powerpc: Remove include/linux/harrier_defs.h
authorPaul Mackerras <paulus@samba.org>
Mon, 11 Aug 2008 10:59:59 +0000 (20:59 +1000)
committerPaul Mackerras <paulus@samba.org>
Mon, 11 Aug 2008 11:00:12 +0000 (21:00 +1000)
It was only used by code in arch/ppc, and arch/ppc is gone, so remove
the unused harrier_defs.h as well.

Signed-off-by: Paul Mackerras <paulus@samba.org>
include/linux/harrier_defs.h [deleted file]

diff --git a/include/linux/harrier_defs.h b/include/linux/harrier_defs.h
deleted file mode 100644 (file)
index efef11d..0000000
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * include/linux/harrier_defs.h
- *
- * Definitions for Motorola MCG Harrier North Bridge & Memory controller
- *
- * Author: Dale Farnsworth
- *         dale.farnsworth@mvista.com
- *
- * Extracted from asm-ppc/harrier.h by:
- *        Randy Vinson
- *        rvinson@mvista.com
- *
- * Copyright 2001-2002 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASMPPC_HARRIER_DEFS_H
-#define __ASMPPC_HARRIER_DEFS_H
-
-#define HARRIER_DEFAULT_XCSR_BASE      0xfeff0000
-
-#define HARRIER_VEND_DEV_ID            0x1057480b
-
-#define HARRIER_VENI_OFF               0x00
-
-#define HARRIER_REVI_OFF               0x05
-#define HARRIER_UCTL_OFF               0xd0
-#define HARRIER_XTAL64_MASK            0x02
-
-#define HARRIER_MISC_CSR_OFF           0x1c
-#define HARRIER_RSTOUT                 0x01000000
-#define HARRIER_SYSCON                 0x08000000
-#define HARRIER_EREADY                 0x10000000
-#define HARRIER_ERDYS                  0x20000000
-
-/* Function exception registers */
-#define HARRIER_FEEN_OFF               0x40    /* enable */
-#define HARRIER_FEST_OFF               0x44    /* status */
-#define HARRIER_FEMA_OFF               0x48    /* mask */
-#define HARRIER_FECL_OFF               0x4c    /* clear */
-
-#define HARRIER_FE_DMA                 0x80
-#define HARRIER_FE_MIDB                        0x40
-#define HARRIER_FE_MIM0                        0x20
-#define HARRIER_FE_MIM1                        0x10
-#define HARRIER_FE_MIP                 0x08
-#define HARRIER_FE_UA0                 0x04
-#define HARRIER_FE_UA1                 0x02
-#define HARRIER_FE_ABT                 0x01
-
-#define HARRIER_SERIAL_0_OFF           0xc0
-
-#define HARRIER_MBAR_OFF               0xe0
-#define HARRIER_MBAR_MSK               0xfffc0000
-#define HARRIER_MPIC_CSR_OFF           0xe4
-#define HARRIER_MPIC_OPI_ENABLE                0x40
-#define HARRIER_MPIC_IFEVP_OFF         0x10200
-#define HARRIER_MPIC_IFEVP_VECT_MSK    0xff
-#define HARRIER_MPIC_IFEDE_OFF         0x10210
-
-/*
- * Define the Memory Controller register offsets.
- */
-#define HARRIER_SDBA_OFF               0x110
-#define HARRIER_SDBB_OFF               0x114
-#define HARRIER_SDBC_OFF               0x118
-#define HARRIER_SDBD_OFF               0x11c
-#define HARRIER_SDBE_OFF               0x120
-#define HARRIER_SDBF_OFF               0x124
-#define HARRIER_SDBG_OFF               0x128
-#define HARRIER_SDBH_OFF               0x12c
-
-#define HARRIER_SDB_ENABLE             0x00000100
-#define HARRIER_SDB_SIZE_MASK          0xf
-#define HARRIER_SDB_SIZE_SHIFT         16
-#define HARRIER_SDB_BASE_MASK          0xff
-#define HARRIER_SDB_BASE_SHIFT         24
-
-/*
- * Define outbound register offsets.
- */
-#define HARRIER_OTAD0_OFF              0x220
-#define HARRIER_OTOF0_OFF              0x224
-#define HARRIER_OTAD1_OFF              0x228
-#define HARRIER_OTOF1_OFF              0x22c
-#define HARRIER_OTAD2_OFF              0x230
-#define HARRIER_OTOF2_OFF              0x234
-#define HARRIER_OTAD3_OFF              0x238
-#define HARRIER_OTOF3_OFF              0x23c
-
-#define HARRIER_OTADX_START_MSK                0xffff0000UL
-#define HARRIER_OTADX_END_MSK          0x0000ffffUL
-
-#define HARRIER_OTOFX_OFF_MSK          0xffff0000UL
-#define HARRIER_OTOFX_ENA              0x80UL
-#define HARRIER_OTOFX_WPE              0x10UL
-#define HARRIER_OTOFX_SGE              0x08UL
-#define HARRIER_OTOFX_RAE              0x04UL
-#define HARRIER_OTOFX_MEM              0x02UL
-#define HARRIER_OTOFX_IOM              0x01UL
-
-/*
- * Define generic message passing register offsets
- */
-/* Mirrored registers (visible from both PowerPC and PCI space) */
-#define HARRIER_XCSR_MP_BASE_OFF       0x290   /* base offset in XCSR space */
-#define HARRIER_PMEP_MP_BASE_OFF       0x100   /* base offset in PMEM space */
-#define HARRIER_MGOM0_OFF              0x00    /* outbound msg 0 */
-#define HARRIER_MGOM1_OFF              0x04    /* outbound msg 1 */
-#define HARRIER_MGOD_OFF               0x08    /* outbound doorbells */
-
-#define HARRIER_MGIM0_OFF              0x10    /* inbound msg 0 */
-#define HARRIER_MGIM1_OFF              0x14    /* inbound msg 1 */
-#define HARRIER_MGID_OFF               0x18    /* inbound doorbells */
-
-/* PowerPC-only registers */
-#define HARRIER_MGIDM_OFF              0x20    /* inbound doorbell mask */
-
-/* PCI-only registers */
-#define HARRIER_PMEP_MGST_OFF          0x20    /* (outbound) interrupt status */
-#define HARRIER_PMEP_MGMS_OFF          0x24    /* (outbound) interrupt mask */
-#define HARRIER_MG_OMI0                        (1<<4)
-#define HARRIER_MG_OMI1                        (1<<5)
-
-#define HARRIER_PMEP_MGODM_OFF         0x28    /* outbound doorbell mask */
-
-/*
- * Define PCI configuration space register offsets
- */
-#define HARRIER_XCSR_TO_PCFS_OFF       0x300
-
-/*
- * Define message passing attribute register offset
- */
-#define HARRIER_MPAT_OFF               0x44
-
-/*
- * Define inbound attribute register offsets.
- */
-#define HARRIER_ITSZ0_OFF              0x48
-#define HARRIER_ITAT0_OFF              0x4c
-
-#define HARRIER_ITSZ1_OFF              0x50
-#define HARRIER_ITAT1_OFF              0x54
-
-#define HARRIER_ITSZ2_OFF              0x58
-#define HARRIER_ITAT2_OFF              0x5c
-
-#define HARRIER_ITSZ3_OFF              0x60
-#define HARRIER_ITAT3_OFF              0x64
-
-/* inbound translation size constants */
-#define HARRIER_ITSZ_MSK               0xff
-#define HARRIER_ITSZ_4KB               0x00
-#define HARRIER_ITSZ_8KB               0x01
-#define HARRIER_ITSZ_16KB              0x02
-#define HARRIER_ITSZ_32KB              0x03
-#define HARRIER_ITSZ_64KB              0x04
-#define HARRIER_ITSZ_128KB             0x05
-#define HARRIER_ITSZ_256KB             0x06
-#define HARRIER_ITSZ_512KB             0x07
-#define HARRIER_ITSZ_1MB               0x08
-#define HARRIER_ITSZ_2MB               0x09
-#define HARRIER_ITSZ_4MB               0x0A
-#define HARRIER_ITSZ_8MB               0x0B
-#define HARRIER_ITSZ_16MB              0x0C
-#define HARRIER_ITSZ_32MB              0x0D
-#define HARRIER_ITSZ_64MB              0x0E
-#define HARRIER_ITSZ_128MB             0x0F
-#define HARRIER_ITSZ_256MB             0x10
-#define HARRIER_ITSZ_512MB             0x11
-#define HARRIER_ITSZ_1GB               0x12
-#define HARRIER_ITSZ_2GB               0x13
-
-/* inbound translation offset */
-#define HARRIER_ITOF_SHIFT             0x10
-#define HARRIER_ITOF_MSK               0xffff
-
-/* inbound translation atttributes */
-#define HARRIER_ITAT_PRE               (1<<3)
-#define HARRIER_ITAT_RAE               (1<<4)
-#define HARRIER_ITAT_WPE               (1<<5)
-#define HARRIER_ITAT_MEM               (1<<6)
-#define HARRIER_ITAT_ENA               (1<<7)
-#define HARRIER_ITAT_GBL               (1<<16)
-
-#define HARRIER_LBA_OFF                        0x80
-#define HARRIER_LBA_MSK                        (1<<31)
-
-#define HARRIER_XCSR_SIZE              1024
-
-/* macros to calculate message passing register offsets */
-#define HARRIER_MP_XCSR(x) ((u32)HARRIER_XCSR_MP_BASE_OFF + (u32)x)
-
-#define HARRIER_MP_PMEP(x) ((u32)HARRIER_PMEP_MP_BASE_OFF + (u32)x)
-
-/*
- * Define PCI configuration space register offsets
- */
-#define HARRIER_MPBAR_OFF              PCI_BASE_ADDRESS_0
-#define HARRIER_ITBAR0_OFF             PCI_BASE_ADDRESS_1
-#define HARRIER_ITBAR1_OFF             PCI_BASE_ADDRESS_2
-#define HARRIER_ITBAR2_OFF             PCI_BASE_ADDRESS_3
-#define HARRIER_ITBAR3_OFF             PCI_BASE_ADDRESS_4
-
-#define HARRIER_XCSR_CONFIG(x) ((u32)HARRIER_XCSR_TO_PCFS_OFF + (u32)x)
-
-#endif                         /* __ASMPPC_HARRIER_DEFS_H */