mac80211: adding mac80211_tx_control_flags and HT flags

This patch makes enum from the defines previously dwelled inside
ieee80211_tx_control for better readability.
The patch also addes HT flags, for 802.11n drivers:
- IEEE80211_TXCTL_OFDM_HT: request low-level driver to use HT OFDM rates
- IEEE80211_TXCTL_GREEN_FIELD: use green field protection
- IEEE80211_TXCTL_DUP_DATA: duplicate data on both 20 Mhz channels
- IEEE80211_TXCTL_40_MHZ_WIDTH: send this frame in 40Mhz width
- IEEE80211_TXCTL_SHORT_GI: send this frame with short guard interval

Tx command can be a combination of any of these flags, along with
bitrate represented by ieee80211_rate. this will allow legacy drivers to
switch easily to any 11n rate representation.

Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
CC: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index d002b1c..cde1b49 100644 (file)
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -205,6 +205,58 @@ struct ieee80211_bss_conf {
        bool use_short_preamble;
 };
 
+/**
+ * enum mac80211_tx_control_flags - flags to describe Tx configuration for
+ *                                 the Tx frame
+ *
+ * These flags are used with the @flags member of &ieee80211_tx_control
+ *
+ * @IEEE80211_TXCTL_REQ_TX_STATUS: request TX status callback for this frame.
+ * @IEEE80211_TXCTL_DO_NOT_ENCRYPT: send this frame without encryption;
+ *                                 e.g., for EAPOL frame
+ * @IEEE80211_TXCTL_USE_RTS_CTS: use RTS-CTS before sending frame
+ * @IEEE80211_TXCTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g.,
+ *                                  for combined 802.11g / 802.11b networks)
+ * @IEEE80211_TXCTL_NO_ACK: tell the low level not to wait for an ack
+ * @IEEE80211_TXCTL_RATE_CTRL_PROBE
+ * @EEE80211_TXCTL_CLEAR_PS_FILT: clear powersave filter
+ *                                 for destination station
+ * @IEEE80211_TXCTL_REQUEUE:
+ * @IEEE80211_TXCTL_FIRST_FRAGMENT: this is a first fragment of the frame
+ * @IEEE80211_TXCTL_LONG_RETRY_LIMIT: this frame should be send using the
+ *                                   through set_retry_limit configured long
+ *                                   retry value
+ * @IEEE80211_TXCTL_EAPOL_FRAME: internal to mac80211
+ * @IEEE80211_TXCTL_SEND_AFTER_DTIM: send this frame after DTIM beacon
+ * @IEEE80211_TXCTL_AMPDU: this frame should be sent as part of an A-MPDU
+ * @IEEE80211_TXCTL_OFDM_HT: this frame can be sent in HT OFDM rates
+ * @IEEE80211_TXCTL_GREEN_FIELD: use green field protection for this frame
+ * @IEEE80211_TXCTL_40_MHZ_WIDTH: send this frame using 40 Mhz channel width
+ * @IEEE80211_TXCTL_DUP_DATA: duplicate data frame on both 20 Mhz channels
+ * @IEEE80211_TXCTL_SHORT_GI: send this frame using short guard interval
+ */
+enum mac80211_tx_control_flags {
+       IEEE80211_TXCTL_REQ_TX_STATUS           = (1<<0),
+       IEEE80211_TXCTL_DO_NOT_ENCRYPT          = (1<<1),
+       IEEE80211_TXCTL_USE_RTS_CTS             = (1<<2),
+       IEEE80211_TXCTL_USE_CTS_PROTECT         = (1<<3),
+       IEEE80211_TXCTL_NO_ACK                  = (1<<4),
+       IEEE80211_TXCTL_RATE_CTRL_PROBE         = (1<<5),
+       IEEE80211_TXCTL_CLEAR_PS_FILT           = (1<<6),
+       IEEE80211_TXCTL_REQUEUE                 = (1<<7),
+       IEEE80211_TXCTL_FIRST_FRAGMENT          = (1<<8),
+       IEEE80211_TXCTL_SHORT_PREAMBLE          = (1<<9),
+       IEEE80211_TXCTL_LONG_RETRY_LIMIT        = (1<<10),
+       IEEE80211_TXCTL_EAPOL_FRAME             = (1<<11),
+       IEEE80211_TXCTL_SEND_AFTER_DTIM         = (1<<12),
+       IEEE80211_TXCTL_AMPDU                   = (1<<13),
+       IEEE80211_TXCTL_OFDM_HT                 = (1<<14),
+       IEEE80211_TXCTL_GREEN_FIELD             = (1<<15),
+       IEEE80211_TXCTL_40_MHZ_WIDTH            = (1<<16),
+       IEEE80211_TXCTL_DUP_DATA                = (1<<17),
+       IEEE80211_TXCTL_SHORT_GI                = (1<<18),
+};
+
 /* Transmit control fields. This data structure is passed to low-level driver
  * with each TX frame. The low-level driver is responsible for configuring
  * the hardware to use given values (depending on what is supported). */
@@ -219,42 +271,14 @@ struct ieee80211_tx_control {
        /* retry rate for the last retries */
        struct ieee80211_rate *alt_retry_rate;
 
-#define IEEE80211_TXCTL_REQ_TX_STATUS  (1<<0)/* request TX status callback for
-                                               * this frame */
-#define IEEE80211_TXCTL_DO_NOT_ENCRYPT (1<<1) /* send this frame without
-                                               * encryption; e.g., for EAPOL
-                                               * frames */
-#define IEEE80211_TXCTL_USE_RTS_CTS    (1<<2) /* use RTS-CTS before sending
-                                               * frame */
-#define IEEE80211_TXCTL_USE_CTS_PROTECT        (1<<3) /* use CTS protection for the
-                                               * frame (e.g., for combined
-                                               * 802.11g / 802.11b networks) */
-#define IEEE80211_TXCTL_NO_ACK         (1<<4) /* tell the low level not to
-                                               * wait for an ack */
-#define IEEE80211_TXCTL_RATE_CTRL_PROBE        (1<<5)
-#define IEEE80211_TXCTL_CLEAR_PS_FILT  (1<<6) /* clear powersave filter
-                                               * for destination station */
-#define IEEE80211_TXCTL_REQUEUE                (1<<7)
-#define IEEE80211_TXCTL_FIRST_FRAGMENT (1<<8) /* this is a first fragment of
-                                               * the frame */
-#define IEEE80211_TXCTL_SHORT_PREAMBLE (1<<9)
-#define IEEE80211_TXCTL_LONG_RETRY_LIMIT (1<<10) /* this frame should be send
-                                                 * using the through
-                                                 * set_retry_limit configured
-                                                 * long retry value */
-#define IEEE80211_TXCTL_EAPOL_FRAME    (1<<11) /* internal to mac80211 */
-#define IEEE80211_TXCTL_SEND_AFTER_DTIM        (1<<12) /* send this frame after DTIM
-                                                * beacon */
-#define IEEE80211_TXCTL_AMPDU          (1<<13) /* this frame should be sent
-                                                * as part of an A-MPDU */
-       u32 flags;                             /* tx control flags defined
-                                               * above */
+       u32 flags;              /* tx control flags defined above */
        u8 key_idx;             /* keyidx from hw->set_key(), undefined if
                                 * IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */
        u8 retry_limit;         /* 1 = only first attempt, 2 = one retry, ..
                                 * This could be used when set_retry_limit
                                 * is not implemented by the driver */
-       u8 antenna_sel_tx;      /* 0 = default/diversity, 1 = Ant0, 2 = Ant1 */
+       u8 antenna_sel_tx;      /* 0 = default/diversity, otherwise bit
+                                * position represents antenna number used */
        u8 icv_len;             /* length of the ICV/MIC field in octets */
        u8 iv_len;              /* length of the IV field in octets */
        u8 queue;               /* hardware queue to use for this frame;