i2c: pca954x: Add reset GPIO support
authorLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Fri, 29 Nov 2013 00:51:25 +0000 (01:51 +0100)
committerWolfram Sang <wsa@the-dreams.de>
Fri, 3 Jan 2014 16:40:27 +0000 (17:40 +0100)
If a reset GPIO support is specified, request the GPIO and get the chip
out of reset at probe time.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
drivers/i2c/muxes/i2c-mux-pca954x.c

index cc7e7fd..34a3fb6 100644 (file)
@@ -13,6 +13,10 @@ Required Properties:
   - Standard I2C mux properties. See i2c-mux.txt in this directory.
   - I2C child bus nodes. See i2c-mux.txt in this directory.
 
+Optional Properties:
+
+  - reset-gpios: Reference to the GPIO connected to the reset input.
+
 
 Example:
 
index 2880c38..e835304 100644 (file)
  */
 
 #include <linux/device.h>
+#include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/i2c-mux.h>
 #include <linux/i2c/pca954x.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/of_gpio.h>
 #include <linux/slab.h>
 
 #define PCA954X_MAX_NCHANS 8
@@ -185,6 +187,7 @@ static int pca954x_probe(struct i2c_client *client,
 {
        struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent);
        struct pca954x_platform_data *pdata = dev_get_platdata(&client->dev);
+       struct device_node *np = client->dev.of_node;
        int num, force, class;
        struct pca954x *data;
        int ret;
@@ -198,6 +201,22 @@ static int pca954x_probe(struct i2c_client *client,
 
        i2c_set_clientdata(client, data);
 
+       if (IS_ENABLED(CONFIG_OF) && np) {
+               enum of_gpio_flags flags;
+               int gpio;
+
+               /* Get the mux out of reset if a reset GPIO is specified. */
+               gpio = of_get_named_gpio_flags(np, "reset-gpio", 0, &flags);
+               if (gpio_is_valid(gpio)) {
+                       ret = devm_gpio_request_one(&client->dev, gpio,
+                                       flags & OF_GPIO_ACTIVE_LOW ?
+                                       GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
+                                       "pca954x reset");
+                       if (ret < 0)
+                               return ret;
+               }
+       }
+
        /* Write the mux register at addr to verify
         * that the mux is in fact present. This also
         * initializes the mux to disconnected state.