error_iio_unreg:
iio_device_unregister(indio_dev);
error_remove_trigger:
- hid_sensor_remove_trigger(indio_dev);
+ hid_sensor_remove_trigger(&accel_state->common_attributes);
error_unreg_buffer_funcs:
iio_triggered_buffer_cleanup(indio_dev);
error_free_dev_mem:
{
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct accel_3d_state *accel_state = iio_priv(indio_dev);
sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ACCEL_3D);
iio_device_unregister(indio_dev);
- hid_sensor_remove_trigger(indio_dev);
+ hid_sensor_remove_trigger(&accel_state->common_attributes);
iio_triggered_buffer_cleanup(indio_dev);
kfree(indio_dev->channels);
mutex_lock(&st->buf_lock);
st->tx[0] = KXSD9_READ(address);
ret = spi_sync_transfer(st->us, xfers, ARRAY_SIZE(xfers));
- if (ret)
- return ret;
- return (((u16)(st->rx[0])) << 8) | (st->rx[1] & 0xF0);
+ if (!ret)
+ ret = (((u16)(st->rx[0])) << 8) | (st->rx[1] & 0xF0);
+ mutex_unlock(&st->buf_lock);
+ return ret;
}
static IIO_CONST_ATTR(accel_scale_available,
} else {
if (!st->caps->has_tsmr) {
dev_err(&pdev->dev, "We don't support non-TSMR adc\n");
+ ret = -ENODEV;
goto error_disable_adc_clk;
}
/* sample rates to sign extension table */
static const int mcp3422_sign_extend[4] = {
- [MCP3422_SRATE_240] = 12,
- [MCP3422_SRATE_60] = 14,
- [MCP3422_SRATE_15] = 16,
- [MCP3422_SRATE_3] = 18 };
+ [MCP3422_SRATE_240] = 11,
+ [MCP3422_SRATE_60] = 13,
+ [MCP3422_SRATE_15] = 15,
+ [MCP3422_SRATE_3] = 17 };
/* Client data (each client gets its own) */
struct mcp3422 {
unsigned long flags,
const struct iio_buffer_setup_ops *setup_ops)
{
+ struct iio_buffer *buffer;
int ret;
- indio_dev->buffer = iio_kfifo_allocate(indio_dev);
- if (!indio_dev->buffer)
+ buffer = iio_kfifo_allocate(indio_dev);
+ if (!buffer)
return -ENOMEM;
+ iio_device_attach_buffer(indio_dev, buffer);
+
ret = request_threaded_irq(irq, pollfunc_th, pollfunc_bh,
flags, indio_dev->name, indio_dev);
if (ret)
return 0;
}
-void hid_sensor_remove_trigger(struct iio_dev *indio_dev)
+void hid_sensor_remove_trigger(struct hid_sensor_common *attrb)
{
- iio_trigger_unregister(indio_dev->trig);
- iio_trigger_free(indio_dev->trig);
- indio_dev->trig = NULL;
+ iio_trigger_unregister(attrb->trigger);
+ iio_trigger_free(attrb->trigger);
}
EXPORT_SYMBOL(hid_sensor_remove_trigger);
dev_err(&indio_dev->dev, "Trigger Register Failed\n");
goto error_free_trig;
}
- indio_dev->trig = trig;
+ indio_dev->trig = attrb->trigger = trig;
return ret;
int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
struct hid_sensor_common *attrb);
-void hid_sensor_remove_trigger(struct iio_dev *indio_dev);
+void hid_sensor_remove_trigger(struct hid_sensor_common *attrb);
#endif
error_iio_unreg:
iio_device_unregister(indio_dev);
error_remove_trigger:
- hid_sensor_remove_trigger(indio_dev);
+ hid_sensor_remove_trigger(&gyro_state->common_attributes);
error_unreg_buffer_funcs:
iio_triggered_buffer_cleanup(indio_dev);
error_free_dev_mem:
{
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D);
iio_device_unregister(indio_dev);
- hid_sensor_remove_trigger(indio_dev);
+ hid_sensor_remove_trigger(&gyro_state->common_attributes);
iio_triggered_buffer_cleanup(indio_dev);
kfree(indio_dev->channels);
config TCS3472
tristate "TAOS TCS3472 color light-to-digital converter"
depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
help
If you say yes here you get support for the TAOS TCS3472
family of color light-to-digital converters with IR filter.
error_iio_unreg:
iio_device_unregister(indio_dev);
error_remove_trigger:
- hid_sensor_remove_trigger(indio_dev);
+ hid_sensor_remove_trigger(&als_state->common_attributes);
error_unreg_buffer_funcs:
iio_triggered_buffer_cleanup(indio_dev);
error_free_dev_mem:
{
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct als_state *als_state = iio_priv(indio_dev);
sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_ALS);
iio_device_unregister(indio_dev);
- hid_sensor_remove_trigger(indio_dev);
+ hid_sensor_remove_trigger(&als_state->common_attributes);
iio_triggered_buffer_cleanup(indio_dev);
kfree(indio_dev->channels);
config MAG3110
tristate "Freescale MAG3110 3-Axis Magnetometer"
depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for the Freescale MAG3110 3-Axis
magnetometer.
error_iio_unreg:
iio_device_unregister(indio_dev);
error_remove_trigger:
- hid_sensor_remove_trigger(indio_dev);
+ hid_sensor_remove_trigger(&magn_state->common_attributes);
error_unreg_buffer_funcs:
iio_triggered_buffer_cleanup(indio_dev);
error_free_dev_mem:
{
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct magn_3d_state *magn_state = iio_priv(indio_dev);
sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D);
iio_device_unregister(indio_dev);
- hid_sensor_remove_trigger(indio_dev);
+ hid_sensor_remove_trigger(&magn_state->common_attributes);
iio_triggered_buffer_cleanup(indio_dev);
kfree(indio_dev->channels);
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
BIT(IIO_CHAN_INFO_SCALE), \
.scan_index = idx, \
- .scan_type = IIO_ST('s', 16, 16, IIO_BE), \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .endianness = IIO_BE, \
+ }, \
}
static const struct iio_chan_spec mag3110_channels[] = {
kfree_skb(skb);
}
-static int btmtk_usb_send_frame(struct sk_buff *skb)
+static int btmtk_usb_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
{
- struct hci_dev *hdev = (struct hci_dev *)skb->dev;
struct btmtk_usb_data *data = hci_get_drvdata(hdev);
struct usb_ctrlrequest *dr;
struct urb *urb;
if (mask) {
if (mask & 0x00ff)
outb(s->state & 0xff, dev->iobase + reg);
- if ((mask & 0xff00) & (s->n_chan > 8))
+ if ((mask & 0xff00) && (s->n_chan > 8))
outb((s->state >> 8) & 0xff, dev->iobase + reg + 1);
- if ((mask & 0xff0000) & (s->n_chan > 16))
+ if ((mask & 0xff0000) && (s->n_chan > 16))
outb((s->state >> 16) & 0xff, dev->iobase + reg + 2);
- if ((mask & 0xff000000) & (s->n_chan > 24))
+ if ((mask & 0xff000000) && (s->n_chan > 24))
outb((s->state >> 24) & 0xff, dev->iobase + reg + 3);
}
* Private helper function: Write setpoint to an application DAC channel.
*/
static void s626_set_dac(struct comedi_device *dev, uint16_t chan,
- unsigned short dacdata)
+ int16_t dacdata)
{
struct s626_private *devpriv = dev->private;
uint16_t signmask;
unsigned char *rx_buf = devpriv->usb_rx_buf;
unsigned char *tx_buf = devpriv->usb_tx_buf;
int reg, cmd;
- int ret;
+ int ret = 0;
if (devpriv->model == VMK8061_MODEL) {
reg = VMK8061_DO_REG;
u8 **c_file, const u8 *endpoint, bool boot_case)
{
long word_length;
- int status;
+ int status = 0;
/*DEBUG("FT1000:REQUEST_CODE_SEGMENT\n");i*/
word_length = get_request_value(ft1000dev);
return status;
}
-
config SENSORS_HMC5843
tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer"
depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
help
Say Y here to add support for the Honeywell HMC5843, HMC5883 and
HMC5883L 3-Axis Magnetometer (digital compass).
obj-$(CONFIG_DRM_IMX_LDB) += imx-ldb.o
obj-$(CONFIG_DRM_IMX_FB_HELPER) += imx-fbdev.o
obj-$(CONFIG_DRM_IMX_IPUV3_CORE) += ipu-v3/
-obj-$(CONFIG_DRM_IMX_IPUV3) += ipuv3-crtc.o ipuv3-plane.o
+
+imx-ipuv3-crtc-objs := ipuv3-crtc.o ipuv3-plane.o
+obj-$(CONFIG_DRM_IMX_IPUV3) += imx-ipuv3-crtc.o
{
return crtc->pipe;
}
+EXPORT_SYMBOL_GPL(imx_drm_crtc_id);
static void imx_drm_driver_lastclose(struct drm_device *drm)
{
struct l_wait_info lwi = { 0 };
int rc = 0;
- if (!thread_is_init(&pinger_thread) &&
- !thread_is_stopped(&pinger_thread))
+ if (thread_is_init(&pinger_thread) ||
+ thread_is_stopped(&pinger_thread))
return -EALREADY;
ptlrpc_pinger_remove_timeouts();
* Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
if (usb->board->flags & GO7007_USB_EZUSB) {
/* Reset buffer in EZ-USB */
- dev_dbg(go->dev, "resetting EZ-USB buffers\n");
+ pr_debug("resetting EZ-USB buffers\n");
if (go7007_usb_vendor_request(go, 0x10, 0, 0, NULL, 0, 0) < 0 ||
go7007_usb_vendor_request(go, 0x10, 0, 0, NULL, 0, 0) < 0)
return -1;
u16 status_reg = 0;
int timeout = 500;
- dev_dbg(go->dev, "WriteInterrupt: %04x %04x\n", addr, data);
+ pr_debug("WriteInterrupt: %04x %04x\n", addr, data);
for (i = 0; i < 100; ++i) {
r = usb_control_msg(usb->usbdev,
int r;
int timeout = 500;
- dev_dbg(go->dev, "WriteInterrupt: %04x %04x\n", addr, data);
+ pr_debug("WriteInterrupt: %04x %04x\n", addr, data);
go->usb_buf[0] = data & 0xff;
go->usb_buf[1] = data >> 8;
go->interrupt_available = 1;
go->interrupt_data = __le16_to_cpu(regs[0]);
go->interrupt_value = __le16_to_cpu(regs[1]);
- dev_dbg(go->dev, "ReadInterrupt: %04x %04x\n",
+ pr_debug("ReadInterrupt: %04x %04x\n",
go->interrupt_value, go->interrupt_data);
}
int transferred, pipe;
int timeout = 500;
- dev_dbg(go->dev, "DownloadBuffer sending %d bytes\n", len);
+ pr_debug("DownloadBuffer sending %d bytes\n", len);
if (usb->board->flags & GO7007_USB_EZUSB)
pipe = usb_sndbulkpipe(usb->usbdev, 2);
!(msgs[i].flags & I2C_M_RD) &&
(msgs[i + 1].flags & I2C_M_RD)) {
#ifdef GO7007_I2C_DEBUG
- dev_dbg(go->dev, "i2c write/read %d/%d bytes on %02x\n",
+ pr_debug("i2c write/read %d/%d bytes on %02x\n",
msgs[i].len, msgs[i + 1].len, msgs[i].addr);
#endif
buf[0] = 0x01;
buf[buf_len++] = msgs[++i].len;
} else if (msgs[i].flags & I2C_M_RD) {
#ifdef GO7007_I2C_DEBUG
- dev_dbg(go->dev, "i2c read %d bytes on %02x\n",
+ pr_debug("i2c read %d bytes on %02x\n",
msgs[i].len, msgs[i].addr);
#endif
buf[0] = 0x01;
buf_len = 4;
} else {
#ifdef GO7007_I2C_DEBUG
- dev_dbg(go->dev, "i2c write %d bytes on %02x\n",
+ pr_debug("i2c write %d bytes on %02x\n",
msgs[i].len, msgs[i].addr);
#endif
buf[0] = 0x00;
char *name;
int video_pipe, i, v_urb_len;
- dev_dbg(go->dev, "probing new GO7007 USB board\n");
+ pr_debug("probing new GO7007 USB board\n");
switch (id->driver_info) {
case GO7007_BOARDID_MATRIX_II:
board = &board_px_tv402u;
break;
case GO7007_BOARDID_LIFEVIEW_LR192:
- dev_err(go->dev, "The Lifeview TV Walker Ultra is not supported. Sorry!\n");
+ dev_err(&intf->dev, "The Lifeview TV Walker Ultra is not supported. Sorry!\n");
return -ENODEV;
name = "Lifeview TV Walker Ultra";
board = &board_lifeview_lr192;
break;
case GO7007_BOARDID_SENSORAY_2250:
- dev_info(go->dev, "Sensoray 2250 found\n");
+ dev_info(&intf->dev, "Sensoray 2250 found\n");
name = "Sensoray 2250/2251";
board = &board_sensoray_2250;
break;
board = &board_ads_usbav_709;
break;
default:
- dev_err(go->dev, "unknown board ID %d!\n",
+ dev_err(&intf->dev, "unknown board ID %d!\n",
(unsigned int)id->driver_info);
return -ENODEV;
}
sizeof(go->name));
break;
default:
- dev_dbg(go->dev, "unable to detect tuner type!\n");
+ pr_debug("unable to detect tuner type!\n");
break;
}
/* Configure tuner mode selection inputs connected
dev_err(nvec->dev,
"RX buffer overflow on %p: "
"Trying to write byte %u of %u\n",
- nvec->rx, nvec->rx->pos, NVEC_MSG_SIZE);
+ nvec->rx, nvec->rx ? nvec->rx->pos : 0,
+ NVEC_MSG_SIZE);
break;
default:
nvec->state = 0;
return _FAIL;
}
+ /* fix bug of flush_cam_entry at STOP AP mode */
+ psta->state |= WIFI_AP_STATE;
+ rtw_indicate_connect(padapter);
pmlmepriv->cur_network.join_res = true;/* for check if already set beacon */
return ret;
}
menuconfig TIDSPBRIDGE
tristate "DSP Bridge driver"
- depends on ARCH_OMAP3 && !ARCH_MULTIPLATFORM
+ depends on ARCH_OMAP3 && !ARCH_MULTIPLATFORM && BROKEN
select MAILBOX
select OMAP2PLUS_MBOX
help
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: Netdevice %s unregistered\n",
pDevice->dev->name, pDevice->apdev->name);
}
- free_netdev(pDevice->apdev);
+ if (pDevice->apdev)
+ free_netdev(pDevice->apdev);
pDevice->apdev = NULL;
pDevice->bEnable8021x = false;
pDevice->bEnableHostWEP = false;
u8 * pbyAgc;
u16 wLengthAgc;
u8 abyArray[256];
+ u8 data;
ntStatus = CONTROLnsRequestIn(pDevice,
MESSAGE_TYPE_READ,
ControlvWriteByte(pDevice,MESSAGE_REQUEST_BBREG,0x0D,0x01);
RFbRFTableDownload(pDevice);
+
+ /* Fix for TX USB resets from vendors driver */
+ CONTROLnsRequestIn(pDevice, MESSAGE_TYPE_READ, USB_REG4,
+ MESSAGE_REQUEST_MEM, sizeof(data), &data);
+
+ data |= 0x2;
+
+ CONTROLnsRequestOut(pDevice, MESSAGE_TYPE_WRITE, USB_REG4,
+ MESSAGE_REQUEST_MEM, sizeof(data), &data);
+
return true;//ntStatus;
}
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "%s: Netdevice %s unregistered\n",
pDevice->dev->name, pDevice->apdev->name);
}
- free_netdev(pDevice->apdev);
+ if (pDevice->apdev)
+ free_netdev(pDevice->apdev);
pDevice->apdev = NULL;
pDevice->bEnable8021x = false;
pDevice->bEnableHostWEP = false;
#define VIAUSB20_PACKET_HEADER 0x04
+#define USB_REG4 0x604
+
typedef struct _CMD_MESSAGE
{
u8 byData[256];
return -ENOMEM;
/* Do not reset an active device! */
- if (bdev->bd_holders)
- return -EBUSY;
+ if (bdev->bd_holders) {
+ ret = -EBUSY;
+ goto out;
+ }
ret = kstrtou16(buf, 10, &do_reset);
if (ret)
- return ret;
+ goto out;
- if (!do_reset)
- return -EINVAL;
+ if (!do_reset) {
+ ret = -EINVAL;
+ goto out;
+ }
/* Make sure all pending I/O is finished */
fsync_bdev(bdev);
+ bdput(bdev);
zram_reset_device(zram, true);
return len;
+
+out:
+ bdput(bdev);
+ return ret;
}
static void __zram_make_request(struct zram *zram, struct bio *bio, int rw)
return next;
}
-/* Encode <page, obj_idx> as a single handle value */
+/*
+ * Encode <page, obj_idx> as a single handle value.
+ * On hardware platforms with physical memory starting at 0x0 the pfn
+ * could be 0 so we ensure that the handle will never be 0 by adjusting the
+ * encoded obj_idx value before encoding.
+ */
static void *obj_location_to_handle(struct page *page, unsigned long obj_idx)
{
unsigned long handle;
}
handle = page_to_pfn(page) << OBJ_INDEX_BITS;
- handle |= (obj_idx & OBJ_INDEX_MASK);
+ handle |= ((obj_idx + 1) & OBJ_INDEX_MASK);
return (void *)handle;
}
-/* Decode <page, obj_idx> pair from the given object handle */
+/*
+ * Decode <page, obj_idx> pair from the given object handle. We adjust the
+ * decoded obj_idx back to its original value since it was adjusted in
+ * obj_location_to_handle().
+ */
static void obj_handle_to_location(unsigned long handle, struct page **page,
unsigned long *obj_idx)
{
*page = pfn_to_page(handle >> OBJ_INDEX_BITS);
- *obj_idx = handle & OBJ_INDEX_MASK;
+ *obj_idx = (handle & OBJ_INDEX_MASK) - 1;
}
static unsigned long obj_idx_to_offset(struct page *page,
#include <linux/hid.h>
#include <linux/hid-sensor-ids.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
/**
* struct hid_sensor_hub_attribute_info - Attribute info
struct platform_device *pdev;
unsigned usage_id;
bool data_ready;
+ struct iio_trigger *trigger;
struct hid_sensor_hub_attribute_info poll;
struct hid_sensor_hub_attribute_info report_state;
struct hid_sensor_hub_attribute_info power_state;
git.openpandora.org / pandora-kernel.git / commitdiff