/*
* Agere Systems Inc.
- * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
+ * 10/100/1000 Base-T Ethernet Driver for the ET1310 and ET131x series MACs
*
* Copyright * 2005 Agere Systems Inc.
* All rights reserved.
#include <linux/if_arp.h>
#include <linux/ioport.h>
#include <linux/random.h>
+#include <linux/phy.h>
#include "et1310_phy.h"
#include "et131x.h"
+int et131x_mdio_read(struct mii_bus *bus, int phy_addr, int reg)
+{
+ struct net_device *netdev = bus->priv;
+ struct et131x_adapter *adapter = netdev_priv(netdev);
+ u16 value;
+ int ret;
+
+ ret = et131x_phy_mii_read(adapter, phy_addr, reg, &value);
+
+ if (ret < 0)
+ return ret;
+ else
+ return value;
+}
+
+int et131x_mdio_write(struct mii_bus *bus, int phy_addr, int reg, u16 value)
+{
+ struct net_device *netdev = bus->priv;
+ struct et131x_adapter *adapter = netdev_priv(netdev);
+
+ /* mii_write always uses the same phy_addr, xcvr_addr */
+ return et131x_mii_write(adapter, reg, value);
+}
+
+int et131x_mdio_reset(struct mii_bus *bus)
+{
+ struct net_device *netdev = bus->priv;
+ struct et131x_adapter *adapter = netdev_priv(netdev);
+
+ et1310_phy_reset(adapter);
+
+ return 0;
+}
+
/**
* et131x_phy_mii_read - Read from the PHY through the MII Interface on the MAC
* @adapter: pointer to our private adapter structure
{
struct mac_regs __iomem *mac = &adapter->regs->mac;
int status = 0;
- u32 delay;
+ u32 delay = 0;
u32 mii_addr;
u32 mii_cmd;
u32 mii_indicator;
/* Set up the register we need to read from on the correct PHY */
writel(MII_ADDR(xcvr_addr, xcvr_reg), &mac->mii_mgmt_addr);
- /* Kick the read cycle off */
- delay = 0;
-
writel(0x1, &mac->mii_mgmt_cmd);
do {
struct mac_regs __iomem *mac = &adapter->regs->mac;
int status = 0;
u8 xcvr_addr = adapter->stats.xcvr_addr;
- u32 delay;
+ u32 delay = 0;
u32 mii_addr;
u32 mii_cmd;
u32 mii_indicator;
/* Add the value to write to the registers to the mac */
writel(value, &mac->mii_mgmt_ctrl);
- delay = 0;
do {
udelay(50);
--- /dev/null
+/*
+ * Copyright (C) 2011 Mark Einon
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Mark Einon <mark.einon@gmail.com>
+ */
+#include "et131x_version.h"
+#include "et131x_defs.h"
+
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/pci.h>
+
+#include "et131x_adapter.h"
+#include "et131x.h"
+
+static int et131x_get_settings(struct net_device *netdev,
+ struct ethtool_cmd *cmd)
+{
+ struct et131x_adapter *adapter = netdev_priv(netdev);
+
+ return phy_ethtool_gset(adapter->phydev, cmd);
+}
+
+static int et131x_set_settings(struct net_device *netdev,
+ struct ethtool_cmd *cmd)
+{
+ struct et131x_adapter *adapter = netdev_priv(netdev);
+
+ return phy_ethtool_sset(adapter->phydev, cmd);
+}
+
+#define ET131X_DRVINFO_LEN 32 /* value from ethtool.h */
+static void et131x_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *info)
+{
+ struct et131x_adapter *adapter = netdev_priv(netdev);
+
+ strncpy(info->driver, DRIVER_NAME, ET131X_DRVINFO_LEN);
+ strncpy(info->version, DRIVER_VERSION_STRING, ET131X_DRVINFO_LEN);
+ strncpy(info->bus_info, pci_name(adapter->pdev), ET131X_DRVINFO_LEN);
+}
+
+static struct ethtool_ops et131x_ethtool_ops = {
+ .get_settings = et131x_get_settings,
+ .set_settings = et131x_set_settings,
+ .get_drvinfo = et131x_get_drvinfo,
+ .get_link = ethtool_op_get_link,
+};
+
+void et131x_set_ethtool_ops(struct net_device *netdev)
+{
+ SET_ETHTOOL_OPS(netdev, &et131x_ethtool_ops);
+}
+
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/phy.h>
#include <linux/skbuff.h>
#include <linux/if_arp.h>
#include <linux/ioport.h>
*/
int et131x_adapter_setup(struct et131x_adapter *adapter)
{
- int status = 0;
+ int status;
/* Configure the JAGCore */
et131x_configure_global_regs(adapter);
/* Move the following code to Timer function?? */
status = et131x_xcvr_find(adapter);
- if (status != 0)
+ if (status)
dev_warn(&adapter->pdev->dev, "Could not find the xcvr\n");
/* Prepare the TRUEPHY library. */
et131x_rx_dma_memory_free(adapter);
}
+static void et131x_adjust_link(struct net_device *netdev)
+{
+ struct et131x_adapter *adapter = netdev_priv(netdev);
+ struct phy_device *phydev = adapter->phydev;
+ struct address_map __iomem *iomem = adapter->regs;
+
+ u32 pm_csr;
+ u16 bmsr_ints;
+ u16 bmsr_data;
+
+ /* If we are in coma mode, we need to disable it. */
+ pm_csr = readl(&iomem->global.pm_csr);
+ if (pm_csr & ET_PM_PHY_SW_COMA) {
+ /*
+ * Check to see if we are in coma mode and if
+ * so, disable it because we will not be able
+ * to read PHY values until we are out.
+ */
+ et1310_disable_phy_coma(adapter);
+ }
+
+ et131x_mii_read(adapter,
+ (uint8_t) offsetof(struct mi_regs, bmsr),
+ &bmsr_data);
+
+ bmsr_ints = adapter->bmsr ^ bmsr_data;
+ adapter->bmsr = bmsr_data;
+
+ /* Do all the cable in / cable out stuff */
+ et131x_mii_check(adapter, bmsr_data, bmsr_ints);
+
+ phy_print_status(phydev);
+}
+
+int et131x_mii_probe(struct net_device *netdev)
+{
+ struct et131x_adapter *adapter = netdev_priv(netdev);
+ struct phy_device *phydev = NULL;
+
+ phydev = phy_find_first(adapter->mii_bus);
+ if (!phydev) {
+ dev_err(&adapter->pdev->dev, "no PHY found\n");
+ return -ENODEV;
+ }
+
+ phydev = phy_connect(netdev, dev_name(&phydev->dev),
+ &et131x_adjust_link, 0, PHY_INTERFACE_MODE_MII);
+
+ if(IS_ERR(phydev)) {
+ dev_err(&adapter->pdev->dev, "Could not attach to PHY\n");
+ return PTR_ERR(phydev);
+ }
+
+ phydev->supported &= (SUPPORTED_10baseT_Half
+ | SUPPORTED_10baseT_Full
+ | SUPPORTED_100baseT_Half
+ | SUPPORTED_100baseT_Full
+ | SUPPORTED_Autoneg
+ | SUPPORTED_MII
+ | SUPPORTED_TP);
+
+ if (adapter->pdev->device != ET131X_PCI_DEVICE_ID_FAST)
+ phydev->supported |= SUPPORTED_1000baseT_Full;
+
+ phydev->advertising = phydev->supported;
+ adapter->phydev = phydev;
+
+ dev_info(&adapter->pdev->dev, "attached PHY driver [%s] "
+ "(mii_bus:phy_addr=%s)\n",
+ phydev->drv->name, dev_name(&phydev->dev));
+
+ return 0;
+}
+
/**
* et131x_adapter_init
* @adapter: pointer to the private adapter struct
int pm_cap;
struct net_device *netdev;
struct et131x_adapter *adapter;
+ int ii;
- /* Enable the device via the PCI subsystem */
result = pci_enable_device(pdev);
if (result) {
dev_err(&pdev->dev, "pci_enable_device() failed\n");
}
SET_NETDEV_DEV(netdev, &pdev->dev);
+ et131x_set_ethtool_ops(netdev);
adapter = et131x_adapter_init(netdev, pdev);
+
/* Initialise the PCI setup for the device */
et131x_pci_init(adapter, pdev);
adapter->error_timer.function = et131x_error_timer_handler;
adapter->error_timer.data = (unsigned long)adapter;
- /* Initialize link state */
- netif_carrier_off(adapter->netdev);
-
/* Init variable for counting how long we do not have link status */
adapter->boot_coma = 0;
+ et1310_disable_phy_coma(adapter);
+
+ /* Setup the mii_bus struct */
+ adapter->mii_bus = mdiobus_alloc();
+ if (!adapter->mii_bus) {
+ dev_err(&pdev->dev, "Alloc of mii_bus struct failed\n");
+ goto err_mem_free;
+ }
+
+ adapter->mii_bus->name = "et131x_eth_mii";
+ snprintf(adapter->mii_bus->id, MII_BUS_ID_SIZE, "%x",
+ (adapter->pdev->bus->number << 8) | adapter->pdev->devfn);
+ adapter->mii_bus->priv = netdev;
+ adapter->mii_bus->read = et131x_mdio_read;
+ adapter->mii_bus->write = et131x_mdio_write;
+ adapter->mii_bus->reset = et131x_mdio_reset;
+ adapter->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
+ if (!adapter->mii_bus->irq) {
+ dev_err(&pdev->dev, "mii_bus irq allocation failed\n");
+ goto err_mdio_free;
+ }
+
+ for (ii = 0; ii < PHY_MAX_ADDR; ii++)
+ adapter->mii_bus->irq[ii] = PHY_POLL;
+
+ if (mdiobus_register(adapter->mii_bus)) {
+ dev_err(&pdev->dev, "failed to register MII bus\n");
+ mdiobus_free(adapter->mii_bus);
+ goto err_mdio_free_irq;
+ }
+
+ if (et131x_mii_probe(netdev)) {
+ dev_err(&pdev->dev, "failed to probe MII bus\n");
+ goto err_mdio_unregister;
+ }
/* We can enable interrupts now
*
result = register_netdev(netdev);
if (result != 0) {
dev_err(&pdev->dev, "register_netdev() failed\n");
- goto err_mem_free;
+ goto err_mdio_unregister;
}
/* Register the net_device struct with the PCI subsystem. Save a copy
return result;
+err_mdio_unregister:
+ mdiobus_unregister(adapter->mii_bus);
+err_mdio_free_irq:
+ kfree(adapter->mii_bus->irq);
+err_mdio_free:
+ mdiobus_free(adapter->mii_bus);
err_mem_free:
et131x_adapter_memory_free(adapter);
err_iounmap:
*/
static void __devexit et131x_pci_remove(struct pci_dev *pdev)
{
- struct net_device *netdev;
- struct et131x_adapter *adapter;
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct et131x_adapter *adapter = netdev_priv(netdev);
- /* Retrieve the net_device pointer from the pci_dev struct, as well
- * as the private adapter struct
- */
- netdev = pci_get_drvdata(pdev);
- adapter = netdev_priv(netdev);
-
- /* Perform device cleanup */
unregister_netdev(netdev);
+ mdiobus_unregister(adapter->mii_bus);
+ kfree(adapter->mii_bus->irq);
+ mdiobus_free(adapter->mii_bus);
+
et131x_adapter_memory_free(adapter);
iounmap(adapter->regs);
- pci_dev_put(adapter->pdev);
+ pci_dev_put(pdev);
+
free_netdev(netdev);
pci_release_regions(pdev);
pci_disable_device(pdev);
git.openpandora.org / pandora-kernel.git / commitdiff