+ 01000000 0 00000000 e3000000 0 00100000>;
+ clock-frequency = <1fca055>;
+ interrupt-parent = <&mpic>;
+ interrupts = <19 2>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 4 1
+ 0000 0 0 2 &mpic 5 1
+ 0000 0 0 3 &mpic 6 1
+ 0000 0 0 4 &mpic 7 1
+ >;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <9000 1000>;
- bus-range = <0 ff>;
- ranges = <02000000 0 a0000000 a0000000 0 20000000
- 01000000 0 00000000 e3000000 0 00100000>;
- clock-frequency = <1fca055>;
- interrupt-parent = <&mpic>;
- interrupts = <19 2>;
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
- >;
- };
+ device_type = "pci";
+ ranges = <02000000 0 a0000000
+ 02000000 0 a0000000
+ 0 20000000
- mpic: pic@40000 {
- clock-frequency = <0>;
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <40000 40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- big-endian;
+ 01000000 0 00000000
+ 01000000 0 00000000
+ 0 00100000>;
};
};
};
git.openpandora.org / pandora-kernel.git / commitdiff