#include <linux/input.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/htcpld.h>
+#include <linux/leds.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <plat/board.h>
#include <plat/keypad.h>
#include <plat/usb.h>
+#include <plat/mmc.h>
#include <mach/irqs.h>
#define OMAP_LCDC_CTRL_LCD_EN (1 << 0)
#define OMAP_LCDC_STAT_DONE (1 << 0)
-static struct omap_lcd_config htcherald_lcd_config __initdata = {
- .ctrl_name = "internal",
-};
+/* GPIO definitions for the power button and keyboard slide switch */
+#define HTCHERALD_GPIO_POWER 139
+#define HTCHERALD_GPIO_SLIDE 174
+#define HTCHERALD_GIRQ_BTNS 141
-static struct omap_board_config_kernel htcherald_config[] __initdata = {
- { OMAP_TAG_LCD, &htcherald_lcd_config },
-};
+/* GPIO definitions for the touchscreen */
+#define HTCHERALD_GPIO_TS 76
+
+/* HTCPLD definitions */
+
+/*
+ * CPLD Logic
+ *
+ * Chip 3 - 0x03
+ *
+ * Function 7 6 5 4 3 2 1 0
+ * ------------------------------------
+ * DPAD light x x x x x x x 1
+ * SoundDev x x x x 1 x x x
+ * Screen white 1 x x x x x x x
+ * MMC power on x x x x x 1 x x
+ * Happy times (n) 0 x x x x 1 x x
+ *
+ * Chip 4 - 0x04
+ *
+ * Function 7 6 5 4 3 2 1 0
+ * ------------------------------------
+ * Keyboard light x x x x x x x 1
+ * LCD Bright (4) x x x x x 1 1 x
+ * LCD Bright (3) x x x x x 0 1 x
+ * LCD Bright (2) x x x x x 1 0 x
+ * LCD Bright (1) x x x x x 0 0 x
+ * LCD Off x x x x 0 x x x
+ * LCD image (fb) 1 x x x x x x x
+ * LCD image (white) 0 x x x x x x x
+ * Caps lock LED x x 1 x x x x x
+ *
+ * Chip 5 - 0x05
+ *
+ * Function 7 6 5 4 3 2 1 0
+ * ------------------------------------
+ * Red (solid) x x x x x 1 x x
+ * Red (flash) x x x x x x 1 x
+ * Green (GSM flash) x x x x 1 x x x
+ * Green (GSM solid) x x x 1 x x x x
+ * Green (wifi flash) x x 1 x x x x x
+ * Blue (bt flash) x 1 x x x x x x
+ * DPAD Int Enable 1 x x x x x x 0
+ *
+ * (Combinations of the above can be made for different colors.)
+ * The direction pad interrupt enable must be set each time the
+ * interrupt is handled.
+ *
+ * Chip 6 - 0x06
+ *
+ * Function 7 6 5 4 3 2 1 0
+ * ------------------------------------
+ * Vibrator x x x x 1 x x x
+ * Alt LED x x x 1 x x x x
+ * Screen white 1 x x x x x x x
+ * Screen white x x 1 x x x x x
+ * Screen white x 0 x x x x x x
+ * Enable kbd dpad x x x x x x 0 x
+ * Happy Times 0 1 0 x x x 0 x
+ */
+
+/*
+ * HTCPLD GPIO lines start 16 after OMAP_MAX_GPIO_LINES to account
+ * for the 16 MPUIO lines.
+ */
+#define HTCPLD_GPIO_START_OFFSET (OMAP_MAX_GPIO_LINES + 16)
+#define HTCPLD_IRQ(chip, offset) (OMAP_IRQ_END + 8 * (chip) + (offset))
+#define HTCPLD_BASE(chip, offset) \
+ (HTCPLD_GPIO_START_OFFSET + 8 * (chip) + (offset))
+
+#define HTCPLD_GPIO_LED_DPAD HTCPLD_BASE(0, 0)
+#define HTCPLD_GPIO_LED_KBD HTCPLD_BASE(1, 0)
+#define HTCPLD_GPIO_LED_CAPS HTCPLD_BASE(1, 5)
+#define HTCPLD_GPIO_LED_RED_FLASH HTCPLD_BASE(2, 1)
+#define HTCPLD_GPIO_LED_RED_SOLID HTCPLD_BASE(2, 2)
+#define HTCPLD_GPIO_LED_GREEN_FLASH HTCPLD_BASE(2, 3)
+#define HTCPLD_GPIO_LED_GREEN_SOLID HTCPLD_BASE(2, 4)
+#define HTCPLD_GPIO_LED_WIFI HTCPLD_BASE(2, 5)
+#define HTCPLD_GPIO_LED_BT HTCPLD_BASE(2, 6)
+#define HTCPLD_GPIO_LED_VIBRATE HTCPLD_BASE(3, 3)
+#define HTCPLD_GPIO_LED_ALT HTCPLD_BASE(3, 4)
+
+#define HTCPLD_GPIO_RIGHT_KBD HTCPLD_BASE(6, 7)
+#define HTCPLD_GPIO_UP_KBD HTCPLD_BASE(6, 6)
+#define HTCPLD_GPIO_LEFT_KBD HTCPLD_BASE(6, 5)
+#define HTCPLD_GPIO_DOWN_KBD HTCPLD_BASE(6, 4)
+
+#define HTCPLD_GPIO_RIGHT_DPAD HTCPLD_BASE(7, 7)
+#define HTCPLD_GPIO_UP_DPAD HTCPLD_BASE(7, 6)
+#define HTCPLD_GPIO_LEFT_DPAD HTCPLD_BASE(7, 5)
+#define HTCPLD_GPIO_DOWN_DPAD HTCPLD_BASE(7, 4)
+#define HTCPLD_GPIO_ENTER_DPAD HTCPLD_BASE(7, 3)
+
+/*
+ * The htcpld chip requires a gpio write to a specific line
+ * to re-enable interrupts after one has occurred.
+ */
+#define HTCPLD_GPIO_INT_RESET_HI HTCPLD_BASE(2, 7)
+#define HTCPLD_GPIO_INT_RESET_LO HTCPLD_BASE(2, 0)
+
+/* Chip 5 */
+#define HTCPLD_IRQ_RIGHT_KBD HTCPLD_IRQ(0, 7)
+#define HTCPLD_IRQ_UP_KBD HTCPLD_IRQ(0, 6)
+#define HTCPLD_IRQ_LEFT_KBD HTCPLD_IRQ(0, 5)
+#define HTCPLD_IRQ_DOWN_KBD HTCPLD_IRQ(0, 4)
+
+/* Chip 6 */
+#define HTCPLD_IRQ_RIGHT_DPAD HTCPLD_IRQ(1, 7)
+#define HTCPLD_IRQ_UP_DPAD HTCPLD_IRQ(1, 6)
+#define HTCPLD_IRQ_LEFT_DPAD HTCPLD_IRQ(1, 5)
+#define HTCPLD_IRQ_DOWN_DPAD HTCPLD_IRQ(1, 4)
+#define HTCPLD_IRQ_ENTER_DPAD HTCPLD_IRQ(1, 3)
/* Keyboard definition */
.resource = kp_resources,
};
+/* GPIO buttons for keyboard slide and power button */
+static struct gpio_keys_button herald_gpio_keys_table[] = {
+ {BTN_0, HTCHERALD_GPIO_POWER, 1, "POWER", EV_KEY, 1, 20},
+ {SW_LID, HTCHERALD_GPIO_SLIDE, 0, "SLIDE", EV_SW, 1, 20},
+
+ {KEY_LEFT, HTCPLD_GPIO_LEFT_KBD, 1, "LEFT", EV_KEY, 1, 20},
+ {KEY_RIGHT, HTCPLD_GPIO_RIGHT_KBD, 1, "RIGHT", EV_KEY, 1, 20},
+ {KEY_UP, HTCPLD_GPIO_UP_KBD, 1, "UP", EV_KEY, 1, 20},
+ {KEY_DOWN, HTCPLD_GPIO_DOWN_KBD, 1, "DOWN", EV_KEY, 1, 20},
+
+ {KEY_LEFT, HTCPLD_GPIO_LEFT_DPAD, 1, "DLEFT", EV_KEY, 1, 20},
+ {KEY_RIGHT, HTCPLD_GPIO_RIGHT_DPAD, 1, "DRIGHT", EV_KEY, 1, 20},
+ {KEY_UP, HTCPLD_GPIO_UP_DPAD, 1, "DUP", EV_KEY, 1, 20},
+ {KEY_DOWN, HTCPLD_GPIO_DOWN_DPAD, 1, "DDOWN", EV_KEY, 1, 20},
+ {KEY_ENTER, HTCPLD_GPIO_ENTER_DPAD, 1, "DENTER", EV_KEY, 1, 20},
+};
+
+static struct gpio_keys_platform_data herald_gpio_keys_data = {
+ .buttons = herald_gpio_keys_table,
+ .nbuttons = ARRAY_SIZE(herald_gpio_keys_table),
+ .rep = 1,
+};
+
+static struct platform_device herald_gpiokeys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &herald_gpio_keys_data,
+ },
+};
+
+/* LEDs for the Herald. These connect to the HTCPLD GPIO device. */
+static struct gpio_led gpio_leds[] = {
+ {"dpad", NULL, HTCPLD_GPIO_LED_DPAD, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"kbd", NULL, HTCPLD_GPIO_LED_KBD, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"vibrate", NULL, HTCPLD_GPIO_LED_VIBRATE, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"green_solid", NULL, HTCPLD_GPIO_LED_GREEN_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"green_flash", NULL, HTCPLD_GPIO_LED_GREEN_FLASH, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"red_solid", "mmc0", HTCPLD_GPIO_LED_RED_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"red_flash", NULL, HTCPLD_GPIO_LED_RED_FLASH, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"wifi", NULL, HTCPLD_GPIO_LED_WIFI, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"bt", NULL, HTCPLD_GPIO_LED_BT, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"caps", NULL, HTCPLD_GPIO_LED_CAPS, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"alt", NULL, HTCPLD_GPIO_LED_ALT, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+};
+
+static struct gpio_led_platform_data gpio_leds_data = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device gpio_leds_device = {
+ .name = "leds-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &gpio_leds_data,
+ },
+};
+
+/* HTC PLD chips */
+
+static struct resource htcpld_resources[] = {
+ [0] = {
+ .start = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS),
+ .end = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct htcpld_chip_platform_data htcpld_chips[] = {
+ [0] = {
+ .addr = 0x03,
+ .reset = 0x04,
+ .num_gpios = 8,
+ .gpio_out_base = HTCPLD_BASE(0, 0),
+ .gpio_in_base = HTCPLD_BASE(4, 0),
+ },
+ [1] = {
+ .addr = 0x04,
+ .reset = 0x8e,
+ .num_gpios = 8,
+ .gpio_out_base = HTCPLD_BASE(1, 0),
+ .gpio_in_base = HTCPLD_BASE(5, 0),
+ },
+ [2] = {
+ .addr = 0x05,
+ .reset = 0x80,
+ .num_gpios = 8,
+ .gpio_out_base = HTCPLD_BASE(2, 0),
+ .gpio_in_base = HTCPLD_BASE(6, 0),
+ .irq_base = HTCPLD_IRQ(0, 0),
+ .num_irqs = 8,
+ },
+ [3] = {
+ .addr = 0x06,
+ .reset = 0x40,
+ .num_gpios = 8,
+ .gpio_out_base = HTCPLD_BASE(3, 0),
+ .gpio_in_base = HTCPLD_BASE(7, 0),
+ .irq_base = HTCPLD_IRQ(1, 0),
+ .num_irqs = 8,
+ },
+};
+
+struct htcpld_core_platform_data htcpld_pfdata = {
+ .int_reset_gpio_hi = HTCPLD_GPIO_INT_RESET_HI,
+ .int_reset_gpio_lo = HTCPLD_GPIO_INT_RESET_LO,
+ .i2c_adapter_id = 1,
+
+ .chip = htcpld_chips,
+ .num_chip = ARRAY_SIZE(htcpld_chips),
+};
+
+static struct platform_device htcpld_device = {
+ .name = "i2c-htcpld",
+ .id = -1,
+ .resource = htcpld_resources,
+ .num_resources = ARRAY_SIZE(htcpld_resources),
+ .dev = {
+ .platform_data = &htcpld_pfdata,
+ },
+};
+
/* USB Device */
static struct omap_usb_config htcherald_usb_config __initdata = {
.otg = 0,
};
/* LCD Device resources */
+static struct omap_lcd_config htcherald_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static struct omap_board_config_kernel htcherald_config[] __initdata = {
+ { OMAP_TAG_LCD, &htcherald_lcd_config },
+};
+
static struct platform_device lcd_device = {
.name = "lcd_htcherald",
.id = -1,
};
+/* MMC Card */
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+static struct omap_mmc_platform_data htc_mmc1_data = {
+ .nr_slots = 1,
+ .switch_slot = NULL,
+ .slots[0] = {
+ .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 |
+ MMC_VDD_32_33 | MMC_VDD_33_34,
+ .name = "mmcblk",
+ .nomux = 1,
+ .wires = 4,
+ .switch_pin = -1,
+ },
+};
+
+static struct omap_mmc_platform_data *htc_mmc_data[1];
+#endif
+
+
+/* Platform devices for the Herald */
static struct platform_device *devices[] __initdata = {
&kp_device,
&lcd_device,
+ &htcpld_device,
+ &gpio_leds_device,
+ &herald_gpiokeys_device,
+};
+
+/*
+ * Touchscreen
+ */
+static const struct ads7846_platform_data htcherald_ts_platform_data = {
+ .model = 7846,
+ .keep_vref_on = 1,
+ .x_plate_ohms = 496,
+ .gpio_pendown = HTCHERALD_GPIO_TS,
+ .pressure_max = 100000,
+ .pressure_min = 5000,
+ .x_min = 528,
+ .x_max = 3760,
+ .y_min = 624,
+ .y_max = 3760,
+};
+
+static struct spi_board_info __initdata htcherald_spi_board_info[] = {
+ {
+ .modalias = "ads7846",
+ .platform_data = &htcherald_ts_platform_data,
+ .irq = OMAP_GPIO_IRQ(HTCHERALD_GPIO_TS),
+ .max_speed_hz = 2500000,
+ .bus_num = 2,
+ .chip_select = 1,
+ }
};
/*
{
printk(KERN_INFO "HTC Herald init.\n");
+ /* Do board initialization before we register all the devices */
omap_gpio_init();
omap_board_config = htcherald_config;
htcherald_usb_enable();
omap1_usb_init(&htcherald_usb_config);
+
+ spi_register_board_info(htcherald_spi_board_info,
+ ARRAY_SIZE(htcherald_spi_board_info));
+
+ omap_register_i2c_bus(1, 100, NULL, 0);
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+ htc_mmc_data[0] = &htc_mmc1_data;
+ omap1_init_mmc(htc_mmc_data, 1);
+#endif
}
static void __init htcherald_init_irq(void)
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o
-omap-2-3-common = irq.o sdrc.o
+omap-2-3-common = irq.o sdrc.o prm2xxx_3xxx.o
hwmod-common = omap_hwmod.o \
omap_hwmod_common_data.o
prcm-common = prcm.o powerdomain.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
-obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common) $(hwmod-common)
+obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common) prm44xx.o $(hwmod-common)
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * This code manages "OMAP modules" (on-chip devices) and their
- * integration with Linux device driver and bus code.
- *
- * References:
+ * Introduction
+ * ------------
+ * One way to view an OMAP SoC is as a collection of largely unrelated
+ * IP blocks connected by interconnects. The IP blocks include
+ * devices such as ARM processors, audio serial interfaces, UARTs,
+ * etc. Some of these devices, like the DSP, are created by TI;
+ * others, like the SGX, largely originate from external vendors. In
+ * TI's documentation, on-chip devices are referred to as "OMAP
+ * modules." Some of these IP blocks are identical across several
+ * OMAP versions. Others are revised frequently.
+ *
+ * These OMAP modules are tied together by various interconnects.
+ * Most of the address and data flow between modules is via OCP-based
+ * interconnects such as the L3 and L4 buses; but there are other
+ * interconnects that distribute the hardware clock tree, handle idle
+ * and reset signaling, supply power, and connect the modules to
+ * various pads or balls on the OMAP package.
+ *
+ * OMAP hwmod provides a consistent way to describe the on-chip
+ * hardware blocks and their integration into the rest of the chip.
+ * This description can be automatically generated from the TI
+ * hardware database. OMAP hwmod provides a standard, consistent API
+ * to reset, enable, idle, and disable these hardware blocks. And
+ * hwmod provides a way for other core code, such as the Linux device
+ * code or the OMAP power management and address space mapping code,
+ * to query the hardware database.
+ *
+ * Using hwmod
+ * -----------
+ * Drivers won't call hwmod functions directly. That is done by the
+ * omap_device code, and in rare occasions, by custom integration code
+ * in arch/arm/ *omap*. The omap_device code includes functions to
+ * build a struct platform_device using omap_hwmod data, and that is
+ * currently how hwmod data is communicated to drivers and to the
+ * Linux driver model. Most drivers will call omap_hwmod functions only
+ * indirectly, via pm_runtime*() functions.
+ *
+ * From a layering perspective, here is where the OMAP hwmod code
+ * fits into the kernel software stack:
+ *
+ * +-------------------------------+
+ * | Device driver code |
+ * | (e.g., drivers/) |
+ * +-------------------------------+
+ * | Linux driver model |
+ * | (platform_device / |
+ * | platform_driver data/code) |
+ * +-------------------------------+
+ * | OMAP core-driver integration |
+ * |(arch/arm/mach-omap2/devices.c)|
+ * +-------------------------------+
+ * | omap_device code |
+ * | (../plat-omap/omap_device.c) |
+ * +-------------------------------+
+ * ----> | omap_hwmod code/data | <-----
+ * | (../mach-omap2/omap_hwmod*) |
+ * +-------------------------------+
+ * | OMAP clock/PRCM/register fns |
+ * | (__raw_{read,write}l, clk*) |
+ * +-------------------------------+
+ *
+ * Device drivers should not contain any OMAP-specific code or data in
+ * them. They should only contain code to operate the IP block that
+ * the driver is responsible for. This is because these IP blocks can
+ * also appear in other SoCs, either from TI (such as DaVinci) or from
+ * other manufacturers; and drivers should be reusable across other
+ * platforms.
+ *
+ * The OMAP hwmod code also will attempt to reset and idle all on-chip
+ * devices upon boot. The goal here is for the kernel to be
+ * completely self-reliant and independent from bootloaders. This is
+ * to ensure a repeatable configuration, both to ensure consistent
+ * runtime behavior, and to make it easier for others to reproduce
+ * bugs.
+ *
+ * OMAP module activity states
+ * ---------------------------
+ * The hwmod code considers modules to be in one of several activity
+ * states. IP blocks start out in an UNKNOWN state, then once they
+ * are registered via the hwmod code, proceed to the REGISTERED state.
+ * Once their clock names are resolved to clock pointers, the module
+ * enters the CLKS_INITED state; and finally, once the module has been
+ * reset and the integration registers programmed, the INITIALIZED state
+ * is entered. The hwmod code will then place the module into either
+ * the IDLE state to save power, or in the case of a critical system
+ * module, the ENABLED state.
+ *
+ * OMAP core integration code can then call omap_hwmod*() functions
+ * directly to move the module between the IDLE, ENABLED, and DISABLED
+ * states, as needed. This is done during both the PM idle loop, and
+ * in the OMAP core integration code's implementation of the PM runtime
+ * functions.
+ *
+ * References
+ * ----------
+ * This is a partial list.
* - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064)
* - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090)
* - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108)
#include <plat/powerdomain.h>
#include <plat/clock.h>
#include <plat/omap_hwmod.h>
+#include <plat/prcm.h>
#include "cm.h"
+#include "prm.h"
-/* Maximum microseconds to wait for OMAP module to reset */
-#define MAX_MODULE_RESET_WAIT 10000
+/* Maximum microseconds to wait for OMAP module to softreset */
+#define MAX_MODULE_SOFTRESET_WAIT 10000
/* Name of the OMAP hwmod for the MPU */
#define MPU_INITIATOR_NAME "mpu"
return 0;
}
+static void _enable_optional_clocks(struct omap_hwmod *oh)
+{
+ struct omap_hwmod_opt_clk *oc;
+ int i;
+
+ pr_debug("omap_hwmod: %s: enabling optional clocks\n", oh->name);
+
+ for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+ if (oc->_clk) {
+ pr_debug("omap_hwmod: enable %s:%s\n", oc->role,
+ oc->_clk->name);
+ clk_enable(oc->_clk);
+ }
+}
+
+static void _disable_optional_clocks(struct omap_hwmod *oh)
+{
+ struct omap_hwmod_opt_clk *oc;
+ int i;
+
+ pr_debug("omap_hwmod: %s: disabling optional clocks\n", oh->name);
+
+ for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+ if (oc->_clk) {
+ pr_debug("omap_hwmod: disable %s:%s\n", oc->role,
+ oc->_clk->name);
+ clk_disable(oc->_clk);
+ }
+}
+
/**
* _find_mpu_port_index - find hwmod OCP slave port ID intended for MPU use
* @oh: struct omap_hwmod *
}
/**
- * _sysc_enable - try to bring a module out of idle via OCP_SYSCONFIG
+ * _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG
* @oh: struct omap_hwmod *
*
* If module is marked as SWSUP_SIDLE, force the module out of slave
* as SWSUP_MSUSPEND, force the module out of master standby;
* otherwise, configure it for smart-standby. No return value.
*/
-static void _sysc_enable(struct omap_hwmod *oh)
+static void _enable_sysc(struct omap_hwmod *oh)
{
u8 idlemode, sf;
u32 v;
_set_module_autoidle(oh, idlemode, &v);
}
- /* XXX OCP ENAWAKEUP bit? */
-
/*
* XXX The clock framework should handle this, by
* calling into this code. But this must wait until the
_set_clockactivity(oh, oh->class->sysc->clockact, &v);
_write_sysconfig(v, oh);
+
+ /* If slave is in SMARTIDLE, also enable wakeup */
+ if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE))
+ _enable_wakeup(oh);
}
/**
- * _sysc_idle - try to put a module into idle via OCP_SYSCONFIG
+ * _idle_sysc - try to put a module into idle via OCP_SYSCONFIG
* @oh: struct omap_hwmod *
*
* If module is marked as SWSUP_SIDLE, force the module into slave
* as SWSUP_MSUSPEND, force the module into master standby; otherwise,
* configure it for smart-standby. No return value.
*/
-static void _sysc_idle(struct omap_hwmod *oh)
+static void _idle_sysc(struct omap_hwmod *oh)
{
u8 idlemode, sf;
u32 v;
}
/**
- * _sysc_shutdown - force a module into idle via OCP_SYSCONFIG
+ * _shutdown_sysc - force a module into idle via OCP_SYSCONFIG
* @oh: struct omap_hwmod *
*
* Force the module into slave idle and master suspend. No return
* value.
*/
-static void _sysc_shutdown(struct omap_hwmod *oh)
+static void _shutdown_sysc(struct omap_hwmod *oh)
{
u32 v;
u8 sf;
* @data: not used; pass NULL
*
* Called by omap_hwmod_late_init() (after omap2_clk_init()).
- * Resolves all clock names embedded in the hwmod. Must be called
- * with omap_hwmod_mutex held. Returns -EINVAL if the omap_hwmod
- * has not yet been registered or if the clocks have already been
- * initialized, 0 on success, or a non-zero error on failure.
+ * Resolves all clock names embedded in the hwmod. Returns -EINVAL if
+ * the omap_hwmod has not yet been registered or if the clocks have
+ * already been initialized, 0 on success, or a non-zero error on
+ * failure.
*/
static int _init_clocks(struct omap_hwmod *oh, void *data)
{
return ret;
}
+/**
+ * _lookup_hardreset - return the register bit shift for this hwmod/reset line
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line in the context of this hwmod
+ *
+ * Return the bit position of the reset line that match the
+ * input name. Return -ENOENT if not found.
+ */
+static u8 _lookup_hardreset(struct omap_hwmod *oh, const char *name)
+{
+ int i;
+
+ for (i = 0; i < oh->rst_lines_cnt; i++) {
+ const char *rst_line = oh->rst_lines[i].name;
+ if (!strcmp(rst_line, name)) {
+ u8 shift = oh->rst_lines[i].rst_shift;
+ pr_debug("omap_hwmod: %s: _lookup_hardreset: %s: %d\n",
+ oh->name, rst_line, shift);
+
+ return shift;
+ }
+ }
+
+ return -ENOENT;
+}
+
+/**
+ * _assert_hardreset - assert the HW reset line of submodules
+ * contained in the hwmod module.
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line to lookup and assert
+ *
+ * Some IP like dsp, ipu or iva contain processor that require
+ * an HW reset line to be assert / deassert in order to enable fully
+ * the IP.
+ */
+static int _assert_hardreset(struct omap_hwmod *oh, const char *name)
+{
+ u8 shift;
+
+ if (!oh)
+ return -EINVAL;
+
+ shift = _lookup_hardreset(oh, name);
+ if (IS_ERR_VALUE(shift))
+ return shift;
+
+ if (cpu_is_omap24xx() || cpu_is_omap34xx())
+ return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs,
+ shift);
+ else if (cpu_is_omap44xx())
+ return omap4_prm_assert_hardreset(oh->prcm.omap4.rstctrl_reg,
+ shift);
+ else
+ return -EINVAL;
+}
+
+/**
+ * _deassert_hardreset - deassert the HW reset line of submodules contained
+ * in the hwmod module.
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line to look up and deassert
+ *
+ * Some IP like dsp, ipu or iva contain processor that require
+ * an HW reset line to be assert / deassert in order to enable fully
+ * the IP.
+ */
+static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
+{
+ u8 shift;
+ int r;
+
+ if (!oh)
+ return -EINVAL;
+
+ shift = _lookup_hardreset(oh, name);
+ if (IS_ERR_VALUE(shift))
+ return shift;
+
+ if (cpu_is_omap24xx() || cpu_is_omap34xx())
+ r = omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs,
+ shift);
+ else if (cpu_is_omap44xx())
+ r = omap4_prm_deassert_hardreset(oh->prcm.omap4.rstctrl_reg,
+ shift);
+ else
+ return -EINVAL;
+
+ if (r == -EBUSY)
+ pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name);
+
+ return r;
+}
+
+/**
+ * _read_hardreset - read the HW reset line state of submodules
+ * contained in the hwmod module
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line to look up and read
+ *
+ * Return the state of the reset line.
+ */
+static int _read_hardreset(struct omap_hwmod *oh, const char *name)
+{
+ u8 shift;
+
+ if (!oh)
+ return -EINVAL;
+
+ shift = _lookup_hardreset(oh, name);
+ if (IS_ERR_VALUE(shift))
+ return shift;
+
+ if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+ return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs,
+ shift);
+ } else if (cpu_is_omap44xx()) {
+ return omap4_prm_is_hardreset_asserted(oh->prcm.omap4.rstctrl_reg,
+ shift);
+ } else {
+ return -EINVAL;
+ }
+}
+
/**
* _reset - reset an omap_hwmod
* @oh: struct omap_hwmod *
*
* Resets an omap_hwmod @oh via the OCP_SYSCONFIG bit. hwmod must be
- * enabled for this to work. Must be called with omap_hwmod_mutex
- * held. Returns -EINVAL if the hwmod cannot be reset this way or if
- * the hwmod is in the wrong state, -ETIMEDOUT if the module did not
- * reset in time, or 0 upon success.
+ * enabled for this to work. Returns -EINVAL if the hwmod cannot be
+ * reset this way or if the hwmod is in the wrong state, -ETIMEDOUT if
+ * the module did not reset in time, or 0 upon success.
+ *
+ * In OMAP3 a specific SYSSTATUS register is used to get the reset status.
+ * Starting in OMAP4, some IPs does not have SYSSTATUS register and instead
+ * use the SYSCONFIG softreset bit to provide the status.
+ *
+ * Note that some IP like McBSP does have a reset control but no reset status.
*/
static int _reset(struct omap_hwmod *oh)
{
- u32 r, v;
+ u32 v;
int c = 0;
+ int ret = 0;
if (!oh->class->sysc ||
- !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET) ||
- (oh->class->sysc->sysc_flags & SYSS_MISSING))
+ !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET))
return -EINVAL;
/* clocks must be on for this operation */
if (oh->_state != _HWMOD_STATE_ENABLED) {
- WARN(1, "omap_hwmod: %s: reset can only be entered from "
- "enabled state\n", oh->name);
+ pr_warning("omap_hwmod: %s: reset can only be entered from "
+ "enabled state\n", oh->name);
return -EINVAL;
}
+ /* For some modules, all optionnal clocks need to be enabled as well */
+ if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
+ _enable_optional_clocks(oh);
+
pr_debug("omap_hwmod: %s: resetting\n", oh->name);
v = oh->_sysc_cache;
- r = _set_softreset(oh, &v);
- if (r)
- return r;
+ ret = _set_softreset(oh, &v);
+ if (ret)
+ goto dis_opt_clks;
_write_sysconfig(v, oh);
- omap_test_timeout((omap_hwmod_readl(oh, oh->class->sysc->syss_offs) &
- SYSS_RESETDONE_MASK),
- MAX_MODULE_RESET_WAIT, c);
-
- if (c == MAX_MODULE_RESET_WAIT)
- WARN(1, "omap_hwmod: %s: failed to reset in %d usec\n",
- oh->name, MAX_MODULE_RESET_WAIT);
+ if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
+ omap_test_timeout((omap_hwmod_readl(oh,
+ oh->class->sysc->syss_offs)
+ & SYSS_RESETDONE_MASK),
+ MAX_MODULE_SOFTRESET_WAIT, c);
+ else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS)
+ omap_test_timeout(!(omap_hwmod_readl(oh,
+ oh->class->sysc->sysc_offs)
+ & SYSC_TYPE2_SOFTRESET_MASK),
+ MAX_MODULE_SOFTRESET_WAIT, c);
+
+ if (c == MAX_MODULE_SOFTRESET_WAIT)
+ pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
+ oh->name, MAX_MODULE_SOFTRESET_WAIT);
else
- pr_debug("omap_hwmod: %s: reset in %d usec\n", oh->name, c);
+ pr_debug("omap_hwmod: %s: softreset in %d usec\n", oh->name, c);
/*
* XXX add _HWMOD_STATE_WEDGED for modules that don't come back from
* _wait_target_ready() or _reset()
*/
- return (c == MAX_MODULE_RESET_WAIT) ? -ETIMEDOUT : 0;
+ ret = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
+
+dis_opt_clks:
+ if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
+ _disable_optional_clocks(oh);
+
+ return ret;
}
/**
* @oh: struct omap_hwmod *
*
* Enables an omap_hwmod @oh such that the MPU can access the hwmod's
- * register target. Must be called with omap_hwmod_mutex held.
- * Returns -EINVAL if the hwmod is in the wrong state or passes along
- * the return value of _wait_target_ready().
+ * register target. (This function has a full name --
+ * _omap_hwmod_enable() rather than simply _enable() -- because it is
+ * currently required by the pm34xx.c idle loop.) Returns -EINVAL if
+ * the hwmod is in the wrong state or passes along the return value of
+ * _wait_target_ready().
*/
int _omap_hwmod_enable(struct omap_hwmod *oh)
{
pr_debug("omap_hwmod: %s: enabling\n", oh->name);
+ /*
+ * If an IP contains only one HW reset line, then de-assert it in order
+ * to allow to enable the clocks. Otherwise the PRCM will return
+ * Intransition status, and the init will failed.
+ */
+ if ((oh->_state == _HWMOD_STATE_INITIALIZED ||
+ oh->_state == _HWMOD_STATE_DISABLED) && oh->rst_lines_cnt == 1)
+ _deassert_hardreset(oh, oh->rst_lines[0].name);
+
/* XXX mux balls */
_add_initiator_dep(oh, mpu_oh);
if (oh->class->sysc) {
if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED))
_update_sysc_cache(oh);
- _sysc_enable(oh);
+ _enable_sysc(oh);
}
} else {
pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n",
}
/**
- * _idle - idle an omap_hwmod
+ * _omap_hwmod_idle - idle an omap_hwmod
* @oh: struct omap_hwmod *
*
* Idles an omap_hwmod @oh. This should be called once the hwmod has
- * no further work. Returns -EINVAL if the hwmod is in the wrong
- * state or returns 0.
+ * no further work. (This function has a full name --
+ * _omap_hwmod_idle() rather than simply _idle() -- because it is
+ * currently required by the pm34xx.c idle loop.) Returns -EINVAL if
+ * the hwmod is in the wrong state or returns 0.
*/
int _omap_hwmod_idle(struct omap_hwmod *oh)
{
pr_debug("omap_hwmod: %s: idling\n", oh->name);
if (oh->class->sysc)
- _sysc_idle(oh);
+ _idle_sysc(oh);
_del_initiator_dep(oh, mpu_oh);
_disable_clocks(oh);
pr_debug("omap_hwmod: %s: disabling\n", oh->name);
if (oh->class->sysc)
- _sysc_shutdown(oh);
- _del_initiator_dep(oh, mpu_oh);
- /* XXX what about the other system initiators here? DMA, tesla, d2d */
- _disable_clocks(oh);
+ _shutdown_sysc(oh);
+
+ /*
+ * If an IP contains only one HW reset line, then assert it
+ * before disabling the clocks and shutting down the IP.
+ */
+ if (oh->rst_lines_cnt == 1)
+ _assert_hardreset(oh, oh->rst_lines[0].name);
+
+ /* clocks and deps are already disabled in idle */
+ if (oh->_state == _HWMOD_STATE_ENABLED) {
+ _del_initiator_dep(oh, mpu_oh);
+ /* XXX what about the other system initiators here? dma, dsp */
+ _disable_clocks(oh);
+ }
/* XXX Should this code also force-disable the optional clocks? */
/* XXX mux any associated balls to safe mode */
* @skip_setup_idle_p: do not idle hwmods at the end of the fn if 1
*
* Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh
- * OCP_SYSCONFIG register. Must be called with omap_hwmod_mutex held.
- * @skip_setup_idle is intended to be used on a system that will not
- * call omap_hwmod_enable() to enable devices (e.g., a system without
- * PM runtime). Returns -EINVAL if the hwmod is in the wrong state or
- * returns 0.
+ * OCP_SYSCONFIG register. @skip_setup_idle is intended to be used on
+ * a system that will not call omap_hwmod_enable() to enable devices
+ * (e.g., a system without PM runtime). Returns -EINVAL if the hwmod
+ * is in the wrong state or returns 0.
*/
static int _setup(struct omap_hwmod *oh, void *data)
{
}
}
+ mutex_init(&oh->_mutex);
oh->_state = _HWMOD_STATE_INITIALIZED;
+ /*
+ * In the case of hwmod with hardreset that should not be
+ * de-assert at boot time, we have to keep the module
+ * initialized, because we cannot enable it properly with the
+ * reset asserted. Exit without warning because that behavior is
+ * expected.
+ */
+ if ((oh->flags & HWMOD_INIT_NO_RESET) && oh->rst_lines_cnt == 1)
+ return 0;
+
r = _omap_hwmod_enable(oh);
if (r) {
pr_warning("omap_hwmod: %s: cannot be enabled (%d)\n",
}
if (!(oh->flags & HWMOD_INIT_NO_RESET)) {
+ _reset(oh);
+
/*
- * XXX Do the OCP_SYSCONFIG bits need to be
- * reprogrammed after a reset? If not, then this can
- * be removed. If they do, then probably the
- * _omap_hwmod_enable() function should be split to avoid the
- * rewrite of the OCP_SYSCONFIG register.
+ * OCP_SYSCONFIG bits need to be reprogrammed after a softreset.
+ * The _omap_hwmod_enable() function should be split to
+ * avoid the rewrite of the OCP_SYSCONFIG register.
*/
if (oh->class->sysc) {
_update_sysc_cache(oh);
- _sysc_enable(oh);
+ _enable_sysc(oh);
}
}
* omap_hwmod_enable - enable an omap_hwmod
* @oh: struct omap_hwmod *
*
- * Enable an omap_hwomd @oh. Intended to be called by omap_device_enable().
+ * Enable an omap_hwmod @oh. Intended to be called by omap_device_enable().
* Returns -EINVAL on error or passes along the return value from _enable().
*/
int omap_hwmod_enable(struct omap_hwmod *oh)
if (!oh)
return -EINVAL;
- mutex_lock(&omap_hwmod_mutex);
+ mutex_lock(&oh->_mutex);
r = _omap_hwmod_enable(oh);
- mutex_unlock(&omap_hwmod_mutex);
+ mutex_unlock(&oh->_mutex);
return r;
}
* omap_hwmod_idle - idle an omap_hwmod
* @oh: struct omap_hwmod *
*
- * Idle an omap_hwomd @oh. Intended to be called by omap_device_idle().
+ * Idle an omap_hwmod @oh. Intended to be called by omap_device_idle().
* Returns -EINVAL on error or passes along the return value from _idle().
*/
int omap_hwmod_idle(struct omap_hwmod *oh)
if (!oh)
return -EINVAL;
- mutex_lock(&omap_hwmod_mutex);
+ mutex_lock(&oh->_mutex);
_omap_hwmod_idle(oh);
- mutex_unlock(&omap_hwmod_mutex);
+ mutex_unlock(&oh->_mutex);
return 0;
}
* omap_hwmod_shutdown - shutdown an omap_hwmod
* @oh: struct omap_hwmod *
*
- * Shutdown an omap_hwomd @oh. Intended to be called by
+ * Shutdown an omap_hwmod @oh. Intended to be called by
* omap_device_shutdown(). Returns -EINVAL on error or passes along
* the return value from _shutdown().
*/
if (!oh)
return -EINVAL;
- mutex_lock(&omap_hwmod_mutex);
+ mutex_lock(&oh->_mutex);
_shutdown(oh);
- mutex_unlock(&omap_hwmod_mutex);
+ mutex_unlock(&oh->_mutex);
return 0;
}
*/
int omap_hwmod_enable_clocks(struct omap_hwmod *oh)
{
- mutex_lock(&omap_hwmod_mutex);
+ mutex_lock(&oh->_mutex);
_enable_clocks(oh);
- mutex_unlock(&omap_hwmod_mutex);
+ mutex_unlock(&oh->_mutex);
return 0;
}
*/
int omap_hwmod_disable_clocks(struct omap_hwmod *oh)
{
- mutex_lock(&omap_hwmod_mutex);
+ mutex_lock(&oh->_mutex);
_disable_clocks(oh);
- mutex_unlock(&omap_hwmod_mutex);
+ mutex_unlock(&oh->_mutex);
return 0;
}
*
* Under some conditions, a driver may wish to reset the entire device.
* Called from omap_device code. Returns -EINVAL on error or passes along
- * the return value from _reset()/_enable().
+ * the return value from _reset().
*/
int omap_hwmod_reset(struct omap_hwmod *oh)
{
int r;
- if (!oh || !(oh->_state & _HWMOD_STATE_ENABLED))
+ if (!oh)
return -EINVAL;
- mutex_lock(&omap_hwmod_mutex);
+ mutex_lock(&oh->_mutex);
r = _reset(oh);
- if (!r)
- r = _omap_hwmod_enable(oh);
- mutex_unlock(&omap_hwmod_mutex);
+ mutex_unlock(&oh->_mutex);
return r;
}
{
int ret, i;
- ret = oh->mpu_irqs_cnt + oh->sdma_chs_cnt;
+ ret = oh->mpu_irqs_cnt + oh->sdma_reqs_cnt;
for (i = 0; i < oh->slaves_cnt; i++)
ret += oh->slaves[i]->addr_cnt;
r++;
}
- for (i = 0; i < oh->sdma_chs_cnt; i++) {
- (res + r)->name = (oh->sdma_chs + i)->name;
- (res + r)->start = (oh->sdma_chs + i)->dma_ch;
- (res + r)->end = (oh->sdma_chs + i)->dma_ch;
+ for (i = 0; i < oh->sdma_reqs_cnt; i++) {
+ (res + r)->name = (oh->sdma_reqs + i)->name;
+ (res + r)->start = (oh->sdma_reqs + i)->dma_req;
+ (res + r)->end = (oh->sdma_reqs + i)->dma_req;
(res + r)->flags = IORESOURCE_DMA;
r++;
}
!(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
return -EINVAL;
- mutex_lock(&omap_hwmod_mutex);
+ mutex_lock(&oh->_mutex);
_enable_wakeup(oh);
- mutex_unlock(&omap_hwmod_mutex);
+ mutex_unlock(&oh->_mutex);
return 0;
}
!(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
return -EINVAL;
- mutex_lock(&omap_hwmod_mutex);
+ mutex_lock(&oh->_mutex);
_disable_wakeup(oh);
- mutex_unlock(&omap_hwmod_mutex);
+ mutex_unlock(&oh->_mutex);
return 0;
}
+/**
+ * omap_hwmod_assert_hardreset - assert the HW reset line of submodules
+ * contained in the hwmod module.
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line to lookup and assert
+ *
+ * Some IP like dsp, ipu or iva contain processor that require
+ * an HW reset line to be assert / deassert in order to enable fully
+ * the IP. Returns -EINVAL if @oh is null or if the operation is not
+ * yet supported on this OMAP; otherwise, passes along the return value
+ * from _assert_hardreset().
+ */
+int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name)
+{
+ int ret;
+
+ if (!oh)
+ return -EINVAL;
+
+ mutex_lock(&oh->_mutex);
+ ret = _assert_hardreset(oh, name);
+ mutex_unlock(&oh->_mutex);
+
+ return ret;
+}
+
+/**
+ * omap_hwmod_deassert_hardreset - deassert the HW reset line of submodules
+ * contained in the hwmod module.
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line to look up and deassert
+ *
+ * Some IP like dsp, ipu or iva contain processor that require
+ * an HW reset line to be assert / deassert in order to enable fully
+ * the IP. Returns -EINVAL if @oh is null or if the operation is not
+ * yet supported on this OMAP; otherwise, passes along the return value
+ * from _deassert_hardreset().
+ */
+int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name)
+{
+ int ret;
+
+ if (!oh)
+ return -EINVAL;
+
+ mutex_lock(&oh->_mutex);
+ ret = _deassert_hardreset(oh, name);
+ mutex_unlock(&oh->_mutex);
+
+ return ret;
+}
+
+/**
+ * omap_hwmod_read_hardreset - read the HW reset line state of submodules
+ * contained in the hwmod module
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line to look up and read
+ *
+ * Return the current state of the hwmod @oh's reset line named @name:
+ * returns -EINVAL upon parameter error or if this operation
+ * is unsupported on the current OMAP; otherwise, passes along the return
+ * value from _read_hardreset().
+ */
+int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name)
+{
+ int ret;
+
+ if (!oh)
+ return -EINVAL;
+
+ mutex_lock(&oh->_mutex);
+ ret = _read_hardreset(oh, name);
+ mutex_unlock(&oh->_mutex);
+
+ return ret;
+}
+
+
/**
* omap_hwmod_for_each_by_class - call @fn for each hwmod of class @classname
* @classname: struct omap_hwmod_class name to search for
#include "cm.h"
#include "prm.h"
#include "prm-regbits-24xx.h"
+#include "prm-regbits-44xx.h"
static void __iomem *prm_base;
static void __iomem *cm_base;
prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs,
OMAP2_RM_RSTCTRL);
if (cpu_is_omap44xx())
- prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs,
- OMAP4_RM_RSTCTRL);
+ prm_set_mod_reg_bits(OMAP4430_RST_GLOBAL_WARM_SW_MASK,
+ prcm_offs, OMAP4_RM_RSTCTRL);
}
static inline u32 __omap_prcm_read(void __iomem *base, s16 module, u16 reg)
return v;
}
+/* Read a PRM register, AND it, and shift the result down to bit 0 */
+u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask)
+{
+ u32 v;
+
+ v = __raw_readl(reg);
+ v &= mask;
+ v >>= __ffs(mask);
+
+ return v;
+}
+
+/* Read-modify-write a register in a PRM module. Caller must lock */
+u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg)
+{
+ u32 v;
+
+ v = __raw_readl(reg);
+ v &= ~mask;
+ v |= bits;
+ __raw_writel(v, reg);
+
+ return v;
+}
/* Read a register in a CM module */
u32 cm_read_mod_reg(s16 module, u16 idx)
{
* OMAP2/3 Power/Reset Management (PRM) register definitions
*
* Copyright (C) 2007-2009 Texas Instruments, Inc.
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2010 Nokia Corporation
*
* Written by Paul Walmsley
*
return prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
}
+/* These omap2_ PRM functions apply to both OMAP2 and 3 */
+int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift);
+int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
+int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift);
+
+int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift);
+int omap4_prm_assert_hardreset(void __iomem *rstctrl_reg, u8 shift);
+int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift);
+
#endif
/*
#define OMAP_POWERSTATE_MASK (0x3 << 0)
+/*
+ * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
+ * submodule to exit hardreset
+ */
+#define MAX_MODULE_HARDRESET_WAIT 10000
+
+
#endif
--- /dev/null
+/*
+ * OMAP2/3 PRM module functions
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ * Benoît Cousson
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+
+#include <plat/common.h>
+#include <plat/cpu.h>
+#include <plat/prcm.h>
+
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "prm-regbits-34xx.h"
+
+/**
+ * omap2_prm_is_hardreset_asserted - read the HW reset line state of
+ * submodules contained in the hwmod module
+ * @prm_mod: PRM submodule base (e.g. CORE_MOD)
+ * @shift: register bit shift corresponding to the reset line to check
+ *
+ * Returns 1 if the (sub)module hardreset line is currently asserted,
+ * 0 if the (sub)module hardreset line is not currently asserted, or
+ * -EINVAL if called while running on a non-OMAP2/3 chip.
+ */
+int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
+{
+ if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
+ return -EINVAL;
+
+ return prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL,
+ (1 << shift));
+}
+
+/**
+ * omap2_prm_assert_hardreset - assert the HW reset line of a submodule
+ * @prm_mod: PRM submodule base (e.g. CORE_MOD)
+ * @shift: register bit shift corresponding to the reset line to assert
+ *
+ * Some IPs like dsp or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP. These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block. This function will
+ * place the submodule into reset. Returns 0 upon success or -EINVAL
+ * upon an argument error.
+ */
+int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
+{
+ u32 mask;
+
+ if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
+ return -EINVAL;
+
+ mask = 1 << shift;
+ prm_rmw_mod_reg_bits(mask, mask, prm_mod, OMAP2_RM_RSTCTRL);
+
+ return 0;
+}
+
+/**
+ * omap2_prm_deassert_hardreset - deassert a submodule hardreset line and wait
+ * @prm_mod: PRM submodule base (e.g. CORE_MOD)
+ * @shift: register bit shift corresponding to the reset line to deassert
+ *
+ * Some IPs like dsp or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP. These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block. This function will
+ * take the submodule out of reset and wait until the PRCM indicates
+ * that the reset has completed before returning. Returns 0 upon success or
+ * -EINVAL upon an argument error, -EEXIST if the submodule was already out
+ * of reset, or -EBUSY if the submodule did not exit reset promptly.
+ */
+int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift)
+{
+ u32 mask;
+ int c;
+
+ if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
+ return -EINVAL;
+
+ mask = 1 << shift;
+
+ /* Check the current status to avoid de-asserting the line twice */
+ if (prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, mask) == 0)
+ return -EEXIST;
+
+ /* Clear the reset status by writing 1 to the status bit */
+ prm_rmw_mod_reg_bits(0xffffffff, mask, prm_mod, OMAP2_RM_RSTST);
+ /* de-assert the reset control line */
+ prm_rmw_mod_reg_bits(mask, 0, prm_mod, OMAP2_RM_RSTCTRL);
+ /* wait the status to be set */
+ omap_test_timeout(prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTST,
+ mask),
+ MAX_MODULE_HARDRESET_WAIT, c);
+
+ return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
+}
+
--- /dev/null
+/*
+ * OMAP4 PRM module functions
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ * Benoît Cousson
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+
+#include <plat/common.h>
+#include <plat/cpu.h>
+#include <plat/prcm.h>
+
+#include "prm.h"
+#include "prm-regbits-44xx.h"
+
+/*
+ * Address offset (in bytes) between the reset control and the reset
+ * status registers: 4 bytes on OMAP4
+ */
+#define OMAP4_RST_CTRL_ST_OFFSET 4
+
+/**
+ * omap4_prm_is_hardreset_asserted - read the HW reset line state of
+ * submodules contained in the hwmod module
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
+ * @shift: register bit shift corresponding to the reset line to check
+ *
+ * Returns 1 if the (sub)module hardreset line is currently asserted,
+ * 0 if the (sub)module hardreset line is not currently asserted, or
+ * -EINVAL upon parameter error.
+ */
+int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift)
+{
+ if (!cpu_is_omap44xx() || !rstctrl_reg)
+ return -EINVAL;
+
+ return omap4_prm_read_bits_shift(rstctrl_reg, (1 << shift));
+}
+
+/**
+ * omap4_prm_assert_hardreset - assert the HW reset line of a submodule
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
+ * @shift: register bit shift corresponding to the reset line to assert
+ *
+ * Some IPs like dsp, ipu or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP. These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block. This function will
+ * place the submodule into reset. Returns 0 upon success or -EINVAL
+ * upon an argument error.
+ */
+int omap4_prm_assert_hardreset(void __iomem *rstctrl_reg, u8 shift)
+{
+ u32 mask;
+
+ if (!cpu_is_omap44xx() || !rstctrl_reg)
+ return -EINVAL;
+
+ mask = 1 << shift;
+ omap4_prm_rmw_reg_bits(mask, mask, rstctrl_reg);
+
+ return 0;
+}
+
+/**
+ * omap4_prm_deassert_hardreset - deassert a submodule hardreset line and wait
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
+ * @shift: register bit shift corresponding to the reset line to deassert
+ *
+ * Some IPs like dsp, ipu or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP. These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block. This function will
+ * take the submodule out of reset and wait until the PRCM indicates
+ * that the reset has completed before returning. Returns 0 upon success or
+ * -EINVAL upon an argument error, -EEXIST if the submodule was already out
+ * of reset, or -EBUSY if the submodule did not exit reset promptly.
+ */
+int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift)
+{
+ u32 mask;
+ void __iomem *rstst_reg;
+ int c;
+
+ if (!cpu_is_omap44xx() || !rstctrl_reg)
+ return -EINVAL;
+
+ rstst_reg = rstctrl_reg + OMAP4_RST_CTRL_ST_OFFSET;
+
+ mask = 1 << shift;
+
+ /* Check the current status to avoid de-asserting the line twice */
+ if (omap4_prm_read_bits_shift(rstctrl_reg, mask) == 0)
+ return -EEXIST;
+
+ /* Clear the reset status by writing 1 to the status bit */
+ omap4_prm_rmw_reg_bits(0xffffffff, mask, rstst_reg);
+ /* de-assert the reset control line */
+ omap4_prm_rmw_reg_bits(mask, 0, rstctrl_reg);
+ /* wait the status to be set */
+ omap_test_timeout(omap4_prm_read_bits_shift(rstst_reg, mask),
+ MAX_MODULE_HARDRESET_WAIT, c);
+
+ return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
+}
+
*
* These headers and macros are used to define OMAP on-chip module
* data and their integration with other OMAP modules and Linux.
- *
- * References:
- * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064)
- * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090)
- * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108)
- * - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140)
- * - Open Core Protocol Specification 2.2
+ * Copious documentation and references can also be found in the
+ * omap_hwmod code, in arch/arm/mach-omap2/omap_hwmod.c (as of this
+ * writing).
*
* To do:
* - add interconnect error log structures
* - add pinmuxing
* - init_conn_id_bit (CONNID_BIT_VECTOR)
* - implement default hwmod SMS/SDRC flags?
+ * - remove unused fields
*
*/
#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/ioport.h>
+#include <linux/mutex.h>
#include <plat/cpu.h>
struct omap_device;
/**
* struct omap_hwmod_dma_info - DMA channels used by the hwmod
* @name: name of the DMA channel (module local name)
- * @dma_ch: DMA channel ID
+ * @dma_req: DMA request ID
*
* @name should be something short, e.g., "tx" or "rx". It is for use
* by platform_get_resource_byname(). It is defined locally to the
*/
struct omap_hwmod_dma_info {
const char *name;
- u16 dma_ch;
+ u16 dma_req;
+};
+
+/**
+ * struct omap_hwmod_rst_info - IPs reset lines use by hwmod
+ * @name: name of the reset line (module local name)
+ * @rst_shift: Offset of the reset bit
+ *
+ * @name should be something short, e.g., "cpu0" or "rst". It is defined
+ * locally to the hwmod.
+ */
+struct omap_hwmod_rst_info {
+ const char *name;
+ u8 rst_shift;
};
/**
#define SYSC_HAS_CLOCKACTIVITY (1 << 4)
#define SYSC_HAS_SIDLEMODE (1 << 5)
#define SYSC_HAS_MIDLEMODE (1 << 6)
-#define SYSS_MISSING (1 << 7)
+#define SYSS_HAS_RESET_STATUS (1 << 7)
#define SYSC_NO_CACHE (1 << 8) /* XXX SW flag, belongs elsewhere */
+#define SYSC_HAS_RESET_STATUS (1 << 9)
/* omap_hwmod_sysconfig.clockact flags */
#define CLOCKACT_TEST_BOTH 0x0
/**
* struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
* @clkctrl_reg: PRCM address of the clock control register
+ * @rstctrl_reg: adress of the XXX_RSTCTRL register located in the PRM
* @submodule_wkdep_bit: bit shift of the WKDEP range
*/
struct omap_hwmod_omap4_prcm {
void __iomem *clkctrl_reg;
+ void __iomem *rstctrl_reg;
u8 submodule_wkdep_bit;
};
* HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
* HWMOD_NO_IDLEST : this module does not have idle status - this is the case
* only for few initiator modules on OMAP2 & 3.
+ * HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset.
+ * This is needed for devices like DSS that require optional clocks enabled
+ * in order to complete the reset. Optional clocks will be disabled
+ * again after the reset.
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)
#define HWMOD_NO_OCP_AUTOIDLE (1 << 4)
#define HWMOD_SET_DEFAULT_CLOCKACT (1 << 5)
#define HWMOD_NO_IDLEST (1 << 6)
+#define HWMOD_CONTROL_OPT_CLKS_IN_RESET (1 << 7)
/*
* omap_hwmod._int_flags definitions
* @class: struct omap_hwmod_class * to the class of this hwmod
* @od: struct omap_device currently associated with this hwmod (internal use)
* @mpu_irqs: ptr to an array of MPU IRQs (see also mpu_irqs_cnt)
- * @sdma_chs: ptr to an array of SDMA channel IDs (see also sdma_chs_cnt)
+ * @sdma_reqs: ptr to an array of System DMA request IDs (see sdma_reqs_cnt)
* @prcm: PRCM data pertaining to this hwmod
* @main_clk: main clock: OMAP clock name
* @_clk: pointer to the main struct clk (filled in at runtime)
* @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6)
* @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift
* @mpu_irqs_cnt: number of @mpu_irqs
- * @sdma_chs_cnt: number of @sdma_chs
+ * @sdma_reqs_cnt: number of @sdma_reqs
* @opt_clks_cnt: number of @opt_clks
* @master_cnt: number of @master entries
* @slaves_cnt: number of @slave entries
* @_state: internal-use hwmod state
* @flags: hwmod flags (documented below)
* @omap_chip: OMAP chips this hwmod is present on
+ * @_mutex: mutex serializing operations on this hwmod
* @node: list node for hwmod list (internal use)
*
* @main_clk refers to this module's "main clock," which for our
struct omap_hwmod_class *class;
struct omap_device *od;
struct omap_hwmod_irq_info *mpu_irqs;
- struct omap_hwmod_dma_info *sdma_chs;
+ struct omap_hwmod_dma_info *sdma_reqs;
+ struct omap_hwmod_rst_info *rst_lines;
union {
struct omap_hwmod_omap2_prcm omap2;
struct omap_hwmod_omap4_prcm omap4;
void *dev_attr;
u32 _sysc_cache;
void __iomem *_mpu_rt_va;
+ struct mutex _mutex;
struct list_head node;
u16 flags;
u8 _mpu_port_index;
u8 msuspendmux_shift;
u8 response_lat;
u8 mpu_irqs_cnt;
- u8 sdma_chs_cnt;
+ u8 sdma_reqs_cnt;
+ u8 rst_lines_cnt;
u8 opt_clks_cnt;
u8 masters_cnt;
u8 slaves_cnt;
int _omap_hwmod_idle(struct omap_hwmod *oh);
int omap_hwmod_shutdown(struct omap_hwmod *oh);
+int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name);
+int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name);
+int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name);
+
int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
void prm_write_mod_reg(u32 val, s16 module, u16 idx);
u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask);
+u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask);
+u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg);
u32 cm_read_mod_reg(s16 module, u16 idx);
void cm_write_mod_reg(u32 val, s16 module, u16 idx);
u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/clk.h>
#include <plat/omap_device.h>
#include <plat/omap_hwmod.h>
return container_of(pdev, struct omap_device, pdev);
}
+/**
+ * _add_optional_clock_alias - Add clock alias for hwmod optional clocks
+ * @od: struct omap_device *od
+ *
+ * For every optional clock present per hwmod per omap_device, this function
+ * adds an entry in the clocks list of the form <dev-id=dev_name, con-id=role>
+ * if an entry is already present in it with the form <dev-id=NULL, con-id=role>
+ *
+ * The function is called from inside omap_device_build_ss(), after
+ * omap_device_register.
+ *
+ * This allows drivers to get a pointer to its optional clocks based on its role
+ * by calling clk_get(<dev*>, <role>).
+ *
+ * No return value.
+ */
+static void _add_optional_clock_alias(struct omap_device *od,
+ struct omap_hwmod *oh)
+{
+ int i;
+
+ for (i = 0; i < oh->opt_clks_cnt; i++) {
+ struct omap_hwmod_opt_clk *oc;
+ int r;
+
+ oc = &oh->opt_clks[i];
+
+ if (!oc->_clk)
+ continue;
+
+ r = clk_add_alias(oc->role, dev_name(&od->pdev.dev),
+ (char *)oc->clk, &od->pdev.dev);
+ if (r)
+ pr_err("omap_device: %s: clk_add_alias for %s failed\n",
+ dev_name(&od->pdev.dev), oc->role);
+ }
+}
+
/* Public functions for use by core code */
else
ret = omap_device_register(od);
- for (i = 0; i < oh_cnt; i++)
+ for (i = 0; i < oh_cnt; i++) {
hwmods[i]->od = od;
+ _add_optional_clock_alias(od, hwmods[i]);
+ }
if (ret)
goto odbs_exit4;
git.openpandora.org / pandora-kernel.git / commitdiff