MIPS: Kconfig: Rename several firmware related config symbols.
authorRalf Baechle <ralf@linux-mips.org>
Thu, 15 Nov 2012 19:48:50 +0000 (20:48 +0100)
committerRalf Baechle <ralf@linux-mips.org>
Thu, 13 Dec 2012 16:02:14 +0000 (17:02 +0100)
With the upcoming merge of the ARC architecture there is a small likelyhood
of conflicting use for the CONFIG_ARC config symbol.  Rename it to
CONFIG_FW_ARC.  Also rename CONFIG_ARC32 to CONFIG_FW_ARC32, CONFIG_ARC64
to CONFIG_FW_ARC64.

For consistence also rename CONFIG_SNIPROM to CONFIG_FW_SNIPROM and
CONFIG_CFE to CONFIG_FW_CFE.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/Kconfig
arch/mips/Makefile
arch/mips/fw/sni/Makefile
arch/mips/include/asm/fw/arc/types.h
arch/mips/include/asm/sgiarcs.h
arch/mips/sibyte/Kconfig
arch/mips/sni/setup.c

index c97fc03..9b3759e 100644 (file)
@@ -109,13 +109,13 @@ config BCM47XX
        select CEVT_R4K
        select CSRC_R4K
        select DMA_NONCOHERENT
+       select FW_CFE
        select HW_HAS_PCI
        select IRQ_CPU
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_LITTLE_ENDIAN
        select GENERIC_GPIO
        select SYS_HAS_EARLY_PRINTK
-       select CFE
        help
         Support for BCM47XX based boards
 
@@ -192,8 +192,8 @@ config MACH_DECSTATION
 
 config MACH_JAZZ
        bool "Jazz family of machines"
-       select ARC
-       select ARC32
+       select FW_ARC
+       select FW_ARC32
        select ARCH_MAY_HAVE_PC_FDC
        select CEVT_R4K
        select CSRC_R4K
@@ -457,8 +457,8 @@ config POWERTV
 
 config SGI_IP22
        bool "SGI IP22 (Indy/Indigo2)"
-       select ARC
-       select ARC32
+       select FW_ARC
+       select FW_ARC32
        select BOOT_ELF32
        select CEVT_R4K
        select CSRC_R4K
@@ -497,8 +497,8 @@ config SGI_IP22
 
 config SGI_IP27
        bool "SGI IP27 (Origin200/2000)"
-       select ARC
-       select ARC64
+       select FW_ARC
+       select FW_ARC64
        select BOOT_ELF64
        select DEFAULT_SGI_PARTITION
        select DMA_COHERENT
@@ -518,8 +518,8 @@ config SGI_IP27
 config SGI_IP28
        bool "SGI IP28 (Indigo2 R10k) (EXPERIMENTAL)"
        depends on EXPERIMENTAL
-       select ARC
-       select ARC64
+       select FW_ARC
+       select FW_ARC64
        select BOOT_ELF64
        select CEVT_R4K
        select CSRC_R4K
@@ -554,8 +554,8 @@ config SGI_IP28
 
 config SGI_IP32
        bool "SGI IP32 (O2)"
-       select ARC
-       select ARC32
+       select FW_ARC
+       select FW_ARC32
        select BOOT_ELF32
        select CEVT_R4K
        select CSRC_R4K
@@ -673,8 +673,8 @@ config SIBYTE_BIGSUR
 
 config SNI_RM
        bool "SNI RM200/300/400"
-       select ARC if CPU_LITTLE_ENDIAN
-       select ARC32 if CPU_LITTLE_ENDIAN
+       select FW_ARC if CPU_LITTLE_ENDIAN
+       select FW_ARC32 if CPU_LITTLE_ENDIAN
        select SNIPROM if CPU_BIG_ENDIAN
        select ARCH_MAY_HAVE_PC_FDC
        select BOOT_ELF32
@@ -908,7 +908,7 @@ config SCHED_OMIT_FRAME_POINTER
 #
 # Select some configuration options automatically based on user selections.
 #
-config ARC
+config FW_ARC
        bool
 
 config ARCH_MAY_HAVE_PC_FDC
@@ -963,7 +963,7 @@ config GPIO_TXX9
        select ARCH_REQUIRE_GPIOLIB
        bool
 
-config CFE
+config FW_CFE
        bool
 
 config ARCH_DMA_ADDR_T_64BIT
@@ -1188,7 +1188,7 @@ config SGI_HAS_I8042
 config DEFAULT_SGI_PARTITION
        bool
 
-config ARC32
+config FW_ARC32
        bool
 
 config SNIPROM
@@ -1221,7 +1221,7 @@ config ARC_PROMLIB
        depends on MACH_JAZZ || SNI_RM || SGI_IP22 || SGI_IP28 || SGI_IP32
        default y
 
-config ARC64
+config FW_ARC64
        bool
 
 config BOOT_ELF64
index 033395e..f5f873e 100644 (file)
@@ -173,9 +173,9 @@ endif
 #
 # Firmware support
 #
-libs-$(CONFIG_ARC)             += arch/mips/fw/arc/
-libs-$(CONFIG_CFE)             += arch/mips/fw/cfe/
-libs-$(CONFIG_SNIPROM)         += arch/mips/fw/sni/
+libs-$(CONFIG_FW_ARC)          += arch/mips/fw/arc/
+libs-$(CONFIG_FW_CFE)          += arch/mips/fw/cfe/
+libs-$(CONFIG_FW_SNIPROM)      += arch/mips/fw/sni/
 libs-y                         += arch/mips/fw/lib/
 
 #
index d9740a3..3f01dd3 100644 (file)
@@ -2,4 +2,4 @@
 # Makefile for the SNI prom monitor routines under Linux.
 #
 
-lib-$(CONFIG_SNIPROM)  += sniprom.o
+lib-$(CONFIG_FW_SNIPROM)       += sniprom.o
index b9adcd6..2b11f87 100644 (file)
@@ -10,7 +10,7 @@
 #define _ASM_ARC_TYPES_H
 
 
-#ifdef CONFIG_ARC32
+#ifdef CONFIG_FW_ARC32
 
 typedef char           CHAR;
 typedef short          SHORT;
@@ -33,9 +33,9 @@ typedef LONG          _PUSHORT;
 typedef LONG           _PULONG;
 typedef LONG           _PVOID;
 
-#endif /* CONFIG_ARC32 */
+#endif /* CONFIG_FW_ARC32 */
 
-#ifdef CONFIG_ARC64
+#ifdef CONFIG_FW_ARC64
 
 typedef char           CHAR;
 typedef short          SHORT;
@@ -57,7 +57,7 @@ typedef USHORT                *_PUSHORT;
 typedef ULONG          *_PULONG;
 typedef VOID           *_PVOID;
 
-#endif /* CONFIG_ARC64  */
+#endif /* CONFIG_FW_ARC64  */
 
 typedef CHAR           *PCHAR;
 typedef SHORT          *PSHORT;
index 1493429..3dce7c7 100644 (file)
@@ -366,7 +366,7 @@ struct linux_smonblock {
  * Macros for calling a 32-bit ARC implementation from 64-bit code
  */
 
-#if defined(CONFIG_64BIT) && defined(CONFIG_ARC32)
+#if defined(CONFIG_64BIT) && defined(CONFIG_FW_ARC32)
 
 #define __arc_clobbers                                                 \
        "$2", "$3" /* ... */, "$8", "$9", "$10", "$11",                         \
@@ -475,10 +475,10 @@ struct linux_smonblock {
        __res;                                                          \
 })
 
-#endif /* defined(CONFIG_64BIT) && defined(CONFIG_ARC32) */
+#endif /* defined(CONFIG_64BIT) && defined(CONFIG_FW_ARC32) */
 
-#if (defined(CONFIG_32BIT) && defined(CONFIG_ARC32)) ||                \
-    (defined(CONFIG_64BIT) && defined(CONFIG_ARC64))
+#if (defined(CONFIG_32BIT) && defined(CONFIG_FW_ARC32)) ||             \
+    (defined(CONFIG_64BIT) && defined(CONFIG_FW_ARC64))
 
 #define ARC_CALL0(dest)                                                        \
 ({     long __res;                                                     \
index 3cd937e..01cc1a7 100644 (file)
@@ -74,7 +74,7 @@ config SIBYTE_SB1xxx_SOC
        select SWAP_IO_SPACE
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_64BIT_KERNEL
-       select CFE
+       select FW_CFE
        select SYS_HAS_EARLY_PRINTK
 
 choice
index 413f17f..d6c7bd4 100644 (file)
 #include <linux/fb.h>
 #include <linux/screen_info.h>
 
-#ifdef CONFIG_ARC
+#ifdef CONFIG_FW_ARC
 #include <asm/fw/arc/types.h>
 #include <asm/sgialib.h>
 #endif
 
-#ifdef CONFIG_SNIPROM
+#ifdef CONFIG_FW_SNIPROM
 #include <asm/mipsprom.h>
 #endif
 
@@ -37,7 +37,7 @@ extern void sni_machine_power_off(void);
 
 static void __init sni_display_setup(void)
 {
-#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) && defined(CONFIG_ARC)
+#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) && defined(CONFIG_FW_ARC)
        struct screen_info *si = &screen_info;
        DISPLAY_STATUS *di;
 
@@ -56,7 +56,7 @@ static void __init sni_display_setup(void)
 
 static void __init sni_console_setup(void)
 {
-#ifndef CONFIG_ARC
+#ifndef CONFIG_FW_ARC
        char *ctype;
        char *cdev;
        char *baud;