mtd: atmel_nand: enable PMECC support for 8k bytes page NAND flash
authorWu, Josh <Josh.wu@atmel.com>
Fri, 18 Oct 2013 09:46:31 +0000 (17:46 +0800)
committerScott Wood <scottwood@freescale.com>
Thu, 21 Nov 2013 19:33:41 +0000 (13:33 -0600)
increase the delay to 75us to support the 8k bytes page nand flash

Signed-off-by: Josh Wu <josh.wu@atmel.com>
drivers/mtd/nand/atmel_nand.c

index 10011c6..1d8c860 100644 (file)
@@ -827,6 +827,7 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
        switch (mtd->writesize) {
        case 2048:
        case 4096:
+       case 8192:
                host->pmecc_degree = (sector_size == 512) ?
                        PMECC_GF_DIMENSION_13 : PMECC_GF_DIMENSION_14;
                host->pmecc_cw_len = (1 << host->pmecc_degree) - 1;
@@ -840,6 +841,13 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
                nand->ecc.steps = 1;
                nand->ecc.bytes = host->pmecc_bytes_per_sector *
                                       host->pmecc_sector_number;
+
+               if (nand->ecc.bytes > MTD_MAX_ECCPOS_ENTRIES_LARGE) {
+                       dev_err(host->dev, "too large eccpos entries. max support ecc.bytes is %d\n",
+                                       MTD_MAX_ECCPOS_ENTRIES_LARGE);
+                       return -EINVAL;
+               }
+
                if (nand->ecc.bytes > mtd->oobsize - 2) {
                        printk(KERN_ERR "No room for ECC bytes\n");
                        return -EINVAL;
@@ -1190,7 +1198,7 @@ int atmel_nand_chip_init(int devnum, ulong base_addr)
 #ifdef CONFIG_SYS_NAND_READY_PIN
        nand->dev_ready = at91_nand_ready;
 #endif
-       nand->chip_delay = 20;
+       nand->chip_delay = 75;
 
        ret = nand_scan_ident(mtd, CONFIG_SYS_NAND_MAX_CHIPS, NULL);
        if (ret)